SAE MS 1003 : 2018
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION |
DIN EN 10245-5:2012-01
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
DIN EN ISO 21509 E : 2015
|
PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS (ISO 21509:2006) |
BS EN 62444:2013
|
Cable glands for electrical installations |
UNE-EN 50180-2:2015
|
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
UNE-EN 16261-3:2014
|
Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods |
UNE-EN 50290-2-29:2016
|
Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables |
I.S. EN 62790:2015
|
JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS |
06/30153650 DC : DRAFT JULY 2006
|
EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
I.S. EN 10329:2006
|
STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
09/30201918 DC : 0
|
BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS |
BS EN 15651-2:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for glazing |
UNE-EN 50290-2-33:2016
|
Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable) |
07/30160665 DC : 0
|
BS EN 12790 - CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
DIN EN 16265:2016-05
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
12/30212874 DC : 0
|
BS EN ISO 6808 - PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION |
13/30240164 DC : 0
|
BS ISO 16365-1 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
DIN EN 16805 E : 2016
|
DIVING EQUIPMENT - DIVING MASK - REQUIREMENTS AND TEST METHODS |
I.S. EN 14035-35:2004
|
FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
I.S. EN ISO 21809-3:2016
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
BS 5664-2.1(1979) : 1979
|
SOLVENTLESS POLYMERISABLE RESINOUS COMPOUNDS USED FOR ELECTRICAL INSULATION - METHODS OF TEST |
I.S. EN 14483-4:2004
|
VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL |
CEI EN 50290-2-25 : 2014
|
COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
BS ISO 10931-1:1997
|
Plastics piping systems for industrial applications. Poly (vinylidene fluoride) General |
BS ISO 20753 : 2008
|
PLASTICS - TEST SPECIMENS |
14/30313364 DC : 0
|
BS ISO 19861 - BUILDINGS AND CIVIL ENGINEERING WORKS SEALANTS - DETERMINATION OF CURING BEHAVIOR |
I.S. EN ISO 21509:2015
|
PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS (ISO 21509:2006) |
DIN EN ISO 21509:2015-10
|
PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS (ISO 21509:2006) |
PREN 1504-2 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
IEC 60544-4:2003
|
Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments |
SAE MS 1002 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE C (GEARS) SPECIFICATION |
VDE 0212-2 : 1999
|
OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
DD CEN/TS 15185:2005
|
Furniture. Assessment of the surface resistance to abrasion |
BS 903-A57:1989
|
Physical testing of rubber Determination of indentation hardness by means of pocket hardness meters |
DIN EN 16263-4:2015-11
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS |
00/560662 DC : DRAFT JAN 2000
|
PREN 13832 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS |
CEI EN 50290-2-29 : 2002
|
COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES |
DIN EN 13832-2:2006-11
|
FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
NFC 33 009-2 : 2008
|
ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
PD EN 14035-8:2004
|
Fireworks Bengal sticks. Specification and test methods |
BS ISO 19861:2015
|
Buildings and civil engineering works. Sealants. Determination of curing behaviour |
BS IEC 62790 : 2014
|
JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS |
I.S. EN 1466:2014
|
CHILD USE AND CARE ARTICLES - CARRY COTS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN ISO 28706-4:2016-07
|
VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL (ISO 28706-4:2016) |
DIN EN 16256-5:2013-03
|
PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS |
05/30137738 DC : DRAFT AUG 2005
|
ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
S.R. CEN/TS 16165:2016
|
DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION |
SAE MS 1000 : 2013
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
I.S. EN 61076-7-100:2006
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
UNE-EN ISO 21509:2016
|
Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006) |
BS ISO 13628-10 : 2005 AMD 16775
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
CEI EN 61076-7-100 : 2007
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
CEI EN 60544-2 : 2013
|
ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST |
CEI EN 50290-2-33 : 1ED 2017
|
COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION COMPOUNDS FOR MULTI ELEMENT METALLIC CABLES FOR INDOOR INSTALLATION (DATA CABLE) |
DIN EN 15655:2016-07 (Draft)
|
DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
DIN EN 13832-3:2006-11
|
FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
DIN EN 124-1 E : 2015
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS |
I.S. EN 61215-2:2017
|
TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 2: TEST PROCEDURES |
API SPEC 17J : 2014
|
SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
I.S. CEN TS 15185:2006
|
FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
I.S. EN 60684-3-214:2014
|
FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, NOT FLAME RETARDED, THICK AND MEDIUM WALL |
I.S. EN 50290-2-35:2016
|
COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND |
BS EN 50290-2-21 : 2002
|
COMMUNICATION CABLES - PART 2-21: COMMON DESIGN RULES AND CONSTRUCTION - PVC INSULATION COMPOUNDS |
I.S. EN 62631-3-1:2016
|
DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-1: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - VOLUME RESISTANCE AND VOLUME RESISTIVITY - GENERAL METHOD |
I.S. EN 15651-4:2017
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
BS EN 50548 : 2011
|
JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
ISO 28278-1:2011
|
Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing |
CEI EN 60684-3-247 : 2012
|
FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL |
I.S. EN 14035-5:2006
|
FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
I.S. HD 631.2:2007
|
ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
ISO 16365-1:2014
|
Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications |
HD 631.2 : 2007
|
ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
I.S. EN 50548:2011
|
JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
EN 60455-3-8:2013
|
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
DIN EN ISO 20753 E : 2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
17/30359554 DC : 0
|
BS EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS |
I.S. EN 50655-1:2017
|
ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
16/30347811 DC : 0
|
BS EN 14187-5 - COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS |
UNE-EN 15651-4:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways |
ISO/TS 11819-3:2017
|
Acoustics Measurement of the influence of road surfaces on traffic noise Part 3: Reference tyres |
I.S. EN 50290-2-23:2013
|
COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |
ISO 21809-1:2011
|
Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) |
DIN EN ISO 20753:2014-07
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
DIN EN 71-4:2013-05
|
Safety of toys - Part 4: Experimental sets for chemistry and related activities |
DIN EN 1504-2:2015-03 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
EN 13121-1:2003
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS |
BS EN 14879-2:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
BS EN ISO 13628-2:2006
|
Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
BS EN 12259-3:2000
|
Fixed firefighting systems. Components for sprinkler and water spray systems Dry alarm valve assemblies |
BS EN 14035-6:2004
|
Fireworks Bengal flames. Specification and test methods |
BS EN 14035-35:2004
|
Fireworks Throwdowns. Specification and test methods |
IEC 60684-3-247:2011+AMD1:2016 CSV
|
Flexible insulating sleeving - Part 3 Specifications for individual types of sleeving - Sheet 247: Heatshrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall |
BS EN 295-3:2012
|
Vitrified clay pipe systems for drains and sewers Test methods |
BS EN 13893:2002
|
Resilient, laminate and textile floor coverings. Measurement of dynamic coefficient of friction on dry floor surfaces |
BS EN 14879-5:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
DIN EN 14035-35:2005-02
|
FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
DIN EN ISO 6808:2000-11
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
DIN EN 14782:2006-03
|
Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
ONORM EN ISO 13000-2 : 2006
|
PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
CEN/TS 16354:2013
|
Laminate floor coverings - Underlays - Specification, requirements and test methods |
EN ISO 20344:2011
|
Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
DIN ISO 5355:2006-05
|
ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
EN 12961:2001/A1:2005
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF OPTIMUM ACTIVATION TEMPERATURES AND MAXIMUM ACTIVATION LIFE OF SOLVENT-BASED AND DISPERSION ADHESIVES |
EN 61076-7-100 : 2006
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
DIN ISO 6265:2013-09
|
ALPINE SKIS - DETERMINATION OF DEFORMATION LOAD AND BREAKING LOAD (ISO 6265:2013) |
EN 62444 : 2013
|
CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
EN 50290-2-37:2016
|
Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables |
EN 50290-2-22 : 2001 AMD 1 2007
|
COMMUNICATION CABLES - PART 2-22: COMMON DESIGN RULES AND CONSTRUCTION - PVC SHEATHING COMPOUNDS |
EN 10245-1:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
DIN EN 15062:2006-08
|
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
DIN EN 14879-4:2008-01
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
CEN/TS 15185 : 2005
