EN 60584-1:2013
Current
The latest, up-to-date edition.
Thermocouples - Part 1: EMF specifications and tolerances
13-12-2013
FOREWORD
INTRODUCTION
1 Scope
2 Terms and definitions
3 Thermocouple designations
4 EMF - Temperature reference functions
5 Thermocouple tolerances
6 Thermoelectric values at the fixed points of
the ITS-90
Annex A (informative) - Tables for EMF as
a function of temperature
Annex B (informative) - Inverse polynomial
functions
Annex C (informative) - Guidance on the
selection of thermocouples
Bibliography
IEC 60584-1:2013 specifies reference functions and tolerances for letter-designated thermocouples (Types R, S, B, J, T, E, K, N, C and A). Temperatures are expressed in degrees Celsius based on the International Temperature Scale of 1990, ITS-90 (symbol t90), and the EMF (symbol E) is in microvolts. The reference functions are polynomials which express the EMF, E in V, as a function of temperature t90 in °C with the thermocouple reference junctions at 0 °C. Values of EMF at intervals of 1 °C are tabulated in Annex A. This third edition cancels and replaces the second edition published in 1995 and constitutes a technical revision. It includes the following changes: - IEC 60584-1:1995 and IEC 60584-2:1982 have been merged; - the standard is now explicitly based on the reference polynomials which express thermocouple EMF as functions of temperature. The tables derived from the polynomials are given in Annex A; - inverse polynomials expressing temperature as functions of EMF are given in Annex B, but inverse tables are not given; - the range of the polynomial relating the EMF of Type K thermocouples is restricted to 1 300 °C; - values of the Seebeck coefficients are given at intervals of 10 °C; - thermoelectric data (EMF and Seebeck coefficients) are given at the fixed points of the ITS-90; - some guidance is given in Annex C regarding the upper temperature limits and environmental conditions of use for each thermocouple type.
Committee |
CLC/TC 65X
|
DevelopmentNote |
Supersedes HD 446.1. (05/2001) Supersedes EN 60584-2. (12/2013)
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NEN EN IEC 60584-1 : 2013 | Identical |
NBN EN 60584-1 : 2014 | Identical |
PN EN 60584-1 : 2014 | Identical |
BS EN 60584-1:2013 | Identical |
NF EN 60584-1 : 2014 | Identical |
I.S. EN 60584-1:2013 | Identical |
SN EN 60584-1 : 1995 | Identical |
IEC 60584-1:2013 | Identical |
CEI EN 60584-1 : 2014 | Identical |
UNE-EN 60584-1:2013 | Identical |
DIN EN 60584-1 Berichtigung 1:2015-08 | Identical |
PNE-FprEN 60584-1 | Identical |
NEN 10584-1 : 1995 | Identical |
DIN EN 13381-9:2015-09 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
17/30348655 DC : 0 | BS EN ISO 20238 - CONVEYOR BELTS - DRUM FRICTION TESTING |
UNE-EN 50200:2016 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
BS EN 60695-11-3:2012 | Fire hazard testing Test flames. 500 W flames. Apparatus and confirmational test methods |
I.S. EN 1892:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF TENSILE PROPERTIES |
BS EN 60068-3-7:2002 | Environmental testing. Guidance Measurements in temperature chambers for tests A and B (with load) |
DD CEN/TS 15866:2009 | Advanced technical ceramics. Ceramic composites. Determination of the thermal diffusivity of ceramic fibres |
I.S. EN 15157:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
UNI EN 820-4 : 2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
17/30363953 DC : 0 | BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
I.S. EN 12101-2:2017 | SMOKE AND HEAT CONTROL SYSTEMS - PART 2: NATURAL SMOKE AND HEAT EXHAUST VENTILATORS |
I.S. EN 1159-1:2003 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMO-PHYSICAL PROPERTIES - PART 2: DETERMINATION OF THERMAL DIFFUSIVITY |
BS EN 820-4:2009 | Advanced technical ceramics. Thermomechanical properties of monolithic ceramics Determination of flexural creep deformation at elevated temperatures |
I.S. EN 50399:2011 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
CEI UNI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
11/30238482 DC : 0 | BS EN 1458-1 - DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
BS EN 61515:1996 | Mineral insulated thermocouple cables and thermocouples |
BS EN 60068-3-6:2002 | Environmental testing. Guidance Confirmation of the performance of temperature/humidity chambers |
06/30139635 DC : 0 | EN 777-2 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E, SAFETY |
11/30249223 DC : 0 | BS EN 50570 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
09/30171916 DC : DRAFT JAN 2009 | BS EN ISO 9239-1 - REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE |
DD ENV 12789:1998 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength |
PREN 1554 : DRAFT 2011 | CONVEYOR BELTS - DRUM FRICTION TESTING |
CEI EN 60068-3-7 : 2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TEST A AND B (WITH LOAD) |
BS EN 50446:2006 | Straight thermocouple assembly with metal or ceramic protection tube and accessories |
UNI EN 820-5 : 2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
BS EN 50570:2013 | Household and similar electrical appliances. Safety. Particular requirements for commercial electric tumble dryers |
CEN/TR 16988:2016 | Estimation of uncertainty in the single burning item test |
BS EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
I.S. EN 50570:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
17/30363956 DC : 0 | BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
S.R. CEN/TR 16988:2016 | ESTIMATION OF UNCERTAINTY IN THE SINGLE BURNING ITEM TEST |
