IEC 60068-2-47:2005
Current
Current
The latest, up-to-date edition.
Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French, Spanish, Castilian
Published date
13-04-2005
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Mounting, where the specimen is a component
6 Mounting, where the specimen is equipment and other articles
7 Mounting, where the specimen is a packaged product
7.1 Packaging available
7.2 Product normally packaged but packaging not available
8 Information to be given in the relevant specification
Annex A (informative) General guidance
Annex B (informative) Guidance on packaged products
Annex C (informative) Response of a single degree of freedom
(SDOF) system to a half-sine shock pulse
Bibliography
Provides methods for mounting products, whether packaged or unpackaged, as well as mounting requirements for equipment and other articles, for the series of dynamic tests in IEC 60068-2, that is impact (Test E), vibration (Test F) and acceleration, steady-state (Test G). When they are fastened to the test apparatus and subjected to these tests, whether packaged or unpackaged, they are referred to as specimens. The major technical changes with regard to the second edition are related to specific guidance on the testing of packaged products.
| DevelopmentNote |
Stability Date: 2019. (07/2015)
|
| DocumentType |
Standard
|
| Pages |
69
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS C 60068-2-47:2008 | Identical |
| NF EN 60068-2-47 : 2005 | Identical |
| NBN EN 60068 2-47 : 2005 | Identical |
| NEN EN IEC 60068-2-47 : 2005 | Identical |
| I.S. EN 60068-2-47:2005 | Identical |
| PN EN 60068-2-47 : 2005 | Identical |
| BS EN 60068-2-47:2005 | Identical |
| EN 60068-2-47:2005 | Identical |
| AS 60068.2.47-2003 | Identical |
| UNE 20501-2-47:1985 | Identical |
| CEI EN 60068-2-47 : 2006 | Identical |
| UNE-EN 60068-2-47:2006 | Identical |
| DIN IEC 60068-2-47:1985-06 | Identical |
| BS EN 50289-3-5:2001 | Identical |
| DIN EN 60068-2-47:2006-03 | Identical |
| NEN 10068-2-47 : 1994 | Identical |
| BS 2011-4.1:1983 | Identical |
| NFC 20 747 : 1987 | Identical |
| ISO 14708-1:2014 | Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
| BS EN 16451:2015 | Railway applications. Braking. Brake pad holder |
| BS ISO 12405-1:2011 | Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems High-power applications |
| 09/30180346 DC : 0 | BS ISO 12405-1 - ELECTRICALLY PROPELLED ROAD VEHICLES - TEST SPECIFICATION FOR LITHIUM-ION TRACTION BATTERY SYSTEMS - PART 1: HIGH POWER APPLICATIONS |
| 12/30266709 DC : 0 | BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| OIML R 139-1 : 2014 | COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| UNE-EN 61373:2011 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| 01/203451 DC : DRAFT MAY 2001 | IEC 61959-2 ED.1 - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES - PART 2: SECONDARY BATTERIES |
| BS ISO 9022-13:1998 | Optics and optical instruments. Environmental test methods Combined shock, bump or free fall and dry heat or cold |
| I.S. EN 61373:2010 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS |
| ANSI/AAMI CI86:2017 | COCHLEAR IMPLANT SYSTEMS: REQUIREMENTS FOR SAFETY, FUNCTIONAL VERIFICATION, LABELING AND RELIABILITY REPORTING |
| 02/210916 DC : DRAFT OCT 2002 | IEC 62271-002 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 002: SEISMIC QUALIFICATION FOR RATED VOLTAGES OF 72,5 KV AND ABOVE |
| BS ISO 21927-10:2011 | Smoke and heat control systems Specification for power output devices |
| ISO 15003:2006 | Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions |
| CEI EN 60068-2-57 : 2014 | ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME HISTORY AND SINE-BEAT METHOD |
| 13/30279642 DC : 0 | BS EN 61811-1 - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION AND BLANK DETAIL SPECIFICATION |
| NF EN 60068 2-64 : 2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| DIN ISO 9022-22:2012-10 | Optics and photonics - Environmental test methods - Part 22: Combined cold, dry heat or temperature change with bump or random vibration (ISO 9022-22:2012) |
| DIN EN ISO 16061:2015-09 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| CEI EN 62271-207 : 2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 207: SEISMIC QUALIFICATION FOR GAS-INSULATED SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV |
| CEI EN 61959 : 2005 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES |
| BS EN 60749:1999 | Semiconductor devices. Mechanical and climatic test methods |
| 14/30299574 DC : 0 | BS EN 61300-2-9 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK |
| DIN EN 138000 : 1997 | GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) |
| 07/30163407 DC : 0 | BS ISO 7240-28 - FIRE DETECTION AND ALARM SYSTEMS - PART 28: FIRE PROTECTION CONTROL EQUIPMENT |
