I.S. EN ISO 14224:2016
Current
Current
The latest, up-to-date edition.
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
Published date
01-01-2016
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Sorry this product is not available in your region.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Application
6 Benefits of RM data collection
and exchange
7 Quality of data
8 Equipment boundary, taxonomy and
time definitions
9 Recommended data for equipment, failures
and maintenance
Annex A (informative) - Equipment-class attributes
Annex B (normative) - Interpretation and notation
of failure and maintenance parameters
Annex C (informative) - Guide to interpretation and
calculation of derived reliability and maintenance
parameters
Annex D (informative) - Typical requirements for data
Annex E (informative) - Key performance indicators
(KPIs) and benchmarking
Annex F (informative) - Classification and definition
of safety critical failures
Bibliography
Gives a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment.
| DocumentType |
Standard
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 14224:2015-08 (Draft) | Identical |
| BS EN ISO 14224:2016 | Identical |
| NBN EN ISO 14224 : 2007 | Identical |
| ISO 14224:2016 | Identical |
| NEN EN ISO 14224 : OCT 2016 | Identical |
| SN EN ISO 14224 : 2016 | Identical |
| NF EN ISO 14224 : 2017 | Identical |
| NS EN ISO 14224 : 2016 | Identical |
| UNI EN ISO 14224 : 2007 | Identical |
| EN ISO 14224:2016 | Identical |
| ISO 15663-3:2001 | Petroleum and natural gas industries Life-cycle costing Part 3: Implementation guidelines |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| ISO 15551-1:2015 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift |
| API 12F : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV | High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
| API SPEC 12D : 2017 | SPECIFICATION FOR FIELD-WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| IEC 61800-3:2017 | Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
| ISO 13707:2000 | Petroleum and natural gas industries Reciprocating compressors |
| IEC 62551:2012 | Analysis techniques for dependability - Petri net techniques |
| BS 4999-140:1987 | General requirements for rotating electrical machines Specification for voltage regulation and parallel operation of a.c. synchronous generators |
| ISO 15663-2:2001 | Petroleum and natural gas industries Life-cycle costing Part 2: Guidance on application of methodology and calculation methods |
| IEC 60038:2009 | IEC standard voltages |
| IEEE 1566-2015 | IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger |
| IEC 60076-7:2005 | Power transformers - Part 7: Loading guide for oil-immersed power transformers |
| ISO 15663-1:2000 | Petroleum and natural gas industries Life cycle costing Part 1: Methodology |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| IEEE C37.102-2006 REDLINE | IEEE Guide for AC Generator Protection |
| IEC 61800-2:2015 | Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems |
| IEC 61800-4:2002 | Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV |
| ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
| IEEE 1202-2006 | IEEE Standard for Flame-Propagation Testing of Wire & Cable |
| IEEE C37.13.1-2006 | IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| API 617 DATA SHEET : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| API 560 : 2016 | FIRED HEATERS FOR GENERAL REFINERY SERVICE |
| IEC 61123:1991 | Reliability testing - Compliance test plans for success ratio |
| C88-16 | Power transformers and reactors |
| IEC 62271-200:2011 | High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| ISO 19900:2013 | Petroleum and natural gas industries General requirements for offshore structures |
| ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| ISO 16708:2006 | Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods |
| API 661 : 2015 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
| ISO 13624-1:2009 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Design and operation of marine drilling riser equipment |
| ISO 16904:2016 | Petroleum and natural gas industries Design and testing of LNG marine transfer arms for conventional onshore terminals |
| IEC 60605-4:2001 | Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals |
| API 616 : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| SAE JA1012_201108 | A Guide to the Reliability-Centered Maintenance (RCM) Standard |
| ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
| ISO 15547-1:2005 | Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers |
| ISO 15138:2007 | Petroleum and natural gas industries Offshore production installations Heating, ventilation and air-conditioning |
| IEC 62740:2015 | Root cause analysis (RCA) |
| SAE JA1011_200908 | Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes |
| IEC 60502:1994 | Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV |
| ISO 8528-8:2016 | Reciprocating internal combustion engine driven alternating current generating sets — Part 8: Requirements and tests for low-power generating sets |
| API 17F : 2014 | SUBSEA PRODUCTION CONTROL SYSTEMS |
| ISO 8528-3:2005 | Reciprocating internal combustion engine driven alternating current generating sets Part 3: Alternating current generators for generating sets |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| ISO 8528-2:2005 | Reciprocating internal combustion engine driven alternating current generating sets Part 2: Engines |
| IEC 60319:1999 | Presentation and specification of reliability data for electronic components |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| UL 1072:4ED 2006-06-30 | Medium-Voltage Power Cables |
| API 611 DATA SHEET : 0 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 5CT : 2012 | CASING AND TUBING |
| IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| ICEA S 93 639 : 2012 | 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY |
| NEMA PE 7 : 1997(R2003) | COMMUNICATIONS TYPE BATTERY CHARGERS |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| IEC 60300-3-3:2017 | Dependability management - Part 3-3: Application guide - Life cycle costing |
| ISO 13631:2002 | Petroleum and natural gas industries Packaged reciprocating gas compressors |
| IEC 61649:2008 | Weibull analysis |
| API 560 DATA SHEET : 0 | FIRED HEATERS FOR GENERAL REFINERY SERVICE |
| IEC 60300-3-12:2011 | Dependability management - Part 3-12: Application guide - Integrated logistic support |
| API 612 DATA SHEET : 2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
| ISO 13628-15:2011 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds |
| ISO 16812:2007 | Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers |
| ISO 10437:2003 | Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications |
| API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
| IEC 60300-3-14:2004 | Dependability management - Part 3-14: Application guide - Maintenance and maintenance support |
| IEC 60300-3-4:2007 | Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements |
| ISO 8528-6:2005 | Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods |
| ISO 15547-2:2005 | Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers |
| IEC 60605-6:2007 | Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| ISO 10439-3:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 3: Integrally geared centrifugal compressors |
| IMO IE110 : 2009 | SOLAS (CONSOLIDATED EDITION) |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ISO 13679:2002 | Petroleum and natural gas industries Procedures for testing casing and tubing connections |
| API 609 : 2016 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
| IEC 60706-3:2006 | Maintainability of equipment - Part 3: Verification and collection, analysis and presentation of data |
| IEC/ISO 31010:2009 | Risk management - Risk assessment techniques |
| ISO 31000:2009 | Risk management Principles and guidelines |
| ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
| ISO 19901-7:2013 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units |
| IEC 61070:1991 | Compliance test procedures for steady-state availability |
| API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| ISO 8528-5:2013 | Reciprocating internal combustion engine driven alternating current generating sets Part 5: Generating sets |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| IEC 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
| IEC 61078:2016 | Reliability block diagrams |
| ASME B31.3:2016 | PROCESS PIPING |
| API 662 : 2006 | PLATE HEAT EXCHANGERS FOR GENERAL REFINERY SERVICES |
| IEC 60076-5:2006 | Power transformers - Part 5: Ability to withstand short circuit |
| IEC 61165:2006 | Application of Markov techniques |
| ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
| IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
| IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
| ISO 8528-4:2005 | Reciprocating internal combustion engine driven alternating current generating sets — Part 4: Controlgear and switchgear |
| ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
| IEC 60470:1999 | High-voltage alternating current contactors and contactor-based motor-starters |
| API 650 DATA SHEET : 2013 | WELDED TANKS FOR OIL STORAGE |
| ISO 8528-12:1997 | Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supply to safety services |
| ISO 17776:2016 | Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations |
| ISO 15544:2000 | Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response |
| API 610 DATA SHEET : 2010 | Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries – Mechanical Equipment Data Sheet – |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| IEC 61163-1:2006 | Reliability stress screening - Part 1: Repairable assemblies manufactured in lots |