CEI EN 61515 : 1997 | MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES |
BS EN 60531:2000 | Household electric thermal storage room heaters. Methods for measuring performance |
17/30332894 DC : 0 | BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
17/30350914 DC : 0 | BS EN 1047-2 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER |
CEI EN 60584-3 : 2009 | THERMOCOUPLES - PART 3: EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEMS |
I.S. EN 60695-2-10:2013 | FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013 (EQV)) |
UNI EN 15659 : 2009 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS |
S.R. CEN TS 15658:2007 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE UNDER NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE HOT END METHOD |
XP CEN/TS 45545-2 : 2009 XP | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
NF EN 1366-9 : 2009 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
I.S. EN 50200:2015 | METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS |
EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
I.S. EN 1047-1:2005 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS |
DIN EN 416-1:2009-09 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
DIN EN 777-1:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
DIN EN 777-3:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
DIN EN 777-2:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
DIN EN 13235:2007-01 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR |
BS EN 993-9:1997 | Methods of test for dense shaped refractory products Determination of creep in compression |
BS EN 12599:2012 | Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
BS EN 61558-1 : 2005 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
BS EN 12789:2002 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength |
BS EN 12952-15:2003 | Water-tube boilers and auxiliary installations Acceptance tests |
BS EN 821-3:2005 | Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties Determination of specific heat capacity |
BS EN 12101-2:2017 | Smoke and heat control systems Natural smoke and heat exhaust ventilators |
BS EN 821-2:1997 | Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties Determination of thermal diffusivity by the laser flash (or heat pulse) method |
BS EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety |
BS EN 15157:2006 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude |
BS EN 15335:2007 | Advanced technical ceramics. Ceramic composites. Determination of elastic properties by resonant beam method up to 2000°C |
BS EN 12291:2003 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of compression properties |
BS EN 1458-1:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW Safety |
BS EN 12244-1:1998 | Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW Safety |
EN 12291:2003 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties |
DIN EN 821-3:2005-04 | Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity |
EN 12669:2000 | Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating |
EN 60269-1:2007/A2:2014 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014) |
EN 1159-1:2003 | Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion |
EN 1159-2:2003 | Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity |
EN 61558-1:2005/A1:2009 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
EN 1047-1:2005 | Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and diskette inserts |
EN 12881-2:2005+A1:2008 | Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
EN 12290:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties |
CEN/TS 1007-7:2006 | Advanced technical ceramics - Ceramic composites. Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
EN 30-1-1:2008+A3:2013 | Domestic cooking appliances burning gas - Part 1-1: Safety - General |
EN 1007-7:2010 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
EN 1007-6:2007 | Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature |
EN 60695-11-4 : 2011 | FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011) |
CEN/TS 15866:2009 | Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres |
EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
I.S. EN 1159-3:2003 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY |
EN 60068-3-6:2002 | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers |
CEN/TS 15658:2007 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method |
EN 12244-1:1998 | Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW - Part 1: Safety |
EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
EN 62460:2008 | Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations |
EN 60584-3:2008 | Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system |
EN 820-5:2009 | Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures |
EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
EN 13235:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour |
EN 12101-2:2017 | Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators |
EN 12789:2002 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength |
EN 50570:2013/A1:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
PREN 416 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
DIN EN 15181:2015-03 (Draft) | MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS |
CEI EN 50571 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES |
09/30181168 DC : DRAFT JAN 2009 | BS EN 1047-2 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER |
I.S. EN 1159-2:2003 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - PART 2: DETERMINATION OF THERMAL DIFFUSIVITY |
