ISO 468:1982
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Surface roughness — Parameters, their values and general rules for specifying requirements
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
23-09-2021
Language(s)
French, English
Published date
01-08-1982
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| UNI ISO 468 : 1991 | Identical |
| DIN 4763:1981-03 | Similar to |
| UNE 82301:1986 | Similar to |
| NBN EN 27963 : 1992 | Identical |
| BS 1134-1:1988 | Similar to |
| BS 1134-2:1972 | Similar to |
| DIN ISO 1302:1993-12 | TECHNICAL DRAWINGS - METHOD OF INDICATING SURFACE TEXTURE |
| I.S. EN 60193:2000 | HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - MODEL ACCEPTANCE TESTS (IEC 60193:1999) |
| BS 6516-1:1984 | Solderless connections Solderless wrapped connections. General requirements, test methods and practical guidance. |
| 95/700349 DC : DRAFT FEB 95 | DRAFT STANDARD FOR FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED PT 3. COPPER ALLOY AND COMPOSITE FLANGES |
| 09/30208363 DC : 0 | BS EN 4816 - AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL, TECHNICAL SPECIFICATION, INCH SERIES |
| BS EN 61076-4-102:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
| BS EN 4816:2017 | Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal. Technical specification. Inch series |
| 04/30098257 DC : DRAFT MAY 2004 | EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| BS 2782-7:Method 722B:1996 | Methods of testing plastics. Rheological properties Determination of the fluidity of plastics using capillary and slit-die rheometers |
| I.S. EN 21559:1992 | DENTISTRY - ALLOYS FOR DENTAL AMALGAM |
| I.S. EN 1015-11:2000 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| 16/30337092 DC | BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements |
| BS 6140-1:1981 | Test equipment for generating vibration Methods of describing characteristics of electrodynamic test equipment for generating vibration |
| 15/30297370 DC : 0 | BS ISO 19487 - METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED NICKEL-CERAMICS COMPOSITE COATING |
| I.S. CECC 75301-802:1995 | RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS |
| 00/707535 DC : DRAFT APR 2000 | PREN 13885:2000 - FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS 6494-1:1984 | Hydraulic fluid power valve mounting surfaces Specification for four-port directional control valves |
| BS 7389-1:1990 | Pneumatic fluid power valve mounting surfaces Specification for five-port directional control valves (without electrical connector) |
| 00/715331 DC : 0 | ISO/CD 8434-6 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
| CSA C22.2 No. 60079.1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| 00/706811 DC : DRAFT MAR 2000 | BS EN 13870 - FOOD PROCESSING MACHINERY - CHOP CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS ISO 7425-1:1988 | Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerances Piston seal housings |
| DIN 4762:1989-01 | SURFACE ROUGHNESS; TERMINOLOGY; SURFACE & ITS PARAMETERS |
| 04/30074898 DC : DRAFT MAY 2004 | EN ISO 4545-3 - METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 97/707829 DC : DRAFT MAY 1997 | PREN 12851 - FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 60735 : 1998 | MEASURING METHODS FOR VIDEO TAPE PROPERTIES |
| DD ENV 1999-1.1 : DRAFT DEC 2000 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 101: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| BS 6494-4:1989 | Hydraulic fluid power valve mounting surfaces. Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves |
| BS 7251-14:1998 | Orthopaedic joint prostheses Components for partial and total knee-joint prostheses. Articulating surfaces made of metal, ceramic and plastics materials |
| 99/711929 DC : DRAFT JUL 1999 | EN 13621 - FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 60454-2 : 2008 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| 03/100395 DC : DRAFT APR 2003 | EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
| 97/700600 DC : DRAFT JAN 1997 | PREN 3839 - AEROSPACE SERIES - ELECTROLESS NICKEL PLATING OF CORROSION RESISTANCE STEEL |
| PREN 2582 : 200P1 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - TECHNICAL SPECIFICATION |
| PREN 3389 : 200P1 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| PREN 3685 : 200P1 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION |
| STANAG 3323 : 0 | PIPE (TUBE) CONNECTIONS TO AIRCRAFT INSTRUMENTS (IMPERIAL AND METRIC) |
| UNE-EN 60079-1:2015 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| CEI EN 50109-2-3 : 1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-3: PARTICULAR REQUIREMENTS FOR CONTACTS OF ELECTRICAL CONNECTORS |
| PREN 1015-11 : DRAFT 2017 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| GOST R ISO 7206-2 : 2005 | IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METALLIC, CERAMIC AND PLASTICS MATERIALS |
| I.S. EN 61076-4-103:1999 | CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2.5 MM |
