ISO 3534-1:2006
Current
Current
The latest, up-to-date edition.
Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, English - French
Published date
20-10-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 3534-1:2006 defines general statistical terms and terms used in probability which may be used in the drafting of other International Standards. In addition, it defines symbols for a limited number of these terms.
| DevelopmentNote |
Supersedes ISO 3534 (04/2001) Supersedes ISO/DIS 3534-1 (10/2006)
|
| DocumentType |
Standard
|
| Pages |
105
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS Z 8101-1:2015 | Identical |
| ANSI/ISO/ASQ 3534-1:2006 | Identical |
| NS ISO 3534-1 : 1ED 2006 | Identical |
| NF ISO 3534-1 : 2007 | Identical |
| UNE-ISO 3534-1:2013 | Identical |
| DIN ISO 3534-1:2009-10 | Identical |
| UNI ISO 3534-1 : 2014 | Identical |
| PN ISO 3534-1 : 2009 | Identical |
| BS ISO 3534-1:2006 | Identical |
| UNE-ISO 3534-1:2008 | Identical |
| UNI EN ISO 19146 : 2011 | GEOGRAPHIC INFORMATION - CROSS-DOMAIN VOCABULARIES |
| 01/715682 DC : DRAFT DEC 2001 | ISO/DIS 10399 - SENSORY ANALYSIS - METHODOLOGY - DUO-TRIO TEST |
| BS ISO 14532 : 2001 AMD 15911 | NATURAL GAS - VOCABULARY |
| ISO/TS 17503:2015 | Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs |
| I.S. EN ISO 15195:2003 | LABORATORY MEDICINE - REQUIREMENTS FOR REFERENCE MEASUREMENT LABORATORIES |
| UNE-ISO 2859-4:2013 | Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels |
| CEI 56-39 : 2000 | GOODNESS-OF-FIT TESTS, CONFIDENCE INTERVALS AND LOWER CONFIDENCE LIMITS FOR WEIBULL DISTRIBUTED DATA |
| PD ISO/TR 16705:2016 | Statistical methods for implementation of Six Sigma. Selected illustrations of contingency table analysis |
| BS ISO 7870-3:2012 | Control charts Acceptance control charts |
| PREN 14181 : DRAFT 2012 | STATIONARY SOURCE EMISSIONS - QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS |
| 08/30182184 DC : DRAFT AUG 2008 | BS EN 13263-2 AMD1 - SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| BS ISO 8588:2017 | Sensory analysis. Methodology. \'A\'. \'not A\' test |
| 12/30245656 DC : 0 | ISO/DIS 3951-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| UNE-ISO 13053-1:2012 | Quantitative methods in process improvement -- Six Sigma -- Part 1: DMAIC methodology |
| BS ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| 08/30176399 DC : DRAFT JAN 2008 | BS ISO 26303-1 - MACHINE TOOLS - RELIABILITY, AVAILABILITY AND CAPABILITY - PART 1: CAPABILITY EVALUATION OF MACHINING PROCESSES ON METAL-CUTTING MACHINE TOOLS |
| BS EN ISO 13843:2017 | Water quality. Requirements for establishing performance characteristics of quantitative microbiological methods |
| 10/30218038 DC : DRAFT MAY 2010 | BS ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| ASTM E 3159 : 2018 | Standard Guide for General Reliability |
| PD CEN/TR 16220:2011 | Construction products. Assessment of release of dangerous substances. Complement to sampling |
| UNE-EN 61373:2011 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| 02/101929 DC : DRAFT FEB 2002 | PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION |
| 14/30289065 DC : 0 | BS ISO 17534-1 - ACOUSTICS - SOFTWARE FOR THE CALCULATION OF SOUND OUTDOORS - PART 1: QUALITY REQUIREMENTS AND QUALITY ASSURANCE |
| I.S. EN ISO 16140:2003 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS |
| ISO 8587:2006 | Sensory analysis Methodology Ranking |
| CEI EN 62058-11 : 2011 | ELECTRICITY METERING EQUIPMENT (A/C/) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| BS EN 61674:2013 | Medical electrical equipment. Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| I.S. EN 14350-2:2004 | CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 2: CHEMICAL REQUIREMENTS AND TESTS |
| PREN 14243-1 : DRAFT 2017 | MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 1: GENERAL DEFINITIONS RELATED TO THE METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
| SAE J2944_201506 | Operational Definitions of Driving Performance Measures and Statistics |
| ISO 2859-5:2005 | Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| 11/30170712 DC : 0 | BS EN 60050-191 ED 2.0 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 191: DEPENDABILITY |
| BS ISO 19973-1:2015 | Pneumatic fluid power. Assessment of component reliability by testing General procedures |
| BS ISO 11631:1998 | Measurement of fluid flow. Methods of specifying flowmeter performance |
| BS EN 15357:2011 | Solid recovered fuels. Terminology, definitions and descriptions |
| ISO 17450-4:2017 | Geometrical product specifications (GPS) — Basic concepts — Part 4: Geometrical characteristics for quantifying GPS deviations |
| BS ISO 11726:2017 | Solid mineral fuels. Guidelines for the validation of alternative methods of analysis |
| I.S. EN 61373:2010 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS |
| I.S. EN 13205:2002 | WORKPLACE ATMOSPHERES - ASSESSMENT OF PERFORMANCE OF INSTRUMENTS FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS |
| I.S. EN ISO 9337-2:2004 | CONTACT LENSES - DETERMINATION OF BACK VERTEX POWER - PART 2: MEASUREMENT OF CONTACT LENSES IMMERSED IN SALINE |
| I.S. EN ISO 5080:1999 | SISAL AGRICULTURAL TWINES |
| I.S. CEN TR 15310-2:2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 2: GUIDANCE ON SAMPLING TECHNIQUES |
| PD ISO/TS 17503:2015 | Statistical methods of uncertainty evaluation. Guidance on evaluation of uncertainty using two-factor crossed designs |
| ISO/TR 12845:2010 | Selected illustrations of fractional factorial screening experiments |
| BS ISO 11074:2005 | Soil quality. Vocabulary |
| OIML G 1-106 : 2012 | EVALUATION OF MEASUREMENT DATA - THE ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT |
| PD CEN ISO/TS 16491:2012 | Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests |
| BS ISO 27448:2009 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials. Measurement of water contact angle |
| 03/307701 DC : DRAFT JUNE 2003 | ISO/IEC 17000 - CONFORMITY ASSESSMENT - GENERAL VOCABULARY |
| BS ISO 6107-2 : 2006 | WATER QUALITY - VOCABULARY - PART 2 |
| I.S. CEN TS 14773:2004 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF LOSS AND SUBSTANTIAL DELAY IN PRIORITY AND FIRST CLASS SINGLE PIECE MAIL USING A SURVEY OF TEST LETTERS |
| I.S. EN 60704-3:2006 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 3: PROCEDURE FOR DETERMINING AND VERIFYING DECLARED NOISE EMISSION VALUES |
| CEI EN 60672-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| BS ISO 3951-2:2013 | Sampling procedures for inspection by variables General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| PREN ISO 80601-2-61 : DRAFT 2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| PD ISO/TR 29901:2007 | Selected illustrations of full factorial experiments with four factors |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| PD ISO/TR 13195:2015 | Selected illustrations of response surface method. Central composite design |
| BIS IS 15393-6 : 2003(R2009) | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| UNE-ISO 7870-1:2013 | Control charts. Part 1: General guidelines |
| 17/30291335 DC : 0 | BS EN ISO 8199 - WATER QUALITY - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS BY CULTURE |
| OIML G 1-100 : 2008 | EVALUATION OF MEASUREMENT DATA - GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| I.S. EN ISO 11074:2015 | SOIL QUALITY - VOCABULARY (ISO 11074:2015) |
| BS ISO 25597:2013 | Stationary source emissions. Test method for determining PM<sub>2,5</sub> and PM<sub>10</sub> mass in stack gases using cyclone samplers and sample dilution |
| 16/30340978 DC : 0 | BS ISO 19983 - RUBBER - DETERMINATION OF PRECISION OF TEST METHODS |
| 15/30327269 DC : 0 | BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| I.S. EN 15442:2011 | SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
| BS ISO 17593:2007 | Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
| 13/30213813 DC : 0 | BS EN ISO 16140-1 - MICROBIOLOGY OF FOOD AND ANIMAL FEED - METHOD VALIDATION - PART 1: VOCABULARY |
| BS ISO 28591:2017 | Sequential sampling plans for inspection by attributes |
| BS ISO 8199 : 2005 | WATER QUALITY - GENERAL GUIDANCE ON THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
| 03/306292 DC : DRAFT APR 2003 | EN 14662-1 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATION - PART 1: PUMPED SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY METHOD |
| BS 6002-2:2007 | Sampling procedures for inspection by variables General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| ISO 6879:1995 | Air quality — Performance characteristics and related concepts for air quality measuring methods |
| BS ISO 11843-3:2003 | Capability of detection Methodology for determination of the critical value for the response variable when no calibration data are used |
| BS ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of the trueness of a standard measurement method |
| 16/30333694 DC : 0 | BS EN ISO 14253-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS |
| DD ENV 12435:2000 | Medical informatics. Expression of results of measurements in health sciences |
| 11/30218527 DC : 0 | BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS |
| 03/303614 DC : DRAFT MAR 2003 | BS ISO 15202-3 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY - PART 3: ANALYSIS |
| BIS IS/ISO 15189 : 2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| 12/30242781 DC : 0 | BS EN 61331-2 - PROTECTIVE DEVICES AGAINST DIAGNOSTIC MEDICAL X-RADIATION - PART 2: TRANSLUCENT PROTECTIVE PLATES |
| 12/30247200 DC : 0 | BS ISO 3951-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
| BS ISO 11222:2002 | Air quality. Determination of the uncertainty of the time average of air quality measurements |
| 01/713866 DC : DRAFT OCT 2001 | PREN 12258-2 - ALUMINIUM AND ALUMINIUM ALLOYS - TERMS AND DEFINITIONS - PART 2: CHEMICAL ANALYSIS |
| BS ISO 28594:2017 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| BIS IS 16181 : 2014 | STATISTICAL INTERPRETATION OF DATA - TESTS AND CONFIDENCE INTERVALS RELATING TO PROPORTIONS |
| 01/562210 DC : DRAFT MAY 2001 | BS EN 14212 - AMBIENT AIR QUALITY - MEASUREMENT METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| BS EN 61358:1996 | Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2) |
| 11/30250451 DC : 0 | BS ISO 16632 - TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF WATER CONTENT - GAS-CHROMATOGRAPHIC METHOD |
| 08/30173820 DC : 0 | BS EN ISO 19146 - GEOGRAPHIC INFORMATION - CROSS-DOMAIN VOCABULARIES |
| BS EN ISO 11876:2010 | Hardmetals. Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders. Flame atomic absorption spectrometric method |
| DIN ISO 5725-6:2002-08 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| 05/30133024 DC : DRAFT APR 2005 | EN 482 - WORKPLACE ATMOSPHERES - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| EN ISO 17511:2003 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| 13/30248584 DC : 0 | BS ISO 16336 - ROBUST PARAMETER DESIGN (RPD) |
| ISO 6935-1:2007 | Steel for the reinforcement of concrete — Part 1: Plain bars |
| BS EN 62502:2011 | Analysis techniques for dependability. Event tree analysis (ETA) |
| 14/30311867 DC : 0 | BS EN 61810-2 - ELECTROMECHANICAL ELEMENTARY RELAYS - PART 2: RELIABILITY |
| BS 6002-4.1:1994 | Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming. Known standard deviation |
| BS ISO 13474:2009 | Acoustics. Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment |
| ISO/TR 24498:2006 | Paper, board and pulps Estimation of uncertainty for test methods |
| BS ISO 8518:2001 | Workplace air. Determination of particulate lead and lead compounds. Flame or electrothermal atomic absorption spectrometric method |
| BS 6068-2.91(2004) : 2004 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
| BS ISO 16632:2013 | Tobacco and tobacco products. Determination of water content.Gas-chromatographic method |
| DIN 55303-7:1996-03 | STATISTICAL INTERPRETATION OF DATA - PART 7: ESTIMATING AND TEST PROCEDURES FOR WEIBULL DISTRIBUTIONS WITH TWO PARAMETERS |
| 13/30214533 DC : 0 | BS ISO 14385-2 - STATIONARY SOURCE EMISSIONS - GREEN HOUSE GASES - PART 2: ONGOING QUALITY CONTROL OF AUTOMATED MEASURING SYSTEMS |
| BS EN ISO 4120:2007 | Sensory analysis. Methodology. Triangle test |
| 08/30180423 DC : DRAFT MAR 2008 | BS ISO 26323 - MILK PRODUCTS - DETERMINATION OF THE ACIDIFICATION ACTIVITY OF DAIRY CULTURES BY CONTINUOUS PH MEASUREMENT (CPH) |
| 10/30219542 DC : 0 | BS 6001-1/A1 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| DIN EN ISO 11132:2017-10 | Sensory analysis - Methodology - Guidelines for monitoring the performance of a quantitative sensory panel (ISO 11132:2012); German version EN ISO 11132:2017 |
| 10/30196262 DC : DRAFT JUNE 2010 | BS 6002-5 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 4: PROCEDURES FOR ASSESSMENT OF DECLARED QUALITY LEVELS |
| 07/30162536 DC : 0 | BS ISO 8196-1 - MILK - DEFINITION AND EVALUATION OF THE OVERALL ACCURACY OF ALTERNATIVE METHODS OF MILK ANALYSIS - PART 1: ANALYTICAL ATTRIBUTES OF ALTERNATIVE METHODS |
| BS ISO 21747:2006 | Statistical methods. Process performance and capability statistics for measured quality characteristics |
| BS ISO 22514-1:2014 | Statistical methods in process management. Capability and performance General principles and concepts |
| BS ISO 16269-6:2014 | Statistical interpretation of data Determination of statistical tolerance intervals |
| PD CLC/TS 50625-3-1:2015 | Collection, logistics & treatment requirements for WEEE Specification for de-pollution. General |
| ISO 10399:2017 | Sensory analysis — Methodology — Duo-trio test |
| 07/19983405 DC : DRAFT DEC 2007 | BS 6001-2 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 2: SAMPLING PLANS INDEXED BY LIMITED QUALITY (LQ) FOR ISOLATED LOT INSPECTION |
| ISO 8243:2013 | Cigarettes — Sampling |
| DIN ISO 8587:2010-08 | Sensory analysis - Methodology - Ranking (ISO 8587:2006) |
| ASTM G 169 : 2001 : R2013 | Standard Guide for Application of Basic Statistical Methods to Weathering Tests |
| BS ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| 05/30133984 DC : DRAFT MAY 2005 | BS EN 12435 - HEALTH INFORMATICS - EXPRESSION OF RESULTS OF MEASUREMENTS IN HEALTH SCIENCES |
| BS EN 61649:2008 | Weibull analysis |
| BS ISO 15790:2004 | Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty |
| BIS IS/ISO 10012 : 2003(R2009) | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| BS ISO 12745:2008 | Copper, lead and zinc ores and concentrates. Precision and bias of mass measurement techniques |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| BIS IS/ISO 10835 : 2007 | DIRECT REDUCED IRON AND HOT BRIQUETTED IRON - SAMPLING AND SAMPLE PREPARATION |
| UNI EN 15442 : 2011 | SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
| ISO/PAS 17208-1:2012 | Acoustics Quantities and procedures for description and measurement of underwater sound from ships Part 1: General requirements for measurements in deep water |
| 07/30150572 DC : 0 | ISO 25337 - PLASTICS - PRODUCTION QUALITY CONTROL - STATISTICAL METHOD FOR APPLYING SINGLE MEASUREMENTS |
| ISO 11843-4:2003 | Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value |
| BS ISO 3534-2:2006 | Statistics. Vocabulary and symbols Applied statistics |
| DD ISO/TS 7821:2005 | Tobacco and tobacco products. Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods |
| UNI CEN/TS 15511 : 2008 | POSTAL SERVICES - QUALITY OF SERVICE - INFORMATION AVAILABLE ON POSTAL SERVICES |
| BS EN 13036-8:2008 | Road and airfield surface characteristics. Test methods Determination of transverse unevenness indices |
| UNE-ISO 3534-3:2014 | Statistics -- Vocabulary and symbols -- Part 3: Design of experiments |
| ISO/TR 14468:2010 | Selected illustrations of attribute agreement analysis |
| BS EN 61810-2:2017 | Electromechanical elementary relays Reliability |
| CSA Q631 : 0 | RELIABILITY, AVAILABILITY, AND MAINTAINABILITY (RAM) DEFINITIONS |
| CSA ISO/IEC 16085 : 2007 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| CSA Z9919 : 2007 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| ISO/TR 16015:2003 | Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences |
| ISO 11222:2002 | Air quality — Determination of the uncertainty of the time average of air quality measurements |
| ISO/TS 20281:2006 | Water quality — Guidance on statistical interpretation of ecotoxicity data |
| ASTM E 2334 : 2009 | Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample |
| ISO 17123-2:2001 | Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 2: Levels |
| ISO 22514-7:2012 | Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
| ISO 2067:1998 | Granulated cork Sampling |
| I.S. EN ISO 17450-4:2018 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING GPS DEVIATIONS (ISO 17450-4:2017) |
| ISO 24153:2009 | Random sampling and randomization procedures |
| ISO 29842:2011 | Sensory analysis — Methodology — Balanced incomplete block designs |
| BS EN ISO 11132:2017 | Sensory analysis. Methodology. Guidelines for monitoring the performance of a quantitative sensory panel |
| I.S. EN 16339:2013 | AMBIENT AIR - METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE BY DIFFUSIVE SAMPLING |
| PREN ISO 2588 : DRAFT 2012 | LEATHER - SAMPLING - NUMBER OF ITEMS FOR A GROSS SAMPLE (ISO/DIS 2588:2012) |
