IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Information technology equipment - Safety - Part 1: General requirements
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
02-04-2024
Language(s)
English - French
Published date
28-05-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
0 Principles of safety
1 General
2 Protection from hazards
3 Wiring, connections and supply
4 Physical requirements
5 Electrical requirements and simulated abnormal
conditions
6 Connection to telecommunication networks
7 Connection to cable distribution systems
Annex A (normative) - Tests for resistance to
heat and fire
Annex B (normative) - Motor tests under abnormal
conditions
Annex C (normative) - Transformers
Annex D (normative) - Measuring instruments for
touch current tests
Annex E (normative) - Temperature rise of a winding
Annex F (normative) - Measurement of clearances and
creepage distances
Annex G (normative) - Alternative method for determining
minimum clearances
Annex H (normative) - Ionizing radiation
Annex J (normative) - Table of electrochemical potentials
Annex K (normative) - Thermal controls
Annex L (normative) - Normal load conditions for some types
of electrical business equipment
Annex M (normative) - Criteria for telephone ringing signals
Annex N (normative) - Impulse test generators
Annex P (normative) - Normative references
Annex Q (normative) - Voltage dependent resistors (VDRs)
Annex R (informative) - Examples of requirements for quality
control programmes
Annex S (informative) - Procedure for impulse testing
Annex T (informative) - Guidance on protection against
ingress of water
Annex U (normative) - Insulated winding wires for use
without interleaved insulation
Annex V (normative) - AC power distribution systems
Annex W (informative) - Summation of touch currents
Annex X (informative) - Maximum heating effect in
transformer tests
Annex Y (normative) - Ultraviolet light conditioning test
Annex Z (informative) - Overvoltage categories
Annex AA (normative) - Mandrel test
Annex BB (informative) - Changes in the second edition
Annex CC (normative) - Evaluation of integrated circuit
(IC) current limiters
Annex DD (normative) - Requirements for the mounting
means of rack-mounted equipment
Annex EE (normative) - Household and home/office
document/media shredders
Bibliography
Index
IEC 60950-1:2005+A1:2009+A2:2013 is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. Also applicable are components and subassemblies intended for incorporation in information technology equipment. It is not expected that such components and subassemblies comply with every aspect of the standard, provided that the complete information technology equipment, incorporating such components and subassemblies, does comply. The contents of the corrigendum of August 2006 have been included in this copy. This consolidated version consists of the second edition (2005), its amendment 1 (2009) and its amendment 2 (2013). Therefore, no need to order amendments in addition to this publication.
| Committee |
TC 108
|
| DevelopmentNote |
Supersedes IEC 60950. (01/2002) Stability Date: 2017. (10/2012) COR 2 applies to the French text only. (08/2013)
|
| DocumentType |
Standard
|
| Pages |
648
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| NEN EN IEC 60950-1 : 2006 AMD 2 2013 | Identical |
| GOST IEC 60950-1 : 2014 | Identical |
| SN EN 60950-1 : 2006 AMD 12 2011 | Identical |
| NF EN 60950-1 : 2006 AMD 2 2014 | Identical |
| EN 60950-1:2006/A2:2013 | Identical |
| UNE-EN 60950-1:2007 | Identical |
| GOST R IEC 60950-1 : 2009 | Identical |
| 08/30180887 DC : DRAFT MAY 2008 | BS EN 50131-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| I.S. EN 60335-1:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60601-2-66 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-66: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEARING INSTRUMENTS AND HEARING INSTRUMENT SYSTEMS |
| ISO 9241-940:2017 | Ergonomics of human-system interaction — Part 940: Evaluation of tactile and haptic interactions |
| I.S. EN 62149-5:2011 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
| 05/30106456 DC : DRAFT AUG 2005 | IEC 62282-6 - FUEL CELL TECHNOLOGIES - PART 6-1: MICRO FUEL CELL POWER SYSTEMS - SAFETY |
| 15/30259978 DC : 0 | BS EN 62477-2 - SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 2: POWER ELECTRONIC CONVERTERS FROM 1000 V A.C. OR 1500 V D.C. UP TO 36 KV A.C. OR 54 KV D.C. |
| CSA ISO/IEC 22092 : 2004 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 130 MM MAGNETO-OPTICAL DISK CARTRIDGES - CAPACITY: 9,1 GBYTES PER CARTRIDGE |
| BS EN 60669-2-5:2016 | Switches for household and similar fixed electrical installations Particular requirements. Switches and related accessories for use in home and building electronic systems (HBES) |
| I.S. EN IEC 62820-2:2018 | BUILDING INTERCOM SYSTEMS - PART 2: REQUIREMENTS FOR ADVANCED SECURITY BUILDING INTERCOM SYSTEMS (ASBIS) |
| ISO/IEC 14762:2009 | Information technology Functional safety requirements for Home and Building Electronic Systems (HBES) |
| 17/30356609 DC : 0 | BS ISO 8100-2 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 2: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS |
| CEI EN 60950-21 : 2004 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 21: REMOTE POWER FEEDING |
| CEI EN 62282-6-300 : 2013 | FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY |
| BS EN 62149-2:2014 | Fibre optic active components and devices. Performance standards 850 nm discrete vertical cavity surface emitting laser devices |
| CEI EN 60728-3 : 2011 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS |
| BS EN 62282-3-1:2007 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| BS EN 62149-7:2012 | Fibre optic active components and devices. Performance standards 1310 nm discrete vertical cavity surface emitting laser devices |
| 14/30295302 DC : 0 | BS EN 61587-1 ED. 4.0 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITIONS |
| 12/30258455 DC : 0 | FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| 09/30186728 DC : 0 | BS EN 62040-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| ECMA 341 : 4ED 2010 | ENVIRONMENTAL DESIGN CONSIDERATIONS FOR ICT & CE PRODUCTS |
| EN 63002:2017 | Identification and communication interoperability method for external power supplies used with portable computing devices |
| I.S. EN 63024:2018 | REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT-BREAKERS, RCBOS AND RCCBS FOR HOUSEHOLD AND SIMILAR USES |
| BS EN 50468:2009 | Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports |
| BS EN 60695-1-10:2017 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. General guidelines |
| 10/30210160 DC : 0 | BS ISO 12239 - SMOKE ALARMS |
| 12/30269195 DC : 0 | BS ISO/IEC 30190 - INFORMATION TECHNOLOGY - DIGITALLY RECORDED MEDIA FOR INFORMATION INTERCHANGE AND STORAGE - 120 MM SINGLE LAYER (25,0 GBYTES PER DISK) AND DUAL LAYER (50,0 GBYTES PER DISK) BD RECORDABLE DISK (BD-RSL/DL) |
| BS EN 81-40:2008 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
| BS EN 61851-23:2014 | Electric vehicle conductive charging system DC electric vehicle charging station |
| I.S. EN 61810-1:2015 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
| 08/30170297 DC : DRAFT MAR 2008 | BS EN 62083 - MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS |
| ISO/IEC 30192:2016 | Information technology Digitally recorded media for information interchange and storage 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk |
| BS EN 62820-1-1:2016 | Building intercom systems System requirements. General |
| BS EN 62471-5:2015 | Photobiological safety of lamps and lamp systems Image projectors |
| ISO/IEC 18012-1:2004 | Information technology Home Electronic System Guidelines for product interoperability Part 1: Introduction |
| 13/30277888 DC : 0 | BS EN 62149-2 ED 2.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 2: 850 NM DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER DEVICES |
| I.S. EN 1010-2:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| BS EN 62282-6-300:2013 | Fuel cell technologies Micro fuel cell power systems. Fuel cartridge interchangeability |
| IEC 62851-3:2014 | Alarm and electronic security systems - Social alarm systems - Part 3: Local unit and controller |
| 11/30258040 DC : 0 | BS EN 61810-1 - ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL REQUIREMENTS |
| 14/30315340 DC : 0 | BS EN 60601-2-66 ED.2 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-66: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEARING INSTRUMENTS AND HEARING INSTRUMENT SYSTEMS |
| BS EN 62149-4:2010 | Fibre optic active components and devices. Performance standards 1300 nm fibre optic transceivers for Gigabit Ethernet application |
| I.S. EN 62056-7-5:2016 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 7-5: LOCAL DATA TRANSMISSION PROFILES FOR LOCAL NETWORKS (LN) |
| 13/30267662 DC : 0 | BS EN ISO 17409 - ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS |
| BS ISO/IEC 30193:2016 | Information technology — Digitally recorded media for information interchange and storage — 120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk |
| BS EN 62345:2005 | ID format for 50 mm magneto-optical disc system |
| CEI EN 62488-2 : 1ED 2018 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| CLC/TR 62102:2006 | Electrical safety - Classification of interfaces for equipment to be connected to information and communications technology networks |
| BS EN 50090-2-3:2005 | Home and building electronic systems (HBES) System overview. General functional safety requirements for products intended to be integrated in HBES |
| BS EN 60601-1-12:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
| BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| 09/30189092 DC : 0 | BS EN 60297-3-106 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-106: ADAPTATION DIMENSIONS FOR SUBRACKS APPLICABLE IN METRIC CABINETS IN ACCORDANCE WITH IEC 60917-2-1 |
| BS EN 62282-3-100:2012 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| EN IEC 61730-1:2018/AC:2018-06 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016) |
| BS EN 50132-1:2010 | Alarm systems. CCTV surveillance systems for use in security applications System requirements |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| 16/30340114 DC : 0 | BS EN 62820-2 - BUILDING INTERCOM SYSTEMS - PART 2: REQUIREMENTS FOR ADVANCED SECURITY BUILDING INTERCOM SYSTEMS |
| 17/30345266 DC : 0 | BS ISO 6469-3 - ELECTRICALLY PROPELLED ROAD VEHICLES - SAFETY SPECIFICATIONS - PART 3: ELECTRICAL SAFETY |
| 17/30371228 DC : 0 | BS EN 62149-3 ED.3.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 3: MODULATOR-INTEGRATED LASER DIODE TRANSMITTERS FOR 2;5-GBIT/S TO 40-GBIT/S FIBRE OPTIC TRANSMISSION SYSTEMS |
| EN IEC 61730-2:2018/AC:2018-06 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016) |
| CAN/CSA-C22.2 NO. 80601-2-72:17 | Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (Adopted ISO 80601-2-72:2015, first edition, 2015-09-01, with Canadian deviations) |
| BS EN 62353:2014 | Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment |
| BS EN 50116:2006 | Information technology equipment. Routine electrical safety testing in production |
| EN 62949:2017 | Particular safety requirements for equipment to be connected to information and communication networks |
| CSA ISO/IEC 18012-1 : 2005 : R2010 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM - GUIDELINES FOR PRODUCT INTEROPERABILITY - PART 1: INTRODUCTION |
| UNI EN 81-40 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIR LIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| BS EN 50131-1 : 2006 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS |
| CEI EN 50557 : 2012 | REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES |
| INCITS/ISO/IEC 22092 : 2002 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 130 MM MAGNETO-OPTICAL DISK CARTRIDGES - CAPACITY: 9,1 GBYTES PER CARTRIDGE |
| CSA ISO/IEC 22050 : 2004 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT |
| IEC TR 60930:2008 | Guidelines for administrative, medical and nursing staff concerned with the safe use of medical electrical equipment and medical electrical systems |
