ISO 5167-1:2003
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
16-06-2022
Superseded by
Language(s)
English, French
Published date
24-02-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 5167-1:2003 defines terms and symbols and establishes the general principles for methods of measurement and computation of the flowrate of fluid flowing in a conduit by means of pressure differential devices (orifice plates, nozzles and Venturi tubes) when they are inserted into a circular cross-section conduit running full.
ISO 5167-1:2003 also specifies the general requirements for methods of measurement, installation and determination of the uncertainty of the measurement of flowrate. It also defines the general specified limits of pipe size and Reynolds number for which these pressure differential devices are to be used.
ISO 5167 (all parts) is applicable only to flow that remains subsonic throughout the measuring section and where the fluid can be considered as single-phase. It is not applicable to the measurement of pulsating flow.
| DevelopmentNote |
Supersedes ISO 5167, R 541 and NFX 10 102 (04/2001) Supersedes ISO/DIS 5167-1 (02/2003) Together with ISO 5167-2, ISO 5167-3 and ISO 5167-4 supersedes the 1st Edition of ISO 5167-1 (03/2003)
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 5167-1 : 2003 | Identical |
| JIS Z 8762-1:2007 | Identical |
| NF EN ISO 5167-1 : 2003 | Identical |
| UNE-EN ISO 5167-1:2003 | Identical |
| NBN EN 1286 : 1999 | Identical |
| NBN EN ISO 5167-1 : 2003 | Identical |
| NEN EN ISO 5167-1 : 2003 | Identical |
| NS EN ISO 5167-1 : 2ED 2003 | Identical |
| I.S. EN ISO 5167-1:2003 | Identical |
| PN EN ISO 5167-1 : 2005 | Identical |
| SN EN ISO 5167-1 : 2003 | Identical |
| UNI EN ISO 5167-1 : 2004 | Identical |
| BIS IS 14615-1 : 2018 | Identical |
| SS-EN ISO 5167-1:2003 | Identical |
| BS EN ISO 5167-1:2003 | Identical |
| EN ISO 5167-1:2003 | Identical |
| DIN EN ISO 5167-1:2004-01 | Identical |
| DIN 1952:1982-07 | Corresponds |
| ISO 29463-1:2017 | High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking |
| PREN 14175-3 : DRAFT 2017 | FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
| 04/30113177 DC : DRAFT JUNE 2004 | ISO 8178-11 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 11: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS FROM ENGINES USED IN NONROAD MOBILE MACHINERY UNDER TRANSIENT TEST CONDITIONS |
| 17/30332536 DC : 0 | BS EN 13141-5 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES |
| DIN EN ISO 5802:2016-02 | INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU (ISO 5802:2001 + AMD 1:2015) |
| BS EN 1366-10 : 2011 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| BS EN ISO 27509:2012 | Petroleum and natural gas industries. Compact flanged connections with IX seal ring |
| 04/30113519 DC : DRAFT MAY 2004 | EN 12975-2 - THERMAL SOLAR SYSTEMS AND COMPONENTS - SOLAR COLLECTORS - PART 2: TEST METHODS |
| BS EN 16145:2012 | Sanitary tapware. Extractable outlets for sink and basin mixers. General technical specification |
| 10/30218038 DC : DRAFT MAY 2010 | BS ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| EN 16905-4:2017 | Gas-fired endothermic engine driven heat pumps - Part 4: Test methods |
| BS EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) Classification, performance testing, marking |
| BS ISO 5168:2005 | Measurement of fluid flow. Procedures for the evaluation of uncertainties |
| BS ISO 16345:2014 | Water-cooling towers. Testing and rating of thermal performance |
| 13/30280715 DC : 0 | BS EN 1287 - SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATIONS |
| BS EN 16445:2013 | Ventilation for buildings. Air diffusion. Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet |
| BS ISO 5801 : 2007 | INDUSTRIAL FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
| PD CEN/TR 16478:2012 | Surveillance from first commissioning on measuring devices used in natural gas supply to the installations of the activities under the Directive 2003/87/EC establishing a scheme of CO<sub>2</sub> emissions trading |
| ISO/TR 9824:2007 | Hydrometry Measurement of free surface flow in closed conduits |
| BS EN 16146 : 2012 | SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| 09/30206346 DC : 0 | BS EN 14511-3 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 3: TEST METHODS |
| I.S. EN 14511-3:2018 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS FOR SPACE HEATING AND COOLING AND PROCESS CHILLERS, WITH ELECTRICALLY DRIVEN COMPRESSORS - PART 3: TEST METHODS |
| I.S. EN 61121:2013 | TUMBLE DRYERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE (IEC 61121:2012 (MOD)) |
| 17/30326671 DC : 0 | BS ISO 27919-1 - CARBON DIOXIDE CAPTURE - PART 1: PERFORMANCE EVALUATION METHODS FOR POST-COMBUSTION CO[2] CAPTURE INTEGRATED WITH A POWER PLANT |
| 17/30285147 DC : 0 | BS ISO 18326 - SINGLE-DUCT PORTABLE AIRCONDITIONERS AND HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| I.S. EN 1366-10:2011 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| BS ISO 19970:2017 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Metering of gas as fuel on LNG carriers during cargo transfer operations |
| 09/30182875 DC : 0 | BS ISO 29463-4 - HIGH-EFFICIENCY FILTERS AND FILTER MEDIA FOR REMOVING PARTICLES FROM AIR - PART 4: TEST METHOD FOR DETERMINING THE LEAKAGE OF FILTER ELEMENTS (SCAN METHOD) |
| 08/30188933 DC : DRAFT SEP 2008 | BS EN 15854 - VENTILATION FOR BUILDINGS - AIR DIFFUSION - AERODYNAMIC TESTING AND RATING FOR MIXING FLOW APPLICATION - NON-ISOTHERMAL PROCEDURE FOR A COLD JET |
| ISO 6944-1:2008 | Fire containment — Elements of building construction — Part 1: Ventilation ducts |
| 05/30127036 DC : DRAFT JAN 2005 | EN 817 - SANITARY TAPWARE - MECHANICAL MIXERS (PN 10) - GENERAL TECHNICAL SPECIFICATIONS |
| ISO 5168:2005 | Measurement of fluid flow — Procedures for the evaluation of uncertainties |
| DIN EN ISO 18854:2015-08 | SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015) |
| 08/30169640 DC : 0 | BS ISO 17089-1 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT |
| PREN 14511-3 : DRAFT 2015 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS FOR SPACE HEATING AND COOLING AND PROCESS CHILLERS, WITH ELECTRICALLY DRIVEN COMPRESSORS - PART 3: TEST METHODS |
| ISO 8178-1:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| 07/30167778 DC : 0 | BS ISO 11155-2 - ROAD VEHICLES - AIR FILTERS FOR PASSENGER COMPARTMENTS - PART 2: TEST FOR GASEOUS FILTRATION |
| 05/30136094 DC : DRAFT JULY 2005 | ISO 5151 - NON-DUCTED AIR CONDITIONERS AND HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| DD IEC/PAS 62611:2009 | Vacuum cleaners for commercial use. Methods for measuring performance |
| BS EN 16211:2015 | Ventilation for buildings. Measurement of air flows on site. Methods |
| 15/30284307 DC : 0 | BS ISO 5151 - NON-DUCTED AIR CONDITIONERS AND HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| BS ISO 15112 : 2011 | NATURAL GAS - ENERGY DETERMINATION |
| BS ISO 16183:2002 | Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions |
| 16/30313383 DC : 0 | BS ISO 19970 - REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - METERING OF GAS AS FUEL ON LNG CARRIERS DURING CARGO TRANSFER OPERATIONS |
| 16/30336421 DC : 0 | BS EN 81-58 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST |
| I.S. EN 16211:2015 | VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| PD ISO/TR 9824:2007 | Hydrometry. Measurement of free surface flow in closed conduits |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| ISO 15042:2017 | Multiple split-system air conditioners and air-to-air heat pumps — Testing and rating for performance |
| CSA C748 : 2013 | PERFORMANCE OF DIRECT-EXPANSION (DX) GROUND-SOURCE HEAT PUMPS |
| ISO 29042-1:2008 | Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods |
| ISO 16183:2002 | Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions |
| PREN 1287 : DRAFT 2015 | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| ISO 29042-9:2011 | Safety of machinery Evaluation of the emission of airborne hazardous substances Part 9: Decontamination index |
| I.S. EN ISO 15012-2:2008 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES |
| PREN 1366-2 : DRAFT 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| I.S. EN ISO 13349:2010 | FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES |
| I.S. EN ISO 15970:2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
| CTI STD 146 : 0 | STANDARD FOR LIQUID FLOW MEASUREMENT |
| I.S. EN 61591:1998 | HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE |
| 17/30332894 DC : 0 | BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| DIN EN 1287:2015-07 (Draft) | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| UNE-EN 60312-1:2017 | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| UNI EN 14511-3 : 2013 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 3: TEST METHODS |
| UNE 19703:2016 | Sanitary tapware. Technical specifications. |
| NF EN 1366-9 : 2009 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