| ISO 11056:1999 | Sensory analysis Methodology Magnitude estimation method |
| CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| I.S. EN ISO 18369-1:2017 | OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS (ISO 18369-1:2017, CORRECTED VERSION 2017-10-01) |
| BS ISO 12743:2006 | Copper, lead, zinc and nickel concentrates. Sampling procedures for determination of metal and moisture content |
| I.S. EN 61649:2008 | WEIBULL ANALYSIS |
| ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| BS ISO 5495 : 2005 | SENSORY ANALYSIS - METHODOLOGY - PAIRED COMPARISON TEST |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| ISO 12857-3:1997 | Optics and optical instruments Geodetic instruments Field procedures for determining accuracy Part 3: Electro-optical distance meters (EDM instruments) |
| ISO 21747:2006 | Statistical methods Process performance and capability statistics for measured quality characteristics |
| S.R. CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| ISO 11843-7:2012 | Capability of detection Part 7: Methodology based on stochastic properties of instrumental noise |
| ISO/TS 16550:2014 | Nanotechnologies — Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus |
| UNE-ISO 22514-1:2017 | Statistical methods in process management -- Capability and performance -- Part 1: General principles and concepts |
| I.S. EN 14534:2016 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSI TIME OF END-TO-END SERVICES FOR BULK MAIL |
| DKD-3 : 1998 | EXPRESSION OF THE UNCERTAINTY OF MEASUREMENT IN CALIBRATION |
| UNI ISO 3534-4 : 2014 | STATISTICS - VOCABULARY AND SYMBOLS - PART 4: SURVEY SAMPLING |
| PREN 14243-3 : DRAFT 2017 | MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 3: SHREDS, CUTS AND CHIPS - METHODS FOR DETERMINING THEIR DIMENSION(S) INCLUDING PROTRUDING FILAMENTS DIMENSIONS |
| ISO 28594:2017 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| ISO 28640:2010 | Random variate generation methods |
| I.S. EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| UNE-ISO 2859-1:2012 | Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| ISO 5393:2017 | Rotary tools for threaded fasteners — Performance test method |
| ISO/IEC Guide 98-1:2009 | Uncertainty of measurement — Part 1: Introduction to the expression of uncertainty in measurement |
| UNE-EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| UNI ISO 4037-1 : 2009 | X AND GAMMA REFERENCE RADIATION FOR CALIBRATING DOSEMETERS AND DOSERATE METERS AND FOR DETERMINING THEIR RESPONSE AS A FUNCTION OF PHOTON ENERGY - PART 1: RADIATION CHARACTERISTICS AND PRODUCTION METHODS |
| ISO/TS 21749:2005 | Measurement uncertainty for metrological applications — Repeated measurements and nested experiments |
| DIN EN ISO 16133:2011-09 | SOIL QUALITY - GUIDANCE ON THE ESTABLISHMENT AND MAINTENANCE OF MONITORING PROGRAMMES |
| ISO/TS 28037:2010 | Determination and use of straight-line calibration functions |
| DIN EN ISO 8199:2008-01 | Water quality - General guidance on the enumeration of micro-organisms by culture (ISO 8199:2005) |
| UNI EN 15777 : 2009 | TEXTILES - TEST METHOD FOR PHTHALATES |
| I.S. EN ISO 11132:2017 | SENSORY ANALYSIS - METHODOLOGY - GUIDELINES FOR MONITORING THE PERFORMANCE OF A QUANTITATIVE SENSORY PANEL (ISO 11132:2012) |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| FD ISO/TR 14468 : 2011 FD | SELECTED ILLUSTRATIONS OF ATTRIBUTE AGREEMENT ANALYSIS |
| UNI EN 13036-8 : 2008 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 8: DETERMINATION OF TRANSVERSE UNEVENNESS INDICES |
| I.S. EN ISO 10399:2018 | SENSORY ANALYSIS - METHODOLOGY - DUO-TRIO TEST (ISO 10399:2017) |
| ISO 15112:2011 | Natural gas Energy determination |
| I.S. EN 61674:2013 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMICONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING (IEC 61674:2012 (EQV)) |
| ISO 3951-3:2007 | Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| ISO 3951-5:2006 | Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
| DIN EN 24006:1993-08 | Measurement of fluid flow in closed conduits; vocabulary and symbols (ISO 4006:1991); German version EN 24006:1993 |
| DIN EN ISO 17294-1:2007-02 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
| PD ISO/TR 10771-2:2008 | Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Rating method |
| BS EN ISO 527-5:2009 | Plastics. Determination of tensile properties Test conditions for unidirectional fibre-reinforced plastic composites |
| BS EN 12697-38:2004 | Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration |
| BS EN 375:2001 | Information supplied by the manufacturer with in vitro diagnostic reagents for professional use |
| UNE-EN 14181:2015 | Stationary source emissions - Quality assurance of automated measuring systems |
| BS EN 12306:1998 | Biotechnology. Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination |
| BS EN 14181:2014 | Stationary source emissions. Quality assurance of automated measuring systems |
| UNE-EN 61331-2:2015 | Protective devices against diagnostic medical X-radiation - Part 2: Translucent protective plates |
| UNE-EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| UNE-EN 451-1:2017 | Method of testing fly ash - Part 1: Determination of free calcium oxide content |
| ISO/IEC 17043:2010 | Conformity assessment — General requirements for proficiency testing |
| BS EN 14662-4:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Diffusive sampling followed by thermal desorption and gas chromatography |
| BS EN 14508:2016 | Postal services. Quality of service. Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| BS EN 13528-1:2002 | Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods General requirements |
| BS EN ISO 14111:1999 | Natural gas. Guidelines to traceability in analysis |
| ISO 17511:2003 | In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials |
| I.S. EN 13263-2:2005 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| I.S. EN ISO 15189:2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15) |
| EN 15357:2011 | Solid recovered fuels - Terminology, definitions and descriptions |
| I.S. EN 838:2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| I.S. EN ISO 21187:2005 | MILK - QUANTITATIVE DETERMINATION OF BACTERIOLOGICAL QUALITY - GUIDANCE FOR ESTABLISHING AND VERIFYING A CONVERSION RELATIONSHIP BETWEEN ROUTINE METHOD RESULTS AND ANCHOR METHOD RESULTS |
| BS 6001-3:2005 | Sampling procedures for inspection by attributes Specification for skip-lot sampling procedures |
| DIN EN 13528-1:2002-12 | AMBIENT AIR QUALITY - DIFFUSIVE SAMPLERS FOR THE DETERMINATION OF CONCENTRATIONS OF GASES AND VAPOURS - REQUIREMENTS AND TEST METHODS - PART 1: GENERAL REQUIREMENTS |
| EN 13263-2:2005+A1:2009 | Silica fume for concrete - Part 2: Conformity evaluation |
| DIN EN 13528-2:2002-12 | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods |
| CEN ISO/TS 16491:2012 | Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests (ISO/TS 16491:2012) |
| DIN EN ISO 4120:2007-10 | Sensory analysis - Methodology - Triangle test (ISO 4120:2004); German version EN ISO 4120:2007 |
| EN 13416:2001 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling |
| DIN EN ISO 21187:2006-01 | Milk - Quantitative determination of bacteriological quality - Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results (ISO 21187:2004) |
| EN 12326-1:2014 | Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate |
| EN 12306:1997 | Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination |
| DIN EN 14899:2006-04 | Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a sampling plan |
| EN 12586:2007+A1:2011 | Child use and care articles - Soother holder - Safety requirements and test methods |
| DIN EN ISO 16140:2003-09 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS (ISO 16140:2003 + AMD.1:2011) |
| EN 13036-8:2008 | Road and airfield surface characteristics - Test methods - Part 8: Determination of transverse unevenness indices |
| EN 13528-2:2002 | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods |
| EN 61358:1996 | Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2) |
| CEN/TR 16625:2013 | Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value and declared value (MLV and MDV) - 95 % Statistic |
| EN 13205:2001 | Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations |
| EN 13263-1:2005+A1:2009 | Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
| EN 13549:2001 | Cleaning services - Basic requirements and recommendations for quality measuring systems |
| EN 1076:2009 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| EN 12258-2:2004 | Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
| CEN/TS 15357:2006 | Solid recovered fuels - Terminology, definitions and descriptions |
| CEN/TS 14243:2010 | Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| DIN EN 14242:2004-12 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| DIN EN ISO 16140:2011-12 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS (ISO 16140:2003 + AMD.1:2011) |
| BS 6001-5:2002 | Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels |
| CEN/TS 15442:2006 | Solid recovered fuels - Methods for sampling |
| EN 13890:2009 | Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods |
| DIN 38402-45:2003-04 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE - GENERAL INFORMATION (GROUP A) - PART 45: LABORATORY PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS (A 45) |
| EN 61649:2008 | Weibull analysis |
| BS 6001-0:2006 | Sampling procedures for inspection by attributes Introduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes |
| I.S. EN 13416:2001 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN, PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - RULES FOR SAMPLING |
| I.S. EN 14242:2004 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTRAL ANALYSIS |
| BS 6001-0(2017) : 2017 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - INTRODUCTION TO THE ISO 2859 SERIES OF STANDARDS FOR SAMPLING FOR INSPECTION BY ATTRIBUTES |
| 09/30205176 DC : 0 | ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY |
| 07/30112904 DC : 0 | BS IEC 61649 - WEIBULL ANALYSIS - GOODNESS-OF-FIT TESTS AND CONFIDENCE INTERVALS FOR WEIBULL DISTRIBUTED DATA |
| ISO 17593:2007 | Clinical laboratory testing and in vitro medical devices Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
| I.S. EN ISO 11876:2010 | HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| I.S. EN 60068-3-11:2007 | ENVIRONMENTAL TESTING - PART 3-11: SUPPORTING DOCUMENTATION AND GUIDANCE - CALCULATION OF UNCERTAINTY OF CONDITIONS IN CLIMATIC TEST CHAMBERS |
| 14/30295890 DC : 0 | BS EN 1330-1 - NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| 09/30203217 DC : 0 | BS ISO 11794 - COPPER, LEAD, ZINC AND NICKEL CONCENTRATES - SAMPLING OF SLURRIES |
| I.S. EN ISO 9337-1:2000 | CONTACT LENSES - DETERMINATION OF BACK VERTEX POWER - PART 1: METHOD USING FOCIMETER WITH MANUAL FOCUSING |
| DIN ISO 5667-14:2013-09 | WATER QUALITY - SAMPLING - PART 14: GUIDANCE ON QUALITY ASSURANCE OF ENVIRONMENTAL WATER SAMPLING AND HANDLING (ISO 5667-14:1998) |
| 02/564413 DC : DRAFT OCT 2002 | PREN 14583 - WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS |
| UNE-ISO GUIA 73:2010 IN | Risk management. Vocabulary |
| BS ISO 16820:2004 | Sensory analysis. Methodology. Sequential analysis |
| 16/30310656 DC : 0 | BS EN ISO 18369-1 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS |
| BS ISO 9611:1996 | Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted |
| UNI ISO/TR 8550-2 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 2: SAMPLING BY ATTRIBUTES |
| 17/30335786 DC : 0 | BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
| ISO 5495:2005 | Sensory analysis — Methodology — Paired comparison test |
| ISO 7078:1985 | Building construction Procedures for setting out, measurement and surveying Vocabulary and guidance notes |
| 12/30259670 DC : 0 | BS ISO/IEC GUIDE 98-4.2 - UNCERTAINTY OF MEASUREMENT - PART 4: ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT |
| 06/30112308 DC : 0 | EN ISO 13530 - WATER QUALITY - GUIDANCE ON ANALYTICAL QUALITY CONTROL FOR CHEMICAL AND PHYSICOCHEMICAL WATER ANALYSIS |
| I.S. EN 843-5:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 5: STATISTICAL ANALYSIS |
| 05/30134607 DC : DRAFT JUNE 2005 | ISO 22110 - MILK AND MILK PRODUCTS - SAMPLING - INSPECTION BY VARIABLES IN THE PRESENCE OF MEASUREMENT ERROR |
| 15/30295576 DC : 0 | BS ISO 16331-1 - OPTICS AND OPTICAL INSTRUMENTS - LABORATORY PROCEDURES FOR TESTING SURVEYING AND CONSTRUCTION INSTRUMENTS - PART 1: PERFORMANCE OF HANDHELD LASER DISTANCE METERS |
| CEI EN 60731 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY |
| 10/30209804 DC : 0 | BS ISO 7870-4 - CONTROL CHARTS - PART 4: CUMULATIVE SUM CHARTS |
| UNI ISO 7870-4 : 2014 | CONTROL CHARTS - PART 4: CUMULATIVE SUM CHARTS |
| 12/30237514 DC : 0 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| ISO/TR 24697:2011 | Textiles and textile products Guidelines on the determination of the precision of a standard test method by interlaboratory trials |
| ANSI CGATS/ISO 15790 : 2005(R2007) | GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY |
| DIN ISO 4120 E : 2005 | SENSORY ANALYSIS - METHODOLOGY - TRIANGLE TEST |
| BS ISO/IEC 16085:2006 | Systems and software engineering. Life cycle processes. Risk management |
| PD ISO/PAS 17208-1:2012 | Acoustics. Quantities and procedures for description and measurement of underwater sound from ships General requirements for measurements in deep water |
| 05/30136067 DC : DRAFT JULY 2005 | ISO 12743 - COPPER, LEAD, ZINC AND NICKEL CONCENTRATES - SAMPLING PROCEDURES FOR DETERMINATION OF METAL AND MOISTURE CONTENT |
| BS ISO 26303:2012 | Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools |
| UNI EN ISO 11876 : 2010 | HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| DD ISO/TS 17104:2006 | Rotary tool for threaded fasteners. Hydraulic impulse tools. Performance test method |
| UNI ISO 2859-10 : 2007 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 10: INTRODUCTION TO THE ISO 2859 SERIES OF STANDARDS FOR SAMPLING FOR INSPECTION BY ATTRIBUTES |
| BS ISO 3534-4:2014 | Statistics. Vocabulary and symbols Survey sampling |
| BS ISO 8196-3:2009 | Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis Protocol for the evaluation and validation of alternative quantitative methods of milk analysis |
| PD CEN/TR 10345:2013 | Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods |
| 02/400807 DC : DRAFT SEP 2002 | BS EN 14534 - POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR BULK MAIL |
| 02/400884 DC : DRAFT OCT 2002 | CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE |
| 04/300066 DC : DRAFT JAN 2004 | IEC 61300-3-41 ED.1.0 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-41: EXAMINATIONS AND MEASUREMENTS - LATERAL CORE OFFSET OF FIBRE ARRAYS |
| BS 5703(2011) : 2011 | CONTROL CHARTS - PART 4: CUMULATIVE SUM CHARTS |
| ISO 18369-1:2017 | Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and recommendations for labelling specifications |
| PD ISO GUIDE 73:2009 | Risk management. Vocabulary |
| 04/30117245 DC : DRAFT JUL 2004 | BS ISO 3534-2 - STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS |
| DIN ISO 5725-5:2002-11 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
| BS IEC 60300-3.5 : 2001 | DEPENDABILITY MANAGEMENT - PART 3-5: APPLICATION GUIDE - RELIABILITY TEST CONDITIONS AND STATISTICAL TEST PRINCIPLES |
| BS 6001-4:1994 | Sampling procedures for inspection by attributes Specification for sequential sampling plans |
| BS ISO 3951-4:2011 | Sampling procedures for inspection by variables Procedures for assessment of declared quality levels |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| 03/102246 DC : DRAFT SEP 2003 | ISO 21747 - PROCESS PERFORMANCE AND CAPABILITY STATISTICS |
| BS ISO 22514-7:2012 | Statistical methods in process management. Capability and performance Capability of measurement processes |
| DIN EN ISO 25378:2011-12 | Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) |
| DIN EN 13036-8:2008-06 | Road and airfield surface characteristics - Test methods - Part 8: Determination of transverse unevenness indices |
| BS ISO 14385-2:2014 | Stationary source emissions. Greenhouse gases Ongoing quality control of automated measuring systems |
| 04/100416 DC : 0 | IEC 61124 ED.2 - RELIABILITY TESTING - COMPLIANCE TESTS FOR CONSTANT FAILURE RATE AND CONSTANT FAILURE INTENSITY |
| NF EN 61649 : 2008 | WEIBULL ANALYSIS |
| 04/19983403 DC : DRAFT FEB 2004 | BS 6001-3 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 3: SKIP LOT SAMPLING PROCEDURES |
| DIN ISO 16820:2009-11 | Sensory analysis - Methodology - Sequential analysis (ISO 16820:2004) |
| DIN 55350-11:2008-05 | Concepts for quality management - Part 11: Supplement to DIN EN ISO 9000:2005 |
| 02/700238 DC : DRAFT FEB 2002 | ISO/CD 21187 - MILK - QUANTITATIVE DETERMINATION OF BACTERIOLOGICAL QUALITY - PROTOCOL FOR ESTABLISHING A CONVERSION RELATIONSHIP BETWEEN ROUTINE METHOD RESULTS AND ANCHOR METHOD RESULTS AND ITS VERIFICATION |
| 12/30242633 DC : 0 | BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF STATISTICAL TOLERANCE INTERVALS |
