EN 1050 : 1996
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
Superseded date
01-09-2007
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
Foreword
0 Introduction
1 Scope
2 Normative references
3 Definitions
4 General principles
4.1 Basic concept
4.2 Information for risk assessment
5 Determination of the limits of machinery
6 Hazard identification
7 Risk estimation
7.1 General
7.2 Elements of risk
7.3 Aspects to be considered when establishing
elements of risk
8 Risk evaluation
8.1 General
8.2 Achievement of risk reduction objectives
8.3 Comparison of risks
9 Documentation
Annex A (informative) Examples of hazards, hazardous situations
and hazardous events
Annex B (informative) Methods for analysing hazards and
estimating risk
Annex C (informative) Bibliography
Describes general principles for risk assessment procedure, where the knowledge and experience of the design, use, incidents, accidents and harm pertaining to the machinery is brought together so as to assess the risks during all phases of the life of the machinery.
| Committee |
TC 114
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| BS EN 1050:1997 | Identical |
| PN EN 1050 : 1999 | Identical |
| DIN EN 1050:1997-01 | Identical |
| I.S. EN 1050:1997 | Identical |
| NS EN 1050 : 1ED 1996 | Identical |
| NEN EN 1050 : 1997 | Identical |
| NF EN 1050 : 1997 | Identical |
| NBN EN 1050 : 1997 | Identical |
| SN EN 1050 : 1997 | Identical |
| UNI EN 1050 : 1998 | Identical |
| UNE-EN 1050:1997 | Identical |
| 99/541173 DC : DRAFT OCT 1999 | BS EN 13731 - SPECIFICATION FOR LIFTING BAGS FOR FIRE AND RESCUE SERVICE USE |
| UNI EN 12385-3 : 2008 | STEEL WIRE ROPES - SAFETY - PART 3: INFORMATION FOR USE AND MAINTENANCE |
| 04/101637 DC : DRAFT JAN 2004 | ISO 19353 - SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
| 03/302919 DC : DRAFT SEP 2003 | EN 12312 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS |
| I.S. EN 12312-8:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS |
| 09/30206358 DC : DRAFT SEP 2009 | BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| BS EN 1501-3:2008 | Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles |
| 00/702570 DC : DRAFT JAN 2000 | ISO/CD 3691-5 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: MANUALLY PROPELLED TRUCKS |
| 06/30156314 DC : 0 | BS EN 13120 - INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 12415:2000 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| 02/711111 DC : DRAFT SEP 2002 | PREN 415-7 - PACKAGING MACHINES SAFETY - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| 04/30115525 DC : DRAFT JUN 2004 | PREN 12312-14 - AIRCRAFT GROUND SUPPORT EQUIPMENT - PART 14: DISABLED INCAPACITATED PASSENGER BOARDING EQUIPMENT |
| 03/300531 DC : DRAFT FEB 2003 | EN 614-1 - SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| 03/119040 DC : DRAFT NOV 2003 | PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS ISO 22559-1:2014 | Safety requirements for lifts (elevators) Global essential safety requirements (GESRs) |
| 02/540559 DC : DRAFT JULY 2002 | EN 14466 - FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| 12/30264755 DC : 0 | BS ISO 22559-1 - SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS) |
| DIN EN 14958:2010-10 | Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements (includes Amendment A1:2009) |
| 14/30293557 DC : 0 | BS EN 12312-12 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 12: POTABLE WATER SERVICE EQUIPMENT |
| 05/30117627 DC : DRAFT JUNE 2005 | BS ISO 11228-3 - ERGONOMICS - MANUAL HANDLING - PART 3: HANDLING OF LOW LOADS AT HIGH FREQUENCY |
| 03/306044 DC : DRAFT APR 2003 | BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| 14/30299187 DC : 0 | BS EN 12312-6 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT |
| I.S. EN 13128:2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| PD CR 954-100:1999 | Safety of machinery. Safety-related parts of control systems Guide on the use and application of EN 954-1:1996 |
| 03/313810 DC : 0 | EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
| 05/30134150 DC : DRAFT MAY 2005 | EN 15233 - METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES |
| 14/30293560 DC : 0 | BS EN 12312-13 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 13: LAVATORY SERVICE EQUIPMENT |
| I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| 00/706811 DC : DRAFT MAR 2000 | BS EN 13870 - FOOD PROCESSING MACHINERY - CHOP CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 05/30130669 DC : DRAFT MAR 2005 | BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 02/709474 DC : DRAFT JULY 2002 | BS EN 1760-3 - SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| 02/561276 DC : DRAFT MAR 2002 | BS 1005-4 - SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| PD CEN/TR 14489:2005 | Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment |
| 03/114108 DC : DRAFT AUG 2003 | EN 14655 - FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| 09/30197984 DC : 0 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| BS EN 14753:2007 | Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel |
| 09/30181670 DC : 0 | BS EN 13035-7:2006/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS |
| 99/711929 DC : DRAFT JUL 1999 | EN 13621 - FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| 09/30187535 DC : 0 | BS EN 13000 - CRANES - MOBILE CRANES |
| 04/30111616 DC : 0 | EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| 04/30115503 DC : DRAFT JUN 2004 | EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| CSA ISO/TS 22559-1:2007 | SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS) |
| CSA ISO/TS 22559-1 : 2007 : R2016 | SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS) |
| EN 13411-7:2006+A1:2008 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
| I.S. EN 12649:2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| I.S. EN 15061:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| GOST R EN 818-5 : 2005 | SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS OF GRADE 4 |
| NF EN 1175-1 : 1998 + A1 2011 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| DIN EN 1672-2:2009-07 | Food processing machinery - Basic concepts - Part 2: Hygiene requirements (includes Amendment A1:2009) |
| DIN EN 1804-3:2010-05 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems (includes Amendment A1:2010) |
| BS EN 13120 : 2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 1552:2003-09 | UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS |
| DIN EN 13135-1:2011-04 | CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT |
| DIN EN 415-7:2009-12 | Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008) |
| DIN EN 415-5:2010-04 | Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009) |
| DIN EN 12198-1:2008-11 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| DIN EN 13355:2010-06 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| DIN EN 1010-3:2010-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines (includes Amendment A1:2009) |
| DIN EN 1005-5:2007-05 | Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency |
| DIN EN 500-1:2010-05 | Mobile road construction machinery - Safety - Part 1: Common requirements (includes Amendment A1:2009) |
| DIN EN 12921-4:2010-06 | Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents (includes Amendment A1:2008) |
| DIN EN 12385-1:2009-01 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 14466 : 2005 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| BS EN 13731:2007 | Lifting bag systems for fire and rescue service use. Safety and peformance requirements |
| BS EN 894-3 : 2000 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| BS EN 12855 : 2003 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 818-3 : 1999 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
| BS EN 13414-2 : 2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| BS EN 12984 : 2005 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13128 : 2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| BS EN 1005-4 : 2005 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| BS EN 1492-4 : 2004 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| BS EN 12075:1997 | Biotechnology. Large scale process and production. Procedures for fermentation and downstream processes |
| BS EN 12321 : 2003 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| BS EN 12312-18 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS |
| BS EN 1834-3:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable dust atmospheres |
| BS EN 954-1:1997 | Safety of machinery. Safety related parts of control systems General principles for design |
| BS EN 12385-7:2002 | Steel wire ropes. Safety Locked coil ropes for mine shafts |
| BS EN 13000 : 2010 | CRANES - MOBILE CRANES |
| BS EN 1035:1999 | Tannery machines. Moving platen machinery. Safety requirements |
| BS EN 14373:2005 | Explosion suppression systems |
| BS EN 12629-7 : 2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS |
| BS EN 12635 : 2002 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - INSTALLATION AND USE |
| BS EN 13411-2 : 2001 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 2: SPLICING OF EYES FOR WIRE ROPE SLINGS |
| BS EN 12198-3 : 2002 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING |
| BS EN 12921-1 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| BS EN 13414-3 : 2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 3: GROMMETS AND CABLE-LAID SLINGS |
| EN 1672-2:2005+A1:2009 | Food processing machinery - Basic concepts - Part 2: Hygiene requirements |
| I.S. EN 12312-13:2017 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 13: LAVATORY SERVICE EQUIPMENT |
| I.S. EN 14985:2012 | CRANES - SLEWING JIB CRANES |
| I.S. EN 13414-2:2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| I.S. EN 12921-4:2005 | MACHINES FOR SURFACE CLEANING AND PRETREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS AND VAPOURS - PART 4: SAFETY OF MACHINES USING HALOGENATED SOLVENTS |
| I.S. EN 12629-5-3:2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-3: PIPE PRESTRESSING MACHINES |
| I.S. EN 14010:2004 | |
| DIN EN 1570:1998-08 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| DIN EN 13411-5:2009-02 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
| EN 50374:2004 | Conductor cars |
| DIN EN 818-1:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE |
| DIN EN 13414-2:2009-02 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| DIN EN 12312-4:2003-09 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 4: PASSENGER BOARDING BRIDGES |
| EN 1034-5:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
| EN 12198-3:2002+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
| DIN EN 13731:2008-02 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
| DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| DIN EN 13414-1:2009-02 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| DIN EN 12312-5:2009-08 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (includes Amendment A1:2009) |
| EN 1010-5:2005 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board |
| EN 12312-11:2005 | Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers |
| EN 12355:2003+A1:2010 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements |
| DIN EN 12312-3:2009-08 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 3: CONVEYOR BELT VEHICLES |
| EN 13411-5:2003+A1:2008 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
| EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
| DIN EN 81-2:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| EN 12629-5-3:2003+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines |
| EN 13411-1:2002+A1:2008 | Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
| EN 1034-6:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender |
| EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
| EN 13202 : 2000 | ERGONOMICS OF THE THERMAL ENVIRONMENT - TEMPERATURES OF TOUCHABLE HOT SURFACES - GUIDANCE FOR ESTABLISHING SURFACE TEMPERATURE LIMIT VALUES IN PRODUCT STANDARDS WITH THE AID OF EN 563 |
| CR 954-100:1999 | Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996 |
| EN 1175-2:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
| EN 12312-19:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
| EN 12462:1998 | Biotechnology - Performance criteria for pumps |
| EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
| EN 13414-1:2003+A2:2008 | Steel wire rope slings - Safety - Part 1: Slings for general lifting service |
| EN 12717:2001+A1:2009 | Safety of machine tools - Drilling machines |
| EN 14373:2005 | Explosion suppression systems |
| EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
| EN 13135-2:2004+A1:2010 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| UNI EN 13411-7 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
| EN 12312-10:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| EN 12267:2003+A1:2010 | Food processing machinery - Circular saw machines - Safety and hygiene requirements |
| EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
| DIN EN 13414-3:2009-02 | Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings (includes Corrigendum AC:2004 and Amendment A1:2008) |
| EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
| EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
| EN 1010-4:2004+A1:2009 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
| UNI EN 415-3 : 2010 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| EN 12478:2000/AC:2001 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| EN 12921-1:2005+A1:2010 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
| EN 12215:2004+A1:2009 | Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
| EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
| EN 12757-1:2005+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| EN 12312-18:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units |
| EN 13411-2:2001+A1:2008 | Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings |
| EN 12629-5-1:2003+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis |
| EN 13355:2004+A1:2009 | Coating plants - Combined booths - Safety requirements |
| EN 12921-4:2005+A1:2008 | Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents |
| EN 12505:2000+A1:2009 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
| EN 12649:2008+A1:2011 | Concrete compactors and smoothing machines - Safety |
| EN 12385-9:2002 | Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
| EN 1034-7:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests |
| EN 1005-5:2007 | Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency |
| EN 1010-3:2002+A1:2009 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines |
| EN 12855:2003+A1:2010 | Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements |
| EN 1034-2:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums |
| EN 12629-5-4:2003+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines |
| EN 12075:1997 | Biotechnology - Large-scale process and production - Procedures for fermentation and downstream processes |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 999:1998-12 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| ONORM EN 1756-1 : 2008 | TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS |
| DIN EN 13889:2009-02 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES, GRADE 6 - SAFETY |
| DIN EN 1501-3:2010-06 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
| UNI EN 13155 : 2009 | CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| I.S. EN 1492-1:2000 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| 03/109865 DC : DRAFT JULY 2003 | BS EN 415-6 - PACKAGING MACHINES SAFETY - PART 6: PALLET WRAPPING MACHINES |
| 11/30235004 DC : 0 | BS EN 13155 - CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS |
| UNE-EN 13684:2005 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
| 04/19993045 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| 08/30178810 DC : DRAFT MAY 2008 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| 03/306578 DC : DRAFT APR 2003 | EN 14658 - CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING |
| 14/30285286 DC : 0 | BS EN 14439 - CRANES - SAFETY - TOWER CRANES |
| 04/30106849 DC : DRAFT MAY 2004 | EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| I.S. EN 692:2005 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| 12/30265031 DC : 0 | BS EN 60825-12 ED.2 - SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
| 06/30156494 DC : 0 | BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONES - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| I.S. EN 1010-5:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD |
| 04/30115780 DC : DRAFT JUN 2004 | ISO 9355-3 - SAFETY OF MACHINERY - ERGONOMIC REQUIREMENTS FOR THE DESIGN OF SIGNALS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| 09/30198762 DC : 0 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| DD ISO/TS 22559-1:2004 | Safety requirements for lifts (elevators) Global safety requirements (GESR\'s) for lifts (elevators |
| CEI EN 50308 : 2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| PREN 14973 : DRAFT 2013 | CONVEYOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS |
| DIN EN 12312-8:2015-07 (Draft) | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS |
| 03/306593 DC : DRAFT APR 2003 | BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| 02/710618 DC : DRAFT SEP 2002 | BS EN 13852-2 - CRANES - OFFSHORE CRANES - PART 2: FLOATING CRANES |
| 13/30286126 DC : 0 | BS EN 12312-3 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 3: CONVEYOR BELT VEHICLES |
| 04/30114100 DC : DRAFT MAY 2004 | PREN 14958 - GRAIN PROCESSING EQUIPMENT - GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12151:2007 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| 05/30128234 DC : DRAFT FEB 2005 | EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| 02/710617 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| PREN 13411-4 : DRAFT 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING |
| CSA ISO 22559-1 : 2016 | SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS) |
| 08/30177213 DC : DRAFT JUNE 2008 | BS EN 13524 AMD1 - HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
| 04/102838 DC : DRAFT JAN 2004 | EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| BS EN 15268:2008 | Petrol filling stations. Safety requirements for the construction of submersible pump assemblies |
| 03/118895 DC : 0 | EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| 05/30127970 DC : DRAFT JAN 2005 | EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| 04/30124285 DC : 0 | EN 15059 - SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
| 05/19981971 DC : 0 | BS EN 1034-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
| 09/30202310 DC : 0 | BS EN 12514-2 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS |
| 00/715016 DC : DRAFT OCT 2000 | PREN 13977 - RAILWAY APPLICATIONS - TRACK - PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| GOST R EN 818-1 : 2005 | SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL REQUIREMENTS FOR ACCEPTANCE |
| UNI ISO 11228-3 : 2009 | ERGONOMICS - MANUAL HANDLING - PART 3: HANDLING OF LOW LOADS AT HIGH FREQUENCY |
| UNI EN 15268 : 2009 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES |
| BS EN 15061 : 2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| ISO/TS 22559-1:2004 | Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs) |
| BS EN 12312-8 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS |
| NF EN 1501-2 : 2005 + A1 2010 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| NF EN 1804-2 : 2002 + A1 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS |
| I.S. EN 15268:2008 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES |
| NF EN 1804-3 : 2006 + A1 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 1804-1:2010-05 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements (includes Amendment A1:2010) |
| DIN EN 1804-2:2010-05 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams (includes Amendment A1:2010) |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| DIN EN 1005-3:2009-01 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION |
| DIN EN 12215:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 12267:2011-02 | Food processing machinery - Circular saw machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12321:2009-07 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| DIN EN 1677-4:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| DIN EN 1005-2:2009-05 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| DIN EN 12312-17:2009-08 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 17: AIR CONDITIONING EQUIPMENT |
| DIN EN 1005-1:2009-04 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| DIN EN 1034-22:2010-06 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood grinders (includes Amendment A1:2009) |
| DIN EN 13000:2014-11 | Cranes - Mobile Cranes; German version EN 13000:2010+A1:2014 |
| DIN EN 13128:2009-09 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| DIN EN 1010-4:2010-12 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines (includes Amendment A1:2009) |
| DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12957:2009-07 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| DIN EN 1870-14:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| DIN EN 1492-4:2009-02 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| DIN EN 12984:2011-02 | Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12855:2011-02 | Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 1756-1:2008-10 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods (includes Amendment A1:2008) |
| DIN EN 1677-1:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| DIN EN 1677-5:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| DIN EN ISO 10472-4:2009-09 | Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) |
| DIN EN 12312-19:2009-08 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 19: AIRCRAFT JACKS, AXLE JACKS AND HYDRAULIC TAIL STANCHIONS |
| DIN EN 12417:2009-07 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| DIN EN 12312-16:2009-08 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 16: AIR START EQUIPMENT |
| DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 12312-15:2009-08 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS |
| DIN EN 12312-10:2009-08 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 10: CONTAINER/PALLET TRANSFER TRANSPORTERS |
| DIN EN 1492-2:2009-05 | TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| DIN EN ISO 10472-3:2009-10 | Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
