EN 10051:2010
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
Withdrawn date
31-05-2011
Published date
24-11-2010
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Form of supply
6 Tolerances for sheet/plate
7 Tolerances for wide strip and strip split from wide strip
8 Measurement
Annex A (informative) - Standards with steel grades for this
dimensional standard
Annex B (normative) - Options
This European Standard specifies tolerances on dimensions and shape for continuously hot-rolled uncoated plate/sheet and strip with a maximum width of 2 200 mm of non-alloy and alloy steels in accordance with Table 1 (see also Annex A). This European Standard also applies to hot-rolled strip for cold rolling.
This European Standard does not apply to stainless steels and not to hot-rolled strip rolled in widths w < 600 mm (see EN 10048).
| Committee |
CEN/TC 459/SC 3
|
| DevelopmentNote |
Supersedes PREN 10051. (04/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| NEN EN 10051 : 2010 | Identical |
| DIN EN 10051:2011-02 | Identical |
| PN EN 10051 : 2011 | Identical |
| SS-EN 10051:2010 | Identical |
| UNI EN 10051 : 2011 | Identical |
| NF EN 10051 : 2011 | Identical |
| NBN EN 10048 : 1996 | Identical |
| UNE-EN 10051:2012 | Identical |
| SN EN 10051 : 2011 | Identical |
| BS EN 10051:2010 | Identical |
| I.S. EN 10051:2010 | Identical |
| NBN EN 10051 : 2011 | Identical |
| NS EN 10051 : 2010 | Identical |
| ONORM EN 10051 : 2011 | Identical |
| SS-EN 10051:2024 | Identical |
| DS EN 10051 : 2010 | Identical |
| UNE 36560:1992 | Identical |
| 11/30239491 DC : 0 | BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| DIN EN 10152:2009-07 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN 17459:1992-09 | SEAMLESS CIRCULAR HIGH-TEMPERATURE AUSTENITIC STEEL TUBES - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10338:2015-10 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| 11/30239476 DC : 0 | BS EN 10025-2 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| 10/30216705 DC : 0 | BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| PREN 10207 : DRAFT 2015 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| DIN EN 16983:2017-09 | DISC SPRINGS - QUALITY SPECIFICATIONS - DIMENSIONS |
| BS EN 10343:2009 | Steels for quenching and tempering for construction purposes. Technical delivery conditions |
| 00/714924 DC : DRAFT OCT 2000 | PREN 10025-6 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| 11/30239488 DC : 0 | BS EN 10025-6 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN QUENCHED AND TEMPERED CONDITIONS |
| DIN EN 10025-4:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| 98/105109 DC : DRAFT JUNE 1998 | PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY |
| UNE-EN 1993-1-8:2013 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints |
| DIN EN 10048:1996-10 | HOT-ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
| I.S. EN 10169:2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| PREN 10120 : DRAFT 2014 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| PREN 10025-5 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PREN 10028-1 : DRAFT 2014 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 16/30319005 DC : 0 | BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS |
| EN 10025-6:2004+A1:2009 | Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
| BS EN 12285-1:2003 | Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
| DIN EN 12285-1:2016-10 (Draft) | WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| BS EN 10025-5:2004 | Hot rolled products of structual steels Technical delivery conditons for structural steels with improved atmospheric corrosion resistance |
| BS EN 10095 : 1999-07 | HEAT RESISTING STEELS AND NICKEL ALLOYS |
| BS EN 10304:2001 | Magnetic materials (iron and steel) for use in relays |
| BS EN 10113-1:1993 | Hot-rolled products in weldable fine grain structural steels General delivery conditions |
| BS EN 10025-2:2004 | Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels |
| BS EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions |
| BS EN 10025-3:2004 | Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| UNE-EN 10149-3:2014 | Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels |
| I.S. EN 10120:2017 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| DIN EN 10025-5:2005-02 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
| EN 12285-2:2005 | Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| EN 10079:2007 | Definition of steel products |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 10304:2001 | Magnetic materials (iron and steel) for use in relays |
| EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| EN 10162:2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
| EN 10149-2:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
| DIN EN 10025-4:2005-02 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| DIN EN 10025-6:2009-08 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 10207:2017 | Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| EN 12953-2:2012 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| PREN 10025-3 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| BS EN 14545:2008 | Timber structures. Connectors. Requirements |
| 11/30239494 DC : 0 | BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| 02/106055 DC : 0 | PREN 14545 - TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS |
| DIN EN 10025-6:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| 00/714922 DC : DRAFT OCT 2000 | PREN 10025-4 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| PREN 1317-5 : DRAFT 2013 | ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, TEST AND ASSESSMENT METHODS AND ACCEPTANCE CRITERIA |
| 15/30327671 DC : 0 | BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 08/30161340 DC : DRAFT FEB 2008 | BS EN 60404-8-10 - MAGNETIC MATERIALS - PART 8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SECTION 10: SPECIFICATIONS FOR MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS |
| 11/30239473 DC : 0 | BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| BS EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 10025-6:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| DIN EN 10025-2:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| DIN EN 10025-3:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| BS EN 10025-4:2004 | Hot rolled products of structural steels Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| PREN 10149-2 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 10025-6:2019 | Hot rolled products of structural steels Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
| UNE-EN 10088-4:2010 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 10163-2:2005-03 | Delivery requirements for surface conditions of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats; German version EN 10163-2:2004 |
| DIN EN 12285-2:2005-05 | WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| DIN EN 1993-1-8:2010-12 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009) |
| UNE-EN 10120:2018 | Steel sheet and strip for welded gas cylinders |
| DIN EN 10249-2:2006-05 (Draft) | Cold-formed steel sheet piling - Part 2: Tolerances on shape and dimensions; German version prEN 10249-2:2006 |
| BS EN 10162:2003 | Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances |
| BS EN 10155:1993 | Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions |
| UNE-EN 10149-2:2014 | Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
| BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
| I.S. EN 10143:2006 | CONTINUOUSLY HOT-DIP COATED STEEL SHEET AND STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
| I.S. EN 10149-3:2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED OR NORMALIZED ROLLED STEELS |
| I.S. EN 10163-2:2005 | DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 2: PLATE AND WIDE FLATS |
| I.S. EN 10152:2017 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10028-1:2017-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10149-2:2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| I.S. EN 40-2:2004 | LIGHTING COLUMNS - PART 2: GENERAL REQUIREMENTS AND DIMENSIONS |
| I.S. EN 12953-2:2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| DIN EN 10169-1:2004-04 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| I.S. EN 10149-1:2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN EN 40-2:2005-02 | Lighting columns - Part 2: General requirements and dimensions; German version EN 40-2:2004 |
| I.S. EN 10028-1:2017 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 10025-1:2005-02 | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004 |
| I.S. EN 10111:2008 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10079:2007 | DEFINITION OF STEEL PRODUCTS |
| UNI EN 10111 : 2008 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10149-1 : 2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 11/30239479 DC : 0 | BS EN 10025-3 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| DIN EN 10169:2012-06 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012) |
| I.S. EN 10169-1:2004 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| 16/30319008 DC : 0 | BS EN 12285-3 - WORKSHOP FABRICATED STEEL TANKS - PART 3: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS FOR HEATING AND COOLING OF BUILDINGS |
| ONORM EN ISO 4126-2 : 2006 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES |
| 17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
| UNE-EN 10338:2016 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| PREN 10025-4 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| 14/30312176 DC : 0 | BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| I.S. EN 10025-2:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| 11/30239482 DC : 0 | BS EN 10025-4 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| 08/30167676 DC : DRAFT JAN 2008 | BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| 05/30132920 DC : DRAFT APR 2005 | EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES |
| 14/30260020 DC : 0 | BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS |
| DIN EN 10149-3:2013-12 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED OR NORMALIZED ROLLED STEELS |
| 04/30117571 DC : DRAFT AUG 2004 | EN 10143 - CONTINUOUSLY HOT-DIP COATED STEEL SHEET AND STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
| 05/30126202 DC : 0 | EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| PREN 12285-1 : DRAFT 2016 | WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS |
| I.S. EN 16983:2016 | DISC SPRINGS - QUALITY SPECIFICATIONS - DIMENSIONS |
| I.S. EN 10025-3:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| IEC 60404-8-10:2009 | Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays |
| PREN 10025-2 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 12285-1:2003 | Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
| BS EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| UNI EN 10079 : 2007 | DEFINITION OF STEEL PRODUCTS |
| UNI EN 10149-3 : 2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED OR NORMALIZED ROLLED STEELS |
| UNI EN 10083-1 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10149-2 : 2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| UNI EN 1993-1-8 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
| UNI EN 12953-2 : 2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN 14010 : 2009 | SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES |
| DIN EN 10149-1:2013-12 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10143:2006-09 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape; German version EN 10143:2006 |
| 04/30125076 DC : 0 | EN 10111 - CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 14545 : 2009 | TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS |
| BS 1449-1.6(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR TOLERANCES ON DIMENSIONS AND SHAPE FOR HOT ROLLED WIDE MATERIAL |
| 98/705399 DC : DRAFT MAR 1998 | PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS |
| DIN EN 10152:2015-10 (Draft) | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10025-1:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| NF ENV 1090-1 : 96 FD | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| 02/713103 DC : DRAFT NOV 2002 | PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| BS 1449-1.1:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip General specification |
