EN 60862-1:2015
Current
Current
The latest, up-to-date edition.
Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
Published date
06-11-2015
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Terms, definitions, units and symbols
4 Order of precedence of documents
5 Preferred values for ratings and characteristics
6 Marking
7 Quality assessment procedures
8 Test and measurement procedures
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC 60862-1:2015 specifies the methods of test and general requirements for SAW filters of assessed quality using either capability approval or qualification approval procedures. This edition includes the following significant technical changes with respect to the previous edition:- the terms and definitions from IEC 60862-2:2002 are included;- the measurement method for the balanced type filter is described;- the electrostatic discharge (ESD) sensitivity test procedure is considered.
| Committee |
CLC/SR 49
|
| DevelopmentNote |
Supersedes EN 166000. (10/2003)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 60862-1:2005 | Identical |
| SN EN 60862-1 : 2003 | Identical |
| IEC 60862-1:2015 | Identical |
| NBN EN 60862-1 : 2015 | Identical |
| NF EN 60862-1 : 2015 | Identical |
| DIN EN 60862-1:2016-04 | Identical |
| PN EN 60862-1 : 2015 | Identical |
| NEN EN IEC 60862-1 : 2015 | Identical |
| CEI EN 60862-1 : 2016 | Identical |
| I.S. EN 60862-1:2015 | Identical |
| BS EN 60862-1:2015 | Identical |
| UNE-EN 60862-1:2015 | Identical |
| PNE-FprEN 60862-1 | Identical |
| BS EN 62575-1:2016 | Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Generic specification |
| CEI EN 62604-2 : 2012 | SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 2: GUIDELINES FOR THE USE |
| EN IEC 62604-2:2018 | Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 2: Guidelines for the use |
| EN 61837-2:2011/A1:2014 | SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 2: CERAMIC ENCLOSURES (IEC 61837-2:2011/A1:2014) |
| EN 61837-3:2015 | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3: Metal enclosures |
| EN 62604-1:2015 | Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification |
| BS EN 62047-7:2011 | Semiconductor devices. Micro-electromechanical devices MEMS BAW filter and duplexer for radio frequency control and selection |
| I.S. EN 62604-2:2012 | SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 2: GUIDELINES FOR THE USE (IEC 62604-2:2011 (EQV)) |
| BS EN 62604-1:2015 | Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Generic specification |
| I.S. EN IEC 62604-2:2018 | SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 2: GUIDELINES FOR THE USE |
| BS EN 61837-3:2015 | Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections Metal enclosures |
| BS EN 62604-2:2012 | Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers of assessed quality Guidelines for the use |
| BS EN 61837-2 : 2011 | SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 2: CERAMIC ENCLOSURES |
| EN 62047-7 : 2011 | SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 7: MEMS BAW FILTER AND DUPLEXER FOR RADIO FREQUENCY CONTROL AND SELECTION |
| EN 62575-1:2016 | Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification |
| IEC 60749-28:2017 | Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - device level |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| EN 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60068-2-13:1983 | Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 60068-2-64:2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| EN 60068-2-7:1993 | Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| EN 61340-3-2:2007 | Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms |
| EN 60068-2-17:1994 | Environmental testing - Part 2: Tests - Test Q: Sealing |
| IEC 60068-2-17:1994 | Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
| IEC 60068-2-10:2005 | Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth |
| IEC 60862-2:2012 | Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidelines for the use |
| EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| EN 61340-3-1:2007 | Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
| IEC 61340-3-1:2006 | Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
| IEC 60862-3:2003 | Surface acoustic wave (SAW) filters of assessed quality - Part 3: Standard outlines |
| IEC 61340-3-2:2006 | Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms |
| EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
| EN 60068-2-13:1999 | Environmental testing - Part 2: Tests - Test M: Low air pressure |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60050-561:2014 | International Electrotechnical Vocabulary (IEV) - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection |
| IEC 60122-1:2002 | Quartz crystal units of assessed quality - Part 1: Generic specification |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
| EN 60695-11-5:2017 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 60068-2-45:1992/A1:1993 | Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| EN 60068-2-31:2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.