IEEE/ASTM SI_10-2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
American National Standard for Metric Practice
Available format(s)
PDF
Superseded date
15-10-2021
Superseded by
Language(s)
English
Published date
11-04-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
Quantities, Units, and Symbols Standards Comm
|
| DocumentType |
Standard
|
| Pages |
78
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM E 1847 : 1996 : R2013 | Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines (Withdrawn 2022) |
| ISO 13837:2008 | Road vehicles Safety glazing materials Method for the determination of solar transmittance |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| ACI 211.3R : 2002 | GUIDE FOR SELECTING PROPORTIONS FOR NO-SLUMP CONCRETE |
| ASTM E 1163 : 2010 : R2016 | Standard Test Method for Estimating Acute Oral Toxicity in Rats |
| FM 1020 : 2007 | AUTOMATIC WATER CONTROL VALVES |
| FM 1610 : 2016 | DUCTILE IRON PIPE AND FITTINGS, FLEXIBLE FITTINGS AND COUPLINGS |
| ASTM D 7478/D7478M : 2011 | Standard Specification for Heavy Duty Sheathed Wood Crates |
| ASTM D 1914 : 1995 : R2014 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
| A-A-52417 Revision A:2009 | BATTERY, STORAGE: ALKALINE, NICKEL-CADMIUM |
| ASTM D 7471 : 2009 : R2014 | Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
| FM 7730 : 2014 | EXPLOSION VENTING DEVICES |
| ASTM E 1562 : 2000 : R2013 | Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids |
| FM 1637 : 2010 | FLEXIBLE SPRINKLER HOSE WITH THREADED END FITTINGS |
| ASTM D 5576 : 2000 : R2006 | Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) |
| FM 2510 : 2014 | FLOOD ABATEMENT EQUIPMENT |
| FM 2000 : 2018 | AUTOMATIC SPRINKLERS FOR FIRE PROTECTION |
| MIL-HDBK-1908 Revision B:1999 | Definitions of Human Factors Terms |
| MIL-STD-38784 Revision A:2011 | GENERAL STYLE AND FORMAT REQUIREMENTS FOR TECHNICAL MANUALS |
| ISO 12108:2012 | Metallic materials Fatigue testing Fatigue crack growth method |
| ASTM F 2146 : 2013 : REDLINE | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM E 2067 : 2015 : REDLINE | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| ASTM F 1951 : 2014 : REDLINE | Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment |
| ASTM D 4603 : 2003 : R2011 : EDT 1 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
| CSA NGV1 : 2017 | COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
| ISA 77.44.02 : 2001 | FOSSIL FUEL POWER PLANT STEAM TEMPERATURE CONTROL SYSTEM - ONCE-THROUGH TYPE |
| ASTM D 5757 : 2011 : R2017 | Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets |
| ASTM D 6338 : 2017 : REDLINE | Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
| ASTM D 5502 : 2000 : R2010 | Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
| IEEE 1541 : 2002 | STANDARD FOR PREFIXES FOR BINARY MULTIPLES |
| ASTM F 2384 : 2010 : R2016 | Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) |
| NFPA 25 : 2017 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS |
| FM 2021,25 : 2010 | AUTOMATIC AND OPEN WATER-SPRAY NOZZLES FOR INSTALLATION IN PERMANENTLY PIPED SYSTEMS |
| CSA 4.6 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| CSA/ANSI Z83.4-2017/CSA 3.7-2017 | Non-recirculating direct gas-fired heating and forced ventilation appliances for commercial and industrial application |
| ANSI Z21.87 : 2007 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ANSI Z21.75 : 2016 | CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES |
| ASTM C 452 : 2015 : REDLINE | TEST METHOD FOR POTENTIAL EXPANSION OF PORTLAND-CEMENT MORTARS EXPOSED TO SULFATE |
| CSA/ANSI Z21.86-2016/CSA 2.32-2016 | Vented gas-fired space heating appliances |
| NFPA T3.19.18 : 2009 | FLUID POWER - SEALING DEVICES - GROOVE DIMENSIONS FOR RADIAL COMPRESSION TYPE PISTON RINGS |
| ASTM D 1990 : 2016 : REDLINE | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ANSI FC 1 : 2012 | STATIONARY FUEL CELL POWER SYSTEMS |
| AASHTO T 98M/T 98 : 2012(R2016) | METHOD OF TEST FOR FINENESS OF PORTLAND CEMENT BY THE TURBIDIMETER |
| ASTM D 698 : 2013-05 | TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3])) |
| ASTM C 1419 : 2014 : REDLINE | Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus |
| ASTM D 4322 : 1996 | Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography |
| ANSI/CSA HGV 4.8-2012 (R2018) | Hydrogen gas vehicle fueling station compressor guidelines |
| NSF 12 : 2017 | AUTOMATIC ICE MAKING EQUIPMENT |
| CSA HPIT 2-2017 | Dispensing systems and components for fueling hydrogen powered industrial trucks |
| API MPM CH15 : 2001(R2015) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 15: GUIDELINES FOR THE USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI) IN THE PETROLEUM AND ALLIED INDUSTRIES |
| FM 5420 : 2007 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| ASTM E 1367 : 2003 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| CSA LNG 2-2017 | LIQUEFIED NATURAL GAS VEHICLE FUEL CONTAINERS |
| ASTM E 1706 : 2005 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
| ASTM E 1415 : 1991 : R2004 | Standard Guide for Conducting Static Toxicity Tests With <i>Lemna gibba</i><b> G3</b> |
| ASTM D 7301 : 2011 : R2015 | Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose |
| ASTM F 1058 : 2016 : REDLINE | Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008) |
| ASTM D 5594 : 1998 : R2004 | Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
| NFPA 25 HANDBOOK : 2011 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS HANDBOOK |
| FM 1313 : 2018 | POSITIVE DISPLACEMENT FIRE PUMPS (ROTARY GEAR TYPE) |
| ASTM F 2181 : 2014 : REDLINE | Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
| ASTM D 6288 : 2017 : REDLINE | Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing |
| CSA/ANSI Z21.18 : 2007 : INC : ADD B : 2012 : R2017 | GAS APPLIANCE PRESSURE REGULATORS |
| ASTM D 5149 : 2002 : R2008 | Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
| IEEE 1505.1-2008 | IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505 |
| ASTM E 1338 : 2009 : R2015 | Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases |
| ASTM C 786/C786M : 2017 : REDLINE | Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods |
| ASTM D 6436 : 2014 : REDLINE | Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers |
| ASTM D 1739 : 1998 : R2017 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| ASTM E 857 : 2005 : EDT 1 | Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species |
| ASTM E 1434 : 2000 | Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 6042 : 2009 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
| ASTM E 1193 : 1997 : R2012 | <i xmlns:a="http://library.astm.org" xmlns="">Daphnia magna</i> |
| ASTM D 1996 : 1997 : R2003 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) (Withdrawn 2009) |
| ASTM E 1022 : 1994 : R2013 | Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks (Withdrawn 2022) |
| ASTM D 4969 : 2017 : REDLINE | Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric |
| ASTM D 3631 : 1999 : R2007 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM D 4603 : 2003 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
| ASTM F 90 : 2014 : REDLINE | Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| ASTM F 1314 : 2018 : REDLINE | Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| ASTM D 3594 : 1993 : R2000 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
| IEEE 1584-2002 | IEEE Guide for Performing Arc Flash Hazard Calculations |
| ASTM C 1479M : 2016 : REDLINE | Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric) |
| ASTM D 5156 : 2002 : R2008 | Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption) |
| ASTM E 2122 : 2002 | Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves |
| ASTM F 2838 : 2017 : REDLINE | Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation |
| ASTM E 1295 : 2001 | Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with <i>Ceriodaphnia dubia</i> |
| ASTM D 5168 : 2012 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM C 1360 : 2017 : REDLINE | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM D 7776 : 2012 | Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories (Withdrawn 2017) |
| ASTM E 1953 : 2014 : REDLINE | Standard Practice for Description of Thermal Analysis and Rheology Apparatus |
| ASTM D 3275 : 2008 | Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
