EN 60034-1:2010/corrigendum Oct. 2010
Current
Current
The latest, up-to-date edition.
ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
Amendment of
Published date
15-10-2010
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Duty
5 Rating
6 Site operating conditions
7 Electrical operating conditions
8 Thermal performance and tests
9 Other performance and tests
10 Rating plates
11 Miscellaneous requirements
12 Tolerances
13 Electromagnetic compatibility (EMC)
14 Safety
Annex A (informative) - Guidance for the application of duty
type S10 and for establishing the value of relative
thermal life expectancy TL
Annex B (informative) - Electromagnetic compatibility (EMC)
limits
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Annex ZZ (informative) - Coverage of Essential Requirements
of EC Directives
Bibliography
Applies to all rotating electrical machines except those covered by other IEC standards, for example, IEC 60349.
| Committee |
TC 2
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 60034-1 : 2011 | Identical |
| VDE 0530-1 : 2011 | Identical |
| NEN EN IEC 60034-1 : 2010 C11 2010 | Identical |
| UNE-EN 60034-1:2011 | Identical |
| BS EN 60034-1:2010 | Identical |
| SN EN 60034-1 : 2010 | Identical |
| PN EN 60034-1 : 2011 | Identical |
| NF EN 60034-1 : 2011 | Identical |
| CEI EN 60034-1 : 2015 | Identical |
| I.S. EN 60034-1:2010 | Identical |
| NBN EN 60034-1 : 2011 | Identical |
| NBN EN 12514-1 : 2000 | Identical |
| IEEE 303-2004 | IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations |
| CEI EN 60349-4 : 2014 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER |
| BS EN 60349-1:2010 | Electric traction. Rotating electrical machines for rail and road vehicles Machines other than electronic converter-fed alternating current motors |
| DD CLC/TS 50537-2:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Pump for insulating liquid for traction transformers and reactors |
| BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
| 15/30321305 DC : 0 | BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| BS EN 50216-7:2002 | Power transformers and reactor fittings Electric pumps for transformer oil |
| CEI EN 60034-3 : 2011 | ROTATING ELECTRICAL MACHINES - PART 3: SPECIFIC REQUIREMENTS FOR SYNCHRONOUS GENERATORS DRIVEN BY STEAM TURBINES OR COMBUSTION GAS TURBINES |
| BS EN 60034-18-1:2010 | Rotating electrical machines Functional evaluation of insulation systems. General guidelines |
| 07/30166909 DC : DRAFT AUG 2007 | BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| CEI EN 50216-7 : 2002 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 7: ELECTRIC PUMPS FOR TRANSFORMER OIL |
| I.S. EN 60034-5:2001 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| PREN 15194 : DRAFT 2015 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| CEI EN 60034-18-34 : 2013 | ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS |
| CEI EN 60034-18-21 : 2014 | ROTATING ELECTRICAL MACHINES - PART 18-21: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR WIRE-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION |
| EN 61800-9-2:2017 | Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters |
| I.S. EN 60694:1999 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| I.S. EN 60034-30:2009 | ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS |
| CEI EN 60034-29 : 2009 | ROTATING ELECTRICAL MACHINES - PART 29: EQUIVALENT LOADING AND SUPERPOSITION TECHNIQUES - INDIRECT TESTING TO DETERMINE TEMPERATURE RISE |
| CEI CLC/TS 50537-2 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS |
| I.S. EN 60079-15:2010 | EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N' |
| I.S. EN 60034-18-21:2013 | ROTATING ELECTRICAL MACHINES - - PART 18-21: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR WIREWOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION (IEC 60034-18-21:2012 (EQV)) |
| I.S. EN 60034-9:2005 | ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS |
| I.S. EN 15714-2:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| BS EN 50021:1999 | Electrical apparatus for potentially explosive atmospheres. Type of prot ection \'n\' |
| BS EN 60204-11 : 2001 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| NF EN 50216-12 : 2011 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS |
| CEI EN 60034-11 : 2005 | ROTATING ELECTRICAL MACHINES - PART 11: THERMAL PROTECTION |
| S.R. CLC/TS 50537-2:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS |
| S.R. CLC/TS 60034-31:2011 | ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE |
| I.S. EN 60034-11:2004 | ROTATING ELECTRICAL MACHINES - PART 11: THERMAL PROTECTION |
| I.S. EN 60034-2-2:2010 | ROTATING ELECTRICAL MACHINES - PART 2-2: SPECIFIC METHODS FOR DETERMINING SEPARATE LOSSES OF LARGE MACHINES FROM TESTS - SUPPLEMENT TO IEC 60034-2-1 |
| I.S. EN 61241-4:2007 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 4: TYPE OF PROTECTION 'PD' |
| VDE 0160-109-2 : 2018-01 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS (IEC 61800-9-2:2017) |
| NF EN 1175-1 : 1998 + A1 2011 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| EN IEC 60079-7:2015/A1:2018 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017) |
| BS EN 12101-3:2015 | Smoke and heat control systems Specification for powered smoke and heat control ventilators (Fans) |
| 17/30338554 DC : 0 | BS EN 1175 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL/ELECTRONIC REQUIREMENTS |
| 11/30235014 DC : 0 | BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| EN 12101-3:2015 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| EN 61058-1:2002/A2:2008 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| EN 60034-22:2009 | Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| EN 60034-11:2004 | Rotating electrical machines - Part 11: Thermal protection |
| EN 60034-18-32:2010 | Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation by electrical endurance |
| EN 60204-11:2000/corrigendum:2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| EN 60947-4-2:2012 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| EN 60034-2-1:2014 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| EN 60034-9:2005/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS |
| EN 50021 : 99 COR 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N" |
| EN 60034-2-2:2010 | Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 |
| EN 60034-14:2004/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 14: MECHANICAL VIBRATION OF CERTAIN MACHINES WITH SHAFT HEIGHTS 56 MM AND HIGHER - MEASUREMENT, EVALUATION AND LIMITS OF VIBRATION SEVERITY |
| EN 60034-30-1:2014 | Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) |
| EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
| EN 60947-4-1 : 2010 AMD 1 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012) |
| EN 60034-18-34:2012 | Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| EN 60034-8:2007/A1:2014 | ROTATING ELECTRICAL MACHINES - PART 8: TERMINAL MARKINGS AND DIRECTION OF ROTATION (IEC 60034-8:2007/A1:2014) |
| EN 60034-18-1:2010 | Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines |
| EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
| EN 60947-6-2:2003/A1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS) |
| EN 328:2014 | Heat exchangers - Forced convection unit air coolers for refrigeration - Test procedures for establishing the performance |
| EN 12255-1:2002 | Wastewater treatment plants - Part 1: General construction principles |
| EN 50598-1:2014 | Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic model (SAM) |
| CEI EN 60034-28 : 2014 | ROTATING ELECTRICAL MACHINES - PART 28: TEST METHODS FOR DETERMINING QUANTITIES OF EQUIVALENT CIRCUIT DIAGRAMS FOR THREE-PHASE LOW-VOLTAGE CAGE INDUCTION MOTORS |
| DD CLC/TS 60034-18-34:2004 | Rotating electrical machines. Functional evaluation of insulation systems Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems |
| 04/19993045 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN 60034-18-21:2013 | Rotating electrical machines Functional evaluation of insulation systems. Test procedures for wire-wound windings. Thermal evaluation and classification |
| BS EN 60349-4:2013 | Electric traction. Rotating electrical machines for rail and road vehicles Permanent magnet synchronous electrical machines connected to an electronic converter |
| BS EN 61986:2002 | Rotating electrical machines. Equivalent loading and super-position techniques. Indirect testing to determine temperature rise |
| CEI EN 60034-18-32 : 2011 | ROTATING ELECTRICAL MACHINES - PART 18-32: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF ELECTRICAL ENDURANCE |
| BS EN 13135 : 2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| I.S. EN 45510-2-5:2002 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS |
| DD CLC/TS 60034-31:2011 | Rotating electrical machines Selection of energy-efficient motors including variable speed applications. Application guide |
