![header thumbnail](/images/publishers\asme_cover.gif)
ASME B31.3:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\asme_cover.gif)
PROCESS PIPING
Hardcopy , PDF
05-08-2019
English
01-01-2016
Foreword
Committee Roster
Introduction
Summary of Changes
Chapter I - Scope and Definitions
Chapter II - Design
Chapter III - Materials
Chapter IV - Standards for Piping Components
Chapter V - Fabrication, Assembly, and Erection
Chapter VI - Inspection, Examination, and Testing
Chapter VII - Nonmetallic Piping and Piping Lined
With Nonmetals
Chapter VIII - Piping for Category M Fluid Service
Chapter IX - High Pressure Piping
Chapter X - High Purity Piping
Appendices
A - Allowable Stresses and Quality Factors for Metallic
Piping and Bolting Materials
B - Stress Tables and Allowable Pressure Tables for Nonmetals
C - C Physical Properties of Piping Materials
D - Flexibility and Stress Intensification Factors
E - Reference Standards
F - Guidance and Precautionary Considerations
G - Safeguarding
H - Sample Calculations for Branch Reinforcement
J - Nomenclature
K - Allowable Stresses for High Pressure Piping
L - Aluminum Alloy Pipe Flanges
M - Guide to Classifying Fluid Services
N - Application of ASME B31.3 Internationally
Q - Quality System Program
R - Use of Alternative Ultrasonic Acceptance Criteria
S - Piping System Stress Analysis Examples
V - Allowable Variations in Elevated Temperature Service
X - Metallic Bellows Expansion Joints
Z - Preparation of Technical Inquiries
Index
Describes Rules for the Process Piping Code Section B31.31 have been developed considering piping typically found in petroleum refineries; chemical, pharmaceutical, textile, paper, semiconductor, and cryogenic plants; and related processing plants and terminals.
DevelopmentNote |
SPANISH edition of 2010 version is still available, see ASME B31.3 SPANISH. (10/2012)
|
DocumentType |
Standard
|
ISBN |
9780791871195
|
Pages |
562
|
PublisherName |
American Society of Mechanical Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
NFPA 654 : 2017 | PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
ASCE 7 10 : 2011 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
API 15S : 2016 | SPOOLABLE REINFORCED PLASTIC LINE PIPE |
API 16D:2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
API 676 : 2009 : R2015 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
API 578 : 2018 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
API STD 602 : 2015+ERR 1 : 2016 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
EN 16125:2015 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API RP 2611 : 2011 | TERMINAL PIPING INSPECTION - INSPECTION OF IN-SERVICE TERMINAL PIPING SYSTEMS |
API 623 : 2013 | STEEL GLOBE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
API 53 : 2012 | BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
EN ISO 13631:2002 | Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
NBR 15827 : 2014 | INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST |
API 570 : 2016 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
API 600 CHINESE : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
API 612 : 2014 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
API 603 RUSSIAN : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
API 2510A : 1996 : R2010 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
EN ISO 10442:2002 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002) |
EN ISO 13628-15:2011 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) |
NORSOK L 005:2013 | COMPACT FLANGED CONNECTIONS |
NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
AWWA M45 : 3 | FIBERGLASS PIPE DESIGN |
API 602 RUSSIAN : 2009 | STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
API 538 : 2015 | INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
API TR 938-C : 2015 | USE OF DUPLEX STAINLESS STEELS IN THE OIL REFINING INDUSTRY |
AWS D10.10/D10.10M : 1999 : R2009 | RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING |
API 945 : 2003 : R2008 | AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
API 573 : 2013 | INSPECTION OF FIRED BOILERS AND HEATERS |
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
MSS SP 110 : 2010 | BALL VALVES THREADED, SOCKET-WELDING, SOLDER JOINT, GROOVED AND FLARED ENDS |
PIP PNC00001 : 2013 | PIPE SUPPORT CRITERIA FOR ASME B31.3 - METALLIC PIPING |
NACE RP 02 86 : 2002 | ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES |
API 616 : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
NFPA 86D : 1999 | INDUSTRIAL FURNACES USING VACUUM AS AN ATMOSPHERE |
NORSOK U-009:2011 | LIFE EXTENSION FOR SUBSEA SYSTEMS |
NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
API 608 RUSSIAN : 2012 | METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
API 677 : 2006 : R2010 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
API 579-1 : 2016 | FITNESS-FOR-SERVICE |
NORSOK D 007:2013 | WELL TESTING SYSTEM |
NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
MSS SP 88 : 2015 | DIAPHRAGM VALVES |
UFC 3-310-04 : Change 1 | UNIFIED FACILITIES CRITERIA - SEISMIC DESIGN FOR BUILDINGS |
EEMUA 193 : 2013 | MANAGING COMPETENCE ASSURANCE FOR PERSONNEL UNDERTAKING IN-SERVICE INSPECTION OF PRESSURE EQUIPMENT |
EEMUA 168 : 2010 | GUIDE TO THE PRESSURE TESTING OF IN-SERVICE PRESSURISED EQUIPMENT |
EEMUA 223 : 2010 | PRESSURE EQUIPMENT TESTING AFTER REPAIR, MODIFICATIONS OR RE-RATING: A GUIDE TO THE PRESSURE TEST WAIVER |
ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
API 677 :2006 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
EN ISO 13628-3:2000 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000) |
EN ISO 28921-2:2017 | Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015) |
EN ISO 28921-1:2017 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
EEMUA 164 : 1993 | SEAL-LESS CENTRIFUGAL PUMPS - CLASS 1 |
EN 14870-3:2006 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified) |
EEMUA 151 : 1987 | LIQUID RING VACUUM PUMPS AND COMPRESSORS |
EN ISO 10438-2:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems (ISO 10438-2:2007) |
PIP PCECV001 : 2016 | GUIDELINES FOR APPLICATION OF CONTROL VALVES |
DEFSTAN 02-348/2(2008) : 2008 | GUIDE TO THE DESIGN, CORROSION ASSESSMENT AND STRESS ANALYSIS OF STEAM SYSTEMS PIPEWORK |
API 16D CHINESE : 2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
API 611 : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
EN ISO 13628-1:2005/A1:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
API 16C CHINESE : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
NACE SP 02 86 : 2007 | ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES |
API 16ST:2009 | COILED TUBING WELL CONTROL EQUIPMENT SYSTEMS |
API 577 : 2013 | WELDING PROCESSES, INSPECTION, AND METALLURGY |
API 625 : 2010 | TANK SYSTEMS FOR REFRIGERATED LIQUEFIED GAS STORAGE |
API 682 : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
API 7K CHINESE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