| BS ISO 8423:2008 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| BS IEC 61703 : 2001 AMD 13690 | MATHEMATICAL EXPRESSIONS FOR RELIABILITY, AVAILABILITY, MAINTAINABILITY AND MAINTENANCE SUPPORT TERMS |
| BS ISO 28640:2010 | Random variate generation methods |
| 03/111613 DC : DRAFT AUG 2003 | BS EN ISO 9919 - MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| BS ISO 16258-2:2015 | Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Method by indirect analysis |
| 15/30179639 DC : 0 | BS EN 14508 - POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| BS ISO 8243:2013 | Cigarettes. Sampling |
| GOST R ISO 6879 : 2005 | AIR QUALITY - PERFORMANCE CHARACTERISTICS AND RELATED CONCEPTS FOR AIR QUALITY MEASURING METHODS |
| 04/30112621 DC : DRAFT APR 2004 | ISO 5495 - SENSORY ANALYSIS - METHODOLOGY - PAIRED COMPARISON TEST |
| S.R. CEN/TR 10345:2013 | GUIDELINE FOR STATISTICAL DATA TREATMENT OF INTER LABORATORY TESTS FOR VALIDATION OF ANALYTICAL METHODS |
| BS 6548-5:1995 | Maintainability of equipment Guide to diagnostic testing |
| BS ISO 28590:2017 | Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| UNI ISO/TS 21749 : 2009 | MEASUREMENT UNCERTAINTY FOR METROLOGICAL APPLICATIONS - REPEATED MEASUREMENTS AND NESTED EXPERIMENTS |
| BS ISO 9276-2:2014 | Representation of results of particle size analysis Calculation of average particle sizes/diameters and moments from particle size distributions |
| BS ISO 18283:2006 | Hard coal and coke. Manual sampling |
| CSA ISO/IEC 2382-16 : 2001 : R2014 | INFORMATION TECHNOLOGY - VOCABULARY - PART 16: INFORMATION THEORY |
| DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
| ISO/IEC 10164-11:1994 | Information technology Open Systems Interconnection Systems Management: Metric objects and attributes |
| DD CEN ISO/TS 22117:2010 | Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison |
| NF ISO 8196-3 : 2009 | MILK - DEFINITION AND EVALUATION OF THE OVERALL ACCURACY OF ALTERNATIVE METHODS OF MILK ANALYSIS - PART 3: PROTOCOL FOR THE EVALUATION AND VALIDATION OF ALTERNATIVE QUANTITATIVE METHODS OF MILK ANALYSIS |
| PD ISO/TS 16550:2014 | Nanotechnologies. Determination of silver nanoparticles potency by release of muramic acid from <i>Staphylococcus</i> <i>aureus</i> |
| DD ENV 459-1:1995 | Building lime Definitions, specifications and conformity criteria |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| BS ISO 21187 : 2004 AMD 16006 | MILK - QUANTITATIVE DETERMINATION OF BACTERIOLOGICAL QUALITY - GUIDANCE FOR ESTABLISHING AND VERIFYING A CONVERSION RELATIONSHIP BETWEEN ROUTINE METHOD RESULTS AND ANCHOR METHOD RESULTS |
| 05/30124529 DC : DRAFT AUG 2005 | ISO 20552 - WORKPLACE AIR - DETERMINATION OF MERCURY VAPOUR - METHOD USING GOLD-AMALGAM COLLECTION AND ANALYSIS BY ATOMIC ABSORPTION SPECTROMETRY OR ATOMIC FLUORESCENCE SPECTROMETRY |
| 06/30149867 DC : 0 | EN 15511 - POSTAL SERVICES - QUALITY OF SERVICE - INFORMATION AVAILABLE ON POSTAL SERVICES |
| CEI EN 61373 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS |
| BS ISO 15112 : 2011 | NATURAL GAS - ENERGY DETERMINATION |
| ISO 14560:2004 | Acceptance sampling procedures by attributes Specified quality levels in nonconforming items per million |
| 18/30334086 DC : DRAFT APR 2018 | BS EN ISO 20896 - DENTISTRY - DIGITAL IMPRESSION DEVICES - METHODS FOR ASSESSING ACCURACY |
| PD CEN/TR 16797-2:2015 | Construction products: Assessment of release of dangerous substances. Guidance on the statistical assessment of declared values Technical and statistical background |
| 08/30163829 DC : DRAFT JAN 2008 | BS EN 1076 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| 05/30125041 DC : DRAFT JAN 2005 | ISO 19973-1 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 1: GENERAL PRODUCTION CALCULATION METHOD |
| BS EN ISO 18453:2005 | Natural gas. Correlation between water content and water dew point |
| BS ISO 15839 : 2003 AMD 16752 | WATER QUALITY - ON-LINE SENSORS/ANALYSING EQUIPMENT FOR WATER - SPECIFICATIONS AND PERFORMANCE TESTS |
| BS ISO 13752:1998 | Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as reference |
| NF ISO 11929 : 2010 | DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE CONFIDENCE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION |
| BS ISO 11648-2:2001 | Statistical aspects of sampling from bulk materials Sampling of particulate materials |
| 13/30282202 DC : 0 | BS EN 16622 - HYDRAULIC SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| 09/30181956 DC : DRAFT MAY 2009 | BS ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| S.R. CEN/TR 16625:2013 | FLEXIBLE SHEETS FOR WATERPROOFING - STATISTICAL DEFINITION OF MANUFACTURER'S LIMITING VALUE AND DECLARED VALUE (MLV AND MDV) - 95% STATISTIC |
| CSA ISO/IEC 16085 : 2007 : R2012 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| I.S. EN ISO 17511:2003 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN BIOLOGICAL SAMPLES - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
| DD CEN/TS 15568:2006 | Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Sampling strategies |
| BS ISO TR 5168:1998 | Measurement of fluid flow. Evaluation of uncertainties |
| 01/402850 DC : DRAFT SEP 2001 | BS 2846-9 - GUIDE TO STATISTICAL INTERPRETATION OF DATA - PART 9: DETERMINATION OF A PREDICTION INTERVAL |
| CEI EN 61358 : 1997 | ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENTE STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| DD CEN/TS 15357:2006 | Solid recovered fuels. Terminology, definitions and descriptions |
| BS ISO 7870-6:2016 | Control charts EWMA Control Charts |
| UNI CEN ISO/TS 16181 : 2011 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - DETERMINATION OF PHTHALATES IN FOOTWEAR MATERIALS |
| UNI ISO 11462-1 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 1: ELEMENTS OF SPC |
| DIN EN ISO 15112:2014-09 | Natural gas - Energy determination (ISO 15112: 2011) |
| DIN ISO 16133:2006-06 | SOIL QUALITY - GUIDANCE ON THE ESTABLISHMENT AND MAINTENANCE OF MONITORING PROGRAMMES |
| ISO/TS 7821:2005 | Tobacco and tobacco products — Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods |
| BS ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results Alternative methods for the determination of the precision of a standard measurement method |
| DIN EN 16622:2016-02 | SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| ISO 7168-2:1999 | Air quality Exchange of data Part 2: Condensed data format |
| UNI CEN/TR 10345 : 2008 | Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| ISO 16258-2:2015 | Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 2: Method by indirect analysis |
| ISO 8199:2005 | Water quality General guidance on the enumeration of micro-organisms by culture |
| UNE-EN ISO 286-1:2011 | Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) |
| UNE-EN 15357:2012 | Solid recovered fuels - Terminology, definitions and descriptions |
| UNE-ISO 7870-3:2017 | Control charts -- Part 3: Acceptance control charts |
| ISO/TR 14294:2011 | Workplace atmospheres Measurement of dermal exposure Principles and methods |
| UNE-EN 62058-11:2011 | Electricity metering equipment (a.c.) - Acceptance inspection -- Part 11: General acceptance inspection methods |
| UNE-ISO 2859-5:2014 | Sampling procedures for inspection by attributes. Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| IEC 61810-2:2017 | Electromechanical elementary relays - Part 2: Reliability |
| ASTM E 2334 : 2009 : R2013 : EDT 2 | Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample |
| ISO 28597:2017 | Acceptance sampling procedures by attributes — Specified quality levels in nonconforming items per million |
| BS ISO 11843-6:2013 | Capability of detection Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
| ISO 16820:2004 | Sensory analysis Methodology Sequential analysis |
| I.S. EN ISO 16140-1:2016 | MICROBIOLOGY OF THE FOOD CHAIN - METHOD VALIDATION - PART 1: VOCABULARY (ISO 16140-1:2016) |
| FD ISO/TR 12845 : 2010 FD | SELECTED ILLUSTRATIONS OF FRACTIONAL FACTORIAL SCREENING EXPERIMENTS |
| BS ISO 14511:2001 | Measurement of fluid flow in closed conduits. Thermal mass flowmeters |
| I.S. EN 61703:2016 | MATHEMATICAL EXPRESSIONS FOR RELIABILITY, AVAILABILITY, MAINTAINABILITY AND MAINTENANCE SUPPORT TERMS |
| ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
| I.S. EN ISO 25378:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS |
| BS ISO 11056 : 1999 | SENSORY ANALYSIS - METHODOLOGY - MAGNITUDE ESTIMATION METHOD |
| ISO 22514-3:2008 | Statistical methods in process management Capability and performance Part 3: Machine performance studies for measured data on discrete parts |
| IEC 60605-4:2001 | Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals |
| ISO 11843-3:2003 | Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used |
| UNE-ISO/IEC GUIA 98-3:2012 IN | Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| UNE-EN ISO 5667-14:2017 | Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014) |
| UNE-EN ISO 16140-1:2016 | Microbiology of the food chain - Method validation - Part 1: Vocabulary (ISO 16140-1:2016) |
| ISO 11929:2010 | Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation Fundamentals and application |
| UNI CEN ISO/TS 22117 : 2011 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - SPECIFIC REQUIREMENTS AND GUIDANCE FOR PROFICIENCY TESTING BY INTERLABORATORY COMPARISON |
| ISO/TR 18336:2016 | Guidelines for good XRF laboratory practice for the iron ore industry |
| S.R. CEN TS 15511:2008 | POSTAL SERVICES - QUALITY OF SERVICE - INFORMATION AVAILABLE ON POSTAL SERVICES |
| GOST ISO 14698-2 : 2005 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA |
| ISO 12745:2008 | Copper, lead and zinc ores and concentrates Precision and bias of mass measurement techniques |
| ISO 12743:2006 | Copper, lead, zinc and nickel concentrates Sampling procedures for determination of metal and moisture content |
| PREN ISO 15189 : DRAFT 2011 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| CSA ISO 10012-2 : 0 | QUALITY ASSURANCE FOR MEASURING EQUIPMENT - GUIDELINES FOR CONTROL OF MEASUREMENT PROCESSES |
| UNI EN ISO 25378 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS |
| BIS IS 16179-1 : 2014 | STATISTICAL METHODS - GUIDELINES FOR THE EVALUATION OF CONFORMITY WITH SPECIFIED REQUIREMENTS - PART 1: GENERAL PRINCIPLES |
| ISO/IEC 16085:2006 | Systems and software engineering — Life cycle processes — Risk management |
| UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| IEC TR 61923:1997 | Household electrical appliances - Method of measuring performance - Assessment of repeatability and reproducibility |
| ISO 29981:2010 | Milk products — Enumeration of presumptive bifidobacteria — Colony count technique at 37 degrees C |
| ISO 26303:2012 | Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools |
| CR 13695-1:2000 | Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging |
| EN 61810-2:2017 | Electromechanical elementary relays - Part 2: Reliability |
| ASTM D 7948 : 2014 : EDT 1 | Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry |
| CEN/TR 16797-2:2015 | Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 2: Technical and statistical background |
| UNI ISO 7870-3 : 2014 | CONTROL CHARTS - PART 3: ACCEPTANCE CONTROL CHARTS |
| ASTM G 169 : 2001 | Standard Guide for Application of Basic Statistical Methods to Weathering Tests |
| EN ISO 14253-1:2017 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017) |
| BS EN ISO 19146:2010 | Geographic information. Cross-domain vocabularies |
| DIN EN ISO 14253-1:2013-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013) |
| I.S. EN 14726:2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| ISO 16269-8:2004 | Statistical interpretation of data — Part 8: Determination of prediction intervals |
| ISO 16632:2013 | Tobacco and tobacco products Determination of water content Gas-chromatographic method |
| IEC 60050-101:1998 | International Electrotechnical Vocabulary (IEV) - Part 101: Mathematics |
| ISO 17123-4:2012 | Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM measurements to reflectors) |
| ISO 16020:2005 | Steel for the reinforcement and prestressing of concrete Vocabulary |
| DIN EN 13850:2013-04 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE PRIORITY MAIL AND FIRST CLASS MAIL |
| I.S. ENV 13459-3:1999 | ROAD MARKING MATERIALS - QUALITY CONTROL - PART 3: PERFORMANCE IN USE |
| DIN EN 13263-2:2009-07 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| DIN EN 1076:2010-04 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| DIN EN 14350-2:2004-11 | CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 2: CHEMICAL REQUIREMENTS AND TESTS |
| DIN EN ISO 22174:2005-05 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - POLYMERASE CHAIN REACTION (PCR) FOR THE DETECTION OF FOOD-BORNE PATHOGENS - GENERAL REQUIREMENTS AND DEFINITIONS |
| DIN EN 1465:2009-07 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| DIN EN 12697-38:2004-10 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 |
| DIN EN 12326-2:2011-09 | Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate |
| DIN EN 14534:2014-08 (Draft) | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR BULK MAIL |
| DIN EN 12326-1:2014-11 | SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE |
| DIN EN 14508:2016-06 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| BS EN 451-1:2017 | Method of testing fly ash Determination of free calcium oxide content |
| BS EN 843-5:2006 | Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Statistical analysis |
| BS EN 1465:2009 | Adhesives. Determination of tensile lap-shear strength of bonded assemblies |
| BS EN 12326-1:2014 | Slate and stone for discontinuous roofing and external cladding Specifications for slate and carbonate slate |
| BS EN 12586 : 2007 | CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS |
| IEC 62058-11:2008 | Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods |
| BS EN ISO 14532:2017 | Natural gas. Vocabulary |
| BS EN 12435:2006 | Health informatics. Expression of results of measurements in health sciences |
| BS ISO 14837-1:2005 | Mechanical vibration. Ground-borne noise and vibration arising from rail systems General guidance |
| ISO 527-5:2009 | Plastics Determination of tensile properties Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
| UNE-EN ISO 15189:2013 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| UNE-ISO 26303:2013 | Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools |
| BS EN 13890:2009 | Workplace exposure. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods |
| I.S. EN 14508:2016 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| I.S. EN 12326-2:2011 | SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 2: METHODS OF TEST FOR SLATE AND CARBONATE SLATE |
| I.S. EN 13639:2017 | DETERMINATION OF TOTAL ORGANIC CARBON IN LIMESTONE |
| I.S. EN ISO 772:2011 | HYDROMETRY - VOCABULARY AND SYMBOLS |
| I.S. EN 451-1:2017 | METHOD OF TESTING FLY ASH - PART 1: DETERMINATION OF FREE CALCIUM OXIDE CONTENT |
| EN ISO 21187:2005 | Milk - Quantitative determination of bacteriological quality - Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results (ISO 21187:2004) |
| I.S. EN 13890:2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 8320-1:2004-02 | CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - VOCABULARY - PART 1: CONTACT LENSES |
| I.S. EN 12326-1:2014 | SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE |
| I.S. EN ISO 527-5:2009 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 5: TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES |
| I.S. EN 12586:2007 | CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 13263-1:2005 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| I.S. EN ISO 14532:2017 | NATURAL GAS - VOCABULARY (ISO 14532:2014) |
| I.S. EN 14181:2014 | STATIONARY SOURCE EMISSIONS - QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS |
| I.S. EN 14042:2003 | WORKPLACE ATMOSPHERES - GUIDE FOR THE APPLICATION AND USE OF PROCEDURES FOR THE ASSESSMENT OF EXPOSURE TO CHEMICAL AND BIOLOGICAL AGENTS |
| I.S. EN 1465:2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| BS 6000:1996 | Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots |
| VDI/VDE 2649:2011-01 | Rotary tools for bolted connection - Guideline for comparative power-measurements of hydraulic impulse tools |
| VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
| PD 6532-3:2000 | Reference materials. Guide to the contents of certificates of reference materials Guide to the uses of certified reference materials |
| BS 6068-1.2:1997 | Water quality. Glossary Additional terms relating to types of water, and treatment and storage of water and waste water, and terms used in sampling and analysis of water |
| VDI 3786 Blatt 1:2013-08 | Environmental meteorology - Meteorological measurements - Fundamentals |
| BS 6068-1.2(2006) : 2006 | WATER QUALITY - VOCABULARY - PART 2 |
| BIS IS 15393-5 : 2003(R2009) | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
| BS 6002-1:2007 | Sampling procedures for inspection by variables Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| VDE 0335-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - METHODS OF TEST |
| VDE 0418-60 : 1996 | ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| BS 2846-7:1997 | Guide to statistical interpretation of data Tests for departure from normality |