| ISO 10372:1992 | Hydraulic fluid power — Four- and five-port servovalves — Mounting surfaces |
| IEC 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
| DIN EN 13378:2016-05 (Draft) | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 26157-3:1992 | Fasteners. Surface discontinuities. Bolts, screws and studs for special requirements |
| BS EN 12855 : 2003 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 21864:1994 | Information technology. Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange. 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi) NRZ1 |
| BS EN 1974 : 1998 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 493:1992 | Fasteners. Surface discontinuities. Nuts |
| IEC 60603-14:1998 | Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment |
| BS EN 1707:1997 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment. Lock fittings |
| BS EN ISO 1559:2001 | Dental materials. Alloys for dental amalgam |
| BS EN 12342 : 1998 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| BS EN 13378 : 2001 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 1974:1998+A1:2009 | Food processing machinery - Slicing machines - Safety and hygiene requirements |
| DIN EN 12342:1998-09 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| DIN EN 12342:2010-01 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| I.S. EN 13289:2001 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 50109-2-3:1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors |
| EN 13379:2001+A1:2013 | Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements |
| EN 60603-12:1998 | Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
| EN 50109-2-4:1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ |
| EN 61076-4-105:1998 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
| EN 10003-3 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR BRINELL HARDNESS TESTING MACHINES |
| EN 12462:1998 | Biotechnology - Performance criteria for pumps |
| EN 60603-13:1998 | Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| EN 13378:2001+A1:2013 | Pasta processing plants - Pasta presses - Safety and hygiene requirements |
| EN 61076-4-103:1999 | Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm |
| EN 61076-4-102:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
| EN 61076-3-101:1997 | Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line |
| EN 60454-2:2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| EN 10109-3 : 1994 | METALLIC MATERIALS - HARDNESS OF TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| EN 13289:2001+A1:2013 | Pasta processing plants - Dryers and coolers - Safety and hygiene requirements |
| EN 1015-11 : 1999 AMD 1 2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| EN 12505:2000+A1:2009 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
| EN 12855:2003+A1:2010 | Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements |
| EN 60130-17:1999 | Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
| BS 2634-1:1987 | Roughness comparison specimens Specification for turned, ground, bored, milled, shaped and planed specimens |
| BS EN 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes Methods of test |
| DIN EN 60352-1:1998-04 | SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| ISO 7425-1:1988 | Hydraulic fluid power Housings for elastomer-energized, plastic-faced seals Dimensions and tolerances Part 1: Piston seal housings |
| BS EN 175201-804:2000 | Harmonized system of quality assessment for electronic components Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling |
| BS ISO 6621-2:2003 | Internal combustion engines. Piston rings Inspection measuring principles |
| BS EN 4814:2017 | Aerospace series. Flange couplings up to 21 000 kPa. Technical specification. Inch series |
| BS EN 60130-17:1999 | Connectors for frequencies below 3 MHz Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
| I.S. EN ISO 4600:1998 | PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - BALL OR PIN IMPRESSION METHOD |
| NFU 60 010 : 98 XP | FOOD PRODUCTION EQUIPMENT - DESIGN PRINCIPLES FOR ENSURING THE CLEARABILITY OF THE MACHINES AND EQUIPMENT USED IN THE COTTAGE INDUSTRY, THE FOOD RETAIL TRADE AND IN THE CATERING TRADE |
| BS EN 61076-3-101 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE |
| I.S. EN 12218:1999 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT |
| BS ISO 13012:1998 | Rolling bearings, linear motion, recirculating ball, sleeve type. Accessories |
| DIN ISO 4379:1995-10 | PLAIN BEARINGS - COPPER ALLOY BUSHES |
| I.S. EN 60603-14:2000 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 14: DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS FOR LOW-FREQUENCY AUDIO AND VIDEO APPLICATIONS SUCH AS AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT |
| BS EN 61076-4-103:1999 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards |
| BS ISO 10372:1992 | Hydraulic fluid power. Four-and five-port servovalves. Mounting surfaces |
