![header thumbnail](/images/publishers\iec_cover.gif)
IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\iec_cover.gif)
Plugs and socket-outlets for household and similar purposes - Part1: General requirements
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
04-08-2022
English - French
14-02-2013
FOREWORD
INTRODUCTION to Amendment 2
1 Scope
2 Normative references
3 Definitions
4 General requirements
5 General remarks on tests
6 Ratings
7 Classification
8 Marking
9 Checking of dimensions
10 Protection against electric shock
11 Provision for earthing
12 Terminals and terminations
13 Construction of fixed socket-outlets
14 Construction of plugs and socket-outlets
15 Interlocked socket-outlets
16 Resistance to ageing, protection provided by enclosures,
and resistance to humidity
17 Insulation resistance and electric strength
18 Operation of earthing contacts
19 Temperature rise
20 Breaking capacity
21 Normal operation
22 Force necessary to withdraw the plug
23 Flexible cables and their connection
24 Mechanical strength
25 Resistance to heat
26 Screws, current-carrying parts and connections
27 Creepage distances, clearances and distances through
sealing compound
28 Resistance of insulating material to abnormal heat, to
fire and to tracking
29 Resistance to rusting
30 Additional tests on pins provided with insulating sleeves
Annex A (normative) - Safety-related routine tests for
factory-wired portable accessories (protection
against electric shock and correct polarity)
Annex B (normative) - Survey of specimens needed for tests
Annex C (informative) - Alternative gripping tests
Annex D (normative) - Switches incorporated in portable
socket-outlets
Annex E (informative) - Changes planned for the future in order
to align IEC 60884-1 with the requirements of IEC 60228,
IEC 60998 and IEC 60999
Bibliography
IEC 60884-1:2002+A1:2006+A2:2013 applies to plugs and fixed or portable socket-outlets for a.c. only, with or without earthing contact, with a rated voltage greater than 50 V but not exceeding 440 V and a rated current not exceeding 32 A, intended for household and similar purposes, either indoors or outdoors. This consolidated version consists of the third edition (2002), its amendment 1 (2006) and its amendment 2 (2013). Therefore, no need to order amendments in addition to this publication.
Committee |
TC 23/SC 23B
|
DevelopmentNote |
Stability Date: 2017. (10/2012)
|
DocumentType |
Standard
|
Pages |
327
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
GOST IEC 60884-1 : 2013 | Identical |
NBN C 61 066 : 1992 | Identical |
PN IEC 60884-1 : 2006 AC 1 2016 | Identical |
AS/NZS 60884.1:2013 | Identical |
CEI 23-50 : 2007 | Identical |
CEI 23-50 V1 : 2008 | Identical |
03/320323 DC : DRAFT DEC 2003 | |
I.S. EN 60352-7:2002 | SOLDERLESS CONNECTIONS - PART 7: SPRING CLAMP CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
UTEC 73 999 : 97 AMD 2 2001 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR THIN FLEXIBLE HEATING FILMS INCORPORATED INTO THE BUILDING AND FOR RADIANT MODULES |
16/30336300 DC : 0 | BS EN 60799 - ELECTRICAL ACESSORIES - CORD SETS AND INTERCONNECTION CORD SETS |
S.R. HD 60364-7-705:2007 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES |
96/211497 DC : DRAFT SEP 1996 | IEC 61534-1 - POWER TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
BS EN 60598-2-12:2013 | Luminaires Particular requirements. Mains socket-outlet mounted nightlights |
11/30233201 DC : 0 | BS EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
13/30267662 DC : 0 | BS EN ISO 17409 - ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS |
09/30203506 DC : 0 | BS EN 61534-1 - POWER TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
CEI EN 61534-1 : 2012 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
03/313638 DC : DRAFT SEP 2003 | IEC 60335-2-106 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-106: PARTICULAR REQUIREMENTS FOR UNDER CARPET HEATING SYSTEMS FOR ROOM HEATING |
PD ISO/TR 13062:2015 | Electric mopeds and motorcycles. Terminology and classification |
BS EN 60335-2-106:2007 | Household and similar electrical appliances. Safety Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings |
03/314480 DC : DRAFT SEP 2003 | EN 50065-4-7 - SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND FROM 1,6 MHZ TO 30 MHZ - PART 4-7: SAFETY OF PORTABLE FILTERS |
UNE-EN 61534-1:2011 | Powertrack systems -- Part 1: General requirements |
CEI 23-124 : 2012 | PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-7: PARTICULAR REQUIREMENTS FOR CORD EXTENSION SETS |
IEC 60884-2-5:2017 | Plugs and socket-outlets for household and similar purposes - Part 2-5: Particular requirements for adaptors |