|
FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
EN 50290-2-29:2016
|
Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables |
EN 13036-3:2002
|
Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability |
EN 10245-2:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
DIN EN 14879-2:2007-02
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
EN 10289:2002
|
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
EN 50655-1:2017
|
Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds |
EN 10245-5:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
EN 12488:2016
|
Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing |
EN 12259-3:2000/A2:2005
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 3: DRY ALARM VALVE ASSEMBLIES |
EN 50290-2-25:2013
|
COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
EN 12790:2009
|
Child use and care articles - Reclined cradles |
EN 50180-2:2015
|
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
DIN EN 15189:2007-02
|
Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
ONORM EN ISO 23936-1 : 2009
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
I.S. EN 14865-2:2006
|
RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
EN 50368:2003
|
Cable cleats for electrical installations |
ONORM EN 12790 : 2009
|
CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
DIN EN 13696:2009-02
|
WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
DIN EN 14035-10:2004-11
|
FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS |
UNE-EN 50290-2-23:2014
|
Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
BS EN 61854:1998
|
Overhead lines. Requirements and tests for spacers |
BS ISO 21509 : 2006
|
PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS |
I.S. EN 15651-2:2017
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
BS EN 16805:2015
|
Diving equipment. Diving mask. Requirements and test methods |
07/30149374 DC : 0
|
BS EN 15673-1 - DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHOD OF EVALUATION - PART 1: REFERENCE METHOD |
DIN EN 14035-31:2006-01
|
FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
18/30363862 DC
|
BS ISO 8124-10. Safety of toys Part 10. Experimental sets for chemistry and related activities |
07/30161895 DC : 0
|
BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
I.S. EN 60544-4:2003
|
ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS |
14/30300605 DC : 0
|
BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
CEI EN 62217 : 2013
|
POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
BS EN 50290-2-23:2013
|
Communication cables Common design rules and construction. Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
BS EN 50180-2:2015
|
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Requirement for bushing components |
PD EN 14035-3:2004
|
Fireworks Aerial wheels. Specification and test methods |
ASTM F 2870 : 2016 : REDLINE
|
Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire |
I.S. EN 16523-1:2015
|
DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
BS EN ISO 25649-1:2017
|
Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods |
DIN EN 15651-3:2016-10 (Draft)
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
CEI EN 50290-2-35 : 1ED 2017
|
COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND |
BS EN 10245-5:2011
|
Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire |
I.S. EN 62444:2013
|
CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010 (MOD)) |
BS ISO 7619-1:2010
|
Rubber, vulcanized or thermoplastic. Determination of indentation hardness Durometer method (Shore hardness) |
PREN 62444 : DRAFT 2013
|
CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
I.S. EN 50180-2:2015
|
BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
BS EN 62631-3-1:2016
|
Dielectric and resistive properties of solid insulating materials Determination of resistive properties (DC methods). Volume resistance and volume resistivity. General method |
DIN EN 15651-1:2016-10 (Draft)
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
98/123516 DC : DRAFT JULY 1998
|
PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS |
BS EN 61076-7-100:2006
|
Connectors for electronic equipment. Product requirements Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system |
DIN EN 16264:2014-11
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
NF EN ISO 23936-1 : 2010
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
UNI EN 15655 : 2009
|
DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
DIN EN 15655 E : 2009
|
DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
PREN 50655-1 : DRAFT 2015
|
ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
09/30200146 DC : 0
|
BS EN ISO 20344 - PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR |
17/30365113 DC : 0
|
BS EN 60455-3-8 ED.2.0 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
DIN EN 16028:2012-10
|
Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
BS ISO 11393-5:2001
|
Protective clothing for users of hand-held chain-saws Test methods and performance requirements for protective gaiters |
BS ISO 17194:2007
|
Structural adhesives. A standard database of properties |
DIN EN 15651-4:2016-10 (Draft)
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
15/30297361 DC
|
BS ISO 26261-3. Fireworks. Category 4. Part 3. Test methods |
PD EN 14035-13:2004
|
Fireworks Flash pellets. Specification and test methods |
BS EN 15551:2017
|
Railway applications. Railway rolling stock. Buffers |
I.S. EN 14035-31:2005
|
FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
BS 2782-3 Method 365C:1986
|
Methods of testing plastics. Mechanical properties Determination of Rockwell hardness |
ISO 20753:2008
|
Plastics Test specimens |
UNE-EN 50290-2-25:2014
|
Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds |
BS ISO 22498:2005
|
Plastics. Vinyl chloride homopolymer and copolymer resins. Particle size determination by mechanical sieving |
05/30131064 DC : DRAFT MAR 2005
|
EN 15189:2005 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
I.S. EN 50290-2-29:2016
|
COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES |
16/30340626 DC : 0
|
BS EN 15655 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
03/319405 DC : DRAFT NOV 2003
|
BS EN 14035-37 - FIREWORKS - PART 37: WHISTLERS - SPECIFICATION AND TEST METHODS |
DIN ISO 9838:2016-08
|
ALPINE AND TOURING SKI-BINDINGS - TEST SOLES FOR SKI-BINDING TESTS (ISO 9838:2015) |
S.R. CWA 15756:2007
|
HUMANITARIAN MINE ACTION (HMA) - PERSONAL PROTECTIVE EQUIPMENT (PPE) - TEST AND EVALUATION |
BS ISO 14910-2 : 1997 AMD 16024
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN 71-13:2014-07
|
Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
UNI CEN ISO/TS 24817 : 2011
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
BS EN 15651-3:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for sanitary joints |
BS EN 50655-1:2017
|
Electric cables. Accessories. Material characterization Fingerprinting for resinous compounds |
I.S. EN 50290-2-37:2016
|
COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
UNE-EN 16264:2015
|
Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools |
UNI EN 71-4 : 2013
|
SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
ISO 20029-2:2017
|
Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties |
CEI EN 50290-2-37 : 1ED 2017
|
COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
CEI EN 61854 : 2000
|
OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
I.S. EN 50262:1999
|
METRIC CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
I.S. EN 124-1:2015
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS |
ANSI/AAMI/ISO 15676:2016
|
CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO) |
ISO 9838:2015
|
Alpine and touring ski-bindings Test soles for ski-binding tests |
I.S. EN 50290-2-33:2016
|
COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION COMPOUNDS FOR MULTI ELEMENT METALLIC CABLES FOR INDOOR INSTALLATION (DATA CABLE) |
EN 13832-1:2006
|
Footwear protecting against chemicals - Part 1: Terminology and test methods |
CEI EN 60455-3-8 : 2014
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
DIN EN 16523-2 E : 2015
|
DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
CEI EN 50290-2-38 : 1ED 2017
|
COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION FOR COAXIAL CABLES |
I.S. EN 12488:2016
|
GLASS IN BUILDING - GLAZING RECOMMENDATIONS - ASSEMBLY PRINCIPLES FOR VERTICAL AND SLOPING GLAZING |
PREN 16354 : DRAFT 2016
|
LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
BS EN 1466:2014
|
Child use and care articles. Carry cots and stands. Safety requirements and test methods |
BS EN 15947-4 : 2016
|
PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS |
16/30333219 DC : 0
|
BS EN 16354 - LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
EN 16523-2:2015
|
Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact |
PREN 1466 : DRAFT 2013
|
CHILD USE AND CARE ARTICLES - CARRY COTS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS |
SAE MS 1005 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION |
I.S. EN ISO 12736:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
I.S. EN 16028:2012
|
RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
CEI EN 62444 : 2014
|
CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
ASTM D 4000 : 2016 : REDLINE
|
Standard Classification System for Specifying Plastic Materials |
EN 13832-2:2006
|
Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
ASTM D 5963 : 2004 : R2010 : EDT 1
|
Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
IEC 62677-3-101:2018
|
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications |
IEC 62899-201:2016
|
Printed electronics - Part 201: Materials - Substrates |
DIN EN 14879-4 E : 2008
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 4: LININGS ON METALLIC COMPONENTS |
DIN EN 1392:2006-08
|
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