API 591 : 2014 | PROCESS VALVE QUALIFICATION PROCEDURE |
API 17V : 2015 | RECOMMENDED PRACTICE FOR ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR SUBSEA APPLICATIONS |
API 582 : 2016 | WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES |
API 64 RUSSIAN : 2001 | RECOMMENDED PRACTICE FOR DIVERTER SYSTEMS EQUIPMENT AND OPERATIONS |
API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
API 574 CHINESE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
API 677 : 2006 : R2016 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
API 682 CHINESE : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 5LD : 2017 | CRA CLAD OR LINED STEEL PIPE |
API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
API STD 17F : 2017 | SUBSEA PRODUCTION CONTROL SYSTEMS |
EN ISO 13628-4:2010/AC:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
EN ISO 13705:2012 | Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2012) |
AWS D10.10/D10.10M : 1999 | RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING |
AWS B2.4 : 2012 | SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION FOR THERMOPLASTICS |
NFPA 560 : 2007 | STORAGE, HANDLING, AND USE OF ETHYLENE OXIDE FOR STERILIZATION AND FUMIGATION |
CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006) |
NFPA 50A : 1999 | GASEOUS HYDROGEN SYSTEMS AT CONSUMER SITES |
EN ISO 14692-3:2017 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017) |
ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
API MPM CH5.8 : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5.8: MEASUREMENT OF LIQUID HYDROCARBONS BY ULTRASONIC FLOW METERS |
AWS B5.15 : 2010 | SPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERS |
CEN/TR 14549:2004 | Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive |
CSA/ANSI NGV 4.1-2018 | Natural gas vehicle (NGV) dispensing systems |
UNI EN ISO 13704 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
EN ISO 15551-1:2015 | Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015) |
API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
CSA HGV 4.1 : 2013 | STANDARD FOR HYDROGEN DISPENSING SYSTEMS |
API SPEC 17E : 2017 | SPECIFICATION FOR SUBSEA UMBILICALS |
API 574 : 2016 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
AWS B5.4 : 2005 | SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES |
NACE SP 04 72 : 2015 | METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 2510 : 2001 : R2011 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
EN ISO 10438-4:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems (ISO 10438-4:2007) |
EN ISO 10437:2003 | Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003) |
EEMUA 182 : 2004 | SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK |
API 590 : 1985 | STEEL LINE BLANKS |
API 591 RUSSIAN : 2008 | PROCESS VALVE QUALIFICATION PROCEDURE |
EEMUA 185 : 2011 | GUIDE FOR HOT TAPPING ON PIPING AND OTHER EQUIPMENT |
NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
API 4783 : 2016 | WATER MANAGEMENT AND STEWARDSHIP IN MIDSTREAM, DOWNSTREAM, AND DELIVERY OPERATIONS IN THE OIL AND GAS INDUSTRY |
MSS SP 97 : 2012 | INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS |
NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
API 551 : 2016 | PROCESS MEASUREMENT |
NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
API 609 CHINESE : 2009 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
EN ISO 21049:2004 | Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
ACI 350M : 2006 | METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
MSS SP 69 : 2003 | PIPE HANGERS AND SUPPORTS - SELECTION AND APPLICATION |
EN ISO 13628-6:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) |
API 609 : 2016 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
API 537 : 2017 | FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES |
CSA HGV 4.6 : 2013 | MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
EN ISO 25457:2008 | Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO 25457:2008) |
API RP 2201 : 2003 | SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
UNE-ISO 16110-1:2015 | Hydrogen generators using fuel processing technologies -- Part 1: Safety |
MSS SP 130 : 2013 | BELLOWS SEALS FOR INSTRUMENT VALVES |
BS EN 14870-3:2006 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Flanges |
API 611 : 2008 : R2014 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
EN ISO 27509:2012/AC:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012/COR 1:2013) |
API 16D RUSSIAN : 2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
API 945:2003 | AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
API 618 : 2007 : R2016 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 537 CHINESE : 2008 | FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
NACE SP 01 14 : 2014 | REFINERY INJECTION AND PROCESS MIX POINTS |
API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
EN ISO 13703:2000/AC:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS |
MSS SP 105 : 2016 | INSTRUMENT VALVES FOR CODE APPLICATIONS |
CSA HGV 4.9 : 2016 | HYDROGEN FUELING STATIONS |
ACI 376 : 2011 | CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES AND COMMENTARY |
ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
EN ISO 10438-3:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2007) |
API 15LE : 2008 : R2013 | SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE) |
API 7K : 2015+ERR 2:2016 | DRILLING AND WELL SERVICING EQUIPMENT |
API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
ASME FFS 1 : 2007 | FITNESS-FOR-SERVICE |
API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
API 17P : 2013 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS |
MSS SP 95 : 2014 | SWAGE(D) NIPPLES AND BULL PLUGS |
EEMUA 184 : 2009 | GUIDE TO THE ISOLATION OF PRESSURE RELIEVING DEVICES |
EEMUA 208 : 2010 | GUIDE TO LIFE-CYCLE MANAGEMENT OF PRESSURE RELIEF SYSTEMS |
EEMUA 211 : 2016 | GUIDANCE ON THE SPECIFICATION OF PRESSURE VESSELS |
API TR 17TR10 : 2015 | SUBSEA UMBILICAL TERMINATION (SUT) DESIGN RECOMMENDATIONS |
API 599 : 2013 | METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
API 681 : 1996 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
API 7K : 2015 | DRILLING AND WELL SERVICING EQUIPMENT |
API 340 : 1997 | LIQUID RELEASE PREVENTION AND DETECTION MEASURES FOR ABOVEGROUND STORAGE FACILITIES |
NFPA 67 : 2016 | GUIDE ON EXPLOSION PROTECTION FOR GASEOUS MIXTURES IN PIPE SYSTEMS |
API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
API 751 : 2013 | SAFE OPERATION OF HYDROFLUORIC ACID ALKYLATION UNITS |
API 5LD CHINESE : 2009 | SPECIFICATION FOR CRA CLAD OR LINED STEEL PIPE |
NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
API 570 CHINESE : 2009 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
NORSOK M 630 : REV 6 | MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING |
API PUBL 2510A : 1996 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
