ISO 14121-1:2007
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Safety of machinery Risk assessment Part 1: Principles
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
13-03-2019
Superseded by
Language(s)
English, French
Published date
23-08-2007
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 14121-1:2007 establishes general principles intended to be used to meet the risk reduction objectives established in ISO 12100-1:2003, Clause 5. These principles of risk assessment bring together knowledge and experience of the design, use, incidents, accidents and harm related to machinery in order to assess the risks posed during the relevant phases of the life cycle of a machine.
ISO 14121-1:2007 provides guidance on the information that will be required to enable risk assessment to be carried out. Procedures are described for identifying hazards and estimating and evaluating risk. It also gives guidance on the making of decisions relating to the safety of machinery and on the type of documentation required to verify the risk assessment carried out.
It is not applicable to risks posed to domestic animals, property or the environment.
| DevelopmentNote |
Supersedes ISO/DIS 14121-1 and ISO 14121. (08/2007)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN ISO 14121-1 : 2007 | Identical |
| NEN EN ISO 14121-1 : 2007 C1 2007 | Identical |
| NS EN ISO 14121-1 : 2007 | Identical |
| I.S. EN ISO 14121-1:2007 | Identical |
| PN EN ISO 14121-1 : 2008 | Identical |
| SN EN ISO 14121-1 : 2007 | Identical |
| UNI EN ISO 14121-1 : 2007 | Identical |
| UNE-EN ISO 14121-1:2008 | Identical |
| BS EN ISO 14121-1:2007 | Identical |
| EN ISO 14121-1:2007 | Identical |
| NF EN ISO 14121-1 : 2007 | Identical |
| DIN EN ISO 14121-1:2007-12 | Identical |
| UNE-EN ISO 14121-1:2007 | Identical |
| UNE-EN 1501-5:2012 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| UNE-EN ISO 4414:2011 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| BS EN 81-41:2010 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Vertical lifting platforms intended for use by persons with impaired mobility |
| 09/30179854 DC : 0 | BS EN 13114:2002/A1 - TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| BS EN 81-43:2009 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Lifts for cranes |
| BS EN 81-31:2010 | Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts |
| BS ISO 12643-3:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Binding and finishing equipment and systems |
| 14/30304370 DC : 0 | BS EN ISO 11111-4:2005/AMD 2 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY |
| PD IEC/TR 62061-1:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
| 10/30233212 DC : 0 | BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| 09/30206741 DC : 0 | BS EN 15997 - ALL TERRAIN VEHICLES - REQUIREMENTS AND TEST METHODS |
| 09/30198043 DC : 0 | BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| DIN EN ISO 13857:2008-06 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY THE UPPER AND LOWER LIMBS (ISO 13857:2008) |
| DIN EN 81-43:2010-05 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
| 11/30237569 DC : 0 | BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| DIN EN 15166:2010-02 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
| DIN EN 15093:2009-06 | Safety of machinery - Safety requirements for hot flat rolling mills |
| CEI 44-19 : 2008 | SAFETY OF MACHINERY - GUIDELINE FOR THE USE OF COMMUNICATION SYSTEMS IN SAFETY-RELATED APPLICATIONS |
| DIN EN ISO 13855:2010-10 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| 12/30271353 DC : 0 | BS EN 60335-2-8:2003/AB - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES |
| BS EN ISO 3266 : 2010 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
| CSA Z1002 : 2012 : INC : UPD 2 : 2014 | OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL |
| 10/30185766 DC : 0 | BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNI EN 81-40 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIR LIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| CSA Q31001:2011 | IMPLEMENTATION GUIDE TO CAN/CSA-ISO 31000, RISK MANAGEMENT - PRINCIPLES AND GUIDELINES |
| UNE-EN ISO 4413:2011 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| CSA Q31001 : 2011 : R2015 | IMPLEMENTATION GUIDE TO CAN/CSA-ISO 31000, RISK MANAGEMENT - PRINCIPLES AND GUIDELINES |
| CAN/CSA-Z1002-12 (R2017) | Occupational health and safety - Hazard identification and elimination and risk assessment and control |
| EN 81-41:2010 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| I.S. EN 15700:2011 | SAFETY FOR CONVEYOR BELTS FOR WINTER SPORT OR LEISURE USE |
| I.S. EN 15093:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| BS EN ISO 4414:2010 | Pneumatic fluid power. General rules and safety requirements for systems and their components |
| CLC/TS 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| BS EN ISO 13857:2008 | Safety of machinery. Safety distances to prevent hazard zones being reached by upper and lower limbs |
| IEC TR 62061-1:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
| DIN EN 81-21:2016-01 (Draft) | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILDINGS |
| UNE-EN 15089:2010 | Explosion isolation systems |
| UNE-EN 16307-1:2013 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
| UNE-EN 15997:2013 | All terrain vehicles (ATVs - Quads) - Safety requirements and test methods |
| NF EN ISO 13855 : 2010 | SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| I.S. EN 60335-2-102:2016 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-102: PARTICULAR REQUIREMENTS FOR GAS, OIL AND SOLID-FUEL BURNING APPLIANCES HAVING ELECTRICAL CONNECTIONS |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| ISO 20898:2008 | Industrial trucks — Electrical requirements |
