ISO 80000-1:2009
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Quantities and units — Part 1: General
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
06-12-2022
Superseded by
Published date
17-11-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 80000-1:2009 gives general information and definitions concerning quantities, systems of quantities, units, quantity and unit symbols, and coherent unit systems, especially the International System of Quantities, ISQ, and the International System of Units, SI.
The principles laid down in ISO 80000-1:2009 are intended for general use within the various fields of science and technology and as an introduction to other parts of the Quantities and units series.
Ordinal quantities and nominal properties are outside the scope of ISO 80000-1:2009.
| DevelopmentNote |
Supersedes ISO 1000 and ISO 31-0. (11/2009) DRAFT ISO/DIS 80000-1 is also available for this standard. (02/2017)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 80000-1 : 2016 | Identical |
| NF EN ISO 80000-1 : 2013 | Identical |
| NBN EN ISO 80000-1 : 2013 | Identical |
| NEN EN ISO 80000-1 : 2013 | Identical |
| NS EN ISO 80000-1 : 2013 | Identical |
| I.S. EN ISO 80000-1:2013 | Identical |
| PN EN ISO 80000-1 : 2013 | Identical |
| SN EN ISO 80000-1 : 2013 | Identical |
| UNI CEI EN ISO 80000-1 : 2013 | Identical |
| SS-EN ISO 80000-1:2013 | Identical |
| BIS IS/ISO 80000-1 : 2009 | Identical |
| UNE-EN ISO 80000-1:2014 | Identical |
| BS EN ISO 80000-1:2013 | Identical |
| CEI UNI ISO 80000-1 : 2010 | Identical |
| CEI UNI EN ISO 80000-1 : 1ED 2013 | Identical |
| EN ISO 80000-1:2013 | Identical |
| DIN EN ISO 80000-1:2013-08 | Identical |
| DS EN ISO 80000-1 : 2013 | Identical |
| DS ISO 80000-1 : 2009 | Identical |
| UNI CEI ISO 80000-1 : 2010 | Identical |
| NEN ISO 80000-1 : 2009 C1 2011 | Identical |
| NF EN ISO 3580 : 2017 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION |
| IEC 63041-2:2017 | Piezoelectric sensors - Part 2: Chemical and biochemical sensors |
| BS ISO 10676:2010 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen |
| 06/30148641 DC : DRAFT SEP 2006 | IEC 60050-112 ED1 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 112: QUANTITIES AND UNITS |
| 17/30351098 DC : 0 | BS EN ISO 24373 - WELDING CONSUMABLES - SOLID WIRES AND RODS FOR FUSION WELDING OF COPPER AND COPPER ALLOYS - CLASSIFICATION |
| 11/30250538 DC : 0 | BS EN ISO 18275 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| UNE-EN 60079-1:2015 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| 16/30330977 DC : 0 | BS EN 50242 - ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - TEST METHODS FOR MEASURING THE PERFORMANCE |
| BS EN ISO 27509:2012 | Petroleum and natural gas industries. Compact flanged connections with IX seal ring |
| 12/30265264 DC : DRAFT AUG 2012 | BS EN 14700 - WELDING CONSUMABLES - WELDING CONSUMABLES FOR HARD-FACING |
| BS ISO 13643-2:2017 | Ships and marine technology. Manoeuvring of ships Turning and yaw checking |
| 15/30272880 DC : 0 | BS EN ISO 17777 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF COPPER AND COPPER ALLOYS - CLASSIFICATION |
| BS ISO 14629 : 2012 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FLOWABILITY OF CERAMIC POWDERS |
| DIN EN ISO 3580:2017-08 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 3580:2017) |
| ISO/TS 17536-3:2014 | Road vehicles — Aerosol separator performance test for internal combustion engines — Part 3: Method to perform engine gravimetric test |
| BS EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Requirements for measuring instruments |
| BS EN ISO 17632:2015 | Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels. Classification |
| BS ISO 19973-1:2015 | Pneumatic fluid power. Assessment of component reliability by testing General procedures |
| 16/30323859 DC : 0 | BS ISO 22201-2 - LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - PROGRAMMABLE ELECTRONIC SYSTEMS IN SAFETY RELATED APPLICATIONS - PART 2: ESCALATORS AND MOVING WALKS (PESSRAE) |
| 16/30331298 DC : 0 | BS ISO 16630 - METALLIC MATERIALS - SHEET AND STRIP - HOLE EXPANDING TEST |
| IEC 62884-3:2018 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods |
| ISO 16525-3:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 3: Determination of heat-transfer properties |
| ISO 17340:2014 | Metallic materials Ductility testing High speed compression test for porous and cellular metals |
| 16/30342683 DC : 0 | BS EN ISO 80000-2 - QUANTITIES AND UNITS - PART 2: MATHEMATICS |
| 13/30250817 DC : 0 | BS ISO 6953-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS |
| DIN EN ISO 17769-1:2012-11 | LIQUID PUMPS AND INSTALLATION - GENERAL TERMS, DEFINITIONS, QUANTITIES, LETTER SYMBOLS AND UNITS - PART 1: LIQUID PUMPS (ISO 17769-1:2012) |
| DIN EN ISO 11357-4 E : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014) |
| 16/30343189 DC : 0 | BS ISO 13643-1 - SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 1: GENERAL CONCEPTS, QUANTITIES AND TEST CONDITIONS |
| NF EN ISO 23145-2 : 2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 2: UNTAPPED DENSITY |
| ISO/TR 16194:2017 | Pneumatic fluid power Assessment of component reliability by accelerated life testing General guidelines and procedures |
| I.S. EN 61121:2013 | TUMBLE DRYERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE (IEC 61121:2012 (MOD)) |
| DIN ISO 9277:2014-01 | DETERMINATION OF THE SPECIFIC SURFACE AREA OF SOLIDS BY GAS ADSORPTION - BET METHOD (ISO 9277:2010) |
| BS ISO 22201-2:2013 | Lifts (elevators), escalators and moving walks. Programmable electronic systems in safety related applications Escalators and moving walks (PESSRAE) |
| DIN EN 12449:2015-11 (Draft) | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| BS EN 62575-1:2016 | Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Generic specification |
| BS EN ISO 12153:2012 | Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys. Classification |
| PREN 764-1 : DRAFT 2013 | PRESSURE EQUIPMENT - PART 1: VOCABULARY |
| 12/30257842 DC : 0 | BS ISO 27327-2 - FANS - AIR CURTAIN UNITS - PART 2: LABORATORY METHODS OF TESTING FOR SOUND POWER |
| BS ISO 17411:2014 | Optics and photonics. Optical materials and components. Test method for homogeneity of optical glasses by laser interferometry |
| 15/30287681 DC : 0 | BS ISO 3581 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
| PD ISO/TS 17518:2015 | Medical laboratories. Reagents for staining biological material. Guidance for users |
| BS ISO 16630:2017 | Metallic materials. Sheet and strip. Hole expanding test |
| ISO 19973-1:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 1: General procedures |
| ISO 17411:2014 | Optics and photonics — Optical materials and components — Test method for homogeneity of optical glasses by laser interferometry |
| 13/30285580 DC : 0 | BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS |
| BS IEC 62679-1-1:2014 | Electronic paper displays Terminology |
| BS ISO 13175-3:2012 | Implants for surgery. Calcium phosphates Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| I.S. EN ISO 17777:2016 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF COPPER AND COPPER ALLOYS - CLASSIFICATION (ISO 17777:2016) |
| 17/30339389 DC : 0 | BS ISO 8601-2 - DATA ELEMENTS AND INTERCHANGE FORMATS - INFORMATION INTERCHANGE - REPRESENTATION OF DATES AND TIMES - PART 2: EXTENSIONS |
| BS ISO 20032:2013 | Method for evaluation of tensile properties of metallic superplastic materials |
| 16/30325028 DC : 0 | BS ISO 29802 - ALL TERRAIN (AT) TYRES AND RIMS - SYMBOL MARKED PNEUMATIC TYRES ON 5 DEGREES TAPERED RIMS - DESIGNATION, DIMENSION, MARKING AND LOAD RATINGS |
| IEC 60350-2:2017 | Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
| BS EN 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
| UNI EN 13600 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| 11/30251682 DC : 0 | BS EN 1977 - COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| CSA C22.2 No. 60079.1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| 12/30258880 DC : 0 | BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS |
| BS EN 60539-1:2016 | Directly heated negative temperature coefficient thermistors Generic specification |
| 12/30267658 DC : 0 | BS EN ISO 21809-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION BONDED EPOXY COATINGS |
| BS EN 60679-1:2017 | Piezoelectric, dielectric and electrostatic oscillators of assessed quality Generic specification |
| BS EN 62884-1:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement |
| 12/30262118 DC | BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| DIN EN ISO 17632:2016-05 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION (ISO 17632:2015) |
| BS ISO 17340:2014 | Metallic materials. Ductility testing. High speed compression test for porous and cellular metals |
| BS EN 60384-1:2016 | Fixed capacitors for use in electronic equipment Generic specification |
| DIN EN ISO 80000-9:2013-08 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
| ISO 13643-4:2017 | Ships and marine technology — Manoeuvring of ships — Part 4: Stopping, acceleration, traversing |
| IEC TR 62354:2014 | General testing procedures for medical electrical equipment |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| CSA NGV1 : 2017 | COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
| UNI EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| UNI EN 13605 : 2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| EN 60350-2:2018 | Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
| BS EN ISO 3581:2012 | Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification |
| I.S. EN ISO 14171:2016 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE/FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION (ISO 14171:2016) |
| BS EN ISO 24598:2012 | Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels. Classification |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| ISO 13179-1:2014 | Implants for surgery Plasma-sprayed unalloyed titanium coatings on metallic surgical implants Part 1: General requirements |
| BS EN ISO 21809-1:2011 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP) |
| AWS A5.34/A5.34M : 2013 | SPECIFICATION FOR NICKEL-ALLOY ELECTRODES FOR FLUX CORED ARC WELDING |
| AWS A5.21/A5.21M:2011 | SPECIFICATION FOR BARE ELECTRODES AND RODS FOR SURFACING |
| I.S. EN ISO 3580:2017 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 3580:2017) |
| AWS A5.23/A5.23M : 2011 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| AWS A5.13/A5.13M : 2010 | SPECIFICATION FOR SURFACING ELECTRODES FOR SHIELDED METAL ARC WELDING |
| I.S. EN ISO 10628-1:2015 | DIAGRAMS FOR THE CHEMICAL AND PETROCHEMICAL INDUSTRY - PART 1: SPECIFICATION OF DIAGRAMS (ISO 10628-1:2014) |
| I.S. EN 60456:2016 | CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| ISO/TR 13519:2012 | Guidance on the development and use of ISO statistical publications supported by software |
| I.S. EN ISO 13349:2010 | FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES |
| AWS A5.9/A5.9M : 2012 | SPECIFICATION FOR BARE STAINLESS STEEL WELDING ELECTRODES AND RODS |
| ISO 14188:2012 | Metallic and other inorganic coatings — Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings |
| CSA HPIT 2-2017 | Dispensing systems and components for fueling hydrogen powered industrial trucks |
| I.S. EN ISO 21809-5:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017) |
| I.S. EN IEC 63041-1:2018 | PIEZOELECTRIC SENSORS - PART 1: GENERIC SPECIFICATIONS |
| I.S. EN ISO 3690:2012 | WELDING AND ALLIED PROCESSES - DETERMINATION OF HYDROGEN CONTENT IN ARC WELD METAL (ISO 3690:2012) |
| I.S. EN ISO 14174:2012 | WELDING CONSUMABLES - FLUXES FOR SUBMERGED ARC WELDING AND ELECTROSLAG WELDING - CLASSIFICATION (ISO 14174:2012) |
| I.S. EN 16245-1:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 1: GENERAL REQUIREMENTS |
| EN IEC 63041-1:2018 | Piezoelectric sensors - Part 1: Generic specifications |
| BS EN ISO 17672:2016 | Brazing. Filler metals |
| ISO/TS 11602-1:2010 | Fire protection — Portable and wheeled fire extinguishers — Part 1: Selection and installation |
| I.S. EN 62595-1-1:2013 | LCD BACKLIGHT UNIT - PART 1-1: GENERIC SPECIFICATION (IEC 62595-1-1:2013 (EQV)) |
| I.S. EN 61591:1998 | HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE |
| UNE-EN ISO 21952:2013 | Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012) |
| PREN 1977 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| ISO 4000-1:2015 | Passenger car tyres and rims Part 1: Tyres (metric series) |
| CSA LNG 2-2017 | LIQUEFIED NATURAL GAS VEHICLE FUEL CONTAINERS |
| BS ISO 2597-2:2015 | Iron ores. Determination of total iron content Titrimetric methods after titanium(III) chloride reduction |
| IEC 62391-1:2015 | Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification |
| BS ISO 10204:2017 | Iron ores. Determination of magnesium. Flame atomic absorption spectrometric method |
| I.S. EN 62575-1:2016 | RADIO FREQUENCY (RF) BULK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| ISO 5393:2017 | Rotary tools for threaded fasteners — Performance test method |
| I.S. EN 61987-24-2:2017 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-2: LIST OF PROPERTIES (LOPS) OF VALVE/ACTUATOR ACCESSORIES FOR ELECTRONIC DATA EXCHANGE |
| ISO 22197-2:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 2: Removal of acetaldehyde |
| BS EN ISO 3690:2012 | Welding and allied processes. Determination of hydrogen content in arc weld metal |
| DIN EN ISO 3690:2012-07 | WELDING AND ALLIED PROCESSES - DETERMINATION OF HYDROGEN CONTENT IN ARC WELD METAL (ISO 3690:2012) |
| PD ISO/TS 13499:2014 | Road vehicles. Multimedia data exchange format for impact tests |
| UNI EN ISO 18275 : 2012 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION |
| ISO 50002:2014 | Energy audits Requirements with guidance for use |
| BS EN ISO 14174:2012 | Welding consumables. Fluxes for submerged arc welding and electroslag welding. Classification |
| UNI EN ISO 14174 : 2012 | WELDING CONSUMABLES - FLUXES FOR SUBMERGED ARC WELDING AND ELECTROSLAG WELDING - CLASSIFICATION |
| UNE-EN ISO 21809-5:2018 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| ISO 16220:2017 | Magnesium and magnesium alloys — Magnesium alloy ingots and castings |