| ISO 15112:2011 | Natural gas Energy determination |
| UNE-EN ISO 5801:2010 | Industrial fans - Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008) |
| IEC 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
| DIN EN 1822-5:2011-01 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| I.S. EN 1822-5:2009 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| EN 1822-5:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements |
| UNE-EN 1822-4:2010 | High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method) |
| UNI EN 1822-4 : 2010 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 4: DETERMINING LEAKAGE OF FILTER ELEMENTS (SCAN METHOD) |
| I.S. EN ISO 14644-3:2006 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
| BS EN 1822-2:2009 | High efficiency air filters (EPA, HEPA and ULPA) Aerosol production, measuring equipment, particle counting statistics |
| DIN EN 24006:1993-08 | Measurement of fluid flow in closed conduits; vocabulary and symbols (ISO 4006:1991); German version EN 24006:1993 |
| DIN EN 13434:2006-05 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G - TYPE B |
| DIN EN 1093-11:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 11: DECONTAMINATION INDEX |
| DIN EN 13433:2006-05 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G - TYPE A |
| DIN EN 13355:2010-06 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| DIN EN 13141-6:2015-02 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING |
| BS EN 15091:2013 | Sanitary tapware. Electronic opening and closing sanitary tapware |
| BS EN 14454:2005 | Devices to prevent pollution by backflow of potable water. Hose union backflow preventer DN 15 to DN 32 inclusive. Family H, type A |
| BS EN 12952-15:2003 | Water-tube boilers and auxiliary installations Acceptance tests |
| BS EN 13141-2:2010 | Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust and supply air terminal devices |
| BS EN 817:2008 | Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications |
| BS EN ISO 16890-2:2016 | Air filters for general ventilation Measurement of fractional efficiency and air flow resistance |
| UNE-EN ISO 16890-2:2017 | Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016) |
| 15/30278074 DC : 0 | BS EN ISO 16890-3 - AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED |
| BS EN 14453:2005 | Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20. Family D, type C |
| BS EN 13030:2001 | Ventilation for buildings. Terminals. Performance testing of louvres subjected to simulated rain |
| DIN EN 15091:2014-03 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| BS EN ISO 5167-3:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Nozzles and Venturi nozzles |
| UNE-EN ISO 16890-3:2017 | Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016) |
| BS EN ISO 16890-3:2016 | Air filters for general ventilation Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured |
| BS EN 14367:2005 | Non controllable backflow preventer with different pressure zones. Family C, type A |
| I.S. EN 13141-6:2014 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING |
| ASHRAE 133 : 2015 | METHOD OF TESTING DIRECT EVAPORATIVE AIR COOLERS |
| I.S. EN 1287:2017 | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 200:2008-10 | Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification; German version EN 200:2008 |
| EN 12589:2001 | Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units |
| EN 1093-6:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
| EN 13030:2001 | Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain |
| EN 1286:1999 | Sanitary tapware - Low pressure mechanical mixing valves - General technical specification |
| EN 13141-2:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| EN 12953-11:2003 | Shell boilers - Part 11: Acceptance tests |
| EN 12238:2001 | Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application |
| EN 1111:2017 | Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
| EN 1287:2017 | Sanitary tapware - Low pressure thermostatic mixing valves - General technical specification |
| EN 13433:2006 | Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A |
| DIN EN 14367:2005-10 | Non controllable backflow preventer with different pressure zones - Family C, type A |
| EN 12975-2:2006 | Thermal solar systems and components - Solar collectors - Part 2: Test methods |
| EN 12239:2001 | Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications |
| DIN EN ISO 4064-2:2017-10 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
| DIN EN 1287:2017-10 | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| DIN EN 14705:2005-10 | Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers; German version EN 14705:2005 |
| DIN EN 1111:2017-10 | SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| CEN/TR 16478:2012 | Surveillance from first commissioning on measuring devices used in natural gas supply to the installations of the activities under the Directive 2003/87/EC establishing a scheme of CO2 emissions trading |
| DIN EN 14453:2005-08 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C; German version EN 14453:2005 |
| EN 12215:2004+A1:2009 | Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
| EN 13355:2004+A1:2009 | Coating plants - Combined booths - Safety requirements |
| EN 13181:2001 | Ventilation for buildings - Terminals - Performance testing of louvres subject to simulated sand |
| DIN EN 15500:2008-12 | CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT |
| ONORM EN 1366-10 : 2011 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| BS EN ISO 7235:2009 | Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss |
| ONORM EN ISO 13349 : 2012 | FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES (ISO 13349:2010) |
| BS EN 12261:2002 | Gas meters. Turbine gas meters |
| ONORM EN ISO 27509 : OCT 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012 + COR 1:2013) |
| BS EN ISO 15112:2014 | Natural gas. Energy determination |
| UNI EN 16445 : 2013 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - AERODYNAMIC TESTING AND RATING FOR MIXED FLOW APPLICATION: NON-ISOTHERMAL PROCEDURE FOR COLD JET |
| ISO 10294-1:1996 | Fire resistance tests Fire dampers for air distribution systems Part 1: Test method |
| I.S. EN ISO 16890-3:2016 | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| PD ISO/TR 26762:2008 | Natural gas. Upstream area. Allocation of gas and condensate |
| UNE-EN 15882-1:2013 | Extended application of results from fire resistance tests for service installations - Part 1: Ducts |
| 11/30233217 DC : 0 | BS EN 1751 - VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
| I.S. EN ISO 16890-2:2016 | AIR FILTERS FOR GENERAL VENTILATION - PART 2: MEASUREMENT OF FRACTIONAL EFFICIENCY AND AIR FLOW RESISTANCE (ISO 16890-2:2016) |
| 17/30352210 DC : 0 | BS ISO 21925-1 - FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 1: MECHANICAL DAMPERS |
| 14/30301149 DC : 0 | BS EN 1366-2 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| I.S. EN 779:2012 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| BS ISO 17089-1:2019 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| BS EN 15500:2008 | Control for heating, ventilating and air-conditioning applications. Electronic individual zone control equipment |
| 11/30173941 DC : 0 | BS EN ISO 27509 - PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
| BS ISO 13579-1:2013 | Industrial furnaces and associated processing equipment. Method of measuring energy balance and calculating efficiency General methodology |
| 11/30243718 DC : 0 | BS EN 61121 ED 4.0 - TUMBLE DRYERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| 13/30277457 DC : 0 | BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| 16/30334068 DC : 0 | BS ISO 8178-4 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 4: STEADY-STATE TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS |
| PD IEC/TS 62282-7-1:2017 | Fuel cell technologies Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC) |
| 05/30098143 DC : DRAFT OCT 2005 | ISO 2186 - FLUID FLOW IN CLOSED CONDUITS - CONNECTIONS FOR PRESSURE SIGNAL TRANSMISSIONS BETWEEN PRIMARY AND SECONDARY ELEMENTS |
| 98/719326 DC : DRAFT DEC 1998 | ISO/CD 15042 - MULTI-SPLIT SYSTEM AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| BS ISO 11155-2:2009 | Road vehicles. Air filters for passenger compartments Test for gaseous filtration |
| BS ISO 8178-11:2006 | Reciprocating internal combustion engines. Exhaust emission measurement Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions |
| ISO 16494:2014 | Heat recovery ventilators and energy recovery ventilators Method of test for performance |
| DIN EN 16145:2013-03 | Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification |
| 09/30182865 DC : 0 | BS ISO 29463-1 - HIGH EFFICIENCY FILTERS AND FILTER MEDIA FOR REMOVING PARTICLES FROM AIR - PART 1: CLASSIFICATION, PERFORMANCE, TESTING AND MARKING |
| 09/30190929 DC : 0 | BS ISO 29042-5 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 5: TEST BENCH METHOD FOR THE MEASUREMENT OF THE SEPARATION EFFICIENCY BY MASS OF AIR CLEANING SYSTEMS WITH UNDUCTED OUTLET |
