ISO 48:2010
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
12-09-2018
Superseded by
Language(s)
French, English, Russian
Published date
03-09-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 48:2010 specifies four methods for the determination of the hardness of vulcanized or thermoplastic rubbers on flat surfaces (standard-hardness methods) and four methods for the determination of the apparent hardness of curved surfaces (apparent-hardness methods). The hardness is expressed in international rubber hardness degrees (IRHD). The methods cover the hardness range from 10 IRHD to 100 IRHD.
These methods differ primarily in the diameter of the indenting ball and the magnitude of the indenting force, these being chosen to suit the particular application.
ISO 48:2010 does not specify a method for the determination of hardness by a pocket hardness meter, which is described in ISO 76192.
ISO 48:2010 does not specify the determination of the apparent hardness of rubber-covered rollers, which is specified in ISO 7267 (all parts).
| DevelopmentNote |
Supersedes ISO 1818 and ISO 1400 (04/2001) DRAFT ISO/DIS 48 has been withdrawn by the publisher. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF ISO 48 : 2010 | Identical |
| BIS IS 3400-2 : 2014 | Identical |
| DIN ISO 48:2016-09 | Identical |
| NEN ISO 48 : 2010 | Identical |
| UNI ISO 48 : 2011 | Identical |
| BS ISO 48:2010 | Identical |
| SAC GB/T 6031 : 1998 | Identical |
| DIN 53519-1:1972-05 | Corresponds |
| I.S. ISO 48:1986 | Identical |
| NBN ISO 48 : 2003 | Identical |
| NBN E 48 113 : 1988 | Identical |
| UNE-ISO 48:2008 | Identical |
| DIN 53519-2:1972-05 | Corresponds |
| I.S. EN 13121-3:2016 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| BS 2782-3 Method 365B:1981 | Methods of testing plastics. Mechanical properties Determination of indentation hardness by means of a durometer (Shore hardness) |
| 15/30298328 DC : 0 | BS ISO 18898 - RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS |
| ISO 18898:2016 | Rubber Calibration and verification of hardness testers |
| UNE-EN 50620:2017 | Electric cables - Charging cables for electric vehicles |
| 14/30274206 DC : 0 | BS ISO 3537 - ROAD VEHICLES - SAFETY GLAZING MATERIALS - MECHANICAL TESTS |
| 07/30046996 DC : DRAFT AUG 2007 | BS ISO 1288-4 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 4: TESTING OF CHANNEL SHAPED GLASS |
| DD ENV 13696:2001 | Wood and parquet flooring. Determination of elasticity and resistance to wear |
| BS EN 12274-4:2003 | Slurry surfacing. Test methods Determination of cohesion of the mix |
| 13/30261812 DC : 0 | BS ISO 10555-6 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS |
| ISO 6149-4:2017 | Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| DIN ISO 8536-6:2012-09 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES (ISO 8536-6:2016) |
| 12/30250853 DC : 0 | BS ISO 17357-2 - SHIPS AND MARINE TECHNOLOGY - FLOATING PNEUMATIC RUBBER FENDERS - PART 2: LOW PRESSURE |
| 14/30303794 DC : 0 | BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS ISO 4662:2017 | Rubber, vulcanized or thermoplastic. Determination of rebound resilience |
| PREN 17142 : DRAFT 2017 | MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 10545-4:2014-11 | CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH (ISO 10545-4:2014) |
| PD CEN/TS 12633:2014 | Method of polishing specimens prior to the measurement of slip and skid resistance |
| PREN 438-2 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| NF ISO 188 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS |
| 02/101929 DC : DRAFT FEB 2002 | PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION |
| 07/30160665 DC : 0 | BS EN 12790 - CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
| I.S. EN ISO 3678:1995 | PAINTS AND VARNISHES - PRINT-FREE TEST |
| 05/30125061 DC : DRAFT MAR 2005 | ISO 9974-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER STUD ENDS WITH ISO 261 THREADS WITH ELASTOMER METAL-TO-METAL SEALING - PART 4: DIMENSIONS, METHODS AND REQUIREMENTS FOR EXTERNAL PORT PLUGS |
| I.S. EN ISO 4869-3:2007 | ACOUSTICS - HEARING PROTECTORS - PART 3: MEASUREMENT OF INSERTION LOSS OF EAR-MUFF TYPE PROTECTORS USING AN ACOUSTIC TEST FIXTURE |
| BS ISO 16932:2016 | Glass in building. Destructive-windstorm-resistant security glazing. Test and classification |
| ISO 4925:2005 | Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems |
| 99/123581 DC : DRAFT OCT 1999 | ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS |
| 09/30181563 DC : 0 | BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS |
| 17/30357593 DC : 0 | BS ISO 4666-4 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 4: CONSTANT-STRESS FLEXOMETER |
| UNE-EN ISO 28706-3:2012 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (ISO 28706-3:2008) |
| ISO 16933:2007 | Glass in building — Explosion-resistant security glazing — Test and classification for arena air-blast loading |
| I.S. EN 1437:2002 | PLASTICS PIPING SYSTEMS - PIPING SYSTEMS FOR UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING |
| BS ISO 4925:2005 | Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems |
| 10/30199074 DC : 0 | BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| ISO 19003:2006 | Rubber and rubber products — Guidance on the application of statistics to physical testing |
| BS ISO 24453:2008 | Rubber. Acquisition and presentation of comparable single-point data |
| CSA Z323.4.9 : 0 | WHEELCHAIRS - DETERMINATION OF COEFFICIENT OF FRICTION OF TEST SURFACES |
| I.S. EN 14483-4:2004 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL |
| 05/30106298 DC : DRAFT JAN 2005 | ISO 8980-4 - OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 4: SPECIFICATIONS AND TEST METHODS FOR ANTIREFLECTIVE COATINGS |
| ISO 11040-5:2012 | Prefilled syringes — Part 5: Plunger stoppers for injectables |
| ISO/TS 29584:2012 | Glass in building — Pendulum impact testing and classification of safety glass for use in buildings |
| DIN ISO 27588:2014-12 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE (ISO 27588:2012) |
| DIN 53150:2002-09 | PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD) |
| 11/30251982 DC : 0 | BS EN 12697-49 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
| BS ISO 11040-5:2012 | Prefilled syringes Plunger stoppers for injectables |
| NF EN 50508 : 2009 | MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS |
| BS 3558-1:1997 | Glossary of rubber terms International terms |
| 04/30124224 DC : DRAFT OCT 2004 | ISO/DIS 16932 - GLASS IN BUILDING - DESTRUCTIVE-WINDSTORM-RESISTANT SECURITY GLAZING - TEST AND CLASSIFICATION |
| UNE-EN 15129:2011 | Anti-seismic devices |
| 07/30164021 DC : 0 | BS ISO 27588 - RUBBER, VULCANIZED OR THERMOSET - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE |
| BS EN ISO 9117-6:2012 | Paints and varnishes. Drying tests Print-free test |
| DIN EN ISO 9117-1:2009-10 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
| BS 903-A57:1989 | Physical testing of rubber Determination of indentation hardness by means of pocket hardness meters |
| DIN EN ISO 12945-3:2014-10 | Textiles - Determination of the fabric propensity to surface pilling, fuzzing or matting - Part 3: Random tumble pilling method (ISO 12945-3:2014) |
| BS ISO 1817:2015 | Rubber, vulcanized or thermoplastic. Determination of the effect of liquids |
| XP CEN/TS 15901-7 : 2011 XP | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 7: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE USING A DEVICE WITH LONGITUDINAL FIXED SLIP RATIO (LFCG): THE GRIPTESTER |
| 09/30185894 DC : 0 | BS EN 1344 - CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| XP PREN 3747 : 1995 XP | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| 08/30172620 DC : DRAFT OCT 2008 | BS EN ISO 8536-6 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES |
| 08/30185875 DC : 0 | BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| I.S. EN ISO 4007:2012 | PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY (ISO 4007:2012) |
| DIN EN 1339:2003-08 | CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS |
| DIN ISO 6149-3:1996-11 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| 98/714983 DC : DRAFT SEP 1998 | ISO/CD 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 4: EXTERNAL HEX AND INTERNAL HEX PORT PLUGS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| 03/101907 DC : DRAFT AUG 2003 | EN 14727 - LABORATORY FURNITURE - STORAGE UNITS FOR LABORATORIES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 10555-6:2017 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015) |
| SAE J1453/1_201205 | Specification for O-Ring Face Seal Connectors: Part 1 - Tube Connection Details and Common Requirements for Performance and Tests |
| I.S. EN 16837:2018 | SURFACES FOR SPORTS AREAS - DETERMINATION OF LINEAR SHOE/SURFACE FRICTION |
| 00/560662 DC : DRAFT JAN 2000 | PREN 13832 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS |
| I.S. EN 16230-1:2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| 08/30184292 DC : DRAFT SEP 2008 | BS EN 12561-7 - RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS |
| 17/30354090 DC : 0 | BS EN 1081 - RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE |
| 13/30276381 DC : 0 | BS ISO 3601-5 - FLUID POWER SYSTEMS - O-RINGS - PART 5: SPECIFICATION OF ELASTOMERIC MATERIALS FOR INDUSTRIAL APPLICATIONS |
| BS F 152:2006 | Properties of silicone rubber sheet, mouldings and extrusions (general purpose). Specification |
| DD CEN/TS 15676 : DRAFT DEC 2007 | WOOD FLOORING - SLIP RESISTANCE - PENDULUM TEST |
| BS ISO 11040-3:2012 | Prefilled syringes Seals for dental local anaesthetic cartridges |
| DIN ISO 13226:2015-12 | Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011) |
| 05/30032019 DC : DRAFT SEP 2005 | ISO 6194-1 - ROTARY SHAFT LIP TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| BS 7825-3.6:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Dimensional properties |
| 10/30234616 DC : 0 | BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| UNE-EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
| 10/30234628 DC : 0 | BS EN 14420-6 - HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
| BS ISO 12046:2012 | Synchronous belt drives. Automotive belts. Determination of physical properties |
| BS 903-A63:1995 | Physical testing of rubber Method for determination of crystallization effects by hardness measurements |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| 10/30234333 DC : DRAFT DEC 2010 | BS EN 12561-7 - RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS |
| 98/714984 DC : DRAFT SEP 1998 | ISO/CD 8434-3 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL FITTINGS |
| PREN 12274-5 : DRAFT 2016 | SLURRY SURFACING - TEST METHOD - PART 5: DETERMINATION OF THE MINIMUM BINDER CONTENT AND WEARING RESISTANCE |
| CEI EN 61823 : 2005 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - AGL SERIES TRANSFORMERS |
| 09/30198143 DC : 0 | BS ISO 13268 - THERMOPLASTICS PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS |
| DIN EN ISO 28706-4:2016-07 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL (ISO 28706-4:2016) |
| BS ISO 18898:2016 | Rubber. Calibration and verification of hardness testers |
| 11/30245760 DC : 0 | BS EN 13541 - GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST EXPLOSION PRESSURE |
| BS ISO 24454:2008 | Rubber. Acquisition and presentation of comparable multi-point data |
| 05/30130019 DC : DRAFT JULY 2005 | BS F 154 - PROPERTIES OF FLUOROSILICONE RUBBER SHEET, MOULDINGS AND EXTRUSIONS - SPECIFICATION |
| XP ENV 1519-2 : 2003 XP | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS ISO 4927:2005 | Road vehicles. Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120°C max.) |
| 99/104927 DC : DRAFT JUN 1999 | PREN 13618 - WATER SUPPLY, FLEXIBLE HOSES (METALLIC AND ELASTOMERIC MATERIALS) - SPECIFICATION AND TEST METHODS |
| BS ISO 9631:2018 | Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material |
| 99/108002 DC : DRAFT OCT 99 | PREN 12600 - GLASS IN BUILDING - PENDULUM TEST - IMPACT TEST METHOD FOR FLAT GLASS AND PERFORMANCE REQUIREMENTS (SECOND ENQUIRY) |
| 09/30179627 DC : 0 | BS ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY |
| 00/715333 DC : 0 | ISO/CD 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| DD ENV 581-2:2000 | Mechanical safety requirements and test methods for seatingOutdoor furniture. Seating and tables for camping, domestic and contract use |
| UNI ISO 5636-5 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
| EN 15129:2018 | Anti-seismic devices |
| 04/30124232 DC : DRAFT OCT 2004 | ISO/DIS 16935 - GLASS IN BUILDING - BULLET RESISTANT SECURITY GLAZING - TEST AND CLASSIFICATION |
| BS F 156:2006 | Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification |
| BS ISO 9911:2006 | Agricultural irrigation equipment. Manually operated small plastics valves |
| UNI EN ISO 23936-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| CEI EN 60544-2 : 2013 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST |
| BS EN 61518:2001 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) |
| BS EN 15566:2016 | Railway applications. Railway rolling stock. Draw gear and screw coupling |
| BS EN ISO 18082 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - DIMENSIONS OF NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES (ISO 18082:2014) |
| I.S. EN ISO 10545-4:2014 | CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH (ISO 10545-4:2014) |
| PREN 3747 : 200P1 | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| BS ISO 13226:2011 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| ISO 7076-3:2016 | Fire protection Foam fire extinguishing systems Part 3: Medium expansion foam equipment |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| PREN 13541 : DRAFT 2011 | GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST EXPLOSION PRESSURE |
