ISO 14119:2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety of machinery — Interlocking devices associated with guards — Principles for design and selection
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
10-09-2024
Superseded by
Language(s)
French, English
Published date
25-09-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 14119:2013 specifies principles for the design and selection ? independent of the nature of the energy source ? of interlocking devices associated with guards.It covers the parts of guards which actuate interlocking devices. It does not necessarily provide all the specific requirements for trapped key systems.
ISO 14119:2013 provides measures to minimize defeat of interlocking devices in a reasonably foreseeable manner.
| Committee |
ISO/TC 199
|
| DevelopmentNote |
Supersedes ISO/DIS 14119. (09/2013)
|
| DocumentType |
Standard
|
| Pages |
71
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| AS/NZS 4024:2019 Series | Identical |
| SAC GB/T 18831:2017 | Identical |
| JIS B 9710:2019 | Identical |
| DIN EN ISO 14119:2014-03 | Identical |
| NF EN ISO 14119 : 2013 | Identical |
| NBN EN ISO 14119 : 2013 | Identical |
| NEN EN ISO 14119 : 2013 | Identical |
| NS EN ISO 14119 : 2013 | Identical |
| I.S. EN ISO 14119:2013 | Identical |
| PN EN ISO 14119 : 2014 | Identical |
| AS/NZS 4024.1602:2014 | Identical |
| SN EN ISO 14119:2013 | Identical |
| UNI EN ISO 14119 : 2013 | Identical |
| SS-EN ISO 14119:2013 | Identical |
| IS 16812 : 2018 | Identical |
| UNE-EN ISO 14119:2014 | Identical |
| BS EN ISO 14119:2013 | Identical |
| EN ISO 14119:2013 | Identical |
| BS EN ISO 13856-3:2013 | Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices |
| I.S. EN ISO 10218-1:2011 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 1: ROBOTS |
| CEI CLC/TS 62046 : 2011 | SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| 15/30299134 DC : 0 | BS EN ISO 5395-2:2013/A1 - GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS |
| I.S. EN ISO 19085-8:2018 | WOODWORKING MACHINES - SAFETY - PART 8: BELT SANDING AND CALIBRATING MACHINES FOR STRAIGHT WORKPIECES (ISO 19085-8:2017) |
| ISO 19085-8:2017 | Woodworking machines — Safety — Part 8: Belt sanding and calibrating machines for straight workpieces |
| BS EN ISO 10218-1:2011 | Robots and robotic devices. Safety requirements for industrial robots Robots |
| DIN EN ISO 13856-2:2013-08 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013) |
| 01/702212 DC : DRAFT JAN 2001 | ISO 11553 - SAFETY OF MACHINERY- LASER PROCESSING MACHINES - SAFETY REQUIREMENTS |
| BS ISO 12643-3:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Binding and finishing equipment and systems |
| 16/30337092 DC | BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements |
| 17/30358016 DC : 0 | BS EN ISO 13857 - SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
| ISO 7475:2002 | Mechanical vibration Balancing machines Enclosures and other protective measures for the measuring station |
| BS EN 15572:2015 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines |
| BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
| 06/30155798 DC : DRAFT SEP 2006 | BS EN 62046 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| UNE-EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| 10/30198892 DC : 0 | BS EN ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| I.S. EN ISO 16090-1:2018 | MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017) |
| DIN EN 16564:2015-04 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| 11/30231451 DC : DRAFT SEP 2011 | BS EN ISO 13856-1 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS |
| CEI EN 60947-5-3 : 2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| I.S. EN 16474:2015 | PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS |
| 03/118984 DC : 0 | ISO 15998 - EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS |
| BS ISO 12643-4:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Converting equipment and systems |
| BS EN 16474:2015 | Plastics and rubber machines. Tyre curing machines. Safety requirements |
| DIN EN 15180:2015-01 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| 11/30212367 DC : 0 | BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT |
| 10/30214890 DC : 0 | BS EN ISO 5395-3 - GARDEN EQUIPMENT - SAFETY OF POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS |
| 16/30318928 DC : 0 | BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES |
| DIN EN ISO 13855:2010-10 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| BS EN 15180:2014 | Food processing machinery. Food depositors. Safety and hygiene requirements |
| ISO 16092-1:2017 | Machine tools safety — Presses — Part 1: General safety requirements |
| DIN EN ISO 13482:2014-11 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
| ISO 16090-1:2017 | Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements |
| CSA Z460 : 2013 | CONTROL OF HAZARDOUS ENERGY - LOCKOUT AND OTHER METHODS |
| UNI EN 15165 : 2014 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. CLC TS 62046:2005 | SAFETY OF MACHINERY- APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| DIN EN 16486:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| I.S. EN 16486:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| PREN ISO 13856-2 : DRAFT 2011 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURESENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO/DIS 13856-2:2011) |
| I.S. EN 415-10:2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| I.S. EN ISO 18217:2015 | SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015) |
| I.S. EN 16564:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| I.S. EN ISO 16092-3:2018 | MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES (ISO 16092-3:2017) |
| I.S. EN 15571:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| I.S. EN 16500:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| I.S. EN 15180:2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 12100 : 2010 | SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION |
| BS ISO 13577-1:2016 | Industrial furnaces and associated processing equipment. Safety General requirements |