DIN EN 14879-5 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 5: LININGS ON CONCRETE COMPONENTS |
DIN EN 15434 E : 2010
|
GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
DIN EN 15346 E : 2015
|
PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
DIN EN 14294:2010-06
|
Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
DIN EN 14782:2015-09 (Draft)
|
SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
DIN EN 14354:2005-03
|
WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
ISO/TS 24817:2006
|
Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection |
BS EN 295-4:2013
|
Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings |
BS EN ISO 20344:2011
|
Personal protective equipment. Test methods for footwear |
UNE-EN ISO 20344:2012
|
Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
BS EN 12790:2009
|
Child use and care articles. Reclined cradles |
EN 61854:1998
|
Overhead lines - Requirements and tests for spacers |
BS EN 14782:2006
|
Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements |
BS EN 15307:2014
|
Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements |
BS EN 71-4:2013
|
Safety of toys Experimental sets for chemistry and related activities |
I.S. EN 15346:2014
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
DIN EN 14035-24:2004-11
|
FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
I.S. EN ISO 13628-2:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
I.S. EN ISO 13000-2:2006
|
PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN ISO 9523:2016-05
|
TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS (ISO 9523:2015) |
I.S. EN 12790:2009
|
CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
I.S. EN 10245-2:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
I.S. EN 71-4:2013
|
SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
DIN EN 14035-25:2006-01
|
FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
DIN EN 14035-28:2004-11
|
FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS |
I.S. EN ISO 20344:2011
|
PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011) |
I.S. EN 10245-1:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
DIN EN 14035-22:2004-11
|
FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS |
DIN EN 14035-8:2004-11
|
FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS |
DIN EN 14035-7:2004-11
|
FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS |
ONORM ISO 5355 : 2006
|
ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
I.S. EN 10245-4:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
I.S. EN 295-3:2012
|
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS |
DIN EN 14035-6:2004-11
|
FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS |
I.S. EN 1392:2006
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS |
I.S. EN ISO 2898-2:2008
|
PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN 14035-9:2004-11
|
FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS |
DIN EN 14035-5:2006-05
|
FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
I.S. EN 15307:2014
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
EN 71-4:2013
|
Safety of toys - Part 4: Experimental sets for chemistry and related activities |
DIN EN 14035-3:2004-11
|
FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS |
I.S. EN 14354:2017
|
WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
ONORM EN 71-4 : 2013
|
SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
I.S. EN 15468:2016
|
LAMINATE FLOOR COVERINGS - ELEMENTS WITH DIRECTLY APPLIED PRINTING AND RESIN SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
I.S. EN 14294:2010
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
I.S. EN 295-4:2013
|
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
DIN EN 13832-1:2006-11
|
FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
I.S. EN ISO 6808:2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
I.S. EN 15434:2006
|
GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
DIN EN 14035-38:2006-05
|
FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS |
VDI 3388:2012-03
|
Materials for trimming and forming dies |
BS 3412:1992
|
Methods of specifying general purpose polyethylene materials for moulding and extrusion |
VDI 2083 Blatt 9.2:2017-01
|
Cleanroom technology - Consumables in the cleanroom |
ASME PCC 2 : 2015
|
REPAIR OF PRESSURE EQUIPMENT AND PIPING |
VDI/VDE 2616 Blatt 2:2014-07
|
Hardness testing of plastics and elastomers |
BS 7933-1:2007
|
Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds |
OVE/ONORM EN 60455-3-8 : 2014
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013) |
UNE-EN 124-1:2015
|
Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods |
UNE-EN 71-13:2015
|
Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
DIN ISO 6265 E : 2013
|
ALPINE SKIS - DETERMINATION OF DEFORMATION LOAD AND BREAKING LOAD (ISO 6265:2013) |
DIN EN 71-13 E : 2014
|
SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
ISO 9475:1994
|
Aircraft inner tube and tubeless tyre valves Cores and caps Test methods |
BS EN 50617-1:2015
|
Railway applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system Track circuits |
UNI ISO 7619-2 : 2011
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD |
15/30325650 DC : 0
|
BS EN 50655-1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
03/319403 DC : DRAFT NOV 2003
|
BS EN 14035-31 - FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
I.S. EN ISO 25649-1:2017
|
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017) |
BS EN 50290-2-33:2016
|
Communication cables Common design rules and construction. Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable) |
I.S. EN 14035-25:2005
|
FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
BS ISO 6265:2013
|
Alpine skis. Determination of deformation load and breaking load |
13/30281390 DC : 0
|
BS EN 50290-2-25 - COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
07/30083514 DC : 0
|
BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
UNE-EN ISO 28706-4:2016
|
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016) |
UNE-EN 15651-1:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements |
10/30191247 DC : DRAFT APR 2010
|
BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
BS EN 50290-2-22:2002
|
Communication cables Common design rules and construction. PVC sheathing compounds |
BS EN 60455-3-8:2013
|
Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories |
BS EN 62790:2015
|
Junction boxes for photovoltaic modules. Safety requirements and tests |
09/30214460 DC : 0
|
BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
I.S. EN 16261-3:2012
|
PYROTECHNIC ARTICLES - FIREWORKS, CATEGORY 4 - PART 3: TEST METHODS |
BS EN 16263-4:2015
|
Pyrotechnic articles. Other pyrotechnic articles Test methods |
PD CEN/TR 14548:2003
|
Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
BS EN 16265:2015
|
Pyrotechnic articles. Other pyrotechnic articles. Ignition devices |
PD EN 14035-21:2005
|
Fireworks Jumping ground spinners. Specification and test methods |
11/30187339 DC : 0
|
BS EN ISO 12736 - PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES |
15/30313584 DC : 0
|
BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
BS ISO 27668-1:2017
|
Gel ink ball pens and refills General use |
BS EN ISO 28706-4:2016
|
Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel |
BS EN 60455-2:2015
|
Resin based reactive compounds used for electrical insulation Methods of test |
BS EN 60544-2:2012
|
Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test |
16/30336762 DC : 0
|
BS EN 50290-2-29 - COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES |
13/30282435 DC : 0
|
BS EN 1466 - CHILD USE AND CARE ARTICLES - CARRY COTS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 61854 : 1999
|
OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
PREN 14782 : DRAFT 2015
|
SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
12/30265301 DC : 0
|
BS EN 124-1 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: CLASSIFICATION, COMMON DESIGN, PERFORMANCE AND TESTING REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
I.S. EN 16523-2:2015
|
DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
07/30163072 DC : 0
|
BS EN 15651-1 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 1: SEALANTS FOR FACADE |
14/30301841 DC : 0
|
BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
DIN EN 344-1:1997-06
|
SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE - PART 1: REQUIREMENTS AND TEST METHODS |
15/30324023 DC : 0
|
BS EN 62677-3-102 ED. 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: MATERIAL REQUIREMENTS - SHEET 102: HEAT-SHRINKABLE, POLYOLEFIN, ANTI-TRACKING MOULDED SHAPES FOR MEDIUM VOLTAGE APPLICATIONS |
PREN 14187-5 : DRAFT 2016
|
COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS |
13/30240167 DC : 0
|
BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN 16261-3:2013-03
|
Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods |
PREN 13832-2 : DRAFT 2017
|
FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS |
BS 7933-1:1998
|
Electric cables. Accessories. Material characterization Resinous compounds before cure and in the cured state |
UNI EN ISO 23936-1 : 2009
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
11/30246171 DC : 0
|
BS EN 71-4 - SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
DIN ISO 5355 E : 2006
|
ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
NFC 33 009-1 : 2008
|
ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
BS EN 15649-1 : 2009
|
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
03/319400 DC : DRAFT NOV 2003
|
BS EN 14035-21 - FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
05/30133728 DC : DRAFT MAY 2005
|
EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
UNE 104244:2011
|
Waterproofing. Bituminous and bituminous modified materials. Polymer modified tar sheets |
BS EN 13832-3:2006
|
Footwear protecting against chemicals Requirements for footwear highly resistant to chemicals under laboratory conditions |