| OIML R 46-1 & 2 : 2012 | ACTIVE ELECTRICAL ENERGY METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| BS ISO 21927-9:2012 | Smoke and heat control systems Specification for control equipment |
| BS EN 61811-51:2002 | Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Non-standardized types and construction |
| BS 2011-2.1Z/BFc:1984 | Environmental testing. Tests Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
| BS EN 60068-2-57:2013 | Environmental testing Tests. Test Ff: Vibration. Time-history and sine-beat method |
| OIML R 143 : 2009 | INSTRUMENTS FOR THE CONTINUOUS MEASUREMENT OF SO[2] IN STATIONARY SOURCE EMISSIONS |
| BS EN 61300-2-9:2017 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Shock |
| BS EN 165000-1:1996 | Film and hybrid integrated circuits Generic specification. Capability approval procedure |
| OIML R 137-1 & 2 : 2012 AMD 2014 | GAS METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| BS EN 60127-6:2014 | Miniature fuses Fuse-holders for miniature fuse-links |
| ISO 12405-1:2011 | Electrically propelled road vehicles Test specification for lithium-ion traction battery packs and systems Part 1: High-power applications |
| CSA E61959 : 2014 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES |
| I.S. EN 60068-2-6:2008 | ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL) |
| OIML D 11 : 2013 | GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS |
| IEC 62391-1:2015 RLV | Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification |
| IEC 62391-1:2015 | Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification |
| IEC 60810:2017 | Lamps, light sources and LED packages for road vehicles - Performance requirements |
| NF EN 45502-2-3 : 2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
| NF EN 60068-2-57 : 2013 | ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME-HISTORY AND SINE-BEAT METHOD |
| I.S. EN 60068-2-57:2013 | ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME-HISTORY AND SINE-BEAT METHOD (IEC 60068-2-57:2013 (EQV)) |
| I.S. EN 61300-2-9:2017 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK |
| I.S. EN 60068-2-81:2003 | ENVIRONMENTAL TESTING - PART 2-81: TESTS - TEST EI: SHOCK - SHOCK RESPONSE SPECTRUM SYNTHESIS |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| BS EN ISO 14630:2012 | Non-active surgical implants. General requirements |
| IEC 60068-2-80:2005 | Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode |
| EN 61300-2-9:2017 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock |
| DIN EN 14154-2:2011-06 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| EN 61811-51:2002 | Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction |
| EN 60810 : 2018 | LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
| EN 60068-2-50:1999 | Environmental testing - Part 2: Tests - Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
| DIN EN ISO 4064-2:2017-10 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
| EN 60068-2-81:2003 | Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis |
| EN 61587-2:2011 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 2: SEISMIC TESTS FOR CABINETS AND RACKS (IEC 61587-2:2011) |
| EN 61811-54:2002 | Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base |
| EN 60068-2-7:1993 | Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state |
| NF EN 60068 2-27 : 2009 | ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK |
| 04/30031093 DC : DRAFT FEB 2004 | ISO 4064-3 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST METHODS AND EQUIPMENT |
| BS ISO 9022-19:1994 | Optics and optical instruments. Environmental test methods Temperature cycles combined with sinusoidal or random vibration |
| UNE-EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| 17/30362102 DC : DRAFT AUG 2017 | BS ISO 21927-4 - SMOKE AND HEAT CONTROL SYSTEMS - PART 4: NATURAL SMOKE AND HEAT EXHAUST VENTILATORS; DESIGN, REQUIREMENTS AND INSTALLATION |
| BS EN 61587-5:2014 | Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 Seismic tests for chassis, subracks and plug-in units |
| DIN EN 16451:2015-09 | Railway applications - Braking - Brake pad holder |
| 11/30243761 DC : 0 | BS ISO 14708-7 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 7: PARTICULAR REQUIREMENTS FOR COCHLEAR IMPLANT SYSTEMS |
| 05/30132701 DC : DRAFT APR 2005 | IEC 62271-300 ED 1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 300: SEISMIC QUALIFICATION OF ALTERNATING CURRENT CIRCUIT-BREAKERS |
| 02/209131 DC : DRAFT JAN 2003 | IEC 61811-11 ED.1 - ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 11: BLANK DETAIL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION |
| 10/30215327 DC : DRAFT DEC 2010 | BS ISO 12405-2 - ELECTRICALLY PROPELLED ROAD VEHICLES - TEST SPECIFICATION FOR LITHIUM-ION TRACTION BATTERY SYSTEMS - PART 2: HIGH ENERGY APPLICATIONS |
| 06/30159993 DC : 0 | BS EN 61373 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS |
| BS 2011-4.3(1991) : 1991 AMD 7842 | ENVIRONMENTAL TESTING - MISCELLANEOUS - GUIDE TO SEISMIC TEST METHODS FOR EQUIPMENTS |