| ISO 5395-2:2013 | Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers |
| UNI EN 15180 : 2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| ISO/TS 22559-2:2010 | Safety requirements for lifts (elevators) Part 2: Safety parameters meeting the global essential safety requirements (GESRs) |
| EN 12331:2015 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| UNE-EN ISO 13856-1:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
| DIN EN ISO 5395-3:2014-03 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR (ISO 5395-3:2013 + AMD 1:2017, CORRECTED VERSION 2017-03) |
| I.S. EN ISO 14118:2018 | SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP (ISO 14118:2017) |
| NF EN ISO 19085-1 : 2017 | WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNE-EN 16500:2015 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
| 17/30364328 DC : 0 | BS EN 1009-5 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 5: SPECIFIC REQUIREMENTS FOR CLEANING, RECYCLING, SORTING AND MUD TREATMENT MACHINERY |
| UNE-EN ISO 19085-1:2018 | Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) |
| ISO 16089:2015 | Machine tools Safety Stationary grinding machines |
| EN ISO 16090-1:2018 | Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017) |
| EN 12013:2018 | Plastics and rubber machines - Internal mixers - Safety requirements |
| DIN EN 609-1:2010-07 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| DIN EN ISO 13849-2:2013-02 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012) |
| DIN EN 1870-3:2015-02 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| UNE-EN ISO 13849-2:2013 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| BS EN 454:2014 | Food processing machinery. Planetary mixers. Safety and hygiene requirements |
| 14/30278953 DC : 0 | BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| BS EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery Common requirements |
| I.S. EN 12463:2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13871:2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| EN 13870:2015 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| EN 12463:2014 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| I.S. EN 454:2014 | FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
| EN 60825-4:2006/A2:2011 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| ONORM EN 12463 : 2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 13020:2015 | Road surface treatment machines - Safety requirements |
| EN 12547:2014 | Centrifuges - Common safety requirements |
| EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| DIN EN ISO 12100-1:2004-04 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| EN 12043:2014 | Food processing machinery - Intermediate provers - Safety and hygiene requirements |
| EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| EN 12041:2014 | Food processing machinery - Moulders - Safety and hygiene requirements |
| EN 12268:2014 | Food processing machinery - Band saw machines - Safety and hygiene requirements |
| UNI EN 12463 : 2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 12100-2:2004-04 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| 15/30302620 DC : 0 | BS EN ISO 19085-4 - WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES |
| UNE-EN 60947-5-3:2014 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| 14/30296658 DC : 0 | BS IEC 62046 ED1.0 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| 15/30326831 DC : 0 | BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| I.S. EN ISO 11111-7:2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 7: DYEING AND FINISHING MACHINERY (ISO 11111-7:2005) |
| UNE-EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| 07/30163894 DC : 0 | BS EN 60825-4 AMD 1 - SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| UNI EN 16500 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| IEC 62046:2018 | Safety of machinery - Application of protective equipment to detect the presence of persons |
| 15/30299138 DC : 0 | BS EN ISO 5395-3:2013/A1 - GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR |
| 09/30201364 DC : 0 | BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| DIN EN ISO 13856-1:2013-08 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013) |
| 14/30274816 DC : 0 | BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| UNI EN ISO 13856-3 : 2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| 12/30257838 DC : 0 | BS EN 62046 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| PREN 1114-3 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| BS EN 16500:2014 | Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements |
| BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| ISO/TR 24119:2015 | Safety of machinery Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts |
| BS EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Common safety requirements |
| 07/30142135 DC : 0 | BS EN 1012-1 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| BS EN ISO 13855:2010 | Safety of machinery. Positioning of safeguards with respect to the approach speeds of parts of the human body |
| 16/30335973 DC : 0 | BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) |
| UNI EN ISO 10821 : 2010 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
| BS EN 60947-5-3:2013 | Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| 17/30336631 DC : 0 | BS EN 62246-1-1 - REED SWITCHES - PART 1-1: DETAIL SPECIFICATION - QUALITY ASSESSMENT |
| PREN 12012-1 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS |
| 04/30110212 DC : DRAFT MAR 2004 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
| BS EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
| RIA ISO 10218-1 : 2007 | ROBOTS FOR INDUSTRIAL ENVIRONMENT - SAFETY REQUIREMENTS - PART 1: ROBOT |
| BS EN 16743:2016 | Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements |
| BS EN 16486:2014 | Machines for compacting waste materials or recyclable fractions. Compactors. Safety requirements |
| DIN EN ISO 14120:2016-05 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS (ISO 14120:2015) |
| UNE-EN ISO 13856-2:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) |
| BS EN 1672-1:2014 | Food processing machinery. Basic concepts Safety requirements |
