EN ISO 228-1:2003
Current
Current
The latest, up-to-date edition.
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
Published date
19-02-2003
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative reference
3 Symbols
4 Dimensions
5 Designation
6 Combination with jointing thread
Annex A (informative) References to European standards
Bibliography
This part of ISO 228 specifies the requirements for thread form, dimensions, tolerances and designation forfastening pipe threads, thread sizes 1/16 to 6 inclusive. Both internal and external threads are parallel threads,intended for the mechanical assembly of the component parts of fittings, cocks and valves, accessories, etc.These threads are not suitable as jointing threads where a pressure-tight joint is made on the thread. If assemblieswith such threads must be made pressure-tight, this should be effected by compressing two tightening surfacesoutside the threads, and by interposing an appropriate seal.NOTE 1 For pipe threads where pressure-tight joints are made on the threads, see ISO 7-1.NOTE 2 ISO 228-2 gives details of methods for verification of fastening thread dimensions and form, and recommendedgauging systems.
| Committee |
CEN/TC 459/SC 10
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN ISO 228-1:2003 | Identical |
| NBN EN 1488 : 2000 | Identical |
| PN EN ISO 228-1 : 2005 | Identical |
| NF EN ISO 228-1 : 2003 | Identical |
| NBN EN 1489 : 2000 | Identical |
| SS-EN ISO 228-1 : 2003 | Identical |
| I.S. EN ISO 228-1:2003 | Identical |
| ISO 228-1:2000 | Identical |
| NS EN ISO 228-1 : 1ED 2003 | Identical |
| DIN EN ISO 228-1:2003-05 | Identical |
| NBN EN 1491 : 2000 | Identical |
| NBN EN ISO 228-1 : 2003 | Identical |
| NBN EN 1490 : 2000 | Identical |
| NEN EN ISO 228-1 : 2003 | Identical |
| UNE-EN ISO 228-1:2003 | Identical |
| NF EN 15624 : 2009 + A1 2010 | RAILWAY APPLICATIONS - BRAKING - EMPTY-LOADED CHANGEOVER DEVICES |
| DIN EN 13547:2013-12 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 10/30234318 DC : DRAFT DEC 2010 | BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| 15/30321799 DC : 0 | BS EN 1287 - SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATIONS |
| PREN 416 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| I.S. EN 60335-2-75:2004 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| 10/30219414 DC : 0 | BS EN 13617-4 - PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS |
| 10/30228056 DC : 0 | |
| 13/30268239 DC : 0 | BS EN 1487 - BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| 16/30346577 DC : 0 | BS EN 1305 - INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF OILY MIXTURE |
| 12/30261215 DC : 0 | BS EN 13060 - SMALL STEAM STERILIZERS |
| DIN 16282:2004-07 | SIPHONS FOR PRESSURE GAUGES AND THEIR ACCESSORIES |
| 16/30341197 DC : 0 | BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| 11/30243885 DC : 0 | BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| 04/30103162 DC : DRAFT MARCH 2004 | EN 12094-5 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5 - REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALUES AND THEIR ACTUATORS |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| PREN 1305 : DRAFT 2016 | INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF OILY MIXTURE |
| PREN 1487 : DRAFT 2012 | BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| BS EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| BS EN 16617:2015 | Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking |
| BS EN 16146 : 2012 | SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| BS EN 15502-1 : 2012 | GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| 14/30291756 DC : 0 | BS EN 1434-2 - HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| I.S. EN 16722:2015 | INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH THREADED ENDS |
| PREN 14180 : DRAFT 2012 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN 16272:2004-07 | PN 250 and PN 400 valves with shut-off test connection for pressure gauges |
| 06/30153867 DC : 0 | BS EN 1112 - SANITARY TAPWARE - SHOWER OUTLETS FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| DIN 16284:2004-07 | Nipple connections for pressure gauges and their accessories |
| 10/30234604 DC : 0 | BS EN 14424 - HOSE FITTINGS WITH SCREWED FERRULES |
| 10/30234616 DC : 0 | BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| 07/30163662 DC : 0 | BS EN 778 - DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| BS EN 15612 : 2008 | RAILWAY APPLICATIONS - BRAKING - BRAKE PIPE ACCELERATOR VALVE |
| BS EN 15767-2:2009 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitors Water nozzles |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| BS EN 14829:2007 | Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW |
| PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS EN 15625 : 2008 | RAILWAY APPLICATIONS - BRAKING - AUTOMATIC VARIABLE LOAD SENSING DEVICES |
| 14/30301577 DC : 0 | BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| 13/30287842 DC : 0 | BS EN 14543 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE |
| BS EN 60730-2-19 : 2002 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-19: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED OIL VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| BS EN 1306:1996 | Inland navigation vessels. Connections for the discharge of waste water |
| DD CEN/TS 13547:2006 | Industrial valves. Copper alloy ball valves |
| 05/30132377 DC : DRAFT APR 2005 | EN 15219 - WATER EQUIPMENT INSIDE BUILDINGS - NITRATE REMOVAL DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| BS EN 13565-1 : 2003 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| PREN 13060 : DRAFT 2012 | SMALL STEAM STERILIZERS |
| PREN 624 : DRAFT 2009 | SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| PREN 13618 : DRAFT 2009 | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| PREN 1287 : DRAFT 2015 | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| PREN 13012 : DRAFT 2010 | PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS |
| BS EN 60335-2-75 : 2004 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| BS EN 15611 : 2008 | RAILWAY APPLICATIONS - BRAKING - RELAY VALVES |
| I.S. EN 15420:2010 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
| BS EN 15624 : 2008 | RAILWAY APPLICATIONS - BRAKING - EMPTY-LOADED CHANGEOVER DEVICES |
| I.S. EN 13547:2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. EN 13565-1:2004 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| DIN EN 1287:2015-07 (Draft) | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 15502-1:2012 | GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 17/30363956 DC : 0 | BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| NF EN 15714-4 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| EN 13012:2012 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| EN 15202:2012 | LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| I.S. EN 15202:2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| I.S. EN 215:2004 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN ISO 15875-3:2004-03 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003) |
| DIN EN 416-1:2009-09 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| DIN EN 777-1:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| DIN EN 13709:2010-10 | Industrial valves - Steel globe and globe stop and check valves |
| DIN EN 13434:2006-05 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G - TYPE B |
| DIN EN 13433:2006-05 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G - TYPE A |
| DIN EN 1124-2:2014-08 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: SYSTEM S, FORMS AND DIMENSIONS |
| DIN EN 26:2015-08 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| DIN EN 777-3:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| EN 13617-4:2012 | Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| DIN EN 777-2:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| BS EN ISO 10806:2003 | Pipework. Fittings for corrugated metal hoses |
| BS EN 13785 : 2005 | REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| BS EN 15091:2013 | Sanitary tapware. Electronic opening and closing sanitary tapware |
| BS EN 14454:2005 | Devices to prevent pollution by backflow of potable water. Hose union backflow preventer DN 15 to DN 32 inclusive. Family H, type A |
