IEC 61000-6-1:2016
Current
Current
The latest, up-to-date edition.
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French, Spanish, Castilian
Published date
10-08-2016
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.IEC 61000-6-1:2016 for EMC immunity requirements applies to electrical and electronic equipment intended for use in residential, commercial, public and light-industrial locations. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified. This generic EMC immunity standard is applicable if no relevant dedicated product or product-family EMC immunity standard exists. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision.
| Committee |
TC 77
|
| DevelopmentNote |
Stability Date: 2020. (08/2016)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| CEI EN IEC 61000-6-1 : 2019 | Identical |
| I.S. EN IEC 61000-6-1:2019 | Identical |
| NEN-EN-IEC 61000-6-1: 2019 | Identical |
| VDE 0839-6-1:2019-11 | Identical |
| EN IEC 61000-6-1:2019 | Identical |
| PN-EN IEC 61000-6-1 : 2019 | Identical |
| DIN EN IEC 61000-6-1:2019-11 | Identical |
| UNE-EN IEC 61000-6-1:2019 | Identical |
| CSA IEC 61000-6-1:19 | Identical |
| IS 14700 : Part 6 : Sec 1 : 2019 | Identical |
| DS/EN IEC 61000-6-1 : 2019 | Identical |
| EN 61000-6-1:2007 | Identical |
| I.S. EN 61000-6-1:2007 | Identical |
| DIN EN 61000-6-1 : 2007 | Identical |
| VDE 0839-6-1 : 2007 | Identical |
| BS EN 61000-6-1:2007 | Identical |
| UNE-EN 61000-6-1:2007 | Identical |
| BIS IS 14700-6-1 : 2008(R2015) | Identical |
| BS EN IEC 61000-6-1:2019 | Identical |
| EN 61000-6-3 : 2007 : INC : AMD 1 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| EN 61000-1-2:2016 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
| EN 15500:2008 | Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment |
| UNE-EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
| I.S. EN 61800-3:2005 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV)) |
| EN 50486:2008 | Equipment for use in audio and video door-entry systems |
| ANSI S1.40 : 2006 : R2011 | SPECIFICATIONS AND VERIFICATION PROCEDURES FOR SOUND CALIBRATORS |
| EN 12921-1:2005+A1:2010 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
| CLC/TS 50136-4:2004 | Alarm systems - Alarm transmission systems and equipment - Part 4: Annunciation equipment used in alarm receiving centres |
| EN 61260-1:2014 | Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications |
| TS 136 113 : 13.0.0 | LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); BASE STATION (BS) AND REPEATER ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 36.113 VERSION 14.2.0 RELEASE 14) |
| EN 61260-2:2016/A1:2017 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS (IEC 61260-2:2016/A1:2017) |
| PD CLC/TR 50538:2010 | Guide to EMC Directive conformity of equipment designed for military purposes |
| NBR IEC 61400-1 : 2008 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| EN 50083-2:2012/A1:2015 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| BS PD ISO/IEC TR 29106 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING - INTRODUCTION TO THE MICE ENVIRONMENTAL CLASSIFICATION |
| UNE-EN 61000-6-5:2016 | Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment |
| EN 61131-2:2007 | Programmable controllers - Part 2: Equipment requirements and tests |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| BS EN 12921-1 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| UNI EN 14143 : 2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| BS EN 809 : 1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| ETSI TS 137 114 V17.1.0:2023-04 | Universal Mobile Telecommunications System (UMTS); LTE; Active Antenna System (AAS) Base Station (BS) Electromagnetic Compatibility (EMC) (3GPP TS 37.114 version 17.1.0 Release 17) |
| ETSI TS 136 113 V17.1.0:2023-04 | LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) and repeater ElectroMagnetic Compatibility (EMC) (3GPP TS 36.113 version 17.1.0 Release 17) |
| ETSI TS 137 113 V17.2.0:2023-07 | Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; 5G; NR, E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) Electromagnetic Compatibility (EMC) (3GPP TS 37.113 version 17.2.0 Release 17) |
| ETSI TS 138 113 V17.3.0:2023-05 | 5G; NR; Base Station (BS) ElectroMagnetic Compatibility (EMC) (3GPP TS 38.113 version 17.3.0 Release 17) |
| EN 12355:2003+A1:2010 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements |
| S.R. CLC/TS 61643-22:2016 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 22: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - SELECTION AND APPLICATION PRINCIPLES |
| CEI EN 62282-3-100 : 2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| UNE-EN 60839-11-2:2015 | Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines |
| CLC/TS 61643-22:2016 | Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles |
| EN 60146-1-1:2010 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
| EN 50438:2013 | REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS |
| EN IEC 60942:2018 | Electroacoustics - Sound calibrators |
| EN 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements |
| EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| BS EN 809:1998+A1:2009 | Pumps and pump units for liquids. Common safety requirements |
| EN 13160-1:2016 | Leak detection systems - Part 1: General Principles |
