IEC 61260:1995
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electroacoustics - Octave-band and fractional-octave-band filters
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
23-03-2016
IEC 61260-1:2014
IEC 61260-2:2016+AMD1:2017 CSV
IEC 61260-3:2016
08-08-1995
FOREWORD
1 Scope
2 Normative references
3 Definitions
4 Performance requirements
5 Test methods
6 Instrument making
7 Instruction manual
Tables
1 Limits on relative attenuation for octave-band filters
A.1 Midband frequencies for octave-band and one-third-
band filters in the audio range
B.1 Limits on relative attenuation for one-third-
octave-band filters
Annexes
A Midband frequencies
B Normalized frequencies at breakpoints of limits on minimum
and maximum relative attenuation for one-third-octave-band
filters
C Recommendations for verification of the electrical
performance characteristics of bandpass filters
Provides performance requirements and methods for testing the performance of analogue, sampled-data, and digital implementations of bandpass filters that comprise a filter set or spectrum analyzer.This publication supersedes IEC 60225.
DevelopmentNote |
BS draft 98/231051 DC refers to amendment. Supersedes IEC 60225 (03/2001) Also numbered as BS EN 61260. (09/2002) Stability Date: 2014. (10/2012) Fully replaced/withdrawn upon publication of IEC 61260-2 and IEC 61260-3. (02/2014)
|
DocumentType |
Standard
|
Pages |
74
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NF EN 61260 : 96 AMD 1 2002 | Identical |
NEN EN IEC 61260 : 1995 AMD 1 2002 | Identical |
NEN 11260 : 1995 | Identical |
I.S. EN 61260:1999 | Identical |
PN EN 61260 : 2000 AMD 1 2004 | Identical |
AS/NZS 4476:1997 | Identical |
SN EN 61260 : 1995 AMD 1 2001 | Identical |
EN 61260:1995 | Identical |
BIS IS 6964 : 2001(R2004) | Identical |
EN 61260:1995/A1:2001 | Identical |
DIN EN 61260:2003-03 | Identical |
JIS C 1514:2002 | Identical |
UNE-EN 15461:2008 | Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements |
CEI EN 60349-4 : 2014 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER |
BS EN 60349-1:2010 | Electric traction. Rotating electrical machines for rail and road vehicles Machines other than electronic converter-fed alternating current motors |
04/30065335 DC : DRAFT JAN 2004 | BS ISO 16832 - ACOUSTICS - LOUDNESS SCALING BY MEANS OF CATEGORIES |
00/561015 DC : DRAFT FEB 2000 | BS EN ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OFNOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOICAND HEMI-ANECHOIC ROOMS |
05/30134086 DC : DRAFT MAY 2005 | IEC 61996-2 ED1 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
I.S. EN ISO 3382:2000 | ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS |
BS EN 1793-6:2012 | Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions |
I.S. EN ISO 4869-3:2007 | ACOUSTICS - HEARING PROTECTORS - PART 3: MEASUREMENT OF INSERTION LOSS OF EAR-MUFF TYPE PROTECTORS USING AN ACOUSTIC TEST FIXTURE |
ISO 9611:1996 | Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted |
BS EN 60118-15:2012 | Electroacoustics. Hearing aids Methods for characterising signal processing in hearing aids with a speech-like signal |
DIN EN ISO 3382-3:2012-05 | Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2012) |
01/565186 DC : DRAFT DEC 2001 | ISO 11904-2 - ACOUSTICS - DETERMINATION OF SOUND EMISSIONS FROM SOUND SOURCES PLACED CLOSE TO THE EAR - PART 2: TECHNIQUE USING A MANIKIN (MANIKIN-TECHNIQUE) |
12/30258455 DC : 0 | FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
17/30362053 DC : DRAFT SEP 2017 | BS EN ISO 16283-2 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION |
I.S. EN ISO 3382-3:2012 | ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES (ISO 3382-3:2012) |
BS ISO 6969:2004 | Road vehicles. Sound signalling devices. Tests after mounting on vehicle |
04/30118161 DC : DRAFT AUG 2004 | ISO 22472 - SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR THE INSTALLATION AND OPERATION OF VOYAGE DATA RECORDER (VDR) |
12/30219256 DC : 0 | BS ISO 15619 - RECIPROCATING INTERNAL COMBUSTION ENGINES - MEASUREMENT METHOD FOR EXHAUST SILENCERS - SOUND POWER LEVEL OF EXHAUST NOISE AND INSERTION LOSS USING SOUND PRESSURE AND POWER LOSS RATIO |
BS ISO 20233-1:2018 | Ships and marine technology. Model test method for propeller cavitation noise evaluation in ship design Source level estimation |
DIN EN ISO 16283-3:2016-09 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FAADE SOUND INSULATION (ISO 16283-3:2016) |
NF ISO 21289 : 2008 | MECHANICAL VIBRATION AND SHOCK - PARAMETERS TO BE SPECIFIED FOR THE ACQUISITION OF VIBRATION DATA |
ANSI S12.62 : 2012 | ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
BS EN 61265:1995 | Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aircraft |
05/30129922 DC : DRAFT FEB 2005 | EN 15036-2 - HEATING BOILERS - TEST REGULATIONS FOR THE AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 2: FLUE GAS NOISE EMISSIONS AT THE OUTLET OF THE HEAT GENERATOR |
07/30162190 DC : 0 | BS EN 61996-2 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
DIN EN ISO 13473-5:2010-04 | Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009) |
DIN EN 1793-4:2015-05 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION |
EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
BS EN 61996-1:2013 | Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR) Performance requirements, methods of testing and required test results |
UNE-EN ISO 7779:2011 | Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2010) |
BS ISO 13474:2009 | Acoustics. Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment |
DIN ISO 13472-2:2010-12 | Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces (ISO 13472-2:2010) |
EN 61243-1:2005/A1:2010 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
12/30264220 DC : 0 | BS EN 60118-4 ED.3 - ELECTROACOUSTICS - HEARING AIDS - PART 4: INDUCTION LOOP SYSTEMS FOR HEARING AID PURPOSES - SYSTEM PERFORMANCE REQUIREMENTS |
ISO 20233-1:2018 | Ships and marine technology — Model test method for propeller cavitation noise evaluation in ship design — Part 1: Source level estimation |
BS PAS 41(2003) : 2003 | DIRECTIONAL SOUNDERS - REQUIREMENTS AND TESTS |
09/30206924 DC : 0 | BS EN 60118-15 ED.1 - ELECTROACOUSTICS - PART 15: HEARING AIDS - METHODS FOR CHARACTERISING SIGNAL PROCESSING IN HEARING AIDS |
UNI ISO 1996-2 : 2010 | ACOUSTICS - DESCRIPTION, MEASUREMENT AND ASSESSMENT OF ENVIRONMENTAL NOISE - PART 2: DETERMINATION OF ENVIRONMENTAL NOISE LEVELS |
10/30218973 DC : DRAFT JUNE 2010 | BS EN 1793-6 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
BS ISO 13475-1:1999 | Acoustics. Stationary audible warning devices used outdoors Field measurements for determination of sound emission quantities |
NF EN ISO 13473-5 : 2010 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
PREN ISO 11200 : DRAFT 2012 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012) |
06/30114829 DC : DRAFT AUG 2006 | ISO 13473-5 - CHARACTERISTICS OF PAVEMENT TEXTURE BY USING SURFACE PROFILES - PART 5: MEASUREMENT OF MEGATEXTURE |
BS 7853:1996 | Mechanical vibration. Road surface profiles. Reporting of measured data |
ISO/PAS 17208-1:2012 | Acoustics Quantities and procedures for description and measurement of underwater sound from ships Part 1: General requirements for measurements in deep water |
DD ISO/TS 13473-4:2008 | Characterization of pavement texture by use of surface profiles Spectral analysis of texture profiles |
08/30184169 DC : DRAFT JUNE 2008 | BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
UNE-EN ISO 3382-1:2010 | Acoustics - Measurement of room acoustic parameters - Part 1: Performance spaces (ISO 3382-1:2009) |
ISO 21289:2008 | Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data |
ANSI S3.18 PT1 : 2002 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
CSA C61400-11 : 2007 : R2012 | WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
I.S. EN 61265:1998 | ELECTROACOUSTICS - INSTRUMENTS FOR MEASUREMENT OF AIRCRAFT NOISE - PERFORMANCE REQUIREMENTS FOR SYSTEMS TO MEASURE ONE-THIRD-OCTAVE BAND SOUND PRESSURE LEVELS IN NOISE CERTIFICATION OF TRANSPORT-CATEGORY AEROPLANES |
ANSI S1.42 : 2001 : R2006 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
ANSI S1.17-1 : 2014 | MICROPHONE WINDSCREENS - PART 1: TEST PROCEDURES FOR MEASUREMENTS OF INSERTION LOSS IN STILL AIR |
I.S. EN ISO 3095:2013 | ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES (ISO 3095:2013) |
BS EN ISO 16283-1 : 2014 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION |
I.S. EN 61481-1:2014 | LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
UNI EN ISO 7779 : 2010 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
ISO 2969:2015 | Cinematography — B-chain electro-acoustic reponse of motion-picture control rooms and indoor theatres — Specifications and measurements |
I.S. EN ISO 3382-1:2009 | ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 1: PERFORMANCE SPACES |
ANSI S2.72 PT1 : 2002 : INC : AMD 1 : 2010 : R200700 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
SAE J2834_201910 | Ride Index Structure and Development Methodology |
I.S. EN 15461:2008 | RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS |
I.S. EN ISO 10140-5:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010) |
ISO 8579-1:2002 | Acceptance code for gear units — Part 1: Test code for airborne sound |
EN 61400-11:2013 | Wind turbines - Part 11: Acoustic noise measurement techniques |
DIN EN ISO 10052:2010-10 | Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2004 + Amd 1:2010) (includes Amendment A1:2010) |
DIN EN ISO 11200:2014-10 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014) |
BS EN ISO 3741:2009 | Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for reverberation rooms |
BS EN ISO 8041:2005 | Human response to vibration. Measuring instrumentation |
BS EN ISO 8253-3:2012 | Acoustics. Audiometric test methods Speech audiometry |
UNE-EN ISO 11200:2014 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
UNE-ISO 2631-2:2011 | Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 2: Vibration in buildings (1 Hz to 80 Hz) |
BS EN 13141-2:2010 | Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust and supply air terminal devices |
BS EN ISO 11691:1997 | Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method |
BS EN ISO 15006:2011 | Road vehicles. Ergonomic aspects of transport information and control systems. Specifications for in-vehicle auditory presentation |
ISO 11904-2:2004 | Acoustics Determination of sound immission from sound sources placed close to the ear Part 2: Technique using a manikin |