| VDI 2119:2013-06 | Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration |
| BS 6245-1:2001 | Sampling tobacco and tobacco products Method of sampling batches of raw material (general principles) |
| DIN EN 60672-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| PD 6532-5:2000 | Reference materials. Guide to the contents of certificates of reference materials General requirements for the competence of reference material producers |
| DIN EN 61358 : 1996 | ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| ISO 3082:2017 | Iron ores — Sampling and sample preparation procedures |
| 08/30180284 DC : DRAFT JUNE 2008 | BS EN 1465 - ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| ISO/IEC Guide 98-4:2012 | Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment |
| ISO 9276-2:2014 | Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions |
| BS ISO 15198:2004 | Clinical laboratory medicine. In vitro diagnostic medical devices. Validation of user quality control procedures by the manufacturer |
| S.R. CEN ISO TS 22117:2010 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - SPECIFIC REQUIREMENTS AND GUIDANCE FOR PROFICIENCY TESTING BY INTERLABORATORY COMPARISON |
| BS ISO 24153:2009 | Random sampling and randomization procedures |
| 07/30148930 DC : 0 | BS ISO 11843-5 - CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| BS EN ISO 15112:2014 | Natural gas. Energy determination |
| BS ISO 26323:2009 | Milk products. Determination of the acidification activity of dairy cultures by continuous pH measurement (CpH) |
| I.S. EN ISO 19146:2010 | GEOGRAPHIC INFORMATION - CROSS-DOMAIN VOCABULARIES |
| DIN EN 15442:2011-05 | Solid recovered fuels - Methods for sampling; German version EN 15442:2011 |
| FD GUIDE ISO/IEC 98-1 : 2011 FD | UNCERTAINTY OF MEASUREMENT - PART 1: INTRODUCTION TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| 11/30237789 DC : 0 | BS ISO 22514-2 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 2: PROCESS CAPABILITY AND PERFORMANCE OF TIME-DEPENDENT PROCESS MODELS |
| DIN ISO 5725-1:1997-11 | Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
| PD CEN/TR 15310-2:2006 | Characterization of waste. Sampling of waste materials Guidance on sampling techniques |
| BS ISO 4120 : 2004 | SENSORY ANALYSIS - METHODOLOGY - TRIANGLE TEST |
| BS ISO 16336:2014 | Applications of statistical and related methods to new technology and product development process. Robust parameter design (RPD) |
| BS ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Elements of SPC |
| BS ISO 16258-1:2015 | Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Direct-on-filter method |
| BIS IS 2500-1 : 2000(R2017) | SAMPLING PROCEDURE FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| ISO/TS 17104:2006 | Rotary tool for threaded fasteners Hydraulic impulse tools Performance test method |
| BS EN ISO 25378:2011 | Geometrical product specifications (GPS). Characteristics and conditions. Definitions |
| BS EN 62058-11:2010 | Electricity metering equipment (a.c.). Acceptance inspection General acceptance inspection methods |
| I.S. EN ISO 9919:2009 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| 16/30314233 DC : 0 | BS ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE |
| BS ISO 3082:2017 | Iron ores. Sampling and sample preparation procedures |
| BS EN 61331-2:2014 | Protective devices against diagnostic medical X-radiation Translucent protective plates |
| ISO 3534-3:2013 | Statistics — Vocabulary and symbols — Part 3: Design of experiments |
| 16/30334770 DC : 0 | BS EN 60704-3 ED 3.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 3: PROCEDURE FOR DETERMINING AND VERIFYING DECLARED NOISE EMISSION VALUES |
| PD CEN/TR 16625:2013 | Flexible sheets for waterproofing. Statistical definition of manufacturer\'s limiting value and declared value (MLV and MDV). 95 % Statistic |
| 13/30280243 DC : 0 | BS ISO 5393 - ROTARY TOOLS FOR THREADED FASTENERS - PERFORMANCE TEST METHOD |
| DIN EN 15357:2011-05 | Solid recovered fuels - Terminology, definitions and descriptions |
| BS ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 3534-4:2014 | Statistics — Vocabulary and symbols — Part 4: Survey sampling |
| 04/30125776 DC : DRAFT NOV 2004 | EN 843-5 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - PART 5: STATISTICAL ANALYSIS |
| UNI ISO 13053-1 : 2014 | QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 1: DMAIC METHODOLOGY |
| BS ISO 11929:2010 | Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation. Fundamentals and application |
| 16/30335535 DC : 0 | BS ISO 12308 - PLAIN BEARINGS - QUALITY ASSURANCE - SAMPLE TYPES - DEFINITIONS, APPLICATIONS AND TESTING |
| 07/30131343 DC : 0 | ISO/DIS 772 - HYDROMETRY - VOCABULARY AND SYMBOLS |
| BS 3558-1:1997 | Glossary of rubber terms International terms |
| 02/400873 DC : DRAFT OCT 2002 | BS 6002-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
| 13/30214530 DC : 0 | BS ISO 14385-1 - STATIONARY SOURCE EMISSIONS - GREEN HOUSE GASES - PART 1: CALIBRATION OF AUTOMATED MEASURING SYSTEMS |
| BS ISO 7870-1:2014 | Control charts General guidelines |
| DIN EN 16339:2013-11 | Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
| 12/30269757 DC : 0 | BS ISO 9276-2 - REPRESENTATION OF RESULTS OF PARTICLE SIZE ANALYSIS - PART 2: CALCULATION OF AVERAGE PARTICLE SIZES/DIAMETERS AND MOMENTS FROM PARTICLE SIZE DISTRIBUTIONS |
| BS ISO 22514-2:2017 | Statistical methods in process management. Capability and performance Process capability and performance of time-dependent process models |
| BS EN ISO 16140-1:2016 | Microbiology of the food chain. Method validation Vocabulary |
| I.S. EN ISO 9339-2:1999 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF THICKNESS - PART 2: HYDROGEL CONTACT LENSES |
| I.S. EN ISO 10012:2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| 13/30260857 DC : 0 | BS ISO 5667-14 - WATER QUALITY - SAMPLING - PART 14: GUIDANCE ON QUALITY ASSURANCE AND QUALITY CONTROL OF ENVIRONMENTAL WATER SAMPLING AND HANDLING |
| 13/30247136 DC : 0 | BS EN ISO 11074 - SOIL QUALITY - VOCABULARY |
| 14/30292260 DC : 0 | BS EN 12326-1 - SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECFICIATIONS FOR SLATE AND CARBONATE SLATE |
| 05/30057945 DC : DRAFT APR 2005 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| ASTM E 1732 : 2017-09 | TERMINOLOGY RELATING TO FORENSIC SCIENCE |
| BS ISO 11794:2017 | Copper, lead, zinc and nickel concentrates. Sampling of slurries |
| 13/30280600 DC : 0 | BS ISO 7870-1 - CONTROL CHARTS - PART 1: GENERAL GUIDELINES |
| EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
| FD ISO/TR 14294 : 2011 FD | WORKPLACE ATMOSPHERES - MEASUREMENT OF DERMAL EXPOSURE - PRINCIPLES AND METHODS |
| 05/30132248 DC : DRAFT APR 2005 | EN 14547 - SAMPLING SCHEMES FOR THIRD PARTY CONFORMITY ASSESSMENT OF FINENESS IN PRECIOUS METAL ARTICLES |
| ISO/TR 10771-2:2008 | Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 2: Rating methods |
| BS EN 60068-3-11:2007 | Environmental testing Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers |
| 08/30172873 DC : DRAFT JULY 2008 | BS EN 838 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| DD ISO/TS 19036 : 2006 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GUIDELINES FOR THE ESTIMATION OF MEASUREMENT UNCERTAINTY FOR QUANTITATIVE DETERMINATIONS |
| 02/400883 DC : DRAFT OCT 2002 | CAPABILITY OF DETECTION - PART 3: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE FOR THE RESPONSE VARIABLE WHEN NO CALIBRATION DATA ARE USED |
| UNI ISO 7873 : 2014 | CONTROL CHARTS FOR ARITHMETIC AVERAGE WITH WARNING LIMITS |
| PD CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| S.R. CWA 17094-3:2016 | POLICE FIREARMS TECHNOLOGY - PART 3: POLICE SHOTGUN AMMUNITION FEATURES - RECOMMENDATIONS |
| BS EN ISO 11074:2015 | Soil quality. Vocabulary |
| 09/30137436 DC : 0 | BS ISO 24153 - RANDOM SAMPLING AND RANDOMIZATION PROCEDURES |
| 14/30282337 DC : 0 | BS ISO 17123-8 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 8: GNSS FIELD MEASUREMENT SYSTEMS IN REAL-TIME KINEMATIC (RTK) |
| PD ISO/TR 22514-4:2007 | Statistical methods in process management. Capability and performance Process capability estimates and performance measures |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| 13/30294746 DC : 0 | BS ISO 19973-1 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 1: GENERAL PROCEDURES |
| BS EN 15442:2011 | Solid recovered fuels. Methods for sampling |
| DD ISO/TS 28037:2010 | Determination and use of straight-line calibration functions |
| 01/562209 DC : DRAFT MAY 2001 | BS EN 14211 - AMBIENT AIR QUALITY - MEASUREMENT METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOOXIDE BY CHEMILUMINESCENCE |
| BS ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results Intermediate measures of the precision of a standard measurement method |
| I.S. CR 14539:2002 | STRAIGHT AMMONIUM NITRATE FERTILISERS - COMPARATIVE STUDY ON THE DETERMINATION OF POROSITY (OIL RETENTION) |
| 16/30344619 DC : 0 | BS EN ISO 20976-1 - MICROBIOLOGY OF THE FOOD CHAIN - GUIDELINES FOR CONDUCTING CHALLENGE TESTS OF FOOD AND FEED PRODUCTS - PART 1: CHALLENGE TESTS TO STUDY THE GROWTH POTENTIAL, LAG TIME AND THE MAXIMUM GROWTH RATE |
| ISO 8007-2:1999 | Carbonaceous materials used in the production of aluminium — Sampling plans and sampling from individual units — Part 2: Prebaked anodes |
| UNI ISO 24153 : 2014 | RANDOM SAMPLING AND RANDOMIZATION PROCEDURES |
| BS ISO 29842 : 2011 | SENSORY ANALYSIS - METHODOLOGY - BALANCED INCOMPLETE BLOCK DESIGNS |
| CEI EN 62502 : 2012 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA) |
| UNI ISO 11843-6 : 2014 | CAPABILITY OF DETECTION - PART 6: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE AND THE MINIMUM DETECTABLE VALUE IN POISSON DISTRIBUTED MEASUREMENTS BY NORMAL APPROXIMATIONS |
| BS 2782-3.326F(1997) : 1997 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
| PD ISO/TR 12845:2010 | Selected illustrations of fractional factorial screening experiments |
| 12/30262121 DC : 0 | BS EN ISO 2588 - LEATHER - SAMPLING - NUMBER OF ITEMS FOR A GROSS SAMPLE |
| BS ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results General principles and definitions |
| DIN EN ISO 7500-1 Beiblatt 3:1999-11 | METALLIC MATERIALS - VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES; VERIFICATION AND CALIBRATION OF THE FORCE-MEASURING SYSTEM; GENERAL FOR REQUIREMENTS, VERIFICATION AND CALIBRATION OF FATIGUE TESTING MACHINES |
| 13/30286032 DC : 0 | BS ISO 22514-1 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS |
| NF ISO 22514-7 : 2013 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| 10/30219236 DC : DRAFT DEC 2010 | BS ISO 22514-7 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| BS ISO 16331-1:2017 | Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments Performance of handheld laser distance meters |
| BS ISO 5667-14 : 2014 | WATER QUALITY - SAMPLING - PART 14: GUIDANCE ON QUALITY ASSURANCE AND QUALITY CONTROL OF ENVIRONMENTAL WATER SAMPLING AND HANDLING |
| UNE-ISO 16269-6:2015 | Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals |
| 11/30218530 DC : DRAFT FEB 2011 | BS ISO 16331-1 - OPTICS AND OPTICAL INSTRUMENTS - LABORATORY PROCEDURES FOR TESTING SURVEYING AND CONSTRUCTION INSTRUMENTS - PART 1: PERFORMANCE OF HANDHELD LASER DISTANCE METERS |
| 02/564512 DC : DRAFT OCT 2002 | BS EN ISO 9337-2 - CONTACT LENSES - DETERMINATION OF BACK VERTEX POWER - PART 2: MEASUREMENT OF CONTACT LENSES IMMERSED IN SALINE |
| 09/30142128 DC : 0 | BS ISO 11462-2 - GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
| 07/30170559 DC : DRAFT AUG 2007 | BS ISO 2314 - GAS TURBINES - ACCEPTANCE TESTS |
| UNE-ISO 28640:2013 | Random variate generation methods |
| BS ISO 11843-4:2003 | Capability of detection Methodology for comparing the minimum detectable value with a given value |
| 04/30122896 DC : DRAFT SEP 2004 | ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| BS ISO 16740:2005 | Workplace air. Determination of hexavalent chromium in airborne particulate matter. Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide |
| BS EN 3043:2008 | Aerospace series. Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286). Classification: 900 MPa/650 °C, manufacturing method optional. Technical specification |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| 17/30347911 DC : 0 | BS ISO 11929-3 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION - PART 3: APPLICATIONS TO UNFOLDING METHODS |
| BS ISO 3534-3:2013 | Statistics. Vocabulary and symbols Design of experiments |
| DD ENV 12656:1999 | Geographic information. Data description. Quality |
| 17/30328289 DC : 0 | BS ISO 11843-7 - CAPABILITY OF DETECTION - PART 7: METHODOLOGY BASED ON STOCHASTIC PROPERTIES OF INSTRUMENTAL NOISE |
| DD CEN/TS 14773:2004 | Postal services. Quality of service. Measurement of loss and substantial delay of priority and first class single piece mail using a survey of test letters |
| 02/712089 DC : DRAFT NOV 2002 | ISO 17123-7 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 7: OPTICAL PLUMBING INSTRUMENTS |
| 10/30142131 DC : 0 | BS ISO 7870-3 - CONTROL CHARTS - PART 3: PROCESS ACCEPTANCE CONTROL CHARTS |
| I.S. EN 62058-11:2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| 08/30157012 DC : DRAFT JULY 2008 | BS ISO 28640 - RANDOM VARIATE GENERATION METHODS |
| 11/30211367 DC : DRAFT JULY 2011 | BS ISO 17123-4 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 4: ELECTRO-OPTICAL DISTANCE METERS (EDM INSTRUMENTS) |
| 04/30086456 DC : DRAFT APR 2004 | BS ISO 11074 - SOIL QUALITY - VOCABULARY |
| 14/30312376 DC : 0 | BS EN 13639 - DETERMINATION OF TOTAL ORGANIC CARBON IN LIMESTONE |
| BS ISO 11843-1:1997 | Capability of detection Terms and definitions |
| 14/30296672 DC : 0 | BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
| 17/30339109 DC : 0 | BS ISO 17123-9 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 9: TERRESTRIAL LASER SCANNERS |
| BS 7208-18(1998) : 1998 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF THICKNESS - HYDROGEL CONTACT LENSES |
| 02/562450 DC : DRAFT MAY 2002 | BS EN 14412 - INDOOR AIR QUALITY - DIFFUSIVE SAMPLERS FOR THE DETERMINATION OF CONCENTRATION OF GASES AND VAPOURS - GUIDE FOR SELECTION, USE AND MAINTENANCE |
| GOST R ISO 16269-8 : 2005 | STATISTICAL METHODS - STATISTICAL INTERPRETATION OF DATA - DETERMINATION OF PREDICTION INTERVALS |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| BS EN ISO 16133:2011 | Soil quality. Guidance on the establishment and maintenance of monitoring programmes |
| ISO 26642:2010 | Food products Determination of the glycaemic index (GI) and recommendation for food classification |
| UNI EN ISO 286-1 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS |
| 99/121962 DC : DRAFT JUN 1999 | EN ISO 3126 - PLASTICS PIPING SYSTEMS - PLASTICS PIPING COMPONENTS - MEASUREMENT AND DETERMINATION OF DIMENSIONS |
| DD CEN/TS 14243:2010 | Materials produced from end of life tyres. Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| 01/560538 DC : DRAFT FEB 2001 | ISO/DIS 11222 - AIR QUALITY - DETERMINATION OF THE UNCERTAINTY OF THE TIME AVERAGE OF AIR QUALITY MEASUREMENTS |
| 02/706195 DC : DRAFT JUN 2002 | ISO/DIS 22174 - MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - POLYMERASE CHAIN REACTION (PCR) FOR THE DETECTION OF FOOD-BORNE PATHOGENS - GENERAL METHOD SPECIFIC REQUIREMENTS |
| DD ENV ISO/TR 13843:2001 | Water quality. Guidance on validation of microbiological methods |
| UNE-ISO 16133:2011 | Soil quality -- Guidance on the establishment and maintenance of monitoring programmes. |
| UNI ISO 22514-7:2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| 04/30088722 DC : DRAFT APR 2004 | ISO 18369-1 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: TERMINOLOGY |
| CSA ISO/IEC 16085 : 2007 : R2017 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| CSA Z9919 :2007 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| CSA ISO/IEC 2382-16 : 2001 : R2005 : FR | INFORMATION TECHNOLOGY - VOCABULARY - PART 16: INFORMATION THEORY |
| S.R. CEN/TR 16797-2:2015 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - GUIDANCE ON THE STATISTICAL ASSESSMENT OF DECLARED VALUES - PART 2: TECHNICAL AND STATISTICAL BACKGROUND |
| ISO 7870-6:2016 | Control charts — Part 6: EWMA control charts |
| BS EN 60704-3:2006 | Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Procedure for determining and verifying declared noise emission values |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| ISO Guide 80:2014 | Guidance for the in-house preparation of quality control materials (QCMs) |
| ISO 11726:2017 | Solid mineral fuels Guidelines for the validation of alternative methods of analysis |
| BS EN 60731:2012 | Medical electrical equipment. Dosimeters with ionization chambers as used in radiotherapy |
| PD 6461-3:1995 | General metrology Guide to the expression of uncertainty in measurement (GUM) |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| BS ISO 8587 : 2006 | SENSORY ANALYSIS - METHODOLOGY - RANKING |
| I.S. EN 13036-8:2008 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 8: DETERMINATION OF TRANSVERSE UNEVENNESS INDICES |