BS ISO 18647:2017 | Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms |
AWS D10.7M/D10.7 : 2008 | GUIDE FOR THE GAS SHIELDED ARC WELDING OF ALUMINUM AND ALUMINUM ALLOY PIPE |
API 681 : 1996 : R2010 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 676 CHINESE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
API STD 612:2020 | Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications |
API 16D : 2004 : R2013 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
EI 1594 : 2014 | INITIAL PRESSURE STRENGTH TESTING OF AIRPORT FUEL HYDRANT SYSTEMS WITH WATER |
BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
API 16ST : 2009 : R2014 | COILED TUBING WELL CONTROL EQUIPMENT SYSTEMS |
API 15LE CHINESE : 2008 | SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE) |
API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 932B : 2012 | DESIGN, MATERIALS, FABRICATION, OPERATION, AND INSPECTION GUIDELINES FOR CORROSION CONTROL IN HYDROPROCESSING REACTOR EFFLUENT AIR COOLER (REAC) SYSTEMS |
API RP 14E : 1991 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
API STD 676 : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
NFPA 50B : 1999 | LIQUEFIED HYDROGEN SYSTEMS AT CONSUMER SITES |
NFPA 51A : 2012 | ACETYLENE CYLINDER CHARGING PLANTS |
EN ISO 13628-5:2009 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009) |
EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015) |
EN ISO 10440-2:2001 | Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001) |
ACI 376M : 2011 | CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES (METRIC) |
API 2201 : 2003 : R2010 | SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
DEFSTAN 02-772/1(2007) : 2007 | WELDING AND FABRICATION OF PIPEWORK, MACHINERY AND ENGINEERING COMPONENTS FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
EEMUA 234 : 2016 | 90/10 COPPER NICKEL ALLOY PIPING FOR OFFSHORE APPLICATIONS (SPECIFICATION) |
API MPM CH5.8 SPANISH : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5.8: MEASUREMENT OF LIQUID HYDROCARBONS BY ULTRASONIC FLOW METERS |
API 618 : 2007 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
EN ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007) |
API 603 : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
API 577 CHINESE : 2013 | WELDING PROCESSES, INSPECTION AND METALLURGY |
EN ISO 13535:2000 | Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000) |
NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
API 675 : 2012 | POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
AWS C5.10/C5.10M : 2003 | RECOMMENDED PRACTICES FOR SHIELDING GASES FOR WELDING AND CUTTING |
API 15LE : 2008(R2018) | SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE) |
NFPA 650 : 1998 | PNEUMATIC CONVEYING SYSTEMS FOR HANDLING COMBUSTIBLE PARTICULATE SOLIDS |
API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
API 2A LRFD : 1993 | RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN |
EN ISO 13704:2007/AC:2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
API 2510 : 2001 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
API 14E : 1991 : R2013 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
MSS SP 134 : 2012 | VALVES FOR CRYOGENIC SERVICE, INCLUDING REQUIREMENTS FOR BODY/BONNET EXTENSIONS |
UL 60335-2-72:1ED 2017-09 | Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use |
NACE 5A171 : 2007 | MATERIALS FOR STORING AND HANDLING COMMERCIAL GRADES OF AQUEOUS HYDROFLUORIC ACID AND ANHYDROUS HYDROGEN FLUORIDE |
API 560 : 2016 | FIRED HEATERS FOR GENERAL REFINERY SERVICE |
NFPA 86C : 1999 | INDUSTRIAL FURNACES USING A SPECIAL PROCESSING ATMOSPHERE |
SAE J 2343 : 2018 | RECOMMENDED PRACTICE FOR LNG MEDIUM AND HEAVY-DUTY POWERED VEHICLES |
API 530 : 2015 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
EN ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) |
EEMUA 192 : 1998 | GUIDE FOR THE PROCUREMENT OF VALVES FOR LOW TEMPERATURE (NON-CRYOGENIC) SERVICE |
EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
API 537:2017+ADD 1:2020 | FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES |
API 605 : 4ED 88 | LARGE-DIAMETER CARBON STEEL FLANGES (NOMINAL PIPE SIZES 26 THROUGH 60; CLASSES 75, 150, 300, 400, 600 AND 900) |
MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
API 599 RUSSIAN : 2013 | METAL PLUG VALVES - FLANGED, THREADED AND WELDING ENDS |
API 2510A : 1996 : R2015 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
ASME BPE : 2016 | BIOPROCESSING EQUIPMENT |
MSS SP 141 : 2012 | MULTI-TURN AND CHECK VALVE MODIFICATIONS |
API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
API 8C : 2012 | DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2) |
API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
EN ISO 10961:2012 | Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010) |
I.S. EN ISO 25457:2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
BS EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
ASME B31.1 : 2016 | POWER PIPING |
ASTM F 2014 : 2000 : R2019 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
ASME PCC 1 : 2013 | GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY |
ISO 28921-2:2015 | Industrial valves Isolating valves for low-temperature applications Part 2: Type testing |
CSA Z341 SERIES : 2014 | STORAGE OF HYDROCARBONS IN UNDERGROUND FORMATIONS |
CSA B836 : 2014 | STORAGE, HANDLING, AND DISPENSING OF AVIATION FUELS AT AERODROMES |
ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
CSA B139 : 2015 | INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
DIN EN ISO 28921-2:2017-05 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 2: TYPE TESTING (ISO 28921-2:2015) |
ASTM F 2015 : 2000 | Standard Specification for Lap Joint Flange Pipe End Applications |
ISO 10961:2010 | Gas cylinders Cylinder bundles Design, manufacture, testing and inspection |
ASTM F 2015 : 2000 : R2006 | Standard Specification for Lap Joint Flange Pipe End Applications |
UNE-EN ISO 28921-2:2018 | Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015) |
BS EN ISO 25457:2008 | Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service |
PD CEN/TR 14549:2004 | Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive |
EN ISO 23251:2007/A1:2008 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements |
ASTM F 1949 : 1999 : R2013 | Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles (Withdrawn 2022) |
PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
BS ISO 13577-3:2016 | Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases |
BS ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Safety |
BS 7993:2011 | Twin ferrule connectors and associated tubing for 316 stainless steel systems. Specification and test methods |
BS 5908:1980 | Code of practice for fire precautions in chemical plant |
ASTM F 2014 : 2000 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
ISO 10440-2:2001 | Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free) |