| S.R. CEN TS 15901-13:2011 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 13: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF A SIDEWAY FORCE COEFFICIENT (SFCO): THE ODOLIOGRAPH |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| PREN 1081 : DRAFT 2017 | RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE |
| 17/30328799 DC : 0 | BS EN 549 - RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
| I.S. EN 50620:2017 | ELECTRIC CABLES - CHARGING CABLES FOR ELECTRIC VEHICLES |
| BS EN 16230-1 : 2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| I.S. EN ISO 13260:2011 | THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING (ISO 13260:2010) |
| CEI EN 50508 : 2009 | MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS |
| ISO 5636-5:2013 | Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method |
| ISO 5794-2:2014 | Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation procedures in styrene-butadiene rubber |
| NF ISO 13226 : 2011 | RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
| ISO 27588:2012 | Rubber, vulcanized or thermoplastic Determination of dead-load hardness using the very low rubber hardness (VLRH) scale |
| UNI EN ISO 12311 : 2013 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR |
| UNE-IEC 60092-360:2015 | Electrical installations in ships - Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables |
| BS ISO 3601-1:2012 | Fluid power systems. O-rings Inside diameters, cross-sections, tolerances and designation codes |
| PREN 15834 : DRAFT 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| UNI CEN/TS 12633 : 2014 | METHOD OF POLISHING SPECIMENS PRIOR TO THE MEASUREMENT OF SLIP AND SKID RESISTANCE |
| XP ENV 1566-2 : 2003 XP | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| BS 3734-1:1997 | Rubber. Tolerances for products Dimensional tolerances |
| BS ISO 13926-3:2012 | Pen systems Seals for pen-injectors for medical use |
| BS EN 13832-3:2006 | Footwear protecting against chemicals Requirements for footwear highly resistant to chemicals under laboratory conditions |
| 17/30359554 DC : 0 | BS EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS |
| DIN EN ISO 10555-6:2017-11 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015) |
| DIN EN 15129:2010-06 | ANTI-SEISMIC DEVICES |
| NF EN 12274-4 : 2003 | SLURRY SURFACING - TEST METHOD - PART 4: DETERMINATION OF COHESION OF THE MIX |
| PREN 12697-22 : DRAFT 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
| NF EN 60512-7-1 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED) |
| UNE-EN ISO 12945-3:2014 | Textiles - Determination of the fabric propensity to surface pilling, fuzzing or matting - Part 3: Random tumble pilling method (ISO 12945-3:2014) |
| CEN/TS 12697-50:2016 | Bituminous mixtures - Test methods - Part 50: Resistance to scuffing |
| I.S. HD 605:2008 | ELECTRIC CABLES - ADDITIONAL TEST METHODS |
| ISO 16932:2016 | Glass in building — Destructive-windstorm-resistant security glazing — Test and classification |
| I.S. EN 13071-1:2008 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| ASTM D 1415 : 2006 : R2012 | Standard Test Method for Rubber Property—International Hardness |
| ISO 9211-4:2012 | Optics and photonics Optical coatings Part 4: Specific test methods |
| I.S. EN 14382:2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| EN 476:2011 | General requirements for components used in drains and sewers |
| DIN EN 14241-1:2013-11 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| DIN EN ISO 5470-1:2015-04 (Draft) | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| DIN EN 12561-7:2011-10 | Railway applications - Tank wagons - Part 7: Platforms and ladders |
| DIN EN 13748-2:2005-03 | Terrazzo tiles - Part 2: Terrazzo tiles for external use; German version EN 13748-2:2004 |
| BS EN 377:1993 | Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes |
| BS EN ISO 8871-1:2004 | Elastomeric parts for parenterals and for devices for pharmaceutical use Extractables in aqueous autoclavates |
| BS EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates Determination of the polished stone value |
| BS EN 12697-38:2004 | Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration |
| BS EN 3747:2007 | Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification |
| EN 12697-22:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking |
| BS EN 1130-2:1996 | Furniture. Cribs and cradles for domestic use Test methods |
| DIN EN 14982:2011-01 | Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (includes Amendment A1:2010) |
| BS EN 681-2:2000 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers |
| IEC 61230:2008 | Live working - Portable equipment for earthing or earthing and short-circuiting |
| UNE-EN 476:2011 | General requirements for components used in drains and sewers |
| BS EN ISO 8434-4:2000 | Metallic tube connections for fluid power and general use 24° cone connectors with O-ring weld-on nipples |
| BS EN 14241-1:2013 | Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods Seals in flue liners |
| BS EN 14382 : 2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 1338:2003 | Concrete paving blocks. Requirements and test methods |
| BS EN ISO 868:2003 | Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness) |
| BS EN 527-3:2003 | Office furniture. Work tables and desks Methods of test for the determination of the stability and the mechanical strength of the structure |
| BS EN 1339:2003 | Concrete paving flags. Requirements and test methods |
| BS EN 681-1:1996 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
| BS EN 1437:2002 | Plastics piping systems. Piping systems for underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading |
| BS EN 12227-2:1999 | Playpens for domestic use Test methods |
| BS EN 13597:2003 | Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs |
| BS EN ISO 4869-3:2007 | Acoustics. Hearing protectors Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture |
| BS EN 1340:2003 | Concrete kerb units. Requirements and test methods |
| UNI EN ISO 8871-2 : 2014 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION |
| DIN ISO 8536-6:2017-09 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES (ISO 8536-6:2016) |
| DIN EN 14483-2:2004-09 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS |
| I.S. EN 15330-1:2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| DIN EN 13787:2002-04 | ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| EN 13541:2012 | Glass in building - Security glazing - Testing and classification of resistance against explosion pressure |
| EN 61823:2003 | Electrical installations for lighting and beaconing of aerodromes - AGL series transformers |
| EN 1288-5:2000 | Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas |
| EN 1288-2:2000 | Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas |
| CEN/TS 15901-4:2009 | Road and airfield surface characteristics - Part 4: Procedure for determining the skid resistance of pavements using a device with longitudinal controlled slip (LFCT): Tatra Runway Tester (TRT) |
| EN ISO 19879:2010 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
| EN 1130-2:1996 | Furniture - Cribs and cradles for domestic use - Part 2: Test methods |
| CEN/TS 15901-13:2011 | Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph |
| EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
| EN 12561-7:2011 | Railway applications - Tank wagons - Part 7: Platforms and ladders |
| EN 1288-4:2000 | Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass |
| EN 1153:1995/AC:1996 | KITCHEN FURNITURE - SAFETY REQUIREMENTS AND TEST METHODS FOR BUILT-IN AND FREE STANDING KITCHEN CABINETS AND WORK TOPS |
| EN 1051-1:2003 | Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description |
| CEN/TS 15676:2007 | Wood flooring - Slip resistance - Pendulum test |
| CEN/TS 12633:2014 | Method of polishing specimens prior to the measurement of slip and skid resistance |
| DIN EN ISO 5470-1:2017-04 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| DIN EN ISO 8434-1:2008-02 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| EN 13071 : 2002 | SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE |
| EN 1437:2002 | Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading |
| EN 12503-6:2001 | Sports mats - Part 6: Determination of the top friction |
| EN 12790:2009 | Child use and care articles - Reclined cradles |
| EN 61230:2008 | LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING |
| EN 13121-3:2016 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| CEN/TS 15901-6:2009 | Road and airfield surface characteristics - Part 6: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM® |
| EN 1288-3:2000 | Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending) |
| EN 12274-4:2018 | Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix |
| EN 50014:1997/A2:1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| EN 13213:2001 | Hollow floors |
| DIN EN 15551:2011-01 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| EN 13036-4:2011 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
| ONORM EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| ENV 1566-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly (vinyl chloride) (PVC-C) - Part 2: Guidance for the assessment of conformity |
| NF EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| DEFSTAN 93-55/3(2009) : 2009 | BUTYL RUBBER, TYPE NBC |
| ENV 1565-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity |
| ENV 1455-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity |
| ENV 1451-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity |
| ENV 1519-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building stucture - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity |
| ONORM EN 14982 : 2010 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS |
| BS 903-A19(1998) : 1998 | RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS |
| ONORM EN 12790 : 2009 | CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
| ASME BPE : 2016 | BIOPROCESSING EQUIPMENT |
| DIN ISO 6149-2:1996-11 | PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| NF ISO 15082 : 2000 | ROAD VEHICLES - TESTS FOR RIGID PLASTIC SAFETY GLAZING MATERIALS |
| 14/30288717 DC : DRAFT JAN 2014 | BS EN ISO 1288-5 - GLASS IN BUIDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 5: COAXIAL DOUBLE-RING TEST ON FLAT SPECIMENS WITH SMALL TEST SURFACE AREAS |
| BS ISO 4639-2:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxygenated fuels |
| BS ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures |
| BS F 164:2006 | Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from fluorosilicone rubber material released to BS F 154. Specification |
| 11/30212455 DC : 0 | BS ISO 3387 - RUBBER - DETERMINATION OF CRYSTALLIZATION EFFECTS BY HARDNESS MEASUREMENTS |
| 03/308001 DC : DRAFT JUNE 2003 | ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS |
| 10/30218554 DC : 0 | BS ISO 13926-3 - PEN SYSTEMS - PART 3: SEALS FOR PEN-INJECTORS FOR MEDICAL USE |
| 16/30314847 DC : 0 | BS EN ISO 28706-3 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL OR A TETRAGONAL GLASS BOTTLE |
| BS ISO 6149-3:1993 | Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Light-duty (L series) stud ends. Dimensions, design, test methods and requirements |
| UNE-EN ISO 28706-2:2017 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017) |
| ISO 3387:2012 | Rubber Determination of crystallization effects by hardness measurements |
| UNE-EN ISO 9117-6:2013 | Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012) |
| S.R. CEN TS 15901-6:2009 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 6: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY FORCE COEFFICIENT (SFCS): SCRIM(R) |
| 07/30144370 DC : 0 | BS ISO 3601-1 - FLUID POWER SYSTEMS - O-RINGS - PART 1: INSIDE DIAMETERS, CROSS-SECTIONS, TOLERANCES AND DESIGNATION CODES |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| BS EN 16084:2011 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| BS ISO 13260 : 2010 | THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING |
| I.S. EN ISO 9117-5:2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST (ISO 9117-5:2012) |
| XP CEN/TS 15901-4 : 2011 XP | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 4: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF PAVEMENTS USING A DEVICE WITH LONGITUDINAL CONTROLLED SLIP (LFCT): TATRA RUNWAY TESTER (TRT) |
| 12/30196194 DC : 0 | BS ISO 5636-5 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
| 05/30127027 DC : DRAFT JULY 2005 | ISO 6118 - ROAD VEHICLES - ELASTOMERIC CUPS AND SEALS FOR CYLINDERS FOR HYDRAULIC BRAKING SYSTEMS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 70 DEGREES C MAX.) |
| 03/300201 DC : DRAFT FEB 2003 | IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| ISO 1288-4:2016 | Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass |
| 16/30334939 DC : 0 | BS ISO 4666-3 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 3: COMPRESSION FLEXOMETER (CONSTANT-STRAIN TYPE) |
| BS ISO 3601-5:2015 | Fluid power systems. O-rings Specification of elastomeric materials for industrial applications |
| BS ISO 6446:1994 | Rubber products. Bridge bearings. Specification for rubber materials |
| BS EN ISO 9117-1:2009 | Paints and varnishes. Drying tests Determination of through-dry state and through-dry time |
| 04/30109416 DC : DRAFT FEB 2004 | ISO 8980-5 - OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 5: MINIMUM REQUIREMENTS FOR SPECTACLE LENS SURFACES CLAIMED TO BE ABRASION-RESISTANT |
| 01/714274 DC : 0 | ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| BS ISO 11040-2:2011 | Prefilled syringes Plunger stoppers for dental local anaesthetic cartridges |
| 16/30290140 DC : 0 | BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| BS 6913-14:1997 | Operation and maintenance of earth-moving machinery Specification for lubrication fittings. Grease-gun nozzles |
| 10/30234631 DC : 0 | BS EN 14420-8 - HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| 07/30169159 DC : 0 | BS ISO 28706-3 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL |
| BS EN ISO 13260 : 2011 | THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING (ISO 13260:2010) |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| PREN 681-1 : DRAFT 2016 | ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| 16/30338439 DC : 0 | BS EN ISO 14903 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| I.S. EN 12274-5:2018 | SLURRY SURFACING - TEST METHOD - PART 5: DETERMINATION OF THE MINIMUM BINDER CONTENT AND WEARING RESISTANCE |
| EN 50620:2017 | Electric cables - Charging cables for electric vehicles |
| 10/30216808 DC : 0 | BS ISO 11040-3 - PREFILLED SYRINGES - PART 3: SEALS FOR DENTAL LOCAL ANAESTHETIC CARTRIDGES |
| ISO 2853:1993 | Stainless steel threaded couplings for the food industry |
| 05/30135789 DC : DRAFT JUL 2005 | EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| BS ISO 8434-6:2009 | Metallic tube connections for fluid power and general use 60° cone connectors with or without O-ring |
| 10/30229700 DC : 0 | BS EN ISO 9117-6 - PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST |
| BS 1344-15:1984 | Methods of testing vitreous enamel finishes Apparatus for testing with alkaline liquids |
| 03/110542 DC : DRAFT JUNE 2003 | ISO 16936-1 - GLASS IN BUILDING - FORCED-ENTRY SECURITY GLAZING - PART 1: TEST AND CLASSIFICATION BY REPETITIVE BALL DROP |
| 14/30287215 DC : 0 | BS ISO 18869 - HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS |
| BS ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic. Determination of indentation hardness Durometer method (Shore hardness) |
| I.S. EN 16084:2011 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| DIN EN 15551:2013-05 (Draft) | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| 11/30232899 DC : 0 | BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76 |
| UNI CEN/TS 15901-13 : 2011 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 13: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF A SIDEWAY FORCE COEFFICIENT (SFCO): THE ODOLIOGRAPH |
| BS EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust General requirements |
| 16/30320756 DC : 0 | BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| BS ISO 6149-4 : 2006 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| DIN ISO 11040-5:2013-12 | PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012) |
| BS EN ISO 4007:2012 | Personal protective equipment. Eye and face protection. Vocabulary |
| HD 605 S2:2008/corrigendum:2010 | ELECTRIC CABLES - ADDITIONAL TEST METHODS |
| UNI EN ISO 12945-3 : 2014 | TEXTILES - DETERMINATION OF THE FABRIC PROPENSITY TO SURFACE PILLING, FUZZING OR MATTING - PART 3: RANDOM TUMBLE PILLING METHOD |
| 14/30301115 DC : 0 | BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
| 17/30334044 DC : 0 | BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS |
| 10/30167702 DC : 0 | BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION |
| UNE-ISO 3387:2013 | Rubber. Determination of crystallization effects by hardness measurements. |
| BS AU 174-2:1985 | Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles Specification for non-petroleum base brake fluid |
| 05/30133342 DC : DRAFT MAY 2005 | ISO 18898 - RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS |
| BS ISO 17357-2:2014 | Ships and marine technology. Floating pneumatic rubber fenders Low pressure |
| 11/30250546 DC : 0 | BS EN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| BS EN 50508:2009 | Multi-purpose insulating sticks for electrical operations on high voltage installations |
| BS DD192(1990) : 1990 | METHOD FOR MEASUREMENT OF INSERTION LOSS OF EAR-MUFF TYPE HEARING PROTECTORS (SIMPLIFIED METHOD FOR QUALITY INSPECTION PURPOSES) |
| 05/30127022 DC : DRAFT AUG 2005 | ISO 4928 - ROAD VEHICLES - ELASTOMERIC CUPS AND SEALS FOR CYLINDERS FOR HYDRAULIC BRAKING SYSTEMS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGREE C MAX.) |
| PREN 549 : DRAFT 2017 | RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
| BS EN 15551:2017 | Railway applications. Railway rolling stock. Buffers |
| 12/30227277 DC : 0 | BS ISO 9211-4 - OPTICS AND OPTICAL INSTRUMENTS - OPTICAL COATINGS - PART 4: SPECIFIC TEST METHODS |
| DD ENV 1451-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity |
| XP ENV 1455-2 : 2003 XP | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS ISO 6356:2012 | Textile and laminate floor coverings. Assessment of static electrical propensity. Walking test |
| BS 1344-14:1984 | Methods of testing vitreous enamel finishes Apparatus for testing with acid and neutral liquids and their vapours |
| S.R. CEN TS 15901-7:2009 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 7: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE USING A DEVICE WITH LONGITUDINAL FIXED SLIP RATIO (LFCG): THE GRIPTESTER(R) |
| I.S. EN 15129:2009 | ANTI-SEISMIC DEVICES |
| 07/30161672 DC : 0 | BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA |
| PREN 14241-1 : DRAFT 2011 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| NF EN ISO 13260 : 2011 AMD 1 2017 | THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING |
| I.S. EN ISO 28706-3:2018 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL OR A TETRAGONAL GLASS BOTTLE (ISO 28706-3:2017) |
| DIN EN 15807:2011-05 | Railway applications - Pneumatic half couplings |
| UNE-ISO 13226:2017 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers. |
| BS ISO 16589-1 : 2011 | ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| DIN EN 16084:2011-07 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| PREN 14420-6 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
| DIN EN 61518:2002-06 | MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA) |
| ISO 4666-3:2016 | Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type) |
| ISO 4639-2:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels |
| I.S. EN 60068-2-31:2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| ISO 4195:2012 | Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods |
| BS ISO 4639-3:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxidized fuels |
| ISO 17357-2:2014 | Ships and marine technology — Floating pneumatic rubber fenders — Part 2: Low pressure |
| ISO 4662:2017 | Rubber, vulcanized or thermoplastic Determination of rebound resilience |
| ISO 13260:2010 | Thermoplastics piping systems for non-pressure underground drainage and sewerage Test method for resistance to combined temperature cycling and external loading |
| S.R. CEN TS 15676:2007 | WOOD FLOORING - SLIP RESISTANCE - PENDULUM TEST |
| SAE J515_201511 | Specification for O-Ring Materials Used with Hydraulic Connectors |
| I.S. EN ISO 9117-6:2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST (ISO 9117-6:2012) |
| I.S. HD 632:2016 | POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 36 KV (U[M] = 42 KV) UP TO 150 KV (U[M] = 170 KV) |
| PREN 1340 : DRAFT 2010 | CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 60544-4:2003 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS |
| I.S. EN ISO 12945-3:2014 | TEXTILES - DETERMINATION OF THE FABRIC PROPENSITY TO SURFACE PILLING, FUZZING OR MATTING - PART 3: RANDOM TUMBLE PILLING METHOD (ISO 12945-3:2014) |
| S.R. CEN/TS 12633:2014 | METHOD OF POLISHING SPECIMENS PRIOR TO THE MEASUREMENT OF SLIP AND SKID RESISTANCE |
| ISO 11040-3:2012 | Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges |
| ISO 9974-4:2016 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| ISO 7175-2:1997 | Children's cots and folding cots for domestic use Part 2: Test methods |
| CEI EN 50620 : 1ED 2017 | ELECTRIC CABLES - CHARGING CABLES FOR ELECTRIC VEHICLES |
| ISO 6119:2006 | Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) |
| PREN 15330-1 : DRAFT 2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| ISO 6448:1985 | Rubber seals Joint rings used for petroleum product supply pipes and fittings Specification for material |
| BS EN 15129:2009 | Anti-seismic devices |
| NF EN 15807 : 2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| UNE-EN ISO 6149-4:2017 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017) |
| 10/30217325 DC : 0 | BS EN 1339 - CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS |
| UNI EN 15129 : 2009 | ANTI-SEISMIC DEVICES |
| DIN EN 13071-1:2008-10 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| IEC 60502-2:2014 RLV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) |
| SAE J518/3_201511 | Hydraulic Flange Clamps, 2-Screw Flange Connection to be used with SAE J518-1 (Code 61) Connections where Only Low Pressure is Required |
| ISO 9911:2006 | Agricultural irrigation equipment Manually operated small plastics valves |
| EN 16837:2018 | Surfaces for sports areas - Determination of linear shoe/surface friction |
| PREN 13036-4 : DRAFT 2009 | METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF SURFACE - PART 4: THE PENDULUM TEST |
| IEC 60840:2011 RLV | Power cables with extruded insulation and their accessories for rated voltages above 30 kV (<em>U</em><sub>m</sub> = 36 kV) up to 150 kV (<em>U</em><sub>m</sub> = 170 kV) - Test methods and requirements |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| ISO 9940:2015 | Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification |
| EN ISO 6149-4:2017 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017) |
| EN ISO 28706-3:2018 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle (ISO 28706-3:2017) |
| IEC 61241-0:2004 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| BS EN ISO 8434-1:2007 | Metallic tube connections for fluid power and general use 24 degree cone connectors |
| ISO 9631:2018 | Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material |
| ISO 4930:2006 | Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.) |
| ISO 15082:2016 | Road vehicles Tests for rigid plastic safety glazing materials |
| ISO 4632-1:1982 | Rubber, vulcanized Classification Part 1: Description of the classification system |
| DIN EN 1063:2000-01 | GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST BULLET ATTACK |
| NF EN 1097-8 : 2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| DIN EN 1344:2015-10 | CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 12697-22:2013-12 (Draft) | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
| DIN EN 3050:1998-07 | AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - TECHNICAL SPECIFICATION |
| DIN EN 12697-38:2004-10 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 |
| DIN EN 1337-3:2005-07 | Structural bearings - Part 3: Elastomeric bearings |
| DIN EN 476:2011-04 | General requirements for components used in drains and sewers |
| DIN EN 13036-4:2011-12 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test; German version EN 13036-4:2011 |
| DIN EN 14354:2005-03 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
| UNE-EN ISO 19879:2010 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
| BS EN 1344:2013 | Clay pavers. Requirements and test methods |
| BS EN 12561-7:2011 | Railway applications. Tank wagons Platforms and ladders |
| DIN EN ISO 8980-5:2005-10 | Ophthalmic optics - Uncut finished spectacle lenses - Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant (ISO 8980-5:2005) |
| BS EN 12272-3:2003 | Surface dressing. Test methods Determination of binder aggregate adhesivity by the Vialit plate shock test method |
| UNE-EN 1344:2015 | Clay pavers - Requirements and test methods |
| BS EN ISO 9974-1:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Threaded ports |
| BS EN 476:2011 | General requirements for components used in drains and sewers |
| BS EN 356:2000 | Glass in building. Security glazing. Testing and classification of resistance against manual attack |
| BS EN 14982 : 2006 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS |
| BS EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| BS EN 12790:2009 | Child use and care articles. Reclined cradles |
| BS EN 1727:1998 | Domestic furniture. Storage furniture. Safety requirements and test methods |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS EN 13748-1 : 2004 | TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL US |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS EN 14231:2003 | Natural stone test methods. Determination of the slip resistance by means of the pendulum tester |
| BS EN 1288-5:2000 | Glass in building. Determination of the bending strength of glass Coaxial double ring test on flat specimens with small test surface areas |
| DIN EN 681-1:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber |
| I.S. EN 527-3:2003 | OFFICE FURNITURE - WORK TABLES AND DESKS - PART 3: METHODS OF TEST FOR THE DETERMINATION OF THE STABILITY AND THE MECHANICAL STRENGTH OF THE STRUCTURE |
| I.S. EN 13036-4:2011 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST |
| I.S. EN ISO 8536-2:2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| DIN EN 12697-20:2012-06 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY) |
| I.S. EN 12790:2009 | CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
| EN 15807:2011 | Railway applications - Pneumatic half couplings |
| I.S. EN ISO 5470-1:2016 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| I.S. EN 13541:2012 | GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST EXPLOSION PRESSURE |
| I.S. EN ISO 8980-4:2007 | OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 4: SPECIFICATIONS AND TEST METHODS FOR ANTI-REFLECTIVE COATINGS |
| I.S. EN ISO 4535:1999 | VITREOUS AND PORCELAIN ENAMELS - APPARATUS FOR DETERMINATION OF RESISTANCE TO HOT DETERGENT SOLUTIONS USED FOR WASHING TEXTILES |
| DIN 53107:1982-05 | DETERMINING THE SMOOTHNESS OF PAPER AND BOARD BY THE BEKK METHOD |
| DIN EN 14483-4:2004-09 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL |
| I.S. EN 14354:2017 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
| EN ISO 12945-3:2014 | Textiles - Determination of the fabric propensity to surface pilling, fuzzing or matting - Part 3: Random tumble pilling method (ISO 12945-3:2014) |
| I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| I.S. EN 14241-1:2013 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| I.S. EN ISO 19879:2010 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| I.S. EN 12561-7:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS |
| I.S. EN 13787:2002 | ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| DIN EN 13597:2008-04 | Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| I.S. EN 1130-2:1996 | FURNITURE - CRIBS AND CRADLES FOR DOMESTIC USE - PART 2: TEST METHODS |
| DIN EN 13121-3:2016-10 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| DIN EN 681-4:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements |
| I.S. EN 3747:2007 | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| DIN EN 858-1:2002-05 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
| I.S. EN 476:2011 | GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS |
| I.S. EN 1344:2013 | CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14982:2006 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS |
| ISA 61241-0 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
| I.S. EN ISO 6806:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
| DIN EN 681-2:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers |
| DIN EN 14483-3:2004-09 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL |
| UNI EN 13036-4 : 2011 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST |
| BS 903-A57:1997 | Physical testing of rubber Determination of indentation hardness by means of pocket hardness meters |
| NF EN 476 : 2011 | GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS |
| BS 903-A16:1987 | Physical testing of rubber Determination of the effect of liquids |
| BS 7442-3.1:1998 | Rubber or plastics covered rollers. Method of test Determination of apparent hardness (IRHD method) |
| BS 1344-15:1997 | Methods of testing vitreous enamel finishes Apparatus for testing with alkaline liquids |
| BS 4832:1987 | Specification for compatibility between elastomeric materials and hydraulic fluids |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| BS 903-A16(1999) : 1999 | RUBBER, VULCANIZED - DETERMINATION OF THE EFFECT OF LIQUIDS |
| 12/30234431 DC : 0 | BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS |
| BS EN 15807:2011 | Railway applications. Pneumatic half couplings |
| BS ISO 5636-5:2013 | Paper and board. Determination of air permeance (medium range) Gurley method |
| ISO 16936-3:2005 | Glass in building — Forced-entry security glazing — Part 3: Test and classification by manual attack |
| I.S. EN ISO 8434-1:2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| I.S. EN ISO 18082:2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - DIMENSIONS OF NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES (ISO 18082:2014/AMD 1:2017) |
| ISO 9475:1994 | Aircraft inner tube and tubeless tyre valves Cores and caps Test methods |
| ISO 15717:1998 | Kitchen equipment Safety requirements and test methods for kitchen cabinets and work tops |
| BS ISO 16589-4:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures |
| UNI ISO 7619-2 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD |
| BS ISO 3387:2012 | Rubber. Determination of crystallization effects by hardness measurements |
| 14/30295535 DC : 0 | BS ISO 5794-2 - RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 2: EVALUATION PROCEDURES IN STYRENE-BUTADIENE RUBBER |
| 13/30290592 DC : 0 | BS EN 6111 - AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD |
| 03/118042 DC : DRAFT NOV 2003 | EN 14840 - JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
| 14/30293841 DC : 0 | BS ISO 16932 - GLASS IN BUILDING - DESTRUCTIVE-WINDSTORM-RESISTANT SECURITY GLAZING - TEST AND CLASSIFICATION |
| 09/30199060 DC : 0 | BS ISO 11926-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
| BS ISO 4195:2012 | Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods |
| DD ENV 1566-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity |
| DIN ISO 614:2015-12 | SHIPS AND MARINE TECHNOLOGY - TOUGHENED SAFETY GLASS PANES FOR RECTANGULAR WINDOWS AND SIDE SCUTTLES - PUNCH METHOD OF NON-DESTRUCTIVE STRENGTH TESTING (ISO 614:2012) |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| BS F 157:2006 | Properties of high tear strength silicone rubber sheet, mouldings and extrusions. Specification |
| UNE-EN ISO 28706-4:2016 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016) |
| BS F 162:2006 | Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from ethylene-propylene rubber material conforming to BS F 156. Specification |
| 93/110634 DC : DRAFT DEC 1993 | PREN 1345 - SPECIFICATION FOR CLAY PAVERS AND ACCESSORIES FOR RIGID PAVING |
| BS ISO 5636-6:2015 | Paper and board. Determination of air permeance (medium range) Oken method |
| 15/30317645 DC : 0 | BS EN ISO 6806 - RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION |
| 17/30357747 DC : DRAFT AUG 2017 | BS EN ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY |
| UNI EN 15807 : 2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| BS ISO 9211-4:2012 | Optics and photonics. Optical coatings Specific test methods |
| UNE-ISO 5636-5:2015 | Paper and board. Determination of air permeance (medium range). Part 5: Gurley method |
| BS C 22:1995 | Test methods for aircraft inner tube and tubeless tyre valves. Cores and caps |
| 14/30298583 DC : 0 | BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| ISO 1920-4:2005 | Testing of concrete Part 4: Strength of hardened concrete |
| 10/30219184 DC : 0 | BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| I.S. EN 14483-2:2004 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS |
| BS EN ISO 28706-4:2016 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel |
| 11/30234852 DC : 0 | BS ISO 614 - SHIPS AND MARINE TECHNOLOGY - TOUGHENED SAFETY GLASS PANES FOR RECTANGULAR WINDOWS AND SIDE SCUTTLES - PUNCH METHOD OF NON-DESTRUCTIVE STRENGTH TESTING |
| 16/30318232 DC : 0 | BS ISO 4662 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF REBOUND RESILIENCE |
| 00/716194 DC : DRAFT NOV 2000 | PREN 14073-3 - OFFICE FURNITURE - STORAGE FURNITURE - PART 3: TEST METHOD FOR THE DETERMINATION OF STABILITY AND STRENGTH OF THE STRUCTURE REQUIREMENTS |
| BS EN 12274-5:2003 | Slurry surfacing. Test methods Determination of wearing |
| ISO 10545-4:2014 | Ceramic tiles Part 4: Determination of modulus of rupture and breaking strength |
| BS ISO 9974-4:2006 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| BS ISO 6505:2015 | Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals |
| 15/30317651 DC : 0 | BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
| 00/560909 DC : DRAFT MAR 2000 | BS ISO 8871-2 - ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| 10/30196881 DC : 0 | BS ISO 6072 - RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS |
| BS ISO 18869:2017 | Hydraulic fluid power. Test methods for couplings actuated with or without tools |
| 14/30296011 DC : 0 | BS ISO 6505 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENDENCY TO ADHERE TO AND CORRODE METALS |
| PREN 13832-2 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS |
| DIN EN ISO 8362-2:2016-02 | Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015) |
| NF EN 12274-5 : 2003 | SLURRY SURFACING - TEST METHODS - PART 5: DETERMINATION OF WEARING |
| DIN ISO 8362-5:2011-06 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| BS 7796:1995 | Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series |
| NF EN ISO 19879 : 2010 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| 06/30133250 DC : 0 | BS EN 13071-1 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| 13/30279826 DC : 0 | BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| ISO 4639-3:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| BS ISO 3537:2015 | Road vehicles. Safety glazing materials. Mechanical tests |
| 03/106442 DC : DRAFT APR 2003 | ISO 4925 - ROAD VEHICLES - SPECIFICATION FOR NON-PETROLEUM BASE FLUIDS FOR HYDRAULIC SYSTEMS |
| DD ENV 1519-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE) Guidance for the assessment of conformity |
| BS EN ISO 8362-5:2016 | Injection containers and accessories Freeze drying closures for injection vials |
| NF EN 60068 2-32 : 1994 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST ED: FREE FALL |
| 09/30207051 DC : 0 | BS EN 13036-4 - METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF SURFACE - PART 4: THE PENDULUM TEST |
| 10/30192933 DC : 0 | BS ISO 6356 - TEXTILE FLOOR COVERINGS - ASSESSMENT OF STATIC ELECTRICAL PROPENSITY - WALKING TEST |
| BIS IS 3400-4 : 2012 | METHODS OF TEST FOR VULCANIZED RUBBER - PART 4: ACCELERATED AGEING AND HEAT RESISTANCE |
| 07/30046986 DC : DRAFT AUG 2007 | BS ISO 1288-2 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 2: COAXIAL DOUBLE-RING REST ON FLAT SPECIMENS WITH LARGE TEST SURFACE AREAS |
| ISO 7267-1:2017 | Rubber-covered rollers Determination of apparent hardness Part 1: IRHD method |
| UNI ISO 8434-6 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
| 12/30254122 DC : 0 | BS EN 1466 - CHILD USE AND CARE ARTICLES - CARRY COTS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS |
| 04/30112025 DC : DRAFT APR 2004 | ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
| BS ISO 6117:2005 | Road vehicles. Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.) |
| BS ISO 6072:2011 | Rubber. Compatibility between hydraulic fluids and standard elastomeric materials |
| 17/30355087 DC : 0 | BS ISO 13226 - RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
| UNI CEN/TS 15901-7 : 2010 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 7: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE USING A DEVICE WITH LONGITUDINAL FIXED SLIP RATIO (LFCG): THE GRIPTESTER |
| BS F 159:2006 | Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from oil resistant silicone rubber material conforming to BS F 153. Specification |
| ISO 1288-2:2016 | Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat specimens with large test surface areas |
| 10/30217322 DC : 0 | BS EN 1338 - CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
| 02/121978 DC : DRAFT APR 2002 | ISO/DIS 23711 - ELASTOMERIC SEALS - REQUIREMENTS FOR MATERIALS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - THERMOPLASTIC ELASTOMERS |
| 04/30123137 DC : DRAFT SEP 2004 | EN 14982 - RING STIFFNESS - PLASTICS PIPING SYSTEMS - PLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS |
| 07/30161675 DC : 0 | BS ISO 24454 - PHYSICAL TESTING OF RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE MULTI-POINT DATA |
| BS EN 60512-7-1:2010 | Connectors for electronic equipment. Tests and measurements Impact tests (free connectors). Test 7a. Free fall (repeated) |
| BS ISO 7267-1:2017 | Rubber-covered rollers. Determination of apparent hardness IRHD method |
| 15/30316981 DC : DRAFT FEB 2015 | BS EN 16837 - SURFACES FOR SPORTS AREAS - DETERMINATION OF LINEAR SHOE/SURFACE FRICTION |
| BS 903-4:2003 | Physical testing of rubber Acquisition and presentation of comparable multi-point data |
| ISO 4007:2012 | Personal protective equipment Eye and face protection Vocabulary |
| BS EN 50014:1998 | Electrical apparatus for potentially explosive atmospheres. General requirements |
| 04/30095733 DC : DRAFT APR 2004 | EN 13832-4 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 4: FOOTWEAR PROTECTIVE AGAINST MICRO-ORGANISMS |
| ONORM EN ISO 19879 : 2010 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| DIN EN 549:1995-04 | RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
| 17/30347025 DC : 0 | BS EN 15129 - ANTI-SEISMIC DEVICES |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| DIN EN ISO 12311:2015-06 | Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15); German version EN ISO 12311:2013 |
| UNE-EN 15807:2011 | Railway applications - Pneumatic half couplings |
| NF ISO 6072 : 2012 | RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS |
| ISO 13226:2011 | Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| DIN ISO 3302-1:2016-10 (Draft) | RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES |
| I.S. EN 60544-2:2012 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV)) |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| BS ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification |
| I.S. EN 50508:2009 | MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS |
| I.S. EN ISO 12311:2013 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15) |
| DIN EN 13832-3:2006-11 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| CSA E60079.0 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS |
| BS EN 13832-2:2006 | Footwear protecting against chemicals Requirements for footwear resistant to chemicals under laboratory conditions |
| ISO 24338:2014 | Laminate floor coverings Determination of abrasion resistance |
| BS EN 13121-3:2016 | GRP tanks and vessels for use above ground Design and workmanship |
| ISO 4639-1:1987 | Rubber tubing and hoses for fuel circuits for internal combustion engines Specification Part 1: Conventional liquid fuels |
| ISO 9553:1997 | Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors |
| UNI ISO 7619-1 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS) |
| I.S. EN 61230:2008 | LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING |
| I.S. EN 438-2:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| I.S. ISO 1817:1986 | RUBBER, VULCANIZED - DETERMINATION OF THE EFFECT OF LIQUIDS |
| UNE-EN 16084:2011 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints |
| UNI EN ISO 4007 : 2012 | PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY |
| ISO 2733:1983 | Vitreous and porcelain enamels Apparatus for testing with acid and neutral liquids and their vapours |
| I.S. EN 279:1992 | HOMOGENOUS RUBBER MATERIALS FOR DYNAMIC SEALS IN DOMESTIC APPLIANCES USING COMBUSTIBLE GASES UP TO 200 MBAR |
| I.S. EN 15551:2017 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| BS EN ISO 10545-4:2014 | Ceramic tiles Determination of modulus of rupture and breaking strength |
| UNE-EN 13121-3:2017 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| UNI EN ISO 8434-1 : 2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| PREN 15566 : DRAFT 2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| SAE J518/2_201704 | Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 2: 42 MPa (Code 62) |
