ISO 291:2008
Current
Current
The latest, up-to-date edition.
Plastics Standard atmospheres for conditioning and testing
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian
Published date
22-04-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 291:2008 sets out specifications relating to the conditioning and testing of all plastics and all types of test specimen at constant atmospheric conditions.
Special atmospheres applicable to a particular test or material or simulating a particular climatic environment are not included in this International Standard.
| DevelopmentNote |
Supersedes ISO/DIS 291. (04/2008)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 291:2008-08 | Identical |
| NF EN ISO 291 : 2008 | Identical |
| NBN EN ISO 291 : 2008 | Identical |
| NEN EN ISO 291 : 2008 | Identical |
| NS EN ISO 291 : 3ED 2008 | Identical |
| I.S. EN ISO 291:2008 | Identical |
| PN EN ISO 291 : 2010 | Identical |
| UNI EN ISO 291 : 2008 | Identical |
| SS-EN ISO 291 : 2008 | Identical |
| UNE-EN ISO 291:2008 | Identical |
| EN ISO 291:2008 | Identical |
| NS 9504 : 1ED 1985 | Identical |
| BS 2782-0:1982 | Similar to |
| SAC GB/T 2918 : 1998 | Identical |
| DIN EN 62:1977-11 | Corresponds |
| BS EN ISO 291:2008 | Identical |
| UNE 53003:1985 | Identical |
| SN EN ISO 291:2008 | Identical |
| 08/30180284 DC : DRAFT JUNE 2008 | BS EN 1465 - ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| I.S. EN 13121-3:2016 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| NF EN 62631-1 : 2011 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL |
| I.S. EN ISO 10350-1:2017 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017) |
| BS 2782-3 Method 365B:1981 | Methods of testing plastics. Mechanical properties Determination of indentation hardness by means of a durometer (Shore hardness) |
| BS ISO 15040:1999 | Composites. Prepregs. Determination of gel time |
| BS EN ISO 16396-2:2017 | Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| UNE-EN 60695-11-5:2017 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| ISO 11963:2012 | Plastics Polycarbonate sheets Types, dimensions and characteristics |
| BS EN 62788-1-4:2016 | Measurement procedures for materials used in photovoltaic modules Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength |
| BS ISO 15850:2014 | Plastics. Determination of tension-tension fatigue crack propagation. Linear elastic fracture mechanics (LEFM) approach |
| 11/30239977 DC : 0 | BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| BS ISO 25217:2009 | Adhesives. Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens |
| 94/304105 DC : DRAFT MAR 1994 | PREN 1400 - CHILD CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
| 13/30255888 DC : 0 | BS ISO 5660-1 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 1: HEAT RELEASE RATE (CONE CALORIMETER METHOD) AND SMOKE PRODUCTION RATE (DYNAMIC MEASUREMENT) |
| UNE-EN ISO 9988-2:2015 | Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006) |
| PREN ISO 7792-2 : DRAFT 2011 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 16245-5:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS |
| I.S. EN ISO 877:1997 | |
| I.S. EN ISO 7792-2:2012 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012) |
| PREN 438-2 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| AFAP-2 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - SMOKE GENERATION |
| UNI EN ISO 15015 : 2011 | PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS |
| ISO 23560:2015 | Woven polypropylene sacks for bulk packaging of foodstuffs |
| PREN 14869-1 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| ISO 19821:2017 | Determination of span rating for natural fibre-reinforced plastic composite (NFC) deck boards |
| BS ISO 17467-1:2012 | Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement General |
| BS 2782-1 Method 140B:1993 | Methods of testing plastics. Thermal properties Determination of the burning behaviour of flexible vertical specimens in contact with a small-flame ignition source |
| I.S. EN 1400-2:2002 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - PART 2: MECHANICAL REQUIREMENTS AND TESTS |
| 06/30144978 DC : DRAFT JAN 2006 | EN ISO 15014 - PLASTICS - EXTRUDED SHEETS OF POLY(VINYLIDENE FLUORIDE) (PVDF) - REQUIREMENTS AND TEST METHODS |
| BS ISO 2113:1996 | Reinforcement fibres. Woven fabrics. Basis for a specification |
| BS ISO 18946:2011 | Imaging materials. Reflection colour photographic prints. Method for testing humidity fastness |
| BS ISO 25179:2010 | Adhesives. Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives |
| 10/30211370 DC : DRAFT JUNE 2010 | BS ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
| BS ISO 6402-2 : 94 AMD 10652 | |
| 12/30257998 DC : 0 | BS ISO 11357-2 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT |
| BS EN ISO 1135-5:2015 | Transfusion equipment for medical use Transfusion sets for single use with pressure infusion apparatus |
| 16/30334902 DC : 0 | BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS |
| DIN ISO 175:1989-04 | PLASTICS - DETERMINATION OF THE EFFECTS OF LIQUID CHEMICALS, INCLUDING WATER |
| BS ISO 16525-7:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Environmental test methods |
| BS ISO 19699-1:2017 | Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood Test methods |
| BS ISO 18941:2017 | Imaging materials. Colour reflection prints. Test method for ozone gas fading stability |
| I.S. EN ISO 11358:1997 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - GENERAL PRINCIPLES |
| BS ISO 11528:2016 | Buildings and civil engineering works. Sealants. Determination of crazing and cracking following exposure to artificial or natural weathering |
| BS EN 60695-2-13 : 2010 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| DIN EN ISO 8510-2:2010-12 | Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006) |
| 07/30169692 DC : 0 | BS EN 60695-2-12 - FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| DIN EN 16245-3:2013-08 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| BS 2782-5 Method 552A:1981 | Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light |
| BS ISO 1926:2009 | Rigid cellular plastics. Determination of tensile properties |
| ISO 18263-2:2015 | Plastics Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Part 2: Preparation of test specimens and determination of properties |
| 16/30340793 DC : 0 | BS ISO 17281 - PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (GIC AND KIC) AT MODERATELY HIGH LOADING RATES (1 M/S) |
| CSA C22.2 No. 0.17 : 2000 : R2004 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| BS EN 17098-2:2018 | Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Method for film permeability determination using a static technique |
| I.S. EN ISO 1135-5:2015 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015) |
| BS 2782-1.135(1993) : 1993 AMD 10349 | METHODS OF TEST PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT |
| PD CEN/TR 14548:2003 | Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| BS EN 16245-3:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fibre |
| 13/30275837 DC : 0 | BS ISO 18944 - IMAGING MATERIALS - REFLECTION COLOUR PHOTOGRAPHIC PRINTS - TEST PRINT CONSTRUCTION AND MEASUREMENT |
| I.S. EN ISO 21509:2015 | PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS (ISO 21509:2006) |
| DIN EN ISO 21509:2015-10 | PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS (ISO 21509:2006) |
| 02/564514 DC : DRAFT OCT 2002 | BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| IEC 62899-201:2016 | Printed electronics - Part 201: Materials - Substrates |
| 12/30238122 DC : 0 | BS EN ISO 75-1 - PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO/DIS 75-1:2012) |
| 10/30231826 DC : 0 | BS EN 14869-2 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| BS 903-C2:1982 | Physical testing of rubber Determination of volume resistivity |
| DIN EN 15466-2:2009-10 | Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali; German version EN 15466-2:2009 |
| PD ISO/TR 18930:2001 | Imaging materials. Protocols for outdoor weathering experiments |
| BS EN ISO 30013:2011 | Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties |
| DIN ISO 8296:2008-03 | Plastics - Film and sheeting - Determination of wetting tension (ISO 8296:2003) |
| 08/30170332 DC : DRAFT JAN 2008 | BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 11667 : 1997 AMD 10676 | FIBRE REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCEMENT-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS |
| 14/30294070 DC : 0 | BS EN 59 - GLASS REINFORCED PLASTICS - MEASUREMENT OF HARDNESS BY MEANS OF A BARCOL IMPRESSOR |
| 08/30188330 DC : DRAFT AUG 2008 | BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| 11/30197617 DC : 0 | BS ISO 11855-5 - BUILDING ENVIRONMENT DESIGN - STANDARDS FOR THE DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 5: INSTALLATION |
| 04/30122909 DC : DRAFT SEP 2004 | ISO 19212 - ADHESIVES - DETERMINATION OF TEMPERATURE DEPENDENCE OF SHEAR STRENGTH |
| BS EN ISO 15527:2013 | Plastics. Compression-moulded sheets of polyethylene (PEUHMW, PE-HD). Requirements and test methods |
| BS ISO 15106-4:2008 | Plastics. Film and sheeting. Determination of water vapour transmission rate Gas-chromatographic detection sensor method |
| 06/30159593 DC : 0 | BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| BS ISO 13106:2014 | Plastics. Blow-moulded polypropylene containers for packaging of liquid foodstuffs |
| ASTM G 74 : 2013 : REDLINE | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
| BS ISO 24335:2006 | Laminate floor coverings. Determination of impact resistance |
| BS ISO 18352:2009 | Carbon-fibre-reinforced plastics. Determination of compression-after-impact properties at a specified impact-energy level |
| BS ISO 8605:2001 | Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification |
| CEI 89-38 : 2014 | FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE CHARACTERISTIC HEAT FLUX FOR IGNITION FROM A NON-CONTACTING FLAME SOURCE |
| 04/30078983 DC : DRAFT OCT 2004 | ISO 22088-4 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD |
| 05/30091855 DC : DRAFT MAR 2005 | ISO 1874-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 15015:2011-07 | Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011) |
| DIN EN ISO 16012:2016-02 | PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO 16012:2015) |
| 04/30078976 DC : DRAFT OCT 2004 | ISO 22088-3 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 3: BENT STRIP METHOD |
| BS ISO 17467-3:2012 | Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Fittings |
| 15/30315534 DC : 0 | BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 4894-2 : AMD 10662 | PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 13/30264474 DC : 0 | BS ISO 17541 - PLASTICS - QUANTITATIVE EVALUATION OF SCRATCH-INDUCED DAMAGE AND SCRATCH VISIBILITY |
| BS 2782-9 Method 930A:1977 | Methods of testing plastics. Sampling and test specimen preparation Preparation of test specimens by machining |
| 14/30292918 DC : 0 | BS ISO 18489 - POLYETHYLENE (PE) MATERIALS - DETERMINATION OF RESISTANCE TO SLOW CRACK GROWTH UNDER CYCLIC LOADING - CRACKED ROUND BAR TEST METHOD |
| ISO 13636:2012 | Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets |
| ISO 16525-6:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 6: Determination of pendulum-type shear impact |
| 13/30258014 DC : 0 | BS EN ISO 11358-1 - PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO/DIS 11358-1:2013) |
| 04/30115317 DC : 0 | BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS |
| BS ISO 13586 : 2000 | PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (G[IC] AND K[IC]) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH |
| DIN ISO 306:1990-09 | PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE |
| 13/30275218 DC : 0 | BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE |
| 12/30237820 DC : 0 | BS EN ISO 306 - PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO/DIS 306:2012) |
| 17/30351754 DC : DRAFT SEP 2017 | BS ISO 18944 - IMAGING MATERIALS - REFLECTION COLOUR PHOTOGRAPHIC PRINTS - TEST PRINT CONSTRUCTION AND MEASUREMENT |
| BS ISO 15987:2003 | Plastics. Film and sheeting. Biaxially oriented polyamide (nylon) films |
| ISO 14127:2008 | Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents |
| UNE-EN ISO 877-1:2011 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| UNI EN 15836-2 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| BIS IS 13360-5-4 : 2013 | PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 4: DETERMINATION OF IZOD IMPACT STRENGTH |
| BS EN 60216-1:2013 | Electrical insulating materials. Thermal endurance properties Ageing procedures and evaluation of test results |
| 12/30192217 DC | BS ISO 12856. Plastic railway sleepers (railroad ties) |
| I.S. EN ISO 11357-2:2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013) |
| BIS IS 13360-5-11 : 2013 | PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 11: DETERMINATION OF INDENTATION HARDNESS OF PLASTICS BY MEANS OF DUROMETER (SHORE HARDNESS) |
| BS ISO 13468-2 : 1999 AMD 16335 | PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - DOUBLE-BEAM INSTRUMENT |
| 07/30152076 DC : 0 | BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 14/30302995 DC : 0 | BS EN 16776 - RESILIENT FLOOR COVERINGS - HOMOGENEOUS AND HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION |
| CEI EN 62788-1-4 : 1ED 2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-4: ENCAPSULANTS - MEASUREMENT OF OPTICAL TRANSMITTANCE AND CALCULATION OF THE SOLAR-WEIGHTED PHOTON TRANSMITTANCE, YELLOWNESS INDEX, AND UV CUT-OFF WAVELENGTH |
| UNE-EN ISO 21509:2016 | Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006) |
| BS ISO 16241:2005 | Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) |
| BS ISO 15034:2000 | Composites. Prepregs. Determination of resin flow |
| IEC 60695-11-5:2016 RLV | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| ISO 16525-7:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 7: Environmental test methods |
| UNI EN 16245-5 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS |
| 09/30176542 DC : 0 | BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
| ISO 3616:2001 | Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression |
| BS 5734-1:1979 | Polyester moulding compounds for electrical and other purposes Methods of test |
| 09/30179580 DC : 0 | BS EN ISO 29664 - PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION |
| ISO 1926:2009 | Rigid cellular plastics Determination of tensile properties |
| ISO 15439-2:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 2: Pipes |
| INCITS/ISO/IEC 15457-3 : 2002 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| UNE-EN ISO 6721-1:2012 | Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011) |
| I.S. EN ISO 8510-2:2010 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 2: 180 DEGREE PEEL |
| ASTM D 4673 : 2016 : REDLINE | Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
| I.S. EN 455-4:2009 | MEDICAL GLOVES FOR SINGLE USE - PART 4: REQUIREMENTS AND TESTING FOR SHELF LIFE DETERMINATION |
| ISO 1110:1995 | Plastics Polyamides Accelerated conditioning of test specimens |
| I.S. EN 16245-4:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| I.S. CR 14376:2002 | ADHESIVES - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DESCRIPTION AND ASSESSMENT OF THE SETTING PROCESS |
| I.S. EN 60695-11-20:2015 | FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS |
| ISO 9352:2012 | Plastics — Determination of resistance to wear by abrasive wheels |
| ISO/TS 19392-3:2018 | Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 3: Determination and evaluation of resistance to rain erosion using water jet |
| I.S. EN ISO 15527:2013 | PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010) |
| I.S. EN 60695-2-13:2010 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| I.S. EN 15836-2:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| BS ISO 4603 : 1993 | TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS |
| BS EN 16153 : 2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| ISO 18937:2014 | Imaging materials Photographic reflection prints Methods for measuring indoor light stability |
| S.R. CEN TS 15534-1:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
| I.S. EN 15651-4:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| ISO 8296:2003 | Plastics — Film and sheeting — Determination of wetting tension |
| ISO 19252:2008 | Plastics — Determination of scratch properties |
| ISO 2528:2017 | Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method |
| UNE-EN 62788-1-4:2017 | Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength |
| I.S. EN ISO 13468-1:1997 | PLASTICS - DETERMINATION OF TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT |
| UNE 53974:2011 | Plastics. Expanded polystyrene (EPS) elements for floors with concrete applied in situ |
| UNI EN ISO 6721-1 : 2011 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| EN ISO 899-1:2017 | Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017) |
| UNI EN 16245-3 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| ISO 11833-1:2012 | Plastics Unplasticized poly(vinyl chloride) sheets Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| UNI EN 15860 : 2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| UNE-EN ISO 1135-3:2017 | Transfusion equipment for medical use - Part 3: Blood-taking sets for single use (ISO 1135-3:2016) |
| UNE-EN 15651-4:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways |
| UNE-EN ISO 15527:2014 | Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010) |
| UNE-EN ISO 22007-4:2017 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017) |
| UNE-EN ISO 30013:2012 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| I.S. EN 50655-1:2017 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| EN 14565:2004 | Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification |
| ISO 7823-2:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets |
| ONORM EN ISO 6721-1 : 2011 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| ASTM D 5944 : 1996 | Test Method for Determination of Temperature of Deflection Under Load (Withdrawn 1998) |
| ONORM EN ISO 178 : 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD 1:2013) |
| DIN EN ISO 20568-2:2015-07 (Draft) | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| ASTM D 5927 : 2017 : REDLINE | Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
| I.S. EN ISO 899-1:2017 | PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP (ISO 899-1:2017) |
| ISO 16241:2005 | Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) |
| ISO 22621-5:2010 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 5: Fitness for purpose of the system |
| ISO 16869:2008 | Plastics Assessment of the effectiveness of fungistatic compounds in plastics formulations |
| ASTM D 5941 : 1996 | Standard Test Method for Determination of Izod Impact Strength (Withdrawn 1998) |
| ASTM D 5870 : 2016 : REDLINE | Standard Practice for Calculating Property Retention Index of Plastics |
| ASTM D 6865 : 2017 : REDLINE | Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials |
| I.S. EN ISO 180:2001 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000) |
| I.S. EN ISO 11963:2012 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
| I.S. EN ISO 11833-1:2012 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
| EN ISO 845:2009 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
| I.S. EN ISO 4577:1999 | PLASTICS - POLYPROPYLENE AND PROPYLENE-COPOLYMERS - DETERMINATION OF THERMAL OXIDATIVE STABILITY IN AIR - OVEN METHOD |
| I.S. EN ISO 527-1:2012 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
| DIN EN 13592:2015-09 (Draft) | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| DIN EN 14598-3:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| DIN EN ISO 10618:2004-11 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004) |
| DIN EN 13421:2006-05 | Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
| DIN EN 14598-2:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements |
| DIN EN ISO 868:2003-10 | PLASTICS AND EBONITE - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A DUROMETER (SHORE HARDNESS) |
| BS EN ISO 23667:2007 | Packaging. Transport packaging for dangerous goods. Rigid plastics and plastics composite IBCs. Compatibility testing |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN ISO 11248:2000 | Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures |
| BS EN 14415:2004 | Geosynthetic barriers. Test method for determining the resistance to leaching |