BS 1560-3.1:1989 | Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for steel flanges |
PD ISO/TR 17177:2015 | Petroleum and natural gas industries. Guidelines for the marine interfaces of hybrid LNG terminals |
BS EN ISO 10442:2002 | Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors |
NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
ISO 18647:2017 | Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms |
NFPA 1 : 2018 | FIRE CODE |
ISO 27509:2012 | Petroleum and natural gas industries Compact flanged connections with IX seal ring |
BS ISO 10790:2015 | Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) |
BS EN 16125:2015 | LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
BS 7159:1989 | Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
BS EN ISO 23251 : 2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
ISO 13574:2015 | Industrial furnaces and associated processing equipment — Vocabulary |
VDI 3842:2004-06 | Vibrations in piping systems |
ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
API 12GDU : 1990 | SPECIFICATION FOR GLYCOL-TYPE GAS DEHYDRATION UNITS |
ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
DIN EN ISO 17945:2015-08 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
ASTM F 2014 : 2000 : R2006 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements |
BS ISO 16111:2008 | Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride |
BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
BS 1600:1991 | Specification for dimensions of steel pipe for the petroleum industry |
CAN/CSA-Z662-15 | Oil and gas pipeline systems |
DIN EN 16125:2016-03 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
BS EN ISO 13705:2012 | Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service |
ISO 13577-3:2016 | Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases |
ISO 13628-5:2009 | Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals |
ASTM F 1949 : 1999 | Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles |
ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
ASTM A 1091/A1091M : 2016 | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service |
BS EN ISO 10440-1:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free) |
ANSI/CSA HGV 4.8-2012 (R2018) | Hydrogen gas vehicle fueling station compressor guidelines |
ASTM A 1091/A1091M : 2016 : EDT 1 | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service |
ISO 10436:1993 | Petroleum and natural gas industries — General-purpose steam turbines for refinery service |
ISO 21049:2004 | Pumps Shaft sealing systems for centrifugal and rotary pumps |
ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
NASA-STD-8719.17C:2017 | NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS) |
ISO 15551-1:2015 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift |
ISO 13535:2000 | Petroleum and natural gas industries Drilling and production equipment Hoisting equipment |
API RP 17R : 2015 | RECOMMENDED PRACTICE FOR FLOWLINE CONNECTORS AND JUMPERS |
ISO 15590-3:2004 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges |
BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
API 14E CHINESE : 2007 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
ISO 14692-3:2017 | Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design |
NFPA 87 : 2018 | FLUID HEATERS |
ISO 28921-1:2013 | Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing |
ISO 13628-15:2011 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds |
ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
NFPA 1 : 2021 | FIRE CODE |
BS EN ISO 13703 : 2001 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS |
BS EN ISO 13628-5:2009 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals |
I.S. EN ISO 13704:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
BS EN ISO 15551-1:2015 | Petroleum and natural gas industries. Drilling and production equipment Electric submersible pump systems for artificial lift |
UNE-EN 16125:2016 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
BS 5908-1:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises |
BS EN ISO 10438-4:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries Self-acting gas seal support systems |
NFPA 484 : 2015 | COMBUSTIBLE METALS |
UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
NACE SP 04 03 : 2015 | AVOIDING CAUSTIC STRESS CORROSION CRACKING OF REFINERY EQUIPMENT AND PIPING |
BS 8010-3:1993 | Code of practice for pipelines Pipelines subsea: design, construction and installation |
BS EN ISO 10437:2003 | Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications |
CSA B836:14 (R2019) | Storage, handling, and dispensing of aviation fuels at aerodromes |
BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
BS PD8010-1(2015) : 2015 | PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
BS EN ISO 27509:2012 | Petroleum and natural gas industries. Compact flanged connections with IX seal ring |
ISO 23251:2006 | Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems |
BS ISO 10816-8:2014 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Reciprocating compressor systems |
ISO/TR 17177:2015 | Petroleum and natural gas industries Guidelines for the marine interfaces of hybrid LNG terminals |
BS EN ISO 10438-2:2003 | Petroleum and natural gas industries. Lubrication, shaft sealing and control oil systems and auxiliaries Special purpose oil systems |
BS EN ISO 28921-2:2017 | Industrial valves. Isolating valves for low-temperature applications Type testing |
ISO 24817:2017 | Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
PD 8010-1:2004 | Code of practice for pipelines Steel pipelines on land |
ISO 10437:2003 | Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications |
ISO 10438-3:2007 | Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems |
ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
DIN EN ISO 28921-1:2017-05 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
ISO 10790:2015 | Measurement of fluid flow in closed conduits Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) |
ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
BS EN ISO 10440-2:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free) |
ISO 17945:2015 | Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
BS EN ISO 13535:2001 | Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment Hoisting equipment |
ISO 15649:2001 | Petroleum and natural gas industries — Piping |
ISO 10816-8:2014 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 8: Reciprocating compressor systems |
ISO 13628-6:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
I.S. EN ISO 28921-1:2017 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013) |
ISO/TS 24817:2006 | Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection |
API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
API 1169 : 2013 | RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
CSA HGV 4.4 : 2013(R2018) | STANDARD FOR BREAKAWAY DEVICES FOR COMPRESSED HYDROGEN DISPENSING HOSES AND SYSTEMS |
ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
ISO 13704:2007 | Petroleum, petrochemical and natural gas industries — Calculation of heater-tube thickness in petroleum refineries |
BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
BS EN ISO 13628-6:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems |
BS EN ISO 21049:2004 | Pumps. Shaft sealing systems for centrifugal and rotary pumps |
BS EN ISO 13628-15:2011 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds |
UNE-EN ISO 28921-1:2018 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
ISO 13628-3:2000 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems |
BS EN ISO 28921-1:2017 | Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing |
BS EN ISO 10438-3:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft sealing and control oil systems and auxilliaries General-purpose oil systems |
ISO 13703:2000 | Petroleum and natural gas industries Design and installation of piping systems on offshore production platforms |
CAN/CSA-Z767-17 | Process safety management |
ASTM F 2014 : 2000 : R2013 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
BS 8010-2.8:1992 | Code of practice for pipelines. Pipelines on land: design, construction and installation Steel for oil and gas |
BS EN ISO 10961:2012 | Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection |
BS EN ISO 10438-1:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements |
Z276-18 | Liquefied natural gas (LNG) - Production, storage, and handling |
NACE RP 04 72 : 2005 | METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
ISO 13631:2002 | Petroleum and natural gas industries Packaged reciprocating gas compressors |
ISO 19859:2016 | Gas turbine applications Requirements for power generation |
BS ISO 15649:2001 | Petroleum and natural gas industries. Piping |
BS EN ISO 14692-3:2017 | Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping System design |
ISO 13705:2012 | Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service |
ASTM F 1323 : 2014 : REDLINE | Standard Specification for Shipboard Incinerators |
DIN EN ISO 10961:2012-06 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010) |
ASTM F 1949 : 1999 : R2007 | Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles |
BS EN ISO 13631:2002 | Petroleum and natural gas industries. Packaged reciprocating gas compressors |
BS EN ISO 13628-3:2001 | Petroleum and natural gas industries. Design and operation of subsea production systems Through flowline (TFL) systems |
BS EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements |
CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
CSA LNG 2-2017 | LIQUEFIED NATURAL GAS VEHICLE FUEL CONTAINERS |
ISO 10438-2:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems |
DIN ISO 10816-8:2014-11 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS (ISO 10816-8:2014) |
CSA Z1006 : 2016 | MANAGEMENT OF WORK IN CONFINED SPACES |
CSA Z1006:16 (R2020) | Management of work in confined spaces |
BS EN ISO 13704:2007 | Petroleum, petrochemical and natural gas industries. Calculation of heater-tube thickness in petroleum refineries |
ASTM F 2015 : 2000 : R2013 | Standard Specification for Lap Joint Flange Pipe End Applications |
API SPEC 12K : 2008 | SPECIFICATION FOR INDIRECT TYPE OILFIELD HEATERS |
PD 8010-2:2015+A1:2016 | Pipeline systems Subsea pipelines. Code of practice |
API 621 : 2010 | RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
ISO 10438-4:2007 | Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems |
BS ISO 13704:2001 | Petroleum and natural gas industries. Calculation of heater-tube thickness in petroleum refineries |
ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
PIP PCSIP001 : 2015 | INSTRUMENT TUBING MATERIAL SPECIFICATION |
PD 6438:1969 | A review of present methods for design of bolted flanges for pressure vessels |
API 536 : 2017 | POST-COMBUSTION NO[X] CONTROL FOR FIRED EQUIPMENT IN GENERAL REFINERY AND PETROCHEMICAL SERVICES |
BS ISO 13628-5:2002 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals |
BS EN ISO 13628-1 : 2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
ISO 25457:2008 | Petroleum, petrochemical and natural gas industries — Flare details for general refinery and petrochemical service |
ASTM B 834 : 2017 : REDLINE | Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts |
DD CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
IEC PAS 62282-6-1:2006 | Fuel cell technologies - Part 6-1: Micro fuel cell power systems - Safety |
BS EN ISO 24817:2017 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
BS PD8010-2(2015) : 2015 | PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
CAN/CSA-C22.2 NO. 60335-2-72:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE |
ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
PIP PCECV003 : 2017 | GUIDELINES FOR APPLICATION OF REMOTELY ACTUATED ON-OFF VALVES |
API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
API 17F REDLINE : 2006 | SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS |
API 537 REDLINE : 2008 | FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
API 621 REDLINE : 2010 | RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
PIP PNSC0036 : 2010 | HIGH DENSITY POLYETHYLENE (HDPE) PIPING INSTALLATION SPECIFICATION |
API 620 REDLINE : 2008 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
PIP PNC00005 : 2016 | DESIGN OF ASME B31.3 - METALLIC PIPING SYSTEMS |
API 619 REDLINE : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
PIP PNE00002 : 2019 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
API 5LD REDLINE : 2009 | SPECIFICATION FOR CRA CLAD OR LINED STEEL PIPE |
API 2508 : 1985 | DESIGN AND CONSTRUCTION OF ETHANE AND ETHYLENE INSTALLATIONS AT MARINE AND PIPELINE TERMINALS, NATURAL GAS PROCESSING PLANTS REFINERIES, PETROCHEMICAL PLANTS AND TANK FARMS |
ASME STP-PT-025 : 0 | EXTENDED FATIGUE EXEMPTION RULES FOR LOW CR ALLOYS INTO THE TIME-DEPENDENT RANGE FOR SECTION 8 DIVISION 2 CONSTRUCTION |
PIP PHSMV026 : 2017 | HYGIENIC STAINLESS STEEL BALL VALVE DESCRIPTIONS |
API 6G : 3ED 82 | RECOMMENDED PRACTICE ON THROUGH FLOWLINE (TFL) PUMP DOWN SYSTEMS |
API 1124 : 1991 | SHIP, BARGE AND TERMINAL HYDROCARBON VAPOR COLLECTION MANIFOLDS |
API 7K REDLINE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
PIP PNSC0011 : 2015 | INSTALLATION OF ASME B31.3 METALLIC PIPING |
API 616 REDLINE : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API TR 938-C REDLINE : 2011 | USE OF DUPLEX STAINLESS STEELS IN THE OIL REFINING INDUSTRY |
API 578 REDLINE : 2010 | MATERIAL VERIFICATION PROGRAM FOR NEW AND EXISTING ALLOY PIPING SYSTEMS |
API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
PIP RECE002 : 2014 | DESIGN OF PIPING LOADS ON ROTATING MACHINERY NOZZLES |
API 2T REDLINE : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
ASME STP-PT-003 : 2005 | HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES |
API 606 : 3ED 89 | COMPACT CARBON STEEL GATE VALVES - EXTENDED BODY |
PIP PNFJ8000 : 2007 | JACKETED PIPING FABRICATION AND INSTALLATION DETAILS |
API 602 REDLINE : 2009 | STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
PIP RESE001 : 2017 | GENERAL PURPOSE SKID-MOUNTED PACKAGED EQUIPMENT SPECIFICATION |
ASME STP-PT-005 : 2006 | DESIGN FACTOR GUIDELINES FOR HIGH-PRESSURE COMPOSITE HYDROGEN TANKS |
ASME RTP 1 : 2015 | REINFORCED THERMOSET PLASTIC CORROSION-RESISTANT EQUIPMENT |
CSA Z245-11 : 2017 | STEEL FITTINGS |
API 609 REDLINE : 2009 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
PIP RESP003V : 2013 | SPECIFICATION FOR HIGH POWER VERTICAL CENTRIFUGAL PUMPS FOR WATER SERVICE |
CSA FC 3 : 2004 | PORTABLE FUEL CELL POWER SYSTEMS |
ASME RTP-1 : 2017 | REINFORCED THERMOSET PLASTIC CORROSION-RESISTANT EQUIPMENT |
API 570 REDLINE : 2009 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
PIP PHSMV025 : 2015 | HYGIENIC STAINLESS STEEL CHECK VALVE DESCRIPTIONS |
API RP 2T : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
PIP PHSMV029 : 2017 | HYGIENIC STAINLESS STEEL OTHER VALVE DESCRIPTIONS |
UNE-EN 16125:2020 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
PIP PNE00002 : 2013 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
ASCE/COPRI 61 14 : 2014 | SEISMIC DESIGN OF PIERS AND WHARVES |
ANSI/CSA AMERICA FC 3-2004 (R2017) | PORTABLE FUEL CELL POWER SYSTEMS |
API 608 REDLINE : 2008 | METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
API 680 : 1ED 87 | PACKAGED RECIPROCATING PLANT AND INSTRUMENT AIR COMPRESSORS FOR GENERAL REFINERY SERVICES |
API 5C7 : 1996 : R2007 | RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES |
API 614 REDLINE : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
API 17C : 2002 : R2010 | RECOMMENDED PRACTICE ON TFL (THROUGH FLOWLINE) SYSTEMS |
API 941 REDLINE : 2008 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
I.S. EN ISO 15551-1:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT (ISO 15551-1:2015) |
PIP PHSMV027 : 2017 | HYGIENIC STAINLESS STEEL BUTTERFLY VALVE DESCRIPTIONS |
PIP PNSM0110 : 2017 | PURCHASING REQUIREMENTS FOR VALVES |
ASME MFC 11 : 2006 : R2014 | Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters (MFC-11 - 2006) |
PIP PNSM0120 : 2018 | PURCHASING REQUIREMENTS FOR BOLTING |
API 53 RUSSIAN : 1997 : R2004 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
ASME MFC 11 : 2006 | MEASUREMENT OF FLUID FLOW BY MEANS OF CORIOLIS MASS FLOWMETERS |
API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
API 676 REDLINE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
PIP PHSMV047 : 2017 | HYGIENIC PLASTIC AND PLASTIC LINED BUTTERFLY VALVE DESCRIPTIONS |
API 533 : 1ED 86 | AIR PREHEAT SYSTEMS FOR PROCESS HEATERS |
API 11PGT : 1992 | RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES |
API 582 REDLINE : 2009 | WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES |
PIP PNE00012 : 2017 | PIPING EXAMINATION AND LEAK TEST GUIDE |
PIP PNE00004 : 2016 | STEAM TRAP GUIDELINES |
PIP PNC00004 : 2012 | PIPING STRESS ANALYSIS CRITERIA FOR ASME B31.3 - METALLIC PIPING |
API 5C7:1996 | RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES |
ASCE 7 98 : 2000 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
API 55 : 1995 : R2007 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
ASME STP-PT-024 : 2008 | DEVELOPMENT OF BASIC TIME-DEPENDENT ALLOWABLE STRESSES FOR CREEP REGIME IN SECTION 8, DIVISION 1 |
PIP PNSM0115 : 2016 | PURCHASING REQUIREMENTS FOR PIPE |
12/30250727 DC | BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
PIP PNSC0021 : 2015 | LEAK TESTING OF PIPING SYSTEMS |
PIP PNSC0001 : 2014 | ASME B31.3 METALLIC PIPING FABRICATION AND EXAMINATION SPECIFICATION |
PIP PNSC0035 : 2017 | STEAM TRACING SPECIFICATION |
ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
PIP PNSM0116 : 2013 | PURCHASING REQUIREMENTS FOR FITTINGS AND FLANGES |
BS ISO 13574:2015 | Industrial furnaces and associated processing equipment. Vocabulary |
PIP PCCCV001 : 2016 | CONTROL VALVES SELECTION CRITERIA |
PIP PHSMV022 : 2018 | HYGIENIC STAINLESS STEEL DIAPHRAGM VALVE DESCRIPTIONS |
PIP RESR001 : 2010 | PACKAGED, SKID-MOUNTED INDUSTRIAL PROCESS REFRIGERATION SYSTEMS SPECIFICATION |
ASME PTC19.3 TW : 2016 | THERMOWELLS |
API 2T : 2010 : R2015 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
API 591 REDLINE : 2008 | PROCESS VALVE QUALIFICATION PROCEDURE |
API 530 REDLINE : 2008 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
API Std 53 RUSSIAN:1997 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
API 611 REDLINE : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 574 REDLINE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
API 17E REDLINE : 2010 | SPECIFICATION FOR SUBSEA UMBILICALS |
PIP RESP003H : 2013 | SPECIFICATION FOR HIGH POWER HORIZONTAL CENTRIFUGAL PUMPS FOR WATER SERVICE |
API 16C RUSSIAN : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
API 17 C : 2002 | RECOMMENDED PRACTICE ON TFL (THROUGH FLOWLINE) SYSTEMS |
API 55 :1995 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
API 55 : 1995 : R2013 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
MSS SP 122 : 2012 | PLASTIC INDUSTRIAL BALL VALVES |
AWS A5.14/A5.14M : 2011 | SPECIFICATION FOR NICKEL AND NICKEL-ALLOY BARE WELDING ELECTRODES AND RODS |
ISO 15649:2001 | Petroleum and natural gas industries — Piping |
ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
AWWA C606 : 2015 | GROOVED AND SHOULDERED JOINTS |
AWS A5.31 : 1992 | SPECIFICATION FOR FLUXES FOR BRAZING AND BRAZE WELDING |
ASQ Q9000 3:1997 | Quality Management And Quality Assurance Standards - Part 3: Guidelines For The Application Of Ansi/Iso/Asqc Q9001-1994 To The Development, Supply, Installation And Maintenance Of Computer Software |
MSS SP 70 : 2011 | GRAY IRON GATE VALVES, FLANGED AND THREADED ENDS |
ASTM D 2467 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
PFI ES 48 : 0 | RANDOM EXAMINATION |
ASTM A 353/A353M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel |
AWWA C207 : 2013 | STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM) |
ASTM E 446 : 2015 : REDLINE | Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
ASTM D 3517 : 2014 : REDLINE | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
ASTM D 3261 : 2016-11 | SPECIFICATION FOR BUTT HEAT FUSION POLYETHYLENE (PE) PLASTIC FITTINGS FOR POLYETHYLENE (PE) PLASTIC PIPE AND TUBING |
ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
ASTM A 995/A995M : 2013 | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
ASTM F 1412 : 2016 : REDLINE | Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems |
ASTM D 4024 : 2015 : REDLINE | Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
PFI ES 7 : 0 | MINIMUM LENGTH AND SPACING FOR WELDED NOZZLES |
ASTM F 439 : 2013 : REDLINE | Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
MSS SP 6 : 2017 | STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS |
ASTM A 47/A47M : 1999 | Standard Specification for Ferritic Malleable Iron Castings |
ASTM A 376/A376M : 2017 : REDLINE | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service |
ASTM B 409 : 2006 | Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip |
ASTM D 6041 : 2011 | Standard Specification for Contact-Molded <span class='unicode'>“</span>Fiberglass<span class='unicode'>”</span> (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
ASTM B 265 : 2015 : REDLINE | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
AISC 325 : 2017 | STEEL CONSTRUCTION MANUAL |
SAE J 518 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, FOUR-BOLT SPLIT FLANGE TYPE |
ASTM A 537/A537M : 2013 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
AWS A5.5/A5.5M : 2014 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
NACE SP 01 70 : 2012 | PROTECTION OF AUSTENITIC STAINLESS STEELS AND OTHER AUSTENITIC ALLOYS FROM POLYTHIONIC ACID STRESS CORROSION CRACKING DURING A SHUTDOWN OF REFINERY EQUIPMENT |
ASTM F 493 : 2014 : REDLINE | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
AWWA C500 : 2009 | METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
ASTM B 335 : 2003 | Standard Specification for Nickel-Molybdenum Alloy Rod |
ASTM F 438 : 2017 : REDLINE | Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
ASTM A 204/A204M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
ASTM B 467 : 2014 : REDLINE | Standard Specification for Welded Copper-Nickel Pipe |
ASTM B 96/B96M : 2016 : REDLINE | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels |
NFPA 1963 : 2014 | FIRE HOSE CONNECTIONS |
ASTM A 181/A181M : 2014 : REDLINE | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
ASTM A 299/A299M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
ANSI/AWWA C115/A21.15 : 2011 | FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
ASTM D 3840 : 2014 : REDLINE | SPECIFICATION FOR 'FIBERGLASS' (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE FITTINGS FOR NONPRESSURE APPLICATIONS |
MSS SP 83 : 2014 | CLASS 3000 AND 6000 PIPE UNIONS, SOCKET WELDING AND THREADED (CARBON STEEL, ALLOY STEEL, STAINLESS STEELS, AND NICKEL ALLOYS) |
ASTM F 441/F441M : 2015 : REDLINE | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
AWS A5.22 : 1995 | SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR FLUX CORED ARC WELDING AND STAINLESS STEEL FLUX CORED RODS FOR GAS TUNGSTEN ARC WELDING |
ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
ANSI/AWWA C200 : 2017 | STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER |
ASTM A 409/A409M : 2015 : REDLINE | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
API 609 : 2016 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
ASTM A 694/A694M : 2016 : REDLINE | Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service |
ASTM B 466/B 466M : 2014-05 | SPECIFICATION FOR SEAMLESS COPPER-NICKEL PIPE AND TUBE |
ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
ASTM D 2996 : 2017 : REDLINE | Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
ASTM A 553/A553M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel |
ANSI/AWWA C950:2013 | FIBERGLASS PRESSURE PIPE |
ASME PCC 1 : 2013 | GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY |
ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
ASTM E 114 : 2015 : REDLINE | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
MSS SP 80 : 2013 | BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES |
ASTM A 358/A358M : 2015 : REDLINE | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
ASME B16.42 : 2016 | DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
AWWA C151/A21.51 : 2017 | DUCTILE-IRON PIPE, CENTRIFUGALLY CAST |
ASTM B 464/B464M : 2015 : REDLINE | Standard Specification for Welded UNS N08020 Alloy Pipe |
ASME BPE : 2016 | BIOPROCESSING EQUIPMENT |
ASTM D 2464 : 2015 : REDLINE | Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
ASTM D 1527 : 1999 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
ASME A13.1 : 2015 | SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS |
ASTM D 5421 : 2015 : REDLINE | Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
ASTM E 155 : 2015 : REDLINE | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
ASTM F 1282 : 2017 : REDLINE | Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
MSS SP 72 : 2010 | BALL VALVES WITH FLANGED OR BUTT-WELDING ENDS FOR GENERAL SERVICE |
AWWA C208 : 2012 | DIMENSIONS FOR FABRICATED STEEL WATER PIPE FITTINGS |
AWWA C150/A21.50 : 2014 | THICKNESS DESIGN OF DUCTILE-IRON PIPE |
ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
PFI ES 24 : 2013 | PIPE BENDING METHODS, TOLERANCES, PROCESS AND MATERIAL REQUIREMENTS |
SAE J 513 : 1999 | REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS |
ASME B16.15 : 2013 | CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
ASTM B 161 : 2005 : EDT 1 | Standard Specification for Nickel Seamless Pipe and Tube |
ASTM B 169/B169M : 2015 : REDLINE | Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar |
ASTM D 3000 : 1995 : REV A : EDT 1 | Standard Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter (Withdrawn 2003) |
ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
MSS SP 97 : 2012 | INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS |
API 5L : 2012 | LINE PIPE |
ASTM D 3839 : 2014 : REDLINE | Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe |
ANSI/AWWA C300 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE |
MSS SP 78 : 2011 | GRAY IRON PLUG VALVES, FLANGED AND THREADED ENDS |
ASTM D 2855 : 2015 : REDLINE | Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets |
ASTM D 3309 : 1996 : REV A : R2002 | Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010) |
ASTM A 437/A437M : 2015 : REDLINE | Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service |
AWWA C504 : 2015 | RUBBER-SEATED BUTTERFLY VALVES |
MSS SP 81 : 2017 | STAINLESS-STEEL OR STAINLESS-STEEL-LINED, BONNETLESS, KNIFE GATE VALVES WITH FLANGED ENDS |
ASME B16.18 : 2012 | Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br> |
MSS SP 42 : 2013 | CORROSION-RESISTANT GATE, GLOBE, ANGLE, AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS (CLASSES 150, 300, & 600) |
ASTM A 351/A351M : 2016-05 | SPECIFICATION FOR CASTINGS, AUSTENITIC, FOR PRESSURE-CONTAINING PARTS |
NACE SP 04 72 : 2015 | METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
ASTM A 420/A420M : 2016 : REDLINE | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
ASTM D 2672 : 2014 : REDLINE | Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement |
AWS A5.1M/A5.1 : 2012 | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
ASTM D 2683 : 2014 : REDLINE | Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing |
ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
ASTM D 2513 : 2017-01 | SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS |
MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