| DIN EN 620:2011-07 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials (includes Amendment A1:2010) |
| DIN EN 14010:2009-12 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009) |
| DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 14502-2:2009-05 | CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS |
| DIN EN 14466:2008-09 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests (includes Amendment A1:2008) |
| DIN EN 15233:2007-11 | Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
| DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
| DIN EN 693:2011-11 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| DIN EN ISO 11553-1:2009-03 | Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
| DIN EN 12312-7:2009-08 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIRCRAFT MOVEMENT EQUIPMENT |
| DIN EN 14238:2010-02 | Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009) |
| DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
| BS EN 1501-2 : 2005 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| BS EN 1757-1:2001 | Safety of industrial trucks. Pedestrian propelled trucks Stacker trucks |
| BS EN 15056 : 2006 | CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS |
| BS EN 14238 : 2004 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 894-3:2010-01 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators (includes Amendment A1:2008) |
| BS EN 1175-1 : 1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| BS EN 13355 : 2004 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| BS EN 12460:1998 | Biotechnology. Large-scale process and production. Guidance on equipment selection and installation in accordance with the biological risk |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| BS EN 940 : 2009 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| BS EN 13414-1 : 2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| BS EN 1175-3 : 1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
| BS EN 15233:2007 | Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
| BS EN 12757-1 : 2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| BS EN 1492-2 : 2000 | TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES, FOR GENERAL PURPOSE USE |
| ISO 10472-4:1997 | Safety requirements for industrial laundry machinery Part 4: Air dryers |
| BS EN 13218 : 2002 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| BS EN 620 : 2002 | |
| BS EN ISO 10472-3:2008 | Safety requirements for industrial laundry machinery Washing tunnel lines including component machines |
| BS EN 12629-6 : 2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS |
| UNE-EN 13135-2:2005 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| I.S. EN 1005-1:2002 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| I.S. EN 1005-3:2002 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION |
| I.S. EN 12855:2003 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| I.S. EN 13411-3:2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING |
| I.S. EN 619:2002 | |
| DIN EN 1915-1:2001-06 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| I.S. EN 13414-1:2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| I.S. EN 1034-2:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
| I.S. EN 12717:2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| I.S. EN 13414-3:2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 3: GROMMETS AND CABLE-LAID SLINGS |
| I.S. EN 12312-20:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS |
| I.S. EN ISO 10472-6:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 6: IRONING AND FUSING PRESSES |
| I.S. EN 12385-1:2002 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNI EN 1804-3 : 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| I.S. EN 1804-3:2006 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| I.S. EN 12198-1:2000 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| I.S. EN 1010-4:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| I.S. EN 1175-2:1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
| I.S. EN 12629-6:2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS |
| I.S. EN 15056:2006 | CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS |
| I.S. EN 1070:1999 | SAFETY OF MACHINERY - TERMINOLOGY |
| I.S. EN 12198-3:2002 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING |
| I.S. EN 12757-1:2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| UNI EN 1804-2 : 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS |
| I.S. EN 12215:2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 1870-1:1999-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| I.S. EN 12267:2003 | FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1570:2009-12 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| I.S. EN 1028-1:2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 14238:2004 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| I.S. EN 1034-22:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS |
| I.S. EN 415-3:2000 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| I.S. EN ISO 10472-4:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS |
| DIN EN 12385-7:2003-02 | STEEL WIRE ROPES - SAFETY - PART 7: LOCKED COIL ROPES FOR MINE SHAFTS |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| DIN EN 13218:2010-09 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| EN 1804-2:2001+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams |
| I.S. EN 1034-4:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
| I.S. EN 13889:2003 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
| I.S. EN 1034-6:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
| I.S. EN 14658:2005 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING |
| I.S. EN 1677-2:2000 | COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8 |
| I.S. EN 13411-1:2002 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| I.S. EN 818-7:2002 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| I.S. EN 818-3:1999 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
| I.S. EN 1677-5:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| I.S. EN 12312-17:2004 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 17: AIR CONDITIONING EQUIPMENT |
| I.S. EN 1492-2:2000 | TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| I.S. EN 1804-1:2002 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| UNI EN ISO 11553-1 : 2009 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 12505:2000 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 12312-10:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 10: CONTAINER/PALLET TRANSFER TRANSPORTERS |
| DIN EN 81-70:2005-09 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGERS LIFTS - PART 70: ACCESSIBILITY TO LIFTS FOR PERSONS INCLUDING PERSONS WITH DISABILITY |
| I.S. EN 1804-2:2002 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS |
| I.S. EN ISO 10472-1:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 12621:2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| DIN EN 13135-1:2004-05 | CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT |
| I.S. EN 1677-3:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8 |
| UNI EN 1672-2 : 2009 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS |
| DIN EN 12385-9:2003-03 | STEEL WIRE ROPES - SAFETY - PART 9: LOCKED COIL CARRYING ROPES FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS |
| I.S. EN 14502-2:2005 | CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS |
| EN 1804-1:2001+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements |
| DIN EN 13218:2002-09 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| DIN EN 13852-2:2005-03 | Cranes - Offshore cranes - Part 2: Floating cranes |
| I.S. EN 1010-3:2002 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES |
| I.S. EN 1677-6:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| I.S. EN 12355:2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1034-7:2010-06 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests (includes Amendment A1:2009) |
| I.S. EN 12629-5-1:2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-1: PIPE MAKING MACHINES MANUFACTURING IN THE VERTICAL AXIS |
| I.S. EN 1034-5:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
| I.S. EN 1677-4:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| I.S. EN 930:1998 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 500-1:2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 1870-14:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| I.S. EN 13411-6:2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| I.S. EN 818-6:2000 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| I.S. EN 12385-3:2004 | STEEL WIRE ROPES - SAFETY - PART 3: INFORMATION FOR USE AND MAINTENANCE |
| I.S. EN 818-1:1996 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE |
| I.S. EN 13985:2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| I.S. EN 1034-7:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS |
| I.S. EN 13355:2005 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| I.S. EN 931:1998 | FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12629-5-2:2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-2: PIPE MAKING MACHINES MANUFACTURING IN THE HORIZONTAL AXIS |
| I.S. EN 12629-5-4:2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-4: CONCRETE PIPE COATING MACHINES |
| I.S. EN 12312-5:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| I.S. EN 14466:2005 | FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes |
| I.S. EN 13411-2:2001 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 2: SPLICING OF EYES FOR WIRE ROPE SLINGS |
| EN 12385-3:2004+A1:2008 | Steel wire ropes - Safety - Part 3: Information for use and maintenance |
| I.S. EN 12984:2006 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1175-3:1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
| I.S. EN 1672-2:2005 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - HYGIENE REQUIREMENTS |
| EN 12312-5:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
| DIN EN 818-3:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
| DIN EN 13478:2008-12 | SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
| DIN EN 12385-8:2003-03 | STEEL WIRE ROPES - SAFETY - PART 8: STRANDED HAULING AND CARRYING-HAULING ROPES FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS |
| I.S. EN 940:2009 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| I.S. EN 1492-4:2004 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| DIN EN 1034-5:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters (includes Amendment A1:2009) |
| I.S. EN 818-5:1999 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| I.S. EN 415-5:2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| I.S. EN 741:2000 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS |
| I.S. EN 12312-16:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 16: AIR START EQUIPMENT |
| I.S. EN 13120:2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| EN 1804-3:2006+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