| UNE-EN ISO 14341:2011 | Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010) |
| UNE-EN ISO 19288:2016 | Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification (ISO 19288:2016) |
| BS ISO 22197-3:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of toluene |
| UNI EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| ISO 18071:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of antiviral activity of semiconducting photocatalytic materials under indoor lighting environment — Test method using bacteriophage Q-beta |
| ISO 22197-3:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 3: Removal of toluene |
| IEC PAS 63125:2017 | Clothes washing machines for commercial use - Methods for measuring the performance |
| AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| EN 12167:2016 | Copper and copper alloys - Profiles and bars for general purposes |
| EN 12165:2016 | Copper and copper alloys - Wrought and unwrought forging stock |
| AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| DIN EN 13605:2013-09 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| DIN EN 13599:2014-12 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| DIN EN ISO 717-1:2013-06 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2013) |
| DIN EN ISO 6848:2015-12 | Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015); German version EN ISO 6848:2015 |
| DIN EN 1982:2016-01 (Draft) | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
| DIN EN 13602:2013-09 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| DIN EN 13604:2013-09 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| BS EN 13600:2013 | Copper and copper alloys. Seamless copper tubes for electrical purposes |
| BS EN ISO 2560:2009 | Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification |
| BS EN 14700:2014 | Welding consumables. Welding consumables for hard-facing |
| UNE-EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| UNE-EN ISO 2560:2010 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
| IEC 60079-35-2:2011 | Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters |
| BS EN ISO 13686:2013 | Natural gas. Quality designation |
| BS EN 60825-1:2014 | Safety of laser products Equipment classification and requirements |
| BS EN 1976:2012 | Copper and copper alloys. Cast unwrought copper products |
| UNE-EN 1976:2013 | Copper and copper alloys - Cast unwrought copper products |
| BS EN ISO 11960:2014 | Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
| UNE-EN ISO 6976:2017 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| UNE-EN ISO 17777:2016 | Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification (ISO 17777:2016) |
| ISO 21952:2012 | Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels — Classification |
| BS EN ISO 6976:2005 | Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition |
| BS ISO 12829:2016 | Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope |
| BS EN 12420:2014 | Copper and copper alloys. Forgings |
| UNE-EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
| BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
| I.S. EN 13601:2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| UNI EN ISO 24034 : 2011 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID WIRES AND RODS FOR FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS - CLASSIFICATION |
| I.S. EN 14700:2014 | WELDING CONSUMABLES - WELDING CONSUMABLES FOR HARD-FACING |
| I.S. EN ISO 13686:2013 | NATURAL GAS - QUALITY DESIGNATION (ISO 13686:2013) |
| I.S. EN 13148:2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| I.S. EN 14870-1:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
| DIN EN ISO 636:2017-09 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017) |
| IEC 60384-1:2016 RLV | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| EN 12166:2016 | Copper and copper alloys - Wire for general purposes |
| DIN EN ISO 14174:2012-05 | WELDING CONSUMABLES - FLUXES FOR SUBMERGED ARC WELDING AND ELECTROSLAG WELDING - CLASSIFICATION (ISO 14174:2012) |
| EN ISO 16834:2012 | Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012) |
| EN 12438:2017 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| EN 12421:2017 | Magnesium and magnesium alloys - Unalloyed magnesium |
| EN ISO 14343:2017 | Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017) |
| DIN EN ISO 14343:2017-08 | WELDING CONSUMABLES - WIRE ELECTRODES, STRIP ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION (ISO 14343:2017) |
| EN 60793-1-1:2017 | Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance |
| DIN EN ISO 18276:2017-07 | Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017) |
| EN ISO 21952:2012 | Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012) |
| EN ISO 17672:2016 | Brazing - Filler metals (ISO 17672:2016) |
| DIN EN ISO 3580:2011-05 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 3580:2017) |
| EN ISO 17634:2015 | Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015) |
| EN ISO 18276:2017 | Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017) |
| EN 12451:2012 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| EN 50242:2016 | Electric dishwashers for household use - Methods for measuring the performance |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN ISO 19001:2013 | In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology (ISO 19001:2013) |
| ONORM EN 14700 : 2014 | WELDING CONSUMABLES - WELDING CONSUMABLES FOR HARD-FACING |
| CSA HGV 4.9 : 2016 | HYDROGEN FUELING STATIONS |
| DIN EN ISO 12153:2012-07 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2011) |
| PREN 13605 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| EN 13600:2013 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| ES 202 642 : 1.1.1 | HUMAN FACTORS (HF); PERSONALIZATION OF EHEALTH SYSTEMS BY USING EHEALTH USER PROFILES (EHEALTH) |
| CEI UNI EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| 15/30314904 DC : 0 | BS EN ISO 18276 - WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS-SHIELDED AND NON-GAS-SHIELDED METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION |
| PREN 13601 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| 12/30243456 DC : DRAFT MAR 2012 | BS ISO 16249 - SPRINGS - SYMBOLS |
| DIN EN ISO 6892-2:2011-05 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| UNE-EN ISO 14343:2017 | Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017) |
| I.S. EN ISO 13123:2011 | METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT (ISO 13123:2011) |
| BS EN 60939-3:2015 | Passive filter units for electromagnetic interference suppression Passive filter units for which safety tests are appropriate |
| 10/30214897 DC : 0 | BS ISO 3898 - BASES FOR DESIGN OF STRUCTURES - NAMES AND SYMBOLS OF PHYSICAL QUANTITIES - GENERIC QUANTITIES |
| BS ISO 8287:2011 | Magnesium and magnesium alloys. Unalloyed magnesium. Chemical composition |
| UNE-EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| BS EN 60350-1:2016 | Household electric cooking appliances Ranges, ovens, steam ovens and grills — Methods for measuring performance (IEC 60350-1:2016, modified) |
| 15/30300738 DC : DRAFT MAY 2015 | BS EN 60027-2 ED 4.0 - LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS |
| BS ISO 18535:2016 | Diamond-like carbon films. Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method |
| ISO 3581:2016 | Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification |
| 14/30287696 DC : 0 | BS EN ISO 17634 - WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION |
| DIN ISO 13643-2:2015-10 | SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 2: TURNING AND YAW CHECKING (ISO 13643-2:2013) |
| 10/30233138 DC : 0 | BS EN ISO 21952 - WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS-SHIELDED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION |
| AOP 20 : 2017 | SAFETY, ARMING AND FUNCTIONING SYSTEMS MANUAL OF TESTS |
| 13/30257993 DC : 0 | BS EN ISO 6892-3 - METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE |
| PD ISO/IEC GUIDE 37:2012 | Instructions for use of products by consumers |
| 15/30284685 DC : 0 | BS ISO 18762 - TUBES OF TITANIUM AND TITANIUM ALLOYS - WELDED TUBES FOR CONDENSERS AND HEAT EXCHANGERS - TECHNICAL DELIVERLY CONDITIONS |
| PD ISO/TR 13014:2012 | Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| 11/30243718 DC : 0 | BS EN 61121 ED 4.0 - TUMBLE DRYERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| 16/30338749 DC : 0 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| 16/30346829 DC : 0 | BS ISO 16038 - MALE CONDOMS - GUIDANCE ON THE USE OF ISO 4074 AND ISO 23409 IN THE QUALITY MANAGEMENT CONDOMS |
| 17/30293100 DC : 0 | BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| UNI EN ISO 19001 : 2013 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY |
| 16/30334068 DC : 0 | BS ISO 8178-4 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 4: STEADY-STATE TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS |
| BS EN 50242:2016 | Electric dishwashers for household use. Methods for measuring the performance |
| BS ISO 80000-9 : 2009 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
| 11/30199648 DC : DRAFT MAY 2011 | BS ISO 13125 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIFUNGAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS |
| UNI CEI ISO 80000-2 : 2010 | QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY |
| ONORM EN ISO 11357-4 : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014) |
| 17/30314224 DC : 0 | BS ISO 12103-3 - ROAD VEHICLES - TEST CONTAMINANTS FOR FILTER EVALUATION - PART 3: SOOT AEROSOL |
| BS ISO 19973-2:2015 | Pneumatic fluid power. Assessment of component reliability by testing Directional control valves |
| 16/30337558 DC : 0 | BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT AND RADIATION |
| BS ISO 29802:2017 | All-terrain (AT) tyres and rims. Symbol marked pneumatic tyres on 5° tapered rims. Designation, dimension, marking and load ratings |
| 11/30217708 DC : 0 | BS ISO 14628 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ROLLING CONTACT FATIGUE OF SILICON NITRIDE CERAMICS AT ROOM TEMPERATURE BY BALLS-ON-FLAT METHOD |
| BS EN ISO 25239-4:2011 | Friction stir welding. Aluminium Specification and qualification of welding procedures |
| BS ISO 27327-2:2014 | Fans. Air curtain units Laboratory methods of testing for sound power |
| I.S. EN 60705:2015 | HOUSEHOLD MICROWAVE OVENS - METHODS FOR MEASURING PERFORMANCE |
| BS EN 4500-001:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules |
| BS EN 62714-1:2014 | Engineering data exchange format for use in industrial automation systems engineering Architecture and General Requirements |
| 16/30297082 DC : 0 | BS EN ISO 80000-5 - QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
| I.S. EN 61400-25-2:2015 | WIND TURBINES - PART 25-2: COMMUNICATIONS FOR MONITORING AND CONTROL OF WIND POWER PLANTS - INFORMATION MODELS |
| 17/30309582 DC : 0 | BS EN 60350-2 ED 2.0 - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
| CEI UNI ISO 80000-7 : 2009 | QUANTITIES AND UNITS - PART 7: LIGHT |
| PREN 12438 : DRAFT 2015 | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| EN 60939-3:2015/AC:2016-04 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE (IEC 60939-3:2015/COR1:2016) |
| I.S. EN 50229:2015 | ELECTRIC CLOTHES WASHER-DRYERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
| PD ISO/TR 16194:2017 | Pneumatic fluid power. Assessment of component reliability by accelerated life testing. General guidelines and procedures |
| UNI EN ISO 13123 : 2012 | METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT |
| PD ISO/TS 17536-2:2017 | Road vehicles. Aerosol separator performance test for internal combustion engines Laboratory test method |
| 12/30261889 DC : 0 | BS EN 12420 - COPPER AND COPPER ALLOYS - FORGINGS |
| UNE-EN 60793-1-1:2017 | Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance |
| IEC 62391-1:2015 RLV | Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification |
| DIN EN 16481:2014-09 | TIMBER STAIRS - STRUCTURAL DESIGN |
| CAN/CSA-ISO/IEC 11179-1:16 | Information technology - Metadata registries (MDR) - Part 1: Framework (Adopted ISO/IEC 11179-1:2015, third edition, 2015-12-15) |
| 13/30274227 DC : 0 | BS EN 764-1 - PRESSURE EQUIPMENT - PART 1: VOCABULARY |
| BS EN 61400-25-2:2015 | Wind turbines Communications for monitoring and control of wind power plants - Information models |
| BS ISO 13179-1:2014 | Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants General requirements |
| PREN 50242 : DRAFT 2015 | ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - TEST METHODS FOR MEASURING THE PERFORMANCE (IEC 60436:2004, MODIFIED + A2:2012, MODIFIED + A1:2009, MODIFIED) |
| 11/30193150 DC : 0 | BS EN 60601-1:2006 AMD.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| BS ISO 18762:2016 | Tubes of titanium and titanium alloys. Welded tubes for condensers and heat exchangers. Technical delivery conditions |
| BS ISO 14817-1:2015 | Intelligent transport systems. ITS central data dictionaries Requirements for ITS data definitions |
| BS EN 61987-24-3:2017 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) of flow modification accessories for electronic data exchange |
| BS EN ISO 21809-5:2017 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings |
| 17/30313373 DC : 0 | BS ISO 21809-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 11: COATING REPAIRS ON REHABILITATION |
| 10/30233135 DC : 0 | BS EN ISO 24598 - WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE/FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION |
| UNI EN 4500-001 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| BS EN ISO 6892-3:2015 | Metallic materials. Tensile testing Method of test at low temperature |
| 11/30196213 DC : 0 | BS ISO 12817 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF OPENHOLE COMPRESSION STRENGTH |
| PD CLC/TS 50594:2015 | Tumble dryers for commercial use. Methods for measuring the performance |
| BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
| BS EN 60079-35-2:2012 | Explosive atmospheres Caplights for use in mines susceptible to firedamp. Performance and other safety-related matters |