| CLC/TS 50537-2:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for traction transformers and reactors |
| UNI CEI EN 45510-2-5 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS |
| BS EN 60034-18-34:2012 | Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems |
| BS EN 15268:2008 | Petrol filling stations. Safety requirements for the construction of submersible pump assemblies |
| CLC/TS 50537-3:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters |
| BS EN 50016:2002 | Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus \'p\' |
| BS EN 61058-1 : 2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS EN 45510-2-5:2002 | Guide for the procurement of power station equipment. Electrical equipment Motors |
| PREN 50598-1 : DRAFT 2013 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 1: GENERAL REQUIREMENTS FOR SETTING ENERGY EFFICIENCY STANDARDS FOR POWER DRIVEN EQUIPMENT USING THE EXTENDED PRODUCT APPROACH (EPA), AND SEMI ANALYTIC MODEL (SAM) |
| CEI EN 60034-18-1 : 2011 | ROTATING ELECTRICAL MACHINES - PART 18-1: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - GENERAL GUIDELINES |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| I.S. CLC TS 60034-25:2005 | ROTATING ELECTRICAL MACHINES - PART 25: GUIDE FOR THE DESIGN AND PERFORMANCE OF CAGE INDUCTION MOTORS SPECIFICALLY DESIGNED FOR CONVERTER SUPPLY |
| UNI EN 15268 : 2009 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES |
| BS EN 15194:2017 | Cycles. Electrically power assisted cycles. EPAC Bicycles |
| BS EN 50019:2000 | Electrical apparatus for potentially explosive atmospheres. Increased safety \'e\' |
| I.S. EN 60034-18-42:2017 | ROTATING ELECTRICAL MACHINES - PART 18-42: PARTIAL DISCHARGE RESISTANT ELECTRICAL INSULATION SYSTEMS (TYPE 2) USED IN ROTATING ELECTRICAL MACHINES FED FROM VOLTAGE CONVERTERS - QUALIFICATION TESTS |
| PREN 17206 : DRAFT 2018 | ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS) |
| CEI EN 60034-4 : 2009 | ROTATING ELECTRICAL MACHINES - PART 4: METHODS FOR DETERMINING SYNCHRONOUS MACHINE QUANTITIES FROM TESTS |
| CEI EN 60947-4-2 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS |
| CEI EN 61800-9-2 : 1ED 2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| CEI EN 60349-1 : 2012 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| CEI UNI EN 45510-2-6 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-6: ELECTRICAL EQUIPMENT - GENERATORS |
| CLC/TS 60034-20-1:2004 | Rotating electrical machines - Part 20-1: Control motors - Stepping motors |
| I.S. EN 13135:2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| I.S. EN 60034-18-32:2010 | ROTATING ELECTRICAL MACHINES - PART 18-32: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION BY ELECTRICAL ENDURANCE |
| 16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| CLC/TS 60034-31:2011 | Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide |
| DIN EN 61800-9-1 : 2018-01 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-1: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - GENERAL REQUIREMENTS FOR SETTING ENERGY EFFICIENCY STANDARDS FOR POWER DRIVEN EQUIPMENT USING THE EXTENDED PRODUCT APPROACH (EPA) AND SEMI ANALYTIC MODEL (SAM) (IEC 61800-9-1:2017) |
| I.S. EN 60034-8:2007 | ROTATING ELECTRICAL MACHINES - PART 8: TERMINAL MARKINGS AND DIRECTION OF ROTATION |
| CEI EN 60079-15 : 2012 | EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N' |
| EN 61936-1 : 2010 AMD 1 2014 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014) |
| I.S. EN 60204-32:2008 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| I.S. EN 61800-5-1:2007 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY |
| I.S. EN 15268:2008 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES |
| I.S. EN 60034-2-1:2014 | ROTATING ELECTRICAL MACHINES - PART 2-1: STANDARD METHODS FOR DETERMINING LOSSES AND EFFICIENCY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES) |
| S.R. CWA 15902-1:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS) |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 12101-3:2015-12 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| DIN EN 327:2014-11 | HEAT EXCHANGERS - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS - TEST PROCEDURES FOR ESTABLISHING PERFORMANCE |
| UNE-EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| UNE-EN 12101-3:2016 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| BS EN 1175-1 : 1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| I.S. EN 327:2014 | HEAT EXCHANGERS - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS - TEST PROCEDURE FOR ESTABLISHING PERFORMANCE |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN 328:2014 | HEAT EXCHANGERS - FORCED CONVECTION UNIT AIR COOLERS FOR REFRIGERATION - TEST PROCEDURES FOR ESTABLISHING THE PERFORMANCE |