| BS ISO 9022-22:2012 | Optics and photonics. Environmental test methods Combined cold, dry heat or temperature change with bump or random vibration |
| CEI EN 61587-2 : 2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 2: SEISMIC TESTS FOR CABINETS AND RACKS |
| BS 6797:1986 | Specification for performance requirements for lamps for road vehicles |
| 18/30367515 DC : DRAFT APR 2018 | BS EN 60068-3-3 - ENVIRONMENTAL TESTING - PART 3-3: GUIDANCE - SEISMIC TEST METHODS FOR EQUIPMENTS |
| 10/30234803 DC : 0 | BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
| 02/210375 DC : DRAFT DEC 2002 | IEC 60068-2-80 ED.1 - ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST F(?) - MIXED MODE TESTING |
| BS EN 60068-2-50:2000 | Environmental testing. Test methods Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens |
| BS EN 60068-2-27:2009 | Environmental testing Tests. Test Ea and guidance. Shock |
| BS 7347:1990 | Guide for characteristics and performance of mechanical shock testing machines |
| BS EN 45502-2-3:2010 | Active implantable medical devices Particular requirements for cochlear and auditory brainstem implant systems |
| CEI EN 61373 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS |
| OIML R 144-2 : 2013 | INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 2: METROLOGICAL AND PERFORMANCE TESTS |
| BS EN 61959:2004 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Mechanical tests for sealed portable secondary cells and batteries |
| I.S. EN 61587-2:2011 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 2: SEISMIC TESTS FOR CABINETS AND RACKS (IEC 61587-2:2011) |
| BS ISO 3999:2004 | Radiation protection. Apparatus for industrial gamma radiography. Specifications for performance, design and tests |
| CSA E60127.6 : 2003 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| CAN/CSA-E60127-6-03 (R2017) | Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links (Adopted CEI/IEC 127-6:1994, first edition, 1994-04, including Amendment 1:1996, with Canadian deviations) | Coupe-circuit miniatures - Partie 6: Ensembles-porteurs pour cartouches de coupe-circuit miniatures (norme CEI/IEC 127-6:1994 adoptée, première édition, 1994-04, y compris l\'Amendement 1:1996, avec exigences propres au Canada) |
| IEC TR 62271-300:2006 | High-voltage switchgear and controlgear - Part 300: Seismic qualification of alternating current circuit-breakers |
| CEI EN 61587-5 : 2014 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 5: SEISMIC TESTS FOR CHASSIS, SUBRACKS AND PLUG-IN UNITS |
| ISO 7240-16:2007 | Fire detection and alarm systems — Part 16: Sound system control and indicating equipment |
| EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods |
| I.S. EN 61587-5:2014 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 5: SEISMIC TESTS FOR CHASSIS, SUBRACKS AND PLUG-IN UNITS |
| BS EN 138000:1997 | Harmonized system of quality assessment for electronic components. Generic specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required) |
| I.S. EN 60810:2015 | LAMPS FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
| BS ISO 15003:2006 | Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions |
| I.S. EN 60068-2-64:2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| I.S. EN 60068-2-80:2005 | ENVIRONMENTAL TESTING - PART 2-80: TESTS - TEST FI: VIBRATION - MIXED MODE |
| ISO 3999:2004 | Radiation protection — Apparatus for industrial gamma radiography — Specifications for performance, design and tests |
| OIML R 49-2 : 2013 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| OIML R 80-2 : 2017 | ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 2: METROLOGICAL CONTROLS AND TESTS |
| BIS IS/ISO 14708-1 : 2000 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| I.S. EN 133000:1998 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION) |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| IEC PAS 61811-55:2000 | Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base |
| IEC TS 62271-210:2013 | High-voltage switchgear and controlgear - Part 210: Seismic qualification for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV |
| ISO 9022-13:1998 | Optics and optical instruments Environmental test methods Part 13: Combined shock, bump or free fall and dry heat or cold |
| BS EN 45502-1:2015 | Implants for surgery. Active implantable medical devices General requirements for safety, marking and for information to be provided by the manufacturer |
| IEC 60749:1996+AMD1:2000+AMD2:2001 CSV | Semiconductor devices - Mechanical and climatic test methods |
| I.S. EN ISO 14630:2012 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 14630:2012) |
| I.S. EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| EN 45502-2-2 : 2008 COR 2009 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDES IMPLANTABLE DEFIBRILLATORS) |