CENELEC GUIDE 28 : 2006 | ACCESSIBILITY IN INTERFACES IN LOW VOLTAGE ELECTRICAL INSTALLATIONS - A GUIDE FOR STANDARD WRITERS |
CSA C22.2 No. 60601.1.1 : 2002 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
IEC 61009-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules |
BS EN 61242 : 1998 | ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
I.S. EN 61851-1:2011 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
UNE-EN 62752:2017 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
I.S. HD 60364-7-705:2007 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES (IEC 60364-7-705:2006 (MOD)) |
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
BS 3535-1:1990 | Isolating transformers and safety isolating transformers General requirements |
BS EN 61558-1 : 2005 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
IEC 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
BS IEC 62852 : 2014 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
14/30287195 DC : 0 | BS ISO 18246 - ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY |
08/30168069 DC : DRAFT MAR 2008 | BS EN 60364-7-717 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS |
EN 60598-2-12:2013 | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights |
EN 61558-1:2005/A1:2009 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
HD 60364-5-51:2009/A12:2017 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES |
HD 60364-7-717:2010/AC:2014 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS |
EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
EN 60799:1998 | Electrical accessories - Cord sets and interconnection cord sets |
EN 62606:2013/A1:2017 | GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES (IEC 62606:2013/A1:2017) |
EN 60684-3-136:1998 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose |
DIN EN 793 : 1998 | PARTICULAR REQUIREMENTS FOR SAFETY OF MEDICAL SUPPLY UNITS |
EN 60335-2-106:2007 | Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings |
BS EN 62282-5-1:2012 | Fuel cell technologies Portable fuel cell power systems. Safety |
13/30253221 DC : 0 | BS EN 62752 - IN-CABLE CONTROL AND PROTECTIVE DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
BS EN 61534-1 : 2011 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
BS EN 60799:1998 | Electrical accessories. Cord sets and interconnection cord sets |
15/30304603 DC : 0 | BS EN 50066 - MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
CSA C22.2 No. 60601.1.1 : 2002 : R2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
12/30248611 DC : 0 | BS EN 62606 - GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES (AFDD) |
CEI EN 60335-2-106 : 2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-106: PARTICULAR REQUIREMENTS FOR HEATED CARPETS AND FOR HEATING UNITS FOR ROOM HEATING INSTALLED UNDER REMOVABLE FLOOR COVERINGS |
PREN 61008-1 : DRAFT 2011 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
IEC 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
DIN EN ISO 17409:2016-09 (Draft) | ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS (ISO 17409:2015, CORRECTED VERSION 2015-12-15) |
95/206959 DC : 0 | IEC 61540 - PORTABLE RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USE (PRCD'S) |
I.S. EN 62852:2015 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
UNE-HD 60364-7-722:2016 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
BS EN 50065-4-7:2005 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Portable low voltage decoupling filters. Safety requirements |
PD IEC/TR 62296:2009 | Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements |
PREN 61009-1 : DRAFT 2011 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
CSA Z305.8 : 2003 | MEDICAL SUPPLY UNITS |
NF EN 61558-1 : 2006 AMD 1 2009 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
IEC 61242:1995 | Electrical accessories - Cable reels for household and similar purposes |
EN 61242:1997/A13:2017 | ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
NF EN 60601-1-1 : 2001 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
I.S. EN ISO 17409:2017 | ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS (ISO 17409:2015, CORRECTED VERSION 2015-12-15) |
CEI EN 50066 : 1997 | MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
VDE 0626 : 1999 | ELECTRICAL ACCESSORIES - CORD SETS AND INTERCONNECTION CORD SETS |
BS EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles General requirements |
CEI EN 60799 : 1999 | ELECTRICAL ACCESSORIES CORD SETS AND INTERCONNECTION CORD SETS |
IEC 60906-2:2011 | IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. and 20 A 125 V a.c. |
IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