| BS ISO 1302:1992 | Technical drawings. Method of indicating surface texture |
| BS EN 61076-4-104:1999 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm - Detail specification for two part modular connectors (with optional shielding plates) for printed boards and backplanes, basic grid 2,0 mm, with terminations on a multiple grid of 0,5 mm |
| BS EN 50109-2-5:1996 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements Termination of twin-ax cable for databus applications |
| BS 2M 60:1993 | Specification for separable tube fittings, 24° cone, for aerospace fluid systems |
| CEI EN 50109-2-5 : 1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-5: PARTICULAR REQUIREMENTS FOR THE TERMINATION OF TWIN-AX CABLE FOR DATABUS APPLICATIONS |
| 06/30140687 DC : DRAFT MAY 2006 | ISO 815-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 2: LOW TEMPERATURES |
| DD ENV 1071-2:1994 | Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by the cap grinding method |
| 00/121221 DC : DRAFT MARCH 2000 | ISO/CE 1133 - PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
| BS EN 60352-1:1998 | Solderless connections Wrapped connections. General requirements, test methods and practical guidance |
| BS 6494-6:1989 | Hydraulic fluid power valve mounting surfaces Specification for pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves |
| PREN 4816 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL - TECHNICAL SPECIFICATION - INCH SERIES |
| DIN 3969-1:1991-10 | SURFACE ROUGHNESS OF TOOTH FLANKS; ROUGHNESS PARAMETERS, SURFACE GRADES |
| ISO 2037:1992 | Stainless steel tubes for the food industry |
| I.S. EN 60603-2:1998 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
| SAE MA2005B | Tube Fittings, Aerospace Fluid Systems, Separable, For 24° Cone, General Specification, Metric (ISO 7169) |
| I.S. EN ISO 13473-1:2004 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH |
| ISO 8688-1:1989 | Tool life testing in milling — Part 1: Face milling |
| IEC 60874-9:1993 | Connectors for optical fibres and cables - Part 9: Sectional specification for fibre optic connector - Type OF-2 |
| I.S. EN 60454-2:2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| GOST R ISO 7207-2 : 2005 | IMPLANTS FOR SURGERY - COMPONENTS FOR PARTIAL AND TOTAL KNEE JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METAL, CERAMIC AND PLASTICS MATERIALS |
| BS EN 3275:2002 | Aerospace series. Pipe coupling 8°30\' up to 28000 kPa. Dynamic beam seal. Metric series. Technical specification |
| EN ISO 2818:1996 | Plastics - Preparation of test specimens by machining (ISO 2818:1994) |
| I.S. EN 50018:2001 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| DIN EN 12855:2011-02 | Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 1974:2016-06 (Draft) | Food processing machinery - Slicing machines - Safety and hygiene requirements; German and English version prEN 1974:2016 |
| DIN EN 13379:2016-06 (Draft) | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| IEC 60130-17:1998 | Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
| IEC 61076-4-105:1995 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication . |
| BS EN 13379 : 2001 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 10109-3:1996 | Metallic materials. Hardness test Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T) |
| BS EN 27963:1992 | Specification for calibration block No. 2 for ultrasonic examination of welds |
| I.S. EN 1092-3:2003 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
| I.S. EN 13379:2001 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12855:2003 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13378:2001 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1015-11:2007-05 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| DIN EN 1974:2010-05 | Food processing machinery - Slicing machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| UNI EN 1974 : 2009 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12505:2000 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 21864:1994-05 | INFORMATION TECHNOLOGY - UNRECORDED 12,7 MM (0,5 IN) WIDE MAGNETIC TAPE FOR INFORMATION INTERCHANGE - 32 FTPMM (800 FTPI) NRZ1, 126 FTPMM (3200 FTPI) PHASE ENCODED 356 FTPMM (9042 FTPI) NRZ1 |
| I.S. EN ISO 1559:2002 | DENTAL MATERIALS - ALLOYS FOR DENTAL AMALGAM |
| DIN EN 13289:2013-05 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN ISO 815:2000-03 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET AT AMBIENT, ELEVATED OR LOW TEMPERATURES |
| DIN EN 13378:2013-05 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13379:2013-05 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1092-2:1997 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 2: CAST IRON FLANGES |
| I.S. EN 1974:1998 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS 1134-1:1988 | Assessment of surface texture Methods and instrumentation |
| BS 6393:1987 | Specification for calibration of stylus instruments |