| ISO 12643-4:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems |
| ANSI/ISO 12100-1 : 2007 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| UNI EN 16486 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| ANSI B11.0 : 2015 | SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT |
| 16/30337802 DC : 0 | BS EN 1974 - FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1672-1:2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| I.S. EN 15163:2017 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS |
| UNI EN ISO 10218-2 : 2011 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION |
| DIN EN 15467:2015-03 | FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 12648:2006 | Graphic technology Safety requirements for printing press systems |
| PREN 1974 : DRAFT 2016 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 5395-2:2014-03 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS (ISO 5395-2:2013 + AMD 1:2016 + AMD 2:2017) |
| ISO 11111-4:2005 | Textile machinery Safety requirements Part 4: Yarn processing, cordage and rope manufacturing machinery |
| EN ISO 14118:2018 | Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017) |
| EN ISO 16092-3:2018 | Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) |
| UNI EN ISO 13856-1 : 2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS |
| I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| IEC TS 62046:2008 | Safety of machinery - Application of protective equipment to detect the presence of persons |
| DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| DIN EN 12268:2015-01 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1674:2015-12 | FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 12463:2015-02 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| DIN EN 12331:2015-12 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| DIN EN ISO 10472-4:2009-09 | Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) |
| DIN EN 1417:2015-03 | Plastics and rubber machines - Two roll mills - Safety requirements; German version EN 1417:2014 |
| DIN EN ISO 10472-3:2009-10 | Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
| DIN EN 12041:2015-02 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 11553-1:2009-03 | Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
| DIN EN 536:2016-01 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| BS EN ISO 11111-4 : 2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 11111-4:2005) |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| BS EN ISO 11111-1:2016 | Textile machinery. Safety requirements Common requirements |
| BS EN ISO 13849-2:2012 | Safety of machinery. Safety-related parts of control systems Validation |
| BS EN 12043:2014 | Food processing machinery. Intermediate provers. Safety and hygiene requirements |
| ISO 10472-4:1997 | Safety requirements for industrial laundry machinery Part 4: Air dryers |
| UNE-EN 13020:2016 | Road surface treatment machines - Safety requirements |
| UNE-EN 12547:2015 | Centrifuges - Common safety requirements |
| BS EN ISO 10472-3:2008 | Safety requirements for industrial laundry machinery Washing tunnel lines including component machines |
| UNE-EN 609-1:2017 | Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
| I.S. EN ISO 13849-2:2012 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012) |
| I.S. EN ISO 10472-6:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 6: IRONING AND FUSING PRESSES |
| I.S. EN 12331:2015 | FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ONORM EN 16564 : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| I.S. EN 1870-3:2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| I.S. EN ISO 10472-4:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS |
| I.S. EN 12043:2014 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 16564:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| I.S. EN 60825-4:2006 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| UNI EN ISO 11553-1 : 2009 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
| ONORM EN 15571 : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| I.S. EN 453:2014 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 10472-1:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| I.S. EN ISO 11111-1:2016 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016) |
| I.S. EN 12268:2014 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 609-1:2017 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| I.S. EN ISO 11553-2:2008 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
| I.S. EN 1674:2015 | FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
| I.S. EN 12041:2014 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 15571:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| I.S. EN 13870:2015 | FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 10821:2013-02 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009) |
| I.S. EN 1417:2014 | PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS |
| I.S. EN 12547:2014 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| I.S. EN 536:2015 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN ISO 10472-5:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 5: FLATWORK IRONERS, FEEDERS AND FOLDERS |
| I.S. EN ISO 10472-2:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 2: WASHING MACHINES AND WASHER-EXTRACTORS |
| DIN EN 609-1:2017-04 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| I.S. EN ISO 10472-3:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 3: WASHING TUNNEL LINES INCLUDING COMPONENT MACHINES |
| I.S. EN 13020:2015 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| ONORM EN 16486 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| DIN EN ISO 16093:2017-10 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| UNI EN ISO 10472-3 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 3: WASHING TUNNEL LINES INCLUDING COMPONENT MACHINES |
| UNI EN 453 : 2014 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| CSA Z432 : 2016 | SAFEGUARDING OF MACHINERY |
| PD ISO/TR 22100-3:2016 | Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards |
| DIN EN 15165:2015-01 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 05/30137424 DC : 0 | IEC 62246-2 - REED CONTACT UNITS - PART 2: HEAVY-DUTY REED SWITCHES |
| DIN EN 1672-1:2014-12 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| ISO/TR 14121-2:2012 | Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods |
| 14/30272245 DC : 0 | BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS |
| DIN EN ISO 18217:2015-12 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
| I.S. EN ISO 11111-2:2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 2: SPINNING PREPARATORY AND SPINNING MACHINES |
| PREN 13379 : DRAFT 2016 | PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| 15/30296744 DC : 0 | BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| I.S. EN ISO 16092-1:2018 | MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017) |
| DIN EN 15571:2015-03 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| DIN EN ISO 10218-1:2012-01 | Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011) |
| UNI EN ISO 10218-1 : 2012 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 1: ROBOTS |
| 14/30285733 DC : 0 | BS EN ISO 16092-1 - MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS |
| BIS IS/ISO 12643-4 : 2010 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 4: CONVERTING EQUIPMENT AND SYSTEMS |
| BS EN 15467:2014 | Food processing machinery. Fish heading and filleting machines. Safety and hygiene requirements |
| 16/30331346 DC : 0 | BS EN ISO 14118 - SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP |
| 10/30215731 DC : 0 | BS ISO 21940-23 - MECHANICAL VIBRATION - ROTOR BALANCING - PART 23: BALANCING MACHINES - ENCLOSURES AND OTHER PROTECTIVE MEASURES FOR THE MEASURING STATION |
| 17/30317170 DC : 0 | BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| 06/30157246 DC : 0 | BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT |
| DIN EN ISO 16093:2014-03 (Draft) | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
| UNI EN ISO 8230-1 : 2009 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| DD CLC/TS 62046:2008 | Safety of machinery. Application of protective equipment to detect the presence of persons |
| BS PD ISO/TR 22100-1 : 2015 | SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS |
| 14/30297793 DC : 0 | BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES |
| BS EN 15165:2014 | Food processing machinery. Forming machines. Safety and hygiene requirements |
| BS EN ISO 14120:2015 | Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards |
| 04/30096910 DC : DRAFT OCT 2004 | ISO 11553-2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND OPERATED LASER PROCESSING DEVICES |
| BS EN ISO 13856-2:2013 | Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars |
| UNE-EN ISO 13855:2011 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| DIN EN 16743:2016-05 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 16282-8:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installations for treatment of aerosol. Requirements and testing |
| 09/30197747 DC : 0 | BS ISO 10218-1 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS - PART 1: INDUSTRIAL ROBOT |
| DIN EN ISO 10218-2:2012-06 | Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
| UNE-EN 16564:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| UNE-EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
| BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
| 14/30263884 DC : 0 | BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| DIN EN 16474:2015-08 | PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
| 09/30193520 DC : 0 | BS EN 60947-5-3 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF) |
| DIN EN 415-10:2014-07 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| ISO 16092-3:2017 | Machine tools safety — Presses — Part 3: Safety requirements for hydraulic presses |
| ISO/TR 22100-3:2016 | Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards |
| S.R. CEN ISO/TR 22100-1:2017 | SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015) |
| I.S. EN ISO 14120:2015 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS (ISO 14120:2015) |
| I.S. EN 1570-2:2016 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| I.S. EN ISO 11111-4:2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 11111-4:2005) |
| I.S. EN 60947-5-3:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| I.S. EN 15572:2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| NF EN ISO 10218-2 : 2011 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEM AND INTEGRATION |
| I.S. EN 15467:2014 | FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 15165:2014 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 415-10 : 2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| UNE-EN ISO 10218-2:2011 | Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
| I.S. EN 16743:2016 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 16774:2016 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
| I.S. EN ISO 13856-2:2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013) |
| I.S. EN 16719:2018 | TRANSPORT PLATFORMS |
| ANSI/ASSP Z244.1:2016 | THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS |
| 16/30338566 DC : 2016-06 | BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 16093:2017 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
| BS EN ISO 16089:2015 | Machine tools. Safety. Stationary grinding machines |
| 17/30364338 DC : 0 | BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
| UNE-EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
| I.S. EN 12013:2018 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| I.S. EN ISO 13855:2010 | SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| EN IEC 62246-1-1:2018 | Reed switches - Part 1-1: Generic specification - Blank detail specification |
| PREN 609-1 : DRAFT 2014 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| BIS IS/ISO 12643-3 : 2010 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| ISO 17842-1:2015 | Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
| ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
| DIN EN ISO 10472-1:2009-10 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| DIN EN ISO 10472-2:2009-10 | Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) |