| I.S. EN 12101-3:2015 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| EN 50216-7:2002 | Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil |
| EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| I.S. EN 809:1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| I.S. EN 14986:2017 | DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| I.S. EN 1175-1:1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| EN 61800-5-1:2007/A1:2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY (IEC 61800-5-1:2007/A1:2016) |
| CEI EN 61800-1 : 2000 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS |
| KTA 3702 : 2014(R2017) | EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
| KTA 3504 : 2015(R2017) | |
| UNE-EN 60349-4:2013 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
| CEI CLC/TS 50537-3 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
| I.S. EN 1151-1:2006 | PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 1: NON-AUTOMATIC CIRCULATION PUMPS, REQUIREMENTS, TESTING, MARKING |
| BS EN 60034-2-1:2014 | Rotating electrical machines Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| UNI EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| 04/30122476 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| I.S. EN 60349-1:2010 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS |
| BS EN 60034-28:2013 | Rotating electrical machines Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors |
| 16/30342855 DC : 0 | BS EN 17038-2 - PUMPS - METHODS OF QUALIFICATION AND VERIFICATION OF THE ENERGY EFFICIENCY INDEX FOR ROTODYNAMIC PUMP UNITS - PART 2: TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) OF SINGLE PUMP UNITS |
| BS EN 60034-29:2008 | Rotating electrical machines Equivalent loading and superposition techniques. Indirect testing to determine temperature rise |
| BS EN 60034-22:2009 | Rotating electrical machines AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
| BS EN 60947-4-2:2012 | Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor motor controllers and starters |
| PREN 14492-1 : DRAFT 2015 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN 15714-2:2009 | Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements |
| 13/30252783 DC : 0 | BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| BS EN 50281-1-1:1999 | Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing |
| 13/30280184 DC : 0 | BS EN 50598-1 - ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 1: GENERAL REQUIREMENTS FOR SETTING ENERGY EFFICIENCY STANDARDS FOR POWER DRIVEN EQUIPMENT USING THE EXTENDED PRODUCT APPROACH (EPA), AND SEMI ANALYTIC MODEL (SAM) |
| BS EN 61800-9-2:2017 | Adjustable speed electrical power drive systems Ecodesign for power drive systems, motor starters, power electronics and their driven applications. Energy efficiency indicators for power drive systems and motor starters |
| BS EN 60034-30-1:2014 | Rotating electrical machines Efficiency classes of line operated AC motors (IE code) |
| I.S. EN 60034-22:2009 | ROTATING ELECTRICAL MACHINES - PART 22: AC GENERATORS FOR RECIPROCATING INTERNAL COMBUSTION (RIC) ENGINE DRIVEN GENERATING SETS |
| I.S. EN 60349-4:2013 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER (IEC 60349-4:2012 (EQV)) |
| CEI EN 60349-2 : 2012 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| I.S. EN 60079-7:2015 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' |
| I.S. EN 61058-1:2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| CEI EN 60034-18-42 : 1ED 2017 | ROTATING ELECTRICAL MACHINES - PART 18-42: PARTIAL DISCHARGE RESISTANT ELECTRICAL INSULATION SYSTEMS (TYPE 2) USED IN ROTATING ELECTRICAL MACHINES FED FROM VOLTAGE CONVERTERS - QUALIFICATION TESTS |
| OVE/ONORM EN 60034-3 : 2009 | ROTATING ELECTRICAL MACHINES - PART 3: SPECIFIC REQUIREMENTS FOR SYNCHRONOUS GENERATORS DRIVEN BY STEAM TURBINES OR COMBUSTION GAS TURBINES |
| BS EN 60034-8 : 2007 | ROTATING ELECTRICAL MACHINES - PART 8: TERMINAL MARKINGS AND DIRECTION OF ROTATION |
| UNE-EN 50598-1:2015 | Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic model (SAM) |
| VDE 0160-109-1 : 2018-01 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-1: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - GENERAL REQUIREMENTS FOR SETTING ENERGY EFFICIENCY STANDARDS FOR POWER DRIVEN EQUIPMENT USING THE EXTENDED PRODUCT APPROACH (EPA) AND SEMI ANALYTIC MODEL (SAM) |