CSA C22.2 No. 601.1.1 : 2000 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY - 1: COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
CEI EN 62196-1 : 2015 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
I.S. EN 60204-32:2008 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
IEC 60364-7-705:2006 | Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises |
IEC TR 62296:2009 | Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements |
ANSI/AAMI/IEC TIR62354:2015 | GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT |
I.S. EN 60335-2-96:2002 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-96: PARTICULAR REQUIREMENTS FOR FLEXIBLE SHEET HEATING ELEMENTS FOR ROOM HEATING |
AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
BS EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles. Safety requirements for conductive connection to an external electric power supply |
UNE-EN 62196-1:2015 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
06/30154990 DC : 0 | BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
UNE-EN 61851-1:2012 | Electric vehicle conductive charging system - Part 1: General requirements |
EN 60352-7:2002 | Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance |
BS 3535-1(1996) : 1996 | ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS |
VDE 0625-10 : 1994 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
DIN VDE 0620-101 : 1992 | PLUGS AND SOCKET-OUTLETS UP TO 400 V 25 A; FLAT NON-WIRABLE TWO POLE PLUGS, 2,5 A 250 V, WITH CORD, FOR THE CONNECTION OF CLASS-2-EQUIPMENT FOR HOUSEHOLD AND SIMILAR PURPOSES |
VDE 0620-101 : 1992 | PLUGS AND SOCKET-OUTLETS UP TO 400 V 25 A; FLAT NON-WIRABLE TWO POLE PLUGS, 2.5 A 250 V, WITH CORD, FOR THE CONNECTION OF CLASS-2-EQUIPMENT FOR HOUSEHOLD AND SIMILAR PURPOSES |
DIN EN 50066 : 1994 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
DIN EN 60799 : 1999 | ELECTRICAL ACCESSORIES - CORD SETS AND INTERCONNECTION CORD SETS |
TS 103 247 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); SINGLEMODE OPTICAL FIBRE SYSTEM SPECIFICATIONS FOR HOME CABLING |
NF EN 61242 : 1997 AMD 13 2018 | ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
I.S. EN 61009-1:2012 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
BS EN 60335-2-96 : 2002 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-96: PARTICULAR REQUIREMENTS FOR FLEXIBLE SHEET HEATING ELEMENTS FOR ROOM HEATING |
UNE-EN 61008-1:2013 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules |
03/312451 DC : DRAFT JULY 2003 | |
04/30123989 DC : DRAFT OCT 2004 | IEC 61643-11 - SURGE PROTECTION DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - PART 11: PERFORMANCE REQUIREMENTS AND TESTING METHODS |
I.S. EN ISO 18246:2017 | ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY (ISO 18246:2015) |
03/307803 DC : DRAFT MAY 2003 | EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES |
09/30210369 DC : DRAFT SEP 2009 | IEC 61643-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING METHODS |
13/30277668 DC : 0 | BS EN 62196-1 ED 3.0 - PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
BS EN 60742:1996 | Isolating transformers and safety isolating transformers. Requirements |
BS EN 60601-1-1:2001 | Medical electrical equipment. General requirements for safety Collateral standard. Safety requirements for medical electrical systems |
BS EN 60352-7:2002 | Solderless connections Spring clamp connections. General requirements, test methods and practical guidance |
BIS IS 12640-2 : 2008 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKING FOR HOUSEHOLD AND SIMILAR USES - PART 2: CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION (RCBOS) |
HD 60364-7-705:2007/A12:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES |
CAN/CSA-Z305.8-03 (R2018) | Medical Supply Units |
EN 61534-1:2011/A1:2014 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS (IEC 61534-1:2011/A1:2014) |
IEC 60364-7-717:2009 | Low-voltage electrical installations - Part 7-717: Requirements for special installations or locations - Mobile or transportable units |
IEC 60364-5-51:2005 | Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules |
I.S. EN 61643-11:2012 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS |
I.S. EN 62752:2016/AC:2019-03 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
I.S. EN 50066:1993 | MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES SAFETY REQUIREMENTS FOR RADIO TRANSMITTING EQUIPMENT |
AAMI/IEC TIR62296:2009 | |
I.S. EN 50065-4-7:2005 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND 1,6 MHZ TO 30 MHZ - PART 4-7: PORTABLE LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS |
I.S. EN 60601-1-1:2001 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