| EN 62676-1-1:2014/AC:2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL (IEC 62676-1-1:2013) |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| EN 15091:2013 | Sanitary tapware - Electronic opening and closing sanitary tapware |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| CEI EN 60146-1-1 : 2013 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| UNI EN 809 : 2009 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| CLC/TR 50373:2004 | Wind turbines - Electromagnetic compatibility |
| CLC/TS 50549-2:2015 | Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network |
| EN 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012) |
| EN 60204-33:2011 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| BS EN ISO 15971:2014 | Natural gas. Measurement of properties. Calorific value and Wobbe index |
| EN 50174-2 : 2009 AMD 2 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| UNE-EN ISO 15971:2014 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| EN 60804:2000 | Integrating-averaging sound level meters |
| UNE-EN 50491-4-1:2013 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| UNE-EN 62676-1-1:2015 | Video surveillance systems for use in security applications - Part 1-1: System requirements - General |
| UNE-EN 13160-1:2017 | Leak detection systems - Part 1: General Principles |
| BS EN 14143:2013 | Respiratory equipment. Self-contained re-breathing diving apparatus |
| UNI EN 13616 : 2004 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| BS EN 415-6:2013 | Safety of packaging machines Pallet wrapping machines |
| EN 50539-11 : 2013 AMD 1 2014 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| UNE-ISO 16110-1:2015 | Hydrogen generators using fuel processing technologies -- Part 1: Safety |
| EN 60439-1:1999/A1:2004 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| I.S. EN 12757-1:2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 50160 : 2010 AMD 1 2015 | VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
| AAMI TIR15 : 2016 | PHYSICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION |
| EN 61400-1:2005/A1:2010 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| EN 61326-1:2013 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| HD 60364-4-442:2012 | Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system |
| EN 61260:1995/A1:2001 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS |
| EN 809:1998+A1:2009 | Pumps and pump units for liquids - Common safety requirements |
| EN 13355:2004+A1:2009 | Coating plants - Combined booths - Safety requirements |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 50090-2-2:1996/A2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| PD IEC/TR 60601-4-2:2016 | Medical electrical equipment Guidance and interpretation. Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems |
| ANSI S1.40 : 2006 | SPECIFICATIONS AND VERIFICATION PROCEDURES FOR SOUND CALIBRATORS |
| BS EN 61800-3 : 2004 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS |
| EN 50270:2015 | Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| EN IEC 62933-2-1:2018 | Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification |
| UNE-EN ISO 13482:2014 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
| EN 50412-2-1 : 2005 COR 2009 | POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS |
| EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| EN 60651:1994/A2:2001 | SOUND LEVEL METERS (IEC 60651:1979/A2:2000) |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| EN 60839-11-1:2013/AC:2015 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013) |
| EN 60839-11-2:2015/AC:2015 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-2: ELECTRONIC ACCESS CONTROL SYSTEMS - APPLICATION GUIDELINES (IEC 60839-11-2:2014) |
| TS 137 113 : 13.1.0 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) (GSM); UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; E-UTRA, UTRA AND GSM/EDGE; MULTI-STANDARD RADIO (MSR) BASE STATION (BS) ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 37.113 VERSION 14.2.0 RELEASE 14) |
| HD 60364-4-443:2016 | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching |
| EN 50090-2-3:2005 | Home and Building Electronic Systems (HBES) - Part 2-3: System overview - General functional safety requirements for products intended to be integrated in HBES |
| I.S. EN 15194:2017 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| CLC/TR 50083-2-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 2-1: Electromagnetic compatibility measurements |
| EN 61800-3 : 2004 AMD 1 2012 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011) |
| BS ISO 26262-4:2011 | Road vehicles. Functional safety Product development at the system level |
| EN 60728-4:2008 | Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
| EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| EN 50491-5-2:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
| EN 12757-1:2005+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| EN 50491-4-1:2012 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| CLC/TS 50549-1:2015 | Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network above 16 A |
| TS 137 114 : 14.1.0 | UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; ACTIVE ANTENNA SYSTEM (AAS) BASE STATION (BS) ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 37.114 VERSION 14.1.0 RELEASE 14) |
| EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
| EN 61000-6-5:2015/AC:2018-01 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT (IEC 61000-6-5:2015/COR1:2017) |
