EN 10045-1 : 1990
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
Superseded date
01-10-2010
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
Foreword
1 Object and field of application
2 References
3 Principle
4 Designations
5 Test pieces
6 Testing machine
7 Test requirements
8 Test report
Annex A List of national standards corresponding to the
reference European Standard in preparation
Explains the Charpy impact test for metallic materials. For certain particular metallic materials and applications, the Charpy impact test may be the subject of specific standards and particular requirements. Covers references, principle, designations, test pieces, testing machine, test requirements and test report.
| Committee |
ECISS/TC 1A
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SNV DIN EN 10045-1 : 1991 | Identical |
| NF EN 10045-1 : 1990 | Identical |
| NBN EN 10083-1 : 2007 | Corresponds |
| BS EN 10045-1:1990 | Identical |
| UNE 7475-1:1992 | Similar to |
| ISO 83:1976 | Similar to |
| PN EN 10045-1 : 1994 | Identical |
| UNI EN 10045-1 : 1992 | Identical |
| NBN EN 288-9 : 1999 | Identical |
| ISO 148:1983 | Similar to |
| NEN EN 10045-1 : 1990 | Identical |
| I.S. EN 10045-1:1991 | Identical |
| NS EN 10045-1 : 1ED 1990 | Identical |
| NBN EN 10045-1 : 1992 | Identical |
| DIN EN 10045-1:1991-04 | Identical |
| UNI EN 13155 : 2009 | CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| NFA 36 218 : 1988 | IRON AND STEEL - PLATE FOR BOILERS AND PRESSURE VESSELS - STAINLESS STEEL PLATE WITH SPECIAL CORROSION RESISTANCE PROPERTIES |
| 99/709740 DC : DRAFT JUN 99 | PREN 10253-2 - BUTT WELDING PIPE FITTINGS - PART 2: WROUGHT CARBON AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| UNE-EN 10088-5:2010 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| UNE-EN 10343:2010 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| BS EN 4700-001:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
| BS EN 10253-2:2007 | Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements |
| 08/30184309 DC : DRAFT SEP 2008 | BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| PREN 10217-6 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| 11/30235004 DC : 0 | BS EN 13155 - CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS |
| 03/302503 DC : DRAFT FEB 2003 | BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| I.S. EN 12079-1:2006 | OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING |
| 09/30200834 DC : 0 | BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| 09/30207517 DC : 0 | BS EN 10217-6 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN 1252-2:2001 | CRYOGENIC VESSELS - MATERIALS - PART 2: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BETWEEN -80 DEGREE C AND -20 DEGREE C |
| I.S. EN 10213-1:1996 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| 03/105150 DC : DRAFT MAR 2003 | PREN 14620-3 - DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 3: CONCRETE COMPONENTS |
| 99/707159 DC : DRAFT APR 99 | BS PREN 13480-2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| PREN 1564 : DRAFT 2009 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON |
| PREN 14141 : DRAFT 2011 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| 09/30207505 DC : 0 | BS EN 10217-2 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| UNI EN 4700-006 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| 05/30129551 DC : 0 | PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| UNE-EN 1993-1-10:2013 | Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties |
| 08/30190326 DC : DRAFT DEC 2008 | BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| I.S. CEN TS 13001-3-1:2005 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| EN 10085:2001 | Nitriding steels - Technical delivery conditions |
| DIN EN 14638-3:2012-06 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods (includes Corrigendum AC:2012) |
| 12/30258463 DC : 0 | BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| 09/30207508 DC : 0 | BS EN 10217-3 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| 09/30200840 DC : 0 | BS EN 1564 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON |
| 16/30322067 DC : 0 | BS EN 13001-3-1:2012 AMD 2 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| BS EN 10343:2009 | Steels for quenching and tempering for construction purposes. Technical delivery conditions |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| I.S. EN 10083-1:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10340 : 2008 | STEEL CASTINGS FOR STRUCTURAL USES |
| BS EN 10083-3 : 2006-08 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| PREN 4700-005 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| I.S. EN 10217-3:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| PREN 4700-006 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| NFA 32 060 : 2001 | FOUNDRY PRODUCTS - CAST STEEL AND NICKEL ALLOY CASTINGS FOR PUMPS, VALVES AND FITTINGS (ENCLOSURES AND INTERNAL COMPONENTS) |
| I.S. EN 14638-3:2010 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS |
| EN 13411-7:2006+A1:2008 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
| BS EN 14399-7:2007 | High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut assemblies |
| S.R. CEN TS 13001-3-5:2010 | CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS |
| BS EN 14917 : 2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| I.S. EN 13322-1:2003 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| BS EN 13001-3-1 : 2012 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| EN 14399-8:2007 | High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies |
| EN 14917:2009+A1:2012 | Metal bellows expansion joints for pressure applications |
| UNI EN 13001-3-1 : 2013 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| BS EN 10217-5:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| UNI EN 1090-1 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| I.S. EN 10088-5:2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| UNI EN 14399-7 : 2008 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| I.S. EN 1993-1-10:2005 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN 14382:2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| DIN EN 13709:2010-10 | Industrial valves - Steel globe and globe stop and check valves |
| DIN EN 13261:2011-01 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| DIN EN 13262:2011-06 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| DIN EN 14532-1:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| DIN EN 12927-4:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS |
| BS EN 12079:1999 | Offshore containers. Design, construction, testing, inspection and marking |
| BS EN 14200:2004 | Railway applications. Suspension components. Parabolic springs, steel |
| BS EN 10250-1:1999 | Open steel die forgings for general engineering purposes General requirements |
| BS EN 10113-1:1993 | Hot-rolled products in weldable fine grain structural steels General delivery conditions |
| BS EN 14382 : 2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| BS EN 13261 : 2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| BS EN 10340:2007 | Steel castings for structural uses |
| BS EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| BS EN 1252-1:1998 | Cryogenic vessels. Materials Toughness requirements for temperatures below -80°C |
| BS EN 1993-5:2007 | Eurocode 3. Design of steel structures Piling |
| EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 1252-2:2001 | Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C |
| EN 10254:1999 | Steel closed die forgings - General technical delivery conditions |
| CEN/TS 15718:2011 | Railway applications - Wheelsets and bogies - Product requirements for cast wheels |
| EN 1160:1996 | Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas |
| EN 12079 : 1999 | OFFSHORE CONTAINERS - DESIGN, CONSTRUCTION, TESTING, INSPECTION AND MARKING |
| EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 12927-4:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 10294-1:2005 | Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
| UNI EN 13411-7 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| EN 10162:2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
| EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
| EN 1090-1:2009+A1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| I.S. EN 12284:2003 | REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
| EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
| EN 10213-1 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| EN 10045-2 : 1992 COR 1993 | METALLIC MATERIALS - CHARPY IMPACT TEST - VERIFICATION OF THE TESTING MACHINE (PENDULUM IMPACT) |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| DIN EN 14399-8:2008-03 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| DIN EN 13889:2009-02 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES, GRADE 6 - SAFETY |
| DEFSTAN 81-4/3(1992) : 1992 CORR 1 1997 | VALVES, CONTAINER, GAS |
| PREN 14015-1 : DRAFT 2000 | SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS |
| DIN EN 10088-4:2010-01 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| NFL 63 010 : 1997 AMD 1 1999 | AEROSPACE INDUSTRY - AIRBORNE, STATIONARY, PERMANENT PRESSURE, FIXED METALLIC EXTINGUISHERS - TECHNICAL SPECIFICATION AND QUALIFICATION CONDITIONS |
| DIN EN 14917:2012-06 | Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
| BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
| I.S. EN 10208-2:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| DIN EN 10253-2:2008-09 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| I.S. EN 1964-1:1999 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 50 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA |
| I.S. EN 1252-1:1998 | CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C |
| 13/30285283 DC : 0 | BS EN 13001-3-5 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATE AND PROOF OF COMPETENCE OF FORGED HOOKS |
| I.S. EN 1993-5:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX) |
| BS EN 1090-1 : 2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| 04/30116684 DC : DRAFT JUL 2004 | EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LPG METALLIC PRESSURE DRUMS WITH A CAPACITY BETWEEN (150 AND 1 000 LITRES) |
| BS EN 10088-5:2009 | Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| I.S. EN 10045-2:1993 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 2: VERIFICATION OF THE TESTING MACHINE (PENDULUM IMPACT) |
| DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| 11/30239494 DC : 0 | BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| PREN 13709 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| PREN 1984 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| 07/30166055 DC : 0 | BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| I.S. EN 334:2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| UNI EN 1515-4 : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
