EN 61000-4-8:2010
Current
Current
The latest, up-to-date edition.
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
Published date
12-02-2010
Sorry this product is not available in your region.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Test levels
6 Test equipment
7 Test set-up
8 Test procedure
9 Evaluation of the test results
10 Test report
Annex A (normative) Inductive coil calibration method
Annex B (normative) Characteristics of the inductive coils
Annex C (informative) Selection of the test levels
Annex D (informative) Information on power frequency magnetic
field strength
Bibliography
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
IEC 61000-4-8:2009 relates to the immunity requirements of equipment, only under operational conditions, to magnetic disturbances at power frequencies 50 Hz and 60 Hz related to: - residential and commercial locations; - industrial installations and power plants; - medium voltage and high voltage sub-stations. The applicability of IEC 61000-4-8:2009 to equipment installed in different locations is determined by the presence of the phenomenon, as specified in Clause 4. This standard does not consider disturbances due to capacitive or inductive coupling in cables or other parts of the field installation. Other IEC standards dealing with conducted disturbances cover these aspects. The object of IEC 61000-4-8:2009 is to establish a common and reproducible basis for evaluating the performance of electrical and electronic equipment for household, commercial and industrial applications when subjected to magnetic fields at power frequency (continuous and short duration field). IEC 61000-4-8:2009 defines: - recommended test levels; - test equipment; - test set-up; - test procedure. This second edition cancels and replaces the first edition published in 1993 and its Amendment 1 (2000). It forms a technical revision. This edition includes the following significant technical changes with respect to the previous edition: the scope is extended in order to cover 60 Hz. Characteristics, performance and verification of the test generator and related inductive coils are revised. Modifications are also introduced in the test set-up (GRP) and test procedure. IEC 61000-4-8:2009 has the status of a basic EMC publication in accordance with IEC Guide 107. NEW! IEC 61000-4-8:2009 is also available as IEC Standards+ 61000-4-8:2009 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
| Committee |
CLC/TC 210
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 61000 4-8 : 2010 | Identical |
| NEN EN IEC 61000-4-8 : 2010 | Identical |
| NEN 11000-4-8 : 1994 | Identical |
| I.S. EN 61000-4-8:2010 | Identical |
| PN EN 61000-4-8 : 2010 | Identical |
| SN EN 61000-4-8 : 1993 AMD 1 2001 | Identical |
| DIN EN 61000-4-8 : 2010 | Identical |
| VDE 0847-4-8 : 2010 | Identical |
| UNE-EN 61000-4-8:2011 | Identical |
| BS EN 61000-4-8:2010 | Identical |
| CEI EN 61000-4-8 : 2013 | Identical |
| NF EN 61000 4-8 : 2010 | Identical |
| IEC 61000-4-8:2009 | Identical |
| BS EN 62841-2-14:2015 | Identical |
| BS EN 60846-1:2014 | Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Portable workplace and environmental meters and monitors |
| BS EN 16314:2013 | Gas meters. Additional functionalities |
| BS EN 50065-2-3:2003 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 Khz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
| 13/30252780 DC : 0 | BS EN 50121-5 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| NF EN 50491-5-2 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT |
| CEI EN 61131-6 : 2013 | PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY |
| I.S. EN 60947-5-1:2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
| CLC/TS 62603-1:2014 | Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
| BS EN 61131-6:2012 | Programmable controllers Functional safety |
| CEI EN 61869-6 : 1ED 2017 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| I.S. EN 50065-2-2:2003 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS |
| BS EN 50412-2-1:2005 | Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Residential, commercial and industrial environment - Immunity requirements |
| CEI EN 60947-5-3 : 2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| BS EN 60601-2-30:2000 | Medical electrical equipment. Particular requirements for safety Particular requirements for safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment |
| EN 61326-1:2013 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
| I.S. EN 61800-3:2005 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV)) |
| PREN 12895 : DRAFT 2013 | INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY |
| DIN V ENV 50121-4 : 1997 | BAHNANWENDUNGEN - ELEKTROMAGNETISCHE VERTRAEGLICHKEIT - STOERAUSSENDUNG UND STOERFESTIGKEIT VON SIGNAL- UND TELEKOMMUNIKATIONSEINRICHTUNGEN |
| 09/30192323 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) Generic standards. Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| BS EN 50270:2015 | Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| BS EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) Generic standards. Immunity for residential, commercial and light-industrial environments |
| BS EN 50293:2012 | Road traffic signal systems. Electromagnetic compatibility |