| BS EN 60079-15:2010 | Explosive atmospheres Equipment protection by type of protection \'n\' |
| EN 60034-18-42:2017 | Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests |
| UNE-EN 13135:2013 | Cranes - Safety - Design - Requirements for equipment |
| I.S. EN 15194:2017 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| I.S. EN 60204-1:2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60204-11:2000 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| I.S. EN 50216-7:2002 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 7: ELECTRIC PUMPS FOR TRANSFORMER OIL |
| UNE-EN 60349-2:2011 | Electric traction - Rotating electrical machines for rail and road vehicles -- Part 2: Electronic converter-fed alternating current motors |
| UNE-EN 60079-14:2016 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| UNE-EN 60947-4-1:2011 | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| BS EN 61800-5-1:2007 | Adjustable speed electrical power drive systems Safety requirements. Electrical, thermal and energy |
| BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
| EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| EN 60034-3:2008 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| UNE-EN 60204-1:2007 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 50016:2002 | Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p" |
| UNI EN 1175-1 : 2010 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| EN 45510-2-6:2000 | Guide for procurement of power station equipment - Part 2-6: Electrical equipment - Generators |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 50281-1-1 : 98 AMD 1 2002 | ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING |
| BS EN 60694:1997 | Common specifications for high-voltage switchgear and controlgear standards |
| DIN EN 61800-9-2 : 2018-01 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS (IEC 61800-9-2:2017) |
| BS EN 60034-30:2009 | Rotating electrical machines Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| CEI EN 60034-30-1 : 2015 | ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) |
| CEI EN 60027-4 : 2008 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 4: ROTATING ELECTRICAL MACHINES |
| EN 15714-2:2009 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| BS EN 50216-12:2011 | Power transformer and reactor fittings Fans |
| PREN 1175 : DRAFT 2017 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL/ELECTRONIC REQUIREMENTS |
| EN 13135:2013+A1:2018 | Cranes - Safety - Design - Requirements for equipment |
| BS EN 60034-19:2014 | Rotating electrical machines Specific test methods for d.c. machines on conventional and rectifier-fed supplies |
| BS EN 60034-11:2004 | Rotating electrical machines Thermal protection |
| CEI EN 60034-30 : 2011 | ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE CODE) |
| UNI EN 15714-2 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 17/30358367 DC : 0 | BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS |
| 13/30280187 DC : 0 | BS EN 50598-2 - ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| BS EN 60034-18-32:2010 | Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation by electrical endurance |
| BS EN 60034-18-42:2017 | Rotating electrical machines Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests |
| BS EN 60034-5:2001 | Rotating electrical machines Degrees of protection provided by the integral design of rotating electrical machines (IP code). Classification |
| CEI UNI EN 45510-2-5 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS |
| PREN 17038-3 : DRAFT 2017 | PUMPS - ROTODYNAMIC PUMPS - ENERGY EFFICIENCY INDEX - METHODS OF QUALIFICATION AND VERIFICATION - PART 3: TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) OF BOOSTER SETS |
| DD CLC/TS 60034-20-1:2004 | Rotating electrical machines. Control motors Stepping motors |
| BS EN 60034-2-2:2010 | Rotating electrical machines Specific methods for determining separate losses of large machines from tests. Supplement to IEC 60034-2-1 |
| DIN EN 15268:2008-11 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP |
| I.S. EN 50598-1:2014 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 1: GENERAL REQUIREMENTS FOR SETTING ENERGY EFFICIENCY STANDARDS FOR POWER DRIVEN EQUIPMENT USING THE EXTENDED PRODUCT APPROACH (EPA), AND SEMI ANALYTIC MODEL (SAM) |