| BS 3900-A3:1986 | Methods of test for paints Standard panels for paint testing |
| BS 7011-2.2:1998 | Consumable accessories for light microscopes. Slides Specification for materials and quality of finish |
| BS 903-A4:1990 | Physical testing of rubber Determination of compression stress-strain properties |
| BS 2782-7.720A(1997) : 1997 AMD 10722 | METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
| BS 7251-4:1997 | Orthopaedic joint prostheses Specification for articulating surfaces made of metallic, ceramic and plastics materials of hip joint prostheses |
| BS 2634-2:1987 | Roughness comparison specimens Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens |
| BS 4480-3:1993 | Plain bearings: metric series Copper alloy bushes |
| BS 7253-2:1997 | Non-metallic materials for surgical implants Specification for ceramic materials based on high purity alumina |
| BS 903-A42:1992 | Physical testing of rubber Method for determination of stress relaxation in compression at ambient and at elevated temperatures |
| CEI EN 50109-2-1 : 1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-1: PARTICULAR REQUIREMENTS FOR RADIO FREQUENCY CONNECTORS AND CONCENTRIC CONTACTS - OPEN THROAT TOOLS WITH FIXED DIES, SIZES A TO E, V AND W |
| ISO 10500:1991 | Industrial tyres and rims — Cylindrical and conical base rubber solid tyres (metric series) — Designation, dimensions and marking |
| DIN ISO 7368:1994-02 | HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES |
| BS EN 605:1992 | Paints and varnishes. Standard panels for testing |
| ISO 726:1982 | Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines |
| I.S. EN 493:1993 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
| 98/706002 DC : DRAFT APR 1998 | ISO/CD 3601-5 - FLUID SYSTEMS - SEALING DEVICES - O-RINGS - PART 5: ANTI-EXTRUSIONS DEVICES (BACK-UP RINGS) |
| BS 4480-3:1979 | Specification for plain bearings: metric series Dimensions and tolerances of solid copper alloy bushes |
| 09/30193829 DC : 0 | BS EN ISO 1797-1 - DENTAL ROTARY INSTRUMENTS - SHANKS - PART 1: SHANKS MADE OF METALS |
| BS EN 50018:2000 | Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure \'d\' |
| BS 3930-2:1991 | Conical fittings with a 6% (Luer) taper for syringes, needles and other medical equipment Specification for lock fittings |
| BS EN 3043:2008 | Aerospace series. Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286). Classification: 900 MPa/650 °C, manufacturing method optional. Technical specification |
| CECC 75301-802 : 1994 | RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS |
| BS 6412:1983 | Methods for measurement of video tape properties |
| 04/30123544 DC : DRAFT OCT 2004 | IEC 60079-1 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES 'D' |
| BS 7825-3.4:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of rubber |
| CEI EN 60603-14 : 2000 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 14: DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS FOR LOW-FREQUENCY AUDIO AND VIDEO APPLICATIONS SUCH AS AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT |
| CEI EN 50109-2-2 : 1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-2: PARTICULAR REQUIREMENTS FOR RADIO FREQUENCY CONNECTORS AND CONCENTRIC CONTACTS - OPEN THROAT TOOLS WITH REMOVABLE AND INTERCHANGEABLE DIES, SIZES A TO G, Q TO T, V AND W |
| BS EN 60603-13:1998 | Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement terminations (ID) |
| 96/712318 DC : DRAFT SEP 1996 | PREN 3079 - AEROSPACE SERIES - ADAPTORS WITH LOCKING RING UP TO 2800 KPA - TECHNICAL SPECIFICATION |
| BS EN 61076-4-105:1998 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
| BS AU 248:1993 | Specification for automotive V-ribbed belt drives. Dimensions of pulleys and belts of PK profile |
| 98/230855 DC : DRAFT APRIL 1998 | IEC 61076-4-112 - CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C, LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 112 - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS FOR PRINTED BOARDS FOR BASIC GRID OF 2,00 MM, WITH SQUARE MALE CONTACTS OF 0,50 X 0,50 MM |
| I.S. EN 60079-1:2014 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| PREN 3839 : DRAFT 1996 | AEROSPACE SERIES ELECTROLESS NICKEL PLATING OF CORROSION RESISTANCE STEEL |
| 17/30351887 DC : 0 | BS EN 1015-11 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| PREN 4814 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS UP TO 21000 KPA - TECHNICAL SPECIFICATION - INCH SERIES |
| ISO 6474:1994 | Implants for surgery Ceramic materials based on high purity alumina |
| BS EN 1015-11:1999 | Methods of test for mortar for masonry Determination of flexural and compressive strength of hardened mortar |
| PREN 3388 : 200P1 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| I.S. EN 60130-17:1999 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 17: DETAIL SPECIFICATION FOR INTERCONNECTION DEVICES WHICH PERMIT MULTI-DIRECTIONAL MATING, FOR USE WITH RECHARGEABLE BATTERIES |
