IEC 61496-1:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
31-12-2021
Superseded by
Published date
05-04-2012
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Functional, design and environmental requirements
5 Testing
6 Marking for identification and for safe use
7 Accompanying documents
Annex A (normative) - Optional functions of the ESPE
Annex B (normative) - Catalogue of single faults affecting
the electrical equipment of the ESPE, to be
applied as specified in 5.3
Annex C (informative) - Conformity assessment
Bibliography
Index
IEC 61496-1:2012 specifies general requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety related system. Special attention is directed to functional and design requirements that ensure an appropriate safety-related performance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given in Annex A. This third edition cancels and replaces the second edition published in 2004 and its amendment 1 (2007). The main changes with respect to the previous edition are as follows: The design, test and verification requirements have been updated to make them consistent with the latest standards for functional safety and EMC. The contents of the corrigendum of April 2015 have been included in this copy.
| Committee |
TC 44
|
| DocumentType |
Standard
|
| Pages |
101
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| VDE 0113-201 Berichtigung 1:2015-08 | Identical |
| OVE/ONORM EN 61496-1 : 2014 AC 2015 | Identical |
| NF EN 61496-1 : 2014 | Identical |
| NBN EN 61496-1 : 2014 COR 2015 | Identical |
| NEN EN IEC 61496-1 : 2013 C1 2015 | Identical |
| UNE-EN 61496-1:2014 | Identical |
| PN EN 61496-1 : 2014 AC 1 2015 | Identical |
| SAC GB/T 19436-1 : 2013 | Identical |
| I.S. EN 61496-1:2013&AC:2015 | Identical |
| BS EN 61496-1:2013 | Identical |
| EN 61496-1:2013/AC:2015 | Identical |
| NF EN IEC 61496-1:2020 | Identical |
| VDE 0113-201 : 2014 COR 1 2015 | Identical |
| I.S. EN 61496-1:2013 | Identical |
| SN EN 61496-1 : 2004 CORR 2010 | Identical |
| I.S. EN ISO 10218-2:2011 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION |
| UNE-EN 60947-5-3:2014 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| CEI CLC/TS 62046 : 2011 | SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| BS EN 16564:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| CSA Z434 : 2014 | INDUSTRIAL ROBOTS AND ROBOT SYSTEMS |
| BS EN 60601-1-2:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests |
| DIN EN 15571:2015-03 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| IEC TS 61496-4-2:2014 | Safety of machinery - Electro-sensitive protective equipment - Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using reference pattern techniques (VBPDPP) |
| DIN EN 16252:2013-03 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| 17/30325421 DC : 0 | BS ISO 25119-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| DIN EN ISO 13856-1:2013-08 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013) |
| 09/30179854 DC : 0 | BS EN 13114:2002/A1 - TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| DIN EN 15162:2008-10 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
| I.S. EN ISO 12100-2:2003 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| DD CLC/TS 50418:2004 | Safety of machinery. Electro-sensitive protective equipment. Passive infra-red protective devices (PIPDs) |
| 12/30244749 DC : 0 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN ISO 13856-2:2013-08 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013) |
| PD CLC/TR 62685:2011 | Industrial communication networks. Profiles. Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs) |
| DIN EN ISO 16093:2014-03 (Draft) | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
| DD CEN/TS 13763-27:2003 | Explosives for civil uses. Detonators and relays Definitions, methods and requirements for electronic initiation systems |
| I.S. EN 691-1:2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 14886:2008 | Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements |
| 03/306044 DC : DRAFT APR 2003 | BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| I.S. TS 61496-3:2003 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 3: PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO DIFFUSE REFLECTION (AOPDDR) |
| CEI EN 61131-6 : 2013 | PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY |
| BS EN 16590-3:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Series development, hardware and software |
| BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
| 12/30253910 DC : DRAFT JULY 2012 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES |
| 12/30243081 DC : 0 | BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| 06/30155798 DC : DRAFT SEP 2006 | BS EN 62046 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| I.S. EN 1672-1:2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 12/30273148 DC : 0 | BS EN 15467 - FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 1870-3 : DRAFT 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| BS EN 60947-5-3:2013 | Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| 13/30280048 DC : 0 | BS EN 16590-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
| 11/30231451 DC : DRAFT SEP 2011 | BS EN ISO 13856-1 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS |
| BS EN 1570-1 : 2011 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS |
| DIN EN 16564:2015-04 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| 14/30258503 DC : 0 | BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| DIN EN 415-10:2014-07 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| CEI EN 60947-5-3 : 2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| DIN EN 13035-5:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking (includes Amendment A1:2009) |
| BS EN 16590-2:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase |
| 11/30237569 DC : 0 | BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| BS EN 16252:2012 | Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements |
| 09/30179845 DC : 0 | BS EN 13112:2002/A1 - TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY |
| DIN EN 15166:2010-02 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
| 05/30130855 DC : DRAFT MAR 2005 | IEC 61496-3 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 3: PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO (AOPDDR) |
| BS EN 15467:2014 | Food processing machinery. Fish heading and filleting machines. Safety and hygiene requirements |
| 12/30244743 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 09/30197984 DC : 0 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| DIN EN ISO 13855:2010-10 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| 13/30280041 DC : 0 | BS EN 16590-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT |
| BS PD IEC TR 62685 : 2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) |
| 12/30243084 DC : 0 | BS EN 1034-21 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
| 13/30276226 DC : 0 | BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| DIN EN 1807-1:2013-06 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| DIN EN 15467:2015-03 | FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 15572 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| CEI EN 50495 : 2011 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| EN 15339-2:2007 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| I.S. EN 16590-1:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT (ISO 25119-1:2010 MODIFIED) |
| PREN ISO 13856-2 : DRAFT 2011 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURESENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO/DIS 13856-2:2011) |
| I.S. EN 415-10:2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| ISO 14990-1:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements |
| I.S. EN 1807-2:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| CLC/TS 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| I.S. EN 1570-1:2011 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS |
| I.S. EN 16564:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| I.S. EN 15571:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| I.S. EN 16500:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| I.S. EN 16590-4:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES (ISO 25119-4:2010 MODIFIED) |
| UNI EN 15180 : 2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1034-17:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| UNE-EN ISO 13856-1:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
| 16/30322398 DC : 0 | BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS |
| I.S. EN 60601-1-2:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| I.S. EN ISO 14118:2018 | SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP (ISO 14118:2017) |
| I.S. EN 16590-2:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED) |
| UNE-EN 16500:2015 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
| NF EN ISO 19085-1 : 2017 | WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNE-EN ISO 19085-1:2018 | Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) |
| NF EN 61496-2 : 2014 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS) |
| 16/30314039 DC : 0 | BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| UNI EN 1034-27 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