| BS EN 62387:2016 | Radiation protection instrumentation. Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation |
| EN 60947-5-1:2017 | Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
| PREN 12405-3 : DRAFT 2013 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| BS EN 50065-2-2:2003 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments |
| CEI EN 62252 : 2005 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - RADAR FOR CRAFT NOT IN COMPLIANCE WITH IMO SOLAS CHAPTER V - PERFORMANCE REQUIREMENTS, METHODS OF TEST AND REQUIRED TEST RESULTS |
| I.S. EN 61557-16:2015 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 16: EQUIPMENT FOR TESTING THE EFFECTIVENESS OF THE PROTECTIVE MEASURES OF ELECTRICAL EQUIPMENT AND/OR MEDICAL ELECTRICAL EQUIPMENT |
| DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
| DIN EN 12405-2:2012-10 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| S.R. HD 60364-5-51:2009 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES |
| CEI EN 50293 : 2013 | ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY |
| UNE-EN 12405-1:2006 | Gas meters - Conversion devices - Part 1: Volume conversion |
| I.S. EN 50491-5-2:2010 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS, FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT |
| I.S. EN 61326-3-2:2008 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
| BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 61869-6:2016 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| BS EN 60947-5-3:2013 | Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| CEI EN 61557-14 : 2014 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 14: EQUIPMENT FOR TESTING THE SAFETY OF ELECTRICAL EQUIPMENT OF MACHINERY |
| BS EN 60770-1:1999 | Transmitters for use in industrial-process control systems Methods for performance evaluation |
| UNE-EN 50121-5:2018 | Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
| I.S. EN 62387:2016 | RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION |
| NF EN 12405-1 : 2005 + A2 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 60945:2002 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| UNI EN 12405-1 : 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN 62488-2:2017 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| I.S. EN 60770-1:2011 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
| I.S. EN 12895:2015 | INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY |
| DIN EN 12953-9:2007-09 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| UNE-EN 298:2013 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| UNE-EN 61812-1:2012 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| BS EN 12895:2015 | Industrial trucks. Electromagnetic compatibility |
| EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
| EN 61557-14:2013 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery |
| EN 12405-2:2012 | Gas meters - Conversion devices - Part 2: Energy conversion |
| EN 60770-1:2011 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
| EN 61058-1:2002/A2:2008 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| EN 61000-6-5:2015/AC:2018-01 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT (IEC 61000-6-5:2015/COR1:2017) |
| EN 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements |
| EN 12895:2015 | Industrial trucks - Electromagnetic compatibility |
| EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
| EN 50293:2012 | Road traffic signal systems - Electromagnetic compatibility |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 60947-8:2003/A2:2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011) |
| EN 60601-1-2:2015 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| EN 61131-6:2012 | Programmable controllers - Part 6: Functional safety |
| EN 50412-2-1 : 2005 COR 2009 | POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS |
| EN 61131-2:2007 | Programmable controllers - Part 2: Equipment requirements and tests |
| EN 12952-11:2007 | Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories |
| EN 60669-2-5:2016 | Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) |
| EN 62310-2:2007 | Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements |
| EN 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| EN 62387:2016 | RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION (IEC 62387:2012, MODIFIED) |
| EN 62327:2011 | RADIATION PROTECTION INSTRUMENTATION - HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES AND FOR THE INDICATION OF AMBIENT DOSE EQUIVALENT RATE FROM PHOTON RADIATION |
| EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| EN 61298-3:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
| EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| PREN 1643 : DRAFT 2012 | VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| UNE-EN 60947-5-3:2014 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| CEI 13-32 : 2000 | WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS |
| CEI EN 62282-3-201 : 2014 | FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS |
| BS EN 61869-6:2016 | Instrument transformers Additional general requirements for low-power instrument transformers |