| ASTM D 6585 : 2017 : REDLINE | Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM D 3368 : 2017 : REDLINE | Standard Specification for FEP Sheet and Film |
| ASTM E 1537 : 2016 : REDLINE | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM D 8114 : 2017 | Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition |
| ASTM C 1533 : 2015 : REDLINE | Standard Guide for General Design Considerations for Hot Cell Equipment |
| ASTM E 1688:2010 | Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates |
| ASTM D 2260 : 2003 : R2013 | Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems |
| ASTM F 799 : 2011 : REDLINE | SPECIFICATION FOR COBALT-28CHROMIUM-6MOLYBDENUM ALLOY FORGINGS FOR SURGICAL IMPLANTS (UNS R31537, R31538, R31539) |
| ASTM D 7472 : 2009 | Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
| ASTM D 3094 : 2000 : R2010 | Standard Test Method for Seepage Rate of Aerosol Products |
| ASTM D 5815 : 1995 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC) |
| ASTM E 1367 : 2003 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM E 729 : 1996 : R2002 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
| ASTM E 1391 : 2003 : R2014 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates |
| ASTM D 1557 : 2012 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 3124 : 1998 : R2011 | Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
| ASTM E 2455 : 2006 | Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels |
| ASTM C 1525 : 2004 : R2009 | Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching |
| ASTM E 1525 : 2002 | Standard Guide for Designing Biological Tests with Sediments |
| ASTM E 2230 : 2013 : REDLINE | Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material |
| ASTM F 1332 : 1999 | Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F-25 Supplement to IEEE/ASTM SI 10) |
| ASTM D 6568 : 2000 : R2006 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| ASTM C 1465 : 2008 : R2013 : EDT 1 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
| ASTM C 1366 : 2004 : R2009 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
| ASTM D 5527 : 2000 : R2011 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM D 5527 : 2000 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM F 620 : 2011 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| ASTM D 3465 : 2014 : REDLINE | Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography |
| ASTM F 1332 : 1999 : R2011 | Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10) (Withdrawn 2017) |
| ASTM C 1361 : 2010 : R2015 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures |
| ASTM D 6011 : 1996 : R2008 | Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer |
| ASTM E 1399/E1399M : 1997 : R2013 : EDT 1 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM C 186 : 2017 : REDLINE | Standard Test Method for Heat of Hydration of Hydraulic Cement |
| ASTM E 857 : 2005 | Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species |
| ASTM D 7471 : 2009 | Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
| ASTM D 5485 : 2016 : REDLINE | Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter |
| ASTM D 5594 : 1998 | Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
| ASTM E 1415 : 1991 : R1998 | Standard Guide for Conducting Static Toxicity Tests With Lemna gibba G3 |
| ASTM F 2779 : 2010 : R2016 | Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface |
| ASTM C 1565 : 2017 : REDLINE | Standard Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements |
| ASTM D 5477 : 2011 | Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) |
| ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 1996 : 1997 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) |
| ASTM E 772 : 2015 : REDLINE | Standard Terminology of Solar Energy Conversion |
| ASTM D 5527 : 2000 : R2017 : EDT 1 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM E 1022 : 1994 | Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks |
| ASTM C 1465 : 2008 : R2013 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
| ASTM F 221 : 1998 : R2003 | Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom |
| NFPA 804 : 2015 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| NFPA 12A : 2018 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
| MH1 : 2005 | PALLET, SLIP SHEETS, & OTHER BASES FOR UNIT LOADS |
| NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
| NFPA 17A : 2017 | WET CHEMICAL EXTINGUISHING SYSTEMS |
| ASTM E 2231 : 2018 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| NFPA 851 : 2010 | FIRE PROTECTION FOR HYDROELECTRIC GENERATING PLANTS |
| NFPA 502 : 2017 | ROAD TUNNELS, BRIDGES, AND OTHER LIMITED ACCESS HIGHWAYS |
| NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
| NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
| NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| NFPA 2001 : 2018 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| CSA 6.25 : 2005 : INC : ADD A : 2007 : R2010 | CYLINDER CONNECTION DEVICES |
| CSA 2.33 : 2017 | VENTED GAS FIREPLACE HEATERS |
| ASME B89.1.7 : 2009 : R2014 | PERFORMANCE STANDARD FOR STEEL MEASURING TAPES |
| ASME RT 1 : 2009 | SAFETY STANDARD FOR STRUCTURAL REQUIREMENTS FOR LIGHT RAIL VEHICLES |
| SD 10 : 20031201 | GUIDE FOR IDENTIFICATION AND DEVELOPMENT OF METRIC STANDARDS |
| ASME B89.1.7 : 2009 | PERFORMANCE STANDARD FOR STEEL MEASURING TAPES |
| A-A-52432 Revision B:2011 | MIRROR ASSEMBLY, REARVIEW: AUTOMOTIVE EXTERIOR MOUNTING |
| CSA HGV 4.9 : 2016 | HYDROGEN FUELING STATIONS |
| ASTM D 3594 : 1993 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
| FM 1950 : 2016 | SEISMIC SWAY BRACES FOR PIPE, TUBING AND CONDUIT |
| NSF 21 : 2015 | THERMOPLASTIC REFUSE CONTAINERS |
| ASTM E 1706 : 2005 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
| ASTM D 7472 : 2009 : R2014 | Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
| FM 5560 : 2017 | WATER MIST SYSTEMS |
| ASTM E 1706 : 2005 : R2010 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates (Withdrawn 2019) |
| BS IEC 63004:2015 | Standard for receiver fixture interface |
| ASTM D 3222 : 2005 : R2015 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
| 17/30293100 DC : 0 | BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| ASTM D 3675 : 2017 : REDLINE | TEST METHOD FOR SURFACE FLAMMABILITY OF FLEXIBLE CELLULAR MATERIALS USING A RADIANT HEAT ENERGY SOURCE |
| AASHTO M 203M/M 203 : 2012 | SPECIFICATION FOR STEEL STRAND, UNCOATED SEVEN-WIRE FOR CONCRETE REINFORCEMENT |
| ASTM C 1465 : 2008 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
| A-A-59797 Revision A:2009 | HAND WASH STATION, FIELD |
| FM 1421 : 2007 | MONITOR ASSEMBLY |
| ANSI Z21.77 : 2005 : R2015 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
| ASTM D 6867 : 2003 | Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing |
| ASTM C 1421 : 2018 : REDLINE | Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature |
| ASTM D 6026 : 2013 : REDLINE | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM E 1415 : 1991 : R2004 : EDT 1 | Standard Guide for Conducting Static Toxicity Tests With <i>Lemna gibba</i> G3 |
| ASTM C 909 : 1993 : R2000 | Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes |
| ASTM D 5502 : 2000 | Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
| CSA 4.4 : 2015 | RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
| ASTM D 6275 : 1998 | Standard Practice for Laboratory Testing of Bridge Decks |
| ASTM C 861 : 1993 : R2000 | Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes |
| ASTM F 560 : 2017 : REDLINE | Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) |
| A-A-52193 Revision G:2015 | FOOD CONTAINER, INSULATED, WITH INSERTS |
| ACI 126.3R : 1999 | GUIDE TO RECOMMENDED FORMAT FOR CONCRETE IN MATERIALS PROPERTY DATABASE |
| FM 1614 : 2017 | FIBER REINFORCED COMPOSITE (FRC) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE |
| A-A-55762 Revision A:2011 | RUBBER, SILICONE; STRIP, SHAPE 18 |
| ASTM E 1366 : 2011 | Standard Practice for Standardized Aquatic Microcosms: Fresh Water |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| CSA 6.23 : 2005 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
| ANSI Z83.20 : 2016 | GAS-FIRED TUBULAR AND LOW-INTENSITY INFRARED HEATERS |
| CSA/ANSI Z83.25 : 2017 | DIRECT GAS-FIRED PROCESS AIR HEATERS |
| MIL-STD-967 Base Document:2003 | DEFENSE HANDBOOKS FORMAT AND CONTENT |
| NFPA 291 : 2016 | FIRE FLOW TESTING AND MARKING OF HYDRANTS |
| ASTM E 1023 : 1984 : R1996 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