12/30274859 DC : 0
|
BS ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
PD CEN/TR 15990:2010
|
Data sheets. Footwear tests materials and test adhesives |
13/30279826 DC : 0
|
BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
BS EN 50290-2-37:2016
|
Communication cables Common design rules and construction. Polyethylene insulation for coaxial cables |
EN 115-1:2017
|
Safety of escalators and moving walks - Part 1: Construction and installation |
BS EN 50290-2-25:2013
|
Communication cables Common design rules and construction. Polypropylene insulation compounds |
BS EN 344-1:1993
|
Safety, protective and occupational footwear for professional use Requirements and test methods |
04/30091878 DC : DRAFT FEB 2004
|
BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
BS EN 16264:2014
|
Pyrotechnic articles. Other pyrotechnic articles. Cartridges for powder actuated tools |
BS EN 62217:2013
|
Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria |
14/30293503 DC : 0
|
BS EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
91/83289 DC : DRAFT DEC 1991
|
PREN 3624 - AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
UNI CEN/TS 16354 : 2014
|
LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
PREN 13832-1 : DRAFT 2017
|
FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
04/30109201 DC : DRAFT OCT 2004
|
EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
04/30122412 DC : DRAFT SEP 2004
|
ISO 17194 - STRUCTURAL ADHESIVES - STANDARD DATABASE OF PROPERTIES |
97/107906 DC : DRAFT DEC 1997
|
PREN 13022-1 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: ACTIONS, REQUIREMENTS AND TERMINOLOGY |
ISO 11659-2:2004
|
Textile machinery and accessories Machine parts in contact with textile processing oils Part 2: Determination of the impact on polymeric materials |
ASTM D 6835 : 2017 : REDLINE
|
Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE) |
BS ISO 2898-2 : 1997 AMD 10727
|
PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
PD EN 14035-17:2004
|
Fireworks Ground spinners. Specification and test methods |
BS EN 16028:2012
|
Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications |
13/30293736 DC : 0
|
BS EN 50290-2-33 - COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI ELEMENT METALLIC DATA CABLES FOR INDOOR APPLICATION |
UNE-EN 16805:2016
|
Diving equipment - Diving mask - Requirements and test methods |
SAE AMS 2980/1 : 2014
|
CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS |
I.S. EN ISO 20753:2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
ISO 24817:2017
|
Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
UNE-EN 15649-1:2010
|
Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
CSA C22.2 No. 18.3 : 2012
|
CONDUIT, TUBING, AND CABLE FITTINGS |
C22.2 NO. 18.3-12 (R2017)
|
Conduit, tubing, and cable fittings (Tri-national standard, with ANCE NMX-J-017 and UL 514B) |
PREN 71-1 : DRAFT 2014
|
SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
PREN 3624 : 200P1
|
AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
HD 631.1 : 200S2
|
ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
API TR 1PER15K-1 : 2013
|
PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
I.S. EN 16264:2014
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
BS 1344-17:1975
|
Methods of testing vitreous enamel finishes Resistance to hot sodium hydroxide solution |
CEN/TR 15990:2010/AC:2010
|
DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES |
I.S. EN 60544-2:2012
|
ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV)) |
PD EN 14035-4:2003
|
Fireworks Bangers and banger batteries. Specification and test methods |
BS EN 13832-2:2006
|
Footwear protecting against chemicals Requirements for footwear resistant to chemicals under laboratory conditions |
UNI EN 71-1 : 2015
|
SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
I.S. EN 50290-2-38:2016
|
COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION FOR COAXIAL CABLES |
ISO 24338:2014
|
Laminate floor coverings Determination of abrasion resistance |
PREN 50290-2-38 : DRAFT 2013
|
COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
I.S. EN 60455-2:2015
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
I.S. EN 61854:1999
|
OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
UNI ISO 7619-1 : 2011
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS) |
BS ISO 9838:2015
|
Alpine and touring ski-bindings. Test soles for ski-binding tests |
I.S. EN 14035-21:2005
|
FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
I.S. EN 50368:2003
|
CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
DIN EN 15947-4:2016-02
|
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
BS EN ISO 24817:2017
|
Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
UNI EN ISO 21809-1 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
I.S. EN 15651-1:2017
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
I.S. EN 15551:2017
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
AAMI TIR17 : 2008
|
COMPATIBILITY OF MATERIALS SUBJECT TO STERILIZATION |
PREN 15468 : DRAFT 2013
|
LAMINATE FLOOR COVERINGS - ELEMENTS WITH DIRECTLY APPLIED PRINTING AND RESIN SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
UNI EN 1466 : 2015
|
CHILD USE AND CARE ARTICLES - CARRY COTS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS |
UNE-EN 50290-2-38:2016
|
Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables |
I.S. EN 14035-33:2005
|
FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
AAMI TIR17 : 2017
|
COMPATIBILITY OF MATERIALS SUBJECT TO STERILIZATION |
UNE-EN 62790:2015
|
Junction boxes for photovoltaic modules - Safety requirements and tests |
ISO 5355:2005
|
Alpine ski-boots Requirements and test methods |
BS EN ISO 20753:2014
|
Plastics. Test specimens |
PREN 15655 : DRAFT 2016
|
DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
EN 16523-1:2015
|
Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact |
ASTM D 5857 : 2017 : REDLINE
|
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
BS EN 60684-3-247 : 2011
|
FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-247:2011) |
ASTM F 2872 : 2016 : REDLINE
|
Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire |
ASTM D 5963 : 2004
|
Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
EN ISO 20029-2:2018
|
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017) |
DIN EN 71-1:2015-02
|
SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
ASTM F 2871 : 2016 : REDLINE
|
Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire |
ISO 27668-1:2017
|
Gel ink ball pens and refills — Part 1: General use |
ISO 21809-3:2016
|
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
I.S. EN 15655:2009
|
DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
ISO 17194:2007
|
Structural adhesives A standard database of properties |
DIN EN 12790:2009-07
|
Child use and care articles - Reclined cradles |
DIN EN 14879-2 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
DIN EN 14879-3 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
EN ISO 13628-2:2006/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
DIN EN ISO 6808:2014-10
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
DIN EN 15062 E : 2006
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
DIN EN 295-4:2013-05
|
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
DIN EN 14782 E : 2006
|
SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
DIN EN 13036-3 E : 2003
|
ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 3: MEASUREMENT OF PAVEMENT SURFACE HORIZONTAL DRAINABILITY |
DIN EN 15346:2015-01
|
PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
DIN EN ISO 20344 E : 2013
|
PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011) |
BS EN 14035-25:2005
|
Fireworks Party poppers. Specification and test methods |
ISO 9523:2015
|
Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods |
BS EN 1392:2006
|
Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
BS EN 13121-1:2003
|
GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions |
ISO 28706-4:2016
|
Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel |
BS EN 10329 : 2005
|
STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
BS EN 10289:2002
|
Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings |
BS EN 14035-22:2004
|
Fireworks Mines. Specification and test methods |
UNE-EN ISO 6808:2015
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
BS EN 14035-7:2004
|
Fireworks Bengal matches. Specification and test methods |
BS EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
ISO 2898-2:2008
|
Plastics Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
IEC 62217:2012
|
Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
EN 62790:2015
|
Junction boxes for photovoltaic modules - Safety requirements and tests |
DIN EN 1504-2:2005-01
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
OVE/ONORM EN 60684-3-214 : 2014
|
FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-214:2013) |
DIN EN 1504-7:2006-11
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
EN ISO 21509:2015
|
Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006) |
EN 14354:2017
|
Wood-based panels - Wood veneer floor coverings |
EN 14035-21 : 2005
|
FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
EN 14035-20 : 2005
|
FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
EN 50262 : 1998 AMD 2 2004
|
CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
UNI EN 16028 : 2012
|
RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
UNI EN 15434 : 2010
|
GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
UNI EN 1504-7 : 2007
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
UNI EN ISO 20344 : 2012
|
PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR |
UNI EN 15189 : 2007
|
DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
UNI EN 295-3 : 2012
|
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS |
UNI EN 14865-2 : 2011
|
RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