| BS EN 14869-2:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Thick adherends shear test |
| ISO 18489:2015 | Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method |
| BS EN ISO 11833-2:2006 | Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness less than 1 mm |
| BS EN ISO 11542-2 : 1999 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN ISO 1622-2:1999 | Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 1965-2:2011 | Structural adhesives. Corrosion Determination and classification of corrosion to a brass substrate |
| UNE-EN ISO 175:2011 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| UNE-EN 16245-2:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| BS EN ISO 7765-1:2004 | Plastics film and sheeting. Determination of impact resistance by the free-falling dart method Staircase methods |
| 16/30330036 DC : 0 | BS EN 62788-2 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 2: POLYMERIC MATERIALS USED FOR FRONTSHEETS AND BACKSHEETS |
| BS EN ISO 3344:1997 | Reinforcement products. Determination of moisture content |
| IEC 62326-20:2016 | Printed boards - Part 20: Printed circuit boards for high-brightness LEDs |
| UNE-EN ISO 11339:2010 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| BS EN ISO 11343:2005 | Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions. Wedge impact method |
| BS EN ISO 868:2003 | Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness) |
| BS EN ISO 8295:2004 | Plastics. Film and sheeting. Determination of the coefficients of friction |
| UNE-EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| BS EN ISO 9142:2003 | Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| BS EN ISO 5659-2:2017 | Plastics. Smoke generation Determination of optical density by a single-chamber test |
| BS EN ISO 13468-1:1997 | Plastics. Determination of the total luminous transmittance of transparent materials Single-beam instrument |
| ISO 15015:2011 | Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods |
| BS EN 14118-3:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Specific requirements |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| ISO 2559:2011 | Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications |
| ISO 6383-2:1983 | Plastics Film and sheeting Determination of tear resistance Part 2: Elmendorf method |
| ISO 10964:1993 | Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners |
| I.S. EN ISO 7823-1:2003 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| I.S. EN ISO 11403-2:2012 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012) |
| DIN EN ISO 489:1999-08 | Plastics -Determination of refractive index (ISO 489:1999) |
| EN 12654-1:1998 | Textile glass - Yarns - Part 1: Designation |
| DIN EN 14879-4:2008-01 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| DIN EN ISO 9163:2005-07 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005 |
| EN 12586:2007+A1:2011 | Child use and care articles - Soother holder - Safety requirements and test methods |
| DIN ISO 7765-2:2009-02 | Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test (ISO 7765-2:1994) |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 12562:1999 | Textiles - Para-aramid multifilament yarns - Test methods |
| EN 12654-3:1998 | Textile glass - Yarns - Part 3: General requirements for general applications |
| DIN EN 14447:2005-07 | Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005 |
| EN 50655-1:2017 | Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds |
| DIN EN 13592:2017-05 | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| EN 12230:2003 | Surfaces for sports areas - Determination of tensile properties of synthetic sports surfaces |
| DIN EN ISO 175:2011-03 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| DIN EN ISO 306:2014-03 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
| EN ISO 23667:2007 | Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing (ISO 23667:2007) |
| DIN EN ISO 9142:2004-05 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) |
| DIN EN ISO 3672-2:2002-07 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 178:2013-09 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013) |
| EN 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| EN 62878-1-1:2015 | Device embedded substrate - Part 1-1: Generic specification - Test methods |
| EN 60695-2-12:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014) |
| NF EN ISO 10350-2 : 2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| EN 13121-3:2016 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| DIN EN ISO 20568-2:2017-10 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| DIN EN ISO 13445:2006-09 | Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003) |
| NBR ISO 16486-5 : 2014 | |
| I.S. EN 12230:2003 | SURFACES FOR SPORTS AREAS - DETERMINATION OF TENSILE PROPERTIES OF SYNTHETIC SPORTS SURFACES |
| ONORM EN ISO 179-1 : 2010 | PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST |
| I.S. EN ISO 6186:1999 | PLASTICS - DETERMINATION OF POURABILITY |
| ONORM EN ISO 306 : 2014 | PLASTICS - THERMOPLASTICS MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013) |
| NF EN ISO 179-1 : 2010 | PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST |
| VDI 3405 Blatt 1.1:2017-08 (Draft) | Additive manufacturing processes - Laser sintering of polymer parts - Qualification of materials |
| BS 2782-1.136(1994) : 1994 AMD 10687 | METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE SHORT-TERM PERFORMANCE OF THERMOSETTING MOULDING MATERIALS AT ELEVATED TEMPERATURES |
| NF ISO 25179 : 2010 | ADHESIVES - DETERMINATION OF THE SOLUBILITY OF WATER-SOLUBLE OR ALKALI-SOLUBLE PRESSURE-SENSITIVE ADHESIVES |
| DIN EN 13696:2009-02 | WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
| ONORM EN ISO 11542-2 : 2009 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 10119:2002 | Carbon fibre. Determination of density |
| ISO 19322:2018 | Resilient floor coverings — Specification for floor coverings based on thermoplastic polymers |
| BS 2782-4.465C(1990) : 1990 AMD 10677 | METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF MIGRATION OF PLASTICIZERS |
| 06/30160058 DC : 0 | BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| BS ISO 18188:2016 | Specification of polypropylene drinking straws |
| 11/30242926 DC : DRAFT MAY 2011 | BS ISO 12000 - PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS |
| BS ISO 17467-2:2012 | Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Pipes |
| BS ISO 21509 : 2006 | PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS |
| 13/30283691 DC : 0 | BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| I.S. EN ISO 12086-2:2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 455-4:2009 | Medical gloves for single use Requirements and testing for shelf life determination |
| ISO 4604:2011 | Reinforcement fabrics Determination of conventional flexural stiffness Fixed-angle flexometer method |
| UNE-EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| BS 2782-0:1982 | Methods of testing plastics Introduction |
| ISO 22621-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 1: General |
| 16/30340787 DC : 0 | BS ISO 13586 - PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (GIC AND KIC) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH |
| 17/30353428 DC : DRAFT JUNE 2017 | BS EN 17129 - CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION |
| BS EN 62631-1:2011 | Dielectric and resistive properties of solid insulating materials General |
| IEC TS 62989:2018 | Primary optics for concentrator photovoltaic systems |
| BS ISO 25137-2 : 2009 | PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISO 16616:2015 | Test methods for natural fibre-reinforced plastic composite (NFC) deck boards |
| DIN EN 15865:2009-08 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| BS EN 16245-5:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for core materials |
| 15/30292691 DC : DRAFT FEB 2015 | BS ISO 18188 - SPECIFICATION OF POLYPROPYLENE DRINKING STRAWS |
| 07/30165210 DC : 0 | BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| BS 2782-3:Method 352F:1996 | Methods of testing plastics. Mechanical properties Determination of impact resistance by the free-falling dart method (instrumented puncture test) |
| 02/121892 DC : DRAFT APR 2002 | PREN 14447 - FIBRE REINFORCED PLASTICS - GLASS MAT REINFORCED THERMOPLASTICS (GMT) - DETERMINATION OF FLOWABILITY AND SOLIDIFICATION |
| BS EN 60695-11-10:2013 | Fire hazard testing Test flames. 50 W horizontal and vertical flame test methods |
| ISO 18352:2009 | Carbon-fibre-reinforced plastics Determination of compression-after-impact properties at a specified impact-energy level |
| ISO 15114:2014 | Fibre-reinforced plastic composites — Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach |
| 13/30281054 DC : 0 | BS EN 28510-1 - ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| BS ISO 11359-2:1999 | Plastics. Thermomechanical analysis (TMA) Determination of coefficient of linear thermal expansion and glass transition temperature |
| I.S. EN ISO 10964:1998 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| BS 771-1:1980 | Phenolic moulding materials Specification for physical properties (excluding type L2 material) |
| UNE 104317:2011 | Waterproofing. Plunger range determination before the perforation of the waterproofing synthetic geomembranes for water reservoirs |
| UNE 116005:2012 | Manufacturing by additive of caps on plastics. Additive manufacturing. Preparation of test pieces |
| BS 2782-2.230A(1982) : 1982 | PHYSICAL TESTING OF RUBBER - DETERMINATION OF VOLUME RESISTIVITY |
| BS EN 60216-8:2013 | Electrical insulating materials. Thermal endurance properties Instructions for calculating thermal endurance characteristics using simplified procedures |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| 17/30349217 DC : 0 | BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 14/30304007 DC : 0 | BS EN 62899-2-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 2-1: CONDUCTIVE MATERIAL INK |
| UNE-EN 62788-1-6:2017 | Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
| 10/30205800 DC : 0 | BS ISO 15686-2 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 2: SERVICE LIFE PREDICTION PROCEDURES |
| PREN 17098-2 : DRAFT 2017 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE |
| ONORM EN ISO 15527 : 2013 | PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010) |
| 17/30342172 DC : 0 | BS ISO 20975-2 - CARBON-FIBRE-REINFORCED PLASTICS - METHODS FOR MEASUREMENT OF THROUGH-THICKNESS LAMINATE PROPERTIES - PART 2: CONSIDERING SIZE EFFECTS BY FLEXURAL TEST |
| BS 2782-5.550B(1996) : 1996 AMD 9494 | |
| 07/30175034 DC : DRAFT DEC 2007 | BS ISO 18352 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT ENERGY LEVEL |
| PREN 28510-1 : DRAFT 2013 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| CEI EN 60695-11-5 : 2006 | FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
| CEI EN 62631-1 : 2012 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL |
| BS ISO 27547-1:2010 | Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologies General principles, and laser sintering of test specimens |
| ISO 11566:1996 | Carbon fibre Determination of the tensile properties of single-filament specimens |
| DIN EN ISO 877-1:2016-09 (Draft) | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| BS 2782-1.121(1994) : 1994 AMD 8647 | METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - GENERAL TEST METHOD FOR DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD OF PLASTICS |
| DIN EN 16245-2:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| 04/30091671 DC : DRAFT APR 2004 | BS EN ISO 483 - PLASTICS - SMALL ENCLOSURES FOR CONDITIONING AND TESTING USING AQUEOUS SOLUTIONS TO MAINTAIN HUMIDITY AT CONSTANT VALUE |
| 07/30169693 DC : 0 | BS EN 60695-11-11 - FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE IGNITION CHARACTERISTIC HEAT FLUX FROM A NON-CONTACTING FLAME SOURCE |
| BS EN ISO 20028-2:2017 | Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties |
| 10/30211328 DC : 0 | BS ISO 30012 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF THE SIZE AND ASPECT RATIO OF CRUSHED OBJECTS |
| BS EN ISO 22007-4:2017 | Plastics. Determination of thermal conductivity and thermal diffusivity Laser flash method |
| BS 2782-3.353B(1991) : 1991 AMD 8634 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF MULTI-AXIAL IMPACT BEHAVIOUR BY THE INSTRUMENTED PUNCTURE TEST |
| ISO 2558:2010 | Textile glass chopped-strand mats for reinforcement of plastics Determination of time of dissolution of the binder in styrene |
| DIN EN ISO 1135-5:2016-06 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015) |
| BS ISO 3598:2011 | Textile glass. Yarns. Basis for a specification |
| CSA ISO/IEC 15457-3 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| 12/30254697 DC : 0 | BS ISO 16525-9 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 9: DETERMINATION OF HIGH-SPEED SIGNAL-TRANSMISSION CHARACTERISTICS |
| DIN EN ISO 1135-3 E : 2017 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
| BS ISO 2797:2017 | Textile glass. Rovings. Basis for a specification |
| 12/30258011 DC : 0 | BS ISO 11359-1 - PLASTICS - THERMOMECHANICAL ANALYSIS (TMA) - PART 1: GENERAL PRINCIPLES |
| 03/301805 DC : 0 | IEC 60695-11-6 TS ED.1 - FIRE HAZARD TESTING - PART 11-6: TEST FLAMES - COMPARATIVE BURNING CHARACTERISTICS OF TUBULAR POLYMERIC MATERIALS SUPPORTED IN A VERTICAL POSITION - APPARATUS AND TEST METHOD |
| BS 2782-5 Method 540A:1977 | Methods of testing plastics. Optical and colour properties, weathering Determination of resistance to change upon exposure under glass to daylight |
| BS ISO 11833-2 : 1998 AMD 16032 | PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - SHEETS OF THICKNESS LESS THAN 1 MM |
| 04/30106510 DC : DRAFT JUN 2004 | BS ISO 871 - PLASTICS - DETERMINATION OF IGNITION TEMPERATURE USING A HOT-AIR FURNACE |
| 16/30321526 DC : 0 | BS ISO 19935-1 - PLASTICS - TEMPERATURE MODULATED DSC - PART 1: GENERAL PRINCIPLES |
| 09/30200088 DC : 0 | BS EN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| BS ISO 871:2006 | Plastics. Determination of ignition temperature using a hot-air furnace |
| I.S. EN 62788-1-4:2016 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-4: ENCAPSULANTS - MEASUREMENT OF OPTICAL TRANSMITTANCE AND CALCULATION OF THE SOLAR-WEIGHTED PHOTON TRANSMITTANCE, YELLOWNESS INDEX, AND UV CUT-OFF WAVELENGTH |
| BS ISO 19212:2006 | Adhesives. Determination of temperature dependence of shear strength |
| 09/30192009 DC : DRAFT MAY 2009 | BS ISO 10352 - FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA |
| DIN EN 15336:2007-05 | Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified) |
| BS ISO 15105-1:2002 | Plastics. Film and sheeting. Determination of gas-transmission rate Differential-pressure method |
| BS ISO 11003-2:2001 | Adhesives. Determination of shear behaviour of structural adhesives Tensile test method using thick adherends |
| EN ISO 3219:1994 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
| 11/30248336 DC : 0 | BS ISO 17467-3 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 3: FITTINGS |
| DIN EN 14879-6:2010-04 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers |
| 14/30303657 DC : 0 | BS EN ISO 1135-3 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SET FOR SINGLE USE |
| BS ISO 18930:2011 | Imaging materials. Pictorial colour reflection prints. Methods for evaluating image stability under outdoor conditions |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| NF EN ISO 8510-2 : 2011 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 2: 180 DEGREE PEEL |
| BS ISO 17398:2004 | Safety colours and safety signs. Classification, performance and durability of safety signs |
| BS ISO 10352 : 97 AMD 9684 | FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA |
| ISO 12000:2014 | Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods |
| 18/30369387 DC : DRAFT APR 2018 | BS EN ISO 8130-13 - COATING POWDERS - PART 13: PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION |
| ISO 5660-1:2015 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| CSA C22.2 No. 0.17 : 2000 : R2013 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| 12/30254685 DC : DRAFT MAR 2012 | BS ISO 16525-5 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 5: SHEAR FATIGUE TESTING |
| BS ISO 16525-5:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of shear fatigue |
| ONORM EN ISO 11963 : 2013 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
| PREN 50655-1 : DRAFT 2015 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| ISO 11659-2:2004 | Textile machinery and accessories Machine parts in contact with textile processing oils Part 2: Determination of the impact on polymeric materials |
| 17/30365113 DC : 0 | BS EN 60455-3-8 ED.2.0 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
| UNI EN ISO 877-1 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| BS ISO 17281:2002 | Plastics. Determination of fracture toughness (<i>G</i><sub>ic</sub> and <i>K</i><sub>ic</sub>) at moderately high loading rates (1 m/s) |
| 02/565097 DC : DRAFT DEC 2002 | BS ISO 17398 - SAFETY COLOURS AND SAFETY SIGNS - DURABILITY OF SAFETY SIGNS |
| DIN ISO 16486-1:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014) |
| 10/30231832 DC : 0 | BS EN 14869-1 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| BS ISO 14127:2008 | Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents |
| UNI EN ISO 8510-2 : 2010 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 2: 180 DEGREES PEEL |
| BS ISO 11357-3:1999 | Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization |
| 09/30204161 DC : DRAFT MAY 2009 | BS EN 62631-1 - GUIDELINES FOR THE DETERMINATION OF DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL CONSIDERATIONS |
| 08/30192288 DC : 0 | BS EN ISO 179-1 - PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST |
| 11/30196213 DC : 0 | BS ISO 12817 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF OPENHOLE COMPRESSION STRENGTH |
| BS EN 60695-2-12 : 2010 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| DIN EN 15651-4:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| 07/30151497 DC : 0 | ISO 26842 - ADHESIVES - GUIDELINES FOR THE SELECTION OF ADHESIVES FOR INDOOR WOOD PRODUCTS BY DURABILITY TESTING |
| 10/30211421 DC : 0 | BS ISO 3598 - TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION |
| I.S. EN ISO 13274:2013 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013) |
| 07/30161721 DC : 0 | BS ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) |
| I.S. EN ISO 16396-2:2017 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017) |
| PREN 13592 : DRAFT 2015 | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| BS ISO 2897-2 : 1994 AMD 10661 | PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| CR 14376:2002 | Adhesives - Adhesives for paper and board, packaging and disposable sanitary products - Description and assessment of the setting process |
| BS ISO 16525-4:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies |
| BS 2782-1 Method 121A and 121B:1991 | Methods of testing plastics. Thermal properties Determination of temperature of deflection of plastics under a bending stress |
| DIN ISO 16486-5:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system (ISO 16486-5:2012) |
| ISO 15014:2007 | Plastics Extruded sheets of poly(vinylidene fluoride) (PVDF) Requirements and test methods |
| BS ISO 7391-2 : 1996 AMD 10746 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 08/30180281 DC : DRAFT JUNE 2008 | BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| UNI EN 15466-2 : 2009 | PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 2: DETERMINATION OF RESISTANCE AGAINST ALKALI |
| 04/30081681 DC : DRAFT OCT 2004 | ISO 22088-6 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD |
| DIN EN ISO 11357-2:2014-07 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013) |
| BS 2782-10:Method 1008B:1996 | Methods of testing plastics. Glass reinforced plastics Determination of flexural strength on rods made of roving-reinforced resin |
| DD CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
| 04/30078973 DC : DRAFT OCT 2004 | ISO 22088-2 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 2: CONSTANT TENSILE STRESS METHOD |
| BS EN 15865:2009 | Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners |
| 06/30153862 DC : DRAFT JULY 2006 | BS ISO 8031 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL PROPERTIES |
| 03/311412 DC : DRAFT JULY 2003 | IEC 60695-11-21 TS ED.1 - FIRE HAZARD TESTING - PART 11-21: TEST FLAMES - 500 W VERTICAL FLAME TEST FOR TUBULAR POLYMERIC MATERIALS |