| I.S. EN 61076-4-102:1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
| I.S. EN 3275:2002 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES UP TO 28 000 KPA - DYNAMIC BEAM SEAL - METRIC SERIES - TECHNICAL SPECIFICATION |
| BS EN 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines. Model acceptance tests |
| EN 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
| BS EN ISO 13473-1:2004 | Characterization of pavement texture by use of surface profiles Determination of mean profile depth |
| DIN EN ISO 13473-1:2004-07 | Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:1997) |
| IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| CECC 75101-807 : 1994 | MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRIDOF 2.5 mm - ACCORDING TO IEC 917 (DETAIL SPECIFICATION) |
| NF EN 61076 3 101 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTER-LINE |
| ISO 6621-2:2003 | Internal combustion engines Piston rings Part 2: Inspection measuring principles |
| ISO 4379:1993 | Plain bearings Copper alloy bushes |
| I.S. CECC 75101-807:1994 | MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRID OF 2.5 MM - (ACCORDING TO IEC 917) (DETAIL SPECIFICATION) |
| DIN EN 1669:1997-02 | ALUMINIUM AND ALUMINIUM ALLOYS - TEST METHODS - EARING TEST FOR SHEET AND STRIP |
| DIN EN 12505:2010-11 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements (includes Amendment A1:2009) |
| EN 175101-809:2004/corrigendum Jun. 2005 | DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
| BS EN 12505 : 2000 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13379 : 2013 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12855 : 2010 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13378 : 2013 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| BS 1751:1997 | Laboratory glassware. Specification for straight-bore glass stopcocks for general purposes |
| UNI EN 12342 : 2009 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| UNI EN 13289 : 2013 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS 2761:1983 | Specification for spherical ground joints |
| CSA C22.2 No. 60079.1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| UNI EN 12505 : 2010 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 61076-4-103 : 2001 | CONNECTORS FOR USE IN D.C. LOW - FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2,5 MM |
| BS 6494-5:1989 | Hydraulic fluid power valve mounting surfaces Specification for compensated flow-control valves |
| 06/30136465 DC : DRAFT MAY 2006 | ISO 815-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 1: AT AMBIENT AND ELEVATED TEMPERATURES |
| I.S. EN 60735:1992 | MEASURING METHODS FOR VIDEO TAPE PROPERTIES |
| BS EN ISO 2818 : 1997 | PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING |
| 99/702254 DC : DRAFT JAN 1999 | ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE |
| CEI 48-19 : 1998 | RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 2: DETAIL SPECIFICATION FOR A RANGE OF CONNECTORS, WITH ASSESSED QUALITY, WITH TRAPEZOIDAL SHAPED METAL SHELLS AND ROUND CONTACTS - FIXED SOLDER CONTACT TYPES |
| BS 7251-7:1990 | Orthopaedic joint prostheses Guide to hip joint simulators |
| 00/715165 DC : DRAFT OCT 2000 | BS EN 13954 - FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 60603-9:1998 | Connectors for frequencies below 3 MHz for use with printed boards Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) |
| NF EN 61076 4 102 : 1998 | CONNECTORS WITH ASSESSED QUALITY FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTERING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
| ISO 3685:1993 | Tool-life testing with single-point turning tools |
| 06/30145636 DC : DRAFT JULY 2006 | ISO 3547-5 - PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER |
| BS EN 60603-2:1998 | Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
| 02/206403 DC : DRAFT MAY 2002 | IEC 62231. ED.1.0 - COMPOSITE STATION POST INSULATORS FOR SUBSTATIONS WITH A.C. VOLTAGES GREATER THAN 1000 V UPTO 245 KV - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| BS 6741-1:1987 | Glossary of surface roughness terms Surface and its parameters |
| CEI EN 61076-3-101 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D/C/ LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE |
| BS 6151:1992 | Specification for breathing tubes for use with anaesthetic apparatus and ventilators |
| DIN 13950-1:1990-05 | DENTISTRY - DENTAL ROTARY INSTRUMENTS - SHANKS |
| BS EN 60603-5:1998 | Connectors for frequencies below 3 MHz for use with printed boards Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 mm) spacing |
| BS AU 50-1.5.6:1994 | Tyres and wheels. Tyres. Industrial vehicle tyres Specification for cylindrical and conical base rubber solid tyres (metric series), designation, dimensions and marking |
| 10/30202369 DC : 0 | BS ISO 13948-2 - DIESEL ENGINES - FUEL INJECTION PUMPS AND FUEL INJECTOR LOW-PRESSURE CONNECTIONS - PART 2: NON-THREADED (PUSH-ON) CONNECTIONS |