| ISO 19008:2016 | Standard cost coding system for oil and gas production and processing facilities |
| ISO 10418:2003 | Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems |
| API 541 DATASHEET:2004 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| ISO 8528-10:1998 | Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise by the enveloping surface method |
| ISO 12211:2012 | Petroleum, petrochemical and natural gas industries — Spiral plate heat exchangers |
| API 554-1 : 2008(R2016) | PROCESS CONTROL SYSTEMS - PART 1: PROCESS CONTROL SYSTEMS FUNCTIONS AND FUNCTIONAL SPECIFICATION DEVELOPMENT |
| IEC 60076-4:1976 | Power transformers - Part 4: Tappings and connections |
| NEMA VE 2 : 2013 | CABLE TRAY INSTALLATION GUIDELINES |
| ISO 10417:2004 | Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress |
| API 580 : 2016 | RISK-BASED INSPECTION |
| ISO 13354:2014 | Petroleum and natural gas industries Drilling and production equipment Shallow gas diverter equipment |
| IEC 60076-8:1997 | Power transformers - Part 8: Application guide |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| IEC 60076-12:2008 | Power transformers - Part 12: Loading guide for dry-type power transformers |
| IEC 61810-2:2017 | Electromechanical elementary relays - Part 2: Reliability |
| ISO/PAS 12835:2013 | Qualification of casing connections for thermal wells |
| ISO 28460:2010 | Petroleum and natural gas industries Installation and equipment for liquefied natural gas Ship-to-shore interface and port operations |
| IEC 62040-2:2016 | Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements |
| API 676 DATA SHEET : 0 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| API 619 DATA SHEET : 2013 | ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES |
| IEC 60300-3-2:2004 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| ISO 2314:2009 | Gas turbines — Acceptance tests |
| IEC 61124:2012 | Reliability testing - Compliance tests for constant failure rate and constant failure intensity |
| IEC 61511-3:2016 | Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| NEMA VE 1:2017 | Metal Cable Tray Systems |
| ISO 10439-2:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 2: Non-integrally geared centrifugal and axial compressors |
| IEC 60146-1-1:2009 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| IEC 62114:2001 | Electrical Insulation Systems - Thermal classification |
| BS 4778-3.1:1991 | Quality vocabulary. Availability, reliability and maintainability terms Guide to concepts and related definitions |
| API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| IEC 60076-3:2013 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
| ISO 12212:2012 | Petroleum, petrochemical and natural gas industries — Hairpin-type heat exchangers |
| IEC 60300-3-1:2003 | Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
| IEC 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
| API 674 DATA SHEET : 2010 | POSITIVE DISPLACEMENT PUMPS – RECIPROCATING – Mechanical Equipment Data Sheet – C6740D |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| API 660 : 2015 | SHELL-AND-TUBE HEAT EXCHANGERS |
| IEC 61164:2004 | Reliability growth - Statistical test and estimation methods |
| IEC 61703:2016 | Mathematical expressions for reliability, availability, maintainability and maintenance support terms |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| ISO 8528-9:2017 | Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations |
| IEC 61709:2017 | Electric components - Reliability - Reference conditions for failure rates and stress models for conversion |
| ISO 14310:2008 | Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
| IEC 60300-1:2014 | Dependability management - Part 1: Guidance for management and application |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| OLF 070 : 2004 | |
| IEC 61511-2:2016 | Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016 |
| IEC 60300-3-11:2009 | Dependability management - Part 3-11: Application guide - Reliability centred maintenance |
| API 660 DATA SHEET : 2007 | SHELL-AND-TUBE HEAT EXCHANGERS |
| API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ISO 25457:2008 | Petroleum, petrochemical and natural gas industries — Flare details for general refinery and petrochemical service |
| CSA C68.3 : 1997 | |
| IEC 60706-2:2006 | Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase |
| API 661 DATA SHEET : 0 | AIR-COOLED HEAT EXCHANGERS FOR GENERAL REFINERY SERVICE |
| NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
| ISO 13703:2000 | Petroleum and natural gas industries Design and installation of piping systems on offshore production platforms |
| IEC 60300-2:2004 | Dependability management - Part 2: Guidelines for dependability management |
| ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
| IEEE C37.012-2014 | IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V |
| API 526 : 2017 | FLANGED STEEL PRESSURE-RELIEF VALVES |
| ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| IEEE C37.20.7-2007 REDLINE | IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults |
| IEC 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| API 612 : 2014 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| IEC 62508:2010 | Guidance on human aspects of dependability |
| ISO 8528-7:2017 | Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| ISO 8528-1:2005 | Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance |
| IEC 61000-4-7:2002+AMD1:2008 CSV | Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
| IEC 60300-3-10:2001 | Dependability management - Part 3-10: Application guide - Maintainability |
| IEC 60034-12:2016 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors |
| API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| IEC 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
| API 537 DATASHEET:2008 | FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
| ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
| API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| IEC 60706-5:2007 | Maintainability of equipment - Part 5: Testability and diagnostic testing |
| ISO 13706:2011 | Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers |
| ISO/TR 12489:2013 | Petroleum, petrochemical and natural gas industries Reliability modelling and calculation of safety systems |
| IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
| UL 2250:3ED 2017-03-30 | Instrumentation Tray Cable |
| API 618 DATA SHEET : 0 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| IEC 60050-444:2002 | International Electrotechnical Vocabulary (IEV) - Part 444: Elementary relays |
| IEC 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| ISO 20815:2008 | Petroleum, petrochemical and natural gas industries Production assurance and reliability management |
| IEC 60381-2:1978 | Analogue signals for process control systems. Part 2: Direct voltage signals |
| ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| IEC TR 61508-0:2005 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 (see Functional Safety and IEC 61508) |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| MIL-STD-1629 Revision A:1980 | PROCEDURES FOR PERFORMING A FAILURE MODE, EFFECTS AND CRITICALITY ANALYSIS |
| API 594 : 2017 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
| IEC 61650:1997 | Reliability data analysis techniques - Procedures for comparison of two constant failure rates and two constant failure (event) intensities |
| API 616 DATA SHEET : 2011 | GAS TURBINES FOR THE PETROLEUM CHEMICAL, AND GAS INDUSTRY SERVICES |
| NFPA 16 : 2015 | INSTALLATION OF FOAM-WATER SPRINKLER AND FOAM-WATER SPRAY SYSTEMS |
| ISO 10439-4:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 4: Expander-compressors |
| API 537 : 2017 | FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES |
| IEEE C57.12.10-2010 REDLINE | IEEE Standard Requirements for Liquid-Immersed Power Transformers |
| IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
| ISO 13628-5:2009 | Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals |
| API 547 : 2017 | GENERAL PURPOSE FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 185 KW (250 HP) THROUGH 2240 KW (3000 HP) |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| ISO 14723:2009 | Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves |
| API 53 : 2012 | BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
| ISO 28300:2008 | Petroleum, petrochemical and natural gas industries — Venting of atmospheric and low-pressure storage tanks |
| API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
| API 17H : 2013 | REMOTELY OPERATED TOOLS AND INTERFACES ON SUBSEA PRODUCTION SYSTEMS |
| NEMA PE 5:1997(R2003) | Utility-Type Battery Chargers |
| API 19G2 : 2010 | FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 662 DATA SHEET : 0 | PLATE HEAT EXCHANGERS FOR GENERAL REFINERY SERVICES |
| IEEE C37.101-2006 REDLINE | IEEE Guide for Generator Ground Protection |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| IEC 61800-1:1997 | Adjustable speed electrical power drive systems - Part 1: General requirments - Rating specifications for low voltage adjustables speed d.c. power drive systems |
| IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV | High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches |
| IEC 60300-3-5:2001 | Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| ISO 5208:2015 | Industrial valves Pressure testing of metallic valves |
| API SPEC 12P : 2016 | SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC TANKS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.