| DIN EN 16776:2016-09 | RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION |
| ISO 10119:2002 | Carbon fibre Determination of density |
| EN ISO 11403-3:2014 | Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014) |
| DIN EN ISO 11855-5:2015-11 | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2012) |
| EN IEC 62631-2-1:2018 | Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods |
| I.S. EN ISO 7391-2:2006 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| PREN 15860 : DRAFT 2016 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| PREN ISO 75-1 : DRAFT 2012 | PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD PART 1: GENERAL TEST METHOD (ISO/DIS 75-1:2012) |
| ISO 3598:2011 | Textile glass Yarns Basis for a specification |
| I.S. EN ISO 16012:2015 | PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS |
| I.S. EN 62788-1-5:2016 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS |
| I.S. EN ISO 13468-2:2006 | PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT |
| BS ISO 28078-2:2009 | Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials Preparation of test specimens and determination of properties |
| UNE-EN 16245-3:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| UNE-EN 15466-3:2010 | Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles |
| I.S. EN ISO 178:2010 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010) |
| I.S. EN ISO 20028-2:2017 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
| ISO 18930:2011 | Imaging materials Pictorial colour reflection prints Methods for evaluating image stability under outdoor conditions |
| UNI EN 15870 : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| ISO 3341:2000 | Textile glass Yarns Determination of breaking force and breaking elongation |
| DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| ISO/TS 5660-4:2016 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release |
| ISO 19213:2017 | Implants for surgery — Test methods of material for use as a cortical bone model |
| UNE-EN ISO 1135-5:2016 | Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2015) |
| DIN EN ISO 16396-2:2017-07 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| ISO 10122:2014 | Reinforcement materials Tubular braided sleeves Basis for a specification |
| ISO 16486-3:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 3: Fittings |
| ISO 10371:1993 | Reinforcement materials — Braided tapes — Basis for a specification |
| ISO 9163:2005 | Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| ISO 2797:2017 | Textile glass — Rovings — Basis for a specification |
| CEI EN 60455-3-8 : 2014 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
| ONORM EN ISO 7391-2 : 2006 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISO 15439-3:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 3: Fittings |
| ISO 16486-4:2016 | Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 4: Valves |
| UNI EN ISO 11833-1 : 2012 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
| PREN ISO 306 : DRAFT 2012 | PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST)(ISO/DIS 306:2012) |
| ISO 10351:1992 | Plastics Determination of the combustibility of specimens using a 125 mm flame source |
| BS EN ISO 2507-1:2017 | Thermoplastics pipes and fittings. Vicat softening temperature General test method |
| UNI EN ISO 178 : 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| I.S. EN ISO 1183-2:2004 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD |
| ISO 28078-2:2009 | Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 16365-2:2014 | Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties |
| UNE-EN ISO 25137-2:2017 | Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009) |
| UNE-EN ISO 20028-2:2017 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017) |
| ISO 16525-5:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 5: Determination of shear fatigue |
| ISO 17398:2004 | Safety colours and safety signs — Classification, performance and durability of safety signs |
| ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
| ASTM D 5575 : 2007 : R2013 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| UNE-EN 62788-1-5:2017 | Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions |
| NF EN 60695-2-13 : 2011 AMD 1 2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| EN 62788-1-6:2017 | Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
| CSA C22.2 No. 0.17 : 2000 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| I.S. EN ISO 20568-2:2017 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| ISO 11003-1:2001 | Adhesives Determination of shear behaviour of structural adhesives Part 1: Torsion test method using butt-bonded hollow cylinders |
| EN ISO 11357-3:2018 | Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018) |
| ISO 4898:2010 | Rigid cellular plastics Thermal insulation products for buildings Specifications |
| ISO 8606:1990 | Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification |
| ISO 15108:1998 | Adhesives Determination of strength of bonded joints using a bending-shear method |
| ISO 4897:1985 | Cellular plastics Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
| NF EN ISO 10352 : 2011 | FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA |
| DIN EN ISO 1874-2:2013-03 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
| DIN EN ISO 5659-2:2016-02 (Draft) | PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017) |
| DIN EN ISO 1135-4:2016-06 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015) |
| DIN EN ISO 10350-2:2011-06 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| DIN EN 1464:2010-06 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| DIN EN 1465:2009-07 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| DIN EN ISO 23667:2007-10 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - RIGID PLASTICS AND PLASTICS COMPOSITE IBCS - COMPATIBILITY TESTING |
| DIN EN ISO 14530-2:2000-08 | Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999 |
| DIN EN ISO 177:2016-09 (Draft) | PLASTICS - DETERMINATION OF MIGRATION OF PLASTICIZERS (ISO 177:2016) |
| DIN EN ISO 483:2006-02 | Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005) |
| DIN EN ISO 899-2:2015-06 | PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING (ISO 899-2:2003 + AMD.1:2015) |
| DIN EN ISO 176:2005-05 | Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005) |
| DIN EN 14869-1:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| BS EN ISO 180 : 2001 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH |
| BS EN 12230:2003 | Surfaces for sports areas. Determination of tensile properties of synthetic sports surfaces |
| BS EN ISO 4894-2:1999 | Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 9653:2000 | Adhesives. Test method for shear strength of adhesive bonds |
| BS EN ISO 13468-2:2006 | Plastics. Determination of the total luminous transmittance of transparent materials Double-beam instrument |
| BS EN 1465:2009 | Adhesives. Determination of tensile lap-shear strength of bonded assemblies |
| BS EN ISO 15526-2:2004 | Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties |
| DIN EN ISO 4589-2:2016-03 (Draft) | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
| ISO 7823-3:2007 | Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets |
| BS EN 12586 : 2007 | CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS |
| UNE-EN ISO 177:2017 | Plastics - Determination of migration of plasticizers (ISO 177:2016) |
| BS EN ISO 1874-2:2012 | Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| UNE-EN ISO 8536-4:2013 | Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010) |
| BS EN ISO 14528-2:2000 | Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties |
| DIN EN ISO 6603-1:2000-10 | PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 1: NON-INSTRUMENTED IMPACT TESTING |
| UNE-EN ISO 1890:2010 | Reinforcement yarns - Determination of twist (ISO 1890:2009) |
| BS EN ISO 7823-3:2007 | Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets |
| BS EN ISO 4577:1999 | Plastics. Polypropylene and propylene-copolymers. Determination of thermal oxidative stability in air. Oven method |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS EN 1967:2002 | Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
| 03/106712 DC : 0 | IEC 62326-3 ED.1.0 - PRINTED BOARDS - PART 3: SAFETY CERTIFICATION OF RIGID PRINTED CIRCUIT BOARDS FOR ELECTRONIC ASSEMBLIES |
| BS EN 14598-2:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements |
| BS EN ISO 10618:2004 | Carbon fibre. Determination of tensile properties of resin-impregnated yarn |
| BS EN ISO 14125 : 1998 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| BS EN ISO 604:2003 | Plastics. Determination of compressive properties |
| BS EN ISO 14129:1998 | Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method |
| ISO 15310:1999 | Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method |
| DIN EN ISO 6259-1:2002-02 | THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD |
| I.S. EN ISO 11357-1:2016 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES (ISO 11357-1:2016) |
| I.S. EN ISO 15526-2:2004 | PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 1264-4:2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| I.S. EN 13592:2017 | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 7391-2:2006-06 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 10618:2004 | CARBON FIBRE - DETERMINATION OF TENSILE PROPERTIES OF RESINIMPREGNATED YARN |
| ONORM EN ISO 10352 : 2011 | FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA |
| DIN EN ISO 11833-1:2012-11 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
| I.S. EN ISO 1135-4:2015 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015) |
| DIN 53362:2003-10 | Determining the flexural rigidity of plastic film and woven textile fabrics with or without plastic coating by the cantilever method |
| I.S. EN ISO 15013:2007 | PLASTICS - EXTRUDED SHEETS OF POLYPROPYLENE (PP) - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11339:2010 | ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| I.S. EN ISO 14663-2:2006 | PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| NF EN ISO 11542-2 : 1999 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 845:2009 | CELLULAR PLASTICS AND RUBBERS - DETERMINATION OF APPARENT DENSITY |
| I.S. EN 28510-1:2014 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| I.S. EN ISO 179-1:2010 | PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST |
| DIN 53363:2003-10 | Determining the tear resistance of plastic film and sheeting by the trouser tear method |
| DIN EN ISO 11339:2010-06 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| DIN EN 1400-2:2002-12 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - PART 2: MECHANICAL REQUIREMENTS AND TESTS |
| DIN EN ISO 10964:1997-10 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| I.S. EN 1965-2:2011 | STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| I.S. EN ISO 2898-2:2008 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN ISO 11963:2012 | Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012) |
| DIN EN 28510-1:2014-07 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| DIN EN ISO 11343:2005-08 | ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH-STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| I.S. EN ISO 4589-2:2017 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
| DIN EN ISO 11501:2004-10 | Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995) |
| I.S. EN ISO 4894-2:1999 | PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 11833-2:2006-06 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998) |
| I.S. EN ISO 5659-2:2017 | PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017) |
| I.S. EN ISO 177:2017 | PLASTICS - DETERMINATION OF MIGRATION OF PLASTICIZERS (ISO 177:2016) |
| I.S. EN ISO 4892-1:2016 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| I.S. EN ISO 8256:2004 | PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH |
| I.S. EN 12586:2007 | CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 1464:2010 | ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD |
| I.S. EN 14869-1:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| I.S. EN 14869-2:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| EN 62788-1-4:2016 | Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength |
| I.S. EN ISO 11403-3:2014 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014) |
| I.S. EN ISO 306:2013 | PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013) |
| I.S. EN ISO 11542-2:1999 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 11963:2013-03 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
| I.S. EN 12654-1:1999 | TEXTILE GLASS - YARNS - DESIGNATION |
| I.S. EN ISO 13927:2015 | PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR (ISO 13927:2015) |
| I.S. EN ISO 604:2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| DIN 16972:1995-03 | COMPRESSION MOULDED PLATES MADE OF POLYETHYLENE HIGH DENSITY (PE-UHMW), (PE-HMW), (PE-HD) - TECHNICAL SPECIFICATIONS |
| I.S. EN 1966:2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| DIN EN ISO 877-1:2011-03 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| DIN EN ISO 15526-2:2004-10 | PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 12017:1997 | PLASTICS - POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS - TEST METHODS |
| I.S. EN ISO 1889:2009 | REINFORCEMENT YARNS - DETERMINATION OF LINEAR DENSITY |
| I.S. EN ISO 1874-2:2012 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
| I.S. EN ISO 6383-1:2015 | PLASTICS - FILM AND SHEETING - DETERMINATION OF TEAR RESISTANCE - PART 1: TROUSER TEAR METHOD (ISO 6383-1:2015) |
| DIN EN 13121-3:2016-10 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| DIN EN ISO 11502:2005-10 | PLASTICS - FILM AND SHEETING - DETERMINATION OF BLOCKING RESISTANCE |
| I.S. EN ISO 175:2010 | PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS |
| I.S. EN ISO 899-2:2003 | PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING (ISO 899-2:2003) |
| I.S. EN ISO 1890:2009 | REINFORCEMENT YARNS - DETERMINATION OF TWIST |
| I.S. EN 1465:2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| I.S. EN ISO 7823-3:2007 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS |
| UNI EN ISO 472 : 2013 | PLASTICS - VOCABULARY |
| NBR ISO 16486-2 : 2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 2: PIPES |
| OVE/ONORM EN 60695-2-12 : 2015 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010 + A1:2014) |
| BS 2782-3 Method 365D:1991 | Methods of testing plastics. Mechanical properties Determination of hardness by the ball indentation method |
| NBR IEC 60695-2-12 : 2013 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| BS 2782-5:Method 552A:1999 | Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources |
| BS 2782-6:Methods 620A to 620D:1991 | Methods of testing plastics. Dimensional properties Determination of density and relative density of non-cellular plastics - Methods 620A to 620D:Determination of density and relative density of non-cellular plastics |
| VDI 2736 Blatt 1:2016-07 | Thermoplastic gear wheels - Materials, material selection, production methods, production tolerances, form design |
| VDI 3958 Blatt 12:2004-02 | Environmental simulation - Effects of acidic precipitation on polymers - Test methods |
| VDI 3405 Blatt 1:2013-10 | Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control |
| BS 2782-5.540D(1999) : 1999 AMD 13148 | METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - GENERAL GUIDANCE |
| BS 5350-C12:1994 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests 180° peel test for flexible-to-flexible bonded assemblies (T-peel test) |
| NBR IEC 60695-2-13 : 2013 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| VDI 2083 Blatt 20:2016-10 (Draft) | Cleanroom technology - Determination of the desorption kinetics of materials after fumigating |
| OVE/ONORM EN 60695-2-13 : 2015 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010 + A1:2014) |
| BS 2782-0:1992 | Methods of testing plastics Introduction |
| BS 2782-8.830A(1999) : 1999 AMD 13097 | METHODS OF TESTING PLASTICS - OTHER PROPERTIES - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS |
| NBR ISO 16486-1 : 2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL |
| ONORM EN ISO 11403-2 : 2012 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012) |
| BS 2782-8.824A(1996) : 1996 AMD 15286 | METHODS OF TESTING PLASTICS - OTHER PROPERTIES - FILM AND SHEETING - DETERMINATION OF THE COEFFICIENTS OF FRICTION |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| BS 2782-5.531A(1999) : 1999 | PLASTICS - DETERMINATION OF REFRACTIVE INDEX |
| VDI 2019:2016-04 | Testing the adhesion of thermoplastic elastomers (TPE) on substrates |
| DIN EN ISO 1135-3:2017-05 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
| BS 7933-1:2007 | Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds |
| BS 903-C1:1991 | Physical testing of rubber Determination of surface resistivity |
| NBR ISO 16486-3 : 2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 3: FITTINGS |
| 10/30207724 DC : 0 | BS ISO 18941 - IMAGING MATERIALS - COLOUR REFLECTION PRINTS - TEST METHOD FOR OZONE GAS FADING STABILITY |
| DIN EN 15836-1:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| ASTM D 5575 : 2007 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| 06/30146379 DC : DRAFT SEP 2006 | ISO 15439-3 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 3: FITTINGS |
| DIN EN ISO 22007-6:2015-05 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
| EN 4691-1:2017 | Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification |
| UNI EN ISO 11357-3 : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION |
| ISO 472:2013 | Plastics — Vocabulary |
| 16/30319043 DC : 0 | BS EN ISO 4589-2 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST |
| 12/30254691 DC : DRAFT MAR 2012 | BS ISO 16525-7 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 7: ENVIRONMENTAL TEST METHODS |
| DIN EN ISO 22007-4:2016-10 (Draft) | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017) |
| BS ISO 17541:2014 | Plastics. Quantitative evaluation of scratch-induced damage and scratch visibility |
| BS ISO 5659-2:1994 | Plastics. Smoke generation Determination of specific optical density |
| BS EN ISO 22007-6:2015 | Plastics. Determination of thermal conductivity and thermal diffusivity Comparative method for low thermal conductivities using a temperature-modulation technique |
| BS ISO 22621-5:2010 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA) Fitness for purpose of the system |
| 15/30325650 DC : 0 | BS EN 50655-1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| 15/30327856 DC : 0 | BS ISO 20558-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 4600:1998 | PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - BALL OR PIN IMPRESSION METHOD |
| BS EN ISO 25137-2:2017 | Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 178 : 2010 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| BS EN ISO 8510-2:2010 | Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly 180 degree peel |
| ISO 15107:1998 | Adhesives Determination of cleavage strength of bonded joints |
| 05/30130524 DC : DRAFT MAR 2005 | ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL |
| EN ISO 11502:2005 | Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502:1995) |
| 13/30234849 DC : 0 | BS EN ISO 13927 - PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR |
| I.S. EN ISO 9142:2004 | ADHESIVES - GUIDE TO THE SELECTION OF STANDARD LABORATORY AGEING CONDITIONS FOR TESTING BONDED JOINTS |
| 17/30336222 DC : 0 | BS EN 62899-203 - PRINTED ELECTRONICS - PART 203 - MATERIALS - SEMICONDUCTOR INK |
| I.S. EN 60695-11-5:2017 | FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
| 11/30236286 DC : 0 | BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| BS ISO 15686-2:2012 | Buildings and constructed assets. Service life planning Service life prediction procedures |
| BS ISO 16525-1:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
| BS IEC 62899-202:2016 | Printed electronics Materials. Conductive ink |
| BS EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories |
| 08/30177314 DC : DRAFT JAN 2008 | BS ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION |
| 09/30206613 DC : 0 | BS EN 60695-11-20 ED.2 - FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS |
| BS ISO 15024:2001 | Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, <i>G</i><sub>ic</sub>, for unidirectionally reinforced materials |