BS EN ISO 3382:2000 | Acoustics. Measurement of the reverberation time of rooms with reference to other acoustical parameters |
ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
BS EN ISO 140-18:2006 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurement of sound generated by rainfall on building elements |
BS EN ISO 11957:2009 | Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements |
BS EN ISO 7731:2008 | Ergonomics. Danger signals for public and work areas. Auditory danger signals |
BS EN ISO 8253-1:2010 | Acoustics. Audiometric test methods Pure-tone air and bone conduction audiometry |
BS EN ISO 11201:2010 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
BS EN ISO 11904-1:2002 | Acoustics. Determination of sound immission from sound sources placed close to the ear. Technique using a microphone in a real ear (MIRE technique) |
BS EN ISO 4869-3:2007 | Acoustics. Hearing protectors Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture |
BS EN ISO 3745 : 2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS |
I.S. EN ISO 11691:2009 | ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD |
I.S. EN ISO 4871:2009 | ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
DIN EN 15433-4:2008-02 | Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation |
DIN EN ISO 11957:2010-01 | Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
DIN EN ISO 354:2003-12 | ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM |
EN 61265:1995 | Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes |
EN 61243-3:2014/AC:2015 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
I.S. EN ISO 11904-2:2004 | ACOUSTICS - DETERMINATION OF SOUND IMMISSION FROM SOUND SOURCES PLACED CLOSE TO THE EAR - PART 2: TECHNIQUE USING A MANIKIN |
NF EN ISO 11691 : 2009 | ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD |
EN 62585 : 2012 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012) |
DIN EN ISO 8041:2006-06 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
EN 60704-1:2010/A11:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010) |
DIN EN ISO 11691:2010-01 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:2009 |
DIN ISO 230-5:2006-03 | Test code for machine tools - Part 5: Determination of the noise emission (ISO 230-5:2000) |
DIN EN ISO 140-18:2007-02 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 18: LABORATORY MEASUREMENT OF SOUND GENERATED BY RAINFALL ON BUILDING ELEMENTS |
EN 13141-2:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
EN ISO 11904-2:2004 | Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2004) |
EN 61996-2:2008 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results |
NF EN ISO 11904-2 : 2005 | ACOUSTICS - DETERMINATION OF SOUND IMMISSIONS FROM SOUND SOURCES PLACED CLOSE TO THE EAR - PART 2: TECHNIQUE USING A MANIKIN (MANIKIN-TECHNIQUE) |
DIN EN ISO 4871:2009-11 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
EN 50332-2:2013 | Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design |
EN 300 176-2 : 2.2.1 | DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); TEST SPECIFICATION; PART 2: AUDIO AND SPEECH |
EN 61481-1:2014 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
EN 60315-4:1998 | Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions |
EN 12215:2004+A1:2009 | Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
EN 60118-15:2012 | Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal |
BS EN ISO 7235:2009 | Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss |
EN ISO 16251-1:2014 | Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014) |
BS EN ISO 354:2003 | Acoustics. Measurement of sound absorption in a reverberation room |
I.S. EN ISO 11819-1:2002 | ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 1: STATISTICAL PASS-BY METHOD |
EN ISO 16283-2:2015 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2015) |
10/30197204 DC : 0 | BS ISO 26101 - ACOUSTICS - TEST METHODS FOR THE QUALIFICATION OF FREE-FIELD ENVIRONMENTS |
TS 103 334 : 1.1.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR WEARABLE WIRELESS TERMINALS FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER |
CEI EN 61996-1 : 2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: VOYAGE DATA RECORDER (VDR) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
14/30298593 DC : 0 | BS EN 1793-4 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION |
ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
13/30279964 DC : 0 | BS EN ISO 3743-2:1994/AMD 1 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
ANSI S12.57 : 2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
99/710387 DC : DRAFT JUN 99 | EN ISO 15744 - HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2) |
I.S. EN ISO 7779:2010 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
I.S. EN 61996-1:2013-2015-10 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 61996-1:2013 (EQV)) |
11/30229157 DC : 0 | BS ISO 17497-2 - ACOUSTICS - SOUND-SCATTERING PROPERTIES OF SURFACES - PART 2: MEASUREMENT OF THE DIRECTIONAL DIFFUSION COEFFICIENT IN A FREE FIELD |
UNE-EN 16272-4:2017 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field |
13/30269186 DC : 0 | BS EN ISO 16283-2 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION |
BS ISO 13473-2:2002 | Characterization of pavement texture by use of surface profiles Terminology and basic requirements related to pavement texture profile analysis |
I.S. EN ISO 16251-1:2014 | ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014) |
07/30081117 DC : 0 | BS EN ISO 3382-1 - ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 1: PERFORMANCE ROOMS |
04/301307 DC : DRAFT JAN 2004 | IEC 60118-4 ED.2 - HEARING AIDS - PART 4: INDUCTION LOOP SYSTEMS FOR HEARING AID PURPOSES - MAGNETIC FIELD STRENGTH |
BS ISO 9611:1996 | Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted |
03/108242 DC : DRAFT JUNE 2003 | BS ISO 1996 - ACOUSTICS - DESCRIPTION, ASSESSMENT AND MEASUREMENT OF ENVIRONMENTAL NOISE - PART 2: DETERMINATION OF ENVIRONMENTAL NOISE LEVELS |
13/30267625 DC : 0 | BS EN 61481-2 ED 1.0 - LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C |
I.S. EN ISO 140-11:2005 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS |
BS ISO 10302-2:2011 | Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Structure-borne vibration measurements |
08/30177421 DC : DRAFT AUG 2008 | BS ISO 10302-2 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS |
10/30213857 DC : 0 | BS ISO 8253-3 - ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY |
BS EN 60349-4:2013 | Electric traction. Rotating electrical machines for rail and road vehicles Permanent magnet synchronous electrical machines connected to an electronic converter |
11/30216799 DC : 0 | BS ISO 532-1 - ACOUSTICS - METHOD FOR CALCULATING LOUDNESS - PART 1: STATIONARY SOUNDS |
CEI EN 61043 : 1998 | ELECTROACOUSTICS - INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY - MEASUREMENTS WITH PAIRS OF PRESSURE SENSING MICROPHONES |
DIN EN ISO 11201:2010-10 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
BS EN 61996:2001 | Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Performance requirements. Methods of testing and required test results |
13/30281665 DC : 0 | BS EN 50332-2 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY |
BS ISO 11819-1 : 97 AMD 13621 | ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 1 - STATISTICAL PASS-BY METHOD |
I.S. EN 60118-15:2012 | ELECTROACOUSTICS - HEARING AIDS - PART 15: METHODS FOR CHARACTERISING SIGNAL PROCESSING IN HEARING AIDS WITH A SPEECH-LIKE SIGNAL (IEC 60118-15:2012 (EQV)) |
PD ISO/TS 19425:2015 | Reciprocating internal combustion engines. Measurement method for air cleaners. Sound power level of combustion air inlet noise and insertion loss using sound pressure |
S.R. CEN/TS 16272-5:2014 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS |
DIN ISO 2954:2012-10 | Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012) |
UNE-EN ISO 16283-3:2016 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO 16283-3:2016) |
BS ISO 2631-1:1997 | Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration General Requirements |
BS EN 61481-2:2014 | Live working. Phase comparators Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
08/30175518 DC : DRAFT SEP 2008 | BS EN 13141-2 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
BS 848-2.5(2003) : 2003 | ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
15/30297373 DC : 0 | BS EN ISO 4869-1 - ACOUSTICS - HEARING PROTECTORS - PART 1: SUBJECTIVE METHOD FOR THE ASUREMENT OF SOUND ATTENUATION |
BS ISO 13472-2:2010 | Acoustics. Measurement of sound absorption properties of road surfaces in situ Spot method for reflective surfaces |
DIN ISO 13472-1:2004-04 | Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method (ISO 13472-1:2002) |
BS EN ISO 16251-1:2014 | Acoustics. Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Heavyweight compact floor |
07/30135701 DC : 0 | BS IEC 61996-1 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
BS ISO 17497-1 : 2004 | ACOUSTICS - SOUND-SCATTERING PROPERTIES OF SURFACES - PART 1: MEASUREMENT OF THE RANDOM-INCIDENCE SCATTERING COEFFICIENT IN A REVERBERATION ROOM |
BS EN 60315-4:1998 | Methods of measurement on radio receivers for various classes of emission Receivers for frequency-modulated sound broadcasting emissions |
PD CEN/TS 16272-7:2015 | Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Extrinsic characteristics. In situ values of insertion loss |
07/30094858 DC : 0 | BS ISO 3747 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
BS EN ISO 3382-1:2009 | Acoustics. Measurement of room acoustic parameters Performance spaces |
CEI EN 60268-16 : 2012 | SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX |
BS EN 61606-3:2008 | Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristics Professional use |
I.S. EN 16272-4:2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD |
BS ISO 230-5:2000 | Test code for machine tools Determination of the noise emission |
ANSI S12.53/1 : 2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
17/30359986 DC : 0 | BS EN ISO 7779 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
ANSI S12.10:2002(R2007) | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
BS EN ISO 10140-3 : 2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION |
CSA C61400-11 : 2007 | WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
IEC 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
NF EN ISO 24501 : 2011 | ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF AUDITORY SIGNALS FOR CONSUMER PRODUCTS |
BS EN 61243-3:2014 | Live working. Voltage detectors Two-pole low-voltage type |