| CSA ISO/IEC 16449 : 2004 | INFORMATION TECHNOLOGY - 80 MM DVD - READ-ONLY DISK |
| I.S. EN 62345:2005 | ID FORMAT FOR 50 MM MAGNETO-OPTICAL DISC SYSTEM |
| IEC 60974-1:2017 | Arc welding equipment - Part 1: Welding power sources |
| EN 81-41:2010 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| CSA C22.2 No. 80601-2-58 : 2010 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-58: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF LENS REMOVAL DEVICES AND VITRECTOMY DEVICES FOR OPHTHALMIC SURGERY |
| I.S. EN 62109-1:2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 62040-1 : 2008 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS |
| BS EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services Safety |
| I.S. EN 14154-4:2014 | WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES |
| I.S. EN 60601-2-66:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART-2-66: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEARING INSTRUMENTS AND HEARING INSTRUMENT SYSTEMS |
| BS EN 50539-11 : 2013 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| I.S. EN IEC 63044-3:2018 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS |
| I.S. EN 61347-1:2015 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 62282-6-100:2010 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010 (EQV)) |
| ISO 13400-3:2016 | Road vehicles Diagnostic communication over Internet Protocol (DoIP) Part 3: Wired vehicle interface based on IEEE 802.3 |
| BS EN 50174-3 : 2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| NF EN 62310-1 : 2005 | STATIC TRANSFER SYSTEM (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 61851-1:2011 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
| I.S. EN IEC 61730-1:2018 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| NF EN 62052-31 : 2017 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS |
| NF EN 50556 : 2011 | ROAD TRAFFIC SIGNAL SYSTEMS |
| NF EN 50116 : 2007 | INFORMATION TECHNOLOGY EQUIPMENT - ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION |
| UNE-EN 50468:2010 | Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports |
| NF EN 50486 : 2008 | EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS |
| UNE-EN 60728-3:2012 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
| NF EN 60950-22 : 2017 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| I.S. EN 41003:2008 | PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO TELECOMMUNICATION NETWORKS AND/OR A CABLE DISTRIBUTION SYSTEM |
| IEC 61730-1:2016 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 60950-22:2017 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
| CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| NF EN 60728-11 : 2005 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
| 15/30319022 DC : 0 | BS EN 60990 ED 3.0 - METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT |
| 09/30162904 DC : 0 | BS EN 61204-3 - LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC) |
| 06/30158289 DC : 0 | BS EN 62040-1 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| PD IEC/TR 62368-2:2015 | Audio/video, information and communication technology equipment Explanatory information related to IEC 62368-1 |
| BS EN 13160-1:2003 | Leak detection systems General principles |
| IEC 60950-21:2002 | Information technology equipment - Safety - Part 21: Remote power feeding |
| BS EN 61347-1:2015 | Lamp controlgear General and safety requirements |
| 14/30287195 DC : 0 | BS ISO 18246 - ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY |
| 05/30060689 DC : DRAFT JUN 2005 | IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY |
| 13/30238229 DC : 0 | BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS |
| 16/30350625 DC : 0 | BS EN 62485-5 ED 1.0 - SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 5: LITHIUM-ION BATTERIES FOR STATIONARY APPLICATIONS |
| BS EN 62477-1 : 2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012) |
| IEC 62149-3:2014 | Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems |
| IEC 60839-11-1:2013 | Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements |
| IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
| BS EN ISO 16201:2006 | Technical aids for disabled persons. Environmental control systems for daily living |
| BS EN 62040-1-2:2003 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| EN 60695-1-10:2017 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| EN 60598-2-12:2013 | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights |
| EN 62052-31:2016 | Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests |
| EN 60896-22:2004 | Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
| EN 1010-2:2006+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
| EN 60950-23:2006/corrigendum:2008 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT |
| EN 62282-3-1 : 2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| EN 62149-7:2012 | Fibre optic active components and devices - Performance standards - Part 7: 1 310 nm discrete vertical cavity surface emitting laser devices |
| EN 61587-4:2012 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of performance levels for modular cabinets |
| EN 62345:2005 | ID format for 50 mm magneto-optical disc system |
| EN 50132-5-3:2012 | Alarm systems - CCTV surveillance systems for use in security applications - Part 5-3: Video transmission - Analogue and digital video transmission |
| EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| IEC 61204-3:2016 RLV | Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
| IEC 60695-1-10:2016 RLV | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
| EN 50539-11 : 2013 AMD 1 2014 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| EN 61347-2-13:2014/A1:2017 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
| EN 60839-11-2:2015/AC:2015 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-2: ELECTRONIC ACCESS CONTROL SYSTEMS - APPLICATION GUIDELINES (IEC 60839-11-2:2014) |
| EN 80601-2-58:2015 | Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 60990:2016 | Methods of measurement of touch current and protective conductor current |
| EN 62040-5-3:2017 | Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements |
| EN 60669-2-5:2016 | Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) |
| EN 60825-2:2004/A2:2010 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| EN 60839-11-1:2013/AC:2015 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013) |
| EN 61131-2:2007 | Programmable controllers - Part 2: Equipment requirements and tests |
| EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
| EN IEC 62485-2:2018 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| EN 61558-2-16:2009/A1:2013 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1 100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS (IEC 61558-2-16:2009/A1:2013) |
| EN 62676-1-1:2014/AC:2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL (IEC 62676-1-1:2013) |
| EN 50332-2:2013 | Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design |
| EN 62684:2010 | Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones |
| EN 62040-1-2:2003/corrigendum:2004 | |
| EN 50514:2014 | Audio, video and information technology equipment - Routine electrical safety testing in production |
| EN 13160-1:2016 | Leak detection systems - Part 1: General Principles |
| HD 638 S1:2001/A1:2006 | ROAD TRAFFIC SIGNAL SYSTEMS |
| EN 62353:2014 | Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment |
| EN 62149-8:2014 | Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical amplifier devices |
| I.S. EN ISO 16201:2006 | TECHNICAL AIDS FOR DISABLED PERSONS - ENVIRONMENTAL CONTROL SYSTEMS FOR DAILY LIVING |
| NF EN ISO 16201 : 2007 | TECHNICAL AIDS FOR PERSONS WITH DISABILITY - ENVIRONMENTAL CONTROL SYSTEMS FOR DAILY LIVING |
| IPC 9592 : B | REQUIREMENTS FOR POWER CONVERSION DEVICES FOR THE COMPUTER AND TELECOMMUNICATIONS INDUSTRIES |
| ISO/IEC 14709-1:1997 | Information technology Configuration of Customer Premises Cabling (CPC) for applications Part 1: Integrated Services Digital Network (ISDN) basic access |
| DIN EN 1010-2:2011-05 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery (includes Amendment A1:2010) |
| EN 300 132-1 : 2.0.1 DRAFT | ENVIRONMENTAL ENGINEERING (EE); POWER SUPPLY INTERFACE AT THE INPUT TO INFORMATION AND COMMUNICATION TECHNOLOGY (ICT) EQUIPMENT; PART 1: OPERATED BY ALTERNATING CURRENT (AC) SOURCE |
| BS EN 60601-1-11:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
| BS EN 62149-8:2014 | Fibre optic active components and devices. Performance standards Seeded reflective semiconductor optical amplifier devices |
| 06/30127082 DC : 0 | EN 50486 - EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR - ENTRY SYSTEMS |
| NF EN 50557 : 2012 | REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES |
| 06/30157062 DC : 0 | BS EN 62310-3 - STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| BS EN 62149-9:2014 | Fibre optic active components and devices. Performance standards Seeded reflective semiconductor optical amplifier transceivers |
| I.S. EN 62471-5:2015 | PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 5: IMAGE PROJECTORS |
| BS EN 81-41:2010 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Vertical lifting platforms intended for use by persons with impaired mobility |
| 17/30352704 DC : 0 | BS IEC 62149-10 ED1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 10: ROF (RADIO OVER FIBER) TRANSCEIVERS FOR MOBILE FRONTHAUL |
| BS EN 62282-5-1:2012 | Fuel cell technologies Portable fuel cell power systems. Safety |
| I.S. EN 60950-23:2008 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT |
| BS EN 62310-3:2008 | Static transfer systems (STS) Method for specifying performance and test requirements |
| BS EN 62075:2012 | Audio/video, information and communication technology equipment. Environmentally conscious design |
| CSA C22.2 No. 60065 : 2016 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| PD CLC/TR 50656:2016 | SPD application in conjunction with Class II equipment |
| BS ISO 6469-3:2011 | Electrically propelled road vehicles. Safety specifications Protection of persons against electric shock |
| NF EN 62310-3 : 2008 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| DIN EN ISO 17409:2016-09 (Draft) | ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS (ISO 17409:2015, CORRECTED VERSION 2015-12-15) |
| I.S. EN 50132-5-3:2012 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION |
| DIN EN 14154-4:2015-02 | Water meters - Part 4: Additional functionalities |
| INCITS/ISO/IEC 16448 : 2002 : R2007 | INFORMATION TECHNOLOGY - 120 MM DVD - READ-ONLY DISK |
| I.S. EN 62949:2017 | PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATION NETWORKS |
| 13/30279449 DC : 0 | BS EN 62149-3 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 3: MODULATOR-INTEGRATED LASER DIODE TRANSMITTERS FOR 2.5-GBIT/S TO 40-GBIT/S FIBRE OPTIC TRANSMISSION SYSTEMS |
| UNI EN 81-41 : 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| 14/30280175 DC : 0 | BS EN 61204-7 - LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS |
| BS EN 15437-1:2009 | Railway applications. Axlebox condition monitoring. Interface and design requirements Track side equipment and rolling stock axlebox |
| ISO/IEC 20162:2001 | Information technology Data interchange on 300 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects Capacity: 30 Gbytes per cartridge |
| PD ISO/IEC TR 29125:2010 | Information technology. Telecommunications cabling requirements for remote powering of terminal equipment |
| 13/30280858 DC : 0 | BS EN 60940 - GUIDANCE INFORMATION ON THE APPLICATION OF CAPACITORS, RESISTORS, INDUCTORS AND COMPLETE FILTER UNITS FOR RADIO INTERFERENCE SUPPRESSION - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 |
| 13/30281665 DC : 0 | BS EN 50332-2 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY |
| BS ISO 17409 : 2015 | ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS |
| BS EN 81-50:2014 | Safety rules for the construction and installation of lifts. Examinations and tests Design rules, calculations, examinations and tests of lift components |