| FM 4999 : 2007 | SPRAY FIRE SHIELDS |
| ASTM D 6330 : 1998 : R2014 | Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
| CSA 1.8 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| IEEE C57.144 : 2004 | GUIDE FOR METRIC CONVERSION OF TRANSFORMER STANDARDS |
| ASTM E 1562 : 2000 | Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids |
| NFPA 12 : 2018 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| CSA/ANSI Z21.80 : 2011 : INC : ADD A : 2012 : R2016 | LINE PRESSURE REGULATORS |
| CSA 6.10 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| CSA 4.6 : 2007 : INC : ADD A : 2010 : R2016 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| CSA 4.9 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| ASTM D 4826 : 1988 : R2002 | Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard |
| CSA 6.16 : 2015 | CONNECTORS FOR MOVEABLE GAS APPLIANCES |
| CSA/ANSI Z21.80 : 2011 : INC : ADD A : 2012 | LINE PRESSURE REGULATORS |
| ASTM E 1733 : 1995 | Standard Guide for Use of Lighting in Laboratory Testing |
| CSA/ANSI Z21.13 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| CSA/ANSI Z21.15 : 2009 : INC : ADD A : 2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ASTM F 2384 : 2010 | Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) |
| ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ANSI Z21.81 : 2005 : INC : ADD A : 2007 : R2010 | CYLINDER CONNECTION DEVICES |
| ASTM D 2238 : 1992 : R1999 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm |
| ANSI Z21.97-2017/CSA 2.41-2017 | Outdoor decorative gas appliances |
| ASTM C 778 : 2017 : REDLINE | Standard Specification for Standard Sand |
| FM 1112 : 2006 | INDICATING VALVES (BUTTERFLY OR BALL TYPE) |
| FM 1312 : 2018 | CENTRIFUGAL FIRE PUMPS (VERTICAL-SHAFT, TURBINE TYPE) |
| FM 1615 : 2009 | CAST IRON PIPE, FITTINGS AND COUPLINGS |
| AASHTO T 137 : 2012(R2016) | METHOD OF TEST FOR AIR CONTENT OF HYDRAULIC CEMENT MORTAR |
| NSF 52 : 2017 | SUPPLEMENTAL FLOORING |
| ASTM D 6011 : 1996 : R2015 | Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer |
| ASTM E 1163 : 2010 | Standard Test Method for Estimating Acute Oral Toxicity in Rats |
| FM 2030 : 2009 | RESIDENTIAL AUTOMATIC SPRINKLERS FOR FIRE PROTECTION |
| ASTM C 1326 : 2013 : R2018 | Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics |
| ASCE/CI 36 15 : 2015 | STANDARD DESIGN AND CONSTRUCTION GUIDELINES FOR MICROTUNNELING |
| ISA 77.42.01 : 1999 : R2006 | FOSSIL FUEL POWER PLANT FEEDWATER CONTROL SYSTEM - DRUM TYPE |
| CSA 2.22 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
| IEC 63004:2015 | Standard for receiver fixture interface |
| CSA/ANSI Z21.18 : 2007 : INC : ADD B : 2012 | GAS APPLIANCE PRESSURE REGULATORS |
| FM 1230 : 2013 | ANTI-WATER HAMMER CHECK VALVES |
| ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
| FM 5320 : 2013 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| ASTM F 1251 : 1989 : R1995 | Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices |
| ASTM D 420 : 2018 | Standard Guide for Site Characterization for Engineering Design and Construction Purposes |
| ASTM E 1366 : 2011 : R2016 | Standard Practice for Standardized Aquatic Microcosms: Fresh Water |
| ASTM C 1624 : 2005 : R2015 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
| ASTM C 1157/C1157M : 2017 : REDLINE | Standard Performance Specification for Hydraulic Cement |
| NSF 14159-3 : 2010 | HYGIENE REQUIREMENTS FOR THE DESIGN OF MECHANICAL BELT CONVEYORS USED IN MEAT AND POULTRY PROCESSING EQUIPMENT |
| ASTM E 1391 : 2003 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates |
| ASTM C 769 : 2015 : REDLINE | Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus |
| ASTM D 7083 : 2016 : REDLINE | Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography |
| (INACTIVE RECORD)ASTM D 5336 : 2015-04 | CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS |
| ASTM E 1309 : 2000 | Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases |
| ASTM D 5149 : 2002 | Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
| FM 6320 : 2018 | COMBUSTIBLE GAS DETECTORS |
| ASTM C 91 : 2005 | Standard Specification for Masonry Cement |
| ASTM E 1594 : 2016 : REDLINE | Standard Guide for Expression of Temperature |
| ASTM C 1329 : 2005 | Standard Specification for Mortar Cement |
| ASTM F 1586 : 2013 : EDT 1 | Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) |
| ASTM D 6414 : 2014 : REDLINE | Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption |
| ASTM C 1469 : 2010 : R2015 | Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature |
| ASTM D 5149 : 2002 : R2016 | Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
| ASTM F 2869 : 2010 : R2016 | Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface |
| ASTM F 1108 : 2014 : REDLINE | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM C 928 : 2005 | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
| ASTM D 3594 : 1993 : R2006 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
| ASTM F 620 : 2011 : R2015 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| ASTM E 337 : 2015 : REDLINE | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM D 5575 : 2007 : R2013 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| ASTM F 3273 : 2017 | Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
| ASTM D 6718 : 2002 | Standard Practice for Writing Committee D 13 Standards (Withdrawn 2011) |
| ASTM D 5085 : 2002 : R2008 | Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
| ASTM E 1611 : 2000 : R2013 | Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids |
| ASTM D 3631 : 1999 : R2017 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM D 3222 : 2005 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
| ASTM E 1295 : 2001 : R2006 | Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with <i> Ceriodaphnia dubia</i> |
| ASTM D 5574 : 1994 : R1999 : EDT 1 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM D 3275 : 2008 : R2013 | Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
| ASTM D 4441 : 2015 : REDLINE | Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
| ASTM D 6867 : 2003 : R2014 | Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing |
| ASTM D 7779 : 2011 | Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature |
| ASTM C 183/C183M : 2016 : REDLINE | Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
| ASTM C 1862 : 2017 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
| ASTM D 5017 : 2017 : REDLINE | Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance |
| ASTM D 7478/D7478M : 2011 : R2017 | Standard Specification for Heavy Duty Sheathed Wood Crates |
| ASTM D 4001 : 2013 : REDLINE | Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering |
| ASTM E 1023 : 1984 : R2014 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
| ASTM D 2260 : 2003 | Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems |
| ASTM C 1615/C1615M : 2017 : REDLINE | Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities |
| ASTM D 5574 : 1994 : R2012 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM F 480 : 2014 : REDLINE | Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
| ASTM E 1367 : 2003 : R2008 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM D 6457 : 2008 : R2013 | Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) (Withdrawn 2018) |
| ASTM C 1328 : 2005 | Standard Specification for Plastic (Stucco) Cement |
| ASTM D 7219 : 2008 : R2014 | Standard Specification for Isotropic and Near-isotropic Nuclear Graphites |
| ASTM D 2238 : 1992 : R2004 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm |
| ASTM E 1338 : 2009 | Guide for Identification of Metals and Alloys in Computerized Material Property Databases |
| ASTM D 6255/D6255M : 2005 : R2011 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
| ASTM C 10/C10M : 2014 : REDLINE | Standard Specification for Natural Cement |
| ASTM E 1415 : 1991 : R2012 | Standard Guide for Conducting Static Toxicity Tests With <i>Lemna gibba</i> G3 (Withdrawn 2021) |
| ASTM D 3159 : 2015 : REDLINE | Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
| ASTM F 2989 : 2013 : REDLINE | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| ASTM C 1107 : 2007 | SPECIFICATION FOR PACKAGED DRY, HYDRAULIC-CEMENT GROUT (NONSHRINK) |
| ASTM E 1525 : 2002 : R2008 | Standard Guide for Designing Biological Tests with Sediments |