| NF EN ISO 13855 : 2010 | SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| NF EN 1570-2 : 2016 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| UNI EN 1034-21 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
| DIN EN 12409:2011-12 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| DIN EN 609-1:2010-07 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| DIN EN 415-5:2010-04 | Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009) |
| DIN EN 1034-3:2012-02 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
| DIN EN 12978:2009-10 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| DIN EN 1034-14:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter (includes Amendment A1:2009) |
| DIN EN 1870-16:2013-01 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| DIN EN 13675:2010-10 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010) |
| DIN EN 13418:2013-08 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| I.S. EN 861:2007 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| BS EN 12203 : 2003 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| BS EN 13035-3 : 2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| BS EN 13457 : 2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| BS EN 710 : 1998 | SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| UNE-EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| BS EN 13954 : 2005 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 859 : 2007 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| BS EN 13418:2013 | Plastics and rubber machines. Winding machines for film or sheet. Safety requirements |
| 15/30286010 DC : 0 | BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| BS EN 528:2008 | Rail dependent storage and retrieval equipment. Safety requirements |
| BS EN 12409 : 2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| BS EN 15067:2007 | Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements |
| I.S. EN 859:2007 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES |
| BS EN 415-6:2013 | Safety of packaging machines Pallet wrapping machines |
| I.S. EN 13871:2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 14010:2004 | |
| EN 528:2008 | Rail dependent storage and retrieval equipment - Safety requirements |
| EN 12463:2014 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| I.S. EN 1870-16:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING |
| I.S. EN 13570:2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13367:2005 | CERAMIC MACHINES - SAFETY - TRANSFER PLATFORMS AND CARS |
| UNI EN 15746-2 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| EN 12203:2003+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
| EN 1010-2:2006+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
| EN 13418:2013 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
| DIN EN 15067:2008-03 | Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
| EN 1034-17:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
| EN 13102:2005+A1:2008 | Ceramic machines - Safety - Loading and unloading of fine clay tiles |
| DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| EN 13379:2001+A1:2013 | Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements |
| EN 1034-5:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
| EN 12044:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
| EN 12355:2003+A1:2010 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
| EN 13112:2002+A1:2009 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements |
| UNE-EN 972:1999 | TANNERY MACHINES. RECIPROCATING ROLLER MACHINES. SAFETY REQUIREMENTS. |
| EN 1034-6:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender |
| EN 61131-6:2012 | Programmable controllers - Part 6: Functional safety |
| EN 60601-1-2:2015 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| EN 1034-21:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines |
| EN 13534:2006+A1:2010 | Food processing machinery - Curing injection machines - Safety and hygiene requirements |
| EN 13035-7:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass |
| NF EN 201 : 2009 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| EN 13114:2002+A1:2009 | Tannery machines - Rotating process vessels - Safety requirements |
| EN 12409:2008+A1:2011 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| UNI EN 12463 : 2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 12100-2:2004-04 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| EN 13035-6:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out |
| EN 13113:2002+A1:2010 | Tannery machines - Roller coating machines - Safety requirements |
| EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
| EN 13035-9:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations |
| EN 13457:2004+A1:2010 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements |
| EN 1034-13:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units |
| DIN EN 999:1998-12 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| 15/30302620 DC : 0 | BS EN ISO 19085-4 - WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES |
| DIN EN 15949:2012-05 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| I.S. EN 16252:2012 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
| 03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
| 11/30247811 DC : 0 | BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| I.S. EN 61496-3:2001 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO DIFFUSE REFLECTION (AOPDDR) |
| UNE-EN 1870-13:2008 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| I.S. EN 16590-3:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE (ISO 25119-3:2010 MODIFIED) |
| DIN EN 16590-2:2014-11 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) |
| UNE-EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| 15/30326831 DC : 0 | BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| I.S. EN ISO 11111-6:2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 11111-6:2005) |
| UNE-EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| 11/30243078 DC : 0 | BS EN 1034-16 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| I.S. EN ISO 16090-1:2018 | MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017) |
| UNI EN 16500 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| UNI EN 13035-5 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING |
| ANSI/AAMI/IEC 60601-1-2:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| BS EN 15954-2:2013 | Railway applications. Track. Trailers and associated equipment General safety requirements |
| BS EN 61131-6:2012 | Programmable controllers Functional safety |
| 12/30260942 DC : 0 | BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 1672-1 : DRAFT 2012 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 14/30285733 DC : 0 | BS EN ISO 16092-1 - MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS |
| BS EN 1034-16:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Paper and board making machines |
| BS EN 15162:2008 | Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws |
| 12/30257838 DC : 0 | BS EN 62046 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| BS EN 16500:2014 | Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements |
| PREN 1114-3 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| DIN EN 1807-2:2013-06 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013 |
| 12/30259421 DC : 0 | BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 12/30255086 DC : 0 | BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| 03/306593 DC : DRAFT APR 2003 | BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| BS EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Common safety requirements |
| UNE-EN 691-1:2013 | Safety of woodworking machines - Part 1: Common requirements |
| NF EN 16474 : 2015 | PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS |
| BS EN ISO 13855:2010 | Safety of machinery. Positioning of safeguards with respect to the approach speeds of parts of the human body |
| DIN EN 15164:2008-09 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES |
| UNI EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| 17/30325424 DC : 0 | BS ISO 25119-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
| 12/30259995 DC : 0 | BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 16590-3:2015-04 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified) |
| BS EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
| 12/30270038 DC : 0 | BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| BS ISO 12643-5:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Stand-alone platen presses |
| 03/118895 DC : 0 | EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| DIN EN 16590-1:2014-11 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified) |
| BS EN 61784-3:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. General rules and profile definitions |
| 13/30276223 DC : 0 | BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| BS EN 13035-7 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS |
| UNE-EN ISO 13856-2:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) |
| 04/301783 DC : DRAFT JAN 2004 | EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES |
| CSA Z142 : 2010 : FR | CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
| BS EN 1672-1:2014 | Food processing machinery. Basic concepts Safety requirements |
| PREN 15746-2 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN 13035-7:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (includes Amendment A1:2009) |