| DIN EN ISO 80601-2-72:2016-04 | Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) |
| 13/30279156 DC : 0 | BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| 14/30297921 DC : 0 | BS EN 62040-5-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS FOR D.C. UPS |
| BS EN 62040-5-3:2017 | Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements |
| CEI EN 62149-4 : 2011 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 4: 1300 NM FIBRE OPTIC TRANSCEIVERS FOR GIGABIT ETHERNET APPLICATION |
| BS EN 63002 : 2017 | IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES |
| 14/30301251 DC : 0 | BS EN 13160-1 - LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| BS EN 60896-21:2004 | Stationary lead-acid batteries Valve regulated types. Methods of test |
| BS EN 60974-1:2012 | Arc welding equipment Welding power sources |
| I.S. EN 62282-3-1:2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| UNE-EN 60601-2-66:2016 | Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems |
| 07/30161236 DC : 0 | BS EN 60297-3-105 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-105: DIMENSIONS AND DESIGN ASPECTS FOR 1U CHASSIS |
| BS EN 62949:2017 | Particular safety requirements for equipment to be connected to information and communication technology networks |
| 07/19986727 DC : 0 | BS EN 50132-1 - ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS |
| UTEC 77 240 : 2005 | SAFETY ASPECTS FOR XDSL SIGNALS ON CIRCUITS CONNECTED TO TELECOMMUNICATION NETWORKS (DSL: DIGITAL SUBSCRIBER LINE) |
| NF EN 62820-1-1 : 2016 | BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
| 16/30320624 DC : 0 | BS ISO 13400-3 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER INTERNET PROTOCOL (DOIP) - PART 3: WIRED VEHICLE INTERFACE BASED ON IEEE 802.3 |
| BS ISO/IEC 18046-4:2015 | Information technology. Radio frequency identification device performance test methods Test methods for performance of RFID gates in libraries |
| NF EN 41003 : 2009 | PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO TELECOMMUNICATION NETWORKS AND/OR A CABLE DISTRIBUTION SYSTEM |
| BS EN 60601-2-66:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems |
| IEC 61204-3:2016 | Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
| NF EN 60950-21 : 2003 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 21: REMOTE POWER FEEDING |
| BS EN 62149-5:2011 | Fibre optic active components and devices. Performance standards ATM-PON transceivers with LD driver and CDR ICs |
| BS ISO 12643-2:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Prepress and press equipment and systems |
| I.S. EN 61851-23:2014 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION |
| BS EN 61587-4:2012 | Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Combination of performance levels for modular cabinets |
| CEI EN 62056-7-5 : 1ED 2017 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 7-5: LOCAL DATA TRANSMISSION PROFILES FOR LOCAL NETWORKS (LN) |
| TR 102 336 : 1.1.1 | ENVIRONMENTAL ENGINEERING (EE); POWER AND COOLING SYSTEM CONTROL AND MONITORING GUIDANCE |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| BS EN IEC 63044-3:2018 | Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Electrical safety requirements |
| BS EN 60940:2015 | Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression |
| 03/306253 DC : DRAFT MAY 2003 | IEC 60728-11 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY REQUIREMENTS |
| PD IEC/TR 62296:2009 | Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements |
| CEI EN 62274 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - SAFETY OF RADIOTHERAPY RECORD AND VERIFY SYSTEMS |
| 17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| 15/30309542 DC : DRAFT MAY 2015 | BS EN 62820-1-1 ED 1.0 - BUILDING INTERCOM SYSTEMS - PART 1-1: GENERAL REQUIREMENTS |
| CEI EN 50486 : 2009 | EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS |
| I.S. EN 60728-11:2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
| I.S. EN 62676-1-1:2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
| CEI EN 50131-1 : 2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS |
| 09/30189100 DC : 0 | BS EN 60917-2-4 - MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES - PART 2-4: SECTIONAL SPECIFICATION - INTERFACE COORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE - ADAPTATION DIMENSIONS FOR SUBRACKS APPLICABLE IN CABINETS IN ACCORDANCE WITH IEC 60297-3-100 (19 IN) |
| CAN/CSA-ISO/IEC 20062-04 (R2012) | Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - VXA-1 Format (Adopted ISO/IEC 20062:2001, first edition, 2001-12-15) |
| TS 101 548 : 2.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); EUROPEAN REQUIREMENTS FOR REVERSE POWERING OF REMOTE ACCESS EQUIPMENT |
| CSA ISO/IEC 20062 : 2004 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - VXA-1 FORMAT |
| UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
| IEC TS 62700:2014 | DC power supply for notebook computers |
| IEC 62949:2017 | Particular safety requirements for equipment to be connected to information and communication technology networks |
| BS EN 61587-1:2017 | Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation |
| I.S. EN 62282-3-100:2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV)) |
| IEC PAS 62282-6-1:2006 | Fuel cell technologies - Part 6-1: Micro fuel cell power systems - Safety |
| CSA C22.2 No. 60601-1-12 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT |
| I.S. EN ISO 17409:2017 | ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS (ISO 17409:2015, CORRECTED VERSION 2015-12-15) |
| BIS IS 13252-22 : 2014 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| IEC 62642-1:2010 | Alarm systems - Intrusion and hold-up systems - Part 1: System requirements |
| I.S. EN 61558-2-16:2009 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS |
| ANSI/AAMI/IEC 80601-2-58:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-58: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF LENS REMOVAL AND VITRECTOMY DEVICES FOR OPHTHALMIC SURGERY |
| UTEC 77 220 : 2006 | ELECTRICAL SAFETY - CLASSIFICATION OF INTERFACES FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATIONS TECHNOLOGY NETWORKS |
| I.S. EN 50131-4:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| I.S. EN 62040-5-3:2017 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS |
| I.S. EN 62310-1:2005 | STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 61587-4:2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 4: COMBINATION OF PERFORMANCE LEVELS FOR MODULAR CABINETS (IEC 61587-4:2012 (EQV)) |
| I.S. EN 50539-11:2013 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| I.S. EN 60384-14:2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS |
| ISO/IEC 18046-4:2015 | Information technology Radio frequency identification device performance test methods Part 4: Test methods for performance of RFID gates in libraries |
| UNI EN ISO 80601-2-55 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| IEC 62684:2018 | Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones |
| CEI EN 62684 : 2011 | INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES |
| CEI EN 50174-3 : 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| I.S. EN IEC 62485-2:2018 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| DIN EN 81-40:2009-04 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| ISO/IEC TR 29125:2010 | Information technology Telecommunications cabling requirements for remote powering of terminal equipment |
| I.S. EN 60950-21:2003 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - REMOTE POWER FEEDING |
| BIS IS 16242-1 : 2014 AMD 1 2018 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS |
| I.S. EN 60728-3:2011 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS |
| ISO 12239:2010 | Smoke alarms using scattered light, transmitted light or ionization |
| NF EN 61851-23 : 2014 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION |
| ISO/IEC 29171:2009 | Information technology Digitally recorded media for information interchange and storage Information Versatile Disk for Removable usage (iVDR) cartridge |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| CEI CLC/TS 62367 : 2005 | SAFETY ASPECTS FOR XDSL SIGNALS ON CIRCUITS CONNECTED TO TELECOMMUNICATION NETWORKS (DSL: DIGITAL SUBSCRIBER LINE) |
| CEI EN 50131-4 : 2010 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
| ISO/IEC 16448:2002 | Information technology — 120 mm DVD — Read-only disk |
| EN 50310:2016 | Telecommunications bonding networks for buildings and other structures |
| IEC TR 62296:2009 | Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements |
| I.S. EN 62040-1-2:2004 | |
| ANSI/AAMI/IEC TIR62354:2015 | GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT |
| I.S. EN 62083:2009 | MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS |
| IEC PAS 62282-6-150:2011 | Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN Devision 4.3) compounds in indirect PEM fuel cells |
| I.S. EN 62040-3:2011 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| I.S. EN 62040-1:2008 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008 (EQV)) |
| I.S. EN 50131-1:2006 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS |
| IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
| AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| IEC 60204-33:2009 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| IEEE C62.36-2014 REDLINE | IEEE Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits |
| DIN EN 12182:2012-07 | Assistive products for persons with disability - General requirements and test methods |
| DIN EN 13617-1:2012-08 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| DIN EN 14604:2016-02 (Draft) | Smoke alarm devices; German and English version prEN 14604:2016 |
| BS EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles. Safety requirements for conductive connection to an external electric power supply |
| 14/30282403 DC : 0 | BS ISO/IEC 30129 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT |
| IEC 62353:2014 | Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment |
| EN 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| BS EN 61131-2:2007 | Programmable controllers Equipment requirements and tests |
| BS EN 15095 : 2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| UNE-HD 60364-4-444:2013 | Low-voltage electrical installations -- Part 4-444: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| UNE-EN 50310:2016 | Telecommunications bonding networks for buildings and other structures |
| 11/30252196 DC : 0 | BS EN 61347-1:2008 + A2 - LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| UNE-EN 61851-1:2012 | Electric vehicle conductive charging system - Part 1: General requirements |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| I.S. EN 14678-1:2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| SCTE 186 : 2016 | PRODUCT ENVIRONMENTAL REQUIREMENTS FOR CABLE TELECOMMUNICATIONS |
| I.S. EN 15095:2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| I.S. EN 12182:2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 62282-2:2012 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
| I.S. EN 60825-2:2004 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| I.S. EN 13160-1:2016 | LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| CEI EN 62282-2 : 2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| I.S. EN 61918:2013 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
| I.S. EN 13617-1:2012 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| IEC 62684:2018 RLV | Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones |
| NEMA RT 1:2014 | Gating Interface |
| VDI 4478 Blatt 1:2013-07 | Test procedure for standardizing the definition of performance of RFID gates for use in libraries |
| CAN/CSA-ISO/IEC 22092-04 (R2012) | Information Technology - Data Interchange on 130 mm Magneto-Optical Disk Cartridges - Capacity: 9,1 Gbytes per Cartridge (Adopted ISO/IEC 22092:2002, first edition, 2002-07-01) |
| UNE-EN 50557:2012 | Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