AASHTO TP 76 : 2015 | METHOD OF TEST FOR MEASUREMENT OF TIRE/PAVEMENT NOISE USING THE ON-BOARD SOUND INTENSITY (OBSI) METHOD |
IEC 61243-1:2003+AMD1:2009 CSV | Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
UNE-EN 62520:2012 | Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters |
I.S. EN 62585:2012 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012 (EQV)) |
ANSI S2.72 PT4 : 2003 : R2007 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 4: GUIDELINES FOR THE EVALUATION OF THE EFFECTS OF VIBRATION AND ROTATIONAL MOTION ON PASSENGER AND CREW COMFORT IN FIXED-GUIDEWAY TRANSPORT SYSTEMS |
CSA ISO 10819 : 2016 | MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND |
S.R. CEN TR 15068:2009 | GAS WELDING EQUIPMENT - MEASUREMENT OF NOISE EMITTED BY BLOWPIPE FOR WELDING, CUTTING, HEATING, BRAZING AND SOLDERING - MEASUREMENT METHOD |
ANSI/ASA S12.54/ISO 3744 : 2011(R2016) | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
BS EN 15461 : 2008 | RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS |
I.S. EN 1793-4:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION |
BS ISO 2631-4 : 2001 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 4: GUIDELINES FOR THE EVALUATION OF THE EFFECTS OF VIBRATION AND ROTATIONAL MOTION ON PASSENGERS AND CREW COMFORT IN FIXED-GUIDEWAY TRANSPORT SYSTEMS |
I.S. EN 1793-6:2012 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
BS EN 60268-5 : 2003 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
I.S. EN ISO 13473-5:2009 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
AASHTO TP 99 : 2013 | METHOD OF TEST FOR DETERMINING THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE USING THE CONTINUOUS-FLOW TRAFFIC TIME-INTEGRATED METHOD (CTIM) |
ISO 13472-2:2010 | Acoustics Measurement of sound absorption properties of road surfaces in situ Part 2: Spot method for reflective surfaces |
AASHTO TP 98 : 2013 | METHOD OF TEST FOR DETERMINING THE INFLUENCE OF ROAD SURFACES ON VEHICLE NOISE USING THE STATISTICAL ISOLATED PASS-BY (SIP) METHOD |
PREN ISO 10819 : DRAFT 2011 | MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR THE MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO/DIS 10819:2011) |
I.S. EN ISO 10052:2005 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
CEI EN 60349-1 : 2012 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
AASHTO TP 99 : 2013 : R2015 | METHOD OF TEST FOR DETERMINING THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE USING THE CONTINUOUS-FLOW TRAFFIC TIME-INTEGRATED METHOD (CTIM) |
ISO/TS 4869-5:2006 | Acoustics — Hearing protectors — Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects |
ANSI S12.62 : 2012(R2017) | ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
I.S. EN 61481-2:2014 | LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C. |
NF EN 61400-11 : 2004 AMD 1 2006 | WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
I.S. EN ISO 10140-3:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION (ISO 10140-3:2010) |
UNE-EN ISO 16283-2:2016 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2015) |
ANSI S3.18 PT4 : 2003 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE BODY VIBRATION - PART 4: GUIDELINES FOR THE EVALUATION OF THE EFFECTS OF VIBRATION AND ROTATIONAL MOTION ON PASSENGER AND CREW COMFORT IN FIXED-GUIDEWAY TRANSPORT SYSTEMS |
ANSI S3.18 : 1979 | GUIDE FOR THE EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION |
ISO 17201-1:2005 | Acoustics Noise from shooting ranges Part 1: Determination of muzzle blast by measurement |
EN ISO 3740:2000 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000) |
BS EN ISO 3740:2001 | Acoustics. Determination of sound power levels of noise sources. Guidelines for the use of basic standards |
NF EN 61243-1 : 2005 AMD 1 2010 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
DIN EN 12215:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
BS EN ISO 140-6:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of impact sound insulation of floors |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 5136:2003 | Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method |
IEC 60349-2:2010 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors |
BS ISO 14837-1:2005 | Mechanical vibration. Ground-borne noise and vibration arising from rail systems General guidance |
BS EN ISO 11546-1:1996 | Acoustics. Determination of sound insulation performances of enclosures Measurements under laboratory conditions (for declaration purposes) |
BS EN ISO 3744:2010 | Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane |
BS EN ISO 14257:2001 | Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance |
DIN EN ISO 8253-3:2012-08 | Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012) |
EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
ECMA 275 : 3ED 2015 | MEASUREMENT OF STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES |
I.S. EN 12215:2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
I.S. EN ISO 3381:2011 | RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE INSIDE RAILBOUND VEHICLES |
I.S. EN ISO 8253-3:2012 | ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY (ISO 8253-3:2012) |
I.S. EN ISO 11957:2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF CABINS - LABORATORY AND IN SITU MEASUREMENTS |
I.S. EN ISO 3747:2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
I.S. EN ISO 5136:2009 | ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
I.S. EN ISO 7235:2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
I.S. EN ISO 3743-1:2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
DIN EN 15036-2:2006-12 | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator |
UNI EN ISO 11691 : 2009 | ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD |
DIN EN ISO 11200:1996-07 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014) |
I.S. EN ISO 11204:2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
I.S. EN ISO 3745:2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012) |
I.S. EN ISO 7731:2008 | ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS |
DIN EN ISO 7779:2011-01 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
I.S. EN ISO 3741:2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
DIN EN 13141-2:2010-12 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
I.S. EN ISO 8253-1:2010 | ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 1: PURE-TONE AIR AND BONE CONDUCTION AUDIOMETRY |
DIN EN ISO 3382-2:2008-09 | Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008) |
I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
I.S. EN ISO 1680:2013 | ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013) |
I.S. EN ISO 15006:2011 | ROAD VEHICLES - ERGONOMIC ASPECTS OF TRANSPORT INFORMATION AND CONTROL SYSTEMS - SPECIFICATIONS FOR IN-VEHICLE AUDITORY PRESENTATION (ISO 15006:2011) |
I.S. EN ISO 11546-2:2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES) |
I.S. EN ISO 11546-1:2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES) |
I.S. EN ISO 3744:2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
I.S. EN 13141-2:2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
I.S. EN ISO 2922:2000 | ACOUSTICS - MEASUREMENT OF AIRBORNE SOUND EMITTED BY VESSELS ON INLAND WATERWAYS AND HARBOURS (ISO 2922:2000) |
DIN EN ISO 10819:2013-12 | MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:2013) |
I.S. EN ISO 9614-3:2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING |
EN ISO 11691:2009 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
I.S. EN ISO 4869-4:2000 | ACOUSTICS - HEARING PROTECTORS - PART 4 - MEASUREMENT OF EFFECTIVE SOUND PRESSURE LEVELS FOR LEVEL-DEPENDENT SOUND-RESTORATION EAR-MUFFS |
I.S. EN ISO 11202:2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS |
I.S. EN ISO 11201:2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS |
DIN EN ISO 7235:2010-01 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
VDI 3743 Blatt 1:2003-09 | Characteristic noise emission values of technical sound sources - Pumps; Centrifugal pumps |
VDI 2038 Blatt 3:2013-11 | Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Secondary airborne sound - prognosis, measurement, evaluation and reduction measures |
VDI 2038 Blatt 1:2012-06 | Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Basics, methods, procedures and loads |
BS 848-6(2003) : 2003 | FANS FOR GENERAL PURPOSES - METHOD OF MEASUREMENT OF FAN VIBRATION |
BIS IS/ISO 2631-2 : 2003(R2007) | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE BODY VIBRATION - PART 2: VIBRATION IN BUILDINGS (1 HZ TO 80 HZ) |
SAE ARP 5534 : 2013 | APPLICATION OF PURE-TONE ATMOSPHERIC ABSORPTION LOSSES TO ONE-THIRD OCTAVE-BAND DATA |
UNE-EN 61400-11:2013 | Wind turbines - Part 11: Acoustic noise measurement techniques |
I.S. EN ISO 3740:2000 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS |
ISO 17497-2:2012 | Acoustics — Sound-scattering properties of surfaces — Part 2: Measurement of the directional diffusion coefficient in a free field |
ISO 16832:2006 | Acoustics Loudness scaling by means of categories |
10/30094845 DC : 0 | BS ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC TEST ROOMS AND HEMI-ANECHOIC TEST ROOMS |
UNI EN ISO 3382-3 : 2012 | ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES |
TS 103 740 : 1.1.2 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR WIDEBAND WIRELESS TERMINALS (HANDSFREE) FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER |
12/30239877 DC : 0 | BS EN 60065 ED 8.0 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
DIN EN ISO 24501:2011-04 | Ergonomics - Accessible design - Sound pressure levels of auditory signals for consumer products (ISO 24501:2010) |
10/30214903 DC : 0 | BS EN ISO 3095 - RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES |
PD CEN/TR 15068:2009 | Gas welding equipment. Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering. Measurement method |
CEI EN 60645-1 : 2016 | ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AUDIOMETRY |
BS EN ISO 10140-5:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT |
I.S. EN ISO 140-12:2000 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
09/30196772 DC : 0 | BS ISO 7240-24 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: SOUND-SYSTEM LOUDSPEAKERS |
PREN 50332-2 : DRAFT 2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY |
15/30333610 DC : 0 | BS EN ISO 11819-2.2 - ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 2: THE CLOSE-PROXIMITY METHOD |
09/30182105 DC : 0 | BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
I.S. EN ISO 5349-1:2002 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
ECMA 74 : 14ED 2017 | MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