| VDE 0560-800 : 1998 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
| DIN EN 137000 : 1998-03 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
| BS 2011-1.1:1989 | Environmental testing General and guidance |
| BS 2011-2.1Fc:1983 | Environmental testing. Tests Test Fc. Vibration (sinusoidal) |
| UNE-EN 62271-207:2012 | High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV |
| 11/30217192 DC : 0 | BS EN ISO 4064-2 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| I.S. EN IEC 60810:2018 | LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
| OIML R 140 : 2007 | MEASURING SYSTEMS FOR GASEOUS FUEL |
| NF EN 62271-2 : 2004 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: SEISMIC QUALIFICATION FOR RATED VOLTAGES OF 72,5 KV AND ABOVE |
| BS EN 61811-52:2002 | Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 20 mm x 10 mm base |
| 07/30162213 DC : 0 | BS EN 60747-15 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 15: ISOLATED POWER SEMICONDUCTOR DEVICES |
| ISO 9022-19:1994 | Optics and optical instruments Environmental test methods Part 19: Temperature cycles combined with sinusoidal or random vibration |
| 13/30285624 DC : 0 | BS EN ISO 16061 - INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| ISO 9022-15:1998 | Optics and optical instruments Environmental test methods Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold |
| 08/30191609 DC : DRAFT DEC 2008 | BS ISO 14708-6 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 6: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDING IMPLANTABLE DEFIBRILLATORS) |
| DIN ISO 9022-3:2015-08 | Optics and photonics - Environmental test methods - Part 3: Mechanical stress (ISO 9022-3:2015) |
| BS EN ISO 4064-2:2017 | Water meters for cold potable water and hot water Test methods |
| BS ISO 8568:2007 | Mechanical shock. Testing machines. Characteristics and performance |
| CEI EN 50604-1 : 1ED 2017 | SECONDARY LITHIUM BATTERIES FOR LIGHT EV (ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| DEFSTAN 60-2/2(1995) : 1995 | CONNECTORS, FOR OPTICAL FIBRES AND CABLES |
| 97/231700 DC : DRAFT DEC 1997 | IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| 13/30280588 DC : 0 | BS ISO 7240-28 - FIRE DETECTION AND ALARM SYSTEMS - PART 28: FIRE PROTECTION CONTROL EQUIPMENT |
| BS EN 60068-2-6:2008 | Environmental testing Tests. Test Fc. Vibration (sinusoidal) |
| EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
| ISO 7240-2:2017 | Fire detection and alarm systems — Part 2: Fire detection control and indicating equipment |
| UNI CEI EN ISO 4064-2 : 2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| NF EN 60068 2-7 : 1994 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST GA AND GUIDANCE: ACCELERATION, STEADY STATE |
| 12/30254899 DC : 0 | BS EN 54-2 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| BS EN 61811-53:2002 | Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 14 mm x 9 mm base |
| BS ISO 9022-16:1998 | Optics and optical instruments. Environmental test methods Combined bounce or steady-state acceleration and dry heat or cold |
| 10/30232728 DC : 0 | BS EN 62271-207 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 207: SEISMIC QUALIFICATION FOR GAS-INSULATED SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV |
| 97/703020 DC : 0 | ISO/DIS 3999 - APPARATUS FOR INDUSTRIAL GAMMA RADIOGRAPHY - DESIGN AND TEST CRITERIA |
| 04/300654 DC : DRAFT JAN 2004 | BS EN ISO 14630 - NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| OIML R 137-1 : 2006 | GAS METERS - PART 1: REQUIREMENTS |
| BS ISO 9022-3:2015 | Optics and photonics. Environmental test methods Mechanical stress |
| BS EN 61811-55:2002 | Electromechanical non-specified time all-or-nothing relays of assessed quality Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 11 mm x 7,5 mm (max.) base |
| BS EN 61811-11:2003 | Electromechanical all-or-nothing relays Blank detail specification. Relays for industrial application |
| 09/30211740 DC : 0 | BS EN 62271-210 ED1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 210: SEISMIC QUALIFICATION FOR METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
| BS EN 60068-2-51:2000 | Environmental testing. Test methods Tests. Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
| BS EN 61811-54:2002 | Electromechanical non-specified time all-or-nothing relays of assessed quality Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 15 mm x 7,5 mm base |
| I.S. EN 138000:1998 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) (GENERIC SPECIFICATION) |
| BS EN 62271-2:2003 | High-voltage switchgear and controlgear Seismic qualification for rated voltages of 72,5 kV and above |
| CSA E60127.6 : 2003 : R2012 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| BS EN 45502-2-2:2008 | Active implantable medical devices Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators) |
| IEEE C37.122.1-2014 | IEEE Guide for Gas-Insulated Substations Rated Above 52 kV |