| PREN 13600 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| 17/30346428 DC : 0 | BS ISO/IEC 19086-2 - INFORMATION TECHNOLOGY - CLOUD COMPUTING - SERVICE LEVEL AGREEMENT (SLA) FRAMEWORK - PART 2: METRIC MODEL |
| 11/30239433 DC : 0 | BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| CSA ISO 14341 : 2011 | WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| BS ISO 20378 : 2017 | WELDING CONSUMABLES - RODS FOR GAS WELDING OF NON-ALLOY AND CREEP-RESISTING STEELS - CLASSIFICATION |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| ISO 17536-1:2015 | Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General |
| PREN 13107 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
| UNI EN ISO 1628-1 : 2012 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES |
| I.S. EN ISO 14604:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF FRACTURE STRAIN (ISO 14604:2012) |
| ISO 24598:2012 | Welding consumables Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels Classification |
| CAN/CSA-Z614:2014(R2019) | CHILDREN'S PLAYSPACES AND EQUIPMENT |
| I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| DIN EN ISO 16061:2015-09 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| CSA ISO 14341 : 2011 : R2016 | WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| UNE-EN ISO 16834:2012 | Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012) |
| I.S. EN ISO 544:2017 | WELDING CONSUMABLES - TECHNICAL DELIVERY CONDITIONS FOR FILLER MATERIALS AND FLUXES - TYPE OF PRODUCT, DIMENSIONS, TOLERANCES AND MARKINGS (ISO 544:2017) |
| CEI EN 61786-1 : 2014 | MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS |
| UNI EN 16245-1 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 1: GENERAL REQUIREMENTS |
| AWS A5.35/A5.35M : 2015 | SPECIFICATION FOR COVERED ELECTRODES FOR UNDERWATER WET SHIELDED METAL ARC WELDING |
| AWS A5.8/A5.8M : 2013 | SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING |
| AWS A5.22/A5.22M : 2012 | SPECIFICATION FOR STAINLESS STEEL FLUX CORED AND METAL CORED WELDING ELECTRODES AND RODS |
| UNE-EN 60079-35-2:2013 | Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters |
| AWS A5.32/A5.32M : 2011 | WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES |
| BS EN 60115-1 : 2011 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| ISO 3690:2012 | Welding and allied processes Determination of hydrogen content in arc weld metal |
| BS ISO/IEC 11179-1:2015 | Information technology. Metadata registries (MDR) Framework |
| EN 62884-2:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 2: Phase jitter measurement method |
| UNI CEI ISO 80000-9 : 2010 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
| BS EN ISO 80000-2:2013 | Quantities and units Mathematical signs and symbols to be used in the natural sciences and technology |
| EN 62884-1:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement |
| I.S. EN 60115-8:2012 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS (IEC 60115-8:2009 (MOD)) |
| I.S. EN 12449:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| CEI EN 60679-1 : 2009 | PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| BS ISO 5011 : 2014 | INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS - PERFORMANCE TESTING |
| ISO 18405:2017 | Underwater acoustics — Terminology |
| ISO 7503-3:2016 | Measurement of radioactivity Measurement and evaluation of surface contamination Part 3: Apparatus calibration |
| UNI EN ISO 6892-2 : 2011 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
| ISO 22745-11:2010 | Industrial automation systems and integration Open technical dictionaries and their application to master data Part 11: Guidelines for the formulation of terminology |
| DIN EN 12421:2015-12 (Draft) | MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM |
| DIN EN ISO 17633:2016-02 (Draft) | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES AND RODS FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
| NF EN ISO 544 : 2017 | WELDING CONSUMABLES - TECHNICAL DELIVERY CONDITIONS FOR FILLER MATERIALS AND FLUXES - TYPE OF PRODUCT, DIMENSIONS, TOLERANCES AND MARKINGS |
| NF ISO 80000-2 : 2010 | QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY |
| 17/30356400 DC : 0 | BS EN 17116-4 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 4: WASHER-EXTRACTORS |
| UNI EN ISO 24598 : 2012 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE/FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION |
| ISO 18275:2011 | Welding consumables Covered electrodes for manual metal arc welding of high-strength steels Classification |
| I.S. EN 61987-24-3:2017 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-3: LISTS OF PROPERTIES (LOPS) OF FLOW MODIFICATION ACCESSORIES FOR ELECTRONIC DATA EXCHANGE |
| IEC 60539-1:2016 | Directly heated negative temperature coefficient thermistors - Part 1: Generic specification |
| ISO 16525-2:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 2: Determination of electrical characteristics for use in electronic assemblies |
| BS EN ISO 544:2017 | Welding consumables. Technical delivery conditions for filler materials and fluxes. Type of product, dimensions, tolerances and markings |
| UNE-EN 50229:2016 | Electric clothes washer-dryers for household use - Methods of measuring the performance |
| BS EN ISO 80000-10:2013 | Quantities and units Atomic and nuclear physics |
| W48-18 | Filler metals and allied materials for metal arc welding |
| UNI EN ISO 17769-1 : 2012 | LIQUID PUMPS AND INSTALLATION - GENERAL TERMS, DEFINITIONS, QUANTITIES, LETTER SYMBOLS AND UNITS - PART 1: LIQUID PUMPS |
| I.S. EN ISO 27509:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012) |
| ISO 29802:2017 | All-terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degree tapered rims — Designation, dimension, marking and load ratings |
| ISO/IEC 11179-1:2015 | Information technology — Metadata registries (MDR) — Part 1: Framework |
| ONORM EN ISO 3690 : 2012 | WELDING AND ALLIED PROCESSES - DETERMINATION OF HYDROGEN CONTENT IN ARC WELD METAL (ISO 3690:2012) |
| EN ISO 17633:2018 | Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2017) |
| ISO 15633:2017 | Iron ores — Determination of nickel — Flame atomic absorption spectrometric method |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| ANSI/AAMI/IEC TIR62354:2015 | GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT |
| EN 61591:1997/A12:2015 | HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE (IEC 61591:1997) |
| EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
| EN 60705:2015 | Household microwave ovens - Methods for measuring performance |
| IEC 61121:2012 | Tumble dryers for household use - Methods for measuring the performance |
| AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| IEC 61987-24-2:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
| NF EN ISO 24034 : 2010 | WELDING CONSUMABLES - SOLID WIRES AND RODS FOR FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS - CLASSIFICATION |
| DIN EN 12438:2015-12 (Draft) | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| DIN EN ISO 717-2:2013-06 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
| DIN EN 1520:2011-06 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| DIN EN ISO 16834:2012-08 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 16834:2012) |
| DIN EN 13107:2015-09 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
| DIN EN ISO 1071:2016-05 | WELDING CONSUMABLES - COVERED ELECTRODES, WIRES, RODS AND TUBULAR CORED ELECTRODES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION (ISO 1071:2015) |
| DIN EN 1559-1:2011-05 | Founding - Technical conditions of delivery - Part 1: General |
| DIN EN 12167:2015-12 (Draft) | COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
| DIN EN 14700:2014-07 | Welding consumables - Welding consumables for hard-facing |
| DIN EN 12168:2015-12 (Draft) | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| DIN EN 12165:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
| DIN EN 12164:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
| DIN EN 12163:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
| IEC 60793-1-1:2017 | Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance |
| BS EN 12450:2012 | Copper and copper alloys. Seamless, round copper capillary tubes |
| UNE-EN ISO 13686:2014 | Natural gas - Quality designation (ISO 13686:2013) |
| UNE-EN 50242:2016 | Electric dishwashers for household use - Methods for measuring the performance |
| BS EN ISO 14343:2017 | Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification |
| ISO 23145-2:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 2: Untapped density |
| BS EN 12163:2011 | Copper and copper alloys. Rod for general purposes |
| UNE-EN 1977:2013 | Copper and copper alloys - Copper drawing stock (wire rod) |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| CSA HPIT 1 : 2015 | COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| CSA HPIT 1:15 (R2020) | Compressed hydrogen powered industrial truck on-board fuel storage and handling components |
| ISO 6848:2015 | Arc welding and cutting Nonconsumable tungsten electrodes Classification |
| BS EN 1172:2011 | Copper and copper alloys. Sheet and strip for building purposes |
| ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
| IEC 60440:2012 | Method of measurement of non-linearity in resistors |
| BS EN ISO 6848:2015 | Arc welding and cutting. Nonconsumable tungsten electrodes. Classification |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| ISO 24034:2010 | Welding consumables Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys Classification |
| UNE-EN ISO 1071:2016 | Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015) |
| BS EN 13148:2010 | Copper and copper alloys. Hot-dip tinned strip |
| BS EN ISO 15791-1:2013 | Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance |
| UNE-EN ISO 6848:2015 | Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015) |
| EN ISO 2560:2009 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
| I.S. EN 12450:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| I.S. EN 13600:2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| I.S. EN ISO 21952:2012 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS-SHIELDED ARC WELDING OF CREEP-RESISTING STEEL - CLASSIFICATION (ISO 21952:2012) |
| I.S. EN ISO 18273:2015 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION (ISO 18273:2015) |
| I.S. EN 12166:2016 | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| DIN EN 13148:2010-12 | Copper and copper alloys - Hot-dip tinned strip |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| DIN EN 12450:2013-01 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| I.S. EN 1982:2017 | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
| DIN EN 12451:2012-08 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| IEC 60350-1:2016 RLV | Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance |
| I.S. EN 12421:2017 | MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM |
| DIN EN 1172:2012-02 | Copper and copper alloys - Sheet and strip for building purposes |
| I.S. EN 1520:2011 | PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT |
| I.S. EN 13599:2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| I.S. EN 12167:2016 | COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
| DIN EN 12420:1999-03 | COPPER AND COPPER ALLOYS - FORGINGS |
| I.S. EN 13605:2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| I.S. EN ISO 18274:2010 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID STRIP ELECTRODES, SOLID WIRES AND SOLID RODS FOR FUSION WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION |
| I.S. EN 1977:2013 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| I.S. EN 12452:2012 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| I.S. EN ISO 6976:2016 | NATURAL GAS - CALCULATION OF CALORIFIC VALUES, DENSITY, RELATIVE DENSITY AND WOBBE INDICES FROM COMPOSITION (ISO 6976:2016) |
| I.S. EN 12438:2017 | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| DIN EN 12452:2012-08 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| I.S. EN 1172:2011 | COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
| I.S. EN 12168:2016 | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| I.S. EN ISO 15791-1:2013 | PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014) |
| I.S. EN ISO 17634:2015 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 17634:2015) |
| I.S. EN ISO 1071:2015 | WELDING CONSUMABLES - COVERED ELECTRODES, WIRES, RODS AND TUBULAR CORED ELECTRODES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION (ISO 1071:2015) |
| I.S. EN 1559-1:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 1976:2012 | COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS |
| I.S. EN ISO 14172:2015 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION (ISO 14172:2015) |
| I.S. EN 13602:2013 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| I.S. EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| I.S. EN 13107:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
| I.S. EN 13604:2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| I.S. EN ISO 6848:2015 | ARC WELDING AND CUTTING - NONCONSUMABLE TUNGSTEN ELECTRODES - CLASSIFICATION (ISO 6848:2015) |
| EN 50229 : 2015 COR 2016 | ELECTRIC CLOTHES WASHER-DRYERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
| I.S. EN ISO 9906:2012 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| UNI EN ISO 717-1 : 2013 | ACOUSTICS - RATING OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION |
| I.S. EN 12451:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| I.S. EN ISO 717-1:2013 | ACOUSTICS - RATING OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION (ISO 717-1:2013) |
| I.S. EN ISO 21809-2:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS (ISO 21809-2:2014) |
| ONORM EN ISO 2560 : 2010 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| UNI EN ISO 2560 : 2010 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| DIN EN 1977:2013-04 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| EN ISO 11357-4:2014 | Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014) |
| I.S. EN 12165:2016 | COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