| DIN EN ISO 10472-6:2009-10 | Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997) |
| DIN EN 12547:2014-12 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| DIN EN 13020:2016-02 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| DIN EN 13870:2015-12 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| DIN EN 454:2015-02 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| DIN EN ISO 11553-2:2009-03 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
| DIN EN 12043:2015-02 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN ISO 12100-1 : 2003 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| BS EN 1417:2014 | Plastics and rubber machines. Two-roll mills. Safety requirements |
| ISO 10472-2:1997 | Safety requirements for industrial laundry machinery Part 2: Washing machines and washer-extractors |
| UNE-EN 12331:2016 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| IEC 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| BS EN ISO 11111-7 : 2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 7: DYEING AND FINISHING MACHINERY (ISO 11111-7:2005) |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| CEI EN 60519-1 : 2016 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| ONORM EN ISO 11553-1 : 2009 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
| EN 16486:2014 | Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements |
| EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| UNI EN ISO 12100-1 : 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| UNI EN ISO 10472-6 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 6: IRONING AND FUSING PRESSES |
| UNI EN ISO 12100-2 : 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| UNI EN 13871 : 2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 10472-2 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 2: WASHING MACHINES AND WASHER-EXTRACTORS |
| UNI EN 12547 : 2014 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| UNI EN ISO 11553-2 : 2009 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
| UNI EN 12043 : 2015 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 454 : 2015 | FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12041 : 2015 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 10472-1 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| UNI EN ISO 10472-4 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS |
| UNI EN 12268 : 2014 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 13849-2 : 2013 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| UNI EN ISO 10472-5 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 5: FLATWORK IRONERS, FEEDERS AND FOLDERS |
| UNE-EN 50223:2016 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| I.S. EN ISO 10218-2:2011 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION |
| DIN ISO 21940-23:2012-09 | Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines (ISO 21940-23:2012) |
| ISO/TR 20218-2:2017 | Robotics Safety design for industrial robot systems Part 2: Manual load/unload stations |
| BS EN 16564:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| 14/30293313 DC : 0 | BS EN ISO 19085-2 - WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES |
| PREN 1009-5 : DRAFT 2017 | MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 5: SPECIFIC REQUIREMENTS FOR CLEANING, RECYCLING, SORTING AND MUD TREATMENT MACHINERY |
| BS EN ISO 10218-2:2011 | Robots and robotic devices. Safety requirements for industrial robots Robot systems and integration |
| DIN EN ISO 13856-3:2013-12 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013) |
| I.S. EN 16282-8:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF AEROSOL - REQUIREMENTS AND TESTING |
| CLC/TS 62046:2008 | Safety of machinery - Application of protective equipment to detect the presence of persons |
| 12/30244783 DC : 0 | BS EN ISO 13856-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| UNI EN ISO 13856-2 : 2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS |
| PREN 12013 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| PREN ISO 13849-2 : DRAFT 2010 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| DIN EN 1570-2:2014-06 (Draft) | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| UNI ISO 15998 : 2008 | EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS FOR FUNCTIONAL SAFETY |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| DIN EN 15572:2015-12 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| 07/30166811 DC : 0 | BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
| 13/30263767 DC : 0 | BS EN ISO 14120 - SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
| PREN ISO 10218-1 : DRAFT 2009 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS - PART 1: INDUSTRIAL ROBOT |
| BS EN 1570-2:2016 | Safety requirements for lifting tables Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
| I.S. EN 1870-6:2017 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD |
| 14/30310338 DC : 0 | BS EN 609-1 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| 08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 15163:2018 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| 15/30300474 DC : DRAFT FEB 2015 | BS ISO 19085-5 - WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS |
| PD ISO/TR 24119:2015 | Safety of machinery. Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts |
| BS EN 415-10:2014 | Safety of packaging machines General Requirements |
| DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| UNE-EN 1570-2:2017 | Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
| BS EN ISO 16093:2017 | Machine tools. Safety. Sawing machines for cold metal |
| 14/30293310 DC : 0 | BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS |
| 09/30201664 DC : 0 | BS EN ISO 12100 - SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN, RISK ASSESSMENT AND RISK REDUCTION |
| UNE-EN ISO 13482:2014 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
| 14/30304361 DC : 0 | BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS |
| 10/30214886 DC : 0 | BS EN ISO 5395-2 - GARDEN EQUIPMENT - SAFETY OF POWERED LAWNMOWERS - PART 2: PEDESTRIAN CONTROLLED LAWNMOWERS |