| BS EN 12094-2:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices |
| BS EN 14743 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - SOFTENERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| BS EN 624:2011 | Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats |
| BS EN 817:2008 | Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications |
| BS EN 12806:2003 | Automotive liquefied petroleum gas components. Other than containers |
| BS EN 14420-5:2013 | Hose fittings with clamp units Threaded connections |
| BS EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety |
| BS EN 14267:2004 | Irrigation techniques. Irrigation hydrants |
| BS EN 13786 : 2004 | AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| BS EN 14714:2005 | Inland navigation vessels. Connection nozzle for equipment and devices at cargo tanks. Dimensions |
| BS EN 14453:2005 | Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20. Family D, type C |
| BS EN 303-5:2012 | Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
| DIN EN 15091:2014-03 | Sanitary tapware - Electronic opening and closing sanitary tapware |
| BS EN 15202:2012 | LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| BS EN 12094-8:2006 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors |
| BS EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| BS EN 419-1:2009 | Non-domestic gas-fired overhead luminous radiant heaters Safety |
| BS EN 13433:2007 | Devices to prevent pollution by backflow of potable water. Mechanical disconnector, direct actuated. Family G, type A |
| BS EN 13025-1:2005 | Packaging. Light gauge metal containers Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml |
| BS EN 14367:2005 | Non controllable backflow preventer with different pressure zones. Family C, type A |
| BS EN 14420-7:2013 | Hose fittings with clamp units Cam locking couplings |
| I.S. EN 14812:2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| I.S. EN 12288:2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| I.S. EN 14424:2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| DIN EN 200:2008-10 | Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification; German version EN 200:2008 |
| EN 12094-5:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
| DIN EN 15033:2007-02 | Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats |
| I.S. EN 10242:1995 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves |
| EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| EN 1112:2008 | Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification |
| EN 13278:2013 | Open fronted gas-fired independent space heaters |
| DIN EN 14543:2017-10 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE |
| EN 13443-1:2002+A1:2007 | Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| EN 30-1-1:2008+A3:2013 | Domestic cooking appliances burning gas - Part 1-1: Safety - General |
| DIN EN 562:2003-09 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| EN 1111:2017 | Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
| EN 13433:2006 | Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A |
| DIN EN 14367:2005-10 | Non controllable backflow preventer with different pressure zones - Family C, type A |
| EN 1287:2017 | Sanitary tapware - Low pressure thermostatic mixing valves - General technical specification |
| EN 13547:2013 | Industrial valves - Copper alloy ball valves |
| EN 12806:2003 | Automotive liquefied petroleum gas components - Other than containers |
| DIN EN 1287:2017-10 | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| EN 1349:2009 | Industrial process control valves |
| DIN EN 816:2017-10 | SANITARY TAPWARE - AUTOMATIC SHUT-OFF VALVES PN 10 |
| DIN EN 1111:2017-10 | SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 14453:2005-08 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C; German version EN 14453:2005 |
| EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
| EN 12094-2:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
| EN 1113:2015 | Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification |
| EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
| EN 12094-8:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
| EN 12094-6:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices |
| CEN/TS 13547:2006 | Industrial valves - Copper alloy ball valves |
| EN 1124-2:2014 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions |
| DIN EN ISO 16330:2004-08 | Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003) |
| BS EN 1349:2009 | Industrial process control valves |
| ONORM EN 14785 : 2006 | RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| DIN EN 15420:2011-03 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1 000 KW |
| PREN 14543 : DRAFT 2013 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE |
| PREN 13774 : DRAFT 2011 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| PREN 498 : DRAFT 2009 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - BARBECUES FOR OUTDOOR USE CONTACT GRILLS INCLUDED |
| BS EN 560:2005 | Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes |
| DIN 16263:2004-07 | PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges |
| 04/30103157 DC : DRAFT MARCH 2004 | BS EN 12094-8 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8 - REQUIREMENTS AND TEST METHODS FOR FLEXIBLE CONNECTORS |
| 13/30280712 DC : 0 | BS EN 1111 - SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| 13/30281974 DC : 0 | BS EN 16617 - PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| BS EN 14506:2005 | Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C |
| 10/30234625 DC : 0 | BS EN 14420-1 - HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| 12/30262894 DC : 0 | BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| BS EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| 15/30328393 DC : 0 | BS EN 816 - SANITARY TAPWARE - AUTOMATIC SHUT-OFF VALVES PN 10 |
| I.S. EN 13025-1:2005 | PACKAGING - LIGHT GAUGE METAL CONTAINERS - PART 1: NOMINAL FILLING VOLUMES FOR ROUND, CYLINDRICAL AND TAPERED GENERAL USE METAL CONTAINERS UP TO 40 000 ML |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| 10/30234631 DC : 0 | BS EN 14420-8 - HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| 14/30296044 DC : 0 | BS EN 16722 - INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH SCREWED ENDS |
| NF EN 15420 : 2012 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
| 06/30148043 DC : 0 | EN 88-2 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR |
| PREN 16129 : DRAFT 2010 | PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 100 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| DIN EN 16145:2013-03 | Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification |
| PREN 17175 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| PREN 13709 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| PREN 1984 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| 02/703662 DC : DRAFT FEB 2002 | PREN 10226-2 - PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE MADE ON THE THREADS - PART 2: TAPER EXTERNAL THREADS AND TAPER INTERNAL THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION |
| 12/30257298 DC : 0 | BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| BS EN 15714-3:2009 | Industrial valves. Actuators Pneumatic part-turn actuators for industrial valves. Basic requirements |
| 03/111126 DC : DRAFT JULY 2003 | PREN 60335-2-75 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| 09/30201902 DC : 0 | BS EN 624 - SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| DD CEN/TS 14421:2006 | Hose tail and ferrule for crimping and swaging |
| CEI CLC/TS 50537-4 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 4: GAS AND LIQUID ACTUATED (BUCHHOLZ) RELAY FOR LIQUID IMMERSED TRANSFORMERS AND REACTORS WITH CONSERVATOR FOR RAIL VEHICLES |
| BS EN 13618:2016 | Flexible hose assemblies in drinking water installations. Functional requirements and test methods |
| DIN 16262:2004-07 | PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges |
| 13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| DIN EN 16617:2015-07 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| 09/30201899 DC : 0 | BS EN 1949 - SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| I.S. EN 15092:2008 | BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