| BS EN 13071-1:2008 | Stationary waste containers up to 5000 l, top lifted and bottom emptied General requirements |
| UNI EN ISO 9117-6 : 2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST |
| NF EN 60068 2-31 : 2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| BS EN ISO 10555-6:2017 | Intravascular catheters. Sterile and single-use catheters Subcutaneous implanted ports |
| S.R. CEN TS 15901-8:2009 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 8: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY-FORCE COEFFICIENT (SFCD): SKM |
| S.R. CEN TS 15901-4:2009 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 4: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF PAVEMENTS USING A DEVICE WITH LONGITUDINAL CONTROLLED SLIP (LFCT): TATRA RUNWAY TESTER (TRT) |
| BIS IS/ISO 6194-1 : 2007 | ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| ISO 16935:2007 | Glass in building — Bullet-resistant security glazing — Test and classification |
| ISO 7267-3:2017 | Rubber-covered rollers Determination of apparent hardness Part 3: Pusey and Jones method |
| ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 4: Performance test procedures |
| EN ISO 10545-4:2014 | Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014) |
| ISO 16934:2007 | Glass in building — Explosion-resistant security glazing — Test and classification by shock-tube loading |
| ISO 6505:2015 | Rubber, vulcanized or thermoplastic Determination of tendency to adhere to and corrode metals |
| ISO 4633:2015 | Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
| ISO 8434-6:2009 | Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring |
| EN 13832-2:2006 | Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
| ISO 16936-1:2005 | Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop |
| ISO 16010:2005 | Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
| DIN EN ISO 8871-2:2014-08 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003 + AMD.1:2005) |
| ISO 6447:1983 | Rubber seals Joint rings used for gas supply pipes and fittings Specification for material |
| I.S. EN 13329:2016 | LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| ISO 614:2012 | Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing |
| ISO 4195-1:1987 | Conveyor belts — Heat resistance — Part 1: Test method |
| ISO 10555-6:2015 | Intravascular catheters Sterile and single-use catheters Part 6: Subcutaneous implanted ports |
| I.S. EN 15566:2016 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| IEC 60092-351:2004 | Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables |
| ISO 8536-6:2016 | Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles |
| DIN EN 12790:2009-07 | Child use and care articles - Reclined cradles |
| DIN EN 14188-3:2006-04 | Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
| DIN EN 13748-1:2005-08 | TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE |
| EN 61518:2001/corrigendum:2002 | MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA) |
| DIN EN 681-1:2016-07 (Draft) | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016 |
| DIN EN 1097-8:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| DIN EN 682:2006-10 | Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
| DIN EN 1288-2:2000-09 | GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 2: COAXIAL DOUBLE RING TEST ON FLAT SPECIMENS WITH LARGE TEST SURFACE AREAS |
| DIN EN 14382:2016-05 (Draft) | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 681-4:2000 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements |
| EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
| ISO 28706-4:2016 | Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel |
| ISO 3822-4:1997 | Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 4: Mounting and operating conditions for special appliances |
| ISO 12311:2013 | Personal protective equipment — Test methods for sunglasses and related eyewear |
| BS EN 1051-1:2003 | Glass in building. Glass blocks and glass pavers Definitions and description |
| BS EN 14483-3:2004 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel |
| BS EN 13213:2001 | Hollow floors |
| ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners — Specification |
| ISO 8434-4:1995 | Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ONORM EN 1097-8 : 2011 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| OVE/ONORM E 8200-605 : 2009 | ELECTRIC CABLES - ADDITIONAL TEST METHODS |
| I.S. EN ISO 8871-2:2004 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003) |
| EN ISO 9117-5:2012 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
| EN 14354:2017 | Wood-based panels - Wood veneer floor coverings |
| EN ISO 6149-3:2007 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006) |
| UNI EN 15330-1 : 2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| BS 1970:2006 | Hot water bottles manufactured from rubber and PVC. Specification |
| UNI EN 14982 : 2010 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS |
| ONORM EN 476 : 2011 | GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS |
| UNI EN ISO 10545-4 : 2014 | CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH |
| EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
| UNI EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| UNI EN 13541 : 2012 | GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST EXPLOSION PRESSURE |
| UNI EN 1344 : 2013 | CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 14241-1 : 2013 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| UNI EN 476 : 2011 | GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS |
| UNI EN 1340 : 2004 | CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS |
| UNI EN 14382 : 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| UNI EN 1338 : 2004 | CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 15901-8 : 2010 | Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM |
| UNI EN 12790 : 2009 | CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
| UNI EN 12561-7 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS |
| BS 1755-1:1982 | Glossary of terms used in the plastics industry Polymer and plastics technology |
| UNI EN 1339 : 2005 | CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS |
| UNE-ISO 7619-1:2011 | Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness) |
| BS 3900-C8(1978) : 1978 AMD 8613 | METHODS OF TEST FOR PAINTS - TESTS ASSOCIATED WITH PAINT FILM FORMATION - PRINT-FREE TEST |
| ISO 14949:2001 | Implants for surgery — Two-part addition-cure silicone elastomers |
| I.S. EN 15807:2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| 07/30169170 DC : 0 | BS ISO 28706-4 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL |
| 16/30338249 DC : 0 | BS EN 12274-4 - SLURRY SURFACING - TEST METHODS - PART 4: DETERMINATION OF COHESION OF THE MIX |
| UNI CEN/TS 15676 : 2008 | WOOD FLOORING - SLIP RESISTANCE - PENDULUM TEST |
| DIN EN 50014 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| 17/30353012 DC : 0 | BS ISO 13926-2 - PEN SYSTEMS - PART 2: PLUNGER STOPPERS FOR PEN-INJECTORS FOR MEDICAL USE |
| ISO 19662:2018 | Milk — Determination of fat content — Acido-butyrometric (Gerber method) |
| BS ISO 14949:2001 | Implants for surgery. Two-part addition-cure silicone elastomers |
| UNI CEN/TS 15901-6 : 2010 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 6: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY FORCE COEFFICIENT (SFCS): SCRIM |
| BS ISO 9940:2015 | Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
| 00/560161 DC : DRAFT JAN 2000 | BS ISO 11040-5 - PRE-FILLED SYRINGES - PART 5: PLUNGERS FOR INJECTABLES |
| 05/30138125 DC : DRAFT AUG 2005 | ISO 9911 - AGRICULTURAL IRRIGATION EQUIPMENT - MANUALLY OPERATED SMALL PLASTICS VALVES |
| 15/30317619 DC : 0 | BS EN ISO 5470-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER |
| BS ISO 5794-3:2011 | Rubber compounding ingredients. Silica, precipitated, hydrated Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR) |
| 11/30246635 DC : 0 | BS EN ISO 10545-4 - CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH |
| BS EN 60544-4:2003 | Electrical insulating materials. Determination of the effects of ionizing radiation Classification system for service in radiation environments |
| I.S. EN 13071:2002 | SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE |
| 06/30117784 DC : DRAFT JAN 2006 | ISO 12046 - SYNCHRONOUS BELT DRIVES - AUTOMOTIVE BELTS - DETERMINATION OF PHYSICAL PROPERTIES |
| 11/30212464 DC : 0 | BS ISO 18898 - RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS |
| 13/30278095 DC : 0 | BS EN ISO 10545-4 - CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH |
| DIN EN ISO 28706-2:2016-04 (Draft) | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS (ISO 28706-2:2017) |
| I.S. EN 12227-2:2000 | PLAYPENS FOR DOMESTIC USE - PART 2: TEST METHODS |
| BS ISO 13268:2010 | Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness |
| 07/30171274 DC : 0 | BS EN ISO 14439 - GLASS IN BUILDING - ASSEMBLY RULES - GLAZING WEDGES |
| ISO 3537:2015 | Road vehicles Safety glazing materials Mechanical tests |
| 06/30145464 DC : 0 | EN 13696 - WOOD FLOORING (INCLUDING PARQUET) - TEST METHOD TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR |
| 09/30198118 DC : 0 | BS ISO 13260 - THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING |
| 11/30219041 DC : DRAFT APR 2011 | BS ISO 14903 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| DIN ISO 15759:2006-05 | Medical infusion equipment - Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process (ISO 15759:2005) |
| ISO 16589-4:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures |
| 10/30195690 DC : 0 | BS EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| I.S. EN ISO 8434-4:2000 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| BS ISO 4930:2006 | Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150°C max.) |
| BS 1344-19(1984) : AMD 10426 | METHODS OF TESTING VITREOUS ENAMEL FINISHES - APPARATUS FOR DETERMINATION OF RESISTANCE TO HOT DETERGENT SOLUTIONS USED FOR WASHING TEXTILES |
| BS EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers |
| UNI ISO 188 : 2012 | RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS |
| BS F 153:2006 | Properties of oil resistant silicone rubber sheet, mouldings and extrusions. Specification |
| 07/30046990 DC : DRAFT AUG 2007 | BS ISO 1288-3 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 3: TEST WITH SPECIMEN SUPPORTED AT TWO POINTS (FOUR POINT BENDING) |
| 14/30293850 DC : 0 | BS ISO 29584 - GLASS IN BUILDING - PENDULUM IMPACT TESTING AND CLASSIFICATION OF SAFETY GLASS |
| DD CEN/TS 15901-7:2009 | Road and airfield surface characteristics Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG). The GripTester® |
| DD ENV 12633:2003 | Method of determination of unpolished and polished slip/skid resistance value |
| 14/30304354 DC : 0 | BS EN ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| BS EN 60068-2-31:2008 | Environmental testing Tests. Test Ec. Rough handling shocks, primarily for equipment-type specimens |
| I.S. EN 14483-3:2004 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL |
| BS ISO 3302-1:2014 | Rubber. Tolerances for products Dimensional tolerances |
| BS EN 50620:2017 | Electric cables. Charging cables for electric vehicles (BT(DE/NOT)259) |
| BS ISO 4666-3:2016 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Compression flexometer (constant-strain type) |
| 08/30156909 DC : DRAFT APR 2008 | BS EN 15807 - RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| BS 7470:1991 | Specification for clear-view screens for use in ships |
| 14/30302298 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| BS F 154:2006 | Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification |
| BS EN 61230:2008 | Live working. Portable equipment for earthing or earthing and short-circuiting |
| 13/30290460 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| 16/30293875 DC : 0 | BS EN ISO 28706-2 - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS |
| 02/102106 DC : DRAFT MAR 2002 | PREN 13748-2 - TERRAZZO TILES - PART 2: TERRAZZO TILES FOR EXTERIOR USE |
| PD CEN/TS 12697-50:2016 | Bituminous mixtures. Test methods Resistance to scuffing |
| BS ISO 7267-3:2017 | Rubber-covered rollers. Determination of apparent hardness Pusey and Jones method |
| 11/30211730 DC : 0 | BS ISO 9352 - PLASTICS - DETERMINATION OF RESISTANCE TO WEAR BY ABRASIVE WHEELS |
| 16/30320762 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| PREN 13832-3 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR PROLONGED CONTACT WITH CHEMICALS |
| BS ISO 9352:2012 | Plastics. Determination of resistance to wear by abrasive wheels |
| PREN ISO 10545-4 : DRAFT 2013 | CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH (ISO/DIS 10545-4:2013) |
| 05/30127024 DC : DRAFT SEP 2005 | ISO 4930 - ROAD VEHICLES - ELASTOMERIC SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 150 DEGREE C MAX.) |
| BS 3900-E15(1997) : 1997 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE RUBBER WHEEL) |
| BS EN ISO 8362-2:2015 | Injection containers and accessories Closures for injection vials |
| BS EN 13329 : 2016 | LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| BS ISO 5794-2:2014 | Rubber compounding ingredients. Silica, precipitated, hydrated Evaluation procedures in styrene-butadiene rubber |
| BS ISO 13926-2:2017 | Pen systems Plunger stoppers for pen-injectors for medical use |
| BS ISO 27588:2012 | Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale |
| 01/714273 DC : 0 | ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| 04/30110818 DC : 0 | ISO 18517 - RUBBER, VULCANIZED OR THERMOPLASTIC - HARDNESS TESTING - INTRODUCTION AND GUIDE |
| DIN EN ISO 9117-5:2012-11 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
| UNE 211632-1:2017 | Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV). Part 1: Requirements and test methods |