| I.S. EN 61326-1:2013 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012 (EQV)) |
| 11/30255400 DC : 0 | BS EN 50293 - ELECTROMAGNETIC COMPATIBILITY - ROAD TRAFFIC SIGNAL SYSTEMS |
| BS EN 60268-4:2014 | Sound system equipment Microphones |
| PREN 12405-1 : DRAFT 2017 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| 12/30267815 DC : 0 | BS EN 1643 - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| BS EN 61000-6-2:2005 | Electromagnetic compatibility (EMC) Generic standards - Immunity for industrial environments |
| UNE-EN 60947-5-2:2008 | Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches |
| 16/30340737 DC : 0 | BS EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| CEI EN 61547 : 2010 | EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS |
| PD CLC/TS 62603-1:2014 | Industrial process control systems. Guideline for evaluating process control systems Specifications |
| CEI EN 61326-3-2 : 2011 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
| I.S. EN 61000-6-1:2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| UNE-EN 50293:2013 | Road traffic signal systems - Electromagnetic compatibility |
| BS EN 61481-2:2014 | Live working. Phase comparators Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
| 03/102517 DC : 0 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS - REQUIREMENTS AND TEST METHODS |
| PREN 50121-5 : DRAFT 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| BS EN 50491-5-2:2010 | General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
| 04/30116612 DC : DRAFT JUL 2004 | EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| I.S. EN 61812-1:2011 | TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS |
| CEI EN 62488-2 : 1ED 2018 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| CEI EN 62689-1 : 1ED 2017 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| 04/30115154 DC : DRAFT JUN 2004 | EN 50412-1 - IMMUNITY REQUIREMENTS FOR POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT |
| I.S. EN 16314:2013 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| I.S. EN 60669-2-5:2016 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-5: PARTICULAR REQUIREMENTS - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) |
| CEI EN 61000-6-2 : 2006 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS |
| CEI EN 61526 : 2013 | RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS |
| BS EN 60255-26:2013 | Measuring relays and protection equipment Electromagnetic compatibility requirements |
| EN IEC 61058-1:2018 | Switches for appliances - Part 1: General requirements |
| UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
| CEI EN 60945 : 2003 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| BS EN 60044-8:2002 | Instrument transformers Electronic current transformers |
| ES 201 468 : 1.4.1 | ADDITIONAL ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS AND RESISTIBILITY REQUIREMENTS FOR TELECOMMUNICATIONS EQUIPMENT FOR ENHANCED AVAILABILITY OF SERVICE IN SPECIFIC APPLICATIONS |
| CEI EN 61786-1 : 2014 | MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS |
| I.S. EN 61000-6-7:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL LOCATIONS |
| I.S. EN 12405-2:2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| I.S. EN 62282-3-201:2017 | FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS |
| CEI EN 61557-13 : 2012 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 13: HAND-HELD AND HAND-MANIPULATED CURRENT CLAMPS AND SENSORS FOR MEASUREMENT OF LEAKAGE CURRENTS IN ELECTRICAL DISTRIBUTION SYSTEMS |
| BS EN 62327:2011 | Radiation protection instrumentation. Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation |
| I.S. EN 61000-6-5:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT |
| I.S. EN 50270:2015 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| CEI EN 61326-3-1 : 2011 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS |
| I.S. EN 61058-1:2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS EN 61058-1 : 2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS EN 60947-1 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| I.S. EN 50470-1:2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| I.S. EN 61547:2009 | EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS |
| BS EN 60947-5-2 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES |
| EN 1434-4:2015 | Heat meters - Part 4: Pattern approval tests |
| I.S. EN 60947-5-2:2008 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007 (EQV)) |
| I.S. EN 61481-2:2014 | LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C. |
| BS EN 1434-4 : 2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| I.S. EN 1434-4:2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| PREN 12182 : 2009-06 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 50121-4:2016 | Railway applications. Electromagnetic compatibility Emission and immunity of the signalling and telecommunications apparatus |
| BS EN 55024 : 2010 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
| I.S. EN 50121-5:2017 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| CEI EN 50121-4 : 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| I.S. EN 60947-8:2003 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003 (EQV)) |