| PREN 12309-2 : DRAFT 2013 | GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| BS EN 50465:2015 | European product standard for combined heating power systems using gas fuel |
| 09/30202310 DC : 0 | BS EN 12514-2 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS |
| DIN EN 15807:2011-05 | Railway applications - Pneumatic half couplings |
| PREN 1306 : DRAFT 2016 | INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF WASTE WATER |
| I.S. EN 16436-1:2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| 17/30350901 DC : 0 | BS EN 215 - THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| EN 1434-2:2015 | Heat meters - Part 2: Constructional requirements |
| I.S. EN 16617:2015 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| PREN 30-1-1 : DRAFT 2017 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
| I.S. EN 14829:2007 | INDEPENDENT GAS-FIRED FLUELESS SPACE HEATERS FOR NOMINAL HEAT INPUT NOT EXCEEDING 6 KW |
| I.S. EN 14506:2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - AUTOMATIC DIVERTER - FAMILY H, TYPE C |
| I.S. EN 16145:2012 | SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION |
| PREN 50465 : DRAFT 2011 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| EN 50465 : 2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| EN 16436-1:2014+A1:2015 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| EN 13565-1:2003+A1:2007 | Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| I.S. EN 50465:2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| DIN EN 203-1:2014-07 | Gas heated catering equipment - Part 1: General safety rules |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| DIN EN 1113:2015-06 | SANITARY TAPWARE - SHOWER HOSES FOR SANITARY TAPWARE FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 12288:2010-10 | Industrial valves - Copper alloy gate valves |
| DIN EN 1359:2007-06 | GAS METERS - DIAPHRAGM GAS METERS |
| DIN EN ISO 228-2:2003-05 | PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - PART 2: VERIFICATION BY MEANS OF LIMIT GAUGES |
| DIN EN 1020:2010-05 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| DIN EN 1319:2010-06 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| DIN EN 89:2015-08 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| DIN EN 1112:2008-06 | SANITARY TAPWARE - SHOWER OUTLETS FOR SANITARY TAPWARE FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 13617-4:2012-05 | Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| DIN EN 1984:2010-10 | Industrial valves - Steel gate valves |
| DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
| DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 14268:2005-11 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| DIN EN 303-5:2012-10 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| DIN EN 14422:2013-09 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| DIN EN 14267:2004-10 | Irrigation techniques - Irrigation hydrants |
| DIN EN 14424:2013-09 | HOSE FITTINGS WITH SCREWED FERRULES |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 12288:2010 | Industrial valves. Copper alloy gate valves |
| BS EN ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Fittings |
| BS EN 10242:1995 | Threaded pipe fittings in malleable cast iron |
| BS EN 1112:2008 | Sanitary tapware. Shower outlets for sanitary tapware for water supply systems type 1 and type 2. General technical specification |
| BS EN 26:1998 | Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners |
| 04/30124785 DC : 0 | EN 15069 - SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| BS EN 14595:2005 | Tanks for transport of dangerous goods. Service equipment for tanks. Pressure and vacuum breather vent |
| BS EN 14812 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| BS EN 13443-1:2002 | Water conditioning equipment inside buildings. Mechanical filters Particle rating 80 μm to 150 μm. Requirements for performances, safety and testing |
| BS EN 498:2012 | Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use contact grills included |
| BS EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads Taper external threads and parallel internal threads. Dimensions, tolerances and designation |
| BS EN 1984:2010 | Industrial valves. Steel gate valves |
| BS EN 1555-3 : 2010 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS |
| BS EN 13709:2002 | Industrial valves. Steel globe and globe stop and check valves |
| I.S. EN 624:2011 | SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| DIN EN 1775:2007-10 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| I.S. EN 14420-5:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| I.S. EN 13278:2013 | OPEN FRONTED GAS-FIRED INDEPENDENT SPACE HEATERS |
| I.S. EN 30-1-1:2008 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
| I.S. EN 14420-6:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
| EN ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003) |
| I.S. EN 13774:2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| I.S. EN 14652:2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| EN 15807:2011 | Railway applications - Pneumatic half couplings |
| DIN EN 1487:2000-06 | BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| I.S. EN 817:2008 | SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS |
| I.S. EN 13012:2012 | PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS |
| DIN EN 14420-1:2013-09 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| I.S. EN 13617-4:2012 | PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS |
| I.S. EN 14420-8:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| DIN EN ISO 10806:2004-03 | Pipework - Fittings for corrugated metal hoses (ISO 10806:2003) |
| I.S. EN 1111:2017 | SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 14420-8:2016-06 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| I.S. EN 1113:2015 | SANITARY TAPWARE - SHOWER HOSES FOR SANITARY TAPWARE FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 1124-2:1999-04 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: SYSTEM S, FORMS AND DIMENSIONS |
| I.S. EN 1555-3:2010 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS |
| I.S. EN 498:2012 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - BARBECUES FOR OUTDOOR USE CONTACT GRILLS INCLUDED |
| I.S. EN 14595:2016 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - PRESSURE AND VACUUM BREATHER VENT |
| I.S. EN 14543:2017 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 331:2015 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| I.S. EN 1112:2008 | SANITARY TAPWARE - SHOWER OUTLETS FOR SANITARY TAPWARE FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 12094-5:2006 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALVES AND THEIR ACTUATORS |
| I.S. EN 1984:2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| I.S. EN 26:2015 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| DIN EN 14420-7:2013-09 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| DIN EN 1983:2013-12 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| DIN EN 14420-5:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| I.S. EN 14422:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| I.S. EN 203-1:2014 | GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES |
| DIN EN 12094-8:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
| I.S. EN 12094-6:2006 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 6: REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL DISABLE DEVICES |
| I.S. EN 13617-2:2012 | PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS |
| I.S. EN 200:2008 | SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 1359:2017 | GAS METERS - DIAPHRAGM GAS METERS |
| I.S. EN ISO 15875-3:2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 3: FITTINGS |
| EN 15625:2008+A1:2010 | Railway applications - Braking - Automatic variable load sensing devices |
| I.S. EN 15091:2013 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| I.S. EN 1983:2013 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| I.S. EN 14180:2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN 15219:2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - NITRATE REMOVAL DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| I.S. EN 13434:2006 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G, TYPE B |
| I.S. EN 14743:2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - SOFTENERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| I.S. EN 1124-2:2014 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: SYSTEM S, FORMS AND DIMENSIONS |