| ISO 14708-2:2012 | Implants for surgery Active implantable medical devices Part 2: Cardiac pacemakers |
| ISO 18243:2017 | Electrically propelled mopeds and motorcycles — Test specifications and safety requirements for lithium-ion battery systems |
| I.S. EN 62271-207:2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 207: SEISMIC QUALIFICATION FOR GAS-INSULATED SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV (IEC 62271-207:2012 (EQV)) |
| BS EN IEC 60810:2018 | Lamps, light sources and led packages for road vehicles. Performance requirements |
| NF EN 60127-6 : 2014 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| ISO 14708-6:2010 | Implants for surgery Active implantable medical devices Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) |
| OIML R 35-2 : 2011 | MATERIAL MEASURES OF LENGTH FOR GENERAL USE - PART 2: TEST METHODS |
| CEI EN 60068-2-27 : 2012 | ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK |
| NF EN 60068 2-6 : 2008 | ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL) |
| OIML R 126 : 2012 | EVIDENTIAL BREATH ANALYZERS |
| UNI EN 54-16 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
| ISO 21927-10:2011 | Smoke and heat control systems — Part 10: Specification for power output devices |
| ISO 17089-1:2010 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
| ISO 8568:2007 | Mechanical shock Testing machines Characteristics and performance |
| ISO 9022-10:1998 | Optics and optical instruments Environmental test methods Part 10: Combined sinusoidal vibration and dry heat or cold |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| ISO 9022-16:1998 | Optics and optical instruments Environmental test methods Part 16: Combined bounce or steady-state acceleration and dry heat or cold |
| IEC 60748-23-1:2002 | Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification |
| I.S. EN 61959:2004 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES |
| BS EN 54-21:2006 | Fire detection and fire alarm systems Alarm transmission and fault warning routing equipment |
| BS EN 14154-2 : 2005 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| CEI EN 60068-2-64 : 2012 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| UNE-EN 14154-2:2005 | Water meters - Part 2 : Installation and conditions of use |
| IEC 61811-1:2015 | Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification |
| EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| UNI EN 14154-2 : 2011 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| UNI CEI EN 45502-2-3 : 2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
| UNI EN ISO 14630 : 2013 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| UNE-EN 54-16:2010 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| UNE-EN 60068-2-27:2011 | Environmental testing -- Part 2-27: Tests - Test Ea and guidance: Shock |
| BS EN 61811-1:2015 | Electromechanical telecom elementary relays of assessed quality Generic specification and blank detail specification |
| 12/30260802 DC : 0 | BS EN 62391-1 - FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| BS EN 61373:2010 | Railway applications. Rolling stock equipment. Shock and vibration tests |
| 05/30138371 DC : DRAFT AUG 2005 | IEC 60068-2-27 ED 4 - BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2-27: TESTS - TEST EA AND GUIDANCE - SHOCK AND BUMP |
| 05/30134423 DC : DRAFT JUN 2005 | IEC 62271-207 - HV SWITCHGEAR ASSEMBLIES - PART 207: SEISMIC QUALIFICATION FOR GAS-INSULATED SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV |
| 12/30259014 DC : 0 | BS EN 60127-6 - MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS |
| OIML R 117-1 : 2007 | DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| PD IEC/TS 61463:2016 | Bushings. Seismic qualification |
| IEC TS 61463:2016 | Bushings - Seismic qualification |
| BS 2011-2.1FF(1989) : 1990 AMD 7834 | ENVIRONMENTAL TESTING - TESTS - TEST Ff. VIBRATION - TIME-HISTORY METHOD |
| OIML R 21 : 2007 | TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT |
| 13/30233325 DC : 0 | BS EN 45502-1 - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| BS EN 60068-2-53:2010 | Environmental testing Tests and guidance. Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests |
| 11/30249337 DC : 0 | BS EN 61587-5 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 5: SEISMIC TESTS FOR CHASSIS, SUBRACKS, AND ASSOCIATED PLUG-IN UNIT |
| ISO 9022-3:2015 | Optics and photonics Environmental test methods Part 3: Mechanical stress |
| 06/30149145 DC : DRAFT OCT 2006 | IEC 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| BS EN 62271-207:2012 | High-voltage switchgear and controlgear Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV |
| BS EN 130000:1994 | Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors |
| 10/30216308 DC : 0 | BS EN 60068-2-57:2000+A1 - ENVIRONMENTAL TESTING - PART 2-57: TEST METHODS - TEST FF: VIBRATION - TIME-HISTORY & SINE-BEAT METHOD |