I.S. EN 1894:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF SHEAR STRENGTH BY COMPRESSION LOADING OF NOTCHED SPECIMENS |
CEI EN 60695-11-3 : 2013 | FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS |
I.S. EN 1007-6:2007 | ADVANCED TECHNICAL CERAMIC - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENTS AT HIGH TEMPERATURE |
PREN 17175 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
CEI EN 60531 : 2001 | HOUSEHOLD ELECTRIC THERMAL STORAGE ROOM HEATERS METHODS FOR MEASURING PERFORMANCE |
06/30139629 DC : 0 | EN 777-1 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D, SAFETY |
I.S. HD 605:2008 | ELECTRIC CABLES - ADDITIONAL TEST METHODS |
I.S. EN 45545-2:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
BS EN 61804-2:2007 | Function blocks (FB) for process control Specification of FB concept and electronic device description language (EDDL) |
HD 605 S2:2008/corrigendum:2010 | ELECTRIC CABLES - ADDITIONAL TEST METHODS |
02/122341 DC : DRAFT MAY 2002 | PREN 993-19:2002 - METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 19: DETERMINATION OF THERMAL EXPANSION |
I.S. EN 61804-2:2007 | FUNCTION BLOCKS (FB) FOR PROCESS CONTROL - PART 2: SPECIFICATION OF FB CONCEPT |
BS EN 13381-9:2015 | Test methods for determining the contribution to the fire resistance of structural members Applied fire protection systems to steel beams with web openings |
PREN 12599 : DRAFT 2010 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
DD ENV 12923-2:2001 | Advanced technical ceramics. Monolithic ceramics Oxidation test |
XP CEN/TS 15658 : 2007 XP | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE UNDER NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR - HOT END METHOD |
BS EN 60269-1 : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
DIN EN 45545-2:2016-02 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
I.S. EN 61515:2016 | MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES |
UNE-EN 50193-1:2016 | Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements |
I.S. EN 60531:2000 | HOUSEHOLD ELECTRIC THERMAL STORAGE ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE |
CEI EN 61804-2 : 2008 | FUNCTION BLOCKS (FB) FOR PROCESS CONTROL - PART 2: SPECIFICATION OF FB CONCEPT |
I.S. EN 60068-3-7:2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND B (WITH LOAD) |
ISO 20238:2018 | Conveyor belts — Drum friction testing |
I.S. EN 1007-7:2010 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
PREN 30-1-1 : DRAFT 2017 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
I.S. EN 60695-11-2:2017 | FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
CEI EN 50570 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
I.S. EN 60335-2-6:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES |
UNE-EN 50399:2012 | Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results |
UNE-EN 15181:2017 | Measuring method of the energy consumption of gas fired ovens |
ASTM E 2714 : 2013 : REDLINE | Standard Test Method for Creep-Fatigue Testing |
NF EN 820-4 : 2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
UNI EN 1366-9 : 2008 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
S.R. CEN/TS 45545-2:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
DIN EN 1007-6:2008-02 | Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature |
DIN EN 10319-2:2007-01 | Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models |
DIN EN 12788:2005-11 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength |
DIN EN 1020:2010-05 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
DIN EN 1319:2010-06 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
DIN EN 1554:2012-10 | CONVEYOR BELTS - DRUM FRICTION TESTING |
DIN EN 993-19:2004-08 | Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method |
DIN EN 1159-3:2008-06 | Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity (includes Corrigendum AC:2008) |
DIN EN 12881-1:2015-10 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
DIN EN 15758:2010-12 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects |
BS EN 1007-6:2007 | Advanced technical ceramic. Ceramic composites. Methods of test for reinforcements Determination of tensile properties of filaments at high temperature |
BS EN 1554:2012 | Conveyor belts. Drum friction testing |
BS EN 820-3:2004 | Advanced technical ceramics. Monolithic ceramics. Thermomechanical properties Determination of resistance to thermal shock by water quenching |
UNE-EN 1458-1:2012 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety |
BS EN 993-8:1997 | Methods of test for dense shaped refractory products Determination of refractoriness-under-load |
UNE-EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
BS EN 12881-1:2014 | Conveyor belts. Fire simulation flammability testing Propane burner tests |
EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
EN 1366-1:2014 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
I.S. EN 1366-1:2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
I.S. EN 30-1-1:2008 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
I.S. EN 12244-1:1998 | DIRECT GAS-FIRED WASHING MACHINES, OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW - PART 1: SAFETY |
DIN EN 1893:2005-07 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPER TIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF TENSILE PROPERTIES |
DIN EN 12290:2005-09 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF COMPRESSION PROPERTIES |
I.S. EN 12669:2000 | DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING |
DIN EN 1363-1:2012-10 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
I.S. EN 12599:2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
DIN EN 1366-1:2014-12 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
I.S. EN 12881-1:2014 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
I.S. EN 12881-2:2005 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
I.S. EN 1458-1:2011 | DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
DIN EN 1892:2005-07 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF TENSILE PROPERTIES |
DIN EN 12291:2003-10 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF COMPRESSION PROPERTIES |
DIN EN 1894:2005-07 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens; German version EN 1894:2005 |
VDE 0349-2 : 1998 | METHOD OF TEST FOR THE HYDROLYTIC STABILITY - MOULDED THERMOSETS |
VDI 3460 Blatt 1:2014-02 | Emission control - Thermal waste treatment - Fundamentals |
BS 1902-4.5(2000) : 2000 | METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS - DETERMINATION OF MODULUS OF RUPTURE AT ELEVATED TEMPERATURES |
DIN EN 61234-2 : 1998 | ELECTRICAL INSULATING MATERIALS - METHOD OF TEST FOR THE HYDROLYTIC STABILITY - PART 2: MOULDED THERMOSETS |
NF EN 1159-1 : 2003 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - PART 1: DETERMINATION OF THERMAL EXPANSION |
UNI CEI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
CEI EN 50362 : 2003 | METHOD OF TEST FOR RESISTANCE TO FIRE OF LARGER UNPROTECTED POWER AND CONTROL CABLES FOR USE IN EMERGENCY CIRCUITS |
CEI EN 60068-3-5 : 2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
I.S. EN 285:2015 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
BS EN 60695-11-4:2011 | Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method |
I.S. EN 12788:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF FLEXURAL STRENGTH |
10/30216687 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
I.S. EN 12290:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE DETERMINATION OF COMPRESSION PROPERTIES |
DIN EN 1366-9:2008-08 | Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts |
BS EN 16733:2016 | Reaction to fire tests for building products. Determination of a building product\'s propensity to undergo continuous smouldering |
PD CEN/TR 16988:2016 | Estimation of uncertainty in the single burning item test |
CEI EN 60068-3-6 : 2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
I.S. EN 820-2:2003 | ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMO-MECHANICAL PROPERTIES - PART 2: DETERMINATION OF SELF-LOADED DEFORMATION |
14/30287830 DC : 0 | BS EN 16733 - BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCTS PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING |
BS EN 62460:2008 | Temperature. Electromotive force (EMF) tables for pure-element thermocouple combinations |
BS EN 60584-3:2008 | Thermocouples Extension and compensating cables. Tolerances and identification system |
17/30301540 DC : 0 | BS ISO 19629 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - THERMOPHYSICAL PROPERTIES OF CERAMIC COMPOSITES - DETERMINATION OF UNIDIMENSIONAL THERMAL DIFFUSIVITY BY FLASH METHOD |
DIN EN 1007-7:2010-12 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
UNE-EN 16733:2016 | Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering |
DIN EN 16733:2016-07 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT'S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING |
12/30259188 DC : 0 | BS EN 12881-1 - CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
PREN 1047-1 : DRAFT 2017 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS |
BS EN 50193-1:2013 | Electric instantaneous water heaters General requirements |
BS EN 820-5:2009 | Advanced technical ceramics. Thermomechanical properties of monolithic ceramics Determination of elastic moduli at elevated temperatures |
BS EN 50571:2013 | Household and similar electrical appliances. Safety. Particular requirements for commercial electric washing machines |
12/30249755 DC : DRAFT JULY 2012 | BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - GENERAL REQUIREMENTS |
I.S. EN 50571:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES |
15/30325369 DC : 0 | BS EN 484 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE |
17/30350911 DC : 0 | BS EN 1047-1 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS |
10/30235574 DC : 0 | BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
07/30162155 DC : 0 | EN 15659 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS |
UNE-EN 13381-4:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members |
16/30333511 DC : 0 | BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
04/30116565 DC : DRAFT JUL 2004 | EN 12881-1 - CONVEYOR BELTS - FIRE TEST - PART 1: TWO METRE PROPANE GALLERY |
09/30210744 DC : 0 | BS EN 15365 - ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD |
CEI EN 60695-11-2 : 2014 | FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
PREN 50570 : DRAFT 2011 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
NF EN 1007-7 : 2010 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
PREN 1047-2 : DRAFT 2017 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER |
BS EN 50399:2011 | Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results |
I.S. EN 10319-2:2006 | METALLIC MATERIALS - TENSILE STRESS RELAXATION TESTING - PART 2: PROCEDURE FOR BOLTED JOINT MODELS |
UNI EN 1047-2 : 2013 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER |
NF EN 50399 : 2012 AMD 1 2016 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
CEI EN 62460 : 2009 | TEMPERATURE - ELECTROMOTIVE FORCE (EMF) TABLES FOR PURE-ELEMENT THERMOCOUPLE COMBINATIONS |