| I.S. EN 1349:2009 | INDUSTRIAL PROCESS CONTROL VALVES |
| DIN EN 14420-6:2013-09 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| I.S. EN 816:2017 | SANITARY TAPWARE - AUTOMATIC SHUT-OFF VALVES PN 10 |
| I.S. EN 303-5:2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| DIN EN 14180:2003-10 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN 14394:2006 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| I.S. EN 12561-2:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| I.S. EN 12309-2:2015 | GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| I.S. EN 1458-1:2011 | DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
| EN 15624:2008+A1:2010 | Railway applications - Braking - Empty-loaded changeover devices |
| I.S. EN 13709:2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| I.S. EN 13443-1:2002 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 MICROMETER TO 150 MICROMETER - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
| DIN EN ISO 15874-3:2004-03 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 3: FITTINGS |
| I.S. EN 1487:2014 | BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| I.S. EN 13433:2006 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G, TYPE A |
| I.S. EN 14420-7:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| I.S. EN 89:2015 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| I.S. EN 1287:2017 | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 1775:2007 | GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| I.S. EN 12094-8:2006 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
| I.S. EN 14420-1:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
| I.S. EN 88-2:2007 | PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR |
| VDI/VDE 3847 Blatt 1:2013-07 | Industrial process control valves - Interface between valve and positioner - Control valves with lifting actuator |
| I.S. EN 12806:2003 | AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS |
| VDI/VDE 3847 Blatt 2:2016-10 | Industrial process control valves - Interface between valve and positioner - Control valves with rotary actuator |
| VDI/VDE 3845 Blatt 1:2010-09 | Industrial process control - Pneumatic control valves - Interfaces of valves and auxiliary equipment |
| NF EN 12806 : 2003 | AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| EN 1306:2018 | Inland navigation vessels - Connections for the discharge of waste water |
| BS EN 15807:2011 | Railway applications. Pneumatic half couplings |
| 04/30118763 DC : DRAFT AUG 2004 | PREN 12335 - INDUSTRIAL VALVES - CAST IRON PLUG VALVES |
| BS EN 15092:2008 | Building valves. Inline hot water supply tempering valves. Tests and requirements |
| 14/30297539 DC : 0 | BS EN 14595 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - PRESSURE AND VACUUM BREATHER DEVICE |
| 10/30219402 DC : 0 | BS EN 13012 - PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS |
| BS EN 15714-4:2009 | Industrial valves. Actuators Hydraulic part-turn actuators for industrial valves. Basic requirements |
| I.S. EN 285:2015 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| 06/30103169 DC : 0 | EN 12094-7 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 7: REQUIREMENTS AND TEST METHODS FOR NOZZLES |
| 09/30207446 DC : 0 | BS EN 498 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - BARBECUES FOR OUTDOOR USE CONTACT GRILLS INCLUDED |
| BS EN 16313:2013 | Connections for heating and cooling appliances. Detachable connection with outside threaded pipe G ¾ A and inside cone |
| 08/30163745 DC : DRAFT SEP 2008 | BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| EN 1305:2018 | Inland navigation vessels - Connections for the discharge of oily mixture |
| 10/30228907 DC : 0 | BS EN 16145 - SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION |
| 15/30321802 DC : 0 | BS EN 1111 - SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| BS EN 16767:2016 | Industrial valves. Steel and cast iron check valves |
| 10/30218092 DC : 0 | BS EN 15502-1 - GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 06/30149018 DC : 0 | EN 15502-1 - GAS-FIRED CENTRAL HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| I.S. EN 15714-4:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| NF EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 04/30122632 DC : DRAFT SEP 2004 | CEN/BT/TF 158 N13 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 10: CONNECTORS FOR TAPPING UNITS OF BEVERAGE DISPENSING SYSTEMS, MATING DIMENSIONS |
| DIN EN 15096:2008-04 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
| BS EN 50193-1:2013 | Electric instantaneous water heaters General requirements |
| BS EN 16865:2016 | Inland navigation vessels. Connections and assembled hoses for the transfer of potable water |
| 09/30205883 DC : 0 | BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| 11/30247545 DC : 0 | BS EN 16313 - CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G [3/4] A AND INSIDE CONE |
| BS EN 806-4:2010 | Specifications for installations inside buildings conveying water for human consumption Installation |
| 12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
| DIN CEN/TS 13547:2007-02 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 12/30249755 DC : DRAFT JULY 2012 | BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - GENERAL REQUIREMENTS |
| 09/30205880 DC : DRAFT OCT 2009 | BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| DIN EN 15420 E : NOV 2011 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
| NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| 12/30258147 DC : 0 | BS EN 203-1 - GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES |
| 16/30333511 DC : 0 | BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
| PREN 1949 : DRAFT 2009 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| I.S. EN 16313:2013 | CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE |
| PREN 560 : DRAFT 2017 | GAS WELDING EQUIPMENT - HOSE CONNECTIONS FOR EQUIPMENT FOR WELDING, CUTTING AND ALLIED PROCESSES |
| 15/30325369 DC : 0 | BS EN 484 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE |
| EN 13060:2014 | Small steam sterilizers |
| I.S. EN 16865:2016 | INLAND NAVIGATION VESSELS - CONNECTIONS AND ASSEMBLED HOSES FOR THE TRANSFER OF POTABLE WATER |
| I.S. EN 16767:2016 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
| DIN EN 1434-2:2016-02 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| CLC/TS 50537-4:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 4: Gas and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles |
| NF EN 806-4 : 2010 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
| EN 1555-3:2010+A1:2012 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
| DIN EN 13565-1:2016-08 (Draft) | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| I.S. CEN TS 13547:2006 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. EN 15096:2008 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 15625:2008 | RAILWAY APPLICATIONS - BRAKING - AUTOMATIC VARIABLE LOAD SENSING DEVICES |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| DIN EN 14451:2005-08 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 13617-2:2012-05 | Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| DIN EN 13443-1:2007-12 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
| DIN EN 1487:2014-09 | BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| DIN EN 1555-3:2013-01 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings (includes Amendment A1:2012) |
| DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
| DIN EN 817:2008-09 | Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications |
| DIN EN 816:2015-11 (Draft) | SANITARY TAPWARE - AUTOMATIC SHUT-OFF VALVES PN 10 |
| DIN EN 676:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| DIN EN 13785:2010-05 | REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| DIN EN 13786:2010-07 | AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| DIN EN 331:2016-04 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN 14543:2013-11 (Draft) | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE |
| DIN EN 14394:2008-12 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| BS EN 13617-4:2012 | Petrol filling stations Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| BS EN 1124-2:2014 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems System S, forms and dimensions |