BS EN 60349-2:2010 | Electrical traction. Rotating electrical machines for rail and road vehicles Electronic converter-fed alternating current motors |
BS EN 62520:2011 | Railway applications. Electric traction. Short-primary type linear induction motors (LIM) fed by power converters |
I.S. EN 60349-1:2010 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS |
UNE-EN ISO 10140-3:2011 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010) |
EN 1793-6:2012 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions |
BS EN 50332-1:2013 | Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology General method for \'one package equipment\' |
BS EN 60534-8-1:2005 | Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves |
ISO 10847:1997 | Acoustics — In-situ determination of insertion loss of outdoor noise barriers of all types |
UNE-EN 61481-1:2015 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
BS ISO 13473-5 : 2009 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
10/30205316 DC : 0 | BS EN 61400-11 - WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
NF EN ISO 3382-2 : 2010 | ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 2: REVERBERATION TIME IN ORDINARY ROOMS |
ES 201 377-2 : 1.4.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); SPECIFICATION AND MEASUREMENT OF SPEECH TRANSMISSION QUALITY; PART 2: MOUTH-TO-EAR SPEECH TRANSMISSION QUALITY INCLUDING TERMINALS |
ISO/TS 10811-2:2000 | Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification |
UNE-EN 62006:2011 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
00/702359 DC : DRAFT JAN 2000 | ISO/DIS 2631-2 - MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 2: VIBRATIONS IN BUILDINGS (1 HZ TO 80 HZ) |
I.S. EN 60534-8-1:2005 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
BS EN ISO 24504:2016 | Ergonomics. Accessible design. Sound pressure levels of spoken announcements for products and public address systems |
13/30281662 DC : 0 | BS EN 50332-1 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT" |
I.S. EN ISO 140-18:2006 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 18: LABORATORY MEASUREMENT OF SOUND GENERATED BY RAINFALL ON BUILDING ELEMENTS |
ISO 21727:2016 | Cinematography — Method of measurement of perceived loudness of short duration motion-picture audio material |
BS ISO 2969:2015 | Cinematography. B-chain electroacoustic reponse of motion-picture control rooms and indoor theatres. Specifications and measurements |
ISO 13474:2009 | Acoustics Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment |
BS ISO 16832:2006 | Acoustics. Loudness scaling by means of categories |
07/30174056 DC : 0 | BS EN 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
UNI EN 54-24 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
BS ISO 7731 : 2003 AMD 16047 | ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS |
BS EN 16272-4:2016 | Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound diffraction under direct sound field |
UNE-EN ISO 16251-1:2015 | Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014) |
15/30302184 DC : 0 | BS ISO 17208-1 - UNDERWATER ACOUSTICS - QUANTITIES AND PROCEDURES FOR DESCRIPTION AND PRECISION MEASUREMENT OF UNDERWATER SOUND FROM SHIPS - PART 1: REQUIREMENTS FOR PRECISION MEASUREMENTS IN DEEP WATER USED FOR COMPARISON PURPOSES |
I.S. EN ISO 24504:2016 | ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF SPOKEN ANNOUNCEMENTS FOR PRODUCTS AND PUBLIC ADDRESS SYSTEMS (ISO 24504:2014) |
CSA M5131 : 1997 | ACOUSTICS - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - MEASUREMENT OF NOISE AT THE OPERATOR'S POSITION - SURVEY METHOD |
PREN 50332-1 : DRAFT 2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT" |
UNI ISO 2631-1 : 2014 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
DIN EN ISO 16283-2:2016-05 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION (ISO 16283-2:2015) |
03/113341 DC : DRAFT SEP 2003 | BS EN ISO 140-11 - ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS |
BS EN 61237-4:1998 | Broadcast video tape recorders. Methods of measurement Analogue audio performance measurements |
ISO 13475-1:1999 | Acoustics — Stationary audible warning devices used outdoors — Part 1: Field measurements for determination of sound emission quantities |
BS EN 60704-1 : 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS |
ANSI S12.10 : 2002 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
NF EN 60534 8-1 : 2006 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
CEI EN 60349-2 : 2012 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
SAE J2834_201904 | Ride Index Structure and Development Methodology |
EN ISO 7779:2010 | Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2010) |
CSA IEC 61400-11 : 2013(R 2018) | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
IEC 62006:2010 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
I.S. EN 15610:2009 | RAILWAY APPLICATIONS - NOISE EMISSION - RAIL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
I.S. EN ISO 16283-3:2016 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FAADE SOUND INSULATION (ISO 16283-3:2016) |
S.R. CEN/TS 16272-7:2015 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 7: EXTRINSIC CHARACTERISTICS - IN SITU VALUES OF INSERTION LOSS |
ANSI S2.72 PT1 : 2002 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
DIN EN ISO 11204:2010-10 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
NF ISO 14695 : 2003 | INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION |
CEI EN 60534-8-1 : 2006 | VANNES DE REGULATION DES PROCESSUS INDUSTRIELS - PARTIE 8-1: CONSIDERATIONS SUR LE BRUIT - MESURE EN LABORATOIRE DU BRUIT CREE PAR UN DEBIT AERODYNAMIQUE A TRAVERS UNE VANNE DE REGULATION |
EN 61996-1 : 2013 COR 2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 61996-1:2013) |
ISO 10843:1997 | Acoustics — Methods for the description and physical measurement of single impulses or series of impulses |
UNE-EN 61481-2:2015 | Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
ISO/TS 19425:2015 | Reciprocating internal combustion engines — Measurement method for air cleaners — Sound power level of combustion air inlet noise and insertion loss using sound pressure |
I.S. EN 61400-11:2013 | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES (IEC 61400-11:2012 (EQV)) |
ANSI/ASA S12.50/ISO 3740 : 2002(R2017) | Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards - Nationally Adopted International Standards |
ISO 10819:2013 | Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
TS 102 924 : 1.2.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR SUPERWIDEBAND/FULLBAND HEADSET TERMINALS FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER |
I.S. EN ISO 10819:2013 | MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:2013) |
UNE-EN ISO 16283-1:2015 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 16283-1:2014) |
I.S. EN 60268-5:2003 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
UNI EN 1793-6 : 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
ANSI S12.11-2 : 2013 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS |
ISO 17208-1:2016 | Underwater acoustics Quantities and procedures for description and measurement of underwater sound from ships Part 1: Requirements for precision measurements in deep water used for comparison purposes |
UNI CEN/TS 16272-5 : 2014 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS |
BS EN ISO 7779:2010 | Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment |
EN 62006:2011 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
UNI EN 54-16 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
EG 201 377-2 : 1.3.1 | SPEECH PROCESSING, TRANSMISSION AND QUALITY ASPECTS (STQ); SPECIFICATION AND MEASUREMENT OF SPEECH TRANSMISSION QUALITY; PART 2: MOUTH-TO-EAR SPEECH TRANSMISSION QUALITY INCLUDING TERMINALS |
ISO 6969:2004 | Road vehicles — Sound signalling devices — Tests after mounting on vehicle |
UNI EN ISO 10052 : 2010 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
ISO 7240-24:2016 | Fire detection and fire alarm systems Part 24: Fire alarm loudspeakers |
ISO 7779:2010 | Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment |
I.S. EN 60268-16:2011 | SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX |
DIN EN ISO 5349-1:2001-12 | MECHANICAL VIBRATIONS - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
DIN EN ISO 1680:2014-04 | ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013) |
DIN EN ISO 15006:2012-04 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation (ISO 15006:2011) |
DIN EN ISO 3747:2011-03 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
UNI EN ISO 11202 : 2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS |
DIN EN ISO 3741:2011-01 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
UNE-EN 60349-2:2011 | Electric traction - Rotating electrical machines for rail and road vehicles -- Part 2: Electronic converter-fed alternating current motors |
ISO 140-11:2005 | Acoustics Measurement of sound insulation in buildings and of building elements Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors |
BS EN ISO 11819-1:2001 | Acoustics. Measurement of the influence of road surfaces on traffic noise Statistical pass-by method |
UNE-EN ISO 11203:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
ISO 14837-1:2005 | Mechanical vibration Ground-borne noise and vibration arising from rail systems Part 1: General guidance |
ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
UNE-EN ISO 5136:2010 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
UNE-EN 13141-2:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
UNE-EN ISO 8253-1:2011 | Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010) |
ISO 3747:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
BS EN ISO 16032:2004 | Acoustics. Measurement of sound pressure level from service equipment in buildings. Engineering method |
ISO 3741:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms |
IEC 61183:1994 | Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters |
BS EN ISO 5349-1:2001 | Mechanical vibration. Measurement and evaluation of human exposure to hand-transmitted vibration General requirements |
ISO/TR 4869-4:1998 | Acoustics Hearing protectors Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs |
EN 60268-16:2011 | SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX |
EN ISO 11203:2009 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
ANSI/ASA S12.10 PART 1:2010(R2020) | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT - PART 1: DETERMINATION OF SOUND POWER LEVEL AND EMISSION SOUND PRESSURE LEVEL |