| DIN EN 1673:2010-10 | Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 13288:2010-10 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 12852:2011-02 | Food processing machinery - Food processors and blenders - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13675:2010-10 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010) |
| DIN EN 13591:2010-10 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 1760-3:2009-07 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| DIN EN 13389:2010-10 | Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009) |
| BS EN 13570 : 2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 13977:2012 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| BS EN 12852 : 2001 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13954 : 2005 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| 12/30268015 DC : 0 | BS EN 62135-1 - RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION |
| BS EN 614-1 : 2006 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| BS EN 12851 : 2005 | FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12853 : 2001 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1034-1 : 2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS |
| BS EN 1673 : 2000 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1673:2000 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13977:2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| DIN EN 12851:2010-10 | FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 3691-5:2017-02 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: PEDESTRIAN-PROPELLED TRUCKS (ISO 3691-5:2014) |
| I.S. EN 13570:2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 1010-2:2006+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
| EN 1501-5:2011 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| EN 60825-4:2006/A2:2011 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| EN 12044:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
| EN 12852:2001+A1:2010 | Food processing machinery - Food processors and blenders - Safety and hygiene requirements |
| EN 13208:2003+A1:2010 | Food processing machinery - Vegetable peelers - Safety and hygiene requirements |
| EN 13534:2006+A1:2010 | Food processing machinery - Curing injection machines - Safety and hygiene requirements |
| EN 13114:2002+A1:2009 | Tannery machines - Rotating process vessels - Safety requirements |
| DIN EN 81-21:2012-11 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILDINGS |
| EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| CEN ISO/TR 12296:2013 | Ergonomics - Manual handling of people in the healthcare sector (ISO/TR 12296:2012) |
| EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
| EN 12854:2003+A1:2010 | Food processing machinery - Beam mixers - Safety and hygiene requirements |
| UNI EN 1034-1 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| UNE-EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| 11/30237566 DC : 0 | BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| BS ISO 14798 : 2009 | LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY |
| I.S. EN ISO 11111-7:2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 7: DYEING AND FINISHING MACHINERY (ISO 11111-7:2005) |
| I.S. EN ISO 11111-6:2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 11111-6:2005) |
| BS EN ISO 3691-5:2015 | Industrial trucks. Safety requirements and verification Pedestrian-propelled trucks |
| DIN EN 16307-1:2015-11 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS |
| DIN EN 13411-8:2011-12 | Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging; German version EN 13411-8:2011 |
| 09/30173298 DC : 0 | BS EN 81-21 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILDINGS |
| 09/30201364 DC : 0 | BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| UNI EN 81-41 : 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| DIN EN 15089:2009-07 | EXPLOSION ISOLATION SYSTEMS |
| 09/30179758 DC : 0 | BS EN 12044:2005/A1 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| 08/30180312 DC : DRAFT MAR 2008 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| 08/30186852 DC : DRAFT JULY 2008 | BS EN ISO 4413 - HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS |
| 09/30196776 DC : 0 | BS EN ISO 11161 A1 - SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS |
| BS EN ISO 13855:2010 | Safety of machinery. Positioning of safeguards with respect to the approach speeds of parts of the human body |
| BS EN 15000:2008 | Safety of industrial trucks. Self propelled variable reach trucks. Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
| UNI EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| PREN 1889-1 : DRAFT 2010 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNI EN 15700 : 2012 | SAFETY FOR CONVEYOR BELTS FOR WINTER SPORT OR LEISURE USE |
| 17/30359101 DC : 0 | BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS |
| BS EN ISO 12836:2015 | Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy |
| 09/30207016 DC : 0 | BS EN 60335-2-75:2004/PRAC - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| 12/30246642 DC : 0 | BS EN 16307-1 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS |
| BS ISO 12643-5:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Stand-alone platen presses |
| BS ISO 12643-2:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Prepress and press equipment and systems |
| DIN EN ISO 12836:2015-11 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
| BS EN 13411-8:2011 | Terminations for steel wire ropes. Safety Swage terminals and swaging |
| UNE-EN 13411-8:2012 | Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging |
| 09/30201995 DC : 0 | BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| 16/30337122 DC : 0 | BS EN 16990 - NON-TYPE APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - ALL TERRAIN VEHICLES (ATVS - QUADS) AND SIDE BY SIDE VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 4414:2011-04 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| DIN EN 15997:2012-10 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 4413:2011-04 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| CSA ISO 13857 : 2015 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
| BS EN 61810-1:2015 | Electromechanical elementary relays General and safety requirements |
| ISO 21873-2:2009 | Building construction machinery and equipment Mobile crushers Part 2: Safety requirements |
| UNI EN 81-21 : 2012 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILDING |
| IEEE 1799-2012 | IEEE Recommended Practice for Quality Control Testing of External Discharges on Stator Coils, Bars, and Windings |
| PREN 1539 : DRAFT 2012 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| ISO 12643-2:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems |
| I.S. EN ISO 3691-5:2015 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: PEDESTRIAN-PROPELLED TRUCKS (ISO 3691-5:2014) |
| BS EN 16307-1 : 2013 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS |
| S.R. CEN ISO/TR 12296:2013 | ERGONOMICS - MANUAL HANDLING OF PEOPLE IN THE HEALTHCARE SECTOR (ISO/TR 12296:2012) |
| BS EN 60335-2-8 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES |
| DIN EN 81-40:2009-04 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| IEC 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| UNI EN 81-43 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| S.R. CWA 15902-1:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS) |
| DIN EN 1010-1:2011-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010) |
| DIN EN 1678:2011-02 | Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 1777:2010-06 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| DIN EN 13114:2010-03 | Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009) |
| DIN EN 1012-1:2011-02 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
| DIN EN 14681:2010-10 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010) |
| DIN EN 14655:2010-11 | Food processing machinery - Baguette slicers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 14656:2010-10 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010) |
| DIN EN 12044:2010-03 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009) |
| BS EN 1760-3 : 2004 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| BS EN 15095 : 2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| BS EN 14673 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| BS EN 13534 : 2006 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13114:2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| I.S. EN 14656:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| I.S. EN 1012-1:2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| I.S. EN 13954:2005 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13288:2005 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13885:2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| I.S. EN 1846-2:2009 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
| UNI EN 1673 : 2010 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13886:2005 | FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13621:2004 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 614-1:2006 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| I.S. EN 15095:2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| EN 1673:2000+A1:2009 | Food processing machinery - Rotary rack ovens - Safety and hygiene requirements |
| I.S. EN 14957:2006 | FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13534:2006 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13208:2003 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12044:2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 60825-4:2006 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| ONORM EN 81-40 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| DIN EN 1034-1:2010-12 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010) |
| ONORM EN 13736 : 2009 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| I.S. EN 13015:2001 | MAINTENANCE FOR LIFTS AND ESCALATORS - RULES FOR MAINTENANCE INSTRUCTIONS |
| I.S. EN 14681:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| DIN EN 1760-1:1997-09 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| I.S. EN 13675:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| I.S. EN 13411-4:2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING |
| I.S. EN 1034-1:2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| I.S. EN 12852:2001 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12851:2006 | FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13591:2005 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1777:2010 | HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING |
| I.S. EN 809:1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| I.S. EN 14710-1:2005 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 13389:2005 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12853:2001 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1010-1:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| I.S. EN 12854:2003 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 14673:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| I.S. EN 14655:2005 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1845:2008-06 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
| I.S. EN 1678:1998 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1845:2007 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 1760-2:2001-07 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| I.S. EN 13390:2002 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13411-4 : 2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING |
| UNI EN 13390 : 2010 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| VDI 2510 Blatt 2:2013-12 | Automated guided vehicle systems (AGVS) - Safety of AGVS |
| VDI 2263 Blatt 7:2010-07 | Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in spraying and drying integrated equipment |
| VDI 3803-1 : 2010 COR 2010 | AIR-CONDITIONING - CENTRAL AIR-CONDITIONING SYSTEMS - STRUCTURAL AND TECHNICAL PRINCIPLES (VDI VENTILATION CODE OF PRACTICE) |
| CEI CLC/TR 62061-1 : 2011 | GUIDANCE ON THE APPLICATION OF ISO 13849-1 & IEC 62061 IN THE DESIGN OF SAFETY-RELATED CONTROL SYSTEMS FOR MACHINERY |
| BS EN ISO 14798:2013 | Lifts (elevators), escalators and moving walks. Risk assessment and reduction methodology |
| DIN EN 1010-2:2011-05 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery (includes Amendment A1:2010) |
| I.S. EN ISO 11111-5:2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 5: PREPARATORY MACHINERY TO WEAVING AND KNITTING (ISO 11111-5:2005) |
| I.S. EN ISO 14798:2013 | LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY (ISO 14798:2009) |
| 09/30175681 DC : 0 | BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| BS EN 14677:2008 | Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel |
| UNI EN ISO 13857 : 2008 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
| PREN 13617-1 : DRAFT 2010 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| 12/30261722 DC : DRAFT MAR 2012 | BS EN 60335-2-86 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY |
| BS EN 15166:2008 | Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements |
| S.R. OHSAS 18002:2008 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| 09/30175678 DC : 0 | BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| 10/30232428 DC : DRAFT DEC 2010 | BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| DIN EN 14677:2008-11 | SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| BS ISO 20898:2008 | Industrial trucks. Electrical requirements |
| 10/30219405 DC : 0 | BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| 10/30232425 DC : DRAFT DEC 2010 | BS EN 1870-15 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING |
| 12/30258755 DC : 0 | BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| BS EN 1010-2 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| 10/30232431 DC : DRAFT DEC 2010 | BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| UNI EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| 09/30182302 DC : 0 | BS EN 1034-1:2000/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| DIN EN 15000:2009-06 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS |
| PD CEN ISO/TR 12296:2013 | Ergonomics. Manual handling of people in the healthcare sector |
| 12/30252545 DC : 0 | BS ISO 15883-1:2006/AMD - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNE-EN ISO 13855:2011 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| I.S. EN 16307-1:2013 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS |
| DIN EN 15094:2009-04 | Safety of machinery - Safety requirements for cold flat rolling mills |
| PD ISO/TR 23849:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
| DIN EN ISO 14798:2013-04 | LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY (ISO 14798:2009) |
| BS EN 15094:2008 | Safety of machinery. Safety requirements for cold flat rolling mills |
| BS EN 15089:2009 | Explosion isolation systems |
| CLC/TR 62061-1:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
| UNI EN 15089 : 2009 | EXPLOSION ISOLATION SYSTEMS |
| BS ISO 21789:2009 | Gas turbine applications — Safety |
| CSA Z1002 : 2012 : INC : UPD 1 : 2013 | OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL |
| I.S. EN 15288-2:2008 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| ONORM EN 1501-2 : 2010 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| ONORM EN 1501-3 : 2010 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
| UNI EN ISO 14798 : 2013 | LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY |
| I.S. EN 81-41:2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| PD ISO/TS 3691-8:2012 | Industrial trucks. Safety requirements and verification Regional requirements for countries outside the European Community |
| I.S. EN 81-40:2008 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| UNI EN 81-31 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| I.S. EN 1501-5:2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
| I.S. EN ISO 13855:2010 | SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| CAN/CSA-C22.2 NO. 61010-1-12 (R2017) | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01) |
| UNE-EN 13411-4:2011 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
| ISO/TS 3691-8:2012 | Industrial trucks Safety requirements and verification Part 8: Regional requirements for countries outside the European Community |
| ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
| I.S. EN 15000:2008 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS |
| I.S. EN 15094:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| DIN EN 13208:2011-02 | Food processing machinery - Vegetable peelers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12853:2012-02 | Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
| DIN EN 13015:2008-12 | MAINTENANCE FOR LIFTS AND ESCALATORS - RULES FOR MAINTENANCE INSTRUCTIONS |
| DIN EN 12854:2010-12 | Food processing machinery - Beam mixers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13954:2010-12 | Food processing machinery - Bread slicers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13885:2011-02 | Food processing machinery - Clipping machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 14673:2010-10 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010) |