| DIN EN 16245-4:2013-07 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| DIN ISO 18352:2017-11 | CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT-ENERGY LEVEL (ISO 18352:2009) |
| BS ISO 4900:2011 | Textile glass. Mats and fabrics. Determination of contact mouldability |
| BS ISO 19213:2017 | Implants for surgery. Test methods of material for use as a cortical bone model |
| 08/30160325 DC : DRAFT MAR 2008 | BS ISO 27547-1 - PLASTICS - PREPARATION OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS USING MOULDLESS TECHNOLOGIES - PART 1: GENERAL PRINCIPLES, AND LASER-SINTERING OF SPECIMENS |
| 07/30169691 DC : 0 | BS EN 60695-2-13 - FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITABILITY (GWIT) TEST METHOD FOR MATERIALS |
| BS EN 16776:2016 | Resilient floor coverings. Heterogeneous polyurethane floor coverings. Specification |
| 14/30295044 DC : 0 | BS ISO 19095-3 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 3: TEST METHODS |
| 10/30231835 DC : DRAFT SEP 2010 | BS EN 1965-2 - STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| BS ISO 15100:2000 | Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density |
| 14/30283167 DC : 0 | BS ISO 18263-2 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMENR PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 17/30342148 DC : 0 | BS ISO 19821 - DETERMINATION OF SPAN RATING FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS |
| 11/30211349 DC : 0 | BS ISO 13636 - PLASTICS - FILM AND SHEETING - NON-ORIENTED POLY(ETHYLENE TEREPHTHALATE) (PET) SHEETS |
| DIN EN ISO 11357-3:2013-04 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011) |
| 11/30242905 DC : 0 | BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISO 25179:2010 | Adhesives Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives |
| DIN ISO 16486-2:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes (ISO 16486-2:2012 + AMD 1:2014) |
| UNI EN 16245-4 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| ISO 4603:1993 | Textile glass — Woven fabrics — Determination of thickness |
| 17/30368428 DC : 0 | BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE |
| 11/30239983 DC : DRAFT MAR 2011 | BS EN 16245-4 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| 11/30192003 DC : 0 | BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS 2782-3.352E(1996) : 1996 AMD 15287 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF IMPACT RESISTANCE BY THE FREE-FALLING DART METHOD (STAIRCASE METHOD) |
| 01/121385 DC : 0 | ISO/DIS 15989 - PLASTICS - FILM AND SHEETING - MEASUREMENT OF WATER-CONTACT ANGLE OF CORONA-TREATED FILMS |
| 14/30295274 DC : 0 | BS EN 1794-3 - ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 3: REACTION TO FIRE - BURNING BEHAVIOUR OF NOISE REDUCING DEVICES AND CLASSIFICATION |
| UNE-EN 16465:2016 | Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering |
| DIN EN ISO 13274:2014-06 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013 + COR. 1:2014) |
| BS EN 16465:2015 | Plastics. Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering |
| UNI EN 455-4 : 2009 | MEDICAL GLOVES FOR SINGLE USE - PART 4: REQUIREMENTS AND TESTING FOR SHELF LIFE DETERMINATION |
| 07/30155372 DC : 0 | BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| ESPECIFICACION UNE 0059:2017 | Fiberglass reinforced polyester poles for overhead power distribution lines and telephony lines |
| UNE-EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| NF EN 60695-2-12 : 2011 AMD 1 2014 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| BS ISO 11403-2 : 95 AMD 10691 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - THERMAL AND PROCESSING PROPERTIES |
| BS ISO 10371:1993 | Fibre reinforced plastics. Braided tapes for composite materials reinforcement. Basis for a specification |
| I.S. EN 1794-3:2016 | ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 3: REACTION TO FIRE - BURNING BEHAVIOUR OF NOISE REDUCING DEVICES AND CLASSIFICATION |
| PD ISO/TS 5660-4:2016 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Measurement of low levels of heat release |
| BS ISO 10122:2014 | Reinforcement materials. Tubular braided sleeves. Basis for a specification |
| 13/30240167 DC : 0 | BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 06/30148148 DC : DRAFT MAR 2006 | EN ISO 2577 - PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF SHRINKAGE |
| 02/123818 DC : DRAFT OCT 2002 | BS EN 14565 - RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| UNI EN ISO 11358-1 : 2014 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES |
| BS 7933-1:1998 | Electric cables. Accessories. Material characterization Resinous compounds before cure and in the cured state |
| BS ISO 18937:2014 | Imaging materials. Photographic reflection prints. Methods for measuring indoor light stability |
| BS 2782-1.127A(1997) : 1997 | METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - GENERAL PRINCIPLES |
| 15/30300051 DC : 0 | BS EN 62788-1-4 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-4: ENCAPSULANTS - MEASUREMENT OF OPTICAL TRANSMITTANCE AND CALCULATION OF THE SOLAR-WEIGHTED PHOTON TRANSMITTANCE; YELLOWNESS INDEX AND UV CUT-OFF FREQUENCY |
| BS EN 14879-6:2009 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Combined linings with tile and brick layers |
| BS EN ISO 15015:2011 | Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods |
| BS EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation Methods of test |
| 12/30238119 DC : 0 | BS ISO 18937 - IMAGING MATERIALS - PHOTOGRAPHIC REFLECTION PRINTS - METHODS FOR MEASURING INDOOR LIGHT STABILITY |
| NFC 33 009-1 : 2008 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
| BS ISO 3341:2000 | Textile glass. Yarns. Determination of breaking force and breaking elongation |
| BS 2782-1:Method 140C:1993 | Methods of testing plastics. Thermal properties Determination of the combustibility of specimens using a 125 mm flame source |
| BS 2782-2.240A&B(1982) : LATEST | METHODS OF TESTING PLASTICS - ELECTRICAL PROPERTIES - DETERMINATION OF LOSS TANGENT AND PERMITTIVITY AT POWER AND AUDIO FREQUENCIES |
| 02/700016 DC : DRAFT JAN 2002 | BS EN 14350-1 CHILD CARE ARTICLES - DRINKING EQUIPMENT - GENERAL AND MECHANICAL REQUIREMENTS AND TEST METHODS |
| BS ISO 1110 : 1995 AMD 10263 | PLASTICS - POLYAMIDES - ACCELERATED CONDITIONING OF TEST SPECIMENS |
| BS ISO 18263-2:2015 | Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Preparation of test specimens and determination of properties |
| BS ISO 4604:2011 | Reinforcement fabrics. Determination of conventional flexural stiffness. Fixed-angle flexometer method |
| BS EN ISO 13274:2013 | Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs |
| DIN EN ISO 30013:2012-03 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| 11/30211730 DC : 0 | BS ISO 9352 - PLASTICS - DETERMINATION OF RESISTANCE TO WEAR BY ABRASIVE WHEELS |
| 15/30316097 DC : DRAFT FEB 2015 | BS EN 14903 - SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - DETERMINATION OF ROTATIONAL FRICTION |
| ONORM EN ISO 11343 : 2005 | ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH-STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| BS 2782-3 Method 359:1984 | Methods of testing plastics. Mechanical properties Determination of Charpy impact strength of rigid materials (Charpy impact flexural test) |
| BS 2782-10:Method 1008A:1996 | Methods of testing plastics. Glass reinforced plastics General considerations and preparation of rods for determination of mechanical properties on rods made from roving-reinforced resins |
| 14/30295038 DC : 0 | BS ISO 19095-1 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 1: GUIDELINES FOR THE APPROACH |
| UNE-EN ISO 16012:2016 | Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015) |
| BS EN ISO 11855-5:2015 | Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems Installation |
| BS ISO 2559:2011 | Textile glass. Mats (made from chopped or continuous strands). Designation and basis for specifications |
| 16/30337302 DC : 0 | BS EN ISO 22007-4 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD |
| 01/121538 DC : DRAFT APRIL 2001 | BS EN ISO 899-1 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP |
| BS 2782-1 Method 141:1986 | Methods of testing plastics. Thermal properties Determination of flammability by oxygen index |
| BS 2782-3.354A&B(1991) : 1991 AMD 8635 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF TENSILE-IMPACT STRENGTH |
| 06/30146370 DC : DRAFT SEP 2006 | ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL |
| BS ISO 15310 : 1999 AMD 15944 | REINFORCED PLASTICS - DETERMINATION OF THE IN-PLANE SHEAR MODULUS BY THE PLATE TWIST METHOD |
| 13/30257969 DC : 0 | BS ISO 17223 - PLASTICS - DETERMINATION OF YELLOWNESS INDEX AND CHANGE IN YELLOWNESS INDEX |
| BS 2782-3 Method 335A:1978 | Methods of testing plastics. Mechanical properties Determination of flexural properties of rigid plastics |
| 00/121497 DC : DRAFT APR 2000 | ISO/CD 3597-2 - TEXTILE GLASS REINFORCED PLASTICS DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN PART 2: DETERMINATION OF FLEXURAL STRENGTH |
| BS 2782-2.220&221(1983) : LATEST | METHODS OF TESTING PLASTICS - ELECTRICAL PROPERTIES - DETERMINATION OF ELECTRICAL STRENGTH: RAPIDLY APPLIED VOLTAGE METHOD AND STEP-BY-STEP METHOD |
| BS EN 59:2016 | Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester |
| BS ISO 3672-2 : 2000 AMD 13326 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 10366-2 : 94 AMD 10665 | PLASTICS - METHYL METHYLACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISO 3342:2011 | Textile glass Mats Determination of tensile breaking force |
| I.S. EN ISO 3219:1995 | PLASTICS - POLYMERS/RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS - DETERMINATION OF VISCOSITY USING A ROTATIONAL VISCOMETER WITH DEFINED SHEAR RATE |
| UNE-EN ISO 11358-1:2015 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| BS 2782-5.532A(1997) : 1997 | METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - SINGLE-BEAM INSTRUMENT |
| CEI EN 62788-1-6 : 1ED 2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE |
| BS ISO 2580-2 : 94 AMD 10660 | PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 1163-2 : 1995 AMD 10744 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS |
| 10/30215313 DC : 0 | BS ISO 18930 - IMAGING MATERIALS - PICTORIAL COLOUR REFLECTION PRINTS - METHODS FOR EVALUATING IMAGE STABILITY UNDER OUTDOOR CONDITIONS |
| 08/30165044 DC : DRAFT FEB 2008 | BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS 7825-3.9:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Flammability characteristics |
| 11/30238648 DC : DRAFT FEB 2011 | BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS ISO 13927 : 2001 AMD 14411 | PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR |
| ISO 20558-2:2018 | Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties |
| BS ISO 11359-1:2014 | Plastics. Thermomechanical analysis (TMA) General principles |
| BS 2782-8.821A(1979) : 1979 AMD 13432 | METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF THE GAS TRANSMISSION RATE OF FILMS AND THIN SHEETS UNDER ATMOSPHERIC PRESSURE (MANOMETRIC METHOD) |
| INCITS/ISO/IEC 15457-3 : 2002 : R2007 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| 03/102086 DC : DRAFT JAN 2003 | BS ISO 16241 - NOTCH TENSILE TEST TO MEASURE THE RESISTANCE TO SLOW CRACK GROWTH OF POLYETHYLENE MATERIALS FOR PIPES AND FITTING PRODUCTS (PENT) |
| EN 1264-4:2009 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| 02/120706 DC : DRAFT FEB 2002 | BS EN ISO 8256 - PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH |
| UNE-ISO 1926:2015 | Rigid cellular plastics. Determination of tensile properties |
| UNE-EN ISO 22007-6:2015 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014) |
| DIN EN 16153:2015-05 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| ISO 11528:2016 | Buildings and civil engineering works Sealants Determination of crazing and cracking following exposure to artificial or natural weathering |
| ISO 13468-1:1996 | Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument |
| UNE-EN 16776:2016 | Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification |
| DIN EN ISO 1183-1:2013-04 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| BS 2782-3.360A(1991) : 1991 AMD 15285 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF TEAR RESISTANCE OF PLASTICS FILM AND SHEETING BY THE ELMENDORF METHOD |
| BS ISO 15509:2001 | Adhesives. Determination of the bond strength of engineering-plastic joints |
| HD 631.1 : 200S2 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
| ISO 15686-2:2012 | Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures |
| I.S. EN ISO 877-1:2010 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| ISO 17541:2014 | Plastics Quantitative evaluation of scratch-induced damage and scratch visibility |
| IEC 62899-202:2016 | Printed electronics - Part 202: Materials - Conductive ink |
| ISO 2896:2001 | Rigid cellular plastics Determination of water absorption |
| ISO 12856-1:2014 | Plastics Plastic railway sleepers for railway applications (railroad ties) Part 1: Material characteristics |
| ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
| I.S. EN ISO 30013:2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011) |
| I.S. EN ISO 472:2013 | PLASTICS - VOCABULARY (ISO 472:2013) |
| I.S. EN 60455-2:2015 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| BS EN 13121-3:2016 | GRP tanks and vessels for use above ground Design and workmanship |
| I.S. EN 15860:2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 29664:2017 | PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010) |
| I.S. EN ISO 15015:2011 | PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS |
| EN ISO 1183-2:2004 | Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004) |
| I.S. EN 15870:2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| ISO 11357-3:2018 | Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization |
| ISO 15314:2004 | Plastics Methods for marine exposure |
| UNE-EN ISO 29664:2017 | Plastics - Artificial weathering including acidic deposition (ISO 29664:2010) |
| I.S. EN 16245-2:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| ISO 18944:2014 | Imaging materials Reflection colour photographic prints Test print construction and measurement |
| BS 2782-5 Method 550A:1981 | Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to natural weathering |
| EN ISO 6721-1:2011 | Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011) |
| I.S. EN IEC 62631-2-1:2018 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0,1 HZ TO 10 MHZ) - AC METHODS |
| I.S. EN 15836-1:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| ASTM D 5938 : 1996 | Standard Test Method for Determination of Tensile Properties (Withdrawn 1998) |
| ISO 4578:1997 | Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method |
| BS ISO 3342:2011 | Textile glass. Mats. Determination of tensile breaking force |
| EN 17098-2:2018 | Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique |
| UNE-EN 13121-3:2017 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| ISO 10406-1:2015 | Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids |
| EN 17098-1:2018 | Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| EN ISO 4612:1999 | Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method (ISO 4612:1999) |
| EN ISO 7391-2:2006 | Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006) |
| ISO 1210:1992 | Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source |
| ISO 4587:2003 | Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
| ISO 21367:2007 | Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens |
| ISO 8605:2001 | Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification |
| ISO/TR 5659-3:1999 | Plastics Smoke generation Part 3: Determination of optical density by a dynamic-flow method |
| EN ISO 846:1997 | Plastics - Evaluation of the action of microorganisms (ISO 846:1997) |
| ISO 871:2006 | Plastics Determination of ignition temperature using a hot-air furnace |
| ISO 10406-2:2015 | Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets |
| ISO 17557:2003 | Plastics — Film and sheeting — Cast polypropylene (PP) films |
| I.S. EN ISO 8986-2:2009 | PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 60464-2:2002 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| ISO 22621-3:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 3: Fittings |
| ISO 5657:1997 | Reaction to fire tests Ignitability of building products using a radiant heat source |
| ISO 4606:1995 | Textile glass Woven fabric Determination of tensile breaking force and elongation at break by the strip method |
| ONORM EN ISO 527-1 : 2012 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
| UNE-EN 15860:2011 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| I.S. EN 59:2016 | GLASS REINFORCED PLASTICS - DETERMINATION OF INDENTATION HARDNES BY MEANS OF A BARCOL HARDNESS TESTER |
| IEC 62631-2-1:2018 | Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical Frequencies (0,1 Hz - 10 MHz) - AC Methods |
| I.S. EN ISO 4612:1999 | PLASTICS - PREPARATION OF PVC PASTES FOR TEST PURPOSES - PLANETARY-MIXER METHOD |
| DIN EN ISO 22088-4:2006-11 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006) |
| DIN EN 12586:2011-04 | Child use and care articles - Soother holder - Safety requirements and test methods (includes Amendment A1:2011) |
| EN 60695-2-13:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014) |
| DIN EN 1966:2009-07 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| DIN EN ISO 13468-2:2006-07 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
| DIN EN ISO 8256:2005-05 | Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004 |
| DIN EN ISO 1889:2009-10 | REINFORCEMENT YARNS - DETERMINATION OF LINEAR DENSITY |
| DIN EN ISO 13927:2015-08 | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015) |
| DIN EN 1264-4:2009-11 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| DIN EN ISO 11403-3:2014-09 | Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014) |
| DIN EN ISO 1890:2009-10 | REINFORCEMENT YARNS - DETERMINATION OF TWIST |
| BS EN 14869-1:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Torsion test method using butt-bonded hollow cylinders |
| ISO 8580:1987 | Rubber and plastics hoses Determination of ultra-violet resistance under static conditions |
| UNE-EN ISO 306:2015 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
| BS EN ISO 12086-2:2006 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| ISO 1135-5:2015 | Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus |
| UNE-EN ISO 75-1:2013 | Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013) |
| ISO 13274:2013 | Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs |
| ISO 11468:1997 | Plastics — Preparation of PVC pastes for test purposes — Dissolver method |
| DIN EN ISO 180:2013-08 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000 + AMD.1:2006 + AMD.2:2013) |
| UNI EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| BS EN ISO 6603-1:2000 | Plastics. Determination of multi-axial impact behaviour of rigid plastics Non-instrumented impact testing |
| BS EN ISO 8256:2004 | Plastics. Determination of tensile-impact strength |
| BS EN ISO 75-1:2013 | Plastics. Determination of temperature of deflection under load General test method |
| BS EN 13592:2017 | Plastics sacks for household waste collection. Types, requirements and test methods |
| IEC 60216-8:2013 | Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures |
| ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
| BS EN 13421:2006 | Plastics. Thermoset moulding compounds. Composites and reinforcement fibres. Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
| ISO 13445:2003 | Adhesives Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method |
| 12/30260914 DC : 0 | BS EN 4718 - AEROSPACE SERIES - POLYETHERKETONE WITH 55% CONTINUOUS GLASS FIBRE BY VOLUME (PEEK-GF55) |
| PD IEC/TS 62788-2:2017 | Measurement procedures for materials used in photovoltaic modules Polymeric materials. Frontsheets and backsheets |
| BS EN ISO 1135-4:2015 | Transfusion equipment for medical use Transfusion sets for single use, gravity feed |
| BS EN 1389:2003 | Advanced technical ceramics. Ceramic composites. Physical properties. Determination of density and apparent porosity |
| ISO 1163-2:1995 | Plastics Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 176:2005 | Plastics. Determination of loss of plasticizers. Activated carbon method |
| BS EN ISO 6383-2:2004 | Plastics. Film and sheeting. Determination of tear resistance Elmendorf method |