UNI EN ISO 11203 : 2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
I.S. EN ISO 11203:2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
EN ISO 8253-1:2010 | Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010) |
EN 15036-2:2006 | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator |
UNI EN ISO 3744 : 2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
UNI EN ISO 11204 : 2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
UNI EN ISO 9614-3 : 2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING |
UNI EN ISO 11904-1 : 2006 | ACOUSTICS - DETERMINATION OF SOUND IMMISSION FROM SOUND SOURCES PLACED CLOSE TO THE EAR - PART 1: TECHNIQUE USING A MICROPHONE IN A REAL EAR (MIRE TECHNIQUE) |
UNI EN ISO 11957 : 2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF CABINS - LABORATORY AND IN SITU MEASUREMENTS |
UNI EN ISO 4871 : 2009 | ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
UNI EN ISO 10819 : 2013 | MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND |
UNI EN ISO 3095 : 2013 | ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES |
UNI EN ISO 11201 : 2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
UNI EN 13141-2 : 2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
UNI EN ISO 7235 : 2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
UNI EN ISO 7731 : 2009 | ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS |
UNI EN ISO 5349-1 : 2004 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
UNI EN ISO 5136 : 2009 | ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
UNI EN ISO 3747 : 2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
UNI EN ISO 3741 : 2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
UNI EN ISO 3743-1 : 2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
UNI EN 12215 : 2010 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
UNI EN ISO 11546-1 : 2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES) |
UNI EN ISO 15006 : 2012 | ROAD VEHICLES - ERGONOMIC ASPECTS OF TRANSPORT INFORMATION AND CONTROL SYSTEMS - SPECIFICATIONS FOR IN-VEHICLE AUDITORY PRESENTATION |
UNI ISO 14837-1 : 2013 | MECHANICAL VIBRATION - GROUND-BORNE NOISE AND VIBRATION ARISING FROM RAIL SYSTEMS - PART 1: GENERAL GUIDANCE |
UNI EN ISO 11546-2 : 2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES) |
UNI EN ISO 8253-1 : 2010 | ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 1: PURE-TONE AIR AND BONE CONDUCTION AUDIOMETRY |
UNI EN ISO 1680 : 2014 | ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES |
SAE ARP1307B | Measurement of Exterior Noise Produced by Aircraft Auxiliary Power Units (APUs) and Associated Aircraft Systems During Ground Operation |
UNE-EN 54-16:2010 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
UNE-EN 60349-4:2013 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
DIN EN ISO 10140-5 E : 2014 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010 + AMD.1:2014) |
UNI EN ISO 3382-1 : 2009 | ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 1: PERFORMANCE SPACES |
BS EN ISO 17201-1:2005 | Acoustics. Noise from shooting ranges Determination of muzzle blast by measurement |
UNI ISO 9613-2 : 2006 | ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
DIN EN 1793-6:2013-04 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN-SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
DIN EN ISO 11202:2010-10 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
I.S. EN 62520:2011 | RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS (LIM) FED BY POWER CONVERTERS |
99/561983 DC : APR 99 | ISO/DIS 14257 - ACOUSTICS - MEASUREMENT AND MODELLING OF SPATIAL SOUND DISTRIBUTION CURVES IN WORKROOMS FOR EVALUATION OF THEIR ACOUSTICAL PERFORMANCE |
BS ISO 17208-1:2016 | Underwater acoustics. Quantities and procedures for description and measurement of underwater sound from ships Requirements for precision measurements in deep water used for comparison purposes |
PD CEN/TS 16272-5:2014 | Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound reflection under direct sound field conditions |
CSA ISO 5349-1 : 2016 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
DIN EN ISO 3382-1:2009-10 | ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 1: PERFORMANCE SPACES |
13/30273788 DC : 0 | BS ISO 11819-2 - ACOUSTICS - METHOD FOR MEASURING THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 2: CLOSE-PROXIMITY METHOD |
NFE 90 401-2 : 2001 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 2: GENERAL REQUIREMENTS |
06/30081121 DC : DRAFT MAR 2006 | ISO/DIS 3382-2 - ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 2: REVERBERATION TIME IN ORDINARY ROOMS |
07/30164074 DC : 0 | BS ISO 13472-2 - ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION PROPERTIES OF ROAD SURFACES IN SITU - PART 2: SPOT METHOD FOR REFLECTIVE SURFACES |
ISO 16283-1:2014 | Acoustics Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
I.S. EN 50332-1:2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 1: GENERAL METHOD FOR ONE PACKAGE EQUIPMENT |
DIN EN ISO 3744:2011-02 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
09/30197819 DC : 0 | BS ISO 2631-1/AMD1 - MECHANICAL VIBRATION - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
BS EN ISO 3382-3:2012 | Acoustics. Measurement of room acoustic parameters Open plan offices |
I.S. EN ISO 354:2003 | ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM |
09/30184412 DC : 0 | BS ISO 24501 - ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF AUDITORY SIGNALS FOR CONSUMER PRODUCTS |
ISO 17497-1:2004 | Acoustics — Sound-scattering properties of surfaces — Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room |
I.S. EN ISO 8041:2005 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
BS ISO 13473-3:2002 | Characterization of pavement texture by use of surface profiles Specification and classification of profilometers |
ISO/TS 13473-4:2008 | Characterization of pavement texture by use of surface profiles — Part 4: Spectral analysis of surface profiles |
10/30210277 DC : 0 | BS ISO 15006 - ROAD VEHICLES - ERGONOMICS ASPECTS OF TRANSPORT INFORMATION AND CONTROL SYSTEMS - SPECIFICATIONS FOR IN-VEHICLE AUDITORY PRESENTATION |
08/30103108 DC : DRAFT FEB 2008 | BS ISO 13474 - ACOUSTICS - FRAMEWORK FOR CALCULATING A DISTRIBUTION OF SOUND EXPOSURE LEVELS OF IMPULSIVE SOUND EVENTS FOR PURPOSES OF ENVIRONMENTAL NOISE ASSESSMENT |
09/30203211 DC : 0 | BS ISO 3382-3 - ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN SPACES |
DD ISO/TS 13474:2003 | Acoustics. Impulse sound propagation for environmental noise assessment |
BS EN 61183:1995 | Electroacoustics. Random-incidence and diffuse-field calibration of sound level meters |
ANSI S12.51 : 2012 : R2017 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
UNI EN 15610 : 2009 | RAILWAY APPLICATIONS - NOISE EMISSION - RAIL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
AASHTO TP 98 : 2013 : R2015 | METHOD OF TEST FOR DETERMINING THE INFLUENCE OF ROAD SURFACES ON VEHICLE NOISE USING THE STATISTICAL ISOLATED PASS-BY (SIP) METHOD |
UNE-ISO 2631-4:2014 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems — Amendment 1 |
03/303500 DC : DRAFT FEB 2003 | ISO 6969 - ROAD VEHICLES - SOUND SIGNALLING DEVICES - TESTS AFTER MOUNTING ON VEHICLE |
DIN EN 15610:2009-08 | Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation |
BS EN 1793-4:2015 | Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound diffraction |
14/30296484 DC : 0 | BS EN 1793-5 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS |
13/30267621 DC : 0 | BS EN 61481-1 ED 1.0 - LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
08/30087659 DC : 0 | ISO 10140-5 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT |
CEI EN 61400-11 : 2014 | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
BS ISO 17497-2:2012 | Acoustics. Sound-scattering properties of surfaces Measurement of the directional diffusion coefficient in a free field |
12/30234183 DC : 0 | BS ISO 24504 - ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF SPOKEN ANNOUNCEMENTS FOR PRODUCTS AND PUBLIC ADDRESS SYSTEMS |
UNE-EN 60065:2015 | Audio, video and similar electronic apparatus - Safety requirements |
01/564696 DC : DRAFT NOV 2001 | BS ISO 7731 - ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS |
BS EN ISO 24501:2010 | Ergonomics. Accessible design. Sound pressure levels of auditory signals for consumer products |
BS EN 54-24:2008 | Fire detection and fire alarm systems Components of voice alarm systems. Loudspeakers |
BS EN 61996-2:2008 | Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR) Simplified voyage data recorder (S-VDR). Performance requirements, methods of testing and required test results |
ISO 140-8:1997 | Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
14/30297521 DC : 0 | BS EN 16272-4 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD CONDITIONS |
08/30176438 DC : DRAFT JAN 2008 | BS EN 60645-1 - ELECTRO ACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: PURE-TONE AUDIOMETERS |
BS ISO 13472-1:2002 | Acoustics. Measurement of sound absorption properties of road surfaces in situ Extended surface method |
CEI EN 61996-2 : 2011 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE ATA RECORDER (S-VDR) - PERFORMANCE REQUIREMENTS, METHODS OF ESTING AND REQUIRED TEST RESULTS |
BS EN ISO 13473-5:2009 | Characterization of pavement texture by use of surface profiles Determination of megatexture |
I.S. EN 61237-4:1998 | BROADCAST VIDEO TAPE RECORDERS - METHODS OF MEASUREMENT - PART 4: ANALOGUE PERFORMANCE MEASUREMENTS |
BS EN ISO 3382-2:2008 | Acoustics. Measurement of room acoustic parameters Reverberation time in ordinary rooms |
DIN ISO 13473-5:2009-10 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
BS EN 50332-2:2013 | Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design |
UNI ISO 230-5 : 2010 | TEST CODE FOR MACHINE TOOLS - PART 5: DETERMINATION OF THE NOISE EMISSION |
BS ISO 14695:2003 | Industrial fans. Method of measurement of fan vibration |
DD IEC PAS 61996-2 : DRAFT DEC 2005 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) - PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
DD ISO/TS 4869-5:2006 | Acoustics. Hearing protectors Method for estimation of noise reduction using fitting by inexperienced test subjects |
ANSI S1.42 : 2001 : R2011 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
UNI EN 15461 : 2011 | RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS |
ANSI/ASA S12.53 PART 1 : 2011(R2016) | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
UNI EN ISO 24501 : 2011 | ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF AUDITORY SIGNALS FOR CONSUMER PRODUCTS |