| I.S. EN 12164:2016 | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
| EN 60456:2016 | Clothes washing machines for household use - Methods for measuring the performance |
| I.S. EN 12420:2014 | COPPER AND COPPER ALLOYS - FORGINGS |
| I.S. EN ISO 717-2:2013 | ACOUSTICS - RATING OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION (ISO 717-2:2013) |
| UNI EN ISO 717-2 : 2013 | ACOUSTICS - RATING OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION |
| I.S. EN 764-2:2012 | PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS |
| I.S. EN ISO 14343:2017 | WELDING CONSUMABLES - WIRE ELECTRODES, STRIP ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION (ISO 14343:2017) |
| I.S. EN 12163:2016 | COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
| I.S. EN ISO 16834:2012 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 16834:2012) |
| DIN EN 764-2:2012-04 | Pressure equipment - Part 2: Quantities, symbols and units |
| UNI EN 14870-1 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| VDI/VDE 2649:2011-01 | Rotary tools for bolted connection - Guideline for comparative power-measurements of hydraulic impulse tools |
| VDI/VDE 2647:2013-02 | Type test of nutrunning tools - Torque and torque/angle checking |
| VDI/VDE 3699 Blatt 4:2014-01 | Process control using display screens - Curves |
| OVE/ONORM EN 60350-2 : 2015 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE (IEC 60350-2:2011, MODIFIED) |
| UNE-EN ISO 13349:2011 | Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
| ISO 19722:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption |
| CSA/ANSI NGV1 : 2017 | COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
| ECA ILAC P14 : 2013 | ILAC POLICY FOR UNCERTAINTY IN CALIBRATION |
| ISO 1100-2:2010 | Hydrometry Measurement of liquid flow in open channels Part 2: Determination of the stage-discharge relationship |
| 13/30246099 DC : 0 | BS ISO 17094 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIBACTERIAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT |
| 17/30337173 DC : 0 | BS EN 62884-4 - MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 4: SHORT-TERM FREQUENCY STABILITY TEST METHODS |
| ISO/IEC Guide 37:2012 | Instructions for use of products by consumers |
| BS EN 62595-1-1:2013 | LCD backlight unit Generic specification |
| CLC/TS 50594:2015 | Tumble dryers for commercial use - Methods for measuring the performance |
| PREN 60436 : DRAFT 2015 | ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - TEST METHODS FOR MEASURING THE PERFORMANCE (IEC 60436:2004, MODIFIED + A2:2012, MODIFIED + A1:2009, MODIFIED) |
| 13/30287806 DC : 0 | BS EN 60539-1 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION |
| BS ISO 13643-3:2017 | Ships and marine technology. Manoeuvring of ships Yaw stability and steering |
| BS EN ISO 19001:2013 | In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology |
| 16/30350802 DC : 0 | BS EN ISO 18275 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION |
| PD IEC/TS 62720:2017 | Identification of units of measurement for computer-based processing |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| 13/30285624 DC : 0 | BS EN ISO 16061 - INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| BS EN 61987-24-2:2017 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of properties (LOPs) of valve/actuator accessories for electronic data exchange |
| PD CLC/TS 50640:2015 | Clothes washing machines for commercial use. Methods for measuring the performance |
| ISO 18471:2015 | Agricultural irrigation equipment Filters Verification of filtration grade |
| 17/30318200 DC : 0 | BS ISO 28580 - TYRE ROLLING RESISTANCE MEASUREMENT METHOD - SINGLE POINT TEST AND MEASUREMENT RESULT CORRELATION - DESIGNED TO FACILITATE INTERNATIONAL COOPERATION AND, POSSIBLY, REGULATION BUILDING |
| BS EN ISO 18275:2012 | Welding consumables. Covered electrodes for manual metal arc welding of high-strength steels. Classification |
| 13/30280243 DC : 0 | BS ISO 5393 - ROTARY TOOLS FOR THREADED FASTENERS - PERFORMANCE TEST METHOD |
| 17/30335356 DC : DRAFT MAY 2017 | BS ISO 28641 - RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS |
| 14/30301974 DC : 0 | BS ISO 10203 - IRON ORES - DETERMINATION OF CALCIUM - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| 17/30351439 DC : 0 | BS EN ISO 26304 - WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| 13/30294749 DC : 0 | BS ISO 19973-2 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 2: DIRECTIONAL CONTROL VALVES |
| BS EN ISO 17777:2016 | Welding consumables. Covered electrodes for manual metal arc welding of copper and copper alloys. Classification |
| BS EN ISO 14629:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of flowability of ceramic powders |
| I.S. EN ISO 17769-1:2012 | LIQUID PUMPS AND INSTALLATION - GENERAL TERMS, DEFINITIONS, QUANTITIES, LETTER SYMBOLS AND UNITS - PART 1: LIQUID PUMPS (ISO 17769-1:2012) |
| UNI EN ISO 12153 : 2012 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION |
| DIN ISO 18352:2017-11 | CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT-ENERGY LEVEL (ISO 18352:2009) |
| 14/30287690 DC : 0 | BS EN ISO 18273 - WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION |
| 17/30356406 DC : 0 | BS EN 17116-2 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS |
| UNE-EN 61121:2013 | Tumble dryers for household use - Methods for measuring the performance |
| BS ISO 19973-3:2015 | Pneumatic fluid power. Assessment of component reliability by testing Cylinders with piston rod |
| ISO 18061:2014 | Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) — Determination of antiviral activity of semiconducting photocatalytic materials — Test method using bacteriophage Q-beta |
| 11/30219230 DC : 0 | BS ISO 13175-3 - IMPLANTS FOR SURGERY - CALCIUM PHOSPHATES - PART 3: HYDROXYAPATITE AND BETA-TRICALCIUM PHOSPHATE BONE SUBSTITUTES |
| BS EN ISO 3580:2017 | Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification |
| BS ISO 22197-4:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of formaldehyde |
| 11/30240450 DC : 0 | BS EN 13347 - COPPER AND COPPER ALLOYS - ROD AND WIRE FOR WELDING AND BRAZE WELDING |
| 13/30287675 DC : 0 | BS EN ISO 636 - WELDING CONSUMABLES - RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE-GRAIN STEELS - CLASSIFICATION |
| PREN 12421 : DRAFT 2015 | MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM |
| BS ISO 18071:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of antiviral activity of semiconducting photocatalytic materials under indoor lighting environment. Test method using bacteriophage Q-beta |
| ISO/TS 17518:2015 | Medical laboratories — Reagents for staining biological material — Guidance for users |
| BS EN ISO 6892-1:2016 | Metallic materials. Tensile testing Method of test at room temperature |
| UNI EN ISO 13349 : 2011 | FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES |
| 11/30216339 DC : 0 | BS ISO 8287 - MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM - CHEMICAL COMPOSITION |
| BS ISO 23145-2 : 2012 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 2: UNTAPPED DENSITY |
| 13/30275585 DC : 0 | BS EN 13107 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
| 13/30294746 DC : 0 | BS ISO 19973-1 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 1: GENERAL PROCEDURES |
| 17/30355897 DC : 0 | BS EN 60350-2:2017/AA - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
| ISO/IEC 14776-454:2018 | Information technology Small computer system interface (SCSI) Part 454: SCSI Primary Commands - 4 (SPC-4) |
| ISO 22201-2:2013 | Lifts (elevators), escalators and moving walks Programmable electronic systems in safety related applications Part 2: Escalators and moving walks (PESSRAE) |
| CEI EN 60440 : 2013 | METHOD OF MEASUREMENT OF NON-LINEARITY IN RESISTORS |
| 14/30287684 DC : 0 | BS EN ISO 6848 - ARC WELDING AND CUTTING - NONCONSUMABLE TUNGSTEN ELECTRODES - CLASSIFICATION |
| UNI EN ISO 25239-4 : 2012 | FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES |
| ISO 14174:2012 | Welding consumables — Fluxes for submerged arc welding and electroslag welding — Classification |
| BS ISO 18061:2014 | Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics). Determination of antiviral activity of semiconducting photocatalytic materials. Test method using bacteriophage Q-beta |
| BS ISO 13643-4:2017 | Ships and marine technology. Manoeuvring of ships Stopping, acceleration, traversing |
| IEC TS 62950:2017 | Household and similar electrical appliances - Specifying smart capabilities of appliances and devices - General aspects |
| BS ISO 11894-1:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics Oxide-ion-conducting solid electrolytes |
| ISO 17633:2017 | Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification |
| DIN EN 16481 E : 2014 | TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS |
| BS EN ISO 11357-4:2014 | Plastics. Differential scanning calorimetry (DSC) Determination of specific heat capacity |
| EN 61987-24-3:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange |
| ISO 3898:2013 | Bases for design of structures — Names and symbols of physical quantities and generic quantities |
| BS ISO 16249:2013 | Springs. Symbols |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| 17/30347911 DC : 0 | BS ISO 11929-3 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION - PART 3: APPLICATIONS TO UNFOLDING METHODS |
| API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| BS ISO 16525-2:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of electrical characteristics for use in electronic assemblies |
| BS ISO 19973-4:2014 | Pneumatic fluid power. Assessment of component reliability by testing Pressure regulators |
| 15/30271100 DC : 0 | BS ISO 16332 - DIESEL ENGINES - FUEL FILTERS - METHOD FOR EVALUATING FUEL/ WATER SEPARATION EFFICIENCY |
| DIN EN ISO 10628-1:2015-04 | DIAGRAMS FOR THE CHEMICAL AND PETROCHEMICAL INDUSTRY - PART 1: SPECIFICATION OF DIAGRAMS (ISO 10628-1:2014) |
| 17/30356073 DC : 0 | BS ISO 19101-2 - GEOGRAPHIC INFORMATION - REFERENCE MODEL - PART 2: IMAGERY |
| CSA ISO 50002 : 2015 | ENERGY AUDITS - REQUIREMENTS WITH GUIDANCE FOR USE |
| ISO 9277:2010 | Determination of the specific surface area of solids by gas adsorption — BET method |
| INCITS/ISO/IEC 11179-3 : 2014 | INFORMATION TECHNOLOGY - METADATA REGISTRIES (MDR) - PART 3: REGISTRY METAMODEL AND BASIC ATTRIBUTES |
| 15/30279085 DC : 0 | BS ISO 18531 - IMPLANTS FOR SURGERY - CALCIUM PHOSPHATE BIOCERAMICS - CHARACTERIZATION OF HARDENING BONE PASTE MATERIALS |
| UNE-EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
| BS ISO 4000-1:2015 | Passenger car tyres and rims Tyres (metric series) |
| PREN 12451 : DRAFT 2010 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| 13/30287687 DC : 0 | BS EN ISO 14172 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION |
| ANSI INCITS 501 : 2016 | INFORMATION TECHNOLOGY - SECURITY FEATURES FOR SCSI COMMANDS (SFSC) |
| BS EN 60793-1-1:2017 | Optical fibres Measurement methods and test procedures. General and guidance |
| CEI EN 62884-1 : 1ED 2018 | MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT |
| UNE-EN ISO 14171:2016 | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016) |
| 11/30240456 DC : 0 | BS EN 13601 - COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| ISO 16842:2014 | Metallic materials Sheet and strip Biaxial tensile testing method using a cruciform test piece |
| BS EN 62884-2:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Phase jitter measurement method |
| BS EN ISO 80000-9 : 2013 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
| ISO 6892-2:2018 | Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature |
| I.S. EN ISO 80000-2:2013 | QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY (ISO 80000-2:2009) |
| BS EN ISO 6892-2:2011 | Metallic materials. Tensile testing Method of test at elevated temperature |
| I.S. EN ISO 19001:2013 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY (ISO 19001:2013) |
| NF EN ISO 27509 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
| IEC PAS 63124:2017 | Tumble dryers for commercial use - Methods for measuring the performance |
| CSA B108 : 2014 | COMPRESSED NATURAL GAS FUELLING STATIONS INSTALLATION CODE |
| I.S. EN 60679-1:2017 | PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| I.S. EN ISO 80000-5:2013 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000- 5:2007) |
| I.S. EN 140401-804:2011 | DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25 |
| DIN EN ISO 14171:2015-08 (Draft) | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE/FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION (ISO 14171:2016) |
| I.S. EN 60939-3:2015 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE |
| ISO/IEC 11179-3:2013 | Information technology — Metadata registries (MDR) — Part 3: Registry metamodel and basic attributes |
| I.S. EN IEC 63041-2:2018 | PIEZOELECTRIC SENSORS - PART 2: CHEMICAL AND BIOCHEMICAL SENSORS |
| NF EN ISO 13123 : 2012 | METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT |
| BS EN 61591 : 1997 | HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE |
| ISO 6162-2:2018 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| IEC 63041-1:2017 | Piezoelectric sensors - Part 1: Generic specifications |
| I.S. EN 62714-1:2014 | ENGINEERING DATA EXCHANGE FORMAT FOR USE IN INDUSTRIAL AUTOMATION SYSTEMS ENGINEERING - PART 1: ARCHITECTURE AND GENERAL REQUIREMENTS |
| I.S. EN ISO 6892-2:2011 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| S.R. CLC/TS 50640:2015 | CLOTHES WASHING MACHINES FOR COMMERCIAL USE - METHODS FOR MEASURING THE PERFORMANCE |
| UNI CEI ISO 80000-10 : 2010 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| I.S. EN ISO 19288:2016 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID WIRES AND RODS FOR FUSION WELDING OF MAGNESIUM AND MAGNESIUM ALLOYS CLASSIFICATION (ISO 19288:2016) |
| ISO 19652:2018 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for complete decomposition performance of semiconducting photocatalytic materials under indoor lighting environment — Decomposition of acetaldehyde |