| UNE-EN ISO 11403-2:2012 | Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012) |
| BS EN 15336:2007 | Adhesives. Determination of the time to rupture of bonded joints under static load |
| BS EN ISO 11403-2:2012 | Plastics. Acquisition and presentation of comparable multipoint data Thermal and processing properties |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| ISO 2898-2:2008 | Plastics Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 877:1994 | Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
| UNE-EN ISO 11833-1:2012 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012) |
| BS EN 1264-4:2009 | Water based surface embedded heating and cooling systems Installation |
| BS EN ISO 10350-2:2011 | Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| UNI EN ISO 180 : 2013 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH |
| EN ISO 10350-2:2011 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
| UNI EN ISO 10350-2 : 2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| UNI EN ISO 10352 : 2011 | FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA |
| I.S. EN ISO 10352:2010 | FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA |
| UNI EN ISO 75-1 : 2013 | PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD |
| UNE-EN ISO 11963:2013 | Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012) |
| EN ISO 10352:2010 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010) |
| UNE-EN ISO 1874-2:2013 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012) |
| ONORM EN ISO 10350-2 : 2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| EN ISO 14663-2:2006 | Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999) |
| I.S. EN ISO 10350-2:2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| EN ISO 1890:2009 | Reinforcement yarns - Determination of twist (ISO 1890:2009) |
| EN ISO 29664:2017 | Plastics - Artificial weathering including acidic deposition (ISO 29664:2010) |
| EN ISO 9988-2:2015 | Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006) |
| EN 14118-3:2003 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements |
| EN ISO 21509:2015 | Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006) |
| EN 16245-2:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| EN ISO 2039-1:2003 | Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001) |
| EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| UNI EN ISO 14125 : 2011 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| UNI EN ISO 1874-2 : 2013 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ONORM EN ISO 11339 : 2010 | ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| BS EN ISO 177:2017 | Plastics. Determination of migration of plasticizers |
| UNI EN 1465 : 2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH BONDED ASSEMBLIES |
| UNI EN 14869-2 : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| UNI EN 14869-1 : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| I.S. EN ISO 3146:2000 | PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS |
| UNI EN ISO 11403-2 : 2012 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES |
| UNI EN 16245-2 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| ONORM EN ISO 11358-1 : 2014 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014) |
| UNI EN ISO 11963 : 2013 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| UNI EN 28510-1 : 2014 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| UNI EN ISO 7792-2 : 2013 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN ISO 2898-2 : 2009 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 14125:1998 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| I.S. EN ISO 9773:1998 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR OF THIN FLEXIBLE VERTICAL SPECIMENS IN CONTACT WITH A SMALL-FLAME IGNITION SOURCE |
| UNI EN ISO 1890 : 2009 | REINFORCEMENT YARNS - DETERMINATION OF TWIST |
| I.S. EN ISO 14126:2000 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
| UNI EN ISO 4651 : 2009 | CELLULAR RUBBERS AND PLASTICS - DETERMINATION OF DYNAMIC CUSHIONING PERFORMANCE |
| BS 2782-3.335A(1993) : AMD 8638 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF FLEXURAL PROPERTIES |
| UNI EN 12586 : 2011 | CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 604 : 2008 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| UNI EN ISO 175 : 2010 | PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS |
| UNI EN ISO 306 : 2014 | PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) |
| UNI EN ISO 527-1 : 2012 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES |
| UNI EN ISO 1889 : 2009 | REINFORCEMENT YARNS - DETERMINATION OF LINEAR DENSITY |
| UNI EN 1965-2 : 2011 | STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| UNI EN 1966 : 2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| UNI EN ISO 8986-2 : 2010 | PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN 14879-6 : 2010 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| UNI EN ISO 179-1 : 2010 | PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST |
| UNI EN ISO 845 : 2009 | CELLULAR PLASTICS AND RUBBERS - DETERMINATION OF APPARENT DENSITY |
| BS 1755-1:1982 | Glossary of terms used in the plastics industry Polymer and plastics technology |
| UNI EN 1464 : 2010 | ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD |
| UNI EN ISO 12086-2 : 2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISO 3597-1:2003 | Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods |
| NF EN ISO 178 : 2011 AMD 1 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| AFAP-5 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - HEAT RELEASE RATE |
| BS 2782-1:Method 140A:1992 | Methods of testing plastics. Thermal properties Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source |
| DIN EN 15836-2:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| UNI EN ISO 1183-1 : 2013 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD |
| ISO 2113:1996 | Reinforcement fibres — Woven fabrics — Basis for a specification |
| BS ISO 19095-1:2015 | Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies Guidelines for the approach |
| DD IEC/TS 60695-2-20:2004 | Fire hazard testing Glowing/hot wire based test methods - Hot-wire coil ignitability. Apparatus, test method and guidance |
| IEC 62899-402-1:2017 | Printed electronics - Part 402-1: Printability - Measurement of qualities - Pattern width |
| BS ISO 3374:2000 | Reinforcement products. Mats and fabrics. Determination of mass per unit area |
| BS 2782-8.832A(1991) : 1991 AMD 9463 | METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) BY THE BENT STRIP METHOD |
| ISO 178:2010 | Plastics Determination of flexural properties |
| 96/125176 DC : DRAFT SEP 96 | ISO/CD 15024 DETERMINATION OF THE MODE 1 DELAMINATION RESISTANCE (CRITICAL STRAIN ENERGY RELEASE RATE OR FRACTURE TOUGHNESS G[LC]) OF UNIDIRECTIONAL FIBRE-REINFORCED POLYMER LAMINATES USING THE DOUBLE CANTILEVER BEAM (DCB) SPECIMEN |
| BS ISO 11566:1996 | Carbon fibre. Determination of the tensile properties of single-filament specimens |
| 14/30303794 DC : 0 | BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| 13/30279113 DC : 0 | BS ISO 16012 - PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS |
| BS ISO 17557:2003 | Plastics. Film and sheeting. Cast polypropylene (PP) films |
| 11/30248330 DC : 0 | BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL |
| 08/30184486 DC : DRAFT JUNE 2008 | BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE |
| BS EN 15466-3:2009 | Primers for cold and hot applied joint sealants Determination of solids content and evaporation behaviour of volatiles |
| 09/30206609 DC : 0 | BS EN 60695-11-10 ED.2 - FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS |
| I.S. EN ISO 23667:2007 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - RIGID PLASTICS AND PLASTICS COMPOSITE IBCS - COMPATIBILITY TESTING |
| BS ISO 16616:2015 | Test methods for natural fibre-reinforced plastic composite (NFC) deck boards |
| 12/30254141 DC : 0 | BS EN 15651-4 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| DIN EN ISO 1135-3:2014-12 (Draft) | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
| BS EN ISO 11358-1:2014 | Plastics. Thermogravimetry (TG) of polymers General principles |
| DIN EN 16245-5:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials |
| UNI EN 15836-1 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| PD 6577:1995 | The influence of environmental conditions on the testing of textile materials |
| UNI EN ISO 30013 : 2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
| 02/121868 DC : DRAFT APR 2002 | BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE |
| ISO 18941:2017 | Imaging materials Colour reflection prints Test method for ozone gas fading stability |
| 16/30353140 DC : 0 | PD IEC/TS 62788-7-2 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 7-2: ENVIRONMENTAL EXPOSURES - ACCELERATED WEATHERING TESTS OF POLYMERIC MATERIALS |
| PREN 59 : DRAFT 2014 | GLASS REINFORCED PLASTICS - MEASUREMENT OF HARDNESS BY MEANS OF A BARCOL IMPRESSOR |
| BS EN 15836-1:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| I.S. EN ISO 9653:2000 | ADHESIVES - TEST METHOD FOR SHEAR IMPACT STRENGTH OF ADHESIVE BONDS |
| 06/30155368 DC : 0 | PREN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| DIN EN 59:2016-06 | GLASS REINFORCED PLASTICS - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A BARCOL HARDNESS TESTER |
| BS ISO 17555:2003 | Plastics. Film and sheeting. Biaxially oriented polypropylene (PP) films |
| 11/30239986 DC : DRAFT MAR 2011 | BS EN 16245-5 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS |
| PREN 14869-2 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| 04/30092689 DC : DRAFT OCT 2004 | ISO 22088-5 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD |
| 13/30259881 DC : 0 | BS ISO 22007-6 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE |
| 04/30113001 DC : DRAFT APR 2004 | BS ISO 1926 - RIGID CELLULAR PLASTICS - DETERMINATION OF TENSILE PROPERTIES |
| 14/30304003 DC : 0 | BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
| BS EN 15870:2009 | Adhesives. Determination of tensile strength of butt joints |
| I.S. EN ISO 22088-4:2007 | PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD |
| BS EN 16245-2:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers |
| PREN 15651-4 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| ISO 13003:2003 | Fibre-reinforced plastics — Determination of fatigue properties under cyclic loading conditions |
| BS ISO 12000:2014 | Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods |
| ONORM EN ISO 11833-1 : 2012 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
| BS ISO 15014:2007 | Plastics. Extruded sheets of poly(vinylidene fluoride) (PVDF). Requirements and test methods |
| BS EN ISO 11357-3:2013 | Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization |
| BS 2782-3 Method 365C:1986 | Methods of testing plastics. Mechanical properties Determination of Rockwell hardness |
| 11/30246689 DC : 0 | BS EN 60216-8 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES |
| BS ISO 2898-2 : 1997 AMD 10727 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 3597-1:2003 | Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resin General considerations and preparation of rods |
| BS ISO 15114:2014 | Fibre-reinforced plastic composites. Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach |
| BS ISO 22007-6 : 2014 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE |
| CEI EN 62788-1-5 : 1ED 2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS |
| DIN EN 15466-3:2009-10 | Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles |
| 17/30348289 DC : 0 | BS EN 17098-2 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE |
| BS ISO 3343:2010 | Reinforcement yarns. Determination of twist balance index |
| 05/30141298 DC : DRAFT NOV 2005 | ISO 20392 - RIGID CELLULAR PLASTICS - DETERMINATION OF COMPRESSIVE CREEP |
| 07/30165535 DC : 0 | BS ISO 10406-2 - FIBRE-REINFORCED POLYMER (FRP) REINFORCEMENT OF CONCRETE - TEST METHODS - PART 2: FRP SHEETS |
| DIN EN ISO 11358-1:2014-10 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| BS ISO 11359-3:2002 | Plastics. Thermomechanical analysis (TMA) Determination of penetration temperature |
| BS ISO 9163 : 1996 AMD 10351 | TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| BS ISO 29664 : 2010 | PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION |
| 15/30321226 DC : 0 | BS EN ISO 20568-2 - PLASTICS - FLUOROPOLYMER DISPERSION AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 15314:2004 | Plastics. Methods for marine exposure |
| UNE-EN 15466-2:2010 | Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali |
| AFAP-3 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - TOXICITY OF FIRE EFFLUENTS |
| 16/30317348 DC : 0 | BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| BS ISO 9352:2012 | Plastics. Determination of resistance to wear by abrasive wheels |
| UNE-EN ISO 11357-2:2015 | Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013) |
| I.S. EN ISO 9988-2:2015 | PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006) |
| 11/30242080 DC : DRAFT MAY 2011 | BS ISO 16486-5 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| ISO 17467-2:2012 | Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 2: Pipes |
| 18/30344274 DC : DRAFT APR 2018 | BS ISO 21475 - PLASTICS - METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION |
| BS ISO 8296:2003 | Plastics. Film and sheeting. Determination of wetting tension |
| 02/564513 DC : DRAFT OCT 2002 | BS EN ISO 1135-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE |
| 11/30239980 DC : DRAFT MAR 2011 | BS EN 16245-3 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| BS 2782-6.643B(1996) : 1996 AMD 15283 | METHODS OF TESTING PLASTICS - DIMENSIONAL PROPERTIES - DETERMINATION OF DIMENSIONAL CHANGE ON HEATING OF FILM AND SHEETING |
| BS EN 62788-1-6:2017 | Measurement procedures for materials used in photovoltaic modules Encapsulants. Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
| 05/30128281 DC : DRAFT JAN 2005 | ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS 2782-7 Method 730B:1978 | Methods of testing plastics. Rheological properties Determination of the viscosity of polymers in the liquid, emulsified or dispersed state using a rotational viscometer working at a defined shear rate |
| BS EN 62878-1-1:2015 | Device embedded substrate Generic specification. Test methods |
| 16/30328584 DC : 0 | BS ISO 19699-1 - PLASTICS - SUPERABSORBENT POLYMER - SODIUM POLYACRYLATE RESIN FOR ABSORBING BLOOD - PART 1: TEST METHODS |
| 12/30254694 DC : DRAFT MAR 2012 | BS ISO 16525-8 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 8: ELECTROCHEMICAL-MIGRATION TEST METHODS |
| UNI EN 13696 : 2009 | WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
| 00/121284 DC : DRAFT MAR 2000 | PREN 13864 - SURFACES FOR SPORTS AREAS - DETERMINATION OF TENSILE STRENGTH OF SYNTHETIC YARNS |
| BS ISO 12815:2013 | Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength |
| BS 7825-3.3:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of plastics |
| DIN EN ISO 9988-2:2015-05 | PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006) |
| 12/30254682 DC : DRAFT MAR 2012 | BS ISO 16525-4 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 4: DETERMINATION OF SHEAR STRENGTH AND ELECTRICAL RESISTANCE USING RIGID-TO-RIGID BONDED ASSEMBLIES |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| BS ISO 14910-2 : 1997 AMD 16024 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 17/30350545 DC : 0 | BS EN ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION |
| BS 2782-1.120A,B,D,E(1990) : LATEST | METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - METHODS 120A, B, D AND E - DETERMINATION OF VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS |
| 16/30323587 DC : DRAFT JAN 2016 | BS EN ISO 5659-2 - PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST |
| 12/30263544 DC : 0 | BS EN 60216-1 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| PD ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace |
| UNE-EN 16245-4:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics |
| ISO 7765-2:1994 | Plastics film and sheeting Determination of impact resistance by the free-falling dart method Part 2: Instrumented puncture test |
| BS ISO 13003:2003 | Fibre-reinforced plastics. Determination of fatigue properties under cyclic loading conditions |
| BS ISO/TR 5659-3:1999 | Plastics. Smoke generation Determination of optical density by a dynamic flow method |
| 08/30181781 DC : DRAFT JULY 2008 | BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| BS EN 62788-1-5:2016 | Measurement procedures for materials used in photovoltaic modules Encapsulants. Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions |
| I.S. EN 60455-3-8:2013 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV)) |
| ISO 16486-1:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 1: General |
| 11/30248333 DC : 0 | BS ISO 17467-2 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 2: PIPES |
| 06/30134641 DC : DRAFT MAR 2006 | ISO 19252 - PLASTICS - DETERMINATION OF SCRATCH PROPERTIES |
| BS EN ISO 877-1:2010 | Plastics. Methods of exposure to solar radiation General guidance |
| BS ISO 14663-2 : 1999 AMD 16029 | PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 7792-2 : 1997 AMD 15252 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 12/30215688 DC : 0 | BS ISO 15114 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF THE MODE 2 FRACTURE RESISTANCE FOR UNIDIRECTIONALLY REINFORCED MATERIALS USING THE CALIBRATED END-LOADED SPLIT (C-ELS) TEST AND AN EFFECTIVE CRACK LENGTH APPROACH |
| BS ISO 16790:2005 | Plastics. Determination of drawing characteristics of thermoplastics in the molten state |
| BS ISO/IEC 15457-3:2008 | Identification cards. Thin flexible cards Test methods |
| 11/30234454 DC : 0 | BS EN ISO 6721-1 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| BS ISO 2558:2010 | Textile glass chopped-strand mats for reinforcement of plastics. Determination of time of dissolution of the binder in styrene |
| 12/30242496 DC : DRAFT MAR 2012 | BS ISO 16525-1 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 1: GENERAL TEST METHODS |
| 08/30181778 DC : DRAFT JULY 2008 | BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| UNE-EN 16245-5:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials |
| BS 2782-8 Method 830A:1986 | Methods of testing plastics. Other properties Determination of the effects of liquid chemicals, including water |
| 15/30309530 DC : 0 | BS EN 62788-1-6 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE ENCAPSULATION FOR PHOTOVOLTAIC MODULES |
| BS ISO 3375:2009 | Textile glass. Determination of stiffness of rovings |
| 10/30210321 DC : 0 | BS ISO 18944 - IMAGING MATERIALS - REFLECTION COLOUR PHOTOGRAPHIC PRINTS - TEST PRINT CONSTRUCTION AND MEASUREMENT |
| ISO 1183-2:2004 | Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
| 07/30165530 DC : 0 | BS ISO 10406-1 - FIBRE-REINFORCED POLYMER (FRP) REINFORCEMENT OF CONCRETE - TEST METHODS - PART 1: FRP BARS AND GRIDS |
| BS IEC 62899-402-1:2017 | Printed electronics Printability. Measurement of qualities. Pattern width |
| 03/118818 DC : DRAFT DEC 2003 | BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 17/30335677 DC : 0 | BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| EN ISO 13468-2:2006 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
| UNE-EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
| ISO 15527:2010 | Plastics Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) Requirements and test methods |
| I.S. EN ISO 14632:1999 | EXTRUDED SHEETS OF POLYETHYLENE (PE-HD) - REQUIREMENTS AND TEST METHODS |
| NF ISO 3598 : 2011 | TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION |
| 04/30078970 DC : DRAFT OCT 2004 | ISO 22088-1 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 1: GENERAL GUIDANCE |
| 05/30131970 DC : DRAFT APR 2005 | EN ISO 7214 - CELLULAR PLASTICS - POLYETHYLENE - METHODS OF TEST |
| 09/30203717 DC : 0 | BS ISO 4603:1993+AMD1 - TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS |
| BS EN ISO 6721-1:2011 | Plastics. Determination of dynamic mechanical properties General principles |
| ASTM D 5935 : 1996 | Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998) |
| BS ISO 974:2000 | Plastics. Determination of the brittleness temperature by impact |
| UNI EN 15865 : 2009 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| BS EN 60695-11-20:2015 | Fire hazard testing Test flames. 500 W flame test methods |