| I.S. EN ISO 13843:2017 | WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS (ISO 13843:2017) |
| UNI ISO 11095 : 2010 | LINEAR CALIBRATION USING REFERENCE MATERIALS |
| CEI EN 61810-2 : 2012 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 2: RELIABILITY |
| UNI ISO 11843-1 : 2009 | CAPABILITY OF DETECTION - PART 1: TERMS AND DEFINITIONS |
| I.S. EN ISO 8199:2007 | WATER QUALITY - GENERAL GUIDANCE ON THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
| ONORM EN 14726 : 2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| ISO/TR 29901:2007 | Selected illustrations of full factorial experiments with four factors |
| ISO 8422:2006 | Sequential sampling plans for inspection by attributes |
| ISO 6658:2017 | Sensory analysis — Methodology — General guidance |
| I.S. EN ISO/IEC 17043:2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| ISO 7870-1:2014 | Control charts Part 1: General guidelines |
| S.R. CEN ISO/TS 16491:2012 | GUIDELINES FOR THE EVALUATION OF UNCERTAINTY OF MEASUREMENT IN AIR CONDITIONER AND HEAT PUMP COOLING AND HEATING CAPACITY TESTS (ISO/TS 16491:2012) |
| I.S. EN 16622:2015 | SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| ISO/IEC Guide 43-1:1997 | Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes |
| CEN/TR 14547:2005 | Sampling schemes for third party conformity assessment of fineness in precious metal articles |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| UNE-EN 16339:2014 | Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
| BS EN 14534:2016 | Postal services. Quality of service. Measurement of the transit time of end-to-end services for bulk mail |
| I.S. EN 61331-2:2014 | PROTECTIVE DEVICES AGAINST DIAGNOSTIC MEDICAL X-RADIATION - PART 2: TRANSLUCENT PROTECTIVE PLATES |
| UNI ISO 11843-2 : 2009 | CAPABILITY OF DETECTION - PART 2: METHODOLOGY IN THE LINEAR CALIBRATION CASE |
| ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| EN ISO 10399:2018 | Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017) |
| UNI CEI EN ISO/IEC 17043 : 2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| UNI ISO 3534-2 : 2014 | STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS |
| UNI ISO/TR 8550-3 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 3: SAMPLING BY VARIABLES |
| NFC 01 101 : 1999 | ELECTROTECHNICAL VOCABULARY - CHAPTER 101: MATHEMATICS |
| ISO 17123-7:2005 | Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 7: Optical plumbing instruments |
| EN ISO 16133:2011 | Soil quality - Guidance on the establishment and maintenance of monitoring programmes (ISO 16133:2004) |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| ISO 7168-1:1999 | Air quality Exchange of data Part 1: General data format |
| UNI EN ISO 8199 : 2008 | WATER QUALITY - GENERAL GUIDANCE ON THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
| ISO Guide 73:2009 | Risk management — Vocabulary |
| ISO 14385-2:2014 | Stationary source emissions — Greenhouse gases — Part 2: Ongoing quality control of automated measuring systems |
| ISO/TR 12888:2011 | Selected illustrations of gauge repeatability and reproducibility studies |
| ISO/TR 8550-1:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 1: Acceptance sampling |
| ISO 10725:2000 | Acceptance sampling plans and procedures for the inspection of bulk materials |
| ISO/TR 8550-2:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 2: Sampling by attributes |
| ISO 13320:2009 | Particle size analysis Laser diffraction methods |
| BS EN ISO 15195:2003 | Laboratory medicine. Requirements for reference measurement laboratories |
| ISO/IEC 10164-13:1995 | Information technology Open Systems Interconnection Systems Management: Summarization Function |
| ISO/IEC Guide 73:2002 | Risk management Vocabulary Guidelines for use in standards |
| S.R. CR 13695-1:2000 | PACKAGING - REQUIREMENTS FOR MEASURING AND VERIFYING THE FOUR HEAVY METALS AND OTHER DANGEROUS SUBSTANCES PRESENT IN PACKAGING AND THEIR RELEASE INTO THE ENVIRONMENT - PART 1: REQUIREMENTS FOR MEASURING AND VERIFYING THE FOUR HEAVY METALS PRESENT IN PACKAGING |
| ISO 11095:1996 | Linear calibration using reference materials |
| ISO 7870:1993 | Control charts General guide and introduction |
| I.S. EN ISO 5495:2007 | SENSORY ANALYSIS - METHODOLOGY - PAIRED COMPARISON TEST |
| IEC 60050-521:2002 | International Electrotechnical Vocabulary (IEV) - Part 521: Semiconductor devices and integrated circuits |
| ISO 16269-7:2001 | Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals |
| ISO 15195:2003 | Laboratory medicine Requirements for reference measurement laboratories |
| ISO 18283:2006 | Hard coal and coke Manual sampling |
| NF EN 60704-3 : 2006 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 3: PROCEDURE FOR DETERMINING AND VERIFYING DECLARED NOISE EMISSION VALUES |
| DIN EN 13263-1:2009-07 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| DIN EN 12586:2011-04 | Child use and care articles - Soother holder - Safety requirements and test methods (includes Amendment A1:2011) |
| DIN EN ISO 527-4:1997-07 | Determination of tensile properties of plastics - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997) |
| DIN EN 14181:2015-02 | Stationary source emissions - Quality assurance of automated measuring systems |
| DIN EN ISO 5555:2014-10 | ANIMAL AND VEGETABLE FATS AND OILS - SAMPLING (ISO 5555:2001 + AMD 1:2014) |
| DIN EN 13890:2010-01 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 15189:2014-11 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| BS EN ISO 9919:2009 | Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use |
| BS EN 13549:2001 | Cleaning services. Basic requirements and recommendations for quality measuring systems |
| BS EN 14726:2005 | Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis |
| BS EN ISO 14698-2:2003 | Cleanrooms and associated controlled environments. Biocontamination control Evaluation and interpretation of biocontamination data |
| BS EN ISO 17294-1:2006 | Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS) General guidelines |
| BS EN 1076:2009 | Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods |
| BS EN 13263-2 : 2005 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| BS EN ISO 8320-1:2003 | Contact lenses and contact lens care products. Vocabulary Contact lenses |
| ISO 14837-1:2005 | Mechanical vibration Ground-borne noise and vibration arising from rail systems Part 1: General guidance |
| ISO 13053-1:2011 | Quantitative methods in process improvement Six Sigma Part 1: DMAIC methodology |
| BS EN 14662-1:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Pumped sampling followed by thermal desorption and gas chromatography |
| BS EN ISO 9337-1:2001 | Contact lenses. Determination of back vertex power Method using focimeter with manual focusing |
| UNE-EN 12326-2:2012 | Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate |
| EN ISO 11074:2015 | Soil quality - Vocabulary (ISO 11074:2015) |
| UNE-ISO 6107-2:2010 | Water quality. Vocabulary. Part 2. |
| EN 13850:2012 | Postal Services - Quality of Services - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail |
| UNE-CEN/TS 14243:2012 EX | Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| I.S. EN ISO 14698-2:2003 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA |
| EN ISO 19146:2010 | Geographic information - Cross-domain vocabularies (ISO 19146:2010) |
| I.S. EN 13850:2012 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE PRIORITY MAIL AND FIRST CLASS MAIL |
| EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| OVE/ONORM EN 60704-3 : 2006 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 3: PROCEDURE FOR DETERMINING AND VERIFYING DECLARED EMISSION VALUES |
| UNI EN 13850 : 2013 | POSTAL SERVICES - QUALITY OF SERVICES - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE PRIORITY MAIL AND FIRST CLASS MAIL |
| EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| EN ISO 16140-1:2016 | Microbiology of the food chain - Method validation - Part 1: Vocabulary (ISO 16140-1:2016) |
| EN ISO 772:2011 | Hydrometry - Vocabulary and symbols (ISO 772:2011) |
| EN 14136:2004 | Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures |
| EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| UNI EN ISO 16140 : 2011 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS |
| UNI EN 1076 : 2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 14243 : 2010 | MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
| UNI EN 1465 : 2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH BONDED ASSEMBLIES |
| UNI EN 13263-1 : 2009 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| BS 2846-8:2001 | Guide to statistical interpretation of data Median. Estimation and confidence intervals |
| UNI EN ISO 15189 : 2013 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| UNI EN 13263-2 : 2009 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| I.S. EN ISO 14126:2000 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
| UNI ISO 3951-2 : 2014 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| EN ISO 9919:2009 | Medical electrical equipment - Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use (ISO 9919:2005) |
| UNI EN ISO 9919 : 2009 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| UNI EN 12326-2 : 2011 | SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 2: METHODS OF TEST FOR SLATE AND CARBONATE SLATE |
| UNI EN 12586 : 2011 | CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 13890 : 2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| ONORM EN ISO 527-5 : 2009 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 5: TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES |
| ENV 12656 : DRAFT 1998 | GEOGRAPHIC INFORMATION - DATA DESCRIPTION - QUALITY |
| ENV 13459-3 : DRAFT 1999 | ROAD MARKING MATERIALS - QUALITY CONTROL - PART 3: PERFORMANCE IN USE |
| UNI EN ISO 5555 : 2014 | ANIMAL AND VEGETABLE FATS AND OILS - SAMPLING - AMENDMENT 1: FLEXITANKS |
| UNI ISO 14837-1 : 2013 | MECHANICAL VIBRATION - GROUND-BORNE NOISE AND VIBRATION ARISING FROM RAIL SYSTEMS - PART 1: GENERAL GUIDANCE |
| UNI ISO 13053-2 : 2014 | QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
| UNI EN 12326-1 : 2014 | SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE |
| UNI EN 838 : 2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| Z316.8-18 | Requirements for the design, development, and validation of laboratory-developed tests used for the screening, diagnosis, and management of clinical conditions |
| EN 15442:2011 | Solid recovered fuels - Methods for sampling |
| ISO 4037-1:1996 | X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy Part 1: Radiation characteristics and production methods |
| 06/30141610 DC : DRAFT AUG 2006 | ISO 20612 - WATER QUALITY - INTERLABORATORY COMPARISONS FOR PROFICIENCY TESTING OF ANALYTICAL TESTING LABORATORIES |
| BS ISO 26642:2010 | Food products. Determination of the glycaemic index (GI) and recommendation for food classification |
| BS ISO 13053-2:2011 | Quantitative methods in process improvement. Six Sigma Tools and techniques |
| ISO 7873:1993 | Control charts for arithmetic average with warning limits |
| BS ISO 11132 : 2012 | SENSORY ANALYSIS - METHODOLOGY - GUIDELINES FOR MONITORING THE PERFORMANCE OF A QUANTITATIVE SENSORY PANEL |
| BIS IS/ISO/IEC GUIDE 43-1 : 1997 | PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS - GUIDELINES - PART 1: DEVELOPMENT AND OPERATION OF PROFICIENCY TESTING SCHEME |
| BS EN ISO 8199:2007 | Water quality. General guidance on the enumeration of micro-organisms by culture |
| I.S. EN ISO 16133:2011 | SOIL QUALITY - GUIDANCE ON THE ESTABLISHMENT AND MAINTENANCE OF MONITORING PROGRAMMES |
| 14/30314227 DC : 0 | BS ISO 22514-4 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 4: PROCESS CAPABILITY ESTIMATES AND PERFORMANCE MEASURES |
| 08/19974897 DC : DRAFT JULY 2008 | BS ISO 16269-4 - STATISTICAL INTERPRETATION OF DATA - PART 4: DETECTION AND TREATMENT OF OUTLIERS |
| BS EN 16339:2013 | Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
| 17/30365077 DC : 0 | BS EN 14243-3 - MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 3: SHREDS, CUTS AND CHIPS - METHODS FOR DETERMINING THEIR DIMENSION(S) INCLUDING PROTRUDING FILAMENTS DIMENSIONS |
| BS ISO 16269-8:2004 | Statistical interpretation of data Determination of prediction intervals |
| UNI ISO 11843-5 : 2014 | CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| 12/30271500 DC : 0 | BS ISO GUIDE 80 - GUIDANCE FOR IN-HOUSE PRODUCTION OF REFERENCE MATERIALS FOR QUALITY CONTROL (QCMS) |
| BS IEC 60605-4:2001 | Equipment reliability testing Statistical procedures for exponential distribution. Point estimates, confidence intervals, prediction intervals and tolerance intervals |
| DIN 1319-3:1996-05 | FUNDAMENTALS OF METROLOGY - PART 3: EVALUATION OF MEASUREMENTS OF A SINGLE MEASURE AND, MEASUREMENT CERTAINTY |
| BS EN ISO 286-1:2010 | Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits |
| NF EN ISO 25378 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS |
| CLSI MM14 A : 1ED 2005 | PROFICIENCY TESTING (EXTERNAL QUALITY ASSESSMENT) FOR MOLECULAR METHODS |
| ASTM E 2334 : 2009 : R2013 : EDT 1 | Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample |
| 00/402294 DC : DRAFT MARCH 2000 | DRAFT BS ISO 10012 - MEASUREMENT CONTROL SYSTEM |
| DD CEN/TS 15442:2006 | Solid recovered fuels. Methods for sampling |
| EN ISO 17450-4:2018 | Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017) |
| PD ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| PD ISO/TR 14294:2011 | Workplace atmospheres. Measurement of dermal Exposure. Principles and methods |
| BS ISO 4037-1:1996 | X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy Radiation characteristics and production methods |
| PREN 1330-1 : DRAFT 2014 | NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| BS EN 61373:2010 | Railway applications. Rolling stock equipment. Shock and vibration tests |
| 04/30110040 DC : DRAFT FEB 2004 | BS 6001-4 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 4: SYSTEM OF SEQUENTIAL SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| 17/30344899 DC : 0 | BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS |
| UNE-EN 16622:2016 | Silica-calcium fume for concrete - Definitions, requirements and conformity criteria |
| BS 7755-1.2:1999 | Soil quality. Terminology and classification Terms and definitions relating to sampling |
| 01/705123 DC : DRAFT APR 2001 | ISO/DIS 17123-6 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 6: ROTATING LASERS |
| BS ISO 17534-1:2015 | Acoustics. Software for the calculation of sound outdoors Quality requirements and quality assurance |
| 03/116099 DC : DRAFT NOV 2003 | |
| 16/30279101 DC : DRAFT MAR 2016 | BS EN ISO 13843 - WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS |
| ISO 15202-3:2004 | Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Analysis |
| PREN 14508 : DRAFT 2015 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| UNI ISO 3534-3 : 2014 | STATISTICS - VOCABULARY AND SYMBOLS - PART 3: DESIGN OF EXPERIMENTS |
| UNI ISO 3951-4 : 2014 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 4: PROCEDURES FOR ASSESSMENT OF DECLARED QUALITY LEVELS |
| BS ISO 3951-1:2013 | Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| DD ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| BIS IS 15202-2 : 2012(R2017) | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
| DIN ISO 5725-3:2003-02 | Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001) |
| 00/560160 DC : DRAFT JAN 2000 | BS ISO 15197 DETERMINATION OF PERFORMANCE CRITERIA FOR IN VITRO BLOOD GLUCOSE MONITORING SYSTEMS FOR MANAGEMENT OF HUMAN DIABETES MELLITUS |
| 11/30173018 DC : 0 | BS EN ISO 15189 - MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| BS ISO/IEC 10164-11:1994 | Information technology. Open systems interconnection. Systems management Metric objects and attributes |
| BS ISO 6879:1995 | Air quality. Performance characteristics and related concepts for air quality measuring methods |
| 09/30194820 DC : 0 | BS EN 60731 - MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY |
| OIML G 1-104 : 2009 | EVALUATION OF MEASUREMENT DATA - AN INTRODUCTION TO THE "GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT" AND RELATED DOCUMENTS |
| BS ISO 12771:1997 | Plastics laboratory ware. Disposable serological pipettes |
| 01/705122 DC : DRAFT APR 2001 | ISO/DIS 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: ELECTRONIC TACHOMETERS |
| BS EN ISO 5495 : 2007 | SENSORY ANALYSIS - METHODOLOGY - PAIRED COMPARISON TEST (ISO 5495:2005) |
| BS 2782-3.326G(1997) : 1997 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES |
| UNE-ISO 16269-4:2015 | Statistical interpretation of data -- Part 4: Detection and treatment of outliers |
| DIN ISO 29842:2013-04 | SENSORY ANALYSIS - METHODOLOGY - BALANCED INCOMPLETE BLOCK DESIGNS (ISO 29842:2011) |
| 15/30280509 DC : 0 | BS EN ISO 1891-4 - FASTENERS - TERMINOLOGY - PART 4: CONTROLS, INSPECTION, DELIVERY, ACCEPTANCE AND QUALITY |
| 11/30208525 DC : 0 | BS EN ISO 15197 - IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| UNI EN ISO 16133 : 2011 | SOIL QUALITY - GUIDANCE ON THE ESTABLISHMENT AND MAINTENANCE OF MONITORING PROGRAMMES |
| ISO 7870-3:2012 | Control charts Part 3: Acceptance control charts |