CSA C22.2 No. 60065 : 2016 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
UNE-EN 1793-4:2015 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction |
CEI EN 60118-15 : 2014 | ELECTROACOUSTICS - HEARING AIDS - PART 15: METHODS FOR CHARACTERISING SIGNAL PROCESSING IN HEARING AIDS WITH A SPEECH-LIKE SIGNAL |
ANSI S1.42 : 2001 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
UNI EN ISO 3382-2 : 2008 | ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS |
CEI EN 62006 : 2011 | HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
I.S. EN 60065:2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
ANSI S12.50 : 2002 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS |
TS 103 738 : 1.1.2 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR NARROWBAND WIRELESS TERMINALS (HANDSFREE) FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER |
PREN 1459-7 : DRAFT 2017 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 7: TEST METHOD AND DETERMINATION OF NOISE EMISSION |
I.S. EN 60349-2:2010 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
I.S. EN 61606-3:2008 | AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 3: PROFESSIONAL USE |
ISO 13473-3:2002 | Characterization of pavement texture by use of surface profiles — Part 3: Specification and classification of profilometers |
ISO 1996-2:2017 | Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels |
NF EN ISO 7779 : 2010 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
BS EN 15610:2009 | Railway applications. Noise emission. Rail roughness measurement related to rolling noise generation |
16/30348450 DC : 0 | BS EN 13819-3 - HEARING PROTECTORS - TESTING - PART 3: SUPPLEMENTARY ACOUSTIC TEST METHOD |
ANSI S2.72/Part 1-2002(R2007) | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
ANSI S3.42-2 : 2012 | TESTING HEARING AIDS - PART 2: METHODS FOR CHARACTERIZING SIGNAL PROCESSING IN HEARING AIDS WITH A SPEECH-LIKE SIGNAL |
I.S. EN 54-24:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
ANSI S1.42 : 2001(R2016) | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
I.S. EN 61243-3:2014 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
BS EN 60704-2-3:2002 | Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements for dishwashers |
CEI EN 61265 : 1996 | ELECTROACOUSTICS - INSTRUMENTS FOR MEASUREMENT OF AIRCRAFT NOISE - PERFORMANCE REQUIREMENTS FOR SYSTEMS TO MEASURE ONE-THIRD-OCTAVE BAND SOUND PRESSURE LEVELS IN NOISE CERTIFICATION OF TRANSPORT-CATEGORY AEROPLANES |
CEI EN 61606-3 : 2009 | AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 3: PROFESSIONAL USE |
BS EN 61400-11 : 2013 | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
BS EN ISO 10819:2013 | Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
EN 15610:2009 | Railway applications - Noise emission - Rail roughness measurement related to noise generation |
I.S. EN 61243-1:2005 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
NF EN ISO 11202 : 2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS |
I.S. EN 54-16:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
ISO 10302-2:2011 | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements |
I.S. EN 62006:2011 | HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
ISO 14695:2003 | Industrial fans — Method of measurement of fan vibration |
ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
EN ISO 3381:2011 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
UNE-EN 60645-1:2015 | Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone audiometry |
EN ISO 11200:2014 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
I.S. EN ISO 11200:2014 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012) |
DIN EN ISO 11904-2:2005-02 | Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2004) |
DIN EN ISO 2922:2013-12 | Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000 + Amd 1:2013) (includes Amendment :2013) |
DIN EN ISO 14257:2011-11 | Acoustics - Measurement and parametric description of of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001) |
NF EN ISO 2922 : 2001 AMD 1 2013 | ACOUSTICS - MEASUREMENT OF AIRBORNE SOUND EMITTED BY VESSELS ON INLAND WATERWAYS AND HARBOURS |
BS EN ISO 1680:2013 | Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines |
UNE-EN ISO 3747:2010 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ (ISO 3747:2000) |
BS EN ISO 140-4:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation between rooms |
BS EN ISO 5136:2009 | Acoustics. Determination of sound power radiated into a duct by fans and other air-moving devices. In-duct method |
ISO 3382:1997 | Acoustics — Measurement of the reverberation time of rooms with reference to other acoustical parameters |
ISO 16032:2004 | Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method |
BS EN 15036-2:2006 | Heating boilers. Test regulations for airborne noise emissions from heat generators Flue gas noise emissions at the outlet of the heat generator |
BS EN ISO 11821:1997 | Acoustics. Measurement of the in situ sound attenuation of a removable screen |
ISO 11546-1:1995 | Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes) |
ISO 10052:2004 | Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method |
ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
ISO 16251-1:2014 | Acoustics — Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up — Part 1: Heavyweight compact floor |
ISO 2922:2000 | Acoustics Measurement of airborne sound emitted by vessels on inland waterways and harbours |
ISO 11904-1:2002 | Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 1: Technique using a microphone in a real ear (MIRE technique) |
IEC 61400-11:2012 | Wind turbines - Part 11: Acoustic noise measurement techniques |
ISO 9614-3:2002 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning |
ISO 4869-3:2007 | Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture |
ISO 18233:2006 | Acoustics Application of new measurement methods in building and room acoustics |
ISO 11691:1995 | Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method |
ISO 3381:2005 | Railway applications Acoustics Measurement of noise inside railbound vehicles |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
IEC 61606-3:2008 | Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 3: Professional use |
BS EN 15433-4:2007 | Transportation loads. Measurement and evaluation of dynamic mechanical loads Data evaluation |
ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
BS EN ISO 4869-4:2000 | Acoustics. Hearing protectors Measurement of effective sound pressure levels for level-dependent sound-restoration ear muffs |
BS EN ISO 11546-2:2009 | Acoustics. Determination of sound insulation performances of enclosures Measurements in situ (for acceptance and verification purposes) |
BS EN ISO 11203:2009 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
UNI EN ISO 11200 : 2014 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS |
ISO 10140-3:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation |
ISO 11200:2014 | Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
UNE-EN ISO 7235:2010 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
ISO 24501:2010 | Ergonomics Accessible design Sound pressure levels of auditory signals for consumer products |
ISO 1680:2013 | Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines |
ISO 3382-1:2009 | Acoustics — Measurement of room acoustic parameters — Part 1: Performance spaces |
ISO 7235:2003 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss |
ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
IEC 60268-5:2003+AMD1:2007 CSV | Sound system equipment - Part 5: Loudspeakers |
ISO 140-5:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of faade elements and faades |
ISO 11957:1996 | Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements |
IEC 62585:2012 | Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter |
ISO 266:1997 | Acoustics — Preferred frequencies |
ISO 24504:2014 | Ergonomics Accessible design Sound pressure levels of spoken announcements for products and public address systems |
UNE-EN ISO 3744:2011 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
IEC 60704-1:2010 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements |
ISO 8253-1:2010 | Acoustics Audiometric test methods Part 1: Pure-tone air and bone conduction audiometry |
ISO 11819-1:1997 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method |
ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
IEC 61237-4:1997 | Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements |
ISO 16283-3:2016 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation |
UNE-EN ISO 9614-3:2010 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
UNE-EN ISO 12001:2010 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
UNE-EN ISO 11546-2:2010 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
IEC 60118-15:2012 | Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal |
IEC 61243-3:2014 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
ISO 14257:2001 | Acoustics — Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance |
UNE-EN ISO 10140-5:2011 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010) |
UNE-EN ISO 3095:2014 | Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013) |
ISO 3382-3:2012 | Acoustics Measurement of room acoustic parameters Part 3: Open plan offices |
BS EN ISO 3381:2011 | Railway applications. Acoustics. Measurement of noise inside railbound vehicles |
ISO 140-6:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors |
IEC 62520:2011 | Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters |
BS EN ISO 3743-1:2009 | Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fields Comparison method for hard-walled test rooms |
ISO 15006:2011 | Road vehicles — Ergonomic aspects of transport information and control systems — Specifications for in-vehicle auditory presentation |
UNE-EN ISO 3743-1:2011 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
ISO 3382-2:2008 | Acoustics Measurement of room acoustic parameters Part 2: Reverberation time in ordinary rooms |
UNE-EN ISO 3746:2010 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995) |
BS EN ISO 3747:2010 | Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment |
BS EN ISO 11204:2010 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
IEC 60349-4:2012 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
ISO 13473-5:2009 | Characterization of pavement texture by use of surface profiles Part 5: Determination of megatexture |
BS EN ISO 11200:2014 | Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
ISO 11821:1997 | Acoustics — Measurement of the in situ sound attenuation of a removable screen |