| 09/30208359 DC : 0 | BS EN 4814 - AEROSPACE SERIES - FLANGE COUPLINGS - UP TO 21000 KPA - TECHNICAL SPECIFICATION, INCH SERIES |
| CEI EN 50109-2-4 : 1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR CENTRE CONTACTS OF RF CONNECTORS, SERIES SMZ |
| CEI EN 60130-17 : 2001 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 17: DETAIL SPECIFICATION FOR INTERCONNECTION DEVICES WHICH PERMIT MULTI-DIRECTIONAL MATING, FOR USE WITH RECHARGEABLE BATTERIES |
| BS 7825-3.10:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Conditioning, sample and test piece preparation |
| 95/710329 DC : DRAFT JUL 1995 | PREN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| 00/706812 DC : DRAFT MAR 2000 | BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 60603-14:1999 | Connectors for frequencies below 3 MHz for use with printed boards Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment |
| BS ISO 6264:1998 | Hydraulic fluid power. Pressure-relief valves. Mounting surfaces |
| 13/30242622 DC : 0 | BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
| NF EN 61076 4 105 : 1999 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 105: DETAIL SPECIFICATION FOR 9 MM CIRCULAR CONNECTOR WITH 3 TO 8 CONTACTS FOR USE IN A WIDE RANGE OF APPLICATIONS INCLUDING THE TELECOMMUNICATION AND AUDIO INDUSTRY |
| BS 6494-3:1989 | Hydraulic fluid power valve mounting surfaces Specification for pressure-relief valves |
| BIS IS/ISO 6621-2 : 2003(R2014) | INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 2: INSPECTION MEASURING PRINCIPLES |
| BS ISO TR 11552:1997 | Lasers and laser-related equipment. Laser materials-processing machines. Performance specifications and benchmarks for cutting of metals |
| BS 2011-3A & B:1977 | Environmental testing. Background information Tests A (cold) and tests B (dry heat) |
| PREN 4486 : 200P1 | AEROSPACE SERIES - STEEL BALLS |
| ISO 674:1988 | Metallic materials Hardness test Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) |
| I.S. EN 50109-2-1:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PARTICULAR REQUIREMENTS FOR RADIO FREQUENCY CONNECTORS AND CONCENTRIC CONTACTS - OPEN THROAT TOOLS WITH FIXED DIES, SIZES A TO E, V AND W |
| I.S. EN 50109-2-2:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PARTICULAR REQUIREMENTS FOR RADIO FREQUENCY CONNECTORS AND CONCENTRIC CONTACTS - OPEN THROAT WITH REMOVABLE AND INTERCHANGEABLE DIES, SIZES A TO G, Q TO T, V AND W |
| PREN 13378 : DRAFT 2016 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 1355:1989 | Metallic materials Hardness test Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) |
| ISO 8688-2:1989 | Tool life testing in milling — Part 2: End milling |
| ISO 10648-1:1997 | Containment enclosures — Part 1: Design principles |
| CEI EN 60352-1 : 1998 | SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| EN 3275:2002 | Aerospace series - Pipe coupling 8°30' up to 28 000 kPa - Dynamic beam seal - Metric series - Technical specification |
| IEC 60874-7:1993 | Connectors for optical fibres and cables - Part 7: Sectional specification for fibre optic connector - Type FC |
| I.S. ENV 1999-1-1:1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| I.S. EN 61076-4-104:1999 | CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GRID OF 2.0 MM WITH TERMINATIONS ON A MULTIPLE GRID OF 0.5 MM |
| I.S. EN 50109-2-5:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-5: PARTICULAR REQUIREMENTS FOR THE TERMINATION OF TWIN-AX CABLE FOR DATABUS APPLICATIONS |
| NF EN 1974 : 1998 + A1 2009 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| IEC 60874-8:1993 | Connectors for optical fibres and cables - Part 8: Sectional specification for fibre optic connector - Type D |
| DIN EN 1092-3:2004-10 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004 |
| DIN EN 26157-3:1991-12 | FASTENERS - SURFACE DISCONTINUITIES - BOLTS, SCREWS AND STUDS SUBJECT FOR SPECIAL REQUIREMENTS |
| DIN EN ISO 6157-2:2004-10 | Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) |
| IEC 61076-4-101:2001 | Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
| IEC 61076-3-101:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line |
| ISO 6157-3:1988 | Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements |
| ISO 6157-2:1995 | Fasteners Surface discontinuities Part 2: Nuts |
| BS EN 12462:1998 | Biotechnology. Performance criteria for pumps |
| BS EN 13289 : 2001 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 12505:2001 | FOOD PROCESSING MACHINERY. CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS. SAFETY AND HYGIENE REQUIREMENTS |
| ISO 4600:1992 | Plastics Determination of environmental stress cracking (ESC) Ball or pin impression method |
| ISO/IEC 1864:1992 | Information technology Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ1 |
| IEC 60603-12:1992 | Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
| IEC 61076-4-102:1997 | Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917 |