| BS EN 1870-6:2017 | Safety of woodworking machines. Circular sawing machines Circular sawing machines for fire wood |
| 04/30122366 DC : DRAFT SEP 2004 | EN ISO 10218 - ROBOTS FOR INDUSTRIAL ENVIRONMENTS - SAFETY REQUIREMENTS |
| 14/30279065 DC : 0 | BS EN ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| 05/30137922 DC : DRAFT AUG 2005 | ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| UNI EN ISO 13855 : 2010 | SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| BS EN ISO 13482:2014 | Robots and robotic devices. Safety requirements for personal care robots |
| DIN EN 16500:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| 00/707575 DC : DRAFT APR 2000 | ISO/DIS 12100-1 - SAFETY OF MACHINERY - BASIC CONCEPTS AND GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY AND METHODOLOGY |
| BS EN ISO 23125:2015 | Machine tools. Safety. Turning machines |
| CSA Z434 : 2014 | INDUSTRIAL ROBOTS AND ROBOT SYSTEMS |
| BS EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws |
| ISO 13577-1:2016 | Industrial furnaces and associated processing equipment Safety Part 1: General requirements |
| DIN EN 16500 E : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| DIN EN ISO 8230-1:2009-05 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| BS EN 16774:2016 | Safety of machinery. Safety requirements for steel converter and associated equipment |
| BS EN ISO 19085-1:2017 | Woodworking machines. Safety Common requirements |
| ISO 12649:2004 | Graphic technology Safety requirements for binding and finishing systems and equipment |
| UNE-EN 1672-1:2015 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| I.S. EN ISO 5395-2:2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS (ISO 5395-2:2013) |
| S.R. CLC/TS 62046:2008 | SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| I.S. EN IEC 62246-1-1:2018 | REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - BLANK DETAIL SPECIFICATION |
| I.S. EN ISO 13856-3:2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013) |
| PREN 13378 : DRAFT 2016 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| CEN ISO/TR 22100-1:2017 | Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015) |
| S.R. CWA 16688:2013 | BATTERY SWAP SYSTEMS INTERFACES FOR ELECTRIC VEHICLES |
| I.S. EN ISO 13482:2014 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
| I.S. EN ISO 8230-1:2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| I.S. EN ISO 5395-3:2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR (ISO 5395-3:2013) |
| I.S. EN ISO 16089:2015 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014) |
| ISO/TS 19837:2018 | Safety of machinery — Trapped key interlocking devices — Principles for design and selection |
| BS EN 12013:2018 | Plastics and rubber machines. Internal mixers. Safety requirements |
| PD CEN ISO/TR 22100-1:2017 | Safety of machinery. Relationship with ISO 12100 How ISO 12100 relates to type-B and type-C standards |
| EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| UNE-EN ISO 12100:2012 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| ISO 14118:2017 | Safety of machinery — Prevention of unexpected start-up |
| ISO/TR 22100-1:2015 | Safety of machinery Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standards |
| ISO 21940-23:2012 | Mechanical vibration — Rotor balancing — Part 23: Enclosures and other protective measures for the measuring station of balancing machines |
| ISO 12643-3:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems |
| IEC TS 60204-34:2016 | Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools |
| ISO 15998:2008 | Earth-moving machinery Machine-control systems (MCS) using electronic components Performance criteria and tests for functional safety |
| BS EN 12547:2014 | Centrifuges. Common safety requirements |
| ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Part 1: Common safety requirements |
| IEC 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| BS EN ISO 10821 : 2005 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
| ISO 11111-2:2005 | Textile machinery Safety requirements Part 2: Spinning preparatory and spinning machines |
| 13/30277685 DC : 0 | BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| BS EN 453:2014 | Food processing machinery. Dough mixers. Safety and hygiene requirements |
| ISO 10821:2005 | Industrial sewing machines Safety requirements for sewing machines, units and systems |
| EN ISO 11553-1:2008 | Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
| I.S. EN ISO 11553-1:2008 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
| BS ISO 17842-1:2015 | Safety of amusement rides and amusement devices Design and manufacture |
| BS EN 13871:2014 | Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements |
| BS EN 12268:2014 | Food processing machinery. Band saw machines. Safety and hygiene requirements |
| ISO 8230:1997 | Safety requirements for dry-cleaning machines using perchloroethylene |
| BS EN ISO 10472-2:2008 | Safety requirements for industrial laundry machinery Washing machines and washer-extractors |
| BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
| BS EN 1674:2015 | Food processing machinery. Dough sheeters. Safety and hygiene requirements |
| ISO 13482:2014 | Robots and robotic devices Safety requirements for personal care robots |
| IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV | Safety of laser products - Part 4: Laser guards |
| ISO 10218-1:2011 | Robots and robotic devices Safety requirements for industrial robots Part 1: Robots |
| ISO 10472-6:1997 | Safety requirements for industrial laundry machinery Part 6: Ironing and fusing presses |
| ISO 10218-2:2011 | Robots and robotic devices Safety requirements for industrial robots Part 2: Robot systems and integration |
| ISO 13856-3:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices |
| BS EN 1870-3:2014 | Safety of woodworking machines. Circular sawing machines Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| BS EN 12041:2014 | Food processing machinery. Moulders. Safety and hygiene requirements |
| UNE-EN 454:2015 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| ISO 23125:2015 | Machine tools — Safety — Turning machines |
| UNE-EN ISO 11111-4:2005 | Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) |