| 06/30146373 DC : DRAFT SEP 2006 | ISO 22621-3 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 20 BAR - POLYAMIDE (PA) - PART 3: FITTINGS |
| ISO 13586:2000 | Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach |
| ISO 4577:1983 | Plastics Polypropylene and propylene-copolymers Determination of thermal oxidative stability in air Oven method |
| UNI EN 1264-4 : 2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| DIN EN ISO 15527:2013-05 | PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010) |
| ISO 16525-4:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies |
| BS EN ISO 29664:2017 | Plastics. Artificial weathering including acidic deposition |
| BS ISO 16869:2001 | Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations |
| 16/30341219 DC : 0 | BS EN 17022 - CHILD CARE ARTICLES - BATHING AIDS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 62326-20:2016 | PRINTED BOARDS - PART 20: PRINTED CIRCUIT BOARDS FOR HIGHBRIGHTNESS LEDS |
| BS ISO 12086-2 : 2001 AMD 10637 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS |
| 17/30346164 DC : 0 | BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
| UNE-EN ISO 8510-2:2011 | Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. Part 2: 180 degree peel (ISO 8510-2:2006) |
| I.S. EN 16776:2016 | RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION |
| BS EN 50655-1:2017 | Electric cables. Accessories. Material characterization Fingerprinting for resinous compounds |
| UNE-EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
| I.S. EN 14879-6:2009 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| I.S. EN 17098-1:2018 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS |
| I.S. EN 60216-8:2013 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES (IEC 60216-8:2013 (EQV)) |
| I.S. EN ISO 11358-1:2014 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014) |
| ISO/TS 19392-2:2018 | Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 2: Determination and evaluation of resistance to rain erosion using rotating arm |
| ISO 3343:2010 | Reinforcement yarns Determination of twist balance index |
| ISO 19699-1:2017 | Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods |
| I.S. EN 60216-1:2013 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS (IEC 60216-1:2013 (EQV)) |
| UNE-EN ISO 16396-2:2017 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| ISO 16486-5:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 5: Fitness for purpose of the system |
| BIS IS 8504-1 : 2012 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| I.S. EN 16245-3:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| I.S. EN ISO 1135-3:2017 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
| BS IEC 62899-201 : 2016 | PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
| DIN EN ISO 1183-2:2004-10 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD |
| NF EN ISO 877-1 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| BS ISO 3616 : 2001 | TEXTILE GLASS - CHOPPED-STRAND AND CONTINUOUS-FILAMENT MATS - DETERMINATION OF AVERAGE THICKNESS, THICKNESS UNDER LOAD AND RECOVERY AFTER COMPRESSION |
| ISO 18188:2016 | Specification of polypropylene drinking straws |
| I.S. EN 60695-11-10:2013 | FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS (IEC 60695-11-10:2013 (EQV)) |
| I.S. EN 17098-2:2018 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE |
| I.S. EN 438-2:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| ISO 12815:2013 | Fibre-reinforced plastic composites — Determination of plain-pin bearing strength |
| DIN EN ISO 29664:2016-09 (Draft) | PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010) |
| I.S. EN ISO 11357-3:2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2018) |
| BS EN ISO 1183-2:2004 | Plastics. Methods for determining the density of non-cellular plastics Density gradient column method |
| ISO 11359-3:2002 | Plastics Thermomechanical analysis (TMA) Part 3: Determination of penetration temperature |
| EN ISO 2507-1:2017 | Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995) |
| DIN EN ISO 20028-2:2015-08 (Draft) | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
| ISO 8873-1:2006 | Rigid cellular plastics — Spray-applied polyurethane foam for thermal insulation — Part 1: Material specifications |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| NF ISO 4603 : 1996 AMD 1 2011 | TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| AFAP-4 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - SURFACE SPREAD OF FLAME |
| PREN ISO 11833-1 : DRAFT 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
| I.S. EN 15865:2009 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| ISO 15850:2014 | Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach |
| I.S. EN 13696:2009 | WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
| EN ISO 15527:2013 | Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010) |
| BS EN 17098-1:2018 | Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films |
| DIN EN ISO 6721-1:2011-08 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| PREN 1794-3 : DRAFT 2014 | ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 3: REACTION TO FIRE - BURNING BEHAVIOUR OF NOISE REDUCING DEVICES AND CLASSIFICATION |
| CEI EN 60216-1 : 2014 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| BS EN ISO 1183-1:2012 | Plastics. Methods for determining the density of non-cellular plastics Immersion method, liquid pyknometer method and titration method |
| PREN 14903 : DRAFT 2015 | SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - DETERMINATION OF ROTATIONAL FRICTION |
| I.S. EN ISO 22007-6:2015 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
| ISO 5660-4:2008 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 4: Measurement of heat release for determination of low levels of combustibility |
| ONORM EN ISO 11502 : 2005 | PLASTICS - FILM AND SHEETING - DETERMINATION OF BLOCKING RESISTANCE |
| ISO 6721-12:2009 | Plastics Determination of dynamic mechanical properties Part 12: Compressive vibration Non-resonance method |
| EN ISO 1110:1997 | Plastics - Polyamides - Accelerated conditioning of test specimens (ISO 1110:1995) |
| UNE-EN ISO 472:2015 | Plastics - Vocabulary (ISO 472:2013) |
| ISO 19095-1:2015 | Plastics Evaluation of the adhesion interface performance in plastic-metal assemblies Part 1: Guidelines for the approach |
| ISO 16486-2:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 2: Pipes |
| ISO 15439-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 1: General |
| ISO 6721-1:2011 | Plastics Determination of dynamic mechanical properties Part 1: General principles |
| ISO 17223:2014 | Plastics — Determination of yellowness index and change in yellowness index |
| ISO 16790:2005 | Plastics Determination of drawing characteristics of thermoplastics in the molten state |
| ISO 15024:2001 | Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials |
| I.S. EN ISO 1183-1:2012 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| ISO 6238:2001 | Adhesives Wood-to-wood adhesive bonds Determination of shear strength by compressive loading |
| IEC TS 60695-11-11:2016 | Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source |
| ISO/TR 18930:2001 | Imaging materials Protocols for outdoor weathering experiments |
| ISO 4900:2011 | Textile glass Mats and fabrics Determination of contact mouldability |
| ISO 13106:2014 | Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffs |
| ISO 10120:1991 | Carbon fibre — Determination of linear density |
| IEC TS 60695-11-21:2005 | Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials |
| ISO/IEC 15457-3:2008 | Identification cards — Thin flexible cards — Part 3: Test methods |
| ISO 846:1997 | Plastics Evaluation of the action of microorganisms |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| DIN EN ISO 75-1:2013-08 | PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013) |
| UNI EN ISO 11403-3 : 2014 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES |
| ISO 22621-2:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 2: Pipes |
| ISO 15509:2001 | Adhesives Determination of the bond strength of engineering-plastic joints |
| ISO 17281:2002 | Plastics Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s) |
| I.S. EN 62878-1-1:2015 | DEVICE EMBEDDED SUBSTRATE - PART 1-1: GENERIC SPECIFICATION - TEST METHODS |
| ISO 899-1:2017 | Plastics — Determination of creep behaviour — Part 1: Tensile creep |
| UNE-EN ISO 13927:2016 | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015) |
| I.S. EN ISO 8536-4:2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010) |
| BS EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| ISO 11357-2:2013 | Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
| DIN EN ISO 7823-1:2003-12 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| DIN EN ISO 14125:2011-05 | Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor 1:2001 + Amd 1:2011) |
| DIN EN ISO 14130:1998-02 | FIBRE REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD |
| DIN EN ISO 4892-1:2016-10 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| DIN EN ISO 7823-3:2007-08 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| UNE-EN ISO 7792-2:2013 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012) |
| DIN EN ISO 11542-2:2010-01 | Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008) |
| DIN EN 1965-2:2011-07 | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
| DIN EN ISO 8536-4:2013-07 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013) |
| DIN EN ISO 7823-2:2003-12 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS |
| ISO 9054:1990 | Cellular plastics, rigid — Test methods for self-skinned, high-density materials |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| UNE-EN ISO 1135-4:2016 | Transfusion equipment for medical use - Part 4: Transfusion sets for single use, gravity feed (ISO 1135-4:2015) |
| BS EN ISO 2039-1:2003 | Plastics. Determination of hardness Ball indentation method |
| 11/30242263 DC : 0 | BS EN 4691-001 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - TECHNICAL SPECIFICATION |
| BS EN ISO 14529-2:2000 | Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties |
| BS EN ISO 14126:1999 | Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction |
| UNE-EN ISO 179-1:2011 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| BS EN ISO 9163:2005 | Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| BS EN ISO 11358:1997 | Plastics. Thermogravimetry (TG) of polymers. General principles |
| BS EN ISO 12017:1996 | Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods |
| BS EN 12960:2001 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of shear resistance |
| BS EN ISO 22088-4:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC) Ball or pin impression method |
| ISO 176:2005 | Plastics — Determination of loss of plasticizers — Activated carbon method |
| BS EN ISO 2578:1999 | Plastics. Determination of the time-temperature limits after prolonged exposure to heat |
| BS EN 1464:2010 | Adhesives. Determination of peel resistance of adhesive bonds. Floating roller method |
| ISO 11358-1:2014 | Plastics Thermogravimetry (TG) of polymers Part 1: General principles |
| BS EN ISO 11339:2010 | Adhesives. T-peel test for flexible-to-flexible bonded assemblies |
| ONORM EN ISO 180 : 2013 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000 + AMD. 1:2006 + AMD. 2:2013) |
| BS EN ISO 4589-2:2017 | Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test |
| ISO 6252:1992 | Plastics Determination of environmental stress cracking (ESC) Constant-tensile-stress method |
| DIN EN ISO 604:2003-12 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| BS EN 12654-1:1999 | Textile glass. Yarns Designation |
| ISO 11667:1997 | Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods |
| ISO 23667:2007 | Packaging Transport packaging for dangerous goods Rigid plastics and plastics composite IBCs Compatibility testing |
| ISO 13927:2015 | Plastics — Simple heat release test using a conical radiant heater and a thermopile detector |
| ISO 14528-2:1999 | Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 1135-3:2016 | Transfusion equipment for medical use Part 3: Blood-taking sets for single use |
| BS EN 1400-2:2002 | Child use and care articles. Soothers for babies and young children Mechanical requirements and tests |
| ISO 2578:1993 | Plastics Determination of time-temperature limits after prolonged exposure to heat |
| I.S. EN ISO 11343:2005 | ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH-STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| ISO 489:1999 | Plastics Determination of refractive index |
| ISO 11403-3:2014 | Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties |
| ISO 13468-2:1999 | Plastics Determination of the total luminous transmittance of transparent materials Part 2: Double-beam instrument |
| BS EN ISO 489:1999 | Plastics. Determination of refractive index |
| ISO 2039-2:1987 | Plastics — Determination of hardness — Part 2: Rockwell hardness |
| BS EN 12654-2:1999 | Textile glass. Yarns Methods of test and general specifications |
| ISO 20028-2:2017 | Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| ISO 179:1993 | Plastics Determination of Charpy impact strength |
| BS EN 1007-2:2002 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of linear density |
| ISO 4613-2:1995 | Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 11357-1:2016 | Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles |
| BS EN 29142:1993 | Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| UNE-EN 1264-4:2010 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| BS EN ISO 3672-2:2001 | Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties |
| BS EN 1842:1997 | Plastics. Thermoset moulding compounds (SMC-BMC). Determination of compression moulding shrinkage |
| BS EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
| BS EN 12365-4:2003 | Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling Recovery after accelerated ageing test method |
| BS EN 12943:2000 | Filler materials for thermoplastics. Scope, designation, requirements, tests |
| BS EN ISO 899-2 : 2003 | PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING |
| ISO 1874-2:2012 | Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 4892-1:2016 | Plastics. Methods of exposure to laboratory light sources General guidance |
| IEC 62631-1:2011 | Dielectric and resistive properties of solid insulating materials - Part 1: General |
| BS EN ISO 1889:2009 | Reinforcement yarns. Determination of linear density |
| ISO 14129:1997 | Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| ISO 1135-4:2015 | Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed |
| ISO 9773:1998 | Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source |
| BS EN 14565:2004 | Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification |
| UNE-EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
| ISO 11833-2:1998 | Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 2: Sheets of thickness less than 1 mm |
| IEC 60464-2:2001+AMD1:2006 CSV | Varnishes used for electrical insulation - Part 2: Methods of test |
| ISO 7765-1:1988 | Plastics film and sheeting Determination of impact resistance by the free-falling dart method Part 1: Staircase methods |
| UNE-EN ISO 11855-5:2016 | Building environment design - Design , dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2012) |
| ISO 11855-5:2012 | Building environment design Design , dimensioning, installation and control of embedded radiant heating and cooling systems Part 5: Installation |
| ISO 20568-2:2017 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| IEC 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| ISO 14530-2:1999 | Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 13445:2006 | Adhesives. Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| BS EN ISO 7823-2:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets |
| ISO 877-1:2009 | Plastics — Methods of exposure to solar radiation — Part 1: General guidance |
| ISO 2039-1:2001 | Plastics — Determination of hardness — Part 1: Ball indentation method |
| ISO 4600:1992 | Plastics Determination of environmental stress cracking (ESC) Ball or pin impression method |
| ISO 177:2016 | Plastics Determination of migration of plasticizers |
| UNE-EN 13592:2017 | Plastics sacks for household waste collection - Types, requirements and test methods |
| BS EN ISO 15013:1999 | Extruded sheets of polypropylene (PP). Requirements and test methods |
| ISO 4894-2:1995 | Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 11403-2:2012 | Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties |
| ISO 11501:1995 | Plastics Film and sheeting Determination of dimensional change on heating |
| IEC TS 62788-2:2017 | Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials - Frontsheets and backsheets |
| UNE-EN ISO 10350-2:2011 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
| ISO 3344:1997 | Reinforcement products — Determination of moisture content |
| BS EN ISO 306:2013 | Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST) |
| ISO 12086-2:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 10352:2010 | Fibre-reinforced plastics Moulding compounds and prepregs Determination of mass per unit area |
| ISO 3672-2:2000 | Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties |
| UNE-EN ISO 5659-2:2018 | Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017) |
| ISO 22007-6:2014 | Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique |
| BS EN ISO 9664:1995 | Adhesives. Test methods for fatigue properties of structural adhesives in tensile shear |
| ISO 845:2006 | Cellular plastics and rubbers — Determination of apparent density |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| BS EN ISO 2039-2:2000 | Determination of Rockwell hardness. Rockwell hardness Rockwell hardness |
| IEC 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| ISO 7823-1:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
| ISO 9664:1993 | Adhesives Test methods for fatigue properties of structural adhesives in tensile shear |
| BS EN ISO 14527-2:2000 | Preparation of test specimens and determination of properties |
| ISO 7792-2:2012 | Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 483:2005 | Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value |
| ISO 10618:2004 | Carbon fibre — Determination of tensile properties of resin-impregnated yarn |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| EN ISO 75-1:2013 | Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013) |
| BS EN ISO 7823-1:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets |
| ISO 14130:1997 | Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
| ISO 16396-2:2017 | Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 10350:1993 | Plastics Acquisition and presentation of comparable single-point data |
| IEC 60695-11-20:2015 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
| ISO 8536-4:2010 | Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed |
| ISO 3375:2009 | Textile glass Determination of stiffness of rovings |
| BS EN 14598-3:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements |
| ISO 6603-1:2000 | Plastics Determination of puncture impact behaviour of rigid plastics Part 1: Non-instrumented impact testing |
| ISO 9653:1998 | Adhesives Test method for shear impact strength of adhesive bonds |
| ISO 1890:2009 | Reinforcement yarns Determination of twist |
| ISO 1622-2:1995 | Plastics Polystyrene (PS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 12017:1995 | Plastics Poly(methyl methacrylate) double- and triple-skin sheets Test methods |
| BS EN ISO 11833-1:2012 | Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness not less than 1 mm |
| UNE-EN ISO 13274:2014 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013) |
| ONORM EN ISO 75-1 : 2013 | PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013) |
| IEC 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| UNE-EN ISO 14125:1999 | FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998) |
| I.S. EN ISO 75-1:2013 | PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013) |
| ISO 9142:2003 | Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| ISO 11542-2:1998 | Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 25137-2:2009 | Plastics Sulfone polymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| BS EN ISO 11357-1:2016 | Plastics. Differential scanning calorimetry (DSC) General principles |
