EN 10028-3:2017
Current
Current
The latest, up-to-date edition.
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Published date
26-07-2017
Publisher
Sorry this product is not available in your region.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Tolerances on dimensions
5 Calculation of mass
6 Classification and designation
7 Information to be supplied by the purchaser
8 Requirements
9 Inspection
10 Sampling
11 Test methods
12 Marking
Annex A (normative) - Evaluation of resistance
to hydrogen induced cracking
Annex B (informative) - Information on welding
Annex C (informative) - Changes to the previous
version EN 10028-3:2009
Annex ZA (informative) - Relationship between
this European Standard and the Essential
Requirements of Directive 2014/68/EU
aimed to be covered
Bibliography
This European Standard specifies requirements for flat products for pressure equipment made of weldable fine grain steels as specified in Table 1.NOTE 1Fine grain steels are understood as steels with a ferritic grain size of 6 or finer when tested in accordance with EN ISO 643.The requirements and definitions of EN 10028-1:2017 also apply.NOTE 2Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this European Standard (Part 1 and the other relevant part of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done.
| Committee |
CEN/TC 459/SC 7
|
| DevelopmentNote |
Supersedes EURONORM 28. (07/2004) Supersedes PREN 10028-3. (07/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 10028-3:2010 | Identical |
| NF EN 10028-3 : 2017 | Identical |
| I.S. EN 10028-3:2017 | Identical |
| NS EN 10028-3 : 2017 | Identical |
| NEN EN 10028-3 : 2017 | Identical |
| NBN EN 10028-3 : 2009 | Identical |
| SN EN 10028-3 : 2009 | Identical |
| PN EN 10028-3 : 2017 | Identical |
| UNE-EN 10028-3:2017 | Identical |
| BS EN 10028-3:2017 | Identical |
| UNI EN 10028-3 : 2009 | Identical |
| UNI EN 10028-3:2017 | Identical |
| DIN 17102-10:1989-06 (Draft) | Similar to |
| DIN EN 10028-3:2017-10 | Identical |
| BS EN 10253-2:2007 | Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements |
| BS EN 1708-3:2012 | Welding. Basic weld joint details in steel Clad, buttered and lined pressurized components |
| PREN 12493 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
| 10/30216705 DC : 0 | BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN 4632-003 : 2011 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| 16/30338590 DC : 0 | BS EN 10164 - STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
| 10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
| DIN EN 1708-3:2012-05 | Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components |
| 16/30338096 DC : 0 | BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 09/30156692 DC : 0 | BS EN 10029 - HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE |
| PREN 10051 : DRAFT 2009 | HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
| DIN EN 10048:1996-10 | HOT-ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
| PREN 4632-003 : DRAFT 2008 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| I.S. EN 14638-3:2010 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS |
| PREN 303-1 : DRAFT 2016 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| BS EN 14917 : 2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| I.S. EN 13322-1:2003 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| EN 14917:2009+A1:2012 | Metal bellows expansion joints for pressure applications |
| I.S. EN 12493:2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| NF EN 12542 : 2011 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| BS EN 13480-2:2017 | Metallic industrial piping Materials |
| DIN EN 1759-1:2005-02 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| BS EN 14208:2004 | Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction |
| BS EN 13445-4 : 2014 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| DIN EN 14893:2014-09 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| BS EN 303-5:2012 | Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
| I.S. EN 14276-1:2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| BS EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| BS EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape |
| EN 12952-2:2011 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| EN 12952-14:2004 | Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| DIN EN 12952-14:2004-09 | Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution |
| I.S. EN 12284:2003 | REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
| EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| EN 12953-2:2012 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| PREN 14015-1 : DRAFT 2000 | SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS |
| DIN EN 14917:2012-06 | Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
| DIN EN 10253-2:2008-09 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| EEMUA 159 : 2014 | ABOVE GROUND FLAT BOTTOMED STORAGE TANKS - A GUIDE TO INSPECTION, MAINTENANCE AND REPAIR |
| 13/30248693 DC : 0 | BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| 04/30116684 DC : DRAFT JUL 2004 | EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LPG METALLIC PRESSURE DRUMS WITH A CAPACITY BETWEEN (150 AND 1 000 LITRES) |
| UNI EN 1708-3 : 2012 | WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS |
| 17/30351224 DC : 0 | BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| 11/30249105 DC : 0 | BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| PREN 10164 : DRAFT 2016 | STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
| 03/105149 DC : DRAFT MAR 2003 | PREN 14620-2 - DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 2: METALLIC COMPONENTS |
| 09/30200092 DC : 0 | BS EN 10051 - HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
| PREN 10029 : DRAFT 2009 | HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE |
| DIN EN 14893 E : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| PREN 16510-1 : DRAFT 2013 | RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 16668:2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