| PREN 50502 : DRAFT 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| DIN EN 50021 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N" |
| I.S. EN 60034-30-1:2014 | ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) |
| CLC/TS 60034-18-34:2004 | Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| PREN 50598-2 : DRAFT 2013 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| I.S. EN 60034-18-34:2012 | ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS (IEC 60034-18-34:2012 (EQV)) |
| S.R. CLC/TS 60034-25:2008 | ROTATING ELECTRICAL MACHINES - PART 25: GUIDANCE FOR THE DESIGN AND PERFORMANCE OF A.C. MOTORS SPECIFICALLY DESIGNED FOR CONVERTER SUPPLY |
| I.S. EN 60034-3:2008 | ROTATING ELECTRICAL MACHINES - PART 3: SPECIFIC REQUIREMENTS FOR SYNCHRONOUS GENERATORS DRIVEN BY STEAM TURBINES OR COMBUSTION GAS TURBINES |
| I.S. EN 60034-28:2013 | ROTATING ELECTRICAL MACHINES - PART 28: TEST METHODS FOR DETERMINING QUANTITIES OF EQUIVALENT CIRCUIT DIAGRAMS FOR THREE-PHASE LOW-VOLTAGE CAGE INDUCTION MOTORS (IEC 60034-28:2012 (EQV)) |
| I.S. EN 60349-2:2010 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| CEI EN 60034-22 : 2011 | ROTATING ELECTRICAL MACHINES - PART 22: AC GENERATORS FOR RECIPROCATING INTERNAL COMBUSTION (RIC) ENGINE DRIVEN GENERATING SETS |
| 17/30367208 DC : 0 | BS EN 17038-3 - PUMPS - ROTODYNAMIC PUMPS - ENERGY EFFICIENCY INDEX - METHODS OF QUALIFICATION AND VERIFICATION - PART 3: TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) OF BOOSTER SETS |
| DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| I.S. EN 61936-1:2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| DIN EN 13135:2013-05 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| I.S. EN 60027-4:2007 | LETTER SYMBOLS TO BE USED IN ELECTRIC TECHNOLOGY - PART 4: ROTATING ELECTRIC MACHINES |
| I.S. EN 60034-18-1:2010 | ROTATING ELECTRICAL MACHINES - PART 18-1: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - GENERAL GUIDELINES |
| I.S. EN 50016:2002 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PRESSURIZED APPARATUS "P" |
| DIN EN 328:2014-11 | HEAT EXCHANGERS - FORCED CONVECTION UNIT AIR COOLERS FOR REFRIGERATION - TEST PROCEDURES FOR ESTABLISHING THE PERFORMANCE |
| BS EN 14986:2007 | Design of fans working in potentially explosive atmospheres |
| UNE-EN 1175-1:1998 | SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS. |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| UNE-EN 328:2015 | Heat exchangers - Forced convection unit air coolers for refrigeration - Test procedures for establishing the performance |
| UNE-EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| UNE-EN 327:2015 | Heat exchangers - Forced convection air cooled refrigerant condensers - Test procedures for establishing performance |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN 12255-1:2002 | Wastewater treatment plants General construction principles |
| BS EN 61936-1 : 2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES |
| UNE-EN 60349-1:2011 | Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic converter-fed alternating current motors |
| UNE-EN 61936-1:2012 | Power installations exceeding 1 kV a.c. -- Part 1: Common rules |
| 12/30260546 DC : 0 | BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| BS EN 1151-1:2006 | Pumps. Rotodynamic pumps. Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations Non-automatic circulation pumps, requirements, testing, marking |
| EN 60034-4:2008 | Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests |
| EN 60027-4:2007 | Letter symbols to be used in electrical technology - Part 4: Rotating electrical machines |
| EN 327:2014 | Heat exchangers - Forced convection air cooled refrigerant condensers - Test procedures for establishing performance |
| EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| EN 15268:2008 | Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
| EN 45510-2-5:2002 | Guide for procurement of power station equipment - Part 2-5: Electrical equipment - Motors |
| EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles |
| BS EN 60947-4-1 : 2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| UNE-EN 60079-15:2013 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| PREN 12693 : DRAFT 1996 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS |
| BS EN 60947-6-2:2003 | Low-voltage switchgear and controlgear Multiple function equipment. Control and protective switching devices (or equipment) (CPS) |
| BS EN 50598-2 : 2014 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| BS EN 60079-7 : 2015 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015) |