| ISO 14526-2:1999 | Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 8986-2:2009 | Plastics Polybutene-1 (PB-1) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN 1966:2009 | Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method |
| ISO 4599:1986 | Plastics Determination of resistance to environmental stress cracking (ESC) Bent strip method |
| ISO 7822:1990 | Textile glass reinforced plastics — Determination of void content — Loss on ignition, mechanical disintegration and statistical counting methods |
| ISO 9988-2:2006 | Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| UNE-EN ISO 3344:1998 | REINFORCEMENT PRODUCTS. DETERMINATION OF MOISTURE CONTENT. (ISO 3344:1997). |
| BS EN ISO 9054:1999 | Cellular plastics, rigid. Test methods for self-skinned high-density materials |
| BS EN ISO 10352:2010 | Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area |
| BS EN ISO 179-1:2010 | Plastics. Determination of Charpy impact properties Non-instrumented impact test |
| BS EN ISO 13927:2015 | Plastics. Simple heat release test using a conical radiant heater and a thermopile detector |
| ISO 14126:1999 | Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
| UNE-EN ISO 11403-3:2014 | Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014) |
| EN ISO 11357-2:2014 | Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013) |
| ISO 4651:1988 | Cellular rubbers and plastics — Determination of dynamic cushioning performance |
| BS EN ISO 7822:1999 | Textile glass reinforced plastics. Determination of void content. Loss on ignition, mechanical disintegration and statistical counting methods |
| BS EN ISO 11501:2004 | Plastics. Film and sheeting. Determination of dimensional change on heating Determination of dimensional change on heating of film and sheeting |
| BS EN ISO 10964:1997 | Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners |
| UNE-EN 60695-11-20:2016 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods |
| BS EN ISO 14663-2:2006 | Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties |
| UNE-EN ISO 6383-1:2016 | Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015) |
| 12/30260913 DC : 0 | BS EN 4717 - AEROSPACE SERIES - POLYETHERKETONE WITH 55% CONTINUOUS CARBON FIBRE BY VOLUME (PEEK-CF55) |
| UNE-EN 60695-11-10:2014 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| UNE-EN 12586:2008 | Child use and care articles - Soother holder - Safety requirements and test methods |
| UNE-EN ISO 11357-1:2017 | Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) |
| BS EN ISO 11667:2000 | Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods |
| BS EN ISO 14526-2:2000 | Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties |
| BS EN 4691-1:2017 | Aerospace series. Tie rod with integrated bolts Technical specification |
| ISO 899-2:2003 | Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading |
| BS EN ISO 6383-1:2015 | Plastics. Film and sheeting. Determination of tear resistance Trouser tear method |
| UNE-EN ISO 4892-1:2017 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| UNE-EN ISO 845:2010 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
| ISO 22088-4:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method |
| BS EN ISO 4651 : 1995 | CELLULAR RUBBERS AND PLASTICS - DETERMINATION OF DYNAMIC CUSHIONING PERFORMANCE |
| EN ISO 10618:2004 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004) |
| EN 14447:2005 | Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification |
| EN ISO 11403-2:2012 | Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012) |
| EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| EN ISO 1163-2:1999 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995) |
| EN ISO 2898-2:2008 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008) |
| EN 1794-3:2016 | Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification |
| EN ISO 9664:1995 | Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993) |
| EN ISO 15252-2:1999 | Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999) |
| NF EN ISO 11339 : 2010 | ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| EN 16245-3:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| ONORM EN ISO 13468-2 : 2006 | PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT |
| EN ISO 1135-3:2017 | Transfusion equipment for medical use - Part 3: Blood-taking sets for single use (ISO 1135-3:2016) |
| EN ISO 8986-2:2009 | Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009) |
| EN ISO 10964 : 1997 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| EN ISO 6252 : 1997 | PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - CONSTANT-TENSILE-STRESS METHOD |
| EN 1400-2:2002 | Child use and care articles - Soothers for babies and young children - Part 2 : Mechanical requirements and tests |
| EN ISO 15526-2:2004 | Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000) |
| EN ISO 4599 : 1996 | PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - BENT STRIP METHOD |
| EN 13696:2008 | Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance |
| EN 16153:2013+A1:2015 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN 15466-2:2009 | Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali |
| EN ISO 22007-6:2015 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014) |
| EN ISO 1874-2:2012 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012) |
| EN ISO 2039-2:1999 | Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987) |
| EN 13592:2017 | Plastics sacks for household waste collection - Types, requirements and test methods |
| EN ISO 14529-2:1999 | Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999) |
| EN ISO 15310:2005 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999) |
| EN 1464:2010 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| EN ISO 5659-2:2017 | Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017) |
| EN ISO 3344:1997 | Reinforcement products - Determination of moisture content (ISO 3344:1997) |
| EN ISO 11468:1999 | Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997) |
| EN 14869-2:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| EN ISO 14130:1997 | Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method (ISO 14130:1997) |
| UNI EN ISO 11339 : 2010 | ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO- FLEXIBLE BONDED ASSEMBLIES |
| EN ISO 9163:2005 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005) |
| EN ISO 22088-4:2006 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006) |
| EN ISO 4577:1999 | Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method (ISO 4577:1983) |
| EN 1965-2:2011 | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
| EN ISO 483:2005 | Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005) |
| EN 28031 : 1993 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE |
| EN 16776:2016 | Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| EN ISO 11248:1999 | Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993) |
| EN ISO 8580:1995 | Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987) |
| EN ISO 10350-1:2017 | Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017) |
| EN ISO 9054:1999 | Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990) |
| EN 15336:2007 | Adhesives - Determination of the time to rupture of bonded joints under static load ( ISO 15109:1998 modified) |
| EN ISO 1889:2009 | Reinforcement yarns - Determination of linear density (ISO 1889:2009) |
| EN ISO 16396-2:2017 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| EN ISO 3672-2:2001 | Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000) |
| EN ISO 877:1996 | Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) |
| EN ISO 11833-2:2006 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998) |
| EN ISO 877-1:2010 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| EN ISO 11358-1:2014 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| EN ISO 11358:1997 | Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997) |
| EN 14879-6:2009 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers |
| EN ISO 30013:2011 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| EN ISO 15013:2007 | Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007) |
| EN ISO 14530-2:1999 | Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999) |
| EN ISO 11339:2010 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| EN 1465:2009 | Adhesives - Determination of tensile lap-shear strength of bonded assemblies |
| EN ISO 9142:2003 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) |
| EN 16465:2015 | Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering |
| EN 14415:2004 | Geosynthetic barriers - Test method for determining the resistance to leaching |
| EN ISO 604:2003 | Plastics - Determination of compressive properties (ISO 604:2002) |
| EN 15870:2009 | Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified) |
| EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
| EN ISO 7823-1:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) |
| EN ISO 8256:2004 | Plastics - Determination of tensile-impact strength (ISO 8256:2004) |
| EN ISO 8510-2:2010 | Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006) |
| EN ISO 20028-2:2017 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017) |
| EN ISO 16012:2015 | Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015) |
| EN ISO 6383-1:2015 | Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015) |
| EN ISO 11667:1999 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997) |
| EN ISO 176:2005 | Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005) |
| EN ISO 1622-2:1999 | Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995) |
| EN ISO 20568-2:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
| EN ISO 8295:2004 | Plastics - Film and sheeting - Determination of the coefficients of friction (ISO 8295:1995) |
| EN 16245-5:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials |
| EN ISO 2578:1998 | Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993) |
| EN ISO 306:2013 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
| EN 1842:1997 | Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage |
| EN ISO 489:1999 | Plastics - Determination of refractive index (ISO 489:1999) |
| EN ISO 4894-2:1999 | Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995) |
| EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| EN ISO 14528-2:1999 | Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999) |
| EN 15466-3:2009 | Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 14526-2:1999 | Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999) |
| EN ISO 6603-1:2000 | Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000) |
| EN ISO 4600 : 1997 | PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - BALL OR PIN IMPRESSION METHOD |
| EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
| I.S. EN ISO 489:1999 | PLASTICS - DETERMINATION OF REFRACTIVE INDEX |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| EN ISO 13927:2015 | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015) |
| EN ISO 6383-2:2004 | Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983) |
| EN ISO 6186:1998 | Plastics - Determination of pourability (ISO 6186:1998) |
| EN ISO 11833-1:2012 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012) |
| EN ISO 7823-2:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003) |
| EN ISO 9653:2000 | Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998) |
| EN ISO 13445:2006 | Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003) |
| EN 753-3 : 1999 | IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS |
| EN 14598-3:2005 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| EN 455-4:2009 | Medical gloves for single use - Part 4: Requirements and testing for shelf life determination |
| EN ISO 11343:2005 | Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003) |
| EN ISO 1135-5:2015 | Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2015) |
| EN ISO 14129:1997 | Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45° tension test method (ISO 14129:1997) |
| EN ISO 175:2010 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| EN ISO 11501:2004 | Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995) |
| EN ISO 15015:2011 | Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011) |
| EN ISO 11357-1:2016 | Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) |
| EN 1389:2003 | Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity |
| EN ISO 22007-4:2017 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017) |
| EN ISO 7792-2:2012 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012) |
| EN ISO 13468-1:1996 | Plastics - Determination of total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996) |
| EN ISO 7822:1999 | Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990) |
| EN 16245-4:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics |
| EN 15865:2009 | Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified) |
| EN 1966:2009 | Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
| EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| EN ISO 14527-2:1999 | Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF-MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999) |
| EN 28510-1:2014 | Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90º peel |
| EN ISO 177:2017 | Plastics - Determination of migration of plasticizers (ISO 177:2016) |
| EN ISO 25137-2:2017 | Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009) |
| EN ISO 7765-1:2004 | Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988) |
| UNI EN ISO 15527 : 2013 | PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS |
| 02/121542 DC : DRAFT MAR 2002 | ISO/DIS 11403-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES |
| BS 7658-1:1993 | Carbon fibre Method for determination of density |
| BS EN ISO 11357-2:2014 | Plastics. Differential scanning calorimetry (DSC) Determination of glass transition temperature and glass transition step height |
| BS ISO 15988:2003 | Plastics. Film and sheeting. Biaxially oriented poly(ethylene terephthalate) (PET) films |
| PREN ISO 6721-1 : DRAFT 2011 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| DIN EN 15870:2009-08 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| 13/30238193 DC : DRAFT DEC 2013 | BS ISO 16616 - TEST METHODS FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS |
| BS EN ISO 2818 : 1997 | PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING |
| ISO 17467-1:2012 | Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 1: General |
| 06/30130313 DC : DRAFT MAR 2006 | ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS |
| BS ISO 5660-1:2015 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| BS ISO 16365-2:2014 | Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties |
| PREN 14350-1 : DRAFT 2001 | CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS |
| 17/30348286 DC : 0 | BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS |
| 11/30242077 DC : DRAFT MAY 2011 | BS ISO 16486-3 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 3: FITTINGS |
| UNE-EN 1794-3:2016 | Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification |
| BS EN 62326-20:2016 | Printed boards Printed circuit boards for high-brightness LEDs |
| 05/30130526 DC : DRAFT MAR 2005 | ISO 22621-2 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 2: PIPES |
| I.S. EN ISO 8580:1995 | RUBBER AND PLASTICS HOSES - DETERMINATION OF ULTRA-VIOLET RESISTANCE UNDER STATIC CONDITIONS |
| UNI EN 15466-3 : 2009 | PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 3: DETERMINATION OF SOLIDS CONTENT AND EVAPORATION BEHAVIOUR OF VOLATILES |
| BS EN 1794-3:2016 | Road traffic noise reducing devices. Non-acoustic performance Reaction to fire. Burning behaviour of noise reducing devices and classification |
| 16/30315531 DC : 0 | BS ISO 4582 - PLASTICS - DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN PROPERTIES AFTER EXPOSURE TO DAYLIGHT UNDER GLASS, NATURAL WEATHERING OR LABORATORY LIGHT SOURCES |
| 17/30348730 DC : 0 | BS EN 17072 - CHILD CARE ARTICLES - BATH TUBS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| 14/30298583 DC : 0 | BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| BS EN ISO 1135-3:2017 | Transfusion equipment for medical use Blood-taking sets for single use |
| 03/112821 DC : DRAFT AUG 2003 | ISO 21509 - PLASTICS AND EBONITE - VERIFICATION OF SHORE HARDNESS DUROMETERS |
| BS EN 16245-4:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fabrics |
| 15/30304269 DC : 0 | BS EN 16727-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE UNDER STATIC LOADINGS - CALCULATION AND TEST METHODS |
| UNE-EN ISO 20568-2:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
| 15/30318279 DC : 0 | BS ISO 19322 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR FLOOR COVERINGS BASED ON THERMOPLASTIC POLYMER |
| 06/30130317 DC : DRAFT JULY 2006 | ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| EN 62788-1-5:2016/AC:2017-11 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS (IEC 62788-1-5:2016/COR1:2017) |
| 08/30182090 DC : DRAFT MAY 2008 | BS EN ISO 11357-1 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES |
| I.S. EN ISO 4599:1997 | PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - BENT STRIP METHOD |
| BS ISO 13636:2012 | Plastics. Film and sheeting. Non-oriented poly(ethylene terephthalate) (PET) sheets |
| 15/30323694 DC : 0 | BS EN 62631-2-1 - DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0.1 HZ - 10 MHZ), AC METHODS |
| ONORM EN ISO 1183-1 : 2013 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| ISO 8510-2:2006 | Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 2: 180 peel |
| BS ISO 16525-6:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of pendulum-type shear impact |
| 15/30302738 DC : 0 | BS ISO 19213 - IMPLANTS FOR SURGERY - TEST METHODS OF MATERIAL FOR USE AS A CORTICAL BONE MODEL |
| BS 2782-10:Method 1008D:1996 | Methods of testing plastics. Glass reinforced plastics Determination of apparent interlaminar shear strength on rods made of roving-reinforced resins |
| BS EN 15466-2:2009 | Primers for cold and hot applied joint sealants Determination of resistance against alkali |
| BS 2782-3 Method 370:1990 | Methods of testing plastics. Mechanical properties Determination of resistance to wear by abrasive wheels |
| BS ISO 12817:2013 | Fibre-reinforced plastic composites. Determination of open-hole compression strength |
| ISO 15988:2003 | Plastics — Film and sheeting — Biaxially oriented poly(ethylene terephthalate) (PET) films |
| BS 2782-5:Method 540D:1995 | Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources. General guidance |
| ISO 18319:2015 | Fibre-reinforced polymer (FRP) reinforcement for concrete structures — Specifications of FRP sheets |
| ISO 11343:2003 | Adhesives Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions Wedge impact method |
| ISO 15034:1999 | Composites Prepregs Determination of resin flow |
| ISO 24335:2006 | Laminate floor coverings — Determination of impact resistance |
| UNE-ISO 1268-4:2012 | Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| BS EN 15836-2:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| BS ISO 11468 : 1997 AMD 10717 | PLASTICS - PREPARATION OF PVC PASTES FOR TEST PURPOSES - DISSOLVER METHOD |
| BS ISO 18489:2015 | Polyethylene (PE) materials for piping systems. Determination of resistance to slow crack growth under cyclic loading. Cracked Round Bar test method |
| 15/30325373 DC : 0 | BS EN 13592 - PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| ISO 12817:2013 | Fibre-reinforced plastic composites — Determination of open-hole compression strength |
| BS ISO 4587:2003 | Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
| BS ISO 16525-8:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Electrochemical-migration test methods |
| UNE-EN 60695-2-13:2011 | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials |
| ISO 4612:1999 | Plastics Preparation of PVC pastes for test purposes Planetary-mixer method |
| 11/30196210 DC : 0 | BS ISO 12815 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH |
| BIS IS 13360-5-8 : 2013 | PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 8: DETERMINATION OF COMPRESSIVE PROPERTIES |
| BS ISO 9988-2 : 2006 | PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 15466-2:2009 | PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 2: DETERMINATION OF RESISTANCE AGAINST ALKALI |
| ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| EN ISO 14632:1998 | Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:1998) |
| I.S. EN ISO 25137-2:2017 | PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009) |