| 05/30127034 DC : DRAFT SEP 2005 | ISO 6119 - ROAD VEHICLES - ELASTOMERIC SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGREE C MAX.) |
| BS ISO 7619-2:2004 | Rubber, vulcanized or thermoplastic. Determination of indentation hardness IRHD pocket meter method |
| DIN 19538-10 E : 1999 | PIPES AND FITTINGS MADE OF CHLORINATED POLYVINYL CHLORIDE (PVC-C) FOR HOT-WATER RESISTANT WASTE AND SOIL DISCHARGE SYSTEMS INSIDE BUILDINGS - PART 10: FIRE BEHAVIOUR, QUALITY CONTROL AND INSTALLATION RECOMMENDATIONS |
| BS EN ISO 12945-3:2014 | Textiles. Determination of the fabric propensity to surface pilling, fuzzing or matting Random tumble pilling method |
| BIS IS 3400-6 : 2012 | METHODS OF TEST FOR VULCANIZED RUBBER - PART 6: DETERMINATION OF THE EFFECT OF LIQUIDS |
| 04/30095727 DC : DRAFT APR 2004 | EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: PROTECTION AGAINST CHEMICALS SPRAYING |
| PREN 14420-7 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| 13/30241415 DC : 0 | BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| DIN EN ISO 8362-5:2016-07 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
| 03/112934 DC : 0 | ISO 21690 - GLASS IN BUILDING - GLASS BLOCKS - SPECIFICATION |
| XP ENV 1565-2 : 2003 XP | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS ISO 29584:2015 | Glass in building. Pendulum impact testing and classification of safety glass |
| BS ISO 6162-1:2012 | Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| 13/30278121 DC : 0 | BS ISO 3302-1 - RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES |
| BS EN ISO 9117-5:2012 | Paints and varnishes. Drying tests Modified Bandow-Wolff test |
| BS ISO 1382:2012 | Rubber. Vocabulary |
| BS ISO 6149-2:1993 | Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements. |
| BS ISO 8434-4 : 1995 AMD 11038 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| UNE-EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
| DIN EN 13832-2:2006-11 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| 01/121060 DC : DRAFT MAR 2001 | PREN 13121-3 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| BS EN 61823:2003 | Electrical installations for lighting and beaconing of aerodromes. AGL series transformers |
| SAE J518/1_201301 | Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 1: 3.5 MPa to 35 MPa (Code 61) |
| BS ISO 19003:2006 | Rubber and rubber products. Guidance on the application of statistics to physical testing |
| 07/30169154 DC : 0 | BS ISO 28706-2 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS |
| I.S. EN 1081:1998 | RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE |
| DIN ISO 3601-1:2013-11 | Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes (ISO 3601-1:2012 + Cor. 1:2012) |
| PREN 6111 : 200P1 | AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) - HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD |
| DD ENV 1565-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC) Guidance for the assessment of conformity |
| BS ISO 22762-1:2005 | Elastomeric seismic-protection isolators Test methods |
| UNI EN 16084 : 2011 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| PREN 3207 : 1996 | AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
| 17/30346164 DC : 0 | BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
| API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| CEI 20-66 : 2010 | POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 36 KV (U[M] = 42 KV) UP TO 150 KV (U[M] = 170 KV) |
| ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
| ISO 19660:2018 | Cream — Determination of fat content — Acido-butyrometric method |
| UNI EN ISO 9117-5 : 2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST |
| I.S. EN ISO 8362-5:2016 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
| 16/30318653 DC : 0 | BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| ISO 6117:2005 | Road vehicles — Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.) |
| UNI ISO 8434-3 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS |
| XP CEN/TS 15901-6 : 2011 XP | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 6: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY FORCE COEFFICIENT (SFCS): SCRIM |
| I.S. EN 13832-3:2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| ISO 2734:1997 | Vitreous and porcelain enamels Apparatus for testing with alkaline liquids |
| EN ISO 14903:2017 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017) |
| ISO 5794-3:2011 | Rubber compounding ingredients Silica, precipitated, hydrated Part 3: Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR) |
| ISO 16589-1:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances |
| ISO 13268:2010 | Thermoplastics piping systems for non-pressure underground drainage and sewerage Thermoplastics shafts or risers for inspection chambers and manholes Determination of ring stiffness |
| ISO 18869:2017 | Hydraulic fluid power — Test methods for couplings actuated with or without tools |
| ISO 6356:2012 | Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
| IEC 60079-0:2017 | Explosive atmospheres - Part 0: Equipment - General requirements |
| BS ISO 4666-4:2007 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Constant-stress flexometer |
| EN 13832-3:2006 | Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
| DIN EN ISO 8434-1:2016-10 (Draft) | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| 18/30365845 DC : 0 | BS EN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
| ISO 16936-2:2005 | Glass in building — Forced-entry security glazing — Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature |
| 18/30368675 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| ISO 1288-3:2016 | Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending) |
| ISO 7619-2:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method |
| I.S. EN ISO 28706-4:2016 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL (ISO 28706-4:2016) |
| UNE-EN ISO 9117-5:2013 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
| ISO 13363:2016 | Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification |
| PREN 1339 : DRAFT 2010 | CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS |
| BS EN 1081:1998 | Resilient floor coverings. Determination of the electrical resistance |
| UNI EN 13071-1 : 2008 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 50508:2011 | Multi-purpose insulating sticks for electrical operations on high voltage installations |
| UNE-EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| ISO 3601-5:2015 | Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications |
| DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| ISO 1382:2012 | Rubber Vocabulary |
| ISO 24454:2008 | Rubber Acquisition and presentation of comparable multi-point data |
| ISO 24453:2008 | Rubber Acquisition and presentation of comparable single-point data |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| ISO 6446:1994 | Rubber products — Bridge bearings — Specification for rubber materials |
| EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| PREN 1338 : DRAFT 2010 | CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| ISO 23711:2003 | Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers |
| ISO 5636-6:2015 | Paper and board Determination of air permeance (medium range) Part 6: Oken method |
| I.S. 140-2:1987 | SCHOOL FURNITURE - PART 2: PERFORMANCE REQUIREMENTS AND TESTS FOR CHAIRS FOR SCHOOLS |
| ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| I.S. EN 61241-0:2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| ISO 11040-2:2011 | Prefilled syringes Part 2: Plunger stoppers for dental local anaesthetic cartridges |
| ISO 18517:2015 | Rubber, vulcanized or thermoplastic Hardness testing Introduction and guide |
| I.S. EN ISO 9117-1:2009 | PAINTS AND VARNISHES - DRYING TESTS - PART 1: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME |
| ISO 13926-2:2017 | Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use |
| I.S. EN ISO 28706-2:2017 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS (ISO 28706-2:2017) |
| I.S. EN 61823:2003 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - AGL SERIES TRANSFORMERS |
| ISO 7619:1997 | Rubber Determination of indentation hardness by means of pocket hardness meters |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| I.S. EN ISO 8362-2:2015 | INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION VIALS (ISO 8362-2:2015) |
| NF EN ISO 8871-2 : 2005 AMD 1 2014 | ELECTROMETRIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION |
| DIN EN ISO 6806:2015-08 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
| DIN EN 1288-5:2000-09 | GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 5: COAXIAL DOUBLE RING TEST ON FLAT SPECIMENS WITH SMALL TEST SURFACE AREAS |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| DIN EN 1288-3:2000-09 | GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 3: TEST WITH SPECIMEN SUPPORTED AT TWO POINTS (FOUR POINT BENDING) |
| BS EN 3050:1998 | O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification |
| BS EN 14354:2017 | Wood-based panels. Wood veneer floor coverings |
| I.S. EN 13150:2001 | WORKBENCHES FOR LABORATORIES - DIMENSIONS, SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
| UNI EN 12697-20 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY) |
| I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN ISO 6149-3:2007 | Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| UNE-EN ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
| ISO 28706-2:2017 | Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours |
| IEC 60079-0:2017 RLV | Explosive atmospheres - Part 0: Equipment - General requirements |
| ONORM EN 12697-22 : 2007 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
| BS EN 12697-20:2012 | Bituminous mixtures. Test methods for hot mix asphalt Indentation using cube or cylindrical specimens (CY) |
| BS EN 805:2000 | Water supply. Requirements for systems and components outside buildings |
| BS EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics. Determination of abrasion resistance Taber abrader |
| ISO 4869-3:2007 | Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture |
| ISO 8536-2:2010 | Infusion equipment for medical use — Part 2: Closures for infusion bottles |
| ISO 9117-1:2009 | Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time |
| ISO 2039-2:1987 | Plastics — Determination of hardness — Part 2: Rockwell hardness |
| IEC 60512-7-1:2010 | Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) |
| BS EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
| BS EN 773:1999 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| UNE-EN 12697-20:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or cylindrical specimens (CY) |
| UNE 41902:2017 EX | Surfaces for pedestrian transit. Determination of the slip resistance by pendulum friction method . Dry test. |
| BS EN 1288-2:2000 | Glass in building. Determination of the bending strength of glass Coaxial double ring test on flat specimens with large test surface areas |
| BS EN 14483-4:2004 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel |
| ISO 18082:2014 | Anaesthetic and respiratory equipment — Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases |
| ISO 9117-5:2012 | Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test |
| UNI EN 1097-8 : 2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| BS EN 13150:2001 | Workbenches for laboratories. Dimensions, safety requirements and test methods |
| UNI EN 1097-2 : 2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners. Specification |
| IEC 60544-2:2012 | Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test |
| ISO 9117-6:2012 | Paints and varnishes — Drying tests — Part 6: Print-free test |
| BS EN 14188-3 : 2005 | JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
| BS EN 13748-2:2004 | Terrazzo tiles Terrazzo tiles for external use |
| BS EN 13036-4:2011 | Road and airfield surface characteristics. Test methods Method for measurement of slip/skid resistance of a surface: The pendulum test |
| BS EN ISO 8980-4:2006 | Ophthalmic optics. Uncut finished spectacle lenses Specifications and test methods for anti-reflective coatings |
| ISO 8362-5:2016 | Injection containers and accessories Part 5: Freeze drying closures for injection vials |
| UNE-EN 13541:2012 | Glass in building - Security glazing - Testing and classification of resistance against explosion pressure |
| ISO 5470-1:2016 | Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader |
| ISO 4535:1983 | Vitreous and porcelain enamels Apparatus for determination of resistance to hot detergent solutions used for washing textiles |
| ONORM EN 12697-20 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY) |
| ISO/TR 4869-3:1989 | Acoustics Hearing protectors Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes |
| BS EN ISO 2039-2:2000 | Determination of Rockwell hardness. Rockwell hardness Rockwell hardness |
| 03/110544 DC : DRAFT JUNE 2003 | ISO 16936-3 - GLASS IN BUILDING - FORCED-ENTRY SECURITY GLAZING. TEST AND CLASSIFICATION - PART 3: TEST AND CLASSIFICATION BY MANUAL ATTACK |
| ISO 9237:1995 | Textiles — Determination of the permeability of fabrics to air |
| BS EN 1337-3:2005 | Structural bearings Elastomeric bearings |
| ISO 9974-2:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E) |
| IEC 61823:2002 | Electrical installations for lighting and beaconing of aerodromes - AGL series transformers |
| BS EN 1153:1996 | Kitchen furniture. Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops |
| ISO 12945-3:2014 | Textiles- Determination of the fabric propensity to surface pilling, fuzzing or matting Part 3: Random tumble pilling method |
| ISO 8980-4:2006 | Ophthalmic optics — Uncut finished spectacle lenses — Part 4: Specifications and test methods for anti-reflective coatings |
| IEC 61518:2001 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa) |
| ISO 3678:1976 | Paints and varnishes — Print-free test |
| ISO 8362-2:2015 | Injection containers and accessories — Part 2: Closures for injection vials |