| DIN EN 12182:2012-07 | Assistive products for persons with disability - General requirements and test methods |
| DIN EN 1643:2014-09 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 61131-2:2007 | Programmable controllers Equipment requirements and tests |
| I.S. EN 1643:2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| DIN EN 1643:2001-02 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| I.S. EN 14143:2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| DIN EN 1434-4:2019-08 | Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018) |
| I.S. EN 12182:2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
| I.S. EN 809:1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| I.S. EN 298:2012 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| VDI/VDE 2185 Blatt 1:2007-09 | Radio based communication in industrial automation |
| VDE V 0115-121-4 : 1997 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| UNE-EN 61557-13:2012 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems |
| CEI EN 62974-1 : 1ED 2017 | MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS |
| 09/30192320 DC : DRAFT MAY 2009 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 61098:2007 | Radiation protection instrumentation. Installed personnel surface contamination monitoring assemblies |
| 13/30289289 DC : 0 | BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| 16/30340740 DC : 0 | BS EN 50121-5 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| CEI EN 60044-7 : 2001 | INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS |
| 12/30241725 DC : 0 | BS ISO 28057 - DOSIMETRY WITH SOLID THERMOLUMINSCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY |
| BS EN 61800-3 : 2004 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS |
| UNI EN 12405-2 : 2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| BS EN 62488-2:2017 | Power line communication systems for power utility applications Analogue power line carrier terminals or APLC |
| 14/30291768 DC : 0 | BS EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| 10/30212177 DC : 0 | BS EN 12405-1:2005/A2 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| CEI EN 60947-5-9 : 2008 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES |
| 09/30201992 DC : 0 | BS EN 12182 - ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| 13/30257892 DC : 0 | BS EN 12895 - INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY |
| CEI EN 60601-1-2 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| CEI EN 61812-1 : 2012 | TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS |
| BS EN 62282-3-201:2017 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods for small fuel cell power systems |
| BS EN 61000-4-1:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Overview of IEC 61000-4 series |
| UNE-EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
| PREN 12067-2 : DRAFT 2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - PART 2: FUEL/AIR RATIO CONTROL/SUPERVISION OF THE ELECTRONIC TYPE |
| BS EN 62534:2015 | Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material |
| PREN 50293 : DRAFT 2011 | ELECTROMAGNETIC COMPATIBILITY - ROAD TRAFFIC SIGNAL SYSTEMS |
| EN 62974-1:2017 | Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements |
| UNE-EN 55024:2011 | Information technology equipment - Immunity characteristics - Limits and methods of measurement |
| I.S. EN 61557-14:2013 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1 000 V A.C. AND 1 500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 14: EQUIPMENT FOR TESTING THE SAFETY OF ELECTRICAL EQUIPMENT OF MACHINERY (IEC 61557-14:2013 (EQV)) |
| EN 50121-5:2017 | Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
| CEI EN 61326-1 : 2013 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS |
| BS EN 61526:2013 | Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters |
| UNE-EN 61547:2011 | Equipment for general lighting purposes - EMC immunity requirements |
| I.S. EN 61326-3-1:2017 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS |
| I.S. EN 60846-1:2014 | RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS |
| CEI EN 60770-1 : 2014 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
| I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| I.S. EN 60947-5-3:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| EN 61326-3-1:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications |
| I.S. EN 50065-2-1:2003 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS |
| I.S. EN 62252:2004 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - RADAR FOR CRAFT NOT IN COMPLIANCE WITH IMO SOLAS CHAPTER 5 - PERFORMANCE REQUIREMENTS, METHODS OF TEST AND REQUIRED TEST RESULTS |
| CEI EN 50121-5 : 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| I.S. EN 61439-1:2011 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011) |
| UNE-EN 61481-2:2015 | Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
| EN 50121-4:2016 | Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
| I.S. EN 61326:1998 | |
| I.S. EN 61786-1:2014 | MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS |
| DD ENV 14236:2002 | Ultrasonic domestic gas meters |
| PREN 1434-4 : DRAFT 2014 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| I.S. EN 61098:2007 | RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES |
| UNE-EN 60669-2-5:2017 | Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) |
| CEI EN 50491-5-2 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT |
| EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
| I.S. EN 60601-1-2:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| I.S. EN 50121-4:2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| DIN EN 14143:2013-10 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| DIN EN 12952-11:2007-09 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| BS EN 809 : 1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 809:1998+A1:2009 | Pumps and pump units for liquids - Common safety requirements |
| UNE-EN 12895:2016 | Industrial trucks - Electromagnetic compatibility |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| UNI EN 12952-11 : 2007 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNI EN 809 : 2009 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNI EN 14143 : 2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| UNI EN 1643 : 2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| UNI EN 12182 : 2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| UNI EN 298 : 2012 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| CEI EN 61298-3 : 2011 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES |
| DIN EN 60601-2-30 : 2000 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE SAFETY, INCLUDING ESSENTIAL PERFORMANCE, OF AUTOMATIC CYCLING NON-INVASIVE BLOOD PRESSURE MONITORING EQUIPMENT |
| BS EN 60669-2-5:2016 | Switches for household and similar fixed electrical installations Particular requirements. Switches and related accessories for use in home and building electronic systems (HBES) |
| CEI EN 60044-8 : 2004 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS |
| NF ETS 300673 : 1998 | |
| CEI EN 61514 : 2002 | INDUSTRIAL-PROCESS CONTROL SYSTEMS - METHODS OF EVALUATING THE PERFORMANCE OF VALVE POSITIONERS WITH PNEUMATIC OUTPUTS |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| PREN 50121-4 : DRAFT 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
| BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
| BS EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results |
| BS EN 60044-7:2000 | Instrument transformers Electronic voltage transformers |
| 13/30260741 DC : 0 | BS EN 50270 - ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| BS EN 61557-13:2011 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems |
| BS EN 50370-2:2003 | Electromagnetic compatibility (EMC). Product family standard for machine tools Immunity |
| 13/30252777 DC : 0 | BS EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| S.R. CLC/TS 62603-1:2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS |
| BS EN 61557-16:2015 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment |
| 11/30247615 DC : 0 | BS EN 16314 - GAS METERS - ADDITIONAL FUNCTIONALITIES |
| BS EN 61326-1:2013 | Electrical equipment for measurement, control and laboratory use. EMC requirements General requirements |
| BS EN 62252:2004 | Maritime navigation and radiocommunication equipment and systems. Radar for craft not in compliance with IMO SOLAS Chapter V. Performance requirements methods of test and required test results |
| BS EN 62310-2:2007 | Static transfer systems (STS) Electromagnetic compatibility (EMC) requirements |
| BS EN 62974-1:2017 | Monitoring and measuring systems used for data collection, gathering and analysis Device requirements |
| CEI EN 61098 : 2008 | RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES |
| BS EN 12405-2:2012 | Gas meters. Conversion devices Energy conversion |
| BS EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements |
| BS EN 60601-1-2:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests |
| BS EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use. EMC requirements Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applications with specified electromagnetic environment |
| CEI EN 50370-2 : 2004 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 2: IMMUNITY |
| 04/19986707 DC : 0 | BS EN 1804-4 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 4: ELECTRO-HYDRAULIC CONTROL SYSTEMS |
| UNE-EN 62974-1:2018 | Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements |
| BS EN 50121-5:2017 | Railway applications. Electromagnetic compatibility Emission and immunity of fixed power supply installations and apparatus |
| 04/30113789 DC : DRAFT MAY 2004 | EN 60846 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION |
| UNE-EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| BS EN 50263:2000 | Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipment |
| BS EN 61326:1998 | Electrical equipment for measurement, control and laboratory use. EMC requirements |
| DIN EN 50263 : 2000 | |
| CEI EN 61000-6-1 : 2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| BS EN 61298-3:2008 | Process measurement and control devices. General methods and procedures for evaluating performance Tests for the effects of influence quantities |
| CEI EN 55035 : 2018 | ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS |
| I.S. EN 62310-2:2007 | STATIC TRANSFER SYSTEMS (STS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| BS EN 50470-1 : 2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| I.S. EN 50370-2:2003 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 2: IMMUNITY |
| I.S. EN 62689-1:2016 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| DIN EN 1434-4:2016-02 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| I.S. EN 60669-2-1:2004 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES |
| CEI 13-26 : 1999 | WATT-HOUR METERS AND POWER LIMITERS FOR LOW-VOLTAGE NETWORKS (INTEGRATED UNITS) PERMITTED OR NOT FOR PROCESSING AND REMOTE MANAGEMENT OF DATA |
| CEI EN 62310-2 : 2007 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| I.S. EN 50412-2-1:2009 | POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS |
| ONORM EN 14236 : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN 61000-4-1:2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61131-2:2007 | PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
| I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 61557-13:2011 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 13: HAND-HELD AND HAND-MANIPULATED CURRENT CLAMPS AND SENSORS FOR MEASUREMENT OF LEAKAGE CURRENTS IN ELECTRICAL DISTRIBUTION SYSTEMS (IEC 61557-13:2011 (EQV)) |
| I.S. EN 60439-1:2000 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| DIN EN 809:2012-10 | Pumps and pump units for liquids - Common safety requirements |
| DIN EN 298:2012-11 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| UNE-EN 61000-6-5:2016 | Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment |
| BS EN 12952-11:2007 | Water-tube boilers and auxiliary installations Requirements for limiting devices of the boiler and accessories |
| BS EN 12953-9:2007 | Shell boilers Requirements for limiting devices of the boiler and accessories |
| EN 60947-5-2:2007/A1:2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007/A1:2012) |
| UNE-EN 50065-2-3:2004 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
| BS EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances. Valve proving systems for automatic shut-off valves |
| BS EN 60439-1:1999 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies |
| BS EN 14143:2013 | Respiratory equipment. Self-contained re-breathing diving apparatus |
| BS EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| UNE-EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| BS EN 60669-2-1 : 2004 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES |
| BS EN 12182:2012 | Assistive products for persons with disability. General requirements and test methods |
| UNE-EN 14143:2014 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN 61557-13:2011 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems |
| EN 61526:2013 | Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters |
| EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| EN 14143:2013 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN 16314:2013 | Gas meters - Additional functionalities |
| EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| 04/30116608 DC : DRAFT JUL 2004 | EN 50121-5 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| 03/102518 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EMERGENCY EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Requirements for measuring instruments |
| TR 103 400 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPACT OF CENELEC EN 55035 ON ETSI EMC STANDARDS |
| BS EN 61514:2002 | Industrial-process control systems. Methods of evaluating the performance of valve positioners with pneumatic outputs |
| 13/30274904 DC : 0 | BS EN 14154-4 - WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES |
| UNE-EN 16314:2014 | Gas meters - Additional functionalities |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS EN 50065-2-1:2003 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments |
| BS EN 60947-8:2003 | Low-voltage switchgear and controlgear Control units for built-in thermal protection (PTC) for rotating electrical machines |
| 10/30213584 DC : 0 | BS EN 14143 - RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| BS EN 61000-6-5:2015 | Electromagnetic compatibility (EMC) Generic standards. Immunity for equipment used in power station and substation environment |
| DIN EN 16314:2013-09 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| BS EN 50491-5-1:2010 | General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements, conditions and test set-up |
| I.S. EN 50065-2-3:2003 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS |
| BS EN 60846:2004 | Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation |
| I.S. EN 62974-1:2017 | MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS |
| BS EN 61557-14:2013 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Equipment for testing the safety of electrical equipment of machinery |
| BS EN 61547:2009 | Equipment for general lighting purposes. EMC immunity requirements |
| BS EN 60947-5-9:2007 | Low-voltage switchgear and controlgear Control circuit devices and switching elements. Flow rate switches |
| EN 62488-2:2017 | Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC |
| UNE-EN 12405-2:2013 | Gas meters - Conversion devices - Part 2: Energy conversion |
