IEEE 241 : 1990
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS
Withdrawn date
17-10-2023
Published date
18-09-1991
Sorry this product is not available in your region.
1. Introduction
2. Load Characteristics
3. Voltage Considerations
4. Power Sources and Distribution Systems
5. Power Distribution Apparatus
6. Controllers
7. Services, Vaults, and Electrical Equipment Rooms
8. Wiring Systems
9. System Protection and Coordination
10. Lighting
11. Electric Space Conditioning
12. Transportation
13. Communication and Signal System Planning
14. Facility Automation
15. Expansion, Modernization, and Rehabilitation
16. Special Requirements by Occupancy
17. Electrical Energy Management
IEEE Std 241-1990, IEEE Recommended Practice for Electric Power Systems in Commercial Buildings, commonly known as the (Gray Book) is published by the Institute of Electrical and Electronics Engineers (IEEE) to provide a recommended practice for the electrical design of commercial buildings.
| DocumentType |
Standard
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Withdrawn
|
| IEEE 902-1998 | IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book) |
| BS EN 60695-1-40:2014 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids |
| UFC 3-501-01 : 2015 | UNIFIED FACILITIES CRITERIA - ELECTRICAL ENGINEERING |
| IEEE DRAFT C37.95 : D6 99 | DRAFT GUIDE FOR PROTECTIVE RELAYING OF UTILITY CONSUMER INTERCONNECTIONS |
| FIPS PUB 94 : 0 | GUIDELINE ON ELECTRICAL POWER FOR ADP INSTALLATIONS |
| IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
| IEEE 3001.8-2013 | IEEE Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems |
| IEEE C37.20.2-2015 | IEEE Standard for Metal-Clad Switchgear |
| NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
| IEC 60695-1-40:2013 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| IEEE 1827-2016 | IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities |
| IEC TS 60695-1-40:2002 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| IEEE 3007.1 : 2010 | RECOMMENDED PRACTICE FOR THE OPERATION AND MANAGEMENT OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| NETA ATS : 2017 | ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
| IEEE 3004.5-2014 | IEEE Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems |
| IEEE C37.13-2015 | IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
| ANSI/NEMA AB 3:2013 | Molded-Case Circuit Breakers and Their Application |
| IEEE 602 : 2007 | ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES |
| IEEE 1100 : 2005 | POWERING AND GROUNDING ELECTRONIC EQUIPMENT |
| 12/30269145 DC : 0 | BS EN 60695-1-40 ED 1.0 - FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
| I.S. EN 60695-1-40:2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
| IEEE 1547.2 : 2008 | APPLICATION GUIDE FOR IEEE STD 1547[TM], IEEE STANDARD FOR INTERCONNECTING DISTRIBUTED RESOURCES WITH ELECTRIC POWER SYSTEMS |
| IEEE 3001.2:2017 | IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems |
| ANSI/PIMA IT7.100:1993 (R1999) | AUDIOVISUAL SYSTEMS - RECOMMENDED PRACTICE FOR DETERMINING THE DESIGN OF TEACHING-LEARNING SPACES WHERE AUDIOVISUAL EQUIPMENT IS USED |
| UNE-EN 60695-1-40:2014 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| IEEE DRAFT 551 : D5 2005 | CALCULATING AC SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| IEEE 3007.3-2012 | IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems |
| IEEE C37.13.1-2006 | IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| IEEE C37.121-2012 | GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS |
| IEEE C37.230-2007 | IEEE Guide for Protective Relay Applications to Distribution Lines |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| IEEE C37.27-2008 REDLINE | IEEE Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses |
| CEI EN 60695-1-40 : 2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
| IEEE C37.121-2012 REDLINE | IEEE Guide for Switchgear - Unit Substation - Requirements |
| IEEE 551 : 2006 | CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| IEEE C37.20.3-2013 REDLINE | IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
| IEEE C37.21-2005 | IEEE Standard for Control Switchboards |
| IEEE C37.20.1-2015 | IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
| EN 60695-1-40:2014 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| NEMA HP 100.4 : 1991(R2010) | HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ECTFE FLUOROPOLYMERS |
| IEEE 960 : 1993 | FASTBUS MODULAR HIGH-SPEED DATA ACQUISITION AND CONTROL SYSTEM TOGETHER WITH 1177-1993 IEEE FASTBUS STANDARD ROUTINES |
| IEEE C37.12-2008 | SPECIFICATION GUIDE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS BASED ON A SYMMETRICAL CURRENT BASIS |
| ASME A17.2 : 2014 | Guide for Inspection of Elevators, Escalators, and Moving Walks |
| IEEE 519-2014 REDLINE | IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems |
| UL 268A:4ED 2008-12-11 | Smoke Detectors for Duct Application |
| NFPA 72B : 1986 | INSTALLATION, MAINTENANCE, AND USE OF AUXILIARY PROTECTIVE SIGNALING SYSTEMS |
| IEEE C37.20.1-2015 | IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
| IEEE C37.46-2010 | FOR HIGH VOLTAGE EXPULSION AND CURRENT-LIMITING TYPE POWER CLASS FUSES AND FUSE DISCONNECTING SWITCHES |
| IEEE C57.12.59-2015 | IEEE Guide for Dry-Type Transformer Through-Fault Current Duration |
| IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
| IEEE 979-2012 | IEEE Guide for Substation Fire Protection |
| NEMA BU 1.1:2010 | General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or Less |
| IEEE C37.95-2014 | IEEE Guide for Protective Relaying of Utility-Consumer Interconnections |
| NFPA 19911 : 1991 | FIRE PROTECTION OF MUSEUMS AND MUSEUM COLLECTIONS |
| ANSI C37.5 : 1979 | METHODS FOR DETERMINATION VALUES OF A SINUSOIDAL CURRENT WAVE, A NORMAL FREQUENCY RECOVERY VOLTAGE AND A GUIDE FOR CALCULATION OF FAULT CURRENT APPLICATION OF AC HIGH VOLTAGE CIRCUIT BREAKERS |
| NFPA 75 : 2017 | FIRE PROTECTION OF INFORMATION TECHNOLOGY EQUIPMENT |
| NEMA MG 11 : 1977(R2012) | ENERGY MANAGEMENT GUIDE FOR SELECTION AND USE OF SINGLE-PHASE MOTORS |
| NEMA PB 1:2011 | Panelboards |
| IEEE C57.12.01-2015 REDLINE | IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers |
| ANSI C57.12.40 : 2011 | AMERICAN NATIONAL STANDARD FOR SECONDARY NETWORK TRANSFORMERS - SUBWAY AND VAULT TYPES (LIQUID IMMERSED) - REQUIREMENTS |
| NFPA 92A : 2009 | SMOKE-CONTROL SYSTEMS UTILIZING BARRIERS AND PRESSURE DIFFERENCES |
| UL 864:10ED 2014-12-01 | Standard for Control Units and Accessories for Fire Alarm Systems |
| NEMA SB4 : 1985 | TRAINING MANUAL ON FIRE ALARM SYSTEMS |
| IEEE C57.12.20-2011 | TRANSFORMERS - STANDARD FOR OVERHEAD TYPE DISTRIBUTION TRANSFORMERS, 500 KVA AND SMALLER: HIGH VOLTAGE, 34500 VOLTS AND BELOW: LOW VOLTAGE, 7970/13800Y VOLTS AND BELOW |
| NFPA 110 : 2016 | EMERGENCY AND STANDBY POWER SYSTEMS |
| NEMA MG 10:2017 | Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors |
| NEMA SG 6:2000 | POWER SWITCHING EQUIPMENT |
| IEEE C37.42-2009 | SWITCHGEAR DISTRIBUTION CUTOUTS AND FUSE LINKS SPECIFICATIONS |