| 04/30031075 DC : DRAFT FEB 2004 | ISO 4064-1 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS |
| NF EN 60068 2-29 : 1994 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST EB AND GUIDANCE: BUMP |
| UNE-EN ISO 4064-2:2015 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
| BS EN 60068-2-80:2005 | Environmental testing Tests - Test Fi: Vibration. Mixed mode |
| NF EN 45502-2-2 : 2008 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDES IMPLANTABLE DEFIBRILLATORS) |
| BS EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications General safety requirements and test methods |
| BS 2011-2.1FE(1991) : 1991 AMD 7841 | ENVIRONMENTAL TESTING - TESTS - TEST FE AND GUIDANCE - VIBRATION (SINE-BEAT METHOD) |
| BS ISO 17089-1:2019 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| I.S. EN 62271-2:2003 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - SEISMIC QUALIFICATION FOR RATED VOLTAGES OF 72,5 KV AND ABOVE |
| ANSI/AAMI/ISO 14708-1:2014 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| I.S. EN 60127-6:2014 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS |
| I.S. EN 165000-1:1998 | FILM AND HYBRID INTEGRATED CIRCUITS - PART 1: GENERIC SPECIFICATION CAPABILITY APPROVAL PROCEDURE |
| I.S. EN ISO 4064-2:2017 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
| DIN EN ISO 4064-2:2016-09 (Draft) | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
| ISO 7240-4:2017 | Fire detection and alarm systems — Part 4: Power supply equipment |
| CEI EN 60068-2-6 : 2009 | ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL) |
| EN IEC 60810:2018 | Lamps, light sources and led packages for road vehicles - Performance requirements |
| ISO 9022-22:2012 | Optics and photonics — Environmental test methods — Part 22: Combined cold, dry heat or temperature change with bump or random vibration |
| I.S. EN 60068-2-27:2009 | ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK |
| ISO 14708-7:2013 | Implants for surgery Active implantable medical devices Part 7: Particular requirements for cochlear implant systems |
| I.S. EN 54-16:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
| ISO 7240-28:2014 | Fire detection and alarm systems Part 28: Fire protection control equipment |
| I.S. EN 62391-1:2016 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| IEC 60068-2-81:2003 | Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis |
| I.S. EN ISO 16061:2015 | INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 16061:2015) |
| ISO 12405-2:2012 | Electrically propelled road vehicles Test specification for lithium-ion traction battery packs and systems Part 2: High-energy applications |
| DIN EN ISO 14630:2013-03 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| DIN EN 12101-10:2006-01 | Smoke and heat control systems - Part 10: Power supplies |
| 16/30350012 DC : 0 | BS EN 60810 - LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
| BS EN 12101-10:2005 | Smoke and heat control systems Power supplies |
| ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants General requirements |
| ISO 4064-2:2014 | Water meters for cold potable water and hot water — Part 2: Test methods |
| IEC 61811-53:2002 | Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base |
| IEC 61166:1993 | High-voltage alternating current circuit-breakers - Guide for seismic qualification of high-voltage alternating current circuit-breakers |
| IEC 61811-11:2002 | Electromechanical elementary relays of assessed quality - Part 11: Blank detail specification - Relays for industrial application |
| IEC 61747-1:1998+AMD1:2003 CSV | Liquid crystal and solid-state display devices - Part 1: Generic specification |
| IEC 61959:2004 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries |
| IEC 60068-2-57:2013 | Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method |
| BS EN 54-2 : 1998 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| IEC 61587-5:2013 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units |
| IEC 61811-55:2002 | Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base |
| IEC 61811-51:2002 | Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction |
| IEC 61811-52:2002 | Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10 mm base |
| IEC 61587-2:2011 | Mechanical structures for electronic equipment - Tests for IEC 60917 and 60297 - Part 2: Seismic tests for cabinets and racks |
| BS EN 60810:2015 | Lamps for road vehicles. Performance requirements |
| IEC 61811-54:2002 | Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base |
| UNE-EN ISO 14630:2013 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| UNE-EN 45502-2-3:2010 | Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
| IEC 60127-6:2014 | Miniature fuses - Part 6: Fuse-holders for miniature fuse-links |
| IEC 62271-2:2003 | High-voltage switchgear and controlgear - Part 2: Seismic qualification for rated voltages of 72,5 kV and above |