| DIN EN 1570-1:2015-01 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings (includes Amendment A1:2014) |
| CSA Z142 : 2010 : R2014 | CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
| UNI EN 16252 : 2013 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
| UNI EN 15165 : 2014 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ANSI B11.0 : 2015 | SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT |
| I.S. EN 15164:2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES |
| I.S. EN 15746-2:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| BS EN 13035-5 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING |
| UNI EN ISO 10218-2 : 2011 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION |
| BS EN 15061 : 2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| EN 61784-3:2016/A1:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS (IEC 61784-3:2016/A1:2017) |
| I.S. EN 15180:2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 15955-2:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| IEC 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| EN ISO 16090-1:2018 | Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017) |
| UNI EN 15949 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| PREN 16985 : DRAFT 2016 | SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| EN ISO 14118:2018 | Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017) |
| CLC/TR 62685:2011 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010) |
| PREN 289 : DRAFT 2012 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN ISO 13856-1 : 2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS |
| NF EN 15339-2 : 2007 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS |
| EN 12013:2018 | Plastics and rubber machines - Internal mixers - Safety requirements |
| I.S. EN 60204-32:2008 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| IEC TS 62046:2008 | Safety of machinery - Application of protective equipment to detect the presence of persons |
| I.S. EN ISO 8230-1:2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| IEC 60204-33:2009 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| DIN EN 1494:2009-05 | MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT |
| DIN EN 1010-1:2011-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010) |
| DIN EN 13114:2010-03 | Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009) |
| DIN EN 1870-14:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| DIN EN 13112:2011-03 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009) |
| DIN EN 12203:2010-07 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009 |
| DIN EN 12463:2015-02 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| DIN EN 12301:2015-12 (Draft) | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| DIN EN 12331:2015-12 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| DIN EN 12417:2009-07 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| DIN EN 1417:2015-03 | Plastics and rubber machines - Two roll mills - Safety requirements; German version EN 1417:2014 |
| DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 13102:2009-05 | CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES |
| DIN EN 1870-13:2013-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| DIN EN 13379:2016-06 (Draft) | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 14010:2009-12 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009) |
| DIN EN 620:2011-07 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials (includes Amendment A1:2010) |
| DIN EN 693:2011-11 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| DIN EN 14655:2010-11 | Food processing machinery - Baguette slicers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 14656:2010-10 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010) |
| DIN EN 13035-3:2010-02 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines (includes Amendment A1:2009) |
| DIN EN 12044:2010-03 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009) |
| UNE-EN 289:2014 | Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
| BS EN 13570 : 2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 1034-3:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
| BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN ISO 11111-1:2016 | Textile machinery. Safety requirements Common requirements |
| BS EN 1034-14 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER |
| BS EN 15095 : 2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| BS EN 13379 : 2001 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1034-5 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
| BS EN 14673 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| BS EN 13534 : 2006 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13042-2:2009-12 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding (includes Amendment A1:2009) |
| BS EN 620 : 2002 | |
| UNE-EN 13418:2013 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
| UNE-EN 609-1:2017 | Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
| 06/30154990 DC : 0 | BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| I.S. EN 13114:2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| I.S. EN 12203:2003 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| I.S. EN 289:2014 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 14656:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| I.S. EN 13042-2:2004 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING |
| EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| I.S. EN 13954:2005 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13035-9:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| I.S. EN 415-6:2013 | SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES |
| I.S. EN 13379:2001 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| I.S. EN 12331:2015 | FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13885:2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1034-13:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS |
| I.S. EN 13113:2002 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 1494:2000 | MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT |
| I.S. EN 422:2009 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 1870-1:1999-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| I.S. EN 15095:2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| EN 16564:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| I.S. EN 12750:2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| I.S. EN 13534:2006 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1034-6:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
| I.S. EN 12409:2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 13102:2006 | CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES |
| I.S. EN 12044:2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12629-1:2000 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 13035-3:2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| I.S. EN 13418:2013 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| I.S. EN ISO 11111-1:2016 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016) |
| I.S. EN 12355:2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 1034-5:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
| I.S. EN 930:1998 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12978:2003 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 609-1:2017 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| I.S. EN 1870-14:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| I.S. EN 13675:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| I.S. EN ISO 13849-1:2015 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015) |
| I.S. EN 13985:2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| I.S. EN 1034-14:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER |
| I.S. EN 201:2009 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| EN 15571:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| DIN EN 1034-5:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters (includes Amendment A1:2009) |
| I.S. EN 1010-1:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| I.S. EN 415-5:2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| I.S. EN 1417:2014 | PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS |
| DIN EN 15339-2:2007-06 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| I.S. EN 14673:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| DIN EN 13379:2013-05 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13112:2002 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 972:1998 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 14655:2005 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1034-6:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender (includes Amendment A1:2009) |
| I.S. EN 710:1998 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| DIN EN 1845:2008-06 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
| I.S. EN 1845:2007 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 620:2002 | |
| DIN EN 1760-2:2001-07 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| I.S. EN 13457:2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 609-1:2017-04 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| I.S. EN 1870-4:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 13390:2002 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN ISO 16093:2017-10 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| I.S. EN 1034-3:2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