| PD ISO/TR 12748:2015 | Natural Gas. Wet gas flow measurement in natural gas operations |
| 16/30346580 DC : 0 | BS EN 13771-2 - COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| DIN EN 1366-9:2008-08 | Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts |
| BS ISO 8573-4:2001 | Compressed air Test methods for solid particle content |
| BS ISO 13253:2017 | Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance |
| 08/30175518 DC : DRAFT SEP 2008 | BS EN 13141-2 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| PREN 13141-5 : DRAFT 2017 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES |
| DIN EN ISO 15970:2014-09 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
| PREN 13771-1 : DRAFT 2014 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
| BS ISO 5151:2017 | Non-ducted air conditioners and heat pumps. Testing and rating for performance |
| BS EN 16905-4:2017 | Gas-fired endothermic engine driven heat pumps Test methods |
| BS ISO 17089-1:2010 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| 06/30160085 DC : 0 | BS ISO 15970 - NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
| 17/30326689 DC : DRAFT MAY 2017 | BS EN ISO 10637 - DENTISTRY - CENTRAL SUCTION SOURCE EQUIPMENT |
| 14/30230935 DC : 0 | BS EN ISO 4126-11 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 11: PERFORMANCE TESTING |
| 01/714475 DC : DRAFT NOV 2001 | BS EN 14277 - VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - METHOD FOR AIRFLOW MEASUREMENT BY CALIBRATED SENSORS IN ATD/PLENUM BOXES |
| PD CLC/TS 50594:2015 | Tumble dryers for commercial use. Methods for measuring the performance |
| 08/30168462 DC : DRAFT APR 2008 | BS ISO 1217 - DISPLACEMENT COMPRESSORS - ACCEPTANCE TEST |
| 10/30216081 DC : 0 | BS ISO 17553 - ROOM FAN-COIL UNITS - TESTING AND RATING FOR PERFORMANCE |
| 04/30115060 DC : DRAFT JUN 2004 | EN 14175-6 - FUME CUPBOARDS - PART 6: VARIABLE AIR VOLUME FUME CUPBOARDS |
| BS EN 81-58:2003 | Safety rules for the construction and installation of lifts Examination and tests. Landing doors fire resistance test |
| BS EN ISO 15012-2:2008 | Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration Determination of the minimum air volume flow rate of captor hoods and nozzles |
| PREN 13053 : DRAFT 2017 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| BS ISO 2186:2007 | Fluid flow in closed conduits. Connections for pressure signal transmissions between primary and secondary elements |
| DIN 14811:2008-01 | FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| 14/30298580 DC : 0 | BS EN 16480 - PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS |
| PREN 12599 : DRAFT 2010 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| BS ISO 8178-2:2008 | Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions under field conditions |
| BS ISO TR 12767:1998 | Measurement of fluid flow by means of pressure-differential devices. Guidelines to the effect of departure from the specifications and operating conditions given in ISO 5167-1 |
| I.S. EN 15726:2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| DIN EN 1822-1:2011-01 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 1: CLASSIFICATION, PERFORMANCE TESTING, MARKING |
| 16/30318715 DC : DRAFT MAR 2016 | BS ISO 14955-2 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 2: METHODS FOR MEASURING ENERGY SUPPLIED TO MACHINE TOOLS AND MACHINE TOOL COMPONENTS |
| CSA C13256.1 : 2001 : R2016 | WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
| ISO 13253:2017 | Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance |
| UNI EN ISO 15112 : 2014 | NATURAL GAS - ENERGY DETERMINATION |
| PREN 1539 : DRAFT 2012 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| UNE-EN 15726:2012 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| S.R. CEN/TR 12101-4:2009 | SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
| DIN EN 12261:2007-07 | GAS METERS - TURBINE GAS METERS |
| ISO/TR 26762:2008 | Natural gas — Upstream area — Allocation of gas and condensate |
| BS EN ISO 5802 : 2008 | INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU |
| BS EN 15882-1 : 2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| I.S. EN 1822-4:2009 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 4: DETERMINING LEAKAGE OF FILTER ELEMENTS (SCAN METHOD) |
| BS ISO 5011 : 2014 | INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS - PERFORMANCE TESTING |
| I.S. EN ISO 18854:2015 | SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015) |
| EN 14175-3:2003 | Fume cupboards - Part 3: Type test methods |
| 17/30358936 DC : 0 | BS EN 1822-1 - HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 1: CLASSIFICATION, PERFORMANCE TESTING, MARKING |
| EN 15882-1:2011+A1:2017 | Extended application of results from fire resistance tests for service installations - Part 1: Ducts |
| UNI EN 1822-1 : 2010 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 1: CLASSIFICATION, PERFORMANCE TESTING, MARKING |
| DIN EN 1111:2015-07 (Draft) | SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 16145:2012 | SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION |
| S.R. CEN/TR 16478:2012 | SURVEILLANCE FROM FIRST COMMISSIONING ON MEASURING DEVICES USED IN NATURAL GAS SUPPLY TO THE INSTALLATIONS OF THE ACTIVITIES UNDER THE DIRECTIVE 2003/87/EC ESTABLISHING A SCHEME OF CO[2] EMISSIONS TRADING |
| AMCA 210 : 2016 | LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
| I.S. EN 15500:2008 | CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT |
| UNI EN 16145 : 2013 | SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION |
| UNI EN 1366-9 : 2008 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
| DIN EN 16905-4:2015-10 (Draft) | GAS-FIRED ENDOTHERMIC ENGINE DRIVEN HEAT PUMPS - PART 4: TEST METHODS |
| PREN 16480 : DRAFT 2017 | PUMPS - ROTODYNAMIC PUMPS - MINIMUM REQUIRED EFFICIENCY OF WATER PUMPS AND METHODS OF QUALIFICATION AND VERIFICATION |
| ONORM EN 1822-5 : 2011 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| EN 61591:1997/A12:2015 | HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE (IEC 61591:1997) |
| EN 1822-4:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method) |
| IEC 61121:2012 | Tumble dryers for household use - Methods for measuring the performance |
| EN 1822-2:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics |
| I.S. EN 13053:2006 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| I.S. EN 1822-2:2009 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTICS |
| BS EN 1822-4:2009 | High efficiency air filters (EPA, HEPA and ULPA) Determining leakage of filter elements (scan method) |
| I.S. EN 1822-1:2009 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 1: CLASSIFICATION, PERFORMANCE TESTING, MARKING |
| DIN EN 12215:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 12953-11:2003-12 | SHELL BOILERS - PART 11: ACCEPTANCE TESTS |
| DIN EN ISO 5167-2:2004-01 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003) |
| DIN EN ISO 5167-3:2004-01 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003) |
| DIN EN 1751:2014-06 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
| DIN EN 1366-2:2015-09 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN ISO 16890-3:2015-08 (Draft) | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| DIN EN 13771-1:2015-01 (Draft) | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
| DIN EN 13771-2:2016-11 (Draft) | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| DD ISO/TS 21220:2009 | Particulate air filters for general ventilation. Determination of filtration performance |
| BS EN 12599:2012 | Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| BS EN 12589:2001 | Ventilation for buildings. Air terminal units. Aerodynamic testing and rating of constant and variable rate terminal units |
| BS EN 13355 : 2004 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| BS EN ISO 10440-2:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free) |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 1093-6 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| I.S. EN 1366-1:2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| EN 1366-1:2014 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
| I.S. EN 13141-5:2004 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES |
| I.S. EN 1093-6:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| I.S. EN 817:2008 | SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS |
| I.S. EN ISO 9300:2005 | MEASUREMENT OF GAS FLOW BY MEANS OF CRITICAL FLOW VENTURI NOZZLES |
| I.S. EN ISO 7235:2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| DIN EN 14175-6:2006-08 | Fume cupboards - Part 6: Variable air volume fume cupboards |
| I.S. EN 12215:2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 1111:2017 | SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 1776:2016-05 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| EN 13141-5:2004 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls and roof outlet terminal devices |