PREN 50630 : DRAFT 2014 | BS EN 50630 - TIME-DELAYED RESIDUAL CURRENT OPERATED CIRCUIT BREAKERS TYPE M WITHOUT OVER-CURRENT PROTECTION OR APPLICATION IN CIRCUITS WITH RATED CURRENTS GREATER ABOVE 32 A |
IEC 62335:2008 | Circuit breakers - Switched protective earth portable residual current devices for class I and battery powered vehicle applications |
IEC TR 62354:2014 | General testing procedures for medical electrical equipment |
PD IEC/TR 60601-4-3:2015 | Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements |
HD 62640:2015/A11:2016 | RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES (IEC 62640:2011, MODIFIED) |
NF EN 61534-1 : 2011 AMD 1 2014 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
IEC 61540:1997+AMD1:1998 CSV | Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) |
S.R. HD 60364-7-722:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLIES FOR ELECTRIC VEHICLES |
IEC TS 63066:2017 | Low-voltage docking connectors for removable energy storage units |
IEC 61643-1:2005 | Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems - Requirements and tests |
IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules |
IEC 60884-2-7:2011+AMD1:2013 CSV | Plugs and socket-outlets for household and similar purposes - Part2-7: Particular requirements for cord extension sets |
UNE-EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015) |
EN 61009-1:2012/A12:2016 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
IEC 62282-5-1:2012 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
UNE-EN 50521:2010 | Connectors for photovoltaic systems - Safety requirements and tests |
UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
IEC 60799:2018 RLV | Electrical accessories - Cord sets and interconnection cord sets |
UNE-EN ISO 17409:2017 | Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements (ISO 17409:2015, Corrected version 2015-12-15) |
DIN EN ISO 17409 E : 2017 | ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS (ISO 17409:2015, CORRECTED VERSION 2015-12-15) |
BS EN 50075:1991 | Specification for flat non-wirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes |
11/30233197 DC : 0 | BS EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
CEI EN 50065-4-7 : 2007 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND FROM 1,6 MHZ TO 30 MHZ - PART 4-7: PORTABLE LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS |
10/30234538 DC : 0 | BS EN 60598-2-12 - LUMINAIRES - PART 2-12: PARTICULAR REQUIREMENTS - MAINS SOCKET-OUTLET MOUNTED NIGHTLIGHTS |
CEI EN 62606 : 2014 | GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES |
CEI EN 60598-2-12 : 2014 | LUMINAIRES - PART 2-12: PARTICULAR REQUIREMENTS - MAINS SOCKET-OUTLET MOUNTED NIGHTLIGHTS |
BS EN ISO 17409:2017 | Electrically propelled road vehicles. Connection to an external electric power supply. Safety requirements |
UNE-EN 60598-2-12:2013 | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights |
CSA Z305.8 : 2003 : R2013 | MEDICAL SUPPLY UNITS |
I.S. EN 50521:2008 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
CSA C22.2 No. 60065 : 2016 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
IEC 61643-11:2011 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
CEI EN 60601-1-1 : 2003 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
CEI EN 61643-11 : 2014 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
I.S. EN 61534-1:2011 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
I.S. HD 60364-5-51:2009 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES (IEC 60364-5-51:2005 (MOD)) |
HD 60364-7-722:2016 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
I.S. EN 60598-2-12:2013 | LUMINAIRES - PART 2-12: PARTICULAR REQUIREMENTS - MAINS SOCKET-OUTLET MOUNTED NIGHTLIGHTS (IEC 60598-2-12:2013 (EQV)) |
IEC 62955:2018 | Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles |
I.S. EN 61558-1:2006 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
IEC 60799:2018 | Electrical accessories - Cord sets and interconnection cord sets |
IEC 61558-1 REDLINE : 3ED 2017 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 1: GENERAL REQUIREMENTS AND TESTS |
IEC 62640:2011+AMD1:2015 CSV | Residual current devices with or without overcurrent protection forsocket-outlets for household and similar uses |
95/204309 DC : DRAFT APRIL 1995 | RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION INCORPORATED IN OR ASSOCIATED WITH FIXED SOCKET-OUTLETS (SRCDS) |
BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
IEC 61534-1:2011+AMD1:2014 CSV | Powertrack systems - Part 1: General requirements |
BS ISO 18246 : 2015 | ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY |
BS EN 61851-1:2011 | Electric vehicle conductive charging system General requirements |
EN 62852:2015 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
EN 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
UNE-EN 61009-1:2013 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules |
05/30128512 DC : DRAFT JAN 2005 | IEC 61984 ED.2 - CONNECTORS - SAFETY REQUIREMENTS AND TESTS |
00/565497 DC : DRAFT DEC 2000 | BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE |
IEC 60601-1-1:2000 | Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems |
UNE-EN 62282-5-1:2013 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
IEC 60335-2-96:2002+AMD1:2003+AMD2:2008 CSV | Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating |
IEC 60598-2-12:2013 | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights |
IEC 60335-2-106:2007 | Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings |
15/30328159 DC : 0 | BS EN 61558-1 - SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
ISO 18246:2015 | Electrically propelled mopeds and motorcycles — Safety requirements for conductive connection to an external electric power supply |
BS EN 62852:2015 | Connectors for DC-application in photovoltaic systems. Safety requirements and tests |
10/30173705 DC : DRAFT SEP 2010 | BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY |
IEC 60352-7:2002 | Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance |
04/30089617 DC : DRAFT MARCH 2004 | |
BS EN 50521 : 2009 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
08/30179116 DC : DRAFT MAR 2008 | BS EN 50521 - CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
BS EN 61009-1 : 2012 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
15/30269927 DC : 0 | BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS |
04/30106146 DC : DRAFT MARCH 2004 | BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015) |
EN 793 : 1997 | PARTICULAR REQUIREMENTS FOR SAFETY OF MEDICAL SUPPLY UNITS |
ISO/TR 13062:2015 | Electric mopeds and motorcycles - Terminology and classification |
I.S. EN 61008-1:2012&A1:2014/ac&A2:2014...A12:2017 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
I.S. EN 62606:2013 | GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES |
I.S. HD 60364-7-717:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS |
I.S. EN 60335-2-106:2007 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-106: PARTICULAR REQUIREMENTS FOR HEATED CARPETS AND FOR HEATING UNITS FOR ROOM HEATING INSTALLED UNDER REMOVABLE FLOOR COVERINGS |
EN 60601-1-1:2001 | Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems |
CEI EN 62752 : 1ED 2017 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
03/307802 DC : DRAFT MAY 2003 | EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES |
BS ISO 17409 : 2015 | ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS |
NF EN 50065 4-7 : 2005 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND FROM 1,6 MHZ TO 30 MHZ - PART 4-7: PORTABLE LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS |
NF EN 6071999 : 1999 | ELECTRICAL ACCESSORIES - CORD SETS AND INTERCONNECTION CORD SETS |
NF EN 62752 : 2016 | IN-CABLE CONTROL AND PROTECTIVE DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
PD IEC/TS 63066:2017 | Low-voltage docking connectors for removable energy storage units |
BS EN 50066:1993 | Specification for mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles |
BS EN 61643-11 : 2012 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
BIS IS 1293 : 2005 AMD 6 2013 | PLUGS AND SOCKET-OUTLETS OF RATED VOLTAGE UP TO AND INCLUDING 250 VOLTS AND RATED CURRENT UP TO 16 AMPERES - SPECIFICATION |
BIS IS 12640-1 : 2008 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS FOR HOUSEHOLD AND SIMILAR USES - PART 1: CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION (RCCBS) |
IEC 60906-1:2009 | IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c. |
IEC 60799 REDLINE : 3ED 2018 | ELECTRICAL ACCESSORIES - CORD SETS AND INTERCONNECTION CORD SETS |
CSA Z305.8 : 2003 : UPD 1 | MEDICAL SUPPLY UNITS |
I.S. EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV)) |
CSA E670 : 98(R2002) | GENERAL REQUIREMENTS FOR ENCLOSURES AND ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS |
CSA C22.2 No. 60601.1.1 : 2002 : R2006 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
PREN 50066 : DRAFT 2015 | MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
BS EN 62606:2013 | General requirements for arc fault detection devices |
CEI EN 60352-7 : 2003 | SOLDERLESS CONNECTIONS - PART 7: SPRING CLAMP CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
CSA E1008.1 : 0 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