| IEC 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| IEC 60603-13:1995 | Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) |
| ISO 6264:1998 | Hydraulic fluid power — Pressure-relief valves — Mounting surfaces |
| IEC 60735:1991 | Measuring methods for video tape properties |
| BS EN ISO 6157-2:2004 | Fasteners. Surface discontinuities Nuts |
| BS EN ISO 4600:1998 | Plastics. Determination of environmental stress cracking (ESC). Ball or pin impression method |
| BS EN 1092-3:2003 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges |
| BS EN 1092-2:1997 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Cast iron flanges |
| EN 175201-804:1999 | Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling |
| EN 603-1:1996 | Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery |
| EN ISO 1559 : 2001 | DENTAL MATERIALS - ALLOYS FOR DENTAL AMALGAM |
| EN 605 : 1992 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
| EN 12342:1998+A1:2009 | Breathing tubes intended for use with anaesthetic apparatus and ventilators |
| EN 26157-3:1991 | Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988) |
| EN 1707:1996 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings |
| EN 4814:2017 | Aerospace series - Flange couplings up to 21 000 kPa - Technical specification - Inch series |
| EN 1818:1998 | Resilient floor coverings - Determination of the effect of loaded heavy duty castors |
| EN 21864 : 1993 | |
| EN 27963 : 1992 | SPECIFICATION FOR CALIBRATION BLOCK NO. 2 FOR ULTRASONIC EXAMINATION OF WELDS |
| EN 26157-1:1991 | Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988) |
| EN ISO 4600 : 1997 | PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - BALL OR PIN IMPRESSION METHOD |
| EN ISO 6157-2:2004 | Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) |
| EN 493 : 1992 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
| EN 3043:2008 | Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification |
| EN 1669:1996 | Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip |
| EN 4816:2017 | Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal - Technical specification - Inch series |
| ENV 1999-1-1 : 1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| EN 21559 : 1991 | DENTISTRY - ALLOYS FOR DENTAL AMALGAM |
| BS A 295:1985 | Methods of test for self-locking nuts with maximum operating temperature less than or equal to 425°C |
| I.S. EN 50109-2-3:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-3: PARTICULAR REQUIREMENTS FOR CONTACTS OF ELECTRICAL CONNECTORS |
| 17/30309711 DC : 0 | BS EN ISO 13473-1 - CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH |
| I.S. EN 10003-3:1995 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR BRINELL HARDNESS TESTING MACHINES |
| BS EN 50109-2-4:1996 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements Centre contacts of RF connectors, series SMZ |
| BS 2634-3:1980 | Specification for roughness comparison specimens Cast surfaces |
| I.S. EN 10109-3:1995 | METALLIC MATERIALS - HARDNESS TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| I.S. EN 4816:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL - TECHNICAL SPECIFICATION - INCH SERIES |
| I.S. EN ISO 6157-2:2004 | FASTENERS - SURFACE DISCONTINUITIES - PART 2: NUTS |
| NF EN 3275 : 2002 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES UP TO 28 000 KPA - DYNAMIC BEAM SEAL - METRIC SERIES - TECHNICAL SPECIFICATION |
| BS EN 60603-8:1998 | Connectors for frequencies below 3 MHz for use with printed boards Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm |
| NSF 14159 : 1999 | SAFETY OF MACHINERY - HYGIENE REQUIREMENTS FOR THE DESIGN OF MACHINERY |
| 96/702228 DC : 0 | PREN 4231 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES UP TO 1000 KPA; METRIC SERIES - TECHNICAL SPECIFICATION |
| CEI EN 61076-4-104 : 2001 | CONNECTORS FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GIRD OF 2,0 MMS WITH TERMINATIONS ON A MULTIPLE GIRD OF 0,5 MM |
| BS EN 175101-802:2000 | Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
| 98/717506 DC : DRAFT DEC 1998 | PREN 13389 - FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 61076-4-102 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
| BS M 60:1986 | Specification for separable tube fittings for fluid systems |
| BS EN 60735:1992 | Methods for measurement of video tape properties |
| BS EN 175101-809:2004 | Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality |
| 11/30247086 DC : 0 | BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D" |
| NF ISO 10648-1 : 1998 | CONTAINMENT ENCLOSURES - PART 1: DESIGN PRINCIPLES |
| 00/708470 DC : DRAFT APR 2000 | PREN 13886 - FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH STIRRER AND/OR MIXER - SAFETY AND HYGIENE |
| BS 2782-8.831A.B(1993) : 1993 AMD 9929 | METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) BY THE BALL OR PIN IMPRESSION METHOD |