| BS EN 1288-3:2000 | Glass in building. Determination of the bending strength of glass Test with specimen supported at two points (four point bending) |
| ISO 8871-2:2003 | Elastomeric parts for parenterals and for devices for pharmaceutical use Part 2: Identification and characterization |
| BS EN 13541:2012 | Glass in building. Security glazing. Testing and classification of resistance against explosion pressure |
| 05/30134569 DC : DRAFT JUN 2005 | IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| I.S. EN 12697-22:2004 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
| ISO 8871-1:2003 | Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates |
| UNE-EN ISO 13260:2012 | Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010) |
| BS EN 1288-4:2000 | Glass in building. Determination of the bending strength of glass Testing of channel shaped glass |
| UNE-EN 13329:2016 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| I.S. EN 12697-20:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY) |
| ISO 8980-5:2005 | Ophthalmic optics Uncut finished spectacle lenses Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant |
| BS EN 15330-1:2013 | Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use |
| BS EN ISO 8536-2:2010 | Infusion equipment for medical use Closures for infusion bottles |
| BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| UNE-EN 14354:2017 | Wood-based panels - Wood veneer floor coverings |
| BS EN 12697-22:2003 | Bituminous mixtures. Test methods for hot mix asphalt Wheel tracking |
| ISO 6149-2:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| BS EN 682:2002 | Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids |
| BS EN 12503-6:2001 | Sports mats Determination of the top friction |
| BS EN ISO 4535:2000 | Vitreous and porcelain enamels. Apparatus for determination of resistance to hot detergent solutions used for washing textiles |
| UNE-EN 12561-7:2012 | Railway applications - Tank wagons - Part 7: Platforms and ladders |
| ISO 19879:2010 | Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
| UNE 41901:2017 EX | Surfaces for pedestrian transit. Determination of the slip resistance by pendulum friction method. Wet test. |
| BS EN 13787:2001 | Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar |
| BS EN 3207:1998 | Rubber compounds. Technical specification |
| I.S. EN 1097-8:2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| ISO 6149-3:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| EN 12697-20:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or cylindrical specimens (CY) |
| BS EN 1123-1:1999 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Requirements, testing, quality control |
| BS EN 1063:2000 | Glass in building. Security glazing. Testing and classification of resistance against bullet attack |
| EN 13150:2001 | Workbenches for laboratories - Dimensions, safety requirements and test methods |
| DIN EN 12697-22:2007-10 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
| EN 15330-1:2013 | Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use |
| EN 356:1999 | Glass in building - Security glazing - Testing and classification of resistance against manual attack |
| EN 14188-3:2006 | Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
| EN ISO 9237:1995 | Textiles - Determination of permeability of fabrics to air (ISO 9237:1995) |
| EN ISO 6149-2:2007 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2007) |
| EN ISO 4869-3:2007 | Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007) |
| EN ISO 8980-4:2006 | Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings (ISO 8980-4:2006) |
| EN 14483-3:2004 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel |
| EN ISO 8536-2:2010 | Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010) |
| EN ISO 8980-5:2005 | Ophthalmic optics - Uncut finished spectacle lenses - Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant (ISO 8980-5:2005) |
| EN 773:1999 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| EN ISO 2039-2:1999 | Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987) |
| EN 14241-1:2013 | Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
| EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
| EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| EN 13748-2:2004 | Terrazzo tiles - Part 2: Terrazzo tiles for external use |
| EN 14231:2003 | Natural stone test methods - Determination of the slip resistance by means of the pendulum tester |
| EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011) |
| EN ISO 9974-2:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996) |
| EN ISO 12311 : 2013 COR 2014 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15) |
| EN ISO 28706-4:2016 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016) |
| EN 29117 : 1992 | PAINTS AND VARNISHES - DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME - METHOD OF TEST |
| EN ISO 9117-6:2012 | Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012) |
| EN 14982:2006+A1:2010 | Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness |
| EN 16084:2011 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints |
| EN ISO 3822-4:1997 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances |
| EN ISO 4535 : 1998 | VITREOUS AND PORCELAIN ENAMELS - APPARATUS FOR DETERMINATION OF RESISTANCE TO HOT DETERGENT SOLUTIONS USED FOR WASHING TEXTILES |
| EN 805:2000 | Water supply - Requirements for systems and components outside buildings |
| EN 527-3:2003 | Office furniture - Work tables and desks - Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure |
| EN ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
| EN 13787:2001 | Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN 24869-3 : 1993 | ACOUSTICS - HEARING PROTECTORS - SIMPLIFIED METHOD FOR THE MEASUREMENT OF INSERTION LOSS OF EAR-MUFF TYPE PROTECTORS FOR QUALITY INSPECTION PURPOSES |
| EN 13597:2003 | Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| EN 3207:1998 | Aerospace series - Rubber compounds - Technical specification |
| EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| EN 1727 : 1998 | DOMESTIC FURNITURE - STORAGE FURNITURE - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 14483-2:2004 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours |
| EN ISO 28706-2:2017 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017) |
| EN 279 : 1991 | HOMOGENOUS RUBBER MATERIALS FOR DYNAMIC SEALS IN DOMESTIC APPLIANCES USING COMBUSTIBLE GASES UP TO 200 MBAR |
| EN 16230-1:2013+A1:2014 | Leisure karts - Part 1: Safety requirements and test methods for karts |
| EN 3747:2007 | Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification |
| EN ISO 3678:1995 | Paints and varnishes - Print-free test (ISO 3678:1976) |
| EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| EN ISO 8362-2:2015 | Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015) |
| EN ISO 8871-1:2004 | Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates (ISO 8871-1:2003) |
| EN ISO 8434-4 : 2000 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| EN 3050:1998 | Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification |
| EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
| EN ISO 9117-1:2009 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
| EN 14483-4:2004 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel |
| I.S. ENV 12633:2003 | METHOD OF DETERMINATION OF UNPOLISHED AND POLISHED SLIP/SKID RESISTANCE VALUE |
| 16/30338569 DC : 0 | BS EN 12274-5 - SLURRY SURFACING - TEST METHOD - PART 5: DETERMINATION OF THE MINIMUM BINDER CONTENT AND WEARING RESISTANCE |
| 03/110806 DC : DRAFT JUNE 2003 | BS ISO 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| 04/30099874 DC : DRAFT JUL 2004 | ISO 9211-4 - OPTICS AND OPTICAL INSTRUMENTS - OPTICAL COATINGS - PART 4: SPECIFIC TEST METHODS |
| 05/30089181 DC : DRAFT FEB 2005 | ISO 4195 - CONVEYOR BELTS - HEAT RESISTANCE |
| BS 903-3:2003 | Physical testing of rubber Acquisition and presentation of comparable single-point data |
| 14/30296014 DC : 0 | BS ISO 18517 - RUBBER, VULCANIZED OR THERMOPLASTIC - HARDNESS TESTING - INTRODUCTION AND GUIDE |
| BS ISO 4928:2006 | Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120°C max.) |
| DIN ISO 11040-2:2012-10 | Prefilled syringes - Part 2: Plunger stoppers for dental local anaesthetic cartridges (ISO 11040-2:2011) |
| 96/106381 DC : DRAFT AUG 1996 | PREN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
| EN ISO 4007:2012 | Personal protective equipment - Eye and face protection - Vocabulary (ISO 4007:2012) |
| UNE-EN 15566:2017 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| DIN ISO 4925:1980-04 | ROAD VEHICLES - NON-PETROLEUM BASE BRAKE FLUID |
| BS ISO 10555-6 : 2015 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS |
| ISO 4195-2:1988 | Conveyor belts — Heat resistance — Part 2: Specifications |
| BS ISO 8536-6:2016 | Infusion equipment for medical use Freeze drying closures for infusion bottles |
| I.S. EN 29117:1993 | PAINTS AND VARNISHES - DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME - METHOD OF TEST |
| 13/30262917 DC : 0 | BS EN 15330-1 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| BS EN ISO 12311:2013 | Personal protective equipment. Test methods for sunglasses and related eyewear |
| 14/30219261 DC : 0 | BS ISO 5636-6 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 6: OKEN METHOD |
| 17/30348155 DC : 0 | BS EN ISO 10545-4 - CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH |
| UNI EN ISO 9117-1 : 2009 | PAINTS AND VARNISHES - DRYING TESTS - PART 1: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME |
| PREN 1337-3 : DRAFT 2018 | STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
| BS EN 60544-2:2012 | Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test |
| 14/30288439 DC : 0 | BS ISO 1817 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF THE EFFECT OF LIQUIDS |
| BS ISO 24338:2014 | Laminate floor coverings. Determination of abrasion resistance |
| BS ISO 14903:2012 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| SAE J1926/2_201609 | Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends |
| 06/30113809 DC : DRAFT APR 2006 | ISO 4666-4 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RAISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 4: CONSTANT STRESS FLEXOMETER |
| 13/30289253 DC : 0 | BS EN 13329 - LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| 08/30166722 DC : DRAFT MAR 2008 | BS ISO 4662 - RUBBER - DETERMINATION OF REBOUND RESILIENCE OF VULCANIZATES |
| BS EN ISO 28706-3:2011 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel |
| BS 2782-3 Method 370:1990 | Methods of testing plastics. Mechanical properties Determination of resistance to wear by abrasive wheels |
| I.S. EN 13832-2:2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| 14/30243471 DC : 0 | BS ISO 15082 - ROAD VEHICLES - TESTS FOR RIGID PLASTIC SAFETY GLAZING MATERIALS |
| 16/30328245 DC : 0 | BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80 |
| UNE-ISO 4662:2013 | Rubber, vulcanized or thermoplastic — Determination of rebound resilience |
| 12/30238550 DC : 0 | BS EN ISO 12945-3 - TEXTILES - DETERMINATION OF THE FABRIC PROPENSITY TO SURFACE PILING, FUZZING OR MATTING - PART 3: RANDOM TUMBLE PILING METHOD |
| PREN 12274-4 : DRAFT 2016 | SLURRY SURFACING - TEST METHODS - PART 4: DETERMINATION OF COHESION OF THE MIX |
| 02/122387 DC : DRAFT JUN 2002 | ISO/DIS 7619-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD |
| BS EN ISO 28706-2:2017 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| 04/30123909 DC : DRAFT OCT 2004 | ISO 16934 - GLASS IN BUILDING - EXPLOSION-RESISTANT SECURITY GLAZING - TEST AND CLASSIFICATION BY SHOCK TUBE LOADING |
| DIN EN 1338:2003-08 | CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
| BS ISO 6118:2006 | Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70°C max.) |
| DIN ISO 9211-4 E : 2014 | OPTICS AND PHOTONICS - OPTICAL COATINGS - PART 4: SPECIFIC TEST METHODS (ISO 9211-4:2012) |
| DIN EN 16230-1:2015-04 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| BS EN ISO 14903:2017 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| 04/30076765 DC : DRAFT MAR 2004 | BS ISO 24338 - LAMINATE FLOOR COVERINGS - DETERMINATION OF ABRASION RESISTANCE |
| 03/118041 DC : DRAFT NOV 2003 | EN 14188-3 - JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATION FOR PREFORMED JOINT SEALS |
| 10/30210872 DC : 0 | BS EN ISO 9117-5 - PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST |
| 04/30046221 DC : 0 | PREN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| DIN EN 1340:2003-08 | CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS |
| 14/30314166 DC : 0 | BS EN 6109 - AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION |
| 06/30149088 DC : DRAFT SEP 2006 | ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| BS ISO 188:2011 | Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests |
| UNE-CEN/TS 15901-7:2010 IN | Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester(r) |
| DD ENV 1455-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS) Guidance for the assessment of conformity |
| BS 3900-E14(1997) : 1997 AMD 16870 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE-PAPER-COVERED WHEEL) |
| 00/716137 DC : DRAFT NOV 2000 | BS EN 1178-2 - FURNITURE - HIGH CHAIRS FOR DOMESTIC USE - TEST METHODS |
| BS ISO 13363:2004 | Rubber and plastics hoses for marine-engine wet-exhaust systems. Specification |
| BS ISO 6194-1:2007 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Nominal dimensions and tolerances |
| S.R. CEN/TS 16165:2016 | DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION |
| 08/30181467 DC : DRAFT JULY 2008 | BS EN 15834 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| BS ISO 614:2012 | Ships and marine technology. Toughened safety glass panes for rectangular windows and side scuttles. Punch method of non-destructive strength testing |
| 04/30124225 DC : DRAFT OCT 2004 | ISO/DIS 16933 - GLASS IN BUILDING - EXPLOSION-RESISTANT SECURITY GLAZING - TEST AND CLASSIFICATION BY ARENA AIR-BLAST LOADING |