| I.S. EN 62676-1-1:2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
| EN 16657:2016 | Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| CSA C61400-3 : 2011 : R2016 | WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES |
| BS EN 15500-1:2017 | Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5 |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| IEC TR 61000-2-5:2017 | Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments |
| BS EN 60204-1 : 2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| IEC 60601-1-2:2007 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
| IEC 61800-3:2017 | Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
| IEC 61204-3:2016 RLV | Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
| IEC 61000-6-4:2018 RLV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| BS EN 50539-11 : 2013 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| I.S. EN ISO 13137:2013 | WORKPLACE ATMOSPHERES - PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AND BIOLOGICAL AGENTS - REQUIREMENTS AND TEST METHODS (ISO 13137:2013) |
| ISO 14990-1:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements |
| BS EN 61000-6-3 : 2007 : INC : AMD 1 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| ISO/IEC 14763-2:2012 | Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation |
| IEC 61260-2:2016+AMD1:2017 CSV | Electroacoustics - Octave-band and fractional-octave band filters - Part 2: Pattern evaluation tests |
| ISO 4064-2:2014 | Water meters for cold potable water and hot water Part 2: Test methods |
| IEC 61400-3:2009 | Wind turbines - Part 3: Design requirements for offshore wind turbines |
| BS IEC 60533:2015 | Electrical and electronic installations in ships. Electromagnetic compatibility (EMC). Ships with a metallic hull |
| BS EN 50090-2-3:2005 | Home and building electronic systems (HBES) System overview. General functional safety requirements for products intended to be integrated in HBES |
| CAN/CSA-ISO/IEC 14543-3-6-07 (R2017) | Information Technology - Home Electronic System (HES) Architecture - Part 3-6: Media and Media Dependent Layers - Twisted Pair for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-6:2007, first edition, 2007-01) |
| DIN EN 15500-1:2016-01 (Draft) | ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
| BS ISO 17089-1:2019 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| UNE-EN ISO 13137:2014 | Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013) |
| BS EN 16657 : 2016 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS |
| BS EN 61000-6-4 : 2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| VDI 6014:2016-12 | Energy conservation by application of variable speed drives (VSD) in building services |
| BS EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Electrostatic discharge immunity test |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Safety |
| CSA C61400-3 : 2011 | WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES |
| DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
| DIN EN 453:2015-04 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| IEC 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| IEC 60533:2015 | Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
| BS EN 50491-5-2:2010 | General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
| BS ISO 3999:2004 | Radiation protection. Apparatus for industrial gamma radiography. Specifications for performance, design and tests |
| ISO/IEC 14762:2009 | Information technology Functional safety requirements for Home and Building Electronic Systems (HBES) |
| IEC 60804:2000 | Integrating-averaging sound level meters |
| IEC 61000-6-4:2018 | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| IEC 61252:1993+AMD1:2000+AMD2:2017 CSV | Electroacoustics - Specifications for personal sound exposure meters |
| IEC 61400-1:2005+AMD1:2010 CSV | Wind turbines - Part 1: Design requirements |
| BS EN 60942:2003 | Electroacoustics. Sound calibrators |
| IEC 62282-3-1:2007 | Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
| ISO/IEC 24702:2006 | Information technology Generic cabling Industrial premises |
| ISO 13482:2014 | Robots and robotic devices Safety requirements for personal care robots |
| IEC 61204-3:2016 | Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
| IEC 60755:2017 | General safety requirements for residual current operated protective devices |
| DIN EN 15091:2014-03 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| I.S. EN 1434-4:2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| DIN EN 12921-1:2011-02 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010) |
| ISO 15971:2008 | Natural gas Measurement of properties Calorific value and Wobbe index |
| DIN EN 746-2:2011-02 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| DIN EN 12043:2015-02 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 746-2:2010 | Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems |
| UNE-EN 61851-1:2012 | Electric vehicle conductive charging system - Part 1: General requirements |
| EN ISO 13137:2013 | Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013) |
| UNE-EN 62282-3-1:2011 | Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
| CSA ISO/IEC 14762 : 2010 | INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) |
| BS EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies General rules |
| IEC TR 61439-0:2013 | Low-voltage switchgear and controlgear assemblies - Part 0: Guidance to specifying assemblies |