| ASTM F 2229 : 2012 : REDLINE | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| ASTM E 2102 : 2017 : REDLINE | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM E 2122 : 2002 : R2013 | Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves (Withdrawn 2022) |
| ASTM C 1469 : 2010 | Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| MH1 : 2016 | PALLET, SLIP SHEETS, & OTHER BASES FOR UNIT LOADS |
| NFPA 1962 : 2018 | CARE, USE, INSPECTION, SERVICE TESTING, AND REPLACEMENT OF FIRE HOSE, COUPLINGS, NOZZLES, AND FIRE HOSE APPLIANCES |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
| IEC 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
| CSA HPIT 1 : 2015 | COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS |
| CSA HPIT 1:15 (R2020) | Compressed hydrogen powered industrial truck on-board fuel storage and handling components |
| CSA 2.6 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| NSF 169 : 2016 | SPECIAL PURPOSE FOOD EQUIPMENT AND DEVICES |
| NFPA 230 : 2003 | FIRE PROTECTION OF STORAGE |
| CSA/ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| CSA 6.27 : 2016 | CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| AASHTO M 280 : 2014 | SPECIFICATION FOR METALLIC-COATED (CARBON) STEEL BARBED WIRE |
| ANSI/NEMA C29.2B:2013 | American National Standard for Insulators-Wet Process Porcelain and Toughened Glass—Transmission Suspension Type |
| NEMA C29.2A : 2013 | WET PROCESS PORCELAIN AND TOUGHENED GLASS - DISTRIBUTION SUSPENSION TYPE |
| ASME Y14.5 : 2009 | DIMENSIONING AND TOLERANCING |
| ASTM C 909 : 1993 : R2010 | Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes |
| NSF 24 : 2015 | PLUMBING SYSTEM COMPONENTS FOR RECREATIONAL VEHICLES |
| AASHTO T 106M/T 106 : 1900 | METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR (USING 50-MM OR 2-IN. CUBE SPECIMENS) |
| CSA/ANSI NGV1 : 2017 | COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
| FM 5970 : 2015 | HEAVY DUTY MOBILE EQUIPMENT PROTECTION SYSTEMS |
| AOP 20 : 2017 | SAFETY, ARMING AND FUNCTIONING SYSTEMS MANUAL OF TESTS |
| API MPMS CH9.4 : 2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 9.4 - CONTINUOUS DENSITY MEASUREMENT UNDER DYNAMIC (FLOWING) CONDITIONS |
| ASTM D 4361 : 2010 : REDLINE | TEST METHOD FOR DETERMINING LOGARITHMIC VISCOSITY NUMBER OF POLY (VINYL CHLORIDE) (PVC) IN FORMULATED COMPOUNDS |
| ASTM C 1624 : 2005 : R2010 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
| NSF 18:2016 | MANUAL FOOD AND BEVERAGE DISPENSING EQUIPMENT |
| ASTM E 1193 : 1997 : R2004 | Standard Guide for Conducting <I>Daphnia magna</I> Life-Cycle Toxicity Tests |
| FM 2008 : 2018 | QUICK RESPONSE STORAGE SPRINKLERS FOR FIRE PROTECTION |
| A-A-59793 Revision A:2007 | PANS, STAINLESS STEEL, WITH NO-STICK COATED FINISH |
| BS IEC 63003:2015 | Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505<sup>TM</sup> |
| ASTM E 1023 : 1984 : R2007 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
| CSA 6.9 : 2014 | QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES |
| BS EN 60469:2013 | Transitions, pulses and related waveforms. Terms, definitions and algorithms |
| UFC 1-300-02 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - UNIFIED FACILITIES GUIDE SPECIFICATIONS (UFGS) FORMAT STANDARD |
| ASTM D 7399 : 2008 | Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR) (Withdrawn 2017) |
| FM 1035 : 2014 | NITROGEN GENERATORS |
| ASTM F 2527 : 2016 : REDLINE | Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537) |
| A-A-52412 Revision A:2011 | INCLINOMETER, BALL STYLE |
| BS IEC 62529:2012 | IEEE standard for signal and test definition |
| ASTM D 4322 : 1996 : R2001 : EDT 1 | Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography (Withdrawn 2010) |
| CSA/ANSI Z21.18 : 2007 : R2012 | GAS APPLIANCE PRESSURE REGULATORS |
| ASTM E 1023 : 1984 : R2002 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
| ASTM D 5015 : 2015 : REDLINE | Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
| FM 5580 : 2012 | HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS |
| ASTM C 158 : 2002 : R2017 | Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture) |
| NFPA 410 : 2015 | AIRCRAFT MAINTENANCE |
| ASTM E 729 : 1996 : R2007 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
| ASTM D 6894 : 2013 : REDLINE | Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine |
| ASTM D 5576:2000 | Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectroscopy (FT-IR) |
| CSA 6.3 : 2007 | GAS APPLIANCES PRESSURE REGULATORS |
| A-A-52465 Revision B:2016 | PRIMER COATING, SYNTHETIC, VOC COMPLIANT (FOR BRAKE DRUMS) |
| ASTM C 559 : 2016 : REDLINE | Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles |
| I.S. EN 60469:2013 | TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS (IEC 60469:2013 (EQV)) |
| ASTM E 857 : 2005 : R2012 | Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species |
| SAE AS5716A | Standard Electrical and Logical Interface for Airborne Fuzing Systems |
| ASTM E 1434 : 2000 : R2013 | Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases (Withdrawn 2015) |
| ASTM F 496 : 2014-04 | SPECIFICATION FOR IN-SERVICE CARE OF INSULATING GLOVES AND SLEEVES |
| CSA 6.8 : 2005 : INC : ADD A : 2010 : R2015 | PILOT GAS FILTERS |
| ASTM F 2912 : 2017 : REDLINE | Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings |
| A-A-52202 Revision C:2012 | OPENER, CAN, HAND, FOR SQUARE AND ROUND FOOD CANS |
| CSA/ANSI Z21.54 : 2014 | GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES |
| ASTM A 1007 : 2015 : REDLINE | Standard Specification for Carbon Steel Wire for Wire Rope |
| ASTM D 3124 : 1998 : R2003 | Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
| CSA 2.3 : 2016 | GAS-FIRED CENTRAL FURNACES |
| ANSI Z21.87 :2007 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ASTM D 3016 : 1997 : R2018 | Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships |
| CSA/ANSI Z21.60-2017/CSA 2.26-2017 | Decorative gas appliances for installation in solid-fuel burning fireplaces |
| ASTM D 6568 : 2000 : R2011 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| ASTM C 1337 : 2017 : REDLINE | Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures |
| ASTM F 1642/F1642M : 2017 : REDLINE | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
| ASTM E 2707 : 2015 : REDLINE | Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure |
| ASTM D 245 : 2006 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
| ANSI Z21.78 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| FM 1056 : 2010 | SIGHT DRAINS FOR AUTOMATIC SPRINKLER SYSTEMS |
| FM 6036 : 2013 | FLEXIBLE HOSE ASSEMBLIES FOR FLAMMABLE GASES AND/OR IGNITABLE LIQUIDS |
| ASTM F 139 : 2012 | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
| CSA/ANSI Z21.15 : 2009 : INC : ADD B : 2013 : R2014 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ANSI Z21.88 : 2017 | VENTED GAS FIREPLACE HEATERS |
| ASTM D 3016 : 1997 : R2010 | Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships |
| CSA 6.31 : 2006 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
| CSA 6.31 : 2006 : INC : ADD A : 2007 : R2011 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
| NFPA 57 : 2002 | LIQUEFIED NATURAL GAS (LNG) VEHICULAR FUEL SYSTEMS CODE |
| IEC 62265:2005 | Advanced Library Format (ALF) describing Integrated Circuit (IC) technology, cells and blocks |
| ASTM D 3124 : 1998 | Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
| NSF 14159-2 : 2014 | HYGIENE REQUIREMENTS FOR THE DESIGN OF HAND HELD TOOLS USED IN MEAT AND POULTRY PROCESSING |
| ASTM D 5502 : 2000 : R2005 | Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
| ANSI Z21.97 : 2017 | OUTDOOR DECORATIVE GAS APPLIANCES |
| CSA B108 : 2014 | COMPRESSED NATURAL GAS FUELLING STATIONS INSTALLATION CODE |
| NSF 6 : 2016 | DISPENSING FREEZERS |
| ASTM D 5168 : 2012 : R2017 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ANSI Z21.22 : 2015 | RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
| ASTM C 1819 : 2015 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts |
| ASTM E 1399 : 1997 : R2009 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| NSF 3 : 2017 | COMMERCIAL WAREWASHING EQUIPMENT |
| FM 7400 : SEP 2016 | LIQUID AND GAS SAFETY SHUTOFF VALVES |
| NSF 36 : 2012 | |
| CSA 6.22 : 2011 : ADD 1 : INC : ADD A : 2012 | LINE PRESSURE REGULATORS |
| CSA HGV 4.10 : 2012 | STANDARD FOR FITTINGS FOR COMPRESSED HYDROGEN GAS AND HYDROGEN RICH GAS MIXTURES |
| ASTM E 1022 : 1994 : R2002 | Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks |
| CSA/ANSI HGV 3.1 : 2015 | FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES |
| CSA 6.22 : 2011 : INC : ADD A : 2012 : R2016 | LINE PRESSURE REGULATORS |
| NSF 170 : 2017 | GLOSSARY OF FOOD EQUIPMENT TERMINOLOGY |
| ASTM D 6265 : 2017 : REDLINE | Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| CSA O141 : 2005 : R2014 | SOFTWOOD LUMBER |
| AASHTO T 127 : 2015 | METHOD OF TEST FOR SAMPLING AND AMOUNT OF TESTING OF HYDRAULIC CEMENT |
| CSA/ANSI Z21.18 : 2007 : INC : ADD A : 2010 | GAS APPLIANCE PRESSURE REGULATORS |
| ASTM D 5204 : 2017 : REDLINE | CLASSIFICATION SYSTEM FOR POLYAMIDE-IMIDE (PAI) MOLDING AND EXTRUSION MATERIALS |
| ASTM E 2575 : 2008 | Standard Test Method for Determination of Oxygen in Copper and Copper Alloys (Withdrawn 2017) |
| ASTM C 1402 : 2017 : REDLINE | Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples |
| CSA/ANSI Z21.18 : 2007 | GAS APPLIANCE PRESSURE REGULATORS |
| ASTM D 5524 : 1994 : R2001 : EDT 1 | Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography (Withdrawn 2009) |
| AASHTO T 27 : 2014 | METHOD OF TEST FOR SIEVE ANALYSIS OF FINE AND COARSE AGGREGATES |
| FM 4880 : 2017 | EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS |
| ASTM D 4473 : 2008 : R2016 | Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior |
| ASTM E 1191 : 2003 : REV A : R2008 | Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids |
| ASTM D 6042 : 2009 : R2016 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
| ASTM D 6568 : 2000 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| ASTM D 4203 : 2017 : REDLINE | Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
| ASTM E 1399 : 1997 : R2005 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM F 1332 : 1999 : R2005 | Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10) |
| BS ISO 12108:2012 | Metallic materials. Fatigue testing. Fatigue crack growth method |
| ASTM D 7193 : 2017 : REDLINE | Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM C 1366 : 2004 : R2013 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
| ASTM D 5086 : 2001 | Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
| ASTM E 1611 : 2000 : R2007 | Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids |
| ASTM D 3631 : 1999 : R2011 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM E 1733 : 1995 : R2002 : EDT 1 | Standard Guide for Use of Lighting in Laboratory Testing |
| ASTM E 2599 : 2018 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
| ASTM D 5576 : 2000 : R2013 | Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) |
| ASTM D 2116 : 2016 : REDLINE | Standard Specification for FEP Resin Molding and Extrusion Materials |
| ASTM D 1914 : 1995 : R1999 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis Atmospheres |
| ASTM F 2869 : 2010 | Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface |
| ASTM E 1191 : 2003 : REV A | Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids |
| FM 1530 : 2016 | FIRE DEPARTMENT CONNECTIONS |
| ASTM D 6568 : 2000 : R2018 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| ASTM D 6011 : 1996 : R2003 | Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer |
| ASTM C 150/C150M : 2017-04 | SPECIFICATION FOR PORTLAND CEMENT |
| ASTM F 1870 : 2016 : REDLINE | Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities |
| ASTM F 961 : 2014 : REDLINE | Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
| ASTM F 2257 : 2014 : REDLINE | Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) |
| ASTM D 5026 : 2015 : REDLINE | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension |
| ASTM D 6722 : 2011 : REDLINE | Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis |
| ASTM C 1424 : 2015 : REDLINE | TEST METHOD FOR MONOTONIC COMPRESSIVE STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE |
| ASTM C 1525 : 2004 | Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching |
| ASTM D 3648 : 2014 : REDLINE | Standard Practices for the Measurement of Radioactivity (Withdrawn 2023) |
| ASTM E 1191 : 2003 : REV A : R2014 | Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids |
| ASTM F 414 : 2015 : REDLINE | Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger |
| ASTM C 1475 : 2017 : REDLINE | Standard Guide for Determination of Neptunium-237 in Soil |
| ASTM D 6275 : 1998 : R2003 | Standard Practice for Laboratory Testing of Bridge Decks (Withdrawn 2004) |
| IEC 63003:2015 | Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505™ |
| NSF 2 : 2015 | FOOD EQUIPMENT |
| NSF 49 : 2016 | BIOSAFETY CABINETRY: DESIGN, CONSTRUCTION, PERFORMANCE, AND FIELD CERTIFICATION |
| CSA 6.25 : 2005 | CYLINDER CONNECTION DEVICES |
| CSA 6.20 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| ASTM C 1620 : 2016-03 | SPECIFICATION FOR AEROSOL POLYURETHANE AND AEROSOL LATEX FOAM SEALANTS |
| ASTM E 1602 : 2003 : R2017 | Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
| ASTM E 1602 : 2003 | Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
| NSF 7 : 2016 | COMMERCIAL REFRIGERATORS AND FREEZERS |
| CSA 6.20 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| CSA 9.1 : 2009 : INC : ADD B : 2013 : R2014 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| NASA HDBK 6007 : 2013 | HANDBOOK FOR RECOMMENDED MATERIAL REMOVAL PROCESSES FOR ADVANCED CERAMIC TEST SPECIMENS AND COMPONENTS |
| NSF 20 : 2016 | COMMERCIAL BULK MILK DISPENSING EQUIPMENT |
| ASTM E 1602 : 2003 : R2010 : EDT 1 | Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
| CSA 9.1 : 2009 : INC : ADD A : 2012 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| CSA/ANSI Z83.8 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
| ASTM E 2634 : 2017-06 | SPECIFICATION FOR FLAT WALL INSULATING CONCRETE FORM (ICF) SYSTEMS |
| CSA 2.37 : 2014 | GAS-FIRED OUTDOOR INFRARED PATIO HEATERS |
| CSA 9.1 : 2009 : INC : ADD B : 2013 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| CSA 9.1 : 2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| ASTM F 2885 : 2017 : REDLINE | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| ASTM D 5574 : 1994 : R2005 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM D 5814 : 2011-01 | PRACTICE FOR DETERMINATION OF CONTAMINATION IN RECYCLED POLY(ETHYLENE TEREPHTHALATE) (PET) FLAKES AND CHIPS USING A PLAQUE TEST |
| FM 5551 : 1963 | STRAINERS FOR USE WITH WATER BASED FIRE PROTECTION SYSTEMS |
| ASTM D 5524 : 1994 | Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography |
| API MPM CH15 : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 15: GUIDELINES FOR THE USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI) IN THE PETROLEUM AND ALLIED INDUSTRIES |
| ANSI Z21.69 : 2015 | CONNECTORS FOR MOVEABLE GAS APPLIANCES |
| ASTM C 115 : 2010 | Standard Test Method for Fineness of Portland Cement by the Turbidimeter |
| FM 1951,52,53 : 2016 | PIPE HANGER COMPONENTS FOR AUTOMATIC SPRINKLER SYSTEMS |
| A-A-52201 Revision B:2010 | Pan, Baking and Roasting, Aluminum; Pan Cover and Warmer Adapter; for Range, Field, Gasoline |
| CSA/ANSI Z21.18 : 2007 : INC : ADD A : 2010 : R2012 | GAS APPLIANCE PRESSURE REGULATORS |
| CSA B109 : 2017 | NATURAL GAS FOR VEHICLES INSTALLATION CODE |
| ASTM C 1327 : 2015 : REDLINE | TEST METHOD FOR VICKERS INDENTATION HARDNESS OF ADVANCED CERAMICS |
| ASTM E 2431 : 2012 : REDLINE | Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings |
| ASTM D 1739 : 1998 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| IEEE 1278.1-2012 REDLINE | IEEE Standard for Distributed Interactive Simulation--Application Protocols |
| NFPA T3.5.14 : 2009 : R2014 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
| API 16A CHINESE : 2004 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| FM 4924 : 2013 | PIPE AND DUCT INSULATION |
| BS IEC 62265:2005 | Advanced library format (ALF) describing integrated circuit (IC) technology, cells and blocks |
| ASTM D 6011 : 1996 | Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer |
| ASTM D 7115 : 2010 | Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
| ASTM E 1847 : 1996 | Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines |
| FM 1043 : 2011 | WATER FLOW DETECTOR TESTERS 1 INCH THROUGH 8 INCH NOMINAL SIZE |
| ASTM C 1326 : 2013 | Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics |
| ASTM C 1725 : 2017 : REDLINE | Standard Guide for Hot Cell Specialized Support Equipment and Tools |