I.S. EN 16442:2015 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
I.S. CEN TS 15365:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD |
I.S. EN 61189-3:2008 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS) |
I.S. CEN TS 820-5:2004 | ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
BS EN 1892:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of tensile properties |
DIN EN 12881-2:2009-10 | Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test (includes Amendment A1:2009) |
BS EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
UNI EN 1366-1 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
I.S. EN 777-4:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
I.S. EN 777-2:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
I.S. EN 416-1:2009 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
I.S. EN 777-3:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
I.S. EN 1319:2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
EN 60068-3-7:2002 | Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) |
ONORM EN 1047-1 : 2006 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS |
I.S. EN 13823:2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
I.S. EN 621:2009 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
UNI EN 13823 : 2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
I.S. EN 1020:2009 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
I.S. EN 777-1:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
EN 821-2:1997 | Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method |
UNI EN 12599 : 2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
UNI EN 416-1 : 2009 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
UNI EN 12881-1 : 2014 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
UNI EN 1458-1 : 2012 | DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
UNI EN 777-4 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
UNI EN 12881-2 : 2008 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
EN 820-4:2009 | Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures |
UNI EN 1020 : 2009 | NON-DOMESTIC FORCED CONVECTION GAS- FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
EN 13381-6:2012 | Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
UNI EN 1319 : 2010 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN- ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
UNI EN 621 : 2010 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
UNI EN 777-1 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
UNI EN 1554 : 2012 | CONVEYOR BELTS - DRUM FRICTION TESTING |
EN 50362:2003 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
UNI EN 777-2 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
UNI EN 777-3 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
11/30250552 DC : 0 | BS EN 1554 - CONVEYOR BELTS - DRUM FRICTION TESTING |
04/30125773 DC : DRAFT NOV 2004 | EN 12923-1 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - PART 1: GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS |
BS EN 1007-7:2010 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
UNI EN 1159-3 : 2003 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - DETERMINATION OF SPECIFIC HEAT CAPACITY |
PREN 484 : DRAFT 2015 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE |
I.S. CEN TS 1007-7:2006 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES. METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
PREN 15659 : DRAFT 2017 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS |
BS EN 13381-6:2012 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete filled hollow steel columns |
BS EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
PREN 50193-1 : DRAFT 2016 | ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
DD ENV 12923-1:1998 | Advanced technical ceramics. Monolithic ceramics General practice for undertaking corrosion tests |
UNI EN 13381-4 : 2013 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
I.S. EN 13235:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR |
BS EN 1366-9:2008 | Fire resistance tests for service installations Single compartment smoke extraction ducts |
DIN EN 60584-3:2008-08 | Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system (IEC 60584-3:2007); German version EN 60584-3:2008 |
I.S. EN 820-3:2004 | ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 3: DETERMINATION OF RESISTANCE TO THERMAL SHOCK BY WATER QUENCHING |
DIN 43735:2011-06 | PROCESS CONTROL TECHNOLOGY - ELECTRICAL TEMPERATURE SENSORS - REPLACEABLE INSERTS FOR RTDS AND THERMOCOUPLES |
12/30261347 DC : 0 | BS EN 50582 - METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED OPTICAL FIBRE CABLES FOR USE IN EMERGENCY CIRCUITS (DIAMETER LESS THAN OR EQUAL TO 20 MM) |
BS EN 61234-2:1998 | Method of test for hydrolytic stability of electrical insulating materials Moulded thermosets |
I.S. EN 1047-2:2009 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER |
98/201085 DC : DRAFT MARCH 1998 | PREN 50296 - HOUSEHOLD ELECTRIC THERMAL STORAGE ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE |
DKD-R 5-6 : 2008 | |
PREN 419 : DRAFT 2017 | GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NONDOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
PREN 50200 : DRAFT 2013 | METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS |
UNI EN 1007-7 : 2010 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
BS EN 50200:2015 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
DIN EN 13381-4:2013-08 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