EN ISO 6808:2014
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
UNI EN 10245-1 : 2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
UNI EN 10245-2 : 2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
UNI EN 295-4 : 2013
|
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
UNI EN ISO 13628-2 : 2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
UNI EN ISO 2898-2 : 2009
|
PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 50290-2-33:2016
|
Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable) |
UNI EN ISO 14910-2 : 2013
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN ISO 13628-10:2006
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
UNI EN ISO 6808 : 2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION |
UNI EN 10245-4 : 2011
|
Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires |
UNI EN 12790 : 2009
|
CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
UNI EN 14294 : 2010
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
UNE-ISO 7619-1:2011
|
Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness) |
CEI EN 60684-3-214 : 2015
|
FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, NOT FLAME RETARDED, THICK AND MEDIUM WALL |
BS EN ISO 20029-2:2018
|
Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties |
07/30169170 DC : 0
|
BS ISO 28706-4 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL |
DIN EN 16028 E : 2012
|
RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
DD CEN ISO/TS 24817:2011
|
Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
99/540206 DC : 0
|
EN 12259-9 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 9: DELUGE VALVES |
06/30146128 DC : DRAFT FEB 2006
|
ISO 9838 - ALPINE AND TOURING SKI-BINDINGS - TEST SOLES FOR SKI-BINDING TESTS |
I.S. EN 15062:2006
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
12/30254141 DC : 0
|
BS EN 15651-4 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
BS EN ISO 12736:2014
|
Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
BS EN 60544-4:2003
|
Electrical insulating materials. Determination of the effects of ionizing radiation Classification system for service in radiation environments |
BS ISO 16616:2015
|
Test methods for natural fibre-reinforced plastic composite (NFC) deck boards |
16/30337049 DC : 0
|
BS EN 50290-2-34 - COMMUNICATION CABLES - PART 2-34: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE SHEATHING COMPOUND FOR OUTDOOR OPTICAL FIBRE CABLES |
BS EN 61215-2:2017
|
Terrestrial photovoltaic (PV) modules. Design qualification and type approval Test procedures |
03/319402 DC : DRAFT NOV 2003
|
BS EN 14035-26 - FIREWORKS - PART 26: PERCUSSION CAPS - SPECIFICATION AND TEST METHODS |
PREN 50290-2-33 : DRAFT 2013
|
COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI ELEMENT METALLIC DATA CABLES FOR INDOOR APPLICATION |
02/207432 DC : DRAFT JUN 2002
|
IEC 62217. ED.1.0 - CREATION OF A COMMON CLAUSE STANDARD FOR COMPOSITE INSULATORS |
BS EN 12488:2016
|
Glass in building. Glazing recommendations. Assembly principles for vertical and sloping glazing |
03/319401 DC : DRAFT NOV 2003
|
BS EN 14035-25 - FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
DIN EN 15651-2:2016-10 (Draft)
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
BS EN IEC 62677-3-101:2018
|
Heat-shrinkable low and medium voltage moulded shapes Specification for individual materials. Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications |
10/30195690 DC : 0
|
BS EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
DIN EN 16523-1 E : 2015
|
DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
12/30254135 DC : 0
|
BS EN 15651-2 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
I.S. EN ISO 21809-1:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
UNI EN 10245-5 : 2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
CEI EN 50290-2-23 : 2014
|
COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |
14/30304003 DC : 0
|
BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
02/206403 DC : DRAFT MAY 2002
|
IEC 62231. ED.1.0 - COMPOSITE STATION POST INSULATORS FOR SUBSTATIONS WITH A.C. VOLTAGES GREATER THAN 1000 V UPTO 245 KV - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
BS EN 14187-5:2003
|
Cold applied joint sealants Test method for the determination of the resistance to hydrolysis |
PREN 15651-4 : DRAFT 2012
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
BS EN 124-1:2015
|
Gully tops and manhole tops for vehicular and pedestrian areas Definitions, classification, general principles of design, performance requirements and test methods |
UNE-EN 50617-1:2015
|
Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits |
BS EN ISO 21809-3:2016
|
Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
13/30281710 DC : 0
|
BS EN 62444 - CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
BS ISO 11999-6:2016
|
PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Footwear |
13/30293741 DC : 0
|
BS EN 50290-2-37 - COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
13/30281393 DC : 0
|
BS EN 50290-2-23 - COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - PE INSULATION |
UNE-EN 10310:2011
|
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
17/30340672 DC : 0
|
BS EN ISO 17892-12 - GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 12: DETERMINATION OF LIQUID AND PLASTIC TESTS |
ISO 14145-1:2017
|
Roller ball pens and refills — Part 1: General use |
UNE-EN 15947-4:2016
|
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
UNE-EN 16265:2016
|
Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
PD EN 14035-10:2004
|
Fireworks Double bangers. Specification and test methods |
BS EN 50368:2003
|
Cable cleats for electrical installations |
PREN 13832-3 : DRAFT 2017
|
FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR PROLONGED CONTACT WITH CHEMICALS |
UNI EN 13696 : 2009
|
WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
DIN EN 15649-1:2014-06
|
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
PREN 16523-2 : DRAFT 2013
|
DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
BS 5258-3(1975) : LATEST
|
DRYING CABINETS |
PD EN 14035-31:2005
|
Fireworks Shell-in-mortars. Specification and test methods |
DIN EN 14035-13:2004-11
|
FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS |
BS 7825-3.3:1997
|
Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of plastics |
PD EN 14035-9:2004
|
Fireworks Crackling granules. Specification and test methods |
02/122386 DC : DRAFT JUN 2002
|
ISO/DIS 7619-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS) |
08/30180844 DC : DRAFT JUNE 2008
|
BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
I.S. EN 14035-38:2006
|
FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS |
03/319404 DC : DRAFT NOV 2003
|
BS EN 14035-33 - FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
16/30341186 DC : 0
|
BS EN ISO 11393-5 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 5: TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE GAITERS |
UNE-EN 15651-3:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints |
BS ISO 7619-2:2004
|
Rubber, vulcanized or thermoplastic. Determination of indentation hardness IRHD pocket meter method |
PD CEN/TS 16354:2013
|
Laminate floor coverings. Underlays. Specification, requirements and test methods |
12/30254132 DC : 0
|
BS EN 15651-1 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
07/30156488 DC : 0
|
EN 15655 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
BS EN 15655:2009
|
Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods |
08/30176450 DC : DRAFT JAN 2008
|
BS EN ISO 27668-1 - GEL INK BALL PENS AND REFILLS - PART 1: GENERAL USE |
BS 7933-2:2007
|
Electric cables. Accessories. Material characterisation Fingerprinting and type tests for heat shrinkable components for low voltage applications |
16/30336750 DC : 0
|
BS EN 50290-2-35 - COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND |
BS EN ISO 23936-1:2009
|
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics |
BS EN 60684-3-214:2014
|
Flexible insulating sleeving Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall |
14/30256269 DC : 0
|
BS EN ISO 24817 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
PD EN 14035-12:2003
|
Fireworks Flash bangers and flash banger batteries. Specification and test methods |
14/30287623 DC : 0
|
BS ISO 10361 - TEXTILE FLOOR COVERINGS - PRODUCTION OF CHANGES IN APPEARANCE BY MEANS OF VETTERMANN DRUM AND HEXAPOD TUMBLER TESTER |
BS EN 50262:1999
|
Cable glands for electrical installations |
DIN EN 16523-1:2015-04
|
DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
DD ISO/TS 24817 : 2006
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
BS EN 16523-2:2015
|
Determination of material resistance to permeation by chemicals Permeation by gaseous chemical under conditions of continuous contact |
BS EN 71-1 : 2014
|
SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
PREN 15651-2 : DRAFT 2012
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
DIN EN 124-1:2015-09
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS |
15/30304408 DC : 0
|
BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
17/30346164 DC : 0
|
BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
UNI EN 71-13 : 2014
|
SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
API 17J REDLINE : 2008
|
SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
BS EN ISO 21809-1:2011
|
Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP) |
ISO 22498:2005
|
Plastics — Vinyl chloride homopolymer and copolymer resins — Particle size determination by mechanical sieving |
UNI EN 15649-1 : 2014
|
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
UNE-EN ISO 21809-1:2011
|
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
I.S. EN 16256-5:2012
|
PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS |
I.S. EN 62217:2013
|
POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV)) |
BS IEC 62899-201 : 2016
|
PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
UNI EN ISO 20753 : 2014
|
PLASTICS - TEST SPECIMENS |
I.S. EN 50617-1:2015
|
RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 1: TRACK CIRCUITS |
SAE MS 1004 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE H (HYDRAULIC FLUIDS) - SPECIFICATION |
I.S. EN ISO 20029-2:2018
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017) |
I.S. EN 13832-3:2006
|
FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
SAE MS 1003-2 : 2004
|
Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013) |
SAE MS 1001 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION |
ISO 11999-6:2016
|
PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 6: Footwear |
I.S. EN 60684-3-247:2011
|
FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL |
ISO 26261-3:2017
|
Fireworks — Category 4 — Part 3: Test methods |
I.S. EN 50290-2-21:2001
|
COMMUNICATION CABLES - PART 2-21: COMMON DESIGN RULES AND CONSTRUCTION - PVC INSULATION COMPOUNDS |
I.S. EN 71-13:2014
|
SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
PREN 15307 : DRAFT 2014
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
I.S. EN 13696:2009
|
WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
PREN 50290-2-37 : DRAFT 2013
|
COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
14/30311496 DC : 0
|
BS EN 14187-5 - COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS |
17/30359551 DC : 0
|
BS EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
15/30316975 DC : 0
|
BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
PD EN 14035-18:2004
|
Fireworks Hand-held fountains. Specification and test methods |
ISO 7619-2:2010
|
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method |
I.S. EN ISO 28706-4:2016
|
VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL (ISO 28706-4:2016) |
I.S. EN 15947-4:2015
|
PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS |
ASTM D 5963 : 2004 : R2015
|
Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
UNE-EN 15551:2017
|
Railway applications - Railway rolling stock - Buffers |
EN ISO 20753:2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
ISO 16365-2:2014
|
Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties |
ISO 15676:2016
|
Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) |
EN 14187-5:2003
|
COLD APPLIED JOINT SEALANTS - PART 5: TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO HYDROLYSIS |
ISO 19861:2015
|
Buildings and civil engineering works — Sealants — Determination of curing behaviour |
ISO 21809-4:2009
|
Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 4: Polyethylene coatings (2-layer PE) |
ISO 7619-1:2010
|
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
ISO 10361:2015
|
Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
DIN EN 295-3:2012-03
|
Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
I.S. EN 50290-2-25:2013
|
COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
I.S. EN 71-1:2014
|
SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
S.R. CEN TR 15990:2010
|
DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES |
EN 15468:2016
|
Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods |
UNE-EN ISO 21809-1:2019
|
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018) |
IEC 61854:1998
|
Overhead lines - Requirements and tests for spacers |
UNE-EN ISO 14910-2:2014
|
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15) |
DIN EN ISO 14910-2 E : 2013
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013) |
DIN EN 14865-2:2011-01
|
Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010) |
DIN EN 14510 E : 2005
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - DETERMINATION OF SOLE POSITIONING TACK (SPOTTING TACK) |
DIN EN 10245-4:2012-01
|
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
BS EN 1504-7:2006
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Reinforcement corrosion protection |
ISO 9054:1990
|
Cellular plastics, rigid — Test methods for self-skinned, high-density materials |
BS EN 14354:2017
|
Wood-based panels. Wood veneer floor coverings |
BS EN ISO 13628-10:2006
|
Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
UNE-EN 16028:2013
|
Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
DIN EN 15189 E : 2007
|
DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
BS EN 1391:1998
|
Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification |
UNE-EN 1504-2:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
BS EN 13036-3:2002
|
Road and airfield surface characteristics. Test methods Measurement of pavement surface horizontal drainability |
BS EN ISO 13000-2:2005
|
Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Preparation of test specimens and determination of properties |
BS EN 15062:2006
|
Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
DIN EN ISO 20344:2013-02
|
Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
EN ISO 21809-3:2016
|
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
IEC 60684-3-214:2013
|
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall |
ISO 2039-2:1987
|
Plastics Determination of hardness Part 2: Rockwell hardness |
DIN EN 15307:2015-04
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
ISO 4613-2:1995
|
Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN 12961:2001
|
Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives |
BS EN 10290:2002
|
Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings |
UNE-EN 14294:2010
|
Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
15/30324856 DC : 0
|
BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
BS EN 13529:2003
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack |
BS EN 14879-4:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
BS EN 14483-4:2004
|
Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel |
BS EN 14035-38:2006
|
Fireworks Shot tubes. Specification and test methods |
BS EN 15434 : 2006
|
GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
IEC 60544-2:2012
|
Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test |
UNE-EN 10245-4:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
IEC 60455-2:2015
|
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
UNE-EN 15307:2015
|
Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
BS EN 14879-3:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
BS EN 14035-34:2003
|
Fireworks Table bombs. Specification and test methods |
BS EN 14035-19:2003
|
Fireworks Hand-held sparklers. Specification and test methods |
BS EN 522:1998
|
Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification |
UNE-EN 10245-2:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
ISO 6265:2013
|
Alpine skis — Determination of deformation load and breaking load |
IEC 61076-7-100:2006
|
Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system |
ISO 6808:2014
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification |
BS EN ISO 2039-2:2000
|
Determination of Rockwell hardness. Rockwell hardness Rockwell hardness |
DIN EN 15434:2010-07
|
Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010) |
BS EN 15468:2016
|
Laminate floor coverings. Elements with directly applied printing and resin surface layer. Specifications, requirements and test methods |
BS EN 14035-24:2004
|
Fireworks Novelty matches. Specification and test methods |
BS EN 14035-23:2003
|
Fireworks Non-hand-held sparklers. Specification and test methods |
BS EN 15189:2006
|
Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods |
BS EN 10245-4:2011
|
Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
IEC 60455-3-8:2013
|
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
ISO 13000-2:2005
|
Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 2: Preparation of test specimens and determination of properties |
BS EN 10245-1:2011
|
Steel wire and wire products. Organic coatings on steel wire General rules |
ISO 23936-1:2009
|
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
UNE-EN 1466:2015
|
Child use and care articles - Carry cots and stands - Safety requirements and test methods |
UNE-EN 71-4:2013
|
Safety of toys - Part 4: Experimental sets for chemistry and related activities |
BS EN 14510:2005
|
Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack) |
I.S. EN 381-8:1997
|
PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN SAWS - PART 8: TEST METHODS FOR CHAIN SAW PROTECTIVE GAITERS |
BS EN ISO 9054:1999
|
Cellular plastics, rigid. Test methods for self-skinned high-density materials |
UNE-EN 10245-1:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
UNE-EN 14354:2017
|
Wood-based panels - Wood veneer floor coverings |
ISO 12736:2014
|
Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
UNE 41302:2013 IN
|
Instructions for the application of rendering and plastering mortars. |
BS EN 14035-15:2003
|
Fireworks Fountains. Specification and test methods |
BS EN 14035-5:2006
|
Fireworks Batteries and combinations. Specification and test methods |
ISO 13628-2:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
DIN EN 15468:2016-08
|
Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods |
DIN EN 15307 E : 2015
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
DIN EN 10245-1:2012-01
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
DIN EN 13036-3:2003-06
|
ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 3: MEASUREMENT OF PAVEMENT SURFACE HORIZONTAL DRAINABILITY |
EN 14035-3 : 2004
|
FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS |
EN 15651-2:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
EN 295-3:2012
|
Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
EN 522 : 1998
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - BOND STRENGTH - MINIMUM REQUIREMENTS AND ADHESIVE CLASSIFICATION |
EN 16261-3:2012
|
Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods |
EN 14879-3:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
EN 14035-27:2003/AC:2005
|
FIREWORKS - PART 27: ROCKETS - SPECIFICATION AND TEST METHODS |