| BS EN ISO 12100-1 : 2003 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| BS EN ISO 11111-7 : 2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 7: DYEING AND FINISHING MACHINERY (ISO 11111-7:2005) |
| BS EN 1010-1 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| IEC 62135-1:2015 | Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation |
| DIN EN 14957:2010-11 | Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements (includes Amendment A1:2010) |
| IEC 61810-1:2015 | Electromechanical elementary relays - Part 1: General and safety requirements |
| BS EN 809 : 1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNE-EN 61010-1:2011 | Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| ISA 61010-1 : 2008 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| EN 809:1998+A1:2009 | Pumps and pump units for liquids - Common safety requirements |
| EN 16307-1:2013+A1:2015 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
| EN 81-40:2008 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| UNI EN 14655 : 2010 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 12100-1 : 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| UNI EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| UNI EN 1012-1 : 2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| UNI EN 13288 : 2010 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| ONORM EN 1034-4 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
| UNI EN 14710-1 : 2009 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 1846-2 : 2013 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
| UNI EN 809 : 2009 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNI EN 15095 : 2009 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| UNI EN 14957 : 2010 | FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12854 : 2010 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13621 : 2010 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13886 : 2010 | FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 614-1 : 2009 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| UNI EN 13954 : 2010 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13977 : 2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| UNI EN 13208 : 2010 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 14673 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| UNI EN 1845 : 2008 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12852 : 2010 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1010-2 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| UNI EN 953 : 2009 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
| UNI EN 13389 : 2010 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12851 : 2010 | FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS |
| ONORM EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| UNI EN 14656 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| BS OHSAS 18002:2008 | Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007 |
| UNI EN 1678 : 2010 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13885 : 2010 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13534 : 2010 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1760-2 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| UNI EN 1777 : 2010 | HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING |
| UNI EN 12044 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 1760-1 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| UNI EN 13570 : 2010 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1760-3 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| UNI EN 13675 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| UNI EN 13591 : 2010 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13015 : 2008 | MAINTENANCE FOR LIFTS AND ESCALATORS - RULES FOR MAINTENANCE INSTRUCTIONS |
| UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| UNI EN 13114 : 2010 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| UNI EN 14681 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| I.S. EN ISO 13857:2008 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
| BS EN 15093:2008 | Safety of machinery. Safety requirements for hot flat rolling mills |
| 12/30261704 DC | BS EN 60335-2-45 AMD1. Household and similar electrical appliances. Safety. Part 2-45. Particular requirements for portable heating tools and similar appliances |
| 09/30206303 DC : 0 | BS EN 60335-2-40 FPRAD - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| 08/30182164 DC : DRAFT MAY 2008 | BS ISO 31000 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES ON IMPLEMENTATION |
| UNI EN 1501-5 : 2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
| UNI ISO 15998 : 2008 | EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS FOR FUNCTIONAL SAFETY |
| UNI ISO 14798 : 2010 | LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY |
| PREN 848-3 : DRAFT 2010 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| 09/30206804 DC : 0 | BS EN 60335-1:2002/PRAF - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN 1501-5:2012-02 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| PD IEC/TR 62513:2008 | Safety of machinery. Guidelines for the use of communication systems in safety-related applications |
| 09/30175684 DC : 0 | BS EN 14673:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| PREN 81-21 : DRAFT 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILIDING |
| ISO 21789:2009 | Gas turbine applications — Safety |
| UNE-EN 81-41:2011 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| BS EN 1501-5:2011 | Refuse collection vehicles. General requirements and safety requirements Lifting devices for refuse collection vehicles |
| S.R. CLC/TS 61496-3:2008 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 3: PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO DIFFUSE REFLECTION (AOPDDR) |