| IEEE 386-2016 | IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Rated 2.5 kV through 35 kV |
| UL 977:5ED 2012-04-30 | Fused Power-Circuit Devices |
| NEMA LA 1-2009 | SURGE ARRESTERS |
| IEEE 532-2007 REDLINE | IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| NEMA SG 2 : 1993 | HIGH VOLTAGE FUSES |
| IEEE C37.20.2-2015 | IEEE Standard for Metal-Clad Switchgear |
| NEMA HP 100.2 : 1991(R2010) | HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ETFE FLUOROPOLYMERS |
| NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
| NEMA 250 : 2014 | ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM) |
| NEMA ICS 6-1993 (R2006) | Industrial Control and Systems: Enclosures |
| UL 83:16ED 2017-07-28 | Standard for Thermoplastic-Insulated Wires and Cables |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| IEEE 592-2007 REDLINE | IEEE Standard for Exposed Semiconducting Shields on High-Voltage Cable Joints and Separable Connectors |
| ASME B20.1 : 2015 | SAFETY STANDARD FOR CONVEYORS AND RELATED EQUIPMENT |
| IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| NEMA WC 55 : 1992(R1999) | INSTRUMENTATION CABLES AND THERMOCOUPLE WIRE |
| NEMA KS 1:2013 | Heavy Duty Enclosed and Dead-Front Switches (600 Volts Maximum) |
| ASME A90.1 : 2015 | SAFETY STANDARD FOR BELT MANLIFTS |
| IEEE 493 : 2007 | DESIGN OF RELIABLE INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| WC 5-1992 | THERMOPLASTIC-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY |
| NFPA 110A : 1989 | STORED ENERGY EMERGENCY AND STANDBY POWER SYSTEMS |
| NEMA WC 57 : 2014 | CONTROL, THERMOCOUPLE EXTENSION, AND INSTRUMENTATION CABLES |
| NFPA 88A : 2015 | PARKING STRUCTURES |
| UL 1778:5ED 2014-06-13 | Uninterruptible Power Systems |
| WC 8:1988 | ETHYLENE-PROPYLENE-RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY |
| NFPA 204M : 1991 | SMOKE AND HEAT VENTING |
| ICC A117.1 : 2009 | ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES |
| ANSI C37.6 : 1971 | SCHEDULE OF PREFERRED RATINGS FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A TOTAL CURRENT BASIS |
| NEMA HP 100.3 : 1991(R2010) | HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH CROSS-LINKED (THERMOSET) POLYOLEFIN (XLPO) |
| NFPA 912 : 1993 | FIRE PROTECTION IN PLACES OF WORSHIP |
| UL 857:13ED 2009-03-25 | Busways |
| ANSI C12.1 : 2014 | ELECTRIC METERS - CODE FOR ELECTRICITY METERING |
| NEMA BU 1:2002 | Busways |
| NEMA ST 20:2014 | Dry Type Transformers for General Applications |
| NFPA 72E : 1990 | AUTOMATIC FIRE DETECTORS |
| NEMA HP 100:1991(R2010) | High-Temperature Instrumentation and Control Cables |
| IEEE C37.20.3-2013 REDLINE | IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| IEEE C37.010-1999 | IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| IEEE C37.13-2015 | IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
| IEEE 80-2013 REDLINE | IEEE Guide for Safety in AC Substation Grounding |
| ANSI C84.1 : 2016 | ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ) |
| MIL-HDBK-217 Revision F:1991 | RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT |
| NEMA PB 2.2:2014 | Application Guide for Ground-Fault Protective Devices for Equipment |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| IEEE 142 : 2007 | GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| IEEE C57.109-1993 | IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEEE C37.011-2011 REDLINE | IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers |
| IEEE C37.06-2009 | AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES |
| IEEE C37.09-1999 | IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| WC 3-1992 | RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY |
| NEMA HP 100.1 : 1991(R2010) | HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH FEP FLUOROCARBONS |
| NEMA HE 1 : 80(R1986) | MANUAL FOR CALCULATING HEAT LOSS AND HEAT GAIN FOR ELECTRIC COMFORT CONDITIONING |
| IEEE C37.012-2014 | IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V |
| IES RP 1 : 2004 | PRACTICE FOR OFFICE LIGHTING |
| NEMA ICS 1 : 2000(R2015) | INDUSTRIAL CONTROL AND SYSTEMS: GENERAL REQUIREMENTS |
| IES LE 1 : 1995 | VIEWS ON THE VISUAL ENVIRONMENT |
| NFPA 72H : 1988 | TESTING PROCEDURES FOR LOCAL, AUXILIARY, REMOTE STATION, AND PROPRIETARY PROTECTIVE SIGNALING SYSTEMS |
| IEEE 404-2012 | IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV |
| NFPA 72A : 1987 | INSTALLATION, MAINTENANCE, AND USE OF LOCAL PROTECTIVE SIGNALING SYSTEMS |
| UL 13:4ED 2015-03-18 | Power-Limited Circuit Cables |
| IEEE 980-2013 | IEEE Guide for Containment and Control of Oil Spills in Substations |
| NEMA PB 2:2011 | Deadfront Distribution Switchboards |
| NFPA 72D : 1986 | INSTALLATION, MAINTENANCE, AND USE OF PROPRIETARY PROTECTIVE SIGNALING SYSTEMS |
| IEEE 112-2004 | IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
| ANSI C92.2 : 1987 | POWER-SYSTEMS-ALTERNATING-CURRENT ELECTRICAL SYSTEMS AND EQUIPMENT OPERATING AT VOLTAGES ABOVE 230 KILOVOLTS NOMINAL-PREFERRED VOLTAGE RATING, |
| NFPA 88B : 1997 | REPAIR GARAGES |
| IEEE 602 : 2007 | ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES |
| UL 916:5ED 2015-10-22 | Energy Management Equipment |
| NEMA ICS 2:2008 | Controllers, Contactors and Overload Relays Rated 600 V |
| NFPA 72C : 1986 | INSTALLATION, MAINTENANCE, AND USE OF REMOTE STATION PROTECTIVE SIGNALING SYSTEMS |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| IEEE C57.94-1982 | IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers |
| IEEE C37.30-1997 | IEEE Standard Requirements for High Voltage Switches |
| NEMA AB 1 | Molded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker Enclosures |
| IEEE 400-2012 REDLINE | IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above |
| NFPA 72F : 1985 | INSTALLATION, MAINTENANCE, AND USE OF EMERGENCY VOICE/ALARM COMMUNICATION SYSTEMS |
| IEEE C37.04-1999 | IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers |
| NFPA 72G : 1989 | INSTALLATION, MAINTENANCE, AND USE OF NOTIFICATION APPLIANCES FOR PROTECTIVE SIGNALING SYSTEMS |
| IEEE 575-2014 | IEEE Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV |
| ASME A17.4 : 2015 | GUIDE FOR EMERGENCY PERSONNEL (INCLUDES EVACUATION PROCEDURES AND FIREFIGHTERS SERVICE OPERATING PROCEDURES) |
| NFPA 20 : 2016 | INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION |
| IEEE 693-2005 | IEEE Recommended Practice for Seismic Design of Substations |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| ASHRAE 114 : 0 | ENERGY MANAGEMENT CONTROL SYSTEMS INSTRUMENTATION |
| IEEE C57.110-2008 REDLINE | IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents |
| ISA RP60.8 : 1978 | ELECTRICAL GUIDE FOR CONTROL CENTERS |
| NEMA WC 50-1976/ICEA P-53-426 Second Edition (R1993, R1999) | AMPACITIES INCLUDING EFFECT OF SHIELD LOSSES FOR SINGLE-CONDUCTOR SOLID-DIELECTRIC POWER CABLE, 15 KV THROUGH 69 KV (COPPER AND ALUMINUM CONDUCTORS) |
| WC 7-1988 | CROSS-LINKED-THERMOSETTING-POLYETHYLENE-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.