| BS EN 50270:2015 | Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| BS EN 12041:2014 | Food processing machinery. Moulders. Safety and hygiene requirements |
| IEC 60839-11-2:2014 | Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines |
| IEC 61643-22:2015 | Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles |
| IEC 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements |
| BS EN 61400-3:2009 | Wind turbines Design requirements for offshore wind turbines |
| BS EN 50465:2015 | European product standard for combined heating power systems using gas fuel |
| ISO 26262-4:2011 | Road vehicles Functional safety Part 4: Product development at the system level |
| BS EN 50486:2008 | Equipment for use in audio and video door-entry systems |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| IEC 60204-33:2009 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| IEC 62676-1-1:2013 | Video surveillance systems for use in security applications - Part 1-1: System requirements - General |
| IEC TS 61000-1-2:2008 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
| EN 12041:2014 | Food processing machinery - Moulders - Safety and hygiene requirements |
| IEC 62236-5:2018 | Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
| IEC TS 63053:2017 | General requirements for residual current operated protective devices for DC system |
| IEC TR 61000-2-5:2017 RLV | Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments |
| IEC TR 62869:2013 | Activities and considerations related to wireless power transfer (WPT) for audio, video and multimedia systems and equipment |
| UNE-EN ISO 4064-2:2015 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
| DD IEC/TS 61000-1-2:2001 | Electromagnetic compatibility (EMC). General Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena |
| ISO/TS 20100:2008 | Gaseous hydrogen Fuelling stations |
| DIN EN 415-10:2014-07 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| UNE-EN 61400-1:2006 | Wind turbines - Part 1: Design requirements |
| IEC 61439-1:2020 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| ISO/IEC TR 29106:2007 | Information technology Generic cabling Introduction to the MICE environmental classification |
| IEC TR 61000-2-14:2006 | Electromagnetic compatibility (EMC) - Part 2-14: Environment - Overvoltages on public electricity distribution networks |
| IEC 60728-2:2018 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
| IEC 60942:2017 | Electroacoustics - Sound calibrators |
| DIN EN 1434-4:2019-08 | Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018) |
| BS EN ISO 13137:2013 | Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods |
| BS EN 15194:2017 | Cycles. Electrically power assisted cycles. EPAC Bicycles |
| EN 12043:2014 | Food processing machinery - Intermediate provers - Safety and hygiene requirements |
| BS PD IEC TS 62370 : 2004 | ELECTROACOUSTICS - INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY - ELECTROMAGNETIC AND ELECTROSTATIC COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| I.S. EN 12355:2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 3999-1:2000 | Radiation protection Apparatus for industrial gamma radiography Part 1: Specifications for performance, design and tests |
| DIN EN ISO 4064-2:2016-09 (Draft) | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
| UNE-EN 60204-1:2007 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| BS EN 61326-1:2013 | Electrical equipment for measurement, control and laboratory use. EMC requirements General requirements |
| DIN EN ISO 13137:2014-03 | Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013) |
| EN ISO 13482:2014 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
| BS EN 1434-4 : 2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| NF EN 61260-1 : 2014 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS |
| DIN EN 809:2012-10 | Pumps and pump units for liquids - Common safety requirements |
| IEEE/ANSI C63.15-2010 | American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
| EN 415-6:2013 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| BS EN 50160 : 2010 | VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
| ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
| EN ISO 4064-2:2017 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
| BS EN 61260-2 : 2016 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS |
| IEC 62236-5:2018 RLV | Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
| BS EN 60204-33:2011 | Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment |
| BS EN 61000-1-2:2016 | Electromagnetic compatibility (EMC) General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
| BS EN 12355 : 2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| IEC 62282-5-1:2012 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| DIN EN ISO 13482:2014-11 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
| UNE-EN 378-2:2017 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| BS EN 60728-4:2008 | Cable networks for television signals, sound signals and interactive services Passive wideband equipment for coaxial cable networks |
| CSA ISO/IEC 14543-3-6 : 2007 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| EN 453:2014 | Food processing machinery - Dough mixers - Safety and hygiene requirements |
| EN 60601-1-2:2015 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| UNE-EN 16657:2016 | Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks |
| EN 12110:2014 | Tunnelling machines - Air locks - Safety requirements |
| IEC TS 61000-5-10:2017 | Electromagnetic compatibility (EMC) - Part 5-10: Installation and mitigation guidelines - Guidance on the protection of facilities against HEMP and IEMI |
| ISO 3999:2004 | Radiation protection — Apparatus for industrial gamma radiography — Specifications for performance, design and tests |
| BS EN 61000-6-3 : 2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| DIN EN 13355:2010-06 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| IEC 61000-1-2:2016 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
| DIN EN 45501:2016-03 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| ISO 13137:2013 | Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods |
| BS EN 62282-3-100:2012 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| VDI/VDE 2184:2008-06 | Reliable operation and maintenance of field bus systems |
| BS EN 15500:2008 | Control for heating, ventilating and air-conditioning applications. Electronic individual zone control equipment |
| PD IEC/TR 61000-2-5:2017 | Electromagnetic compatibility (EMC) Environment. Description and classification of electromagnetic environments |
| BS EN 378-2:2016 | Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation |
| DIN EN 12016:2013-12 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| UNE-EN 62282-5-1:2013 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| PD CLC/TS 61643-22:2016 | Low-voltage surge protective devices Surge protective devices connected to telecommunications and signalling networks. Selection and application principles |
| BS EN 60839-11-1:2013 | Alarm and electronic security systems Electronic access control systems. System and components requirements |
| PD CLC/TR 50373:2004 | Wind turbines. Electromagnetic compatibility |
| PD IEC/TS 63053:2017 | General requirements for residual current operated protective devices for DC systems |
| BS EN 61000-6-5:2015 | Electromagnetic compatibility (EMC) Generic standards. Immunity for equipment used in power station and substation environment |
| BS EN 453:2014 | Food processing machinery. Dough mixers. Safety and hygiene requirements |
| BS EN 62282-5-1:2012 | Fuel cell technologies Portable fuel cell power systems. Safety |
| BS EN 50491-4-1:2012 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| BS EN 60146-1-1:2010 | Semiconductor converters. General requirements and line commutated converters Specification of basic requirements |
| DIN EN ISO 4064-2:2017-10 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
| BS EN 60601-1-2:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests |
| BS ISO 17089-1:2010 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| IEC 62820-1-1:2016 | Building intercom systems - Part 1-1: System requirements - General |
| IEC TR 60601-4-2:2016 | Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems |
| BS EN 50174-2 : 2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| ISO/PAS 19695:2015 | Motorcycles Functional safety |
| ASTM F 3278 : 2017 | Standard Performance Specification for Hand-Held Metal Detectors Used in Safety and Security |
| IEC 61260-1:2014 | Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications |
| ISO 22200:2009 | Electromagnetic compatibility Product family standard for lifts, escalators and moving walks Immunity |
| DIN EN 12355:2011-02 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| IEC 62820-3-2:2018 | Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS) |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| PD IEC/TR 61000-2-14:2006 | Electromagnetic compatibility (EMC) Environment. Overvoltages on public electricity distribution networks |
| BS EN 62820-1-1:2016 | Building intercom systems System requirements. General |
| DIN EN 14143:2013-10 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| BS EN 12110:2014 | Tunnelling machines. Air locks. Safety requirements |
| PD IEC/TR 62869:2013 | Activities and considerations related to wireless power transfer (WPT) for audio, video and multimedia systems and equipment |
| BS ISO 14990-1:2016 | Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements |
| BS EN 12757-1 : 2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 12110:2003-05 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| CSA C61400-1 : 2014 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| DD CEN ISO/TS 14907-1:2010 | Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures |
| DD ISO/TS 20100:2008 | Gaseous hydrogen. Fuelling stations |
| BS EN 61252 : 1997 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
| ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
| BS EN 62676-1-1:2014 | Video surveillance systems for use in security applications System requirements. General |
| PD ISO/PAS 19695:2015 | Motorcycles. Functional safety |
| CSA C900.4 : 2013 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| BS EN 61400-1 : 2005 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| PD IEC/TS 61000-5-10:2017 | Electromagnetic compatibility (EMC) Installation and mitigation guidelines. Guidance on the protection of facilities against HEMP and IEMI |
| ASTM F 3020 : 2016 | Performance Standard for Hand-Worn Metal Detectors Used in Safety and Security |
| ISO/IEC 14543-3-6:2007 | Information technology Home electronic system (HES) architecture Part 3-6: Media and media dependent layers Network based on HES Class 1, twisted pair |