I.S. EN 60695-11-4:2011 | FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011) |
BS EN 13381-4:2013 | Test methods for determining the contribution to the fire resistance of structural members Applied passive protection products to steel members |
UNI CEI CEN/TS 45545-2 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
03/308231 DC : 0 | EN 50399-1 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 1: APPARATUS |
I.S. EN 1366-9:2008 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
DIN EN 820-4:2013-01 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
UNI EN 1007-6 : 2008 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENTS AT HIGH TEMPERATURE |
DD ENV 13235:2000 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour |
DD ENV 820-4:2002 | Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties Determination of flexural creep deformation at elevated temperatures |
S.R. CEN TS 15866:2009 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE THERMAL DIFFUSIVITY OF CERAMIC FIBRES |
DIN EN 16442:2015-05 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
UNE-EN 60695-11-4:2012 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
DD CEN/TS 45545-2:2009 | Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components |
I.S. EN 60068-3-6:2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
I.S. EN 60068-3-5:2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
I.S. EN 60584-3:2008 | THERMOCOUPLES - PART 3: EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEM |
I.S. EN 15659:2009 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS |
UNE-EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
UNE-EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
I.S. EN 50362:2003 | METHOD OF TEST FOR RESISTANCE TO FIRE OF LARGER UNPROTECTED POWER AND CONTROL CABLES FOR USE IN EMERGENCY CIRCUITS |
I.S. EN 60695-11-3:2012 | FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS (IEC 60695-11-3:2012 (EQV)) |
17/30363959 DC : 0 | BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
BS EN 1047-2 : 2009 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER |
ECA 10-08 : OCT 2011 | CALIBRATION OF THERMOCOUPLES |
EN 1047-2:2009+A1:2013 | Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container |
ISO/TR 15658:2009 | Fire resistance tests Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation |
DIN EN 1047-2:2013-05 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER |
I.S. EN 62460:2008 | TEMPERATURE - ELECTROMOTIVE FORCE (EMF) TABLES FOR PURE-ELEMENT THERMOCOUPLE COMBINATIONS |
DIN EN 13823:2015-02 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
BS EN 13823:2010+A1:2014 | Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item |
DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
DIN EN 1047-1:2006-01 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS |
UNE-EN 1554:2012 | Conveyor belts - Drum friction testing |
BS EN 13235:2006 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour |
BS EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
BS EN 12669:2000 | Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating |
BS EN 12788:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength |
BS EN 1893:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of tensile properties |
BS EN 993-19:2004 | Methods of test for dense shaped refractory products Determination of thermal expansion by a differential method |
BS EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System E. Safety |
BS EN 1366-1:2014 | Fire resistance tests for service installations Ventilation ducts |
BS EN 1159-3:2003 | Advanced technical ceramics. Ceramic composites, thermophysical properties Determination of specific heat capacity |
UNI EN 1363-1 : 2012 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
BS EN 820-2:2003 | Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties Determination of self-loaded deformation |
BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
UNE-EN 1366-1:2016 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
BS EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety |
BS EN 12923-1:2006 | Advanced technical ceramics. Monolithic ceramics General practice for undertaking corrosion tests |
BS EN 1363-1:2012 | Fire resistance tests General requirements |
BS EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety |
UNE-EN 1020:2010 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
BS EN 285:2015 | Sterilization. Steam sterilizers. Large sterilizers |
BS EN 10319-2:2006 | Metallic materials. Tensile stress relaxation testing Procedure for bolted joint models |
UNE-EN 12101-2:2004 | Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators |
UNE-EN 15659:2010 | Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units |
UNE-EN 30-1-1:2009 | Domestic cooking appliances burning gas - Part 1-1: Safety - General |
UNE-EN 50571:2014 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines |
EN 15181:2017 | Measuring method of the energy consumption of gas fired ovens |
DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
BS EN 15758:2010 | Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
UNE-EN 15758:2011 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
UNE-EN 50570:2014 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers |
BS EN 15158:2006 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of fatigue properties at constant amplitude |
DIN EN 1159-1:2007-11 | Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion (includes Corrigendum AC:2007) |