| ASTM F 2886 : 2017 : REDLINE | Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| ASTM D 1739 : 1998 : R2004 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| ASTM D 6645 : 2001 | Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry |
| FM 1333 : 2018 | DIESEL ENGINE FIRE PUMP DRIVERS |
| MIL-DTL-32532 Base Document:2015 | LIFE RAFT, INFLATABLE, 25-PERSON MARK-7 MOD 2, AND 50-PERSON MARK-8 MOD 2 |
| A-A-50179 Revision C:2015 | PANS, WITH OR WITHOUT COVERS, FOOD SERVING, RECTANGULAR, SOUP TUREEN AND ROUND INSETS FOR HOT FOOD TABLES AND COLD FOOD COUNTERS |
| FM 1344 : 2010 | AIR RELEASE VALVES 1/2 INCH THROUGH 1 INCH NOMINAL SIZE |
| NSF 37 : 2017 | AIR CURTAIN FOR ENTRANCEWAYS FOR FOOD AND FOOD SERVICE ESTABLISHEMENTS |
| A-A-55057 Revision B:2010 | PANELS, WOOD/WOOD BASED: CONSTRUCTION AND DECORATIVE |
| CSA 8.4 : 2014 | GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES |
| A-A-52420 Revision A:2013 | Plug, Expansion |
| UFC 1-300-01 : V20060228 | UNIFIED FACILITIES CRITERIA - CRITERIA FORMAT STANDARD |
| A-A-55760 Revision A:2011 | RUBBER, SILICONE; STRIP, SHAPE 16 |
| ASTM E 1847 : 1996 : R2003 | Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines |
| MSS SP 86 : 2014 | GUIDELINES FOR METRIC DATA IN STANDARDS FOR VALVES, FLANGES, FITTINGS, AND ACTUATORS |
| ASTM E 2573 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
| ASTM E 729 : 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
| ASTM D 5527 : 2000 : R2007 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ISA RP42.00.01 : 2001 | NOMENCLATURE FOR INSTRUMENT TUBE FITTINGS |
| ASTM D 4727/D4727M : 2017 : REDLINE | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| ASTM D 5086 : 2001 : R2008 | Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
| AASHTO M 201 : 2015 | SPECIFICATION FOR MIXING ROOMS, MOIST CABINETS, MOIST ROOMS, AND WATER STORAGE TANKS USED IN THE TESTING OF HYDRAULIC CEMENTS AND CONCRETES |
| ANSI Z21.77 : 2005 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
| ASTM E 2929 : 2013 | Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction |
| ANSI Z83.26 : 2014 | GAS-FIRED OUTDOOR INFRARED PATIO HEATERS |
| SAE J2600_201510 | Compressed Hydrogen Surface Vehicle Fueling Connection Devices |
| ASTM D 4474 : 2000 | Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008) |
| ASTM D 5594 : 1998 : R2012 | Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
| ASTM F 562 : 2013 : REDLINE | Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
| ASTM E 1740 : 2015 : REDLINE | Standard Test Method for Determining the Heat Release Rate and Other<brk/> Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
| FM 4471 : 2010 | CLASS 1 PANEL ROOFS |
| CSA/ANSI Z21.94 : 2006 : INC : ADD A : 2007 : R2016 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
| ANSI Z21.81 : 2005 | CYLINDER CONNECTION DEVICES |
| CSA/ANSI Z21.15 : 2009 : INC : ADD B : 2013 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| SAE TSB003_199905 | Rules for SAE Use of SI (Metric) Units |
| ANSI Z21.81 : 2005 : INC : ADD A : 2007 : R2015 | CYLINDER CONNECTION DEVICES |
| CSA/ANSI Z21.15:2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ANSI Z21.78 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| CSA/ANSI Z21.94 : 2006 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
| CSA 6.3 : 2007 : INC : ADD A : 2010 | GAS APPLIANCES PRESSURE REGULATORS |
| ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2017 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ASTM D 5156 : 2002 : R2016 | Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption) |
| CSA 6.31 : 2006 : INC : ADD A : 2007 : R2016 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
| FM 5138 : 2011 | PROPORTIONING TESTING |
| NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
| ASTM E 1192 : 1997 : R2014 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
| ASTM D 4800 : 1994 : R2005 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM E 1590 : 2017 : REDLINE | Standard Test Method for Fire Testing of Mattresses |
| NSF 14159-1 : 2014 | HYGIENE REQUIREMENTS FOR THE DESIGN OF MEAT AND POULTRY PROCESSING EQUIPMENT |
| ANSI Z83.20-2016/CSA 2.34-2016 | Gas-fired tubular and low-intensity infrared heaters |
| ASTM D 6880 : 2005 | Standard Specification for Wood Boxes |
| IEEE 1641.1-2013 | IEEE Guide for the Use of IEEE Std 1641, IEEE Standard for Signal and Test Definition |
| ISA 77.42.01 : 1999 | FOSSIL FUEL POWER PLANT FEEDWATER CONTROL SYSTEM - DRUM TYPE |
| ASTM E 1191 : 2003 | Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids |
| NSF 5 : 2016 | WATER HEATERS, HOT WATER SUPPLY BOILERS, AND HEAT RECOVERY EQUIPMENT |
| ASTM F 221 : 1998 | Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom |
| ASTM E 1782 : 2014 : REDLINE | Standard Test Method for Determining Vapor Pressure by Thermal Analysis |
| CSA 12.3 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| FM 1370 : 2018 | CENTRIFUGAL FIRE PUMPS (VERTICAL SHAFT, TURBINE TYPE, BARREL) |
| FM 1311 : 2018 | CENTRIFUGAL FIRE PUMPS SPLIT-CASE TYPE (AXIAL OR RADIAL) |
| CSA 6.22 : 2011 | LINE PRESSURE REGULATORS |
| FM 6020 : 2016 | COMPOSITE INTERMEDIATE BULK CONTAINERS (IBCS) |
| ASTM F 1295 : 2016 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| FM 5600 : 2013 | CLEAN AGENT EXTINGUISHING SYSTEMS |
| NFPA 22 : 2018 | WATER TANKS FOR PRIVATE FIRE PROTECTION |
| IEEE DRAFT 1671 : D5 2006 | AUTOMATIC TEST MARKUP LANGUAGE (ATML) FOR EXCHANGING AUTOMATIC TEST EQUIPMENT AND TEST INFORMATION VIA XML |
| CSA O141 :2005 | SOFTWOOD LUMBER |
| ASTM C 1499 : 2015 : REDLINE | TEST METHOD FOR MONOTONIC EQUIBIAXIAL FLEXURAL STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE |
| ASTM D 4826 : 1988 : R1997 | Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard |
| ASTM D 1914 : 1995 : R2010 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
| ASTM F 67 : 2013 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| NSF 29 : 2017 | DETERGENT AND CHEMICAL FEEDERS FOR COMMERCIAL SPRAY-TYPE DISHWASHING MACHINES |
| ASTM D 6573/D6573M : 2013 : REDLINE | Standard Specification for General Purpose Wirebound Shipping Boxes |
| ASTM D 4800 : 1994 : R1999 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM C 1479 : 2016 : REDLINE | Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations |
| ASTM E 729 : 1996 : R2014 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
| ASTM E 2404 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
| ASTM D 6645 : 2001 : R2010 | Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry |
| ASTM E 2688 : 2018 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics |
| FM 1055 : 2016 | WATER MOTOR GONGS |
| NSF 13 : 2017 | REFUSE PROCESSORS AND PROCESSING SYSTEMS |
| ASTM E 1562 : 2000 : R2006 | Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids |
| ASTM C 861 : 1993 : R2014 | Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes |
| ASTM C 909 : 1993 : R2005 | Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes |
| ASTM D 6255/D6255M:2005 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
| ASTM D 5991 : 2017 : REDLINE | Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake |
| ASTM D 5527 : 2000 : R2002 : EDT 1 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM D 6330 : 1998 | Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
| ASTM C 158 : 2002 : R2007 | Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture) |
| ASTM D 4275 : 2017 : REDLINE | Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography |
| ASTM F 3160 : 2016 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| ASTM D 5085 : 2002 : R2013 | Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
| ASTM C 1328/C1328M : 2012 : REDLINE | SPECIFICATION FOR PLASTIC (STUCCO) CEMENT |
| ASTM C 1674 : 2016 : REDLINE | Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures |
| ASTM D 5085 : 2002 | Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
| ASTM C 861 : 1993 : R2005 | Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes |
| ASTM C 1624 : 2005 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
| ASTM D 6780/D6780M : 2012 : REDLINE | Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR) |
| ASTM D 3094 : 2000 : R2005 | Standard Test Method for Seepage Rate of Aerosol Products |
| ASTM C 1470 : 2006 : R2013 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
| ASTM D 3631 : 1999 : R2004 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| FM 1612 : 2016 | POLYVINYL CHLORIDE (PVC) PIPE AND FITTING FOR UNDERGROUND FIRE PROTECTION SERVICE |