| ISO 13856-1:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
| BS EN 12331:2015 | Food processing machinery. Mincing machines. Safety and hygiene requirements |
| ISO 11111-1:2016 | Textile machinery Safety requirements Part 1: Common requirements |
| ISO 18217:2015 | Safety of woodworking machines Edge-banding machines fed by chain(s) |
| ISO 16093:2017 | Machine tools — Safety — Sawing machines for cold metal |
| ISO 13856-2:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars |
| 11/30232911 DC : 0 | BS ISO 13577-1 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 11553-2:2008 | Safety of machinery. Laser processing machines Safety requirements for hand-held laser processing devices |
| BS EN 13870:2015 | Food processing machinery. Portion cutting machines. Safety and hygiene requirements |
| UNE-EN ISO 11111-2:2005 | Textile machinery- Safety requirements- Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) |
| BS EN 536:2015 | Road construction machines. Mixing plants for road construction materials. Safety requirements |
| UNE-EN 13871:2015 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| ISO 11111-7:2005 | Textile machinery Safety requirements Part 7: Dyeing and finishing machinery |
| BS EN ISO 10472-6:2008 | Safety requirements for industrial laundry machinery Ironing and fusing presses |
| UNE-EN 13870:2016 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| UNE-EN ISO 11111-1:2016 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
| EN 1417:2014 | Plastics and rubber machines - Two-roll mills - Safety requirements |
| EN 16774:2016 | Safety of machinery - Safety requirements for steel converter and associated equipment |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN 15467:2014 | Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements |
| EN 536:2015 | Road construction machines - Mixing plants for road construction materials - Safety requirements |
| EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements |
| EN ISO 13856-1:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
| EN ISO 11111-1:2016 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
| EN ISO 10218-1:2011 | Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011) |
| EN ISO 13856-2:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) |
| EN ISO 10472-4:2008 | Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) |
| EN 1672-1:2014 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| EN 609-1:2017 | Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
| EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| EN 453:2014 | Food processing machinery - Dough mixers - Safety and hygiene requirements |
| EN 454:2014 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| EN ISO 10472-6:2008 | Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997) |
| EN ISO 13482:2014 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
| EN ISO 10472-2:2008 | Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) |
| EN 1870-6:2017 | Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood |
| EN 16500:2014 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
| EN ISO 13849-2:2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| EN 1870-3:2014 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| EN ISO 11553-2:2008 | Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) |
| EN ISO 8230 : 1997 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| EN 15165:2014 | Food processing machinery - Forming machines - Safety and hygiene requirements |
| EN 13871:2014 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| EN ISO 10472-3:2008 | Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
| ONORM EN 13870 : 2015 | FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
| EN ISO 16089:2015 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
| EN ISO 13855:2010 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| EN 1674:2015 | Food processing machinery - Dough sheeters - Safety and hygiene requirements |
| EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| EN 15572:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines |
| EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
| EN ISO 14120:2015 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015) |
| EN ISO 10218-2:2011 | Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
| EN 15180:2014 | Food processing machinery - Food depositors - Safety and hygiene requirements |
| EN ISO 13856-3:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) |
| EN 16282-8:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing |
| EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
| BS EN 15571:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines |
| UNI EN ISO 13482 : 2014 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS |
| I.S. EN ISO 12100-2:2003 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| UNI ISO 21940-23 : 2012 | MECHANICAL VIBRATION - ROTOR BALANCING - PART 23: ENCLOSURES AND OTHER PROTECTIVE MEASURES FOR THE MEASURING STATION OF BALANCING MACHINES |
| I.S. EN ISO 12100-1:2003 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| 14/30304364 DC : 0 | BS EN ISO 11111-2:2005/AMD 2 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 2: SPINNING PREPARATORY AND SPINNING MACHINES |
| 16/30318924 DC : 0 | BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES') |
| BS ISO 21940-23:2012 | Mechanical vibration. Rotor balancing Enclosures and other protective measures for the measuring station of balancing machines |
| I.S. EN ISO 8230:1998 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| 14/30279071 DC : 0 | BS EN ISO 12643-4 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 4: CONVERTING EQUIPMENT AND SYSTEMS |
| BS EN ISO 18217:2015 | Safety of woodworking machines. Edge-banding machines fed by chain(s) |
| 16/30341470 DC : 0 | BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS) |
| BS EN ISO 12100:2010 | Safety of machinery. General principles for design. Risk assessment and risk reduction |
| BS ISO 7475:2002 | Mechanical vibration. Balancing machines. Enclosures and other protective measures for the measuring station |