| BS EN 14451:2005 | Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D, type A |
| BS EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
| BS EN 13012:2012 | Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers |
| BS EN 525:2009 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| BS EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| DIN EN 676:2008-11 | Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008) |
| DIN EN 14743:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - SOFTENERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| DIN EN 14785:2006-09 | Residential space heating appliances fired by wood pellets - Requirements and test methods |
| I.S. EN 777-4:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| EN 15096:2008 | Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification |
| EN 14451:2005 | Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A |
| I.S. EN 525:2009 | NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| I.S. EN 777-2:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| I.S. EN 416-1:2009 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| I.S. EN 777-3:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| I.S. EN 1319:2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| ONORM EN 676 : 2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| I.S. EN 14451:2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
| I.S. EN 419-1:2009 | NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY |
| EN 15612:2008+A1:2010 | Railway applications - Braking - Brake pipe accelerator valve |
| ONORM EN 14451 : 2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
| I.S. EN 621:2009 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| I.S. EN 778:2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| I.S. EN 1020:2009 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| I.S. EN 777-1:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| EN 50465:2015 | Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW |
| I.S. EN 15807:2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| DIN EN 15611:2011-01 | RAILWAY APPLICATIONS - BRAKING - RELAY VALVES |
| PREN 484 : DRAFT 2015 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE |
| PREN 50193-1 : DRAFT 2016 | ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 16145:2012 | Sanitary tapware. Extractable outlets for sink and basin mixers. General technical specification |
| I.S. EN 562:2003 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| PREN 14424 : DRAFT 2010 | HOSE FITTINGS WITH SCREWED FERRULES |
| DD CLC/TS 50537-4:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Gas and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles |
| 04/30103167 DC : DRAFT MARCH 2004 | BS EN 12094-6 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 6 - REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL DISABLE DEVICES FOR CO2 SYSTEMS |
| PREN 1434-2 : DRAFT 2014 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| NF EN 15612 : 2009 + A1 2010 | RAILWAY APPLICATIONS - BRAKING - BRAKE PIPE ACCELERATOR VALVE |
| 09/30205877 DC : 0 | BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES |
| BS EN 13547:2013 | Industrial valves. Copper alloy ball valves |
| 10/30219408 DC : 0 | BS EN 13617-2 - PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS |
| 11/30238482 DC : 0 | BS EN 1458-1 - DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
| 07/30160488 DC : DRAFT FEB 2007 | BS EN 13443-1 AMD 1 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
| 16/30346574 DC : 0 | BS EN 1306 - INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF WASTE WATER |
| 12/30260007 DC : 0 | BS EN 15091 - SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| PREN 16617 : DRAFT 2013 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| PREN 13565-1 : DRAFT 2016 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| PREN 203-1 : DRAFT 2012 | GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES |
| PREN 419 : DRAFT 2017 | GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NONDOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| S.R. CEN/TS 16650:2014 | SPECIFICATION FOR HOSE COUPLINGS FOR PETROL, OIL AND LUBRICANTS - HIGH PRESSURE COUPLINGS |
| DIN EN 16313:2013-08 | Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G 3/4 A and inside cone |
| DIN EN 806-4:2010-06 | Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation |
| DIN 16271:2004-07 | PN 250 and PN 400 valves with test connection for pressure gauges |
| 17/30362705 DC : 0 | BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| PREN 14420-7 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| PREN 676 : DRAFT 2012 | FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| 09/30204183 DC : 0 | BS EN 88-1 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 500 MBAR |
| 07/30163045 DC : DRAFT AUG 2007 | BS EN 525 - NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| BS EN 16722:2015 | Industrial valves. End-to-end and centre-to-end dimensions for valves with threaded ends |
| 04/30126825 DC : DRAFT DEC 2004 | EN 15091 - SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| 09/30198696 DC : 0 | BS EN 13618 - FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| 08/30179182 DC : DRAFT MAY 2008 | BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
| NF EN 15611 : 2009 + A1 2010 | RAILWAY APPLICATIONS - BRAKING - RELAY VALVES |
| DIN EN 15502-1:2015-10 | Gas-fired heating boilers - Part 1: General requirements and tests (includes Amendment A1:2015) |
| DIN 16281:2004-07 | SUPPORT FOR MEASURING INSTRUMENTS AND FITTINGS |
| DIN EN 16146:2015-02 | Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification; German version EN 16146:2012+A1:2014 |
| DIN 19207:2004-02 | Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories |
| DIN EN 15714-4:2010-02 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| DIN 16270:2004-07 | PN 250 and PN 400 valves without test connection for pressure gauges |
| PREN 13617-2 : DRAFT 2010 | PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS |
| PREN 15091 : DRAFT 2012 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| I.S. EN 16146:2012 | SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| PREN 331 : DRAFT 2013 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| I.S. EN 15767-2:2009 | PORTABLE EQUIPMENT FOR PROJECTING EXTINGUISHING AGENTS SUPPLIED BY FIRE FIGHTING PUMPS - PORTABLE MONITORS - PART 2: WATER NOZZLES |
| PREN 12288 : DRAFT 2009 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| PREN 816 : DRAFT 2015 | SANITARY TAPWARE - AUTOMATIC SHUT-OFF VALVES PN 10 |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 13/30271701 DC : 0 | BS EN 16510-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| 17/30363959 DC : 0 | BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| CEI EN 50193-1 : 2015 | ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
| DIN EN 15625:2011-01 | Railway applications - Braking - Automatic variable load sensing devices (includes Amendment A1:2010) |
| PREN 16510-1 : DRAFT 2013 | RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. CEN TS 14421:2006 | HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING |
| EN 13617-2:2012 | Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| I.S. EN 806-4:2010 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
| I.S. EN 13618:2016 | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 1305:1996 | INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF OILY MIXTURE |
| I.S. EN 1306:1996 | INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF WASTE WATER |
| I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 13012:2012-09 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| DIN EN 10242:1995-03 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| DIN EN 525:2009-11 | NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| DIN EN 778:2010-03 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| DIN EN 215:2007-11 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| DIN EN 14180:2014-09 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| DIN EN 12094-8:2016-06 (Draft) | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