| BS EN 61800-4:2003 | Adjustable speed electrical power drive systems General requirements. Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV |
| I.S. EN 60034-29:2008 | ROTATING ELECTRICAL MACHINES - PART 29: EQUIVALENT LOADING AND SUPERPOSITION TECHNIQUES - INDIRECT TESTING TO DETERMINE TEMPERATURE RISE |
| 18/30366946 DC : 0 | BS EN 17206 - ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS) |
| DD CLC/TS 50537-3:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Water pump for traction converters |
| 09/30205068 DC : 0 | BS EN 1151-1 - PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 1: GENERAL REQUIREMENTS, TESTING, MARKING |
| BS EN 60349-2:2010 | Electrical traction. Rotating electrical machines for rail and road vehicles Electronic converter-fed alternating current motors |
| BS EN 61241-4:2006 | Electrical apparatus for use in the presence of combustible dust Type of protection \'pD\' |
| BS EN 50598-1:2014 | Ecodesign for power drive systems, motor starters, power electronics & their driven applications General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic model (SAM) |
| OVE/ONORM EN 60034-5 : 2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| UNE-EN 60034-28:2013 | Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors |
| BS EN 45510-2-6:2000 | Guide for the procurement of power station equipment Electrical equipment - Generators |
| BS EN 60027-4:2007 | Letter symbols to be used in electric technology Rotating electric machines |
| BS EN 60034-4:2008 | Rotating electrical machines Methods for determining synchronous machine quantities from tests |
| UNE-EN 60027-4:2011 | Letter symbols to be used in electrical technology -- Part 4: Rotating electric machines |
| BS EN 60034-3:2008 | Rotating electrical machines Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| 97/700630 DC : DRAFT JAN 1997 | PREN 12693 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS |
| BS EN 60034-14:2004 | Rotating electrical machines Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration severity |
| I.S. EN 60079-14:2014 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION |
| UNE-EN 50598-2:2015 | Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor starters |
| BS EN 60034-9:2005 | Rotating electrical machines Noise limits |
| UNE-EN 15714-2:2010 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| CEI EN 60034-2-2 : 2011 | ROTATING ELECTRICAL MACHINES - PART 2-2: SPECIFIC METHODS FOR DETERMINING SEPARATE LOSSES OF LARGE MACHINES FROM TESTS - SUPPLEMENT TO IEC 60034-2-1 |
| DIN EN 15714-2:2010-02 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| I.S. EN 61800-9-2:2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| I.S. EN 60947-6-2:2003 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS) |
| I.S. EN 60947-4-2:2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS |
| I.S. EN 60034-14:2004 | ROTATING ELECTRICAL MACHINES - PART 14: MECHANICAL VIBRATION OF CERTAIN MACHINES WITH SHAFT HEIGHTS 56 MM AND HIGHER - MEASUREMENT, EVALUATION AND LIMITS OF VIBRATION SEVERITY |
| I.S. EN 50598-2:2014 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| I.S. EN 60947-4-1:2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009 (EQV)) |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| I.S. EN 60034-19:2014 | ROTATING ELECTRICAL MACHINES - PART 19: SPECIFIC TEST METHODS FOR D.C. MACHINES ON CONVENTIONAL AND RECTIFIER-FED SUPPLIES |
| UNE-EN 60079-7:2016 | Explosive atmospheres - Part 7: Equipment protection by increased safety "e" |
| UNE-EN 60034-22:2010 | Rotating electrical machines -- Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
| CEI EN 61800-4 : 2003 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A/C/ POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV |
| I.S. EN 50216-12:2011 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS |
| I.S. EN 60034-4:2008 | ROTATING ELECTRICAL MACHINES - PART 4: METHODS FOR DETERMINING SYNCHRONOUS MACHINE QUANTITIES FROM TESTS |
| S.R. CLC/TS 50537-3:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
| I.S. EN 50019:2001 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E" |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| I.S. EN 61800-4:2003 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A.C. POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| BS EN 328:2014 | Heat exchangers. Forced convection unit air coolers for refrigeration. Test procedures for establishing the performance |