| I.S. EN 13411-7:2006 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| UNI EN 1804-1 : 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| DIN EN 13788:2002-04 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| I.S. EN 818-4:1997 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| I.S. EN 574:1997 | SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| I.S. EN 1889-2:2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| DIN EN 1034-4:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities (includes Amendment A1:2009) |
| I.S. EN 12321:2003 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| I.S. EN 1756-1:2002 | TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS |
| I.S. EN 81-1:1999 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| I.S. EN 12312-18:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS |
| I.S. EN 12312-19:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 19: AIRCRAFT JACKS, AXLE JACKS AND HYDRAULIC TAIL STANCHIONS |
| I.S. EN 1677-1:2000 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| I.S. EN 12753:2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN ISO 10472-5:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 5: FLATWORK IRONERS, FEEDERS AND FOLDERS |
| DIN EN 1034-6:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender (includes Amendment A1:2009) |
| I.S. EN 13411-5:2003 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| EN 13155:2003+A2:2009 | Cranes - Safety - Non-fixed load lifting attachments |
| DIN EN 12957:2001-12 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| I.S. EN ISO 10472-2:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 2: WASHING MACHINES AND WASHER-EXTRACTORS |
| DIN EN 1757-4:2003-11 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 4: SCISSOR LIFT PALLET-TRUCKS |
| I.S. EN 81-3:2000 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
| I.S. EN 1175-1:1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| I.S. EN 620:2002 | |
| I.S. EN 818-2:1997 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
| EN 415-3:1999+A1:2009 | Safety of packaging machines - Part 3: Form, fill and seal machines |
| I.S. EN 1501-2:2005 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| I.S. EN 12629-7:2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS |
| I.S. EN 12921-1:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| I.S. EN 81-2:1999 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| DIN EN 1034-2:2010-09 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums (includes Amendment A1:2009) |
| I.S. EN ISO 10472-3:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 3: WASHING TUNNEL LINES INCLUDING COMPONENT MACHINES |
| I.S. EN 12635:2002 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - INSTALLATION AND USE |
| I.S. EN 894-3:2000 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| I.S. EN 415-7:2006 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 13155:2003 | CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| UNI EN 1677-6 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| UNI EN ISO 10472-3 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 3: WASHING TUNNEL LINES INCLUDING COMPONENT MACHINES |
| UNI EN 14658 : 2010 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING |
| NF EN 619 : 2003 + A1 2010 | |
| VDI 4003:2007-03 | Reliability management |
| VDI 4500 Blatt 1:2006-06 | Technical documentation - Definitions and legal basics |
| UNI EN 13684 : 2010 | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| GOST R EN 818-3 : 2005 | SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE STEEL CHAINS FOR GRADE 4 CHAIN SLINGS |
| UNI EN 415-8 : 2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| I.S. EN 1552:2003 | UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS |
| BS EN 60825-12:2004 | Safety of laser products Safety of free space optical communication systems used for transmission of information |
| BS EN 50308:2004 | Wind turbines. Protective measures. Requirements for design, operation and maintenance |
| UNI EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| I.S. EN 13788:2002 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| 00/562572 DC : DRAFT JUN 2000 | BS EN 13921-6 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 6: SENSORY FACTORS |
| I.S. EN 12840:2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| 95/710328 DC : 0 | PREN 12044 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURE MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| 09/30181685 DC : 0 | BS EN 13042-3:2007/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES |
| 02/705771 DC : DRAFT AUG 2002 | PREN 81-71 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS TO PASSENGER LIFTS AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| 04/30116569 DC : DRAFT NOV 2004 | EN 15056 - CRANES - REQUIREMENTS FOR SPREADERS |
| 05/19982359 DC : DRAFT MAR 2005 | BS ISO 11228-2 - ERGONOMICS - MANUAL HANDLING - PART 2: PUSHING AND PULLING |
| DIN EN 15061:2009-05 | Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008) |
| BS ISO 11228-3:2007 | Ergonomics. Manual handling Handling of low loads at high frequency |
| 03/100093 DC : DRAFT JAN 2003 | BS EN 14502-2 - CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS |
| 09/30181679 DC : 0 | BS EN 13042-1:2007/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER |
| BS EN 415-8:2008 | Safety of packaging machines Strapping machines |
| 05/30129943 DC : 0 | EN 15162 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
| 04/30058509 DC : DRAFT JUNE 2004 | BS EN 14985 - CRANES - SLEWING JIB CRANES |
| 05/30130673 DC : DRAFT MAR 2005 | BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| 96/104565 DC : JUN 96 | EN 12437-3 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 3: STAIRWAYS, STEPLADDERS AND GUARDRAILS |
| 04/30110326 DC : DRAFT APR 2004 | EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| 12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
| 04/30110543 DC : 0 | EN 1845 - FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| 04/30114965 DC : DRAFT JUN 2004 | EN 14973 - CONVEYOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS |
| 05/19981967 DC : 0 | BS EN 1034-6 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: PULPERS |
| UNI EN 14753 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
| 12/30260302 DC : 0 | BS EN 12268 - FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 05/30133333 DC : DRAFT MAY 2005 | EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| 02/710588 DC : DRAFT AUG 2002 | BS EN 14439 - CRANES - TOWER CRANES |
| 08/30183861 DC : DRAFT SEP 2008 | BS EN 13732 - FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE |
| 00/562569 DC : DRAFT JUN 2000 | BS EN 13921-1 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 1: GENERAL REQUIREMENTS FOR THE DESIGN AND THE SPECIFICATION |
| CEI EN 60825-12 : 2005 | SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
| 05/30131803 DC : DRAFT APR 2005 | EN 15198 - METHODOLOGY FOR THE IGNITION HAZARD ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| 05/30133297 DC : DRAFT MAY 2005 | EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| 03/111188 DC : DRAFT AUG 2003 | BS EN 1010-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| 05/30138432 DC : DRAFT AUG 2005 | BS EN 1501-1 - REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES |
| UNI EN 1010-4 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| ONORM EN 12385-3 : 2008 | STEEL WIRE ROPES - SAFETY - PART 3: INFORMATION FOR USE AND MAINTENANCE |
| I.S. EN 13000:2010 | Cranes - Mobile cranes |
| DIN EN 14753:2008-03 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
| I.S. EN 60825-12:2004 | SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
| BS EN 14958 : 2006 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 14958:2006 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 50374:2004 | CONDUCTOR CARS |
| I.S. EN 14753:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL |
| I.S. EN 50308:2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| I.S. EN 13684:2004 | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| UNI EN 81-71 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS TO PASSENGER LIFTS AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| 17/30364338 DC : 0 | BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
| DIN EN 13684:2015-05 (Draft) | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| ISO 22559-1:2014 | Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs) |
| UNE-EN 1870-14:2008 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
| DIN EN 12921-1:2011-02 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010) |
| DIN EN 81-70:2015-11 (Draft) | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATIONS OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGERS LIFTS - PART 70: ACCESSIBILITY TO LIFTS FOR PERSONS INCLUDING PERSONS WITH DISABILITY |
| DIN EN 12629-6:2011-02 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products (includes Amendment A1:2010) |
| BS EN 13684 : 2004 | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 13120:2014-09 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN ISO 10472-5:2009-09 | Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997) |
| NF EN 12312-7 : 2006 + A1 2010 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIR-CRAFT MOVEMENT EQUIPMENT |
| DIN EN 1005-4:2009-01 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| UNI EN 1501-2 : 2010 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| DIN EN ISO 10472-1:2009-10 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| DIN EN 12312-20:2009-08 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS |
| DIN EN ISO 10472-2:2009-10 | Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) |
| DIN EN 1677-2:2008-06 | Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 (includes Amendment A1:2008) |
| DIN EN 1492-1:2009-05 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| DIN EN 12355:2011-02 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN ISO 10472-6:2009-10 | Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997) |
| DIN EN 12649:2011-09 | Concrete compactors and smoothing machines - Safety |
| DIN EN 12505:2010-11 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 1677-3:2008-06 | Components for slings - Safety - Part 3: Forged steel self-locking hooks, Grade 8 (includes Amendment A1:2008) |
| DIN EN 12312-11:2005-06 | Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers |
| DIN EN 1677-6:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| DIN EN 12717:2009-07 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| DIN EN 13155:2009-08 | Cranes - Safety - Non-fixed load lifting attachments (includes Amendment A2:2009) |
| DIN EN 818-2:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
| DIN EN 818-5:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| DIN EN 13736:2009-11 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| DIN EN 692:2009-10 | Machine tools - Mechanical presses - Safety (includes Amendment A1:2009) |
| DIN EN 676:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| DIN EN 930:2010-07 | Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements (includes Amendment A2:2009) |
| DIN EN 13985:2009-11 | Machine tools - Safety - Guillotine shears (includes Amendment A1:2009) |
| DIN EN 931:2010-07 | Footwear manufacturing machines - Lasting machines - Safety requirements (includes Amendment A2:2009) |