| DIN EN 88-2:2008-03 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| DIN EN 13774:2013-05 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| BS EN 778:2009 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| BS EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| BS EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements |
| BS EN 14394 : 2005 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| BS EN 12094-6:2006 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical disable devices |
| BS EN 14341:2006 | Industrial valves. Steel check valves |
| BS EN 14268:2005 | Irrigation techniques. Meters for irrigation water |
| EN 16767:2016 | Industrial valves - Steel and cast iron check valves |
| ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings |
| DIN EN 15219:2008-02 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - NITRATE REMOVAL DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| BS EN 215:2004 | Thermostatic radiator valves. Requirements and test methods |
| BS EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System E. Safety |
| BS EN 15219 : 2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - NITRATE REMOVAL DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| BS EN 12094-5:2006 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for high and low pressure selector valves and their actuators |
| BS EN 1487:2014 | Building valves. Hydraulic safety groups. Tests and requirements |
| BS EN 12561-2:2011 | Railway applications. Tank wagons Bottom emptying devices for liquid products including vapour return |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| BS EN 13836:2006 | Gas fired central heating boilers. Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW |
| BS EN 15033:2006 | Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats |
| EN 15611:2008+A1:2010 | Railway applications - Braking - Relay valves |
| 12/30250105 DC : 0 | BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012) |
| BS EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety |
| BS EN 1111:2017 | Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification |
| BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety |
| BS EN 14124:2004 | Inlet valves for flushing cisterns with internal overflow |
| BS EN 14420-1:2013 | Hose fittings with clamp units Requirements, types of fixing and connection, designation and testing |
| BS EN 14652 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| BS EN 12094-4:2004 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for container valve assemblies and their actuators |
| ISO 15493:2003 | Plastics piping systems for industrial applications — Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) — Specifications for components and the system — Metric series |
| BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
| BS EN 285:2015 | Sterilization. Steam sterilizers. Large sterilizers |
| DIN EN 12309-2:2016-04 | GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| DIN EN 15069:2010-07 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| BS EN 1113:2015 | Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification |
| BS EN 203-1:2014 | Gas heated catering equipment General safety rules |
| BS EN 806-2:2005 | Specifications for installations inside buildings conveying water for human consumption Design |
| BS EN 816:2017 | Sanitary tapware. Automatic shut-off valves PN 10 |
| BS EN 14154-1 : 2005 | WATER METERS - PART 1: GENERAL REQUIREMENTS |
| BS EN 14180:2014 | Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
| BS EN 676 : 2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| BS EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads Taper external threads and taper internal threads. Dimensions, tolerances and designation |
| BS EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| BS EN 14424:2013 | Hose fittings with screwed ferrules |
| BS EN 1983:2013 | Industrial valves. Steel ball valves |
| BS EN 13434:2006 | Devices to prevent pollution by backflow of potable water. Mechanical disconnector, hydraulic actuated. Family G, type B |
| BS EN 14785:2006 | Residential space heating appliances fired by wood pellets. Requirements and test methods |
| ISO 10806:2003 | Pipework — Fittings for corrugated metal hoses |
| BS EN 1287:2017 | Sanitary tapware. Low pressure thermostatic mixing valves. General technical specification |
| BS EN 14452:2005 | Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20. Family D, t ype B |
| BS EN 14420-6:2013 | Hose fittings with clamp units TW tank truck couplings |
| DIN EN 14455:2005-08 | Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B |
| DIN EN 10226-2:2005-11 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005 |
| EN ISO 10806:2003 | Pipework - Fittings for corrugated metal hoses (ISO 10806:2003) |
| EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
| EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| EN 14455:2005 | Devices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B |
| EN 1458-1:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety |
| EN 15092:2008 | Building valves - Inline hot water supply tempering valves - Tests and requirements |
| EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| EN 15767-2:2009 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 2: Water nozzles |
| EN 14543:2017 | Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use |
| EN 14785:2006 | Residential space heating appliances fired by wood pellets - Requirements and test methods |
| EN 14652:2005+A1:2007 | Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing |
| EN 14714:2005 | Inland navigation vessels - Connection nozzle for equipment and devices at cargo tanks - Dimensions |
| EN 14812:2005+A1:2007 | Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing |
| EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| EN 15420:2010 | Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW |
| EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| EN 14420-1:2013 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| EN 14394:2005+A1:2008 | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
| EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety |
| EN 13786:2004+A1:2008 | Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN 525:2009 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| EN 13709:2010 | Industrial valves - Steel globe and globe stop and check valves |
| EN 13785:2005+A1:2008 | Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| EN ISO 16330:2003 | Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003) |
| EN 14743:2005+A1:2007 | Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing |
| EN 13618:2016 | Flexible hose assemblies in drinking water installations - Functional requirements and test methods |
| EN 15091:2013 | Sanitary tapware - Electronic opening and closing sanitary tapware |
| EN 15714-3:2009 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| EN 1487:2014 | Building valves - Hydraulic safety groups - Tests and requirements |
| EN 778:2009 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| EN 14595:2016 | Tanks for transport of dangerous goods - Service equipment - Breather device |
| EN 1983:2013 | Industrial valves - Steel ball valves |
| EN 16865:2016 | Inland navigation vessels - Connections and assembled hoses for the transfer of potable water |
| EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety |
| EN 225-1:2007 | Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps |
| EN 816:2017 | Sanitary tapware - Automatic shut-off valves PN 10 |
| EN 419-1:2009 | Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety |
| EN 806-4:2010 | Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation |
| EN 14124:2004 | Inlet valves for flushing cisterns with internal overflow |
| EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
| EN 1359:2017 | Gas meters - Diaphragm gas meters |
| EN 14420-7:2013 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| EN 200:2008 | Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification |
| EN 26:2015 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| EN 14506:2005 | Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C |
| EN 14454:2005 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A |
| EN 498:2012 | Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included |
| EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety |
| EN 1984:2010 | Industrial valves - Steel gate valves |
| EN 13836:2006 | Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1 000 kW |