| S.R. CEN ISO TR 20172:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| BS EN 13445-2 : 2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| EN 13445-4 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| I.S. EN 10253-2:2007 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 12284:2004-01 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| DIN EN 303-5:2012-10 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| UNE-EN 12542:2011 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
| I.S. EN 12542:2010 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| I.S. EN 10029:2010 | HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE |
| DIN EN 12542:2010-12 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| DIN EN 10028-1:2017-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 12953-2:2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| I.S. EN 12952-2:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| I.S. EN 14893:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| I.S. EN 303-1:2017 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 303-5:2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 10028-1:2017 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 12493:2017-01 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| UNI EN 12493 : 2014 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| UNI EN 10029 : 2011 | Hot rolled steel sheets with a thickness greater than or equal to 3 mm - Tolerances on dimensions and shape |
| NF EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| ASME PV CODE 2A : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END) |
| NFL 06 380-21 : 2003 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 21: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| PREN 14620-2 : DRAFT 2003 | DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREE C AND -165 DEGREE C - PART 2: METALLIC COMPONENTS |
| UNI EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| 08/30180502 DC : DRAFT JUNE 2008 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| 13/30266592 DC : 0 | BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| BS EN 14638-3:2010 | Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded carbon steel cylinders made to a design justified by experimental methods |
| 15/30299570 DC : 0 | BS ISO 7195 - NUCLEAR ENERGY - PACKAGINGS FOR THE TRANSPORT OF URANIUM HEXAFLUORIDE (UF[6]) |
| CEN ISO/TR 20172:2009 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
| 00/714962 DC : DRAFT OCT 2000 | PREN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOF STEEL VALVE SHELLS |
| UNI EN 303-5 : 2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| 07/30165594 DC : DRAFT AUG 2007 | BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL TANKS FOR LIQUEFIED PETROLEUM GAS (LPG) - ROAD TANKERS DESIGN AND MANUFACTURE |
| 17/30347443 DC : DRAFT JUN 2017 | BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| 08/30167676 DC : DRAFT JAN 2008 | BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| 11/30236583 DC : 0 | BS EN 14917:2009/A1 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| 04/30118252 DC : DRAFT AUG 2004 | EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| 00/715206 DC : DRAFT OCT 2000 | PREN 14015-1 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS |
| UNI EN 12516-1 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| ONORM EN 13322-1 : 2006 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| UNE-EN 10029:2011 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| I.S. EN 4632-003:2010 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| PREN 12542 : DRAFT 2016 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| ISO 7195:2005 | Nuclear energy Packaging of uranium hexafluoride (UF6) for transport |
| I.S. EN 14917:2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| DIN EN 14276-1:2011-05 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| BS EN 13322-1 : 2003 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| BS EN 1503-1:2000 | Valves. Materials for bodies, bonnets and covers Steels specified in European Standards |
| EN 14276-1:2020 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| EEMUA 190 : 2000 | GUIDE FOR THE DESIGN, CONSTRUCTION AND USE OF MOUNDED HORIZONTAL CYLINDRICAL VESSELS FOR PRESSURISED STORAGE OF LPG AT AMBIENT TEMPERATURE |
| UNI EN 12542 : 2010 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 MUE - DESIGN AND MANUFACTURE |
| UNI EN 14276-1 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| UNE-EN 13445-4:2015 | Unfired pressure vessels - Part 4: Fabrication |
| EN 12542:2010 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
| EN 14208:2004 | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
| UNI EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN 14893 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 10051 : 2011 | CONTINUOUSLY HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
| UNI EN 12953-2 : 2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| 04/30125076 DC : 0 | EN 10111 - CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 4632-003:2010 | Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels |
| DIN EN 303-1:2016-07 (Draft) | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| 99/707159 DC : DRAFT APR 99 | BS PREN 13480-2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
| I.S. EN 13445-2:2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| I.S. EN 1708-3:2012 | WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS |
| DIN EN 14638-3:2012-06 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods (includes Corrigendum AC:2012) |
| UNI EN 14917 : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| UNI EN 14638-3 : 2010 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS |
| API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| BS EN 12516-1 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| UNE-EN 12516-1:2016 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| 16/30326248 DC : 0 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| 13/30271701 DC : 0 | BS EN 16510-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| DIN EN 12493:2014-03 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| PREN 14893 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| DIN EN 13322-1:2006-05 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 12480:2018 | Gas meters - Rotary displacement gas meters |
| I.S. EN 12480:2018 | GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| BS EN 13480-2:2017+A3:2018 | Metallic industrial piping Materials |
| I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| DIN EN 14015:2005-02 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| DIN EN 10029:2011-02 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| DIN EN 14208:2004-05 | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
| BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
| BS EN 12542:2010 | LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m<sup>3</sup>. Design and manufacture |
| BS EN 14620-2:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Metallic components |
| UNE-EN 12952-2:2012 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| UNE-EN 12953-2:2013 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN 12952-14:2004 | Water-tube boilers and auxiliary installations Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
| BS EN 10048:1997 | Hot rolled narrow steel strip. Tolerances on dimensions and shape |
| BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
| EN 14276-1:2006+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| BS EN 14276-1 : 2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| BS EN 1759-1:2004 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24 |
| UNE-EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| BS EN 12953-2:2012 | Shell boilers Materials for pressure parts of boilers and accessories |
| EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
| EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| EN 16668:2016+A1:2018 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
| EN 1503-1:2000 | Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
| EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EN 14620-2:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components |
| EN 303-1:2017 | Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking |
| EN 1708-3:2012 | Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components |
| EN 4632-003:2010 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels |
| EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
| PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| UNE-EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| BS EN 12493 : 2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| I.S. EN 14075:2002 | STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] AND FOR INSTALLATION UNDERGROUND - DESIGN AND MANUFACTURE |
| 08/30184300 DC : DRAFT SEP 2008 | BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| PD CR 10313:2000 | Classification of grades of steel. Examples of classification related to European standards |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| S.R. CEN ISO/TR 20172:2021 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
| PD CEN ISO/TR 20172:2009 | Welding. Grouping systems for materials. European materials |
| NF EN 14638-3 : 2010 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL, CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS |
| UNE-EN 14638-3:2011 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods |
| PD 6588:1996 | Welding. Guidelines for a grouping system for welding purposes |
| DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| PREN 14276-1 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| KTA 3205.2 : 2015 COR 2016 | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
| I.S. CEN ISO TR 20172:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| UNE-EN 12493:2014 | LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture |
| UNE-EN 13445-2:2015 | Unfired pressure vessels - Part 2: Materials |
| I.S. EN 12516-1:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 12516-1:2015-01 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN 14917:2011 | Metal bellows expansion joints for pressure applications |
| S.R. CR 10313:2000 | CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS |
| DIN EN 12953-2:2012-05 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories; German version EN 12953-2:2012 |
| DIN EN 12952-2:2011-10 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN 14893:2014 | LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| BS EN 12952-2:2011 | Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
| UNE-EN 303-5:2013 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| BS EN 10028-1:2017 | Flat products made of steels for pressure purposes General requirements |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| BS EN 303-1:2017 | Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
| ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
| DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| EN 12284:2003 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| ONORM EN 10253-2 : 2008 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| CR 10313:2000 | Classification of grades of steel - Examples of classification related to European Standards |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| DIN EN 14075:2003-01 | STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] AND FOR INSTALLATION UNDERGROUND - DESIGN AND MANUFACTURE |
| UNE-EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| UNE-EN 14276-1:2007 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| EN 10314:2016 | Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| EN 1011-1:2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
| EN 10229 : 1998 | EVALUATION OF RESISTANCE OF STEEL PRODUCTS TO HYDROGEN INDUCED CRACKING (HIC) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.