| I.S. EN 12463:2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 528:2008 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 13390 : 2010 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 61496-2 : 2014 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS) |
| DIN EN 15954-2:2013-11 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| UNI EN 691-1 : 2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN ISO 10218-2:2011 | Robots and robotic devices. Safety requirements for industrial robots Robot systems and integration |
| 12/30244783 DC : 0 | BS EN ISO 13856-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| NF EN 15571 : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| BS EN 15906:2011 | Winter maintenance equipment. Snow removal machines with rotating tools. Specification and clearing capacity |
| I.S. EN 848-1:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| 17/30325430 DC : 0 | BS ISO 25119-4 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES |
| 13/30286103 DC : 0 | BS EN 12331 - FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 13871 : DRAFT 2012 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 13379 : DRAFT 2016 | PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| 16/30339514 DC : 0 | BS EN 17003 - ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| NF EN 16564 : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| 15/30296744 DC : 0 | BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
| 09/30201246 DC : 0 | BS EN 710:1997/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT ASSOCIATED EQUIPMENT |
| 14/30272245 DC : 0 | BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS |
| 10/30232428 DC : DRAFT DEC 2010 | BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| BS EN 61496-2:2013 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| 09/30175681 DC : 0 | BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| BS EN 1034-17:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines |
| 13/30280054 DC : 0 | BS EN 16590-4 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES |
| 12/30253907 DC : DRAFT JULY 2012 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS |
| NF EN 15164 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES |
| DIN EN 15061:2009-05 | Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008) |
| 10/30233212 DC : 0 | BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| 17/30325427 DC : 0 | BS ISO 25119-3 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE |
| BS EN 1807-2:2013 | Safety of woodworking machines. Band sawing machines Log sawing machines |
| BS EN 15164:2008 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines |
| 16/30331346 DC : 0 | BS EN ISO 14118 - SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP |
| BS EN 1010-2 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| UNI EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| 17/30317170 DC : 0 | BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN ISO 8230-1 : 2009 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| BS EN 415-8:2008 | Safety of packaging machines Strapping machines |
| DD CLC/TS 62046:2008 | Safety of machinery. Application of protective equipment to detect the presence of persons |
| 09/30181706 DC : 0 | BS EN 12355:2003/A1 - FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| NF EN 50495 : 2010 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| DIN EN 15165:2015-01 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 05/30130673 DC : DRAFT MAR 2005 | BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 15165:2014 | Food processing machinery. Forming machines. Safety and hygiene requirements |
| BS EN ISO 19085-1:2017 | Woodworking machines. Safety Common requirements |
| BS EN ISO 13856-2:2013 | Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars |
| I.S. EN 15949:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| 01/120061 DC : DRAFT JAN 2001 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
| UNE-EN ISO 13855:2011 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| I.S. EN 61784-3:2016 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS |
| ISO 12648:2006 | Graphic technology Safety requirements for printing press systems |
| BS EN 1034-21:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Coating machines |
| DIN EN 15094:2009-04 | Safety of machinery - Safety requirements for cold flat rolling mills |
| DIN EN ISO 10218-2:2012-06 | Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
| PD IEC/TS 61496-4-2:2014 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using reference pattern techniques (VBPDPP) |
| UNE-EN 16564:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| BS EN 15094:2008 | Safety of machinery. Safety requirements for cold flat rolling mills |
| UNE-EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
| 05/19981967 DC : 0 | BS EN 1034-6 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: PULPERS |
| BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
| 04/30110212 DC : DRAFT MAR 2004 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
| ISO 16090-1:2017 | Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements |
| DIN EN 16474:2015-08 | PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
| UNE-EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| I.S. EN 15093:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| CEI CLC/TR 62685 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) |
| EN 16252:2012 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| NF EN 15572 : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| I.S. EN 1570-2:2016 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| UNI EN 1807-2 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| I.S. EN 60947-5-3:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| I.S. EN 15572:2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| I.S. EN 15339-2:2007 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS |
| NF EN ISO 10218-2 : 2011 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEM AND INTEGRATION |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| UNI EN 415-10 : 2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| BIS IS/ISO 12643-5 : 2010 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 5: STAND-ALONE PLATEN PRESSES |
| UNE-EN ISO 10218-2:2011 | Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
| I.S. EN ISO 13856-2:2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013) |
| ISO 12649:2004 | Graphic technology Safety requirements for binding and finishing systems and equipment |
| 16/30338566 DC : 2016-06 | BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1034-21:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
| I.S. EN 12013:2018 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| DIN EN 15746-2:2016-02 (Draft) | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015 |
| UNE-EN 1870-14:2008 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
| UNI EN 1034-16 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| PREN 12301 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| NF EN 15165 : 2014 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13035-7 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS |
| I.S. EN 15162:2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC TR 62685:2010 | Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs) |
| I.S. EN 14886:2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
| I.S. EN 60204-1:2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 12750:2013-05 | Safety of woodworking machines - Four sided moulding machines |
| DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
| DIN EN 12355:2011-02 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 1034-13:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units (includes Amendment A1:2009) |
| DIN EN 13113:2011-05 | Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010) |
| DIN EN 848-3:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| DIN EN 13954:2010-12 | Food processing machinery - Bread slicers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13736:2009-11 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| DIN EN 692:2009-10 | Machine tools - Mechanical presses - Safety (includes Amendment A1:2009) |
| DIN EN 848-1:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| DIN EN 422:2009-10 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 930:2010-07 | Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements (includes Amendment A2:2009) |
| DIN EN 12629-1:2011-01 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements (includes Amendment A1:2010) |
| UNE-EN 710:1998 | SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT. |
| DIN EN 13885:2011-02 | Food processing machinery - Clipping machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13985:2009-11 | Machine tools - Safety - Guillotine shears (includes Amendment A1:2009) |
| DIN EN 14673:2010-10 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010) |
| DIN EN 13035-9:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (includes Amendment A1:2010) |
| BS EN 848-1 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| BS EN 999 : 1999 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| UNE-EN 15954-2:2014 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| BS EN 12629-1 : 2001 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