IEC 61996-1:2013 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: Performance requirements, methods of testing and required test results |
BS EN ISO 2922 : 2001 | ACOUSTICS - MEASUREMENT OF AIRBORNE SOUND EMITTED BY VESSELS ON INLAND WATERWAYS AND HARBOURS |
IEC 60349-1:2010 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors |
ISO 11546-2:1995 | Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes) |
UNE-EN 60349-1:2011 | Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic converter-fed alternating current motors |
BS EN ISO 11820:1997 | Acoustics. Measurements on silencers in situ |
BS EN ISO 4871:2009 | Acoustics. Declaration and verification of noise emission values of machinery and equipment |
IEC 60268-16:2011 | Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index |
IEC 61996:2000 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements - Methods of testing and required test results |
BS EN ISO 12001:2009 | Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code |
UNE-EN ISO 3741:2011 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
IEC 61481-2:2014 | Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1kV to 36 kV a.c. |
ISO 8253-3:2012 | Acoustics Audiometric test methods Part 3: Speech audiometry |
BS EN ISO 140-7:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of impact sound insulation of floors |
ISO 140-18:2006 | Acoustics Measurement of sound insulation in buildings and of building elements Part 18: Laboratory measurement of sound generated by rainfall on building elements |
BS EN ISO 140-5:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation of facade elements and facades |
UNE-EN ISO 4871:2010 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
UNE-EN 61243-3:2015 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
EN 62520:2011 | Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters |
EN ISO 140-18:2006 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 18: Laboratory measurement of sound generated by rainfall on building elements (ISO 140-18:2006) |
EN ISO 11904-1:2002 | Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using a microphone in a real ear (MIRE technique) (ISO 11904-1:2002) |
EN ISO 140-4:1998 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998) |
EN ISO 18233:2006 | Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006) |
EN ISO 4869-4:2000 | Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998) |
EN ISO 11957:2009 | Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
EN 16272-4:2016 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field |
EN ISO 4869-3:2007 | Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007) |
EN ISO 11819-1:2001 | Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:1997) |
EN ISO 11821:1997 | Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997) |
EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
EN ISO 15006:2011 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation (ISO 15006:2011) |
EN ISO 24504:2016 | Ergonomics - Accessible design - Sound pressure levels of spoken announcements for products and public address systems (ISO 24504:2014) |
EN ISO 12001:2009 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
EN ISO 140-7:1998 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998) |
EN ISO 140-11:2005 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors (ISO 140-11:2005) |
EN ISO 140-5:1998 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of façade elements and façades (ISO 140-5:1998) |
EN 54-24:2008 | Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers |
EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
EN ISO 13473-5:2009 | Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009) |
EN ISO 140-12 : 2000 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
EN 54-16:2008 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
EN ISO 140-6 : 1998 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS |
EN ISO 9614-3:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
EN ISO 3095:2013 | Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013) |
EN ISO 24501:2010 | Ergonomics - Accessible design - Sound pressure levels of auditory signals for consumer products (ISO 24501:2010) |
EN ISO 3382 : 2000 | ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS |
EN 15433-4:2007 | Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation |
EN ISO 16032:2004 | Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004) |
EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
EN ISO 3382-1:2009 | Acoustics - Measurement of room acoustic parameters - Part 1: Performance spaces (ISO 3382-1:2009) |
EN ISO 266:1997 | Acoustics - Preferred frequencies (ISO 266:1997) |
EN ISO 140-8 : 1997 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR |
EN ISO 1680:2013 | Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013) |
EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
EN ISO 5136:2009 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
EN ISO 7235:2009 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
EN ISO 14257:2001 | Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001) |
EN ISO 11546-2:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
EN ISO 11546-1:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
EN ISO 16283-3:2016 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO 16283-3:2016) |
EN ISO 3747:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
UNI EN ISO 8253-3 : 2012 | ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY |
EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
EN 15461:2008+A1:2010 | Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements |
07/30168731 DC : 0 | BS EN 61606-3 - AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENTS METHODS OF AUDIO CHARACTERISTICS - PART 3: PROFESSIONAL USE (TC 100) |
ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
ISO 13472-1:2002 | Acoustics Measurement of sound absorption properties of road surfaces in situ Part 1: Extended surface method |
BS EN 61481-1:2014 | Live working. Phase comparators Capacitive type to be used for voltages exceeding 1 kV a.c. |
BS EN ISO 16283-3:2016 | Acoustics. Field measurement of sound insulation in buildings and of building elements Façade sound insulation |
UNE-EN ISO 13473-5:2010 | Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009) |
03/321016 DC : DRAFT DEC 2003 | IEC 60534-8-1 ED.2 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
14/30295928 DC : 0 | BS EN ISO 16283-3 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FACADE SOUND INSULATION |
01/562316 DC : DRAFT JULY 2001 | BS EN ISO 7235 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
I.S. EN ISO 24501:2010 | ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF AUDITORY SIGNALS FOR CONSUMER PRODUCTS |
15/30274135 DC : 0 | BS ISO 18405 - UNDERWATER ACOUSTICS - TERMINOLOGY |
I.S. EN 60704-1:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010 (EQV)) |
BS ISO 15619:2013 | Reciprocating internal combustion engines. Measurement method for exhaust silencers. Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio |
I.S. EN ISO 16283-1:2014 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION (ISO 16283-1:2014) |
11/30212883 DC : 0 | BS EN ISO 10819 - MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR THE MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND |
DIN EN ISO 16251-1:2014-11 | ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014) |
12/30240135 DC : 0 | BS ISO 11200 - ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS |
CEN/TR 15068:2009 | Gas welding equipment - Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering - Measurement method |
ISO 3095:2013 | Acoustics Railway applications Measurement of noise emitted by railbound vehicles |
BS ISO 8579-1:2002 | Acceptance code for gear units Test code for airborne sound |
BS EN ISO 16283-2:2015 | Acoustics. Field measurement of sound insulation in buildings and of building elements Impact sound insulation |
BS EN 61243-1 : 2005 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
08/30087650 DC : 0 | ISO 10140-3 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION |
UNI EN ISO 16251-1 : 2014 | ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR |
03/311729 DC : DRAFT JULY 2003 | EN ISO 8041 - HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
BS EN 62006:2011 | Hydraulic machines. Acceptance tests of small hydroelectric installations |
14/30279048 DC : DRAFT OCT 2014 | BS EN ISO 389-3 - ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 3: REFERENCE EQUIVALENT THRESHOLD FORCE LEVELS FOR PURE TONES AND BONE VIBRATORS |
DIN EN ISO 11203:2010-01 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
09/30166871 DC : 0 | BS EN 62520 - RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS FED BY POWER CONVERTERS |
BS EN 62585:2012 | Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter |
PD ISO/PAS 17208-1:2012 | Acoustics. Quantities and procedures for description and measurement of underwater sound from ships General requirements for measurements in deep water |
BS EN ISO 3095:2013 | Acoustics. Railway applications. Measurement of noise emitted byrailbound vehicles |
CEI EN 62585 : 2013 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER |
BIS IS 12193-3 : 2012(R2015) | METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 3: RECEIVERS FOR FREQUENCY-MODULATED SOUND BROADCASTING EMISSIONS |
11/30253666 DC : 0 | BS EN 61996-1 - MARITIME NAVIGATION AND RADIO COMMUNICATION EQUIPMENT AND SYSTEMS - SHIP BORNE VOYAGE DATA RECORDER (VDR) - PART 1: VOYAGE DATA RECORDER (VDR) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
DIN EN 15461:2011-01 | Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements (includes Amendment A1:2010) |
10/30194376 DC : 0 | BS EN 62585 ED.1 - ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN FREE-FIELD RESPONSE OF A SOUND LEVEL METER |
DIN EN ISO 3745:2012-07 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017) |
12/30239340 DC : 0 | BS ISO 16251-1 - ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT FLOOR |
BS ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity |
UNI EN 15433-4 : 2008 | TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC MECHANICAL LOADS - PART 4: DATA EVALUATION |
11/30206274 DC : 0 | BS EN 60349-4 - ELECTRIC TRACTION ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER |
16/30346489 DC : 0 | BS ISO 20233-1 - SHIPS AND MARINE TECHNOLOGY - MODEL TEST METHOD FOR PROPELLER CAVITATION NOISE EVALUATION IN SHIP DESIGN - PART 1: SOURCE LEVEL ESTIMATION |
BS EN 61043:1994 | Specification for electroacoustics. Instruments for the measurement of sound intensity. Measurement with pairs of pressure sensing microphones |