MSS SP 51 : 2012 | CLASS 150LW CORROSION RESISTANT FLANGES AND CAST FLANGED FITTINGS |
AWS A5.11/A5.11M : 2010 | SPECIFICATION FOR NICKEL AND NICKEL-ALLOY WELDING ELECTRODES FOR SHIELDED METAL ARC WELDING |
ASTM F 714 : 2013 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter |
API 608 : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
ASTM F 1281 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
MSS SP 65 : 2012 | HIGH PRESSURE CHEMICAL INDUSTRY FLANGES AND THREADED STUBS FOR USE WITH LENS GASKETS |
ASTM A 928/A928M : 2014 : REDLINE | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
AWWA C302 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE |
API 15LR : 2001 | SPECIFICATION FOR LOW PRESSURE FIBERGLASS LINE PIPE |
ASTM B 152/B152M : 2013 : REDLINE | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
API 599 : 2013 | METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
ASTM B 61 : 2015 : REDLINE | Standard Specification for Steam or Valve Bronze Castings |
ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
AWS QC1 : 2007 | STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS |
API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
MSS SP 53 : 2012 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - MAGNETIC PARTICLE EXAMINATION METHOD |
ASTM D 2466 : 2017 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
AWWA C111/A21.11 : 2017 | RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS |
ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
AWS A5.4/A5.4M : 2012 | SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
SAE J 514 : 2012 | HYDRAULIC TUBE FITTINGS |
AWWA C110/A21.10 : 2012 | DUCTILE-IRON AND GRAY-IRON FITTINGS |
ASTM B 160 : 2005 : EDT 1 | Standard Specification for Nickel Rod and Bar |
ASTM A 453/A453M : 2017 : REDLINE | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
ASTM D 2241 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
ASTM D 2468 : 1996 : REV A | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 (Withdrawn 2003) |
CSA Z245.1 : 2014 | STEEL PIPE |
ASTM A 217/A217M : 2014 : REDLINE | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
MSS SP 119 : 2010 | FACTORY-MADE WROUGHT BELLED END PIPE FITTINGS FOR SOCKET-WELDING |
ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
AWWA C301 : 2014 | PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE |
MSS SP 95 : 2014 | SWAGE(D) NIPPLES AND BULL PLUGS |
MSS SP 93 : 2014 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - LIQUID PENETRANT EXAMINATION METHOD |
MSS SP 44 : 2016 | STEEL PIPELINE FLANGES |
API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
ASTM E 125 : 1963 : R2003 | Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
AWS A5.9/A5.9M : 2012 | SPECIFICATION FOR BARE STAINLESS STEEL WELDING ELECTRODES AND RODS |
ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
ASTM E 272 : 2015 : REDLINE | Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
ASTM F 1055 : 2016-09 | SPECIFICATION FOR ELECTROFUSION TYPE POLYETHYLENE FITTINGS FOR OUTSIDE DIAMETER CONTROLLED POLYETHYLENE AND CROSSLINKED POLYETHYLENE (PEX) PIPE AND TUBING |
MSS SP 106 : 2012 | CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300 |
ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
ASTM B 43 : 2015 : REDLINE | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
ASTM A 139/A139M : 2016 : REDLINE | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
ASTM A 530/A530M : 2012-06 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE |
MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
ASME B16.4 : 2016 | GRAY IRON THREADED FITTINGS: CLASSES 125 AND 250 |
ASME PTC19.3 TW : 2016 | THERMOWELLS |
MSS SP 71 : 2011 | GRAY IRON SWING CHECK VALVES, FLANGED AND THREADED ENDS |
ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
MSS SP 75 : 2014 | HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS |
ASME B16.50 : 2013 | WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS |
API 603 : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
MSS SP 9 : 2013 | SPOT FACING FOR BRONZE, IRON AND STEEL FLANGES |
MSS SP 88 : 2015 | DIAPHRAGM VALVES |
ASTM A 672/A672M : 2014 : REDLINE | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
ASTM E 310 : 2015 : REDLINE | Standard Reference Radiographs for Tin Bronze Castings |
ASTM A 276/A276M : 2017 : REDLINE | Standard Specification for Stainless Steel Bars and Shapes |
ASTM B21/B 21M : 2014-10 | SPECIFICATION FOR NAVAL BRASS ROD, BAR, AND SHAPES |
ASTM C 599 : 1991 : R1995 : EDT 1 | Standard Specification for Conical Process Glass Pipe and Fittings (Withdrawn 2002) |
MSS SP 85 : 2011 | GRAY IRON GLOBE & ANGLE VALVES, FLANGED AND THREADED ENDS |
API 594 : 2017 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
ASTM B 62 : 2017 : REDLINE | Standard Specification for Composition Bronze or Ounce Metal Castings |
ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
ASTM A 203/A203M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel |
ASTM A 524 : 1996 | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
ASTM B 247 : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
ASTM B 381 : 2013 : REDLINE | SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS |
ASTM F 437 : 2015 : REDLINE | Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
ASTM D 3754 : 2014 : REDLINE | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
CGA G 4.1 : 2009 | CLEANING EQUIPMENT FOR OXYGEN SERVICE |
MSS SP 79 : 2011 | SOCKET WELDING REDUCER INSERTS |
ASTM D 2992 : 2012 | Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
ASTM D 2997 : 2015 : REDLINE | Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
ASTM D 3035 : 2015 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
CEN/TR 14549:2004 | Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive |
ASME B16.22 : 2013 | WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS |
ASTM A 815/A815M : 2017 | Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
AWWA C900 : 2016 | POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 4 IN. THROUGH 60 IN. (100 MM THROUGH 1,500 MM) |
ASTM A 494/A494M : 2017-03 | SPECIFICATION FOR CASTINGS, NICKEL AND NICKEL ALLOY |
ASTM D 2447 : 2003 | Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010) |
MSS SP 43 : 2013 | WROUGHT AND FABRICATED BUTT-WELDING FITTINGS FOR LOW PRESSURE, CORROSION RESISTANT APPLICATIONS |
AWS A3.0M/A3.0 : 2010 | STANDARD WELDING TERMS AND DEFINITIONS INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
ASME B16.25 : 2012 | BUTTWELDING ENDS |
ASTM A 285/A285M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
MSS SP 105 : 2016 | INSTRUMENT VALVES FOR CODE APPLICATIONS |
AWS A5.8 : 1992 | FILLER METALS FOR BRAZING AND BRAZE WELDING, SPECIFICATION FOR |
ASME B16.48 : 2015 | LINE BLANKS |
ASTM A 302/A302M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
ASME B16.3 : 2016 | MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300 |
ASTM B 333 : 2003 | Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.