| UNE-EN 1090-1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| 11/30239473 DC : 0 | BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DD CEN/TS 13001-3-1 : 2004 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| NF EN 4700-005 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| 03/103470 DC : DRAFT FEB 2003 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| 09/30207501 DC : 0 | BS EN 10217-1 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DD CEN/TS 15718:2011 | Railway applications. Wheelsets and bogies. Product requirements for cast wheels |
| UNI EN 334 : 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
| PREN 10217-4 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN 4700-001:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| 06/19981869 DC : DRAFT OCT 2006 | BS ISO 16877 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE TH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS |
| 05/30132585 DC : DRAFT APR 2005 | EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| EN 12079-2:2006 | Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking |
| 08/30184312 DC : DRAFT SEP 2008 | BS EN 12952-6 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| 07/30173607 DC : 0 | BS EN 15718 - RAILWAY APPLICATIONS - MONOBLOCK WHEEL PRODUCTS - CAST WHEELS |
| 04/30117386 DC : DRAFT JUL 2004 | EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| DIN 8563-123:1994-06 (Draft) | QUALITY ASSURANCE OF WELDED STRUCTURES; SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS; WELDING PROCEDURE TEST FOR PIPELINE WELDING ON SITE |
| I.S. EN 13766:2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| ONORM EN 334 : JUN 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| PREN 10149-2 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| I.S. EN 10217-6:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN 10217-5:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| BS EN 10217-4:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties |
| UNI EN 14399-10 : 2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| ONORM EN 14399-10 : JUN 2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| PREN 10217-3 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN 10217-6:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNE-EN 10088-4:2010 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| NF EN 4700-002 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| NF EN 1804-2 : 2002 + A1 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS |
| I.S. EN 10253-2:2007 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 1804-1:2010-05 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements (includes Amendment A1:2010) |
| NF EN 13262 : 2004 + A2 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| DIN EN 1804-2:2010-05 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams (includes Amendment A1:2010) |
| DIN EN 12284:2004-01 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| DIN EN 1984:2010-10 | Industrial valves - Steel gate valves |
| DIN EN 14382:2016-05 (Draft) | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| DIN EN 10297-1:2003-06 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| DIN EN 15049:2007-12 | Railway applications - Suspension components - Torsion bar, steel |
| BS EN 1993-1-10:2005 | Eurocode 3. Design of steel structures Material toughness and through-thickness properties |
| BS EN 14532-1:2004 | Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| BS EN 10162:2003 | Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances |
| BS EN 334 : 2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 10155:1993 | Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions |
| BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
| BS EN 13322-2:2003 | Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction Stainless steel |
| BS EN 1984:2010 | Industrial valves. Steel gate valves |
| BS EN 14620-3:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Concrete components |
| BS EN 13709:2002 | Industrial valves. Steel globe and globe stop and check valves |
| BS EN ISO 21329:2004 | Petroleum and natural gas industries. Pipeline transportation systems. Test procedures for mechanical connectors |
| UNI EN 1804-2 : 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS |
| DIN EN 10208-2:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| EN 1804-2:2001+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams |
| I.S. EN 13889:2003 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
| DIN EN 14585-1:2006-04 | Corrugated metal hose assemblies for pressure applications - Part 1: Requirements |
| I.S. EN 1804-1:2002 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| DIN EN 10210-1:2006-07 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| DIN EN 10213-1:1996-01 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| I.S. EN 1804-2:2002 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS |
| I.S. EN 1984:2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| EN 1804-1:2001+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements |
| I.S. EN 13411-6:2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| I.S. EN 10219-1:2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10083-2:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
| UNI EN 1804-1 : 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| I.S. EN 13411-7:2006 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| I.S. EN 10210-1:2006 | HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 13709:2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| DIN EN 10083-3:2007-01 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| EN 13155:2003+A2:2009 | Cranes - Safety - Non-fixed load lifting attachments |
| DIN EN 10025-1:2005-02 | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004 |