| BS EN 327:2014 | Heat exchangers. Forced convection air cooled refrigerant condensers. Test procedures for establishing performance |
| BS EN 60204-1 : 2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| BS EN 60204-32:2008 | Safety of machinery. Electrical equipment of machines Requirements for hoisting machines |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 1151-1:2006-11 | PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 1: NON-AUTOMATIC CIRCULATION PUMPS, REQUIREMENTS, TESTING, MARKING |
| EN 60349-4:2013 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
| EN 60034-19:2014 | Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies |
| EN 60034-28:2013 | Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors |
| EN 61800-4:2003 | Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 60349-1:2010 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors |
| EN 50019:2000/corrigendum Apr. 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E" |
| EN 50598-2:2014/A1:2016 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| EN 61986:2002 | Rotating electrical machines - Equivalent loading and super-position techniques - Indirect testing to determine temperature rise |
| CLC/TS 60034-25:2008 | Rotating electrical machines - Part 25: Guidance for the design and performance of a.c. motors specifically designed for converter supply |
| EN 60034-30:2009 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| EN 60034-29:2008 | Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise |
| EN 60034-18-21:2013 | Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification |
| EN 61241-4:2006 | Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD" |
| EN 60349-2:2010 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| I.S. EN 12255-1:2002 | WASTEWATER TREATMENT PLANTS - PART 1: GENERAL CONSTRUCTION PRINCIPLES |
| IEC 60038:2009 | IEC standard voltages |
| EN 60034-30:2009 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| 2006/95/EC : 2006 | DIRECTIVE 2006/1995/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 12 DECEMBER 2006 ON THE HARMONISATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS (CODIFIED VERSION) (TEXT WITH EEA RELEVANCE) |
| IEC 60034-9:2003+AMD1:2007 CSV | Rotating electrical machines - Part 9: Noise limits |
| IEC 60050-811:1991 | International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction |
| EN 60085:2008 | Electrical insulation - Thermal evaluation and designation |
| IEC 60034-29:2008 | Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise |
| IEC 61293:1994 | Marking of electrical equipment with ratings related to electrical supply - Safety requirements |
| IEC 60050-411:1996 | International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
| 2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
| EN 60027-1:2006/A2:2007 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL |
| EN 60034-3:2008 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| IEC 60034-3:2007 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| EN 60034-12:2017 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors |
| IEC 60027-1:1992 | Letters symbols to be used in electrical technology - Part 1: General |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| EN 60034-15:2009 | Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines |
| IEC 60034-8:2007+AMD1:2014 CSV | Rotating electrical machines - Part 8: Terminal markings anddirection of rotation |
| EN 60034-8:2007/A1:2014 | ROTATING ELECTRICAL MACHINES - PART 8: TERMINAL MARKINGS AND DIRECTION OF ROTATION (IEC 60034-8:2007/A1:2014) |
| IEC TS 60034-17:2006 | Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide |
| IEC 60034-14:2003+AMD1:2007 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| EN 60027-4:2007 | Letter symbols to be used in electrical technology - Part 4: Rotating electrical machines |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 60204-11:2000/corrigendum:2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| IEC 60034-12:2016 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors |
| CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 60027-4:2006 | Letter symbols to be used in electrical technology - Part 4: Rotating electric machines |
| EN 61293:1994 | Marking of electrical equipment with ratings related to electrical supply - Safety requirements |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 60034-30:2008 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.