EN 14879-2:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
EN ISO 2898-2:2008
|
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008) |
EN 14035-7 : 2004
|
FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS |
EN 14879-5:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
EN 14510:2005
|
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
ONORM EN ISO 20344 : 2012
|
PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011) |
EN 15189:2006
|
Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
EN 14035-25 : 2005
|
FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
EN 14035-34:2003/AC:2005
|
FIREWORKS - PART 34: TABLE BOMBS - SPECIFICATION AND TEST METHODS |
EN 13696:2008
|
Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance |
EN 14035-35 : 2004
|
FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
EN 14294:2010
|
Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
EN ISO 2039-2 : 1999
|
PLASTICS - DETERMINATION OF HARDNESS - PART 2 - ROCKWELL HARDNESS |
EN 14035-22 : 2004
|
FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS |
EN 15434:2006+A1:2010
|
Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
EN 14035-24 : 2004
|
FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
EN 16028:2012
|
Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
EN 15551:2017
|
Railway applications - Railway rolling stock - Buffers |
EN ISO 21809-1:2011
|
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
EN 16805:2015
|
Diving equipment - Diving mask - Requirements and test methods |
EN 1391 : 1998
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - A METHOD FOR EVALUATING THE BONDABILITY OF MATERIALS - MINIMUM REQUIREMENTS AND MATERIAL CLASSIFICATION |
EN 15062:2006
|
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
EN ISO 9054 : 1999
|
CELLULAR PLASTICS, RIGID - TEST METHODS FOR SELF-SKINNED, HIGH-DENSITY MATERIALS |
EN 14035-4:2003/AC:2005
|
FIREWORKS - PART 4: BANGERS AND BANGER BATTERIES - SPECIFICATION AND TEST METHODS |
EN 15947-4:2015
|
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
EN 14035-15:2003/AC:2005
|
FIREWORKS - PART 15: FOUNTAINS - SPECIFICATION AND TEST METHODS |
EN 14035-8 : 2004
|
FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS |
EN 14035-19:2003/AC:2006
|
FIREWORKS - PART 19: HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS |
EN 15649-1:2009+A2:2013
|
Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
EN 14035-17 : 2004
|
FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
EN 15651-3:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints |
EN 14035-33 : 2005
|
FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
EN ISO 28706-4:2016
|
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016) |
EN 1392:2006
|
Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions |
EN 14035-10 : 2004
|
FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS |
EN 14035-23:2003/AC:2005
|
FIREWORKS - PART 23: NON-HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS |
EN 14035-13 : 2004
|
FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS |
EN 14035-12:2003/AC:2005
|
FIREWORKS - PART 12: FLASH BANGERS AND FLASH BANGER BATTERIES - SPECIFICATION AND TEST METHODS |
EN 1504-7:2006
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
EN 16265:2015
|
Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
EN 14782:2006
|
Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
EN 14035-18 : 2004
|
FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS |
EN ISO 14910-2:2013
|
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15) |
EN 14035-6 : 2004
|
FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS |
EN ISO 23936-1:2009
|
Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009) |
EN 16256-5:2012
|
Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods |
EN 16263-4:2015
|
Pyrotechnic articles - Other pyrotechnic articles - Part 4: Test methods |
EN 295-4:2013
|
Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
EN ISO 12736:2014
|
Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
EN 10245-4:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
EN 14865-2:2006+A2:2010
|
Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h |
EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
EN 14035-31 : 2005
|
FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
EN 14035-28 : 2004 COR 2006
|
FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS |
EN 381-8:1997
|
Protective clothing for users of hand-held chain saws - Part 8: Test methods for chain saw protective gaiters |
EN 15307:2014
|
Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
EN 14035-9 : 2004
|
FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS |
EN 13893:2002
|
Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces |
EN 14879-4:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
EN 15346:2014
|
Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
EN 15651-1:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements |
EN 14035-38:2006
|
Fireworks - Part 38: Shot tubes - Specification and test methods |
EN 14483-4 : 2004
|
VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL |
EN 14035-5 : 2006
|
FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
14/30303444 DC : 0
|
BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS |
EN 71-13:2014
|
Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
BS EN 16256-5:2012
|
Pyrotechnic articles. Theatrical pyrotechnic articles Test methods |
PD EN 14035-20:2005
|
Fireworks Jumping crackers. Specification and test methods |
BS ISO 16365-2:2014
|
Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties |
PD EN 14035-33:2006
|
Fireworks Spinners. Specification and test methods |
15/30315493 DC : 0
|
BS ISO 9838 - ALPINE AND TOURING SKI-BINDINGS - TEST SOLES FOR SKI-BINDING TESTS |
PD ISO/TS 11819-3:2017
|
Acoustics. Measurement of the influence of road surfaces on traffic noise Reference tyres |
BS ISO 21809-4:2009
|
Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE) |
UNI EN 16264 : 2014
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
14/30312152 DC : 0
|
BS EN 16805 - DIVING EQUIPMENT - DIVING MASK - REQUIREMENTS AND TEST METHODS |
PREN 71-4 : DRAFT 2011
|
SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
PREN 15651-1 : DRAFT 2012
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
BS ISO 9523:2015
|
Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods |
UNE-EN 16256-5:2013
|
Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods |
I.S. EN 16805:2015
|
DIVING EQUIPMENT - DIVING MASK - REQUIREMENTS AND TEST METHODS |
03/112821 DC : DRAFT AUG 2003
|
ISO 21509 - PLASTICS AND EBONITE - VERIFICATION OF SHORE HARDNESS DUROMETERS |
UNE-EN 10245-5:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
ISO 16616:2015
|
Test methods for natural fibre-reinforced plastic composite (NFC) deck boards |
UNE-EN 62217:2013
|
Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
BS EN 50290-2-29:2016
|
Communication cables Common design rules and construction. Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables |
PREN 50290-2-29 : DRAFT 2016
|
COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES |
13/30276234 DC : 0
|
BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
PREN 50290-2-35 : DRAFT 2016
|
COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND |
11/30243837 DC : 0
|
BS EN 62217 - POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
13/30289256 DC : 0
|
BS EN 15468 - LAMINATE FLOOR COVERINGS - ELEMENTS WITH DIRECTLY APPLIED PRINTING AND RESIN SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
UNE-EN 15346:2015
|
Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
BS ISO 24338:2014
|
Laminate floor coverings. Determination of abrasion resistance |
DIN EN 14035-33:2006-01
|
FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
I.S. EN 13832-2:2006
|
FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
I.S. EN 16265:2015
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
BS ISO 16365-1:2014
|
Plastics. Thermoplastic polyurethanes for moulding and extrusion Designation system and basis for specifications |
BS ISO 10361:2015
|
Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
03/100997 DC : DRAFT MAR 2003
|
BS EN 13022-2 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: PRODUCT STANDARD FOR ULTRA-VIOLET RESISTANT SEALANT AND STRUCTURAL SEALANT |
08/30154948 DC : DRAFT FEB 2008
|
BS ISO 21809-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE) |
BS EN 16261-3:2012
|
Pyrotechnic articles. Fireworks, Category 4 Test methods |
08/30172148 DC : DRAFT MAY 2008
|
BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING |
BS EN 71-13:2014
|
Safety of toys Olfactory board games, cosmetic kits and gustative games |
ONORM EN 71-13 : 2014
|
SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
SAE MS 1006 : 2018
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE F LUBRICANT FOR SPINDLE BEARINGS, AND ASSOCIATED CLUTCHES - SPECIFICATION |
DIN EN 14035-21:2006-01
|
FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
DIN EN 14035-20:2005-06
|
FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
IEC 62444:2010
|
Cable glands for electrical installations |
04/30123574 DC : DRAFT OCT 2004
|
EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
15/30314236 DC : 0
|
BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO) |
12/30254138 DC : 0
|
BS EN 15651-3 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
UNE-EN 71-1:2015
|
Safety of toys - Part 1: Mechanical and physical properties |
BS EN 13696:2008
|
Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance |
DIN EN 16805:2016-02
|
DIVING EQUIPMENT - DIVING MASK - REQUIREMENTS AND TEST METHODS |
12/30255619 DC : 0
|
BS ISO 6265 - ALPINE SKIS - DETERMINATION OF DEFORMATION LOAD AND BREAKING LOAD |
14/30301109 DC : 0
|
BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
07/30150249 DC : 0
|
BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
15/30324018 DC : 0
|