| I.S. EN 13155:2003 | CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| I.S. EN 88-2:2007 | PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR |
| BS 1113:1992 | Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers) |
| 11/30239491 DC : 0 | BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| BS EN 10217-1:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| 03/103468 DC : DRAFT FEB 2003 | BS EN 10210-1 - HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| 02/712507 DC : DRAFT OCT 2002 | EN 14585 - PRESSURISED CORRUGATED METAL HOSE ASSEMBLIES |
| DIN EN 14399-10:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| BS EN 14399-8:2007 | High-strength structural bolting assemblies for preloading System HV. Hexagon fit bolt and nut assemblies |
| 04/30123271 DC : DRAFT OCT 2004 | EN 10340 - STEEL CASTINGS FOR STRUCTURAL USES |
| UNI EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| 11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| 09/30205877 DC : 0 | BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES |
| I.S. EN 12567:2000 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS |
| 09/30207511 DC : 0 | BS EN 10217-4 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| BS EN 14638-3:2010 | Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded carbon steel cylinders made to a design justified by experimental methods |
| UNI EN 4700-005 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| UNI EN 10088-5 : 2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction |
| NF EN 13766 : 2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| DIN EN 10253-4:2008-06 | Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| PREN 1562 : DRAFT 2009 | FOUNDING - MALLEABLE CAST IRONS |
| 12/30260955 DC : 0 | BS EN 13796-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
| 09/30205883 DC : 0 | BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| 07/30165594 DC : DRAFT AUG 2007 | BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL TANKS FOR LIQUEFIED PETROLEUM GAS (LPG) - ROAD TANKERS DESIGN AND MANUFACTURE |
| 09/30207514 DC : 0 | BS EN 10217-5 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 06/19981867 DC : DRAFT OCT 2006 | BS ISO 16872 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE VH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS |
| 01/715451 DC : DRAFT NOV 2001 | PREN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES |
| NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI CEN/TS 13001-3-1 : 2005 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| NF EN 4700-006 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| 09/30207521 DC : 0 | BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| 04/30118252 DC : DRAFT AUG 2004 | EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| 06/30155635 DC : 0 | EN 13261 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| 00/715206 DC : DRAFT OCT 2000 | PREN 14015-1 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS |
| 01/705811 DC : 0 | BS 5892-7 - RAILWAY ROLLING STOCK MATERIALS - PART 7: SPECIFICATION FOR CAST WHEELS FOR TRACTION AND TRAILING STOCK |
| 05/30132603 DC : DRAFT APR 2005 | EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| I.S. EN 10085:2001 | NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10253-4 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 13001-3-1:2013-12 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| DIN EN 13766:2010-11 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| ONORM EN 13322-1 : 2006 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| I.S. EN 10217-1:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| EN 14399-7:2007 | High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies |
| PREN 14359 : DRAFT 2014 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| DIN EN 10217-5:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10217-7 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| DIN EN 10217-3:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN 14399-7:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| DIN EN 13322-1:2006-05 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| DIN EN 10217-1:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DIN EN 334:2016-05 (Draft) | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| I.S. EN 12927-4:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS |
| EN 13766:2010 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| BS EN 10217-6:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| I.S. EN 10225:2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 14917:2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| DIN EN 10083-1:2006-10 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN EN 13155:2009-08 | Cranes - Safety - Non-fixed load lifting attachments (includes Amendment A2:2009) |
| DIN EN 10340:2008-01 | Steel castings for structural uses |
| DIN EN 14276-2:2011-05 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| BS EN 13889 : 2003 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
| BS EN 12079-2:2006 | Offshore containers and associated lifting sets Lifting sets. Design, manufacture and marking |
| BS EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B |
| BS EN 1964-2:2001 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless steel with an <i>R</i><sub>m</sub> value of 1 100 MPa and above |
| BS EN 13322-1 : 2003 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| BS EN 12567:2000 | Industrial valves. Isolating valves for LNG. Specification for suitability and appropriate verification tests |