| BS ISO 28597:2017 | Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million |
| PD ISO/TR 13587:2012 | Three statistical approaches for the assessment and interpretation of measurement uncertainty |
| BS ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results Use in practice of accuracy values |
| 08/30166515 DC : DRAFT APR 2008 | BS ISO 27448-1 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR SELF-CLEANING PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 1: MEASUREMENT OF WATER CONTACT ANGLE |
| ISO 15198:2004 | Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer |
| BS ISO 14560:2004 | Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million |
| UNE-EN 15777:2010 | Textiles - Test method for phthalates |
| DIN ISO 16632:2015-12 | Tobacco and tobacco products - Determination of water content - Gas-chromatographic method (ISO 16632:2013) |
| DIN EN ISO 11876:2010-12 | Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) |
| OIML G 20 : 2017 | SURVEILLANCE OF UTILITY METERS IN SERVICE ON THE BASIS OF SAMPLING INSPECTIONS |
| 04/30119227 DC : DRAFT SEP 2004 | BS ISO 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| BS ISO 10399 : 2004 | SENSORY ANALYSIS - METHODOLOGY - DUO-TRIO TEST |
| 01/562616 DC : DRAFT JUL 2001 | EN 14181 - STATIONARY SOURCE EMISSIONS - QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS |
| BS ISO 10835:2007 | Direct reduced iron and hot briquetted iron. Sampling and sample preparation |
| S.R. CLC/TS 50625-3-1:2015 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-1: SPECIFICATION FOR DE-POLLUTION - GENERAL |
| UNI EN 15357 : 2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| UNI ISO 11462-2 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
| 15/30281629 DC : 0 | BS EN 61703 - MATHEMATICAL EXPRESSIONS FOR RELIABILITY, AVAILABILITY, MAINTAINABILITY AND MAINTENANCE SUPPORT TERMS |
| BS ISO 17123-8:2015 | Optics and optical instruments. Field procedures for testing geodetic and surveying instruments GNSS field measurement systems in real-time kinematic (RTK) |
| DIN 6800-1:2016-08 | Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 1: General |
| 01/561148 DC : DRAFT MAR 2001 | BS EN 14136 - USE OF EXTERNAL QUALITY ASSESSMENT SCHEMES IN THE ASSESSMENT OF THE PERFORMANCE OF IN VITRO DIAGNOSTIC PROCEDURES |
| BS 6001-5:2000 | Sampling procedures for inspection by attributes Procedures for assessment of stated quality levels |
| 09/30191982 DC : 0 | BS ISO 21748 - GUIDANCE FOR THE USE OF REPEATABILITY, REPRODUCIBILITY AND TRUENESS ESTIMATES IN MEASUREMENT UNCERTAINTY ESTIMATION |
| I.S. CEN TS 15442:2006 | SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
| BS ISO 17294-1 : 2004 AMD 16802 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
| I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| S.R. CWA 17094-1:2016 | POLICE FIREARMS TECHNOLOGY - PART 1: POLICE PISTOL AND RIFLE AMMUNITION FEATURES - RECOMMENDATIONS |
| 16/30301962 DC : 0 | BS ISO 3082 - IRON ORES - SAMPLING AND SAMPLE PREPARATION PROCEDURES |
| PD ISO/TR 12888:2011 | Selected illustrations of gauge repeatability and reproducibility studies |
| ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| 04/30085780 DC : DRAFT FEB 2004 | BS 6001-7 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - ACCEPT-ZERO SAMPLING SYSTEM BASED ON CREDIT PRINCIPLE FOR CONTROLLING OUTGOING QUALITY |
| 12/30266246 DC : DRAFT SEP 2012 | BS ISO 8243 - CIGARETTES - SAMPLING |
| DD CEN ISO/TS 16181:2011 | Footwear. Critical substances potentially present in footwear and footwear components. Determination of phthalates in footwear materials |
| 07/30162549 DC : 0 | BS ISO 8196-3 - MILK - DEFINITION AND EVALUATION OF THE OVERALL ACCURACY OF ALTERNATIVE METHODS OF MILK ANALYSIS - PART 3: PROTOCOL FOR THE EVALUATION AND VALIDATION OF ALTERNATIVE QUANTITATIVE METHODS OF MILK ANALYSIS |
| 10/30199110 DC : 0 | BS ISO 3534-3 - STATISTICS - VOCABULARY AND SYMBOLS - PART 3: DESIGN OF EXPERIMENTS |
| 11/30217467 DC : 0 | BS ISO 17123-6 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 6: ROTATING LASERS |
| BS ISO 5538:2004 | Milk and milk products. Sampling. Inspection by attributes |
| BS ISO 14385-1:2014 | Stationary source emissions. Greenhouse gases Calibration of automated measuring systems |
| PD 6545:2005 | Intended use of human head and ear simulators-guide |
| UNE-EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| BS ISO 11843-2:2000 | Capability of detection Methodology in the linear calibration case |
| BS EN 16622:2015 | Silica-calcium fume for concrete. Definitions, requirements and conformity criteria |
| 05/19987349 DC : DRAFT JAN 2005 | BS ISO 8422 - SEQUENTIAL SAMPLING PLANS FOR INSPECTION BY ATTRIBUTES |
| 06/30146511 DC : 0 | BS ISO 18113-1 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| 03/109441 DC : DRAFT JUNE 2003 | EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| 10/30217545 DC : 0 | BS EN 61674 - MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING |
| UNI ISO 11843-4 : 2014 | CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE |
| 15/30284673 DC : 0 | BS EN ISO 17450-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING FORM, ORIENTATION LOCATION AND RUN-OUT DEVIATION |
| BS ISO 16020:2005 | Steel for the reinforcement and prestressing of concrete. Vocabulary |
| BS ISO 15202-3:2004 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Analysis |
| BS EN ISO 18369-1:2017 | Ophthalmic optics. Contact lenses Vocabulary, classification system and recommendations for labelling specifications |
| 08/30175755 DC : DRAFT APR 2008 | BS EN 15777 - TEXTILES - TEST METHODS FOR PHTHALATES |
| ISO 11843-5:2008 | Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases |
| UNI ISO 22514-3 : 2010 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 3: MACHINE PERFORMANCE STUDIES FOR MEASURED DATA ON DISCRETE PARTS |
| BS ISO 13053-1:2011 | Quantitative methods in process improvement. Six Sigma DMAIC methodology |
| PD ISO/IEC Guide 73:2002 | Risk management. Vocabulary. Guidelines for use in standards |
| 13/30285104 DC : 0 | BS ISO 7870-6 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CONTROL CHARTS - PART 6: EWMA CONTROL CHARTS |
| 17/30347905 DC : 0 | BS ISO 11929-1 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION - PART 1: ELEMENTARY APPLICATIONS |
| 03/103002 DC : DRAFT JAN 2003 | BS ISO 139 - TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| 01/715700 DC : 0 | ISO/DIS 16632 - TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF WATER CONTENT - GAS CHROMATOGRAPHIC METHOD |
| 09/30169892 DC : 0 | BS EN 62502 - ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| UNE-ISO 3951-1:2012 | Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| ASTM G 169 : 2001 : R2008 : EDT 1 | Standard Guide for Application of Basic Statistical Methods to Weathering Tests |
| BS 6002-4:2006 | Sampling procedures for inspection by variables Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
| 02/103921 DC : DRAFT JUN 2002 | ISO/DIS 863 - METHODS OF TESTING CEMENT - POZZOLANICITY TEST FOR POZZOLANIC CEMENT |
| ISO/TR 24430:2003 | Paints and varnishes Guidelines for the determination of the precision of a test method by interlaboratory trials |
| CSA ISO/IEC 2382-16 : 2001 : R2009 | INFORMATION TECHNOLOGY - VOCABULARY - PART 16: INFORMATION THEORY |
| UNE-EN 61649:2012 | Weibull analysis |
| UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| ISO/TS 17444-2:2017 | Electronic fee collection — Charging performance — Part 2: Examination framework |
| ISO 3951-2:2013 | Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| UNE-ISO 2859-10:2013 | Sampling procedures for inspection by attributes -- Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| GOST R ISO 16269-6 : 2005 | STATISTICAL METHODS - STATISTICAL INTERPRETATION OF DATA - DETERMINATION OF STATISTICAL TOLERANCE INTERVALS |
| I.S. EN ISO 14253-1:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2017) |
| ISO 25597:2013 | Stationary source emissions Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 10576-1:2003 | Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles |
| IEEE/ISO/IEC 16085-2006 | ISO/IEC/IEEE International Standard - Systems and Software Engineering - Life Cycle Processes - Risk Management |
| ISO 22514-4:2016 | Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
| S.R. CEN/TR 16220:2011 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - COMPLEMENT TO SAMPLING |
| ANSI/ASSE Z690 PACKAGE : 2011 | ANSI/ASSE Z690.1-2011 - VOCABULARY FOR RISK MANAGEMENT; ANSI/ASSE Z690.2-2011 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES; ANSI/ASSE Z690.3-2011 - RISK ASSESSMENT TECHNIQUES; ISO/ANSI/ASSE/TR-31004-2014 (Z690 TR-2014) RISK MANAGEMENT-GUIDANCE FOR THE IMPLEMENTATION OF ISO 31004 |
| ISO 12491:1997 | Statistical methods for quality control of building materials and components |
| CSA Z15189 : 2003 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO 13843:2017 | Water quality — Requirements for establishing performance characteristics of quantitative microbiological methods |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| I.S. EN 62502:2010 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA) |
| NF ISO 11462-2 : 2010 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
| I.S. EN 61810-2:2017 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 2: RELIABILITY |
| ISO 39511:2018 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| ANSI/ASSE Z690.1 : 2011 | VOCABULARY FOR RISK MANAGEMENT |
| ISO 19983:2017 | Rubber — Determination of precision of test methods |
| PREN ISO 16140 : DRAFT 1999 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS |
| CEI EN 61078 : 2006 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - RELIABILITY BLOCK DIAGRAM AND BOOLEAN METHODS |
| ISO 7870-5:2014 | Control charts — Part 5: Specialized control charts |
| UNI ISO 22514-1 : 2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS |
| SWIFT 31000:2010 | NATIONAL GUIDANCE ON IMPLEMENTING I.S. ISO 31000:2009 RISK MANAGEMENT - PRINCIPLES AND GUIDELINES |
| CEI EN 61674 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING |
| BS ISO 5393:2017 | Rotary tools for threaded fasteners. Performance test method |
| PREN 14243-2 : DRAFT 2017 | MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 2: GRANULATES AND POWDERS - METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES, INCLUDING FREE STEEL AND FREE TEXTILE CONTENT |
| 17/30365074 DC : 0 | BS EN 14243-2 - MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 2: GRANULATES AND POWDERS - METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES, INCLUDING FREE STEEL AND FREE TEXTILE CONTENT |
| UNE-EN ISO 16133:2011 | Soil quality - Guidance on the establishment and maintenance of monitoring programmes (ISO 16133:2004) |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| UNE-ISO 3534-4:2016 | Statistics -- Vocabulary and symbols -- Part 4: Survey sampling |
| ASTM E 2334 : 2009 : R2013 | Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample |
| CR 14539:2002 | Straight ammonium nitrate fertilizers - Comparative study on the determination of porosity (oil retention) |
| EN ISO 8199:2007 | Water quality - General guidance on the enumeration of micro-organisms by culture (ISO 8199:2005) |
| ISO 16740:2005 | Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide |
| UNE-ISO 2859-3:2014 | Sampling procedures for inspection by attributes. Part 3: Skip-lot sampling procedures |
| ASTM E 2764 : 2011 | Standard Practice for Uncertainty Assessment in the Context of Seized-Drug Analysis (Withdrawn 2020) |
| ISO 11843-6:2013 | Capability of detection Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
| ISO 17733:2015 | Workplace air Determination of mercury and inorganic mercury compounds Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| ISO 11462-2:2010 | Guidelines for implementation of statistical process control (SPC) — Part 2: Catalogue of tools and techniques |
| IWA 6:2008 | Guidelines for the management of drinking water utilities under crisis conditions |
| ISO 16331-1:2017 | Optics and optical instruments — Laboratory procedures for testing surveying and construction instruments — Part 1: Performance of handheld laser distance meters |
| ISO 25337:2010 | Plastics Production quality control Statistical method for using single measurements |
| ISO 18602:2013 | Packaging and the environment — Optimization of the packaging system |
| CEN ISO/TS 17444-2:2017 | Electronic fee collection - Charging performance - Part 2: Examination framework (ISO/TS 17444-2:2017) |
| ISO 19146:2010 | Geographic information Cross-domain vocabularies |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| I.S. CEN TS 15568:2006 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - SAMPLING STRATEGIES |
| IEC 60706-6:1994 | Guide on maintainability of equipment - Part 6: Section 9: Statistical methods in maintainability evaluation |
| I.S. EN 61358:1997 | ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| ISO/TR 8550-3:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 3: Sampling by variables |
| S.R. CEN ISO/TS 16181:2011 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - DETERMINATION OF PHTHALATES IN FOOTWEAR MATERIALS |
| DIN EN ISO 17511:2003-11 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| I.S. EN 60731:2012 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY (IEC 60731:2011 (EQV)) |
| ISO 2859-3:2005 | Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures |
| EN ISO 11132:2017 | Sensory analysis - Methodology - Guidelines for monitoring the performance of a quantitative sensory panel (ISO 11132:2012) |
| DIN EN 838:2010-05 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| DIN EN 451-1:2015-07 (Draft) | METHOD OF TESTING FLY ASH - PART 1: DETERMINATION OF FREE CALCIUM OXIDE CONTENT |
| ISO 6107-2:2006 | Water quality Vocabulary Part 2: |
| BS EN 13528-2:2002 | Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods Specific requirements and test methods |
| BS EN 13263-1 : 2005 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| BS EN ISO 14126:1999 | Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction |
| BS EN 12258-2:2004 | Aluminium and aluminium alloys. Terms and definitions Chemical analysis |
| ISO 19952:2005 | Footwear Vocabulary |
| ISO 14111:1997 | Natural gas — Guidelines to traceability in analysis |
| BS EN 14242:2004 | Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectral analysis |
| BS EN ISO 772:2011 | Hydrometry. Vocabulary and symbols |
| BS EN 14899:2005 | Characterization of waste. Sampling of waste materials. Framework for the preparation and application of a sampling plan |
| BS EN 14662-5:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Diffusive sampling followed by solvent desorption and gas chromatography |
| ISO/TS 16491:2012 | Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests |
| IEC 60704-3:2006 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values |
| ISO 16140:2003 | Microbiology of food and animal feeding stuffs Protocol for the validation of alternative methods |
| BS EN ISO 527-4:1997 | Plastics. Determination of tensile properties Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| BS EN ISO 9339-2:1998 | Optics and optical instruments. Contact lenses. Determination of the thickness Hydrogel contact lenses |
| IEC 61331-2:2014 | Protective devices against diagnostic medical X-radiation - Part 2: Translucent protective plates |
| BS EN 12326-2:2011 | Slate and stone for discontinuous roofing and external cladding Methods of test for slate and carbonate slate |
| ISO 4120:2004 | Sensory analysis Methodology Triangle test |
| BS EN 14042:2003 | Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
| BS EN ISO 20988:2007 | Air quality. Guidelines for estimating measurement uncertainty |
| BS EN 14350-2:2004 | Child use and care articles. Drinking equipment Chemical requirements and test methods |
| BS EN ISO 17511:2003 | In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials |
| ISO 25378:2011 | Geometrical product specifications (GPS) Characteristics and conditions Definitions |
| BS EN ISO 16140 : 2003 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS |
| BS EN ISO 9337-2:2004 | Contact lenses. Determination of back vertex power Measurement of contact lenses immersed in saline |
| IEC 62502:2010 | Analysis techniques for dependability - Event tree analysis (ETA) |
| ISO 8655-1:2002 | Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations |
| IEC 61649:2008 | Weibull analysis |
| UNE-EN ISO 772:2012 | Hydrometry - Vocabulary and symbols (ISO 772:2011) |
| ISO 22174:2005 | Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — General requirements and definitions |
| ISO/TS 16181:2011 | Footwear Critical substances potentially present in footwear and footwear components Determination of phthalates in footwear materials |
| ISO 13053-2:2011 | Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques |
| ISO 17294-1:2004 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines |
| ISO 11876:2010 | Hardmetals Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders Flame atomic absorption spectrometric method |
| UNE-ISO 13053-2:2012 | Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques |
| ISO 8320-1:2003 | Contact lenses and contact lens care products Vocabulary Part 1: Contact lenses |
| UNE-EN 12326-1:2015 | Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate |
| ISO 5667-14:2014 | Water quality Sampling Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling |
| ISO 3126:2005 | Plastics piping systems Plastics components Determination of dimensions |
| ISO 15189:2012 | Medical laboratories — Requirements for quality and competence |
| BS EN 13416:2001 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Rules for sampling |
| ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
| ISO 772:1996 | Hydrometric determinations — Vocabulary and symbols |
| IEC 61703:2016 | Mathematical expressions for reliability, availability, maintainability and maintenance support terms |
| BS EN 14372:2004 | Child use and care articles. Cutlery and feeding utensils. Safety requirements and tests |
| BS EN ISO 10882-2:2000 | Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator\'s breathing zone Sampling of gases |
| BS EN ISO 19952:2006 | Footwear. Vocabulary |
| IEC 61358:1996 | Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (Classes 1 and 2) |
| BS EN ISO 21187:2005 | Milk. Quantitative determination of bacteriological quality. Guidance for establishing and verifying conversion relationship between routine method results and anchor method results |
| BS EN 13639:2017 | Determination of total organic carbon in limestone |
| BS EN 838:2010 | Workplace exposure. Procedures for measuring gases and vapours using diffusive samplers. Requirements and test methods |
| ISO 5555:2001 | Animal and vegetable fats and oils — Sampling |
| IEC 60672-2:1999 | Ceramic and glass insulating materials - Part 2: Methods of test |
| BS EN ISO 15839:2006 | Water quality. On-line sensors/analysing equipment for water. Specifications and performance tests |
| UNE-ISO 8587:2010 | Sensory analysis. Methodology. Ranking. |
| ISO 5080:1994 | Sisal agricultural twines |
| IEC 61674:2012 | Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| ISO 11132:2012 | Sensory analysis Methodology Guidelines for monitoring the performance of a quantitative sensory panel |
| UNE-EN 13850:2013 | Postal Services - Quality of Services - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail |
| BS EN ISO 3126:2005 | Plastics piping systems. Plastics components. Determination of dimensions |
| ISO 20988:2007 | Air quality Guidelines for estimating measurement uncertainty |
| BS EN ISO 15189:2012 | Medical laboratories. Requirements for quality and competence |
| BS EN 14662-2:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Pumped sampling followed by solvent desorption and gas chromatography |
| ISO 14126:1999 | Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
| BS EN ISO 5080:1999 | Sisal agricultural twines |
| ISO 21187:2004 | Milk Quantitative determination of bacteriological quality Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results |
| UNE-ISO 3951-2:2012 | Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| UNE-EN 12586:2008 | Child use and care articles - Soother holder - Safety requirements and test methods |
| ISO 16140-1:2016 | Microbiology of the food chain — Method validation — Part 1: Vocabulary |
| I.S. EN 1076:2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| EN 62502 : 2010 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA) |
| DIN EN 843-5:2007-03 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis |
| DIN EN ISO/IEC 17043:2010-05 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN 24006:1993 | Measurement of fluid flow in closed conduits - Vocabulary and symbols (ISO 4006:1991) |
| EN ISO 18453:2005 | Natural gas - Correlation between water content and water dew point (ISO 18453:2004) |
| EN ISO 9337-1 : 2000 | CONTACT LENSES - DETERMINATION OF BACK VERTEX POWER - PART 1: METHOD USING FOCIMETER WITH MANUAL FOCUSING |
| EN ISO 22174:2005 | Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - General requirements and definitions (ISO 22174:2005) |
| EN 14372:2004 | Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests |
| EN ISO 10012:2003 | Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
| EN ISO 3126:2005 | Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
| EN 14662-4:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography |
| EN 16622:2015 | Silica-calcium fume for concrete - Definitions, requirements and conformity criteria |
| EN ISO 14111:1999 | Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
| BS 600:2000 | A guide to the application of statistical methods to quality and standardization |
| EN ISO 10882-2:2000 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000) |
| EN ISO 19952:2005 | Footwear - Vocabulary (ISO 19952:2005) |
| ENV 12435 : 1999 | MEDICAL INFORMATICS - EXPRESSION OF RESULTS OF MEASUREMENTS IN HEALTH SCIENCES |
| EN ISO 15839:2006 | Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003) |
| EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN 14350-2:2004 | Child use and care articles - Drinking equipment - Part 2: Chemical requirements and tests |
| EN ISO 11876:2010 | Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) |
| EN 1465:2009 | Adhesives - Determination of tensile lap-shear strength of bonded assemblies |
| EN ISO 5667-14:2016 | Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014) |
| EN 14042:2003 | Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
| EN 14662-5:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography |
| EN 14662-2:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography |
| EN ISO 9337-2:2004 | Contact lenses - Determination of back vertex power - Part 2: Measurement of contact lenses immersed in saline (ISO 9337-2:2004) |
| EN 15777:2009 | Textiles - Test method for phthalates |
| EN 843-5:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis |
| EN ISO 25378:2011 | Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) |
| EN ISO 5080:1999 | Sisal agricultural twines (ISO 5080:1994) |
| EN 3004:1997 | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa (at ambient temperature)/650°C - Technical specification |
| EN ISO 8320-1 : 2003 | CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - VOCABULARY - PART 1: CONTACT LENSES |
| EN 451-1:2017 | Method of testing fly ash - Part 1: Determination of free calcium oxide content |
| EN 16339:2013 | Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
| EN ISO 20988:2007 | Air quality - Guidelines for estimating measurement uncertainty (ISO 20988:2007) |
| EN 14662-1:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography |
| EN 14508:2016 | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| EN 3043:2008 | Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification |
| EN 838:2010 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| UNI EN ISO 772 : 2011 | HYDROMETRY - VOCABULARY AND SYMBOLS |
| EN 14181:2014 | Stationary source emissions - Quality assurance of automated measuring systems |
| EN 13639:2017 | Determination of total organic carbon in limestone |
| EN ISO 9339-2 : 1998 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF THICKNESS - PART 2: HYDROGEL CONTACT LENSES |
| EN ISO 17294-1:2006 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| EN 14899:2005 | Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan |
| DIN EN 15777 E : 2009 | TEXTILES - TEST METHOD FOR PHTHALATES |
| UNE-EN ISO 14253-1:2015 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification (ISO 14253-1:2013) |
| I.S. EN ISO 286-1:2010/AC:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010) |
| CLC/TS 50625-3-1:2015 | Collection, logistics & treatment requirements for WEEE - Part 3-1: Specification for de-pollution - General |
| ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC |
| ISO/TR 16705:2016 | Statistical methods for implementation of Six Sigma Selected illustrations of contingency table analysis |
| BS ISO 7870-4:2011 | Control charts Cumulative sum charts |
| BS ISO 16269-4:2010 | Statistical interpretation of data Detection and treatment of outliers |
| CEN ISO/TS 16181:2011 | Footwear - Critical substances potentially present in footwear and footwear components - Determination of phthalates in footwear materials (ISO/TS 16181:2011) |
| BS ISO 29981:2010 | Milk products. Enumeration of presumptive bifidobacteria. Colony count technique at 37 °C |
| ISO 6935-2:2015 | Steel for the reinforcement of concrete Part 2: Ribbed bars |
| UNI ISO/TR 22514-4 : 2010 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 4: PROCESS CAPABILITY ESTIMATES AND PERFORMANCE MEASURES |
| ISO 15239:2005 | Solid mineral fuels — Evaluation of the measurement performance of on-line analysers |
| ISO 14385-1:2014 | Stationary source emissions — Greenhouse gases — Part 1: Calibration of automated measuring systems |
| 08/30147925 DC : DRAFT JAN 2008 | BS ISO 3082 - IRON ORES - SAMPLING AND SAMPLE PREPARATION PROCEDURES |
| UNI ISO 7870-1 : 2014 | CONTROL CHARTS - PART 1: GENERAL GUIDELINES |
| BS EN ISO/IEC 17043:2010 | Conformity assessment. General requirements for proficiency testing |
| UNE-EN 15442:2012 | Solid recovered fuels - Methods for sampling |
| OIML G 1-101 : 2008 | EVALUATION OF MEASUREMENT DATA - SUPPLEMENT 1 TO THE "GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT" - PROPAGATION OF DISTRIBUTIONS USING A MONTE CARLO METHOD |
| BS EN 15777:2009 | Textiles. Test methods for phthalates |
| DIN 53804-1:2002-04 | STATISTICAL EVALUATION - PART 1: CONTINUOUS CHARACTERISTICS |
| 17/30347908 DC : 0 | BS ISO 11929-2 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - PART 2: ADVANCED APPLICATIONS |
| 08/30166519 DC : DRAFT FEB 2008 | BS ISO 11929 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE CONFIDENCE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION |
| I.S. EN ISO 8320-1:2003 | CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - VOCABULARY - PART 1: CONTACT LENSES |
| 97/402028 DC : DRAFT FEB 1997 | BS ISO 11648-0 - STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIAL - PART 0: GENERAL INTRODUCTION |
| UNE-ISO 3534-2:2013 | Statistics -- Vocabulary and symbols -- Part 2: Applied statistics |
| PD 6644-1:1999 | Proficiency testing by interlaboratory comparisons Development and operation of proficiency testing schemes |
| UNE-EN ISO 11132:2017 | Sensory analysis - Methodology - Guidelines for monitoring the performance of a quantitative sensory panel (ISO 11132:2012) |
| ISO 19973-1:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 1: General procedures |
| BS ISO 8422:2006 | Sequential sampling plans for inspection by attributes |
| I.S. CEN TR 14547:2006 | SAMPLING SCHEMES FOR THIRD PARTY CONFORMITY ASSESSMENT OF FINENESS IN PRECIOUS METAL ARTICLES |
| 07/30167025 DC : 0 | BS EN 62058-11 - ELECTRICITY METERING EQUIPMENT (AC) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| ISO 8423:2008 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| BS IEC 61649:1997 | Procedures for goodness-of-fit tests, confidence intervals and lower confidence limits for Weibull distributed data |
| BS IEC 60050-101:1998 | International electrotechnical vocabulary Mathematics |
| ISO 11794:2017 | Copper, lead, zinc and nickel concentrates — Sampling of slurries |
| UNI ISO 3951-1 : 2014 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
| 14/30258987 DC : 0 | BS ISO 6935-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - PART 2: RIBBED BARS |
| ASTM D 7948 : 2014 | Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry |
| ISO 29201:2012 | Water quality — The variability of test results and the uncertainty of measurement of microbiological enumeration methods |
| BS ISO 10725:2000 | Acceptance sampling plans and procedures for the inspection of bulk materials |
| 12/30259213 DC : 0 | BS EN 14181 - STATIONARY SOURCE EMISSIONS - QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS |
| DIN EN ISO 18113-1:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| UNI ISO 22514-2 : 2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 2: PROCESS CAPABILITY AND PERFORMANCE OF TIME-DEPENDENT PROCESS MODELS |
| ISO 11843-1:1997 | Capability of detection — Part 1: Terms and definitions |
| BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
| 07/30154336 DC : 0 | BS ISO 25378 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SPECIFICATION - CHARACTERISTICS AND CONDITIONS |
| DD ENV 13459-3:1999 | Road marking. Materials. Quality control Performance in use |
| 11/30239628 DC : 0 | BS ISO 18602 - PACKAGING AND THE ENVIRONMENT - OPTIMIZATION OF THE PACKAGING SYSTEM |
| 07/30126052 DC : 0 | BS ISO 22514-1 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS |
| ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
| BS EN 61703:2016 | Mathematical expressions for reliability, availability, maintainability and maintenance support terms |
| DD CEN/TS 15511:2008 | Postal services. Quality of service. Information available on postal services |
| BS ISO 15239:2005 | Solid mineral fuels. Evaluation of the measurement performance of on-line analysers |
| BS 3156-11.0.3(1997) : 1997 AMD 10655 | ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS |
| 10/30208983 DC : 0 | BS ISO 13053-2 - QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
| 16/30288734 DC : 0 | BS ISO 19087 - WORKPLACE AIR - ANALYSIS OF RESPIRABLE CRYSTALLINE SILICA BY FOURIER-TRANSFORM INFRARED SPECTROSCOPY |
| 07/30164027 DC : 0 | BS ISO 23909 - SOIL QUALITY - PREPARATION OF LABORATORY SAMPLES FROM LARGE SAMPLES |
| ONORM EN ISO 21187 : 2005 | MILK - QUANTITATIVE DETERMINATION OF BACTERIOLOGICAL QUALITY - GUIDANCE FOR ESTABLISHING AND VERIFYING A CONVERSION RELATIONSHIP BETWEEN ROUTINE METHOD RESULTS AND ANCHOR METHOD RESULTS |
| BS ISO 7870-5:2014 | Control charts Specialized control charts |
| 08/30165924 DC : DRAFT JAN 2008 | BS ISO 24095 - WORKPLACE AIR - GUIDANCE FOR THE MEASUREMENT OF RESPIRABLE CRYSTALLINE SILICA |
| DIN ISO 17123-4:2016-02 (Draft) | OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 4: ELECTRO-OPTICAL DISTANCE METERS (EDM MEASUREMENTS TO REFLECTORS) (ISO 17123-4:2012) |
| 03/312775 DC : DRAFT AUG 2003 | ISO 8587 - SENSORY ANALYSIS - METHODOLOGY - RANKING |
| 03/309700 DC : DRAFT JULY 2003 | BS ISO 8199 - WATER QUALITY - GUIDE TO THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
| DIN EN ISO 15112 E : 2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| 99/715416 DC : DRAFT NOV 99 | ISO 16140 - MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS |
| 12/30058092 DC : 0 | BS ISO 7870-5 - CONTROL CHARTS - PART 5: SPECIALIZED CONTROL CHARTS |
| BS 6068-6.14:1998 | Water quality. Sampling Guidance on quality assurance of environmental water sampling and handling |
| UNI EN 16339 : 2013 | AMBIENT AIR - METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE BY DIFFUSIVE SAMPLING |
| DD ISO/TS 21749:2005 | Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments |
| BS IEC 61124:1997 | Reliability testing. Compliance tests for constant failure rate and constant failure intensity |
| 07/30171415 DC : 0 | BS ISO 22118 - MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - POLYMERASE CHAIN REACTION (PCR) FOR THE DETECTION OF FOOD-BORNE PATHOGENS - PERFORMANCE CHARACTERISTICS OF MOLECULAR DETECTION METHODS |
| ASTM E 2548 : 2016 : REDLINE | Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis |
| PD CR 13695-1:2000 | Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment Requirements for measuring and verifying the four heavy metals present in packaging |
| NF EN 60672-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| DIN ISO 8243:2015-12 | CIGARETTES - SAMPLING (ISO 8243:2013) |
| NF EN ISO 11876 : 2010 | HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC CONTENTS IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| BS ISO 8196-2:2009 | Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis Calibration and quality control in the dairy laboratory |
| BS ISO 19983:2017 | Rubber. Determination of precision of test methods |
| ISO 18453:2004 | Natural gas — Correlation between water content and water dew point |
| ISO 16269-4:2010 | Statistical interpretation of data Part 4: Detection and treatment of outliers |
| ISO 13474:2009 | Acoustics Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment |
| BS ISO 13320:2009 | Particle size analysis. Laser diffraction methods |
| 12/30247157 DC : 0 | BS ISO 14532 - NATURAL GAS - VOCABULARY |
| BIS IS 15037 : 2011 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - RELIABILITY BLOCK DIAGRAM AND BOOLEAN METHODS |
| BIS IS 16174 : 2014 | ACCEPTANCE SAMPLING PLANS AND PROCEDURES FOR THE INSPECTION OF BULK MATERIALS |
| 02/712190 DC : DRAFT DEC 2002 | ISO 24276 - FOODSTUFFS - NUCLEIC ACID BASED METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - GENERAL REQUIREMENTS AND DEFINITIONS |
| BS ISO 22514-3:2008 | Statistical methods in process management. Capability and performance Machine performance studies for measured data on discrete parts |
| ASTM D 6785 : 2013 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| CEI UNI EN ISO/IEC 17043 : 2011 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| 09/30202012 DC : 0 | BS EN 15442 - SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
| BS EN 60672-2:2000 | Ceramic and glass insulating materials Methods of test |