| DIN EN 10149-2:2013-12 | Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
| PREN 10025-6 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN QUENCHED AND TEMPERED CONDITIONS |
| I.S. EN 10025-4:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| I.S. EN 10338:2015 | HOT ROLLED AND COLD ROLLED NON-COATED PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10207:2017 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 10207:2017 | Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars |
| EN 10025-4:2004 | Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| I.S. ENV 1993-2:1997 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 2: STEEL BRIDGES |
| I.S. EN 14545:2008 | TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS |
| BS EN 10025-1:2004 | Hot rolled products of structural steels General technical delivery conditions |
| BS EN 10149-2:2013 | Hot rolled flat products made of high yield strength steels for cold forming Technical delivery conditions for thermomechanically rolled steels |
| BS EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections Plate and wide flats |
| UNE-EN 12953-2:2013 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN 10143:2006 | Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape |
| BS EN 10249-2:1996 | Cold formed sheet piling of non alloy steels Tolerances on shape and dimensions |
| BS EN 10079:2007 | Definition of steel products |
| UNE-EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| BS EN 10137-1:1996 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions General delivery conditions |
| BS EN 10048:1997 | Hot rolled narrow steel strip. Tolerances on dimensions and shape |
| BS EN 14010 : 2003 | |
| BS EN 40-2:2004 | Lighting columns General requirements and dimensions |
| BS EN 1993-1-8:2005 | Eurocode 3. Design of steel structures Design of joints |
| UNE-EN 10149-1:2014 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| UNE-EN 10169:2011 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| UNE-EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| BS EN 12953-2:2012 | Shell boilers Materials for pressure parts of boilers and accessories |
| BS EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions |
| ENV 1993-2 : 1997 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 2: STEEL BRIDGES |
| EN 40-2:2004 | Lighting columns - Part 2: General requirements and dimensions |
| EN 14545:2008 | Timber structures - Connectors - Requirements |
| BS EN 16983:2016 | Disc springs. Quality specifications. Dimensions |
| 96/106381 DC : DRAFT AUG 1996 | PREN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
| 06/30148772 DC : 0 | EN 10249-2 - COLD FORMED STEEL SHEET PILING - PART 2: TOLERANCES ON SHAPE AND DIMENSIONS |
| 07/30117697 DC : 0 | BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 00/714923 DC : DRAFT OCT 2000 | PREN 10025-5 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| 14/30312182 DC : 0 | BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 14545:2009-02 | TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS |
| UNI EN 10025-6 : 2009 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| DIN 83205:2002-08 | STAIRS AND GUARD RAILS FOR ENGINE ROOMS AND BOILER ROOMS IN SEAGOING SHIPS - GUARD RAILS |
| 08/30188146 DC : 0 | BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| 11/30239485 DC : 0 | BS EN 10025-5 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| 15/30331537 DC : 0 | BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| 13/30280398 DC : 0 | BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10169 : 2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10025-5:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| I.S. EN 10025-5:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| PREN 10025-1 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| BS EN 10025-6 : 2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| I.S. EN 10343:2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| ISO 630-1:2011 | Structural steels Part 1: General technical delivery conditions for hot-rolled products |
| EN 10025-5:2004 | Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
| UNI EN 10169 : 2012 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 12285-1:2003 | WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| UNI EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| PREN 10338 : DRAFT 2013 | HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 10149-1 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| I.S. EN 10088-4:2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| DIN EN 12953-2:2012-05 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories; German version EN 12953-2:2012 |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| BS EN 10149-3:2013 | Hot rolled flat products made of high yield strength steels for cold forming Technical delivery conditions for normalized or normalized rolled steels |
| BS EN 10028-1:2017 | Flat products made of steels for pressure purposes General requirements |
| BS EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods) |
| BS EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions |
| BS EN 12285-2:2005 | Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
| EN 10149-3:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels |
| DIN EN 10079:2007-06 | Definition of steel products |
| EN 10137-1 : 1995 | PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - GENERAL DELIVERY CONDITIONS |
| EN 10343:2009 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 10249-2:1995 | Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
| DIN EN 10249-2:1995-08 | Cold formed non-alloy steel sheet piling - Tolerances on shape and dimensions |
| DIN EN 10111:2008-06 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10162:2003-12 | Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003 |
| I.S. EN 10249-2:1996 | COLD FORMED SHEET PILING OF NON ALLOY STEELS - PART 2: TOLERANCES ON SHAPE AND DIMENSIONS |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 10020:2000 | Definition and classification of grades of steel |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.