| DIN EN 13053:2012-02 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS (INCLUDES AMENDMENT A1:2011) |
| I.S. EN 1751:2014 | VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
| ISO/TR 3313:1992 | Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes |
| DIN EN 13141-2:2010-12 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| I.S. EN 12599:2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| DIN EN 14511-3:2013-12 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 3: TEST METHODS |
| DIN EN 1366-1:2014-12 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 200:2008 | SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 13355:2005 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| I.S. EN 1366-2:2015 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| I.S. EN 1093-11:2001 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 11: DECONTAMINATION INDEX |
| I.S. EN 13141-2:2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| I.S. EN 13771-2:2017 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| I.S. EN 15091:2013 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| I.S. EN 13771-1:2016 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
| I.S. EN 13434:2006 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G, TYPE B |
| I.S. EN ISO 9906:2012 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| I.S. EN 1093-7:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| I.S. EN 1776:2015 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN 13433:2006 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G, TYPE A |
| DIN EN 1751:1999-01 | VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPERS AND VALVES |
| DIN EN ISO 7235:2010-01 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| VDI 2048 Blatt 1:2000-10 | Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals |
| DIN EN ISO 16890-3:2017-08 | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| BS 848-1:1997 | Fans for general purposes Performance testing using standardized airways |
| VDI 3986:2014-07 | Determination of efficiencies of conventional power stations |
| VDI 2044:2002-11 | Acceptance and performance tests on fans (VDI code of practice for fans) |
| BS 848-1(2007) : 2007 COR 2010 | INDUSTRIAL FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
| VDI 2048 Blatt 3:2012-05 | Uncertainties of measurement during acceptance tests on energy-conversion and power plants - Examples, especially preparation of acceptance tests of a gas and steam power plant |
| UNE-EN ISO 13349:2011 | Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
| 15/30275163 DC : DRAFT JAN 2015 | BS EN ISO 5167-5 - MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 5: CONE METERS |
| UNE-EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| UNE-EN 16211:2016 | Ventilation for buildings - Measurement of air flows on site - Methods |
| 11/30232917 DC : 0 | BS ISO 13579-1 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - METHOD OF MEASURING ENERGY BALANCE AND CALCULATING EFFICIENCY - PART 1: GENERAL METHODOLOGY |
| DIN EN 1366-10:2011-07 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| ISO/TR 15377:2018 | Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 |
| OIML R 140 : 2007 | MEASURING SYSTEMS FOR GASEOUS FUEL |
| 15/30321802 DC : 0 | BS EN 1111 - SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| ISO/TR 12748:2015 | Natural Gas Wet gas flow measurement in natural gas operations |
| 15/30321799 DC : 0 | BS EN 1287 - SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATIONS |
| CLC/TS 50594:2015 | Tumble dryers for commercial use - Methods for measuring the performance |
| I.S. EN 306:1997 | HEAT EXCHANGERS - METHODS OF MEASURING THE PARAMETERS NECESSARY FOR ESTABLISHING THE PERFORMANCE |
| 14/30313297 DC : 0 | BS EN 13771-1 - COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
| BS ISO 18740:2016 | Turbocompressors. Performance test code. Simplified acceptance test |
| 16/30326493 DC : 0 | BS EN ISO 14644-3 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
| DIN EN ISO 15970 E : 2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
| ISO 14955-2:2018 | Machine tools — Environmental evaluation of machine tools — Part 2: Methods for measuring energy supplied to machine tools and machine tool components |
| 08/30176852 DC : DRAFT APR 2008 | BS EN 1822-4 - HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 4: DETERMINING LEAKAGE OF FILTER ELEMENTS (SCAN METHOD) |
| 00/706276 DC : DRAFT MAR 2000 | ISO/DIS 5389 - TURBOCOMPRESSORS - PERFORMANCE TEST CODE |
| 08/30176845 DC : DRAFT APR 2008 | BS EN 1822-2 - HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTIC |
| CSA C13256.1:2001 | WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
| BS EN ISO 4064-2:2017 | Water meters for cold potable water and hot water Test methods |
| UNE-EN 61121:2013 | Tumble dryers for household use - Methods for measuring the performance |
| 14/30302515 DC : 0 | BS EN 14175-3 - FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
| DIN EN ISO 15112 E : 2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| BS 848-3(2001) : 2001 | FANS FOR GENERAL PURPOSE - PART 3: PERFORMANCE TESTING IN SITU |
| 14/30289271 DC : 0 | BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| ISO 8573-4:2001 | Compressed air Part 4: Test methods for solid particle content |
| UNI CEI EN ISO 4064-2 : 2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| BS ISO 8178-1:2017 | Reciprocating internal combustion engines. Exhaust emission measurement Test-bed measurement systems of gaseous and particulate emissions |
| ONORM Z 1263 : 2013 | SEPARATORS FOR COOLING LUBRICANTS - REQUIREMENTS AND CLASSIFICATION |
| UNI EN ISO 13349 : 2011 | FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES |
| BS EN ISO 5801:2017 | Fans. Performance testing using standardized airways |
| 11/30215951 DC : 0 | BS ISO 17089-2 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 2: METERS FOR INDUSTRIAL APPLICATIONS |
| BS EN 14511-3:2013 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Test methods |
| 12/30258755 DC : 0 | BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| EN ISO 5801:2017 | Fans - Performance testing using standardized airways (ISO 5801:2017) |
| DIN EN ISO 4064-2:2016-09 (Draft) | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
| 10/30235574 DC : 0 | BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| UNI EN 14277 : 2008 | VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - METHOD FOR AIRFLOW MEASUREMENT BY CALIBRATED SENSORS IN OR CLOSE TO ATD/PLENUM BOXES |
| 98/704586 DC : DRAFT FEB 1998 | PREN 13141-5 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES |
| 05/30132431 DC : DRAFT APR 2005 | EN 13771-2 - COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| 07/30113186 DC : 0 | BS ISO 8178-2 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS UNDER FIELD CONDITIONS |
| DIN EN 15096:2008-04 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 60312-1:2017 | VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1: DRY VACUUM CLEANERS - METHODS FOR MEASURING THE PERFORMANCE |
| 04/30122896 DC : DRAFT SEP 2004 | ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| 11/30253126 DC : 0 | BS EN 16282-9 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 9: CAPTURE AND CONTAINMENT PERFORMANCE OF EXTRACTION SYSTEMS - TEST METHODS |
| 16/30349000 DC : 0 | BS IEC 62885-4 ED 1.0 - SURFACE CLEANING APPLIANCES - PART 4: CORDLESS DRY VACUUM CLEANERS FOR HOUSEHOLD OR SIMILAR USE - METHODS FOR MEASURING THE PERFORMANCE |
| UNE-EN ISO 18854:2015 | Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015) |
| BS ISO 16494:2014 | Heat recovery ventilators and energy recovery ventilators. Method of test for performance |
| 15/30331519 DC : 0 | BS EN 15500-1 - CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
| DIN EN 1822-4:2011-01 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 4: DETERMINING LEAKAGE OF FILTER ELEMENTS (SCAN METHOD) |
| 13/30256250 DC : 0 | BS EN 60312-1-1 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1-1: CORDLESS DRY VACUUM CLEANERS - METHODS FOR MEASURING THE PERFORMANCE |
| BS ISO TR 12764:1997 | Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
| ISO 21904-3:2018 | Health and safety in welding and allied processes — Requirements, testing and marking of equipment for air filtration — Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices |
| UNI EN 15726 : 2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| 17/30345947 DC : 0 | BS EN ISO 21083-1 - TEST METHOD TO MEASURE THE EFFICIENCY OF AIR FILTRATION MEDIA AGAINST SPHERICAL NANOMATERIALS - PART 1: PARTICLE SIZE RANGE FROM 20 TO 500 NM |
| IEC 60312-1:2010+AMD1:2011 CSV | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| I.S. EN 1366-12:2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
| ISO 13579-1:2013 | Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 1: General methodology |
| BS ISO 15970 : 2008 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