| ASTM D 7589 : 2016 : REDLINE | Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine<rangeref></rangeref > |
| ASTM D 6780 : 2005 | Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR) |
| ASTM E 1733 : 1995 : R2014 | Standard Guide for Use of Lighting in Laboratory Testing |
| ASTM C 1863 : 2018 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization |
| ASTM E 1399/E1399M : 1997 : R2017 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM F 1813 : 2013 : REDLINE | Standard Specification for Wrought Titanium<span class='unicode'>–</span>12 Molybdenum<span class='unicode'>–</span>6 Zirconium<span class='unicode'>–</span>2 Iron Alloy for Surgical Implant (UNS R58120) |
| ASTM C 1291 : 2018 : REDLINE | Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics |
| ASTM D 5156 : 2002 | Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption) |
| ASTM D 6254/D6254M : 2013 : REDLINE | Standard Specification for Wirebound Pallet-Type Wood Boxes |
| ASTM D 5021 : 2000 | Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007) |
| ASTM E 1434 : 2000 : R2006 | Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases |
| IEC 62529:2012 | Standard for Signal and Test Definition |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| NSF 4 : 2016 | COMMERCIAL COOKING, RETHERMALIZATION, AND POWERED HOT FOOD HOLDING AND TRANSPORTATION EQUIPMENT |
| CSA 6.25 : 2005 : INC : ADD A : 2007 : R2015 | CYLINDER CONNECTION DEVICES |
| ASTM E 1192 : 1997 : R2003 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
| ASTM E 2988 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics |
| FM 5700 : 2018 | EXPLOSION SUPPRESSION SYSTEMS |
| FM 2151 : 2015 | HOSE HOUSES AND OUTDOOR HOSE CABINETS |
| FM 1034 : 2013 | AIR DRYING UNITS |
| ASTM D 4473 : 2008 | Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior |
| FM 3990 : 2018 | LESS OR NONFLAMMABLE LIQUID-INSULATED TRANSFORMERS |
| 17/30361445 DC : DRAFT SEP 2017 | BS ISO 12108 - METALLIC MATERIALS - FATIGUE TESTING - FATIGUE CRACK GROWTH METHOD |
| FM 1042 : 2016 | VANE-TYPE WATERFLOW ALARM INDICATORS |
| FM 1613 : 2017 | POLYETHYLENE (PE) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE |
| ASTM D 6867 : 2003 : R2009 | Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing |
| FM 2111,2131 : 2014 | FIRE HOSE ASSEMBLIES AND FIRE HOSE COUPLINGS |
| ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
| ASTM C 1368 : 2018 : REDLINE | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature |
| NSF 25 : 2017 | VENDING MACHINES FOR FOOD BEVERAGES |
| ASTM E 1193:1997 | Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests |
| IEEE 384-2008 REDLINE | IEEE Standard Criteria for Independence of Class 1E Equipment and Circuits |
| IEEE 270-2006 | IEEE Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI) |
| API MPM CH15 : 2001 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 15: GUIDELINES FOR THE USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI) IN THE PETROLEUM AND ALLIED INDUSTRIES |
| API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| NSF 51 : 2014 | FOOD EQUIPMENT MATERIALS |
| ASTM D 1914 : 1995 : R2004 : EDT 1 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
| MIL-C-42066 Revision A:2000 | CARRIER, LITTER, WHEELED |
| NSF 35 : 2017 | HIGH PRESSURE DECORATIVE LAMINATES FOR SURFACING FOOD SERVICE EQUIPMENT |
| IEEE 1293-1998 | IEEE Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Non-Gyroscopic Accelerometers |
| ASTM D 346/D346M : 2011 : REDLINE | Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis |
| ASTM D 6457 : 2008 | Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) |
| ASTM D 3294 : 2015 : REDLINE | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes |
| NACE SP 03 95 : 2013 | FUSION-BONDED EPOXY COATING OF STEEL REINFORCING BARS |
| ASTM E 2574/E2574M : 2017 : REDLINE | Standard Test Method for Fire Testing of School Bus Seat Assemblies |
| ASTM D 4591 : 2017 : REDLINE | Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry |
| ASTM D 3307 : 2016 : REDLINE | Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
| CSA 6.8 : 2005 | PILOT GAS FILTERS |
| FM 2141 : 2015 | HOSE RACKS AND REELS |
| FM 1631 : 2006 | ADJUSTABLE AND FIXED SPRINKLER FITTINGS 1/2 INCH THROUGH 1 INCH NOMINAL SIZE |
| MIL-STD-962 Revision D:2003 | DEFENSE STANDARDS FORMAT AND CONTENT |
| NISO Z39.18 : 1995 | SCIENTIFIC AND TECHNICAL REPORTS - PREPARATION, PRESENTATION, AND PRESERVATION |
| BS ISO 13837:2008 | Road vehicles. Safety glazing materials. Method for the determination of solar transmittance |
| ASTM D 5575 : 2007 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| FM 2311 : 2008 | VACUUM AND PRESSURE GAUGES FOR FIRE PROTECTION SYSTEMS |
| AWS C2.23M/C2.23 : 2003 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
| ASTM C 1361 : 2010 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures |
| CSA 6.23 : 2005 : R2015 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
| CSA/ANSI Z21.80:2011 | LINE PRESSURE REGULATORS |
| CSA 6.3 : 2007 : INC : ADD B : 2012 : R2016 | GAS APPLIANCES PRESSURE REGULATORS |
| MIL-STD-961 Revision E:2003 | DEFENSE AND PROGRAM-UNIQUE SPECIFICATIONS FORMAT AND CONTENT |
| A-A-55137 Revision A:2017 | SAW, JIG, WOODWORKING |
| ASTM D 1739 : 1998 : R2010 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| ASTM E 1611 : 2000 | Standard Guide for Conducting Sediment Toxicity Tests with Marine and Estuarine Polychaetous Annelids |
| CSA/ANSI Z83.19-2017/CSA 2.35-2017 | Gas-fired high-intensity infrared heaters |
| CSA A440 : 2017 | NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS |
| FM 1636 : 2003 | FIRE RESISTANT BARRIERS FOR USE WITH CPVC PIPE AND FITTINGS IN LIGHT HAZARD OCCUPANCIES |
| ASTM C 1525 : 2004 : R2013 | Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching |
| CSA 6.3 : 2007 : INC : ADD A : 2010 : R2012 | GAS APPLIANCES PRESSURE REGULATORS |
| CSA 6.3 : 2007 : INC : ADD B : 2012 | GAS APPLIANCES PRESSURE REGULATORS |
| ANSI Z21.47 : 2016 | GAS-FIRED CENTRAL FURNACES |
| FM 1319 : 2018 | CENTRIFUGAL FIRE PUMPS (HORIZONTAL, END SUCTION TYPE) |
| ASTM D 3594 : 1993 : R2013 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers (Withdrawn 2019) |
| ASTM C 158 : 2002 | Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture) |
| ASTM C 1401 : 2014 : REDLINE | Standard Guide for Structural Sealant Glazing |
| ASTM D 7301 : 2011 | Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| FM 1364 : 2013 | EXPANSION CHAMBERS |
| ASTM E 1192 : 1997 : R2008 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
| ASTM F 221 : 1998 : R2009 | Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom (Withdrawn 2015) |
| FM 1336 : 2011 | FLEXIBLE FIRE PUMP COUPLINGS AND FLEXIBLE CONNECTING SHAFTS FOR FIRE PROTECTION SERVICE |
| ASTM C 1275 : 2018 : REDLINE | Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature |
| API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| IEEE 260.1 : 2004 | LETTER SYMBOLS FOR UNITS OF MEASUREMENT (SI UNITS, CUSTOMARY INCH-POUND UNITS, AND CERTAIN OTHER UNITS) |
| IEEE 1076.1.1-2011 | IEEE Standard for VHDL Analog and Mixed-Signal Extensions -- Packages for Multiple Energy Domain Support |
| IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| IEEE 1560-2005 | IEEE Standard for Methods of Measurement of Radio Frequency Power Line Interference Filter in the Range of 100 Hz to 10 GHz |
| ASTM D 4800 : 1994 : R2011 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 7293 : 2012 : REDLINE | Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) |
| ISA 77.44.01 : 2007 | FOSSIL FUEL POWER PLANT - STEAM TEMPERATURE CONTROLS |
| SAE ARP1270B | Aircraft Cabin Pressurization Criteria |
| FM 1041 : 2006 | ALARM CHECK VALVES |
| ASTM E 1733 : 1995 : R2008 | Standard Guide for Use of Lighting in Laboratory Testing |
| ASTM F 2779 : 2010 | Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface |
| ASTM D 7115 : 2010 : R2015 | Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
| ASTM C 1323 : 2016 : REDLINE | Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature |
| NFPA T3.5.14 : 2009 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
| NFPA T3.19.18 : 2009 : R2014 | FLUID POWER - SEALING DEVICES - GROOVE DIMENSIONS FOR RADIAL COMPRESSION TYPE PISTON RINGS |
| CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| CSA NGV 6.1 : 2016 | COMPRESSED NATURAL GAS (CNG) FUEL STORAGE AND DELIVERY SYSTEMS FOR ROAD VEHICLES |