| 04/30115151 DC : DRAFT JUNE 2004 | ISO/IEC 16085 - SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| 10/30227411 DC : 0 | BS EN 12326-2 - SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 2: METHODS OF TEST FOR SLATE AND CARBONATE SLATE |
| 03/102285 DC : DRAFT SEP 2003 | BS ISO 21247 - QUALITY PLANS FOR PRODUCT ACCEPTANCE - COMBINED ACCEPT-ZERO AND CONTROL PROCEDURES |
| PD ISO GUIDE 33:2015 | Reference materials. Good practice in using reference materials |
| DIN ISO 5667-14 E : 2013 | WATER QUALITY - SAMPLING - PART 14: GUIDANCE ON QUALITY ASSURANCE OF ENVIRONMENTAL WATER SAMPLING AND HANDLING (ISO 5667-14:1998) |
| PD ISO/TR 18336:2016 | Guidelines for good XRF laboratory practice for the iron ore industry |
| PREN 12326-2 : DRAFT 2010 | SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 2: METHODS OF TEST FOR SLATE AND CARBONATE SLATE |
| BS 6002-5(2011) : 2011 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PROCEDURES FOR ASSESSMENT OF DECLARED QUALITY LEVELS |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| BS ISO 22514-4:2016 | Statistical methods in process management. Capability and performance Process capability estimates and performance measures |
| 03/102177 DC : DRAFT OCT 2003 | BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF A STATISTICAL TOLERANCE INTERVAL |
| BS ISO 17733:2004 | Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| 16/30344611 DC : 0 | BS ISO 7870-1 - CONTROL CHARTS - PART 1: GENERAL GUIDELINES |
| BS ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| 17/30349157 DC : 0 | BS ISO 8559-3 - SIZE DESIGNATION OF CLOTHES - PART 3: METHODOLOGY OF THE CREATION OF THE BODY MEASUREMENT TABLES AND INTERVALS |
| BS ISO/IEC 10164-13:1995 | Information technology. Open systems interconnection. Systems management Summarization function |
| ISO/TS 20612:2007 | Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories |
| BS ISO 11843-7:2012 | Capability of detection Methodology based on stochastic properties of instrumental noise |
| BS ISO 11843-5 : 2008 | CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| 08/30177160 DC : DRAFT JAN 2008 | BS ISO 29981 - MILK PRODUCTS - ENUMERATION OF PRESUMPTIVE BIFIDOBACTERIA - COLONY COUNT TECHNIQUE AT 37 DEGREES C |
| 00/565675 DC : DRAFT DEC 2000 | BS EN ISO 17511 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
| CEI 56-28 : 2000 | GUIDE ON MAINTAINABILITY OF EQUIPMENT - PART 6: SECTION 9: STATISTICAL METHODS IN MAINTAINABILITY EVALUATION |
| DIN EN ISO 18453:2006-01 | Natural gas - Correlation between water content and water dew point (ISO 18453:2004) |
| ISO 10835:2007 | Direct reduced iron and hot briquetted iron Sampling and sample preparation |
| DIN 1319-4:1999-02 | FUNDAMENTALS OF METROLOGY - PART 4: EVALUATION OF MEASUREMENTS - UNCERTAINTY OF MEASUREMENT |
| UNI ISO/TR 8550-1 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 1: ACCEPTANCE SAMPLING |
| XP T47 759 : 2009 XP | END OF LIFE TYRES (ELT) - SAMPLING OF PRODUCTS FROM PRIMARY SHREDDING - SCENARIO PILE BEING MOVED |
| ARSP-2 VOL 1 : 2015 | GUIDANCE ON THE DEVELOPMENT OF WEAPON DANGER AREAS/ZONES - PROBABILISTIC METHODOLOGY - GENERAL PRINCIPALS |
| UNI ISO 7870-5 : 2014 | CONTROL CHARTS - PART 5: SPECIALIZED CONTROL CHARTS |
| I.S. ISO GUIDE 73:2009 | RISK MANAGEMENT - VOCABULARY |
| CEN/TS 15511:2008 | Postal services - Quality of service - Information available on postal services |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| S.R. CEN ISO/TS 17444-2:2017 | ELECTRONIC FEE COLLECTION - CHARGING PERFORMANCE - PART 2: EXAMINATION FRAMEWORK (ISO/TS 17444-2:2017) |
| 18/30346454 DC : 0 | BS ISO 21832 - WORKPLACE AIR - PROCEDURES FOR DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICLES |
| ISO/TS 19036:2006 | Microbiology of food and animal feeding stuffs Guidelines for the estimation of measurement uncertainty for quantitative determinations |
| ISO 3951-4:2011 | Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels |
| I.S. EN 15777:2009 | TEXTILES - TEST METHOD FOR PHTHALATES |
| I.S. EN 3043:2008 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 900 MPA/650 DEGREES C, MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| ISO 28591:2017 | Sequential sampling plans for inspection by attributes |
| UNI EN ISO 15112 : 2014 | NATURAL GAS - ENERGY DETERMINATION |
| UNI ISO 11843-7 : 2014 | CAPABILITY OF DETECTION - PART 7: METHODOLOGY BASED ON STOCHASTIC PROPERTIES OF INSTRUMENTAL NOISE |
| ISO/TR 22514-4:2007 | Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
| CEI EN 61703 : 2002 | MATHEMATICAL EXPRESSIONS FOR RELIABILITY, AVAILABILITY, MAINTAINABILITY AND MAINTENANCE SUPPORT TERMS |
| ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| CEI EN 61649 : 2010 | WEIBULL ANALYSIS |
| ISO 16258-1:2015 | Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 1: Direct-on-filter method |
| ISO 8518:2001 | Workplace air — Determination of particulate lead and lead compounds — Flame or electrothermal atomic absorption spectrometric method |
| I.S. EN 60672-2:2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| NF EN 61373 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS |
| ISO 8196-2:2009 | Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 2: Calibration and quality control in the dairy laboratory |
| S.R. CEN TS 14243:2010 | MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
| SAE J2995_201703 | Strength and Durability Testing for Automotive Hydraulic Brake Components |
| ISO/TR 13587:2012 | Three statistical approaches for the assessment and interpretation of measurement uncertainty |
| CEN/TR 10345:2013 | Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods |
| ISO 8196-3:2009 | Milk Definition and evaluation of the overall accuracy of alternative methods of milk analysis Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis |
| ISO/TR 9272:2005 | Rubber and rubber products Determination of precision for test method standards |
| ISO 2859-10:2006 | Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| UNE-CEN ISO/TS 16181:2011 EX | Footwear - Critical substances potentially present in footwear and footwear components - Determination of phthalates in footwear materials (ISO/TS 16181:2011) |
| NF EN 3043 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 900 MPA/650 DEGREES C, MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| 17/30365071 DC : 0 | BS EN 14243-1 - MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 1: GENERAL DEFINITIONS RELATED TO THE METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
| UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| ISO 22514-1:2014 | Statistical methods in process management — Capability and performance — Part 1: General principles and concepts |
| DIN EN ISO 19146:2011-02 | GEOGRAPHIC INFORMATION - CROSS-DOMAIN VOCABULARIES |
| UNI EN ISO 10399 : 2010 | SENSORY ANALYSIS - METHODOLOGY - DUO-TRIO TEST |
| CEI EN 60704-3 : 2007 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 3: PROCEDURE FOR DETERMINING AND VERIFYING DECLARED NOISE EMISSION VALUES |
| PREN ISO 15197 : DRAFT 2011 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| EN ISO 13843:2017 | Water quality - Requirements for establishing performance characteristics of quantitative microbiological methods (ISO 13843:2017) |
| ISO 16336:2014 | Applications of statistical and related methods to new technology and product development process — Robust parameter design (RPD) |
| ISO 19157:2013 | Geographic information — Data quality |
| EN ISO 15195:2003 | Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003) |
| ISO 26323:2009 | Milk products — Determination of the acidification activity of dairy cultures by continuous pH measurement (CpH) |
| ISO 5479:1997 | Statistical interpretation of data — Tests for departure from the normal distribution |
| ISO 14511:2001 | Measurement of fluid flow in closed conduits Thermal mass flowmeters |
| IEC 60300-3-5:2001 | Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles |
| ISO 16133:2004 | Soil quality Guidance on the establishment and maintenance of monitoring programmes |
| ISO 7870-4:2011 | Control charts Part 4: Cumulative sum charts |
| I.S. EN ISO 4120:2007 | SENSORY ANALYSIS - METHODOLOGY - TRIANGLE TEST |
| I.S. EN ISO 18453:2005 | NATURAL GAS - CORRELATION BETWEEN WATER CONTENT AND WATER DEW POINT |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO/TR 13195:2015 | Selected illustrations of response surface method Central composite design |
| I.S. EN 15357:2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| I.S. CEN TS 15357:2006 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| ISO 8588:2017 | Sensory analysis — Methodology — "A" - "not A" test |
| ISO 11074:2015 | Soil quality — Vocabulary |
| ISO 14698-2:2003 | Cleanrooms and associated controlled environments Biocontamination control Part 2: Evaluation and interpretation of biocontamination data |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| BS EN 14583:2004 | Workplace atmospheres. Volumetric bioaerosol sampling devices. Requirements and test methods |
| BS EN 14136:2004 | Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures |
| ISO 9337-2:2004 | Contact lenses Determination of back vertex power Part 2: Measurement of contact lenses immersed in saline |
| BS EN ISO 5555 : 2002 | ANIMAL AND VEGETABLE FATS AND OILS - SAMPLING |
| BS EN ISO 10012:2003 | Measurement management systems. Requirements for measurement processes and measuring equipment |
| ISO 17534-1:2015 | Acoustics Software for the calculation of sound outdoors Part 1: Quality requirements and quality assurance |
| BS EN 13850:2012 | Postal Services. Quality of Services. Measurement of the transit time of end-to-end services for single piece priority mail and first class mail |
| IEC 60068-3-11:2007 | Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers |
| BS EN 13205:2002 | Workplace atmospheres. Assessment of performance of instruments for measurement of airborne particle concentrations |
| ISO/TS 22117:2010 | Microbiology of food and animal feeding stuffs Specific requirements and guidance for proficiency testing by interlaboratory comparison |
| ISO 9919:2005 | Medical electrical equipment Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use |
| ISO 9337-1:1999 | Contact lenses Determination of back vertex power Part 1: Method using focimeter with manual focusing |
| ISO 10882-2:2000 | Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 2: Sampling of gases |
| BS EN ISO 22174:2005 | Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. General requirements and definitions |
| BS 6001-1(1999) : 1999 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| CEN/TS 15568:2006 | Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Sampling strategies |
| CEN/TR 15310-2:2006 | Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques |
| EN 13528-1:2002 | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements |
| DIN EN 14662-4:2005-08 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 4: DIFFUSIVE SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY |
| EN ISO 527-5:2009 | Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009) |
| DIN EN 14136:2004-08 | Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures |
| DIN ISO 4120:2005-04 | SENSORY ANALYSIS - METHODOLOGY - TRIANGLE TEST |
| EN 12326-2:2011 | Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate |
| DIN EN 14662-1:2005-08 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography |
| DIN EN ISO 15839:2007-02 | Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003) |
| I.S. EN ISO 527-4:1997 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
| CEN/TR 16220:2011 | Construction products - Assessment of release of dangerous substances - Complement to sampling |
| DIN EN ISO 14698-2:2004-02 | Cleanrooms and associated controlled environments - Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data (ISO 14698-2:2003) |
| DIN EN ISO 5495:2016-10 | Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 + Cor 1:2006 + Amd 1:2016) (includes Amendment :2016) |
| EN 62058-11:2010 | Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods |
| DIN EN 14583:2004-12 | Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods |
| CEN/TS 14773:2004 | Postal services - Quality of service - Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters |
| CEN ISO/TS 22117:2010 | Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010) |
| DIN EN ISO 20988:2007-09 | AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY |
| DIN EN 15777:2009-12 | TEXTILES - TEST METHOD FOR PHTHALATES |
| EN 12435:2006 | Health informatics - Expression of results of measurements in health sciences |
| DIN EN 14726:2005-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| EN ISO 527-4:1997 | Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997) |
| EN 12697-38:2004 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
| BS 6001-4:2005 | Sampling procedures for inspection by attributes System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| EN 60672-2:2000 | Ceramic and glass insulating materials - Part 2: Methods of test |
| EN 61674:2013 | Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| EN 60704-3:2006 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values |
| UNI EN ISO 527-5 : 2009 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 5: TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES |
| DIN EN 14662-5:2005-08 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 5: DIFFUSIVE SAMPLING FOLLOWED BY SOLVENT DESORPTION AND GAS CHROMATOGRAPHY |
| I.S. EN 14583:2004 | WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS |
| EN ISO 4120:2007 | Sensory analysis - Methodology - Triangle test (ISO 4120:2004) |
| DIN EN ISO 15195:2004-01 | LABORATORY MEDICINE - REQUIREMENTS FOR REFERENCE MEASUREMENT LABORATORIES |
| DIN EN ISO 3126:2005-05 | Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
| DIN EN ISO 527-5:2010-01 | Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009) |
| EN 60068-3-11:2007 | Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers |
| DIN EN ISO 9337-2:2004-11 | CONTACT LENSES - DETERMINATION OF BACK VERTEX POWER - PART 2: MEASUREMENT OF CONTACT LENSES IMMERSED IN SALINE |
| DIN EN 14662-2:2005-08 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 2:PUMPED SAMPLING FOLLOWED BY SOLVENT DESORPTION AND GAS CHROMATOGRAPHY |
| EN 61703:2016 | Mathematical expressions for reliability, availability, maintainability and maintenance support terms |
| EN 60731:2012 | Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy |
| EN 61331-2:2014 | Protective devices against diagnostic medical X-radiation - Part 2: Translucent protective plates |
| DIN EN 14042:2003-07 | WORKPLACE ATMOSPHERES - GUIDE FOR THE APPLICATION AND USE OF PROCEDURES FOR THE ASSESSMENT OF EXPOSURE TO CHEMICAL AND BIOLOGICAL AGENTS |
| EN 14583:2004 | Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods |
| CSA ISO/IEC 10164-11 : 1997 : R2001 : FR | INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEM MANAGEMENT: METRIC OBJECTS AND ATTRIBUTES |
| I.S. EN ISO 17294-1:2006 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
| CSA ISO 10012 : 2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| CSA ISO/IEC 10164-11 : 1997 : INC : AMD 1 : 2006 : R2010 | INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEM MANAGEMENT: METRIC OBJECTS AND ATTRIBUTES |
| CSA ISO/IEC 10164-11 : 1997 : R2010 | INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEM MANAGEMENT: METRIC OBJECTS AND ATTRIBUTES |
| CSA ISO/IEC 10164-11 : 1997 | INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEM MANAGEMENT: METRIC OBJECTS AND ATTRIBUTES |
| I.S. EN ISO 22174:2005 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - POLYMERASE CHAIN REACTION (PCR) FOR THE DETECTION OF FOOD-BORNE PATHOGENS - GENERAL REQUIREMENTS AND DEFINITIONS |
| CSA ISO/IEC 10164-11 : 1997 : INC : AMD 1 : 2006 | INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEM MANAGEMENT: METRIC OBJECTS AND ATTRIBUTES |
| CEI UNI EN ISO/IEC 17043:2024-05 | Conformity assessment General requirements for the competence of proficiency testing providers |
| I.S. EN 14662-1:2005 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 1: PUMPED SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY |
| I.S. EN ISO 10882-2:2000 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 2: SAMPLING OF GASES |
| CAN/CSA-ISO/IEC 10164-11A-97 (R2015) | Amendment 1:2006 to CAN/CSA-ISO/IEC 10164-11-97, Information Technology - Open Systems Interconnection - Systems Management: Metric Objects and Attributes - Amendment 1: Implementation Conformance Statement Proformas (Adopted Amendment 1:1998 to ISO/IEC 10164-11:1994) |
| CSA ISO 10012 : 2003 : R2013 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| ISO 31-11:1992 | Quantities and units Part 11: Mathematical signs and symbols for use in the physical sciences and technology |
| AS/NZS IEC 61703:2020 | Mathematical expressions for reliability, availability, maintainability and maintenance support terms |
| AS/NZS IEC 61649:2020 | Weibull analysis |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| AS/NZS ISO 19146:2019 | Geographic information - Cross‑domain vocabularies |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.