ANSI S12.9 PT3 : 2013 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL SOUND - PART 3: SHORT-TERM MEASUREMENTS WITH AN OBSERVER PRESENT |
12/30250454 DC : 0 | BS ISO 16283-1 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION |
BS ISO 21289:2008 | Mechanical vibration and shock. Parameters to be specified for the acquisition of vibration data |
BS EN 54-16:2008 | Fire detection and fire alarm systems Voice alarm control and indicating equipment |
UNI EN ISO 10140-5 : 2014 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT |
DIN EN ISO 3095:2014-07 | ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES (ISO 3095:2013) |
BS EN 60268-16:2011 | Sound system equipment Objective rating of speech intelligibility by speech transmission index |
UNE-EN 62585:2013 | Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter |
CEI EN 60315-4 : 1999 | METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 4: RECEIVERS FOR FREQUENCY-MODULATED SOUND BROADCASTING EMISSIONS |
05/30081113 DC : DRAFT JAN 2005 | ISO 140-18 - ACOUSTICS - MEASUREMENT OF SOUND INSULATION AND OF BUILDING ELEMENTS - PART 18: LABORATORY MEASUREMENT OF SOUND GENERATED BY RAINFALL ON BUILDING ELEMENTS |
BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
06/30147250 DC : DRAFT MAR 2006 | EN ISO 3741 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
I.S. EN 60349-4:2013 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER (IEC 60349-4:2012 (EQV)) |
UNI EN ISO 13473-5 : 2010 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
I.S. EN ISO 16283-2:2015 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION (ISO/DIS 16283-2:2013) |
ANSI S2.72 PT4 : 2003 (R2012) | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 4: GUIDELINES FOR THE EVALUATION OF THE EFFECTS OF VIBRATION AND ROTATIONAL MOTION ON PASSENGER AND CREW COMFORT IN FIXED-GUIDEWAY TRANSPORT SYSTEMS |
ISO 2631-4:2001 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
I.S. EN 50332-2:2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY, OR ARE OFFERED AS ONE PACKAGE EQUIPMENT BUT WITH STANDARDISED CONNECTORS BETWEEN THE TWO ALLOWING TO COMBINE COMPONENTS OF DIFFERENT MANUFACTURERS |
NF ISO 2631-2 : 2014 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 2: VIBRATION IN BUILDINGS (1 HZ TO 80 HZ) |
UNE-EN 60118-15:2012 | Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal |
I.S. EN ISO 3382-2:2008 | ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 2: REVERBERATION TIME IN ORDINARY ROOMS |
ISO/TS 13474:2003 | Acoustics Impulse sound propagation for environmental noise assessment |
ISO 15619:2013 | Reciprocating internal combustion engines — Measurement method for exhaust silencers — Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio |
I.S. EN ISO 17201-1:2005 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT |
DIN EN 54-24:2008-06 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
TS 103 222-1 : 1.2.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); REFERENCE BENCHMARKING, BACKGROUND TRAFFIC PROFILES AND KPIS; PART 1: REFERENCE BENCHMARKING, BACKGROUND TRAFFIC PROFILES AND KPIS FOR VOIP AND FOIP IN FIXED NETWORKS |
I.S. EN 61996-2:2008 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
ANSI S12.51:2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
ANSI S12.54:2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
ANSI/ASA S12.57 : 2011(R2016) | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
ANSI S12.50 : 2002 : R2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS |
17/30364315 DC : 0 | BS EN 1459-7 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 7: TEST METHOD AND DETERMINATION OF NOISE EMISSION |
ANSI S2.72 PT1 : 2002 : R2012 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
ANSI S12.55 : 2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS |
ANSI/ASA S1.42 : 2001(R2016) | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
ANSI S12.50 : 2002 : R2007 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS |
ES 201 168 : 1.2.1 | CORPORATE TELECOMMUNICATION NETWORKS (CN); TRANSMISSION CHARACTERISTICS OF DIGITAL PRIVATE BRANCH EXCHANGES (PBXS) |
UNE-EN 15610:2010 | Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation |
ANSI/ASA S12.10 PART 1 : 2010 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT - PART 1: DETERMINATION OF SOUND POWER LEVEL AND EMISSION SOUND PRESSURE LEVEL |
UNI EN ISO 17201-1 : 2006 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT |
ISO/TS 13475-2:2000 | Acoustics — Stationary audible warning devices used outdoors — Part 2: Precision methods for determination of sound emission quantities |
IEC PAS 61996-2:2005 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements - Methods of testing and required test results |
IEC 60315-4:1997 | Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions |
DIN EN ISO 3743-1:2011-01 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
ISO 13473-2:2002 | Characterization of pavement texture by use of surface profiles — Part 2: Terminology and basic requirements related to pavement texture profile analysis |
UNE-EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997) |
DIN EN ISO 18233:2006-08 | Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006) |
DIN EN ISO 7731:2008-12 | ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS |
DIN EN ISO 9614-3:2009-11 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
IEC 61996-2:2007 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results |
BS EN ISO 11202:2010 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
ISO/TS 7849-2:2009 | Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor |
ISO 140-7:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floors |
UNE-EN ISO 11957:2010 | Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
BS EN ISO 10052 : 2004 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
BS EN ISO 140-11:2005 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors |
BS EN ISO 140-8:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
BS EN ISO 9614-3:2009 | Acoustics. Determination of sound power levels of noise sources using sound intensity Precision method for measurement by scanning |
BS EN ISO 266:1997 | Acoustics. Preferred frequencies |
BS EN ISO 18233:2006 | Acoustics. Application of new measurement methods in building and room acoustics |
BS EN ISO 11904-2:2004 | Acoustics. Determination of sound immission from sound sources placed close to the ear Technique using a manikin |
ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
ISO 10140-5:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
ISO 8041:2005 | Human response to vibration Measuring instrumentation |
IEC 61043:1993 | Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones |
NF EN 60268-16 : 2015 | SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX |
DIN EN ISO 10140-5:2014-09 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010 + Amd.1:2014) (includes Amendment A1:2014) |
CEN/TS 16272-5:2014 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions |
DIN EN ISO 3745:2017-10 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017) |
EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
EN ISO 8253-3:2012 | Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012) |
DIN EN ISO 10140-3:2015-11 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010 + Amd. 1:2015) (includes Amendment A1:2015) |
EN 61996:2000 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements - Methods of testing and required test results |
EN 61237-4:1997 | Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements |
EN ISO 3382-3:2012 | Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2012) |
DIN EN ISO 12001:2010-01 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
EN 60349-4:2013 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
UNI EN ISO 3381 : 2011 | RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE INSIDE RAILBOUND VEHICLES |
EN 61481-2:2014 | Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
EN 60268-5:2003/A1:2009 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
EN 61606-3 : 2008 | AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 3: PROFESSIONAL USE |
EN 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
CEN/TS 16272-7:2015 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 7: Extrinsic characteristics - In situ values of insertion loss |
EN 60349-1:2010 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors |
EN 1793-4:2015 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction |
DIN EN ISO 4869-3:2007-09 | Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007); German version EN ISO 4869-3:2007 |
DIN EN ISO 5136:2009-11 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
DIN EN ISO 11546-2:2010-01 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
DIN EN 54-16:2008-06 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
DIN EN ISO 11546-1:2010-01 | Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
EN 50332-1:2013 | Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment" |
DIN EN ISO 140-11:2005-08 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS |
NF EN ISO 11203 : 2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
EN 60704-2-3:2002/A1:2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-3: PARTICULAR REQUIREMENTS FOR DISHWASHERS |
EN 60349-2:2010 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
UNE-EN ISO 11204:2010 V2 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
I.S. EN ISO 16032:2004 | ACOUSTICS - MEASUREMENT OF SOUND PRESSURE LEVEL FROM SERVICE EQUIPMENT IN BUILDINGS - ENGINEERING METHOD |
UNE-EN ISO 11202:2010 V2 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
UNE-EN ISO 10819:2014 | Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) |
AS 5339:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment |
ISO 266:1997 | Acoustics — Preferred frequencies |
AS 5336:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi - anechoic rooms |
AS 5335:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane |
IEC 60050-801:1994 | International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics |
AS 5333.1:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields Comparison method for a hard-walled test room |
IEC 60801-3:1984 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements |
IEC 60651:1979+AMD1:1993+AMD2:2000 CSV | Sound level meters |
IEC 60801-2:1991 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements |
AS 5332:2019 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards |
IEC 60804:2000 | Integrating-averaging sound level meters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.