| PREN 3043 : 200P2 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 900 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| BS 7251-4:1990 | Orthopaedic joint prostheses Specification for bearing surfaces of hip joint prostheses |
| CSA ISO 5367 : 2014 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| ISO 13473-1:1997 | Characterization of pavement texture by use of surface profiles Part 1: Determination of Mean Profile Depth |
| PREN 3078 : 200P1 | AEROSPACE SERIES - P, Q AND SADDLE CLAMPS WITH RUBBER CUSHION - TECHNICAL SPECIFICATION |
| BS 7620:1993 | Specification for industrial belt drives. Dimensions of pulleys and V-ribbed belts of PH, PJ, PK, PL and PM profiles |
| BIS IS/IEC 60079-1 : 2007 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| DIN EN 50018 : 2001 AMD 1 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| PREN 3079 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES UP TO 28000 KPA - ADAPTORS - METRIC SERIES - TECHNICAL SPECIFICATION |
| CEI EN 60193 : 2000 | HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES MODEL ACCEPTANCE TESTS |
| PREN 2130 : 200P1 | AEROSPACE SERIES - CORROSION RESISTING STEEL PRECISION BALL BEARINGS FOR INSTRUMENTS AND EQUIPMENT - TECHNICAL SPECIFICATION |
| I.S. EN 3043:2008 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 900 MPA/650 DEGREES C, MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| I.S. EN 50109-2-4:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR CENTRE CONTACTS OF RF CONNECTORS, SERIES SMZ |
| I.S. EN 4814:2017 | AEROSPACE SERIES - FLANGE COUPLINGS UP TO 21000 KPA - TECHNICAL SPECIFICATION - INCH SERIES |
| ISO 594-2:1998 | Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 2: Lock fittings |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| BS 4480-9:1995 | Plain bearings: metric series Checking the outside diameter of wrapped bushes |
| EN ISO 13473-1:2004 | Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth (ISO 13473-1:1997) |
| NF EN 3043 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 900 MPA/650 DEGREES C, MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| CSA ISO 7206-2 : 0 | IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METALLIC, CERAMIC AND PLASTICS MATERIALS |
| CEI EN 61076-4-105 : 2001 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR 9 MM CIRCULAR CONNECTOR WITH 3 TO 8 CONTACTS FOR USE IN A WIDE RANGE OF APPLICATIONS INCLUDING THE TELECOMMUNICATION= AND AUDIO INDUSTRY |
| I.S. EN 175101-809:2004 | DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY |
| NF EN 1015-11 : 2000 AMD 1 2007 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| DIN EN 13289:2015-12 (Draft) | Pasta processing plant - Dryers and coolers - Safety and hygiene requirements; German and English version prEN 13289:2015 |
| BS EN 1818:1999 | Resilient floor coverings. Determination of the effect of loaded heavy duty castors |
| BS EN 10003-3:1995 | Metallic materials. Brinell hardness test Calibration of standardized blocks to be used for Brinell hardness testing machines |
| 13/30286778 DC : 0 | BS EN 60079-1 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| IEC 61076-4-104:1999 | Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm |
| IEC 60603-2:1995 | Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
| EN 60603-2:1998/A1:2005 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
| EN 175101-802:1999 | Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
| EN 60735:1991 | Measuring methods for video tape properties |
| EN 50109-2-1:1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-1: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with fixed dies, sizes A to E, V and W |
| DIN EN 493:1992-07 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
| EN 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| EN 50109-2-5:1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications |
| EN 12218:1998/A1:2002 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT |
| EN 50018 : 2000 AMD 1 2002 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 50109-2-2:1995/AC:2012 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-2: PARTICULAR REQUIREMENTS FOR RADIO FREQUENCY CONNECTORS AND CONCENTRIC CONTACTS - OPEN THROAT TOOLS WITH REMOVABLE AND INTERCHANGEABLE DIES, SIZES A TO G, Q TO T, V AND W |
| EN 61076-4-104:1999 | Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm |
| EN 60603-14:1999 | Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment |
| BS 3900-A6:1986 | Methods of test for paints Determination of flow time by use of flow cups |
| BS 2782-9.902A(1992) : 1992 AMD 10344 | METHODS OF TESTING PLASTICS - SAMPLING AND TEST SPECIMEN PREPARATION - PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOSETTING MATERIALS |
| BS 2782-9.901A(1988) : 1988 AMD 14419 | METHODS OF TESTING PLASTICS - SAMPLING AND TEST SPECIMEN PREPARATION - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| ISO 4287-1:1984 | Surface roughness — Terminology — Part 1: Surface and its parameters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.