TS 105 175-1 : 2.0.0 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); PLASTIC OPTICAL FIBRE SYSTEM SPECIFICATIONS FOR 100 MBIT/S AND 1 GBIT/S |
UNE-EN 62852:2015 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
I.S. HD 62640:2015 | RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES |
I.S. EN 62196-1:2014 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
I.S. EN 61242:1999 | ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
IEC 60364-7-722:2015 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
ISO 17409:2015 | Electrically propelled road vehicles Connection to an external electric power supply Safety requirements |
IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
EN ISO 17409:2017 | Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements (ISO 17409:2015, Corrected version 2015-12-15) |
BS EN 793:1998 | Particular requirements for safety of medical supply units |
16/30354067 DC : 0 | BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY |
IEC 62852:2014 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
BS EN 60204-32:2008 | Safety of machinery. Electrical equipment of machines Requirements for hoisting machines |
PD IEC/TR 62354:2014 | General testing procedures for medical electrical equipment |
IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
EN 50521:2008/A1:2012 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012) |
EN 60742:1995 | Isolating transformers and safety isolating transformers - Requirements |
EN 50066:1992 | Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles |
EN 60335-2-96:2002/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-96: PARTICULAR REQUIREMENTS FOR FLEXIBLE SHEET HEATING ELEMENTS FOR ROOM HEATING |
EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
EN 50065-4-7 : 2005 COR 2006 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND 1,6 MHZ TO 30 MHZ - PART 4-7: PORTABLE LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS |
DIN EN 61558-2-17 : 1998 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND SIMILAR - PART 2-17: PARTICULAR REQUIREMENTS FOR TRANSFORMERS FOR SWITCH MODE POWER SUPPLIES |
CAN/CSA-E61558-1:12 (R2017) | Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests (Adopted IEC 61558- 1:1997 + A1:1998, edition 2.1, 2009-04 with Canadian deviations) | Sécurité des transformateurs, alimentations, bobines d\'inductance et produits analogues - Partie 1: Exigences générales et essais (norme CEI 61558-1:1997 + A1:1998 adoptée, édition 2.1, 2009-04 avec exigences propres au Canada) |
CSA E61558.1:2012 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
CSA E61558.1 : 2012 : INC : UPD 1 : 2014 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
UNE-HD 60364-7-717:2013 | Low-voltage electrical installations -- Part 7-717: Requirements for special installations or locations - Mobile or transportable units |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
IEC 61540:1997+AMD1:1998 CSV | Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) |
IEC 60228:2004 | Conductors of insulated cables |
IEC 60884-2-6:1997 | Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations |
IEC 60417-1:2002 | Graphical symbols for use on equipment - Part 1: Overview and application |
IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
IEC TR 60083:2015 | Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC |
IEC 60598-2-20:2014 | Luminaires - Part 2-20: Particular requirements - Lighting chains |
IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
IEC 60050-442:1998 | International Electrotechnical Vocabulary (IEV) - Part 442: Electrical accessories |
ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
ISO 2039-2:1987 | Plastics Determination of hardness Part 2: Rockwell hardness |
IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
ISO/IEC Guide 51:2014 | Safety aspects Guidelines for their inclusion in standards |
IEC 60998-2-2:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 61058-1:2016 | Switches for appliances - Part 1: General requirements |
IEC 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
ISO 2093:1986 | Electroplated coatings of tin — Specification and test methods |
IEC 60669-1:2017 | Switches for household and similar fixed-electrical installations - Part 1: General requirements |
ISO 1639:1974 | Wrought copper alloys Extruded sections Mechanical properties |
IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
IEC 60670:1989+AMD1:1994 CSV | General requirements for enclosures for accessories for household and similar fixed electrical installations |
IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
IEC 60998-2-1:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.