| CSA C22.2 No. 60601-1-11 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| UNE-EN 50556:2011 | Road traffic signal systems |
| EN 61810-1:2015/AC:2018-04 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018) |
| NF EN 62149-5 : 2011 | FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
| 09/30207158 DC : 0 | BS EN 62642-1 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS |
| 17/30352643 DC : 0 | BS IEC 62684 ED2.0 - INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES |
| 14/30296572 DC : 0 | BS EN 60601-1-11 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| 16/30312315 DC : 0 | BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| PREN 50332-2 : DRAFT 2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY |
| CEI EN 60896-22 : 2005 | STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS |
| BS ISO 13063:2012 | Electrically propelled mopeds and motorcycles. Safety specifications |
| BS EN 62488-2:2017 | Power line communication systems for power utility applications Analogue power line carrier terminals or APLC |
| EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| BS EN 62282-6-100 : 2010 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY |
| CEI EN 60896-21 : 2005 | STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST |
| TS 102 873 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); OPTICAL EXTERNAL NETWORK TESTING INTERFACE |
| ES 202 336-8 : 1.1.1 | ENVIRONMENTAL ENGINEERING (EE); MONITORING AND CONTROL INTERFACE FOR INFRASTRUCTURE EQUIPMENT (POWER, COOLING AND BUILDING ENVIRONMENT SYSTEMS USED IN TELECOMMUNICATION NETWORKS); PART 8: REMOTE POWER FEEDING SYSTEM CONTROL AND MONITORING INFORMATION MODEL |
| 15/30327916 DC : 0 | BS EN 63002 ED. 1.0 - DENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNALPOWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES (TA 14) |
| ANSI/AAMI/IEC TIR62348:2012 | ASSESSMENT OF THE IMPACT OF THE MOST SIGNIFICANT CHANGES IN AMENDMENT 1 TO IEC 60601-1:2005 AND MAPPING OF THE CLAUSES OF IEC 60601-1:2005 TO THE PREVIOUS EDITION |
| I.S. EN 60974-1:2012 | ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012 (EQV)) |
| BS EN 14154-4:2014 | Water meters Additional functionalities |
| PREN 13617-1 : DRAFT 2010 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| BS EN 50514:2014 | Audio, video and information technology equipment. Routine electrical safety testing in production |
| BIS IS 13252-21 : 2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 21: REMOTE POWER FEEDING |
| BS EN 62310-1:2005 | Static transfer systems (STS) General and safety requirements |
| BS ISO 9241-940:2017 | Ergonomics of human-system interaction Evaluation of tactile and haptic interactions |
| NF EN 62018 : 2004 | POWER CONSUMPTION OF INFORMATION TECHNOLOGY EQUIPMENT - MEASUREMENT METHODS |
| BS EN 50332-1:2013 | Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology General method for \'one package equipment\' |
| IEC TS 60695-1-14:2017 | Fire hazard testing - Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products |
| BS EN 50486:2008 | Equipment for use in audio and video door-entry systems |
| I.S. EN 62149-7:2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 7: 1310 NM DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER DEVICES (IEC 62149-7:2012 (EQV)) |
| I.S. EN 62282-6-300:2013 | FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY (IEC 62282-6-300:2012 (EQV)) |
| 11/30246444 DC : 0 | BS EN 62075 ED 2.0 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
| 15/30297966 DC : 0 | BS EN 60950-22/ED2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| 12/30260552 DC : 0 | BS EN 50174-3:201X - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| CAN/CSA-ISO/IEC 18046-4:16 | Information technology Radio frequency identification device performance test methods Part 4: Test methods for performance of RFID gates in libraries (Adopted ISO/IEC 18046-4:2015, first edition, 2015-12-15) |
| 10/30219405 DC : 0 | BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| INCITS/ISO/IEC 16449 : 2002 | INFORMATION TECHNOLOGY - 80 MM DVD - READ-ONLY DISK |
| NF EN 62056-7-5 : 2017 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 7-5: LOCAL DATA TRANSMISSION PROFILES FOR LOCAL NETWORKS (LN) |
| 07/30167056 DC : 0 | BS EN 62149-2 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES. PERFORMANCE STANDARDS - PART 2: 850 NM DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER DEVICES |
| BS EN 1010-2 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| 16/30354071 DC : 0 | BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| UNI EN 81-50 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS |
| TS 102 874-6 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); EXTERNAL COMMON POWER SUPPLY FOR CUSTOMER PREMISES NETWORK AND ACCESS EQUIPMENT; PART 6: CPS TYPE 2.D IMPLEMENTATION DETAILS |
| I.S. EN ISO 18246:2017 | ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY (ISO 18246:2015) |
| UNI EN 12405-1 : 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| 09/30210369 DC : DRAFT SEP 2009 | IEC 61643-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING METHODS |
| 13/30281662 DC : 0 | BS EN 50332-1 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT" |
| INCITS/ISO/IEC 22050 : 2002 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT |
| CEI EN 50132-5-3 : 2013 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION |
| UNE-EN 62353:2015 | Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment |
| IEC TR 63054:2017 | Low-voltage switchgear and controlgear - Fire risk analysis and risk reduction measures |
| I.S. EN 60839-11-1:2013 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS |
| 04/30124466 DC : DRAFT OCT 2004 | EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| BS EN 41003:2009 | Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system |
| INCITS/ISO/IEC 20062 : 2001 : R2007 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - VXA-1 FORMAT |
| CEI EN 62282-3-100 : 2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| 07/30174056 DC : 0 | BS EN 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| BS EN 12966:2014 | Road vertical signs. Variable message traffic signs |
| NF EN 60601-1 : 2007-01 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| 08/30191345 DC : 0 | BS EN 60728-11 ED.3 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
| BIS IS 13252-23 : 2014 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT |
| CAN/CSA-ISO/IEC 16448-04 (R2012) | Information Technology - 120 mm DVD - Read-Only Disk (Adopted ISO/IEC 16448:2002, second edition, 2002-04-15) |
| ISO/IEC 30193:2016 | Information technology Digitally recorded media for information interchange and storage 120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk |
| PREN 50332-1 : DRAFT 2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT" |
| CEI EN 50468 : 2010 | RESISTIBILITY REQUIREMENTS TO OVERVOLTAGES AND OVERCURRENTS DUE TO LIGHTNING FOR EQUIPMENT HAVING TELECOMMUNICATION PORTS |
| BS ISO 13400-3:2016 | Road vehicles. Diagnostic communication over Internet Protocol (DoIP) Wired vehicle interface based on IEEE 802.3 |
| CEI EN 61587-1 : 2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION |
| BS EN 62676-1-1:2014 | Video surveillance systems for use in security applications System requirements. General |
| I.S. EN 60669-2-5:2016 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-5: PARTICULAR REQUIREMENTS - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) |
| CAN/CSA-B651.2-07 (R2017) | Accessible Design for Self-Service Interactive Devices |
| CSA C22.2 No. 61010.1 :2012 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 12966:2014 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| EN 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
| CSA ISO/IEC 18012-1 : 2005 : R2015 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM - GUIDELINES FOR PRODUCT INTEROPERABILITY - PART 1: INTRODUCTION |
| I.S. EN 81-50:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS |
| UNE-EN 62676-1-1:2015 | Video surveillance systems for use in security applications - Part 1-1: System requirements - General |
| INCITS/ISO/IEC 16449 : 2002 : R2007 | INFORMATION TECHNOLOGY - 80 MM DVD - READ-ONLY DISK |
| I.S. EN 50132-1:2010 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS |
| I.S. EN 62149-3:2014 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 3: MODULATOR-INTEGRATED LASER DIODE TRANSMITTERS FOR 2,5-GBIT/S TO 40-GBIT/S FIBRE OPTIC TRANSMISSION SYSTEMS |
| BS EN 62040-3:2011 | Uninterruptible power systems (UPS) Method of specifying the performance and test requirements |
| I.S. EN 50491-4-1:2012 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) |
| NF EN 50131-1 : 2007 AMD 2 2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS |
| NF EN 50131-4 : 2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| I.S. EN 61643-11:2012 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS |
| I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| UNE-EN 12405-1:2006 | Gas meters - Conversion devices - Part 1: Volume conversion |
| BS EN 60335-1 : 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| I.S. EN 60601-1-12:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT |
| AAMI/IEC TIR62296:2009 | |
| I.S. EN 62353:2014 | MEDICAL ELECTRICAL EQUIPMENT - RECURRENT TEST AND TEST AFTER REPAIR OF MEDICAL ELECTRICAL EQUIPMENT |
| IEC 62485-2:2010 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 50174-3:2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| ISO/IEC 16449:2002 | Information technology — 80 mm DVD — Read-only disk |
| I.S. EN 62488-2:2017 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| ECMA/TR 106 : 1ED 2013 | GUIDANCE AND COMPARISON BETWEEN 60950-1 AND 62368-1 |
| ISO 13063:2012 | Electrically propelled mopeds and motorcycles — Safety specifications |
| UNE-EN 62471-5:2016 | Photobiological safety of lamps and lamp systems - Part 5: Image projectors |
| I.S. EN 81-41:2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| BS EN 80601-2-58:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery |
| NF EN 81-41 : 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| I.S. EN 81-40:2008 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| I.S. EN IEC 61204-7:2018 | LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS |
| PREN 13160-1 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| CEI EN 62149-7 : 2013 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 7: 1310 NM DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER DEVICES |
| I.S. EN 62680-1-2:2017 | UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER - PART 1-2: COMMON COMPONENTS - USB POWER DELIVERY SPECIFICATION |
| UNE-EN 60669-2-5:2017 | Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) |
| IEC 62840-2:2016 | Electric vehicle battery swap system - Part 2: Safety requirements |
| IEC TR 62354:2014 | General testing procedures for medical electrical equipment |
| I.S. EN 50310:2016 | TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES |
| I.S. EN 63002:2017 | IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES |
| PREN 50174-3 : DRAFT 2012 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| EN IEC 63044-3:2018 | Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements |
| ASTM F 963 : 2017 : REDLINE | Standard Consumer Safety Specification for Toy Safety |
| CAN/CSA-C22.2 NO. 61010-1-12 (R2017) | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01) |
| I.S. EN 62149-4:2010 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 4: 1300 NM FIBRE OPTIC TRANSCEIVERS FOR GIGABIT ETHERNET APPLICATION |
| EN ISO 80601-2-55:2018 | Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2018) |
| UNE-EN 60728-11:2012 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| IEC 62040-1:2017 EXV | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS |
| IEC 61204-7:2016 EXV | LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS |
| I.S. EN 62041:2010 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS |
| IEC 62642-4:2010 | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
| IEC 61918:2013 | Industrial communication networks - Installation of communication networks in industrial premises |