| PREN 13289 : DRAFT 2015 | PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| 08/30190508 DC : 0 | BS ISO 12643-4 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 4: CONVERTING EQUIPMENT AND SYSTEMS |
| 14/30276846 DC : 0 | BS EN ISO 18217 - SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED CHAIN(S) |
| 14/30302355 DC : 0 | BS EN ISO 11553-1 ED.2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
| 11/30239643 DC : 0 | BS EN ISO 13856-2 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS |
| 03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
| 15/30329716 DC | BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements |
| UNE-EN 15571:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| 16/30331355 DC : 0 | BS EN ISO 19085-8 - WOODWORKING MACHINES - SAFETY - PART 8: WIDE BELT CALIBRATING AND SANDING MACHINES |
| BIS IS/ISO 12643-1 : 2009 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN ISO 14120:2016 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015) |
| 17/30356573 DC : 0 | BS IEC 62046 ED1.0 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| ANSI/ISO 12100 : 2012 | SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION |
| BS EN ISO 13856-1:2013 | Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
| BS ISO 12649:2004 | Graphic technology. Safety requirements for binding and finishing systems and equipment |
| BS EN ISO 5395-2 : 2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS |
| EN ISO 19085-8:2018 | Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017) |
| UNE-EN ISO 18217:2016 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
| UNE-EN ISO 13856-3:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) |
| ANSI/ASSE Z244.1 : 2016 | THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS |
| DIN ISO 7475:2004-04 | MECHANICAL VIBRATION - BALANCING MACHINES - ENCLOSURES AND OTHER PROTECTIVE MEASURES FOR THE MEASURING STATION |
| UNI ISO/TR 14121-2 : 2013 | SAFETY OF MACHINERY - RISK ASSESSMENT - PART 2: PRACTICAL GUIDANCE AND EXAMPLES OF METHODS |
| I.S. EN ISO 13856-1:2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013) |
| I.S. EN ISO 19085-1:2017 | WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017) |
| ISO 19085-1:2017 | Woodworking machines Safety Part 1: Common requirements |
| BS EN ISO 5395-3 : 2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR (ISO 5395-3:2013) |
| ISO 5395-3:2013 | Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator |
| DIN EN ISO 16089:2016-06 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015) |
| EN ISO 18217:2015 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
| EN 16719:2018 | Transport platforms |
| UNI EN 1672-1 : 2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 15/30314036 DC : 0 | BS EN 12012-1 - PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS |
| ANSI/ISO 12100-2 : 2007 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| I.S. EN ISO 23125:2015 | MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015) |
| IEC 62840-2:2016 | Electric vehicle battery swap system - Part 2: Safety requirements |
| I.S. EN ISO 12100:2010 | SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION |
| I.S. EN 50223:2015 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 60519-1:2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| DIN EN 453:2015-04 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13871:2015-01 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN ISO 10472-4:2008 | Safety requirements for industrial laundry machinery Air dryers |
| BS EN 13020:2015 | Road surface treatment machines. Safety requirements |
| ISO 10472-3:1997 | Safety requirements for industrial laundry machinery Part 3: Washing tunnel lines including component machines |
| UNE-EN 1674:2015 | Food processing machinery - Dough sheeters - Safety and hygiene requirements |
| UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| BS EN 609-1:2017 | Agricultural and forestry machinery. Safety of log splitters Wedge splitters |
| DD ISO/TS 22559-2:2010 | Safety requirements for lifts (elevators) Safety parameters meeting the global essential safety requirements (GESRs) |
| BS EN 60825-4 : 2006 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| BS EN ISO 11553-1:2008 | Safety of machinery. Laser processing machines General safety requirements |
| BS EN ISO 11111-2 : 2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 2: SPINNING PREPARATORY AND SPINNING MACHINES (ISO 11111-2:2005) |
| BS EN 12463:2014 | Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements |
| ISO 13855:2010 | Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| ONORM EN 12331 : 2015 | FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1570-2:2017-03 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| UNE-EN ISO 10218-1:2012 | Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011) |
| ONORM EN 1417 : 2015 | PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS |
| CEI EN IEC 62061:2023 | Safety of machinery - Functional safety of safety-related control systems |
| NS-EN ISO 12643-5:2023 | Graphic technology - Safety requirements for graphic technology equipment and systems - Part 5: Manually-fed stand-alone platen presses (ISO 12643-5:2023) |
| NS-EN ISO 12643-2:2023 | Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems (ISO 12643-2:2023) |
| ISO 13855:2010 | Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body |
| AS 2210.3:2019 | Personal protective equipment Safety footwear (ISO 20345:2011, MOD) |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| EN 13906-1:2013 | Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| ISO/TR 23849:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
| IEC TR 62061-1:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| AS/NZS 4024.1603:2019 | Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up |
| DIN 33411-5:1999-11 | Physical strength of man - Part 5: Maximal isometric action forces, values |
| AS 2210.5:2019 | Personal protective equipment Occupational footwear (ISO 20347:2012, MOD) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO/TR 24119:2015 | Safety of machinery Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts |
| IEC 60947-5-2:2007+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.