| BS EN 1417:2014 | Plastics and rubber machines. Two-roll mills. Safety requirements |
| BS EN 13898 : 2003 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| IEC 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| UNE-EN 15955-2:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| BS EN 12355 : 2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 861 : 2007 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| BS EN 13102 : 2005 | CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES |
| BS EN 1034-3:2011 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Rereelers and winders |
| IEC 61784-3:2016 RLV | Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions |
| UNE-EN 848-1:2008 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
| UNE-EN 848-3:2013 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| EN 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| UNE-EN 60204-1:2007 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| UNE-EN 693:2001 | Machine tools - Safety - Hydraulic presses |
| EN 13985:2003+A1:2009 | Machine tools - Safety - Guillotine shears |
| EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| EN 15095:2007+A1:2008 | Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements |
| UNI EN 13042-2 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING |
| UNI EN 14655 : 2010 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13035-9 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| UNI EN 13379 : 2013 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1870-13 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| UNI EN 12581 : 2010 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| UNI EN 12203 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| UNI EN 15095 : 2009 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| UNI EN 13113 : 2010 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 972 : 2010 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
| UNI EN 13736 : 2009 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| UNI EN 13954 : 2010 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 692 : 2009 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| UNI EN 15954-2 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 848-3 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| UNI EN 12750 : 2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| UNI EN ISO 12100-2 : 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| UNI EN 13367 : 2009 | CERAMIC MACHINES - SAFETY - TRANSFER PLATFORMS AND CARS |
| UNI EN 14673 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| UNI EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| UNI EN 1870-16 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| UNI EN 1845 : 2008 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 860 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANNING MACHINES |
| UNI EN 13035-3 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| UNI EN 415-6 : 2013 | SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES |
| UNI EN 13457 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12981 : 2009 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 13871 : 2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1010-2 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| UNI EN 12417 : 2009 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| UNI EN 15067 : 2008 | PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS |
| UNI EN 13418 : 2013 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| UNI EN 859 : 2012 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| UNI EN 13112 : 2010 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 848-1 : 2013 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| UNI EN 12978 : 2009 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| UNI EN 12629-1 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNI EN 201 : 2010 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 710 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| UNI EN 1034-6 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
| UNI EN 14656 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| UNI EN 415-5 : 2010 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| UNI EN 1870-14 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| UNI EN 13885 : 2010 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13534 : 2010 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 1034-27:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems |
| UNI EN 13898 : 2009 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| EN 860:2007+A2:2012 | Safety of woodworking machines - One side thickness planing machines |
| UNI EN 1870-4 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| UNI EN 1870-1 : 2009 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| UNI EN 1760-2 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| UNI EN 12409 : 2011 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 16590-2 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
| UNI EN 930 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 869 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
| UNI EN 12044 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 999 : 2008 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| UNI EN 14070 : 2009 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNI EN 693 : 2011 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| UNI EN 15955-2 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 13985 : 2009 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| UNI EN 861 : 2012 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| UNI EN 1494 : 2009 | MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT |
| UNI EN 14010 : 2009 | SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES |
| UNI EN 1034-5 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
| UNI EN 14886 : 2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
| UNI EN 1034-14 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER |
| UNI EN 13102 : 2009 | CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES |
| UNI EN 422 : 2009 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12355 : 2010 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13570 : 2010 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1034-3 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
| UNI EN 13675 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| UNI EN 1034-13 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS |
| UNI EN 289 : 2014 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| UNI EN 13114 : 2010 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| UNE-EN 50223:2016 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| UNI EN 15164 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES |
| UNI EN 1807-1 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| DIN EN 1034-16:2012-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| ISO 16092-1:2017 | Machine tools safety — Presses — Part 1: General safety requirements |
| 14/30293313 DC : 0 | BS EN ISO 19085-2 - WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES |
| UNI EN 16590-4 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES |
| BS EN 15571:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines |
| DIN EN 1010-2:2011-05 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery (includes Amendment A1:2010) |
| BS EN 15093:2008 | Safety of machinery. Safety requirements for hot flat rolling mills |
| 08/30178810 DC : DRAFT MAY 2008 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| BS EN 15949:2012 | Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
| 14/30298206 DC : 0 | BS EN 1570-2 - SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| 04/30124330 DC : 0 | EN 15067-1 - PLASTICS AND RUBBER MACHINES - WELDING MACHINES FOR PLASTICS - PART 1: SAFETY REQUIREMENTS FOR FILM CONVERTING MACHINES FOR BAGS AND SACKS |
| CLC/TS 62046:2008 | Safety of machinery - Application of protective equipment to detect the presence of persons |
| BS EN 16590-1:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems General principles for design and development |
| 14/30296658 DC : 0 | BS IEC 62046 ED1.0 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| UNI EN ISO 13856-2 : 2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS |
| PREN 12013 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| 09/30198762 DC : 0 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| DIN EN 1570-2:2014-06 (Draft) | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| 13/30255092 DC : 0 | BS EN 1417 - PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS |
| UNI EN 15162 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
| I.S. EN 848-3:2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| UNI EN 1034-17 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| 16/30318928 DC : 0 | BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES |
| 13/30276220 DC : 0 | BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| I.S. EN 692:2005 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| 05/19981951 DC : 0 | BS EN 1034-13 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: AUXILIARY EQUIPMENT FOR DE-WIRING BALES AND UNITS |
| PREN 848-3 : DRAFT 2010 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| 11/30227089 DC : 0 | BS EN 1034-3 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