| ANSI Z21.24 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| ASTM D 5014 : 1994 : R2000 : EDT 1 | Standard Test Method for Measurement of Formaldehyde in Indoor Air (Passive Sampler Methodology) (Withdrawn 2006) |
| ASTM D 6880/D6880M : 2011 : REDLINE | Standard Specification for Wood Boxes |
| ASTM D 2238 : 1992 : R2012 : EDT 1 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm<sup>−1</sup> (Withdrawn 2021) |
| ASTM E 1688 : 2010 : R2016 | Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates |
| ASTM C 158 : 2002 : R2012 | Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture) |
| ASTM D 245 : 2006 : R2011 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
| ASTM D 5086 : 2001 : R2013 | Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
| ASTM D 8133 : 2017 | Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry |
| ASTM D 1430 : 2017 : REDLINE | Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
| ASTM F 2066 : 2018 : REDLINE | Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| ASTM D 2260 : 2003 : R2009 | Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems |
| ASTM F 1350 : 2015 : REDLINE | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
| ASTM D 1710 : 2015 : REDLINE | Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
| ASTM E 1391 : 2003 : R2008 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates |
| ASTM D 3631 : 1999 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM D 6330 : 1998 : R2003 | Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
| ASTM E 1192 : 1997 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
| ASTM D 5502 : 2000 : R2015 | Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
| ASTM F 1251 : 1989 : R2003 | Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices (Withdrawn 2012) |
| ASTM F 2321 : 2014 : REDLINE | Standard Specification for Flexible and Rigid Insulated Temporary By-Pass Jumpers |
| ASTM C 1470 : 2006 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
| ASTM C 1834 : 2016 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures |
| ASTM D 6202 : 2002 | Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine (Withdrawn 2009) |
| ASTM E 1822 : 2017 : REDLINE | Standard Test Method for Fire Testing of Stacked Chairs |
| ASTM F 621 : 2012 : R2017 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| ASTM E 1309 : 2000 : R2011 | Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases (Withdrawn 2015) |
| ASTM D 4438 : 2013 | Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting |
| ASTM D 6984 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE IIIF, SPARK-IGNITION ENGINE |
| ASTM D 3222 : 2005 : R2010 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
| ASTM D 7219 : 2008 | Standard Specification for Isotropic and Near-isotropic Nuclear Graphites |
| ASTM D 7779 : 2011 : R2015 | Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature |
| ASTM F 67 : 2013 : R2017 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| ASTM E 1022 : 1994 : R2007 | Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks |
| ASTM E 1295 : 2001 : R2013 | Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with <emph type="ital">Ceriodaphnia dubia</emph><emph type="bold"> |
| ASTM E 1847 : 1996 : R2008 | Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines |
| ASTM D 6251/D6251M : 2011 : REDLINE | Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
| GEIA OP 0002 : 2002 | STYLE MANUAL FOR STANDARDS AND OTHER PUBLICATIONS OF TECHAMERICA |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| ASTM D 7993 : 2015 | Standard Guide for Analyzing Complex Phthalates |
| ASTM E 1309 : 2000 : R2005 | Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases |
| ASTM D 4800 : 1994 : R2015 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM E 1399 : 1997 : R2000 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM E 2122 : 2002 : R2007 | Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves |
| ASTM C 1292 : 2016 : REDLINE | Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM G 3 : 2014 | Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing |
| ASTM D 5757:2011 | Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets |
| ASTM E 2455 : 2006 : R2013 | Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels (Withdrawn 2022) |
| ASTM E 1525 : 2002 : R2014 | Standard Guide for Designing Biological Tests with Sediments |
| ASTM D 3684 : 1994 : R2000 | Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method |
| ASTM C 1068 : 2015 : REDLINE | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
| ASTM D 6256/D6256M : 2016 : REDLINE | Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases |
| ASTM C 861 : 1993 : R2010 | Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes |
| ASTM C 1366 : 2004 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
| ASTM B 966 : 2010 | Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas (Withdrawn 2015) |
| ASTM C 91/C91M : 2012-05 | SPECIFICATION FOR MASONRY CEMENT |
| ASTM D 4826 : 1988 : R2007 | Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard (Withdrawn 2010) |
| ASTM F 621 : 2012 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| ASTM D 5815 : 1995 : R2001 : EDT 1 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC) (Withdrawn 2009) |
| ASTM C 1472 : 2016 : REDLINE | Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width |
| ASTM D 6330 : 1998 : R2008 | Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
| ASTM D 6474 : 2012 : REDLINE | Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography |
| NSF 8 : 2017 | COMMERCIAL POWERED FOOD PREPARATION EQUIPMENT |
| CSA 3.8 : 2014 | GAS-FIRED EQUIPMENT FOR DRYING FARM CROPS |
| NFPA 804 : 2020 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| BS EN ISO 13533:2002 | Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
| EN 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
| I.S. EN ISO 13533:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
| NSF 59 : 2017 | MOBILE FOOD CARTS |
| ASME B89.1.13 : 2013 | Micrometers |
| NFPA T2.24.2 : 2007 | HYDRAULIC FLUID POWER SYSTEMS - METHODS FOR PREVENTING EXTERNAL LEAKAGE |
| NFPA T3.5.30 : 2008 : (R2018) | HYDRAULIC FLUID POWER - SOLENOID OPERATED DIRECTIONAL CONTROL VALVES - MEASUREMENT OF RESPONSE TIME |
| NFPA T3.5.24 : 2001 : R2016 | HYDRAULIC FLUID POWER - PRESSURE RELIEF VALVES - METHOD OF TESTING AND PRESENTING BASIC PERFORMANCE DATA |
| ASME Y14.41 : 2012 | DIGITAL PRODUCT DEFINITION DATA PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| NFPA T2.12.11.2 : 2007 : R2012 | HYDRAULIC FLUID POWER COMPONENTS - ASSESSMENT OF RELIABILITY BY TESTING |
| NFPA T3.5.24 : 2001 : R2011 | HYDRAULIC FLUID POWER - PRESSURE RELIEF VALVES - METHOD OF TESTING AND PRESENTING BASIC PERFORMANCE DATA |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| CSA/ANSI NGV3.1 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| NFPA T3.5.24 : 2001 : R2006 | HYDRAULIC FLUID POWER - PRESSURE RELIEF VALVES - METHOD OF TESTING AND PRESENTING BASIC PERFORMANCE DATA |
| NFPA T3.5.29 : 2007 : R2012 | FLUID POWER SYSTEMS AND COMPONENTS - ELECTRICALLY-CONTROLLED INDUSTRIAL VALVES - INTERFACE DIMENSIONS FOR ELECTRICAL CONNECTORS |
| CSA/ANSI Z83.18 : 2017 | RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS |
| ASTM D 4361 : 2010 : REDLINE | TEST METHOD FOR DETERMINING LOGARITHMIC VISCOSITY NUMBER OF POLY (VINYL CHLORIDE) (PVC) IN FORMULATED COMPOUNDS |
| ASME A18.1 : 2017 | SAFETY STANDARD FOR PLATFORM LIFTS AND STAIRWAY CHAIRLIFTS |
| CSA/ANSI NGV 5.2-2017 | Vehicle fueling appliances (VFA) |
| CSA/ANSI Z21.21 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| CSA/ANSI Z21.41 : 2014 | QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES |
| NFPA T2.13.14 : 2007 : R2012 | RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - USE OF ENVIRONMENTALLY ACCEPTABLE FLUIDS |
| NFPA T2.13.14 : 2007 | RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - USE OF ENVIRONMENTALLY ACCEPTABLE FLUIDS |
| NFPA T2.12.11.2:2007 | HYDRAULIC FLUID POWER COMPONENTS - ASSESSMENT OF RELIABILITY BY TESTING |
| FM 1044 : 2012 | FIRE SERVICE METERS |
| NFPA T2.24.2 : 2007 : R2012 | HYDRAULIC FLUID POWER SYSTEMS - METHODS FOR PREVENTING EXTERNAL LEAKAGE |
| NFPA T3.5.29 : 2007 | FLUID POWER SYSTEMS AND COMPONENTS - ELECTRICALLY-CONTROLLED INDUSTRIAL VALVES - INTERFACE DIMENSIONS FOR ELECTRICAL CONNECTORS |
| SSPC-CS 23.00 : 2016 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
| CSA/ANSI Z21.50 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.