| IEC 61730-2:2016 | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| UNE-EN 61347-1:2016 | Lamp controlgear - Part 1: General and safety requirements |
| IEC 62911:2016 | Audio, video and information technology equipment - Routine electrical safety testing in production |
| UNE-EN 62109-1:2011 | Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements |
| IEC 62282-6-300:2012 | Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability |
| 11/30244692 DC : 0 | BS EN 61347-2-13 - LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
| UNE-EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015) |
| UNE-EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| BS EN 14637:2007 | Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance |
| IEC 62056-7-5:2016 | Electricity metering data exchange - The DLMS/COSEM suite - Part 7-5: Local data transmission profiles for Local Networks (LN) |
| IEC 60601-2-66:2015 | Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems |
| UNE-EN 61347-2-13:2015 | Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
| IEC 62282-5-1:2012 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| IEC 61810-1:2015 | Electromechanical elementary relays - Part 1: General and safety requirements |
| IEC 62149-7:2012 | Fibre optic active components and devices - Performance standards - Part 7: 1 310-nm discrete vertical cavity surface emitting laser devices |
| EN 62149-3:2014 | Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems |
| EN 62149-5:2011 | Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs |
| UNE-EN 61010-1:2011 | Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements |
| UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
| EN 41003:2008 | Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system |
| ISA 61010-1 : 2008 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| UNE-EN ISO 17409:2017 | Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements (ISO 17409:2015, Corrected version 2015-12-15) |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| EN 60601-1-12:2015 | Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
| CSA ISO/IEC 14165-116 : 2006 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC) |
| EN 81-40:2008 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
| CSA ISO/IEC 14165-116 : 2006 : INC : AMD 1 : 2010 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC) |
| CSA ISO/IEC 14165-116 : 2006 : INC : AMD 1 : 2010 : R2016 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC) |
| EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| EN 15095:2007+A1:2008 | Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements |
| UNI EN 13617-1 : 2012 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| EN 50468:2009 | Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports |
| UNI EN 15095 : 2009 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| EN 60839-11-1:2013/AC:2015 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013) |
| EN 300 132-2 : 2.4.6 | ENVIRONMENTAL ENGINEERING (EE); POWER SUPPLY INTERFACE AT THE INPUT TO TELECOMMUNICATIONS AND DATACOM (ICT) EQUIPMENT; PART 2: OPERATED BY -48 V DIRECT CURRENT (DC) |
| UNI EN ISO 16201 : 2007 | TECHNICAL AIDS FOR DISABLED PERSONS - ENVIRONMENTAL CONTROL SYSTEMS FOR DAILY LIVING |
| EN 50116:2006 | Information technology equipment - Routine electrical safety testing in production |
| UNI EN 1010-2 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| UNI EN 14604 : 2005 | SMOKE ALARM DEVICES |
| UNI EN 12182 : 2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| UNI EN 14678-1 : 2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| EN 50132-1 : 2010 COR 2010 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS |
| CSA E60974.1 : 2012 | ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES |
| CEI EN 61587-4 : 2013 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 4: COMBINATION OF PERFORMANCE LEVELS FOR MODULAR CABINETS |
| 07/30164493 DC : 0 | BS EN 14637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATIONS AND MAINTENANCE |
| BS EN 50098-1:1999 | Customer premises cabling for information technology ISDN basic access |
| ANSI/AAMI HA60601-1-11:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| 13/30271473 DC : 0 | BS EN 80601-2-58 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-58: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF LENS REMOVAL DEVICES AND VITRECTOMY DEVICES FOR OPHTHALMIC SURGERY |
| EN 60598-1:2015/A1:2018 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| I.S. EN 60896-21:2004 | STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST |
| 09/30207352 DC : 0 | BS EN 62149-4 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 4: 1300 NM FIBRE OPTIC TRANSCEIVERS FOR GIGABIT ETHERNET APPLICATION |
| BS EN ISO 80601-2-72:2015 | Medical electrical equipment Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| BS EN 60598-1:2015 | Luminaires General requirements and tests |
| IEC 61587-1:2016 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation |
| 13/30250915 DC : 0 | BS EN 62353 - MEDICAL ELECTRICAL EQUIPMENT - RECURRENT TEST AND TEST AFTER REPAIR OF MEDICAL ELECTRICAL EQUIPMENT |
| EN 62680-1-2:2017 | Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification |
| NF EN 60601-2-66 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-66: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEARING INSTRUMENTS AND HEARING INSTRUMENT SYSTEMS |
| UNE-EN 62282-3-1:2011 | Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
| I.S. EN 50332-1:2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 1: GENERAL METHOD FOR ONE PACKAGE EQUIPMENT |
| IEC 60728-11:2016 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| I.S. EN 62274:2005 | MEDICAL ELECTRICAL EQUIPMENT - SAFETY OF RADIOTHERAPY RECORD AND VERIFY SYSTEMS |
| 14/30312710 DC : 0 | BS EN 62911 ED. 1.0 - AUDIO, VIDEO AND INFORMATION TECHNOLOGY EQUIPMENT - ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION |
| PREN 17076 : DRAFT 2017 | ANTI-COLLISION DEVICES AND SYSTEMS FOR TOWER CRANE - SAFETY CHARACTERISTICS AND REQUIREMENTS |
| UNI EN 15437-1 : 2009 | RAILWAY APPLICATIONS - AXLEBOX CONDITION MONITORING - INTERFACE AND DESIGN REQUIREMENTS - PART 1: TRACK SIDE EQUIPMENT AND ROLLING STOCK AXLEBOX |
| 13/30264413 DC : 0 | BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| DD IEC/PAS 62282-6-150:2011 | Fuel cell technologies Micro fuel cell power systems. Safety. Water reactive (UN Division 4.3) compounds in indirect PEM fuel cells |
| CEI EN 62471-5 : 2016 | PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 5: IMAGE PROJECTORS |
| BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
| DD CLC/TS 50131-4:2006 | Alarm systems. Intrusion and hold-up systems Warning devices |
| IEEE 1909.1-2014 | IEEE Recommended Practice for Smart Grid Communications Equipment -- Test Methods and Installation Requirements |
| BS EN 50491-4-1:2012 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| 12/30245174 DC : 0 | BS EN 60601-1-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT |
| 13/30277857 DC : 0 | BS EN 62149-9 ED 1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 9: SEEDED REFLECTIVE SEMICONDUCTOR OPTICAL AMPLIFIER TRANSCEIVERS |
| 13/30288591 DC : 0 | BS EN 60974-1 - ARC WEDLING EQUIPMENT - PART 1: WELDING POWER SOURCE |
| UNE-EN 81-41:2011 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| I.S. EN 61010-1:2010/A1:2019 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| DIN EN 81-41:2016-06 (Draft) | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| EN 50556:2011 | Road traffic signal systems |
| 13/30277845 DC : 0 | BS EN 62149-8 ED 1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARD - PART 8: SEEDED REFLECTIVE SEMICONDUCTOR OPTICAL AMPLIFIER DEVICES |
| I.S. EN 15437-1:2009 | RAILWAY APPLICATIONS - AXLEBOX CONDITION MONITORING - INTERFACE AND DESIGN REQUIREMENTS - PART 1: TRACK SIDE EQUIPMENT AND ROLLING STOCK AXLEBOX |
| PD IEC/TS 62700:2014 | DC power supply for notebook computers |
| I.S. EN 62820-1-1:2016 | BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
| CEI EN 62041 : 2012 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS |
| ISO/IEC TS 29125:2017 | Information technology — Telecommunications cabling requirements for remote powering of terminal equipment |
| BS EN 62274:2005 | Medical electrical equipment. Safety of radiotherapy record and verify systems |
| GS NFV-EVE 007 : 3.1.2 | NETWORK FUNCTIONS VIRTUALISATION (NFV) RELEASE 3; NFV EVOLUTION AND ECOSYSTEM; HARDWARE INTEROPERABILITY REQUIREMENTS SPECIFICATION |
| 10/30234538 DC : 0 | BS EN 60598-2-12 - LUMINAIRES - PART 2-12: PARTICULAR REQUIREMENTS - MAINS SOCKET-OUTLET MOUNTED NIGHTLIGHTS |
| NF EN 62684 : 2011 | INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES |
| UNE-EN 60065:2015 | Audio, video and similar electronic apparatus - Safety requirements |
| BS EN 50557:2011 | Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
| ISO 6469-3:2011 | Electrically propelled road vehicles Safety specifications Part 3: Protection of persons against electric shock |
| 15/30328943 DC : 0 | BS EN 63024 ED1.0 - REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARD[S]) FOR CIRCUIT BREAKERS- RCBO[S],RCCB[S] FOR HOUSEHOLD AND SIMILAR USES |
| CEI EN 61347-1 : 2016 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| BS EN 60839-11-1:2013 | Alarm and electronic security systems Electronic access control systems. System and components requirements |
| CEI EN 60598-2-12 : 2014 | LUMINAIRES - PART 2-12: PARTICULAR REQUIREMENTS - MAINS SOCKET-OUTLET MOUNTED NIGHTLIGHTS |
| ISO/IEC 22050:2002 | Information technology Data interchange on 12,7 mm, 384-track magnetic tape cartridges Ultrium-1 format |
| BS EN ISO 17409:2017 | Electrically propelled road vehicles. Connection to an external electric power supply. Safety requirements |
| BS EN 62684:2010 | Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones |
| BS EN 62041:2010 | Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements |
| BS EN 60950-21:2003 | Information technology equipment. Safety Remote power feeding |
| CSA ISO/IEC 20162:2004 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 300 MM OPTICAL DISK CARTRIDGES OF TYPE WORM (WRITE ONCE READ MANY) USING IRREVERSIBLE EFFECTS - CAPACITY: 30 GBYTES PER CARTRIDGE |
| BS EN 62911:2016 | Audio, video and information technology equipment. Routine electrical safety testing in production |
| 12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| BS EN 62149-3:2014 | Fibre optic active components and devices. Performance standards Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems |
| I.S. EN 50090-2-3:2005 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| EN IEC 61204-7:2018 | Low-voltage switch mode power supplies - Part 7: Safety requirements |
| CEI EN 62083 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS |
| UNE-EN 60598-2-12:2013 | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights |
| 07/30174053 DC : 0 | BS EN 41003 - PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO TELECOMMUNICATION NETWORKS AND/OR A CABLE DISTRIBUTION SYSTEM |
| DIN EN 12966:2015-03 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| CSA B651.2 : 2007 | ACCESSIBLE DESIGN FOR SELF-SERVICE INTERACTIVE DEVICES |
| I.S. EN 62040-1-1:2004 | |
| BS EN 50332-2:2013 | Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design |
| CAN/CSA-ISO/IEC 20162-04 (R2012) | Information Technology - Data Interchange on 300 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity: 30 Gbytes per Cartridge (Adopted ISO/IEC 20162:2001, first edition, 2001-12-01) |
| CAN/CSA-ISO/IEC 16449-04 (R2012) | Information Technology - 80 mm DVD - Read-Only Disk (Adopted ISO/IEC 16449:2002, second edition, 2002-04-15) |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| BS EN 60950-22:2017 | Information technology equipment. Safety Equipment to be installed outdoors |
| CSA C22.2 No. 61010.1 : 2012 : FR | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| CSA B651.2 : 2007 : R2012 | ACCESSIBLE DESIGN FOR SELF-SERVICE INTERACTIVE DEVICES |
| ANSI INCITS 364 : 2003 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - 10 GIGABIT (10GFC) |