| EN 61811-1:2015 | Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification |
| EN 61811-52:2002 | Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10 mm base |
| EN 54-21:2006 | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
| EN 14154-2:2005+A2:2011 | Water meters - Part 2: Installation and conditions of use |
| EN ISO 4064-2:2017 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
| EN 16451:2015 | Railway applications - Braking - Brake pad holder |
| EN 45502-2-3:2010 | Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
| EN 54-16:2008 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| EN ISO 14630:2012 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| BS 2011-2.1Z/AFc:1984 | Environmental testing. Tests Tests Z/AFc. Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
| BS EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants. General requirements |
| BS EN 133000:1997 | Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression |
| BS CECC 16000-1:1992 | Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General |
| 11/30219104 DC : DRAFT MAY 2011 | BS ISO 9022-22 - OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 22: COMBINED COLD, DRY HEAT OR TEMPERATURE CHANGE WITH BUMP OR RANDOM VIBRATION |
| PREN 45502-1 : DRAFT 2013 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| BS ISO 7240-28:2014 | Fire detection and alarm systems Fire protection control equipment |
| BS ISO 12405-2:2012 | Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems High-energy applications |
| CEI EN 62391-1 : 2016 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| CEI EN 138000 : 1996 | GENERIC SPECIFICATION: FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) |
| 13/30264596 DC : 0 | BS EN 60747-14-7 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-7: SEMICONDUCTOR SENSORS - FLOW METER |
| PD IEC/TS 62271-210:2013 | High-voltage switchgear and controlgear Seismic qualification for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV |
| 13/30264600 DC : 0 | BS EN 60747-14-8 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-8: SEMICONDUCTOR SENSORS - CAPACITIVE DEGRADATION SENSOR OF LIQUID |
| UNE-EN 60068-2-53:2011 | Environmental testing -- Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests |
| BS IEC 60748-23-1:2002 | Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification Generic specification |
| BS ISO 9022-10:1998 | Optics and optical instruments. Environmental test methods Combined sinusoidal vibration and dry heat or cold |
| OIML R 146-1 : 2016 | PROTEIN MEASURING INSTRUMENTS FOR CEREAL GRAIN AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| 02/707208 DC : DRAFT MAY 2002 | ISO/DIS 8568 - MECHANICAL SHOCK - TESTING MACHINES - CHARACTERISTICS AND PERFORMANCE |
| BS EN 54-16:2008 | Fire detection and fire alarm systems Voice alarm control and indicating equipment |
| BS 2011-4.2:1984 | Environmental testing. Miscellaneous Guidance on the application of the tests of BS 2011 to simulate the effects of storage |
| BS EN 60068-2-64:1995 | Environmental testing. Test methods Test Fh. Vibration, broad-band random (digital control) and guidance |
| BS EN 60068-2-81:2003 | Environmental testing. Test methods Test Ei. Shock. Shock response spectrum synthesis |
| BS EN 61587-2:2011 | Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 Seismic tests for cabinets and racks |
| BS ISO 9022-15:1998 | Optics and optical instruments. Environmental test methods Combined digitally controlled broad-band random vibration and dry heat or cold |
| 04/30115471 DC : DRAFT JUL 2004 | ISO 7240-21 - FIRE DETECTION AND ALARM SYSTEMS - PART 21: ROUTING EQUIPMENT |
| OIML R 139-2 : 2014 | COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| BS ISO 17089-1:2010 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| OIML R 144-1 : 2013 | INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| I.S. EN 61811-54:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 54: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 15 MM X 7,5 MM BASE |
| I.S. EN 61811-53:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 53: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 14 MM X 9 MM BASE |
| I.S. EN 16451:2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| IEEE C62.35-2010 | IEEE Standard Test Methods for Avalanche Junction Semiconductor Surge-Protective Device Components |
| ISO 3999-1:2000 | Radiation protection Apparatus for industrial gamma radiography Part 1: Specifications for performance, design and tests |
| I.S. EN 45502-2-3:2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
| I.S. EN 61811-11:2003 | ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 11: BLANK DETAIL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION |
| NF EN 61373 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS |
| I.S. EN 61811-1:2015 | ELECTROMECHANICAL TELECOM ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION AND BLANK DETAIL SPECIFICATION |
| ISO 21927-9:2012 | Smoke and heat control systems — Part 9: Specification for control equipment |
| NF EN 60068 2-59 : 1994 | ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST FE: VIBRATION SINE BEAT METHOD |
| CEI EN 60068-2-53 : 2011 | ENVIRONMENTAL TESTING - PART 2-53: TESTS AND GUIDANCE: COMBINED CLIMATIC (TEMPERATURE/HUMIDITY) AND DYNAMIC (VIBRATION/SHOCK) TESTS |
| I.S. EN 61811-51:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 51: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - NON-STANDARDIZED TYPES AND CONSTRUCTION |
| I.S. EN 61811-52:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 52: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 20 MM X 10 MM BASE |
| I.S. EN 61811-55:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 55: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 11 MM X 7,5 MM (MAX.) BASE |
| IEC 60300-3-5:2001 | Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles |
| ISO 7240-21:2005 | Fire detection and alarm systems — Part 21: Routing equipment |
| I.S. EN 45502-2-1:2004 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-1: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT BRADYARRHYTHMIA (CARDIAC PACEMAKERS) |
| I.S. EN 60068-2-53:2010 | ENVIRONMENTAL TESTING - PART 2-53: TESTS AND GUIDANCE: COMBINED CLIMATIC (TEMPERATURE/HUMIDITY) AND DYNAMIC (VIBRATION/SHOCK) TESTS |
| BS EN 54-4:1998 | Fire detection and fire alarm systems Power supply equipment |
| IEC 60068-2-53:2010 | Environmental testing - Part 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests |
| IEC 61300-2-9:2017 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock |
| ISO 14630:2012 | Non-active surgical implants — General requirements |
| IEC 62271-207:2012 | High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV |
| EN 45502-1 : 2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| EN 61811-55:2002 | Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base |
| EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| EN 62271-207:2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 207: SEISMIC QUALIFICATION FOR GAS-INSULATED SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV (IEC 62271-207:2012) |
| EN 62271-2:2003 | High-voltage switchgear and controlgear - Part 2: Seismic qualification for rated voltages of 72,5 kV and above |
| EN 61811-11:2003 | Electromechanical elementary relays of assessed quality - Part 11: Blank detail specification - Relays for industrial application |
| EN 61811-53:2002 | Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base |
| DIN EN 54-21:2006-08 | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
| EN 60068-2-57:2013 | Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| EN 45502-2-2 : 2008 COR 2009 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDES IMPLANTABLE DEFIBRILLATORS) |
| EN 60068-2-80:2005 | Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode |
| EN 165000-1:1996 | Film and hybrid integrated circuits - Part 1: Generic specification - Capability approval procedure |
| EN 61587-5:2014 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| EN 137000:1995 | Generic Specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors |
| EN 60068-2-51:1999 | Environmental testing - Part 2: Tests - Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
| DIN EN 54-16:2008-06 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| EN 60068-2-53:2010 | Environmental testing - Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests |
| EN 60068-2-64:2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| EN 61959:2004 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries |
| EN 62391-1:2016/AC:2016-12 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 62391-1:2015/COR1:2016) |
| EN 60127-6:2014 | Miniature fuses - Part 6: Fuse-holders for miniature fuse-links |
| EN 60749 : 99 AMD 2 2001 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS |
| BS 2011-2.1EA(1988) : 1988 AMD 7814 | ENVIRONMENTAL TESTING - TEST - TEST EA: SHOCK |
| BS CECC 30000:1992 | Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors |
| BS 2011-2.1Ga:1984 | Environmental testing. Tests Test Ga. Acceleration, steady state |
| BS 2011-2.1EB(1987) : 1987 AMD 7827 | ENVIRONMENTAL TESTING - TEST - TEST EB: BUMP |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60068-2-81:2003 | Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60068-2-57:2013 | Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60068-2-29:1987 | Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| IEC 60068-2-55:2013 | Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce |
| IEC 60068-2-65:2013 | Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method |
| IEC 60068-2-59:1990 | Environmental testing. Part 2: Tests. Test Fe: Vibration - Sine-beat method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.