| I.S. EN ISO 11502:2005 | PLASTICS - FILM AND SHEETING - DETERMINATION OF BLOCKING RESISTANCE |
| I.S. EN 16153:2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS ISO 1622-2 : 1995 AMD 10649 | PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 06/30132356 DC : DRAFT FEB 2006 | ISO 22007-4 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD |
| BS EN ISO 16012:2015 | Plastics. Determination of linear dimensions of test specimens |
| 14/30298178 DC : 0 | BS ISO 11528 - BUILDINGS AND CIVIL ENGINEERING WORKS - SEALANTS - DETERMINATION OF CHANGES IN ADHESION, COHESION AND APPEARANCE OF ELASTIC WEATHERPROOFING SEALANTS AFTER EXPOSURE OF STATICALLY CURED SPECIMENS TO ARTIFICIAL WEATHERING AND MECHANICAL CYCLING - CLASSIFICATION AND REQUIREMENTS FOR PEDESTRIAN WALKWAY SEALANTS |
| UNI EN 12960 : 2012 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF SHEAR RESISTANCE |
| DD ENV 1007-2:1994 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of linear density |
| BS 2782-10:Method 1008C:1996 | Methods of testing plastics. Glass reinforced plastics Determination of compressive strength on rods made from roving-reinforced resins |
| UNE-ISO 4582:2014 | Plastics. Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources |
| ISO 15100:2000 | Plastics Reinforcement fibres Chopped strands Determination of bulk density |
| UNE-EN ISO 11357-3:2013 | Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011) |
| DIN ISO 16486-3:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings (ISO 16486-3:2012 + AMD 1:2014) |
| NF EN ISO 6721-1 : 2011 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| BS ISO 4582:2017 | Plastics. Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| BS EN 13696:2008 | Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance |
| ISO 19212:2006 | Adhesives Determination of temperature dependence of shear strength |
| BS EN 60695-11-5:2017 | Fire hazard testing Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance |
| BS 2782-3.353A(1991) : 1991 AMD 8640 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF MULTI-AXIAL IMPACT BEHAVIOUR BY THE FALLING DART METHOD |
| BS EN 28031:1993 | Rubber and plastics hoses and hose assemblies. Determination of electrical resistance |
| DIN EN 455-4:2009-10 | MEDICAL GLOVES FOR SINGLE USE - PART 4: REQUIREMENTS AND TESTING FOR SHELF LIFE DETERMINATION |
| 13/30283694 DC : 0 | BS EN ISO 1135-5 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS |
| I.S. EN 15466-3:2009 | PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 3: DETERMINATION OF SOLIDS CONTENT AND EVAPORATION BEHAVIOUR OF VOLATILES |
| BS ISO 18944:2014 | Imaging materials. Reflection colour photographic prints. Test print construction and measurement |
| 07/30127284 DC : 0 | BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| BS EN ISO 20568-2:2017 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 15860:2010 | Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods |
| 17/30352670 DC : 0 | BS IEC 62899-402-2 - PRINTED ELECTRONICS - PART 402-2: PRINTABILITY - MEASUREMENT OF QUALITITIES - EDGE WAVINESS |
| 07/30159606 DC : 0 | BS ISO 1922 - RIGID CELLULAR PLASTICS - DETERMINATION OF SHEAR STRENGTH |
| 15/30304402 DC : 0 | BS EN ISO 20028-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 2528:2017 | Sheet materials. Determination of water vapour transmission rate (WVTR). Gravimetric (dish) method |
| 05/30141310 DC : DRAFT NOV 2005 | ISO 845 - CELLULAR PLASTICS AND RUBBERS - DETERMINATION OF APPARENT DENSITY |
| PD CR 14376:2002 | Adhesives. Ahesives for paper and board, packaging and disposable sanitary products. Description and assessment of the setting process |
| ISO 15105-1:2007 | Plastics Film and sheeting Determination of gas-transmission rate Part 1: Differential-pressure methods |
| BS ISO 11357-2 : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT |
| BS 2782-8.831A.B(1993) : 1993 AMD 9929 | METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) BY THE BALL OR PIN IMPRESSION METHOD |
| ISO 17555:2003 | Plastics Film and sheeting Biaxially oriented polypropylene (PP) films |
| I.S. EN 16465:2015 | PLASTICS - METHODS FOR THE CALIBRATION OF BLACK-STANDARD AND WHITE-STANDARD THERMOMETERS AND BLACK-PANEL AND WHITE-PANEL THERMOMETERS FOR USE IN NATURAL AND ARTIFICIAL WEATHERING |
| BS ISO 4606:1995 | Textile glass. Woven fabric. Determination of tensile breaking force and elongation at break by the strip method |
| ASTM D 5942 : 1996 | Test Method for Determination of Charpy Impact Strength (Withdrawn 1998) |
| 01/648266 DC : DRAFT MAY 2001 | ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| 03/109038 DC : DRAFT MAY 2003 | ISO 9163 - TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| 04/30091870 DC : DRAFT FEB 2004 | BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 05/19970897 DC : 0 | BS ISO 4898 - RIGID CELLULAR PLASTICS - THERMAL INSULATION PRODUCTS FOR BUILDINGS - SPECIFICATIONS |
| EN ISO 7823-3:2007 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| BS 2782-9.920A.C(1977) : 1977 | METHODS OF TESTING PLASTICS - SAMPLING AND TEST SPECIMEN PREPARATION - PREPARATION OF GLASS FIBRE REINFORCED, RESIN BONDED, LOW-PRESSURE LAMINATED PLATES OR PANELS FOR TEST PURPOSES |
| BS ISO 11003-1:2001 | Adhesives. Determination of shear behaviour of structural adhesives Torsion test method using butt-bonded hollow cylinders |
| 07/30146418 DC : 0 | ISO 25179 - ADHESIVES - DETERMINATION OF SOLUBILITY OF WATER-SOLUBLE OR ALKALI-SOLUBLE PRESSURE-SENSITIVE ADHESIVES |
| BS ISO 11833-1:1998 | Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics Sheets of thickness not less than 1 mm |
| 15/30289583 DC : 0 | BS EN 62788-1-5 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS |
| EN 60695-11-5:2017 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| 06/30146747 DC : DRAFT FEB 2006 | ISO 22007-2 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISK) METHOD |
| DD ENV 1007-1:1994 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of size content |
| BS 2782-8.833A.C(1993) : 1993 AMD 9927 | METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) BY THE CONSTANT TENSILE STRESS METHOD |
| CEI EN 60216-8 : 2014 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES |
| I.S. EN ISO 11855-5:2015 | BUILDING ENVIRONMENT DESIGN - DESIGN, DIMENSIONING, INSTALLATION AND CONTROL OF EMBEDDED RADIANT HEATING AND COOLING SYSTEMS - PART 5: INSTALLATION (ISO 11855-5:2012) |
| CSA ISO/IEC 15457-3 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| I.S. EN 60695-2-12:2010 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| NFT 51 123 : 1998 | PLASTICS - VERIFICATION OF SHORE HARDNESS DUROMETERS |
| UNI EN ISO 11357-2 : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT |
| BS EN ISO 9988-2:2015 | Plastics. Polyoxymethylene (POM) moulding and extrusion materials Preparation of test specimens and determination of properties |
| PREN ISO 11963 : DRAFT 2011 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| ISO 15106-4:2008 | Plastics Film and sheeting Determination of water vapour transmission rate Part 4: Gas-chromatographic detection sensor method |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace |
| ASTM D 5943 : 1996 | Test Method for Determination of Flexural Properties (Withdrawn 1998) |
| I.S. EN 4691-1:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| ISO 15987:2003 | Plastics — Film and sheeting — Biaxially oriented polyamide (nylon) films |
| UNE-EN 62631-1:2012 | Dielectric and resistive properties of solid insulating materials - Part 1: General |
| I.S. EN 62788-1-6:2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE |
| I.S. EN ISO 22007-4:2017 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017) |
| ISO 4586-2:2015 | High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties |
| ISO 18946:2011 | Imaging materials — Reflection colour photographic prints — Method for testing humidity fastness |
| I.S. EN ISO 2507-1:2017 | THERMOPLASTICS PIPES AND FITTINGS - VICAT SOFTENING TEMPERATURE - PART 1: GENERAL TEST METHOD (ISO 2507-1:1995) |
| I.S. EN ISO 6721-1:2011 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| ISO/TR 7147:1985 | Plain bearings — Testing of the tribological behaviour of plastics |
| ISO 25217:2009 | Adhesives Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens |
| ISO 27547-1:2010 | Plastics — Preparation of test specimens of thermoplastic materials using mouldless technologies — Part 1: General principles, and laser sintering of test specimens |
| NF ISO 16790 : 2006 | PLASTICS - DETERMINATION OF DRAWING CHARACTERISTICS OF THERMOPLASTICS IN THE MOLTEN STATE |
| BS ISO 15527 : 2010 | PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS |
| ISO 1663:2007 | Rigid cellular plastics — Determination of water vapour transmission properties |
| DIN EN ISO 25137-2:2016-08 (Draft) | PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009) |
| DIN EN 15860:2016-07 (Draft) | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| ISO 4585:1989 | Textile glass reinforced plastics Determination of apparent interlaminar shear properties by short-beam test |
| EN ISO 2818:1996 | Plastics - Preparation of test specimens by machining (ISO 2818:1994) |
| UNE-EN 60695-2-12:2011 | Fire hazard testing -- Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials |
| EN ISO 12017:1996 | Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:1995) |
| NF EN ISO 11502 : 2005 | PLASTICS - FILM AND SHEETING - DETERMINATION OF BLOCKING RESISTANCE |
| I.S. EN ISO 1110:1998 | PLASTICS - POLYAMIDES - ACCELERATED CONDITIONING OF TEST SPECIMENS |
| 17/30353403 DC : 0 | BS EN 17097 - GEOSYNTHETICS - CHARACTERISTICS REQUIRED FOR USE IN SURFACE EROSION CONTROL ON SLOPES AND BANKS |
| UNE-EN ISO 1183-1:2013 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| BS EN ISO 846:1997 | Plastics. Evaluation of the action of microorganisms |
| I.S. EN 62631-1:2011 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL |
| NF ISO 3343 : 2011 | REINFORCEMENT YARNS - DETERMINATION OF TWIST BALANCE INDEX |
| BS EN ISO 10350-1:2017 | Plastics. Acquisition and presentation of comparable single-point data Moulding materials |
| PREN 17129 : DRAFT 2017 | CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION |
| BS EN ISO 11502:2005 | Plastics. Film and sheeting. Determination of blocking resistance |
| EN ISO 11855-5:2015 | Building environment design - Design , dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2012) |
| BS EN ISO 4612:1999 | Plastics. Preparation of PVC pastes for test purposes. Planetary-mixer method |
| ISO 16525-8:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 8: Electrochemical-migration test methods |
| ONORM EN ISO 11403-3 : 2015 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014) |
| ISO 17467-3:2012 | Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 3: Fittings |
| ISO 7391-2:2006 | Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| EN 15860:2010 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| PREN 17072 : DRAFT 2017 | CHILD CARE ARTICLES - BATH TUBS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 11003-2:2001 | Adhesives Determination of shear behaviour of structural adhesives Part 2: Tensile test method using thick adherends |
| ISO 8570:1991 | Plastics Film and sheeting - Determination of cold-crack temperature |
| ISO 14782:1999 | Plastics Determination of haze for transparent materials |
| I.S. EN ISO 846:1998 | PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS |
| ISO 16525-1:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 1: General test methods |
| ISO 75-1:2013 | Plastics Determination of temperature of deflection under load Part 1: General test method |
| DIN EN ISO 7765-1:2004-10 | Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988) |
| DIN EN ISO 179-1:2010-11 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| DIN EN ISO 7792-2:2013-03 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012) |
| DIN EN ISO 10352:2011-04 | FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA |
| DIN EN ISO 3219:1994-10 | Determination of viscosity of polymers and resins in the liquid state or as emulsions or dispersions using a rotational viscometer with defined shear rate (ISO 3219:1993) |
| BS EN ISO 3146:2000 | Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
| BS EN ISO 1163-2:2000 | Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 8986-2:2009 | Plastics. Polybutene-1 (PB-1) moulding and extrusion materials Preparation of test specimens and determination of properties |
| ISO 11248:1993 | Plastics — Thermosetting moulding materials — Evaluation of short-term performance at elevated temperatures |
| ISO 30013:2011 | Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties |
| BS EN ISO 9773:1999 | Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source |
| ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
| ISO 1889:2009 | Reinforcement yarns Determination of linear density |
| ISO 3374:2000 | Reinforcement products Mats and fabrics Determination of mass per unit area |
| ISO 3146:2000 | Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
| BS EN ISO 1110:1998 | Plastics. Polyamides. Accelerated conditioning of test specimens |
| BS EN ISO 472:2013 | Plastics. Vocabulary |
| BS EN 12562:1999 | Textiles. Para-aramid multifilament yarns. Test methods |
| ISO 11339:2010 | Adhesives T-peel test for flexible-to-flexible bonded assemblies |
| ISO 22007-4:2017 | Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method |
| BS EN 28510-1:2014 | Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly 90° peel |
| BS EN ISO 2898-2:2008 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Preparation of test specimens and determination of properties (ISO 2898-2:2008) |
| ISO 15252-2:1999 | Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 6383-1:2015 | Plastics Film and sheeting Determination of tear resistance Part 1: Trouser tear method |
| BS EN 14447:2005 | Fibre reinforced plastics. Glass mat reinforced thermoplastics (GMT). Determination of flowability and solidification |
| BS EN ISO 6186:1999 | Plastics. Determination of pourability |
| BS EN ISO 11468:2000 | Plastics. Preparation of PVC pastes for test purposes. Dissolver method |
| ISO 29664:2010 | Plastics Artificial weathering including acidic deposition |
| BS EN ISO 14130:1998 | Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method |
| ISO 16012:2015 | Plastics Determination of linear dimensions of test specimens |
| ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
| BS EN ISO 11963:2012 | Plastics. Polycarbonate sheets. Types, dimensions and characteristics |
| BS EN ISO 175:2010 | Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals |
| ISO 14663-2:1999 | Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 14631:1999 | Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods |
| BS EN ISO 7391-2:2006 | Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties |
| ISO 14527-2:1999 | Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 5659-2:2017 | Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test |
| BS EN ISO 483:2005 | Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value |
| BS EN 753-3:1999 | Identification card systems. Intersector thin flexible cards Test methods |
| BS EN ISO 15310:2005 | Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method |
| BS EN ISO 1890:1997 | Reinforcement yarns. Determination of twist |
| BS EN ISO 7792-2:2012 | Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties |
| ISO 11359-1:2014 | Plastics — Thermomechanical analysis (TMA) — Part 1: General principles |
| ISO 15526-2:2000 | Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 8295:1995 | Plastics Film and sheeting Determination of the coefficients of friction |
| BS EN ISO 527-1:2012 | Plastics. Determination of tensile properties General principles |
| BS EN ISO 14530-2:2000 | Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties |
| BS EN ISO 15252-2:2000 | Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties |
| BS EN ISO 11403-3:2014 | Plastics. Acquisition and presentation of comparable multipoint data Environmental influences on properties |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 15013:2007 | Plastics Extruded sheets of polypropylene (PP) Requirements and test methods |
| BS EN ISO 845:2009 | Cellular plastics and rubbers. Determination of apparent density |
| ISO 21509:2006 | Plastics and ebonite Verification of Shore durometers |
| CEN/TR 14548:2003 | Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| DIN EN ISO 2898-2:2009-03 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 845:2009-10 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
| DIN EN ISO 8295:2004-10 | Plastics - Film and sheeting - Determination of the coefficients of friction (ISO 8295:1995); German version EN ISO 8295:2004 |
| DIN EN ISO 527-1:2012-06 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
| DIN EN ISO 6383-1:2016-05 | PLASTICS - FILM AND SHEETING - DETERMINATION OF TEAR RESISTANCE - PART 1: TROUSER TEAR METHOD (ISO 6383-1:2015) |
| EN ISO 1135-4 : 2015 COR 2016 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015) |
| DIN EN ISO 2578:1998-10 | PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT |
| DIN EN ISO 14663-2:2006-06 | PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| DIN EN ISO 12086-2:2006-05 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 3146:2002-06 | Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000); German version EN ISO 3146:2000 |
| DIN EN 14869-2:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| EN 12365-4:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| EN 1007-2:2002 | Advanced technical ceramics - Ceramics composites - Methods of test for reinforcement - Part 2: Determination of linear density |
| EN 12654-2:1998 | Textile glass - Yarns - Part 2: Methods of test and general specifications |
| EN 62326-20:2016 | Printed boards - Part 20: Printed circuit boards for high-brightness LEDs |
| EN 13421:2006 | Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
| DIN EN ISO 6383-2:2004-10 | Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983) |
| DIN EN ISO 11403-2:2013-01 | Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012) |
| DIN EN ISO 15013:2008-01 | Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007); German version EN ISO 15013:2007 |
| DIN EN ISO 11403-3:2002-02 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014) |
| EN 60216-8:2013 | Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures |
| DIN EN 14415:2004-08 | Geosynthetic barriers - Test method for determining the resistance to leaching |
| DIN EN ISO 8986-2:2010-04 | PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 22007-4:2012-04 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017) |
| DIN EN ISO 15310:2005-10 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999) |
| DIN EN ISO 4892-1:2001-09 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| EN 62631-1 : 2011 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL (IEC 62631-1:2011) |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| BS 2782-3.359(1993) : 1993 AMD 8643 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF CHARPY IMPACT STRENGTH |
| BS 2782-3.345A(1993) : 1993 AMD 8637 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF COMPRESSIVE PROPERTIES |
| BS 2782-3.365B(1992) : AMD 9926 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A DUROMETER (SHORE HARDNESS) |
| BS 2782-3.365C(1992) : 1992 AMD 10694 | PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS |
| BS 903-C3:1982 | Methods of testing vulcanized rubber. Determination of loss tangent and permittivity at power and audio frequencies |
| BS 2782-3.360B(1991) : 1991 AMD 15284 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF TEAR RESISTANCE OF PLASTICS FILM AND SHEETING BY THE TROUSER TEAR METHOD |
| BS 2782-7.730B(1994) : 1994 AMD 8630 | METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF THE VISCOSITY OF POLYMERS IN THE LIQUID, EMULSIFIED OR DISPERSED STATE, USING A ROTATIONAL VISCOMETER WORKING AT A DEFINED SHEAR RATE |
| BS 903-C4:1983 | Physical testing of rubber Determination of electric strength |
| UNE-EN 16153:2013 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| BS 2782-3.350(1993) : 1993 AMD 8641 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF IZOD IMPACT STRENGTH |
| BS 7008-1(1994) : AMD 8821 | ACQUISITION AND PRESENTATION OF COMPARABLE DATA FOR BASIC PROPERTIES OF PLASTICS - METHOD FOR SINGLE POINT DATA |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 62:2008 | Plastics Determination of water absorption |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.