| NF EN 50491-5-1 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| CSA C900.4 : 2013 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| CEI EN 50412-2-1 : 2006 | POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS |
| UNI EN 16314 : 2013 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| CEI EN 50491-5-1 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| I.S. EN 60044-8:2002 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| EN 55035:2017 | Electromagnetic compatibility of multimedia equipment - Immunity requirements |
| I.S. EN 61131-6:2012 | PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012 (EQV)) |
| I.S. EN 60947-1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| I.S. EN 61298-3:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES |
| EN 50470-1:2006 | Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
| I.S. EN 55024:2010 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
| PREN 50270 : DRAFT 2013 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| I.S. EN 60846:2004 | RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION |
| I.S. EN 60255-26:2013 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS (IEC 60255-26:2013 (EQV)) |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 61812-1:2011 | Time relays for industrial and residential use Requirements and tests |
| UNE-EN 50121-4:2017 | Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
| 17/30356731 DC : 0 | BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| UNE-EN 1434-4:2016 | Heat meters - Part 4: Pattern approval tests |
| I.S. EN 55035:2017 | ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS |
| I.S. EN 50293:2012 | ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY |
| BS EN 809:1998+A1:2009 | Pumps and pump units for liquids. Common safety requirements |
| I.S. EN 61000-6-2:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005 (EQV)) |
| I.S. EN 60947-5-9:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES |
| I.S. EN 60268-4:2014 | SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES |
| I.S. EN 61526:2013 | RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS (IEC 61526:2010 (MOD)) |
| I.S. EN 50491-5-1:2010 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| EN 61800-3 : 2004 AMD 1 2012 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011) |
| DIN EN 12405-1:2011-04 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| UNE-EN 61439-1:2012 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| BS EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies General rules |
| EN 50065-2-1 : 2003 AMD 1 2005 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS |
| EN 50065-2-2:2003/A1:2005/corrigendum Oct. 2006 | SIGNALING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS |
| EN 61514:2002 | Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| EN 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
| EN 60846-1:2014 | Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors |
| EN 60601-2-30:2000 | Medical electrical equipment - Part 2-30: Particular requirements for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment |
| EN 61000-4-1:2007 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
| EN 61481-2:2014 | Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
| EN 50065-2-3 : 2003 AMD 1 2005 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148.5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS |
| EN 62282-3-201:2017 | Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems |
| EN 61326:1997/A3:2003 | |
| EN 55024 : 2010 AMD 1 2015 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 24:2010/A1:2015) |
| EN 62534:2015 | Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material |
| EN 12405-3:2015 | Gas meters - Conversion devices - Part 3: Flow computer |
| EN 12953-9:2007 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| EN 60846:2004 | Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation |
| EN 60439-1:1999/A1:2004 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| EN 62252:2004 | Maritime navigation and radiocommunication equipment and systems - Radar for craft not in compliance with IMO SOLAS Chapter V - Performance requirements, methods of test and required test results |
| EN 61557-16:2015 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment |
| EN 50263:1999 | Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment |
| EN 50491-5-2:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
| EN 60268-4:2014 | Sound system equipment - Part 4: Microphones |
| EN 50370-2:2003 | Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity |
| EN 50491-5-1:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up |
| EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| EN 50270:2015 | Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| EN 60255-26:2013/AC:2013 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS |
| EN 61098:2007 | Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies |
| EN 61812-1:2011 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| EN 60947-5-9:2007 | Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| UNE-EN 809:1999 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| IEC 61000-2-4:2002 | Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 61000-2-4:2002/AC:2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.