DIN EN 1159-2:2003-12 | Advanced technical ceramics - Ceramic composites; Thermophysical properties - Part 2: Determination of thermal diffusivity |
EN 61515:2016 | Mineral insulated metal-sheathed thermocouple cables and thermocouples |
EN 1893:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties |
EN 1458-1:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety |
ENV 12788 : 1998 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF FLEXURAL STRENGTH |
EN 820-2:2003 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation |
ENV 12789 : 1998 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER AIR AT ATMOSPHERE PRESSURE - DETERMINATION OF FLEXURAL STRENGTH |
EN 15335:2007 | Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 °C |
EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety |
EN 15158:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude |
OVE/ONORM EN 60584-3 : 2008 | THERMOCOUPLES - PART 3: EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEM |
EN 993-19:2004 | Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method |
EN 1554:2012 | Conveyor belts - Drum friction testing |
EN 993-7:1998 | Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures |
EN 993-8 : 1997 | METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS - PART 8: DETERMINATION OF REFRACTORINESS-UNDER-LOAD |
EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety |
EN 1366-9:2008 | Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts |
EN 15659:2009 | Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units |
EN 15157:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude |
EN 1892:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties |
EN 15758:2010 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety |
ENV 12923-1 : 1997 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS |
EN 1894:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens |
EN 993-9:1997 | Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression |
EN 16733:2016 | Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering |
EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety |
EN 821-3:2005 | Advanced technical ceramics - Monolithic ceramics. Thermo-physical properties - Part 3: Determination of specific heat capacity |
EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety |
ENV 13235 : 1998 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR |
EN 820-3:2004 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching |
EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
DIN EN 50446:2007-04 | STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
13/30282376 DC : 0 | BS EN 50200 - METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS |
I.S. EN 993-8:1998 | METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS - PART 8: DETERMINATION OF REFRACTORINESS-UNDER-LOAD |
I.S. EN 12789:2002 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FLEXURAL STRENGTH |
BS EN 60695-11-2:2017 | Fire hazard testing Test flames. 1 kW pre-mixed flame. Apparatus, confirmatory test arrangement and guidance |
I.S. EN 821-3:2005 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMO-PHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY |
I.S. EN 12923-1:2006 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - PART 1: GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS |
UNE-EN 60695-11-3:2013 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
I.S. EN 1893:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF TENSILE PROPERTIES |
08/30185906 DC : 0 | BS EN 820-4 - ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
DD CEN/TS 15658:2007 | Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature under non-reactive environment. Determination of creep behaviour by the hot end method |
I.S. EN 1554:2012 | CONVEYOR BELTS - DRUM FRICTION TESTING |
BS EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for interconnection structures (printed boards) |
09/30210248 DC : 0 | BS EN 1007-7 - ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
DD ENV 12788:1998 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength |
DIN EN 820-5:2009-10 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
UNE-EN 13381-6:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
16/30304294 DC : 0 | BS EN 16989 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - FIRE BEHAVIOUR TEST FOR A COMPLETE SEAT |
BS EN 15181:2017 | Measuring method of the energy consumption of gas fired ovens |
04/30123974 DC : DRAFT OCT 2004 | EN 50446 - STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
BS EN 60695-2-10:2013 | Fire hazard testing Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure |
BS EN 60335-2-6:2015 | Household and similar electrical appliances. Safety Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
EN 50193-1:2016 | Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements |
02/123950 DC : DRAFT OCT 2002 | BS EN 14470-1 - FIRE SAFETY STORAGE CABINETS - PART 1: SAFETY STORAGE CABINETS FOR FLAMMABLE LIQUIDS |
EN 60335-2-6:2015 | Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
CEI EN 50446 : 2007 | STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
I.S. EN 820-4:2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
06/30139641 DC : 0 | EN 777-3 - MULTI-BURNER GAS-FORED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
BS EN 15659:2009 | Secure storage units. Classification and methods of test for resistance to fire. Light fire storage units |
08/30185915 DC : 0 | BS EN 820-5 - ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
UNE-EN 45545-2:2013 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components |