| I.S. EN 16481:2014 | TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS |
| I.S. EN 61786-1:2014 | MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS |
| UNE-EN ISO 636:2017 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017) |
| UNE-EN ISO 544:2011 | Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2011) |
| NASA KSC DF 107 : 2017 | TECHNICAL DOCUMENTATION STYLE GUIDE |
| UNI EN ISO 21809-1 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
| ISO 19973-4:2014 | Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators |
| I.S. EN ISO 11357-4:2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014) |
| BS EN 140401-804 : 2011 | DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25 |
| CSA/ANSI HGV 3.1 : 2015 | FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES |
| BS EN ISO 13349:2010 | Fans — Vocabulary and definitions of categories (ISO 13349:2010) |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| UNE-EN ISO 17672:2017 | Brazing - Filler metals (ISO 17672:2016) |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| PD IEC/TR 60601-4-3:2015 | Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements |
| PREN 12420 : DRAFT 2012 | COPPER AND COPPER ALLOYS - FORGINGS |
| UNE-EN 60705:2015 | Household microwave ovens - Methods for measuring performance |
| API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| I.S. EN 62884-1:2017 | MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT |
| IEC TS 62720:2017 | Identification of units of measurement for computer-based processing |
| ISO 13643-1:2017 | Ships and marine technology — Manoeuvring of ships — Part 1: General concepts, quantities and test conditions |
| ISO 9928-2:2014 | Cranes Crane operating manual Part 2: Mobile cranes |
| EN ISO 80601-2-55:2018 | Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2018) |
| ISO 13643-2:2017 | Ships and marine technology — Manoeuvring of ships — Part 2: Turning and yaw checking |
| ISO 20808:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method |
| ISO 13584-32:2010 | Industrial automation systems and integration — Parts library — Part 32: Implementation resources: OntoML: Product ontology markup language |
| EN ISO 24598:2012 | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2012) |
| ISO 11891:2012 | Hot formed helical compression springs — Technical specifications |
| ISO 80601-2-55:2018 | Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors |
| ISO 544:2017 | Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings |
| IEC 60255-24:2013 | Measuring relays and protection equipment - Part 24: Common format for transient data exchange (COMTRADE) for power systems |
| ISO 10204:2017 | Iron ores — Determination of magnesium — Flame atomic absorption spectrometric method |
| IEC 62679-1-1:2014 | Electronic paper displays - Part 1-1: Terminology |
| EN 12420:2014 | Copper and copper alloys - Forgings |
| ISO 8287:2011 | Magnesium and magnesium alloys Unalloyed magnesium Chemical composition |
| EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
| I.S. EN 60115-1:2011 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED) |
| IEC 60679-1:2017 | Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
| DIN EN ISO 17634:2015-12 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 17634:2015) |
| DIN EN ISO 1628-1:2012-10 | Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles (ISO 1628-1:2009 + Amd 1:2012); German version EN ISO 1628-1:2009 + A1:2012 |
| DIN EN 1976:2013-01 | COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS |
| DIN EN 12420:2014-09 | Copper and copper alloys - Forgings |
| DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
| DIN EN ISO 2560:2010-03 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
| DIN EN ISO 18273:2016-05 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION (ISO 18273:2015) |
| DIN EN ISO 18274:2011-04 | Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010) |
| DIN EN 12166:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| ISO 14629:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of flowability of ceramic powders |
| ISO 13123:2011 | Metallic and other inorganic coatings — Test method of cyclic heating for thermal-barrier coatings under temperature gradient |
| BS EN 12168:1998 | Copper and copper alloys. Hollow rod for free machining purposes |
| BS EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| ISO 17777:2016 | Welding consumables Covered electrodes for manual metal arc welding of copper and copper alloys Classification |
| BS EN ISO 21809-2:2014 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy coatings |
| BS EN ISO 9906:2012 | Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3 |
| UNE-EN 60825-1:2015 | Safety of laser products - Part 1: Equipment classification and requirements |
| DIN EN ISO 9906:2013-03 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| BS EN 12438:2017 | Magnesium and magnesium alloys. Magnesium alloys for cast anodes |
| UNE-EN 1982:2018 | Copper and copper alloys - Ingots and castings |
| UNE-EN 12438:2018 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| IEC 62575-1:2015 | Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification |
| UNE-EN 12450:2013 | Copper and copper alloys - Seamless, round copper capillary tubes |
| I.S. EN ISO 2560:2009 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| I.S. EN 60825-1:2014 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS |
| I.S. EN ISO 24034:2010 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID WIRES AND RODS FOR FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS - CLASSIFICATION |
| UNE-EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| ONORM EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 24034:2010 | Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2010) |
| UNI EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| EN 140401-804:2011/A1:2013 | DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25 |
| EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
| EN ISO 14341:2011 | Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010) |
| EN ISO 25239-4:2011 | Friction stir welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 25239-4:2011) |
| EN ISO 15791-1:2013 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| EN ISO 6848:2015 | Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015) |
| EN ISO 21809-2:2014 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014) |
| UNI EN 1976 : 2012 | COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS |
| UNI EN 1172 : 2012 | COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
| UNI EN ISO 15791-1 : 2014 | PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE |
| UNI EN 13599 : 2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| UNI EN 12451 : 2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| UNI EN ISO 9906 : 2012 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 |
| UNI EN 12420 : 2014 | COPPER AND COPPER ALLOYS - FORGINGS |
| UNI EN ISO 13686 : 2013 | NATURAL GAS - QUALITY DESIGNATION |
| UNI EN 1520 : 2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement |
| UNI EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| UNI EN ISO 28781 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| UNI EN 14700 : 2014 | WELDING CONSUMABLES - WELDING CONSUMABLES FOR HARD-FACING |
| UNI EN 12450 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| UNI EN ISO 16834 : 2012 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| EN 14870-1:2011 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) |
| UNI EN ISO 18274 : 2011 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID STRIP ELECTRODES, SOLID WIRES AND SOLID RODS FOR FUSION WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION |
| UNI EN 12452 : 2012 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| UNI EN 1977 : 2013 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| UNI EN 13602 : 2013 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| CSA C22.2 No. 60079.1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| UNI EN 764-2 : 2012 | PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS |
| UNI EN 13148 : 2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| UNI EN 13604 : 2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| BS ISO 7503-3:2016 | Measurement of radioactivity. Measurement and evaluation of surface contamination Apparatus calibration |
| BS EN ISO 23145-2:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders Untapped density |
| 17/30363142 DC : 0 | BS EN 61591 ED.2.0 - COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE |
| BIS IS/ISO 80000-5 : 2007 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
| 13/30272270 DC : 0 | BS ISO 17411 - OPTICS AND PHOTONICS - OPTICAL MATERIALS AND COMPONENTS - TEST METHOD FOR HOMOGENEITY OF OPTICAL GLASSES BY LASER INTERFEROMETRY |
| BS EN 16481:2014 | Timber stairs. Structural design. Calculation methods |
| DIN EN ISO 11357-4:2014-10 | Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014) |
| 13/30294752 DC : 0 | BS ISO 19973-3 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 3: CYLINDERS WITH PISTON ROD |
| UNI EN ISO 17769-2 : 2012 | LIQUID PUMPS AND INSTALLATION - GENERAL TERMS, DEFINITIONS, QUANTITIES, LETTER SYMBOLS AND UNITS - PART 2: PUMPING SYSTEM |
| BS ISO 3600:2015 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Operator’s manuals. Content and format |
| ISO 13643-3:2017 | Ships and marine technology — Manoeuvring of ships — Part 3: Yaw stability and steering |
| 11/30199652 DC : 0 | BS ISO 22197-4 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 4: REMOVAL OF FORMALDEHYDE |
| BS ISO 14188:2012 | Metallic and other inorganic coatings. Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings |
| ISO 24213:2017 | Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending |
| DIN EN ISO 6892-3:2015-07 | METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015) |
| 11/30239968 DC : 0 | BS EN 16245-1 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 1: GENERAL REQUIREMENTS |
| 11/30240465 DC : 0 | BS EN 13604 - COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| ISO 12641-1:2016 | Graphic technology Prepress digital data exchange Colour targets for input scanner calibration Part 1: Colour targets for input scanner calibration |
| UNI CEI EN ISO 80000-2 : 2013 | QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY |
| 10/30198921 DC : 0 | BS ISO 11891 - HOT FORMED HELICAL COMPRESSION SPRINGS - TECHNICAL SPECIFICATIONS |
| BS EN 60115-8:2012 | Fixed resistors for use in electronic equipment Sectional specification. Fixed surface mount resistors |
| ISO 16038:2017 | Male condoms — Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
| UNE-EN ISO 80000-9:2014 | Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009 + Amd 1:2011) |
| 16/30348139 DC : 0 | BS EN ISO 80000-4 - QUANTITIES AND UNITS - PART 4: MECHANICS |
| 14/30292935 DC : 0 | BS ISO 4000-1 - PASSENGER CAR TYRES AND RIMS - PART 1: TYRES (METRIC SERIES) |
| BS EN ISO 13123:2011 | Metallic and other inorganic Coatings. Test method of cyclic heating for thermal barrier coatings under temperature gradient |
| 11/30240468 DC : 0 | BS EN 13605 - COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| CSA B109 : 2017 | NATURAL GAS FOR VEHICLES INSTALLATION CODE |
| I.S. EN ISO 21809-1:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
| 16/30340174 DC : 0 | BS ISO 16220 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
| 10/30237986 DC : 0 | BS EN 140401-804 - DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25 |
| BS ISO 22400-1:2014 | Automation systems and integration. Key performance indicators (KPIs) for manufacturing operations management Overview, concepts and terminology |
| 14/30280850 DC : 0 | BS EN 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| 06/30126364 DC : 0 | IEC 80000-14 - QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| DIN 1338:2011-03 | Writing and typesetting of formulae |
| UNE-EN ISO 11357-4:2014 | Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014) |
| 16/30278559 DC : 0 | BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS |
| ISO 18762:2016 | Tubes of titanium and titanium alloys Welded tubes for condensers and heat exchangers Technical delivery conditions |
| 12/30230676 DC : 0 | BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES |
| ISO 24155:2016 | Hydrometry Hydrometric data transmission systems Specification of system requirements |
| I.S. EN 62884-2:2017 | MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 2: PHASE JITTER MEASUREMENT METHOD |
| I.S. EN ISO 18275:2012 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION (ISO 18275:2011) |
| BS EN 16245-1:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics General requirements |
| AWS A5.5/A5.5M : 2014 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| EN ISO 544:2017 | Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2017) |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| 13/30283636 DC : 0 | BS ISO 13179-1 - IMPLANTS FOR SURGERY - PLASMA-SPRAYED UNALLOYED TITANIUM COATINGS ON SURGICAL IMPLANTS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 12153:2012 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION (ISO 12153:2011) |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| CEI EN 60079-35-2 : 2013 | EXPLOSIVE ATMOSPHERES - PART 35-2: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PERFORMANCE AND OTHER SAFETY-RELATED MATTERS |
| NF EN ISO 21809-3 : 2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| BS IEC 62715-1-1:2013 | Flexible display devices Terminology and letter symbols |
| 12/30218281 DC : 0 | BS ISO 80003-3 - PHYSIOLOGICAL QUANTITIES AND THEIR UNITS - PART 3: CHEMISTRY |
| BS ISO 28704:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for cyclic bending fatigue of porous ceramics at room temperature |
| BS ISO 19635:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antialgal activity of semiconducting photocatalytic materials |
| 14/30313073 DC : 0 | BS EN 61591:1997 +A12 - HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE |
| BS ISO 15241:2012 | Rolling bearings. Symbols for physical quantities |
| BS EN ISO 14171:2010 | Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification |
| DIN ISO 13643-1:2015-10 | SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 1: GENERAL CONCEPTS, QUANTITIES AND TEST CONDITIONS (ISO 13643-1:2013) |
| 13/30287693 DC : 0 | BS EN ISO 17632 - WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| 17/30302770 DC : 0 | BS ISO 13779-3 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 3: CHEMICAL ANALYSIS AND CHARACTERIZATION OF CRYSTALLINITY RATIO AND PHASE PURITY |
| BS ISO 16220:2017 | Magnesium and magnesium alloys. Magnesium alloy ingots and castings |
| ONORM EN ISO 1628-1 : 2012 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009 + AMD 1:2012) |
| BS ISO 16038:2017 | Male condoms. Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
| DIN EN ISO 17672:2015-04 (Draft) | BRAZING - FILLER METALS (ISO 17672:2016) |
| 16/30343195 DC : 0 | BS ISO 13643-3 - SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 3: YAW STABILITY AND STEERING |
| 15/30296836 DC : 0 | BS ISO 18071 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF ANTIVIRAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - TEST METHOD USING BACTERIOPHAGE Q-BETA |
| BS ISO 9277:2010 | Determination of the specific surface area of solids by gas adsorption. BET method |
| 10/30233141 DC : 0 | BS EN ISO 16834 - WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS-SHIELDED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| 12/30246885 DC : 0 | BS ISO 16842 - METALLIC MATERIALS - SHEET AND STRIP - BIAXIAL TENSILE TESTING METHOD USING CRUCIFORM SPECIMEN |
| 11/30250542 DC : 0 | BS EN ISO 12153 - WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION |
| EN 60350-1:2016 | Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring Performance |
| 11/30240453 DC : 0 | BS EN 13600 - COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| PREN 13604 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| DIN 1301-1:2010-10 | Units - Part 1: Unit names, unit symbols |
| BS ISO 20808:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method |
| BS ISO 9928-1:2015 | Cranes. Crane operating manual General |
| 16/30323238 DC : 0 | BS EN ISO 17633 - WELDING CONSUMABLES - TUBULAR CORED ELECTRODES AND RODS FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
| BS ISO 80000-2 : 2009 | QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY |
| BS ISO 24213:2017 | Metallic materials. Sheet and strip. Method for springback evaluation in stretch bending |
| 10/30229550 DC : 0 | BS EN 12451 REV - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| AWS A5.10/A5.10M : 2012 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINUM AND ALUMINUM-ALLOYS - CLASSIFICATION |
| BS EN ISO 17769-1:2012 | Liquid pumps and installation. General terms, definitions, quantities, letter symbols and units Liquid pumps |
| BS ISO 6162-1:2012 | Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| I.S. EN 60079-35-2:2012 | EXPLOSIVE ATMOSPHERES - PART 35-2: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PERFORMANCE AND OTHER SAFETY-RELATED MATTERS (IEC 60079-35-2:2011 (EQV)) |
| BS EN ISO 17769-2:2012 | Liquid pumps and installation. General terms, definitions, quantities, letter symbols and units Pumping System |
| IEEE/ASTM SI 10-2016 | American National Standard for Metric Practice |
| 17/30347905 DC : 0 | BS ISO 11929-1 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION - PART 1: ELEMENTARY APPLICATIONS |
| ISO 11943:1999 | Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation |
| UNI EN ISO 11357-4 : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY |
| BS EN 50229:2015 | Electric clothes washer-dryers for household use. Methods of measuring the performance |
| BS ISO 16792:2006 | Technical product documentation. Digital product definition data practices |
| UNI ISO 7301 : 2013 | RICE - SPECIFICATION |
| 16/30343192 DC : 0 | BS ISO 13643-2 - SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 2: TURNING AND YAW CHECKING |
| UNI EN ISO 14341 : 2011 | WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| ISO 17841:2015 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for thermal fatigue of fine ceramics substrate |
| DIN EN ISO 13123:2012-04 | Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011) |
| ISO 16792:2015 | Technical product documentation Digital product definition data practices |
| BS ISO 17841:2015 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal fatigue of fine ceramics substrate |
| UNI CEI EN ISO 80000-5 : 2013 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
| ISO/TR 13014:2012 | Nanotechnologies Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| UNI CEI EN ISO 80000-10 : 2013 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| UNI EN ISO 3690 : 2012 | WELDING AND ALLIED PROCESSES - DETERMINATION OF HYDROGEN CONTENT IN ARC WELD METAL |
| I.S. EN ISO 17632:2015 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION (ISO 17632:2015) |
| I.S. EN ISO 24598:2012 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 24598:2012) |
| UNI EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| UNE-EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
| UNI EN ISO 27509 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
| I.S. EN ISO 80000-10:2013 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
| I.S. EN ISO 6892-1:2016 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| I.S. EN 60350-1:2016 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 1: RANGES, OVENS, STEAM OVENS AND GRILLS - METHODS FOR MEASURING PERFORMANCE |
| I.S. EN ISO 6892-3:2015 | METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015) |
| I.S. EN ISO 25239-4:2011 | FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES (ISO 25239-4:2011) |
| EN 60679-1:2017 | Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification |
| ISO/TS 17536-2:2017 | Road vehicles — Aerosol separator performance test for internal combustion engines — Part 2: Laboratory test method |
| DIN EN ISO 80000-5:2016-02 (Draft) | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000-5:2007) |
| ONORM EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| I.S. EN ISO 23145-2:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 2: UNTAPPED DENSITY (ISO 23145-2:2012) |
| ISO 16249:2013 | Springs — Symbols |
| I.S. EN ISO 26304:2018 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 26304:2017) |
| ISO 19973-3:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 3: Cylinders with piston rod |
| EN 61987-24-2:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange |
| I.S. EN 50242:2016 | ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| ISO 7301:2011 | Rice Specification |
| CSA 12.3 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| ISO 5011:2014 | Inlet air cleaning equipment for internal combustion engines and compressors Performance testing |
| DIN EN ISO 80000-10:2016-09 (Draft) | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
| BS ISO 5393:2017 | Rotary tools for threaded fasteners. Performance test method |
| BS EN 61121:2013 | Tumble dryers for household use. Methods for measuring the performance |
| ISO 20032:2013 | Method for evaluation of tensile properties of metallic superplastic materials |
| UNE-EN ISO 24598:2013 | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2012) |
| ISO 2597-2:2015 | Iron ores Determination of total iron content Part 2: Titrimetric methods after titanium(III) chloride reduction |
| BS ISO 22197-2:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of acetaldehyde |
| I.S. EN ISO 14629:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FLOWABILITY OF CERAMIC POWDERS (ISO 14629:2012) |
| PREN 12449 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| EN IEC 63041-2:2018 | Piezoelectric Sensors - Part 2: Chemical and Biochemical Sensors |
| EN 60384-1:2016 | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| SAE J3049_201508 | Model Architecture and Interfaces Recommended Practice for Ground Vehicle System and Subsystem Dynamical Simulation |
| EN ISO 21809-5:2017 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| ISO 12490:2011 | Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| EN ISO 26304:2018 | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017) |
| EN ISO 18275:2012 | Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2011) |
| EN ISO 3690:2012 | Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2012) |
| ISO 11894-1:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes |
| ISO/TS 13499:2014 | Road vehicles Multimedia data exchange format for impact tests |
| EN 12861:2018 | Copper and copper alloys - Scrap |
| ISO 19973-2:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 2: Directional control valves |
| ISO 19973-5:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves |
| ISO 14610:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of porous ceramics at room temperature |
| IEC 61747-1-2:2014 | Liquid crystal display devices - Part 1-2: Generic - Terminology and letter symbols |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 22400-1:2014 | Automation systems and integration — Key performance indicators (KPIs) for manufacturing operations management — Part 1: Overview, concepts and terminology |
| I.S. EN 62391-1:2016 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| ISO 22197-1:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 1: Removal of nitric oxide |
| I.S. EN 12861:1999 | COPPER AND COPPER ALLOYS - SCRAP |
| ISO 10203:2017 | Iron ores Determination of calcium Flame atomic absorption spectrometric method |
| IEC 61987-24-3:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange |
| IEC 60350-1:2016 | Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance |
| I.S. EN ISO 16061:2015 | INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 16061:2015) |
| UNE-EN ISO 21809-1:2019 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018) |
| EN 60539-1:2016/AC:2017-09 | DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016/COR1:2017) |
| EN 60115-1:2011/A11:2015 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| DIN EN ISO 21952:2012-08 | Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012) |
| DIN EN ISO 18276:2016-02 (Draft) | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS-SHIELDED AND NON-GAS-SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 18276:2017) |
| DIN EN ISO 14172:2016-02 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015) |
| DIN EN ISO 13686:2013-12 | Natural gas - Quality designation (ISO 13686:2013); German version EN ISO 13686:2013 |
| BS EN 13605:2013 | Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
| UNE-EN 1172:2012 | Copper and copper alloys - Sheet and strip for building purposes |
| ISO 13349:2010 | Fans — Vocabulary and definitions of categories |
| BS EN 12165:2011 | Copper and copper alloys. Wrought and unwrought forging stock |
| BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| UNE-EN ISO 6892-1:2017 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| ISO 13680:2010 | Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| BS EN 1982:2017 | Copper and copper alloys. Ingots and castings |
| ISO 14171:2016 | Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification |
| ISO 1071:2015 | Welding consumables Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron Classification |
| UNE-EN 13602:2014 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| ISO 9906:2012 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
| IEC 62595-1-1:2013 | LCD backlight unit - Part 1-1: Generic specification |
| EN 60436 : 2016 | ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE (IEC 60436:2004, MODIFIED + A1:2009, MODIFIED + A2:2012, MODIFIED) |
| ISO 14341:2010 | Welding consumables Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification |
| ISO 18273:2015 | Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 21809-2:2014 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings |
| ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants General requirements |
| BS EN 13107:2015 | Safety requirements for cableway installations designed to carry persons. Civil engineering works |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| BS EN ISO 16834:2012 | Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels. Classification |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| IEC 61400-25-2:2015 | Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models |
| IEC 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
| ISO 17769-1:2012 | Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1: Liquid pumps |
| IEC 60705:2010+AMD1:2014 CSV | Household microwave ovens - Methods for measuring performance |
| UNE-EN 12452:2013 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| UNE-EN 13601:2014 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| BS EN 12451:2012 | Copper and copper alloys. Seamless, round tubes for heat exchangers |
| UNE-EN 60456:2016 | Clothes washing machines for household use - Methods for measuring the performance |
| UNE-EN ISO 26304:2012 | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2011) |
| ISO 19001:2013 | In vitro diagnostic medical devices — Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology |
| UNE-EN 13148:2012 | Copper and copper alloys - Hot-dip tinned strip |
| IEC 60384-1:2016 | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| UNE-EN ISO 18273:2016 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2015) |
| ISO 19288:2016 | Welding consumables Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys Classification |
| UNE-EN 12451:2013 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| ISO 18274:2010 | Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification |
| UNE-EN ISO 17634:2015 | Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015) |
| UNE-EN 14700:2014 | Welding consumables - Welding consumables for hard-facing |
| ISO 21542:2011 | Building construction Accessibility and usability of the built environment |
| UNE-EN ISO 14172:2015 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015) |
| UNE-EN ISO 15791-1:2014 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| ISO 17634:2015 | Welding consumables Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels Classification |
| BS EN 12167:2011 | Copper and copper alloys. Profiles and bars for general purposes |