| BS EN 13411-6 : 2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| UNI EN 13262 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| UNI EN 13261 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| UNI EN 14276-2 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| EN 13261:2009+A1:2010 | Railway applications - Wheelsets and bogies - Axles - Product requirements |
| I.S. EN 13262:2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| UNE-EN 10225:2010 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 13262:2004+A2:2011 | Railway applications - Wheelsets and bogies - Wheels - Product requirements |
| EN 14208:2004 | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
| UNI EN 10208-2 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| UNI EN 10225 : 2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 1993-5 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| UNI EN 10250-1 : 2001 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - GENERAL REQUIREMENTS |
| UNI EN 10083-1 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10219-1 : 2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| UNI EN 13889 : 2009 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6: SAFETY |
| UNI EN 1993-1-10 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES |
| UNI EN 10083-3 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 13411-6 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| UNI EN 14382 : 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| UNI EN 1984 : 2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| I.S. EN 10250-1:2000 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS |
| UNI EN 13709 : 2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| DD CEN/TS 13001-3-5:2010 | Cranes. General design Limit states and proof of competence of forged hooks |
| UNI CEN/TS 15718 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| BS EN 10217-2 : 2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 10343:2009-07 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| PREN 13796-1 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS |
| 08/30181655 DC : DRAFT SEP 2008 | BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| I.S. EN 12079-2:2006 | OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING |
| 04/30111048 DC : 0 | EN 88-2 - PRESSURE GOVERNORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2 - PRESSURE GOVERNORS FOR INLET PRESSURES BETWEEN 0.5 BAR AND 5 BAR |
| 98/705399 DC : DRAFT MAR 1998 | PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS |
| 03/108196 DC : 0 | EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 1160:1997 | INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS |
| I.S. EN 10025-1:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 08/30188437 DC : 0 | BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| UNI EN 10343 : 2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| DIN EN 10210-1:2016-01 (Draft) | Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016 |
| 14/30274238 DC : 0 | BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| DIN EN 10088-5:2009-07 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| UNI EN 14917 : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| 05/30126202 DC : 0 | EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| 03/118134 DC : DRAFT NOV 2003 | EN 12252 - EQUIPPING OF LIQUEFIED PETROLEUM GAS (LPG) ROAD TANKERS |
| 08/30173031 DC : DRAFT JAN 2008 | BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| NF EN 4700-001 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| 09/30185942 DC : 0 | BS EN 13835 - FOUNDING - AUSTENITIC CAST IRONS |
| 04/30123693 DC : DRAFT OCT 2004 | EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| BS EN 10253-4:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| UNI EN 14638-3 : 2010 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS |
| 05/30129555 DC : 0 | PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| BS EN 10088-4:2009 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| NFA 36 603 : 1988 | WELDABLE STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS - HIGH YIELD STRENGTH ALLOY STEELS - GRADES AND TYPES |
| I.S. EN 10217-4:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN 10088-4:2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| XP CEN/TS 13001-3-5 : 2010 XP | CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE FOR FORGED HOOKS |
| BS EN 10217-3:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| DIN EN 10217-4:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNE-EN 13766:2011 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| DIN EN 10217-2:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| UNI EN 4700-001 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| NF EN 13261 : 2009 + A1 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| NF EN 10225 : 2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| NF EN 1804-1 : 2002 + A1 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| DIN EN 14015:2005-02 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| DIN EN 14208:2004-05 | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
| UNE-EN 10208-2:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| DIN EN 10225:2009-10 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 88-2:2008-03 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| DIN EN 10219-1:2016-01 (Draft) | Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016 |
| DIN EN 10085:2001-07 | Nitriding steels - Technical delivery conditions; English version of DIN EN 10085 |
| BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
| BS EN 10025-1:2004 | Hot rolled products of structural steels General technical delivery conditions |