| DIN EN 741:2011-06 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials (includes Amendment A1:2010) |
| DIN EN 14658:2010-06 | Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining (includes Amendment A1:2010) |
| BS EN 999 : 1999 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| BS EN 1677-3 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8 |
| BS EN 13889 : 2003 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
| BS EN 12478:2001 | Safety of machine tools. Large numerically controlled turning machines and turning centres |
| BS EN 574 : 1997 | SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| BS EN ISO 10472-5:2008 | Safety requirements for industrial laundry machinery Flatwork ironers, feeders and folders |
| BS EN 12629-5-4 : 2003 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-4: CONCRETE PIPE COATING MACHINES |
| BS EN 818-1 : 1996 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE |
| ISO 10472-2:1997 | Safety requirements for industrial laundry machinery Part 2: Washing machines and washer-extractors |
| BS EN 13898 : 2003 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| BS EN 12355 : 2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13135-2 : 2004 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| BS EN 1034-5 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
| BS EN 12312-5 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| BS EN 1804-1 : 2001 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| BS EN 13411-1 : 2002 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| BS EN 414:2000 | Safety of machinery. Rules for the drafting and presentation of safety standards |
| BS EN 13411-6 : 2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| BS EN 12505 : 2000 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 15198:2007-11 | Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
| BS EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar. Safety requirements |
| BS EN 12753 : 2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 741 : 2000 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS |
| BS EN 12649 : 2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| BS EN 1570 : 1999 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| UNI EN 267 : 2011 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| I.S. EN 1005-4:2005 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| UNE-EN 81-2:2001 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS. |
| I.S. EN 1005-2:2003 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| EN 12312-7:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment |
| I.S. EN 12312-7:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIR-CRAFT MOVEMENT EQUIPMENT |
| UNE-EN 693:2001 | Machine tools - Safety - Hydraulic presses |
| EN 13985:2003+A1:2009 | Machine tools - Safety - Guillotine shears |
| EN 1570:1998+A2:2009 | Safety requirements for lifting tables |
| EN 12629-7:2004+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
| UNI EN 12921-1 : 2010 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| UNI EN ISO 10472-6 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 6: IRONING AND FUSING PRESSES |
| UNI EN 818-1 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE |
| UNI EN 1005-4 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| UNI EN 13135-2 : 2010 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| UNI EN 12581 : 2010 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 12629-5-4 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-4: CONCRETE PIPE COATING MACHINES |
| UNI EN 1677-1 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| UNI EN 12629-5-3 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-3: PIPE PRESTRESSING MACHINES |
| UNI EN 12629-6 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS |
| UNI EN 818-4 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| UNI EN 619 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS |
| UNI EN 13414-3 : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 3: GROMMETS AND CABLE-LAID SLINGS |
| UNI EN 1492-2 : 2009 | TEXTILE SLINGS - SAFETY - PART 2: ROUND SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES |
| UNI EN 1175-1 : 2010 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| UNI EN 500-1 : 2010 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNI EN 13736 : 2009 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| EN 12312-20:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units |
| UNI EN 13414-2 : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| UNI EN 1677-4 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| UNI EN 692 : 2009 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| UNI EN 1677-3 : 2008 | COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8 |
| UNI EN 1570 : 2009 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| UNI EN 13411-2 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 2: SPLICING OF EYES FOR WIRE ROPE SLINGS |
| UNI EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| UNI EN 1028-1 : 2008 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 13411-5 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| UNI EN 574 : 2008 | SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| UNI EN 12267 : 2010 | FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 15056 : 2009 | CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS |
| UNI EN 12981 : 2009 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 12855 : 2010 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13889 : 2009 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6: SAFETY |
| UNI EN 12649 : 2011 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| UNI EN 12417 : 2009 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| UNI EN 818-6 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| UNI EN 1034-4 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
| UNI EN ISO 10472-2 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 2: WASHING MACHINES AND WASHER-EXTRACTORS |
| UNI EN 12921-4 : 2009 | MACHINES FOR SURFACE CLEANING AND PRETREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS AND VAPOURS - PART 4: SAFETY OF MACHINES USING HALOGENATED SOLVENTS |
| UNI EN 14466 : 2008 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| UNI EN 81-3 : 2008 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
| UNI EN 81-2 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| UNI EN 13120 : 2014 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| UNI EN 12757-1 : 2010 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| UNI EN 13414-1 : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| I.S. EN 1757-3:2002 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 3: PLATFORM TRUCKS |
| UNI EN 13478 : 2008 | SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
| UNI EN 818-3 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
| UNI EN 1034-7 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS |
| UNI EN 818-7 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| UNI EN 12984 : 2010 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1034-6 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
| UNI EN 81-1 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| UNI EN 415-5 : 2010 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| UNI EN 1870-14 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| UNI EN 13898 : 2009 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| UNI EN 1870-1 : 2009 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| UNI EN 12321 : 2009 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| UNI EN 13411-6 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| UNI EN 12753 : 2010 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 13218 : 2008 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| UNI EN 14238 : 2009 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| UNI EN 894-3 : 2009 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| ONORM EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| UNI EN 931 : 2010 | FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12629-7 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS |
| UNI EN 12629-5-2 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-2: PIPE MAKING MACHINES MANUFACTURING IN THE HORIZONTAL AXIS |
| UNI EN 13000 : 2014 | CRANES - MOBILE CRANES |
| UNI EN 1175-3 : 2010 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
| UNI EN 1492-1 : 2009 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES |
| UNI EN 930 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 14502-2 : 2008 | CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS |
| UNI EN 1010-3 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES |
| UNI EN 999 : 2008 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| UNI EN 1889-2 : 2009 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| UNI EN 12198-1 : 2009 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| UNI EN 1492-4 : 2009 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| UNI EN 1034-2 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
| UNI EN 12717 : 2009 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| UNI EN 13411-1 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| UNI EN 12621 : 2010 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN 12629-5-1 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-1: PIPE MAKING MACHINES MANUFACTURING IN THE VERTICAL AXIS |
| UNI EN 14070 : 2009 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNI EN 1005-3 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION |
| UNI EN 818-5 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| UNI EN ISO 10472-1 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| UNI EN 693 : 2011 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| UNI EN 12635 : 2009 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - INSTALLATION AND USE |
| UNI EN 14010 : 2009 | SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES |
| UNI EN 1005-1 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| UNI EN 13985 : 2009 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| UNI EN 12957 : 2009 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| UNI EN 12385-1 : 2009 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 10472-4 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS |
| UNI EN 1034-5 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
| UNI EN 13128 : 2009 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| UNI EN 13355 : 2009 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNI EN 1677-5 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| UNI EN 12215 : 2010 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| UNI EN 818-2 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
| UNI EN 940 : 2012 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| UNI EN 12355 : 2010 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 741 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS |
| UNI EN 13135-1 : 2010 | CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT |
| UNI EN 415-7 : 2008 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| UNI EN 1175-2 : 2010 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
| UNI EN 12505 : 2010 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 14958 : 2009 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12198-3 : 2008 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING |
| UNI EN 1005-2 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| UNI EN 1034-22 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS |
| UNI EN 676 : 2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| UNI EN 1677-2 : 2008 | COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8 |
| UNI EN ISO 10472-5 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 5: FLATWORK IRONERS, FEEDERS AND FOLDERS |
| 00/715165 DC : DRAFT OCT 2000 | BS EN 13954 - FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| 00/107021 DC : DRAFT OCT 2000 | BS EN 1501-2 - REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| 08/30182786 DC : DRAFT JULY 2008 | BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| CEI EN 50374 : 2005 | CONDUCTOR CARS |
| UNI EN 13411-3 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING |
| 07/30169273 DC : 0 | BS EN 61029-2-11 - SAFETY OF TRANSPORTABLE MOTOR - OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS |
| 00/707658 DC : DRAFT APR 2000 | PREN 13852-2 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| I.S. EN 12478:2000 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| PREN 614-1 : DRAFT 2003 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| 04/30125922 DC : 0 | EN 15089 - EXPLOSION ISOLATION SYSTEMS |
| UNI EN 1501-3 : 2008 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
| ISO 11228-3:2007 | Ergonomics Manual handling Part 3: Handling of low loads at high frequency |
| 05/19981975 DC : DRAFT JUN 2005 | BS EN 1034-2 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
| 05/30131998 DC : 0 | BS EN 15180 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 00/706812 DC : DRAFT MAR 2000 | BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 1672-2 : DRAFT 2003 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS |
| 04/30113996 DC : 0 | PREN 81-41 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| 98/718705 DC : DRAFT DEC 1998 | PREN 13411-6 - TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET CLEVIS |
| 05/30137922 DC : DRAFT AUG 2005 | ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| 04/30126179 DC : DRAFT DEC 2004 | EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| 02/714362 DC : DRAFT DEC 2002 | EN 12312-20 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: GROUND POWER EQUIPMENT |
| DIN EN 15268:2008-11 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP |
| 07/30168572 DC : 0 | BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| 04/30124187 DC : 0 | PREN 415-8 - SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| 00/707575 DC : DRAFT APR 2000 | ISO/DIS 12100-1 - SAFETY OF MACHINERY - BASIC CONCEPTS AND GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY AND METHODOLOGY |
| 05/30133451 DC : 0 | EN 115 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS |
| 04/19986707 DC : 0 | BS EN 1804-4 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 4: ELECTRO-HYDRAULIC CONTROL SYSTEMS |
| 05/30133339 DC : DRAFT MAY 2005 | EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| 01/712575 DC : DRAFT SEP 2001 | ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION |
| 03/112610 DC : DRAFT AUG 2003 | EN 14710-1 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY |
| 04/30086349 DC : DRAFT APR 2004 | EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| 00/705761 DC : DRAFT FEB 2000 | PREN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| ISO 9355-3:2006 | Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators |
| I.S. CEN/TR 14489:2005 | FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT |
| DIN EN 81-71:2015-10 (Draft) | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER LIFTS AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| GOST EN 1760-1 : 2004 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1 - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| EN 1756-1:2001+A1:2008 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods |
| EN 13748 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| DIN EN 12629-5-1:2011-02 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis (includes Amendment 1:2010) |
| DIN EN 12753:2011-02 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| DIN EN 12757-1:2011-02 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010) |
| DIN EN 12629-5-4:2011-02 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines (includes Amendment 4:2010) |
| I.S. EN 1501-3:2008 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
| I.S. EN 15011:2011 | CRANES - BRIDGE AND GANTRY CRANES |
| DIN EN 14985:2012-05 | Cranes - Slewing jib cranes |
| NF EN 12312-15 : 2006 + A1 2010 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS |
| I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| NF EN 1804-1 : 2002 + A1 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| DIN EN 12635:2015-07 (Draft) | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - INSTALLATION AND USE |
| DIN EN 12312-18:2009-08 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS |
| DIN EN 940:2012-05 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| EN 620:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| DIN EN 415-3:2010-07 | Safety of packaging machines - Part 3: Form, fill and seal machines (includes Amendment A1:2009) |
| DIN EN 13814:2005-06 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| DIN EN 818-7:2008-07 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) (includes Amendment A1:2008) |
| DIN EN 12385-3:2008-06 | Steel wire ropes - Safety - Part 3: Information for use and maintenance (includes Amendment A1:2008) |
| DIN EN 1870-1:2009-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| DIN EN 818-6:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| DIN EN 12629-7:2011-03 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products (includes Amendment A1:2010) |
| BS EN 415-5 : 2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| BS EN 12385-3 : 2004 | STEEL WIRE ROPES - SAFETY - PART 3: INFORMATION FOR USE AND MAINTENANCE |
| BS EN 12385-1 : 2002 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 1010-3 : 2002 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES |
| BS EN 12198-1 : 2000 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| BS EN 13135-1 : 2003 | CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT |
| BS EN 1005-5:2007 | Safety of machinery. Human physical performance Risk assessment for repetitive handling at high frequency |
| BS EN 1028-1 : 2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| BS EN 415-4:1998 | Safety of packaging machines Palletizers and depalletizers |
| UNE-EN 12621:2006 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| BS EN 12629-5-1 : 2003 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-1: PIPE MAKING MACHINES MANUFACTURING IN THE VERTICAL AXIS |
| I.S. EN ISO 11553-1:2008 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
| BS EN 1175-2 : 1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
| BS EN 13411-5 : 2003 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| BS EN 1005-1 : 2001 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| BS EN 1804-3 : 2006 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| BS EN 12267 : 2003 | FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1889-2 : 2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| BS EN 818-4 : 1997 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| I.S. EN 12312-15:2006 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS |
| BS EN 12417 : 2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| BS EN 12840:2001 | Safety of machine tools. Manually controlled turning machines with or without automatic control |
| BS EN 12462:1998 | Biotechnology. Performance criteria for pumps |
| BS EN 931 : 1998 | FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS |
| BS EN 1677-1 : 2000 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| BS EN 12921-4 : 2005 | MACHINES FOR SURFACE CLEANING AND PRETREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS AND VAPOURS - PART 4: SAFETY OF MACHINES USING HALOGENATED SOLVENTS |
| BS EN 619 : 2002 | |
| BS EN 1834-1:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable gas and vapour atmospheres |
| BS EN 13736 : 2003 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| BS EN 1010-4 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| BS EN 500-1 : 2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| BS EN 12312-20 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS |
| BS EN 81-1 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| BS EN 1034-4 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
| BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| BS EN ISO 10472-2:2008 | Safety requirements for industrial laundry machinery Washing machines and washer-extractors |
| BS EN 1553:2000 | Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common safety requirements |
| UNE-EN 741:2000 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
| UNE-EN 1175-1:1998 | SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS. |
| BS EN 1034-6 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
| BS EN 818-7 : 2002 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| BS EN 1757-2:2001 | Safety of industrial trucks. Pedestrian propelled trucks Pallet trucks |
| BS EN 415-3 : 2000 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| UNE-EN 12649:2009 | Concrete compactors and smoothing machines - Safety |
| BS EN 13985 : 2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| BS EN 1726-2:2000 | Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
| BS EN 12385-8:2002 | Steel wire ropes. Safety Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
| BS EN 13478 : 2002 | SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
| ISO 11553-1:2005 | Safety of machinery Laser processing machines Part 1: General safety requirements |
| BS EN 12312-17 : 2004 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 17: AIR CONDITIONING EQUIPMENT |
| ISO 10472-5:1997 | Safety requirements for industrial laundry machinery Part 5: Flatwork ironers, feeders and folders |
| BS EN 1746:1999 | Safety of machinery. Guidance for the drafting of the noise clauses of safety standards |
| BS EN 81-2 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| BS EN 930 : 1997 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
| BS EN 12717 : 2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| BS EN 1034-2 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
| UNE-EN 12505:2001 | FOOD PROCESSING MACHINERY. CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS. SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 14985:2012 | Cranes. Slewing jib cranes |
| BS EN 1756-1 : 2001 | TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS |
| ISO 10472-6:1997 | Safety requirements for industrial laundry machinery Part 6: Ironing and fusing presses |
| BS EN 415-7 : 2006 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| BS EN 818-2 : 1997 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
| BS EN 13411-7 : 2006 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| BS EN 1757-4:2003 | Safety of industrial trucks. Pedestrian propelled trucks Scissor lift pallet-trucks |