| EN 14452:2005 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B |
| EN 15714-4:2009 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| EN 14424:2013 | Hose fittings with screwed ferrules |
| EN 16313:2013 | Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone |
| EN 12561-2:2011 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| EN 15219:2006+A1:2007 | Water conditioning equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing |
| EN 215 : 2004 AMD 1 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| EN 817:2008 | Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications |
| EN 14367:2005 | Non controllable backflow preventer with different pressure zones - Family C, type A |
| EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety |
| EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| EN 16722:2015 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety |
| EN 624:2011 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| EN 16146:2012+A1:2014 | Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification |
| EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| EN 562 : 2003 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| EN 14453:2005 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C |
| EN 14829:2007 | Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW |
| EN 16617:2015 | Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking |
| EN 14420-8:2013+A1:2016 | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
| EN 14341:2006 | Industrial valves - Steel check valves |
| EN 14420-6:2013 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| DIN EN 16436-1:2016-04 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| PREN 14420-1 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| PREN 13617-4 : DRAFT 2010 | PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS |
| 15/30321549 DC : 0 | BS EN 16865 - INLAND NAVIGATION VESSELS - CONNECTIONS AND ASSEMBLED HOSES FOR THE TRANSFER OF POTABLE WATER |
| DIN EN 14829:2007-11 | Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW; German version EN 14829:2007 |
| BS EN 15420:2010 | Gas-fired central heating boilers. Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1000 kW |
| 13/30280715 DC : 0 | BS EN 1287 - SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATIONS |
| DIN EN 15714-3:2010-02 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| DIN EN 13618:2016-05 (Draft) | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| PREN 1111 : DRAFT 2015 | SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 15092:2008-09 | BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
| I.S. EN 14341:2006 | INDUSTRIAL VALVES - STEEL CHECK VALVES |
| 12/30261644 DC : 0 | BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE |
| 10/30218994 DC : 0 | BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| 13/30279702 DC : 0 | BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| DIN EN 15767-2:2009-09 | PORTABLE EQUIPMENT FOR PROJECTING EXTINGUISHING AGENTS SUPPLIED BY FIRE FIGHTING PUMPS - PORTABLE MONITORS - PART 2: WATER NOZZLES |
| 17/30363953 DC : 0 | BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| PREN 14595 : DRAFT 2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - PRESSURE AND VACUUM BREATHER DEVICE |
| 09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
| 11/30249911 DC : 0 | BS EN 50465 - GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| DIN EN 16129:2013-08 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| S.R. CLC/TS 50537-4:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 4: GAS AND LIQUID ACTUATED (BUCHHOLZ) RELAY FOR LIQUID IMMERSED TRANSFORMERS AND REACTORS WITH CONSERVATOR FOR RAIL VEHICLES |
| 10/30227098 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| DIN EN 16767:2016-08 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| PD CEN/TS 16650:2014 | Specification for hose couplings for petrol, oil and lubricants. High pressure couplings |
| 06/19977015 DC : DRAFT JULY 2006 | BS EN 10344 - MALLEABLE CAST IRON FITTINGS WITH COMPRESSION ENDS FOR STEEL PIPES |
| 13/30278752 DC : 0 | BS EN 12309-2 - GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| EN 50193-1:2016 | Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements |
| BS EN 15096:2008 | Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification |
| DIN EN 15624:2011-01 | Railway applications - Braking - Empty-loaded changeover devices (includes Amendment A1:2010) |
| PREN 14420-8 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| 04/30118758 DC : DRAFT AUG 2004 | PREN 12304 - INDUSTRIAL VALVES - STEEL PLUG VALVES |
| I.S. EN 560:2005 | GAS WELDING EQUIPMENT - HOSE CONNECTIONS FOR EQUIPMENT FOR WELDING, CUTTING AND ALLIED PROCESSES |
| DIN 16283:2004-07 | Adjusting nuts for pressure gauges and their accessories |
| PREN 15502-1 : DRAFT 2010 | GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| I.S. EN 50193-1:2016 | ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60730-2-19:2002 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-19: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED OIL VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| ONORM EN 215 : 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16129:2013 | PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| I.S. EN 15714-3:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| I.S. EN 15624:2008 | RAILWAY APPLICATIONS - BRAKING - EMPTY-LOADED CHANGEOVER DEVICES |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 1434-2 : 2015 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| I.S. EN 1434-2:2015 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| NF EN 15625 : 2009 + A1 2010 | RAILWAY APPLICATIONS - BRAKING - AUTOMATIC VARIABLE LOAD SENSING DEVICES |
| BS EN 16436-1 : 2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| 17/30356433 DC : 0 | BS EN 560 - GAS WELDING EQUIPMENT - HOSE CONNECTIONS FOR EQUIPMENT FOR WELDING, CUTTING AND ALLIED PROCESSES |
| DIN EN 560:2008-03 | GAS WELDING EQUIPMENT - HOSE CONNECTIONS FOR EQUIPMENT FOR WELDING, CUTTING AND ALLIED PROCESSES |
| DIN EN 1111:2015-07 (Draft) | SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 15612:2008 | RAILWAY APPLICATIONS - BRAKING - BRAKE PIPE ACCELERATOR VALVE |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| DIN EN 15612:2011-01 | RAILWAY APPLICATIONS - BRAKING - BRAKE PIPE ACCELERATOR VALVE |
| DIN EN 498:2012-04 | Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included |
| DIN EN 624:2011-10 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| I.S. EN 15611:2008 | RAILWAY APPLICATIONS - BRAKING - RELAY VALVES |
| I.S. EN 676:2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| DIN EN 777-4:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| DIN EN 13278:2014-03 | OPEN FRONTED GAS-FIRED INDEPENDENT SPACE HEATERS |
| DIN EN 419-1:2009-07 | NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY |
| DIN EN 13025-1:2006-01 | Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml |
| DIN EN 225-1:2007-12 | Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps |
| DIN EN 12561-2:2011-10 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| DIN EN 30-1-1:2013-06 | Domestic cooking appliances burning gas - Part 1-1: Safety - General (includes Amendment 1:2013) |
| DIN EN 806-2:2005-06 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design; German version EN 806-2:2005 |
| BS EN 1775:2007 | Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations |
| BS EN 13278:2013 | Open fronted gas-fired independent space heaters |
| BS EN 200:2008 | Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification |
| BS EN 225-1:2007 | Atomizing oil burners. Oil burner pumps and oil burner motors. Connecting dimensions Oil burner pumps |
| BS EN 14543:2017 | Specification for dedicated liquefied petroleum gas appliances. Parasol patio heaters. Flueless radiant heaters for outdoor or amply ventilated area use |
| BS EN 12309-2:2015 | Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Safety |
| BS EN 14420-8 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| BS EN 1359:2017 | Gas meters. Diaphragm gas meters |
| BS EN ISO 15493 : 2003 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003) |
| BS EN 13617-2:2012 | Petrol filling stations Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| BS EN 1458-1:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW Safety |