| DIN EN 15500:2008-12 | CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT |
| BS EN 50412-2-1:2005 | Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Residential, commercial and industrial environment - Immunity requirements |
| BS EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device |
| CSA ISO/IEC 14543-3-6 : 2007 : R2012 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| BS EN 60439-1:1999 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies |
| EN 14143:2013 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN 1434-4:2015 | Heat meters - Part 4: Pattern approval tests |
| EN 378-2:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| ISO 17089-1:2010 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
| IEC 62103:2003 | Electronic equipment for use in power installations |
| BS EN 61260-1:2014 | Electroacoustics. Octave-band and fractional-octave-band filters Specifications |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| DIN EN 12757-1:2011-02 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010) |
| UNE-EN 809:1999 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| BS EN ISO 13482:2014 | Robots and robotic devices. Safety requirements for personal care robots |
| IEC 61131-2:2017 | Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
| I.S. EN 50160:2010 | VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
| CSA C22.2 No. 61980-1 : 2016 | ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| IEC 60728-4:2007 | Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
| BS EN 415-10:2014 | Safety of packaging machines General Requirements |
| BS EN 60839-11-2:2015 | Alarm and electronic security systems Electronic access control systems. Application guidelines |
| I.S. EN ISO 4064-2:2017 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
| ANSI/AAMI/IEC 60601-1-2:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| UNI EN 12355 : 2010 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13160-1:2003 | Leak detection systems General principles |
| DIN EN ISO 15971:2014-09 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| VDI 3551:2011-01 | Electromagnetic compatibility (EMC) in building services |
| BS EN 12043:2014 | Food processing machinery. Intermediate provers. Safety and hygiene requirements |
| IEC 61326-1:2012 RLV | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
| UNE-EN 15091:2014 | Sanitary tapware - Electronic opening and closing sanitary tapware |
| UNE-EN 14143:2014 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| DIN EN 12110:2014-10 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| BS EN 12016:2013 | Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity |
| BS EN 50133-1:1997 | Alarm systems. Access control systems for use in security applications System requirements |
| PD CLC/TR 50083-2-1:2014 | Cable networks for television signals, sound signals and interactive services Electromagnetic compatibility measurements |
| DIN EN 1434-4:2016-02 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| BS EN 61851-1:2011 | Electric vehicle conductive charging system General requirements |
| EN 14351-1:2006+A2:2016 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets |
| EN 12016:2013 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| UNE-EN 415-6:2014 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| BS EN 60204-32:2008 | Safety of machinery. Electrical equipment of machines Requirements for hoisting machines |
| DIN EN 415-6:2013-09 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| BS EN 50090-2-2 : 1997 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| IEC 60942:2017 RLV | Electroacoustics - Sound calibrators |
| DIN EN 12041:2015-02 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 61260:1996 | Electroacoustics. Octave-band and fractional-octave-band filters |
| IEC 62282-3-201:2017 | Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems |
| BS EN 61547:2009 | Equipment for general lighting purposes. EMC immunity requirements |
| BS EN 50438:2013 | Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks |
| UNE-EN 61439-1:2012 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| IEC 60533:2015 RLV | Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
| IEC TS 62370:2004+AMD1:2017 CSV | Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures |
| BS EN 50083-2 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| DD CLC/TS 50136-4:2004 | Alarm systems. Alarm transmission systems and equipment Annunciation equipment used in alarm receiving centres |
| EN 50465:2015 | Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW |
| UNE-EN 50083-2:2013 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
| UNE-EN 50160:2011 | Voltage characteristics of electricity supplied by public electricity networks |
| BS EN 14351-1 : 2006 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS |
| UNE-EN 45501:2016 | Metrological aspects of non-automatic weighing instruments |
| UNE-EN 1434-4:2016 | Heat meters - Part 4: Pattern approval tests |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements |
| IEC 63044-5-2:2017 | Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments |
| IEC TS 60204-34:2016 | Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools |
| IEC 60839-11-1:2013 | Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements |
| UNE-EN 1539:2010 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| IEC 60364-4-44:2007+AMD1:2015+AMD2:2018 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| IEC 62041:2017 | Transformers, power supplies, reactors and similar products - EMC requirements |
| BS EN 62282-3-1:2007 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| PD IEC/TR 61439-0:2013 | Low-voltage switchgear and controlgear assemblies Guidance to specifying assemblies |
| BS EN 60804:2001 | Integrating-averaging sound level meters |
| IEC 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| BS EN 61131-2:2007 | Programmable controllers Equipment requirements and tests |
| BS EN ISO 4064-2:2017 | Water meters for cold potable water and hot water Test methods |
| IEC 62933-2-1:2017 | Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| BS EN 15091:2013 | Sanitary tapware. Electronic opening and closing sanitary tapware |
| CAN/CSA-IEC 61000-6-5:18 | Electromagnetic compatibility (EMC) — Part 6-5: Generic standards — Immunity for equipment used in power station and substation environment (Adopted IEC 61000-6-5:2015, first edition, 2015-08) | Compatibilité électromagnétique (CEM) — Partie 6-5 : Normes génériques — Immunité pour les équipements utilisés dans les environnements de centrales électriques et de postes (norme IEC 61000-6-5:2015 adoptée, première édition, 2015-08) |
| I.S. EN 15500-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
| I.S. EN 61131-2:2007 | PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
| CAN/CSA-IEC 61000-4-2:12 (R2017) | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test (Adopted IEC 61000-4- 2:2008, second edition, 2008-12) | Compatibilité électromagnétique (CEM) - Partie 4-2: Techniques d\'essai et de mesure - Essai d\'immunité aux décharges électrostatiques (norme CEI 61000-4-2:2008 adoptée, deuxième édition, 2008-12) |
| CSA IEC 61000.4.2 : 2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
| CEI EN IEC 61543:2023 | Residual current-operated protective devices (RCDs) for household and similar use. Electromagnetic compatibility |
| EN 61400-3:2009 | Wind turbines - Part 3: Design requirements for offshore wind turbines |
| I.S. EN 12621:2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| I.S. EN 746-2:2010 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| UNI EN 746-2 : 2011 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| S.R. CLC/TR 50538:2010 | |
| I.S. EN 61439-1:2011 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011) |
| S.R. CLC/TR 50083-2-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2-1: ELECTROMAGNETIC COMPATIBILITY MEASUREMENTS |
| UNE-EN 12757-1:2006+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| EN ISO 15971:2014 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| IEEE/ANSI C63.27-2017 | American National Standard for Evaluation of Wireless Coexistence |
| I.S. EN 62282-3-100:2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV)) |
| I.S. EN 61000-6-5:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT |
| BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 61000-4-2:2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
| I.S. EN 50465:2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| I.S. EN 13616-1:2016 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE |
| I.S. EN 12043:2014 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61851-1:2011 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 14351-1:2006 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND/OR SMOKE LEAKAGE CHARACTERISTICS |
| CSA C22.2 No. 60601.1.2 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| I.S. EN 60204-32:2008 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| I.S. EN IEC 62933-2-1:2018 | ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION |
| S.R. HD 60364-4-443:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-44: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES - CLAUSE 443: PROTECTION AGAINST TRANSIENT OVERVOLTAGES OF ATMOSPHERIC ORIGIN OR DUE TO SWITCHING |
| I.S. EN 13160-1:2016 | LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| I.S. EN 13355:2005 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| S.R. CLC/TS 50549-2:2015 | REQUIREMENTS FOR GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH DISTRIBUTION NETWORKS - PART 2: CONNECTION TO A MV DISTRIBUTION NETWORK |
| DIN EN 13616:2004-09 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| S.R. CLC/TS 50549-1:2015 | REQUIREMENTS FOR GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH DISTRIBUTION NETWORKS - PART 1: CONNECTION TO A LV DISTRIBUTION NETWORK ABOVE 16 A |
| I.S. EN 12921-1:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| I.S. EN 50083-2:2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| UNE-EN 61000-4-2:2010 | Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| ETSI TS 138 114 V17.3.0:2023-10 | 5G; NR; Repeaters ElectroMagnetic Compatibility (EMC) (3GPP TS 38.114 version 17.3.0 Release 17) |
| I.S. EN 13616:2004 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| I.S. EN 60204-1:2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61547:2009 | EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS |
| I.S. EN 12110:2014 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50438:2013 | REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS |
| I.S. EN 62820-1-1:2016 | BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
| I.S. EN 60839-11-2:2015 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-2: ELECTRONIC ACCESS CONTROL SYSTEMS - APPLICATION GUIDELINES |