| 09/30180832 DC : DRAFT AUG 2009 | BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT |
| DIN EN 15700:2012-01 | Safety for conveyor belts for winter sport or leisure use |
| BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
| EN 1034-1:2000+A1:2010 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
| DIN EN ISO 3266:2016-05 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
| 08/30185056 DC : DRAFT SEP 2008 | BS EN 15861 - FOOD PROCESSING MACHINERY - SMOKE FACILITIES - SAFETY AND HYGIENE REQUIREMENTS |
| 14/30304361 DC : 0 | BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS |
| BS PD ISO/TR 12296 : 2012 | ERGONOMICS - MANUAL HANDLING OF PEOPLE IN THE HEALTHCARE SECTOR |
| 14/30304379 DC : 0 | BS EN ISO 11111-7:2005/AMD 2 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 7: DYEING AND FINISHING MACHINERY |
| OHSAS 18002:2000 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| 08/30180551 DC : DRAFT APR 2008 | BS OHSAS 18002 - OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| 14/30287632 DC : 0 | BS EN ISO 12836:2012/AMD 1 - DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY |
| UNI EN ISO 13855 : 2010 | SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| 12/30261708 DC | BS EN 60335-2-99 AMD1. Household and similar electrical appliances. Safety. Part 2-99. Particular requirements for commercial electric hoods |
| 12/30261699 DC : DRAFT MAR 2012 | BS EN 60335-2-27 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-27: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN EXPOSURE TO ULTRAVIOLET AND INFRARED RADIATION |
| DIN EN 15288-2:2009-05 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| 09/30203783 DC : DRAFT NOV 2009 | BS ISO 12643-5 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 5: STAND-ALONE PLATEN PRESSES |
| UNI EN 15000 : 2009 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS |
| CSA ISO 14798:2012 | LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY |
| DIN EN 81-31:2010-08 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
| I.S. EN 81-43:2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| UNE-EN 15700:2012 | Safety for conveyor belts for winter sport or leisure use |
| I.S. EN 50325-5:2010 | INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 5: FUNCTIONAL SAFETY COMMUNICATION BASED ON EN 50325-4 |
| I.S. EN ISO 3266:2010 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010) |
| I.S. EN 60335-2-8:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES |
| ONORM EN 12312-5 : 2009 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| DIN EN 81-41:2016-06 (Draft) | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| I.S. EN 61010-1:2010 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| ISO/TR 23849:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
| ISO 12643-3:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems |
| ISO/TS 3691-7:2011 | Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community |
| UNI EN 15288-2 : 2009 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| EN 15288-2:2008 | Swimming pools - Part 2: Safety requirements for operation |
| ISO 12643-5:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Stand-alone platen presses |
| I.S. EN 81-31:2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| I.S. EN 62135-1:2015 | RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION |
| I.S. EN 15089:2009 | EXPLOSION ISOLATION SYSTEMS |
| ISO 15998:2008 | Earth-moving machinery Machine-control systems (MCS) using electronic components Performance criteria and tests for functional safety |
| I.S. EN 15166:2008 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| IEC TR 62513:2008 | Safety of machinery - Guidelines for the use of communication systems in safety-related applications |
| ISO 3691-5:2014 | Industrial trucks Safety requirements and verification Part 5: Pedestrian-propelled trucks |
| DIN EN 809:2012-10 | Pumps and pump units for liquids - Common safety requirements |
| DIN EN 13977:2011-04 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| DIN EN 13886:2011-02 | Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements (includes Amendment A1:2010) |
| PD IEC/TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children |
| BS EN 13885 : 2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 14655:2006 | Food processing machinery - Baguette slicers - Safety and hygiene requirements |
| BS EN ISO 11161 : 2007 | SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS |
| BS EN 13675 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| BS EN 13389 : 2005 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13621 : 2004 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| IEC TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children |
| ISO 3266:2010 | Forged steel eyebolts grade 4 for general lifting purposes |
| BS EN ISO 11111-6 : 2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 11111-6:2005) |
| BS EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing |
| BS EN 13208 : 2003 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 13288:2006 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
| BS EN 14710-1 : 2005 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| BS EN 13288 : 2005 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV | Safety of laser products - Part 4: Laser guards |
| UNE-EN 1539:2010 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| BS EN 13977:2011 | Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance |
| UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
| UNE-EN 13114:2002 | Tannery machines- Rotating process vessels - Safety requirements. |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| UNE-EN 1846-2:2011 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
| BS EN 13411-4:2011 | Terminations for steel wire ropes. Safety Metal and resin socketing |