DIN EN 15659:2009-12 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS |
UNI EN 15758 : 2010 | CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
UNI EN 13381-6 : 2012 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS |
I.S. EN 60269-1:2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
I.S. ENV 1007-6:2002 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENT AT HIGH TEMPERATURE |
I.S. EN 820-5:2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
I.S. EN 50193-1:2016 | ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
I.S. EN 13381-4:2013 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
I.S. EN 13381-9:2015 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
I.S. EN 16733:2016 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT'S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING |
I.S. EN 50446:2006 | STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
BS EN 50362:2003 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
17/30350908 DC : 0 | BS EN 15659 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS |
UNI CEN/TS 15866 : 2009 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE THERMAL DIFFUSIVITY OF CERAMIC FIBRES |
UNE-EN 13381-9:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings |
I.S. EN 15181:2017 | MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS |
BS EN 13823 : 2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
EN 1363-1:2012 | Fire resistance tests - Part 1: General Requirements |
DIN EN 777-4:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
EN 50571:2013/A1:2018 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines |
DIN EN 12923-1:2007-03 | Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests |
DIN EN 30-1-1:2013-06 | Domestic cooking appliances burning gas - Part 1-1: Safety - General (includes Amendment 1:2013) |
I.S. EN 1363-1:2012 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
BS EN 1047-1:2005 | Secure storage units. Classification and methods of test for resistance to fire Data cabinets and diskette inserts |
BS EN 993-7:2000 | Methods of test for dense shaped refractory products Determination of modulus of rupture at elevated temperatures |
BS EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
BS EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety |
BS EN 30-1-1 : 2008 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
BS EN 12290:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of compression properties |
BS EN 12881-2 : 2005 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
BS EN 1159-1:2003 | Advanced technical ceramics. Ceramic composites. Thermophysical properties Determination of thermal expansion |
BS EN 1159-2:2003 | Advanced technical ceramics. Ceramic composites. Thermophysical properties Determination of thermal diffusivity |
BS EN 1894:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression loading of notched specimens |
DIN EN 15335:2007-08 | Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000 ?C |
EN 12788:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength |
EN 50446:2006 | Straight thermocouple assembly with metal or ceramic protection tube and accessories |
EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
DIN EN 621:2010-04 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
EN 61804-2:2007 | Function blocks (FB) for process control - Part 2: Specification of FB concept |
EN 60695-11-3:2012 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
DIN EN 820-3:2004-11 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching |
EN 60068-3-5:2002 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
DIN EN 15181:2009-09 | MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS |
CEN/TS 15365:2006 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method |
CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
EN 10319-2:2006 | Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models |
DIN EN 1458-1:2012-02 | DOMESTIC DIRECT GAS-FIRED TUBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
EN 12923-1:2006 | Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests |
EN 50399 : 2011 AMD 1 2016 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
EN 60531:2000 | Household electric thermal storage room heaters - Methods for measuring performance |
EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
EN 13381-4:2013 | Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members |
UNI EN 30-1-1 : 2013 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
EN 13381-9:2015 | Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings |
CEN/TS 820-5:2004 | Advanced technical ceramics - Methods of testing monolithic ceramics. Thermomechanical properties - Part 5: Determination of elastic moduli at elevated temperatures |
EN 60695-11-2:2017 | Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance |
EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
DIN EN 820-2:2003-07 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 2: DETERMINATION OF SELF-LOADED DEFORMATION |
EN 50200:2015 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
UNE-EN 13823:2012 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
ENV 12923-2:2001 | Advanced technical ceramics - Monolithic ceramics - Part 2: Oxidation test |
UNE-EN 60335-2-6:2015 | Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
BS 88-1(2007) : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
IEC 60584-3:2007 | Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system |
IEC 61515:2016 | Mineral insulated metal-sheathed thermocouple cables and thermocouples |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.