| ISO 1217:2009 | Displacement compressors Acceptance tests |
| PREN 3703 : 200P1 | AEROSPACE SERIES - HEAT RELEASE RATE FOR MATERIALS AND PRODUCTS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - TEST METHOD |
| IEC PAS 63124:2017 | Tumble dryers for commercial use - Methods for measuring the performance |
| DIN EN 14511-3:2015-12 (Draft) | AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 3: TEST METHODS |
| I.S. EN ISO 27509:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012) |
| BS ISO 1217 : 2009 | DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS |
| ISO 10294-3:1999 | Fire resistance tests Fire dampers for air distribution systems Part 3: Guidance on the test method |
| BS EN 61591 : 1997 | HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE |
| ISO 5389:2005 | Turbocompressors — Performance test code |
| DIN EN 1366-12:2014-12 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
| ISO 29042-6:2010 | Safety of machinery Evaluation of the emission of airborne hazardous substances Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet |
| I.S. EN ISO 21904-3:2018 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 3: DETERMINATION OF THE CAPTURE EFFICIENCY OF ON-TORCH WELDING FUME EXTRACTION DEVICES (ISO 21904-3:2018) |
| UNE-EN 15091:2014 | Sanitary tapware - Electronic opening and closing sanitary tapware |
| OIML R 49-2 : 2013 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| 14/30303765 DC : 0 | BS EN 16282-9 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 9: CAPTURE AND CONTAINMENT PERFORMANCE OF EXTRACTION SYSTEMS - TEST METHODS |
| UNE-EN 14511-3:2014 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods |
| BS EN 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines. Model acceptance tests |
| EN 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
| BS EN ISO 13349:2010 | Fans — Vocabulary and definitions of categories (ISO 13349:2010) |
| BS EN 14175-3:2003 | Fume cupboards Type test methods |
| PREN 1751 : DRAFT 2011 | VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
| UNE-EN ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) |
| PREN 81-58 : DRAFT 2016 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST |
| ONORM EN 1366-12 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
| EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| EN 15500-1:2017 | Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5 |
| ISO 29463-4:2011 | High-efficiency filters and filter media for removing particles in air — Part 4: Test method for determining leakage of filter elements-Scan method |
| API 551 : 2016 | PROCESS MEASUREMENT |
| ISO 29463-3:2011 | High-efficiency filters and filter media for removing particles in air — Part 3: Testing flat sheet filter media |
| I.S. EN 15096:2008 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 14451:2005-08 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
| BS EN 1822-5:2009 | High efficiency air filters (EPA, HEPA and ULPA) Determining the efficiency of filter elements |
| DIN EN 1822-2:2011-01 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTICS |
| UNE-EN 1822-2:2010 | High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics |
| UNI EN 1822-2 : 2010 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTICS |
| UNI EN 1822-5 : 2010 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| DIN EN ISO 5167-4:2004-01 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003) |
| DIN EN 817:2008-09 | SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS |
| DIN EN 1093-6:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| DIN EN ISO 14644-3:2006-03 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
| DIN EN 1093-7:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| BS EN 14451:2005 | Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D, type A |
| UNE-EN 1751:2014 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
| ISO 10440-2:2001 | Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free) |
| ISO 5802:2001 | Industrial fans — Performance testing in situ |
| BS EN ISO 5167-2:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Orifice plates |
| UNE-EN 13141-2:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| BS EN ISO 9906:2012 | Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3 |
| DIN EN ISO 9906:2013-03 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| BS EN 13053 : 2006 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| I.S. EN ISO 5167-3:2003 | MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 3: NOZZLES AND VENTURI NOZZLES |
| UNI EN 1366-1 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| ASHRAE 126 : 2016 | METHOD OF TESTING HVAC AIR DUCTS |
| EN 15096:2008 | Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification |
| EN 14451:2005 | Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A |
| EN ISO 5167-3:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003) |
| ONORM EN 1366-1 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| ASHRAE 84 : 2013 | METHOD OF TESTING AIR-TO-AIR HEAT/ENERGY EXCHANGERS |
| I.S. EN 14451:2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
| ISO 8178-1:2020 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| UNE-EN 779:2013 | Particulate air filters for general ventilation - Determination of the filtration performance |
| DIN EN ISO 16890-2:2017-08 | Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016) |
| EN 1366-2:2015 | Fire resistance tests for service installations - Part 2: Fire dampers |
| EN ISO 5167-4:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003) |
| UNI EN 12599 : 2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| UNI EN 1366-8 : 2005 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 8: SMOKE EXTRACTION DUCTS |
| EN 14175-6:2006 | Fume cupboards - Part 6: Variable air volume fume cupboards |
| I.S. EN ISO 5167-2:2003 | MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 2: ORIFICE PLATES |
| UNI EN 1093-6 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| UNI EN 1751 : 2014 | VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
| UNI EN 12981 : 2009 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN ISO 9906 : 2012 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 |
| UNI EN 13141-2 : 2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| UNI EN ISO 7235 : 2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| UNI EN 15091 : 2014 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| UNI EN 817 : 2008 | SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS |
| UNI EN 1093-11 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 11: DECONTAMINATION INDEX |
| UNI EN 1093-7 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| UNI EN 200 : 2008 | SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| UNI EN 13355 : 2009 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| UNI EN 12215 : 2010 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN ISO 5167-4:2003 | MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 4: VENTURI TUBES |
| UNI EN ISO 15011-2 : 2010 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 2: DETERMINATION OF THE EMISSION RATES OF CARBON MONOXIDE (CO), CARBON DIOXIDE (CO[2]), NITROGEN MONOXIDE (NO) AND NITROGEN DIOXIDE (NO[2]) DURING ARC WELDING, CUTTING AND GOUGING |
| UNI EN 779 : 2012 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
| 09/30182871 DC : 0 | BS ISO 29463-3 - HIGH-EFFICIENCY FILTERS AND FILTER MEDIA FOR REMOVING PARTICLES FROM AIR - PART 3: TEST METHOD FOR FLAT SHEET FILTER MEDIA |
| UNE-EN 1366-10:2016 | Fire resistance tests for service installations - Part 10: Smoke control dampers |
| 17/30363142 DC : 0 | BS EN 61591 ED.2.0 - COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE |
| 09/30182868 DC : 0 | BS ISO 29463-2 - HIGH-EFFICIENCY FILTERS AND FILTER MEDIA FOR REMOVING PARTICLES FROM AIR - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT AND PARTICLE-COUNTING STATISTICS |
| BS EN ISO 15970:2014 | Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor |
| DIN EN 15726:2011-12 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions; German version EN 15726:2011 |
| ISO 18740:2016 | Turbocompressors Performance test code Simplified acceptance test |
| BS EN 15726:2011 | Ventilation for buildings. Air diffusion. Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| 12/30255590 DC : 0 | BS ISO 3008-2 - FIRE-RESISTANCE TESTS - PART 2: LIFT LANDING DOOR ASSEMBLIES |
| BS ISO 5389:2005 | Turbocompressors. Performance test code |
| HI 14.6 : 2016 | ROTODYNAMIC PUMPS FOR HYDRAULIC PERFORMANCE ACCEPTANCE TESTS |
| PD ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
| I.S. EN 12975-2:2006 | THERMAL SOLAR SYSTEMS AND COMPONENTS - SOLAR COLLECTORS - PART 2: TEST METHODS |
| BS ISO 15042:2017 | Multiple split-system air conditioners and air-to-air heat pumps. Testing and rating for performance |
| ISO 29463-2:2011 | High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics |
| ISO 29042-5:2010 | Safety of machinery Evaluation of the emission of airborne hazardous substances Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet |
| BS EN 60312-1:2017 | Vacuum cleaners for household use Dry vacuum cleaners. Methods for measuring the performance |
| BS EN 1366-9:2008 | Fire resistance tests for service installations Single compartment smoke extraction ducts |
| DIN EN ISO 15012-2:2008-06 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES |
| CEN/TR 12101-4:2009 | Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation |
| 07/30162717 DC : 0 | BS EN 15080-10 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 10: FIRE RESISTING DUCTS |
| BS 1042-1.6:1993 | Measurement of fluid flow in closed conduits. Pressure differential devices Method of measurement of pulsating fluid flow in a pipe, by means of orifice plates, nozzles or Venturi tubes |
| DIN EN 15116:2008-07 | VENTILATION IN BUILDINGS - CHILLED BEAMS - TESTING AND RATING OF ACTIVE CHILLED BEAMS |
| DIN EN 16445:2013-05 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - AERODYNAMIC TESTING AND RATING FOR MIXED FLOW APPLICATION: NON-ISOTHERMAL PROCEDURE FOR COLD JET |
| ISO/TS 11155-2:2002 | Road vehicles Air filters for passenger compartments Part 2: Test for gaseous filtration |
| ISO 2186:2007 | Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements |
| 09/30182882 DC : 0 | BS ISO 29463-5 - HIGH-EFFICIENCY FILTERS AND FILTER MEDIA FOR REMOVING PARTICLES FROM AIR - PART 5: TEST METHOD FOR DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| 05/30136105 DC : DRAFT JULY 2005 | ISO 15042 - MULTIPLE SPLIT-SYSTEM AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| BS ISO/TR 9464:1998 | Guide to the use of ISO 5167-1:1991 |
| ISO 5151:2017 | Non-ducted air conditioners and heat pumps — Testing and rating for performance |
| 12/30260007 DC : 0 | BS EN 15091 - SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| 15/30326260 DC : 0 | BS EN 16905-4 - GAS-FIRED ENDOTHERMIC ENGINE HEAT PUMPS - PART 4: TEST METHODS |
| ISO 8178-4:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications |
| 02/706744 DC : DRAFT MAY 2002 | ISO/DIS 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
| UNE-EN ISO 15970:2014 | Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008) |
| DIN 19207:2004-02 | Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories |
| BS EN 15116:2008 | Ventilation in buildings. Chilled beams. Testing and rating of active chilled beams |
| 03/316891 DC : DRAFT OCT 2003 | EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATINGS AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| 05/30141855 DC : DRAFT NOV 2005 | ISO 6944-1 - FIRE CONTAINMENT - ELEMENTS OF BUILDING CONSTRUCTION - PART 1: VENTILATION DUCTS |
| BS EN ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Cone meters |
| DIN EN 16211:2015-09 | Ventilation for buildings - Measurement of air flows on site - Methods |
| BS ISO 8178-4:2017 | Reciprocating internal combustion engines. Exhaust emission measurement Steady-state and transient test cycles for different engine applications |
| 12/30227451 DC : DRAFT AUG 2012 | BS EN 16480 - PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS |
| 12/30255198 DC : 0 | BS ISO 16494 - HEAT RECOVERY VENTILATORS AND ENERGY RECOVERY VENTILATORS - METHOD OF TEST FOR PERFORMANCE |
| BS EN 1366-12:2014 | Fire resistance tests for service installations Non-mechanical fire barrier for ventilation ductwork |
| 08/30176919 DC : DRAFT SEP 2008 | BS EN 1366-1 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| BS ISO TR 15377:1998 | Measurement of fluid flow by means of pressure differential devices. Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-1 |
| 02/103308 DC : DRAFT MAY 2002 | BS EN 14454 - DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION BACKFLOW PREVENTER DN 15 TO DN 32 INCLUSIVE - FAMILY H, TYPE A |
| 15/30284301 DC : 0 | BS ISO 13253 - DUCTED AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| I.S. EN 1366-9:2008 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
| 10/30216361 DC : 0 | BS ISO 29042-9 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: DECONTAMINATION INDEX |
| PD ISO/TR 12767:2007 | Measurement of fluid flow by means of pressure differential devices. Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167 |
| SAE J ISO 5011 : JUL 2002 | INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS - PERFORMANCE TESTING |
| 08/30176838 DC : DRAFT APR 2008 | BS EN 1822-1 - HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 1: CLASSIFICATION, PERFORMANCE TESTING, MARKING |
| ASHRAE 120 : 2017 | METHOD OF TESTING TO DETERMINE FLOW RESISTANCE OF HVAC DUCTS AND FITTINGS |
| 00/540664 DC : 0 | BS EN 12259-12 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEM - PART 12: SPRINKLER PUMPS |
| DIN EN 16146:2015-02 | Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification; German version EN 16146:2012+A1:2014 |
| DIN EN ISO 5167-5:2016-10 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) |
| CEI EN 60193 : 2000 | HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES MODEL ACCEPTANCE TESTS |
| ISO 10637:1999 | Dental equipment High- and medium-volume suction systems |
| ISO 12242:2012 | Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid |
| PREN 15091 : DRAFT 2012 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| UNI EN ISO 27509 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
| I.S. EN 16146:2012 | SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| NF EN ISO 13349 : 2010 | FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES |
| BS ISO 10294-1 : 1996 | FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 1: TEST METHOD |
| I.S. EN 15500-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
| I.S. EN ISO 5167-5:2016 | MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 5: CONE METERS (ISO 5167-5:2016) |
| I.S. EN ISO 4064-2:2017 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
| ISO 5011:2014 | Inlet air cleaning equipment for internal combustion engines and compressors Performance testing |
| EN 81-58:2018 | Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test |
| BS EN 61121:2013 | Tumble dryers for household use. Methods for measuring the performance |
| 17/30339487 DC : 0 | BS EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| EN 14511-3:2018 | Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 3: Test methods |
| BS ISO TR 3313:1998 | Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments |
| ISO 29463-5:2011 | High-efficiency filters and filter media for removing particles in air Part 5: Test method for filter elements |
| ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
| ISO 17089-2:2012 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications |
| IEC PAS 62611:2009 | Vacuum cleaners for commercial use - Methods for measuring performance |
| I.S. CEN TR 12101-4:2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
| IEC TS 62282-7-1:2017 | Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC) |
| DIN EN 1366-8:2004-10 | Fire resistance tests for service installations - Part 8: Smoke extraction ducts; German version EN 1366-8:2004 |
| EN 1822-2 : 2019 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTICS |
| UNE-EN 1822-5:2010 | High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements |
| DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| DIN EN ISO 15011-2:2010-03 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO<(Index)2>), nitrogen monoxide (NO) and nitrogen dioxide (NO<(Index)2>) during arc welding, cutting and gouging (ISO 15011-2:2009) |
| DIN EN 1093-1:2009-02 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS |
| UNE-EN 13053:2007 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| BS EN 1093-11 : 2001 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 11: DECONTAMINATION INDEX |
| ISO 9300:2005 | Measurement of gas flow by means of critical flow Venturi nozzles |
| ISO 13349:2010 | Fans — Vocabulary and definitions of categories |
| BS EN ISO 8178-2:1997 | Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions at site |
| BS EN 13141-5:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation Cowls and roof outlet terminal devices |
| BS EN 779:2012 | Particulate air filters for general ventilation. Determination of the filtration performance |
| ISO 9906:2012 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
| BS EN ISO 5167-4:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Venturi tubes |
| ISO 5167-4:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 4: Venturi tubes |
| ISO 16890-2:2016 | Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance |
| BS EN ISO 15011-2:2009 | Health and safety in welding and allied processes. Laboratory method for sampling fume and gases Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging |
| ISO 5167-3:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 3: Nozzles and Venturi nozzles |
| IEC 61591:1997+AMD1:2005 CSV | Household range hoods - Methods for measuring performance |
| ISO 16890-3:2016 | Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured |
| BS EN 1366-1:2014 | Fire resistance tests for service installations Ventilation ducts |
| UNE-EN 1776:2017 | Gas infrastructure - Gas measuring systems - Functional requirements |
| 07/30113225 DC : 0 | BS ISO 21220 - PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
| BS EN 1776:2015 | Gas infrastructure. Gas measuring systems. Functional requirements |
| BS EN ISO 14644-3:2005 | Cleanrooms and associated controlled environments Test methods |
| UNE-EN 1366-1:2016 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
| ISO 4064-2:2014 | Water meters for cold potable water and hot water Part 2: Test methods |
| BS EN 1111:2017 | Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification |
| BS EN 12975-2:2006 | Thermal solar systems and components. Solar collectors Test methods |
| UNI EN 13053 : 2011 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| BS EN 14124:2004 | Inlet valves for flushing cisterns with internal overflow |
| UNE-EN ISO 7235:2010 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| 09/30200844 DC : 0 | BS EN 779 - PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
| ISO 18854:2015 | Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions |
| ISO/TS 21220:2009 | Particulate air filters for general ventilation Determination of filtration performance |
| ISO 15011-2:2009 | Health and safety in welding and allied processes Laboratory method for sampling fume and gases Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging |
| UNE-EN 13771-1:2017 | Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors |
| ISO 7235:2003 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss |
| DIN EN ISO 9300:2005-11 | Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005) |
| ISO 15012-2:2008 | Health and safety in welding and allied processes Requirements, testing and marking of equipment for air filtration Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles |
| ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters |
| ISO 5167-2:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates |
| BS EN 14705:2005 | Heat exchangers. Method of measurement and evaluation of thermal performances of wet cooling towers |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| 10/30211683 DC : 0 | BS EN ISO 29461-1 - AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS |
| BS EN 1366-8:2004 | Fire resistance tests for service installations Smoke extraction ducts |
| 14/30268894 DC : 0 | BS EN ISO 16890-2 - AIR FILTERS FOR GENERAL VENTILATION - PART 2: MEASUREMENT OF FRACTIONAL EFFICIENCY AND AIR FLOW RESISTANCE |
| DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
| BS EN 1093-7 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| UNE-EN 13141-6:2015 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling |
| ONORM EN 13053 : 2011 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| BS EN 14277:2006 | Ventilation for buildings. Air terminal devices. Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
| BS EN 1287:2017 | Sanitary tapware. Low pressure thermostatic mixing valves. General technical specification |
| BS EN 14452:2005 | Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20. Family D, t ype B |
| BS EN 13434:2006 | Devices to prevent pollution by backflow of potable water. Mechanical disconnector, hydraulic actuated. Family G, type B |
| UNE-EN 1366-2:2015 | Fire resistance tests for service installations - Part 2: Fire dampers |
| ISO 15970:2008 | Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor |
| DIN EN 14455:2005-08 | Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B |
| EN 24006:1993 | Measurement of fluid flow in closed conduits - Vocabulary and symbols (ISO 4006:1991) |
| EN 16211:2015 | Ventilation for buildings - Measurement of air flows on site - Methods |
| EN ISO 16890-2:2016 | Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016) |
| EN ISO 10440-2:2001 | Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001) |
| EN 14455:2005 | Devices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B |
| EN 15726:2011 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| EN 14277:2006 | Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
| EN 15500:2008 | Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment |
| EN ISO 15970:2014 | Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008) |
| EN 1751:2014 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| EN 1366-12:2014 | Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork |
| EN ISO 4064-2:2017 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
| EN 1366-8:2004 | Fire resistance tests for service installations - Part 8: Smoke extraction ducts |
| EN ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) |
| EN ISO 21904-3:2018 | Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO 21904-3:2018) |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| EN 15091:2013 | Sanitary tapware - Electronic opening and closing sanitary tapware |
| EN 15116:2008 | Ventilation in buildings - Chilled beams - Testing and rating of active chilled beams |
| EN 1366-9:2008 | Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts |
| EN 14124:2004 | Inlet valves for flushing cisterns with internal overflow |
| EN 13771-1:2016 | Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors |
| EN ISO 9906:2012 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012) |
| EN 200:2008 | Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification |
| EN ISO 9300:2005 | Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005) |
| EN 14705:2005 | Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers |
| EN 14454:2005 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A |
| EN 14452:2005 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B |
| EN 1366-10:2011+A1:2017 | Fire resistance tests for service installations - Part 10: Smoke control dampers |
| EN 306:1997 | Heat exchangers - Methods of measuring the parameters necessary for establishing the performance |
| EN 16445:2013 | Ventilation for buildings - Air diffusion - Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet |
| EN 13771-2:2017 | Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units |
| EN ISO 7235:2009 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| EN ISO 18854:2015 | Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015) |
| EN 817:2008 | Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications |
| EN ISO 8178-1 : 1996 | RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
| EN ISO 13349:2010 | Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
| EN ISO 16890-3:2016 | Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016) |
| EN ISO 15012-2:2008 | Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles (ISO 15012-2:2008) |
| EN ISO 14644-3:2005 | Cleanrooms and associated controlled environments - Part 3: Test methods (ISO 14644-3:2005) |
| EN ISO 15011-2:2009 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging (ISO 15011-2:2009) |
| EN 16146:2012+A1:2014 | Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification |
| EN 14367:2005 | Non controllable backflow preventer with different pressure zones - Family C, type A |
| EN 14453:2005 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C |
| EN ISO 5167-2:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003) |
| ISO 3008-2:2017 | Fire-resistance tests — Part 2: Lift landing door assemblies |
| I.S. EN 60193:2000 | HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - MODEL ACCEPTANCE TESTS (IEC 60193:1999) |
| 12/30271673 DC : 0 | BS EN 14511-3 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 3: TEST METHODS |
| 01/562316 DC : DRAFT JULY 2001 | BS EN ISO 7235 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| UNI EN ISO 15012-2 : 2008 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES |
| 15/30328750 DC : 0 | BS EN 14511-3 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS FOR SPACE HEATING AND COOLING AND PROCESS CHILLERS, WITH ELECTRICALLY DRIVEN COMPRESSORS - PART 3: TEST METHODS |
| DD ISO/TS 11155-2:2002 | Road vehicles. Air filters for passenger compartments Test for gaseous filtration |
| 10/30240340 DC : 0 | BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| ASHRAE 51 : 2016 | LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
| PD CEN/TR 15500-2:2016 | Energy Performance of Buildings. Control for heating, ventilating and air-conditioning applications Accompanying TR prEN 15500-1:2015. Modules M3-5,M4-5,M5-5 |
| 16/30331280 DC (published 2016-04) | BS ISO 3008-2. Fire-resistance tests. Part 2. Lift landing door assemblies |
| PREN 1111 : DRAFT 2015 | SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| BS EN 15500-1:2017 | Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5 |
| BS ISO 10294-3:1999 | Fire-resistance tests. Fire dampers for air distribution systems Guidance on the test method |
| BS EN ISO 18854:2015 | Small craft. Reciprocating internal combustion engines exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions |
| BS ISO 12242:2012 | Measurement of fluid flow in closed conduits. Ultrasonic transit-time meters for liquid |
| UNI EN 15116 : 2008 | VENTILATION IN BUILDINGS - CHILLED BEAMS - TESTING AND RATING OF ACTIVE CHILLED BEAMS |
| UNE-EN 1822-1:2010 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| 15/30284304 DC : 0 | BS ISO 15042 - MULTIPLE SPLIT-SYSTEM AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| UNI EN 1366-12 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
| 13/30280712 DC : 0 | BS EN 1111 - SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| PD ISO/TR 11583:2012 | Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits |
| I.S. EN 16905-4:2017 | GAS-FIRED ENDOTHERMIC ENGINE DRIVEN HEAT PUMPS - PART 4: TEST METHODS |
| PREN 1822-1 : DRAFT 2017 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 1: CLASSIFICATION, PERFORMANCE TESTING, MARKING |
| UNI EN 1366-10 : 2011 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| UNI EN 15500 : 2008 | CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT |
| 15/30275843 DC : 0 | BS ISO 18740 - TURBOCOMPRESSORS - PERFORMANCE TEST CODE - SIMPLIFIED ACCEPTANCE TEST |
| 16/30334062 DC : 0 | BS ISO 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT SYSTEMS OF GASEOUS AND PARTICULATE EMISSIONS |
| ANSI/AHRI/ASHRAE ISO 13256-1 : 1998 : R2012 | WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
| 17/30356728 DC : 0 | BS EN 12261 - GAS METERS - TURBINE GAS METERS |
| UNE-EN ISO 4064-2:2015 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
| 17/30365068 DC : 0 | BS EN 14175-3 - FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
| 13/30284324 DC : 0 | BS EN ISO 18854 - SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
| UNE-EN 1366-12:2015 | Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork |
| BS EN 15096:2008 | Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification |
| 08/30176855 DC : DRAFT APR 2008 | BS EN 1822-5 - HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| PREN 12261 : DRAFT 2017 | GAS METERS - TURBINE GAS METERS |
| ISO/TR 12764:1997 | Measurement of fluid flow in closed conduits Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
| ANSI/AHRI/ASHRAE ISO 13256-1:1998 | WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
| 09/30190932 DC : 0 | BS ISO 29042-6 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: TEST BENCH METHOD FOR THE MEASUREMENT OF THE SEPARATION EFFICIENCY BY MASS OF AIR CLEANING SYSTEMS WITH DUCTED OUTLET |
| 05/30136071 DC : DRAFT JULY 2005 | ISO 13253 - DUCTED AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| I.S. EN ISO 5801:2017 | FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS (ISO 5801: 2017) |
| DIN EN ISO 13349:2012-07 | Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
| NF ISO 1217 : 2009 AMD 1 2016 | DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS |
| ISO 17089-1:2010 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
| UNI EN ISO 15970 : 2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
| NF EN 61591 : 2000 AMD 11 2017 | HOUSEHOLD RANGE HOODS - METHODS FOR MEASURING PERFORMANCE |
| UNE-EN 16145:2014 | Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification |
| DIN EN ISO 15112:2014-09 | Natural gas - Energy determination (ISO 15112: 2011) |
| I.S. EN 16445:2013 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - AERODYNAMIC TESTING AND RATING FOR MIXED FLOW APPLICATION: NON-ISOTHERMAL PROCEDURE FOR COLD JET |
| UNI EN 16146 : 2014 | SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 15882-1:2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
| PREN 13771-2 : DRAFT 2016 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| ISO 19970:2017 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Metering of gas as fuel on LNG carriers during cargo transfer operations |
| 17/30367211 DC : 0 | BS EN 16480 - PUMPS - ROTODYNAMIC PUMPS - MINIMUM REQUIRED EFFICIENCY OF WATER PUMPS AND METHODS OF QUALIFICATION AND VERIFICATION |
| S.R. CLC/TS 50594:2015 | TUMBLE DRYERS FOR COMMERCIAL USE - METHODS FOR MEASURING THE PERFORMANCE |
| ISO 11155-2:2009 | Road vehicles — Air filters for passenger compartments — Part 2: Test for gaseous filtration |
| EN 60312-1:2017 | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| ISO 8178-11:2006 | Reciprocating internal combustion engines Exhaust emission measurement Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions |
| ISO 16345:2014 | Water-cooling towers — Testing and rating of thermal performance |
| EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| I.S. EN ISO 5802:2008 | INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU (ISO 5802:2001) |
| ISO 8178-2:2008 | Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions |
| I.S. EN 15116:2008 | VENTILATION IN BUILDINGS - CHILLED BEAMS - TESTING AND RATING OF ACTIVE CHILLED BEAMS |
| ISO/TR 11583:2012 | Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits |
| DIN EN 13141-5:2005-01 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls and roof outlet terminal devices |
| ISO 14644-3:2005 | Cleanrooms and associated controlled environments Part 3: Test methods |
| BS EN ISO 9300:2005 | Measurement of gas flow by means of critical flow Venturi nozzles |
| BS EN 1366-2:2015 | Fire resistance tests for service installations Fire dampers |
| BS EN 200:2008 | Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification |
| 12/30263512 DC : 0 | BS EN ISO 9806 - SOLAR ENERGY - SOLAR THERMAL COLLECTORS - TEST METHODS |
| BS EN 13771-1:2016 | Compressors and condensing units for refrigeration. Performance testing and test methods Refrigerant compressors |
| BS EN 12953-11:2003 | Shell boilers Acceptance tests |
| ISO 27509:2012 | Petroleum and natural gas industries Compact flanged connections with IX seal ring |
| BS EN 1286:1999 | Sanitary tapware. Low pressure mechanical mixing valves. General technical specification |
| BS EN 14455:2005 | Devices to prevent pollution by backflow of potable water. Pressurised air inlet valves DN 15 to DN 50. Family L, type A and type B |
| BS EN 13141-6:2014 | Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust ventilation system packages used in a single dwelling |
| BS EN 13771-2:2017 | Compressors and condensing units for refrigeration. Performance testing and test methods Condensing units |
| BS EN 1751:2014 | Ventilation for buildings. Air terminal devices. Aerodynamic testing of damper and valves |
| BS EN 14175-6:2006 | Fume cupboards Variable air volume fume cupboards |
| BS EN 13433:2007 | Devices to prevent pollution by backflow of potable water. Mechanical disconnector, direct actuated. Family G, type A |
| EN 61121:2013 | Tumble dryers for household use - Methods for measuring the performance |
| EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
| EN 13141-6:2014 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling |
| EN 13434:2006 | Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B |
| DIN EN 13771-1:2017-04 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
| DIN EN 14454:2005-08 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A |
| EN 1093-7:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
| EN 1093-11:2001+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index |
| DIN EN 14452:2005-08 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B; German version EN 14452:2005 |
| DIN EN 14124:2005-02 | Inlet valves for flushing cisterns with internal overflow |
| DIN EN 779:2012-10 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
| DIN EN 14277:2006-11 | Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
| CEN/TR 15500-2:2016 | Energy Performance of Buildings - Control for heating, ventilating and air-conditioning applications — Part 2: Accompanying TR prEN 15500-1:2015 - Modules M3-5,M4-5,M5-5 |
| DIN EN 12975-2:2006-06 | THERMAL SOLAR SYSTEMS AND COMPONENTS - SOLAR COLLECTORS - PART 2: TEST METHODS |
| ASME PTC51 : 2011 : R2016 | GAS TURBINE INLET AIR-CONDITIONING EQUIPMENT - PERFORMANCE TEST CODES |
| I.S. EN 1366-8:2004 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 8: SMOKE EXTRACTION DUCTS |
| UNE-EN 16146:2013 | Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification |
| PIP PCEFL001 : 2017 | FLOW MEASUREMENT GUIDELINES |
| ASME PTC51 : 2011 | GAS TURBINE INLET AIR-CONDITIONING EQUIPMENT - PERFORMANCE TEST CODES |
| ONORM EN 1751 : JUN 2014 | VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
| ISO 5167-3:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 3: Nozzles and Venturi nozzles |
| ISO 5167-4:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 4: Venturi tubes |
| ISO/TR 5168:1998 | Measurement of fluid flow Evaluation of uncertainties |
| ISO 5167-2:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates |
| ISO/TR 3313:1998 | Measurement of fluid flow in closed conduits Guidelines on the effects of flow pulsations on flow-measurement instruments |
| ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
| ISO 4006:1991 | Measurement of fluid flow in closed conduits — Vocabulary and symbols |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.