| ONORM EN 12312-15 : 2009 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS |
| BS EN 1760-2 : 2001 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| BS EN 12044 : 2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| BS EN 13015 : 2001 | MAINTENANCE FOR LIFTS AND ESCALATORS - RULES FOR MAINTENANCE INSTRUCTIONS |
| BS EN 13114 : 2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| UNE-EN 13591:2006 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
| ISO 14798:2009 | Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology |
| ISO 12836:2015 | Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing accuracy |
| BS EN 1846-2 : 2009 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| UNE-EN 13389:2006 | Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements. |
| ISO 11161:2007 | Safety of machinery — Integrated manufacturing systems — Basic requirements |
| BS EN 13591 : 2005 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1760-1 : 1998 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| BS EN 12854 : 2003 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 15095:2009-06 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| EN 81-43:2009 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
| EN 13885:2005+A1:2010 | Food processing machinery - Clipping machines - Safety and hygiene requirements |
| EN 81-31:2010 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
| EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
| EN 14656:2006+A1:2010 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
| EN ISO 14798:2013 | Lifts (elevators), escalators and moving walks - Risk assessment and reduction methodology (ISO 14798:2009) |
| EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills |
| EN 13977:2011 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| EN 15000:2008 | Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
| EN 13591:2005+A1:2009 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
| EN 13015:2001+A1:2008 | Maintenance for lifts and escalators - Rules for maintenance instructions |
| EN 14957:2006+A1:2010 | Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 13954:2005+A1:2010 | Food processing machinery - Bread slicers - Safety and hygiene requirements |
| EN 13621:2004+A1:2010 | Food processing machinery - Salad dryers - Safety and hygiene requirements |
| EN 15166:2008 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
| EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills |
| EN 1760-3:2004+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
| EN 15700:2011 | Safety for conveyor belts for winter sport or leisure use |
| EN 15089:2009 | Explosion isolation systems |
| EN ISO 4414:2010 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| EN 14681:2006+A1:2010 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
| EN ISO 12836:2015 | Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy (ISO 12836:2015) |
| EN 14710-1:2005+A2:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements |
| EN 1845:2007 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| EN 14673:2006+A1:2010 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN ISO 13855:2010 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| EN 14655:2005+A1:2010 | Food processing machinery - Baguette slicers - Safety and hygiene requirements |
| ONORM EN 415-3 : 2010 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| EN 14677:2008 | Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
| EN 13886:2005+A1:2010 | Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements |
| EN 15095:2007+A1:2008 | Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements |
| EN 13390:2002+A1:2009 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements |
| EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| EN 1678:1998+A1:2010 | Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements |
| EN 1846-2:2009+A1:2013 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
| EN 12851:2005+A1:2010 | Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements |
| 10/30179839 DC : 0 | BS EN 1010-5:2005/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD |
| S.R. CLC/TR 62061-1:2010 | GUIDANCE ON THE APPLICATION OF ISO 13849-1 AND IEC 62061 IN THE DESIGN OF SAFETY-RELATED CONTROL SYSTEMS FOR MACHINERY |
| 11/30247811 DC : 0 | BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| BS EN 15997:2011 | All terrain vehicles (ATVs - Quads). Safety requirements and test methods |
| UNE-EN ISO 11161:2009 | Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007) |
| BS ISO 6966-2:2014 | Aircraft ground equipment. Basic requirements Safety requirements |
| BS EN ISO 4413:2010 | Hydraulic fluid power. General rules and safety requirements for systems and their components |
| I.S. EN 15997:2011 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 1010-2:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| 16/30339195 DC | BS EN 81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intended for use by persons with impaired mobility |
| DIN EN ISO 3691-5:2014-07 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: PEDESTRIAN-PROPELLED TRUCKS (ISO 3691-5:2014) |
| 09/30182299 DC : 0 | BS EN 1010-2:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| UNI EN 13411-8 : 2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING |
| DD ISO/TS 3691-7:2011 | Industrial trucks. Safety requirements and verification Regional requirements for countries within the European Community |
| 12/30246654 DC : DRAFT AUG 2012 | BS EN 16307-5 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - SUPPLEMENTARY REQUIREMENTS FOR PEDESTRIAN-PROPELLED TRUCKS |
| BIS IS/ISO 12643-1 : 2009 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 13411-8:2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING |
| BS EN 15700:2011 | Safety for conveyor belts for winter sport or leisure use |
| 08/30186475 DC : 0 | BS EN 13617-1 AMD1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| BS EN 50325-5:2010 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces Functional safety communication based on EN 50325-4 |
| CEI EN 50325-5 : 2012 | INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 5: FUNCTIONAL SAFETY COMMUNICATION BASED ON EN 50325-4 |
| BS EN 81-40:2008 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
| CSA ISO 14798 : 2012 : R2016 | LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY |
| CSA Z1002 : 2012 | OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL |
| DD CLC/TS 61496-3:2008 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR) |
| UNE-EN 60335-2-8:2016 | Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances |
| I.S. EN ISO 12836:2015 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
| UNI ISO 20898 : 2009 | INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS |
| BS EN 15288-2:2008 | Swimming pools Safety requirements for operation |
| CSA C22.2 No. 61010.1 : 2012 : FR | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 61010.1 :2012 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 14677:2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| ISO 6966-2:2014 | Aircraft ground equipment — Basic requirements — Part 2: Safety requirements |
| UNE-EN ISO 14798:2013 | Lifts (elevators), escalators and moving walks - Risk assessment and reduction methodology (ISO 14798:2009) |
| ONORM EN 1034-1 : NOV 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| UNI EN 15166 : 2009 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 61010-1:2010/A1:2019 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| BS EN 809:1998+A1:2009 | Pumps and pump units for liquids. Common safety requirements |
| DIN EN 13390:2011-02 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 13621:2011-02 | Food processing machinery - Salad dryers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13570:2011-02 | Food processing machinery - Mixing machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN ISO 11161:2010-10 | Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007 + Amd 1:2010); German version EN ISO 11161:2007 + A1:2010 |
| DIN EN 13534:2011-02 | Food processing machinery - Curing injection machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 614-1:2009-06 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| DIN EN 1760-2:2009-08 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| DIN EN 1760-1:2009-08 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| BS EN 14957 : 2006 | FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1845:2007 | Footwear manufacturing machines. Footwear moulding machines. Safety requirements |
| BS EN 62135-1:2015 | Resistance welding equipment Safety requirements for design, manufacture and installation |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| BS EN 14656 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| 10/30216944 DC : 0 | BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| BS EN 60825-4 : 2006 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| BS EN 1678 : 1998 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ISO/TR 12296:2012 | Ergonomics Manual handling of people in the healthcare sector |
| BS EN 1012-1:2010 | Compressors and vacuum pumps. Safety requirements Air compressors |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| BS EN 14655 : 2005 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13390 : 2002 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 14681 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| BS EN ISO 11111-5 : 2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 5: PREPARATORY MACHINERY TO WEAVING AND KNITTING (ISO 11111-5:2005) |
| ISO 13855:2010 | Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| DIN EN 953:1997-11 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
| DIN EN 1846-2:2013-05 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance (includes Amendment A1:2013) |
| DIN EN 13411-4:2011-06 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
| EN 13288:2005+A1:2009 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
| EN 50325-5:2010 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 5: Functional safety communication based on EN 50325-4 |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| ONORM EN 12312-7 : 2009 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIRCRAFT MOVEMENT EQUIPMENT |
| DIN EN 14710-1:2009-06 | Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements |
| DIN EN 81-41:2011-09 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| EN 1012-1:2010 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
| DIN EN 953:2009-07 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
| EN 13411-4:2011 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
| I.S. EN ISO 11161:2007 | SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS |
| EN 62135-1:2015/AC:2016-02 | RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION |
| EN 13570:2005+A1:2010 | Food processing machinery - Mixing machines - Safety and hygiene requirements |
| EN 13389:2005+A1:2009 | Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements |
| EN 13411-8:2011 | Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging |
| UNE-EN 809:1999 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNE-EN 13390:2002 | Food processing machinery- Pie and tart machines - Safety and hygiene requirements. |
| UNE-EN 1673:2001 | Food procesing machinery. Rotatory rack ovens. Safety and hygiene requirements. |
| UNE-EN 12044:2006 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
| ISO/TR 14121-2:2012 | Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.