| DIN EN 15572:2015-12 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| BS EN 61496-3:2001 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR) |
| 12/30263881 DC : 0 | BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| 09/30180832 DC : DRAFT AUG 2009 | BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT |
| BS EN 1570-2:2016 | Safety requirements for lifting tables Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
| 08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| C22.2 NO. 14-18 | Industrial control equipment |
| UTEC 79 160 : 2008 | SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| BS EN 15572:2015 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines |
| 14/30263884 DC : 0 | BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| BS EN 415-10:2014 | Safety of packaging machines General Requirements |
| BS EN 16474:2015 | Plastics and rubber machines. Tyre curing machines. Safety requirements |
| DIN EN 15093:2009-06 | Safety of machinery - Safety requirements for hot flat rolling mills |
| 14/30293310 DC : 0 | BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS |
| BS EN ISO 16093:2017 | Machine tools. Safety. Sawing machines for cold metal |
| UNE-EN 1570-2:2017 | Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
| 12/30255089 DC : 0 | BS EN 16474 - PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
| 14/30297793 DC : 0 | BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES |
| I.S. CLC TS 62046:2005 | SAFETY OF MACHINERY- APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| BS EN 1807-1:2013 | Safety of woodworking machines. Band sawing machines Table band saws and band re-saws |
| 14/30304361 DC : 0 | BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS |
| PD IEC/TS 61496-4-3:2015 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using stereo vision techniques (VBPDST) |
| PREN 15180 : DRAFT 2011 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| 13/30280051 DC : 0 | BS EN 16590-3 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE |
| BS EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| 09/30181661 DC : 0 | BS EN 13035-3:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| PREN 1034-3 : DRAFT 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
| 04/30126179 DC : DRAFT DEC 2004 | EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| UNI EN ISO 13855 : 2010 | SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| DIN EN 1034-17:2012-11 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
| DIN EN 16500:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| 12/30260299 DC : 0 | BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 00/707575 DC : DRAFT APR 2000 | ISO/DIS 12100-1 - SAFETY OF MACHINERY - BASIC CONCEPTS AND GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY AND METHODOLOGY |
| BS EN 15955-2:2013 | Railway applications. Track. Demountable machines and associated equipment General safety requirements |
| BS EN 1034-27:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll handling systems |
| BS EN 13035-6 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT |
| NF EN 1672-1 : 2016 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 04/30086349 DC : DRAFT APR 2004 | EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| UNE-EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
| I.S. EN 1034-16:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| DIN EN 16500 E : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| DIN EN 13035-6:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (includes Amendment A1:2009) |
| DIN EN ISO 8230-1:2009-05 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| I.S. EN 1807-1:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| UNE-EN 1672-1:2015 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| I.S. EN 1034-27:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
| I.S. EN 15061:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| S.R. CLC/TS 62046:2008 | SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| PREN 15467 : DRAFT 2012 | FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 16093:2017 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
| I.S. EN 15467:2014 | FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 15094:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| I.S. EN 15954-2:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| PREN 17003 : DRAFT 2016 | ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| 16/30335146 DC : 0 | BS EN 16985 - SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 12013:2018 | Plastics and rubber machines. Internal mixers. Safety requirements |
| ISO 14118:2017 | Safety of machinery — Prevention of unexpected start-up |
| ISO 12643-5:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Stand-alone platen presses |
| BS EN 12301 : 2000 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| I.S. EN 13035-5:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING |
| I.S. EN 13035-7:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS |
| I.S. EN 15166:2008 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12301:2000 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| EN 13035-3:2003 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines |
| EN 620:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| DIN EN 710:2010-10 | Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment (includes Amendment A1:2010) |
| DIN EN 861:2012-09 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| DIN EN 13814:2005-06 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| DIN EN 528:2009-02 | Rail dependent storage and retrieval equipment - Safety requirements |
| DIN EN 201:2010-02 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 972:2011-07 | Tannery machines - Reciprocating roller machines - Safety requirements (includes Amendment A1:2010) |
| DIN EN 859:2012-09 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| DIN EN 1870-1:2009-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| DIN EN 860:2012-09 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| BS EN 415-5 : 2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| BS EN 13885 : 2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Part 1: Common safety requirements |
| UNE-EN 14655:2006 | Food processing machinery - Baguette slicers - Safety and hygiene requirements |
| DIN EN 12301:2010-02 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| BS EN 13675 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| BS EN 1010-1 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 13871:2014 | Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements |
| BS EN 869 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
| BS EN 12417 : 2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| BS EN 1870-1 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| 14/30238347 DC : 0 | BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 11111-6 : 2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 11111-6:2005) |
| BS EN 13367 : 2005 | CERAMIC MACHINES - SAFETY - TRANSFER PLATFORMS AND CARS |
| BS EN 13736 : 2003 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| BS EN 13112 : 2002 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| BS EN 15339-2:2007 | Thermal spraying. Safety requirements for thermal spraying equipment Gas control units |
| BS EN 1034-6 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
| BS EN 201:2009 | Plastics and rubber machines. Injection moulding machines. Safety requirements |
| BS EN 930 : 1997 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
| UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
| UNE-EN 13114:2002 | Tannery machines- Rotating process vessels - Safety requirements. |
| UNE-EN 415-6:2014 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| BS EN 12978 : 2003 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| BS EN 13985 : 2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| IEC 61131-6:2012 | Programmable controllers - Part 6: Functional safety |
| ISO 10218-2:2011 | Robots and robotic devices Safety requirements for industrial robots Part 2: Robot systems and integration |
| BS EN 972 : 1998 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
| IEC 60601-1-2:2007 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
| UNE-EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
| BS EN 12750:2013 | Safety of woodworking machines. Four sided moulding machines |
| BS EN 693 : 2001 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| ISO 13856-1:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
| BS EN 1870-4:2012 | Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| BS EN 12331:2015 | Food processing machinery. Mincing machines. Safety and hygiene requirements |
| BS EN 422:2009 | Plastics and rubber machines. Blow moulding machines. Safety requirements |
| UNI EN 12301 : 2008 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| ISO 11111-1:2016 | Textile machinery Safety requirements Part 1: Common requirements |
| BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNE-EN 860:2007 | Safety of woodworking machines - One side thickness planing machines |
| BS EN 14010 : 2003 | |
| BS EN 13035-9 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| BS EN 1760-2 : 2001 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| ISO 16093:2017 | Machine tools — Safety — Sawing machines for cold metal |
| ISO 13856-2:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars |
| BS EN 12044 : 2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| BS EN 1870-13 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| UNE-EN 13112:2002 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements. |
| UNE-EN 12409:2009 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| BS EN 13114 : 2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| BS EN 13113 : 2002 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| BS EN 60204-33:2011 | Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment |
| UNE-EN 1870-16:2013 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
| BS ISO 14990-1:2016 | Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements |
| ISO 11111-6:2005 | Textile machinery Safety requirements Part 6: Fabric manufacturing machinery |
| UNE-EN 13871:2015 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| BS EN 1494 : 2001 | MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT |
| BS EN ISO 13849-1:2015 | Safety of machinery. Safety-related parts of control systems General principles for design |
| UNE-EN 859:2008 | Safety of woodworking machines - Hand fed surface planing machines |
| UNE-EN 620:2002 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| UNE-EN ISO 13849-1:2016 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| BS EN 860 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| UNE-EN 13113:2002 | Tannery machines - Roller coating machines - Safety requirements. |
| UNE-EN ISO 11111-1:2016 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
| DIN EN 15095:2009-06 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| DIN EN 999:2008-10 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEED OF PARTS OF THE HUMAN BODY |
| EN 691-1:2012 | Safety of woodworking machines - Part 1: Common requirements |
| EN 13814:2004 | Fairground and amusement park machinery and structures - Safety |
| EN 1570-1:2011+A1:2014 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
| EN 15467:2014 | Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements |
| EN 13885:2005+A1:2010 | Food processing machinery - Clipping machines - Safety and hygiene requirements |
| EN 692:2005+A1:2009 | Machine tools - Mechanical presses - Safety |
| EN ISO 13856-1:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
| EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements |
| EN 201:2009 | Plastics and rubber machines - Injection moulding machines - Safety requirements |
| EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| EN 15067:2007 | Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
| EN 1417:2014 | Plastics and rubber machines - Two-roll mills - Safety requirements |
| EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
| EN 13035-5:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking |
| EN 1494:2000+A1:2008 | Mobile or movable jacks and associated lifting equipment |
| EN ISO 11111-1:2016 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
| EN 14656:2006+A1:2010 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
| EN 422:2009 | Plastics and rubber machines - Blow moulding machines - Safety requirements |
| EN 415-8:2008 | Safety of packaging machines - Part 8: Strapping machines |
| EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills |
| EN ISO 13856-2:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) |
| EN 15164:2008 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| EN 1672-1:2014 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| EN 609-1:2017 | Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
| EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment |
| EN 1870-16:2012 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
| EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| EN 1870-13:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN 16590-4:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified) |
| EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills |
| EN 13954:2005+A1:2010 | Food processing machinery - Bread slicers - Safety and hygiene requirements |
| EN 15166:2008 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
| EN 930:1997+A2:2009 | Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements |
| EN 16500:2014 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
| EN 869:2006+A1:2009 | Safety of machinery - Safety requirements for pressure metal diecasting units |
| EN 15162:2008 | Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws |
| EN 1870-14:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
| EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
| EN 1845:2007 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
| EN 16590-3:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified) |
| EN 16590-2:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) |
| EN 1870-1:2007+A1:2009 | Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws |
| EN 15165:2014 | Food processing machinery - Forming machines - Safety and hygiene requirements |
| EN 13871:2014 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| EN 16590-1:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified) |
| EN 14673:2006+A1:2010 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
| EN 12978:2003+A1:2009 | Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
| EN 693 : 2001 COR 2011 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| EN 859:2007+A2:2012 | Safety of woodworking machines - Hand fed surface planing machines |
| EN ISO 13855:2010 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| EN 14886:2008 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
| EN 861:2007+A2:2012 | Safety of woodworking machines - Surface planing and thicknessing machines |
| EN 14655:2005+A1:2010 | Food processing machinery - Baguette slicers - Safety and hygiene requirements |
| EN 15572:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines |
| EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
| EN 415-6:2013 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
| EN 14010:2003+A1:2009 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| EN ISO 10218-2:2011 | Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
| EN 15180:2014 | Food processing machinery - Food depositors - Safety and hygiene requirements |
| EN 289:2014 | Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
| EN 415-5:2006+A1:2009 | Safety of packaging machines - Part 5: Wrapping machines |
| EN 848-3:2012 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| EN 13390:2002+A1:2009 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements |
| EN 15906:2011 | Winter maintenance equipment - Snow removal machines with rotating tools - Specification and clearing capacity |
| EN 13736:2003+A1:2009 | Safety of machine tools - Pneumatic presses |
| EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
| UNI EN 528 : 2009 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| ISO 19085-1:2017 | Woodworking machines Safety Part 1: Common requirements |
| 14/30265058 DC : 0 | BS EN ISO 13850 - SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN |
| 12/30159217 DC : 0 | BS EN 60601-1-2 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| BS EN 691-1:2012 | Safety of woodworking machines Common requirements |
| DIN EN 1034-21:2012-11 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
| I.S. EN ISO 16092-1:2018 | MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017) |
| DIN EN 15955-2:2013-09 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN 691-1:2013-01 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| 09/30206358 DC : DRAFT SEP 2009 | BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 13814:2005 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| DIN EN 1672-1:2014-12 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 10/30179839 DC : 0 | BS EN 1010-5:2005/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD |
| I.S. EN 1870-1:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| IEC 62046:2018 | Safety of machinery - Application of protective equipment to detect the presence of persons |
| 16/30318924 DC : 0 | BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES') |
| I.S. EN 1870-13:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| BS EN 15166:2008 | Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements |
| PREN 15571 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| 11/30251974 DC : 0 | BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 15165:2014 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 12/30260496 DC : 0 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| S.R. CLC/TS 61496-3:2008 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 3: PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO DIFFUSE REFLECTION (AOPDDR) |
| 11/30239643 DC : 0 | BS EN ISO 13856-2 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS |
| 15/30300474 DC : DRAFT FEB 2015 | BS ISO 19085-5 - WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS |
| DIN EN 16590-4:2014-11 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified) |
| 12/30247814 DC : 0 | BS EN 1034-27 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
| CLC/TS 50418 : 2004 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PASSIVE INFRA-RED PROTECTIVE DEVICES (PIPDS) |
| 09/30201995 DC : 0 | BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| 03/311615 DC : DRAFT AUG 2003 | CENELEC TS 50418 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PASSIVE INFRA-RED PROTECTIVE DEVICES (PIPDS) |
| BS EN 16590-4:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Production, operation, modification and supporting processes |
| I.S. EN 1010-2:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| DIN EN 15180:2015-01 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 15571:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| 16/30331355 DC : 0 | BS EN ISO 19085-8 - WOODWORKING MACHINES - SAFETY - PART 8: WIDE BELT CALIBRATING AND SANDING MACHINES |
| I.S. EN 12417:2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| I.S. EN 16474:2015 | PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS |
| BIS IS/ISO 12643-1 : 2009 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 1034-27:2012-12 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems |
| 17/30356573 DC : 0 | BS IEC 62046 ED1.0 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| 08/30180969 DC : DRAFT APR 2008 | BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES |
| BS EN 15180:2014 | Food processing machinery. Food depositors. Safety and hygiene requirements |
| BS EN ISO 13856-1:2013 | Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
| BS ISO 12649:2004 | Graphic technology. Safety requirements for binding and finishing systems and equipment |
| 05/19981949 DC : DRAFT MAY 2005 | BS EN 1034-14 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLICERS |
| 05/19981969 DC : DRAFT JUN 2005 | BS EN 1034-5 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
| S.R. CLC/TR 62685:2011 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010 (EQV)) |
| DD CLC/TS 61496-3:2008 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR) |
| CSA Z142 :2010 | CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
| UNE-EN 16252:2013 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| UNI EN 16590-3 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE |
| I.S. EN 61131-6:2012 | PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012 (EQV)) |
| UNI EN 16590-1 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT |
| I.S. EN 61496-2:2013 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS) |
| I.S. EN 415-8:2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| I.S. EN ISO 13856-1:2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013) |
| BS EN 15746-2 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 50495:2010 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| I.S. EN ISO 19085-1:2017 | WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017) |
| I.S. EN ISO 13855:2010 | SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| EN 12331:2015 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| UNI EN 15166 : 2009 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1672-1 : 2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 15/30279801 DC : 0 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 13035-6 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT |
| ANSI/ISO 12100-2 : 2007 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| PREN 1417 : DRAFT 2013 | PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS |
| EN 12301:2000+A1:2008 | Plastics and rubber machines - Calenders - Safety requirements |
| DIN EN 1870-4:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 60204-33:2011 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT |
| IEC TS 61496-4-3:2015 | Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using stereo vision techniques (VBPDST) |
| I.S. EN 13035-6:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT |
| I.S. EN 50223:2015 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| UNE-EN 12463:2006 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| DIN EN 13390:2011-02 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 13570:2011-02 | Food processing machinery - Mixing machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 415-6:2013-09 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| DIN EN 13534:2011-02 | Food processing machinery - Curing injection machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN ISO 13849-1:2016-06 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| DIN EN 13457:2010-10 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements; German version EN 13457:2004+A1:2010 |
| DIN EN 1760-2:2009-08 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| DIN EN 13367:2010-05 | Ceramic machines - Safety - Transfer platforms and cars (includes Amendment A1:2008 + Corrigendum AC:2009) |
| DIN EN 289:2014-09 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 13871:2015-01 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1845:2007 | Footwear manufacturing machines. Footwear moulding machines. Safety requirements |
| BS EN 1034-13 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS |
| IEC 61784-3:2016+AMD1:2017 CSV | Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| BS EN 609-1:2017 | Agricultural and forestry machinery. Safety of log splitters Wedge splitters |
| BS EN 692 : 2005 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| BS EN 14656 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| BS EN 13814:2004 | Fairground and amusement park machinery and structures. Safety |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| BS EN 1870-16:2012 | Safety of woodworking machines. Circular sawing machines Double mitre sawing machines for V cutting |
| BS EN 848-3:2012 | Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines |
| IEC 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| I.S. EN 860:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| BS EN 60204-1 : 2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| BS EN 13042-2 : 2004 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING |
| BS EN 60204-32:2008 | Safety of machinery. Electrical equipment of machines Requirements for hoisting machines |
| BS EN 14655 : 2005 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13390 : 2002 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1870-14 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| BS EN 12463:2014 | Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements |
| ISO 13855:2010 | Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body |
| EN 1034-14:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter |
| EN 1034-3:2011 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
| EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| CEN/TS 13763-27:2003 | Explosives for civil uses - Detonators and relays - Part 27: Definitions, methods and requirements for electronic initiation systems |
| EN 61496-3:2001 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| EN 13042-2:2004+A1:2009 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding |
| EN 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| DIN EN 1570-2:2017-03 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| EN 12629-1:2000+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements |
| DIN EN 14886:2008-06 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
| UNI EN 620 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR FIXED BELT CONVEYORS FOR BULK MATERIALS |
| EN 1034-16:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| DIN EN 13898:2009-09 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| EN 60204-33:2011 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| EN 13570:2005+A1:2010 | Food processing machinery - Mixing machines - Safety and hygiene requirements |
| EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
| DIN EN 15746-2:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011) |
| EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| UNE-EN 1034-5:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
| UNE-EN 860:2007+A2:2012 | Safety of woodworking machines - One side thickness planing machines |
| UNE-EN 12203:2004 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
| UNE-EN 13390:2002 | Food processing machinery- Pie and tart machines - Safety and hygiene requirements. |
| CSA C22.2 No. 60601.1.2 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| CEI EN IEC 62061:2023 | Safety of machinery - Functional safety of safety-related control systems |
| UNE-EN 15746-2:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| UNE-EN 859:2008+A2:2012 | Safety of woodworking machines - Hand fed surface planing machines |
| UNE-EN 415-5:2007 | Safety of packaging machines - Part 5: Wrapping machines |
| UNE-EN 1034-6:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender |
| UNE-EN 12044:2006 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
| UNE-EN 12629-1:2001 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FORM CONCRETE AND CALCIUM-SILICATE. SAFETY. PART 1: COMMON REQUIREMENTS |
| UNE-EN 1570-1:2012 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
| UNE-EN 1034-14:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter |
| UNE-EN 1034-13:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| AS/NZS 4024.1603:2019 | Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| IEC 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| ISO 9001:2015 | Quality management systems — Requirements |
| IEC 61131-2:2017 | Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| ISO/IEC 90003:2014 | Software engineering Guidelines for the application of ISO 9001:2008 to computer software |
| IEC TS 62046:2008 | Safety of machinery - Application of protective equipment to detect the presence of persons |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.