| BS EN 14341:2006 | Industrial valves. Steel check valves |
| BS EN 10213-1:1996 | Technical delivery conditions for steel castings for pressure purposes General |
| BS EN 14620-2:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Metallic components |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS EN 13262 : 2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| BS EN 10083-2:2006 | Steels for quenching and tempering Technical delivery conditions for non alloy steels |
| BS EN 14276-2 : 2007 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| BS EN 1964-1:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless steel with an <i>R</i><sub>m</sub> value of less than 1100 MPa |
| BS EN 10083-1:2006 | Steels for quenching and tempering General technical delivery conditions |
| BS EN 14638-1:2006 | Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
| BS EN 13411-7 : 2006 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| BS EN 10137-1:1996 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions General delivery conditions |
| BS EN 1964-3:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless stainless steel with an <i>R</i><sub>m</sub> value of less than 1 100 MPa |
| ISO 21329:2004 | Petroleum and natural gas industries Pipeline transportation systems Test procedures for mechanical connectors |
| I.S. EN 14276-2:2007 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| BS EN 13155 : 2003 | CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| BS EN 15049:2007 | Railway applications. Suspension components. Torsion bar, steel |
| EN 14276-2:2007+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
| UNE-EN 13262:2005 | Railway applications - Wheelsets and bogies - Wheels - Product requirement. |
| BS EN 1160:1997 | Installations and equipment for liquefied natural gas. General characteristics of liquefied natural gas |
| BS EN 10085 : 2001-05 | NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS |
| BS EN 13298:2003 | Railway applications. Suspension components. Helical suspension springs, steel |
| BS EN 1804-1 : 2001 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN 14585-1:2006 | Corrugated metal hose assemblies for pressure applications - Part 1: Requirements |
| EN 10225:2009 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN ISO 21329:2004 | Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004) |
| EN 875:1995 | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
| EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
| EN 13709:2010 | Industrial valves - Steel globe and globe stop and check valves |
| EN 15049:2007 | Railway applications - Suspension components - Torsion bar, steel |
| EN 14638-1:2006 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
| EN 13889:2003+A1:2008 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
| EN 14532-1:2004 | Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| EN 1964-2 : 2001 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO AND INCLUDING 150 LITRES - PART 2: CYLINDERS MADE OF SEAMLESS STEEL WITH AN R[M] VALUE OF 1 100 MPA AND ABOVE |
| EN 14620-3:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components |
| EN 288-9 : 1999 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST FOR PIPELINE WELDING ON LAND AND OFFSHORE SITE BUTT WELDING OF TRANSMISSION PIPELINES |
| EN 14200:2004 | Railway applications - Suspension components - Parabolic springs, steel |
| EN 1964-3:2000 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa |
| EN 1984:2010 | Industrial valves - Steel gate valves |
| EN 14620-2:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components |
| EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
| EN 286-3:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EN 1964-1:1999/AC:1999 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 150 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA |
| EN 4700-001:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
| EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
| EN 14341:2006 | Industrial valves - Steel check valves |
| 09/30187760 DC : DRAFT JULY 2009 | BS EN 1562 - FOUNDING - MALLEABLE CAST IRONS |
| 03/109805 DC : DRAFT JUNE 2003 | EN 0023095 - TRANSPORTABLE GAS CYLINDERS - WELDED AUSTENITIC STAINLESS STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY FE OR EXPERIMENTAL METHODS |
| I.S. EN 14341:2006 | INDUSTRIAL VALVES - STEEL CHECK VALVES |
| 08/30184300 DC : DRAFT SEP 2008 | BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| PREN 88-2 : DRAFT 2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 50 KPA UP TO AND INCLUDING 500 KPA AND ASSOCIATED SAFETY DEVICES |
| 11/30248438 DC : 0 | BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| PREN 10217-2 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 02/710858 DC : DRAFT SEP 2002 | BS EN 14532-1 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| 01/715452 DC : DRAFT NOV 2001 | PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| NF EN 14638-3 : 2010 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL, CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS |
| UNE-EN 14276-2:2008 | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| UNE-EN 14638-3:2011 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods |
| 08/30182457 DC : DRAFT JULY 2008 | BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| 98/712958 DC : DRAFT AUG 1998 | PREN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 04/30124490 DC : DRAFT OCT 2004 | EN 15049 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| DIN EN 14399-8:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| EN 12079-1:2006 | Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking |
| PREN 10217-5 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 05/30132598 DC : DRAFT APR 2005 | EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
| S.R. CEN/TS 15718:2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| PREN 10025-1 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| PREN 4700-001 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN 1090-1:2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| NF EN 1090-1 : 2009 + A1 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| I.S. EN 14399-7:2007 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| PREN 1559-1 : DRAFT 2009 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 10343:2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 14399-8 : 2008 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| I.S. EN 10253-4:2008 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| BS EN 14399-10:2009 | High-strength structural bolting assemblies for preloading System HRC. Bolt and nut assemblies with calibrated preload |
| I.S. EN 10217-2:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| UNI EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| PREN 10149-1 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| UNE-EN 14917:2011 | Metal bellows expansion joints for pressure applications |
| BS EN 13766:2010 | Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification |
| KTA 3201.3 : 2007(R2012) | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| I.S. EN 14399-8:2007 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| I.S. EN 10083-3:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| DIN EN 1993-1-10:2010-12 | Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties (includes Corrigendum AC:2009) |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| DIN EN 13298:2003-11 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HELICAL SUSPENSION SPRINGS, STEEL |
| BS EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
| BS EN 12079-1:2006 | Offshore containers and associated lifting sets Offshore containers. Design, manufacture and marking |
| BS EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
| BS EN 1251-2:2000 | Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume Design, fabrication, inspection and testing |
| BS EN 14208:2004 | Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction |
| DIN EN 10296-1:2004-02 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| BS EN 1252-2:2001 | Cryogenic vessels. Materials Toughness requirements for temperatures between -80°C and -20°C |
| BS EN 10294-1:2005 | Hollow bars for machining. Technical delivery conditions Non alloy and alloy steels |
| BS EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS EN 12927-4:2004 | Safety requirements for cableway installations designed to carry person. Ropes End fixings |
| BS EN 14585-1:2006 | Corrugated metal hose assemblies for pressure applications Requirements |
| BS EN 10225:2009 | Weldable structural steels for fixed offshore structures. Technical delivery conditions |
| BS EN 10254:1999 | Steel closed die forgings. General technical delivery conditions |
| BS EN 1804-2 : 2001 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS |
| BS EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS EN 288-9:1999 | Specification and approval of welding procedures for metallic materials Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines |
| DIN EN 10294-1:2005-12 | Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
| DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| DIN EN 13411-6:2009-04 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| CEN/TS 13001-3-5:2010 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| EN 12284:2003 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| ONORM EN 10253-2 : 2008 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| EN 10137-1 : 1995 | PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - GENERAL DELIVERY CONDITIONS |
| ONORM EN 13411-7 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| EN 10343:2009 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| DIN EN 10219-1:2006-07 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10250-1:1999 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
| DIN EN 1993-5:2010-12 | Eurocode 3: Design of steel structures - Part 5: Piling (includes Corrigendum AC:2009) |
| EN 12567:2000 | Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests |
| DIN EN 1090-1:2012-02 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components (includes Amendment A1:2011) |
| DIN EN 13411-7:2009-04 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket (includes Amendment A1:2008) |
| DIN EN 14200:2004-05 | Railway applications - Suspension components - Parabolic springs, steel |
| EN 13298:2003 | Railway applications - Suspension components - Helical suspension springs, steel |
| DIN EN 14638-1:2006-07 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
| DIN EN 10162:2003-12 | Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003 |
| BS 3602-2:1991 | Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties Specification for longitudinally arc welded tubes |
| UNE-EN 1804-1:2003 | Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 1: Support units and general requiremetns. |
| UNE-EN 1804-2:2003 | Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 2: Power set legs and rams. |
| EN 10045-2 : 1992 COR 1993 | METALLIC MATERIALS - CHARPY IMPACT TEST - VERIFICATION OF THE TESTING MACHINE (PENDULUM IMPACT) |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.