| BS EN 693 : 2001 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| IEC 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN 1677-5 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
| BS EN 13788:2002 | Machine tools. Safety. Multi-spindle automatic turning machines |
| BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNE-EN 619:2003 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads. |
| BS EN 14010 : 2003 | |
| BS EN 14502-2 : 2005 | CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS |
| BS EN 12415:2001 | Safety of machine tools. Small numerically controlled turning machines and turning centres |
| BS EN 13155 : 2003 | CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| BS EN 12957 : 2001 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| BS EN 12312-11:2005 | Aircraft ground support equipment. Specific requirements Container/pallet dollies and loose load trailers |
| BS EN 676 : 2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| BS EN 1677-4 : 2000 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| BS EN 15011 : 2011 | CRANES - BRIDGE AND GANTRY CRANES |
| BS EN 12312-16 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 16: AIR START EQUIPMENT |
| BS EN 1034-7 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS |
| BS EN ISO 11111:1996 | Safety requirements for textile machinery |
| BS EN 1834-2:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| BS EN 12385-9:2002 | Steel wire ropes. Safety Locked coil carrying ropes for cableway installations designed to carry persons |
| UNE-EN 13000:2010 | Cranes - Mobile cranes |
| UNE-EN 1175-3:1998 | SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. |
| BS EN 13202:2000 | Ergonomics of the thermal environment. Temperatures of touchable hot surfaces. Guidance for establishing surface temperature limit values in product standards with the aid of EN 563 |
| UNE-EN 940:2010 | Safety of woodworking machines - Combined woodworking machines |
| 09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
| BS EN 12312-15 : 2006 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS |
| BS EN 12312-19 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 19: AIRCRAFT JACKS, AXLE JACKS AND HYDRAULIC TAIL STANCHIONS |
| UNE-EN 620:2002 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| BS EN ISO 10472-6:2008 | Safety requirements for industrial laundry machinery Ironing and fusing presses |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| DIN EN 15056:2010-02 | Cranes - Requirements for container handling spreaders (includes Amendment A1:2009) |
| DIN EN 676:2008-11 | Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008) |
| BS EN 1672-2 : 2005 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS |
| BS EN 818-5 : 1999 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| CEN/TR 14489:2005 | Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment |
| DIN EN 13411-3:2011-04 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing (includes Amendment A1:2008) |
| DIN EN 999:2008-10 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEED OF PARTS OF THE HUMAN BODY |
| EN 741:2000+A1:2010 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
| EN 13788 : 2001 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| EN 13814:2004 | Fairground and amusement park machinery and structures - Safety |
| EN 1834-1:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
| EN 692:2005+A1:2009 | Machine tools - Mechanical presses - Safety |
| EN ISO 10472-5:2008 | Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997) |
| EN 1677-5:2001+A1:2008 | Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
| EN 619:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
| EN 14466:2005+A1:2008 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests |
| EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 1492-4:2004+A1:2008 | Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
| EN 818-6:2000+A1:2008 | Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
| EN 1757-4 : 2003 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 4: SCISSOR LIFT PALLET-TRUCKS |
| EN 415-7:2006+A1:2008 | Safety of packaging machines - Part 7: Group and secondary packaging machines |
| EN 415-8:2008 | Safety of packaging machines - Part 8: Strapping machines |
| EN 12984:2005+A1:2010 | Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements |
| EN ISO 10472-4:2008 | Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) |
| EN 14985:2012 | Cranes - Slewing jib cranes |
| EN 81-2 : 1998 + A3 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| EN 15198:2007 | Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
| EN 15056:2006+A1:2009 | Cranes - Requirements for container handling spreaders |
| EN 1677-6:2001+A1:2008 | Components for slings - Safety - Part 6: Links - Grade 4 |
| EN 12312-17:2004+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment |
| EN 1757-3:2002 | Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks |
| EN 15268:2008 | Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
| EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| EN 14238:2004+A1:2009 | Cranes - Manually controlled load manipulating devices |
| EN 13889:2003+A1:2008 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
| EN 12629-5-2:2003+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
| EN ISO 10472-6:2008 | Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997) |
| EN 414 : 2000 | SAFETY OF MACHINERY - RULES FOR THE DRAFTING AND PRESENTATION OF SAFETY STANDARDS |
| EN 818-3:1999+A1:2008 | Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 |
| EN 500-1:2006+A1:2009 | Mobile road construction machinery - Safety - Part 1: Common requirements |
| EN 1726-2:2000 | Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
| EN 930:1997+A2:2009 | Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements |
| EN ISO 10472-2:2008 | Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) |
| EN 15333-1:2006/AC:2009 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| EN 818-7:2002+A1:2008 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
| EN 1492-2:2000+A1:2008 | Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use |
| EN 15233:2007 | Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
| EN 1552:2003 | Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems |
| EN 818-2:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 |
| EN 81-1:1998+A3:2009 | Safety rules for the construction and installation of lifts - Part 1: Electric lifts |
| EN 1870-14:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
| EN ISO 8230 : 1997 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| EN 1870-1:2007+A1:2009 | Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws |
| EN ISO 10472-3:2008 | Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
| EN 1757-1 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 1: STACKER TRUCKS |
| EN 940:2009+A1:2012 | Safety of woodworking machines - Combined woodworking machines |
| EN 818-1:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
| EN 693 : 2001 COR 2011 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| EN 1677-4:2000+A1:2008 | Components for slings - Safety - Part 4: Links, Grade 8 |
| EN 14502-2:2005+A1:2008 | Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations |
| EN 1834-3:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
| EN 1175-3:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| EN 14753:2007 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
| EN 1492-1:2000+A1:2008 | Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use |
| EN 1757-2 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 2: PALLET TRUCKS |
| EN 415-5:2006+A1:2009 | Safety of packaging machines - Part 5: Wrapping machines |
| EN 1677-3:2001+A1:2008 | Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8 |
| EN 1889-2:2003+A1:2009 | Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives |
| EN 818-4:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 |
| EN 14010:2003+A1:2009 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| EN 1677-1:2000+A1:2008 | Components for slings - Safety - Part 1: Forged steel components, Grade 8 |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| EN 1834-2:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| EN 931:1997+A2:2009 | Footwear manufacturing machines - Lasting machines - Safety requirements |
| EN 1677-2:2000+A1:2008 | Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 |
| EN 818-5:1999+A1:2008 | Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 |
| EN 13731:2007 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
| EN 14658:2005+A1:2010 | Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining |
| EN 1028-1:2002+A1:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements |
| EN 13852-2:2004 | Cranes - Offshore cranes - Part 2: Floating cranes |
| EN 13736:2003+A1:2009 | Safety of machine tools - Pneumatic presses |
| I.S. EN 13814:2005 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| 07/30158997 DC : 0 | BS EN 13731 - LIFTING BAG SYSTEMS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| 02/540287 DC : DRAFT MAR 2002 | BS EN 14373 - EXPLOSION SUPPRESSION SYSTEMS |
| I.S. EN 1870-1:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| I.S. EN ISO 8230:1998 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| 04/30122476 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| 03/306308 DC : DRAFT JUNE 2003 | EN 1005-5 - SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 5: RISK ASSESSMENT FOR REPETITIVE HANDLING AT HIGH FREQUENCY |
| 98/265367 DC : DRAFT DEC 1998 | BS EN 1005-4 - SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURE IN RELATION TO MACHINERY |
| 03/116398 DC : DRAFT OCT 2003 | BS EN 13411-7 - TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| 09/30198357 DC : 0 | BS EN 13411-4 - TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING |
| 03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
| 03/306594 DC : DRAFT APR 2003 | BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE |
| 03/306595 DC : 0 | BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| 98/717506 DC : DRAFT DEC 1998 | PREN 13389 - FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 14439 : DRAFT 2014 | CRANES - SAFETY - TOWER CRANES |
| DIN EN 415-8:2011-06 | Safety of packaging machines - Part 8: Strapping machines; German version EN 415-8:2008 |
| I.S. EN 12417:2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| 04/30123607 DC : DRAFT OCT 2004 | EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| 13/30265319 DC : 0 | BS EN 14973 - CONVEYOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS |
| 08/30180969 DC : DRAFT APR 2008 | BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES |
| 00/717064 DC : DRAFT NOV 2000 | PREN 14070 - SAFETY OF MACHINES TOOLS - TRANSFER AND SPECIAL PURPOSE MACHINES |
| 05/30135286 DC : 0 | EN 15268 - PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND PERFORMANCE OF SUBMERSIBLE PUMP ASSEMBLIES |
| 14/30297213 DC : 0 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| BS EN 50374:2004 | Conductor cars |
| 03/104284 DC : DRAFT FEB 2003 | EN 1672-2 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS |
| 06/30156491 DC : 0 | BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONES - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| 06/30147145 DC : 0 | EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES |
| 00/708470 DC : DRAFT APR 2000 | PREN 13886 - FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH STIRRER AND/OR MIXER - SAFETY AND HYGIENE |
| 07/30164729 DC : 0 | BS EN 12999 - CRANES - LOADER CRANES |
| PREN 1005-4 : DRAFT 1998 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES IN RELATION TO MACHINERY |
| BS ISO 4413:1998 | Hydraulic fluid power. General rules relating to systems |
| 05/19981969 DC : DRAFT JUN 2005 | BS EN 1034-5 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
| 02/711304 DC : DRAFT SEP 2002 | BS EN 415-5 - PACKAGING MACHINES SAFETY - PART 5: WRAPPING MACHINES |
| 03/311404 DC : 0 | IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| 04/30113842 DC : DRAFT MAY 2004 | PREN 14957 - FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1010-5:2005-10 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board |
| NF EN 12649 : 2008 + A1 2011 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| EN 13684:2004+A3:2009 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
| I.S. EN 415-8:2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| GOST R EN 818-2 : 2005 | SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE STEEL CHAINS FOR GRADE 8 CHAIN SLINGS |
| GOST R EN 818-4 : 2005 | SHORT LINK CHAINS FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS GRADE 8 |
| EN 13000:2010+A1:2014 | Cranes - Mobile cranes |
| EN 12312-8:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms |
| DIN EN 619:2011-02 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads (includes Amendment A1:2010) |
| DIN EN 12629-5-2:2011-02 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis (includes Amendment 2:2010) |
| DIN EN 12629-5-3:2011-02 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines (includes Amendment 3:2010) |
| S.R. CR 954-100:1999 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 100: GUIDE ON THE USE AND APPLICATION OF EN 954-1:1996 |
| I.S. EN 676:2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| NF EN 12312-5 : 2005 + A1 2010 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| BS EN 13120:2009+A1:2014 | Internal blinds. Performance requirements including safety |
| DIN EN 1028-1:2008-09 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements (includes Amendment A1:2008) |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 13135-2:2011-07 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| DIN EN 12198-3:2008-11 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING |
| DIN EN 1501-2:2010-02 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles (includes Amendment A1:2009) |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| DIN EN 81-3:2011-06 | Safety rules for the construction und installation of lifts - Part 3: Electric and hydraulic service lifts (includes Amendment A1:2008 + Corrigendum AC:2009) |
| UNE-EN 1175-2:1998 | SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. |
| BS EN ISO 10472-4:2008 | Safety requirements for industrial laundry machinery Air dryers |
| BS EN 13852-2:2004 | Cranes. Offshore cranes Floating cranes |
| BS EN 81-3 : 2003 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
| ISO 10472-3:1997 | Safety requirements for industrial laundry machinery Part 3: Washing tunnel lines including component machines |
| DIN EN 1889-2:2009-07 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| BS EN 12629-5-2 : 2003 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-2: PIPE MAKING MACHINES MANUFACTURING IN THE HORIZONTAL AXIS |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 692 : 2005 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| EN 12312-15:2006+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors |
| BS EN 1492-1 : 2000 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| BS EN 15198:2007 | Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
| BS EN 13814:2004 | Fairground and amusement park machinery and structures. Safety |
| EN ISO 11553-1:2008 | Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
| BS EN 12312-10 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 10: CONTAINER/PALLET TRANSFER TRANSPORTERS |
| 10/30216944 DC : 0 | BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| BS EN ISO 11553-1:2008 | Safety of machinery. Laser processing machines General safety requirements |
| BS EN 12629-5-3 : 2003 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-3: PIPE PRESTRESSING MACHINES |
| BS EN 81-70:2003 | Safety rules for the construction and installation of lifts Particular applications for passenger and goods passenger lifts. Accessibility to lifts for persons including persons with disability |
| BS EN 1677-2 : 2000 | COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8 |
| BS EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery Common requirements |
| BS EN 1034-22 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS |
| BS EN 13411-3 : 2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING |
| BS EN 1757-3:2002 | Safety of industrial trucks. Pedestrian propelled trucks Platform trucks |
| BS EN ISO 8230:1998 | Safety requirements for dry-cleaning machines using perchloroethylene |
| BS EN 818-6 : 2000 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| BS EN 1804-2 : 2001 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS |
| BS EN 14658 : 2005 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING |
| BS EN 1870-14 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| BS EN 1677-6 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| BS EN 1870-1 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| BS EN 1005-3 : 2002 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION |
| BS EN 12312-7 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIR-CRAFT MOVEMENT EQUIPMENT |
| ISO 8230:1997 | Safety requirements for dry-cleaning machines using perchloroethylene |
| BS EN 1552:2003 | Underground mining machines. Mobile extracting machines at the face. Safety requirements for shearer loaders and plough systems |
| 17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| BS EN 1005-2 : 2003 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| EN 12460:1998 | Biotechnology - Large-scale process and production - Guidance on equipment selection and installation in accordance with the biological risk |
| DIN EN 12635:2009-02 | Industrial, commercial and garage doors and gates - Installation and use (includes Amendment A1:2008) |
| EN 1034-22:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders |
| DIN EN 13411-6:2009-04 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| EN 13135-1:2003+A1:2010 | Cranes - Equipment - Part 1: Electrotechnical equipment |
| EN 12635:2002+A1:2008 | Industrial, commercial and garage doors and gates - Installation and use |
| EN 12312-16:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment |
| DIN EN 13411-2:2009-02 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 2: SPLICING OF EYES FOR WIRE ROPE SLINGS |
| EN 12415:2000/A1:2002 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| EN 12629-6:2004+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
| EN 50308 : 2004 COR 2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| DIN EN 14373:2006-01 | Explosion suppression systems |
| UNI EN 1756-1 : 2008 | TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS |
| ONORM EN 13411-7 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| EN 12321:2003+A1:2009 | Underground mining machinery - Specification for the safety requirements of armoured face conveyors |
| DIN EN 574:2008-12 | SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| UNI EN 620 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR FIXED BELT CONVEYORS FOR BULK MATERIALS |
| EN 12385-8:2002 | Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
| EN 1034-4:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities |
| DIN EN 12312-1:2001-12 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 1: PASSENGER STAIRS |
| EN 12385-7:2002 | Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts |
| EN 13414-2:2003+A2:2008 | Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
| EN 13414-3:2003+A1:2008 | Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings |
| DIN EN 81-1:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| DIN EN 81-1:2010-06 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| I.S. EN 14373:2005 | EXPLOSION SUPPRESSION SYSTEMS |
| DIN EN 13898:2009-09 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| EN 12957:2001+A1:2009 | Machine tools - Safety - Electro discharge machines |
| DIN EN 13411-1:2009-02 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| EN 12840 : 2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
| EN 1501-2:2005+A1:2009 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
| DIN EN 13411-7:2009-04 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket (includes Amendment A1:2008) |
| DIN EN 12151:2008-05 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| EN 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
| EN 1501-3:2008 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
| EN 13478:2001+A1:2008 | Safety of machinery - Fire prevention and protection |
| DIN EN 81-2:2010-08 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| UNI EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
| DIN EN 818-4:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| UNE-EN 415-3:2000 | Safety of packaging machines. Part 3: Form, fill and seal machines. |
| UNE-EN 1034-5:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
| UNE-EN 1804-1:2003 | Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 1: Support units and general requiremetns. |
| ONORM EN 1010-5 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD |
| UNE-EN 1034-2:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums |
| UNE-EN 1804-2:2003 | Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 2: Power set legs and rams. |
| UNE-EN 12629-6:2005 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
| UNE-EN 12757-1:2006+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| UNE-EN 1501-2:2006 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
| UNE-EN 1034-22:2006 | Safety of machinerie - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders |
| UNE-EN 15011:2011 | Cranes - Bridge and gantry cranes |
| UNE-EN 12629-7:2005 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
| UNE-EN 1010-4:2004 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
| UNE-EN 12757-1:2006 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| UNE-EN 415-5:2007 | Safety of packaging machines - Part 5: Wrapping machines |
| UNE-EN 14658:2006 | Continuous handling equipment and systems. General safety requirements for continuous handling equipment for opencast lignite mining |
| UNE-EN 1010-3:2003 | Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Part 3: Cutting machines. |
| UNE-EN 500-1:2007 | Mobile road construction machinery - Safety - Part 1: Common requirements |
| UNE-EN 1034-6:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender |
| UNE-EN 1034-7:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests |
| UNE-EN 1804-3:2007 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
| UNE-EN 1034-4:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.