| NF EN 60950-23 : 2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT |
| CSA ISO/IEC 18012-1 : 2005 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM - GUIDELINES FOR PRODUCT INTEROPERABILITY - PART 1: INTRODUCTION |
| I.S. EN 50468:2009 | RESISTIBILITY REQUIREMENTS TO OVERVOLTAGES AND OVERCURRENTS DUE TO LIGHTNING FOR EQUIPMENT HAVING TELECOMMUNICATION PORTS |
| INCITS/ISO/IEC 20062 : 2001 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - VXA-1 FORMAT |
| DIN EN 15437-1:2010-06 | Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox |
| IEC 61643-11:2011 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
| BS EN 61810-1:2015 | Electromechanical elementary relays General and safety requirements |
| PD IEC/TS 60695-1-14:2017 | Fire hazard testing Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products |
| BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| PD IEC/TR 60601-4-3:2015 | Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements |
| CEI EN 61643-11 : 2014 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
| INCITS/ISO/IEC 16448 : 2002 | INFORMATION TECHNOLOGY - 120 MM DVD - READ-ONLY DISK |
| UNE-EN 15437-1:2010 | Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox |
| ISO 12643-2:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems |
| I.S. EN 60065:2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| I.S. EN 50116:2006 | INFORMATION TECHNOLOGY EQUIPMENT - ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION |
| EN 63024:2018 | Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| I.S. EN 62911:2016 | AUDIO, VIDEO AND INFORMATION TECHNOLOGY EQUIPMENT - ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION |
| EN 62488-2:2017 | Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC |
| EN 50174-3:2013/A1:2017 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| I.S. CLC/TR 62102:2006 | ELECTRICAL SAFETY - CLASSIFICATION OF INTERFACES FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATIONS TECHNOLOGY NETWORKS |
| I.S. EN 62018:2003 | POWER CONSUMPTION OF INFORMATION TECHNOLOGY EQUIPMENT - MEASUREMENT METHODS |
| NF EN 50468 : 2009 | RESISTIBILITY REQUIREMENTS TO OVERVOLTAGES AND OVERCURRENTS DUE TO LIGHTNING FOR EQUIPMENT HAVING TELECOMMUNICATION PORTS |
| IEEE C62.42.0-2016 | IEEE Guide for the Application of Surge-Protective Components in Surge-Protective Devices and Equipment Ports--Overview |
| I.S. EN 62310-3:2008 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS |
| I.S. EN ISO 80601-2-72:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015) |
| I.S. EN 60695-1-10:2017 | FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES |
| I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| I.S. CLC TS 50131-4:2006 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| I.S. EN 61587-1:2017 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION |
| ISO 7240-4:2017 | Fire detection and alarm systems — Part 4: Power supply equipment |
| IEC TR 61131-4:2004 | Programmable controllers - Part 4: User guidelines |
| I.S. EN 60598-2-12:2013 | LUMINAIRES - PART 2-12: PARTICULAR REQUIREMENTS - MAINS SOCKET-OUTLET MOUNTED NIGHTLIGHTS (IEC 60598-2-12:2013 (EQV)) |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| IEC TR 63167:2018 | Assessment of contact current related to human exposure to electric, magnetic and electromagnetic fields |
| IEEE 802.3-2012 | IEEE Standard for Ethernet |
| IEC GUIDE 112:2017 | Guide on the safety of multimedia equipment |
| I.S. EN 62684:2010 | INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES |
| CAN/CSA-C22.2 NO. 60896-22:17 | Stationary lead-acid batteries — Part 22: Valve regulated types - Requirements (Adopted IEC 60896-22:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb - Partie 22 : Types étanches à soupapes - Exigences (norme IEC 60896-22:2004 adoptée, première édition, 2004-02, avec exigences propres au Canada) |
| EN IEC 62820-2:2018 | Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS) |
| I.S. EN 60204-33:2011 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT |
| I.S. EN 61204-7:2006 | LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 7: SAFETY REQUIREMENTS |
| PD IEC/TR 62809:2013 | Summary of requirements and tests for products in the scope of IEC 60601-2-66 |
| UNE-EN 12966:2015 | Road vertical signs - Variable message traffic signs |
| CEI EN 50556 : 2012 | ROAD TRAFFIC SIGNAL SYSTEMS |
| I.S. EN 61010-1:2010 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 60598-1:2015 | Luminaires - Part 1: General requirements and tests |
| ISO/IEC 22092:2002 | Information technology Data interchange on 130 mm magneto-optical disk cartridges Capacity: 9,1 Gbytes per cartridge |
| IEC 62041:2017 | Transformers, power supplies, reactors and similar products - EMC requirements |
| EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
| IEC 62820-2:2017 | Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS) |
| I.S. HD 60364-4-444:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES |
| I.S. EN 61131-2:2007 | PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
| ISO/IEC 15045-2:2012 | Information technology Home Electronic System (HES) gateway Part 2: Modularity and protocol |
| I.S. EN 62075:2012 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV)) |
| IEC 60364-4-44:2007+AMD1:2015+AMD2:2018 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| IEC TR 62102:2005 | Electrical safety - Classification of interfaces for equipment to be connected to information and communications technology networks |
| IEEE 1823-2015 | IEEE Standard for Universal Power Adapter for Mobile Devices |
| DIN EN ISO 16201:2006-12 | Technical aids for persons with disability - Environmental control systems for daily living (ISO 16201:2006) |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| IEC 62052-31:2015 | Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests |
| BS EN 61558-2-16 : 2009 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS |
| 14/30302919 DC : 0 | PD CEN/TR 81-12 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - BASICS AND INTERPRETATIONS - PART 12: USE OF EN 81-20 AND EN 81-50 IN SPECIFIC MARKETS |
| IEC 60950-23:2005 | Information technology equipment - Safety - Part 23: Large data storage equipment |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| BS ISO 18246 : 2015 | ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY |
| BS EN 61347-2-13 : 2014 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES (IEC 61347-2-13:2014) |
| BS EN 61918:2013 | Industrial communication networks. Installation of communication networks in industrial premises |
| IEC 62274:2005 | Medical electrical equipment - Safety of radiotherapy record and verify systems |
| IEC 62310-3:2008 | Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements |
| IEC 60896-22:2004 | Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
| IEC TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children |
| IEC 62040-1-1:2002 | Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas |
| 15/30297990 DC : 0 | BS EN 62840-2 ED 1.0 - ELECTRIC VEHICLE BATTERY SWAP SYSTEM - PART 2: SAFETY REQUIREMENTS |
| IEC 62477-1:2012+AMD1:2016 CSV | Safety requirements for power electronic converter systems and equipment - Part 1: General |
| IEC 61347-2-13:2014+AMD1:2016 CSV | Lamp controlgear - Part 2-13: Particular requirements for d.c. ora.c. supplied electronic controlgear for LED modules |
| UNE-EN 60839-11-2:2015 | Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines |
| BS EN 61851-1:2011 | Electric vehicle conductive charging system General requirements |
| UNE-EN 60839-11-1:2014 | Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements |
| IEC 80601-2-58:2014+AMD1:2016 CSV | Medical electrical equipment - Part 2-58: Particular requirementsfor the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| BS EN 13617-1:2012 | Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| UNE-EN 61851-23:2015 | Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station |
| ISO 80601-2-72:2015 | Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| BS EN 50491-3:2009 | General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) Electrical safety requirements |
| BS EN 62109-1:2010 | Safety of power converters for use in photovoltaic power systems General requirements |
| IEC 62040-5-3:2016 | Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements |
| IEC 62149-5:2009 | Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| 14/30315309 DC : 0 | BS EN 61204-3 - LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC) |
| IEC 60384-14:2013+AMD1:2016 CSV | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
| IEC 60839-11-2:2014 | Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines |
| IEC 62345:2005 | ID format for 50 mm magneto-optical disc system |
| IEC 62282-6-100:2010+AMD1:2012 CSV | Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety |
| UNE-EN 62282-5-1:2013 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| UNE-EN 50491-3:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements |
| 07/30164449 DC : 0 | EN 61347-1 AMD1 - LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| IEC 60950-22:2016 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
| IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| IEC 62149-9:2014 | Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers |
| IEC 62075:2012 | Audio/video, information and communication technology equipment - Environmentally conscious design |
| UNE-EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| IEC 62040-1-2:2002 | Uninterruptible power systems (UPS) - Part 1-2: General and safety requirements for UPS used in restricted access locations |
| IEC 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
| IEC 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
| IEC 60598-2-12:2013 | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights |
| IEC 62149-2:2014 | Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices |
| ISO 18246:2015 | Electrically propelled mopeds and motorcycles — Safety requirements for conductive connection to an external electric power supply |
| IEC 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| 10/30173705 DC : DRAFT SEP 2010 | BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY |
| 11/30233799 DC : 0 | BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS |
| 04/30089617 DC : DRAFT MARCH 2004 | |
| IEC 60940:2015 | Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression |
| IEC TR 62368-2:2015 | Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1 |
| IEC 62149-4:2010 | Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application |
| IEC 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
| UNE-EN 62083:2010 | Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems |
| BS EN 60204-33:2011 | Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment |
| 15/30269927 DC : 0 | BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS |
| BS EN 61204-7:2006 | Live working. Conductive clothing Safety requirements |
| BS EN 50310:2016 | Telecommunications bonding networks for buildings and other structures |
| 12/30248102 DC : 0 | BS EN 14604 - SMOKE ALARM DEVICES |
| ISO 16201:2006 | Technical aids for persons with disability — Environmental control systems for daily living |
| 12/30266672 DC : 0 | BS EN 60598-1 ED 8.0 - LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| IEC 62083:2009 | Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems |
| 16/30242287 DC : 0 | BS EN 62688 - CONCENTRATOR PHOTOVOLTAIC (CPV) MODULE AND ASSEMBLY SAFETY QUALIFICATION |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| BS EN 62282-2:2012 | Fuel cell technologies Fuel cell modules |
| IEC 62018:2003 | Power consumption of information technology equipment - Measurement methods |
| BS ISO/IEC 30129 : 2015 | INFORMATION TECHNOLOGY - TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES |
| BS EN 12182:2012 | Assistive products for persons with disability. General requirements and test methods |
| 04/30106146 DC : DRAFT MARCH 2004 | BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| UNE-EN 13160-1:2017 | Leak detection systems - Part 1: General Principles |
| DIN EN 15095:2009-06 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| UNE-EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| IEC 61587-4:2012 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of performance levels for modular cabinets |
| EN 62911:2016 | Audio, video and information technology equipment - Routine electrical safety testing in production |
| EN 62310-3:2008 | Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements |
| EN 62109-1 : 2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| EN ISO 80601-2-72:2015 | Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) |
| EN ISO 16201:2006 | Technical aids for disabled persons - Environmental control systems for daily living (ISO 16201:2006) |
| EN 15437-1:2009 | Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox |
| EN 14637:2007 | Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance |
| EN 54-27:2015 | Fire detection and fire alarms systems - Part 27: Duct smoke detectors |
| EN 14154-4:2014 | Water meters - Part 4: Additional functionalities |
| EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015) |
| UNE-EN 60695-1-10:2017 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| UNE-EN 62075:2013 | Audio/video, information and communication technology equipment - Environmentally conscious design |
| ECMA/TR 97 : 1ED 2009 | GUIDE FOR ASSESSMENT OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM MULTIMEDIA PRODUCTS IN ACCORDANCE WITH IEC/EN 62311 |
| DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
| IEEE 1725-2011 | IEEE Standard for Rechargeable Batteries for Cellular Telephones |
| BS EN 50556:2011 | Road traffic signal systems |
| CEI EN 60974-1 : 2013 | ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES |
| PD IEC/TR 63054:2017 | Low-voltage switchgear and controlgear. Fire risk analysis and risk reduction measures |
| EN 61587-1:2017 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation |
| 11/30256742 DC : 0 | BS EN 62282-6-300 - FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY |
| CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| INCITS/ISO/IEC 22092 : 2002 : R2007 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 130 MM MAGNETO-OPTICAL DISK CARTRIDGES - CAPACITY: 9,1 GBYTES PER CARTRIDGE |
| 12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| BS EN 62083:2009 | Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems |
| ISO/IEC 30191:2015 | Information technology Digitally recorded media for information interchange and storage 120 mm Triple Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided disk) and Quadruple Layer (128,0 Gbytes single sided disk) BD Recordable disk |
| PREN 50132-5-3 : DRAFT 2010 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION |
| 10/30218198 DC : 0 | BS EN 50132-5-3:2010 - ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION |
| BS EN 60728-3:2011 | Cable networks for television signals, sound signals and interactive services Active wideband equipment for cable networks |
| CLC/TR 50656:2016 | SPD application in conjunction with Class II equipment |
| ISO/IEC 30129:2015 | Information technology Telecommunications bonding networks for buildings and other structures |
| CSA ISO/IEC 14762 : 2010 | INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) |
| BS EN 62056-7-5:2016 | Electricity metering data exchange. The DLMS/COSEM suite Local data transmission profiles for Local Networks (LN) |
| UNE-EN 14154-4:2015 | Water meters - Part 4: Additional functionalities |
| CEI EN 62949 : 1ED 2017 | PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATION NETWORKS |
| CEI EN 60384-14 : 2014 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS |
| 08/30188489 DC : DRAFT AUG 2008 | BS EN 54-27 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 27: DUCT SMOKE DETECTORS |
| BS EN 60598-2-12:2013 | Luminaires Particular requirements. Mains socket-outlet mounted nightlights |
| CEI EN 62820-1-1 : 1ED 2017 | BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
| IEC TR 62348:2012 | Assessment of the impact of the most significant changes in Amendment 1 to IEC 60601-1:2005 and mapping of the clauses of IEC 60601-1:2005 to the previous edition |
| I.S. EN 62149-2:2014 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 2: 850 NM DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER DEVICES |
| I.S. EN 60950-22:2017 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| 10/30219087 DC : 0 | BS EN 61587-1 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 1: ENVIRONMENTAL REQUIREMENTS AND TESTS, SAFETY ASPECTS FOR FOR CABINETS, RACKS, SUBRACKS AND CHASSIS |
| 10/30238615 DC : DRAFT NOV 2010 | BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| I.S. EN 50556:2011 | ROAD TRAFFIC SIGNAL SYSTEMS |
| BS EN 62040-1-1:2003 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas |
| 04/30123989 DC : DRAFT OCT 2004 | IEC 61643-11 - SURGE PROTECTION DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - PART 11: PERFORMANCE REQUIREMENTS AND TESTING METHODS |
| 09/30155521 DC : 0 | BS EN 60601-1-11 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| DIN EN 54-27:2015-05 | Fire detection and fire alarm systems - Part 27: Duct smoke detectors |
| 16/30339195 DC | BS EN 81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intended for use by persons with impaired mobility |
| 09/30182299 DC : 0 | BS EN 1010-2:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| I.S. EN 50486:2008 | EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS |
| 15/30287154 DC : 0 | BS EN 60601-2-40 ED 2.0 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-40: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ELECTROMYOGRAPHS AND EVOKED RESPONSE EQUIPMENT - PROPOSED HORIZONTAL STANDARD |
| 16/30332632 DC : 0 | BS EN 62932-1 ED 1.0 - FLOW BATTERY SYSTEMS FOR STATIONARY APPLICATIONS - PART 1: GENERAL ASPECTS, TERMINOLOGY AND DEFINITIONS |
| BS EN 54-27:2015 | Fire detection and fire alarms systems Duct smoke detectors |
| 08/30186475 DC : 0 | BS EN 13617-1 AMD1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| BS 7987(2001) : 2001 | ROAD TRAFFIC SIGNAL SYSTEMS |
| BS EN 61643-11 : 2012 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
| BS EN 60950-23:2006 | Information technology equipment. Safety Large data storage equipment |
| BS EN 50132-5-3:2012 | Alarm systems. CCTV surveillance systems for use in security applications Video transmission. Analogue and digital video transmission |
| BS EN 60839-11-2:2015 | Alarm and electronic security systems Electronic access control systems. Application guidelines |
| XP CLC/TS 50131-3 : 2005 XP | ALARM SYSTEMS - INTRUSION SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT |
| CSA E61131.2 :2006 | PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
| BS EN 60896-22:2004 | Stationary lead-acid batteries Valve regulated types. Requirements |
| I.S. EN 62477-1:2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL |
| BS EN 62018:2003 | Power consumption of information technology equipment. Measurement methods |
| PD CLC/TR 62102:2006 | Electrical safety. Classification of interfaces for equipment to be connected to information and communications technology networks |
| CSA ISO/IEC 16448:2004 | INFORMATION TECHNOLOGY - 120 MM DVD - READ-ONLY DISK |
| CSA E61131.2 : 2006 : R2016 | PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
| UNE-EN 50131-4:2010 | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
| I.S. EN 60940:2015 | GUIDANCE INFORMATION ON THE APPLICATION OF CAPACITORS, RESISTORS, INDUCTORS AND COMPLETE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION |
| NF EN 62040-1 : 2009 AMD 1 2013 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS |
| IEC 60669-2-5:2013 | Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) |
| EN 50131-1:2006/A2:2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS |
| CEI EN 62075 : 2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
| IEC GUIDE 110:2014 | Home control systems - Guidelines relating to safety |
| CAN/CSA-ISO/IEC 22050-04 (R2012) | Information Technology - Data Interchange on 12,7 mm, 384-Track Magnetic Tape Cartridges - Ultrium-1 Format (Adopted ISO/IEC 22050:2002, first edition, 2002-10-01) |
| I.S. EN 60601-1-11:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| UNE-EN 62684:2011 | Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones |
| CSA C22.2 No. 80601-2-55 : 2014(R2019) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| I.S. EN 60598-1:2015 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| CEI EN 60728-11 : 2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
| EN IEC 62688:2018 | Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification |
| UNE-EN 50131-1:2008 | Alarm systems - Intrusion and hold-up systems -- Part 1: System requirements |
| CEI EN 62149-5 : 2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
| I.S. EN 50491-3:2009 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS |
| I.S. EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV)) |
| EN 60601-1-11:2015 | Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN IEC 62684:2018 | INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES |
| I.S. EN 62149-8:2014 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 8: SEEDED REFLECTIVE SEMICONDUCTOR OPTICAL AMPLIFIER DEVICES |
| I.S. EN 50332-2:2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY, OR ARE OFFERED AS ONE PACKAGE EQUIPMENT BUT WITH STANDARDISED CONNECTORS BETWEEN THE TWO ALLOWING TO COMBINE COMPONENTS OF DIFFERENT MANUFACTURERS |
| I.S. EN ISO 80601-2-55:2018 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS (ISO 80601-2-55:2018) |
| UNE-EN 62282-6-300:2013 | Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability |
| S.R. HD 60364-4-443:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-44: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES - CLAUSE 443: PROTECTION AGAINST TRANSIENT OVERVOLTAGES OF ATMOSPHERIC ORIGIN OR DUE TO SWITCHING |
| IEEE 1680.2-2012 | IEEE Standard for Environmental Assessment of Imaging Equipment |
| I.S. EN IEC 61730-2:2018 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING |
| I.S. EN 60990:2016 | METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT |
| CEI EN 62310-3 : 2010 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS |
| CEI EN 50491-4-1 : 2014 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) |
| CEI 62-143 : 2007 | MAPPING BETWEEN THE CLAUSES OF THE THIRD EDITION OF IEC 60601-1 AND THE 1988 EDITION AS AMENDED |
| CEI EN 62676-1-1 : 2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
| I.S. EN 60839-11-2:2015 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-2: ELECTRONIC ACCESS CONTROL SYSTEMS - APPLICATION GUIDELINES |
| I.S. EN 50514:2014 | AUDIO, VIDEO AND INFORMATION TECHNOLOGY EQUIPMENT - ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION |
| I.S. EN 62052-31:2016 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS |
| I.S. EN 62149-9:2014 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 9: SEEDED REFLECTIVE SEMICONDUCTOR OPTICAL AMPLIFIER TRANSCEIVERS |
| I.S. EN 54-27:2015 | FIRE DETECTION AND FIRE ALARMS SYSTEMS - PART 27: DUCT SMOKE DETECTORS |
| I.S. EN IEC 62688:2018 | CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION |
| BS EN 60990:2000 | Methods of measurement of touch current and protective conductor current |
| BS EN 50131-4:2009 | Alarm systems. Intrusion and hold-up systems Warning devices |
| ISO 80601-2-55:2018 | Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors |
| UNE-EN 60974-1:2013 | Arc welding equipment - Part 1: Welding power sources |
| UNE-EN 62041:2011 | Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements |
| I.S. EN 61347-2-13:2014 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
| NF EN 60065 : 2015 AMD 11 2018 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| 17/30348010 DC : 0 | BS EN 17076 - ANTI-COLLISION DEVICES AND SYSTEMS FOR TOWER CRANE - SAFETY CHARACTERISTICS AND REQUIREMENTS |
| UNI EN 14154-4 : 2015 | WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES |
| UNE-EN 50491-4-1:2013 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| CEI EN 63002 : 1ED 2017 | IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES |
| EN IEC 62684:2018 | Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones |
| ISO/IEC/IEEE 8802-3:2017 | Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Standard for Ethernet |
| S.R. CLC/TR 50656:2016 | SPD APPLICATION IN CONJUNCTION WITH CLASS 2 EQUIPMENT |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| ISO/IEC 14165-116:2005 | Information technology Fibre Channel Part 116: 10 Gigabit (10GFC) |
| I.S. EN 80601-2-58:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-58: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF LENS REMOVAL DEVICES AND VITRECTOMY DEVICES FOR OPHTHALMIC SURGERY |
| IEC 63024:2017 | Requirements for automatic reclosing devices (ARDs) for circuit breakers, RCBOs-RCCBs for household and similar uses |
| IEC TR 62809:2013 | Summary of requirements and tests to products in the scope of IEC 60601-2-66 |
| I.S. EN 60896-22:2004 | STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS |
| EN 62477-1:2012/A1:2017 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016) |
| EN 81-50:2014 | Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components |
| EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
| EN 62282-6-100:2010/A1:2012 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010/A1:2012) |
| EN 62040-1:2008/A1:2013 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008/A1:2013) |
| ISO 17409:2015 | Electrically propelled road vehicles Connection to an external electric power supply Safety requirements |
| DIN EN 14678-1:2013-06 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| DIN EN 12405-1:2011-04 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| 07/30091745 DC : 0 | BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS |
| IEC 62676-1-1:2013 | Video surveillance systems for use in security applications - Part 1-1: System requirements - General |
| IEC 62820-1-1:2016 | Building intercom systems - Part 1-1: System requirements - General |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| EN 60601-2-66:2015 | Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems |
| BS EN IEC 61204-7:2018 | Low-voltage switch mode power supplies Safety requirements |
| EN ISO 17409:2017 | Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements (ISO 17409:2015, Corrected version 2015-12-15) |
| BS EN 14678-1:2013 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers |
| 11/30258071 DC : 0 | BS EN 61918 - INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
| IEC 62109-1:2010 | Safety of power converters for use in photovoltaic power systems - Part 1: General requirements |
| PD IEC/TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children |
| 09/30205182 DC : 0 | BS EN 50310 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT |
| BS EN 14604:2005 | Smoke alarm devices |
| 16/30354067 DC : 0 | BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY |
| IEC 62310-1:2005 | Static transfer systems (STS) - Part 1: General and safety requirements |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| BS EN 60825-2 : 2004 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| IEC 61558-2-16:2009+AMD1:2013 CSV | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units |
| 11/30203695 DC : 0 | BS EN 60669-2-5 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-5: SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) |
| IEC 62282-3-1:2007 | Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
| PD IEC/TR 62354:2014 | General testing procedures for medical electrical equipment |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| IEC 62149-8:2014 | Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical amplifier devices |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| 05/30133440 DC : DRAFT MAY 2005 | EN 50310 ED 2 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT |
| EN 62274:2005 | Medical electrical equipment - Safety of radiotherapy record and verify systems |
| EN 61851-23:2014/AC:2016-06 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION (IEC 61851-23:2014/COR1:2016) |
| EN 12966:2014 | Road vertical signs - Variable message traffic signs |
| EN 60940:2015 | Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression |
| EN 62075:2012/AC:2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012) |
| IEC 60990:2016 RLV | Methods of measurement of touch current and protective conductor current |
| EN 62018:2003 | Power consumption of information technology equipment - Measurement methods |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| HD 60364-4-443:2016 | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching |
| EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012) |
| DIN EN 81-50:2015-02 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS |
| EN 62083:2009 | MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS |
| EN 62056-7-5:2016 | Electricity metering data exchange - The DLMS/COSEM suite - Part 7-5: Local data transmission profiles for Local Networks (LN) |
| EN 62149-4:2010 | Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application |
| EN 62041:2010 | Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements |
| DIN EN 14637:2008-01 | Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance |
| DIN EN 81-41:2011-09 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| EN 50491-3:2009 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements |
| EN 62040-1-1:2003/corrigendum:2004 | |
| EN 12405-3:2015 | Gas meters - Conversion devices - Part 3: Flow computer |
| EN 62149-2:2014 | Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices |
| EN 62310-1:2005 | Static transfer systems (STS) - Part 1: General and safety requirements |
| EN 62282-6-300:2013 | Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability |
| EN 60204-33:2011 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| HD 60364-4-444:2010/AC:2012 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES |
| EN 50491-4-1:2012 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| EN 50557:2011 | Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
| EN 60950-21:2003 | Information technology equipment - Safety - Part 21: Remote power feeding |
| EN 50486:2008 | Equipment for use in audio and video door-entry systems |
| EN 60974-1:2012 | Arc welding equipment - Part 1: Welding power sources |
| CLC/TS 50131-4:2006 | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
| EN 50332-1:2013 | Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment" |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| EN 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
| IEC 61730-2:2016 RLV | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| EN 62149-9:2014 | Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers |
| EN 50131-4:2009 | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
| EN 50090-2-3:2005 | Home and Building Electronic Systems (HBES) - Part 2-3: System overview - General functional safety requirements for products intended to be integrated in HBES |
| EN 62471-5:2015 | Photobiological safety of lamps and lamp systems - Part 5: Image projectors |
| IEC 60950-22:2016 RLV | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
| HD 60364-4-442:2012 | Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system |
| CSA E60598.1 : 2016 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| UNE-EN 81-50:2017 | Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components |
| CSA E60384.14 : 2014 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS |
| IEC 60695-11-20:2015 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC TR 60825-9:1999 | Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| IEC 60695-11-4:2011 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
| IEC 60728-11:2016 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| IEC 61643-321:2001 | Components for low-voltage surge protective devices - Part 321: Specifications for avalanche breakdown diode (ABD) |
| IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| IEC 60998-1:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements |
| IEC 60664-4:2005 | Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
| IEC 60384-14:2013+AMD1:2016 CSV | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
| IEC GUIDE 112:2017 | Guide on the safety of multimedia equipment |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ISO 9773:1998 | Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source |
| IEC 60999-2:2003 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) |
| IEC 60050-212:2010 | International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases |
| IEC 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| IEC 60885-1:1987 | Electrical test methods for electric cables. Part 1: Electrical tests for cables, cords and wires for voltages up to and including 450/750 V |
| IEC 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
| IEC 60227-2:1997+AMD1:2003 CSV | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| CFR 47(PTS40-69) : OCT 2017 | TELECOMMUNICATIONS - FEDERAL COMMUNICATIONS COMMISSION |
| AS/NZS IEC 60839.11.1:2019 | Alarm and electronic security systems Electronic access control systems - System and components requirements |
| IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV | Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links |
| IEC 60269-2-1:2004 | Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses |
| IEC 61643-21:2000+AMD1:2008+AMD2:2012 CSV | Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods |
| IEC 60695-10-3:2016 | Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test |
| IEC 60851-6:2012 | Winding wires - Test methods - Part 6: Thermal properties |
| IEC 60851-5:2008+AMD1:2011 CSV | Winding wires - Test methods - Part 5: Electrical properties |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| IEC 61643-311:2013 | Components for low-voltage surge protective devices - Part 311: Performance requirements and test circuits for gas discharge tubes (GDT) |
| IEC 60227-1:2007 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| IEC 60908:1999 | Audio recording - Compact disc digital audio system |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| AS/NZS 62676.1.1:2020 | Video surveillance systems for use in security applications System requirements - General (IEC 62676-1-1:2013, MOD) |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| ECMA 267 : 3ED 2001 | 120 MM DVD - READ-ONLY DISK |
| IEC 60906-2:2011 | IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. and 20 A 125 V a.c. |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 9772:2012 | Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| IEC 61058-1:2016 | Switches for appliances - Part 1: General requirements |
| IEC 60896-22:2004 | Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| IEC 61051-2:1991 | Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors |
| IEC 60695-11-3:2012 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
| IEC 60906-1:2009 | IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c. |
| IEC 60851-3:2009+AMD1:2013 CSV | Winding wires - Test methods - Part 3: Mechanical properties |
| ISO 4892-4:2013 | Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps |
| IEC 62471:2006 | Photobiological safety of lamps and lamp systems |
| IEC TS 60695-11-3:2004 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| IEC 61965:2003 | Mechanical safety of cathode ray tubes |
| IEC 61643-331:2003 | Components for low-voltage surge protective devices - Part 331: Specification for metal oxide varistors (MOV) |
| IEC 60747-5-5:2007+AMD1:2013 CSV | Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers |
| IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| ISO 4046-4:2002 | Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| IEC 60317-43:1997+AMD1:2010 CSV | Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240 |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC TS 60695-11-4:2004 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| AS/NZS 3112:2017 | Approval and test specification - Plugs and socket-outlets |
| ISO 178:2010 | Plastics Determination of flexural properties |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.