| 04/30095730 DC : DRAFT APR 2004 | EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 3: FOOTWEAR HIGHLY PROTECTIVE AGAINST CHEMICALS |
| 03/318201 DC : DRAFT NOV 2003 | IEC 60502-2, ED.2 - POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (UM = 1,2 KV) UP TO 30 KV (UM = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (UM = 7,2 KV) UP TO 30 KV (UM = 36 KV) |
| 08/30172616 DC : 0 | BS EN ISO 8536-2 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| DIN ISO 6162-1:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| 14/30301958 DC : 0 | BS EN ISO 8362-2 - INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION |
| BS ISO 15082:2016 | Road vehicles. Tests for rigid plastic safety glazing materials |
| 07/30047007 DC : DRAFT AUG 2007 | BS ISO 1288-5 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 5: COAXIAL DOUBLE-RING TEST ON FLAT SPECIMENS WITH SMALL OR MEDIUM TEST SURFACE AREAS |
| 09/30184526 DC : DRAFT MAY 2009 | BS ISO 4666-3 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIQUE IN FLEXOMETER TESTING - PART 3: COMPRESSION FLEXOMETER (CONSTANT-STRAIN TYPE) |
| 07/30131694 DC : 0 | BS ISO 6194-4 - ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES |
| UNI EN ISO 19879 : 2011 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| 10/30201343 DC : 0 | BS ISO 5794-3 - RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 3: EVALUATION PROCEDURES IN A MIXED SOLUTION OF STYRENE-BUTADIENE RUBBER AND BUTADIENE RUBBER |
| 03/110543 DC : DRAFT JUNE 2003 | ISO 16939-2 - GLASS IN BUILDING - FORCED-ENTRY SECURITY GLAZING - PART 2: TEST AND CLASSIFICATION BY REPETITIVE IMPACT OF A HAMMER AND AXE AT ROOM TEMPERATURE |
| SAE J1926/3_201609 | Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 3: Light-Duty (L-Series) Stud Ends |
| PREN 14420-8 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| S.R. CEN/TS 12697-50:2016 | BITUMINOUS MIXTURES - TEST METHODS - PART 50: RESISTANCE TO SCUFFING |
| 06/30149441 DC : DRAFT SEP 2006 | ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| ISO 14903:2017 | Refrigerating systems and heat pumps — Qualification of tightness of components and joints |
| 05/30127096 DC : DRAFT FEB 2005 | ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| NF EN 15129 : 2010 | ANTI-SEISMIC DEVICES |
| 09/30193391 DC : DRAFT MAY 2009 | BS ISO 7619-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS) |
| IEC 60544-4:2003 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments |
| EN ISO 10555-6:2017 | Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports (ISO 10555-6:2015) |
| 05/30135261 DC : DRAFT JUN 2005 | ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| ONORM EN ISO 8434-1 : 2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| 06/30159668 DC : 0 | BS EN 50508 - MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS |
| NF ISO 8434-6 : 2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREES CONE CONNECTORS WITH OR WITHOUT O-RING |
| CEI EN 60544-4 : 2005 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS |
| ISO 4635:2011 | Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification |
| DIN ISO 6162-2:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51 |
| PREN 6109 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION |
| PREN 15129 : DRAFT 2017 | ANTI-SEISMIC DEVICES |
| ISO 4928:2006 | Road vehicles Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) |
| UNI CEN/TS 15901-4 : 2010 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 4: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF PAVEMENTS USING A DEVICE WITH LONGITUDINAL CONTROLLED SLIP (LFCT): TATRA RUNWAY TESTER (TRT) |
| I.S. EN ISO 23936-2:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011) |
| ISO 4927:2005 | Road vehicles — Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) |
| ISO 6118:2006 | Road vehicles Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.) |
| UNE-EN 61230:2011 | Live working - Portable equipment for earthing or earthing and short-circuiting |
| DIN EN 1081:1998-04 | RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| ISO 22762-1:2010 | Elastomeric seismic-protection isolators Part 1: Test methods |
| PREN 1097-8 : DRAFT 2016 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| I.S. EN ISO 14903:2017 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS (ISO 14903:2017) |
| XP S54 046 : 2005 XP | TYPE GROUP 0/0+ INFANT SAFETY SEATS - CARRYING FUNCTION - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 13926-3:2012 | Pen systems Part 3: Seals for pen-injectors for medical use |
| I.S. EN 12274-4:2003 | SLURRY SURFACING - TEST METHODS - PART 4: DETERMINATION OF COHESION OF THE MIX |
| UNI ISO 3387 : 2013 | RUBBER - DETERMINATION OF CRYSTALLIZATION EFFECTS BY HARDNESS MEASUREMENTS |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ISO 28706-3:2017 | Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle |
| ISO 12046:2012 | Synchronous belt drives — Automotive belts — Determination of physical properties |
| ISO 6162-2:2018 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| BS ISO 18517:2015 | Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide |
| XP CEN/TS 15901-13 : 2011 XP | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 13: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF A SIDEWAY FORCE COEFFICIENT (SFCO): THE ODOLIOGRAPH |
| ISO 23550:2011 | Safety and control devices for gas burners and gas-burning appliances General requirements |
| ISO 4666-4:2007 | Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 4: Constant-stress flexometer |
| ISO 9352:2012 | Plastics — Determination of resistance to wear by abrasive wheels |
| 17/30359853 DC : 0 | BS EN 17142 - MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| NF ISO 7619-2 : 2010 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD |
| BS ISO 8434-3:2005 | Metallic tube connections for fluid power and general use O-ring face seal connectors |
| 10/30217328 DC : 0 | BS EN 1340 - CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS |
| 13/30288859 DC : 0 | BS EN 12697-22 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
| ISO 1288-5:2016 | Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat specimens with small test surface areas |
| UNE-EN ISO 10545-4:2015 | Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014) |
| I.S. EN ISO 6149-4:2017 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017) |
| ASTM D 1415 : 2006 | Standard Test Method for Rubber Property—International Hardness |
| CEI EN 60068-2-31 : 2011 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| CEI EN 60512-7-1 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED) |
| IEC 60502-1:2004+AMD1:2009 CSV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
| ISO 5423:1992 | Moulded plastics footwear — Lined or unlined polyurethane boots for general industrial use — Specification |
| DIN EN ISO 19879:2011-01 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
| ISO 6111:1982 | Rubber footwear Lined or unlined rubber industrial boots with chemical resistance |
| ASTM F 2772 : 2011 : REDLINE | Standard Specification for Athletic Performance Properties of Indoor Sports Floor Systems |
| ISO 7076-4:2016 | Fire protection Foam fire extinguishing systems Part 4: High expansion foam equipment |
| ISO 21690:2006 | Glass in building Glass blocks Specification and test methods |
| EN 12274-5:2018 | Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance |
| ISO 6194-1:2007 | Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 1: Nominal dimensions and tolerances |
| I.S. EN 60512-7-1:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED) |
| ISO 29584:2015 | Glass in building — Pendulum impact testing and classification of safety glass |
| ISO 6162:1994 | Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series |
| ISO 15759:2005 | Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process |
| NF EN 13150 : 2001 | WORKBENCHES FOR LABORATORIES - DIMENSIONS, SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 6149-3:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006) |
| DIN EN 15330-1:2013-12 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| DIN EN ISO 6149-2:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006) |
| DIN EN 13541:2012-06 | GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST EXPLOSION PRESSURE |
| DIN EN ISO 8536-2:2010-08 | Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010) |
| BS EN ISO 8871:1997 | Elastomeric parts for aqueous parenteral preparations |
| UNE-EN 13036-4:2012 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| UNE-EN ISO 5470-1:2017 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| BS EN 1825-1:2004 | Grease separators Principles of design, performance and testing, marking and quality control |
| BS EN ISO 3822-4:1997 | Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations Mounting and operating conditions for special appliances |
| BS EN 12600:2002 | Glass in building. Pendulum test. Impact test method and classification for flat glass |
| BS EN ISO 9974-2:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with elastomeric sealing (type E) |
| BS EN 14483-2:2004 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours |
| ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
| BS EN ISO 6149-2:2007 | Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| BS EN 13071:2002 | Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste |
| BS EN ISO 8871-2 : 2004 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION |
| BS EN 858-1:2002 | Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control |
| BS EN ISO 8980-5:2005 | Ophthalmic optics. Uncut finished spectacle lenses Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant |
| BS EN ISO 19879:2010 | Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections |
| DIN EN ISO 8980-4:2006-11 | Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings (ISO 8980-4:2006) |
| CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
| EN 50508:2009 | Multi-purpose insulating sticks for electrical operations on high voltage installations |
| CEN/TS 15901-8:2009 | Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM |
| EN 12272-3:2003 | Surface dressing - Test method - Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method |
| EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
| ONORM EN ISO 12945-3 : 2014 | TEXTILES - DETERMINATION OF THE FABRIC PROPENSITY TO SURFACE PILLING, FUZZING OR MATTING - PART 3: RANDOM TUMBLE PILLING METHOD (ISO 12945-3:2014) |
| EN 60544-4:2003 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments |
| EN 12227-2 : 1999 | PLAYPENS FOR DOMESTIC USE - PART 2: TEST METHODS |
| EN 1063:1999 | Glass in building - Security glazing - Testing and classification of resistance against bullet attack |
| EN 1337-3:2005 | Structural bearings - Part 3: Elastomeric bearings |
| CEN/TS 15901-7:2009 | Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester® |
| EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| EN 12697-38:2004 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
| EN 60512-7-1:2010 | Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) |
| EN 60544-2:2012 | Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test |
| EN 60068-2-31:2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| DIN EN 14231:2003-07 | Natural stone test methods - Determination of the slip resistance by means of the pendulum tester; German version EN 14231:2003 |
| DIN EN ISO 4869-3:2007-09 | Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007); German version EN ISO 4869-3:2007 |
| DIN EN 527-3:2003-06 | OFFICE FURNITURE - WORK TABLES AND DESKS - PART 3: METHODS OF TEST FOR THE DETERMINATION OF THE STABILITY AND THE MECHANICAL STRENGTH OF THE STRUCTURE |
| DIN 19538-10:1999-12 | PIPES AND FITTINGS MADE OF CHLORINATED POLYVINYL CHLORIDE (PVC-C) FOR HOT-WATER RESISTANT WASTE AND SOIL DISCHARGE SYSTEMS INSIDE BUILDINGS - PART 10: FIRE BEHAVIOUR, QUALITY CONTROL AND INSTALLATION RECOMMENDATIONS |
| DIN EN 1825-1:2004-12 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| DIN EN 14354:2017-11 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
| DIN ISO 13926-2:2012-09 | PEN SYSTEMS - PART 2: PLUNGER STOPPERS FOR PEN-INJECTORS FOR MEDICAL USE (ISO 13926-2:2011) |
| DIN ISO 9211-4:2014-05 | Optics and photonics - Optical coatings - Part 4: Specific test methods (ISO 9211-4:2012) |
| EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| ENV 12633:2003 | Method of determination of unpolished and polished slip/skid resistance value |
| BS 3900-C3(1990) : AMD 7501 | METHODS OF TEST FOR PAINTS - THROUGH DRY TEST |
| UNE-EN 14982:2007 | Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness |
| BS 2782-3.365C(1992) : 1992 AMD 10694 | PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS |
| BS 2011-2.1ED(1992) : 1992 AMD 7920 | ENVIRONMENTAL TESTING - TESTS - FREE FALL |
| ONORM EN ISO 12311 : 2015 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15) |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| ISO 7267-2:2008 | Rubber-covered rollers Determination of apparent hardness Part 2: Shore-type durometer method |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| AS 1337.0:2020 | Personal protective equipment Eye and face protection - Vocabulary |
| ISO 7267-3:2017 | Rubber-covered rollers Determination of apparent hardness Part 3: Pusey and Jones method |
| ISO 7619-2:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method |
| ISO 7743:2017 | Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
| ISO 18898:2016 | Rubber Calibration and verification of hardness testers |
| AS 1301.420:2019 | Methods of test for pulp and paper Gurley air permeance of paper (ISO 5636-5:2013, MOD) |
| ISO/TR 9272:2005 | Rubber and rubber products Determination of precision for test method standards |
| ISO 7267-1:2017 | Rubber-covered rollers Determination of apparent hardness Part 1: IRHD method |
| ISO 18517:2015 | Rubber, vulcanized or thermoplastic Hardness testing Introduction and guide |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.