| I.S. EN 61400-1:2005 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| IEEE/ANSI N42.55-2013 | American National Standard for the Performance of Portable Transmission X-Ray Systems for Use in Improvised Explosive Device and Hazardous Device Identification |
| CLC/TR 50538:2010 | Guide to EMC Directive conformity of equipment designed for military purposes |
| UNE-EN 60839-11-1:2014 | Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements |
| IEEE/ANSI C63.18-2014 | American National Standard Recommended Practice for an On-Site, Ad Hoc Test Method for Estimating Electromagnetic Immunity of Medical Devices to Radiated Radio-Frequency (RF) Emissions from RF Transmitters |
| TS 136 124 : 13.1.0 | LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TS 36.124 VERSION 14.1.0 RELEASE 14) |
| I.S. EN 60942:2003 | ELECTROACOUSTICS - SOUND CALIBRATORS |
| I.S. EN 14143:2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| UNE-EN 14351-1:2006 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics |
| I.S. EN 12016:2013 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY |
| I.S. EN 61000-6-4:2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| UNE-EN 12757-1:2006 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| I.S. EN 61000-6-3:2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006 (EQV)) |
| I.S. EN 50539-11:2013 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| I.S. EN 12041:2014 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 61326-1:2013 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012 (EQV)) |
| I.S. EN 809:1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNE-EN 12016:2014 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| I.S. EN 415-6:2013 | SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES |
| I.S. EN 60146-1-1:2010 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
| I.S. EN 15500:2008 | CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT |
| CEI EN IEC 61439-1:2022 | Low-voltage switchgear and controlgear assemblies Part 1: General rules |
| I.S. EN 15091:2013 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| I.S. EN 378-2:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| I.S. EN 50090-2-2:1998 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| I.S. EN 61260-2:2016 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS |
| I.S. EN 50270:2015 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| I.S. EN 60601-1-2:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| I.S. CWA 14642:2003 | CEN WORKSHOP AGREEMENT (CWA) - ELECTRICAL INTERFACE FOR DOMESTIC COGENERATION - REQUIREMENTS FOR DISTRIBUTION NETWORK CONNECTION FOR MICRO COGENERATION SYSTEMS FOR DOMESTIC USE UP TO 16 A PER PHASE IN LOW-VOLTAGE DISTRIBUTION NETWORKS |
| I.S. EN IEC 61543:2023/A11:2023 | Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility |
| UNE-EN 61547:2011 | Equipment for general lighting purposes - EMC immunity requirements |
| UNI EN 15091 : 2014 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| I.S. EN 50174-2:2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| EN 15500-1:2017 | Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5 |
| I.S. EN 60839-11-1:2013 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS |
| BS EN 13355 : 2004 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| I.S. EN 453:2014 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| IEC 61000-4-19:2014 | Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
| IEC GUIDE 107:2014 | Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications |
| IEC 61000-4-22:2010 | Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emissions and immunity measurements in fully anechoic rooms (FARs) |
| IEC 61000-4-1:2006 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| SA TR IEC 61000.2.5:2019 | Electromagnetic compatibility (EMC) Environment - Description and classification of electromagnetic environments |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| AS/NZS IEC 60839.11.1:2019 | Alarm and electronic security systems Electronic access control systems - System and components requirements |
| IEC TR 61000-2-5:2017 | Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| IEC 61000-4-31:2016 | Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test |
| AS IEC 61260.2:2019 | Electroacoustics - Octave-band and fractional-octave-band filters Pattern evaluation tests |
| AS/NZS 62676.1.1:2020 | Video surveillance systems for use in security applications System requirements - General (IEC 62676-1-1:2013, MOD) |
| IEC TR 61000-1-6:2012 | Electromagnetic compatibility (EMC) - Part 1-6: General - Guide to the assessment of measurement uncertainty |
| IEC 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| AS/NZS IEC 60839.11.2:2019 | Alarm and electronic security systems Electronic access control systems - Application guidelines |
| IEC 61000-4-29:2000 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
| IEC 61000-4-18:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
| IEC 61000-4-21:2011 | Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
| IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV | Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests |
| IEC 61000-4-34:2005+AMD1:2009 CSV | Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
| AS IEC 61260.1:2019 | Electroacoustics - Octave-band and fractional-octave-band filters Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.