| UNE-EN ISO 18274:2011 | Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010) |
| IEC 80000-14:2008 | Quantities and units - Part 14: Telebiometrics related to human physiology |
| ISO 16834:2012 | Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification |
| ISO 17632:2015 | Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification |
| ISO 18276:2017 | Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification |
| ISO 12153:2011 | Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys — Classification |
| UNE-ISO 21542:2012 | Building construction. Accessibility and usability of the built environment. |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| BS EN ISO 1628-1 : 2009 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009) |
| ISO 14343:2017 | Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| ISO 80000-2:2009 | Quantities and units Part 2: Mathematical signs and symbols to be used in the natural sciences and technology |
| ISO 80000-10:2009 | Quantities and units Part 10: Atomic and nuclear physics |
| ISO 1628-1:2009 | Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles |
| BS EN 764-2:2012 | Pressure equipment Quantities, symbols and units |
| BS EN ISO 14172:2015 | Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification |
| UNE-EN 13600:2014 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| BS EN ISO 717-1:2013 | Acoustics. Rating of sound insulation in buildings and of building elements |
| BS EN ISO 17634:2015 | Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels. Classification |
| IEC 61786-1:2013 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
| UNE-EN 12420:2015 | Copper and copper alloys - Forgings |
| BS EN 13599:2014 | Copper and copper alloys. Copper plate, sheet and strip for electrical purposes |
| BS EN 13601:2013 | Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
| ISO 636:2017 | Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification |
| BS EN 12452:2012 | Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers |
| UNE-EN ISO 24034:2011 | Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO/FDIS 24034:2010) |
| ISO 25239-4:2011 | Friction stir welding Aluminium Part 4: Specification and qualification of welding procedures |
| BS EN ISO 18276:2017 | Welding consumables. Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels. Classification |
| BS EN 12166:2011 | Copper and copper alloys. Wire for general purposes |
| UNE-EN 12421:2017 | Magnesium and magnesium alloys - Unalloyed magnesium |
| BS EN 13602:2013 | Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors |
| BS EN 12164:2011 | Copper and copper alloys. Rod for free machining purposes |
| ISO 14172:2015 | Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification |
| ISO 80000-9:2009 | Quantities and units Part 9: Physical chemistry and molecular physics |
| UNE-EN ISO 18276:2017 | Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017) |
| ISO 3580:2017 | Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification |
| BS EN ISO 18274:2010 | Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification |
| BS EN 13604:2013 | Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| ISO 15791-1:2014 | Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance |
| BS EN 14870-1:2011 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends |
| ISO 2560:2009 | Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
| ISO 11357-4:2014 | Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity |
| ISO 17672:2016 | Brazing — Filler metals |
| EN 62595-1-1:2013 | LCD backlight unit - Part 1-1: Generic specification |
| EN ISO 13686:2013 | Natural gas - Quality designation (ISO 13686:2013) |
| EN ISO 18274:2010 | Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010) |
| EN ISO 80000-10:2013 | Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
| EN ISO 23145-2:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012) |
| EN ISO 17632:2015 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015) |
| EN 16481:2014 | Timber stairs - Structural design - Calculation methods |
| EN ISO 10628-1:2015 | Diagrams for the chemical and petrochemical industry - Part 1: Specification of diagrams (ISO 10628-1:2014) |
| EN 13599:2014 | Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
| EN ISO 80000-2:2013 | Quantities and units - Part 2: Mathematical signs and symbols to be used in the natural sciences and technology (ISO 80000-2:2009) |
| EN ISO 3580:2017 | Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017) |
| EN ISO 80000-9:2013 | Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009 + Amd 1:2011) |
| EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
| EN ISO 14629:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders (ISO 14629:2012) |
| EN ISO 17777:2016 | Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification (ISO 17777:2016) |
| EN 13604:2013 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| EN ISO 19288:2016 | Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification (ISO 19288:2016) |
| EN ISO 13123:2011 | Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011) |
| EN ISO 12153:2012 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2011) |
| EN ISO 80000-5:2013 | Quantities and units - Part 5: Thermodynamics (ISO 80000-5:2007) |
| EN ISO 6892-3:2015 | Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015) |
| EN ISO 636:2017 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017) |
| EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| EN 4500-001:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules |
| EN 1977:2013 | Copper and copper alloys - Copper drawing stock (wire rod) |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN ISO 9906:2012 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012) |
| EN 1976:2012 | Copper and copper alloys - Cast unwrought copper products |
| EN 13602:2013 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| EN ISO 18273:2015 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2015) |
| EN ISO 14172:2015 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015) |
| EN ISO 17769-2:2012 | Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 2: Pumping System (ISO 17769-2:2012) |
| EN ISO 1071:2015 | Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015) |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| EN ISO 13349:2010 | Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
| EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
| EN 14700:2014 | Welding consumables - Welding consumables for hard-facing |
| EN 16245-1:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements |
| EN ISO 14171:2016 | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016) |
| BIS IS/ISO 80000-2 : 2009 | QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY |
| DIN ISO 13643-4:2015-10 | SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 4: STOPPING, ACCELERATION, TRAVERSING (ISO 13643-4:2013) |
| BS EN 60440:2012 | Method of measurement of non-linearity in resistors |
| BS EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants. General requirements |
| UNE-EN 80000-14:2011 | Quantities and units - Part 14: Telebiometrics related to human physiology |
| ISO 18535:2016 | Diamond-like carbon films Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method |
| CEI EN 62595-1-1 : 2014 | LCD BACKLIGHT UNIT - PART 1-1: GENERIC SPECIFICATION |
| 12/30244863 DC : 0 | BS ISO 404 - STEEL AND STEEL PRODUCTS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
| 16/30343594 DC : 0 | BS EN ISO 80000-10 - QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| 17/30356403 DC : 0 | BS EN 17116-3 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 3: CONTINUOUS TUNNEL WASHER |
| DIN 28000-2:2011-01 | Chemical apparatus - Documentation in the life cycle of process plants - Part 2: Contents of documentation |
| PREN 13347 : DRAFT 2011 | COPPER AND COPPER ALLOYS - ROD AND WIRE FOR WELDING AND BRAZE WELDING |
| 15/30274135 DC : 0 | BS ISO 18405 - UNDERWATER ACOUSTICS - TERMINOLOGY |
| 15/30293091 DC : 0 | BS EN ISO 19288 - WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID WIRES AND RODS FOR FUSION WELDING OF MAGNESIUM AND MAGNESIUM ALLOYS - CLASSIFICATION |
| BS ISO/IEC 11179-3:2013 | Information technology. Metadata registries (MDR) Registry metamodel and basic attributes |
| UNE-EN ISO 19001:2013 | In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology (ISO 19001:2013) |
| BS EN ISO 28781:2010 | Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
| 11/30212259 DC : 0 | BS ISO 14610 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FLEXURAL STRENGTH OF POROUS CERAMICS AT ROOM TEMPERATURE |
| ISO 27327-2:2014 | Fans — Air curtain units — Part 2: Laboratory methods of testing for sound power |
| BS EN ISO 10628-1:2015 | Diagrams for the chemical and petrochemical industry Specification of diagrams |
| UNI EN ISO 21809-2 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS |
| 15/30284779 DC : 0 | BS EN ISO 17672 - BRAZING - FILLER METALS |
| 14/30301977 DC : 0 | BS ISO 10204 - IRON ORES - DETERMINATION OF MAGNESIUM - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| EN ISO 11960:2014 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014) |
| UNE-EN ISO 6892-3:2015 | Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015) |
| NF ISO 28641 : 2010 | RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS |
| CSA ISO/IEC 11179-3 : 2015 | INFORMATION TECHNOLOGY - METADATA REGISTRIES (MDR) - PART 3: REGISTRY METAMODEL AND BASIC ATTRIBUTES |
| 11/30199655 DC : 0 | BS ISO 22197-5 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 5: REMOVAL OF METHYL MERCAPTAN |
| BS ISO 18471:2015 | Agricultural irrigation equipment. Filters. Verification of filtration grade |
| UNI EN ISO 21952 : 2012 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION |
| BS ISO 80000-10 : 2009 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| 17/30358601 DC : 0 | BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
| ISO 20378:2017 | Welding consumables — Rods for gas welding of non-alloy and creep-resisting steels — Classification |
| BS EN 60350-2 : 2013 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - HOBS - METHODS FOR MEASURING PERFORMANCE |
| BS ISO 16525-3:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of heat-transfer properties |
| CEI EN 60115-8 : 2013 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS |
| API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| UNE-EN ISO 80000-2:2013 | Quantities and units - Part 2: Mathematical signs and symbols to be used in the natural sciences and technology (ISO 80000-2:2009) |
| CEI EN 50242-60436 : 2009 | ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| BS ISO 12490:2011 | Petroleum and natural gas industries. Mechanical integrity and sizing of actuators and mounting kits for pipeline valves |
| 04/30058025 DC : DRAFT MAR 2004 | ISO 80000-4 - QUANTITIES AND UNITS - PART 4: MECHANICS |
| 11/30240459 DC : 0 | BS EN 13602 - COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| PD ISO/TR 13519:2012 | Guidance on the development and use of ISO statistical publications supported by software |
| BS ISO 11891:2012 | Hot formed helical compression springs. Technical specifications |
| 14/30287678 DC : 0 | BS EN ISO 1071 - WELDING CONSUMABLES - COVERED ELECTRODES, WIRES, RODS AND TUBULAR CORED ELECTRODES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION |
| BS ISO 7301:2011 | Rice. Specification |
| 13/30262073 DC : 0 | BS ISO 18061 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF ANTIVIRAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - TEST METHOD USING BACTERIOPHAGE Q-BETA |
| 17/30300673 DC : 0 | BS ISO 19652 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPLETE DECOMPOSITION PERFORMANCE OF SEMICONDUCTING PHOTO CATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - DECOMPOSITION OF ACETALDEHYDE |
| BS ISO 18405:2017 | Underwater acoustics. Terminology |
| BS ISO 16842:2014 | Metallic materials. Sheet and strip. Biaxial tensile testing method using a cruciform test piece |
| BS ISO 13643-1:2017 | Ships and marine technology. Manoeuvring of ships General concepts, quantities and test conditions |
| BS ISO 19973-5:2015 | Pneumatic fluid power. Assessment of component reliability by testing Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves |
| UNE-EN ISO 21809-2:2015 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014) |
| BS EN 60436 : 2008 | ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE (IEC 60436:2004, MODIFIED + A1:2009, MODIFIED + A2:2012, MODIFIED) |
| 15/30323235 DC : 0 | BS EN ISO 14171 - WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE/FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| PREN 17116-2 : DRAFT 2017 | SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS |
| DIN EN ISO 25239-4:2012-03 | FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES (ISO 25239-4:2011) |
| 10/30200334 DC : 0 | BS ISO 129-1 - TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
| IEC 62512:2012 | Electric clothes washer-dryers for household use - Methods for measuring the performance |
| ISO 19635:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for antialgal activity of semiconducting photocatalytic materials |
| BS EN ISO 19288:2016 | Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys. Classification |
| 15/30327648 DC : 0 | BS EN 12421 - MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM |
| 16/30334062 DC : 0 | BS ISO 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT SYSTEMS OF GASEOUS AND PARTICULATE EMISSIONS |
| 07/30126390 DC : 0 | BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT |
| 08/30107200 DC : DRAFT SEP 2008 | BS ISO 10241-1 - TERMINOLOGICAL ENTRIES IN STANDARDS - PART 1: GENERAL REQUIREMENTS AND EXAMPLES OF PRESENTATION |
| 12/30240396 DC : 0 | BS ISO 80003-2 - PHYSIOLOGICAL QUANTITIES AND THEIR UNITS - PART 2: PHYSICS |
| 17/30361515 DC : DRAFT SEP 2017 | BS EN ISO 2401 - WELDING CONSUMABLES - COVERED ELECTRODES - DETERMINATION OF THE EFFICIENCY, METAL RECOVERY AND DEPOSITION COEFFICIENT |
| 16/30343198 DC : 0 | BS ISO 13643-4 - SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 4: STOPPING, ACCELERATION, TRAVERSING |
| 16/30350798 DC : 0 | BS EN ISO 544 - WELDING CONSUMABLES - TECHNICAL DELIVERY CONDITIONS FOR FILLER MATERIALS AND FLUXES - TYPE OF PRODUCT, DIMENSIONS, TOLERANCES AND MARKINGS |
| I.S. EN ISO 17672:2016 | BRAZING - FILLER METALS (ISO 17672:2016) |
| BIS IS/IEC 80000-14 : 2008 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| BS EN ISO 636:2015 | Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification |
| 15/30314901 DC : 0 | BS EN ISO 14343 - WELDING CONSUMABLES - WIRE ELECTRODES, STRIP ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION |
| I.S. EN 60440:2012 | METHOD OF MEASUREMENT OF NON-LINEARITY IN RESISTORS (IEC 60440:2012 (EQV)) |
| 16/30352880 DC : 0 | BS EN 62714-1 - ENGINEERING DATA EXCHANGE FORMAT FOR USE IN INDUSTRIAL AUTOMATION SYSTEMS ENGINEERING - AUTOMATION MARKUP LANGUAGE - PART 1: ARCHITECTURE AND GENERAL REQUIREMENTS |
| BS ISO 14610:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature |
| I.S. EN ISO 17769-2:2012 | LIQUID PUMPS AND INSTALLATION - GENERAL TERMS, DEFINITIONS, QUANTITIES, LETTER SYMBOLS AND UNITS - PART 2: PUMPING SYSTEM (ISO 17769-2:2012) |
| EN 13605:2013 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| ISO/TS 15926-6:2013 | Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 6: Methodology for the development and validation of reference data |
| BS ISO 10203:2017 | Iron ores. Determination of calcium. Flame atomic absorption spectrometric method |
| BS EN ISO 14341:2011 | Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification |
| BS ISO 17536-1:2015 | Road vehicles. Aerosol separator performance test for internal combustion engines General |
| 15/30327651 DC : 0 | BS EN 12438 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| BS EN 60705 : 2015 | HOUSEHOLD MICROWAVE OVENS - METHODS FOR MEASURING PERFORMANCE |
| BS ISO 22197-5:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of methyl mercaptan |
| BIP 2221 : 2013 | IMPLEMENTING AND IMPROVING AN ENERGY MANAGEMENT SYSTEM: HOW TO MEET THE REQUIREMENTS OF ISO 50001 |
| 11/30247086 DC : 0 | BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D" |
| PD ISO/TS 17536-3:2014 | Road vehicles. Aerosol separator performance test for internal combustion engines Method to perform engine gravimetric test |
| DIN EN ISO 6892-1:2017-02 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| NF EN ISO 14341 : 2011 | WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| BS ISO 28641:2010 | Rubber compounding ingredients. Organic chemicals. General test methods |
| DIN EN ISO 19001:2013-07 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY (ISO 19001:2013) |
| DIN EN 16245-1:2013-07 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 19722:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption |
| 16/30323181 DC : 0 | BS ISO 20378 - WELDING CONSUMABLES - RODS FOR GAS WELDING OF NON ALLOY AND CREEP-RESISTING STEELS - CLASSIFICATION |
| BS ISO 24155:2016 | Hydrometry. Hydrometric data transmission systems. Specification of system requirements |
| DIN ISO 13643-3:2015-10 | SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 3: YAW STABILITY AND STEERING (ISO 13643-3:2013) |
| UNE-EN ISO 3580:2018 | Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017) |
| 16/30312315 DC : 0 | BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| ISO 9928-1:2015 | Cranes Crane operating manual Part 1: General |
| EN 13601:2013 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| UNI CEI EN ISO 80000-9 : 2013 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
| EN IEC 62884-3:2018 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators – Part 3: Frequency aging test methods |
| ISO 10676:2010 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen |
| API 6DX : 2012 | ACTUATOR SIZING AND MOUNTING KITS FOR PIPELINE VALVES |
| DIN EN ISO 13349:2012-07 | Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
| PREN 13602 : DRAFT 2011 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| UNE-EN 60350-1:2014 | Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance |
| PREN 4500-001 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| I.S. EN 60079-1:2014 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| I.S. EN 62703:2013 | EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA (IEC 62703:2013 (EQV)) |
| AWS A5.4/A5.4M : 2012 | SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| UNI EN 16481 : 2014 | TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS |
| UNE-EN ISO 80000-10:2013 | Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
| UNE-EN 16245-1:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements |
| ISO 13175-3:2012 | Implants for surgery — Calcium phosphates — Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| I.S. EN ISO 80000-9:2013 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
| IEEE/IEC C37.111-2013 REDLINE | IEEE/IEC International Standard - Measuring relays and protection equipment - Part 24: Common format for transient data exchange (COMTRADE) for power systems |
| I.S. EN ISO 80601-2-55:2018 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS (ISO 80601-2-55:2018) |
| I.S. EN ISO 3581:2016 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION (ISO 3581:2016, CORRECTED VERSION 2017-11-01) |
| IEC 60793-1-1:2017 RLV | Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance |
| AWS A5.16/A5.16M : 2013 | SPECIFICATION FOR TITANIUM AND TITANIUM-ALLOY WELDING ELECTRODES AND RODS |
| I.S. EN ISO 14341:2011 | WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| ISO 3600:2015 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format |
| ISO 15241:2012 | Rolling bearings — Symbols for physical quantities |
| ISO 8573-2:2018 | Compressed air — Contaminant measurement — Part 2: Oil aerosol content |
| I.S. EN ISO 636:2017 | WELDING CONSUMABLES - RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE-GRAIN STEELS - CLASSIFICATION (ISO 636:2017) |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| UNE-EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| UNE-EN ISO 17632:2016 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015) |
| I.S. EN ISO 17633:2018 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES AND RODS FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION (ISO 17633:2017) |
| ISO 12829:2016 | Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope |
| NF EN 62595-1-1 : 2013 | LCD BACKLIGHT UNIT - PART 1-1: GENERIC SPECIFICATION |
| ISO 28704:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of porous ceramics at room temperature |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| ISO 16630:2017 | Metallic materials — Sheet and strip — Hole expanding test |
| ISO 16332:2018 | Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency |
| I.S. EN 60350-2:2018 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
| NF EN ISO 3183 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| CSA NGV 6.1 : 2016 | COMPRESSED NATURAL GAS (CNG) FUEL STORAGE AND DELIVERY SYSTEMS FOR ROAD VEHICLES |
| DIN EN ISO 24598:2012-08 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 24598:2012) |
| DIN EN ISO 18275:2012-07 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION (ISO 18275:2011) |
| I.S. EN 4500-001:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| NF EN ISO 26304 : 2011 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| S.R. CLC/TS 50594:2015 | TUMBLE DRYERS FOR COMMERCIAL USE - METHODS FOR MEASURING THE PERFORMANCE |
| UNE-EN ISO 3581:2016 | Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2016, Corrected version 2017-11-01) |
| BS ISO 15633:2017 | Iron ores. Determination of nickel. Flame atomic absorption spectrometric method |
| NF EN ISO 14174 : 2012 | WELDING CONSUMABLES - FLUXES FOR SUBMERGED ARC WELDING AND ELECTROSLAG WELDING - CLASSIFICATION |
| EN ISO 14174:2012 | Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012) |
| IEC 62884-1:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement |
| ISO 22197-5:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 5: Removal of methyl mercaptan |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 21809-5:2017 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings |
| I.S. EN 80000-14:2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| DIN EN ISO 26304:2011-11 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 26304:2011) |
| BS EN 60456:2016 | Clothes washing machines for household use. Methods for measuring the performance |
| ISO 21809-1:2011 | Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) |
| ISO 28641:2010 | Rubber compounding ingredients Organic chemicals General test methods |
| DIN EN ISO 24034:2011-01 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID WIRES AND RODS FOR FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS - CLASSIFICATION |
| I.S. EN 60793-1-1:2017 | OPTICAL FIBRES - PART 1-1: MEASUREMENT METHODS AND TEST PROCEDURES - GENERAL AND GUIDANCE |
| ISO 26304:2017 | Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels — Classification |
| ISO 22197-4:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 4: Removal of formaldehyde |
| ISO 14817-1:2015 | Intelligent transport systems — ITS central data dictionaries — Part 1: Requirements for ITS data definitions |
| I.S. EN 60539-1:2016 | DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION |
| IEC 62715-1-1:2013 | Flexible display devices - Part 1-1: Terminology and letter symbols |
| UNE-EN ISO 717-1:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2013) |
| CSA 3.8 : 2014 | GAS-FIRED EQUIPMENT FOR DRYING FARM CROPS |
| DIN EN 13601:2013-09 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| DIN EN ISO 15791-1:2014-05 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| DIN EN 13600:2013-09 | Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013 |
| BS EN ISO 18273:2015 | Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys. Classification |
| BS EN ISO 24034:2010 | Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. Classification |
| ISO 6892-3:2015 | Metallic materials Tensile testing Part 3: Method of test at low temperature |
| ISO 17769-2:2012 | Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 2: Pumping system |
| ISO 28781:2010 | Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
| BS EN ISO 1071:2015 | Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification |
| 13/30286778 DC : 0 | BS EN 60079-1 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| ISO 13686:2013 | Natural gas Quality designation |
| BS EN 1977:2013 | Copper and copper alloys. Copper drawing stock (wire rod) |
| BS EN ISO 21952:2012 | Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels. Classification |
| ISO 27509:2012 | Petroleum and natural gas industries Compact flanged connections with IX seal ring |
| BS EN ISO 717-2:2013 | Acoustics. Rating of sound insulation in buildings and of building elements Impact sound insulation |
| PD IEC/TR 62354:2014 | General testing procedures for medical electrical equipment |
| BS EN 12421:2017 | Magnesium and magnesium alloys. Unalloyed magnesium |
| ISO 10628-1:2014 | Diagrams for the chemical and petrochemical industry Part 1: Specification of diagrams |
| DIN EN ISO 80000-10:2013-08 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
| EN 61121:2013 | Tumble dryers for household use - Methods for measuring the performance |
| EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| EN 13148:2010 | Copper and copper alloys - Hot-dip tinned strip |
| EN 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
| EN 62714-1:2014 | Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 1: Architecture and general requirements |
| CLC/TS 50640:2015 | Clothes washing machines for commercial use - Methods for measuring the performance |
| EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
| EN 60079-35-2:2012 | Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters |
| EN 12450:2012 | Copper and copper alloys - Seamless, round copper capillary tubes |
| EN 60115-8:2012 | Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors |
| EN ISO 17769-1:2012 | Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 1: Liquid pumps (ISO 17769-1:2012) |
| EN 1172:2011 | Copper and copper alloys - Sheet and strip for building purposes |
| EN 12452:2012 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| EN 61400-25-2:2015 | Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models |
| EN 62575-1:2016 | Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 60440:2012 | Method of measurement of non-linearity in resistors |
| DIN SPEC 4002-102:2011-05 | PROPERTIES AND THEIR SCOPES FOR PRODUCT DATA EXCHANGE - PART 102: UNITS AND QUANTITIES ON WWW.DINSML.NET |
| EN 62391-1:2016/AC:2016-12 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 62391-1:2015/COR1:2016) |
| DIN EN ISO 14343:2010-04 | WELDING CONSUMABLES - WIRE ELECTRODES, STRIP ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION (ISO 14343:2017) |
| API MPMS CH 15 : 2019 | Guidelines for the Use of Petroleum Industry-specific International System (SI) Units, Fourth Edition |
| CSA/ANSI NGV3.1 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| API SPEC 6D:2021+ERR 3:2023 | Specification for Valves |
| CSA/ANSI HGV 2 : 2014 | COMPRESSED HYDROGEN GAS VEHICLE FUEL CONTAINERS |
| CSA/ANSI NGV 5.2-2017 | Vehicle fueling appliances (VFA) |
| UNE-EN 60350-2:2014 | Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
| UNE-EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
| AS 1391:2020 | Metallic materials - Tensile testing - Method of test at room temperature |
| ISO 80000-9:2009 | Quantities and units Part 9: Physical chemistry and molecular physics |
| IEC 60027-1:1992 | Letters symbols to be used in electrical technology - Part 1: General |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 80000-2:2009 | Quantities and units Part 2: Mathematical signs and symbols to be used in the natural sciences and technology |
| IEC 80000-13:2008 | Quantities and units - Part 13: Information science and technology |
| IEC 60027-2:2005 | Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics |
| AS/NZS ISO 19101.2:2019 | Geographic information - Reference model Imagery |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.