| BS EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
| BS EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety |
| BS EN 30-1-1 : 2008 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
| BS EN 14455:2005 | Devices to prevent pollution by backflow of potable water. Pressurised air inlet valves DN 15 to DN 50. Family L, type A and type B |
| BS EN 562:2003 | Gas welding equipment. Pressure gauges used in welding, cutting and allied processes |
| DIN EN 14812:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| DIN EN 621:2010-04 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| EN 13434:2006 | Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B |
| CEN/TS 14421:2006 | Hose tail and ferrule for crimping and swaging |
| DIN EN 15202:2012-09 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| DIN EN 12094-6:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices |
| EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| DIN EN 14652:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| EN 14154-1:2005+A2:2011 | Water meters - Part 1: General requirements |
| DIN EN 16722:2015-12 | INDUSTRIAL VALVES - ENDTOEND AND CENTRETOEND DIMENSIONS FOR VALVES WITH THREADED ENDS |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 15502-1:2012+A1:2015 | Gas-fired heating boilers - Part 1: General requirements and tests |
| DIN EN 13618:2017-03 | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| DIN EN 14454:2005-08 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A |
| DIN EN 12094-4:2004-10 | Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4:2004 |
| DIN EN 14452:2005-08 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B; German version EN 14452:2005 |
| DIN EN 14124:2005-02 | Inlet valves for flushing cisterns with internal overflow |
| DIN EN 1458-1:2012-02 | DOMESTIC DIRECT GAS-FIRED TUBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
| DIN EN 14714:2005-06 | Inland navigation vessels - Connection nozzle for equipment and devices at cargo tanks - Dimensions |
| DIN EN 15420:2011-11 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
| EN 12094-4:2004 | Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators |
| DIN EN 10226-1:2004-10 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| DIN EN 12094-5:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
| EN 13025-1:2005 | Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml |
| CEN/TS 16650:2014 | Specification for hose couplings for petrol, oil and lubricants - High pressure couplings |
| DIN EN 14506:2005-08 | Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C |
| DIN EN 14154-1:2011-06 | WATER METERS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 12094-2:2003-09 | Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices; German version EN 12094-2:2003 |
| DIN EN 13836:2007-06 | Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW |
| EN 60335-2-75:2004/A12:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| EN 60730-2-19:2002/A2:2008 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-19: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED OIL VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| I.S. EN 13786:2004 | AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| I.S. EN 15033:2006 | ROOM SEALED STORAGE WATER HEATERS FOR THE PRODUCTION OF SANITARY HOT WATER USING LPG FOR VEHICLES AND BOATS |
| I.S. EN 14154-1:2005 | WATER METERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 14268:2005 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| I.S. EN 13785:2005 | REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| I.S. EN 15069:2008 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| I.S. EN 14267:2004 | IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| UNE-EN 15714-3:2010 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| UNE-EN 15714-4:2010 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| UNE-EN 89:2016 | Gas-fired storage water heaters for the production of domestic hot water |
| UNE-EN 15624:2009 | Railway applications - Braking - Empty-loaded changeover devices |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| UNE-EN 15767-2:2010 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 2: Water nozzles |
| UNE-EN 15420:2012 | Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW |
| UNE-EN 16436-1:2014 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| UNE-EN 13547:2014 | Industrial valves - Copper alloy ball valves |
| UNE-EN 16865:2017 | Inland navigation vessels - Connections and assembled hoses for the transfer of potable water |
| UNE-EN 13618:2017 | Flexible hose assemblies in drinking water installations - Functional requirements and test methods |
| UNE-EN 16146:2013 | Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification |
| UNE-EN 16145:2014 | Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification |
| UNE-EN 1458-1:2012 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety |
| UNE-EN 50193-1:2016 | Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements |
| UNE-EN 16313:2014 | Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone |
| UNE-EN 16767:2017 | Industrial valves - Steel and cast iron check valves |
| UNE-EN 14154-1:2005 | Water meters - Part 1: General requirements |
| UNE-EN 15612:2009 | Railway applications - Braking - Brake pipe accelerator valve |
| UNE-EN 13617-4:2012 | Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| UNE-EN 14420-7:2014 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| UNE-EN 15807:2011 | Railway applications - Pneumatic half couplings |
| UNE-EN 12561-2:2012 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| UNE-EN 14420-5:2014 | Hose fittings with clamp units - Part 5: Threaded connections |
| UNE-EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| UNE-EN 14424:2014 | Hose fittings with screwed ferrules |
| UNE-EN 15502-1:2013 | Gas-fired heating boilers - Part 1: General requirements and tests |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
| UNE-EN 13617-2:2012 | Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| UNE-EN 624:2011 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| UNE-EN 1020:2010 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| UNE-EN 16617:2015 | Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking |
| I.S. EN ISO 15493:2003 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003) |
| UNE-EN 1555-3:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
| UNE-EN 30-1-1:2009 | Domestic cooking appliances burning gas - Part 1-1: Safety - General |
| UNE-EN 14420-8:2014 | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
| UNE-EN 16722:2016 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| UNE-EN 16129:2014 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| UNE-EN 15625:2009 | Railway applications - Braking - Automatic variable load sensing devices |
| UNE-EN 15611:2009 | Railway applications - Braking - Relay valves |
| UNE-EN 13012:2012 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| UNE-EN 303-5:2013 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| UNE-EN 14595:2016 | Tanks for transport of dangerous goods - Service equipment - Breather device |
| UNE-EN 1113:2015 | Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification |
| UNE-EN 26:2016 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| UNE-EN 15202:2012 | LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| UNE-EN 15091:2014 | Sanitary tapware - Electronic opening and closing sanitary tapware |
| UNE-EN 14422:2014 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| UNE-EN 1124-2:2014 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions |
| UNE-EN 12309-2:2015 | Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety |
| UNE-EN 13060:2015 | Small steam sterilizers |
| UNE-EN 1434-2:2016 | Heat meters - Part 2: Constructional requirements |
| UNE-EN 14543:2006 | Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use |
| ONORM EN 817 : 2008 | SANITARY TAPWARE - MECHANICAL MIXERS (PN 10) - GENERAL TECHNICAL SPECIFICATIONS |
| UNE-EN 778:2010 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| UNE-EN 1983:2014 | Industrial valves - Steel ball valves |
| UNE-EN 331:2016 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| UNE-EN 525:2010 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| ONORM EN 200 : 2008 | SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.