BS EN 62677-3-101 ED. 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: MATERIAL REQUIREMENTS - SHEET 101: HEAT-SHRINKABLE, POLYOLEFIN MOULDED SHAPES FOR LOW VOLTAGE APPLICATIONS |
EN IEC 62677-3-101:2018
|
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications |
13/30293745 DC : 0
|
BS EN 50290-2-38 - COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
PREN 50290-2-23 : DRAFT 2013
|
COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - PE INSULATION |
PREN 15346 : DRAFT 2013
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
DIN EN 14035-17:2004-11
|
FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
09/30193391 DC : DRAFT MAY 2009
|
BS ISO 7619-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS) |
PREN 1504-7 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
07/30139822 DC : 0
|
|
BS EN 16523-1 : 2015
|
DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
UNE-EN 15651-2:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
00/103366 DC : DRAFT APR 2000
|
PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS |
07/30163692 DC : 0
|
BS EN 15651-3 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 3: SEALANTS FOR SANITARY JOINTS |
CEI EN 60544-4 : 2005
|
ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS |
CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014
|
CONDUIT, TUBING, AND CABLE FITTINGS |
EN 13832-3:2006
|
Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
API 17L1 : 2013
|
SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
UNE-EN 16263-4:2016
|
Pyrotechnics articles - Other pyrotechnic articles - Part 4: Test methods |
ONORM EN ISO 14910-2 : 2013
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013) |
SAE MS 1009 : 2012
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE P PNEUMATIC TOOL OILS - SPECIFICATION |
UNE-EN 50290-2-35:2016
|
Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound |
I.S. EN 14035-18:2005
|
FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS |
SAE MS 1010 : 2012
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE T TURBINE OILS - SPECIFICATION |
ASTM D 5963 : 2004 : R2010
|
Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
BS EN 15651-1:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for facade elements |
I.S. EN 16263-4:2015
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS |
I.S. EN IEC 62677-3-101:2018
|
HEAT-SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: SPECIFICATION FOR INDIVIDUAL MATERIALS - SHEET 101: HEAT-SHRINKABLE, POLYOLEFIN MOULDED SHAPES FOR LOW VOLTAGE APPLICATIONS |
I.S. EN 13832-1:2006
|
FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
I.S. EN ISO 14910-2:2013
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15) |
I.S. EN 10245-5:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
ISO 8124-1:2018
|
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties |
UNE-EN 50290-2-37:2016
|
Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables |
EN 61215-2 : 2017 COR 2018
|
TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 2: TEST PROCEDURES (IEC 61215-2:2016/COR1:2018) |
UNE-EN 50548:2012
|
Junction boxes for photovoltaic modules |
I.S. EN ISO 23936-1:2009
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
I.S. EN 14035-20:2005
|
FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
UNE-EN ISO 21809-3:2016
|
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
S.R. CEN/TS 16354:2013
|
LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
I.S. EN 60455-3-8:2013
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV)) |
API TR 17TR8 : 2018
|
HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
PREN 50290-2-25 : DRAFT 2013
|
COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
BS EN 115-1:2017
|
Safety of escalators and moving walks Construction and installation |
I.S. EN 15649-1:2009
|
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
EN 71-1:2014
|
Safety of toys - Part 1: Mechanical and physical properties |
ISO 12757-1:2017
|
Ball point pens and refills — Part 1: General use |
IEC 62631-3-1:2016
|
Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method |
PREN 17155 : DRAFT 2017
|
LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
ISO 25947-4:2017
|
Fireworks — Categories 1, 2 and 3 — Part 4: Test methods |
ISO 11393-5:2001
|
Protective clothing for users of hand-held chain-saws Part 5: Test methods and performance requirements for protective gaiters |
I.S. EN 15651-3:2017
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
15/30327125 DC : 0
|
BS EN 1504-7 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
I.S. EN ISO 24817:2017
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION (ISO 24817:2017, CORRECTED VERSION 2018-01-01) |
17/30360226 DC : 0
|
BS EN 17155 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
PREN 15651-3 : DRAFT 2012
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
PREN 50548 : DRAFT 2009
|
JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
PREN 50290-2-34 : DRAFT 2016
|
COMMUNICATION CABLES - PART 2-34: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE SHEATHING COMPOUND FOR OUTDOOR OPTICAL FIBRE CABLES |
ASTM D 8115 : 2017
|
Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader) |
EN ISO 13000-2:2005
|
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005) |
BS EN 13832-1:2006
|
Footwear protecting against chemicals Terminology and test methods |
ISO 14910-2:2013
|
Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties |
EN ISO 25649-1:2017
|
Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) |
UNE-EN ISO 20753:2015
|
Plastics - Test specimens (ISO 20753:2008) |
EN 15655:2009
|
Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods |
EN 15651-4:2017/AC:2017
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
S.R. CEN ISO TS 24817:2011
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
EN 60684-3-247:2011/A1:2017
|
FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-247:2011/A1:2016) |
DIN EN 1504-7:2015-09 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
DIN EN 14294 E : 2010
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
DIN EN 14354 E : 2017
|
WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
UNE-EN 15468:2016
|
Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods |
ISO 20344:2011
|
Personal protective equipment Test methods for footwear |
BS EN 14294:2004
|
Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes |
BS EN ISO 14910-2:2013
|
Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties |
BS EN ISO 2898-2:2008
|
Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Preparation of test specimens and determination of properties (ISO 2898-2:2008) |
ISO 13628-10:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
BS EN 14035-28:2004
|
Fireworks Roman candles. Specification and test methods |
BS EN 10245-2:2011
|
Steel wire and wire products. Organic coatings on steel wire PVC finished wire |
BS EN 14865-2 : 2006
|
RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
UNE-EN 295-4:2013
|
Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
BS EN 15346:2014
|
Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates |
BS EN ISO 6808:2014
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification |
BS EN 14035-27:2003
|
Fireworks Rockets. Specification and test methods |
ISO 21509:2006
|
Plastics and ebonite Verification of Shore durometers |
EN 50548 : 2011 AMD 2 2014
|
JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
CEN/TR 14548:2003
|
Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
DIN EN ISO 2898-2:2009-03
|
PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN 15651-3:2017-07
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
EN 13529:2003
|
Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack |
EN 60684-3-214:2014
|
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall |
CEN/TS 16165:2016
|
Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
EN 124-1:2015
|
Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods |
DIN EN 16523-2:2015-04
|
DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
DIN EN 14510:2005-08
|
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
DIN EN 14879-3:2007-02
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
EN 62631-3-1:2016
|
Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method |
EN 60544-4:2003
|
Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments |
DIN EN ISO 13000-2:2006-02
|
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005) |
DIN EN ISO 14910-2:2013-06
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013) |
DIN EN 10245-2:2012-01
|
Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011 |
CEN ISO/TS 24817:2011
|
Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006) |
EN 10290:2002
|
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
EN 10329:2006
|
Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
EN 62217:2013
|
Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
EN 60544-2:2012
|
Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test |
EN 50290-2-23:2013
|
COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |
DIN EN 14879-5:2007-10
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
DIN EN 10329:2006-04
|
STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
EN 50290-2-38 : 2016
|
Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables |
DIN EN 14354:2017-11
|
WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
EN 60455-2:2015
|
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
EN 50290-2-35 : 2016
|
Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound |
EN 50617-1:2015
|
Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits |
EN 50290-2-21:2001/A1:2007/AC:2016
|
COMMUNICATION CABLES - PART 2-21: COMMON DESIGN RULES AND CONSTRUCTION - PVC INSULATING COMPOUNDS |
UNE-EN 15434:2007
|
Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
BS 2782-3.365C(1992) : 1992 AMD 10694
|
PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS |
ONORM EN ISO 12736 : 2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |