ISO 3696:1987
Current
The latest, up-to-date edition.
Water for analytical laboratory use — Specification and test methods
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
09-04-1987
Specifies the requirements for three grades for the analysis of inorganic chemicals. Not applicable to organic trace analysis, analysis of surface-active agents and biological or medical analysis. The material shall be a clear, colourless liquid as assessed by inspection. Classifies according to the content: free from dissolved or colloidal ionic and organic contaminants, very low inorganic, organic or colloidal contaminants and suitable for laboratory wet chemistry work. Specifies the pH and conductivity measurement, the limit tests for oxidizable matter and for reactive silica, the measurement of absorbance and the determination of residue after evaporation at 110 °C.
Committee |
ISO/TC 47
|
DocumentType |
Standard
|
Pages |
5
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
NF EN ISO 3696 : 1995 | Identical |
NBN EN ISO 3696 : 1995 | Identical |
NEN EN ISO 3696 : 1995 | Identical |
NS EN ISO 3696 : 1ED 1995 | Identical |
I.S. EN ISO 3696:1996 | Identical |
PN EN ISO 3696 : 1999 | Identical |
SN EN ISO 3696 : 1996 | Identical |
UNI EN ISO 3696 : 1996 | Identical |
SS-EN ISO 3696 : 1995 | Identical |
UNE-EN ISO 3696:1996 | Identical |
BS EN ISO 3696:1995 | Identical |
EN ISO 3696:1995 | Identical |
DIN ISO 3696:1991-06 | Identical |
JIS C 2134:2021 | Identical |
SS-ISO 1442:2023 | Identical |
UNE 77081:1993 | Identical |
BS 3978(1987) : 1987 AMD 8807 | Identical |
ISO 1952:2008 | Solid mineral fuels — Determination of extractable metals in dilute hydrochloric acid |
I.S. EN ISO 12228-2:2014 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 2: OLIVE AND OLIVE POMACE OILS (ISO 12228-2:2014) |
BS EN ISO 11640:2012 | Leather. Tests for colour fastness. Colour fastness to cycles of to-and-fro rubbing |
BS ISO 14932:2012 | Rubber compounding ingredients. Organic vulcanizing agents. Determination of organic peroxide content |
BS ISO 12183:2016 | Nuclear fuel technology. Controlled-potential coulometric assay of plutonium |
DIN EN 1911:2010-12 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
I.S. EN 16278:2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF INORGANIC ARSENIC BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HG-AAS) AFTER MICROWAVE EXTRACTION AND SEPARATION BY SOLID PHASE EXTRACTION (SPE) |
DIN 51576:2003-01 | TESTING OF MINERAL OIL HYDROCARBONS - DETERMINATION OF SALT CONTENT |
DIN EN 15688:2008-11 | FERTILIZERS - DETERMINATION OF UREASE INHIBITOR N-(N-BUTYL)THIOPHOSPHORIC TRIAMIDE (NBPT) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
BS ISO 18857-1 : 2005 AMD 16672 | WATER QUALITY - DETERMINATION OF SELECTED ALKYLPHENOLS - PART 1: METHOD FOR NON-FILTERED SAMPLES USING LIQUID-LIQUID EXTRACTION AND GAS CHROMATOGRAPHY WITH MASS SELECTIVE DETECTION |
DIN EN 14164:2014-08 | FOODSTUFFS - DETERMINATION OF VITAMIN B6 BY HIGH PERFORMANCE CHROMATOGRAPHY |
I.S. EN 15621:2017 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
ISO 6491:1998 | Animal feeding stuffs — Determination of phosphorus content — Spectrometric method |
NF EN ISO 439 : 2010 | STEEL AND IRON - DETERMINATION OF TOTAL SILICON CONTENT - GRAVIMETRIC METHOD |
BS 7079-B8(2001) : 2001 AMD 15515 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART B8: FIELD METHOD FOR THE REFRACTOMETRIC DETERMINATION OF MOISTURE |
ISO 10694:1995 | Soil quality Determination of organic and total carbon after dry combustion (elementary analysis) |
DIN EN ISO 14403-2:2012-10 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012) |
DIN EN ISO 4829-2:2016-08 | STEELS - DETERMINATION OF TOTAL SILICON CONTENTS - REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD - PART 2: SILICON CONTENTS BETWEEN 0,01 % AND 0,05 % (ISO 4829-2:2016) |
BS EN ISO 17230:2011 | Leather. Physical and mechanical tests. Determination of water penetration pressure |
17/30349825 DC : 0 | BS EN ISO 10704 - WATER QUALITY - GROSS ALPHA AND GROSS BETA ACTIVITY - TEST METHOD USING THIN SOURCE DEPOSIT |
DIN EN ISO 16187:2013-12 | FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO ASSESS ANTIBACTERIAL ACTIVITY (ISO 16187:2013) |
UNE-EN 15041:2015 | Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polyphosphates |
14/30286115 DC : 0 | BS EN 16651 - FERTILIZERS - DETERMINATION OF N-(N-BUTYL)THIOPHOSPHORIC ACID TRIAMIDE (NBPT) AND N-(N-PROPYL)THIOPHOSPHORIC ACID TRIAMIDE (NPPT) - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
UNE-EN 15721:2014 | Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method |
UNE-EN ISO 4787:2011 | Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15) |
ISO 10337:1997 | Crude petroleum — Determination of water — Coulometric Karl Fischer titration method |
BS EN ISO 13161:2015 | Water quality. Measurement of polonium 210 activity concentration in water by alpha spectrometry |
15/30328778 DC : 0 | BS EN 13251 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES |
BS ISO 17211:2015 | Stationary source emissions. Sampling and determination of selenium compounds in flue gas |
BS 6068-4.16(2003) : 2003 | WATER QUALITY - DETECTION AND ENUMERATION OF BACTERIOPHAGES - PART 3: VALIDATION OF METHODS FOR CONCENTRATION OF BACTERIOPHAGES FROM WATER |
ISO 21847-1:2007 | Nuclear fuel technology Alpha spectrometry Part 1: Determination of neptunium in uranium and its compounds |
DIN EN 15559:2009-06 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO ARND |
S.R. CEN/TS 16171:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ELEMENTS USING INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) |
14/30299493 DC : 0 | BS EN 14112 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
DIN EN 15039 E : 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - POLYCARBOXILIC ACIDS AND SALTS |
I.S. EN ISO 28723:2011 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF THE EDGE COVERING ON ENAMELLED STEEL PLATE TO BE USED IN HEAT EXCHANGERS |
DIN EN 1568-3:2016-08 (Draft) | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 3: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
ISO 16428:2005 | Implants for surgery — Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices |
16/30310662 DC : 0 | BS EN ISO 18369-3 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 3: MEASUREMENT METHODS |
BS ISO 9696:2007 | Water quality. Measurement of gross alpha activity in non-saline water. Thick source method |
BS EN ISO 11704:2015 | Water quality. Measurement of gross alpha and beta activity concentration in non-saline water. Liquid scintillation counting method |
10/30196720 DC : 0 | BS ISO 15181-6 - PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 6: DETERMINATION OF TRALOPYRIL RELEASE RATE BY QUANTIFICATION OF ITS DEGRADATION PRODUCT IN THE EXTRACT |
BS EN 15558:2009 | Fertilizers. Determination of nitric and ammoniacal nitrogen according to Ulsch |
14/30250838 DC : 0 | BS ISO 17319 - FERTILIZERS - DETERMINATION OF POTASSIUM CONTENT - POTASSIUM TETRAPHENYLBORATE GRAVIMETRIC METHOD |
13/30263420 DC : 0 | BS EN ISO 17730 - DENTISTRY - FLUORIDE VARNISHES |
DIN EN 16694:2015-12 | WATER QUALITY - DETERMINATION OF SELECTED POLYBROMINATED DIPHENLY ETHER (PBDE) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
10/30201937 DC : 0 | BS ISO 13161 - WATER QUALITY - MEASUREMENT OF POLONIUM 210 CONCENTRATION ACTIVITY IN WATER BY ALPHA SPECTROMETRY |
DIN EN 16711-2:2016-02 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
UNE-EN ISO 4920:2013 | Textile fabrics - Determination of resistance to surface wetting (spray test) (ISO 4920:2012) |
UNE-EN 16923:2018 | Foodstuffs - Determination of T-2 toxin and HT-2 toxin in cereals and cereal products for infants and young children by LC-MS/MS after SPE cleanup |
UNE-EN 15911:2011 | Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection |
I.S. EN ISO 11260:2011 | SOIL QUALITY - DETERMINATION OF EFFECTIVE CATION EXCHANGE CAPACITY AND BASE SATURATION LEVEL USING BARIUM CHLORIDE SOLUTION (ISO 11260:2018) |
BS ISO 9694 : 1996 AMD 10436 | DENTAL PHOSPHATE-BONDED CASTING INVESTMENTS |
12/30219112 DC : 0 | BS EN ISO 9308-1 - WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD |
DIN 10259:1998-06 | MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF CITRATE CONTENT |
BS EN 16619:2015 | Food analysis. Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by gas chromatography mass spectrometry (GC-MS) |
I.S. EN ISO 19071:2016 | LEATHER - CHEMICAL TESTS - DETERMINATION OF CHROMIUM (6) AND THE REDUCTIVE POTENTIAL FOR CHROMIUM TANNING AGENTS (ISO 19071:2016) |
PD CEN/TR 15119:2005 | Durability of wood and wood-based products. Estimation of emissions from preservative treated wood to the environment. Wood held in the storage yard after treatment and wooden commodities exposed in use class 3 (not covered, not in contact with the ground), and wooden commodities exposed in use class 4 or 5 (in contact with the ground, fresh water or sea water). Laboratory method |
BS ISO 22634-1:2017 | Cigarettes. Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS Method using methanol as extraction solvent |
DD ENV 1250-2:1995 | Wood preservatives. Methods of measuring losses of active ingredients and other preservative ingredients from treated timber Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water |
BS EN 16155:2012 | Foodstuffs. Determination of sucralose. High performance liquid chromatographic method |
I.S. EN ISO 5403:2003 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF WATER RESISTANCE OF FLEXIBLE LEATHER |
ONORM EN ISO 6872 : 2015 | DENTISTRY - CERAMIC MATERIALS (ISO 6872:2015) |
09/30203510 DC : 0 | BS ISO 5402-1 - LEATHER - DETERMINATION OF FLEX RESISTANCE - PART 1: FLEXOMETER METHOD |
BS EN ISO 28723:2011 | Vitreous and porcelain enamels. Determination of the edge covering on enamelled steel plate to be used in heat exchangers |
14/30261903 DC : 0 | BS EN 16711-1 - TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
07/30169145 DC : 0 | BS ISO 28706-1 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 1: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ACIDS AT ROOM TEMPERATURE |
05/30116675 DC : DRAFT MAR 2005 | BS ISO 10203 - IRON ORES - DETERMINATION OF CALCIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
BS EN 16400:2013 | Chemicals used for treatment of swimming pool water. Hydrogen peroxide |
06/30155664 DC : DRAFT SEP 2006 | ISO 22960 - TITANIUM AND TITANIUM ALLOYS - DETERMINATION OF IRON - MOLECULAR ABSORPTION SPECTROMETRY USING 1,10-PHENANTHROLINE |
BS EN 16418:2014 | Paper and board. Determination of the cytotoxicity of aqueous extracts using a metabolically competent hepatoma cell line (HepG2) |
PREN 13037 : DRAFT 2009 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PH |
12/30258182 DC : 0 | BS EN 12121 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM DISULFITE |
BS ISO 14892:2002 | Dried skimmed milk. Determination of vitamin D content using high-performance liquid chromatography |
BS EN ISO 16187:2013 | Footwear and footwear components. Test method to assess antibacterial activity |
PREN 13491 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
BS EN 16007:2011 | Animal feeding stuffs. Determination of ochratoxin A in animal feed by immunoaffinity column clean-up and high performance liquid chromatography with fluorescence detection |
15/30272445 DC : DRAFT MAY 2015 | BS EN 16858 - FOODSTUFFS - DETERMINATION OF MELAMINE AND CYANURIC ACID IN FOODSTUFFS BY LIQUID CHROMATOGRAPHY AND TANDEM MASS SPECTROMETRY (LC-MS/MS) |
03/118673 DC : DRAFT DEC 2003 | ISO 16784-2 - INDUSTRIAL COOLING WATER SYSTEMS - TESTING AND PERFORMANCE - EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES |
I.S. EN 13512:2002 | FOOTWEAR - TEST METHODS FOR UPPERS AND LINING - FLEX RESISTANCE |
I.S. EN 1483:2007 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY |
16/30310665 DC : 0 | BS EN ISO 18369-4 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 4: PHYSICOCHEMICAL PROPERTIES OF CONTACT LENS MATERIALS |
DD ENV ISO 8502-1:2001 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Field test for soluble iron corrosion products |
ISO 9682-2:2006 | Iron ores Determination of manganese content Part 2: Periodate spectrophotometric method |
BS ISO 18073:2004 | Water quality. Determination of tetra- to octa-chlorinated dioxins and furans. Method using isotope dilution HRGC/HRMS |
11/30227250 DC : 0 | BS EN ISO 21563 - DENTISTRY - HYDROCOLLOID IMPRESSION MATERIALS |
04/30088797 DC : DRAFT APR 2004 | ISO 18369 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 3: MEASUREMENT METHODS |
I.S. EN 16620:2015 | FOOD ANALYSIS - DETERMINATION OF FURAN IN COFFEE AND COFFEE PRODUCTS BY HEADSPACE GAS CHROMATOGRAPHY AND MASS SPECTROMETRY (HS -MS) |
I.S. EN 12873-4:2006 | INFLUENCE OF MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - INFLUENCE DUE TO MIGRATION - PART 4: TEST METHOD FOR WATER TREATMENT MEMBRANES |
13/30272428 DC : 0 | BS EN 16618 - FOOD ANALYSIS - DETERMINATION OF ACRYLAMIDE IN FOOD BY LIQUID CHROMATOGRAPHY TANDEM MASS SPECTROMETRY (LC-ESI-MS-MS) |
DIN EN 16418:2014-07 | PAPER AND BOARD - DETERMINATION OF THE CYTOTOXICITY OF AQUEOUS EXTRACTS USING A METABOLICALLY COMPETENT HEPATOMA CELL LINE (HEPG2) |
UNI EN 16037 : 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN SULFATE |
I.S. EN ISO 8795:2001 | PLASTICS PIPING SYSTEMS FOR THE TRANSPORT OF WATER INTENDED FOR HUMAN CONSUMPTION - MIGRATION ASSESSMENT - DETERMINATION OF MIGRATION VALUES OF PLASTICS PIPES AND FITTINGS AND THEIR JOINTS |
NF ISO 20369 : 2010 | MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF CITRATE CONTENT |
BS ISO/TS 12928:1999 | Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications |
UNI EN 4195 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF CHROMATE LEACHING |
13/30283691 DC : 0 | BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED |
06/30156589 DC : DRAFT OCT 2006 | ISO 21268-4 - SOIL QUALITY LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 4: INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
BS ISO 11085 : 2008 | CEREALS, CEREALS-BASED PRODUCTS AND ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT AND TOTAL FAT CONTENT BY THE RANDALL EXTRACTION METHOD |
BS EN ISO 17943:2016 | Water quality. Determination of volatile organic compounds in water. Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS) |
BIS IS 16079-2 : 2013 | ANIMAL FEEDING STUFFS - DETERMINATION OF THE CONTENT OF FATTY ACIDS - PART 2: GAS CHROMATOGRAPHIC METHOD |
14/30295249 DC : 0 | BS EN 16715 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
15/30284318 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
BS EN ISO 20541:2008 | Milk and milk products. Determination of nitrate content. Method by enzymatic reduction and molecular- absorption spectrometry after Griess reaction |
BS ISO 18069:2015 | Corrosion of metals and alloys. Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids |
BS ISO 15705:2002 | Water quality. Determination of the chemical oxygen demand index (ST-COD). Small-scale sealed-tube method |
15/30324939 DC : 0 | BS EN 16923 - FOODSTUFFS - DETERMINATION OF T-2 TOXIN AND HT-2 TOXIN IN CEREALS AND CEREAL PRODUCTS FOR INFANTS AND YOUNG CHILDREN BY LC-MS/MS AFTER SPE CLEANUP |
ISO 18363-3:2017 | Animal and vegetable fats and oils — Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS — Part 3: Method using acid transesterification and measurement for 2-MCPD, 3-MCPD and glycidol |
16/30338114 DC : 0 | BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
BS ISO 25761:2014 | Plastics. Polyols for use in the production of polyurethanes. Determination of basicity (total amine value), expressed as percent nitrogen |
BIS IS 16028 : 2012 | COFFEE AND COFFEE PRODUCTS - DETERMINATION OF THE CAFFEINE CONTENT USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) - REFERENCE METHOD |
15/30328787 DC : 0 | BS EN 13265 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS |
BS EN 15837:2009 | Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulfur content. Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
04/30113349 DC : DRAFT MAY 2004 | ISO 4263-3 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS - TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS |
BS EN 15845:2010 | Paper and board. Determination of the cytotoxicity of aqueous extracts |
03/300545 DC : DRAFT FEB 2003 | EN 889 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (2) SULFATE |
ISO 6492:1999 | Animal feeding stuffs — Determination of fat content |
BS EN 15781:2009 | Animal feeding stuffs. Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation |
08/30184486 DC : DRAFT JUNE 2008 | BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE |
BS EN ISO 16373-3:2014 | Textiles. Dyestuffs Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) |
BS ISO 21613 : 2015 | (U, PU)O[2] POWDERS AND SINTERED PELLETS - DETERMINATION OF CHLORINE AND FLUORINE |
BS ISO 15914 : 2004 AMD 15759 | ANIMAL FEEDING STUFFS - ENZYMATIC DETERMINATION OF TOTAL STARCH CONTENT |
BIS IS 16027 : 2012 | TEA AND INSTANT TEA IN SOLID FORM - DETERMINATION OF CAFFEINE CONTENT - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
DD ENV 14166:2001 | Foodstuffs. Determination of vitamin B<sub>6</sub> by microbiological assay |
DIN EN ISO 20795-2:2013-06 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO 20795-2:2013) |
DIN EN 15411:2011-11 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
PD CEN/TS 12404:2015 | Durability of wood and wood-based products. Assessment of the effectiveness of a masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray. Laboratory method |
03/113426 DC : DRAFT OCT 2003 | EN ISO 20127 - DENTISTRY - PHYSICAL PROPERTIES OF POWERED TOOTHBRUSHES |
BS EN 16715:2015 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
BS ISO 18862:2016 | Coffee and coffee products. Determination of acrylamide. Methods using HPLC-MS/MS and GC-MS after derivatization |
BS EN 10351:2011 | Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
BS 5766-23:2001 | Methods for analysis of animal feeding stuffs Determination of crude fibre content. Method with intermediate filtration |
BS ISO 18645:2016 | Fertilizers and soil conditioners. Water soluble fertilizer. General requirements |
I.S. EN ISO 13438:2004 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO OXIDATION |
UNE-EN 16852:2017 | Foodstuffs - Determination of ethyl carbamate in stone fruit spirits, fruit marc spirits and other spirit drinks - GC-MS method |
UNE-EN ISO 16187:2014 | Footwear and footwear components - Test method to assess antibacterial activity (ISO 16187:2013) |
UNE-EN ISO 28706-3:2012 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (ISO 28706-3:2008) |
UNE-EN 14429:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition |
UNE-EN 16278:2012 | Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE) |
BS 2000-462.3(2004) : 2004 | PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 3: DETERMINATION AND QUANTIFICATION OF POLYCHLORINATED TERPHENYLS (PCT) AND POLYCHLORINATED BENZYL TOLUENES (PCBT) CONTENT BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD) |
I.S. EN 14035-35:2004 | FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
ISO 6713:1984 | Paints and varnishes — Preparation of acid extracts from paints in liquid or powder form |
BS 6782-12:1997 | Binders for paints Estimation of colour of clear liquids by the platinum-cobalt scale |
S.R. CEN/TR 10362:2014 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF SELENIUM IN STEELS - ELECTROTHERMAL ATOMIC ABSORPTION SPECTROMETRIC METHOD |
BS ISO 17992:2013 | Iron ores. Determination of arsenic content. Hydride generation atomic absorption spectrometric method |
11/30250564 DC : 0 | BS EN 16328 - FERTILIZERS - DETERMINATION OF 3,4-DIMETHYL-1H-PYRAZOLE-PHOSPHATE (DMPP) - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
ISO 11640:2012 | Leather Tests for colour fastness Colour fastness to cycles of to-and-fro rubbing |
UNI EN 16006 : 2011 | ANIMAL FEEDING STUFFS - DETERMINATION OF THE SUM OF FUMONISIN B[1] & B[2] IN COMPOUND ANIMAL FEED WITH IMMUNOAFFINITY CLEAN-UP AND RP-HPLC WITH FLUORESCENCE DETECTION AFTER PRE- OR POST-COLUMN DERIVATISATION |
PD CEN/TS 16375:2013 | Liming materials. Determination of the amount of residual finely ground carbonate in soils. Volumetric method |
NF EN ISO 17678 : 2010 | MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
UNI EN 15408 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF SULPHUR (S), CHLORINE (CL), FLUORINE (F) AND BROMINE (BR) CONTENT |
BS ISO 18252:2006 | Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Routine method) |
NF EN ISO 105 E07 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER |
14/30286016 DC : 0 | BS EN ISO 12966-4 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF METHYL ESTERS OF FATTY ACIDS - PART 4: CAPILLARY GAS CHROMATOGRAPHIC METHOD |
16/30290352 DC : 0 | BS EN ISO 19020 - MICROBIOLOGY OF FOOD CHAIN - HORIZONTAL METHOD FOR THE IMMUNOENZYMATIC DETECTION OF STAPHYLOCOCCAL ENTEROTOXINS IN FOODSTUFFS |
03/113406 DC : DRAFT OCT 2003 | ISO 7886-3 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED DOSE IMMUNIZATION |
DIN EN 15604:2009-06 | FERTILIZERS - DETERMINATION OF DIFFERENT FORMS OF NITROGEN IN THE SAME SAMPLE, CONTAINING NITROGEN AS NITRIC, AMMONIACAL, UREA AND CYANAMIDE NITROGEN |
12/30254411 DC : 0 | BS EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
DD CEN/TS 15477:2006 | Fertilizers. Determination of the water-soluble potassium content |
10/30199304 DC : DRAFT DEC 2010 | BS EN ISO 12782-2 - SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIFICATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 2: EXTRACTION OF CRYSTALLINE IRON OXIDES AND HYDROXIDES WITH DITHIONITE |
I.S. EN ISO 4629:1998 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF HYDROXYL VALUE - TITRIMETRIC METHOD |
11/30242579 DC : 0 | BS EN ISO 6873:2000 - DENTAL GYPSUM PRODUCTS |
15/30328784 DC : 0 | BS EN 13257 - GEOTEXTILES AND GEOTEXTILE-RELATED DOCUMENTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS |
ISO/PAS 22241-2:2005 | Diesel engines NOx reduction agent AUS 32 Part 2: Test methods |
16/30294375 DC : DRAFT APR 2016 | BS EN ISO 19343 - MICROBIOLOGY OF THE FOOD CHAIN - DETECTION AND QUANTIFICATION OF HISTAMINE IN FISH AND FISHERY PRODUCTS - HPLC METHOD |
05/30132540 DC : DRAFT APR 2005 | ISO 14801 - DENTISTRY - FATIGUE TEST FOR ENDOSSEOUS DENTAL IMPLANTS |
DIN EN ISO 15324:2008-07 | Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test (ISO 15324:2000) |
I.S. EN ISO 17489:2013 | LEATHER - CHEMICAL TESTS - DETERMINATION OF TAN CONTENT IN SYNTHETIC TANNING AGENTS (ISO 17489:2013) |
I.S. EN ISO 16744:2004 | DENTISTRY - BASE METAL MATERIALS FOR FIXED DENTAL RESTORATIONS |
ISO 5416:2006 | Direct reduced iron Determination of metallic iron Bromine-methanol titrimetric method |
BS ISO 13166:2014 | Water quality. Uranium isotopes. Test method using alpha-spectrometry |
10/30196545 DC : 0 | BS EN ISO 12846 - WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY (AAS) WITH AND WITHOUT ENRICHMENT |
04/30103836 DC : DRAFT JUL 2004 | ISO 11979-5 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 5: BIOCOMPATIBILITY |
UNI ISO 12830 : 2012 | PAPER, BOARD AND PULPS - DETERMINATION OF ACID-SOLUBLE MAGNESIUM, CALCIUM, MANGANESE, IRON, COPPER, SODIUM AND POTASSIUM |
BS EN 15829:2010 | Foodstuffs. Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit and dried figs. HPLC method with immunoaffinity column cleanup and fluorescence detection |
DIN EN ISO 2812-2:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD |
14/30256272 DC : 0 | BS ISO 17690 - WATER QUALITY - DETERMINATION OF FREE CYANIDE USING FLOW INJECTION ANALYSIS (FIA), GAS-DIFFUSION AND AMPEROMETRIC DETECTION |
I.S. EN 16847:2016 | FERTILIZERS - DETERMINATION OF COMPLEXING AGENTS IN FERTILIZERS - IDENTIFICATION OF HEPTAGLUCONIC ACID BY CHROMATOGRAPHY |
BS EN 16024:2011 | Fertilizers. Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea. Method using high-performance liquid chromatography (HPLC) |
PREN 16128 : DRAFT 2014 | OPHTHALMIC OPTICS - REFERENCE METHOD FOR THE TESTING OF SPECTACLE FRAMES AND SUNGLASSES FOR NICKEL RELEASE |
10/30199725 DC : 0 | BS EN 16160 - ANIMAL FEEDING STUFFS - DETERMINATION OF HYDROCYANIC ACID BY HPLC |
DIN EN ISO 17304:2014-03 | DENTISTRY - POLYMERIZATION SHRINKAGE: METHOD FOR DETERMINATION OF POLYMERIZATION SHRINKAGE OF POLYMER-BASED RESTORATIVE MATERIALS (ISO 17304:2013) |
BS EN 16070:2014 | Products used for treatment of water intended for human consumption. Natural zeolite |
BS ISO 16365-3:2014 | Plastics. Thermoplastic polyurethanes for moulding and extrusion Distinction between ether and ester polyurethanes by determination of the ester group content |
BS ISO 4939:2016 | Steel. Determination of nickel. Dimethylglyoxime spectrophotometric method |
I.S. EN 15749:2009 | FERTILIZERS - DETERMINATION OF SULFATES CONTENT USING THREE DIFFERENT METHODS |
16/30338123 DC : 0 | BS EN 16993 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
BS EN 15749:2009 | Fertilizers. Determination of sulfates content using three different methods |
13/30262946 DC : 0 | BS EN ISO 5402-2 - LEATHER - DETERMINATION OF FLEX RESISTANCE - PART 2: VAMP FLEX METHOD |
UNE-EN 16370:2014 | Chemicals used for treatment of water intended for human consumption - Sodium chloride for on site electrochlorination using membrane cells |
17/30291335 DC : 0 | BS EN ISO 8199 - WATER QUALITY - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS BY CULTURE |
DIN EN 16075:2012-01 | Fertilizers - Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatographie (HPLC) |
00/717547 DC : DRAFT DEC 2000 | ISO/DIS 7766-1 PHOTOGRAPHY - PROCESSING WASTES - ANALYSIS OF CYANIDES - PART 1: DETERMINATION OF HEXACYANOFERRATE (2) AND HEXACYANOFERRATE (3) BY SPECTROMETRY |
DIN EN ISO 13017:2016-05 | DENTISTRY - MAGNETIC ATTACHMENTS (ISO 13017:2012 + AMD.1:2015) |
DIN EN 16318:2016-07 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CHROMIUM(6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
BIS IS 16255 : 2014 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE VAMP FLEX METHOD |
ISO 22241-2:2006 | Diesel engines NOx reduction agent AUS 32 Part 2: Test methods |
UNI EN ISO 10271 : 2011 | DENTISTRY - CORROSION TEST METHODS FOR METALLIC MATERIALS |
BS EN ISO 13078-2:2016 | Dentistry. Dental furnace Test method for evaluation of furnace programme via firing glaze |
BS EN ISO 4946:2016 | Steel and cast iron. Determination of copper. 2,2\'-Biquinoline spectrophotometric method |
17/30298688 DC : 0 | BS ISO 6467 - FERROVANADIUM - DETERMINATION OF VANADIUM CONTENT - POTENTIOMETRIC METHOD |
DIN ISO 14502-2:2007-12 | DETERMINATION OF SUBSTANCES CHARACTERISTIC OF GREEN AND BLACK TEA - PART 2: CONTENT OF CATECHINS IN GREEN TEA - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
BS ISO 16729:2013 | Soil quality. Digestion of nitric acid soluble fractions of elements |
13/30278479 DC : 0 | BS ISO 25761 - PLASTICS - POLYOLS FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF BASICITY (TOTAL AMINE VALUE), EXPRESSED AS PERCENT NITROGEN |
UNE-EN 16651:2016 | Fertilizers - Determination of N-(n-Butyl)thiophosphoric acid triamide (NBPT) and N-(n-Propyl)thiophosphoric acid triamide (NPPT) - Method using high-performance liquid chromatography (HPLC) |
DIN EN ISO 5529:2010-08 | Wheat - Determination of the sedimentation index - Zeleny test (ISO 5529:2007); German version EN ISO 5529:2010 |
06/30145859 DC : DRAFT FEB 2006 | ISO 11534 - IRON ORES - DETERMINATION OF TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
BS EN 16801:2016 | Foodstuffs. Determination of elements and their chemical species. Determination of methylmercury in foodstuffs of marine origin by isotope dilution GC-ICP-MS |
09/30196709 DC : DRAFT DEC 2009 | BS ISO 2811-4 - PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 4: PRESSURE CUP METHOD |
PREN 14122 : DRAFT 2012 | FOODSTUFFS - DETERMINATION OF VITAMIN B1 BY HPLC |
DIN EN ISO 28706-5:2011-09 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems (ISO 28706-5:2010) |
UNE-EN 15028:2013 | Chemicals used for treatment of water intended for human consumption - Sodium chlorate |
12/30258179 DC : 0 | BS EN 12120 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN SULFITE |
12/30266351 DC : 0 | BS ISO 17992 - IRON ORES - DETERMINATION OF ARSENIC CONTENT - HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRIC METHOD |
12/30168914 DC : 0 | BS EN ISO 29022 - DENTISTRY - ADHESION - NOTCHED-EDGE SHEAR BOND STRENGTH TEST |
BS EN ISO 17234-1:2015 | Leather. Chemical tests for the determination of certain azo colorants in dyed leathers Determination of certain aromatic amines derived from azo colorants |
BS ISO 4524-2:2000 | Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings Mixed flowing gas (MFG) environmental tests |
BS EN ISO 11702:2009 | Animal and vegetable fats and oils. Enzymatic determination of total sterols content |
BS ISO 15038:1999 | Plastics. Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials. Determination of active-oxygen content |
DIN ISO 4621:1988-11 | PIGMENTS - CHROME OXIDE PIGMENTS - SPECIFICATIONS, METHODS OF TEST |
BIS IS 16079-1 : 2013 | ANIMAL FEEDING STUFFS - DETERMINATION OF THE CONTENT OF FATTY ACIDS - PART 1: PREPARATION OF METHYL ESTERS |
BS EN ISO 10703:2015 | Water quality. Determination of the activity concentration of radionuclides. Method by high resolution gamma-ray spectrometry |
EN ISO 15681-2:2004 | Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA) (ISO 15681-2:2003) |
DIN EN ISO 14088:2012-05 | LEATHER - CHEMICAL TESTS - QUANTITATIVE ANALYSIS OF TANNING AGENTS BY FILTER METHOD (ISO 14088:2012) |
UNI EN 15074 : 2014 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - OZONE |
BS ISO 5418-2:2006 | Iron ores. Determination of copper Flame atomic absorption spectrometric method |
08/30139026 DC : DRAFT AUG 2008 | BS ISO 26062 - NUCLEAR TECHNOLOGY - NUCLEAR FUELS - PROCEDURES FOR THE MEASUREMENT OF ELEMENTAL IMPURITIES IN URANIUM- AND PLUTONIUM-BASED MATERIALS BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY |
BS 2000-292(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMEN EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
BS EN 16924:2017 | Foodstuffs. Determination of zearalenone in edible vegetable oils by LC-FLD or LC-MS/MS |
UNE-EN 14362-1:2012 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres |
BS 6068-2.86(2003) : 2003 | WATER QUALITY - DETERMINATION OF ORTHOPHOSPHATE AND TOTAL PHOSPHORUS CONTENTS BY FLOW ANALYSIS (FIA AND CFA) - PART 1: METHOD BY FLOW INJECTION ANALYSIS (FIA) |
BS ISO 8199 : 2005 | WATER QUALITY - GENERAL GUIDANCE ON THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
BS 6200-3.40.3:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of copper content |
ISO 6488-1:1997 | Tobacco Determination of water content Part 1: Karl Fischer method |
11/30253304 DC : 0 | BS ISO 6588-1 - PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 1: COLD EXTRACTION |
I.S. CEN TS 15452:2006 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY O,P-EDDHA BY REVERSED PHASE HPLC |
BS 7755-3.2:1995 | Soil quality. Chemical methods Determination of pH |
02/564514 DC : DRAFT OCT 2002 | BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
I.S. EN ISO 5402-2:2015 | LEATHER - DETERMINATION OF FLEX RESISTANCE - PART 2: VAMP FLEX METHOD (ISO/FDIS 5402-2:2015) |
DD EN ISO/TS 17226 : 2003 | LEATHER - CHEMICAL TESTS - DETERMINATION OF FORMALDEHYDE CONTENT |
ONORM EN ISO 27587 : 2010 | LEATHER - CHEMICAL TESTS - DETERMINATION OF THE FREE FORMALDEHYDE IN PROCESS AUXILIARIES |
UNI EN ISO 4049 : 2009 | DENTISTRY - POLYMER-BASED RESTORATIVE MATERIALS |
NF EN ISO 15351 : 2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
06/30150544 DC : 0 | ISO 1952 - SOLID MINERAL FUELS - DETERMINATION OF EXTRACTABLE METALS IN DILUTE HYDROCHLORIC ACID |
BS EN 15950:2010 | Fertilizers. Determination of N-(1,2-dicarboxyethyl)-D,L-aspartic acid (Iminodisuccinic acid, IDHA) using high-performance liquid chromatography (HPLC) |
13/30276363 DC : 0 | BS ISO 4942 - STEEL AND IRON - DETERMINATION OF VANADIUM CONTENT - N-BPHA SPECTROPHOTOMETRIC METHOD |
13/30244111 DC : 0 | BS ISO 16780 - WATER QUALITY - DETERMINATION OF POLYCHLORINATED NAPHTHALENES (PCN) - METHOD USING GAS CHROMATOGRAPHY (GC) AND MASS SPECTROMETRY (MS) |
BS 6782-16.4(2000) : 2000 AMD 15241 | BINDERS FOR PAINTS - METHODS OF TEST FOR ALKYD RESINS, DETERMINATION OF FATTY ACID CONTENT |
15/30315528 DC : 0 | BS ISO 4802-2 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 2: DETERMINATION BY FLAME SPECTROMETRY AND CLASSIFICATION |
NF EN IEC 62554 : 2012 AMD 1 2018 | SAMPLE PREPARATION FOR MEASUREMENT OF MERCURY LEVEL IN FLUORESCENT LAMPS |
BS EN ISO 4829-2:2016 | Steels. Determination of total silicon contents. Reduced molybdosilicate spectrophotometric method Silicon contents between 0,01 % and 0,05 % |
UNI EN ISO 4787 : 2011 | LABORATORY GLASSWARE - VOLUMETRIC INSTRUMENTS - METHODS FOR TESTING OF CAPACITY AND FOR USE |
UNI EN ISO 9073-16 : 2009 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 16: DETERMINATION OF RESISTANCE TO PENETRATION BY WATER (HYDROSTATIC PRESSURE) |
BS ISO 18611-2:2014 | Ships and marine technology. Marine NOx reduction agent AUS 40 Test methods |
02/102699 DC : DRAFT MAY 2002 | PREN 14418 - GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF FREEZING-THAWING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
BS 7825-3.1:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Thermal properties |
DIN ISO 15923-1:2014-07 | WATER QUALITY - DETERMINATION OF SELECTED PARAMETERS BY DISCRETE ANALYSIS SYSTEMS - PART 1: AMMONIUM, NITRATE, NITRITE, CHLORIDE, ORTHOPHOSPHATE, SULFATE AND SILICATE WITH PHOTOMETRIC DETECTION (ISO 15923-1:2013) |
ISO 2599:2003 | Iron ores — Determination of phosphorus content — Titrimetric method |
05/30116635 DC : DRAFT APR 2005 | BS ISO 12739 - ZINC SULFIDE CONCENTRATES - DETERMINATION OF ZINC CONTENT - IONEXCHANGE/EDTA TITRIMETRIC METHOD |
06/30160065 DC : 0 | BS EN ISO 11143 ED 2 - DENTAL EQUIPMENT - AMALGAM SEPARATORS |
BS ISO 20843 : 2003 AMD 15160 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CATEGORIES HFAE, HFAS AND HFC |
03/106266 DC : DRAFT APR 2003 | BS EN 14671 - CHARACTERISATION OF SLUDGES - PRE-TREATMENT FOR THE DETERMINATION OF EXTRACTABLE AMMONIA USING 2 MOL/L POTASSIUM CHLORIDE |
04/30108530 DC : DRAFT JAN 2004 | EN 14880 - SURFACE ACTIVE AGENTS - DETERMINATION OF INORGANIC SULFATE CONTENT IN ANIONIC SURFACE ACTIVE AGENTS - POTENTIOMETRIC LEAD SELECTIVE ELECTRODE TITRATION METHOD |
BS EN ISO 16266:2008 | Water quality. Detection and enumeration of Pseudomonas aeruginosa. Method by membrane filtration |
ONORM EN ISO 11127-3 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 3: DETERMINATION OF APPARENT DENSITY (ISO 11127-3:2011) |
02/712197 DC : DRAFT DEC 2002 | EN 1785 - FOODSTUFFS - DETECTION OF IRRADIATED FOOD CONTAINING FAT - GAS CHROMATOGRAPHIC/MASS SPECTROMETRIC ANALYSIS OF 2-ALKYLCYCLOBUTANONES |
12/30258185 DC : 0 | BS EN 12124 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM SULFITE |
DIN EN 15692:2009-08 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method |
04/19988928 DC : DRAFT AUG 2004 | EN 4158 - AEROSPACE SERIES - MEASUREMENT OF ELECTRICAL RESISTANCE OF CONDUCTIVE LAYERS |
12/30258770 DC : 0 | BS EN 12822 - FOODSTUFFS - DETERMINATION OF VITAMIN E BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MEASUREMENT OF ALFA-, BETA-, GAMMA- AND DELTA- TOCOPHEROLS |
BS EN ISO 5667-15:2009 | Water quality. Sampling Guidance on the preservation and handling of sludge and sediment samples |
BS EN ISO 10416:2009 | Petroleum and natural gas industries. Drilling fluids. Laboratory testing |
BS ISO 11262:2011 | Soil quality. Determination of total cyanide |
14/30283358 DC : 0 | BS EN ISO 19071 - LEATHER - CHEMICAL TESTS - DETERMINATION OF CHROMIUM (6) AND THE REDUCTIVE POTENTIAL FOR CHROMIUM TANNING AGENTS |
00/562030 DC : DRAFT MAY 2000 | ISO 17190-6 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 6: GRAVIMETRIC DETERMINATION OF FLUID RETENTION CAPACITY IN SALINE AFTER CENTRIFUGATION |
DIN EN 10361:2016-02 | ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
13/30267713 DC : 0 | BS ISO 18184 - TEXTILES - DETERMINATION OF ANTIVIRAL ACTIVITY ASSAY OF TEXTILE PRODUCTS |
BS 3900-B5:1986 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Preparation of acid extracts from liquid paints or coating powders |
03/313984 DC : DRAFT NOV 2003 | EN 1211 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POTASSIUM TRIPOLYPHOSPHATE |
IP 292 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS |
BS 6782-12.1(2004) : 2004 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE - PART 1: VISUAL METHOD |
10/30213003 DC : 0 | BS EN 15411 - SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN) |
BS ISO 17289:2014 | Water quality. Determination of dissolved oxygen. Optical sensor method |
13/30290089 DC : 0 | IEC 62321 2ND EDITION - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 8: PHTHALATES IN POLYMERS BY PYROLYZER GAS CHROMATOGRAPHY-MASS SPECTROMETRY (PY-GC-MS), ION ATTACHMENT MASS SPECTROMETRY (IAMS), GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) AND LIQUID CHROMATOGRAPHY - MASS SPECTROMETRY (LC-MS) |
04/30031742 DC : 0 | BS ISO 20280 - SOIL QUALITY - DETERMINATION OF ARSENIC, ANTIMONY AND SELENIUM IN AQUA REGIA SOIL EXTRACTS WITH ELECTROTHERMAL OR HYDRIDEGENERATION ATOMIC ABSORPTION SPECTROMETRY |
ISO 5398-3:2007 | Leather Chemical determination of chromic oxide content Part 3: Quantification by atomic absorption spectrometry |
17/30361497 DC : 0 | BS EN ISO 2812-5 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
BS EN 16852:2017 | Foodstuffs. Determination of ethyl carbamate in stone fruit spirits, fruit marc spirits and other spirit drinks. GC-MS method |
15/30296386 DC : 0 | BS EN ISO 9626 - STAINLESS STEEL NEEDLE TUBING FOR THE MANUFACTURE OF MEDICAL DEVICES - REQUIREMENTS AND TEST METHODS |
10/30205520 DC : 0 | BS EN 16144 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD |
DIN EN 16693:2015-12 | WATER QUALITY - DETERMINATION OF ORGANOCHLORINE PESTICIDES (OCP) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
09/30197132 DC : 0 | BS EN 15911 - FOODSTUFFS - SIMULTANEOUS DETERMINATION OF NINE SWEETENERS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY AND EVAPORATIVE LIGHT SCATTERING DETECTION |
08/30179326 DC : DRAFT JUNE 2008 | BS EN 15561 - FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN CALCIUM CYANAMIDE CONTAINING NITRATES |
BS 7755-5.4:1998 | Soil quality. Physical methods Method by sieving and sedimentation |
ISO 14378:2009 | Milk and dried milk Determination of iodide content Method using high-performance liquid chromatography |
I.S. EN ISO 648:2008 | LABORATORY GLASSWARE - SINGLE-VOLUME PIPETTES |
I.S. EN ISO 10703:2015 | WATER QUALITY - DETERMINATION OF THE ACTIVITY CONCENTRATION OF RADIONUCLIDES - METHOD BY HIGH RESOLUTION GAMMA-RAY SPECTROMETRY (ISO 10703:2007) |
11/30215667 DC : 0 | BS ISO 14189 - WATER QUALITY - DETECTION AND ENUMERATION OF CLOSTRIDIUM PERFRINGENS - METHOD USING MEMBRANE FILTRATION |
DIN EN 15558:2009-06 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO ULSCH |
15/30328781 DC : 0 | BS EN 13256 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES |
BS ISO 11498 : 1997 AMD 10705 | DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRIC MOTORS |
DIN EN ISO 28888:2014-02 | DENTISTRY - SCREENING METHOD FOR EROSION POTENTIAL OF ORAL RINSES ON DENTAL HARD TISSUES (ISO 28888:2013) |
PD CEN/TR 15314:2006 | Durability of wood and wood-based products. Quantitative determination of quaternary ammonium compounds in wood |
13/30246093 DC : 0 | BS ISO 16960 - NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS - DETERMINATION OF TOTAL SULFUR BY OXIDATIVE MICROCOULOMETRY METHOD |
16/30302158 DC : 0 | BS EN 1568-1 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 1: SPECIFICATION FOR MEDIUM EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
15/30293517 DC : 0 | BS EN ISO 14362-3 - TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 3: DETECTION OF THE USE OF CERTAIN AZO COLORANTS, WHICH MAY RELEASE 4- AMINOAZOBENZENE |
13/30234129 DC : 0 | BS EN ISO 16198 - SOIL QUALITY - PLANT-BASED BIOTEST TO ASSESS THE ENVIRONMENTAL BIOAVAILABILITY OF TRACE ELEMENTS TO PLANTS |
S.R. CEN/TS 16170:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ELEMENTS USING INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
I.S. EN 152:2011 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS OF A PRESERVATIVE TREATMENT AGAINST BLUE STAIN IN WOOD IN SERVICE - LABORATORY METHOD |
DIN ISO 22634:2012-01 | Cigarettes - Determination of benzo[a]pyrene in cigarette mainstream smoke - Method using gas chromatography/mass spectrometry (ISO 22634:2008) |
13/30273898 DC : 0 | BS EN 12594 - BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
16/30344580 DC : 0 | BS EN ISO 6270-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 1: CONDENSATION (SINGLE-SIDED EXPOSURE) |
11/30250451 DC : 0 | BS ISO 16632 - TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF WATER CONTENT - GAS-CHROMATOGRAPHIC METHOD |
BS EN ISO 5529:2010 | Wheat. Determination of the sedimentation index. Zeleny test |
04/30043823 DC : DRAFT JUNE 2004 | ISO 20126 - DENTISTRY - PHYSICAL PROPERTIES OF MANUAL TOOTHBRUSHES |
DIN EN ISO 15181-6:2014-09 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 6: DETERMINATION OF TRALOPYRIL RELEASE RATE BY QUANTITATION OF ITS DEGRADATION PRODUCT IN THE EXTRACT (ISO 15181-6:2012) |
BS ISO 12078:2006 | Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Reference method) |
BS ISO 26062:2010 | Nuclear technology. Nuclear fuels. Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry |
15/30317854 DC : 0 | BS EN 16847 - FERTILIZERS - DETERMINATION OF COMPLEXING AGENTS IN FERTILIZERS - IDENTIFICATION OF HEPTAGLUCONIC ACID BY CHROMATOGRAPHY |
ISO 1999:2013 | Acoustics Estimation of noise-induced hearing loss |
07/30163680 DC : 0 | BS EN 14164 - FOODSTUFFS - DETERMINATION OF VITAMIN B6 BY HPLC |
16/30298307 DC : 0 | BS EN ISO 19448 - DENTISTRY - ANALYSIS OF FLUORIDE CONCENTRATION IN AQUEOUS SOLUTIONS BY USE OF FLUORIDE-ION SELECTIVE ELECTRODE |
BS ISO 22032 : 2006 | WATER QUALITY - DETERMINATION OF SELECTED POLYBROMINATED DIPHENYL ETHERS IN SEDIMENT AND SEWAGE SLUDGE - METHOD USING EXTRACTION AND GAS CHROMATOGRAPHY/MASS SPECTROMETRY |
15/30287670 DC : 0 | BS ISO 17951-2 - WATER QUALITY - DETERMINATION OF FLUORIDE USING FLOW ANALYSIS (FIA AND CFA) - PART 2: METHOD USING CONTINUOUS FLOW ANALYSIS (CFA) WITH AUTOMATED IN-LINE DISTILLATION |
DIN EN ISO 3826-4:2015-12 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 4: APHAERESIS BLOOD BAG SYSTEMS WITH INTEGRATED FEATURES (ISO 3826-4:2015) |
BS ISO 2599:2003 | Iron ores. Determination of phosphorus content. Titrimetric method |
PREN 12823-1 : DRAFT 2012 | FOODSTUFFS - DETERMINATION OF VITAMIN A BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - PART 1: MEASUREMENTS OF ALL-TRANS-RETINOL AND 13-CIS-RETINOL |
BS EN 60661:2014 | Methods for measuring the performance of electric household coffee makers |
PREN 14164 : DRAFT 2012 | FOODSTUFFS - DETERMINATION OF VITAMIN B6 BY HPLC |
BS ISO 1409:2006 | Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method |
04/30123309 DC : DRAFT OCT 2004 | EN ISO 12014-4 - FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 4: ION-EXCHANGE CHROMATOGRAPHIC (IC) METHOD FOR THE DETERMINATION OF NITRATE AND NITRITE CONTENT OF MEAT PRODUCTS |
ISO 14932:2012 | Rubber compounding ingredients — Organic vulcanizing agents — Determination of organic peroxide content |
14/30297754 DC : 0 | BS EN ISO 16408 - DENTISTRY - ORAL HYGIENE PRODUCTS - ORAL RINSES |
08/30179319 DC : DRAFT JUNE 2008 | BS EN 15559 - FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO ARND |
NF EN ISO 18857-2 : 2012 | WATER QUALITY - DETERMINATION OF SELECTED ALKYLPHENOLS - PART 2: GAS CHROMATOGRAPHIC-MASS SPECTROMETRIC DETERMINATION OF ALKYLPHENOLS, THEIR ETHOXYLATES AND BISPHENOL A IN NON-FILTERED SAMPLES FOLLOWING SOLID-PHASE EXTRACTION AND DERIVATISATION |
10/30235106 DC : 0 | BS EN ISO 11640 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING |
BS EN 20105-A01:1993 | Textiles. Tests for colour fastness General principles of testing |
16/30300851 DC : 0 | BS ISO 19563 - DETERMINATION OF THEANINE IN TEA AND INSTANT TEA IN SOLID FORM USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
BS EN 16187:2015 | Foodstuffs. Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection after pre-column derivatisation |
BS ISO 14900:2017 | Plastics. Polyols for use in the production of polyurethane. Determination of hydroxyl number |
DIN EN 15704:2009-06 | LIMING MATERIALS - DETERMINATION OF THE BREAKDOWN OF GRANULATED CALCIUM AND CALCIUM/MAGNESIUM CARBONATES UNDER THE INFLUENCE OF WATER |
12/30255203 DC : 0 | BS ISO 16560 - SURFACE ACTIVE AGENTS (NON-IONIC) - DETERMINATION OF POLYETHYLENE GLYCOLS IN NONIONIC ETHYLENE-OXIDE-SURFACTANTS - HPLC METHOD |
I.S. EN ISO 4619:2010 | DRIERS FOR PAINTS AND VARNISHES |
DIN EN ISO 17072-1:2011-06 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
BS ISO 21263:2017 | Slow-release fertilizers. Determination of the release of the nutrients. Method for coated fertilizers |
02/561373 DC : DRAFT MAR 2002 | BS EN ISO 12870 - OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS |
04/30116289 DC : DRAFT JUL 2004 | ISO 10378 - COPPER, LEAD AND ZINC SULFIDE CONCENTRATES - DETERMINATION OF GOLD AND SILVER CONTENTS - FIRE ASSAY GRAVIMETRIC AND FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
12/30258729 DC : 0 | BS EN 15721 - ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
14/30267874 DC : 0 | BS EN 16801 - FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - DETERMINATION OF METHYLMERCURY BY ISOTOPE DILUTION GC-ICPMS IN FOODSTUFFS OF MARINE ORIGIN |
DIN EN 15479:2009-04 | FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
10/30197644 DC : 0 | BS ISO 7203-2 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 2: SPECIFICATION FOR MEDIUM AND HIGH EXPANSION FOAM CONCENTRATES FOR TOP APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
BS EN ISO 17072-2:2011 | Leather. Chemical determination of metal content Total metal content |
ONORM EN ISO 5398-4 : 2007 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 4: QUANTIFICATION BY INDUCTIVELY COUPLED PLASMA - OPTICAL EMISSION SPECTROMETER (ICP-OES) |
ISO 12914:2012 | Soil quality — Microwave-assisted extraction of the aqua regia soluble fraction for the determination of elements |
DIN EN 15608:2008-08 | SURFACE ACTIVE AGENTS - QUANTITATIVE DETERMINATION OF FREE FATTY ACID IN ALKYLAMIDOPROPYLBETAINES - GAS-CHROMATOGRAPHIC METHOD |
10/30199136 DC : 0 | BS ISO 11916-1 - SOIL QUALITY - DETERMINATION OF SELECTED EXPLOSIVE COMPOUNDS - PART 1: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) WITH ULTRAVIOLET DETECTION |
11/30236375 DC : 0 | BS EN 13752 - PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MANGANESE DIOXIDE |
10/30200748 DC : 0 | BS ISO 13160 - WATER QUALITY - MEASUREMENT OF STRONTIUM 90 AND STRONTIUM 89 |
DD ISO/TS 13899-3:2005 | Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method Determination of W content |
95/710266 DC : 0 | ISO/DIS 10153 - STEEL - DETERMINATION OF BORON CONTENT - CURCUMIN SPECTROPHOTOMETRIC METHOD |
DIN EN ISO 16373-2 E : 2014 | TEXTILES - DYESTUFFS - PART 2: GENERAL METHOD FOR THE DETERMINATION OF EXTRACTABLE DYESTUFFS INCLUDING ALLERGENIC AND CARCINOGENIC DYESTUFFS (METHOD USING PYRIDINE-WATER) (ISO 16373-2:2014) |
09/30199120 DC : 0 | BS EN ISO 17072-1 - LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
BS EN ISO 28706-1:2011 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by acids at room temperature |
BS 7079-B11(2006) : 2006 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 11: FIELD METHOD FOR THE TURBIDIMETRIC DETERMINATION OF WATER-SOLUBLE SULFATE |
DIN EN 15626:2016-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
I.S. EN ISO 19020:2017 | MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR THE IMMUNOENZYMATIC DETECTION OF STAPHYLOCOCCAL ENTEROTOXINS IN FOODSTUFFS (ISO 19020:2017) |
NF EN 62554 : 2012 | SAMPLE PREPARATION FOR MEASUREMENT OF MERCURY LEVEL IN FLUORESCENT LAMPS |
BS EN 15039:2014 | Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polycarboxilic acids and salts |
BS EN ISO 4920:2012 | Textile fabrics. Determination of resistance to surface wetting (spray test) |
BS 5766-25(2001) : 2001 | ANIMAL FEEDING STUFFS - DETERMINATION OF THE CONTENTS OF CALCIUM, COPPER, IRON, MAGNESIUM, POTASSIUM, SODIUM AND ZINC - METHOD USING ATOMIC ABSORPTION SPECTROMETRY |
BS EN 12014-2:2017 | Foodstuffs. Determination of nitrate and/or nitrite content HPLC/IC method for the determination of nitrate content of vegetables and vegetable products |
ISO 15593:2001 | Environmental tobacco smoke — Estimation of its contribution to respirable suspended particles — Determination of particulate matter by ultraviolet absorbance and by fluorescence |
DD CEN/TS 15560:2007 | Fertilizers. Determination of total nitrogen in calcium cyanamide nitrate free |
DIN EN ISO 17852:2008-04 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC FLUORESCENCE SPECTROMETRY |
BS ISO 8518:2001 | Workplace air. Determination of particulate lead and lead compounds. Flame or electrothermal atomic absorption spectrometric method |
13/30277083 DC : 0 | BS EN 118 - WOOD PRESERVATIVES - DETERMINATION OF PREVENTIVE ACTION AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
BS 6068-2.91(2004) : 2004 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
BS ISO 27871:2011 | Cheese and processed cheese. Determination of the nitrogenous fractions |
BS EN ISO 4623-1:2002 | Paints and varnishes. Determination of resistance to filiform corrosion Steel substrates |
DIN EN ISO 4098:2016-10 (Draft) | LEATHER - CHEMICAL TESTS - DETERMINATION OF WATER-SOLUBLE MATTER, WATER SOLUBLE INORGANIC MATTER AND WATER-SOLUBLE ORGANIC MATTER |
08/30178957 DC : DRAFT FEB 2008 | BS ISO 3771/BS 2000-276 - PETROLEUM PRODUCTS - DETERMINATION OF BASE NUMBER - PERCHLORIC ACID POTENTIOMETRIC TITRATION METHOD |
BS EN 2434-004:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish High flexibility |
DD CEN/TS 16233-1:2011 | Foodstuffs. HPLC method for the determination of xanthophylls in fish flesh Determination of astaxanthin and canthaxanthin |
09/30178949 DC : 0 | BS ISO 4802-2 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 2: DETERMINATION BY FLAME SPECTROMETRY AND CLASSIFICATION |
10/30199307 DC : DRAFT DEC 2010 | BS EN ISO 12782-3 - SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIFICATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 3: EXTRACTION OF ALUMINIUM OXIDES AND HYDROXIDES WITH AMMONIUM OXALATE/OXALIC ACID |
BS ISO 2597-1:2006 | Iron ores. Determination of total iron content Titrimetric method after tin (II) chloride reduction |
I.S. CEN ISO TS 17226:2003 | LEATHER - CHEMICAL TESTS - DETERMINATION OF FORMALDEHYDE CONTENT |
12/30258188 DC : 0 | BS EN 12126 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - LIQUEFIED AMMONIA |
BS ISO 16604:2004 | Clothing for protection against contact with blood and body fluids. Determination of resistance of protective clothing materials to penetration by blood-borne pathogens. Test method using Phi-X174 Bacteriophage |
I.S. EN ISO 1248:2008 | IRON OXIDE PIGMENTS - SPECIFICATIONS AND METHODS OF TEST |
PREN 14152 : DRAFT 2012 | FOODSTUFFS - DETERMINATION OF VITAMIN B2 BY HPLC |
10/30240064 DC : DRAFT DEC 2010 | BS ISO 9308-2 - WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 2: MOST PROBABLE NUMBER METHOD |
BS EN 15477:2009 | Fertilizers. Determination of the water-soluble potassium content |
BS 5766-24(2001) : 2001 | ANIMAL FEEDING STUFFS - DETERMINATION OF VITAMIN E CONTENT - METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
07/30173727 DC : 0 | BS ISO/DIS 19250 - WATER QUALITY - DETERMINATION OF SALMONELLA SPECIES |
BS EN ISO 5398-1:2007 | Leather. Chemical determination of chromic oxide content Quantification by titration |
BS EN ISO 4787:2011 | Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use |
BS ISO 17058:2004 | Steel and iron. Determination of arsenic content. Spectrophotometric method |
10/30199310 DC : DRAFT DEC 2010 | BS EN ISO 12782-4 - SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIFICATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 4: EXTRACTION OF HUMIC SUBSTANCES FROM SOLID SAMPLES |
BS ISO 17378-1:2014 | Water quality. Determination of arsenic and antimony Method using hydride generation atomic fluorescence spectrometry (HG-AFS) |
BS EN 152:2011 | Wood preservatives. Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service. Laboratory method |
PD ISO/TS 16965:2013 | Soil quality. Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS) |
BS EN 4195:2011 | Aerospace series. Paints and varnishes. Test method for determination of chromate leaching |
17/30350521 DC : 0 | BS EN ISO 7886-4 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 4: SYRINGES WITH RE-USE PREVENTION FEATURE |
98/705335 DC : DRAFT MAR 1998 | ISO/CD 15329 - CORROSION OF METALS AND ALLOYS - ANODIC TEST FOR INTERGRANULAR CORROSION SUSCEPTIBILITY OF HEAT-TREATABLE ALUMINIUM ALLOYS |
DD CEN/TS 15451:2006 | Fertilizers. Determination of chelating agents. Determination of iron chelated by EDDHSA by ion pair chromatography |
BS EN 16159:2012 | Animal feeding stuffs. Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) |
15/30272439 DC : 0 | BS EN 16852 - FOODSTUFFS - DETERMINATION OF ETHYL CARBAMATE IN STONE FRUIT SPIRITS, FRUIT MARC SPIRITS AND OTHER SPIRIT DRINKS - GC-MS METHOD |
16/30342876 DC : 0 | BS EN 15550 - ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
99/702672 DC : DRAFT JAN 1999 | PREN ISO 6867 - ANIMAL FEEDING STUFFS - DETERMINATION OF VITAMIN E CONTENT - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
11/30244423 DC : 0 | BS ISO 14222 - SPACE ENVIRONMENT (NATURAL AND ARTIFICIAL) - EARTH UPPER ATMOSPHERE |
PD ISO/TS 15923-2:2017 | Water quality. Determination of selected parameters by discrete analysis systems Chromium(VI), fluoride, total alkalinity, total hardness, calcium, magnesium, iron, iron(II), manganese and aluminium with photometric detection |
BS 6200-3.11.3:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of cobalt Flame atomic absorption spectrometric method |
17/30312516 DC : 0 | BS EN ISO 4945 - STEEL - DETERMINATION OF NITROGEN - SPECTROPHOTOMETRIC METHOD |
07/30171559 DC : 0 | BS EN 15451 - FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY EDDHSA BY ION PAIR CHROMATOGRAPHY |
BS ISO 18074:2015 | Textiles. Identification of some animal fibres by DNA analysis method. Cashmere, wool, yak and their blends |
15/30315060 DC : 0 | BS EN 49-2 - WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST ANOBIUM PUNCTATUM (DE GEER) BY EGG-LAYING AND LARVAL SURVIVAL - PART 2: APPLICATION BY IMPREGNATION (LABORATORY METHOD) |
12/30266392 DC : 0 | BS EN ISO 20795-1 - DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS |
PREN 13368-1 : DRAFT 2012 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS IN FERTILIZERS BY CHROMATOGRAPHY - PART 1: DETERMINATION OF EDTA, HEEDTA AND DTPA BY ION CHROMATOGRAPHY |
BS EN 839:2014 | Wood preservatives. Determination of the protective effectiveness against wood destroying basidiomycetes. Application by surface treatment |
12/30266398 DC : 0 | BS EN ISO 20795-2 - DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS |
BS EN 4159:2011 | Aerospace series. Paints and Varnishes. Determination of resistance to microbial growth |
17/30360626 DC : 0 | BS EN ISO 17226-1 - LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 1: METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
BS EN ISO 15329:2008 | Corrosion of metals and alloys. Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys |
BS EN ISO 11846:2008 | Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat- treatable aluminium alloys |
DIN EN ISO 28706-4:2016-07 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL (ISO 28706-4:2016) |
06/30155673 DC : DRAFT SEP 2006 | ISO 22962 - TITANIUM AND TITANIUM ALLOYS - DETERMINATION OF IRON - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY |
12/30212156 DC : 0 | BS EN 13138-3:2007 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
DIN EN 16847:2016-05 | FERTILIZERS - DETERMINATION OF COMPLEXING AGENTS IN FERTILIZERS - IDENTIFICATION OF HEPTAGLUCONIC ACID BY CHROMATOGRAPHY |
UNI EN 15451 : 2008 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY EDDHSA BY ION PAIR CHROMATOGRAPHY |
UNE-EN ISO 8623:2016 | Tall-oil fatty acids for paints and varnishes - Test methods and characteristic values (ISO 8623:2015) |
BS ISO 9697 : 2015 | WATER QUALITY - GROSS BETA ACTIVITY IN NON-SALINE WATER - TEST METHOD USING THICK SOURCE |
06/30154825 DC : DRAFT AUG 2006 | ISO 20481 - COFFEE AND COFFEE PRODUCTS - DETERMINATION OF CAFFEINE CONTENT BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) (RAPID METHOD) |
BS ISO 5416:2006 | Direct reduced iron. Determination of metallic iron. Bromine-methanol titrimetric method |
BS 2000-136.1(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF SAPONIFICATION NUMBER - COLOUR-INDICATOR TITRATION METHOD |
BS ISO 18321:2015 | Essential oils. Determination of peroxide value |
DIN EN 16317:2013-12 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
BS EN ISO 27108:2013 | Water quality. Determination of selected plant treatment agents and biocide products. Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) |
17/30360617 DC : 0 | BS EN ISO 5398-4 - LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 4: QUANTIFICATION BY INDUCTIVELY COUPLED PLASMA (ICP) |
09/30172818 DC : 0 | BS ISO 15320 - PAPER, BOARD AND PULPS - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT |
15/30331502 DC : DRAFT DEC 2015 | BS EN ISO 9696 - WATER QUALITY - MEASUREMENT OF GROSS ALPHA ACTIVITY IN NON-SALINE WATER - THICK SOURCE METHOD |
UNI EN 15829 : 2010 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CURRANTS, RAISINS, SULTANAS, MIXED DRIED FRUIT AND DRIED FIGS - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
17/30349869 DC : 0 | BS ISO 20596-1 - WATER QUALITY - DETERMINATION OF CYCLIC VOLATILE METHYLSILOXANES IN WATER - PART 1: METHOD USING PURGE AND TRAP WITH GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
BS ISO 4802-1:2016 | Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by titration method and classification |
03/113238 DC : DRAFT SEP 2003 | BS ISO 15028 - PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF HYDROLYSABLE CHLORINE |
BS ISO 22036:2008 | Soil quality. Determination of trace elements in extracts of soil by inductively coupled plasma-atomic emission spectrometry (ICP-AES) |
BS EN 15791:2009 | Foodstuffs. Determination of deoxynivalenol in animal feed. HPLC method with immunoaffinity column clean-up |
BS EN 15451:2008 | Fertilizers. Determination of chelating agents. Determination of iron chelated by EDDHSA by ion pair chromatography |
BS ISO 19701:2013 | Methods for sampling and analysis of fire effluents |
ISO 18073:2004 | Water quality — Determination of tetra- to octa-chlorinated dioxins and furans — Method using isotope dilution HRGC/HRMS |
08/30186890 DC : DRAFT OCT 2008 | BS EN 12490 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - PRESERVATIVE-TREATED SOLID WOOD - DETERMINATION OF THE PENETRATION AND RETENTION OF CREOSOTE IN TREATED WOOD |
06/30150050 DC : DRAFT MAY 2006 | ISO 20541 - MILK AND MILK PRODUCTS - DETERMINATION OF NITRATE CONTENT - METHOD USING ENZYMATIC REDUCTION AND MOLECULAR ABSORPTION SPECTROMETRY AFTER GRIESS REACTION |
BS EN 15559:2009 | Fertilizers. Determination of nitric and ammoniacal nitrogen according to Arnd |
BS EN 15607:2009 | Foodstuffs. Determination of d-biotin by HPLC |
AAMI ID26:2004 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
BS 6068-2.78(2002) : 2002 | WATER QUALITY - DETERMINATION OF SOLUBLE SILICATES BY FLOW ANALYSIS (FIA AND CFA) AND PHOTOMETRIC DETECTION |
BS ISO 6296:2000 | Methods of test for petroleum and its products. Petroleum product. Determination of water. Potentiometric Karl Fischer titration method |
07/30143351 DC : 0 | BS ISO 26149 - WATER QUALITY - DETERMINATION OF PH |
BS 7208-11(1998) : 1998 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - SALINE SOLUTION FOR CONTACT LENS TESTING |
08/30181649 DC : DRAFT JULY 2008 | BS EN 15837 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC DIRECT METHOD |
PD CEN/TR 14823:2003 | Durability of wood and wood-based products. Quantitative determination of pentachlorophenol in wood. Gas chromatographic method |
BS ISO 16784-2 : 2006 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG |
ISO 18069:2015 | Corrosion of metals and alloys Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids |
BS EN 15561:2009 | Fertilizers. Determination of total nitrogen in calcium cyanamide containing nitrates |
BS 6068-4.7(1989) : 1989 | WATER QUALITY - MICROBIOLOGICAL METHODS - DETECTION AND ENUMERATION OF PSEUDOMONAS AERUGINOSA BY MEMBRANE FILTRATION |
BS ISO 14502-1:2005 | Determination of substances characteristic of green and black tea Content of total polyphenols in tea. Colorimetric method using Folin-Ciocalteu reagent |
07/30171562 DC : 0 | BS EN 15452 - FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY O,P- EDDHA BY REVERSED PHASE HPLC |
BS 6068-2.77(2002) : 2002 | WATER QUALITY - DIGESTION FOR THE DETERMINATION OF SELECTED ELEMENTS IN WATER - NITRIC ACID DIGESTION |
BS ISO 11948-1:1996 | Urine-absorbing aids Whole-product testing |
DD ISO/TS 6733:2006 | Milk and milk products. Determination of lead content. Graphite furnace atomic absorption spectrometric method |
02/712196 DC : DRAFT DEC 2002 | EN 1784 - FOODSTUFFS - DETECTION OF IRRADIATED FOOD CONTAINING FAT - GAS CHROMATOGRAPHIC ANALYSIS OF HYDROCARBONS |
03/300327 DC : DRAFT MAR 2003 | BS ISO 18857-1 - WATER QUALITY - DETERMINATION OF SELECTED ALKYLPHENOLS - PART 1: METHOD FOR NON-FILTERED SAMPLES USING LIQUID EXTRACTION AND GAS CHROMATOGRAPHY WITH MASS SELECTIVE DETECTION |
04/30113958 DC : DRAFT JUN 2004 | ISO/DIS 3071 - TEXTILES - DETERMINATION OF PH OF AQUEOUS EXTRACT |
BS EN ISO 17852:2008 | Water quality. Determination of mercury. Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry |
06/30147357 DC : DRAFT MAR 2006 | EN 15488 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD |
03/313973 DC : DRAFT NOV 2003 | EN 1200 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - TRISODIUM ORTHOPHOSPHATE |
BS 6068-2.90(2004) : 2004 | WATER QUALITY - DETERMINATION OF TETRA- TO OCTA-CHLORINATED DIOXINS AND FURANS - METHOD USING ISOTOPE DILUTION HRGC/HRMS |
DIN EN ISO 7783:2012-02 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011) |
BS 3900-F17(1998) : 1998 AMD 13281 | METHODS OF TEST FOR PAINTS - DETERMINATION OF WET-SCRUB RESISTANCE AND CLEANABILITY OF COATINGS |
UNE-EN 16328:2013 | Fertilizers - Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP) - Method using high-performance liquid chromatography (HPLC) |
DD CEN/TS 15412:2010 | Solid recovered fuels. Methods for the determination of metallic aluminium |
07/30163069 DC : 0 | BS EN 14123 - FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] AND THE SUM OF AFLATOXIN B[1], B[2], G[1] AND G[2] IN PEANUTS, PISTACHIOS, FIGS, AND PAPRIKA POWDER - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST-COLUMN DERIVATISATION AND IMMUNOAFFINITY COLUMN CLEANUP |
UNE-EN ISO 17698:2016 | Footwear - Test methods for uppers - Delamination resistance (ISO 17698:2016) |
DD CEN/TS 14997:2006 | Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with continuous pH-control |
I.S. EN ISO 5398-1:2007 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 1: QUANTIFICATION BY TITRATION |
UNI EN 15911 : 2010 | FOODSTUFFS - SIMULTANEOUS DETERMINATION OF NINE SWEETENERS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY AND EVAPORATIVE LIGHT SCATTERING DETECTION |
BS ISO 11438-1:1993 | Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method General requirements and sample dissolution |
BS ISO 13357-2:2017 | Petroleum products. Determination of the filterability of lubricating oils Procedure for dry oils |
09/30179897 DC : 0 | BS ISO 15192 - SOIL QUALITY - DETERMINATION OF CHROMIUM(6) IN SOLID MATERIAL BY ALKALINE DIGESTION AND ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION |
BS ISO 1952 : 2008 | SOLID MINERAL FUELS - DETERMINATION OF EXTRACTABLE METALS IN DILUTE HYDROCHLORIC ACID |
UNE-EN ISO 15091:2013 | Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012) |
07/30137646 DC : 0 | BS ISO 24293 - WATER QUALITY - DETERMINATION OF INDIVIDUAL ISOMERS OF NONYLPHENOL - METHOD USING SOLID PHASE EXTRACTION (SPE) AND GAS CHROMATOGRAPHY/MASS SPECTROMETRY (GC/MS) |
08/30181237 DC : DRAFT APR 2008 | BS EN ISO 21627-3 - PLASTICS - EPOXY RESINS - DETERMINATION OF CHLORINE CONTENT - PART 3: TOTAL CHLORINE |
UNI EN ISO 12782-5 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 5: EXTRACTION OF HUMIC SUBSTANCES FROM AQUEOUS SAMPLES |
09/30185156 DC : 0 | BS EN 1811 - REFERENCE TEST METHODS FOR RELEASE OF NICKEL FROM PRODUCTS INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN |
03/313981 DC : DRAFT NOV 2003 | EN 1207 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - TETRAPOTASSIUM PYROPHOSPHATE |
BS 6069-3.2:1991 | Characterization of air quality. Workplace atmospheres Method for the determination of particulate lead and lead compounds by flame atomic absorption spectrometry |
ISO 13658:2000 | Zinc sulfide concentrates Determination of zinc content Hydroxide precipitation and EDTA titrimetric method |
UNI CEN ISO/TS 21268-4 : 2010 | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 4: INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
BS 3900-K4(2008) : 2008 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 4: DETERMINATION OF PYRIDINETRIPHENYLBORANE (PTPB) CONCENTRATION IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
EN ISO 7886-4:2009 | Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO 7886-4:2006) |
UNI EN 16174 : 2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DIGESTION OF AQUA REGIA SOLUBLE FRACTIONS OF ELEMENTS |
BS ISO 20280:2007 | Soil quality. Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry |
BS ISO 13311:1997 | Iron ores. Determination of lead content. Flame atomic absorption spectrometric method |
02/122382 DC : DRAFT JUN 2002 | PREN 14456 - PRODUCTS USED FOR TREATMENT WATER INTENDED FOR HUMAN CONSUMPTION - BONE CHARCOAL |
05/30116666 DC : DRAFT MAR 2005 | BS ISO 5416 - DIRECT REDUCED IRON - DETERMINATION OF METALLIC IRON CONTENT - BROMINE-METHANOL TITRIMETRIC METHOD |
UNI EN 15039 : 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - POLYCARBOXILIC ACIDS AND SALTS |
UNI EN 15028 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORATE |
XP CEN ISO/TS 21268-1 : 2009 XP | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 1: BATCH TEST USING A LIQUID TO SOLID RATIO OF 2 L/KG DRY MATTER |
BS 2000-58(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
BS ISO 20595:2018 | Water quality. Determination of selected highly volatile organic compounds in water. Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS) |
EN 15192:2006 | Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
S.R. CEN/TS 16692:2015 | WATER QUALITY - DETERMINATION OF TRIBUTYLTIN (TBT) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE DISKS AND GAS CHROMATOGRAPHY WITH TRIPLE QUADRUPOLE MASS SPECTROMETRY |
I.S. EN ISO 12782-4:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 4: EXTRACTION OF HUMIC SUBSTANCES FROM SOLID SAMPLES (ISO 12782-4:2012) |
15/30317857 DC : 0 | BS EN 15477 - FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
UNE-EN 15829:2010 | Foodstuffs - Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit and dried figs - HPLC method with immunoaffinity column cleanup and fluorescence detection |
UNE-EN ISO 14362-1:2017 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres (ISO 14362-1:2017) |
UNE-EN ISO 14362-3:2017 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene (ISO 14362-3:2017) |
DIN EN ISO 21563:2013-12 | Dentistry - Hydrocolloid impression materials (ISO 21563:2013) |
I.S. EN 16421:2014 | INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
ISO 12078:2006 | Anhydrous milk fat Determination of sterol composition by gas liquid chromatography (Reference method) |
ISO 22303:2008 | Tobacco — Determination of tobacco specific nitrosamines — Method using buffer extraction |
CAN/CSA-Z5100-17 | Cellulose nanomaterials - Test methods for characterization |
DIN EN 10351:2011-05 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
DIN EN ISO 13161:2016-01 | Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011) |
UNE-EN ISO 16373-1:2016 | Textiles - Dyestuffs - Part 1: General principles of testing coloured textiles for dyestuff identification (ISO 16373-1:2015) |
I.S. EN ISO 14403-1:2012 | WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE USING FLOW ANALYSIS (FIA AND CFA) - PART 1: METHOD USING FLOW INJECTION ANALYSIS (FIA) (ISO 14403-1:2012) |
S.R. CEN TS 15560:2007 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN CALCIUM CYANAMIDE NITRATE FREE |
DIN EN 16187:2015-09 | FOODSTUFFS - DETERMINATION OF FUMONISIN B[1] AND FUMONISIN B[2] IN PROCESSED MAIZE CONTAINING FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION AFTER PRECOLUMN DERIVATIZATION |
UNE-EN ISO 4946:2016 | Steel and cast iron - Determination of copper - 2,2'-Biquinoline spectrophotometric method (ISO 4946:2016) |
BS 2000-412(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS |
ISO 9683-1:2006 | Iron ores Determination of vanadium Part 1: BPHA spectrophotometric method |
NF ISO 13161 : 2011 | WATER QUALITY - MEASUREMENT OF POLONIUM 210 ACTIVITY CONCENTRATION IN WATER BY ALPHA SPECTROMETRY |
ISO/TS 9941:2005 | Milk and canned evaporated milk — Determination of tin content — Spectrometric method |
ISO 18325:2015 | Geosynthetics Test method for the determination of water discharge capacity for prefabricated vertical drains |
I.S. EN ISO 27587:2009 | LEATHER - CHEMICAL TESTS - DETERMINATION OF THE FREE FORMALDEHYDE IN PROCESS AUXILIARIES |
I.S. EN 1911:2010 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF GASEOUS CHLORIDES EXPRESSED AS HCL - STANDARD REFERENCE METHOD |
EN ISO 4098:2006 | Leather - Chemical tests - Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter (ISO 4098:2006) |
PREN 4406 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE COATING - ABRASION RESISTANT |
S.R. CEN/TS 15119-2:2012 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DETERMINATION OF EMISSIONS FROM PRESERVATIVE TREATED WOOD TO THE ENVIRONMENT - PART 2: WOODEN COMMODITIES EXPOSED IN USE CLASS 4 OR 5 (IN CONTACT WITH THE GROUND, FRESH WATER OR SEA WATER) - LABORATORY METHOD |
I.S. EN ISO 11731:2017 | WATER QUALITY - ENUMERATION OF LEGIONELLA (ISO 11731:2017) |
I.S. EN ISO 1135-5:2015 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015) |
I.S. EN 16128:2015 | OPHTHALMIC OPTICS - REFERENCE METHOD FOR THE TESTING OF SPECTACLE FRAMES AND SUNGLASSES FOR NICKEL RELEASE |
ISO 22765:2016 | Nuclear fuel technology — Sintered (U,Pu)O2 pellets — Guidance for ceramographic preparation for microstructure examination |
ISO 20701:2017 | Leather — Tests for colour fastness — Colour fastness to saliva |
ISO 12830:2011 | Paper, board and pulps Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium |
ISO 2812-4:2017 | Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods |
ONORM EN ISO 5398-1 : 2007 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 1: QUANTIFICATION BY TITRATION |
15/30321242 DC : 0 | BS EN ISO 12870 - OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS |
I.S. EN 15410:2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI) |
I.S. EN ISO 12870:2014 | OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS (ISO 12870:2016) |
I.S. EN 16418:2014 | PAPER AND BOARD - DETERMINATION OF THE CYTOTOXICITY OF AQUEOUS EXTRACTS USING A METABOLICALLY COMPETENT HEPATOMA CELL LINE (HEPG[2]) |
I.S. EN ISO 2812-2:2007 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD |
ISO 11948-1:1996 | Urine-absorbing aids — Part 1: Whole-product testing |
ISO 17226-2:2008 | Leather Chemical determination of formaldehyde content Part 2: Method using colorimetric analysis |
ISO 17608:2015 | Textiles Bare elastane yarns Determination of resistance to chlorinated water (swimming-pool water) |
ISO 6467:2018 | Ferrovanadium — Determination of vanadium content — Potentiometric method |
I.S. EN 71-12:2016 | SAFETY OF TOYS - PART 12: N-NITROSAMINES AND N-NITROSATABLE SUBSTANCES |
ISO 13773:1997 | Rubber — Polychloroprene latex — Determination of alkalinity |
I.S. EN 15482:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM PERMANGANATE |
ISO 10136-4:1993 | Glass and glassware — Analysis of extract solutions — Part 4: Determination of aluminium oxide by molecular absorption spectrometry |
ISO 4802-1:2016 | Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification |
UNE-EN 1406:2010 | Chemicals used for treatment of water intended for human consumption - Modified starches |
ISO 16145-4:2013 | Ships and marine technology — Protective coatings and inspection method — Part 4: Automated measuring method for the total amount of water-soluble salts |
I.S. EN 2434-003:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 003: FLEXIBLE AND HIGH FLUID RESISTANCE FOR INTERIOR |
I.S. EN 16618:2015 | FOOD ANALYSIS - DETERMINATION OF ACRYLAMIDE IN FOOD BY LIQUID CHROMATOGRAPHY TANDEM MASS SPECTROMETRY (LC-ESI-MS/MS) |
I.S. EN 62321:2009 | ELECTROTECHNICAL PRODUCTS - DETERMINATION OF LEVELS OF SIX REGULATED SUBSTANCES (LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS, POLYBROMINATED DIPHENYL ETHERS) |
I.S. EN 1568-4:2018 | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 4: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-MISCIBLE LIQUIDS |
ISO 6668:2008 | Green coffee — Preparation of samples for use in sensory analysis |
UNI EN ISO 10270 : 2008 | CORROSION OF METALS AND ALLOYS - AQUEOUS CORROSION TESTING OF ZIRCONIUM ALLOYS FOR USE IN NUCLEAR POWER REACTORS |
ISO 11263:1994 | Soil quality — Determination of phosphorus — Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution |
ISO 11503:1995 | Paints and varnishes — Determination of resistance to humidity (intermittent condensation) |
I.S. EN 15933:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF PH |
PREN 890 : DRAFT 2010 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) SULFATE, LIQUID |
I.S. EN ISO 5529:2010 | WHEAT - DETERMINATION OF THE SEDIMENTATION INDEX - ZELENY TEST |
I.S. EN 13523-27:2017 | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
I.S. CEN TS 15360:2006 | FERTILIZERS - DETERMINATION OF DICYANDIAMIDE - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
I.S. EN ISO 11133:2014 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA (ISO/DIS 11133:2012) |
I.S. EN 16857:2017 | FOODSTUFFS - DETERMINATION OF BENZENE IN SOFT DRINKS, OTHER BEVERAGES AND VEGETABLE-BASED INFANT FOODS BY HEADSPACE GAS CHROMATOGRAPHY MASS SPECTROMETRY (HS-GC-MS) |
I.S. EN 60601-2-24:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-24: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFUSION PUMPS AND CONTROLLERS |
ISO/TS 12928:1999 | Lubricants, industrial oils and related products (class L) — Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications |
ISO/TS 19392-3:2018 | Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 3: Determination and evaluation of resistance to rain erosion using water jet |
I.S. EN 15837:2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
I.S. EN 15768:2015 | INFLUENCE OF MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - GC-MS IDENTIFICATION OF WATER LEACHABLE ORGANIC SUBSTANCES |
ISO 19730:2008 | Soil quality — Extraction of trace elements from soil using ammonium nitrate solution |
I.S. EN ISO 20863:2005 | FOOTWEAR - TEST METHODS FOR STIFFENERS AND TOEPUFFS - BONDABILITY (ISO 20863:2018) |
I.S. EN 12014-2:2017 | FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 2: HPLC/IC METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLE PRODUCTS |
I.S. EN 15475:2009 | FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
I.S. EN ISO 2812-4:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 4: SPOTTING METHODS (ISO 2812-4:2017) |
S.R. CEN TS 15705:2009 | FERTILIZERS - DETERMINATION OF UREA CONDENSATES USING HIGHPERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) - ISOBUTYLIDENEDIUREA AND CROTONYLIDENEDIUREA (METHOD A) AND METHYLEN-UREA OLIGOMERS (METHOD B) |
I.S. EN ISO 11704:2015 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD (ISO 11704:2010) |
UNI EN ISO 7783 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD |
I.S. EN ISO 4623-1:2002 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES |
I.S. EN ISO 5403-1:2011 | LEATHER - DETERMINATION OF WATER RESISTANCE OF FLEXIBLE LEATHER - PART 1: REPEATED LINEAR COMPRESSION (PENETROMETER) (ISO 5403-1:2011) |
I.S. EN 15950:2010 | FERTILIZERS - DETERMINATION OF N-(1,2-DICARBOXYETHYL)-D,L-ASPARTIC ACID (IMINODISUCCINIC ACID, IDHA) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
BS EN 16320 : 2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
ISO 17617:2014 | Textiles Determination of moisture drying rate |
ISO 5418-1:2006 | Iron ores Determination of copper Part 1: 2,2'-Biquinolyl spectrophotometric method |
ISO 15167:1999 | Petroleum products Determination of particulate content of middle distillate fuels Laboratory filtration method |
PREN 646 : DRAFT 2017 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD |
ISO 19563:2017 | Determination of theanine in tea and instant tea in solid form using high-performance liquid chromatography |
UNI EN 16155 : 2012 | FOODSTUFFS - DETERMINATION OF SUCRALOSE - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
UNI EN ISO 4920 : 2013 | TEXTILE FABRICS - DETERMINATION OF RESISTANCE TO SURFACE WETTING (SPRAY TEST) |
ISO 15237:2016 | Solid mineral fuels — Determination of total mercury content of coal |
BS EN ISO 9696:2017 | Water quality. Gross alpha activity. Test method using thick source |
ISO 5398-1:2007 | Leather Chemical determination of chromic oxide content Part 1: Quantification by titration |
ISO 13899-2:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of Nb content |
NF ISO 6495 : 2011 | ANIMAL FEEDING STUFFS - DETERMINATION OF WATER-SOLUBLE CHLORIDES CONTENT |
ISO 11813:2010 | Milk and milk products — Determination of zinc content — Flame atomic absorption spectrometric method |
ISO 18369-4:2017 | Ophthalmic optics — Contact lenses — Part 4: Physicochemical properties of contact lens materials |
ISO 11881:1999 | Corrosion of metals and alloys Exfoliation corrosion testing of aluminium alloys |
DIN EN ISO 20863:2015-08 (Draft) | FOOTWEAR - TEST METHOD FOR STIFFENERS AND TOEPUFFS - BONDABILITY |
ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
BS EN ISO 3104:1996 | Methods of test for petroleum and its products. Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity |
ISO 10477:2004 | Dentistry Polymer-based crown and bridge materials |
UNI EN ISO 12311 : 2013 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR |
ISO/TS 17951-2:2016 | Water quality — Determination of fluoride using flow analysis (FIA and CFA) — Part 2: Method using continuous flow analysis (CFA) with automated in-line distillation |
ISO 10727:2002 | Tea and instant tea in solid form — Determination of caffeine content — Method using high-performance liquid chromatography |
ISO 15625:2014 | Silk — Electronic test method for defects and evenness of raw silk |
BS EN 13368-2:2017 | Fertilizers. Determination of chelating agents in fertilizers by chromatography Determination of Fe chelated by [o,o] EDDHA, [o,o] EDDHMA and HBED, or the amount of chelating agents, by ion pair chromatography |
I.S. EN ISO 10270:2008 | CORROSION OF METALS AND ALLOYS - AQUEOUS CORROSION TESTING OF ZIRCONIUM ALLOYS FOR USE IN NUCLEAR POWER REACTORS |
BS EN ISO 11125-4:1997 | Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives Determination of apparent density |
ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
NF EN ISO 17071 : 2011 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FOGGING CHARACTERISTICS |
UNE-EN 16877:2017 | Animal feeding stuffs: Methods of sampling and analysis - Determination of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials and compound feed by LC-MS |
ISO 12183:2016 | Nuclear fuel technology — Controlled-potential coulometric assay of plutonium |
ISO/TS 16176:2011 | Rubber compounding ingredients Carbon black Determination of the aggregate-size distribution at ultimate dispersion |
IP 459-1 : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
ISO 4404:1998 | Petroleum and related products Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems |
I.S. EN 16277:2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF MERCURY BY COLD-VAPOUR ATOMIC ABSORPTION SPECTROMETRY (CVAAS) AFTER MICROWAVE PRESSURE DIGESTION (EXTRACTION WITH 65% NITRIC ACID AND 30% HYDROGEN PEROXIDE) |
ONORM EN ISO 14254 : 2011 | SOIL QUALITY - DETERMINATION OF EXCHANGEABLE ACIDITY IN BARIUM CHLORIDE EXTRACTS |
UNI EN ISO 11731-2 : 2008 | WATER QUALITY - DETECTION AND ENUMERATION OF LEGIONELLA - PART 2: DIRECT MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL COUNTS |
UNI EN 2434-004 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 004: HIGH FLEXIBILITY |
BS EN 13368-3:2017 | Fertilizers. Determination of chelating agents in fertilizers by chromatography Determination of [S,S]-EDDS by ion pair chromatography |
ISO/TS 17182:2014 | Soil quality — Determination of some selected phenols and chlorophenols — Gas chromatographic method with mass spectrometric detection |
UNI EN ISO 23161 : 2011 | SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD |
BS EN 71-12:2016 | Safety of toys N-Nitrosamines and N-nitrosatable substances |
BS EN ISO 14254:2011 | Soil quality. Determination of exchangeable acidity in barium chloride extracts |
ISO 10136-3:1993 | Glass and glasssware — Analysis of extract solutions — Part 3: Determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry |
EN 1400:2013+A1:2014 | Child use and care articles - Soothers for babies and young children - Safety requirements and test methods |
BS 2000-575(2009) : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
UNE-EN ISO 27108:2014 | Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 27108:2010) |
DIN EN ISO 15681-2:2005-05 | WATER QUALITY - DETERMINATION OF ORTHOPHOSPHATE AND TOTAL PHOSPHORUS CONTENTS BY FLOW ANALYSIS (FIA AND CFA) - PART 2: METHOD BY CONTINUOUS FLOW ANALYSIS (CFA) |
UNE-EN ISO 1135-3:2017 | Transfusion equipment for medical use - Part 3: Blood-taking sets for single use (ISO 1135-3:2016) |
UNI EN 15647 : 2009 | SURFACE ACTIVE AGENTS - DETERMINATION OF THE DISPERSING EFFECT OF SURFACTANTS ON POWDER |
17/30345786 DC : 0 | BS EN 646 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD |
NF EN ISO 17072-2 : 2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
UNE-EN ISO 5402-2:2016 | Leather - Determination of flex resistance - Part 2: Vamp flex method (ISO 5402-2:2015) |
DIN EN ISO 10704:2015-11 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD (ISO 10704:2009) |
UNE-EN ISO 17075-1:2018 | Leather - Chemical determination of chromium(VI) content in leather - Part 1: Colorimetric method (ISO 17075-1:2017) |
UNE-EN 16924:2018 | Foodstuffs - Determination of zearalenone in edible vegetable oils by LC-FLD or LC-MS/MS |
BS EN ISO 18369-4:2017 | Ophthalmic optics. Contact lenses Physicochemical properties of contact lens materials |
I.S. EN ISO 18857-2:2011 | WATER QUALITY - DETERMINATION OF SELECTED ALKYLPHENOLS - PART 2: GAS CHROMATOGRAPHIC-MASS SPECTROMETRIC DETERMINATION OF ALKYLPHENOLS, THEIR ETHOXYLATES AND BISPHENOL A IN NON-FILTERED SAMPLES FOLLOWING SOLID-PHASE EXTRACTION AND DERIVATISATION (ISO 18857-2:2009) |
UNI EN ISO 7886-4 : 2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 4: SYRINGES WITH RE-USE PREVENTION FEATURE |
CGSB 4.2-18.3 : 1997(R2010) | TEXTILE TEST METHODS - TEXTILES - TESTS FOR COLOURFASTNESS - PART B02: COLOURFASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST |
I.S. CEN TS 15411:2006 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN) |
DIN ISO 6618:2015-07 | Petroleum products and lubricants - Determination of acid or base number - Colour-indicator titration method (ISO 6618:1997) |
EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
BS 2000-388(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY OF MIDDLE-DISTILLATE FUELS |
BS EN ISO 17226-2:2008 | Leather. Chemical determination of formaldehyde content Method using colorimetric analysis |
I.S. EN 16144:2012 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD |
15/30317321 DC : 0 | BS EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
I.S. CEN TS 14997:2006 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH-CONTROL |
NF EN ISO 8130-3 : 2011 | COATING POWDERS - PART 3: DETERMINATION OF DENSITY BY LIQUID DISPLACEMENT PYKNOMETER |
UNE-EN 16694:2016 | Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS) |
BS EN ISO 18218-2:2015 | Leather. Determination of ethoxylated alkylphenols Indirect method |
ISO 13164-4:2015 | Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting |
EN 13491:2018 | Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures |
ISO 4317:2011 | Surface-active agents and detergents — Determination of water content — Karl Fischer methods |
BIS IS/ISO 105-A01 : 1994 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING |
BIS IS/ISO 6492 : 1999 | ANIMAL FEEDING STUFFS - DETERMINATION OF FAT CONTENT |
UNE-EN 60754-2:2014 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
EN ISO 2812-3:2012 | Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012) |
BS EN ISO 5398-4:2007 | Leather. Chemical determination of chromic oxide content Quantification by inductive coupled plasma-optical emission spectrometer (ICP-OES) |
UNE-EN 10351:2012 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
EN 1568-4:2018 | Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids |
BS 2000-574(2014) : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
UNE-ISO 8787:2012 | Paper and board. Determination of capillary rise. Klemm method |
BS 2000-521(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-521: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMEN EMULSIONS BY WATER IMMERSION TEST - AGGREGATE METHOD |
ADA 6 : 1985(R2005) | DENTAL MERCURY |
NF EN ISO 105 C08 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW-TEMPERATURE BLEACH ACTIVATOR |
UNI EN ISO 16187 : 2013 | FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO ASSESS ANTIBACTERIAL ACTIVITY |
NF EN ISO 17226-3 : 2011 | LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 3: DETERMINATION OF FORMALDEHYDE EMISSIONS FROM LEATHER |
I.S. EN 62321-4:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 4: MERCURY IN POLYMERS, METALS AND ELECTRONICS BY CV-AAS, CV-AFS, ICP-OES AND ICP-MS |
I.S. EN ISO 17071:2011 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FOGGING CHARACTERISTICS (ISO 17071:2006) |
BS EN ISO 9693:2000 | Metal-ceramic dental restorative systems |
ISO 8518:2001 | Workplace air — Determination of particulate lead and lead compounds — Flame or electrothermal atomic absorption spectrometric method |
ISO 6370-2:2011 | Vitreous and porcelain enamels Determination of the resistance to abrasion Part 2: Loss in mass after sub-surface abrasion |
ISO 4829-1:2018 | Steel and cast iron — Determination of total silicon contents — Reduced molybdosilicate spectrophotometric method — Part 1: Silicon contents between 0,05 % and 1,0 % |
ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
ISO 20279:2005 | Soil quality Extraction of thallium and determination by electrothermal atomic absorption spectrometry |
I.S. EN 15792:2009 | ANIMAL FEEDING STUFFS - DETERMINATION OF ZEARALENONE IN ANIMAL FEED - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH FLUORESCENCE DETECTION AND IMMUNOAFFINITY COLUMN CLEAN-UP |
ISO 19724:2016 | Gasoline engines with direct injection Cleanliness assessment of fuel injection equipment |
EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
ISO 14154:2005 | Soil quality — Determination of some selected chlorophenols — Gas-chromatographic method with electron-capture detection |
ISO 22634:2008 | Cigarettes Determination of benzo[a]pyrene in cigarette mainstream smoke Method using gas chromatography/mass spectrometry |
ISO 22241-1:2006 | Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements |
EN ISO 20701:2018 | Leather - Tests for colour fastness - Colour fastness to saliva (ISO 20701:2017) |
I.S. EN 15484:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD |
ISO/TS 16965:2013 | Soil quality Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS) |
EN ISO 13938-2:1999 | Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999) |
EN ISO 2554 : 1999 | PLASTICS - UNSATURATED POLYESTER RESINS - DETERMINATION OF HYSROXYL VALUE |
ISO 16373-2:2014 | Textiles — Dyestuffs — Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water) |
ISO 3856-3:1984 | Paints and varnishes — Determination of "soluble" metal content — Part 3: Determination of barium content — Flame atomic emission spectrometric method |
I.S. EN ISO 17700:2005 | FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING |
I.S. EN ISO 13938-2:1999 | TEXTILES - BURSTING PROPERTIES OF FABRICS - PART 2: PNEUMATIC METHOD FOR DETERMINATION OF BURSTING STRENGTH AND BURSTING DISTENSION |
EN ISO 10319:2015 | Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
I.S. EN ISO 3826-1:2013 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 1: CONVENTIONAL CONTAINERS (ISO 3826-1:2013) |
I.S. EN 12766-3:2005 | PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 3: DETERMINATION AND QUANTIFICATION OF POLYCHLORINATED TERPHENYLS (PCT) AND POLYCHLORINATED BENZYL TOLUENES (PCBT) CONTENT BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD) |
I.S. EN ISO 6246:2017 | PETROLEUM PRODUCTS - GUM CONTENT OF FUELS - JET EVAPORATION METHOD (ISO 6246:2017) |
I.S. EN ISO 3630-1:2008 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
ISO 14900:2017 | Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number |
UNI EN ISO 3630-1 : 2008 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
DIN EN ISO 20783-1:2011-04 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011) |
DIN EN 13138-1:2015-02 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
DIN EN ISO 17294-1:2007-02 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
DIN EN 12014-4:2005-08 | Foodstuffs - Determination of nitrate and/or nitrite content - Part 4: Ion-exchange chromatographic (IC) method for the determination of nitrate and nitrite content of meat products |
DIN EN 1483:2007-07 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY |
DIN EN ISO 17375:2006-09 | ANIMAL FEEDING STUFFS - DETERMINATION OF AFLATOXIN B[1] |
DIN EN 12926:2015-05 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM PEROXODISULFATE |
DIN EN 13138-3:2015-02 | Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn |
DIN EN ISO 2811-1:2016-08 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
DIN EN ISO 22478:2006-07 | Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006) |
DIN EN 1427:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
DIN EN ISO 17070:2015-05 | LEATHER - CHEMICAL TESTS - DETERMINATION OF TETRACHLOROPHENOL-, TRICHLOROPHENOL-, DICHLOROPHENOL-, MONOCHLOROPHENOL-ISOMERS AND PENTACHLOROPHENOL CONTENT (ISO 17070:2015) |
DIN EN 49-2:2015-10 | Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2: Application by impregnation (Laboratory method) |
DIN EN ISO 11143:2008-10 | DENTISTRY - AMALGAM SEPARATORS |
DIN EN ISO 11609:2016-07 (Draft) | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017) |
DIN EN ISO 10321:2008-08 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
DIN EN ISO 11507:2007-05 | PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER |
DIN EN ISO 15788-2:2005-02 | Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 2: Method using high-performance liquid chromatography (HPLC) (ISO 15788-2:2003) |
DIN EN 15863:2015-06 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED CONDITIONS |
UNE-EN ISO 17294-2:2017 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2016) |
BS EN ISO 12402-7 : 2007 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 1430:2009 | Bitumen and bituminous binders. Determination of particle polarity of bituminous emulsions |
BS EN ISO 21078-2:2007 | Determination of boron (III) oxide in refractory products Acid extraction method for the determination of boron (III) oxide in binder components |
UNE-EN ISO 105-E03:2010 | Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010) |
BS EN 14288:2003 | Leather. Physical and mechanical tests. Determination of fogging characteristics |
BS EN ISO 15141-2:1998 | Foodstuffs. Determination of ochratoxin A in cereals and cereal products High performance liquid chromatographic method with bicarbonate clean up |
BS EN ISO 17229:2016 | Leather. Physical and mechanical tests. Determination of water vapour absorption |
BS EN 1201:2005 | Chemicals used for treatment of water intended for human consumption. Potassium dihydrogen orthophosphate |
BS EN 1988-1:1998 | Foodstuffs. Determination of sulfite Optimized Monier-Williams method |
BS EN 13752:2012 | Products used for treatment of water intended for human consumption. Manganese dioxide |
BS EN ISO 11885:2009 | Water quality. Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
UNE-EN ISO 16408:2016 | Dentistry - Oral care products - Oral rinses (ISO 16408:2015) |
ISO 14565:2000 | Animal feeding stuffs Determination of vitamin A content Method using high-performance liquid chromatography |
BS EN ISO 182-2:2000 | Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures pH method |
10/30216663 DC : 0 | BS EN 16086-1 - SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PLANT RESPONSE - PART 1: POT GROWTH TEST WITH CHINESE CABBAGE |
BS EN 14371:2004 | Surface active agents. Determination of foamability and degree of foamability. Circulation test method |
BS EN 1427:2015 | Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method |
BS EN ISO 10139-2:2009 | Dentistry. Soft lining materials for removable dentures Materials for long-term use |
UNE-EN ISO 105-G01:2017 | Textiles - Tests for colour fastness - Part G01: Colour fastness to nitrogen oxides (ISO 105-G01:2016) |
UNE-EN ISO 17229:2016 | Leather - Physical and mechanical tests - Determination of water vapour absorption (ISO 17229:2016) |
BS EN 2435-002:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance |
BS EN ISO 12937:2001 | Methods of test for petroleum and its products. BS 2000-438. Petroleum products. Determination of content. Coulometric Karl Fischer titration method |
BS EN ISO 6800:1998 | Animal and vegetable fats and oils. Determination of the composition of fatty acids in the 2-position of the triglyceride molecules |
ISO 8655-3:2002 | Piston-operated volumetric apparatus Part 3: Piston burettes |
ONORM EN ISO 3630-1 : 2008 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
ONORM EN ISO 15091 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF ELECTRICAL CONDUCTIVITY AND RESISTANCE (ISO 15091:2012) |
BS EN 12857:1999 | Foodstuffs. Determination of cyclamate. High performance liquid chromatographic method |
BS EN 1200:2005 | Chemicals used for treatment of water intended for human consumption. Trisodium orthophosphate |
BS EN 867-5:2001 | Non-biological systems for use in sterilizers Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S |
BS EN ISO 5402:2002 | Leather. Physical and mechanical tests. Determination of flex resistance by flexometer method |
UNE-EN ISO 14184-1:2011 | Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) (ISO 14184-1:2011) |
UNE-EN 13138-1:2015 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
BS EN 2436-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer For exterior use with surface preparation tolerance |
BS EN 15490:2007 | Ethanol as a blending component for petrol. Determination of pHe |
BS EN 12175:2013 | Chemicals used for treatment of water intended for human consumption. He xafluorosilicic acid |
BS EN 15487:2007 | Ethanol as a blending component for petrol. Determination of phosphorus content. Ammonium molybdate spectrometric method |
ISO 9693:1999 | Metal-ceramic dental restorative systems |
BS EN ISO 17895:2005 | Paints and varnishes. Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
BS EN 14340:2004 | Leather. Physical and mechanical tests. Determination of water repellency of garment leather |
BS EN ISO 5164:2014 | Petroleum products. Determination of knock characteristics of motor fuels. Research method |
BS EN ISO 14184-2:2011 | Textiles. Determination of formaldehyde Released formaldehyde (vapour absorption method) |
BS EN ISO 2417:2016 | Leather. Physical and mechanical tests. Determination of the static absorption of water |
BS EN 14122:2014 | Foodstuffs. Determination of vitamin B1 by high performance liquid chromatography |
BS EN ISO 11498:2000 | Dental handpieces. Dental low-voltage electric motors |
BS EN ISO 20783-2:2003 | Petroleum and related products. Determination of emulsion stability of fire-resistant fluids Fluids in category HFB |
BS EN ISO 105-E02:2013 | Textiles. Tests for colour fastness Colour fastness to sea water |
BS EN ISO 17294-2:2004 | Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS) Determination of 62 elements |
UNE-EN ISO 7887:2012 | Water quality - Examination and determination of colour (ISO 7887:2011) |
BS EN 12206-1:2004 | Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder |
BS EN ISO 10304-1:2009 | Water quality. Determination of dissolved anions by liquid chromatography of ions Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
ISO 9167-1:1992 | Rapeseed Determination of glucosinolates content Part 1: Method using high-performance liquid chromatography |
BS EN ISO 10321:2008 | Geosynthetics. Tensile test for joints/seams by wide-width strip method |
BS EN ISO 10520:1998 | Native starch. Determination of starch content. Ewers polarimetric method |
BS EN 48:2005 | Wood preservatives. Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method) |
BS EN 14123:2003 | Foodstuffs. Determination of aflatoxin B<sub>1</sub> and the sum of aflatoxin B<sub>1</sub>, B<sub>2</sub>, G<sub>1</sub> and G<sub>2</sub> in peanuts, pistachios, figs, and paprika powder. High performance liquid chromatographic method with postcolumn derivatization and immunoaffinity column clean-up |
BS EN 13523-8:2017 | Coil coated metals. Test methods Resistance to salt spray (fog) |
BS EN 14035-35:2004 | Fireworks Throwdowns. Specification and test methods |
BS EN ISO 105-C10:2007 | Textiles. Tests for colour fastness Colour fastness to washing with soap or soap and soda |
BS EN ISO 15587-2:2002 | Water quality. Digestion for the determination of selected elements in water Nitric acid digestion |
UNE-EN ISO 11127-6:2012 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011) |
BS EN 12176:1998 | Characterization of sludge. Determination of pH value |
BS EN ISO 14896:2009 | Plastics. Polyurethane raw materials. Determination of isocyanate content |
ISO 105-E01:2013 | Textiles — Tests for colour fastness — Part E01: Colour fastness to water |
BS EN 49-1:2005 | Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival Application by surface treatment (laboratory method) |
BS EN 49-2:2015 | Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival Application by impregnation (Laboratory method) |
UNE-EN 14526:2017 | Foodstuffs - Determination of saxitoxin-group toxins in shellfish - HPLC method using pre-column derivatization with peroxide or periodate oxidation |
BS EN 14362-2:2003 | Textiles. Methods for the determination of certain aromatic amines deriv ed from azo colorants Detection of the use of certain azo colorants accessible by extracting t he fibres |
BS EN 2436-001:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer Basic requirements |
ISO 3262-2:1998 | Extenders for paints — Specifications and methods of test — Part 2: Barytes (natural barium sulfate) |
ISO 21627-1:2009 | Plastics Epoxy resins Determination of chlorine content Part 1: Inorganic chlorine |
BS EN 12821:2009 | Foodstuffs. Determination of vitamin D by high performance liquid chromatography. Measurement of cholecalciferol (D3) or ergocalciferol (D2) |
BS EN 14350-1:2004 | Child use and care articles. Drinking equipment General and mechanical requirements and tests |
BS EN ISO 3262-14:2000 | Extenders for paints. Specifications and methods of test Cristobalite |
BS EN 1278:2010 | Chemicals used for treatment of water intended for human consumption. Ozone |
BS EN ISO 105-C06:2010 | Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering |
BS EN 14131:2003 | Foodstuffs. Determination of folate by microbiological assay |
UNE-EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
ISO 11245:1999 | Dental restorations Phosphate-bonded refractory die materials |
UNE-EN ISO 16373-2:2015 | Textiles - Dyestuffs - Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water) (ISO 16373-2:2014) |
ISO 12402-7:2006 | Personal flotation devices Part 7: Materials and components Safety requirements and test methods |
BS EN 15491:2007 | Ethanol as a blending component for petrol. Determination of total acidity. Colour indicator titration method |
BS EN ISO 4263-4:2006 | Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test Procedure for industrial gear oils |
BS EN ISO 3262-8:2000 | Extenders for paints. Specifications and methods of test Natural clay |
BS EN ISO 10271:2011 | Dentistry. Corrosion test methods for metallic materials |
ISO 4829-2:2016 | Steels Determination of total silicon contents Reduced molybdosilicate spectrophotometric method Part 2: Silicon contents between 0,01 % and 0,05 % |
BS EN 938:2009 | Chemicals used for treatment of water intended for human consumption. Sodium chlorite |
BS EN ISO 17075:2007 | Leather. Chemical tests. Determination of chromium(VI) content |
BS EN ISO 3262-2:1998 | Extenders for paints. Specifications and methods of test Barytes (natural barium sulfate) |
BS EN 12133:1998 | Fruit and vegetable juices. Determination of chloride content. Potentiometric titration method |
BS EN ISO 591-1:2000 | Titanium dioxide pigments for paints Specifications and methods of test |
BS EN ISO 11909:2007 | Binders for paints and varnishes. Polyisocyanate resins. General methods of test |
ISO 11214:1996 | Modified starch — Determination of carboxyl group content of oxidized starch |
BS EN 14663:2005 | Foodstuffs. Determination of vitamin B6 (including its glycosylated forms) by HPLC |
BS EN ISO 17353:2005 | Water quality. Determination of selected organotin compounds. Gas chromatographic method |
BS EN ISO 15141-1:1998 | Foodstuffs. Determination of ochratoxin A in cereals and cereal products High performance liquid chromatographic method with silica gel clean up |
BS EN 1911-3:1998 | Stationary source emissions. Manual method of determination of HCI Absorption solutions analysis and calculation |
BS EN ISO 22478:2006 | Water quality. Determination of certain explosives and related compounds. Method using high-performance liquid chromatography (HPLC) with UV detection |
UNE-EN ISO 105-E04:2013 | Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013) |
BS EN 14077:2003 | Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method |
BS EN ISO 9831:2003 | Animal feeding stuffs, animal products, and faeces or urine. Determination of gross calorific value. Bomb calorimeter method |
UNE-EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
BS EN 1203:2005 | Chemicals used for treatment of water intended for human consumption. Tripotassium orthophosphate |
BS EN ISO 11215:1998 | Modified starch. Determination of adipic acid content of acetylated di-starch adipates. Gas-chromatographic method |
BS EN 14176:2017 | Foodstuffs. Determination of domoic acid in raw shellfish, raw finfish and cooked mussels by RP-HPLC using UV detection |
BS EN 14039:2004 | Characterization of waste. Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography. |
BS EN ISO 9308-1 : 2014 | WATER QUALITY - ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL BACKGROUND FLORA (ISO 9308-1:2014) |
UNE-EN 900:2015 | Chemicals used for treatment of water intended for human consumption - Calcium hypochlorite |
ISO 5164:2014 | Petroleum products — Determination of knock characteristics of motor fuels — Research method |
BS EN ISO 3549:2002 | Zinc dust pigments for paints. Specifications and test methods |
UNE-EN 898:2013 | Chemicals used for treatment of water intended for human consumption - Sodium hydrogen carbonate |
BS EN 1164:1999 | Feather and down. Test methods. Determination of the turbidity of an aqueous extract |
BS EN ISO 105-E04:2013 | Textiles. Tests for colour fastness Colour fastness to perspiration |
BS EN 1210:2005 | Chemicals used for treatment of water intended for human consumption. Sodium tripolyphosphate |
BS EN 14888:2005 | Fertilizers and liming materials. Determination of cadmium content |
BS EN ISO 105-Z04:1998 | Textiles. Tests for colour fastness Dispersibility of disperse dyes |
BS EN 14177:2003 | Foodstuffs. Determination of patulin in clear and cloudy apple juice and puree. HPLC method with liquid/liquid partition clean-up |
DIN EN ISO 9562:2005-02 | WATER QUALITY - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
UNE-EN ISO 10504:2015 | Starch derivatives - Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups - Method using high-performance liquid chromatography (ISO 10504:2013) |
BS EN ISO 8655-7:2005 | Piston-operated volumetric apparatus Non-gravimetric methods for the assessment of equipment performance |
BS EN 14526:2017 | Foodstuffs. Determination of saxitoxin-group toxins in shellfish. HPLC method using pre-column derivatization with peroxide or periodate oxidation |
BS EN ISO 2811-4:2011 | Paints and varnishes. Determination of density Pressure cup method |
BS EN 2436-003:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer High corrosion and fluid resistance |
BS EN ISO 3262-19:2000 | Extenders for paints. Specifications and methods of test Precipitated silica |
UNE-EN 12933:2015 | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acid |
ISO 15587-2:2002 | Water quality — Digestion for the determination of selected elements in water — Part 2: Nitric acid digestion |
BS EN 13270:2001 | Surface active agents. Determination of the active matter content in alkyldimethylbetaines |
BS EN ISO 15788-2:2004 | Animal and vegetable fats and oils. Determination of stigmastadienes in vegetable oils Method using high-performance liquid chromatography (HPLC) |
ISO 14362-3:2017 | Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene |
BS EN ISO 6876:2012 | Dentistry. Root canal sealing materials |
BS EN ISO 6885:2016 | Animal and vegetable fats and oils. Determination of anisidine value |
BS EN ISO 9936:2016 | Animal and vegetable fats and oils. Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography |
BS EN 14664:2004 | Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate, solid |
BS EN 12014-3:2005 | Foodstuffs. Determination of nitrate and/or nitrite content Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reduction of nitrate to nitrite |
BS EN ISO 10705-1:2001 | Water quality. Detection and enumeration of bacteriophages Detection and enumeration of bacteriophages. Enumeration of F-specific RNA bacteriophages |
BS EN 13253:2016 | Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments) |
BS EN ISO 6246:1998 | Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method |
BS EN 15510:2017 | Animal feeding stuffs. Methods of sampling and analysis. Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum and lead by ICP-AES |
UNE-EN 13257:2017 | Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals |
UNE-EN 13752:2013 | Products used for treatment of water intended for human consumption - Manganese dioxide |
BS EN ISO 20783-1:2011 | Petroleum and related products. Determination of emulsion stability of fire-resistant fluids Fluids in category HFAE |
BS EN 13191-1:2000 | Non-fatty food. Determination of bromide residues Determination of total bromide as inorganic bromide |
I.S. EN 1243:2011 | ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
UNI EN ISO 8871-2 : 2014 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION |
DIN EN 14035-35:2005-02 | FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
I.S. EN 15510:2017 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
DIN EN ISO 8655-2:2002-12 | Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002) |
I.S. EN 12606-2:2000 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 2: METHOD BY EXTRACTION |
I.S. EN 46-1:2016 | WOOD PRESERVATIVES - DETERMINATION OF THE PREVENTIVE ACTION AGAINST RECENTLY HATCHED LARVAE OF HYLOTRUPES BAJULUS (LINNAEUS) - PART 1: APPLICATION BY SURFACE TREATMENT (LABORATORY METHOD) |
I.S. EN 1202:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - DIPOTASSIUM HYDROGEN ORTHOPHOSPHATE |
I.S. EN 71-5:2015 | SAFETY OF TOYS - PART 5: CHEMICAL TOYS (SETS) OTHER THAN EXPERIMENTAL SETS |
I.S. EN 14130:2003 | FOODSTUFFS - DETERMINATION OF VITAMIN C BY HPLC |
I.S. EN 891:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) CHLORIDE SULFATE |
I.S. EN ISO 10321:2008 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
I.S. EN 900:2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM HYPOCHLORITE |
DIN EN 1911-3:1998-07 | STATIONARY SOURCE EMISSIONS - MANUAL METHOD OF DETERMINATION OF HCL - PART 3: ABSORPTION SOLUTIONS ANALYSIS AND CALCULATION |
DIN EN 1245:2011-07 | Adhesives - Determination of pH |
EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
EN 16317:2013+A1:2017 | Fertilizers and liming materials - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
DIN EN ISO 3071:2006-05 | TEXTILES - DETERMINATION OF PH OF AQUEOUS EXTRACT |
DIN EN 15950:2010-12 | Fertilizers - Determination of N-(1,2-dicarboxyethyl)-D,L-aspartic acid (Iminodisuccinic acid, IDHA) using high-performance liquid chromatography (HPLC) |
CEN/TS 16171:2012 | Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) |
EN 15562:2009 | Fertilizers - Determination of cyanamide nitrogen |
DIN ISO 11263:1996-12 | SOIL QUALITY - DETERMINATION OF PHOSPHORUS - SPECTROMETRIC DETERMINATION OF PHOSPHORUS SOLUBLE IN SODIUM HYDROGEN CARBONATE SOLUTION |
DIN EN 15490:2007-11 | Ethanol as a blending component for petrol - Determination of pHe |
CEN/TS 16172:2013 | Sludge, treated biowaste and soil - Determination of elements using graphite furnace atomic absorption spectrometry (GF-AAS) |
DIN EN ISO 648:2009-01 | LABORATORY GLASSWARE - SINGLE-VOLUME PIPETTES |
EN 13037:2011 | Soil improvers and growing media - Determination of pH |
EN 13255:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals |
CEN/TS 16317:2012 | Fertilizers - Determination of trace elements - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
CEN/TS 15451:2006 | Fertilizers - Determination of chelating agents - Determination of iron chelated by EDDHSA by ion pair chromatography |
DIN EN ISO 105-C08:2010-08 | Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator (ISO 105-C08:2010) |
EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
EN ISO 12846:2012 | Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012) |
EN 15559:2009 | Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd |
DIN EN 14152:2003-10 | FOODSTUFFS - DETERMINATION OF VITAMIN B2 BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
DIN EN 14888:2005-10 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM CONTENT |
DIN EN ISO 2871-2:2010-06 | Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010) |
DIN EN 14863:2006-03 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF THE EDGE COVERING OF ENAMELLED STEEL PLATE TO BE USED IN HEAT EXCHANGERS |
CEN/TS 16233-2:2011 | Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh - Part 2: Identification of the enantiomer ratio of astaxanthin |
EN 12595:2014 | Bitumen and bituminous binders - Determination of kinematic viscosity |
EN 12678:2016 | Chemical used for treatment of water intended for human consumption - Potassium peroxomonosulfate |
EN 12932:2015 | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate |
DIN EN 14881:2005-11 | SURFACE ACTIVE AGENTS - DETERMINATION OF N-(3-DIMETHYLAMINOPROPYL)-ALKYLAMIDE CONTENT IN ALKYLAMIDOPROPYLBETAINES - GAS CHROMATOGRAPHIC METHOD |
EN 1201:2005 | Chemicals used for treatment of water intended for human consumption - Potassium dihydrogen orthophosphate |
EN 15479:2009 | Fertilizers - Spectrophotometric determination of biuret in urea |
EN 1208:2005 | Chemicals used for treatment of water intended for human consumption - Sodium calcium polyphosphate |
EN 12780 : 2002 | WATER QUALITY - DETECTION AND ENUMERATION OF PSEUDOMONAS AERUGINOSA BY MEMBRANE FILTRATION |
EN 16175-2:2016 | Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS) |
EN 12933:2015 | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acid |
EN 12121:2012 | Chemicals used for treatment of water intended for human consumption - Sodium disulfite |
EN 1132:1994 | Fruit and vegetable juices - Determination of the pH-value |
DIN EN ISO 7886-4:2010-01 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 4: SYRINGES WITH RE-USE PREVENTION FEATURE |
CEN/TS 15360:2006 | Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC) |
EN 1207:2005 | Chemicals used for treatment of water intended for human consumption - Tetrapotassium pyrophosphate |
EN 1212:2005 | Chemicals used for treatment of water intended for human consumption - Sodium polyphosphate |
EN 12766-1:2000 | Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
CEN/TS 15412:2010 | Solid recovered fuels - Methods for the determination of metallic aluminium |
CEN/TS 15558:2007 | Fertilizers - Determination of nitric and ammoniacal nitrogen according to Ulsch |
EN 1278:2010 | Chemicals used for treatment of water intended for human consumption - Ozone |
EN 13191-1:2000 | Non-fatty food - Determination of bromide residues - Part 1: Determination of total bromide as inorganic bromide |
EN 13265:2016 | Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects |
CEN/TS 15862:2012 | Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions |
CEN/TS 15749:2008 | Fertilizers - Determination of sulfates content using three different methods |
DIN EN ISO 9073-12:2005-03 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 12: DEMAND ABSORBENCY |
EN 12912:2012 | Products used for treatment of water intended for human consumption - Barite |
DIN EN 15891:2010-12 | Foodstuffs - Determination of deoxynivalenol in cereals, cereal products and cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and UV detection |
EN ISO 21627-2:2009 | Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009) |
CEN/TS 15559:2007 | Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd |
DIN EN ISO 105-C06:2010-08 | Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010) |
EN 12173:2012 | Chemicals used for treatment of water intended for human consumption - Sodium fluoride |
DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
EN 1137:1994 | Fruit and vegetable juices - Enzymatic determination of citric acid (citrate) content - NADH spectrometric method |
EN 12120:2012 | Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite |
CEN/TS 16384:2012 | Synthetic sport systems - Leaching test |
DIN ISO 11009:2007-07 | PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF WATER WASHOUT CHARACTERISTICS OF LUBRICATING GREASES |
DIN EN 16877:2017-03 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF T-2 AND HT-2 TOXINS, DEOXYNIVALENOL AND ZEARALENONE, IN FEED MATERIALS AND COMPOUND FEED BY LC-MS |
EN 15749:2009 | Fertilizers - Determination of sulfates content using three different methods |
DIN EN ISO 5667-15:2010-01 | Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009) |
DIN EN 15168:2007-02 | Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide |
EN 12926:2015 | Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfate |
EN 13250:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways |
DIN EN 14526:2004-11 | FOODSTUFFS - DETERMINATION OF SAXITOXIN-GROUP TOXINS IN SHELLFISH - HPLC METHOD USING PRE-COLUMN DERIVATIZATION WITH PEROXIDE OR PERIODATE OXIDATION |
EN 1198:2005 | Chemicals used for treatment of water intended for human consumption - Sodium dihydrogen orthophosphate |
DIN EN ISO 13900:2002-10 | STEEL - DETERMINATION OF HIGH BORON CONTENT - CURCUMIN SPECTROPHOTOMETRIC METHOD AFTER DISTILLATION |
EN 13273:2001 | Surface active agents - Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC) |
EN 15750:2009 | Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
CEN/TS 16320:2012 | Fertilizers - Determination of trace elements - Determination of mercury by vapour generation (VG) after aqua regia dissolution |
CEN/TS 15119-2:2012 | Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method |
EN 1199:2005 | Chemicals used for treatment of water intended for human consumption - Disodium hydrogen orthophosphate |
EN 1019:2005 | Chemicals used for treatment of water intended for human consumption - Sulfur dioxide |
EN 1204:2005 | Chemicals used for treatment of water intended for human consumption - Calcium tetrahydrogen bis(orthophosphate) |
DIN EN 15909:2010-11 | Fertilizers - Determination of calcium and formate in calcium foliar fertilizers |
DIN EN 15905:2010-11 | Fertilizers - Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC) |
DIN ISO 4619:2002-04 | DRIERS FOR PAINTS AND VARNISHES |
EN 13191-2:2000 | Non-fatty food - Determination of bromide residues - Part 2: Determination of inorganic bromide |
EN 12823-1:2014 | Foodstuffs - Determination of vitamin A by high performance liquid chromatography - Part 1: Measurement of all-E-retinol and 13-Z-retinol |
EN 15410:2011 | Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
EN 1202:2005 | Chemicals used for treatment of water intended for human consumption - Dipotassium hydrogen orthophosphate |
DIN EN ISO 105-E16:2007-09 | Textiles - Tests for colour fastness - Part E16: Colour fastness to water spotting on upholstery fabrics (ISO 105-E16:2006) |
EN 16187:2015 | Foodstuffs - Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection after pre-column derivatisation |
EN 14397-1:2010 | Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers |
EN ISO 17694:2016 | Footwear - Test methods for uppers and lining - Flex resistance (ISO 17694:2016) |
BS 4227:1986 | Specification for dental mercury |
DIN EN 15488:2007-11 | Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method |
CEN/TS 16177:2012 | Sludge, treated biowaste and soil - Extraction for the determination of extractable ammonia, nitrate and nitrite |
EN 12631:1999 | Fruit and vegetable juices - Enzymatic determination of D- and L-lactic acid (lactate) content - NAD spectrometric method |
CEN/TS 16233-1:2011 | Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh - Part 1: Determination of astaxanthin and canthaxanthin |
EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
EN 10361:2015 | Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method |
DIN EN 15489:2007-11 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method |
EN 1140:1994 | Fruit and vegetable juices - Enzymatic determination of D-glucose and D-fructose content - NADPH spectrometric method |
CEN/TS 16188:2012 | Sludge, treated biowaste and soil - Determination of elements in aqua regia and nitric acid digests - Flame atomic absorption spectrometry method (FAAS) |
EN ISO 17852:2008 | Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006) |
EN 12915-1:2009 | Products used for the treatment of water intended for human consumption - Granular activated carbon - Part 1: Virgin granular activated carbon |
EN 13543:2001 | Manufactured articles filled with feather and down - Measurement of water absorption of filling material |
CEN/TS 15621:2007 | Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES |
EN 13366:2001 | Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients |
EN 12136:1997 | Fruit and vegetable juices - Determination of total carotenoid content and individual carotenoid fractions |
CEN/TS 16318:2012 | Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) |
DIN EN ISO 5164:2014-10 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
DIN EN 16317:2017-05 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
EN 13177:2010 | Chemicals used for treatment of water intended for human consumption - Methanol |
EN 12490:2010 | Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood |
EN 1205:2005 | Chemicals used for treatment of water intended for human consumption - Disodium dihydrogen pyrophosphate |
CEN/TS 15705:2009 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
DIN EN ISO 13438:2005-02 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO OXIDATION |
EN 13075-2:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
UNI EN 13138-3 : 2015 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
DIN ISO 10390:1997-05 | SOIL QUALITY - DETERMINATION OF PH |
EN ISO 22288:2009 | Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006) |
CEN ISO/TS 21268-2:2009 | Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter (ISO/TS 21268-2:2007) |
EN 1122:2001 | Plastics - Determination of cadmium - Wet decomposition method |
CEN/TS 16637-3:2016 | Construction products - Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test |
EN 1243:2011 | Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
EN 12857:1999 | Foodstuffs - Determination of cyclamate - High performance liquid chromatographic method |
DIN EN ISO 14896:2009-07 | PLASTICS - POLYURETHANE RAW MATERIALS - DETERMINATION OF ISOCYANATE CONTENT |
EN 12836:2002 | Surface active agents - Determination of the water number of alkoxylated products |
EN 10351:2011 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
EN 12176:1998 | Characterization of sludge - Determination of pH-value |
CEN/TS 16621:2014 | Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by high performance liquid chromatography with fluorescence detection (HPLC-FD) |
DIN ISO 13741-2:2003-04 | PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DETERMINATION OF RESIDUAL MONOMERS AND OTHER ORGANIC COMPONENTS BY CAPILLARY-COLUMN GAS CHROMATOGRAPHY - PART 2: HEADSPACE METHOD |
EN 117:2012 | Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
EN 12632:1999 | Fruit and vegetable juices - Enzymatic determination of acetic acid (acetate) content - NAD Spectrometric method |
CEN ISO/TS 21268-1:2009 | Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter (ISO/TS 21268-1:2007) |
EN 12458:1999 | Surface active agents - Determination of stability in hard water |
EN 12931:2015 | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous |
EN 13335 : 2002 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF THE FLEX RESISTANCE BY THE VAMP FLEX METHOD |
EN 12875-5:2006 | Mechanical dishwashing resistance of utensils - Part 5: Rapid test for ceramic catering articles |
DIN EN 13075-2:2017-02 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
ONORM EN 13138-2 : 2015 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
EN 12848:2009 | Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions |
EN 15411:2011 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
DIN EN 15115:2007-03 | Textile floor coverings - Determination of sensitivity to spilled water |
EN 12582:1999 | Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD |
EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
EN ISO 4583 : 1998 | PLASTICS - EPOXY RESINS AND RELATED MATERIALS - DETERMINATION OF EASILY SAPONIFIABLE CHLORINE |
EN 15705:2010 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
EN 12911:2013 | Products used for treatment of water intended for human consumption - Manganese greensand |
DIN EN ISO 105-E09:2010-08 | Textiles - Tests for colour fastness - Part E09: Colour fastness to potting (ISO 105-E09:2010) |
EN 12123:2012 | Chemicals used for treatment of water intended for human consumption - Ammonium sulfate |
DIN ISO 6614:2002-04 | PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS |
EN ISO 17700:2005 | Footwear - Test methods for uppers, linings and insocks - Colour fastness to rubbing (ISO 17700:2004) |
EN 15561:2009 | Fertilizers - Determination of total nitrogen in calcium cyanamide containing nitrates |
EN 15621:2017 | Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES |
EN 12634:1998 | Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method |
EN 10355:2013 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
CEN/TR 15314:2006 | Durability of wood and wood-based products - Quantitative determination of quaternary ammonium compounds in wood |
EN 15558:2009 | Fertilizers - Determination of nitric and ammoniacal nitrogen according to Ulsch |
EN 1210:2005 | Chemicals used for treatment of water intended for human consumption - Sodium tripolyphosphate |
EN 1014-3:2010 | Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo(a)pyrene content of creosote |
DIN EN ISO 15914:2005-06 | Animal feeding stuffs - Enzymatic determination of total starch content (ISO 15914:2004); German version EN 15914:2005 |
DIN ISO 8130-3:2005-04 | COATING POWDERS - PART 3: DETERMINATION OF DENSITY BY LIQUID DISPLACEMENT PYKNOMETER |
DIN EN 14242:2004-12 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
CEN/TS 15452:2006 | Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p-EDDHA by reversed phase HPLC |
EN 15451:2008 | Fertilizers - Determination of chelating agents - Determination of iron chelated by EDDHSA by ion pair chromatography |
DIN EN 71-11:2006-01 | Safety of toys - Part 11: Organic chemical compounds - Methods of analysis |
DIN EN 14663:2006-03 | Foodstuffs - Determination of vitamin B6 (including its glycosylated forms) by HPLC |
ONORM EN ISO 10703 : 2015 | WATER QUALITY - DETERMINATION OF THE ACTIVITY CONCENTRATION OF RADIONUCLIDES - METHOD BY HIGH RESOLUTION GAMMA-RAY SPECTROMETRY (ISO 10703:2007) |
CEN/TS 16187:2011 | Foodstuffs - Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection after precolumn derivatization |
DIN EN 1568-4:2008-06 | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 4: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-MISCIBLE LIQUIDS |
CEN/TS 16175-1:2013 | Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS) |
CEN/TS 15410:2006 | Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
CEN/TS 12404:2015 | Durability of wood and wood-based products - Assessment of the effectiveness of a masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray - Laboratory method |
DIN EN 15484:2007-11 | Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method |
EN 15452:2008 | Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p-EDDHA by reversed phase HPLC |
DIN EN 12875-4:2006-06 | Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles |
DIN EN 14672:2005-10 | Characterization of sludges - Determination of total phosphorus; German version EN 14672:2005 |
CEN/TS 15479:2006 | Fertilizers - Spectrophotometric determination of biuret in urea |
EN 12821:2009 | Foodstuffs - Determination of vitamin D by high performance liquid chromatography - Measurement of cholecalciferol (D3) or ergocalciferol (D2) |
EN 12138:1997 | Fruit and vegetable juices - Enzymatic determination of D-malic acid content - NAD spectrometric method |
EN 13257:2016 | Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals |
EN ISO 9693 : 2000 | METAL-CERAMIC DENTAL RESTORATIVE SYSTEMS |
EN 13320:2002 | Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates |
CEN/TS 839:2008 | Wood preservatives - Determination of the protective effectiveness against wood destroying basidiomycetes - Application by surface treatment |
CEN/TS 16677:2014 | Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release |
EN ISO 16050:2011 | Foodstuffs - Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products - High-performance liquid chromatographic method (ISO 16050:2003) |
EN 13249:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
EN 15863:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
EN 12174:2013 | Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate |
EN 12386:2012 | Chemicals used for treatment of water intended for human consumption - Copper sulfate |
EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
EN 12850:2009 | Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions |
EN ISO 9073-12:2004 | Textiles - Test methods for nonwovens - Part 12: Demand absorbency (ISO 9073-12:2002) |
CEN/TS 15411:2006 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
EN 13515:2001 | Footwear - Test methods for uppers and lining - Water vapour permeability and absorption |
EN 13038:2011 | Soil improvers and growing media - Determination of electrical conductivity |
EN 1245:2011 | Adhesives - Determination of pH |
EN 12606-1:2015 | Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation |
EN 1206:2005 | Chemicals used for treatment of water intended for human consumption - Tetrasodium pyrophosphate |
CEN/TS 16637-2:2014 | Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test |
EN 12485:2017 | Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime - Test methods |
EN 13890:2009 | Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods |
CEN/TS 16692:2015 | Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry |
DIN EN 15086:2006-06 | Foodstuffs - Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs |
EN 12596:2014 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
EN 62321-7-1:2015 | Determination of certain substances in electrotechnical products - Part 7-1: Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method |
DIN EN ISO 15587-2:2002-07 | WATER QUALITY - DIGESTION FOR THE DETERMINATION OF ELEMENTS IN WATER - PART 2: NITRIC ACID DIGESTION |
DIN EN 15510:2017-10 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
EN 13254:2016 | Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams |
EN ISO 17075:2007 | Leather - Chemical tests - Determination of chromium(VI) content (ISO 17075:2007) |
EN 13256:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures |
DIN EN ISO 21078-2:2007-12 | DETERMINATION OF BORON(3) OXIDE IN REFRACTORY PRODUCTS - PART 2: ACID EXTRACTION METHOD FOR THE DETERMINATION OF BORON(3) OXIDE IN BINDER COMPONENTS |
CEN/TS 14495 : 2003 | LEATHER - CHEMICAL TESTS - DETERMINATION OF CHROMIUM 6 CONTENT |
EN 1165:1996 | Feather and down - Test methods - Determination of water-soluble chlorides |
CEN/TS 15937:2013 | Sludge, treated biowaste and soil - Determination of specific electrical conductivity |
EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
DIN EN 14832:2005-09 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS |
EN 13266:2001 | Slow-release fertilizers - Determination of the release of the nutrients - Method for coated fertilizers |
EN 13503-6 : 2002 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 6: SHELF-LIFE AND TRANSPORT STABILITY |
EN 12135:1997 | Fruit and vegetable juices - Determination of nitrogen content - Kjeldahl method |
I.S. EN ISO 3231:1998 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
ONORM EN 890 : 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) SULFATE LIQUID |
I.S. EN ISO 3262-3:1999 | EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - BLANC FIXE |
ONORM EN 1811 : SEP 2015 | REFERENCE TEST METHOD FOR RELEASE OF NICKEL FROM ALL POST ASSEMBLIES WHICH ARE INSERTED INTO PIERCED PARTS OF THE HUMAN BODY AND ARTICLES INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN |
I.S. EN ISO 3262-22:2002 | EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - PART 22: FLUX-CALCINED KIESELGUHR |
ONORM EN ISO 11127-7 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 7: DETERMINATION OF WATER-SOLUBLE CHLORIDES (ISO 11127-7:2011) |
EN ISO 11731-2:2008 | Water quality - Detection and enumeration of Legionella - Part 2: Direct membrane filtration method for waters with low bacterial counts (ISO 11731-2:2004) |
ONORM EN 12596 : 2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY BY VACUUM CAPILLARY |
ONORM EN 15560 : 2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN CALCIUM CYANAMIDE NITRATE FREE |
ONORM EN ISO 21606 : 2007 | DENTISTRY - ELASTOMERIC AUXILIARIES FOR USE IN ORTHODONTICS |
I.S. EN ISO 3262-9:1999 | EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - CALCINED CLAY |
SAE ARP7120:2023 | Compatibility of Turbine Lubricating Oils |
I.S. EN 14664:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON(3) SULFATE, SOLID |
I.S. EN 14944-1:2006 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
DEFSTAN 91-89/2(2002) : 2002 AMD 3 2004 | ISO-PROPYL NITRATE, MONOFUEL - NATO CODE: S-746 JOINT SERVICE DESIGNATION: AVPIN |
I.S. EN ISO 3262-2:1999 | EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - BARYTE (NATURAL BARIUM SULFATE) |
I.S. EN ISO 3262-15:2000 | EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - PART 15: VITREOUS SILICA |
ONORM EN ISO 3107 : 2011 | DENTISTRY - ZINC OXIDE/EUGENOL CEMENTS AND ZINC OXIDE/NON-EUGENOL CEMENTS |
ONORM EN ISO 18218-1 : 2015 | LEATHER - DETERMINATION OF ETHOXYLATED ALKYLPHENOLS - PART 1: DIRECT METHOD (ISO 18218-1:2015) |
ONORM EN ISO 11127-6 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 6: DETERMINATION OF WATER-SOLUBLE CONTAMINANTS BY CONDUCTIVITY MEASUREMENT (ISO 11127-6:2011) |
ONORM EN 12595 : 2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
I.S. EN ISO 3262-4:1999 | EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - WHITING |
NBR ISO 105-B02 : 2007 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST |
I.S. EN ISO 3262-14:2000 | EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS FOR TEST - PART 14: CRISTOBALITE |
NBR ISO 18369-4 : 2013 | OPHTHALMIC OPTICS - CONTACT LENSES - PART 4: PHYSICOCHEMICAL PROPERTIES OF CONTACT LENS MATERIALS |
BS 2000-485(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMEN EMULSIONS |
DEFSTAN 05-50(PT61)/2(2003) : 2003 AMD 1 2003 | METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 61: METHODS FOR TESTING GAS TURBINE ENGINE SYNTHETIC LUBRICANTS |
ENV 807:2001 | Wood preservatives - Determination of the effectiveness against soft rotting micro-fungi and other soil inhabiting micro-organisms |
BS 3900-F18(2005) : 2005 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
ONORM EN 15195 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
I.S. EN ISO 3262-5:1999 | EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - NATURAL CRYSTALLINE CALCIUM CARBONATE |
I.S. EN ISO 3262-8:1999 | EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - PART 8: NATURAL CLAY |
BS EN 16174:2012 | Sludge, treated biowaste and soil. Digestion of aqua regia soluble fractions of elements |
BS 2000-220(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF RUST-PREVENTION CHARACTERISTICS OF LUBRICATING GREASES |
BS EN 15705:2010 | Fertilizers. Determination of urea condensates using high-performance liquid chromatography (HPLC). Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
BS 2000-182(2006) : 2006 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 182: DETERMINATION OF INORGANIC ACIDITY OF PETROLEUM PRODUCTS - COLOUR INDICATOR TITRATION METHOD |
DIN EN ISO 15234:2011-02 | Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999) |
DIN EN ISO 16373-2:2014-10 | Textiles - Dyestuffs - Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water) (ISO 16373-2:2014) |
I.S. EN 15608:2008 | SURFACE ACTIVE AGENTS - QUANTITATIVE DETERMINATION OF FREE FATTY ACID IN ALKYLAMIDOPROPYLBETAINES - GAS-CHROMATOGRAPHIC METHOD |
S.R. CEN/TS 16375:2013 | LIMING MATERIALS - DETERMINATION OF THE AMOUNT OF RESIDUAL FINELY GROUND CARBONATE IN SOILS - VOLUMETRIC METHOD |
I.S. EN ISO 14088:2012 | LEATHER - CHEMICAL TESTS - QUANTITATIVE ANALYSIS OF TANNING AGENTS BY FILTER METHOD (ISO 14088:2012) |
I.S. EN ISO 8623:2015 | TALL-OIL FATTY ACIDS FOR PAINTS AND VARNISHES - TEST METHODS AND CHARACTERISTIC VALUES (ISO 8623:2015) |
I.S. EN ISO 18369-4:2017&LC:2018 | OPHTHALMIC OPTICS - CONTACT LENSES - PART 4: PHYSICOCHEMICAL PROPERTIES OF CONTACT LENS MATERIALS (ISO 18369-4:2017, CORRECTED VERSION 2017-10-01) |
EN ISO 3262-20:2000 | Extenders for paints - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2000) |
03/305257 DC : DRAFT MAR 2003 | BS EN ISO 9562 - WATER QUALITY - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
05/30135475 DC : DRAFT JUNE 2005 | |
BS EN 15621:2017 | Animal feeding stuffs: Methods of sampling and analysis. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES |
DIN EN ISO 16198:2015-04 | SOIL QUALITY - PLANT-BASED TEST TO ASSESS THE ENVIRONMENTAL BIOAVAILABILITY OF TRACE ELEMENTS TO PLANTS (ISO 16198:2015) |
BS ISO 22634:2008 | Cigarettes. Determination of benzo[a]pyrene in cigarette mainstream smoke. Method using gas chromatography/mass spectrometry |
DIN ISO 11349:2015-12 | WATER QUALITY - DETERMINATION OF LOW-VOLATILITY LIPOPHILIC SUBSTANCES - GRAVIMETRIC METHOD (ISO 11349:2010) |
DIN EN ISO 17226-3:2011-09 | Leather - Chemical determination of formaldehyde content - Part 3: Determination of formaldehyde emissions from leather (ISO 17226-3:2011) |
ISO 11048:1995 | Soil quality Determination of water-soluble and acid-soluble sulfate |
ISO 13965:1998 | Meat and meat products Determination of starch and glucose contents Enzymatic method |
DIN EN ISO 27587:2010-02 | Leather - Chemical tests - Determination of the free formaldehyde in process auxiliaries (ISO 27587:2009) |
00/560948 DC : DRAFT MAR 2000 | BS ISO 8871-3 - ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 3: COUNTING OF RELEASED PARTICLES |
03/314898 DC : DRAFT SEP 2003 | ISO 8655-7 - PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERRORS |
PD CEN/TS 15864:2012 | Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
BS 6069-4.1:1990 | Characterization of air quality. Stationary source emissions Method for the determination of the mass concentration of sulphur dioxide: hydrogen peroxide/barium perchlorate/Thorin method |
I.S. EN ISO 9697:2017 | WATER QUALITY - GROSS BETA ACTIVITY IN NON-SALINE WATER - TEST METHOD USING THICK SOURCE (ISO 9697:2015) |
PD CEN/TS 16317:2012 | Fertilizers. Determination of trace elements. Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
DIN EN ISO 11085:2016-02 | CEREALS, CEREALS-BASED PRODUCTS AND ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT AND TOTAL FAT CONTENT BY THE RANDALL EXTRACTION METHOD (ISO 11085:2015) |
BS 6068-2.71(2000) : 2000 | WATER QUALITY - DETERMINATION OF CHLORIDE BY FLOW ANALYSIS (CFA AND FIA) AND PHOTOMETRIC OR POTENTIOMETRIC DETECTION |
BS ISO 3987:2010 | Petroleum products. Determination of sulfated ash in lubricating oils and additives |
BS EN 14397-1:2010 | Fertilizers and liming materials. Determination of carbon dioxide Method for solid fertilizers |
ISO 17318:2015 | Fertilizers and soil conditioners Determination of arsenic, cadmium, chromium, lead and mercury contents |
ISO 11731:2017 | Water quality — Enumeration of Legionella |
10/30227632 DC : 0 | BS ISO 4317 - SURFACE-ACTIVE AGENTS AND DETERGENTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD |
PD ISO/TS 17073:2013 | Soil quality. Determination of trace elements in aqua regia and nitric acid digests. Graphite furnace atomic absorption spectrometry method (GFAAS) |
12/30218308 DC : 0 | BS ISO 17378-1 - WATER QUALITY - DETERMINATION OF ARSENIC AND ANTIMONY - PART 1: METHOD USING HYDRIDE GENERATION ATOMIC FLUORESCENCE SPECTROMETRY(HG-AFS) |
12/30262095 DC : 0 | BS EN ISO 17234-1 - LEATHER - CHEMICAL TESTS FOR THE DETERMINATION OF CERTAIN AZO COLORANTS IN DYED LEATHERS - PART 1: DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS |
DD CEN ISO/TS 17764-2:2006 | Animal feeding stuffs. Determination of the content of fatty acids Gas chromatographic method |
12/30249839 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
BS 6068-2.84(2003) : 2003 | WATER QUALITY - DETERMINATION OF TRACE ELEMENTS USING ATOMIC ABSORPTION SPECTROMETRY WITH GRAPHITE FURNACE |
13/30250829 DC : 0 | BS ISO 17293-1 - SURFACE ACTIVE AGENTS - DETERMINATION OF CHLOROACETIC ACID (CHLOROACETATE) IN SURFACTANTS - PART 1: HPLC METHOD |
DIN EN ISO 3961:2013-12 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF IODINE VALUE (ISO 3961:2013) |
BS 3900-B17:1991 | Methods of test for paints Preparation of acid extracts from dried paint films |
BS EN ISO 17489:2013 | Leather. Chemical tests. Determination of tan content in synthetic tanning agents |
18/30318762 DC : 0 | BS ISO 20258 - MAGNESIUM LITHIUM ALLOYS - DETERMINATION OF LITHIUM - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
I.S. EN 14820:2004 | SINGLE-USE CONTAINERS FOR HUMAN VENOUS BLOOD SPECIMEN COLLECTION |
DD CEN/TS 15606:2009 | Foodstuffs. Determination of acesulfame-K, aspartame, neohesperidine-dihydrochalcone and saccharin. High performance liquid chromatographic method |
PREN 14526 : DRAFT 2015 | FOODSTUFFS - DETERMINATION OF SAXITOXIN-GROUP TOXINS IN SHELLFISH - HPLC METHOD USING PRE-COLUMN DERIVATIZATION WITH PEROXIDE OR PERIODATE OXIDATION |
I.S. EN ISO 5814:2012 | Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012)<br> |
I.S. EN 16924:2017 | FOODSTUFFS - DETERMINATION OF ZEARALENONE IN EDIBLE VEGETABLE OILS BY LC-FLD OR LC-MS/MS |
I.S. EN 14582:2016 | CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
ISO 13310:1997 | Iron ores Determination of zinc content Flame atomic absorption spectrometric method |
14/30296389 DC : 0 | BS EN ISO 7864 - STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS |
BIS IS 15937 : 2011 | MEAT AND MEAT PRODUCTS - DETERMINATION OF CHLORAMPHENICOL CONTENT - METHOD USING LIQUID CHROMATOGRAPHY |
I.S. EN ISO 10704:2015 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD (ISO 10704:2009) |
13/30267139 DC : 0 | BS EN 12596 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY BY VACUUM CAPILLARY |
I.S. EN 14362-1:2012 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 1: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE WITH AND WITHOUT EXTRACTING THE FIBRES |
I.S. EN ISO 9020:1998 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF FREE-FORMALDEHYDE CONTENT OF AMINO RESINS - SODIUM SULFITE TITRIMETRIC METHOD |
BIS IS 16197-5 : 2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 5: CADMIUM, LEAD AND CHROMIUM IN POLYMERS AND ELECTRONICS AND CADMIUM AND LEAD IN METALS BY AAS, AFS, ICP-OES AND ICP-MS |
13/30253357 DC : 0 | BS ISO 17293-2 - SURFACE ACTIVE AGENTS - DETERMINATION OF CHLOROACETIC ACID (CHLOROACETATE) IN SURFACTANTS - PART 2: IONIC CHROMATOGRAPHIC METHOD |
ISO 11438-1:1993 | Ferronickel Determination of trace-element content by electrothermal atomic absorption spectrometric method Part 1: General requirements and sample dissolution |
UNE-EN 15074:2015 | Chemicals used for treatment of swimming pool water - Ozone |
I.S. EN ISO 15496:2004 | TEXTILES - MEASUREMENT OF WATER VAPOUR PERMEABILITY OF TEXTILES FOR THE PURPOSE OF QUALITY CONTROL (ISO 15496:2018) |
BS 684-2.21(1995) : 1995 AMD 10667 | METHODS OF ANALYSIS OF FATS AND FATTY OILS - OTHER METHODS - DETERMINATION OF LEAD CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION METHOD |
BS EN ISO 14403-1:2012 | Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Method using flow injection analysis (FIA) |
16/30314847 DC : 0 | BS EN ISO 28706-3 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL OR A TETRAGONAL GLASS BOTTLE |
BS ISO 18068:2014 | Cotton fibres. Test method for sugar content. Spectrophotometry |
04/30116842 DC : DRAFT JUL 2004 | ISO 12078 - ANHYDROUS MILK FAT - DETERMINATION OF STEROL COMPOSITION BY GAS LIQUID CHROMATOGRAPHY (REFERENCE METHOD) |
ISO 7766-1:1993 | Photography — Processing wastes — Analysis of cyanides — Part 1: Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry |
UNE-EN ISO 17730:2015 | Dentistry - Fluoride varnishes (ISO 17730:2014) |
PD CEN ISO/TS 16189:2013 | Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine dimethylformamide in footwear materials |
15/30301224 DC : 0 | BS EN ISO 5402-1 - LEATHER - DETERMINATION OF FLEX RESISTANCE - PART 1: FLEXOMETER METHOD |
UNE-EN ISO 28706-2:2017 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017) |
ISO 13545:2000 | Lead sulfide contentrates Determination of lead content EDTA titration method after acid digestion |
BS 2000-272(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF MERCAPTAN SULFUR AND HYDROGEN SULFIDE CONTENT OF LIQUEFIED PETROLEUM GASES (LPG) - ELECTROMETRIC TITRATION METHOD |
DIN EN 16155:2012-06 | Foodstuffs - Determination of sucralose - High performance liquid chromatographic method |
UNE-EN 16421:2015 | Influence of materials on water for human consumption - Enhancement of microbial growth (EMG) |
I.S. EN 12014-3:2005 | FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 3: SPECTROMETRIC DETERMINATION OF NITRATE AND NITRITE CONTENT OF MEAT PRODUCTS AFTER ENZYMATIC REDUCTION OF NITRATE TO NITRITE |
EN ISO 8871-3:2004 | Elastomeric parts for parenterals and for devices for pharmaceuticals use - Part 3: Determination of released-particle count (ISO 8871-3:2003) |
UNE-EN ISO 11731:2017 | Water quality - Enumeration of Legionella (ISO 11731:2017) |
ISO 11277:2009 | Soil quality Determination of particle size distribution in mineral soil material Method by sieving and sedimentation |
UNE-EN 16801:2016 | Foodstuffs - Determination of elements and their chemical species - Determination of methylmercury in foodstuffs of marine origin by isotope dilution GC-ICP-MS |
07/30164125 DC : 0 | BS ISO 20795-1 - DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS |
I.S. EN ISO 21563:2013 | DENTISTRY - HYDROCOLLOID IMPRESSION MATERIALS (ISO 21563:2013) |
I.S. EN ISO 3961:2013 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF IODINE VALUE (ISO 3961:2013) |
BS EN 15562:2009 | Fertilizers. Determination of cyanamide nitrogen |
BS EN ISO 16198:2015 | Soil quality. Plant-based test to assess the environmental bioavailability of trace elements to plants |
BS 2000-315(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - ELECTRICAL INSULATING OILS - DETECTION OF CORROSIVE SULFUR |
BS EN 15905:2010 | Fertilizers. Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC) |
BS ISO 17322:2015 | Fertilizers and soil conditioners. Analytical methods for Sulfur Coated Urea (SCU) |
UNE-EN 15626:2016 | Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method |
CEI EN 60601-2-24 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-24: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFUSION PUMPS AND CONTROLLERS |
BS ISO 27108 : 2010 | WATER QUALITY - DETERMINATION OF SELECTED PLANT TREATMENT AGENTS AND BIOCIDE PRODUCTS - METHOD USING SOLID-PHASE MICROEXTRACTION (SPME) FOLLOWED BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
UNE-ISO 6588-1:2013 | Paper, board and pulps. Determination of pH of aqueous extracts. Part 1: Cold extraction |
UNE-CEN/TS 16233-1:2012 EX | Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh - Part 1: Determination of astaxanthin and canthaxanthin |
DD CEN/TS 15749 : DRAFT SEP 2008 | FERTILIZERS - DETERMINATION OF SULFATES CONTENT USING THREE DIFFERENT METHODS |
10/30214551 DC : 0 | BS ISO 20126 - DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS |
17/30328613 DC : 0 | BS ISO 20418-2 - TEXTILES - QUALITATIVE AND QUANTITATIVE PROTEOMIC ANALYSIS OF SOME ANIMAL HAIR FIBRES - PART 2: PEPTIDE DETECTION USING MALDI-TOF MS |
16/30333773 DC : 0 | BS ISO 20595 - WATER QUALITY - DETERMINATION OF SELECTED EASILY VOLATILE ORGANIC COMPOUNDS IN WATER - METHOD USING GAS CHROMATOGRAPHY AND MASS SPECTROMETRY BY STATIC HEADSPACE TECHNIQUE (HS-GC-MS) |
15/30322585 DC : 0 | BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
UNI EN ISO 4619 : 2011 | DRIERS FOR PAINTS AND VARNISHES |
BS ISO 15237 : 2016 | SOLID MINERAL FUELS - DETERMINATION OF TOTAL MERCURY CONTENT OF COAL |
07/30161895 DC : 0 | BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
BS EN 62321-5:2014 | Determination of certain substances in electrotechnical products Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
UNE-EN ISO 12870:2014 | Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2012) |
BS ISO 19746:2017 | Determination of urea content in urea-based fertilizers by high performance liquid chromatography (HPLC) |
BS ISO 17299-3:2014 | Textiles. Determination of deodorant property Gas chromatography method |
BS EN ISO 4629-1:2016 | Binders for paints and varnishes. Determination of hydroxyl value Titrimetric method without using a catalyst |
BS EN 16328:2012 | Fertilizers. Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP). Method using high-performance liquid chromatography (HPLC) |
10/30235405 DC : 0 | BS EN 890 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) SULFATE, LIQUID |
FD T90 187-1 : 2010 FD | WATER QUALITY - DETERMINATION OF GLYPHOSATE AND AMINOMETHYLPHOSPHONIC ACID (AMPA) - PART 1: ANALYSIS METHOD BY LIQUID CHROMATOGRAPHY WITH FLUORIMETRIC DETECTION USING POST-COLUMN DERIVATION |
UNI EN 15933 : 2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF PH |
UNI EN 16109 : 2012 | FERTILIZERS - DETERMINATION OF COMPLEXED MICRO-NUTRIENT IONS IN FERTILIZERS - IDENTIFICATION OF LIGNOSULFONATES |
UNI EN 4171 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF PHOSPHORIC ACID INDEX |
06/30146953 DC : DRAFT FEB 2006 | ISO 835 - LABORATORY GLASSWARE - GRADUATED PIPETTES |
DIN 51083-5:2003-09 | TESTING OF CERAMIC MATERIALS - CHEMICAL ANALYSIS OF ALUMOSILICATES - PART 5: DETERMINATION OF TITANIUM OXIDE |
ISO 15825:2017 | Rubber compounding ingredients — Carbon black — Determination of aggregate size distribution by disc centrifuge photosedimentometry |
13/30262098 DC : 0 | BS EN ISO 3380 - LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF SHRINKAGE TEMPERATURE UP TO 100 DEGREES C |
UNI CEN/TS 15621 : 2008 | ANIMAL FEEDING STUFFS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE, COBALT AND MOLYBDENUM AFTER PRESSURE DIGESTION BY ICP-AES |
UNI ISO 6225-2 : 2008 | RUBBER, RAW, NATURAL - DETERMINATION OF CASTOR OIL CONTENT - PART 2: DETERMINATION OF TOTAL RICINOLEIC ACID CONTENT BY GAS CHROMATOGRAPHY |
BS EN ISO 18465:2017 | Microbiology of the food chain. Quantitative determination of emetic toxin (cereulide) using LC-MS/MS |
I.S. EN ISO 1567:2000 | DENTISTRY - DENTURE BASE POLYMERS |
09/30195265 DC : 0 | BS ISO 11349 - WATER QUALITY - DETERMINATION OF LIPOPHILIC SUBSTANCES OF LOW VOLATILITY - GRAVIMETRIC METHOD |
12/30208986 DC : 0 | BS ISO 13933 - STEEL AND IRON - DETERMINATION OF CALCIUM AND MAGNESIUM - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
PD ISO/TS 16727:2013 | Soil quality. Determination of mercury. Cold vapour atomic fluorescence spectrometry (CVAFS) |
BS EN 15911:2010 | Foodstuffs. Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection |
15/30317863 DC : 0 | BS EN 14176 - FOODSTUFFS - DETERMINATION OF DOMOIC ACID IN RAW SHELLFISH, RAW FINFISH AND COOKED MUSSELS BY RP-HPLC USING UV DETECTION |
UNI EN 152 : 2012 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS OF A PRESERVATIVE TREATMENT AGAINST BLUE STAIN IN WOOD IN SERVICE - LABORATORY METHOD |
UNI EN 16370 : 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORIDE FOR ON SITE ELECTROCHLORINATION USING MEMBRANE CELLS |
10/30213522 DC : DRAFT JUNE 2010 | BS ISO 15202-2 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY - PART 2: SAMPLE PREPARATION |
I.S. EN ISO 2114:2000 | PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE |
I.S. EN ISO 7785-1:1999 | DENTAL HANDPIECES - PART 1: HIGH-SPEED AIR TURBINE HANDPIECES |
NF EN ISO 10309 : 2016 | METALLIC COATINGS - POROSITY TESTS - FERROXYL TEST |
15/30250137 DC : 0 | BS EN ISO 8502-9 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 9: FIELD METHOD FOR THE CONDUCTOMETRIC DETERMINATION OF WATER-SOLUBLE SALTS |
DIN EN 14997:2015-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
DD ISO/TS 22304:2008 | Tobacco. Determination of tobacco specific nitrosamines. Method using alkaline dichloromethane extraction |
13/30276246 DC : 0 | BS EN 16317 - FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
14/30286320 DC : 0 | BS ISO 18611-1 - SHIPS AND MARINE TECHNOLOGY - MARINE NOX REDUCTION AGENT AUS 40 - PART 1: QUALITY REQUIREMENTS |
BS ISO 18325:2015 | Geosynthetics. Test method for the determination of water discharge capacity for prefabricated vertical drains |
13/30273308 DC : 0 | BS EN ISO 3826-4 - PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 4: APHAERESIS BLOOD BAG SYSTEMS WITH INTEGRATED FEATURES |
03/312776 DC : DRAFT AUG 2003 | BS ISO 14502-1 - TEST METHODS FOR SUBSTANCES CHARACTERISTIC OF GREEN AND BLACK TEA - DETERMINATION OF TOTAL POLYPHENOLS IN TEA - COLORIMETRIC METHOD USING FOLIN-CIOCALTEU REAGENT |
I.S. EN ISO 11498:1999 | DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRICAL MOTORS |
07/30168855 DC : 0 | BS EN ISO 10139-2 - DENTISTRY - SOFT LINING MATERIALS FOR REMOVABLE DENTURES - PART 2: MATERIALS FOR LONG-TERM USE |
06/30112308 DC : 0 | EN ISO 13530 - WATER QUALITY - GUIDANCE ON ANALYTICAL QUALITY CONTROL FOR CHEMICAL AND PHYSICOCHEMICAL WATER ANALYSIS |
DIN EN ISO 16960:2015-02 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS - DETERMINATION OF TOTAL SULFUR BY OXIDATIVE MICROCOULOMETRY METHOD (ISO 16960:2014) |
03/319406 DC : 0 | EN 14805 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORIDE FOR ON SITE ELECTROCHLORINATION |
CSA Z15883-5:09 (R2019) | Washer-disinfectors - Part 5: Test soils and methods for demonstrating cleaning efficacy (Adopted ISO/TS 15883-5:2005, first edition, 2005-11-15) |
BS EN 10361:2015 | Alloyed steels. Determination of nickel content. Inductively coupled plasma optical emission spectrometric method |
17/30337204 DC : 0 | BS EN ISO 5815-1 - WATER QUALITY - DETERMINATION OF BIOCHEMICAL OXYGEN DEMAND AFTER N DAYS (BOD[N]) - PART 1: DILUTION AND SEEDING METHOD WITH ALLYLTHIOUREA ADDITION |
UNE-EN 16857:2018 | Foodstuffs - Determination of benzene in soft drinks, other beverages and vegetable-based infant foods by headspace gas chromatography mass spectrometry (HS-GC-MS) |
DD ENV 12038:2002 | Durability of wood and wood-based products. Wood-based panels. Method of test for determining the resistance against wood-destroying basidiomycetes |
14/30280956 DC : 0 | BS ISO 18643 - FERTILIZERS AND SOIL CONDITIONERS - DETERMINATION OF BIURET CONTENT OF UREA-BASED FERTILIZERS - HPLC METHOD |
DIN EN ISO 17694:2016-10 | FOOTWEAR - TEST METHODS FOR UPPERS AND LINING - FLEX RESISTANCE (ISO 17694:2016) |
03/313977 DC : DRAFT NOV 2003 | EN 1204 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MONOCALCIUM PHOSPHATE |
BS 2000-581(2009) : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
BS 2000-136.2(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF SAPONIFICATION NUMBER - POTENTIOMETRIC TITRATION METHOD |
BS EN 16086-2:2011 | Soil improvers and growing media. Determination of plant response Petri dish test using cress |
BS 2000-454(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF PHOSPHORUS IN GASOLINE - SPECTROPHOTOMETRIC METHOD |
I.S. EN ISO 22254:2005 | DENTISTRY - MANUAL TOOTHBRUSHES - RESISTANCE OF TUFTED PORTION TO DEFLECTION |
11/30229694 DC : 0 | BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
BS 2000-552(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD |
BS EN 2434-003:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish Flexible and high fluid resistance for interior |
BS EN ISO 16784-2:2008 | Corrosion of metals and alloys. Corrosion and fouling in industrial cooling water systems Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig |
PD ISO/TS 17988:2014 | Dentistry. Corrosion test methods for dental amalgam |
10/30201950 DC : 0 | BS EN ISO 5667-3 - WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES |
04/30114861 DC : 0 | BS ISO 21268-2 - SOIL QUALITY - LEACHING - PART 2: BATCH TEST USING A LIQUID TO SOLID RATIO OF 10 L/KG DRY MATTER |
BS EN 16006:2011 | Animal feeding stuffs. Determination of the sum of fumonisin B1 & B2 in compound animal feed with immunoaffinity clean-up and RP-HPLC with fluorescence detection after pre- or postcolumn derivatisation |
I.S. EN 15360:2007 | FERTILIZERS - DETERMINATION OF DICYANDIAMIDE - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
BS EN ISO 15091:2012 | Paints and varnishes. Determination of electrical conductivity and resistance |
I.S. EN 14863:2006 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF THE EDGE COVERING ON ENAMELLED STEEL PLATE TO BE USED IN HEAT EXCHANGERS |
BS EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods |
BS ISO 18066:2015 | Textiles. Manmade filament yarns. Determination of shrinkage in boiling water |
06/30155669 DC : DRAFT SEP 2006 | ISO 22961 - TITANIUM AND TITANIUM ALLOYS - DETERMINATION OF IRON - ATOMIC ABSORPTION SPECTROMETRY |
DIN ISO 8130-3 E : 2005 | COATING POWDERS - PART 3: DETERMINATION OF DENSITY BY LIQUID DISPLACEMENT PYKNOMETER |
BS ISO 6710:1995 | Single-use containers for venous blood specimen collection |
DIN EN ISO 17226-1:2008-08 | LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 1: METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
10/30219703 DC : 0 | BS EN 16086-2 - SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PLANT RESPONSE - PART 2: PETRI DISH TEST USING CRESS |
15/30328790 DC : 0 | BS EN 13249 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION) |
BS ISO 21484:2017 | Nuclear Energy. Fuel technology. Determination of the O/M ratio in MOX pellets by the gravimetric method |
09/30196698 DC : 0 | BS ISO 2811-1 - PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 1: PYKNOMETER METHOD |
ISO 11466:1995 | Soil quality — Extraction of trace elements soluble in aqua regia |
15/30324871 DC : 0 | BS EN 47 - WOOD PRESERVATIVES - DETERMINATION OF THE TOXIC VALUES AGAINST LARVAE OF HYLOTRUPES BAJULUS (LINNAEUS) - (LABORATORY METHOD) |
07/30169159 DC : 0 | BS ISO 28706-3 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL |
DIN EN ISO 1248:2008-06 | Iron oxide pigments - Specifications and methods of test (ISO 1248:2006, including Technical Corrigendum 1:2007) |
DIN EN ISO 12846:2012-08 | Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012) |
BS 6049-9:1999 | Methods of test for tea Determination of crude fibre content |
08/30175752 DC : DRAFT JAN 2008 | BS ISO 3987 - PETROLEUM PRODUCTS - DETERMINATION OF SULFATED ASH IN LUBRICATING OILS AND ADDITIVES |
13/30240170 DC : 0 | BS ISO 16365-3 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 3: DISTINCTION BETWEEN ETHER AND ESTER POLYURETHANES BY DETERMINATION OF THE ESTER GROUP CONTENT |
UNI EN ISO 10873 : 2010 | DENTISTRY - DENTURE ADHESIVES |
08/30181228 DC : DRAFT APR 2008 | BS EN ISO 21627-1 - PLASTICS - EPOXY RESINS - DETERMINATION OF CHLORINE CONTENT - PART 1: INORGANIC CHLORINE |
NF EN ISO 5403-1 : 2012 | LEATHER - DETERMINATION OF WATER RESISTANCE OF FLEXIBLE LEATHER - PART 1: REPEATED LINEAR COMPRESSION (PENETROMETER) |
96/708571 DC : 0 | ISO/CD 15349-1 - UNALLOYED STEEL - DETERMINATION OF LOW CARBON CONTENT - PART 1: INFRARED ABSORPTION METHOD WITH PEAK SEPARATION PROCEDURE AFTER COMBUSTION IN AN ELECTRICAL RESISTANCE FURNACE |
06/19977151 DC : DRAFT JUN 2006 | BS ISO 13779-3 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 3: CHEMICAL ANALYSIS AND CHARACTERIZATION OF CRYSTALLINITY AND PHASE PURITY |
BS EN 16278:2012 | Animal feeding stuffs. Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE) |
08/30168815 DC : DRAFT MAR 2008 | BS EN ISO 4049 - DENTISTRY - POLYMER-BASED RESTORATIVE MATERIALS |
14/30267954 DC : 0 | BS EN ISO 16373-1 - TEXTILES - DYESTUFFS - PART 1: GENERAL PRINCIPLES OF TESTING COLOURED TEXTILES FOR DYESTUFF IDENTIFICATION |
BS ISO 7766-1:1993 | Photography. Processing wastes. Analysis of cyanides. Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry |
DD EN ISO/TS 17234 : 2003 | LEATHER - CHEMICAL TESTS - DETERMINATION OF CERTAIN AZO COLOURANTS IN DYED LEATHERS |
04/30091671 DC : DRAFT APR 2004 | BS EN ISO 483 - PLASTICS - SMALL ENCLOSURES FOR CONDITIONING AND TESTING USING AQUEOUS SOLUTIONS TO MAINTAIN HUMIDITY AT CONSTANT VALUE |
BS EN ISO 11731-2:2008 | Water quality. Detection and enumeration of Legionella Direct membrane filtration method for waters with low bacterial counts |
BS EN ISO 10720:2007 | Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas |
13/30264749 DC : 0 | BS ISO 18068 - COTTON FIBERS - TEST METHOD FOR SUGAR CONTENT - SPECTROPHOTOMETRY |
BS 6200-3.40.2:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of nickel content |
16/30332214 DC : 0 | BS EN ISO 9917-2 - DENTISTRY - WATER-BASED CEMENTS - PART 2: RESIN-MODIFIED CEMENTS |
BS 6068-2.98(2006) : 2006 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING A COMBINED PRESERVATION AND DIGESTION STEP FOLLOWED BY ATOMIC FLUORESCENCE SPECTROMETRY |
DIN EN 15410:2011-11 | Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
BS EN 62321-8:2017 | Determination of certain substances in electrotechnical products Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) |
ISO 13781:2017 | Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing |
16/30341731 DC : 0 | BS EN 12014-2 - FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 2: HPLC/IC METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLE PRODUCTS |
12/30258105 DC : 0 | BS EN 71-12 - SAFETY OF TOYS - PART 12: N-NITROSAMINES AND N-NITROSATABLE SUBSTANCES |
03/105714 DC : DRAFT MAR 2003 | ISO 24234 - DENTISTRY - MERCURY AND ALLOYS FOR DENTAL AMALGAM |
BS EN ISO 17075-2:2017 | Leather. Chemical determination of chromium(VI) content in leather Chromatographic method |
BS EN 16618:2015 | Food analysis. Determination of acrylamide in food by liquid chromatography tandem mass spectrometry (LC-ESI-MS/MS) |
16/30344116 DC : 0 | BS ISO 16793 AMD 1 - NUCLEAR FUEL TECHNOLOGY - GUIDE FOR CERAMOGRAPHIC PREPARATION OF UO[2] SINTERED PELLETS FOR MICROSTRUCTURE EXAMINATION |
BS ISO 13933:2014 | Steel and iron. Determination of calcium and magnesium. Inductively coupled plasma atomic emission spectrometric method |
ISO 10238:1999 | Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Determination of sulfur content by an instrumental method |
BS ISO 2596:2006 | Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric, Karl Fischer and mass-loss methods |
BS 6068-2.75(2002) : 2002 | WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE BY CONTINUOUS FLOW ANALYSIS |
DIN EN 1568-2:2016-08 (Draft) | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 2: SPECIFICATION FOR HIGH EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
08/30179301 DC : DRAFT MAY 2008 | BS EN 15475 - FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
BS 6068-2.93(2005) : 2005 | WATER QUALITY - DETERMINATION OF AMMONIUM NITROGEN - METHOD BY FLOW ANALYSIS (CFA AND FIA) AND SPECTROMETRIC DETECTION |
08/30179316 DC : DRAFT MAY 2008 | BS EN 15558 - FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO ULSCH |
DIN EN ISO 1135-5:2016-06 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015) |
DD ISO/PAS 22241-2:2005 | Diesel engines. NOx reduction agent AUS 32 Test methods |
BS EN 15850:2010 | Foodstuffs. Determination of zearalenone in maize based baby food, barley flour, maize flour, polenta, wheat flour and cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection |
12/30258200 DC : 0 | BS EN 12123 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE |
DIN EN 15475:2009-04 | FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
13/30255634 DC : 0 | BS ISO 976 - RUBBER AND PLASTICS - POLYMER DISPERSIONS AND RUBBER LATICES - DETERMINATION OF PH |
BS EN 16620:2015 | Food analysis. Determination of furan in coffee and coffee products by headspace gas chromatography and mass spectrometry (HS GC-MS) |
DIN EN ISO 12228-1:2014-10 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS (ISO 12228-1:2014) |
BS EN ISO 21563:2013 | Dentistry. Hydrocolloid impression materials |
12/30261556 DC : 0 | BS ISO 5163 - PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
BS EN ISO 20863:2004 | Footwear. Test method for stiffeners and toepuffs. Bondability |
BS ISO 7766:2003 | Processing photographic wastes. Analysis of cyanides. Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry |
BS ISO 11376 : 1997 AMD 13327 | PLASTICS - EPOXY RESINS AND GLYCIDYL ESTERS - DETERMINATION OF INORGANIC CHLORINE |
17/30328201 DC : 0 | BS ISO 13169 - WATER QUALITY - URANIUM - TEST METHOD USING ALPHA LIQUID SCINTILLATION COUNTING |
09/30201918 DC : 0 | BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS |
03/313979 DC : DRAFT NOV 2003 | EN 1206 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - TETRASODIUM PYROPHOSPHATE |
BS ISO 17690:2015 | Water quality. Determination of available free cyanide (pH 6) using flow injection analysis (FIA), gas-diffusion and amperometric detection |
I.S. EN ISO 17230:2011 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF WATER PENETRATION PRESSURE (ISO 17230:2006) |
BS EN 16087-1:2011 | Soil improvers and growing media. Determination of the aerobic biological activity Oxygen uptake rate (OUR) |
PREN 938 : DRAFT 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORITE |
DIN EN ISO 5402-1:2015-04 (Draft) | LEATHER - DETERMINATION OF FLEX RESISTANCE - PART 1: FLEXOMETER METHOD (ISO 5402-1:2017) |
ISO 3839:1996 | Petroleum products — Determination of bromine number of distillates and aliphatic olefins — Electrometric method |
PREN 12121 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM DISULFITE |
DIN EN ISO 18857-2:2012-01 | Water quality - Determination of selected alkylphenols - Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation (ISO 18857-2:2009) |
14/30263828 DC : 0 | BS ISO 18069 - CORROSION OF METALS AND ALLOYS - METHOD FOR DETERMINATION OF THE UNIFORM CORROSION RATE OF STAINLESS STEELS AND NICKEL BASED ALLOYS IN AQUEOUS SOLUTIONS |
BS EN 15411:2011 | Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
I.S. EN 17050:2017 | ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF IODINE IN ANIMAL FEED BY ICP-MS |
14/30309761 DC : 0 | BS EN ISO 11997-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
02/120873 DC : DRAFT FEB 2002 | BS EN 14362-2 -TEXTILES - METHODS FOR DETECTION AND DETERMINATION OF CERTAIN LISTED AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 2: EXTRACTION TEST ON COLOURED TEXTILES - DETECTION OF THE USE OF CERTAIN AZO COLORANTS IN FIBRES WITH EXTRACTABLE DYES |
ISO 15681-2:2003 | Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 2: Method by continuous flow analysis (CFA) |
ISO 10153:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method |
EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
PREN 15550 : DRAFT 2016 | ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
I.S. EN ISO 19074:2015 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF WATER ABSORPTION BY CAPILLARY ACTION (WICKING) (ISO 19074:2015) |
02/106396 DC : DRAFT NOV 2002 | BS EN 14582 - CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
DIN EN 16691:2015-12 | WATER QUALITY - DETERMINATION OF SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
DIN EN 15028:2013-01 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORATE |
PREN 15487 : DRAFT 2006 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD |
PREN 1568-1 : DRAFT 2016 | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 1: SPECIFICATION FOR MEDIUM EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
BS ISO 4802-2:2016 | Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by flame spectrometry and classification |
BS 3900-F16(1997) : 1997 AMD 13289 | METHODS OF TEST FOR PAINTS - RESISTANCE TO ARTIFICIAL WEATHERING (UV RADIATION AND WATER) |
BS EN ISO 15193:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures |
BS ISO 10390:2005 | Soil quality. Determination of pH |
PREN 12123 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE |
08/30193639 DC : 0 | BS EN ISO 105-C06 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING |
UNI EN ISO 19250 : 2013 | WATER QUALITY - DETECTION OF SALMONELLA SPP. |
EN 16858:2017 | Foodstuffs - Determination of melamine and cyanuric acid in foodstuffs by liquid chromatography and tandem mass spectrometry (LC-MS/MS) |
UNI EN ISO 28888 : 2013 | DENTISTRY - SCREENING METHOD FOR EROSION POTENTIAL OF ORAL RINSES ON DENTAL HARD TISSUES |
BS ISO 17378-2:2014 | Water quality. Determination of arsenic and antimony Method using hydride generation atomic absorption spectrometry (HG-AAS) |
BS ISO 16560:2015 | Surface active agents. Determination of polyethylene glycol content in nonionic ethoxylated surfactants. HPLC method |
UNI EN 16278 : 2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF INORGANIC ARSENIC BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HG-AAS) AFTER MICROWAVE EXTRACTION AND SEPARATION BY SOLID PHASE EXTRACTION (SPE) |
S.R. CEN/TS 15750:2008 | FERTILIZERS - DETERMINATION OF DIFFERENT FORMS OF NITROGEN IN FERTILIZERS CONTAINING NITROGEN ONLY AS NITRIC, AMMONIACAL AND UREA NITROGEN BY TWO DIFFERENT METHODS |
DIN EN 15721:2013-12 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
03/301321 DC : DRAFT JAN 2003 | ISO 8858-3 - HARD COAL - FROTH FLOTATION - PART 3: EVALUATION OF FLOTATION CHARACTERISTICS |
UNI EN 15891 : 2010 | FOODSTUFFS - DETERMINATION OF DEOXYNIVALENOL IN CEREALS, CEREAL PRODUCTS AND CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND UV DETECTION |
UNI EN ISO 16266 : 2008 | WATER QUALITY - DETECTION AND ENUMERATION OF PSEUDOMONAS AERUGINOSA - METHOD BY MEMBRANE FILTRATION |
BS EN ISO 19071:2016 | Leather. Chemical tests. Determination of chromium (VI) and the reductive potential for chromium tanning agents |
DIN EN 15040:2014-06 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - PHOSPHONIC ACIDS AND SALTS |
BS EN ISO 16591:2010 | Petroleum products. Determination of sulfur content. Oxidative microcoulometry method |
BS ISO 15247:2015 | Zinc sulfide concentrates. Determination of silver content. Acid dissolution and flame atomic absorption spectrometric method |
BS EN ISO 105-B07:2009 | Textiles. Tests for colour fastness Colour fastness to light of textiles wetted with artificial perspiration |
NF EN 62321 : 2009 | ELECTROTECHNICAL PRODUCTS - DETERMINATION OF LEVELS OF SIX REGULATED SUBSTANCES (LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS, POLYBROMINATED DIPHENYL ETHERS) |
DIN EN 15408:2011-05 | Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
06/30126102 DC : DRAFT FEB 2006 | ISO 10304 - WATER QUALITY - DETERMINATION OF DISSOLVED BROMIDE, CHLORIDE, FLUORIDE, NITRATE, NITRITE, PHOSPHATE AND SULFATE - METHOD BY LIQUID CHROMATOGRAPHY OF IONS |
17/30360605 DC : 0 | BS EN ISO 4045 - LEATHER - CHEMICAL TESTS - DETERMINATION OF PH AND DIFFERENCE FIGURE |
06/30147369 DC : 0 | EN 15492 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - ION CHROMATOGRAPHIC METHOD |
14/30290346 DC : 0 | BS EN ISO 18465 - MICROBIOLOGY OF THE FOOD CHAIN - QUANTITATIVE ANALYSIS OF EMETIC TOXIN (CEREULIDE) USING LC-MS/MS |
S.R. CEN TS 15606:2009 | FOODSTUFFS - DETERMINATION OF ACESULFAME-K, ASPARTAME, NEOHESPERIDINE-DIHYDROCHALCONE AND SACCHARIN - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
BS 2000-555(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD |
BS ISO 9073-11:2002 | Textiles. Test methods for nonwovens Run-off |
15/30324942 DC : 0 | BS EN 16924 - FOODSTUFFS - DETERMINATION OF ZEARALENONE IN EDIBLE VEGETABLE OILS BY LC-FLD OR LC-MS/MS |
S.R. CWA 17253-1:2018 | JOINT IMPLANTS - PART 1: NOVEL METHODS FOR ISOLATING WEAR PARTICLES FROM JOINT REPLACEMENTS AND RELATED DEVICES |
BS 684-2.50(2000) : 2000 AMD 13300 | METHODS OF ANALYSIS OF FATS AND FATTY OILS - PART 2: OTHER METHODS SECTION 2.50: DETERMINATION OF CADMIUM CONTENT BY DIRECT GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY |
12/30257907 DC : 0 | BS EN 15482 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM PERMANGANATE |
04/19988922 DC : 0 | EN 4171 - AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE ACID PHOSPHORIC INDEX |
BS EN 15410:2011 | Solid recovered fuels. Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
14/30303657 DC : 0 | BS EN ISO 1135-3 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SET FOR SINGLE USE |
UNE 38861:2012 | Titanium and titanium alloys. Determination of iron. Molecular absorption spectrometry using 1,10-phenanthroline. |
UNE-EN ISO 4629-1:2016 | Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without using a catalyst (ISO 4629-1:2016) |
BS EN ISO 14362-3:2017 | Textiles. Methods for determination of certain aromatic amines derived from azo colorants Detection of the use of certain azo colorants, which may release 4-aminoazobenzene |
18/30358025 DC : 0 | BS ISO 21676 - WATER QUALITY - DETERMINATION OF SELECTED ACTIVE PHARMACEUTICAL INGREDIENTS, TRANSFORMATION PRODUCTS AND OTHER ORGANIC SUBSTANCES IN WATER AND TREATED WASTE WATER - METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY AND MASS SPECTROMETRIC DETECTION (HPLC-MS/MS OR - HRMS) AFTER DIRECT INJECTION |
ISO 17319:2015 | Fertilizers and soil conditioners Determination of water-soluble potassium content Potassium tetraphenylborate gravimetric method |
BS EN 15891:2010 | Foodstuffs. Determination of deoxynivalenol in cereals, cereal products and cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and UV detection |
BS EN 16877:2016 | Animal feeding stuffs. Methods of sampling and analysis. Determination of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials and compound feed by LCMS |
UNE-EN 13523-27:2017 | Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test) |
UNE-EN 16618:2015 | Food analysis - Determination of acrylamide in food by liquid chromatography tandem mass spectrometry (LC-ESI-MS/MS) |
UNE-EN ISO 17230:2011 | Leather - Physical and mechanical tests - Determination of water penetration pressure (ISO 17230:2006) |
I.S. EN 13585:2002 | FOODSTUFFS - DETERMINATION OF FUMONISINS B1 AND B2 IN MAIZE - HPLC METHOD WITH SOLID PHASE EXTRACTION CLEAN-UP |
BS ISO 13312:2017 | Iron ores. Determination of potassium. Flame atomic absorption spectrometric method |
I.S. EN 16711-1:2015 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
DIN EN 15751 E : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
DIN 50451-1:2003-04 | Determination of trace elements in liquids for use in semiconductor technology - Part 1: Determination of calcium, copper, gold, iron, potassium, silver and sodium in nitric acid by atomic absorption spectrometry |
03/309708 DC : 0 | EN ISO 19250 - WATER QUALITY - DETERMINATION OF SALMONELLA SPECIES |
DIN ISO 19730:2009-07 | SOIL QUALITY - EXTRACTION OF TRACE ELEMENTS FROM SOIL USING AMMONIUM NITRATE SOLUTION |
I.S. EN 839:2014 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST WOOD DESTROYING BASIDIOMYCETES - APPLICATION BY SURFACE TREATMENT |
BS EN ISO 12782-1:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of amorphous iron oxides and hydroxides with ascorbic acid |
ISO 10633-1:1995 | Oilseed residues — Determination of glucosinolates content — Part 1: Method using high-performance liquid chromatography |
13/30276412 DC : 0 | BS EN ISO 4829-2 - STEEL AND IRONS - DETERMINATION OF TOTAL SILICON CONTENT - REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD - PART 2: SILICON CONTENTS BETWEEN 0,01 AND 0,05% |
02/122892 DC : DRAFT JULY 2002 | BS EN ISO 6271-1 - CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE - PART 1: VISUAL METHOD |
13/30261099 DC : 0 | BS ISO 17947 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS FOR CHEMICAL ANALYSIS OF FINE SILICON NITRIDE POWDERS |
UNE-EN 16693:2016 | Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS) |
10/30215342 DC : 0 | BS EN ISO 5403-2 - LEATHER - DETERMINATION OF WATER RESISTANCE OF FLEXIBLE LEATHER - PART 2: REPEATED ANGULAR COMPRESSION (MAESER) |
DIN EN 15477:2015-03 (Draft) | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
12/30268245 DC : 0 | BS EN 12175 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HEXAFLUOROSILICIC ACID |
DIN EN 16801:2016-07 | FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - DETERMINATION OF METHYLMERCURY IN FOODSTUFFS OF MARINE ORIGIN BY ISOTOPE DILUTION GC-ICP-MS |
BS EN ISO 10309:2016 | Metallic coatings. Porosity tests. Ferroxyl test |
01/563679 DC : DRAFT SEP 2001 | BS ISO 11731-2 - WATER QUALITY - DETECTION AND ENUMERATION OF LEGIONELLA - PART 2: DIRECT MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL COUNTS |
09/30208728 DC : 0 | BS EN 13038 - SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
12/30260010 DC : 0 | BS EN 16421 - INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
DIN EN 15562:2009-06 | Fertilizers - Determination of cyanamide nitrogen |
IP 575 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
I.S. EN 16502:2014 | TEST METHOD FOR THE DETERMINATION OF THE DEGREE OF SOIL ACIDITY ACCORDING TO BAUMANN-GULLY |
BS 7891(1997) : 1997 AMD 13008 | DETERMINATION OF RESISTANCE AGAINST AUTOCLAVING, CORROSION AND THERMAL EXPOSURE FOR SURGICAL AND DENTAL HAND INSTRUMENTS |
UNI CEN/TS 16187 : 2011 | FOODSTUFFS - DETERMINATION OF FUMONISIN B1 AND FUMONISIN B2 IN PROCESSED MAIZE CONTAINING FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION AFTER PRECOLUMN DERIVATIZATION |
ISO 6732:2010 | Milk and milk products — Determination of iron content — Spectrometric method (Reference method) |
BS 7755-3.14(2002) : 2002 | SOIL QUALITY - DETERMINATION OF REDOX POTENTIAL - FIELD METHOD |
DIN 10370:1998-06 | MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF ACETATE CONTENT |
BS EN ISO 14088:2012 | Leather. Chemical tests. Quantitative analysis of tanning agents by filter method |
18/30369605 DC : 0 | BS ISO 4629-3 - BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF HYDROXYL VALUE - PART 3: RAPID TEST |
UNI EN 4503 : 2014 | AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - TEST METHOD - DETERMINATION OF WATER SOLUBLE CHLORIDE AND SULFATE OF AQUEOUS EXTRACTS |
BS EN ISO 14403-2:2012 | Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Method using continuous flow analysis (CFA) |
12/30258102 DC : 0 | BS EN 71-3 - SAFETY OF TOYS - PART 3: MIGRATION OF CERTAIN ELEMENTS |
S.R. CEN ISO TS 21268-1:2009 | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 1: BATCH TEST USING A LIQUID TO SOLID RATIO OF 2 L/KG DRY MATTER |
DD CEN/TS 15083-2:2005 | Durability of wood and wood-based products. Determination of the natural durability of solid wood against wood-destroying fungi, test methods Soft-rotting micro-fungi |
BS EN ISO 11206:2013 | Water quality. Determination of dissolved bromate. Method using ion chromatography (IC) and post column reaction (PCR) |
BS 3900-K1(2001) : 2001 AMD 15245 | METHODS OF TEST FOR PAINTS - GROUP K: DETERMINATION OF RELEASE RATES OF BIOCIDES FROM ANTIFOULING PAINTS - PART K1: GENERAL METHOD FOR EXTRACTION OF BIOCIDES |
ISO 14897:2002 | Plastics — Polyols for use in the production of polyurethane — Determination of water content |
DD CEN/TS 16233-2:2011 | Foodstuffs. HPLC method for the determination of xanthophylls in fish flesh Identification of the enantiomer ratio of astaxanthin |
07/30158191 DC : DRAFT AUG 2007 | BS ISO 28641 - RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS |
BS 7079-F13(1994) : 1994 AMD 9848 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON METALLIC BLASTCLEANING ABRASIVES - DETERMINATION OF APPARENT DENSITY |
UNI CEN/TS 14417 : 2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF WETTING-DRYING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
NF ISO 10704 : 2010 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD |
08/30187764 DC : 0 | BS EN 14133 - FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN WINE AND BEER - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEAN-UP |
UNI EN 15835 : 2010 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
ISO 3961:2013 | Animal and vegetable fats and oils Determination of iodine value |
08/30182464 DC : DRAFT JUNE 2008 | BS ISO 20370 - MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF ACETATE CONTENT |
UNI EN 15452 : 2008 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY O,P-EDDHA BY REVERSED PHASE HPLC |
PD CEN/TS 17060:2017 | Fertilizers. Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline |
ISO 19746:2017 | Determination of urea content in urea-based fertilizers by high performance liquid chromatography (HPLC) |
BS EN 15962:2011 | Fertilizers. Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients |
ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
UNI EN 15791 : 2009 | ANIMAL FEEDING STUFFS - DETERMINATION OF DEOXYNIVALENOL IN ANIMAL FEED - HPLC METHOD WITH UV DETECTION AND IMMUNOAFFINITY COLUMN CLEAN-UP |
14/30261900 DC : 0 | BS EN 16711-2 - TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
PREN 15195 : DRAFT 2013 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
PREN 46-2 : DRAFT 2015 | WOOD PRESERVATIVES - DETERMINATION OF THE PREVENTIVE ACTION AGAINST RECENTLY HATCHED LARVAE OF HYLOTRUPES BAJULUS (LINNAEUS) - PART 2: OVICIDAL EFFECT (LABORATORY METHOD) |
02/563622 DC : DRAFT AUG 2002 | BS EN ISO 1562 - DENTISTRY - CASTING GOLD ALLOYS |
12/30235356 DC : 0 | BS ISO 16424 - NUCLEAR ENERGY - EVALUATION OF HOMOGENEITY OF GD DISTRIBUTION WITHIN GADOLINIUM FUEL BLENDS AND DETERMINATION OF GD[2]O[3] CONTENT IN GADOLINIUM FUEL PELLETS BY MEASUREMENTS OF URANIUM AND GADOLINIUM ELEMENTS |
PREN 13523-8 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
18/30368510 DC : 0 | BS EN ISO 21268-4 - SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 4: INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
09/30196481 DC : 0 | BS ISO 105-B02 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST |
16/30349859 DC : 0 | BS EN ISO 4098 - LEATHER - CHEMICAL TESTS - DETERMINATION OF WATER-SOLUBLE MATTER, WATER-SOLUBLE INORGANIC MATTER AND WATER-SOLUBLE ORGANIC MATTER |
DIN EN 15492:2012-04 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
10/30199670 DC : 0 | BS ISO 11262 - SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE |
UNI EN 14397-1 : 2010 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CARBON DIOXIDE - PART 1: METHOD FOR SOLID FERTILIZERS |
BS ISO 17293-1:2014 | Surface active agents. Determination of chloroacetic acid (chloroacetate) in surfactants HPLC method |
BS EN 15792:2009 | Animal feeding stuffs. Determination of zearalenone in animal feed. High performance liquid chromatographic method with fluorescence detection and immunoaffinity column clean-up |
BS ISO 14869-3:2017 | Soil quality. Dissolution for the determination of total element content Dissolution with hydrofluoric, hydrochloric and nitric acids using pressurised microwave technique |
DIN EN ISO 12228-1 E : 2014 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS (ISO 12228-1:2014) |
PREN 15621 : DRAFT 2016 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
PREN 12174 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE |
09/30200146 DC : 0 | BS EN ISO 20344 - PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR |
BS 3900-G8(1993) : 1993 AMD 8356 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO LIQUIDS. WATER IMMERSION METHOD |
DIN EN ISO 17075-1 E : 2017 | LEATHER - CHEMICAL DETERMINATION OF CHROMIUM(6) CONTENT IN LEATHER - PART 1: COLORIMETRIC METHOD (ISO 17075-1:2017) |
ISO 10378:2016 | Copper, lead and zinc sulfide concentrates Determination of gold and silver Fire assay gravimetric and flame atomic absorption spectrometric method |
BS ISO 15681-2 : 2003 AMD 15546 | WATER QUALITY - DETERMINATION OF ORTHOPHOSPHATE AND TOTAL PHOSPHORUS CONTENTS BY FLOW ANALYSIS (FIA AND CFA) - PART 2: METHOD BY CONTINUOUS FLOW ANALYSIS (CFA) |
ISO/TS 16179:2012 | Footwear — Critical substances potentially present in footwear and footwear components — Determination of organotin compounds in footwear materials |
17/30366325 DC : 0 | BS EN ISO 3104 - PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY |
14/30314669 DC : 0 | BS EN ISO 4629-2 - BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF HYDROXYL VALUE - PART 2: TITRIMETRIC METHOD USING A CATALYST |
DD CEN/TS 15558:2007 | Fertilizers. Determination of nitric and ammoniacal nitrogen according to Ulsch |
17/30360629 DC : 0 | BS EN ISO 17226-2 - LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 2: METHOD USING COLORIMETRIC ANALYSIS |
04/30114859 DC : 0 | BS ISO 21268-1 - SOIL QUALITY - LEACHING - PART 1: BATCH TEST USING A LIQUID TO SOLID RATIO OF 2 L/KG DRY MATTER |
PREN 15721 : DRAFT 2012 | ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
UNI CEN/TS 16170 : 2013 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ELEMENTS USING INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
DIN 38404-3:2005-07 | German standard methods for the examination of water, waste water and sludge - Physical and physical-chemical parameters (group C) - Part 3: Determination of spectral absorption in the UV range, spectral absorption coefficient (C 3) |
BS EN 62321-7-1:2015 | Determination of certain substances in electrotechnical products Determination of the presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method |
16/30318704 DC : 0 | BS EN ISO 18640-1 - PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - PHYSIOLOGICAL IMPACT - PART 1: MEASUREMENT OF COUPLED HEAT AND MASS TRANSFER WITH THE SWEATING TORSO |
BS ISO 1999:2013 | Acoustics. Estimation of noise-induced hearing loss |
10/30213243 DC : 0 | BS EN 14362-1 - TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 1: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE WITH AND WITHOUT EXTRACTING THE FIBRES |
96/708573 DC : 0 | ISO/CD 15349-3 - UNALLOYED STEEL - DETERMINATION OF LOW CARBON CONTENT - PART 3: INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN ELECTRICAL RESISTANCE FURNACE |
DIN EN ISO 5398-2:2009-06 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 2: QUANTIFICATION BY COLORIMETRIC DETERMINATION |
12/30258767 DC : 0 | BS EN 14164 - FOODSTUFFS - DETERMINATION OF VITAMIN B6 BY HPLC |
DIN EN 16651:2015-07 | FERTILIZERS - DETERMINATION OF N-(N-BUTYL)THIOPHOSPHORIC ACID TRIAMIDE (NBPT) AND N-(N-PROPYL)THIOPHOSPHORIC ACID TRIAMIDE (NPPT) - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
DD CEN/TS 15562:2007 | Fertilizers. Determination of cyanamide nitrogen |
BS EN 16811-1:2016 | Winter service equipment and products. De-icing agents Sodium chloride. Requirements and test methods |
BS ISO 17947:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of fine silicon nitride powders |
BS 5665-5(1993) : 1993 | SAFETY OF TOYS - PART 5: CHEMICAL TOYS (SETS) OTHER THAN EXPERIMENTAL SETS |
BS EN 15475:2009 | Fertilizers. Determination of ammoniacal nitrogen |
BS ISO 16424 : 2012 | NUCLEAR ENERGY - EVALUATION OF HOMOGENEITY OF GD DISTRIBUTION WITHIN GADOLINIUM FUEL BLENDS AND DETERMINATION OF GD[2]O[3] CONTENT IN GADOLINIUM FUEL PELLETS BY MEASUREMENTS OF URANIUM AND GADOLINIUM ELEMENTS |
BS ISO 22241-1:2006 | Diesel engines. NOx reduction agent AUS 32 Quality requirements |
UNI CEN ISO/TS 16179 : 2012 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - DETERMINATION OF ORGANOTIN COMPOUNDS IN FOOTWEAR MATERIALS |
18/30318765 DC : 0 | BS ISO 20260 - MAGNESIUM AND MAGNESIUM ALLOYS - DETERMINATION OF MERCURY |
DIN EN ISO 15351:2010-08 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
06/30153324 DC : DRAFT JULY 2006 | BS ISO 6668 - GREEN COFFEE - PREPARATION OF SAMPLES FOR USE IN SENSORY ANALYSIS |
12/30237225 DC : 0 | BS EN ISO 16187 - FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - ANTIBACTERIAL ACTIVITY |
09/30199361 DC : 0 | BS EN 12829 - SURFACE ACTIVE AGENTS - PREPARATION OF WATER WITH KNOWN CALCIUM HARDNESS |
BS 6068-4.12:1998 | Water quality. Microbiological methods Detection and enumeration of Legionella |
BS ISO 16632:2013 | Tobacco and tobacco products. Determination of water content.Gas-chromatographic method |
09/30210257 DC : 0 | BS EN 13614 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
18/30370852 DC : 0 | BS ISO 22241-2 - DIESEL ENGINES - NOX REDUCTION AGENT AUS 32 - PART 2: TEST METHODS |
BS ISO 14898 : 1999 | PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANE - DETERMINATION OF ACIDITY |
BS 3900-F14(1995) : 1995 AMD 9931 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ARTIFICIAL WEATHERING BY EXPOSURE TO FILTERED XENON-ARC RADIATION |
98/125140 DC : DRAFT OCT 98 | DRAFT BS EN ISO 8655-2 - PISTON-OPERATED VOLUMETRIC INSTRUMENTS - PART 2: PISTON PIPETTES |
BS 3900-B11:1986 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Determination of total chromium content of liquid matter |
ISO 6588-1:2012 | Paper, board and pulps Determination of pH of aqueous extracts Part 1: Cold extraction |
03/103004 DC : DRAFT JAN 2003 | ISO 20863 - FOOTWEAR - TEST METHODS FOR STIFFENERS AND TOEPUFFS - BONDABILITY |
DIN EN 16319:2016-03 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
BS ISO 6488:2004 | Tobacco and tobacco products. Determination of water Content. Karl Fischer method |
DIN EN 16024:2011-06 | Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
BS EN ISO 16373-1:2015 | Textiles. Dyestuffs General principles of testing coloured textiles for dyestuff identification |
I.S. EN ISO 4829-2:2016 | STEELS - DETERMINATION OF TOTAL SILICON CONTENTS - REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD - PART 2: SILICON CONTENTS BETWEEN 0,01% AND 0,05% (ISO 4829-2:2016) |
02/564997 DC : 0 | BS ISO 16265 - WATER QUALITY - DETERMINATION OF MBAS INDEX - METHOD BY FLOW ANALYSIS (CFA AND FIA) |
PD ISO/TS 17182:2014 | Soil quality. Determination of some selected phenols and chlorophenols. Gas chromatographic method with mass spectrometric detection |
BS ISO 20481:2008 | Coffee and coffee products. Determination of the caffeine content using high performance liquid chromatography (HPLC). Reference method |
17/30367120 DC : 0 | BS EN ISO 17678 - MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
BS EN 15560:2009 | Fertilizers. Determination of total nitrogen in calcium cyanamide nitrate free |
BS EN 15890:2010 | Foodstuffs. Determination of patulin in fruit juice and fruit based purée for infants and young children. HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection |
DIN EN 14397-1:2010-07 | Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers |
I.S. EN 2434-001:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 001: BASIC REQUIREMENTS |
API 13I REDLINE : 2009 | RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS |
I.S. EN ISO 27108:2013 | WATER QUALITY - DETERMINATION OF SELECTED PLANT TREATMENT AGENTS AND BIOCIDE PRODUCTS - METHOD USING SOLID-PHASE MICROEXTRACTION (SPME) FOLLOWED BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) (ISO 27108:2010) |
DIN ISO 15923-1 E : 2014 | WATER QUALITY - DETERMINATION OF SELECTED PARAMETERS BY DISCRETE ANALYSIS SYSTEMS - PART 1: AMMONIUM, NITRATE, NITRITE, CHLORIDE, ORTHOPHOSPHATE, SULFATE AND SILICATE WITH PHOTOMETRIC DETECTION (ISO 15923-1:2013) |
08/30190491 DC : 0 | BS ISO 11702 - ANIMAL AND VEGETABLE FATS AND OILS - ENZYMATIC DETERMINATION OF TOTAL STEROLS CONTENT |
08/30175103 DC : DRAFT OCT 2008 | BS ISO 27108 - WATER QUALITY - DETERMINATION OF SELECTED PLANT TREATMENT AGENTS AND BIOCIDE PRODUCTS - METHOD USING SOLID-PHASE MICRO EXTRACTION (SPME) FOLLOWED BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
BS EN ISO 15181-5:2008 | Paints and varnishes. Determination of release rate of biocides from antifouling paints Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract |
PREN 71-3 : DRAFT 2012 | SAFETY OF TOYS - PART 3: MIGRATION OF CERTAIN ELEMENTS |
03/315985 DC : DRAFT DEC 2003 | WATER QUALITY - ISOLATION AND ENUMERATION OF CRYPTOSPORIDIUM OOCYSTS AND GIARDIA CYSTS FROM WATER |
BS ISO 14435:2005 | Carbonaceous materials for the production of aluminium. Petroleum coke. Determination of trace metals by inductively coupled plasma atomic emission spectrometry |
PREN ISO 5164 : DRAFT 2012 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO/DIS 5164:2012) |
UNI EN 15560 : 2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN CALCIUM CYANAMIDE NITRATE FREE |
UNI EN 15478 : 2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
ISO 18643:2016 | Fertilizers and soil conditioners Determination of biuret content of urea-based fertilizers HPLC method |
PREN 49-1 : DRAFT 2015 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST ANOBIUM PUNCTATUM (DE GEER) BY EGGLAYING AND LARVAL SURVIVAL - PART 1: APPLICATION BY SURFACE TREATMENT (LABORATORY METHOD) |
12/30252071 DC : 0 | BS ISO 16145-4 - SHIPS AND MARINE TECHNOLOGY - PROTECTIVE COATINGS AND INSPECTION METHOD - PART 4: AUTOMATED MEASURING METHOD FOR THE TOTAL AMOUNT OF WATER-SOLUBLE SALTS |
14/30260117 DC : 0 | BS ISO 6495-1 - ANIMAL FEEDING STUFFS - DETERMINATION OF WATER-SOLUBLE CHLORIDES CONTENT - PART 1: TITRIMETRIC METHOD |
00/562035 DC : DRAFT MAY 2000 | ISO 17190-11 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISATION - PART 11: DETERMINATION OF CONTENT OF RESPIRABLE PARTICLES |
04/30099822 DC : DRAFT JUL 2004 | ISO 17858 - WATER QUALITY - DETERMINATION OF DIOXIN-LIKE POLYCHLORINATED BIPHENYLS - METHOD USING GASCHROMATOGRAPHY/MASS SPECTROMETRY |
BS EN 4171:2011 | Aerospace series. Paints and varnishes. Test method for determination of phosphoric acid index |
BS ISO 16740:2005 | Workplace air. Determination of hexavalent chromium in airborne particulate matter. Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide |
BS EN ISO 4938:2016 | Steel and iron. Determination of nickel content. Gravimetric or titrimetric method |
BS ISO 10705-4:2001 | Water quality. Detection and enumeration of bacteriophages Enumeration of bacteriophages infecting $7IBacteriodes fragilis$7R |
UNE-EN ISO 18218-2:2015 | Leather - Determination of ethoxylated alkylphenols - Part 2: Indirect method (ISO 18218-2:2015) |
16/30324261 DC : 0 | BS EN ISO 20701 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO SALIVA |
BS 4401-18:1998 | Methods of test for meat and meat products Determination of starch and glucose contents (enzymatic method) |
DD CEN/TS 15452:2006 | Fertilizers. Determination of chelating agents. Determination of iron chelated by o,p-EDDHA by reversed phase HPLC |
BS 6782-16.2(2000) : 2000 AMD 15239 | BINDERS FOR PAINTS AND VARNISHES - PART 16: METHODS OF TEST FOR ALKYD RESINS - SECTION 16.2: DETERMINATION OF PHTHALIC ANHYDRIDE CONTENT |
BS ISO 14849:1999 | Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Indophenol method |
DD CEN/TS 14417:2005 | Geosynthetic barriers. Test method for the determination of the influence of wetting/drying cycles on the permeability of clay geosynthetic barriers |
PREN 13038 : DRAFT 2009 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
09/30168908 DC : DRAFT FEB 2009 | BS ISO 28319 - DENTISTRY - SUITABILITY OF METALLIC MATERIALS FOR LASER WELDING |
DIN EN 16109:2012-01 | Fertilizers - Determination of complexed micro-nutrient ions in fertilizers - Identification of lignosulfonates |
BS ISO 105-C09 : 2001 AMD 15184 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING. OXIDATIVE BLEACH RESPONSE USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR |
BS EN ISO 22288:2009 | Leather. Physical and mechanical tests. Determination of flex resistance by the vamp flex method |
EN ISO 3681:1998 | Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:1996) |
04/30125823 DC : DRAFT NOV 2004 | ISO 17092 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF CORROSION RESISTANCE OF MONOLITHIC CERAMICS IN ACID AND ALKALINE SOLUTIONS |
08/30186903 DC : DRAFT OCT 2008 | BS EN 1014-4 - WOOD PRESERVATIVES - CREOSOTE AND CREOSOTED TIMBER - METHODS OF SAMPLING AND ANALYSIS - PART 4: DETERMINATION OF THE WATER-EXTRACTABLE PHENOLS CONTENT OF CREOSOTE |
17/30352977 DC : 0 | BS ISO 15029-2 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF SPRAY IGNITION CHARACTERISTICS OF FIRE-RESISTANT FLUIDS - PART 2: SPRAY TEST - STABILIZED FLAME HEAT RELEASE METHOD |
15/30328775 DC : 0 | BS EN 13250 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS |
UNE-EN 15039:2014 | Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polycarboxilic acids and salts |
03/313974 DC : DRAFT NOV 2003 | EN 1201 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MONOPOTASSIUM DIHYDROGEN ORTHOPHOSPHATE |
ISO 15923-1:2013 | Water quality — Determination of selected parameters by discrete analysis systems — Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection |
ISO 13779-3:2008 | Implants for surgery Hydroxyapatite Part 3: Chemical analysis and characterization of crystallinity and phase purity |
PREN 1406 : DRAFT 2015 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MODIFIED STARCHES |
BS EN 16206:2012 | Animal feeding stuffs. Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) |
UNE-EN ISO 10309:2017 | Metallic coatings - Porosity tests - Ferroxyl test (ISO 10309:1994) |
PD ISO/TS 17379-2:2013 | Water quality. Determination of selenium Method using hydride generation atomic absorption spectrometry (HGAAS) |
BS 2000-222(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY BY VACUUM CAPILLARY |
BS EN 15074:2014 | Chemicals used for treatment of swimming pool water. Ozone |
BS 6068-2.99(2006) : 2006 | WATER QUALITY - DETERMINATION OF SELECTED POLYBROMINATED DIPHENYL ETHERS IN SEDIMENT AND SEWAGE SLUDGE - METHOD USING EXTRACTION AND GAS CHROMATOGRAPHY/MASS SPECTROMETRY |
BS 2000-557(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE |
BS 3900-A21(1998) : 1998 AMD 13283 | METHODS OF TEST FOR PAINTS - DETERMINATION OF DENSITY BY THE OSCILLATION METHOD |
PREN 14984 : DRAFT 2014 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
BS EN ISO 11260:2011 | Soil quality. Determination of effective cation exchange capacity and base saturation level using barium chloride solution |
PREN 12386 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE |
BS 684-2.46:1998 | Methods of analysis of fats and fatty oils. Other methods Determination of tocopherols and tocotrienols contents |
BS ISO 22960:2008 | Titanium and titanium alloys. Determination of iron. Molecular absorption spectrometry using 1, 10- phenanthroline |
BS ISO 21048:2014 | Plastics. Epoxy resins. Determination of 1,2-glycol content |
BS EN ISO 20795-1:2013 | Dentistry. Base polymers Denture base polymers |
I.S. EN 15607:2009 | FOODSTUFFS - DETERMINATION OF D-BIOTIN BY HPLC |
I.S. EN 16852:2017 | FOODSTUFFS - DETERMINATION OF ETHYL CARBAMATE IN STONE FRUIT SPIRITS, FRUIT MARC SPIRITS AND OTHER SPIRIT DRINKS - GC-MS METHOD |
PREN 12120 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN SULFITE |
BS 6782-5.1(2004) : 2004 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD |
BS ISO 17852 : 2006 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING A COMBINED PRESERVATION AND DIGESTION STEP FOLLOWED BY ATOMIC FLUORESCENCE SPECTROMETRY |
03/105707 DC : DRAFT MAR 2003 | BS EN ISO 21530 - DENTISTRY - DETERMINATION OF RESISTANCE TO CHEMICAL DISINFECTANTS OF MATERIALS USED FOR DENTAL EQUIPMENT SURFACES |
17/30304358 DC : 0 | BS ISO 19619 - SURFACE ACTIVE AGENTS - DETERMINATION OF FREE PROPYLENE OXIDE CONTENT IN PROPYLENE OXIDE ADDUCTS PRODUCTS - GC METHOD |
I.S. EN ISO 28706-3:2018 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL OR A TETRAGONAL GLASS BOTTLE (ISO 28706-3:2017) |
PREN 15492 : DRAFT 2010 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
02/120652 DC : DRAFT FEB 2002 | ISO/DIS 20843 - PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CLASSES HFA AND HFC |
09/30173553 DC : 0 | BS ISO 10873 - DENTISTRY - DENTURE ADHESIVES |
I.S. EN ISO 10477:2004 | DENTISTRY - POLYMER-BASED CROWN AND BRIDGE MATERIALS |
I.S. EN ISO 14719:2011 | CHEMICAL ANALYSIS OF REFRACTORY MATERIAL GLASS AND GLAZES - DETERMINATION OF FE[2+] AND FE[3+] BY THE SPECTRAL PHOTOMETRIC METHOD WITH 1,10-PHENANTHROLINE (ISO 14719:2011) |
ISO 19448:2018 | Dentistry — Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode |
I.S. EN ISO 17304:2013 | DENTISTRY - POLYMERIZATION SHRINKAGE: METHOD FOR DETERMINATION OF POLYMERIZATION SHRINKAGE OF POLYMER-BASED RESTORATIVE MATERIALS (ISO 17304:2013) |
ISO 11435:2011 | Nickel alloys Determination of molybdenum content Inductively coupled plasma/atomic emission spectrometric method |
XP CEN ISO/TS 21268-3 : 2009 XP | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 3: UP-FLOW PERCOLATION TEST |
DIN ISO 1409:2008-11 | PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DETERMINATION OF SURFACE TENSION BY THE RING METHOD |
DIN EN ISO 12782-3:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid (ISO 12782-3:2012) |
ISO 17372:2008 | Animal feeding stuffs — Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography |
UNI EN 16204 : 2012 | FOODSTUFFS - DETERMINATION OF LIPOPHILIC ALGAL TOXINS (OKADAIC ACID GROUP TOXINS, YESSOTOXINS, AZASPIRACIDS, PECTENOTOXINS) IN SHELLFISH AND SHELLFISH PRODUCTS BY LC-MS/MS |
ISO 16604:2004 | Clothing for protection against contact with blood and body fluids Determination of resistance of protective clothing materials to penetration by blood-borne pathogens Test method using Phi-X 174 bacteriophage |
ISO 3400:1997 | Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method |
DIN EN ISO 5814:2013-02 | Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012) |
PREN 2436-2 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 02: HIGH CORROSION RESISTANCE |
UNI EN 16169 : 2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF KJELDAHL NITROGEN |
PREN 2436-4 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 04: HIGH CORROSION AND FLUID RESISTANCE WITH SURFACE PREPARATION TOLERANCE |
UNI CEN/TS 16320 : 2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
I.S. EN 15769:2009 | ETHANOL AS A BLENDING COMPONENT OF PETROL - DETERMINATION OF APPEARANCE - VISUAL METHOD |
I.S. EN 16109:2011 | FERTILIZERS - DETERMINATION OF COMPLEXED MICRO-NUTRIENT IONS IN FERTILIZERS - IDENTIFICATION OF LIGNOSULFONATES |
I.S. EN 14397-1:2010 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CARBON DIOXIDE - PART 1: METHOD FOR SOLID FERTILIZERS |
UNE-EN 15750:2010 | Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
EN ISO 10703:2015 | Water quality - Determination of the activity concentration of radionuclides - Method by high resolution gamma-ray spectrometry (ISO 10703:2007) |
ISO 6493:2000 | Animal feeding stuffs Determination of starch content Polarimetric method |
UNI EN 15475 : 2009 | FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
ISO 11534:2006 | Iron ores Determination of tin Flame atomic absorption spectrometric method |
PREN 2436-5 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING PRIMER - PART 05: FOR EXTERIOR USE WITH SURFACE PREPARATION TOLERANCE |
CEI EN 60754-2 : 2015 | TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 2: DETERMINATION OF ACIDITY (BY PH MEASUREMENT) AND CONDUCTIVITY |
ISO 17586:2016 | Soil quality Extraction of trace elements using dilute nitric acid |
UNI EN ISO 15181-4 : 2008 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 4: DETERMINATION OF PYRIDINE-TRIPHENYLBORANE (PTPB) CONCENTRATION IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
UNI EN 15608 : 2008 | SURFACE ACTIVE AGENTS - QUANTITATIVE DETERMINATION OF FREE FATTY ACID IN ALKYLAMIDOPROPYLBETAINES - GAS-CHROMATOGRAPHIC METHOD |
UNI EN ISO 12782-1 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 1: EXTRACTION OF AMORPHOUS IRON OXIDES AND HYDROXIDES WITH ASCORBIC ACID |
ISO 5794-1:2010 | Rubber compounding ingredients Silica, precipitated, hydrated Part 1: Non-rubber tests |
UNI EN ISO 12228-1 : 2014 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS |
ISO 13163:2013 | Water quality Lead-210 Test method using liquid scintillation counting |
DEFSTAN 91-6/4(2001) : 2001 AMD 1 2002 | GREASE, PLUG VALVE, HYDROCARBON RESISTANT NATO CODE: G-363 JOINT SERVICE DESIGNATION: XG-235 |
ISO 17211:2015 | Stationary source emissions Sampling and determination of selenium compounds in flue gas |
PREN 898 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN CARBONATE |
S.R. CEN ISO TS 21268-2:2009 | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 2: BATCH TEST USING A LIQUID TO SOLID RATIO OF 10 L/KG DRY MATTER |
ISO 19619:2018 | Surface active agents — Determination of free propylene oxide content in propylene oxide adduct surfactants — GC method |
I.S. EN 60661:2014 | METHODS FOR MEASURING THE PERFORMANCE OF ELECTRIC HOUSEHOLD COFFEE MAKERS |
ISO 21613:2015 | (U, Pu)O2 Powders and sintered pellets — Determination of chlorine and fluorine |
ISO 17190-1:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 1: Determination of pH |
ISO 4045:2008 | Leather Chemical tests Determination of pH |
ISO 14502-1:2005 | Determination of substances characteristic of green and black tea Part 1: Content of total polyphenols in tea Colorimetric method using Folin-Ciocalteu reagent |
ISO 9697:2015 | Water quality Gross beta activity in non-saline water Test method using thick source |
PREN 47 : DRAFT 2015 | WOOD PRESERVATIVES - DETERMINATION OF THE TOXIC VALUES AGAINST LARVAE OF HYLOTRUPES BAJULUS (LINNAEUS) - (LABORATORY METHOD) |
UNI CEN/TS 15968 : 2010 | Determination of extractable perfluoro octane sulfonate (PFOS) in solid, coated and impregnated articles, in liquids and fire-fighting foams - Method for sampling, extraction and analysis by means of LC-qMS or LC-MS |
I.S. EN ISO 9073-11:2005 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 11: RUN-OFF |
ISO 8199:2005 | Water quality General guidance on the enumeration of micro-organisms by culture |
UNI EN 16357 : 2013 | CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
UNE-EN 15781:2010 | Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation |
I.S. EN ISO 10416:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
BS 2000-139(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF ACID OR BASE NUMBER - COLOUR-INDICATOR TITRATION METHOD |
UNE-EN 15040:2015 | Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Phosphonic acids and salts |
ISO 17943:2016 | Water quality Determination of volatile organic compounds in water Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS) |
BS 2000-356(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD |
S.R. CEN TS 15412:2010 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF METALLIC ALUMINIUM |
I.S. EN 16317:2013 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
ISO 25705:2016 | Fertilizers Determination of urea condensates using high-performance liquid chromatography (HPLC) Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
I.S. ISO 6713:1988 | PAINTS AND VARNISHES - PREPARATION OF ACID EXTRACTS FROM PAINTS IN LIQUID OR POWDER FORM |
I.S. EN 16877:2016 | ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF T-2 AND HT-2 TOXINS, DEOXYNIVALENOL AND ZEARALENONE, IN FEED MATERIALS AND COMPOUND FEED BY LC-MS |
UNE-EN ISO 5814:2013 | Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012) |
UNE-EN ISO 20795-2:2013 | Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013) |
I.S. CEN ISO TS 17764-1:2006 | ANIMAL FEEDING STUFFS - DETERMINATION OF THE CONTENT OF FATTY ACIDS - PART 1: PREPARATION OF METHYL ESTERS |
BS 2000-365(1996) : 1996 | METHOD OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM AND PETROLEUM PRODUCTS - DETERMINATION OF DENSITY - OSCILLATING U-TUBE METHOD |
BS 2000-236(2014) : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
I.S. CEN TS 15479:2006 | FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
S.R. CEN/TS 16233-2:2011 | FOODSTUFFS - HPLC METHOD FOR THE DETERMINATION OF XANTHOPHYLLS IN FISH FLESH - PART 2: IDENTIFICATION OF THE ENANTIOMER RATIO OF ASTAXANTHIN |
I.S. EN ISO 5398-2:2009 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 2: QUANTIFICATION BY COLORIMETRIC DETERMINATION |
CSA Z15883-5:2009 | WASHER-DISINFECTORS - PART 5: TEST SOILS AND METHODS FOR DEMONSTRATING CLEANING EFFICACY |
UNE-EN 15492:2012 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
I.S. EN ISO 10873:2010 | DENTISTRY - DENTURE ADHESIVES |
UNE-EN ISO 12228-2:2015 | Determination of individual and total sterols contents - Gas chromatographic method - Part 2: Olive and olive pomace oils (ISO 12228-2:2014) |
UNE-EN 16847:2016 | Fertilizers - Determination of complexing agents in fertilizers - Identification of heptagluconic acid by chromatography |
IP 412 : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS |
PREN 939 : DRAFT 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HYDROCHLORIC ACID |
I.S. EN ISO 14362-1:2017 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 1: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE WITH AND WITHOUT EXTRACTING THE FIBRES (ISO 14362-1:2017) |
I.S. EN ISO 8871-3:2004 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICALS USE - PART 3: DETERMINATION OF RELEASED-PARTICLE COUNT |
BIS IS 1448-27 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 27: DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
I.S. EN ISO 16424:2017 | NUCLEAR ENERGY - EVALUATION OF HOMOGENEITY OF GD DISTRIBUTION WITHIN GADOLINIUM FUEL BLENDS AND DETERMINATION OF GD[2]O[3] CONTENT IN GADOLINIUM FUEL PELLETS BY MEASUREMENTS OF URANIUM AND GADOLINIUM ELEMENTS (ISO 16424:2012) |
UNI EN 10351 : 2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD] |
I.S. EN ISO 8199:2007 | WATER QUALITY - GENERAL GUIDANCE ON THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
ISO 7203-2:2011 | Fire extinguishing media Foam concentrates Part 2: Specification for medium- and high-expansion foam concentrates for top application to water-immiscible liquids |
I.S. EN 60754-2:2014 | TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 2: DETERMINATION OF ACIDITY (BY PH MEASUREMENT) AND CONDUCTIVITY |
I.S. EN ISO 11206:2013 | WATER QUALITY - DETERMINATION OF DISSOLVED BROMATE - METHOD USING ION CHROMATOGRAPHY (IC) AND POST COLUMN REACTION (PCR) (ISO 11206:2011) |
I.S. EN 15039:2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - POLYCARBOXILIC ACIDS AND SALTS |
I.S. EN 15030:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SILVER SALTS FOR INTERMITTENT USE |
I.S. EN ISO 17226-3:2011 | LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 3: DETERMINATION OF FORMALDEHYDE EMISSIONS FROM LEATHER |
S.R. CEN/TS 16677:2014 | OPHTHALMIC OPTICS - REFERENCE METHOD FOR THE TESTING OF SPECTACLE FRAMES AND SUNGLASSES FOR NICKEL RELEASE |
I.S. EN ISO 4045:2008 | LEATHER - CHEMICAL TESTS - DETERMINATION OF PH |
BS EN 16317 : 2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
I.S. EN ISO 15329:2008 | CORROSION OF METALS AND ALLOYS - ANODIC TEST FOR EVALUATION OF INTERGRANULAR CORROSION SUSCEPTIBILITY OF HEAT-TREATABLE ALUMINIUM ALLOYS |
NF ISO 11262 : 2012 | SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE |
I.S. EN ISO 16373-1:2015 | TEXTILES - DYESTUFFS - PART 1: GENERAL PRINCIPLES OF TESTING COLOURED TEXTILES FOR DYESTUFF IDENTIFICATION (ISO 16373-1:2015) |
I.S. EN ISO 19250:2013 | WATER QUALITY - DETECTION OF SALMONELLA SPP. (ISO 19250:2010) |
I.S. EN 16087-1:2011 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF THE AEROBIC BIOLOGICAL ACTIVITY - PART 1: OXYGEN UPTAKE RATE (OUR) |
ISO 29441:2010 | Water quality Determination of total nitrogen after UV digestion Method using flow analysis (CFA and FIA) and spectrometric detection |
I.S. EN 16173:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DIGESTION OF NITRIC ACID SOLUBLE FRACTIONS OF ELEMENTS |
CEI EN 62321-4 : 2016 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 4: MERCURY IN POLYMERS, METALS AND ELECTRONICS BY CV-AAS, CV-AFS, ICP-OES AND ICP-MS |
BS EN ISO 13017 : 2012 | DENTISTRY - MAGNETIC ATTACHMENTS |
EN ISO 13160:2015 | Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012) |
I.S. EN 10351:2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD] |
I.S. ENV 14226:2002 | ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR CERAMIC POWDERS - DETERMINATION OF CALCIUM, MAGNESIUM, IRON AND ALUMINIUM IN SILICON NITRIDE BY USING FLAME ATOMIC ABSORPTION SPECTROSCOPY (FAAS) OR INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROSCOPY (ICP-AES) |
ISO 20481:2008 | Coffee and coffee products — Determination of the caffeine content using high performance liquid chromatography (HPLC) — Reference method |
S.R. CEN TS 15562:2007 | FERTILIZERS - DETERMINATION OF CYANAMIDE NITROGEN |
I.S. EN ISO 17226-1:2008 | LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 1: METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
BS EN 62321-4 : 2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 4: MERCURY IN POLYMERS, METALS AND ELECTRONICS BY CV-AAS, CV-AFS, ICP-OES AND ICP-MS |
BIS IS/ISO 6865 : 2000 | ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FIBRE CONTENT - METHOD WITH INTERMEDIATE FILTRATION |
BIS IS/ISO 105-E01 : 2010 | TEXTILES - TESTS FOR COLOUR FATNESS - PART E01: COLOUR FASTNESS TO WATER |
DIN EN ISO 10477:2005-01 | DENTISTRY - POLYMER BASED CROWN AND BRIDGE MATERIALS |
UNI EN ISO 5398-3 : 2008 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 3: QUANTIFICATION BY ATOMIC ABSORPTION SPECTROMETRY |
ISO 10136-1:1993 | Glass and glassware — Analysis of extract solutions — Part 1: Determination of silicon dioxide by molecular absorption spectrometry |
ISO 2812-5:2007 | Paints and varnishes Determination of resistance to liquids Part 5: Temperature-gradient oven method |
I.S. EN ISO 17231:2017 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF WATER REPELLENCY OF GARMENT LEATHER (ISO 17231:2017) |
ISO 6486-1:1999 | Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food Release of lead and cadmium Part 1: Test method |
UNE-EN ISO 1135-5:2016 | Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2015) |
I.S. EN ISO 22032:2009 | WATER QUALITY - DETERMINATION OF SELECTED POLYBROMINATED DIPHENYL ETHERS IN SEDIMENT AND SEWAGE SLUDGE - METHOD USING EXTRACTION AND GAS CHROMATOGRAPHY/MASS SPECTROMETRY |
ISO 5398-4:2007 | Leather Chemical determination of chromic oxide content Part 4: Quantification by inductively coupled plasma - optical emission spectrometer (ICP-OES) |
ISO 18070:2015 | Corrosion of metals and alloys Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel |
S.R. CEN/TS 16318:2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CHROMIUM(6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
BS 2000-462(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-462: PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 1: SEPARATION AND DETERMINATION OF SELECTED PCB CONGENERS BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD) |
ISO 22719:2008 | Water quality Determination of total alkalinity in sea water using high precision potentiometric titration |
NF EN ISO 17072-1 : 2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METAL |
EN ISO 9697:2017 | Water quality - Gross beta activity in non-saline water - Test method using thick source (ISO 9697:2015) |
ISO 21847-3:2007 | Nuclear fuel technology Alpha spectrometry Part 3: Determination of uranium 232 in uranium and its compounds |
ISO 13313:2017 | Iron ores Determination of sodium Flame atomic absorption spectrometric method |
ISO 15192:2010 | Soil quality Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
ISO/TR 11905-2:1997 | Water quality Determination of nitrogen Part 2: Determination of bound nitrogen, after combustion and oxidation to nitrogen dioxide, chemiluminescence detection |
EN 50642:2018 | Cable management systems - Test method for content of halogens |
BS ISO 13779-3:2008 | Implants for surgery. Hydroxyapatite Chemical analysis and characterization of crystallinity and phase purity |
ISO 14870:2001 | Soil quality — Extraction of trace elements by buffered DTPA solution |
UNI EN ISO 5398-4 : 2008 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 4: QUANTIFICATION BY INDUCTIVELY COUPLED PLASMA - OPTICAL EMISSION SPECTROMETER (ICP-OES) |
PREN 13256 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES |
ONORM EN ISO 23161 : 2011 | SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD (ISO 23161:2009) |
ISO 11133:2014 | Microbiology of food, animal feed and water — Preparation, production, storage and performance testing of culture media |
I.S. ENV 14194:2002 | FOODSTUFFS - DETERMINATION OF SAXITOXIN AND DE-SAXITOXIN IN MUSSELS - HPLC METHOD USING POST COLUMN DERIVATISATION |
ISO 19340:2017 | Water quality — Determination of dissolved perchlorate — Method using ion chromatography (IC) |
UNI EN ISO 5667-3 : 2013 | WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES |
ISO 10478:1994 | Petroleum products Determination of aluminium and silicon in fuel oils Inductively coupled plasma emission and atomic absorption spectroscopy methods |
UNI EN ISO 23913 : 2009 | WATER QUALITY - DETERMINATION OF CHROMIUM(VI) - METHOD USING FLOW ANALYSIS (FIA AND CFA) AND SPECTROMETRIC DETECTION |
ISO 13496:2000 | Meat and meat products Detection of colouring agents Method using thin-layer chromatography |
ISO 8124-3:2010 | Safety of toys Part 3: Migration of certain elements |
I.S. EN 71-3:2013 | SAFETY OF TOYS - PART 3: MIGRATION OF CERTAIN ELEMENTS |
NF EN ISO 14254 : 2011 | SOIL QUALITY - DETERMINATION OF EXCHANGEABLE ACIDITY IN BARIUM CHLORIDE EXTRACTS |
ISO 21340:2017 | Test methods for fibrous activated carbon |
PREN 14405 : DRAFT 2014 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
UNI CEN/TS 16677 : 2014 | OPHTHALMIC OPTICS - REFERENCE METHOD FOR THE TESTING OF SPECTACLE FRAMES AND SUNGLASSES FOR NICKEL RELEASE |
ISO 6250:1997 | Petroleum products Determination of the water reaction of aviation fuels |
UNI EN ISO 14403-2 : 2013 | WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE USING FLOW ANALYSIS (FIA AND CFA) - PART 2: METHOD USING CONTINUOUS FLOW ANALYSIS (CFA) |
I.S. EN 16174:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DIGESTION OF AQUA REGIA SOLUBLE FRACTIONS OF ELEMENTS |
I.S. EN 62321-7-2:2017 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 7-2: HEXAVALENT CHROMIUM - DETERMINATION OF HEXAVALENT CHROMIUM (CR(6)) IN POLYMERS AND ELECTRONICS BY THE COLORIMETRIC METHOD |
I.S. EN 15652:2009 | FOODSTUFFS - DETERMINATION OF NIACIN BY HPLC |
UNE-ISO 18321:2016 | Essential oils. Determination of peroxide value |
ISO 3012:1999 | Petroleum products Determination of thiol (mercaptan) sulfur in light and middle distillate fuels Potentiometric method |
DIN EN ISO 14254:2011-09 | SOIL QUALITY - DETERMINATION OF EXCHANGEABLE ACIDITY IN BARIUM CHLORIDE EXTRACTS |
BS EN ISO 20126 : 2012 | DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012) |
UNI EN 15492 : 2012 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULPHATE CONTENT - ION CHROMATOGRAPHIC METHOD |
BS EN 15947-4 : 2016 | PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS |
NF ISO 12830 : 2011 | PAPER, BOARD AND PULPS - DETERMINATION OF ACID-SOLUBLE MAGNESIUM, CALCIUM, MANGANESE, IRON, COPPER, SODIUM AND POTASSIUM |
I.S. EN ISO 16784-2:2008 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG |
UNE-EN ISO 5667-3:2013 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
BS EN 1568-2:2018 | Fire extinguishing media. Foam concentrates Specification for high expansion foam concentrates for surface application to water-immiscible liquids |
PREN 12595 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
BS EN 16993:2018 | Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
UNE-ISO 10390:2012 | Soil quality. Determination of pH. |
DIN EN ISO 4049:2010-03 | DENTISTRY - POLYMER-BASED RESTORATIVE MATERIALS |
IP 136 SECTION 1 : 1998 | PETROLEUM PRODUCTS - DETERMINATION OF SAPONIFICATION NUMBER - PART 1: COLOUR-INDICATOR TITRATION METHOD |
BS EN 16858:2017 | Foodstuffs. Determination of melamine and cyanuric acid in foodstuffs by liquid chromatography and tandem mass spectrometry (LC-MS/MS) |
PREN 12124 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM SULFITE |
PREN ISO 28723 : DRAFT 2010 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF THE EDGE COVERING ON ENAMELLED STEEL PLATE TO BE USED IN HEAT EXCHANGERS |
ISO 23161:2009 | Soil quality Determination of selected organotin compounds Gas-chromatographic method |
I.S. EN 16328:2012 | FERTILIZERS - DETERMINATION OF 3,4-DIMETHYL-1H-PYRAZOLE PHOSPHATE (DMPP) - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
BS ISO 10362-2:2013 | Cigarettes. Determination of water in smoke condensates Karl Fischer method |
UNI EN ISO 17072-1 : 2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
UNI EN ISO 28319 : 2010 | DENTISTRY - LASER WELDING |
NF EN ISO 23161 : 2011 | SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD |
I.S. EN ISO 10523:2012 | WATER QUALITY - DETERMINATION OF PH (ISO 10523:2008) |
ISO 17293-1:2014 | Surface active agents — Determination of chloroacetic acid (chloroacetate) in surfactants — Part 1: HPLC method |
UNI CEN/TS 15705 : 2009 | FERTILIZERS - DETERMINATION OF UREA CONDENSATES USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) - ISOBUTYLIDENEDIUREA AND CROTONYLIDENEDIUREA (METHOD A) AND METHYLEN-UREA OLIGOMERS (METHOD B) |
UNI CEN ISO/TS 21268-3 : 2010 | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 3: UP-FLOW PERCOLATION TEST |
UNI ISO 6588-1 : 2013 | PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 1: COLD EXTRACTION |
UNI EN ISO 28399 : 2011 | DENTISTRY - PRODUCTS FOR EXTERNAL TOOTH BLEACHING |
PREN 13362 : DRAFT 2012 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
BS 2000-91(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMEN EMULSIONS AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
NF ISO 4317 : 2012 | SURFACE-ACTIVE AGENTS AND DETERGENTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHODS |
UNE-EN 14405:2017 | Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) |
UNI EN 15476 : 2009 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO DEVARDA |
UNI EN ISO 28723 : 2011 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF THE EDGE COVERING ON ENAMELLED STEEL PLATE TO BE USED IN HEAT EXCHANGERS |
NFX 31 107 : 2003 | SOIL QUALITY - PARTICLE SIZE DETERMINATION BY SEDIMENTATION - PIPETTE METHOD |
ISO 16365-3:2014 | Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 3: Distinction between ether and ester polyurethanes by determination of the ester group content |
PREN 902 : DRAFT 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HYDROGEN PEROXIDE |
I.S. EN 2434-004:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 004: HIGH FLEXIBILITY |
ASTM D 7873 : 2013 : R2017 | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method) |
I.S. EN ISO 11125-4:1998 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES - PART 4: DETERMINATION OF APPARENT DENSITY |
I.S. CEN TS 14417:2006 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF WETTING-DRYING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
ISO 8858-3:2004 | Hard coal — Froth flotation testing — Part 3: Release evaluation |
DIN EN ISO 11133:2015-01 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA (ISO 11133:2014, CORRECTED VERSION 2014-11-01) |
EN ISO 4829-1:2018 | Steel and cast iron - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 1: Silicon contents between 0,05 % and 1,0 % (ISO 4829-1:2018) |
EN ISO 5398-3:2007 | Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry (ISO 5398-3:2007) |
NF EN ISO 28319 : 2010 | DENTISTRY - LASER WELDING |
NF EN ISO 4619 : 2011 | DRIERS FOR PAINTS AND VARNISHES |
EN ISO 21563:2013 | Dentistry - Hydrocolloid impression materials (ISO 21563:2013) |
EN ISO 5398-4:2007 | Leather - Chemical determination of chromic oxide content - Part 4: Quantification by inductively coupled plasma - optical emission spectrometer (ICP-OES) (ISO 5398-4:2007) |
DIN EN ISO 2812-3:2012-10 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
I.S. EN 15750:2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN FERTILIZERS CONTAINING NITROGEN ONLY AS NITRIC, AMMONIACAL AND UREA NITROGEN BY TWO DIFFERENT METHODS |
EN ISO 19340:2017 | Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017) |
UNI EN ISO 12870 : 2015 | OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS |
BS EN ISO 7886-4:2009 | Sterile hypodermic syringes for single use Syringes with re-use prevention feature |
EN ISO 28706-3:2018 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle (ISO 28706-3:2017) |
EN ISO 105-A01:2010 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
I.S. EN 13361:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
ISO 15633:2017 | Iron ores — Determination of nickel — Flame atomic absorption spectrometric method |
EN 16087-1:2011 | Soil improvers and growing media - Determination of the aerobic biological activity - Part 1: Oxygen uptake rate (OUR) |
ISO 22743:2006 | Water quality Determination of sulfates Method by continuous flow analysis (CFA) |
I.S. EN 14164:2014 | FOODSTUFFS - DETERMINATION OF VITAMIN B6 BY HIGH PERFORMANCE CHROMATOGRAPHY |
DIN EN ISO 10271:2011-10 | DENTISTRY - CORROSION TEST METHODS FOR METALLIC MATERIALS |
ISO 17698:2016 | Footwear Test methods for uppers Delamination resistance |
DIN EN ISO 3826-1:2013-09 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 1: CONVENTIONAL CONTAINERS (ISO 3826-1:2013) |
I.S. ISO 3856-3:1988 | PAINTS AND VARNISHES - DETERMINATION OF "SOLUBLE" METAL CONTENT - PART 3: DETERMINATION OF BARIUM CONTENT - FLAME ATOMIC EMISSION SPECTROMETRIC METHOD |
EN ISO 105-E01:2013 | Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013) |
I.S. EN 15491:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD |
I.S. EN 15692:2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
ISO 11997-1:2017 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid |
I.S. CEN/TS 15083-2:2005 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DETERMINATION OF THE NATURAL DURABILITY OF SOLID WOOD AGAINST WOOD-DESTROYING FUNGI, TEST METHODS - PART 2: SOFT ROTTING MICRO-FUNGI |
UNI EN ISO 3826-1 : 2013 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 1: CONVENTIONAL CONTAINERS |
ISO 3071:2005 | Textiles Determination of pH of aqueous extract |
I.S. EN ISO 15324:2008 | CORROSION OF METALS AND ALLOYS - EVALUATION OF STRESS CORROSION CRACKING BY THE DROP EVAPORATION TEST |
ISO 15202-2:2012 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 2: Sample preparation |
DIN EN 12672:2016-09 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POTASSIUM PERMANGANATE |
DIN EN 13075-2:2015-04 (Draft) | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
DIN EN 1278:2010-08 | Chemicals used for treatment of water intended for human consumption - Ozone |
DIN EN 1208:2005-06 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CALCIUM POLYPHOSPHATE |
DIN EN 12932:2015-05 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHEMICALS FOR EMERGENCY USE - SODIUM DICHLOROISOCYANURATE, DIHYDRATE |
DIN EN ISO 6885:2016-07 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ANISIDINE VALUE (ISO 6885:2016) |
DIN EN 12671:2016-09 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHLORINE DIOXIDE GENERATED IN SITU |
DIN EN ISO 14184-1:2011-12 | Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) (ISO 14184-1:2011) |
DIN EN 12915-1:2009-07 | PRODUCTS USED FOR THE TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - GRANULAR ACTIVATED CARBON - PART 1: VIRGIN GRANULAR ACTIVATED CARBON |
DIN EN 1205:2005-06 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - DISODIUM DIHYDROGEN PYROPHOSPHATE |
DIN EN ISO 1135-4:2016-06 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015) |
DIN EN ISO 6876:2012-10 | Dentistry - Root canal sealing materials (ISO 6876:2012) |
DIN EN ISO 17353:2005-11 | Water quality - Determination of selected organotin compounds - Gas chromatographic method (ISO 17353:2004) |
DIN EN 1408:2008-04 | Chemicals used for treatment of water intended for human consumption - Poly(diallyldimethylammonium chloride) |
DIN EN 1201:2005-06 | Chemicals used for treatment of water intended for human consumption - Potassium dihydrogen orthophosphate; German version EN 1201:2005 |
DIN EN 14350-2:2004-11 | CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 2: CHEMICAL REQUIREMENTS AND TESTS |
DIN EN 12848:2009-07 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
DIN EN ISO 17229:2016-06 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF WATER VAPOUR ABSORPTION (ISO 17229:2016) |
DIN EN 1409:2008-04 | Chemicals used for water treatment intended for human consumption - Polyamines |
DIN EN 1428:2012-03 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
DIN EN 12850:2009-07 | Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions |
DIN EN 12912:2013-01 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - BARITE |
DIN EN 12933:2015-05 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHEMICALS FOR EMERGENCY USE - TRICHLOROISOCYANURIC ACID |
DIN EN 13194:2015-05 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ACETIC ACID |
DIN EN ISO 4263-1:2005-03 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1: Procedure for mineral oils (ISO 4263-1:2003) |
DIN EN 13177:2010-08 | Chemicals used for treatment of water intended for human consumption - Methanol |
DIN EN 1407:2008-04 | Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides |
DIN EN ISO 17075:2008-02 | LEATHER - CHEMICAL TESTS - DETERMINATION OF CHROMIUM(6) CONTENT |
DIN EN 13176:2015-05 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ETHANOL |
DIN EN 1430:2009-07 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS |
DIN EN 48:2005-07 | Wood preservatives - Determination of eradicant action against larvae of Anobium punctatum (De Geer) (Laboratory method) |
DIN EN 14350-1:2004-11 | CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS |
DIN EN 1243:2011-07 | Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
DIN EN ISO 22674:2016-09 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
DIN EN 12847:2009-07 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
DIN EN 1405:2009-12 | Chemicals used for treatment of water intended for human consumption - Sodium alginate |
DIN EN 1429:2013-08 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
DIN EN 1212:2005-06 | Chemicals used for treatment of water intended for human consumption - Sodium polyphosphate; German version EN 1212:2005 |
DIN EN 725-1:2008-06 | Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina |
DIN EN ISO 3823-2:2008-11 | Dentistry - Rotary bur instruments - Part 2: Finishing burs (ISO 3823-2:2003+Amd 1:2008) (includes Amendment A1:2008) |
DIN EN 1207:2005-06 | Chemicals used for treatment of water intended for human consumption - Tetrapotassium pyrophosphate; German version EN 1207:2005 |
EN ISO 439:2010 | Steel and iron - Determination of total silicon content - Gravimetric method (ISO 439:1994) |
DIN EN ISO 105-B02:2014-11 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST (ISO 105-B02:2014) |
DIN EN 14526:2015-05 (Draft) | FOODSTUFFS - DETERMINATION OF SAXITOXIN-GROUP TOXINS IN SHELLFISH - HPLC METHOD USING PRE-COLUMN DERIVATIZATION WITH PEROXIDE OR PERIODATE OXIDATION |
UNE-EN 15510:2018 | Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum and lead by ICP-AES |
DIN EN ISO 16588:2004-02 | Water quality - Determination of six complexing agents - Gas-chromatographic method (ISO 16588:2002) |
DIN EN ISO 7711-1:2009-10 | Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997 + Amd 1:2009); German version EN ISO 7711-1:1998 + A1:2009 |
DIN EN ISO 20843:2011-04 | Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011) |
DIN EN 12126:2013-02 | Chemicals used for treatment of water intended for human consumption - Liquefied ammonia |
DIN EN 12125:2013-02 | Chemicals used for treatment of water intended for human consumption - Sodium thiosulfate |
DIN EN 12124:2013-02 | Chemicals used for treatment of water intended for human consumption - Sodium sulfite |
DIN EN 118:2014-03 | WOOD PRESERVATIVES - DETERMINATION OF PREVENTIVE ACTION AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
DIN EN 973:2009-12 | Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers |
DIN EN 899:2009-07 | Chemicals used for treatment of water intended for human consumption - Sulfuric acid |
DIN EN 937:2016-09 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHLORINE |
DIN EN 14368:2015-06 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MANGANESE DIOXIDE COATED LIMESTONE |
DIN EN 14668:2005-09 | SURFACE ACTIVE AGENTS - DETERMINATION OF QUATERNARY AMMONIUM SURFACE ACTIVE AGENTS IN RAW MATERIALS AND FORMULATED PRODUCTS - POTENTIOMETRIC TWO-PHASE TITRATION METHOD |
DIN EN 12120:2013-02 | Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite |
DIN EN 14480:2004-11 | Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method |
DIN EN ISO 483:2006-02 | Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005) |
DIN EN 15360:2007-08 | Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC) |
EN 13138-3:2014 | Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn |
DIN EN 12173:2013-01 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM FLUORIDE |
UNE-EN 12485:2010 | Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide and calcium magnesium carbonate - Test methods |
UNE-EN 14152:2015 | Foodstuffs - Determination of vitamin B2 by high performance liquid chromatography |
UNE-EN 13253:2017 | Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) |
BS EN ISO 7864:2016 | Sterile hypodermic needles for single use. Requirements and test methods |
BS EN ISO 8871-1:2004 | Elastomeric parts for parenterals and for devices for pharmaceutical use Extractables in aqueous autoclavates |
BS EN 899:2009 | Chemicals used for treatment of water intended for human consumption. Sulfuric acid |
BS EN 1198:2005 | Chemicals used for treatment of water intended for human consumption. Sodium dihydrogen orthophosphate |
BS EN 1884:1999 | Feather and down. Test methods. Determination of microbiological state |
BS EN ISO 11127-3:2011 | Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives Determination of apparent density |
UNE-EN 897:2013 | Chemicals used for treatment of water intended for human consumption - Sodium carbonate |
UNE-EN ISO 3107:2011 | Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements (ISO/FDIS 3107:2010) |
BS EN ISO 6865 : 2001 | METHODS FOR ANALYSIS OF ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FIBRE CONTENT - METHOD WITH INTERMEDIATE FILTRATION |
BS EN 12822:2014 | Foodstuffs. Determination of vitamin E by high performance liquid chromatography. Measurement of α-, β-, γ- and δ-tocopherol |
BS EN 14863:2005 | Vitreous and porcelain enamels. Determination of the edge covering of enamelled steel plate to be used in heat exchangers |
BS EN 12485:2017 | Chemicals used for treatment of water intended for human consumption. Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime. Test methods |
ISO 14184-2:2011 | Textiles Determination of formaldehyde Part 2: Released formaldehyde (vapour absorption method) |
BS EN 13177:2010 | Chemicals used for treatment of water intended for human consumption. Methanol |
BS EN 12594:2014 | Bitumen and bituminous binders. Preparation of test samples |
ISO 7886-2:1996 | Sterile hypodermic syringes for single use Part 2: Syringes for use with power-driven syringe pumps |
BS EN 12630:1999 | Fruit and vegetable juices. Determination of glucose, fructose, sorbitol and sucrose contents. Method using high-performance liquid chromatography |
BS EN ISO 4630-1:2004 | Clear liquids. Estimation of colour by the Gardner colour scale Visual method |
BS EN ISO 7886-3:2009 | Sterile hypodermic syringes for single use Auto-disable syringes for fixed-dose immunization |
BS EN 1407:2008 | Chemicals used for treatment of water intended for human consumption. Anionic and non-ionic polyacrylamides |
ISO 12228-1:2014 | Determination of individual and total sterols contents Gas chromatographic method Part 1: Animal and vegetable fats and oils |
ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
ISO 105-Z03:1996 | Textiles — Tests for colour fastness — Part Z03: Intercompatibility of basic dyes for acrylic fibres |
ISO 13402:1995 | Surgical and dental hand instruments — Determination of resistance against autoclaving, corrosion and thermal exposure |
BS EN ISO 13294:1997 | Dental handpieces. Dental air-motors |
BS EN ISO 10993-15:2009 | Biological evaluation of medical devices Identification and quantification of degradation products from metals and alloys |
BS EN ISO 3262-21:2000 | Extenders for paints. Specifications and methods of test Silica sand (unground natural quartz) |
ISO 10700:1994 | Steel and iron — Determination of manganese content — Flame atomic absorption spectrometric method |
ISO 22032:2006 | Water quality — Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge — Method using extraction and gas chromatography/mass spectrometry |
BS EN 12848:2009 | Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions |
UNE-EN ISO 11127-3:2012 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2011) |
BS EN 1212:2005 | Chemicals used for treatment of water intended for human consumption. Sodium polyphosphate |
UNE-EN ISO 4404-1:2012 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012) |
ISO 4263-2:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 2: Procedure for category HFC hydraulic fluids |
BS EN ISO 105-C08:2010 | Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator |
BS EN 1207:2005 | Chemicals used for treatment of water intended for human consumption. Tetrapotassium pyrophosphate |
UNE-EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
ISO 14896:2009 | Plastics — Polyurethane raw materials — Determination of isocyanate content |
ISO 15711:2003 | Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water |
ISO 15705:2002 | Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method |
BS EN ISO 6867:2001 | Animal feeding stuffs. Determination of vitamin E content. Method using high-performance liquid chromatography |
BS EN 12457-4:2002 | Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
UNE-EN ISO 8536-4:2013 | Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010) |
UNE-EN 15863:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
ISO 6865:2000 | Animal feeding stuffs — Determination of crude fibre content — Method with intermediate filtration |
ISO 9831:1998 | Animal feeding stuffs, animal products, and faeces or urine — Determination of gross calorific value — Bomb calorimeter method |
IEC 60754-2:2011 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
BS EN 15550:2017 | Animal feeding stuffs: Methods of sampling and analysis. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion |
ISO 4404-1:2012 | Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids |
ISO 7491:2000 | Dental materials — Determination of colour stability |
BS EN ISO 7887:2011 | Water quality. Examination and determination of colour |
BS EN ISO 3262-6:1998 | Extenders for paints. Specifications and methods of test Precipitated calcium carbonate |
BS EN ISO 15181-2:2007 | Paints and varnishes. Determination of release rate of biocides from antifouling paints Determination of copper-ion concentration in the extract and calculation of the release rate |
BS EN 13196:2000 | Fruit and vegetable juices. Determination of total sulfur dioxide by distillation |
ISO 14402:1999 | Water quality Determination of phenol index by flow analysis (FIA and CFA) |
BS EN ISO 15912:2016 | Dentistry. Refractory investment and die material |
ISO 17075-1:2017 | Leather — Chemical determination of chromium(VI) content in leather — Part 1: Colorimetric method |
ISO 11143:2008 | Dentistry Amalgam separators |
UNE-EN 1278:2010 | Chemicals used for treatment of water intended for human consumption - Ozone |
BS EN 12490:2010 | Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood |
BS EN ISO 105-B02:2014 | Textiles. Tests for colour fastness Colour fastness to artificial light: Xenon arc fading lamp test |
BS EN 13138-1:2008 | Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be worn |
BS EN 12582:1999 | Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD |
UNE-EN 16086-1:2012 | Soil improvers and growing media - Determination of plant response - Part 1: Pot growth test with Chinese cabbage |
BS EN 1202:2005 | Chemicals used for treatment of water intended for human consumption. Dipotassium hydrogen orthophosphate |
BS EN 12766-3:2004 | Petroleum products and used oils. Determination of PCBs and related products Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD) |
BS EN 12671:2009 | Chemicals used for treatment of water intended for human consumption. Chlorine dioxide generated in situ |
BS EN 890:2012 | Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate solution |
ISO 21078-1:2008 | Determination of boron (III) oxide in refractory products Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes |
ISO 21627-2:2009 | Plastics Epoxy resins Determination of chlorine content Part 2: Easily saponifiable chlorine |
ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
UNE-EN ISO 13934-2:2014 | Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014) |
UNE-EN ISO 105-E01:2013 | Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013) |
ISO 12782-2:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite |
ISO 13900:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method after distillation |
BS EN ISO 6251:1998 | Liquid petroleum gases. Corrosiveness to copper. Copper strip test |
BS EN 1899-1:1998 | Water quality. Determination of biochemical oxygen demand after n days (BODn) Dilution and seeding method with allylthiourea addition |
DIN EN ISO 7886-3:2010-01 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION |
BS EN 13890:2009 | Workplace exposure. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods |
ISO 8655-5:2002 | Piston-operated volumetric apparatus Part 5: Dispensers |
BS EN ISO 12687:1998 | Metallic coatings. Porosity tests. Humid sulfur (flowers of sulfur) test |
BS EN ISO 105-A01:2010 | Textiles. Tests for colour fastness General principles of testing |
BS EN ISO 3262-15:2000 | Extenders for paints. Specifications and methods of test Vitreous silica |
BS EN 14148:2003 | Foodstuffs. Determination of vitamin K1 by HPLC |
UNE-EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
BS EN 12386:2012 | Chemicals used for treatment of water intended for human consumption. Copper sulfate |
BS EN 15086:2006 | Foodstuffs. Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs |
UNE-EN ISO 11641:2013 | Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012) |
ISO 9963-2:1994 | Water quality Determination of alkalinity Part 2: Determination of carbonate alkalinity |
BS EN 13784:2002 | Foodstuffs. DNA comet assay for the detection of irradiatied foodstuffs. Screening method |
ISO 18857-2:2009 | Water quality Determination of selected alkylphenols Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation |
EN 60754-2:2014 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
BS EN 1890:2006 | Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide |
BS EN ISO 11997-2:2013 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity/UV light |
BS EN 13518:2002 | Footwear. Test methods for uppers. Water resistance |
BS EN ISO 15181-3:2007 | Paints and varnishes. Determination of release rate of biocides from antifouling paints Calculation of the zinc ethylene-bis (dithiocarbamate)(zineb) release rate by determination of the concentration of ethylenethiourea in the extract |
EN ISO 13161:2015 | Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011) |
EN ISO 2812-2:2007 | Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2007) |
EN 14104:2003 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of acid value |
I.S. EN 13138-1:2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
I.S. EN 12902:2005 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - INORGANIC SUPPORTING AND FILTERING MATERIALS - METHODS OF TEST |
I.S. EN ISO 2811-4:2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 4: PRESSURE CUP METHOD |
ONORM EN ISO 10271 : 2011 | DENTISTRY - CORROSION TEST METHODS FOR METALLIC MATERIALS (ISO 10271:2011) |
I.S. EN ISO 9694:1999 | DENTAL PHOSPHATE-BONDED CASTING INVESTMENTS |
I.S. EN 938:2016 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORITE |
I.S. EN ISO 8502-12:2005 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 12: FIELD METHOD FOR THE TITRIMETRIC DETERMINATION OF WATER-SOLUBLE FERROUS IONS |
I.S. EN 1203:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - TRIPOTASSIUM ORTHOPHOSPHATE |
I.S. EN 1204:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM TETRAHYDROGEN BIS(ORTHOPHOSPHATE) |
I.S. EN 13368-1:2014 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS IN FERTILIZERS BY CHROMATOGRAPHY - PART 1: DETERMINATION OF EDTA, HEEDTA AND DTPA BY ION CHROMATOGRAPHY |
I.S. EN ISO 11909:2007 | BINDERS FOR PAINTS AND VARNISHES - POLYISOCYANATE RESINS - GENERAL METHODS OF TEST |
DIN 51079-2:2004-08 | TESTING OF CERAMIC MATERIALS - CHEMICAL ANALYSIS OF SILICON CARBIDE USED AS RAW MATERIAL AND AS CONSTITUENT IN MATERIALS - PART 2: PRESSURE DIGESTION WITH ACID |
I.S. EN ISO 21627-1:2009 | PLASTICS - EPOXY RESINS - DETERMINATION OF CHLORINE CONTENT - PART 1: INORGANIC CHLORINE |
EN ISO 27587:2009 | Leather - Chemical tests - Determination of the free formaldehyde in process auxiliaries (ISO 27587:2009) |
EN ISO 25619-1:2008 | Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2008) |
I.S. EN 12821:2009 | FOODSTUFFS - DETERMINATION OF VITAMIN D BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MEASUREMENT OF CHOLECALCIFEROL (D[3]) OR ERGOCALCIFEROL (D[2]) |
I.S. EN 13075-2:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
I.S. EN 13138-2:2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
I.S. EN ISO 105-C08:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW-TEMPERATURE BLEACH ACTIVATOR |
I.S. EN ISO 15141-1:1999 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CEREALS AND CEREAL PRODUCTS - PART 1: HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH SILICA GEL CLEAN UP |
I.S. EN 12932:2015 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHEMICALS FOR EMERGENCY USE - SODIUM DICHLOROISOCYANURATE, DIHYDRATE |
I.S. EN 899:2009 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SULPHURIC ACID |
I.S. EN 12848:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
DIN 51079-1:2004-08 | TESTING OF CERAMIC MATERIALS - CHEMICAL ANALYSIS OF SILICON CARBIDE USED AS RAW MATERIAL AND AS CONSTITUENT IN MATERIALS - PART 1: DIGESTION WITH SODIUM CARBONATE AND BORIC ACID |
I.S. EN ISO 15181-1:2007 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 1: GENERAL METHOD FOR EXTRACTION OF BIOCIDES |
I.S. EN 1427:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
I.S. EN ISO 5164:2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
I.S. EN ISO 3380:2015 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF SHRINKAGE TEMPERATURE UP TO 100 DEGREE C (ISO 3380:2015) |
UNI EN ISO 7886-3 : 2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION |
I.S. EN 14652:2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
I.S. EN 1198:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM DIHYDROGEN ORTHOPHOSPHATE |
DIN EN ISO 2811-4:2011-06 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
I.S. EN ISO 21627-3:2009 | PLASTICS - EPOXY RESINS - DETERMINATION OF CHLORINE CONTENT - PART 3: TOTAL CHLORINE |
I.S. EN 1014-3:2010 | WOOD PRESERVATIVES - CREOSOTE AND CREOSOTED TIMBER - METHODS OF SAMPLING AND ANALYSIS - PART 3: DETERMINATION OF THE BENZO(A)PYRENE CONTENT OF CREOSOTE |
I.S. EN 12126:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - LIQUEFIED AMMONIA |
I.S. EN 725-1:2007 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 1: DETERMINATION OF IMPURITIES IN ALUMINA |
I.S. EN 1409:2008 | CHEMICALS USED FOR WATER TREATMENT INTENDED FOR HUMAN CONSUMPTION - POLYAMINES |
I.S. EN ISO 9936:2016 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TOCOPHEROL AND TOCOTRIENOL CONTENTS BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 9936:2016) |
I.S. EN 49-1:2016 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST ANOBIUM PUNCTATUM (DE GEER) BY EGG-LAYING AND LARVAL SURVIVAL - PART 1: APPLICATION BY SURFACE TREATMENT (LABORATORY METHOD) |
I.S. EN 896:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROXIDE |
DIN EN 12822:2000-07 | FOODSTUFFS - DETERMINATION OF VITAMIN E BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MEASUREMENT OF ALFA-, BETA-, GAMMA- AND DELTA-TOCOPHEROLS |
CEN/TS 15083-1:2005 | Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 1: Basidiomycetes |
I.S. EN ISO 15912:2016 | DENTISTRY - REFRACTORY INVESTMENT AND DIE MATERIAL (ISO 15912:2016) |
DIN EN 1240:2011-07 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
I.S. EN ISO 8192:2007 | WATER QUALITY - TEST FOR INHIBITION OF OXYGEN CONSUMPTION BY ACTIVATED SLUDGE FOR CARBONACEOUS AND AMMONIUM OXIDATION |
I.S. EN ISO 2811-1:2016 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 1: PYCNOMETER METHOD (ISO 2811-1:2016) |
I.S. EN ISO 105-C06:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING |
I.S. EN 12121:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM DISULFITE |
I.S. EN ISO 3093:2009 | WHEAT, RYE AND THEIR FLOURS, DURUM WHEAT AND DURUM WHEAT SEMOLINA - DETERMINATION OF THE FALLING NUMBER ACCORDING TO HAGBERG-PERTEN |
I.S. EN ISO 1135-4:2015 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015) |
I.S. EN 897:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CARBONATE |
I.S. EN 1205:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - DISODIUM DIHYDROGEN PYROPHOSPHATE |
S.R. CEN/TS 15863:2012 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERISATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED TEST CONDITIONS |
I.S. EN 12122:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIA SOLUTION |
I.S. EN 1421:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM CHLORIDE |
I.S. EN 13176:2015 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ETHANOL |
I.S. EN 1428:2012 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
I.S. EN 13038:2011 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
I.S. EN ISO 4404-1:2012 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
DIN EN ISO 11127-7:2012-04 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides (ISO 11127-7:2011) |
I.S. EN 13251:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES |
I.S. EN 12671:2016 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHLORINE DIOXIDE GENERATED IN SITU |
DIN EN ISO 7218:2014-09 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS (ISO 7218:2007 + AMD 1:2013, CORRECTED VERSION 2014-04-15) |
I.S. EN ISO 5764:2009 | MILK - DETERMINATION OF FREEZING POINT - THERMISTOR CRYOSCOPE METHOD (REFERENCE METHOD) |
DIN EN 12485:2017-10 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS |
DIN EN 12206-1:2004-09 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
I.S. EN ISO 11127-3:2011 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 3: DETERMINATION OF APPARENT DENSITY (ISO 11127-3:2011) |
EN 14112:2016 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
I.S. EN 13249:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION) |
I.S. EN ISO 20843:2011 | CATEGORIESAND RELATED PRODUCTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CATEGORIES HFAE, HFAS AND HFC |
I.S. EN ISO 11143:2008 | DENTISTRY - AMALGAM SEPARATORS |
I.S. EN ISO 17294-2:2016 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 2: DETERMINATION OF SELECTED ELEMENTS INCLUDING URANIUM ISOTOPES (ISO 17294-2:2016) |
I.S. EN ISO 8502-8:2005 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 8: FIELD METHOD FOR THE REFRACTOMETRIC DETERMINATION OF MOISTURE |
DIN ISO 6744-2:2002-11 | BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART 2: DETERMINATION OF PHTHALIC ANHYDRIDE CONTENT |
DIN EN ISO 11127-6:2012-04 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011) |
I.S. EN ISO 17070:2015 | LEATHER - CHEMICAL TESTS - DETERMINATION OF TETRACHLOROPHENOL-,TRICHLOROPHENOL-, DICHLOROPHENOL-, MONOCHLOROPHENOL-ISOMERS AND PENTACHLOROPHENOL CONTENT (ISO 17070:2015) |
I.S. EN 12596:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY BY VACUUM CAPILLARY |
I.S. EN ISO 15141-2:1999 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CEREALS AND CEREAL PRODUCTS - PART 2: HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH BICARBONATE CLEAN UP |
I.S. EN ISO 14896:2009 | PLASTICS - POLYURETHANE RAW MATERIALS - DETERMINATION OF ISOCYANATE CONTENT |
I.S. EN 12120:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN SULFITE |
I.S. EN ISO 9626:2016 | STAINLESS STEEL NEEDLE TUBING FOR THE MANUFACTURE OF MEDICAL DEVICES - REQUIREMENTS AND TEST METHODS |
I.S. EN 13523-8:2017 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
ONORM EN ISO 660 : 2009 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ACID VALUE AND ACIDITY |
I.S. EN ISO 10504:2015 | STARCH DERIVATIVES - DETERMINATION OF THE COMPOSITION OF GLUCOSE SYRUPS, FRUCTOSE SYRUPS AND HYDROGENATED GLUCOSE SYRUPS - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 10504:2013) |
I.S. EN 13890:2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
DIN EN ISO 11376:2002-04 | PLASTICS - EPOXY RESINS AND GLYCIDYL ESTERS - DETERMINATION OF INORGANIC CHLORINE |
I.S. EN 47:2016 | WOOD PRESERVATIVES - DETERMINATION OF THE TOXIC VALUES AGAINST LARVAE OF HYLOTRUPES BAJULUS (LINNAEUS) - (LABORATORY METHOD) |
I.S. EN ISO 105-E02:2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER (ISO 105-E02:2013) |
I.S. EN 118:2013 | WOOD PRESERVATIVES - DETERMINATION OF PREVENTIVE ACTION AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
I.S. EN 1408:2008 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POLY (DIALLYLDIMETHYLAMMONIUM CHLORIDE) |
I.S. EN 13256:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS -CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES |
I.S. EN 1197:2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MONOZINC PHOSPHATE SOLUTION |
I.S. EN 12485:2017 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS |
I.S. EN 117:2012 | WOOD PRESERVATIVES - DETERMINATION OF TOXIC VALUES AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
I.S. EN 12386:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE |
I.S. EN 1240:2011 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
DIN EN ISO 16744:2004-05 | DENTISTRY - BASE METAL MATERIALS FOR FIXED DENTAL RESTORATIONS |
I.S. EN 13037:2011 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PH |
I.S. EN 15550:2017 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
I.S. EN ISO 6873:2013 | DENTISTRY - GYPSUM PRODUCTS (ISO 6873:2013) |
I.S. EN 12125:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM THIOSULFATE |
I.S. EN 1201:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POTASSIUM DIHYDROGEN ORTHOPHOSPHATE |
I.S. EN 1019:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SULPHUR DIOXIDE |
I.S. EN 1210:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM TRIPOLYPHOSPHATE |
DIN EN ISO 11402:2005-09 | PHENOLIC, AMINO AND CONDENSATION RESINS - DETERMINATION OF FREE-FORMALDEHYDE CONTENT |
I.S. EN 46-2:2016 | WOOD PRESERVATIVES - DETERMINATION OF THE PREVENTIVE ACTION AGAINST RECENTLY HATCHED LARVAE OF HYLOTRUPES BAJULUS (LINNAEUS) - PART 2: OVICIDAL EFFECT (LABORATORY METHOD) |
I.S. EN 13752:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MANGANESE DIOXIDE |
OVE/ONORM EN 60754-2 : 2015 | TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 2: DETERMINATION OF ACIDITY (BY PH MEASUREMENT) AND CONDUCTIVITY (IEC 60754-2:2011) |
I.S. EN ISO 11244:2000 | DENTAL BRAZING INVESTMENTS |
DIN 10476:2001-11 | DETERMINATION OF NITRITE AND NITRATE CONTENT OF MILK PRODUCTS - ENZYMATIC METHOD (COLOR TEST) |
I.S. EN 12176:1998 | CHARACTERIZATION OF SLUDGE - DETERMINATION OF PH-VALUE |
I.S. EN ISO 11998:2006 | PAINTS AND VARNISHES - DETERMINATION OF WET-SCRUB RESISTANCE AND CLEANABILITY OF COATINGS |
I.S. EN 13518:2002 | FOOTWEAR - TEST METHODS FOR UPPERS - WATER RESISTANCE |
I.S. EN ISO 6876:2012 | DENTISTRY - ROOT CANAL SEALING MATERIALS (ISO 6876:2012) |
I.S. EN ISO 105-E01:2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER (ISO 105-E01:2013) |
I.S. EN ISO 2811-3:2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 3: OSCILLATION METHOD |
DIN ISO 6744-3:2002-11 | BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART 3: DETERMINATION OF UNSAPONIFIABLE MATTER CONTENT |
I.S. EN ISO 11245:2000 | DENTAL RESTORATIONS - PHOSPHATE-BONDED REFRACTORY DIE MATERIALS |
DIN 10373:2003-01 | ANALYSIS OF TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF NICOTINE CONTENT - GASCHROMATOGRAPHIC METHOD |
DIN EN 1897:2002-02 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE COMPRESSIVE CREEP PROPERTIES |
DIN EN 1890:2006-09 | Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide |
DIN ISO 6744-4:2002-11 | BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART 4: DETERMINATION OF FATTY ACID CONTENT |
I.S. EN ISO 8537:2016 | STERILE SINGLE-USE SYRINGES, WITH OR WITHOUT NEEDLE, FOR INSULIN (ISO 8537:2016) |
DIN EN 1483:1997-08 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY |
I.S. EN 1430:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS |
I.S. EN 12678:2016 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POTASSIUM PEROXOMONOSULFATE |
I.S. EN 13252:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS |
I.S. EN 13265:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS |
DIN ISO 17380:2006-05 | SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE AND EASILY RELEASED CYANIDE - CONTINUOUS-FLOW ANALYSIS METHOD |
DIN ISO 16772:2005-06 | Soil quality - Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry (ISO 16772:2004) |
S.R. CEN/TS 16201:2013 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF VIABLE PLANT SEEDS AND PROPAGULES |
I.S. EN ISO 11641:2012 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO PERSPIRATION (ISO 11641:2012) |
I.S. EN ISO 15181-2:2007 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 2: DETERMINATION OF COPPER-ION CONCENTRATION IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
I.S. EN 12911:2013 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MANGANESE GREENSAND |
I.S. EN 49-2:2015 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST ANOBIUM PUNCTATUM (DE GEER) BY EGG-LAYING AND LARVAL SURVIVAL - PART 2: APPLICATION BY IMPREGNATION (LABORATORY METHOD) |
I.S. EN ISO 11997-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
I.S. EN 13255:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
I.S. EN 12931:2015 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHEMICALS FOR EMERGENCY USE - SODIUM DICHLOROISOCYANURATE, ANHYDROUS |
I.S. EN ISO 11127-7:2011 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 7: DETERMINATION OF WATER-SOLUBLE CHLORIDES (ISO 11127-7:2011) |
I.S. EN 937:2016 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHLORINE |
I.S. EN 898:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN CARBONATE |
I.S. EN ISO 105-A01:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING |
I.S. EN 13250:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS |
I.S. EN 14133:2009 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN WINE AND BEER - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEAN-UP |
I.S. EN ISO 15320:2011 | PULP, PAPER AND BOARD - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT |
I.S. EN 12822:2014 | FOODSTUFFS - DETERMINATION OF VITAMIN E BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MEASUREMENT OF ALPHA-, BETA-, GAMMA- AND DELTA-TOCOPHEROLS |
I.S. EN ISO 15774:2017 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CADMIUM CONTENT BY DIRECT GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (ISO 15774:2017) |
I.S. EN ISO 11609:2017 | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017) |
I.S. EN ISO 10319:2015 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST (ISO 10319:2015) |
I.S. EN ISO 9308-1:2014 | WATER QUALITY - ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL BACKGROUND FLORA (ISO 9308-1:2014) |
I.S. EN 1278:2010 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - OZONE |
DIN EN 1014-4:2010-11 | Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote |
I.S. EN ISO 10304-1:2009 | WATER QUALITY - DETERMINATION OF DISSOLVED ANIONS BY LIQUID CHROMATOGRAPHY OF IONS - PART 1: DETERMINATION OF BROMIDE, CHLORIDE, FLUORIDE, NITRATE, NITRITE, PHOSPHATE AND SULFATE |
I.S. EN ISO 105-E09:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING |
I.S. EN ISO 9917-1:2007 | DENTISTRY - WATER-BASED CEMENTS - PART 1: POWDER/LIQUID ACID-BASE CEMENTS |
I.S. EN 14898:2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ACTIVE MEDIA FILTERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
I.S. EN ISO 20783-1:2011 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF EMULSION STABILITY OF FIRE-RESISTANT FLUIDS - PART 1: FLUIDS IN CATEGORY HFAE |
I.S. EN ISO 105-E12:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING |
I.S. EN 48:2005 | WOOD PRESERVATIVES - DETERMINATION OF THE ERADICANT ACTION AGAINST LARVAE OF ANOBIUM PUNCTATUM (DE GEER) (LABORATORY METHOD) |
I.S. EN ISO 7490:2001 | DENTAL GYPSUM-BONDED CASTING INVESTMENTS |
I.S. EN ISO 16408:2015 | DENTISTRY - ORAL CARE PRODUCTS - ORAL RINSES (ISO 16408:2015) |
I.S. EN 13138-3:2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
I.S. EN ISO 10139-2:2016 | DENTISTRY - SOFT LINING MATERIALS FOR REMOVABLE DENTURES - PART 2: MATERIALS FOR LONG-TERM USE (ISO 10139-2:2016) |
I.S. EN 13614:2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
I.S. EN ISO 2871-2:2010 | SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF CATIONIC-ACTIVE MATTER CONTENT - PART 2: CATIONIC-ACTIVE MATTER OF LOW MOLECULAR MASS (BETWEEN 200 AND 500) |
I.S. EN ISO 17229:2016 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF WATER VAPOUR ABSORPTION (ISO 17229:2016) |
I.S. EN 12926:2015 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM PEROXODISULFATE |
I.S. EN 12823-1:2014 | FOODSTUFFS - DETERMINATION OF VITAMIN A BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - PART 1: MEASUREMENT OF ALL-E-RETINOL AND 13-Z-RETINOL |
I.S. EN 14176:2017 | FOODSTUFFS - DETERMINATION OF DOMOIC ACID IN RAW SHELLFISH, RAW FINFISH AND COOKED MUSSELS BY RP-HPLC USING UV DETECTION |
I.S. EN 13257:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS |
I.S. EN 14984:2016 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
I.S. EN ISO 7218:2007 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS (ISO 7218:2007) |
I.S. EN ISO 11642:2012 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER (ISO 11642:2012) |
I.S. EN 14526:2017 | FOODSTUFFS - DETERMINATION OF SAXITOXIN-GROUP TOXINS IN SHELLFISH - HPLC METHOD USING PRE-COLUMN DERIVATIZATION WITH PEROXIDE OR PERIODATE OXIDATION |
I.S. EN ISO 21627-2:2009 | PLASTICS - EPOXY RESINS - DETERMINATION OF CHLORINE CONTENT - PART 2: EASILY SAPONIFIABLE CHLORINE |
I.S. EN ISO 6885:2016 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ANISIDINE VALUE (ISO 6885:2016) |
I.S. EN 12912:2012 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - BARITE |
I.S. EN 12175:2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HEXAFLUOROSILICIC ACID |
I.S. EN 113:1997 | WOOD PRESERVATIVES - TEST METHOD FOR DETERMINING THE PROTECTIVE EFFECTIVENESS AGAINST WOOD DESTROYING BASIDIOMYCETES - DETERMINATION OF THE TOXIC VALUES |
I.S. EN 12124:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM SULFITE |
I.S. EN 12847:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS |
I.S. EN 13253:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS) |
I.S. EN 1208:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CALCIUM POLYPHOSPHATE |
I.S. EN 1405:2009 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM ALGINATE |
I.S. EN 14122:2014 | FOODSTUFFS - DETERMINATION OF VITAMIN B1 BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
I.S. EN ISO 13934-2:2014 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014) |
I.S. EN 12174:2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE |
I.S. EN 12915-1:2009 | PRODUCTS USED FOR THE TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - GRANULAR ACTIVATED CARBON - PART 1: VIRGIN GRANULAR ACTIVATED CARBON |
I.S. EN ISO 9227:2017 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:2017) |
I.S. EN 1199:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - DISODIUM HYDROGEN ORTHOPHOSPHATE |
I.S. EN 1212:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM POLYPHOSPHATE |
I.S. EN ISO 11644:2009 | LEATHER - TEST FOR ADHESION OF FINISH |
I.S. EN 13194:2015 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ACETIC ACID |
DIN EN ISO 10720:2007-06 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997) |
I.S. EN 973:2009 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORIDE FOR REGENERATION OF ION EXCHANGERS |
I.S. EN ISO 14184-1:2011 | TEXTILES - DETERMINATION OF FORMALDEHYDE - PART 1: FREE AND HYDROLYSED FORMALDEHYDE (WATER EXTRACTION METHOD) |
I.S. EN 1407:2008 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANIONIC AND NON-IONIC POLYACRYLAMIDES |
I.S. EN ISO 11885:2009 | WATER QUALITY - DETERMINATION OF SELECTED ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
DIN EN ISO 11127-3:2012-04 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2011); German version EN ISO 11127-3:2011 |
DIN EN ISO 7887:2012-04 | Water quality - Examination and determination of colour (ISO 7887:2011) |
I.S. EN ISO 105-E04:2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION (ISO 105-E04:2013) |
I.S. EN ISO 4263-3:2015 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING EHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS (ISO 4263-3:2015) |
I.S. EN 12490:2010 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - PRESERVATIVE-TREATED SOLID WOOD - DETERMINATION OF THE PENETRATION AND RETENTION OF CREOSOTE IN TREATED WOOD |
DIN 19684-7:1998-11 | METHODS OF SOIL INVESTIGATIONS FOR AGRICULTURAL ENGINEERING - CHEMICAL LABORATORY TESTS - PART 7: DETERMINATION OF READILY SOLUBLE BIVALENT IRON |
I.S. EN 12594:2014 | BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
I.S. EN 12173:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM FLUORIDE |
I.S. EN 1014-4:2010 | WOOD PRESERVATIVES - CREOSOTE AND CREOSOTED TIMBER - METHODS OF SAMPLING AND ANALYSIS - PART 4: DETERMINATION OF THE WATEREXTRACTABLE PHENOLS CONTENT OF CREOSOTE |
DIN EN ISO 28158:2010-12 | DENTISTRY - INTEGRATED DENTAL FLOSS AND HANDLES |
I.S. EN ISO 105-B02:2014 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST (ISO 105-B02:2014) |
I.S. EN 12672:2016 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POTASSIUM PERMANGANATE |
I.S. EN 14112:2016 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
I.S. EN 1211:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POTASSIUM TRIPOLYPHOSPHATE |
ONORM EN ISO 17730 : 2015 | DENTISTRY - FLUORIDE VARNISHES (ISO 17730:2014) |
I.S. EN 902:2016 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HYDROGEN PEROXIDE |
I.S. EN ISO 8502-2:2017 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINES - PART 2: LABORATORY DETERMINATION OF CHLORIDE ON CLEANED SURFACE (ISO/DIS 8502-2:2013) |
I.S. EN 939:2016 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HYDROCHLORIC ACID |
I.S. EN 1890:2006 | SURFACE ACTIVE AGENTS - DETERMINATION OF CLOUD POINT OF NON-IONIC SURFACE ACTIVE AGENTS OBTAINED BY CONDENSATION OF ETHYLENE OXIDE |
I.S. EN 14368:2015 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MANGANESE DIOXIDE COATED LIMESTONE |
I.S. EN 12606-1:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
DIN EN ISO 11543:2002-06 | MODIFIED STARCH - DETERMINATION OF HYDROXYPROPYL CONTENT - METHOD USING PROTON NUCLEAR MAGNETIC RESONANCE (NMR) SPECTROMETRY |
I.S. EN ISO 13934-1:2013 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013) |
DIN EN 71-3:2017-10 | SAFETY OF TOYS - PART 3: MIGRATION OF CERTAIN ELEMENTS |
I.S. EN 14132:2009 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN BARLEY AND ROASTED COFFEE - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEAN-UP |
I.S. EN ISO 2417:2016 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF THE STATIC ABSORPTION OF WATER (ISO 2417:2016) |
I.S. EN 1811:2011 | REFERENCE TEST METHOD FOR RELEASE OF NICKEL FROM ALL POST ASSEMBLIES WHICH ARE INSERTED INTO PIERCED PARTS OF THE HUMAN BODY AND ARTICLES INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN |
I.S. EN 1245:2011 | ADHESIVES - DETERMINATION OF PH |
I.S. EN 12123:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE |
DIN EN 1911-2:1998-07 | STATIONARY SOURCE EMISSIONS - MANUAL METHOD OF DETERMINATION OF HCL - PART 2: GASEOUS COMPOUNDS ABSORPTION |
I.S. EN 890:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) SULFATE SOLUTION |
I.S. EN 1200:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - TRISODIUM ORTHOPHOSPHATE |
DIN EN ISO 2811-3:2011-06 | Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011); German version EN ISO 2811-3:2011 |
I.S. EN 901:2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYPOCHLORITE |
I.S. EN ISO 8290:1999 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO SULFURIC ACID AT ROOM TEMPERATURE |
DIN EN 1197:2001-03 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MONOZINC PHOSPHATE SOLUTION |
DIN EN 1014-3:2010-11 | Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo(a)pyrene content of creosote |
DIN EN 1811:2015-10 | Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin (includes Amendment A1:2015) |
I.S. EN 14524:2004 | FOODSTUFFS - DETERMINATION OF OKADAIC ACID IN MUSSELS - HPLC METHOD WITH SOLID PHASE EXTRACTION CLEAN-UP, DERIVATIZATION AND FLUORIMETRIC DETECTION |
I.S. EN 12945:2014 | LIMING MATERIALS - DETERMINATION OF NEUTRALISING VALUE - TITRIMETRIC METHODS |
I.S. EN ISO 105-E07:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER |
UNI EN ISO 12402-7 : 2011 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN ISO 6271-1:2005-03 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE - PART 1: VISUAL METHOD |
I.S. EN ISO 14184-2:2011 | TEXTILES - DETERMINATION OF FORMALDEHYDE - PART 2: RELEASED FORMALDEHYDE (VAPOUR ABSORPTION METHOD) |
I.S. EN 13254:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR THE USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
I.S. EN ISO 11127-6:2011 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 6: DETERMINATION OF WATER-SOLUBLE CONTAMINANTS BY CONDUCTIVITY MEASUREMENT (ISO 11127-6:2011) |
I.S. EN 1429:2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
I.S. EN 14152:2014 | FOODSTUFFS - DETERMINATION OF VITAMIN B2 BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
I.S. EN 889:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (2) SULFATE |
I.S. EN ISO 105-G01:2016 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART G01: COLOUR FASTNESS TO NITROGEN OXIDES (ISO 105-G01:2016) |
I.S. EN ISO 7864:2016 | STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS (ISO/DIS 7864:2014) |
I.S. EN 12868:2017 | CHILD USE AND CARE ARTICLES - METHODS FOR DETERMINING THE RELEASE OF N-NITROSAMINES AND N-NITROSATABLE SUBSTANCES FROM ELASTOMER OR RUBBER TEATS AND SOOTHERS |
S.R. CEN/TS 15862:2012 | CHARACTERISATION OF WASTE - COMPLIANCE LEACHING TEST - ONE STAGE BATCH LEACHING TEST FOR MONOLITHS AT FIXED LIQUID TO SURFACE AREA RATIO (L/A) FOR TEST PORTIONS WITH FIXED MINIMUM DIMENSIONS |
DIN EN ISO 4630-1:2005-03 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD |
I.S. EN 1206:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - TETRASODIUM PYROPHOSPHATE |
I.S. EN ISO 8799:2009 | SURFACE ACTIVE AGENTS - SULFATED ETHOXYLATED ALCOHOLS AND ALKYLPHENOLS - DETERMINATION OF CONTENT OF UNSULFATED MATTER |
I.S. EN ISO 22674:2016 | DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES (ISO 22674:2016) |
I.S. EN 1410:2008 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CATIONIC POLYACRYLAMIDES |
I.S. EN 12850:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMINOUS EMULSIONS |
I.S. EN ISO 7887:2011 | WATER QUALITY - EXAMINATION AND DETERMINATION OF COLOUR (ISO 7887:2011) |
I.S. EN ISO 10993-14:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 14: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM CERAMICS (ISO 10993-14:2001) |
I.S. EN ISO 10993-13:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 13: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM POLYMERIC MEDICAL DEVICES (ISO 10993-13:2010) |
I.S. EN 12933:2015 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHEMICALS FOR EMERGENCY USE - TRICHLOROISOCYANURIC ACID |
DIN ISO 8658:2003-03 | TESTING OF CARBONACEOUS MATERIALS - GREEN AND CALCINED COKE - DETERMINATION OF TRACE ELEMENTS BY FLAME ATOMIC ABSORPTION SPECTROSCOPY |
I.S. EN 888:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) CHLORIDE |
DIN 10779:1999-02 | ANALYSIS OF COFFEE AND COFFEE PRODUCTS - DETERMINATION OF 16-O-METHYL CAFESTOL CONTENT OF ROASTED COFFEE - HPLC-METHOD |
EN ISO 11127-3:2011 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2011) |
I.S. EN ISO 2870:2009 | SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF ANIONIC ACTIVE MATTER HYDROLYSABLE AND NON-HYDROLYSABLE UNDER ACID CONDITIONS |
UNI EN ISO 6876 : 2012 | DENTISTRY - ROOT CANAL SEALING MATERIALS |
UNI EN ISO 22032 : 2009 | WATER QUALITY - DETERMINATION OF SELECTED POLYBROMINATED DIPHENYL ETHERS IN SEDIMENT AND SEWAGE SLUDGE - METHOD USING EXTRACTION AND GAS CHROMOTOGRAPHY/MASS SPECTROMETRY |
ONORM EN 12847 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMEN EMULSIONS |
ONORM EN 12121 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM DISULFITE |
ONORM EN ISO 8655-3 : 2009 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 3: PISTON BURETTES |
ONORM EN 899 : 2009 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SULPHURIC ACID |
ONORM EN 1421 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM CHLORIDE |
ONORM EN 12850 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMINOUS EMULSIONS |
ONORM EN 12123 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE |
ONORM EN ISO 8655-5 : 2009 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 5: DISPENSERS |
BS 6782-2(1996) : 1996 AMD 10151 | BINDERS FOR PAINTS - METHOD FOR DETERMINATION OF SAPONIFICATION VALUE (TITRIMETRIC METHOD) |
BS 4401-1:1998 | Methods of test for meat and meat products Determination of total ash |
ONORM EN ISO 8655-7 : 2009 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE ASSESSMENT OF EQUIPMENT PERFORMANCE |
BS 3900-A3(2004) : 2004 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
BS 684-2.34(2001) : 2001 | ANIMAL AND VEGETABLE FATS AND OILS- PREPARATION OF METHYL ESTERS OF FATTY ACIDS |
BS 6043-2.3:1997 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke Determination of trace elements in green and calcined coke by flame atomic absorption spectroscopy |
BS 5081-1:1994 | Sterile hypodermic syringes and needles Specification for sterile, single-use hypodermic syringes for manual use |
I.S. EN ISO 8655-7:2005 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE ASSESSMENT OF EQUIPMENT PERFORMANCE |
BS 684-2.14:1998 | Methods of analysis of fats and fatty oils. Other methods Determination of peroxide value |
BS 1344-3(1998) : 1998 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO SULFURIC ACID AT ROOM TEMPERATURE |
BS 4585-9:1998 | Methods of test for spices and condiments Determination of acid-insoluble ash |
I.S. EN ISO 3262-6:1999 | EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - PRECIPITATED CALCIUM CARBONATE |
BS 3900-F12(1997) : 1997 AMD 13288 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
BS 5766-5:1999 | Methods for analysis of animal feeding stuffs Determination of water-soluble chlorides content |
BS 6068-4.4(2000) : 2000 | WATER QUALITY - DETECTION AND ENUMERATION OF INTESTINAL ENTEROCOCCI - PART 2: MEMBRANE FILTRATION METHOD |
BS 283(1995) : 1995 AMD 13110 | SPECIFICATION FOR IRON BLUE PIGMENTS |
ONORM EN ISO 8655-2 : 2009 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 2: PISTON PIPETTES |
ONORM EN 12125 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM THIOSULFATE |
ONORM EN 15749 : 2010 | FERTILIZERS - DETERMINATION OF SULPHATES CONTENT USING THREE DIFFERENT METHODS |
ONORM EN 12120 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN SULFITE |
BS 3900-B4:1986 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Determination of total lead in paints and similar materials |
BS 2782-4.432C(1997) : 1997 AMD 10258 | METHODS OF TESTING PLASTICS - DETERMINATION OF HYDROXYL VALUE OF UNSATURATED POLYESTER RESINS |
ÖNORM EN ISO 23674:2023 01 01 | Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022) |
BS 4585-3:1998 | Methods of test for spices and condiments Determination of total ash |
BS 6782-7(1996) : 1996 AMD 10177 | BINDERS FOR PAINTS - METHOD FOR DETERMINATION OF FREE-FORMALDEHYDE CONTENT OF AMINO RESINS (SODIUM SULFITE TITRIMETRIC METHOD) |
BS 3473-2:1987 | Chemical resistance of glass used in the production of laboratory glassware Method for determination of hydrolytic resistance of glass grains at 98°C |
ONORM EN ISO 8655-4 : 2009 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 4: DILUTORS |
BS 1344-17:1998 | Methods of testing vitreous enamel finishes Resistance to hot sodium hydroxide solution |
BS 684-2.14:2001 | Methods of analysis of fats and fatty oils. Other methods Determination of peroxide value |
BS 1344-3:1988 | Methods of testing vitreous enamel finishes Determination of resistance to sulphuric acid at room temperature |
BS 6782-4(1996) : 1996 AMD 10149 | BINDERS FOR PAINTS - METHOD FOR DETERMINATION OF HYDROXYL VALUE (TITRIMETRIC METHOD) |
ONORM EN 12126 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - LIQUEFIED AMMONIA |
BS 6625-1(191998) : 1998 | OPHTHALMIC OPTICS - SPECTACLE FRAMES - GENERAL REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 8655-3:2002 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 3: PISTON BURETTES |
BS 6057-3.9:1996 | Rubber latices. Methods of test Determination of pH |
ONORM EN ISO 11644 : 2009 | LEATHER - TEST FOR ADHESION OF FINISH |
ONORM EN 12174 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE |
BS 6057-3.9(1990) : 1990 | RUBBER LATICES - METHODS OF TEST - DETERMINATION OF PH |
BS 6043-1.13:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrode pitch - Determination of sulfur content |
ONORM EN 12175 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HEXAFLUOROSILICIC ACID |
NF EN ISO 3107 : 2011 | DENTISTRY - ZINC OXIDE/EUGENOL AND ZINC OXIDE/NON-EUGENOL CEMENTS |
DIN EN ISO 1135-3:2017-05 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
ONORM EN 16370 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORIDE FOR ON SITE ELECTROCHLORINATION USING MEMBRANE CELLS |
ONORM EN 12124 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM SULFITE |
BS 6782-5:1997 | Binders for paints Method for estimation of colour of clear liquids by the Gardner colour scale |
ONORM EN ISO 8655-6 : 2009 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR |
BS 2782-4.432B(2000) : 2000 | PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE |
BS 2782-4.433B(1998) : 1998 | METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - PLASTICS - EPOXY RESINS AND RELATED MATERIALS - DETERMINATION OF EASILY SAPONIFIABLE CHLORINE |
BS 5202-10:2001 | Methods for chemical analysis of tobacco and tobacco products Determination of organochlorine pesticide residues (gas chromatographic method) |
BS 5766-3:1999 | Methods for analysis of animal feeding stuffs Determination of phosphorus content (spectrometic method) |
DIN ISO 16308:2013-04 (Draft) | WATER QUALITY - DETERMINATION OF GLYPHOSATE AND AMPA - METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) WITH TANDEM MASS SPECTROMETRIC DETECTION (ISO 16308:2014) |
UNE-EN ISO 17694:2016 | Footwear - Test methods for uppers and lining - Flex resistance (ISO 17694:2016) |
BS EN ISO 17071:2011 | Leather. Physical and mechanical tests. Determination of fogging characteristics |
UNE-EN ISO 4938:2016 | Steel and iron - Determination of nickel content - Gravimetric or titrimetric method (ISO 4938:2016) |
UNE-CEN/TS 16233-2:2012 EX | Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh - Part 2: Identification of the enantiomer ratio of astaxanthin |
17/30345789 DC : 0 | BS EN 648 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
DIN EN ISO 16591:2011-04 | Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010) |
EN ISO 3262-19:2000 | Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2000) |
DIN EN 15560:2009-06 | Fertilizers - Determination of total nitrogen in calcium cyanamide nitrate free |
DIN EN ISO 16050:2011-09 | Foodstuffs - Determination of aflatoxin B<(Index)1>, and the total content of aflatoxins B<(Index)1>, B<(Index)2>, G<(Index)1> and G<(Index)2> in cereals, nuts and derived products - High performance liquid chromatographic method (ISO 16050:2003); German version EN ISO 16050:2011 |
PREN 12829 : DRAFT 2009 | SURFACE ACTIVE AGENTS - PREPARATION OF WATER WITH KNOWN CALCIUM AND MAGNESIUM HARDNESS |
BS EN 16109:2011 | Fertilizers. Determination of complexed micro-nutrient ions in fertilizers. Identification of lignosulfonates |
09/30195933 DC : 0 | BS ISO 14403-1 - WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE USING FLOW ANALYSIS (FIA AND CFA) - PART 1: METHOD WITH FLOW INJECTION ANALYSIS (FIA) |
DIN EN ISO 17380:2013-10 | SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE AND EASILY LIBERATABLE CYANIDE - CONTINUOUS-FLOW ANALYSIS METHOD (ISO 17380:2013) |
DIN EN 15074:2015-02 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - OZONE |
UNI EN 15751 : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
02/561460 DC : DRAFT MAR 2002 | BS ISO 14256-2 - SOIL QUALITY - DETERMINATION OF NITRATE, NITRITE AND AMMONIUM IN FIELD-MOIST SOILS BY EXTRACTION WITH POTASSIUM CHLORIDE SOLUTION - PART 2: AUTOMATED METHOD |
UNI EN 16206 : 2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF ARSENIC BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HGAAS) AFTER MICROWAVE PRESSURE DIGESTION (DIGESTION WITH 65% NITRIC ACID AND 30% HYDROGEN PEROXIDE) |
11/30241721 DC : 0 | BS EN 62321-6 ED1 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 6: DETERMINATION OF POLYBROMINATED BIPHENYLS AND POLYBROMINATED DIPHENYL ETHERS IN POLYMERS AND ELECTRONICS BY GC-MS, IAMS AND HPLC-UV |
BS ISO 22961:2008 | Titanium and titanium alloys. Determination of iron. Atomic absorption spectrometry |
03/309868 DC : DRAFT AUG 2003 | PREN ISO/DIS 17895 - PAINTS AND VARNISHES - DETERMINATION OF THE VOLATILE ORGANIC COMPOUND (IN-CAN VOC) CONTENT OF WATER-BASED EMULSION PAINTS |
BS EN ISO 27587:2009 | Leather. Chemical tests. Determination of the free formaldehyde in process auxiliaries |
12/30234431 DC : 0 | BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS |
02/562596 DC : DRAFT JUN 2002 | BS ISO 10390 - SOIL QUALITY - DETERMINATION OF PH |
I.S. EN ISO 811:2018 | TEXTILES - DETERMINATION OF RESISTANCE TO WATER PENETRATION - HYDROSTATIC PRESSURE TEST (ISO 811:2018) |
DIN EN ISO 28399:2011-05 | DENTISTRY - PRODUCTS FOR EXTERNAL TOOTH BLEACHING |
ONORM EN ISO 10139-1 : 2006 | DENTISTRY - SOFT LINING MATERIALS FOR REMOVABLE DENTURES - PART 1: MATERIALS FOR SHORT-TERM USE |
DIN ISO 14502-1:2007-11 | DETERMINATION OF SUBSTANCES CHARACTERISTIC OF GREEN AND BLACK TEA - PART 1: CONTENT OF TOTAL POLYPHENOLS IN TEA - COLORIMETRIC METHOD USING FOLIN-CIOCALTEU REAGENT |
S.R. CEN/TS 14417:2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF WETTING-DRYING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
DIN EN 1568-4:2016-08 (Draft) | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 4: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-MISCIBLE LIQUIDS |
I.S. EN 4159:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO MICROBIAL GROWTH |
DIN EN ISO 29022:2013-09 | Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013); German version EN ISO 29022:2013 |
I.S. EN 15890:2010 | FOODSTUFFS - DETERMINATION OF PATULIN IN FRUIT JUICE AND FRUIT BASED PUREE FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH LIQUID/LIQUID PARTITION CLEANUP AND SOLID PHASE EXTRACTION AND UV DETECTION |
I.S. EN ISO 15181-6:2014 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 6: DETERMINATION OF TRALOPYRIL RELEASE RATE BY QUANTITATION OF ITS DEGRADATION PRODUCT IN THE EXTRACT (ISO 15181-6:2012) |
I.S. EN 16651:2015 | FERTILIZERS - DETERMINATION OF N-(N-BUTYL)THIOPHOSPHORIC ACID TRIAMIDE (NBPT) AND N-(N-PROPYL)THIOPHOSPHORIC ACID TRIAMIDE (NPPT) - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
BS EN ISO 10270:2008 | Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors |
BS ISO 4619 : 1998 | DRIERS FOR PAINTS AND VARNISHES |
04/30123306 DC : DRAFT OCT 2004 | EN ISO 12014-3 - FOODSTUFFS - DETERMINATION OF NITRATE AND OR NITRITE CONTENT - PART 3: SPECTROMETRIC DETERMINATION OF NITRATE AND NITRITE CONTENT OF MEAT PRODUCTS AFTER ENZYMATIC REDUCTION OF NITRATE TO NITRITE |
DIN EN ISO 17075-1:2015-07 (Draft) | LEATHER - CHEMICAL DETERMINATION OF CHROMIUM(6) CONTENT IN LEATHER - PART 1: COLORIMETRIC METHOD (ISO 17075-1:2017) |
BS EN 14164:2014 | Foodstuffs. Determination of vitamin B6 by high performance chromatography |
NF ISO 20370 : 2009 | MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF ACETATE CONTENT |
ISO 13898-2:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of nickel content |
UNI EN 15851 : 2010 | Foodstuffs - Determination of aflatoxin B1 in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection |
ISO 18787:2017 | Foodstuffs — Determination of water activity |
UNI EN 15704 : 2009 | LIMING MATERIALS - DETERMINATION OF THE BREAKDOWN OF GRANULATED CALCIUM AND CALCIUM/MAGNESIUM CARBONATES UNDER THE INFLUENCE OF WATER |
DIN EN ISO 12782-4:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO 12782-4:2012) |
BS EN ISO 5403-2:2011 | Leather. Determination of water resistance of flexible leather Repeated angular compression (Maeser) |
17/30295121 DC : DRAFT JAN 2017 | BS EN ISO 7393-2 - WATER QUALITY - DETERMINATION OF FREE CHLORINE AND TOTAL CHLORINE - PART 2 - COLORIMETRIC METHOD USING N,N-DIETHYL-1,4-PHENYLENEDIAMINE, FOR ROUTINE CONTROL PURPOSES |
13/30275372 DC : 0 | BS ISO 13164-4 - WATER QUALITY - RADON-222 - PART 4: TEST METHOD USING TWO-PHASE LIQUID SCINTILLATION COUNTING |
BS EN ISO 4619:2010 | Driers for paints and varnishes |
ISO 17322:2015 | Fertilizers and soil conditioners Analytical methods for Sulfur Coated Urea (SCU) |
BS EN ISO 22032:2009 | Water quality. Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge. Method using extraction and gas chromatography/mass spectrometry |
BS ISO 9940:2015 | Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
12/30268694 DC : 0 | BS EN 900 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM HYPOCHLORITE |
DIN EN ISO 28706-1:2011-08 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008) |
BS 3900-K3(2007) : 2007 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 3: CALCULATION OF THE ZINC ETHYLENE-BIS(DITHIOCARBAMATE) (ZINEB) RELEASE RATE BY DETERMINATION OF THE CONCENTRATION OF ETHYLENETHIOUREA IN THE EXTRACT |
BS ISO 15825:2017 | Rubber compounding ingredients. Carbon black. Determination of aggregate size distribution by disc centrifuge photosedimentometry |
BIS IS/ISO 13402 : 1995 | SURGICAL AND DENTAL HAND INSTRUMENTS - DETERMINATION OF RESISTANCE AGAINST AUTOCLAVING, CORROSION AND THERMAL EXPOSURE |
16/30334074 DC : 0 | BS ISO 22241-1 - DIESEL ENGINES NO[X] REDUCTION AGENT AUS 32 - PART 1: QUALITY REQUIREMENTS |
I.S. EN ISO 4938:2016 | STEEL AND IRON - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD (ISO 4938:2016) |
I.S. EN 16320:2013 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
12/30255965 DC : DRAFT SEP 2012 | BS EN ISO 12228-2 - DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - OLIVE AND OLIVE POMACE OILS |
I.S. EN ISO 1562:2004 | DENTISTRY - CASTING GOLD ALLOYS |
DIN EN 16206:2012-05 | Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) |
NF EN ISO 105 A01 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING |
BS ISO 17294-2 : 2003 AMD 15467 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 2: DETERMINATION OF 62 ELEMENTS |
DIN EN ISO 16373-3:2014-10 | TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARCINOGENIC DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) (ISO 16373-3:2014) |
13/30280888 DC : 0 | BS EN ISO 4263-3 - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS |
ISO 14388-3:2014 | Soil quality Acid-base accounting procedure for acid sulfate soils Part 3: Suspension peroxide oxidation combined acidity and sulfur (SPOCAS) methodology |
ISO/TS 19620:2018 | Water quality — Determination of arsenic(III) and arsenic(V) species — Method using high performance liquid chromatography (HPLC) with detection by inductively coupled plasma mass spectrometry (ICP-MS) or hydride generation atomic fluorescence spectrometry (HG-AFS) |
UNE-EN ISO 4629-2:2018 | Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst (ISO 4629-2:2016) |
I.S. EN 12447:2002 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO HYDROLYSIS IN WATER |
UNI EN ISO 16265 : 2012 | WATER QUALITY - DETERMINATION OF THE METHYLENE BLUE ACTIVE SUBSTANCES (MBAS) INDEX - METHOD USING CONTINUOUS FLOW ANALYSIS (CFA) |
BS ISO 13741-2:1998 | Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography Headspace method |
BS ISO 17218:2014 | Sterile acupuncture needles for single use |
13/30272463 DC : 0 | BS EN ISO 17698 - FOOTWEAR - TEST METHODS FOR UPPERS - DELAMINATION RESISTANCE |
BS 3900-A22(1998) : 1998 AMD 13284 | METHODS OF TEST FOR PAINTS - DETERMINATION OF DENSITY BY THE PRESSURE CUP METHOD |
17/30329977 DC : DRAFT SEP 2017 | BS ISO 20158 - TEXTILES - DETERMINATION OF WATER ABSORBENCY OF TEXTILE FABRICS |
08/30188242 DC : DRAFT AUG 2008 | BS EN 15850 - FOODSTUFFS - DETERMINATION OF ZEARALENONE IN BARLEY, MAIZE AND WHEAT FLOUR, POLENTA AND CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
16/30330362 DC : 0 | BS ISO 22875 - NUCLEAR ENERGY - DETERMINATION OF CHLORINE AND FLUORINE IN URANIUM DIOXIDE POWDER AND SINTERED PELLETS |
09/30168905 DC : 0 | BS ISO 28158 - DENTISTRY - INTEGRATED DENTAL FLOSS HOLDERS |
07/30169525 DC : 0 | BS EN 15721 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
I.S. EN ISO 7783-1:1999 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE - PART 1: DISH METHOD FOR FREE FILMS |
16/30335287 DC : 0 | BS ISO 15825 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF AGGREGATE SIZE DISTRIBUTION BY DISC CENTRIFUGE PHOTOSEDIMENTOMETRY |
BS 4289-9(1993) : 1993 AMD 8830 | METHODS FOR THE ANALYSIS OF OILSEEDS - DETERMINATION OF GLUCOSINOLATES CONTENT OF RAPESEED BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
DIN EN 15851:2010-07 | Foodstuffs - Determination of aflatoxin B<(Index)1> in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection; German version EN 15851:2010 |
I.S. EN ISO 5163:2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
16/30337378 DC : 0 | BS EN ISO 28319 - DENTISTRY - LASER WELDING |
14/30300948 DC : 0 | BS EN 939 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HYDROCHLORIC ACID |
I.S. EN ISO 25649-1:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017) |
DIN EN ISO 14362-3:2015-06 (Draft) | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 3: DETECTION OF THE USE OF CERTAIN AZO COLORANTS, WHICH MAY RELEASE 4-AMINOAZOBENZENE (ISO 14362-3:2017) |
DIN EN 16006:2011-10 | Animal feeding stuffs - Determination of the sum of fumonisin B<(Index)1> and B<(Index)2> in compound animal feed with immunoaffinity clean-up and RP-HPLC with fluorescence detection after pre- or post-column derivatisation |
13/30250128 DC : 0 | BS EN ISO 8502-2 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 2: LABORATORY DETERMINATION OF CHLORIDE ON CLEANED SURFACES |
DIN EN 16204:2012-08 | FOODSTUFFS - DETERMINATION OF LIPOPHILIC ALGAL TOXINS (OKADAIC ACID GROUP TOXINS, YESSOTOXINS, AZASPIRACIDS, PECTENOTOXINS) IN SHELLFISH AND SHELLFISH PRODUCTS BY LC-MS/MS |
I.S. EN 20-1:1993 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST LYCTUS BRUNNEUS (STEPHENS) - APPLICATION BY SURFACE TREATMENT (LABORATORY METHOD) |
BIS IS 1448-123 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 123: PETROLEUM PRODUCTS AND LUBRICANTS - INHIBITED MINERAL TURBINE OILS - DETERMINATION OF OXIDATION STABILITY |
10/30197959 DC : 0 | BS ISO 7206-6 - IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP JOINT PROSTHESES - PART 6: DETERMINATION OF ENDURANCE PROPERTIES OF HEAD AND NECK REGION OF STEMMED FEMORAL COMPONENTS |
16/30340560 DC : 0 | BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
BS ISO 10523 : 2008 | WATER QUALITY - DETERMINATION OF PH |
13/30282501 DC : 0 | BS EN 15195 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
UNI EN ISO 5398-1 : 2008 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 1: QUANTIFICATION BY TITRATION |
BS ISO 22765:2016 | Nuclear fuel technology. Sintered (U,Pu)O<sub>2</sub> pellets. Guidance for ceramographic preparation for microstructure examination |
I.S. EN 12595:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
16/30302164 DC : 0 | BS EN 1568-3 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 3: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
BS EN ISO 2812-1:2017 | Paints and varnishes. Determination of resistance to liquids Immersion in liquids other than water |
12/30258191 DC : 0 | BS EN 12386 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE |
DD CEN/TS 16187:2011 | Foodstuffs. Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection after precolumn derivatization |
I.S. EN ISO 20795-2:2013 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO 20795-2:2013) |
01/714936 DC : DRAFT NOV 2001 | ISO 4934 - STEEL AND IRON - DETERMINATION OF SULFUR CONTENT - GRAVIMETRIC METHOD |
BS ISO 10349-1:2002 | Photography. Photographic-grade chemicals. Test methods General |
16/30341249 DC : 0 | BS EN 17050 - ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF IODINE IN ANIMAL FEED BY ANION-EXCHANGE ICP-MS |
BIS IS/ISO 105-E12 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING |
BS EN 15851:2010 | Foodstuffs. Determination of aflatoxin B1 in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection |
13/30276415 DC : 0 | BS EN ISO 4938 - STEEL AND IRONS - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD |
BS 6068-4.18(2004) : 2004 | WATER QUALITY - DETECTION AND ENUMERATION OF LEGIONELLA - PART 2: DIRECT MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL COUNTS |
03/305268 DC : DRAFT APR 2003 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) FOR THE DETERMINATION OF ELEMENTS - PART 1: GENERAL GUIDELINES AND BASIC PRINCIPLES |
I.S. EN 1122:2001 | PLASTICS - DETERMINATION OF CADMIUM - WET DECOMPOSITION METHOD |
BS EN ISO 12782-3:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid |
13/30250826 DC : 0 | BS ISO 17280 - SURFACE ACTIVE AGENTS - DETERMINATION OF THE 1,4-DIOXANE RESIDUES IN SURFACTANTS OBTAINED FROM EPOXYETHANE BY GAS CHROMATOGRAPHY |
BS EN 16847:2016 | Fertilizers. Determination of complexing agents in fertilizers. Identification of heptagluconic acid by chromatography |
PREN 13138-3 : DRAFT 2012 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
BS 3473-5:1987 | Chemical resistance of glass used in the production of laboratory glassware Method for determination of resistance of glass to attack by 6 mol/L hydrochloric acid at 100°C |
UNE-EN ISO 28706-4:2016 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016) |
NF ISO 23161 : 2009 | SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD |
I.S. EN ISO 14403:2002 | WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE BY CONTINUOUS FLOW ANALYSIS |
BS 6068-2.80(2002) : 2002 | WATER QUALITY - DETERMINATION OF THE CHEMICAL OXYGEN DEMAND INDEX (ST-COD) - SMALL-SCALE SEALED-TUBE METHOD |
14/30300936 DC : 0 | BS EN 12678 - CHEMICAL USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POTASSIUM PEROXOMONOSULFATE |
08/30179304 DC : DRAFT MAY 2008 | BS EN 15476 - FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO DEVARDA |
NF EN ISO 23913 : 2009 | WATER QUALITY - DETERMINATION OF CHROMIUM(6) - METHOD USING FLOW ANALYSIS (FIA AND CFA) AND SPECTROMETRIC DETECTION |
15/30314064 DC : 0 | BS EN 12868 - CHILD USE AND CARE ARTICLES - METHODS FOR DETERMINING THE RELEASE OF N-NITROSAMINES AND N-NITROSATABLE SUBSTANCES FROM ELASTOMER OR RUBBER TEATS AND SOOTHERS |
13/30250436 DC : 0 | BS EN ISO 8502-12 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 12: FIELD METHOD FOR THE TITRIMETRIC DETERMINATION OF WATER-SOLUBLE FERROUS IONS |
DIN EN ISO 28723:2011-06 | Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers (ISO 28723:2008) |
BS ISO 11041:1996 | Workplace air. Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour. Method by hydride generation and atomic absorption spectrometry |
BS ISO 17319:2015 | Fertilizers and soil conditioners. Determination of water-soluble potassium content. Potassium tetraphenylborate gravimetric method |
12/30258194 DC : 0 | BS EN 12173 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM FLUORIDE |
UNI EN 15559 : 2009 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO ARND |
10/30231994 DC : 0 | BS EN ISO 28723 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF THE EDGE COVERING ON ENAMELLED STEEL PLATE TO BE USED IN HEAT EXCHANGERS |
I.S. EN ISO 12228:1999 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD |
DIN ISO 20481:2011-01 | Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method (ISO 20481:2008) |
BS EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography |
BS EN ISO 15181-6:2014 | Paints and varnishes. Determination of release rate of biocides from antifouling paints Determination of tralopyril release rate by quantitation of its degradation product in the extract |
15/30312397 DC : 0 | BS EN 16866 - METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST) |
I.S. EN ISO 10139-1:2005 | DENTISTRY - SOFT LINING MATERIALS FOR REMOVABLE DENTURES - PART 1: MATERIALS FOR SHORT-TERM USE (ISO 10139-1:2018) |
08/30179322 DC : DRAFT JUNE 2008 | BS EN 15560 - FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN CALCIUM CYANAMIDE NITRATE FREE |
16/30292319 DC : DRAFT JUNE 2016 | BS ISO 22765 - SINTERED (U,PU)O[2] PELLETS - GUIDANCE FOR CERAMOGRAPHIC PREPARATION FOR MICROSTRUCTURE EXAMINATION |
I.S. EN ISO 11507:2007 | PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER |
15/30324880 DC : 0 | BS EN 46-2 - WOOD PRESERVATIVES - DETERMINATION OF THE PREVENTIVE ACTION AGAINST RECENTLY HATCHED LARVAE OF HYLOTRUPES BAJULUS (LINNAEUS) - PART 2: OVICIDAL EFFECT (LABORATORY METHOD) |
02/123042 DC : DRAFT JULY 2002 | EN ISO 4630-1 - CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD |
17/30335356 DC : DRAFT MAY 2017 | BS ISO 28641 - RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS |
14/30301974 DC : 0 | BS ISO 10203 - IRON ORES - DETERMINATION OF CALCIUM - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
DD CEN/TS 14495:2003 | Leather. Chemical tests. Determination of chromium VI content |
10/30218124 DC : 0 | BS EN 16109 - FERTILIZERS - DETERMINATION OF MICRO-NUTRIENT IONS COMPLEXED IN FERTILIZERS - IDENTIFICATION OF LIGNOSULFONATES |
BS 6068-2.73(2001) : 2001 | WATER QUALITY - DETERMINATION OF DISSOLVED BROMATE - METHOD BY LIQUID CHROMATOGRAPHY OF IONS |
00/562025 DC : DRAFT MAY 2000 | ISO 17190-1 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 1: DETERMINATION OF PH |
14/30300939 DC : 0 | BS EN 12671 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHLORINE DIOXIDE GENERATED IN SITU |
BS ISO 11350:2012 | Water quality. Determination of the genotoxicity of water and waste water. Salmonella/microsome fluctuation test (Ames fluctuation test) |
06/30158897 DC : 0 | BS EN 15606 - FOODSTUFFS - DETERMINATION OF ACESULFAME-K, ASPARTAME, NEOHESPERIDINEDIHYDROCHALCONE AND SACCHARIN - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
BS EN ISO 14719:2011 | Chemical analysis of refractory material glass and glazes. Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline |
BS ISO 10727:2002 | Tea and instant tea in solid form. Determination of caffeine content. Method using high-performance liquid chromatography |
BS EN ISO 8623:2015 | Tall-oil fatty acids for paints and varnishes. Test methods and characteristic values |
UNI EN ISO 17304 : 2014 | DENTISTRY - POLYMERIZATION SHRINKAGE: METHOD FOR DETERMINATION OF POLYMERIZATION SHRINKAGE OF POLYMER-BASED RESTORATIVE MATERIALS |
BS ISO 11609 : 95 AMD 10061 | DENTISTRY - TOOTHPASTES - REQUIREMENTS, TEST METHODS AND MARKING |
BS 7820-1:1995 | Analysis of tea and tea products Tea and instant tea. Determination of caffeine content |
BS ISO 15634:2015 | Iron ores. Determination of chromium content. Flame atomic absorption spectrometric method |
DIN EN 15705:2010-07 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylene-urea oligomers (method B); German version EN 15705:2010 |
BS ISO 13547-1:2014 | Copper, lead, zinc and nickel sulfide concentrates. Determination of arsenic Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method |
08/30180111 DC : DRAFT MAR 2008 | BS EN ISO 17234 - LEATHER - CHEMICAL TESTS - DETERMINATION OF CERTAIN AZO COLOURANTS IN DYED LEATHERS |
15/30313584 DC : 0 | BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
AEP-64 : 2012 | PERFORMANCE REQUIREMENTS FOR PAINT SYSTEMS RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT |
BS ISO 15181-6 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 6: DETERMINATION OF TRALOPYRIL RELEASE RATE BY QUANTITATION OF ITS DEGRADATION PRODUCT IN THE EXTRACT |
BS 2000-156(2007) : 2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
16/30320885 DC : DRAFT JULY 2016 | BS EN 60754-3 - TESTS ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 3: DETECTION OF LOW LEVEL OF HALOGEN CONTENT BY ION CHROMATOGRAPHY |
04/19975534 DC : 0 | EN 4195 - AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF CHROMATE LEACHING |
S.R. CEN ISO TS 21268-4:2009 | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 4: INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
15/30301240 DC : 0 | BS EN ISO 17075-1 - LEATHER - CHEMICAL DETERMINATION OF CHROMIUM(6) CONTENT IN LEATHER - PART 1: COLORIMETRIC METHOD |
14/30300954 DC : 0 | BS EN 902 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HYDROGEN PEROXIDE |
15/30288430 DC : 0 | BS ISO 14869-3 - SOIL QUALITY - DISSOLUTION FOR THE DETERMINATION OF TOTAL ELEMENT CONTENT - PART 3: DISSOLUTION WITH HYDROFLUORIC, HYDROCHLORIC AND NITRIC ACIDS USING PRESSURISED MICROWAVE TECHNIQUE |
12/30258761 DC : 0 | BS EN 14122 - FOODSTUFFS - DETERMINATION OF VITAMIN B1 BY HPLC |
UNE 38863:2012 | Titanium and titanium alloys. Determination of iron. Inductively coupled plasma atomic emission spectrometry. |
BS EN ISO 28706-4:2016 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel |
BS EN 16857:2017 | Foodstuffs. Determination of benzene in soft drinks, other beverages and vegetable-based infant foods by headspace gas chromatography mass spectrometry (HS-GC-MS) |
09/30199124 DC : 0 | BS EN ISO 17072-2 - LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
BS ISO 26482:2010 | Hardmetals. Determination of lead and cadmium content |
EN 1568-1:2018 | Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids |
04/30104986 DC : DRAFT OCT 2004 | EN 46-2 - WOOD PRESERVATIVES - DETERMINATION OF THE PREVENTATIVE ACTION AGAINST RECENTLY HATCHED LARVAE OF HYLOTRUPES BAJULUS (LINNAEUS) - PART 2: OVICIDAL AND LARVICIDAL EFFECTS (LABORATORY METHOD) |
UNE-EN 15482:2013 | Chemicals used for treatment of water intended for human consumption - Sodium permanganate |
I.S. EN 14362-2:2003 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 2: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE BY EXTRACTING THE FIBRES |
10/30197305 DC : 0 | BS ISO 11350 - WATER QUALITY - DETERMINATION OF THE GENOTOXICITY OF WATER AND WASTE WATER - SALMONELA/MICROSOME FLUCTUATION TEST (AMES FLUCTUATION TEST) |
DIN EN ISO 15181-5:2008-09 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 5: CALCULATION OF THE TOLYLFLUANID AND DICHLOFLUANID RELEASE RATE BY DETERMINATION OF THE CONCENTRATION OF DIMETHYLTOLYLSULFAMIDE (DMST) AND DIMETHYLPHENYLSULFAMIDE (DMSA) IN THE EXTRACT |
12/30257910 DC : 0 | BS EN 15028 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORATE |
DD ISO/TS 17764-1 : 2002 AMD 16946 | ANIMAL FEEDING STUFFS - DETERMINATION OF THE CONTENT OF FATTY ACIDS - PREPARATION OF METHYL ESTERS |
08/30179310 DC : DRAFT MAY 2008 | BS EN 15478 - FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
BS EN 16175-2:2016 | Sludge, treated biowaste and soil. Determination of mercury Cold-vapour atomic fluorescence spectrometry (CV-AFS) |
15/30327160 DC : 0 | BS EN 12672 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POTASSIUM PERMANGANATE |
ISO 18074:2015 | Textiles Identification of some animal fibres by DNA analysis method Cashmere, wool, yak and their blends |
ISO 6978:1992 | Natural gas Determination of mercury |
06/30145861 DC : DRAFT FEB 2006 | ISO 9682-2 - IRON ORES - DETERMINATION OF MANGANESE CONTENT - PART 2: PERIODATE SPECTROPHOTOMETRIC METHOD |
BS 2000-431(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF ACID NUMBER - SEMI-MICRO COLOUR-INDICATOR TITRATION METHOD |
14/30288021 DC : 0 | BS EN ISO 11085 - CEREALS, CEREALS-BASED PRODUCTS AND ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT AND TOTAL FAT CONTENT BY THE RANDALL EXTRACTION METHOD |
12/30270459 DC : 0 | BS ISO 24362-1 - TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 1: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE WITH AND WITHOUT EXTRACTING THE FIBRES |
09/30168911 DC : 0 | BS ISO 28399 - DENTISTRY - PRODUCTS FOR EXTERNAL TOOTH BLEACHING |
ISO 3856-5:1984 | Paints and varnishes — Determination of "soluble" metal content — Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form — Diphenylcarbazide spectrophotometric method |
DD CEN/TS 15754:2008 | Animal feeding stuffs. Determination of sugar content. High performance exchange chromatographic method (HPAEC-PAD) |
14/30292000 DC : 0 | BS ISO 19242 - RUBBER - DETERMINATION OF TOTAL SULFUR CONTENT BY ION CHROMATOGRAPHY |
NF ISO 5794-1 : 2010 | RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 1: NON-RUBBER TESTS |
09/30195937 DC : 0 | BS ISO 14403-2 - WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE USING FLOW ANALYSIS (FIA AND CFA) - PART 2: METHOD WITH CONTINUOUS FLOW ANALYSIS (CFA) |
DIN EN 15041 E : 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - POLYPHOSPHATES |
UNE-EN 14164:2014 | Foodstuffs - Determination of vitamin B6 by high performance chromatography |
DD CEN/TS 15478:2006 | Fertilizers. Determination of total nitrogen in urea |
BS EN 16166:2012 | Sludge, treated biowaste and soil. Determination of adsorbable organically bound halogens (AOX) |
UNE-EN ISO 13160:2016 | Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012) |
UNE-EN ISO 13078-2:2017 | Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze (ISO 13078-2:2016) |
14/30300951 DC : 0 | BS EN 938 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORITE |
DD ENV 1014-3:1996 | Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis Determination of the benzo(<i>a</i>)pyrene content of creosote |
BS 6068-2.62(1998) : 1998 | WATER QUALITY - PHYSICAL, CHEMICAL AND BIOCHEMICAL METHODS - DETERMINATION OF NITROGEN - METHOD USING OXIDATIVE DIGESTION WITH PEROXODISULFATE |
BS EN ISO 15681-2:2004 | Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Method by continuous flow analysis (CFA) |
PD CEN/TS 16384:2012 | Synthetic sport systems. Leaching test |
UNI EN 15692 : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
PREN 15510 : DRAFT 2016 | ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
11/30252539 DC : 0 | BS EN 10355 - CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO, SN [ROUTINE METHOD] |
UNI CEN/TS 15754 : 2009 | ANIMAL FEEDING STUFFS - DETERMINATION OF SUGAR CONTENT - HIGH PERFORMANCE EXCHANGE CHROMATOGRAPHIC METHOD (HPAEC-PAD) |
UNI EN 15749 : 2009 | FERTILIZERS - DETERMINATION OF SULFATES CONTENT USING THREE DIFFERENT METHODS |
BS EN ISO 16050:2011 | Foodstuffs. Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products. High-performance liquid chromatographic method |
03/314577 DC : DRAFT OCT 2003 | EN 14832 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF PHOSPHATE ESTER FLUIDS |
13/30261093 DC : 0 | BS ISO 17942 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS FOR CHEMICAL ANALYSIS OF BORON NITRIDE POWDERS |
UNI CEN/TS 839 : 2008 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST WOOD DESTROYING BASIDIOMYCETES - APPLICATION BY SURFACE TREATMENT |
UNI CEN/TS 16375 : 2013 | LIMING MATERIALS - DETERMINATION OF THE AMOUNT OF RESIDUAL FINELY GROUND CARBONATE IN SOILS - VOLUMETRIC METHOD |
13/30277530 DC : 0 | BS ISO 21048 - PLASTICS - EPOXY RESINS - DETERMINATION OF 1,2-GLYCOL CONTENT |
13/30267142 DC : 0 | BS EN 12606-1 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
01/120853 DC : DRAFT FEB 2001 | ISO/DIS 17710 PLASTICS - POLYOLS FOR USE IN THE PRODUCTION OF POLYURETHANE - DETERMINATION OF UNSATURATION BY MICROTITRATION |
BS ISO 13165-1:2013 | Water quality. Radium-226 Test method using liquid scintillation counting |
14/30251849 DC : 0 | BS ISO 17211 - STATIONARY SOURCE EMISSIONS - SAMPLING AND DETERMINATION OF SELENIUM COMPOUNDS IN FLUE GAS |
10/30203856 DC : 0 | BS EN ISO 12870 - OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS |
BS EN ISO 20795-2:2013 | Dentistry. Base polymers Orthodontic base polymers |
PD CEN/TS 16320:2012 | Fertilizers. Determination of trace elements. Determination of mercury by vapour generation (VG) after aqua regia dissolution |
UNI CEN/TS 15412 : 2010 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF METALLIC ALUMINIUM |
I.S. EN 15962:2011 | FERTILIZERS - DETERMINATION OF THE COMPLEXED MICRO-NUTRIENT CONTENT AND OF THE COMPLEXED FRACTION OF MICRO-NUTRIENTS |
06/30114115 DC : DRAFT APR 2006 | ISO 6872 - DENTISTRY - CERAMIC MATERIALS |
12/30250119 DC : 0 | BS EN ISO 16373-2 - TEXTILES - DYESTUFFS - PART 2: GENERAL METHOD FOR THE DETERMINATION OF EXTRACTABLE DYESTUFFS INCLUDING ALLERGENIC AND CARCINOGENIC SUBSTANCES |
BS EN 16357:2013 | Carbonate liming materials. Determination of reactivity. Automatic titration method with citric acid |
02/120872 DC : DRAFT FEB 2002 | BS EN 14362-1 - TEXTILES - METHODS FOR THE DETECTION AND DETERMINATION OF CERTAIN LISTED AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 1: DIRECT TEST ON COLOURED TEXTILES - DETECTION OF THE USE OF CERTAIN AZO COLORANTS THAT ARE ACCESSIBLE TO REDUCING AGENTS WITHOUT EXTRACTION |
DD CEN/TS 14537:2003 | Foodstuffs. Determination of neohesperidin-dihydrochalcon |
PD ISO/TS 10719:2016 | Cast irons. Determination of non-combined carbon content. Infrared absorption method after combustion in an induction furnace |
DIN ISO 14154:2005-12 | Soil quality - Determination of some selected chlorophenols - Gas-chromatographic method with electron-capture detection (ISO 14154:2005) |
15/30321302 DC : 0 | BS EN 16877 - ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF T-2 AND HT-2 TOXINS, DEOXYNIVALENOL AND ZEARALENONE, IN FEED MATERIALS AND COMPOUND FEED BY LC-MS |
DIN EN 15750:2010-02 | Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
BS 7678:1993 | Method for determination of mercury in natural gas |
BS ISO 9683-1:2006 | Iron ores. Determination of vanadium BPHA spectrophotometric method |
BS ISO 13781:2017 | Implants for surgery. Homopolymers, copolymers and blends on poly(lactide). In vitro degradation testing |
BS ISO 11277:2009 | Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation |
PREN 15488 : DRAFT 2006 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD |
UNI EN ISO 5403-1 : 2012 | LEATHER - DETERMINATION OF WATER RESISTANCE OF FLEXIBLE LEATHER - PART 1: REPEATED LINEAR COMPRESSION (PENETROMETER) |
13/30272451 DC : 0 | BS EN ISO 17694 - FOOTWEAR - TEST METHODS FOR UPPERS AND LINING - FLEX RESISTANCE |
UNI CEN/TS 16172 : 2013 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ELEMENTS USING GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) |
UNI EN 15721 : 2013 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
DIN EN ISO 19074:2015-12 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF WATER ABSORPTION BY CAPILLARY ACTION (WICKING) (ISO 19074:2015) |
02/561161 DC : DRAFT FEB 2002 | BS EN ISO 16408 - DENTISTRY - ORAL HYGIENE PRODUCTS - ORAL RINSES |
BS ISO 10348:1993 | Photography. Processing wastes. Determination of silver content |
DIN EN 15607:2009-09 | Foodstuffs - Determination of d-biotin by HPLC |
ISO 11125-4:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 4: Determination of apparent density |
PD CEN/TS 16637-2:2014 | Construction products. Assessment of release of dangerous substances Horizontal dynamic surface leaching test |
BS 6068-2.82(2003) : 2003 | WATER QUALITY - DETERMINATION OF SIX COMPLEXING AGENTS - GAS-CHROMATOGRAPHIC METHOD |
11/30250575 DC : 0 | BS EN 1429 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
UNI EN 15750 : 2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN FERTILIZERS CONTAINING NITROGEN ONLY AS NITRIC, AMMONIACAL AND UREA NITROGEN BY TWO DIFFERENT METHODS |
ISO 14869-3:2017 | Soil quality — Dissolution for the determination of total element content — Part 3: Dissolution with hydrofluoric, hydrochloric and nitric acids using pressurised microwave technique |
BS ISO 7206-4 : 2010 | IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP JOINT PROSTHESES - PART 4: DETERMINATION OF ENDURANCE PROPERTIES AND PERFORMANCE OF STEMMED FEMORAL COMPONENTS |
DIN EN ISO 19250:2013-06 | WATER QUALITY - DETECTION OF SALMONELLA SPP. (ISO 19250:2010) |
UNE-EN 16007:2011 | Animal feedin stuffs - Determination of Ochratoxin A in animal feed by immunoaffinity column clean-up and High Performance Liquid Chromatography with fluorescence detection |
17/30358420 DC : 0 | BS ISO 22146 - CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
BIS IS/ISO 105-E16 : 2006 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E16: COLOUR FASTNESS TO WATER SPOTTING ON UPHOLSTERY FABRICS |
BS EN 2434-002:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish High chemical resistance |
05/30130615 DC : DRAFT MAR 2005 | EN ISO 17375 - ANIMAL FEEDING STUFFS - DETERMINATION OF AFLATOXIN B1 |
DIN EN ISO 17071:2011-12 | Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006) |
BS EN ISO 12966-2:2017 | Animal and vegetable fats and oils. Gas chromatography of fatty acid methyl esters Preparation of methyl esters of fatty acids |
17/30356304 DC : 0 | BS ISO 21160 - CIGARETTES - DETERMINATION OF SELECTED CARBONYLS IN THE MAINSTREAM SMOKE OF CIGARETTES - METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
BS ISO 16265 : 2009 | WATER QUALITY - DETERMINATION OF THE METHYLENE BLUE ACTIVE SUBSTANCES (MBAS) INDEX - METHOD USING CONTINUOUS FLOW ANALYSIS (CFA) |
BS 3900-K5(2008) : 2008 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 5: CALCULATION OF THE TOLYLFLUANID AND DICHLOFLUANID RELEASE RATE BY DETERMINATION OF THE CONCENTRATION OF DIMETHYLTOLYLSULFAMIDE (DMST) AND DIMETHYLPHENYLSULFAMIDE (DMSA) IN THE EXTRACT |
BS ISO 15923-1:2013 | Water quality. Determination of selected parameters by discrete analysis systems Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection |
12/30247457 DC : 0 | BS EN ISO 17304 - DENTISTRY - POLYMERISATION SHRINKAGE: METHOD FOR DETERMINATION OF POLYMERISATION SHRINKAGE OF POLYMER-BASED RESTORATIVE MATERIALS |
ISO 16560:2015 | Surface active agents Determination of polyethylene glycol content in nonionic ethoxylated surfactants HPLC method |
UNE-EN 16070:2015 | Products used for treatment of water intended for human consumption - Natural zeolite |
UNE-EN ISO 5667-15:2010 | Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009) |
BIS IS 16166 : 2014 | SAMPLE PREPARATION FOR MEASUREMENT OF MERCURY LEVEL IN FLUORESCENT LAMPS |
11/30253307 DC : 0 | BS ISO 6588-2 - PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 2: HOT EXTRACTION |
07/30158024 DC : 0 | BS EN ISO 8799 AMD1 - SURFACE ACTIVE AGENTS - SULFATED ETHOXYLATED ALCOHOLS AND ALKYLPHENOLS - DETERMINATION OF CONTENT OF UNSULFATED MATTER |
UNI EN ISO 15091 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF ELECTRICAL CONDUCTIVITY AND RESISTANCE |
BS ISO 6588-1:2012 | Paper, board and pulps. Determination of pH of aqueous extracts Cold extraction |
DIN EN 15751:2014-06 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
BS ISO 14502-2:2005 | Determination of substances characteristic of green and black tea Content of catechins in green tea. Method using high-performance liquid chromatography |
BS 6782-14.4(2000) : 2000 AMD 10886 | BINDERS FOR PAINTS AND VARNISHES - PART 14 - METHODS OF TEST FOR ALKYD RESINS - SECTION 14.4 - DETERMINATION OF FATTY ACID CONTENT |
03/307374 DC : DRAFT MAY 2003 | EN 49-2 - WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST ANOBIUM PUNCTATUM (DE GEER) BY EGG-LAYING AND LARVAL SURVIVAL - PART 2: APPLICATION BY IMPREGNATION (LABORATORY METHOD) |
BS ISO 21340:2017 | Test methods for fibrous activated carbon |
BS EN 16421:2014 | Influence of materials on water for human consumption. Enhancement of microbial growth (EMG) |
ISO 7206-9:1994 | Implants for surgery Partial and total hip joint prostheses Part 9: Determination of resistance to torque of head fixation of stemmed femoral components |
I.S. EN ISO 29022:2013 | DENTISTRY - ADHESION - NOTCHED-EDGE SHEAR BOND STRENGTH TEST (ISO 29022:2013) |
01/564180 DC : DRAFT OCT 2001 | BS EN 14254 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - SINGLE-USE RECEPTACLES FOR THE COLLECTION OF SPECIMENS, OTHER THAN BLOOD, FROM HUMANS |
12/30263890 DC : 0 | BS EN 12945 - LIMING MATERIALS - DETERMINATION OF NEUTRALIZING VALUE - TITRIMETRIC METHODS |
BS ISO 22682:2017 | Iron ores. Determination of trace elements. Plasma spectrometric method |
14/30263397 DC : 0 | BS EN ISO 22674 - DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES |
13/30276249 DC : 0 | BS EN 16320 - FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
BS 5766-19:2000 | Methods for analysis of animal feeding stuffs Determination of starch content. Polarimetric method |
BS EN ISO 11731:2017 | Water quality. Enumeration of Legionella |
04/30107827 DC : DRAFT JAN 2004 | ISO 17925 - ZINC AND/OR ALUMINIUM BASED COATINGS ON STEEL - DETERMINATION OF MASS PER UNIT AREA AND CHEMICAL COMPOSITION - GRAVIMETRY, INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY AND FLAME ATOMIC ABSORPTION SPECTROMETRY |
ISO 17678:2010 | Milk and milk products Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) |
14/30276360 DC : 0 | BS ISO 4939 - STEEL AND CAST IRON - DETERMINATION OF NICKEL CONTENT - DIMETHYLGLYOXIME SPECTROPHOTOMETRIC METHOD |
BS ISO 19250 : 2010 | |
BS EN 4503:2013 | Aerospace series. Non-metallic materials. Textiles. Test method. Determination of water soluble chloride and sulfate of aqueous extracts |
IP 615 : 2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
UNI EN ISO 17852 : 2008 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC FLUORESCENCE SPECTROMETRY |
09/30198874 DC : DRAFT SEP 2009 | BS ISO 12830 - PAPER, BOARD AND PULPS - DETERMINATION OF ACID-SOLUBLE MAGNESIUM, CALCIUM, MANGANESE, IRON, COPPER, SODIUM AND POTASSIUM |
BS EN 16711-1:2015 | Textiles. Determination of metal content Determination of metals using microwave digestion |
UNI CEN ISO/TS 21268-1 : 2010 | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 1: BATCH TEST USING A LIQUID TO SOLID RATIO OF 2 L/KG DRY MATTER |
ISO 13536:1995 | Soil quality — Determination of the potential cation exchange capacity and exchangeable cations using barium chloride solution buffered at pH = 8,1 |
ISO 15202-3:2004 | Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Analysis |
BS EN ISO 16960:2014 | Natural gas. Determination of sulfur compounds. Determination of total sulfur by oxidative microcoulometry method |
BS ISO 8096:2005 | Rubber- or plastics-coated fabrics for water resistant clothing. Specification |
03/313978 DC : DRAFT NOV 2003 | EN 1205 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM ACID PYROPHOSPHATE |
PD CEN/TR 10362:2014 | Chemical analysis of ferrous materials. Determination of selenium in steels. Electrothermal atomic absorption spectrometric method |
14/30286323 DC : 0 | BS ISO 18611-2 - SHIPS AND MARINE TECHNOLOGY - MARINE NOX REDUCTION AGENT AUS 40 - PART 2: TEST METHODS |
DIN ISO 13165-1:2015-11 | WATER QUALITY - RADIUM-226 - PART 1: TEST METHOD USING LIQUID SCINTILLATION COUNTING (ISO 13165-1:2013) |
03/309344 DC : DRAFT JUNE 2003 | ISO 1830 - PAPER, BOARD AND PULPS - DETERMINATION OF MANGANESE |
BS 7651(1993) : 1993 AMD 9230 | SPECIFICATION FOR DENTAL POLYMER-BASED CROWN AND BRIDGE MATERIALS |
DIN EN ISO 17230:2011-12 | Leather - Physical and mechanical tests - Determination of water penetration pressure (ISO 17230:2006) |
09/30203552 DC : 0 | BS ISO 17234-2 - LEATHER - CHEMICAL TESTS FOR THE DETERMINATION OF CERTAIN AZO COLORANTS IN DYED LEATHERS - PART 2: DETERMINATION OF 4-AMINOAZOBENZENE |
BS EN 16277:2012 | Animal feeding stuffs. Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65% nitric acid and 30% hydrogen peroxide) |
BS ISO 17318:2015 | Fertilizers and soil conditioners. Determination of arsenic, cadmium, chromium, lead and mercury contents |
04/30088803 DC : DRAFT APR 2004 | ISO 18369-4 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 4: PHYSICOCHEMICAL PROPERTIES OF CONTACT LENS MATERIALS |
06/30136455 DC : 0 | ISO 7302 - CEREALS AND CEREAL PRODUCTS - DETERMINATION OF TOTAL FAT CONTENT |
11/30217696 DC : 0 | BS ISO 23317 - IMPLANTS FOR SURGERY - IN VITRO EVALUATION FOR APATITE-FORMING ABILITY OF IMPLANT MATERIALS |
18/30363780 DC | BS ISO 8124-11. Safety of toys Part 11. Chemical toys (sets) other than experimental sets |
BS 2000-292(2009) : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS |
17/30304046 DC : DRAFT SEP 2017 | BS ISO 19822 - FERTILIZERS AND SOIL CONDITIONERS - DETERMINATION OF HUMIC AND HYDROPHOBIC FULVIC ACIDS CONCENTRATIONS IN FERTILIZER MATERIALS |
BS ISO 5794-1:2010 | Rubber compounding ingredients. Silica, precipitated, hydrated Non-rubber tests |
BS ISO 18089:2015 | Corrosion of metals and alloys. Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control |
DIN EN 15041:2014-06 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - POLYPHOSPHATES |
BS ISO 11846 : 1995 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF SOLUTION HEAT-TREATABLE ALUMINIUM ALLOYS |
15/30293526 DC : 0 | BS EN ISO 14362-1 - TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 1: DETECTION OF THE USE OF CETAIN AZO COLORANTS ACCESSIBLE WITH AND WITHOUT EXTRACTING THE FIBRES |
04/30125026 DC : DRAFT NOV 2004 | EN 15086 - FOODSTUFFS - DETERMINATION OF ISOMALT, LACTITOL, MANNITOL, SORBITOL AND XYLITOL IN FOODSTUFFS |
NF ISO 12914 : 2012 | SOIL QUALITY - MICROWAVE-ASSISTED EXTRACTION OF THE AQUA REGIA SOLUBLE FRACTION FOR THE DETERMINATION OF ELEMENTS |
BS 7079-B2(1992) : 1992 AMD 10591 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - METHODS FOR DETERMINATION OF CHLORIDES ON CLEAN SURFACES |
12/30257901 DC : 0 | BS EN 898 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN CARBONATE |
DIN EN 15647:2009-04 | SURFACE ACTIVE AGENTS - DETERMINATION OF THE DISPERSING EFFECT OF SURFACTANTS ON POWDER |
13/30272442 DC : 0 | BS EN 16620 - FOOD ANALYSIS - DETERMINATION OF FURAN IN COFFEE AND COFFEE PRODUCTS |
DIN EN ISO 16265:2012-05 | Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA) (ISO 16265:2009) |
UNE-EN ISO 17071:2011 | Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006) |
03/300548 DC : DRAFT FEB 2003 | EN 12902 - PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - INORGANIC SUPPORTING AND FILTERING MATERIALS - METHODS OF TEST |
BS ISO 11813:2010 | Milk and milk products. Determination of zinc content. Flame atomic absorption spectrometric method |
DIN EN 15451:2008-11 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY EDDHSA BY ION PAIR CHROMATOGRAPHY |
06/30146090 DC : DRAFT FEB 2006 | ISO 5529 - WHEAT - DETERMINATION OF SEDIMENTATION INDEX - ZELENY TEST |
13/30277131 DC : 0 | BS EN 16319 - FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
10/30231811 DC : DRAFT SEP 2010 | BS EN 1245 - ADHESIVES - DETERMINATION OF PH |
BS 2000-291(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMEN EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
10/30231808 DC : 0 | BS EN 1243 - ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
07/30164013 DC : 0 | BS ISO 14703 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - SAMPLE PREPARATION FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF CERAMIC POWDERS |
DIN EN 16070:2014-06 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - NATURAL ZEOLITE |
I.S. EN ISO 12782-5:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 5: EXTRACTION OF HUMIC SUBSTANCES FROM AQUEOUS SAMPLES (ISO 12782-5:2012) |
04/30098890 DC : DRAFT JUL 2004 | ISO 17852 - WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC FLUORESCENCE SPECTROMETRY |
DIN ISO 20370:2012-10 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content (ISO 20370:2009) |
BS ISO 18857-2 : 2009 | WATER QUALITY - DETERMINATION OF SELECTED ALKYLPHENOLS - PART 2: GAS CHROMATOGRAPHIC-MASS SPECTROMETRIC DETERMINATION OF ALKYLPHENOLS, THEIR ETHOXYLATES AND BISPHENOL A IN NON-FILTERED SAMPLES FOLLOWING SOLID-PHASE EXTRACTION AND DERIVATISATION |
00/562031 DC : DRAFT MAY 2000 | ISO 17190-7 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 7: GRAVIMETRIC DETERMINATION OF ABSORPTION UNDER PRESSURE |
ISO 11535:2006 | Iron ores Determination of various elements Inductively coupled plasma atomic emission spectrometric method |
ISO 8787:1986 | Paper and board — Determination of capillary rise — Klemm method |
DIN EN ISO 22032:2009-07 | WATER QUALITY - DETERMINATION OF SELECTED POLYBROMINATED DIPHENYL ETHERS IN SEDIMENT AND SEWAGE SLUDGE - METHOD USING EXTRACTION AND GAS CHROMATOGRAPHY/MASS SPECTROMETRY |
10/30202152 DC : 0 | BS ISO 11916-2 - SOIL QUALITY - DETERMINATION OF SELECTED EXPLOSIVE COMPOUNDS - PART 2: METHOD USING GAS CHROMATOGRAPHY (GC) WITH ELECTRON CAPTURE DETECTION (ECD) OR MASS SPECTROMETRIC DETECTION (MS) |
17/30339698 DC : 0 | BS ISO 20950-1 - WATER QUALITY - DETERMINATION OF AVAILABLE WEAK AND DISSOCIABLE (WAD) CYANIDE - PART 1: METHOD USING LIGAND EXCHANGE, FLOW INJECTION ANALYSIS (FIA), GAS-DIFFUSION AND AMPEROMETRIC DETECTION |
DD CEN ISO/TS 17764-1:2006 | Animal feeding stuffs. Determination of the content of fatty acids Preparation of methyl esters |
08/30182461 DC : DRAFT JUNE 2008 | BS ISO 20369 - MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF CITRATE CONTENT |
ISO 3856-6:1984 | Paints and varnishes — Determination of "soluble" metal content — Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectrometric method |
UNE-EN 15705:2010 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
09/30075204 DC : 0 | BS EN ISO 10271 - DENTAL METALLIC MATERIALS - CORROSION TEST METHODS |
11/30242687 DC : DRAFT APR 2011 | BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS IN PETROL - GAS CHROMATOGRAPHIC METHOD |
S.R. CEN/TS 16188:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ELEMENTS IN AQUA REGIA AND NITRIC ACID DIGESTS - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
17/30347657 DC : 0 | BS ISO 18256-1 - NUCLEAR FUEL TECHNOLOGY - DISSOLUTION OF PLUTONIUM DIOXIDE-CONTAINING MATERIALS - PART 1: DISSOLUTION OF PLUTONIUM DIOXIDE POWDERS |
17/30343024 DC : 0 | BS ISO 16266-2 - WATER QUALITY - DETECTION AND ENUMERATION OF PSEUDOMONAS AERUGINOSA - PART 2: MOST PROBABLE NUMBER METHOD |
06/30145857 DC : DRAFT FEB 2006 | ISO 11535 - IRON ORES - DETERMINATION OF VARIOUS ELEMENTS - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
BS ISO 17942:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of boron nitride powders |
15/30287666 DC : 0 | BS ISO 17951-1 - WATER QUALITY - DETERMINATION OF FLUORIDE USING FLOW ANALYSIS (FIA AND CFA) - PART 1: METHOD USING FLOW INJECTION ANALYSIS (FIA) AND SPECTROMETRIC DETECTION AFTER OFF-LINE DISTILLATION |
BS ISO 18611-1:2014 | Ships and marine technology. Marine NOx reduction agent AUS 40 Quality requirements |
BS 2000-521(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
13/30277086 DC : 0 | BS EN 839 - WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST WOOD DESTROYING BASIDIOMYCETES - APPLICATION BY SURFACE TREATMENT |
ISO 6486-2:1999 | Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food — Release of lead and cadmium — Part 2: Permissible limits |
BS ISO 15819:2014 | Cosmetics. Analytical methods. Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS |
BS ISO 11271:2002 | Soil quality. Determination of redox potential. Field method |
BS EN 62321:2009 | Electrotechnical products. Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
13/30276853 DC : 0 | BS EN 16318 - FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CHROMIUM (6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
12/30273167 DC : 0 | BS EN 16187 - FOODSTUFFS - DETERMINATION OF FUMONISIN B1 AND FUMONISIN B2 IN PROCESSED MAIZE CONTAINING FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION AFTER PRECOLUMN DERIVATIZATION |
DIN EN 15782:2009-11 | Animal feeding stuffs - Determination of nicarbazin - High-performance liquid chromatographic method |
17/30349843 DC : 0 | BS EN ISO 11704 - WATER QUALITY - GROSS ALPHA AND GROSS BETA ACTIVITY - TEST METHOD USING LIQUID SCINTILLATION COUNTING |
15/30315952 DC : 0 | BS EN 71-12 - SAFETY OF TOYS - PART 12: N-NITROSAMINES AND N-NITROSATABLE SUBSTANCES |
DIN EN 15781:2009-11 | Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation |
BS ISO 19563:2017 | Determination of theanine in tea and instant tea in solid form using high-performance liquid chromatography |
I.S. EN 4170:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR MEASUREMENT OF RESISTANCE TO COLD CRACK TEMPERATURE CYCLE |
BS EN 15649-1 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
16/30328237 DC : 0 | BS ISO 22682 - IRON ORES - DETERMINATION OF TRACE ELEMENTS - PLASMA SPECTROMETRIC METHOD |
BS 2000-182(2005) : 2005 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 182: DETERMINATION OF INORGANIC ACIDITY OF PETROLEUM PRODUCTS - COLOUR INDICATOR TITRATION METHOD |
06/30147345 DC : DRAFT MAR 2006 | EN 15484 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD |
11/30217717 DC : 0 | BS EN ISO 15091 - PAINTS AND VARNISHES - DETERMINATION OF THE ELECTRICAL CONDUCTIVITY AND THE SPECIFIC ELECTRICAL RESISTIVITY |
10/30199314 DC : DRAFT DEC 2010 | BS EN ISO 12782-5 - SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIFICATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 5: EXTRACTION OF HUMIC SUBSTANCES FROM AQUEOUS SAMPLES |
BS ISO 18385:2016 | Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes. Requirements |
BS 6068-4.11(1996) : 1996 AMD 13446 | WATER QUALITY - MICROBIOLOGICAL METHODS - DETECTION AND EMUMERATION OF BATERIOPHAGES - ENUMERATION OF F-SPECIFIC RNA BATERIOPHAGES |
DIN EN ISO 27108:2013-12 | Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 27108:2010) |
ISO 7238:2004 | Butter Determination of pH of the serum Potentiometric method |
12/30258197 DC : 0 | BS EN 12125 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM THIOSULFATE |
UNE-EN 16128:2016 | Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release |
UNE-EN 15408:2011 | Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
DD CEN/TS 15561:2007 | Fertilizers. Determination of total nitrogen in calcium cyanamide containing nitrates |
10/30216666 DC : 0 | BS EN 16087-1 - SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF THE AEROBIC BIOLOGICAL ACTIVITY - PART 1: OXYGEN UPTAKE RATE (OUR) |
00/560909 DC : DRAFT MAR 2000 | BS ISO 8871-2 - ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION |
BS ISO 18070:2015 | Corrosion of metals and alloys. Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel |
05/30136958 DC : DRAFT JULY 2005 | EN ISO 3960 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PEROXIDE VALUE |
BS EN 60754-1:2014 | Test on gases evolved during combustion of materials from cables Determination of the halogen acid gas content |
17/30346852 DC : 0 | BS ISO 21575 - OPTICS AND PHOTONICS - OPTICAL MATERIALS AND COMPONENTS - THE POWDER TEST METHOD FOR THE WATER RESISTANCE OF OPTICAL GLASS |
12/30242163 DC : 0 | BS ISO 16729 - SOIL QUALITY - DIGESTION OF NITRIC ACID SOLUBLE FRACTIONS OF ELEMENTS |
16/30303345 DC : DRAFT JAN 2016 | BS ISO 19724 - GASOLINE ENGINES WITH DIRECT INJECTION - CLEANLINESS ASSESSMENT OF FUEL INJECTION EQUIPMENT |
BS EN ISO 15351:2010 | Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
09/30205119 DC : 0 | BS EN 14397-1 - FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CARBON DIOXIDE - PART 1: METHOD FOR SOLID FERTILIZERS |
BS ISO 1830:2005 | Paper, board and pulps. Determination of acid-soluble manganese |
14/30314626 DC : 0 | BS EN ISO 4629-1 - BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF HYDROXYL VALUE - TITRIMETRIC METHOD - PART 1: TITRIMETRIC METHOD WITHOUT USING A CATALYST |
NF ISO 16424 : 2014 | NUCLEAR ENERGY - EVALUATION OF HOMOGENEITY OF GD DISTRIBUTION WITHIN GADOLINIUM FUEL BLENDS AND DETERMINATION OF GD[2]O[3] CONTENT IN GADOLINIUM FUEL PELLETS BY MEASUREMENTS OF URANIUM AND GADOLINIUM ELEMENTS |
BS ISO 10416 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
BS 6068-2.64(1998) : 1998 | WATER QUALITY - DETERMINATION OF BIOCHEMICAL OXYGEN DEMAND AFTER N DAYS (BODN) - PART 2: METHOD FOR UNDILUTED SAMPLES |
BS ISO 15238:2016 | Solid mineral fuels. Determination of total cadmium content of coal |
DIN ISO 13357-2:2008-09 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OILS |
BS EN 62554 : 2011 | SAMPLE PREPARATION FOR MEASUREMENT OF MERCURY LEVEL IN FLUORESCENT LAMPS |
I.S. EN ISO 16960:2014 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS - DETERMINATION OF TOTAL SULFUR BY OXIDATIVE MICROCOULOMETRY METHOD (ISO 16960:2014) |
08/30154538 DC : DRAFT MAY 2008 | BS ISO 18857-2 - WATER QUALITY - DETERMINATION OF SELECTED ALKYLPHENOLS - PART 2: DETERMINATION OF ALKYLPHENOLS, ALKYLPHENOL ETHOXYLATES AND BISPHENOL A - METHOD FOR NON-FILTERED SAMPLES USING SOLID-PHASE EXTRACTION AND GAS CHROMATOGRAPHY WITH MASS SELECTIVE DETECTION AFTER DERIVATION |
UNE-EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
BS EN 15476:2009 | Fertilizers. Determination of nitric and ammoniacal nitrogen according to Devarda |
15/30328772 DC : 0 | BS EN 13254 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR THE USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
08/30179332 DC : DRAFT JUNE 2008 | BS EN 15604 - FERTILIZERS - DETERMINATION OF DIFFERENT FORMS OF NITROGEN IN THE SAME SAMPLE, CONTAINING NITROGEN AS NITRIC, AMMONIACAL, UREA AND CYANAMIDE NITROGEN |
UNI EN ISO 17380 : 2013 | SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE AND EASILY LIBERATABLE CYANIDE - CONTINUOUS-FLOW ANALYSIS METHOD |
UNI EN ISO 11206 : 2013 | WATER QUALITY - DETERMINATION OF DISSOLVED BROMATE - METHOD USING ION CHROMATOGRAPHY (IC) AND POST COLUMN REACTION (PCR) |
02/124189 DC : DRAFT NOV 2002 | BS ISO 8502-11 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 11: FIELD METHOD FOR THE TURBIDIMETRIC DETERMINATION OF WATER-SOLUBLE SULFATE |
BS EN ISO 16373-2:2014 | Textiles. Dyestuffs General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water) |
BS EN ISO 5402-2:2015 | Leather. Determination of flex resistance Vamp flex method |
UNE-EN 14397-1:2010 | Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers |
BIS IS 16197-4 : 2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 4: MERCURY IN POLYMERS, METALS AND ELECTRONICS BY CV-AAS, CV-AFS, ICP-OES AND ICP-MS |
10/30197566 DC : 0 | BS ISO 7203-1 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 1: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR TOP APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
BS EN 16144:2012 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method |
07/30169175 DC : 0 | BS ISO 28706-5 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 5: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION IN CLOSED SYSTEMS |
12/30257898 DC : 0 | BS EN 896 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROXIDE |
BS 5766-22:2001 | Methods for analysis of animal feeding stuffs Determination of residues of organochlorine pesticides. Gas chromatographic method |
UNE-EN ISO 6271:2016 | Clear liquids - Estimation of colour by the platinum-cobalt colour scale (ISO 6271:2015) |
DIN 10377:2003-10 | TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF PRESERVING AGENTS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
BS ISO 24293:2009 | Water quality. Determination of individual isomers of nonylphenol. Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS) |
BS 2000-439(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCT - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD |
07/30161625 DC : 0 | BS EN 15647 - SURFACE ACTIVE AGENTS - DETERMINATION OF THE DISPERSING EFFECT OF SURFACTANTS ON POWDER |
DIN EN 16086-2:2012-01 | Soil improvers and growing media - Determination of plant response - Part 2: Petri dish test using cress |
BS 2000-131(1998) : 1998 | PETROLEUM PRODUCTS - GUM CONTENT OF LIGHT AND MIDDLE DISTILLATE FUELS - JET EVAPORATION METHOD |
14/30279905 DC : 0 | BS EN ISO 17294-2 - WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 2: DETERMINATION OF SELECTED ELEMENTS INCLUDING URANIUM ISOTOPES |
BS 2000-563(2011) : 2011 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
BS 2000-270(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF LEAD CONTENT OF GASOLINE - IODINE MONOCHLORIDE METHOD |
BS EN ISO 17231:2017 | Leather. Physical and mechanical tests. Determination of water repellency of garment leather |
BS EN ISO 9073-16:2008 | Textiles. Test methods for nonwovens Determination of resistance to penetration by water (hydrostatic pressure) |
BS 6200-3.40.4:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of cobalt content |
I.S. EN 16993:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
BS EN 16651:2015 | Fertilizers. Determination of N-(n-Butyl)thiophosphoric acid triamide (NBPT) and N-(n-Propyl)thiophosphoric acid triamide (NPPT). Method using high-performance liquid chromatography (HPLC) |
UNI EN ISO 12846 : 2013 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY (AAS) WITH AND WITHOUT ENRICHMENT |
NF EN ISO 28706-5 : 2011 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 5: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION IN CLOSED SYSTEMS |
BS 7079-E9(1994) : 1994 AMD 9728 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METALLIC BLAST CLEANING ABRASIVES - METHOD FOR DETERMINATION OF APPARENT DENSITY |
BS 6068-4.6(1989) : 1989 | WATER QUALITY - MICROBIOLOGICAL METHODS - DETECTION AND ENUMERATION OF PSEUDOMONAS AERUGINOSA BY ENRICHMENT IN LIQUID MEDIUM |
BS EN ISO 15234:2010 | Paints and varnishes. Testing of formaldehyde-emitting coatings and melamine foams. Determination of the steady-state concentration of formaldehyde in a small test chamber |
BS ISO 20369:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of citrate content |
DIN EN ISO 16784-2:2008-07 | Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO 16784-2:2006) |
BS ISO 20289:2018 | Surface chemical analysis. Total reflection X-ray fluorescence analysis of water |
BS ISO 10704 : 2009 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD |
07/30148164 DC : DRAFT AUG 2007 | BS ISO 5764 - MILK - DETERMINATION OF FREEZING POINT - THERMISTOR CRYOSCOPE METHOD (REFERENCE METHOD) |
15/30309789 DC : 0 | BS EN ISO 13078-2 - DENTISTRY - DENTAL FURNACE - PART 2: TEST METHOD FOR EVALUATION OF FURNACE PROGRAMME VIA FIRING GLAZE |
BS EN 50414:2006 | Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables. Method A: Total lead content determination with flame excitation atomic absorption spectrometry. Method B: Qualitative analysis of lead by lead sulphide staining |
BS 684-2.18(1995) : 1995 AMD 10897 | METHODS OF ANALYSIS OF FATS AND FATTY OILS - OTHER METHODS - DETERMINATION OF COPPER, IRON AND NICKEL CONTENTS - GRAPHITE FURNACE ATOMIC ABSORPTION METHOD |
DD ENV 839:2002 | Wood preservatives. Determination of the protective effectiveness against wood destroying basidiomycetes. Application by surface treatment |
BS EN ISO 12966-4:2015 | Animal and vegetable fats and oils. Gas chromatography of fatty acid methyl esters Determination by capillary gas chromatography |
BS 2000-571(2013) : 2013 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
17/30332217 DC : 0 | BS EN ISO 28158 - DENTISTRY - INTEGRATED DENTAL FLOSS AND HANDLES |
BS 5202-19:1998 | Methods for chemical analysis of tobacco and tobacco products Determination of water content (Karl Fischer method) |
BS EN ISO 17730:2014 | Dentistry. Fluoride varnishes |
DIN EN 16618:2015-06 | FOOD ANALYSIS - DETERMINATION OF ACRYLAMIDE IN FOOD BY LIQUID CHROMATOGRAPHY TANDEM MASS SPECTROMETRY (LC-ESI-MS/MS) |
S.R. CEN/TS 12404:2015 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - ASSESSMENT OF THE EFFECTIVENESS OF A MASONRY FUNGICIDE TO PREVENT GROWTH INTO WOOD OF DRY ROT SERPULA LACRYMANS (SCHUMACHER EX FRIES) S.F. GRAY - LABORATORY METHOD |
17/30357267 DC : 0 | BS EN 17093 - DOMESTIC APPLIANCES USED FOR DRINKING WATER TREATMENT NOT CONNECTED TO WATER SUPPLY - JUG WATER FILTER SYSTEMS - SAFETY AND PERFORMANCE REQUIREMENTS, LABELING AND INFORMATION TO BE SUPPLIED |
BS 6815-1(1993) : 1993 AMD 8632 | DENTAL ROOT CANAL INSTRUMENTS - SPECIFICATION FOR FILES, REAMERS, BARBED BROACHES, RASPS, PASTE CARRIERS, EXPLORERS & COTTON BROACHES |
BS ISO 19730:2008 | Soil quality. Extraction of trace elements from soil using ammonium nitrate solution |
10/30216579 DC : 0 | BS EN 15492 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
ONORM EN ISO 7783 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011) |
PREN 12868 : DRAFT 2015 | CHILD USE AND CARE ARTICLES - METHODS FOR DETERMINING THE RELEASE OF N-NITROSAMINES AND N-NITROSATABLE SUBSTANCES FROM ELASTOMER OR RUBBER TEATS AND SOOTHERS |
PREN 13252 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS |
07/30174246 DC : 0 | BS EN ISO 15304 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CISTRANS, SATURATED, MONO- AND POLYUNSATURATED FATTY ACIDS IN VEGETABLE OR NON-RUMINANT OILS AND FATS - CAPILLARY GAS CHROMATOGRAPHIC METHOD |
05/30116667 DC : DRAFT MAR 2005 | BS ISO 2597-1 - IRON ORES - DETERMINATION OF TOTAL IRON CONTENT - PART 1: TITRIMETRIC METHOD AFTER TIN(2) CHLORIDE REDUCTION |
BS EN 15492:2012 | Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method |
BS EN ISO 12228-1:2014 | Determination of individual and total sterols contents. Gas chromatographic method Animal and vegetable fats and oils |
BS ISO 12739:2006 | Zinc sulfide concentrates. Determination of zinc. Ion-exchange/EDTA titrimetric method |
UNI EN ISO 5814 : 2013 | WATER QUALITY - DETERMINATION OF DISSOLVED OXYGEN - ELECTROCHEMICAL PROBE METHOD |
17/30360623 DC : 0 | BS EN ISO 17072-2 - LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
EN 62321-7-2:2017 | Determination of certain substances in electrotechnical products - Part 7-2: Hexavalent chromium - Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method |
UNI EN 16277 : 2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF MERCURY BY COLD-VAPOUR ATOMIC ABSORPTION SPECTROMETRY (CVAAS) AFTER MICROWAVE PRESSURE DIGESTION (EXTRACTION WITH 65% NITRIC ACID AND 30% HYDROGEN PEROXIDE) |
08/30187770 DC : 0 | BS EN 14132 - FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN BARLEY AND ROASTED COFFEE - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEAN-UP |
17/30344544 DC : 0 | BS EN ISO 2812-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD |
ISO 17072-2:2011 | Leather Chemical determination of metal content Part 2: Total metal content |
BS ISO 22875:2017 | Nuclear energy. Determination of chlorine and fluorine in uranium dioxide powder and sintered pellets |
PREN 13250 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS |
UNI EN ISO 15181-5 : 2008 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 5: CALCULATION OF THE TOLYLFLUANID AND DICHLOFLUANID RELEASE RATE BY DETERMINATION OF THE CONCENTRATION OF DIMETHYLTOLYLSULFAMIDE (DMST) AND DIMETHYLPHENYLSULFAMIDE (DMSA) IN THE EXTRACT |
BS 3900-B8:1986 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Determination of \'soluble\' barium content |
BS 6068-4.15(2002) : 2002 | WATER QUALITY - DETECTION AND ENUMERATION OF PSEUDOMONAS AERUGINOSA BY MEMBRANE FILTRATION |
BS ISO 14242-1 : 2014 | IMPLANTS FOR SURGERY - WEAR OF TOTAL HIP-JOINT PROSTHESES - PART 1: LOADING AND DISPLACEMENT PARAMETERS FOR WEAR-TESTING MACHINES AND CORRESPONDING ENVIRONMENTAL CONDITIONS FOR TEST |
I.S. EN ISO 28158:2010 | DENTISTRY - INTEGRATED DENTAL FLOSS AND HANDLES |
UNI EN ISO 21563 : 2013 | DENTISTRY - HYDROCOLLOID IMPRESSION MATERIALS |
03/313982 DC : DRAFT NOV 2003 | EN 1208 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CALCIUM POLYPHOSPHATE |
ASTM F 2075 : 2015 : REDLINE | Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
09/30198686 DC : 0 | BS EN 46-1 - WOOD PRESERVATIVES - DETERMINATION OF THE PREVENTIVE ACTION AGAINST RECENTLY HATCHED LARVAE OF HYLOTRUPES BAJALUS (LINNAEUS) - PART 1: APPLICATION BY SURFACE TREATMENT (LABORATORY METHOD) |
08/30179021 DC : DRAFT MAR 2008 | BS EN ISO 27587 - LEATHER - CHEMICAL TESTS - DETERMINATION OF THE FREE FORMALDEHYDE IN PROCESS AUXILIARIES |
BS ISO 16428:2005 | Implants for surgery. Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices |
BS ISO 16588 : 2002 AMD 14910 | WATER QUALITY - DETERMINATION OF SIX COMPLEXING AGENTS - GAS-CHROMATOGRAPHIC METHOD |
BS ISO 18589-5:2009 | Measurement of radioactivity in the environment. Soil Measurement of strontium 90 |
UNE-EN ISO 16373-3:2015 | Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) (ISO 16373-3:2014) |
97/561456 DC : DRAFT APR 1997 | BS 6068 WATER QUALITY - PART 4: MICROBIOLOGICAL METHODS - NEW SECTION: DETECTION AND ENUMERATION OF PSEUDOMONAS AERUGINOSA IN BOTTLED WATER |
BIS IS 16036 : 2012 | GREEN COFFEE - PREPARATION OF SAMPLES FOR USE IN SENSORY ANALYSIS |
BS EN 4170:2007 | Aerospace series. Paints and varnishes. Test method for measurement of resistance to cold crack temperature cycle |
BIS IS 1448-9 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 9: DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
BS 6068-4.17(2001) : 2001 | WATER QUALITY - DETECTION AND ENUMERATION OF BACTERIOPHAGES - PART 4: ENUMERATION OF BACTERIOPHAGES INFECTING BACTERIODES FRAGILIS |
12/30266243 DC : 0 | BS ISO 10362-2 - CIGARETTES - DETERMINATION OF WATER IN SMOKE CONDENSATES - PART 2: KARL FISCHER METHOD |
BS 6068-2.89(2003) : 2003 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 2: DETERMINATION OF 62 ELEMENTS |
BS ISO 14897:2002 | Plastics. Polyols for use in the production of polyurethane. Determination of water content |
BS ISO 9073-12:2002 | Textiles. Test methods for nonwovens Demand absorbency |
AAMI ID26 : 2004 : R2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
ISO 17378-1:2014 | Water quality — Determination of arsenic and antimony — Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS) |
09/30195609 DC : DRAFT JAN 2009 | BS EN 15890 - FOODSTUFFS - DETERMINATION OF PATULIN IN FRUIT JUICE AND FRUIT BASED PUREE FOR YOUNG CHILDREN - HPLC METHOD WITH LIQUID/LIQUID PARTITION CLEANUP AND SOLID PHASE EXTRACTION AND UV DETECTION |
BS 6068-2.87(2003) : 2003 | WATER QUALITY - DETERMINATION OF ORTHOPHOSPHATE AND TOTAL PHOSPHORUS CONTENTS BY FLOW ANALYSIS (FIA AND CFA) - PART 2: METHOD BY CONTINUOUS FLOW ANALYSIS (CFA) |
UNE-EN 15909:2011 | Fertilizers - Determination of calcium and formate in calcium foliar fertilizers |
PD ISO/TR 14569-1:2007 | Dental materials. Guidance on testing of wear Wear by toothbrushing |
BS EN 14832:2005 | Petroleum and related products. Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
BS 3900-B10:1986 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Determination of hexavalent chromium content of solid matter |
UNE-EN 15890:2011 | Foodstuffs - Determination of patulin in fruit juice and fruit based purée for infants and young children - HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection |
05/30116671 DC : DRAFT MAR 2005 | BS ISO 13312 - IRON ORES - DETERMINATION OF POTASSIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
UNE-EN ISO 10703:2016 | Water quality - Determination of the activity concentration of radionuclides - Method by high resolution gamma-ray spectrometry (ISO 10703:2007) |
DD ISO/TS 11080:2009 | Dentistry. Essential characteristics of test methods for the evaluation of treatment methods intended to improve or maintain the microbiological quality of dental unit procedural water |
BS ISO 22662:2007 | Milk and milk products. Determination of lactose content by high-performance liquid chromatography (Reference method) |
DIN EN ISO 14719:2012-03 | Chemical analysis of refractory material glass and glazes - Determination of Fe<(hoch)2+> and Fe<(hoch)3+> by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011) |
ONORM EN ISO 17226-2 : 2010 | LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 2: METHOD USING COLORIMETRIC ANALYSIS |
XP ISO/TS 16176 : 2011 XP | RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF THE AGGREGATE-SIZE DISTRIBUTION AT ULTIMATE DISPERSION |
ISO 3987:2010 | Petroleum products — Determination of sulfated ash in lubricating oils and additives |
03/309861 DC : DRAFT AUG 2003 | EN 14664 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) SULFATE, SOLID |
UNI EN 15652 : 2009 | FOODSTUFFS - DETERMINATION OF NIACIN BY HPLC |
UNI EN 14362-3 : 2012 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 3: DETECTION OF THE USE OF CERTAIN AZO COLORANTS, WHICH MAY RELEASE 4-AMINOAZOBENZENE |
DIN EN 10355:2013-11 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
DIN EN 16144:2012-05 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
PREN 2435-3 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 03: HIGH CORROSION AND FLUID RESISTANCE |
DIN EN 16173:2012-11 | SLUDGE, TREATED BIOWASTE AND SOIL - DIGESTION OF NITRIC ACID SOLUBLE FRACTIONS OF ELEMENTS |
ISO 23317:2014 | Implants for surgery — In vitro evaluation for apatite-forming ability of implant materials |
PREN 2435-4 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 04: HIGH CORROSION AND FLUID RESISTANCE WITH SURFACE PREPARATION TOLERANCE |
DIN EN ISO 15181-4:2009-02 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 4: DETERMINATION OF PYRIDINE-TRIPHENYLBORANE (PTPB) CONCENTRATION IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
DIN ISO 10362-2:2015-12 | CIGARETTES - DETERMINATION OF WATER IN SMOKE CONDENSATES - PART 2: KARL FISCHER METHOD (ISO 10362-2:2013) |
ONORM EN 13614 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
ISO 15604:2016 | Fertilizers — Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen |
I.S. EN 1568-2:2018 | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 2: SPECIFICATION FOR HIGH EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
PREN 12606-1 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
I.S. EN 16619:2015 | FOOD ANALYSIS - DETERMINATION OF BENZO[A]PYRENE, BENZ[A]ANTHRACENE, CHRYSENE AND BENZO[B]FLUORANTHENE IN FOODSTUFFS BY GAS CHROMATOGRAPHY MASS SPECTROMETRY (GC-MS) |
DIN ISO 6370-2:2013-08 | Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2011) |
UNI EN 15850 : 2010 | FOODSTUFFS - DETERMINATION OF ZEARALENONE IN MAIZE BASED BABY FOOD, BARLEY FLOUR, MAIZE FLOUR, POLENTA, WHEAT FLOUR AND CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
DIN 10763:2004-06 | Analysis of honey - Determination of glycerol content - Enzymatic method |
DIN EN ISO 18218-2:2015-11 | LEATHER - DETERMINATION OF ETHOXYLATED ALKYLPHENOLS - PART 2: INDIRECT METHOD (ISO 18218-2:2015) |
EN ISO 10545-15:1997 | Ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles (ISO 10545-15:1995) |
UNI EN ISO 20795-1 : 2013 | DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS |
ISO 15814:1999 | Implants for surgery Copolymers and blends based on polylactide In vitro degradation testing |
UNE-EN 15649-1:2010 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
I.S. CEN/TR 15314:2006 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - QUANTITATIVE DETERMINATION OF QUATERNARY AMMONIUM COMPOUNDS IN WOOD |
I.S. EN ISO 16373-3:2014 | TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARCINOGENIC DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) (ISO 16373-3:2014) |
BS EN ISO 2812-4:2017 | Paints and varnishes. Determination of resistance to liquids Spotting methods |
BS 2000-58(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOFTENING POINT - RING AND BALL METHOD |
ISO 5418-2:2006 | Iron ores Determination of copper Part 2: Flame atomic absorption spectrometric method |
ISO 11261:1995 | Soil quality — Determination of total nitrogen — Modified Kjeldahl method |
ISO/TR 17055:2002 | Steel Determination of silicon content Inductively coupled plasma atomic emission spectrometric method |
I.S. EN ISO 17943:2016 | WATER QUALITY - DETERMINATION OF VOLATILE ORGANIC COMPOUNDS IN WATER - METHOD USING HEADSPACE SOLID-PHASE MICRO-EXTRACTION (HS-SPME) FOLLOWED BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) (ISO 17943:2016) |
DIN EN 16278:2012-09 | ANIMAL FEEDING STUFFS - DETERMINATION OF INORGANIC ARSENIC BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HG-AAS) AFTER MICROWAVE EXTRACTION AND SEPARATION BY SOLID PHASE EXTRACTION (SPE) |
PREN 13257 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED DOCUMENTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS |
NF EN ISO 11640 : 2013 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING |
I.S. EN 16866:2017 | METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST) |
IP 498 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
DIN EN ISO 12966-2:2011-05 | ANIMAL AND VEGETABLE FATS AND OILS - GAS CHROMATOGRAPHY OF FATTY ACID METHYL ESTERS - PART 2: PREPARATION OF METHYL ESTERS OF FATTY ACIDS (ISO 12966-2:2017) |
ISO 18385:2016 | Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes — Requirements |
PREN 13253 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS) |
ISO 10705-3:2003 | Water quality — Detection and enumeration of bacteriophages — Part 3: Validation of methods for concentration of bacteriophages from water |
S.R. CEN/TS 16319:2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
UNI EN 15411 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN) |
EN ISO 10873:2010 | Dentistry - Denture adhesives (ISO 10873:2010) |
ISO 2811:1974 | Paints and varnishes — Determination of density |
ISO 17190-5:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 5: Gravimetric determination of free swell capacity in saline solution |
DIN EN ISO 12311:2015-06 | Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15); German version EN ISO 12311:2013 |
I.S. EN 15905:2010 | FERTILIZERS - DETERMINATION OF 3-METHYLPYRAZOLE (MP) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
UNE-EN ISO 7783:2012 | Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011) |
GOST R ISO 13493 : 2005 | MEAT AND MEAT PRODUCTS - METHOD FOR DETERMINATION OF CHLORAMPHENICOL CONTENT USING LIQUID CHROMATOGRAPHY |
UNI EN 15558 : 2009 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO ULSCH |
UNI EN ISO 12782-3 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 3: EXTRACTION OF ALUMINIUM OXIDES AND HYDROXIDES WITH AMMONIUM OXALATE/OXALIC ACID |
EN ISO 17072-1:2011 | Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2011) |
ISO 20950-1:2018 | Water quality — Determination of available weak and dissociable (WAD) cyanide — Part 1: Method using ligand exchange, flow injection analysis (FIA), gas-diffusion and amperometric detection |
I.S. EN 13362:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
ISO 15355:1999 | Steel and iron — Determination of chromium content — Indirect titration method |
DIN EN ISO 17678:2010-06 | MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
ISO 13741-2:1998 | Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 2: Headspace method |
ISO/TS 13899-3:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of W content |
ISO 22875:2017 | Nuclear energy — Determination of chlorine and fluorine in uranium dioxide powder and sintered pellets |
ISO 7624:1997 | Petroleum products and lubricants — Inhibited mineral turbine oils — Determination of oxidation stability |
ISO 16772:2004 | Soil quality — Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry |
ISO/TS 22304:2008 | Tobacco Determination of tobacco specific nitrosamines Method using alkaline dichloromethane extraction |
ISO 4049:2009 | Dentistry Polymer-based restorative materials |
UNI EN 13614 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
NF EN ISO 28706-1 : 2011 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 1: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ACIDS AT ROOM TEMPERATURE |
DIN EN 14944-3:2015-06 (Draft) | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
I.S. EN 15192:2006 | CHARACTERISATION OF WASTE AND SOIL - DETERMINATION OF CHROMIUM(6) IN SOLID MATERIAL BY ALKALINE DIGESTION AND ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION |
I.S. EN 16075:2011 | FERTILIZERS - DETERMINATION OF N-(2-NITROPHENYL)PHOSPHORIC TRIAMIDE (2-NPT) IN UREA AND FERTILIZERS CONTAINING UREA - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
I.S. EN 16037:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN SULFATE |
S.R. CEN ISO/TS 16179:2012 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - DETERMINATION OF ORGANOTIN COMPOUNDS IN FOOTWEAR MATERIALS (ISO/TS 16179:2012) |
I.S. EN ISO 12311:2013 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15) |
I.S. EN ISO 11846:2008 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF SOLUTION HEAT-TREATABLE ALUMINIUM ALLOYS |
I.S. EN 13368-3:2017 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS IN FERTILIZERS BY CHROMATOGRAPHY - PART 3: DETERMINATION OF [S,S]-EDDS BY ION PAIR CHROMATOGRAPHY |
I.S. EN ISO 10693:2014 | SOIL QUALITY - DETERMINATION OF CARBONATE CONTENT - VOLUMETRIC METHOD (ISO 10693:1995) |
I.S. EN ISO 16265:2012 | WATER QUALITY - DETERMINATION OF THE METHYLENE BLUE ACTIVE SUBSTANCES (MBAS) INDEX - METHOD USING CONTINUOUS FLOW ANALYSIS (CFA) (ISO 16265:2009) |
I.S. CEN ISO TS 15883-5:2006 | WASHER-DISINFECTORS - PART 5: TEST SOILS AND METHODS FOR DEMONSTRATING CLEANING EFFICACY |
ISO 10278:1995 | Steel — Determination of manganese content — Inductively coupled plasma atomic emission spectrometric method |
I.S. CEN TS 15451:2006 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY EDDHSA BY ION PAIR CHROMATOGRAPHY |
S.R. CEN/TS 16621:2014 | FOOD ANALYSIS - DETERMINATION OF BENZO[A]PYRENE, BENZ[A]ANTHRACENE, CHRYSENE AND BENZO[B]FLUORANTHENE IN FOODSTUFFS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH FLUORESCENCE DETECTION (HPLC-FD) |
UNE-EN ISO 19343:2018 | Microbiology of the food chain - Detection and quantification of histamine in fish and fishery products - HPLC method (ISO 19343:2017) |
I.S. EN 50414:2006 | TEST METHODS FOR ANALYSIS OF LEAD IN PVC TAKEN FROM INSULATION AND SHEATH OF ELECTRIC AND OPTICAL FIBRE CABLES - METHOD A: TOTAL LEAD CONTENT DETERMINATION WITH FLAME EXCITATION ATOMIC ABSORPTION SPECTROMETRY - METHOD B: QUALITATIVE ANALYSIS OF LEAD BY LEAD SULPHIDE STAINING |
UNI EN 15477 : 2009 | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
UNI CEN/TS 16188 : 2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ELEMENTS IN AQUA REGIA AND NITRIC ACID DIGESTS - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
BS EN ISO 10704:2015 | Water quality. Measurement of gross alpha and gross beta activity in non-saline water. Thin source deposit method |
I.S. EN 16319:2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
S.R. CEN TS 15604:2007 | FERTILIZERS - DETERMINATION OF DIFFERENT FORMS OF NITROGEN IN THE SAME SAMPLE, CONTAINING NITROGEN AS NITRIC, AMMONIACAL, UREA AND CYANAMIDE NITROGEN |
I.S. EN 15477:2009 | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
I.S. EN 15041:2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - POLYPHOSPHATES |
AAMI ISO 10993-14 : 2001 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 14: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM CERAMICS |
UNI EN ISO 25619-1 : 2009 | GEO-SYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 1: COMPRESSIVE CREEP PROPERTIES |
I.S. EN ISO 21613:2017 | (U, PU)O2 POWDERS AND SINTERED PELLETS - DETERMINATION OF CHLORINE AND FLUORINE (ISO 21613:2015) |
AAMI ISO 10993-15 : 2000 : R2011 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 15: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM METALS AND ALLOYS |
DIN EN 16877:2015-07 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF T-2 AND HT-2 TOXINS, DEOXYNIVALENOL AND ZEARALENONE, IN FEED MATERIALS AND COMPOUND FEED BY LC-MS |
ISO 2722:1997 | Vitreous and porcelain enamels Determination of resistance to citric acid at room temperature |
BS EN ISO 9697:2017 | Water quality. Gross beta activity in non-saline water. Test method using thick source |
EN ISO 5165:2018 | Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2017) |
I.S. EN 16007:2011 | ANIMAL FEEDING STUFFS - DETERMINATION OF OCHRATOXIN A IN ANIMAL FEED BY IMMUNOAFFINITY COLUMN CLEAN-UP AND HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH FLUORESCENCE DETECTION |
I.S. EN 16166:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
I.S. EN ISO 17380:2013 | SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE AND EASILY LIBERATABLE CYANIDE - CONTINUOUS-FLOW ANALYSIS METHOD (ISO 17380:2013) |
ISO 13291:2006 | Zinc sulfide concentrates Determination of zinc Solvent extraction and EDTA titrimetric method |
S.R. CEN ISO TS 21268-3:2009 | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 3: UP-FLOW PERCOLATION TEST |
UNI EN 15607 : 2009 | FOODSTUFFS - DETERMINATION OF D-BIOTIN BY HPLC |
I.S. EN ISO 14403-2:2012 | WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE USING FLOW ANALYSIS (FIA AND CFA) - PART 2: METHOD USING CONTINUOUS FLOW ANALYSIS (CFA) (ISO 14403-2:2012) |
S.R. CEN/TS 16233-1:2011 | FOODSTUFFS - HPLC METHOD FOR THE DETERMINATION OF XANTHOPHYLLS IN FISH FLESH - PART 1: DETERMINATION OF ASTAXANTHIN AND CANTHAXANTHIN |
I.S. EN 16801:2016 | FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - DETERMINATION OF METHYLMERCURY IN FOODSTUFFS OF MARINE ORIGIN BY ISOTOPE DILUTION GC-ICP-MS |
XP CEN ISO/TS 21268-4 : 2009 XP | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 4: INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
ISO 11533:2009 | Iron ores Determination of cobalt Flame atomic absorption spectrometric method |
S.R. CEN TS 15561:2007 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN CALCIUM CYANAMIDE CONTAINING NITRATES |
I.S. EN 13491:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
I.S. EN ISO 15091:2012 | PAINTS AND VARNISHES - DETERMINATION OF ELECTRICAL CONDUCTIVITY AND RESISTANCE (ISO 15091:2012) |
ISO 3681:1996 | Binders for paints and varnishes — Determination of saponification value — Titrimetric method |
I.S. ENV 14164:2002 | FOODSTUFFS - DETERMINATION OF VITAMIN B6 BY HPLC |
ISO 19699-1:2017 | Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods |
ISO 18862:2016 | Coffee and coffee products — Determination of acrylamide — Methods using HPLC-MS/MS and GC-MS after derivatization |
IP 71 : 1995 | SECTION 1: PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY - SECTION 2: GLASS CAPILLARY KINEMATIC VISCOMETERS - SPECIFICATIONS AND OPERATING INSTRUCTIONS (TWO PART SET) |
I.S. EN ISO 17678:2010 | MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
I.S. EN ISO 21078-1:2008 | DETERMINATION OF BORON(3) OXIDE IN REFRACTORY PRODUCTS - PART 1: DETERMINATION OF TOTAL BORON(3) OXIDE IN OXIDIC MATERIALS FOR CERAMICS, GLASS AND GLAZES |
EN 15692:2009 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method |
I.S. EN 16168:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF TOTAL NITROGEN USING DRY COMBUSTION METHOD |
UNE-ISO 3513:2010 | Chillies. Determination of Scoville index. |
BS 2000-556(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHODOUR EN GRAPHITE |
UNE-ISO 15593:2010 | Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Determination of particulate matter by ultraviolet absorbance and by fluorescence |
UNE-EN 10355:2014 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
ISO 13741-1:1998 | Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 1: Direct liquid injection method |
DIN EN ISO 2812-5:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
DIN EN 15947-4:2016-02 | Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
ISO 5815-2:2003 | Water quality — Determination of biochemical oxygen demand after n days (BODn) — Part 2: Method for undiluted samples |
DIN EN ISO 6872:2015-11 | DENTISTRY - CERAMIC MATERIALS (ISO 6872:2015) |
ISO 12739:2006 | Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method |
DIN EN ISO 12870:2015-07 (Draft) | OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS (ISO 12870:2012) |
I.S. EN ISO 16591:2010 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD |
I.S. EN 14805:2008 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORIDE FOR ON SITE ELECTROCHLORINATION USING NON-MEMBRANE TECHNOLOGY |
ISO/TS 17951-1:2016 | Water quality — Determination of fluoride using flow analysis (FIA and CFA) — Part 1: Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation |
ISO 15247:2015 | Zinc sulfide concentrates Determination of silver content Acid dissolution and flame atomic absorption spectrometric method |
ISO 25475:2016 | Fertilizers Determination of ammoniacal nitrogen |
I.S. EN ISO 23913:2009 | WATER QUALITY - DETERMINATION OF CHROMIUM(6) - METHOD USING FLOW ANALYSIS (FIA AND CFA) AND SPECTROMETRIC DETECTION |
ISO 2049:1996 | Petroleum products Determination of colour (ASTM scale) |
I.S. EN ISO 11702:2016 | ANIMAL AND VEGETABLE FATS AND OILS - ENZYMATIC DETERMINATION OF TOTAL STEROLS CONTENT |
UNI EN ISO 11260 : 2011 | SOIL QUALITY - DETERMINATION OF EFFECTIVE CATION EXCHANGE CAPACITY AND BASE SATURATION LEVEL USING BARIUM CHLORIDE SOLUTION |
I.S. EN 16187:2015 | FOODSTUFFS - DETERMINATION OF FUMONISIN B1 AND FUMONISIN B2 IN PROCESSED MAIZE CONTAINING FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION AFTER PRE-COLUMN DERIVATISATION |
ISO 2596:2006 | Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric, Karl Fischer and mass-loss methods |
ONORM EN ISO 4098 : 2006 | LEATHER - CHEMICAL TESTS - DETERMINATION OF WATER-SOLUBLE MATTER, WATER-SOLUBLE INORGANIC MATTER AND WATER-SOLUBLE ORGANIC MATTER |
ISO 182-1:1990 | Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 1: Congo red method |
BS EN ISO 11133 : 2014 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA |
NFT 60 613 : 2003 | PETROLEUM PRODUCTS AND LUBRICANTS - AQUEOUS FLUIDS FOR METAL WORKING - EVALUATION OF THE BIOLOGICAL RESISTANCE |
BS EN ISO 5398-3:2007 | Leather. Chemical determination of chromic oxide content Quantification by atomic absorption spectrometry |
I.S. EN 27785-1:1994 | DENTAL HANDPIECES - PART 1: HIGH SPEED AIR TURBINE HANDPIECES |
BIS IS 16080 : 2013 | ANIMAL FEEDING STUFFS, ANIMAL PRODUCTS AND FAECES OR URINE - DETERMINATION OF GROSS CALORIFIC VALUE - BOMB CALORIMETER METHOD |
BS EN ISO 4045:2008 | Leather. Chemical tests. Determination of pH |
IP 459-2 : 2000 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 2: METHOD BY EXTRACTION |
NF EN ISO 28158 : 2010 | DENTISTRY - INTEGRATED DENTAL FLOSS AND HANDLES |
PD ISO/TS 15029-2:2012 | Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray test. Stabilized flame heat release method |
ISO 13165-3:2016 | Water quality Radium-226 Part 3: Test method using coprecipitation and gamma-spectrometry |
S.R. CEN TS 15749:2008 | FERTILIZERS - DETERMINATION OF SULFATES CONTENT USING THREE DIFFERENT METHODS |
UNE 34903:2014 | Cereals and cereal products. Determination of triticum durum quality using a sedimentation test method in a sodium dodecyl sulphate (SDS) solution. |
I.S. EN 15040:2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - PHOSPHONIC ACIDS AND SALTS |
S.R. CEN ISO/TS 16189:2013 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO QUANTITATIVELY DETERMINE DIMETHYLFORMAMIDE IN FOOTWEAR MATERIALS (ISO/TS 16189:2013) |
I.S. EN 10361:2015 | ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
I.S. EN 16175-1:2016 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF MERCURY - PART 1: COLD-VAPOUR ATOMIC ABSORPTION SPECTROMETRY (CV-AAS) |
I.S. EN ISO 17075-1:2017 | LEATHER - CHEMICAL DETERMINATION OF CHROMIUM(6) CONTENT - PART 1: COLORIMETRIC METHOD (EN ISO 17075:2007 REV ) |
PREN 16087-1 : DRAFT 2010 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF THE AEROBIC BIOLOGICAL ACTIVITY - PART 1: OXYGEN UPTAKE RATE (OUR) |
UNI EN ISO 4098 : 2006 | LEATHER - CHEMICAL TESTS - DETERMINATION OF WATER-SOLUBLE MATTER, WATER-SOLUBLE INORGANIC MATTER AND WATER-SOLUBLE ORGANIC MATTER |
S.R. CEN/TS 15937:2013 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF SPECIFIC ELECTRICAL CONDUCTIVITY |
ISO 17942:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of boron nitride powders |
PREN 12126 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - LIQUEFIED AMMONIA |
ISO 17218:2014 | Sterile acupuncture needles for single use |
I.S. EN ISO 9073-16:2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 16: DETERMINATION OF RESISTANCE TO PENETRATION BY WATER (HYDROSTATIC PRESSURE) |
ISO 17378-2:2014 | Water quality — Determination of arsenic and antimony — Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS) |
BS EN ISO 2812-2:2007 | Paints and varnishes. Determination of resistance to liquids Water immersion method |
UNE-EN 16277:2012 | Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide) |
EN 13493:2018 | Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
ISO 17190-6:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation |
I.S. EN ISO 22288:2009 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE VAMP FLEX METHOD |
PREN 12678 : DRAFT 2014 | CHEMICAL USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POTASSIUM PEROXOMONOSULFATE |
UNE-EN 15749:2010 | Fertilizers - Determination of sulfates content using three different methods |
BS EN 13523-27:2017 | Coil coated metals. Test methods Resistance to humid poultice (Cataplasm test) |
CEN ISO/TS 15883-5:2005 | Washer-disinfectors - Part 5: Test soils and methods for demonstrating cleaning efficacy (ISO/TS 15883-5:2005) |
PREN 17215 : DRAFT 2018 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON-BASED COAGULANTS - ANALYTICAL METHODS |
UNI CEN/TS 14418 : 2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF FREEZING-THAWING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
PREN 17093 : DRAFT 2017 | DOMESTIC APPLIANCES USED FOR DRINKING WATER TREATMENT NOT CONNECTED TO WATER SUPPLY - JUG WATER FILTER SYSTEMS - SAFETY AND PERFORMANCE REQUIREMENTS, LABELING AND INFORMATION TO BE SUPPLIED |
EN ISO 4045:2008 | Leather - Chemical tests - Determination of pH (ISO 4045:2008) |
EN ISO 21613:2017 | (U, Pu)O2 Powders and sintered pellets - Determination of chlorine and fluorine (ISO 21613:2015) |
PREN 1240 : DRAFT 2010 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
BS 2000-291(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
BS ISO 12830:2011 | Paper, board and pulps. Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium |
UNI CEN/TS 16171 : 2013 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ELEMENTS USING INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) |
UNI EN 15041 : 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - POLYPHOSPHATES |
UNI EN ISO 2812-3 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM |
UNI EN ISO 15351 : 2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
UNE-EN 15835:2010 | Foodstuffs - Determination of ochratoxin A in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection |
UNE-EN ISO 19071:2016 | Leather - Chemical tests - Determination of chromium (VI) and the reductive potential for chromium tanning agents (ISO 19071:2016) |
ISO 26482:2010 | Hardmetals — Determination of lead and cadmium content |
ISO 17858:2007 | Water quality Determination of dioxin-like polychlorinated biphenyls Method using gas chromatography/mass spectrometry |
UNE-EN 16711-2:2016 | Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution |
EN ISO 811:2018 | Textiles - Determination of resistance to water penetration - Hydrostatic pressure test (ISO 811:2018) |
BS 2000-459.1(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
ISO 10704:2009 | Water quality Measurement of gross alpha and gross beta activity in non-saline water Thin source deposit method |
BIS IS ISO 5416 : 2006 | DIRECT REDUCED IRON - DETERMINATION OF METALLIC IRON - BROMINE-METHANOL TITRIMETRIC METHOD |
PREN 15030 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SILVER SALTS FOR INTERMITTENT USE |
NF EN 50414 : 2006 | TEST METHODS FOR ANALYSIS OF LEAD IN PVC TAKEN FROM INSULATION AND SHEATH OF ELECTRIC AND OPTICAL FIBRE CABLES - METHOD A: TOTAL LEAD CONTENT DETERMINATION WITH FLAME EXCITATION ATOMIC ABSORPTION SPECTROMETRY - METHOD B: QUALITATIVE ANALYSIS OF LEAD BY LEAD SULPHIDE STAINING |
ISO 14435:2005 | Carbonaceous materials for the production of aluminium Petroleum coke Determination of trace metals by inductively coupled plasma atomic emission spectrometry |
UNI EN ISO 16050 : 2011 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B1, AND THE TOTAL CONTENT OF AFLATOXINS B1, B2, G1 AND G2 IN CEREALS, NUTS AND DERIVED PRODUCTS - HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
IP 454 : 2015 | DETERMINATION OF PHOSPHORUS IN GASOLINE - SPECTROPHOTOMETRIC METHOD |
EN 16523-1:2015 | Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact |
UNE-EN ISO 19074:2016 | Leather - Physical and mechanical tests - Determination of water absorption by capillary action (wicking) (ISO 19074:2015) |
SAE ARP 5088 : 2014 | TEST METHOD FOR THE DETERMINATION OF TOTAL ACIDITY IN POLYOL ESTER AND DIESTER GAS TURBINE LUBRICANTS BY AUTOMATIC POTENTIOMETRIC TITRATION |
EN ISO 11640:2012 | Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012) |
CEI EN 62554 : 2012 | SAMPLE PREPARATION FOR MEASUREMENT OF MERCURY LEVEL IN FLUORESCENT LAMPS |
EN 1568-3:2018 | Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids |
ASTM F 963 : 2017 : REDLINE | Standard Consumer Safety Specification for Toy Safety |
UNE-EN ISO 5403-1:2012 | Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer) (ISO 5403-1:2011) |
EN ISO 9696:2017 | Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017) |
UNI EN 15890 : 2010 | FOODSTUFFS - DETERMINATION OF PATULIN IN FRUIT JUICE AND FRUIT BASED PUREE FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH LIQUID/LIQUID PARTITION CLEANUP AND SOLID PHASE EXTRACTION AND UV DETECTION |
ISO/TS 18223:2015 | Nickel alloys — Determination of Nickel content — Inductively coupled plasma atomic emission spectrometric method |
UNI CEN/TS 15606 : 2009 | FOODSTUFFS - DETERMINATION OF ACESULFAME-K, ASPARTAME, NEOHESPERIDINE-DIHYDROCHALCONE AND SACCHARIN - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
EN ISO 15349-2:2003 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
UNI EN 16168 : 2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF TOTAL NITROGEN USING DRY COMBUSTION METHOD |
NF ISO 14932 : 2012 | RUBBER COMPOUNDING INGREDIENTS - ORGANIC VULCANIZING AGENTS - DETERMINATION OF ORGANIC PEROXIDE CONTENT |
UNI EN 15909 : 2010 | FERTLIZERS - DETERMINATION OF CALCIUM AND FORMATE IN CALCIUM FOLIAR FERTILIZERS |
ISO 8425:2013 | Nuclear fuel technology — Determination of plutonium in pure plutonium nitrate solutions — Gravimetric method |
ISO 22961:2008 | Titanium and titanium alloys — Determination of iron — Atomic absorption spectrometry |
ISO 8096:2005 | Rubber- or plastics-coated fabrics for water-resistant clothing — Specification |
ISO 22036:2008 | Soil quality — Determination of trace elements in extracts of soil by inductively coupled plasma - atomic emission spectrometry (ICP - AES) |
EN ISO 17072-2:2011 | Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011) |
ISO 22725:2007 | Nickel alloys Determination of tantalum Inductively coupled plasma atomic emission spectrometric method |
EN ISO 17226-1:2008 | Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography (ISO 17226-1:2008) |
ISO 11350:2012 | Water quality — Determination of the genotoxicity of water and waste water — Salmonella/microsome fluctuation test (Ames fluctuation test) |
ISO 16424:2012 | Nuclear energy — Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements |
EN ISO 20863:2018 | Footwear - Test methods for stiffeners and toepuffs - Bondability (ISO 20863:2018) |
ISO 3856-4:1984 | Paints and varnishes — Determination of "soluble" metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method |
ISO 6588-2:2012 | Paper, board and pulps Determination of pH of aqueous extracts Part 2: Hot extraction |
ISO 6495:1999 | Animal feeding stuffs Determination of water-soluble chlorides content |
ISO 18632:2010 | Alloyed steel Determination of manganese Potentiometric and visual titration method |
ISO 18645:2016 | Fertilizers and soil conditioners Water soluble fertilizer General requirements |
UNI EN ISO 8199 : 2008 | WATER QUALITY - GENERAL GUIDANCE ON THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
EN ISO 7393-2:2018 | Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017) |
DIN EN ISO 17700:2005-12 | FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING |
DIN EN ISO 28319:2016-06 (Draft) | DENTISTRY - LASER WELDING |
BS EN ISO 5667-3:2012 | Water quality. Sampling Preservation and handling of water samples |
ISO 5165:2017 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
UNE-EN ISO 11640:2013 | Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012) |
ISO 16308:2014 | Water quality — Determination of glyphosate and AMPA — Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection |
DIN EN 13037:2012-01 | Soil improvers and growing media - Determination of pH |
ISO 6872:2015 | Dentistry — Ceramic materials |
EN ISO 10139-1:2018 | Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO 10139-1:2018) |
ISO 7886-4:2006 | Sterile hypodermic syringes for single use Part 4: Syringes with re-use prevention feature |
BS EN ISO 28319:2010 | Dentistry. Laser welding |
EN 12014-2:2017 | Foodstuffs - Determination of nitrate and/or nitrite content - Part 2: HPLC/IC method for the determination of nitrate content of vegetables and vegetable products |
EN ISO 10477:2004 | Dentistry - Polymer-based crown and bridge materials (ISO 10477:2004) |
ISO 7206-4:2010 | Implants for surgery Partial and total hip joint prostheses Part 4: Determination of endurance properties and performance of stemmed femoral components |
EN ISO 19448:2018 | Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018) |
ISO 26603:2017 | Plastics Aromatic isocyanates for use in the production of polyurethanes Determination of total chlorine |
ISO 17992:2013 | Iron ores — Determination of arsenic content — Hydride generation atomic absorption spectrometric method |
ISO 17690:2015 | Water quality Determination of available free cyanide (pH 6) using flow injection analysis (FIA), gas-diffusion and amperometric detection |
ISO 15353:2001 | Steel and iron — Determination of tin content — Flame atomic absorption spectrometric method (extraction as Sn-SCN) |
ISO/TS 17379-1:2013 | Water quality — Determination of selenium — Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS) |
ISO 14388-2:2014 | Soil quality Acid-base accounting procedure for acid sulfate soils Part 2: Chromium reducible sulfur (CRS) methodology |
ISO 11047:1998 | Soil quality Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc Flame and electrothermal atomic absorption spectrometric methods |
I.S. EN 15490:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE |
I.S. EN 15489:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD |
UNE-EN ISO 3961:2013 | Animal and vegetable fats and oils - Determination of iodine value (ISO 3961:2013) |
ISO 14849:1999 | Plastics Phenol-formaldehyde mouldings Determination of free ammonia and ammonium compounds Indophenol method |
ISO 6488:2004 | Tobacco and tobacco products Determination of water content Karl Fischer method |
ISO 8691:1994 | Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing |
ISO 928:1997 | Spices and condiments — Determination of total ash |
I.S. EN ISO 16266:2008 | WATER QUALITY - DETECTION AND ENUMERATION OF PSEUDOMONAS AERUGINOSA - METHOD BY MEMBRANE FILTRATION |
I.S. EN 15562:2009 | FERTILIZERS - DETERMINATION OF CYANAMIDE NITROGEN |
I.S. ISO 3856-2:1988 | PAINTS AND VARNISHES - DETERMINATION OF "SOLUBLE" METAL CONTENT - PART 2: DETERMINATION OF ANTIMONY CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD AND RHODAMINE B SPECTROPHOTOMETRIC METHOD |
I.S. EN 15604:2009 | FERTILIZERS - DETERMINATION OF DIFFERENT FORMS OF NITROGEN IN THE SAME SAMPLE, CONTAINING NITROGEN AS NITRIC, AMMONIACAL, UREA AND CYANAMIDE NITROGEN |
ISO 9463:2009 | Nuclear energy Nuclear fuel technology Determination of plutonium in nitric acid solutions by spectrophotometry |
DIN EN ISO 8871-2:2014-08 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003 + AMD.1:2005) |
IEC 62554:2011+AMD1:2017 CSV | Sample preparation for measurement of mercury level in fluorescent lamps |
NF EN ISO 10271 : 2011 | DENTISTRY - CORROSION TEST METHODS FOR METALLIC MATERIALS |
ISO 17694:2016 | Footwear Test methods for uppers and lining Flex resistance |
I.S. EN ISO 20126:2012 | DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012) |
I.S. EN ISO 7886-4:2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 4: SYRINGES WITH RE-USE PREVENTION FEATURE |
ISO 20280:2007 | Soil quality Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry |
ISO 10204:2017 | Iron ores — Determination of magnesium — Flame atomic absorption spectrometric method |
ISO 13898-1:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 1: General requirements and sample dissolution |
I.S. EN 1406:2017 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MODIFIED STARCHE |
I.S. EN 15452:2008 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY O,P-EDDHA BY REVERSED PHASE HPLC |
I.S. EN 15492:2012 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
I.S. EN 15561:2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN CALCIUM CYANAMIDE CONTAINING NITRATES |
ISO 930:1997 | Spices and condiments — Determination of acid-insoluble ash |
BS EN ISO 13938-2:1999 | Textiles. Bursting properties of fabrics Pneumatic method for determination of bursting strength and bursting distension |
I.S. EN 15704:2009 | LIMING MATERIALS - DETERMINATION OF THE BREAKDOWN OF GRANULATED CALCIUM AND CALCIUM/MAGNESIUM CARBONATES UNDER THE INFLUENCE OF WATER |
ISO 16373-3:2014 | Textiles — Dyestuffs — Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) |
ISO 4939:2016 | Steel Determination of nickel Dimethylglyoxime spectrophotometric method |
EN 12594:2014 | Bitumen and bituminous binders - Preparation of test samples |
ISO 17710:2002 | Plastics — Polyols for use in the production of polyurethane — Determination of degree of unsaturation by microtitration |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
ISO 16632:2013 | Tobacco and tobacco products Determination of water content Gas-chromatographic method |
ISO 7766:2003 | Processing photographic wastes — Analysis of cyanides — Determination of hexacyanoferrate (II) and hexacyanoferrate (III) by spectrometry |
I.S. EN ISO 9167-1:1996 | RAPESEED - DETERMINATION OF GLUCOSINOLATES CONTENT - PART 1: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 9167-1: 1992) |
DIN EN ISO 20783-2:2004-05 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003) |
DIN EN 1204:2005-06 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM TETRAHYDROGEN BIS(ORTHOPHOSPHATE) |
NF EN ISO 7886-3 : 2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION |
DIN EN 12386:2013-01 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE |
DIN EN 1211:2005-06 | Chemicals used for treatment of water intended for human consumption - Potassium tripolyphosphate; German version EN 1211:2005 |
DIN EN 1210:2005-06 | Chemicals used for treatment of water intended for human consumption - Sodium tripolyphosphate; German version EN 1210:2005 |
DIN EN 1200:2005-06 | Chemicals used for treatment of water intended for human consumption - Trisodium orthophosphate; German version EN 1200:2005 |
DIN EN ISO 22254:2005-11 | Dentistry - Manual toothbrushes - Resistance of tufted portion to deflection (ISO 22254:2005) |
DIN EN 1197:2014-06 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MONOZINC PHOSPHATE SOLUTION |
DIN EN 1198:2005-06 | Chemicals used for treatment of water intended for human consumption - Sodium dihydrogen orthophosphate; German version EN 1198:2005 |
I.S. EN ISO 3071:2006 | TEXTILES - DETERMINATION OF PH OF AQUEOUS EXTRACT |
DIN EN 12902:2005-02 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - INORGANIC SUPPORTING AND FILTERING MATERIALS - METHODS OF TEST |
DIN EN 1203:2005-06 | Chemicals used for treatment of water intended for human consumption - Tripotassium orthophosphate; German version EN 1203:2005 |
DIN EN 12822:2014-08 | Foodstuffs- Determination of vitaminE by high performance liquid chromatography- Measurement of α-, β-, γ- and δ-tocopherols |
DIN EN ISO 6873:2013-07 | DENTISTRY - GYPSUM PRODUCTS (ISO 6873:2013) |
DIN EN ISO 4263-4:2006-05 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006) |
DIN EN 12931:2015-05 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHEMICALS FOR EMERGENCY USE - SODIUM DICHLOROISOCYANURATE, ANHYDROUS |
DIN EN 14362-1:2012-04 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 1: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE WITH AND WITHOUT EXTRACTING THE FIBRES |
DIN EN 12174:2013-08 | Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate |
DIN EN ISO 4263-3:2016-05 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS (ISO 4263-3:2015) |
DIN EN ISO 4263-2:2003-10 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS; TOST TEST - PART 2: PROCEDURE FOR CLASS HFC HYDRAULIC FLUIDS |
DIN EN ISO 9917-1:2008-01 | DENTISTRY - WATER-BASED CEMENTS - PART 1: POWDER/LIQUID ACID-BASE CEMENTS |
DIN EN 1206:2005-06 | Chemicals used for treatment of water intended for human consumption - Tetrasodium pyrophosphate; German version EN 1206:2005 |
DIN EN 1202:2005-06 | Chemicals used for treatment of water intended for human consumption - Dipotassium hydrogen orthophosphate; German version EN 1202:2005 |
DIN EN 1410:2008-04 | Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides |
DIN EN ISO 11997-2:2013-12 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
DIN EN 1421:2013-03 | Chemicals used for treatment of water intended for human consumption - Ammonium chloride |
DIN EN 12490:2010-11 | Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood |
DIN EN 1199:2005-06 | Chemicals used for treatment of water intended for human consumption - Disodium hydrogen orthophosphate; German version EN 1199:2005 |
DIN EN 12594:2015-01 | BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
DIN EN 12911:2013-07 | Products used for treatment of water intended for human consumption - Manganese greensand |
DIN EN ISO 14184-2:2011-12 | Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:2011) |
DIN EN 1019:2005-08 | Chemicals used for treatment of water intended for human consumption - Sulfur dioxide |
DIN EN 12821:2009-08 | FOODSTUFFS - DETERMINATION OF VITAMIN D BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MEASUREMENT OF CHOLECALCIFEROL (D[3]) OR ERGOCALCIFEROL (D[2]) |
DIN EN 896:2013-02 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROXIDE |
DIN EN ISO 15181-2:2007-10 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate (ISO 15181-2:2007) |
DIN EN 890:2012-09 | Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate solution |
DIN EN ISO 15912:2016-08 | DENTISTRY - REFRACTORY INVESTMENT AND DIE MATERIAL (ISO 15912:2016) |
DIN EN ISO 15774:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CADMIUM CONTENT BY DIRECT GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (ISO 15774:2017) |
DIN EN ISO 5764:2009-10 | Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009) |
DIN EN ISO 13934-2:2014-06 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014) |
UNE-EN ISO 20783-1:2011 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011) |
DIN EN 13752:2012-11 | Chemicals used for treatment of water intended for human consumption - Manganese dioxide |
DIN EN 14122:2014-08 | FOODSTUFFS - DETERMINATION OF VITAMIN B1 BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
DIN EN 117:2013-01 | Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
DIN EN ISO 8502-12:2005-03 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 12: FIELD METHOD FOR THE TITRIMETRIC DETERMINATION OF WATER-SOLUBLE FERROUS IONS |
DIN EN ISO 13934-1:2013-08 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013) |
DIN EN 939:2016-09 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HYDROCHLORIC ACID |
DIN EN 13890:2010-01 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
DIN EN 901:2013-12 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYPOCHLORITE |
DIN EN ISO 2417:2016-07 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF THE STATIC ABSORPTION OF WATER (ISO 2417:2016) |
DIN EN 902:2016-09 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HYDROGEN PEROXIDE |
DIN EN 14133:2009-09 | Foodstuffs - Determination of ochratoxin A in wine and beer - HPLC method with immunoaffinity column clean-up |
DIN EN ISO 15181-3:2007-10 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 3: CALCULATION OF THE ZINC ETHYLENE-BIS (DITHIOCARBAMATE) (ZINEB) RELEASE RATE BY DETERMINATION OF THE CONCENTRATION OF ETHYLENETHIOUREA IN THE EXTRACT |
DIN EN ISO 18412:2007-02 | Water quality - Determination of chromium(VI) - Photometric method for weakly contaminated water (ISO 18412:2005) |
DIN EN ISO 15181-1:2007-10 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007) |
DIN EN 12123:2013-02 | Chemicals used for treatment of water intended for human consumption - Ammonium sulfate |
DIN EN 12121:2013-02 | Chemicals used for treatment of water intended for human consumption - Sodium disulfite |
BS EN 14820:2004 | Single-use containers for human venous blood specimen collection |
BS EN 1899-2:1998 | Water quality. Determination of biochemical oxygen demand after n days (BODn) Method for undiluted samples |
ISO 5509:2000 | Animal and vegetable fats and oils Preparation of methyl esters of fatty acids |
ISO 14184-1:2011 | Textiles — Determination of formaldehyde — Part 1: Free and hydrolysed formaldehyde (water extraction method) |
BS EN ISO 2810:2004 | Paints and varnishes. Natural weathering of coatings. Exposure and assessment |
BS EN ISO 6222:1999 | Water quality. Enumeration of culturable micro-organisms. Colony count by inoculation in a nutrient agar culture medium |
BS EN ISO 20127:2005 | Dentistry. Powered toothbrushes. General requirements and test methods |
ISO 17230:2006 | Leather — Physical and mechanical tests — Determination of water penetration pressure |
ISO 5398-2:2009 | Leather Chemical determination of chromic oxide content Part 2: Quantification by colorimetric determination |
ISO 10340:1995 | Optics and optical instruments Contact lenses Method for determining the extractable substances |
BS EN 2435-003:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion and fluid resistance |
BS EN 1483:2007 | Water quality. Determination of mercury. Method using atomic absorption spectrometry |
BS EN ISO 6744-2:2004 | Binders for paints and varnishes. Alkyd resins Determination of phthalic anhydride content |
ISO 10271:2011 | Dentistry Corrosion test methods for metallic materials |
ISO 21606:2007 | Dentistry — Elastomeric auxiliaries for use in orthodontics |
ISO 1135-5:2015 | Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus |
UNE-EN ISO 105-E02:2013 | Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013) |
UNE-EN ISO 105-E07:2010 | Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010) |
ISO 20783-2:2003 | Petroleum and related products — Determination of emulsion stability of fire-resistant fluids — Part 2: Fluids in category HFB |
BS EN ISO 4263-3:2010 | Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Anhydrous procedure for synthetic hydraulic fluids |
ISO 17294-2:2016 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes |
ISO 5764:2009 | Milk — Determination of freezing point — Thermistor cryoscope method (Reference method) |
ISO 28706-4:2016 | Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel |
ISO 11846:1995 | Corrosion of metals and alloys Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys |
BS EN ISO 15587-1:2002 | Water quality. Digestion for the determination of selected elements in water Aqua regia digestion |
UNE-EN 12121:2013 | Chemicals used for treatment of water intended for human consumption - Sodium disulfite |
BS EN ISO 21627-1:2009 | Plastics. Epoxy resins. Determination of chlorine content Inorganic chlorine |
ISO 8130-3:1992 | Coating powders Part 3: Determination of density by liquid displacement pyknometer |
BS EN 14352:2004 | Foodstuffs. Determination of fumonisin B1 and B2 in maize based foods. HPLC method with immunoaffinity column clean up |
UNE-EN ISO 8502-2:2017 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017) |
ISO 105-B07:2009 | Textiles Tests for colour fastness Part B07: Colour fastness to light of textiles wetted with artificial perspiration |
BS EN ISO 17294-1:2006 | Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS) General guidelines |
ISO 8655-7:2005 | Piston-operated volumetric apparatus Part 7: Non-gravimetric methods for the assessment of equipment performance |
ISO 27587:2009 | Leather Chemical tests Determination of the free formaldehyde in process auxiliaries |
BS EN 2436-004:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer High corrosion and fluid resistance with surface preparation tolerance |
ISO 16960:2014 | Natural gas — Determination of sulfur compounds — Determination of total sulfur by oxidative microcoulometry method |
UNI EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
ISO 3262-18:2000 | Extenders for paints — Specifications and methods of test — Part 18: Precipitated sodium aluminium silicate |
UNE-EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
BS EN 12457-2:2002 | Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
UNE-EN ISO 14184-2:2011 | Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:2011) |
ISO 28706-1:2008 | Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 1: Determination of resistance to chemical corrosion by acids at room temperature |
ISO 15682:2000 | Water quality Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection |
UNE-EN ISO 9626:2017 | Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016) |
BS EN ISO 105-Z07:1998 | Textiles. Tests for colour fastness Determination of application solubility and solution stability of water-soluble dyes |
UNE-EN 938:2016 | Chemicals used for treatment of water intended for human consumption - Sodium chlorite |
ISO 9020:1994 | Binders for paints and varnishes Determination of free-formaldehyde content of amino resins Sodium sulfite titrimetric method |
ISO 11216:1998 | Modified starch — Determination of content of carboxymethyl groups in carboxymethyl starch |
BS EN ISO 9626:2016 | Stainless steel needle tubing for the manufacture of medical devices. Requirements and test methods |
ISO 105-E04:2013 | Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration |
BS EN ISO 15349-2:2003 | Unalloyed steel. Determination of low carbon content Infrared absorption method after combustion in an induction furnace (with preheating) |
BS EN 14104:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of acid value |
ISO 12311:2013 | Personal protective equipment — Test methods for sunglasses and related eyewear |
ISO/TR 8502-1:1991 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 1: Field test for soluble iron corrosion products |
BS EN 12447:2001 | Geotextiles and geotextile-related products. Screening test method for determining the resistance to hydrolysis in water |
BS EN ISO 660:2000 | Animal and vegetable fats and oils. Determination of acid value and acidity |
BS EN 12634:1998 | Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method |
BS EN 12823-2:2000 | Foodstuffs. Determination of vitamin A by high performance liquid chromatography Measurement of β-carotene |
ISO 20795-1:2013 | Dentistry Base polymers Part 1: Denture base polymers |
UNE-EN ISO 105-E12:2010 | Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010) |
BS EN 12955:1999 | Foodstuffs. Determination of aflatoxin B<sub>1</sub>, and the sum of aflatoxins B<sub>1</sub>, B<sub>2</sub>, G<sub>1</sub> and G<sub>2</sub> in cereals, shell-fruits and derived products. High performance liquid chromatographic method with post column derivatization and immunoaffinity column clean up |
ISO 7785-2:1995 | Dental handpieces Part 2: Straight and geared angle handpieces |
ISO 17895:2005 | Paints and varnishes — Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
BS EN 12149:1998 | Wallcoverings in roll form. Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release |
UNE-EN ISO 11609:2017 | Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017) |
BS EN ISO 835:2007 | Laboratory glassware. Graduated pipettes |
BS EN ISO 21627-3:2009 | Plastics. Epoxy resins. Determination of chlorine content Total chlorine |
BS EN ISO 5163:2014 | Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method |
BS EN 12595:2014 | Bitumen and bituminous binders. Determination of kinematic viscosity |
BS EN 12933:2015 | Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Trichloroisocyanuric acid |
ISO 21078-2:2006 | Determination of boron(III) oxide in refractory products — Part 2: Acid extraction method for the determination of boron(III) oxide in binder components |
ISO 23913:2006 | Water quality — Determination of chromium(VI) — Method using flow analysis (FIA and CFA) and spectrometric detection |
ISO 11244:1998 | Dental brazing investments |
BS EN 888:2004 | Chemicals used for treatment of water intended for human consumption. Iron (III) chloride |
BS EN ISO 2566-2:2001 | Steel. Conversion of elongation values Austenitic steels |
ISO 12846:2012 | Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment |
ISO 13161:2011 | Water quality Measurement of polonium 210 activity concentration in water by alpha spectrometry |
ISO 3262-4:1998 | Extenders for paints — Specifications and methods of test — Part 4: Whiting |
BS EN ISO 7711-1 : 1998 | DENTAL ROTARY INSTRUMENTS - DIAMOND INSTRUMENTS - PART 1: DIMENSIONS, REQUIREMENTS, MARKING AND PACKAGING |
UNE-EN ISO 15912:2016 | Dentistry - Refractory investment and die material (ISO 15912:2016) |
BS EN ISO 1135-4:2015 | Transfusion equipment for medical use Transfusion sets for single use, gravity feed |
BS EN 13249:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
ISO 4920:2012 | Textile fabrics — Determination of resistance to surface wetting (spray test) |
ISO 2870:2009 | Surface active agents — Detergents — Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions |
ISO 15702:1998 | Leather — Tests for colour fastness — Colour fastness to machine washing |
BS EN ISO 15914:2005 | Animal feeding stuffs. Enzymatic determination of total starch content |
BS EN 117:2012 | Wood preservatives. Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
ISO 105-E07:2010 | Textiles Tests for colour fastness Part E07: Colour fastness to spotting: Water |
UNE-EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
BS EN 897:2012 | Chemicals used for treatment of water intended for human consumption. Sodium carbonate |
UNE-EN 12671:2016 | Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ |
ISO 11905-1:1997 | Water quality — Determination of nitrogen — Part 1: Method using oxidative digestion with peroxodisulfate |
EN 1390:2006 | Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method |
UNE-EN ISO 5163:2014 | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014) |
ISO 14182:1999 | Animal feeding stuffs — Determination of residues of organophosphorus pesticides — Gas chromatographic method |
UNE-EN 12125:2013 | Chemicals used for treatment of water intended for human consumption - Sodium thiosulfate |
DIN EN ISO 10993-15:2009-10 | Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000) |
ISO 9626:2016 | Stainless steel needle tubing for the manufacture of medical devices — Requirements and test methods |
ISO 10705-1:1995 | Water quality — Detection and enumeration of bacteriophages — Part 1: Enumeration of F-specific RNA bacteriophages |
UNE-EN 12926:2015 | Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfate |
UNE-EN ISO 21627-2:2010 | Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009) |
BS EN ISO 15710:2006 | Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
UNE-EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
DIN EN ISO 4404-1:2012-10 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
ISO 9308-1:2014 | Water quality — Enumeration of Escherichia coli and coliform bacteria — Part 1: Membrane filtration method for waters with low bacterial background flora |
BS EN ISO 22254:2005 | Manual toothbrushes. Resistance of tufted portion to deflection |
ISO 2495:1995 | Iron blue pigments Specifications and methods of test |
DIN EN 14984:2016-10 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
DIN EN 14944-3:2009-01 | Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products |
ISO 20127:2005 | Dentistry Powered toothbrushes General requirements and test methods |
BS EN 13176:2015 | Chemicals used for treatment of water intended for human consumption. Ethanol |
BS EN ISO 9167-2:1997 | Rapeseed. Determination of glucosinolates content Method using X-ray fluorescence spectrometry |
UNE-EN 12912:2013 | Products used for treatment of water intended for human consumption - Barite |
ISO 3262-6:1998 | Extenders for paints — Specifications and methods of test — Part 6: Precipitated calcium carbonate |
ISO 13395:1996 | Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
BS EN 1988-2:1998 | Foodstuffs. Determination of sulfite Enzymatic method |
UNE-EN ISO 15774:2017 | Animal and vegetable fats and oils - Determination of cadmium content by direct graphite furnace atomic absorption spectrometry (ISO 15774:2017) |
ISO 6871-2:1994 | Dental base metal casting alloys Part 2: Nickel-based alloys |
UNE-EN 12868:2018 | Child use and care articles - Method for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers |
UNE-EN 49-1:2016 | Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 1: Application by surface treatment (Laboratory method) |
UNE-EN 13138-2:2015 | Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held |
ISO 22478:2006 | Water quality — Determination of certain explosives and related compounds — Method using high-performance liquid chromatography (HPLC) with UV detection |
ISO 15181-1:2007 | Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides |
I.S. EN ISO 12402-7:2006 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 8655-2:2002 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 2: PISTON PIPETTES |
UNE-EN ISO 6246:2017 | Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017) |
EN ISO 11125-4:1997 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993) |
EN ISO 20127:2005 | Dentistry - Powered toothbrushes - General requirements and test methods (ISO 20127:2005) |
I.S. EN ISO 20127:2005 | DENTISTRY - POWERED TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 660:2009 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ACID VALUE AND ACIDITY |
DIN EN ISO 7253:2002-04 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
EN ISO 2812-5:2007 | Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2007) |
UNE-EN 1811:2011 | Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin |
EN ISO 18369-3:2017 | Ophthalmic optics - Contact lenses - Part 3: Measurement methods (ISO 18369-3:2017, Corrected version 2017-10-01) |
I.S. EN ISO 10271:2011 | DENTISTRY - CORROSION TEST METHODS FOR METALLIC MATERIALS |
EN ISO 660:2009 | Animal and vegetable fats and oils - Determination of acid value and acidity (ISO 660:2009) |
UNE-EN ISO 439:2011 | Steel and iron - Determination of total silicon content - Gravimetric method (ISO 439:1994) |
IEC 62321-4:2013+AMD1:2017 CSV | Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS |
ONORM EN ISO 14088 : 2012 | LEATHER - CHEMICAL TESTS - QUANTITATIVE ANALYSIS OF TANNING AGENTS BY FILTER METHOD (ISO 14088:2012) |
EN ISO 17234-1:2015 | Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 1: Determination of certain aromatic amines derived from azo colorants (ISO 17234-1:2015) |
EN ISO 11704:2015 | Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method (ISO 11704:2010) |
EN ISO 7886-3:2009 | Sterile hypodermic syringes for single use - Part 3: Auto-disable syringes for fixed-dose immunization (ISO 7886-3:2005) |
I.S. EN ISO 7886-3:2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION |
EN ISO 17730:2014 | Dentistry - Fluoride varnishes (ISO 17730:2014) |
EN ISO 10271:2011 | Dentistry - Corrosion test methods for metallic materials (ISO 10271:2011) |
EN ISO 13438:2004 | Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438:2004) |
I.S. EN ISO 2810:2004 | PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
I.S. EN ISO 8502-9:2000 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 9: FIELD METHOD FOR THE CONDUCTOMETRIC DETERMINATION OF WATER-SOLUBLE SALTS |
I.S. EN ISO 8871-2:2004 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003) |
EN ISO 2810:2004 | Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004) |
UNI EN ISO 660 : 2009 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ACID VALUE AND ACIDITY |
EN ISO 4619:2010 | Driers for paints and varnishes (ISO 4619:1998) |
EN ISO 8502-9:2000 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998) |
I.S. EN ISO 8655-6:2002 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR |
EN ISO 28158:2010 | Dentistry - Integrated dental floss and handles (ISO 28158:2010) |
EN ISO 11905-1:1998 | Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate (ISO 11905-1:1997) |
EN ISO 5402-2:2015 | Leather - Determination of flex resistance - Part 2: Vamp flex method (ISO 5402-2:2015) |
EN 16801:2016 | Foodstuffs - Determination of elements and their chemical species - Determination of methylmercury in foodstuffs of marine origin by isotope dilution GC-ICP-MS |
EN 16328:2012 | Fertilizers - Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP) - Method using high-performance liquid chromatography (HPLC) |
EN 14880:2005 | Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method |
EN ISO 9020 : 1998 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF FREE-FORMALDEHYDE CONTENT OF AMINO RESINS - SODIUM SULFITE TITRIMETRIC METHOD |
EN ISO 105-C10:2007 | Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda (ISO 105-C10:2006) |
EN ISO 11206:2013 | Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011) |
EN ISO 20783-2:2003 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003) |
EN ISO 8502-2:2017 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017) |
EN 15933:2012 | Sludge, treated biowaste and soil - Determination of pH |
EN 14148:2003 | Foodstuffs - Determination of vitamin K1 by HPLC |
EN ISO 16264:2004 | Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection (ISO 16264:2002) |
EN ISO 4629-2:2016 | Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst (ISO 4629-2:2016) |
EN 15950:2010 | Fertilizers - Determination of N-(1,2-dicarboxyethyl)-D,L-aspartic acid (Iminodisuccinic acid, IDHA) using high-performance liquid chromatography (HPLC) |
EN ISO 27108:2013 | Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 27108:2010) |
EN ISO 20541:2008 | Milk and milk products - Determination of nitrate content - Method by enzymatic reduction and molecular-absorption spectrometry after Griess reaction (ISO 20541:2008) |
EN ISO 16373-3:2014 | Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) (ISO 16373-3:2014) |
EN 1408:2008 | Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride) |
EN ISO 9694 : 1998 | DENTAL PHOSPHATE-BONDED CASTING INVESTMENTS |
EN 15891:2010 | Foodstuffs - Determination of deoxynivalenol in cereals, cereal products and cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and UV detection |
EN ISO 3826-4:2015 | Plastics collapsible containers for human blood and blood components - Part 4: Aphaeresis blood bag systems with integrated features (ISO 3826-4:2015) |
EN ISO 15329:2008 | Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys (ISO 15329:2006) |
EN ISO 15141-2:1998 | Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 2: High performance liquid chromatographic method with bicarbonate clean up (ISO 15141-2:1998) |
EN ISO 16744:2003 | Dentistry - Base metal materials for fixed dental restorations (ISO 16744:2003) |
EN 16693:2015 | Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS) |
EN 13763-12:2003 | Explosives for civil uses - Detonators and relays - Part 12:Determination of resistance to hydrostatic pressure |
EN 14621:2005 | Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns |
EN ISO 5164:2014 | Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014) |
EN 15028:2012 | Chemicals used for treatment of water intended for human consumption - Sodium chlorate |
EN ISO 10693:2014 | Soil quality - Determination of carbonate content - Volumetric method (ISO 10693:1995) |
EN 14371:2004 | Surface active agents - Determination of foamability and degree of foamability - Circulation test method |
EN ISO 15320:2011 | Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011) |
EN ISO 15680:2003 | Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003) |
EN 2435-002:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance |
EN ISO 12228-1:2014 | Determination of individual and total sterols contents - Gas chromatographic method - Part 1: Animal and vegetable fats and oils (ISO 12228-1:2014) |
EN 1430:2009 | Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions |
EN ISO 2495:2000 | Iron blue pigments - Specifications and methods of test (ISO 2495:1995) |
EN ISO 14565:2000 | Animal feeding stuffs - Determination of vitamin A content - Method using high-performance liquid chromatography (ISO 14565:2000) |
EN 2435-004:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance |
EN 2434-002:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 002: High chemical resistance |
EN ISO 4629-1:2016 | Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without using a catalyst (ISO 4629-1:2016) |
EN ISO 9963-1:1995 | Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity (ISO 9963-1:1994) |
UNI EN ISO 21627-3 : 2009 | PLASTICS - EPOXY RESINS - DETERMINATION OF CHLORINE CONTENT - PART 3: TOTAL CHLORINE |
UNI EN 13177 : 2010 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - METHANOL |
UNI EN 12386 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE |
UNI EN ISO 16373-2 : 2014 | TEXTILES - DYESTUFFS - PART 2: GENERAL METHOD FOR THE DETERMINATION OF EXTRACTABLE DYESTUFFS INCLUDING ALLERGENIC AND CARCINOGENIC DYESTUFFS (METHOD USING PYRIDINE-WATER) |
UNI CEN/TS 16201 : 2013 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF VIABLE PLANT SEEDS AND PROPAGULES |
UNI EN 1197 : 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MONOZINC PHOSPHATE SOLUTION |
UNI EN 12490 : 2010 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - PRESERVATIVE-TREATED SOLID WOOD - DETERMINATION OF THE PENETRATION AND RETENTION OF CREOSOTE IN TREATED WOOD |
UNI EN 12120 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN SULFITE |
UNI EN ISO 3107 : 2011 | DENTISTRY - ZINC OXIDE/EUGENOL AND ZINC OXIDE/NON-EUGENOL CEMENTS |
UNI EN ISO 11846 : 2008 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF SOLUTION HEAT-TREATABLE ALUMINIUM ALLOYS |
UNI EN ISO 21627-2 : 2009 | PLASTICS - EPOXY RESINS - DETERMINATION OF CHLORINE CONTENT - PART 2: EASILY SAPONIFIABLE CHLORINE |
UNI EN 12847 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS |
UNI EN 1014-4 : 2010 | WOOD PRESERVATIVES - CREOSOTE AND CREOSOTED TIMBER - METHODS OF SAMPLING AND ANALYSIS - PART 4: DETERMINATION OF THE WATER-EXTRACTABLE PHENOLS CONTENT OF CREOSOTE |
UNI EN 12173 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM FLUORIDE |
UNI EN ISO 105-E01 : 2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER |
ONORM EN 15933 : 2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF PH |
UNI EN 12848 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
UNI EN 1409 : 2008 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POLYAMINES |
UNI EN 14133 : 2009 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN WINE AND BEER - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEAN-UP |
UNI EN 12822 : 2014 | FOODSTUFFS - DETERMINATION OF VITAMIN E BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MEASUREMENT OF ALPHA-, BETA-, GAMMA- AND DELTA- TOCOPHEROL |
UNI EN ISO 2811-3 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 3: OSCILLATION METHOD |
UNI EN ISO 2870 : 2009 | SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF ANIONIC-ACTIVE MATTER HYDROLYSABLE AND NON-HYDROLYSABLE UNDER ACID CONDITIONS |
UNI EN ISO 20843 : 2011 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CATEGORIES HFAE, HFAS AND HFC |
UNI CEN/TS 16177 : 2012 | Sludge, treated organic waste and soil - Extraction for the determination of extractable ammonia, nitrates and nitrites |
UNI EN 15195 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
UNI EN 1408 : 2008 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - POLY (DIALLYLDIMETHYLAMMONIUM CHLORIDE) |
UNI EN ISO 105-E02 : 2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER |
UNI EN 12915-1 : 2009 | PRODUCTS USED FOR THE TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - GRANULAR ACTIVATED CARBON - PART 1: VIRGIN GRANULAR ACTIVATED CARBON |
UNI EN ISO 105-B02 : 2014 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST |
UNI EN ISO 10304-1 : 2009 | WATER QUALITY - DETERMINATION OF DISSOLVED ANIONS BY LIQUID CHROMATOGRAPHY OF IONS - PART 1: DETERMINATION OF BROMIDE, CHLORIDE, FLUORIDE, NITRATE, NITRITE, PHOSPHATE AND SULFATE |
UNI EN ISO 14184-1 : 2011 | TEXTILES - DETERMINATION OF FORMALDEHYDE - PART 1: FREE AND HYDROLYSED FORMALDEHYDE (WATER EXTRACTION METHOD) |
ENV 14226:2002 | Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES) |
UNI EN 12174 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE |
UNI CEN/TS 15862 : 2012 | CHARACTERISATION OF WASTE - COMPLIANCE LEACHING TEST - ONE STAGE BATCH LEACHING TEST FOR MONOLITHS AT FIXED LIQUID TO SURFACE AREA RATIO (L/A) FOR TEST PORTIONS WITH FIXED MINIMUM DIMENSIONS |
UNI EN ISO 10993-15 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 15: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM METALS AND ALLOYS |
UNI EN 899 : 2009 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SULPHURIC ACID |
UNI EN ISO 11644 : 2009 | LEATHER - TEST FOR ADHESION OF FINISH |
UNI EN ISO 11642 : 2013 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER |
EN ISO 16187:2013 | Footwear and footwear components - Test method to assess antibacterial activity (ISO 16187:2013) |
UNI EN 1410 : 2008 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CATIONIC POLYACRYLAMIDES |
UNI EN ISO 15212-1 : 2000 | OSCILLATION-TYPE DENSITY METERS - LABORATORY INSTRUMENTS |
UNI EN ISO 13934-2 : 2014 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD |
UNI EN 14122 : 2014 | FOODSTUFFS - DETERMINATION OF VITAMIN B1 BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
UNI EN 14152 : 2014 | FOODSTUFFS - DETERMINATION OF VITAMIN B2 BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
UNI EN 900 : 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM HYPOCHLORITE |
UNI EN ISO 9167-1 : 2013 | RAPESEED - DETERMINATION OF GLUCOSINOLATES CONTENT - PART 1: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
ENV 14029:2001 | Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix |
UNI EN 12911 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MANGANESE GREENSAND |
EN ISO 10280 : 1995 | STEEL AND IRON - DETERMINATION OF TITANIUM CONTENT - DIANTIPYRYLMETHANE SPECTROPHOTOMETRIC METHOD |
I.S. EN ISO 8655-4:2002 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 4: DILUTORS |
UNI EN ISO 11609 : 2010 | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING |
UNI EN 897 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CARBONATE |
UNI EN ISO 10321 : 2008 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
UNI EN 1245 : 2011 | ADHESIVES - DETERMINATION OF PH |
UNI EN 1240 : 2011 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
UNI EN ISO 17075 : 2008 | LEATHER - CHEMICAL TESTS - DETERMINATION OF CHROMIUM (6) CONTENT |
UNI EN ISO 11997-2 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
UNI EN ISO 9917-1 : 2008 | DENTISTRY - WATER-BASED CEMENTS - PART 1: POWDER/LIQUID ACID-BASE CEMENTS |
UNI EN ISO 20541 : 2009 | MILK AND MILK PRODUCTS - DETERMINATION OF NITRATE CONTENT - METHOD BY ENZYMATIC REDUCTION AND MOLECULAR-ABSORPTION SPECTROMETRY AFTER GRIESS REACTION |
UNI EN 1421 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM CHLORIDE |
UNI EN 12175 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HEXAFLUOROSILICIC ACID |
UNI EN ISO 3093 : 2010 | WHEAT, RYE AND THEIR FLOURS, DURUM WHEAT AND DURUM WHEAT SEMOLINA - DETERMINATION OF THE FALLING NUMBER ACCORDING TO HAGBERG-PERTEN |
EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
UNI EN ISO 7887 : 2012 | WATER QUALITY - EXAMINATION AND DETERMINATION OF COLOUR |
UNI EN ISO 11885 : 2009 | WATER QUALITY - DETERMINATION OF SELECTED ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
UNI EN 901 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYPOCHLORITE |
UNI EN 12123 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE |
UNI EN 12596 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY BY VACUUM CAPILLARY |
UNI EN ISO 5163 : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
UNI EN 12821 : 2009 | FOODSTUFFS - DETERMINATION OF VITAMIN D BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MEASUREMENT OF CHOLECALCIFEROL (D3) OR ERGOCALCIFEROL (D2) |
UNI EN 12594 : 2015 | BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
UNI EN ISO 105-C08 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW-TEMPERATURE BLEACH ACTIVATOR |
UNI EN ISO 8655-6 : 2005 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR |
UNI EN 12125 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM THIOSULFATE |
UNI EN ISO 10993-14 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 14: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM CERAMICS |
UNI EN 12121 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM DISULFITE |
UNI EN ISO 11127-7 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 7: DETERMINATION OF WATER-SOLUBLE CHLORIDES |
UNI EN 890 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) SULFATE SOLUTION |
UNI EN 118 : 2014 | WOOD PRESERVATIVES - DETERMINATION OF PREVENTIVE ACTION AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
UNI EN 1430 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS |
UNI EN ISO 10993-13 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 13: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM POLYMERIC MEDICAL DEVICES |
UNI EN ISO 8799 : 2009 | SURFACE ACTIVE AGENTS - SULFATED ETHOXYLATED ALCOHOLS AND ALKYLPHENOLS - DETERMINATION OF CONTENT OF UNSULFATED MATTER |
ISO 14362-1:2017 | Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres |
UNI EN ISO 6873 : 2013 | DENTISTRY - GYPSUM PRODUCTS |
UNI EN ISO 105-E03 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER) |
UNI EN 13368-1 : 2014 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS IN FERTILIZERS BY CHROMATOGRAPHY - PART 1: DETERMINATION OF EDTA, HEEDTA AND DTPA BY ION CHROMATOGRAPHY |
UNI EN 14668 : 2005 | SURFACE ACTIVE AGENTS - DETERMINATION OF QUATERNARY AMMONIUM SURFACE ACTIVE AGENTS IN RAW MATERIALS AND FORMULATED PRODUCTS - POTENTIOMETRIC TWO-PHASE TITRATION METHOD |
UNI EN 13037 : 2012 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PH |
UNI EN 1407 : 2008 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANIONIC AND NON-IONIC POLYACRYLAMIDES |
UNI EN ISO 15586 : 2004 | WATER QUALITY - DETERMINATION OF TRACE ELEMENTS USING ATOMIC ABSORPTION SPECTROMETRY WITH GRAPHITE FURNACE |
UNI EN ISO 11641 : 2013 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO PERSPIRATION |
UNI EN 898 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN CARBONATE |
UNI EN ISO 8655-4 : 2005 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 4: DILUTORS |
UNI EN 16086-1 : 2012 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PLANT RESPONSE - PART 1: POT GROWTH TEST WITH CHINESE CABBAGE |
UNI EN 1014-3 : 2010 | WOOD PRESERVATIVES - CREOSOTE AND CREOSOTED TIMBER - METHODS OF SAMPLING AND ANALYSIS - PART 3: DETERMINATION OF THE BENZO(A)PYRENE CONTENT OF CREOSOTE |
UNI EN 12126 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - LIQUEFIED AMMONIA |
UNI EN 1429 : 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
UNI EN ISO 3823-2 : 2008 | DENTISTRY - ROTARY BUR INSTRUMENTS - PART 2: FINISHING BURS |
UNI EN ISO 105-C06 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING |
UNI EN 1405 : 2009 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM ALGINATE |
ENV 14138:2001 | Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation by co-precipitation |
UNI EN 1428 : 2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
UNI EN 14132 : 2009 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN BARLEY AND ROASTED COFFEE - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEAN-UP |
EN 12137:1997 | Fruit and vegetable juices - Determination of tartaric acid in grape juices - Method by high performance liquid chromatography |
UNI EN ISO 105-E12 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING |
UNI EN 12850 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMINOUS EMULSIONS |
UNI EN 12912 : 2013 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - BARITE |
UNI EN ISO 11127-6 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 6: DETERMINATION OF WATER-SOLUBLE CONTAMINANTS BY CONDUCTIVITY MEASUREMENT |
UNI EN ISO 105-A01 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING |
UNI EN ISO 15320 : 2011 | PULP, PAPER AND BOARD - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT |
UNI EN ISO 10523 : 2012 | WATER QUALITY - DETERMINATION OF PH |
IP 486 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
UNI EN 117 : 2013 | WOOD PRESERVATIVES - DETERMINATION OF TOXIC VALUES AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
EN 1200:2005 | Chemicals used for treatment of water intended for human consumption - Trisodium orthophosphate |
EN 16691:2015 | Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS) |
EN 2434-004:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 004: High flexibility |
UNI EN ISO 8655-7 : 2006 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE ASSESSMENT OF EQUIPMENT PERFORMANCE |
EN ISO 15351:2010 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
EN ISO 21078-2:2007 | Determination of boron(III) oxide in refractory products - Part 2: Acid extraction method for the determination of boron(III) oxide in binder components (ISO 21078-2:2006) |
UNI EN ISO 8655-2 : 2004 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 2: PISTON PIPETTES |
UNI EN ISO 20783-1 : 2011 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF EMULSION STABILITY OF FIRE-RESISTANT FLUIDS - PART 1: FLUIDS IN CATEGORY HFAE |
UNI EN ISO 5764 : 2009 | MILK - DETERMINATION OF FREEZING POINT - THERMISTOR CRYOSCOPE METHOD (REFERENCE METHOD) |
UNI EN ISO 14896 : 2009 | PLASTICS - POLYURETHANE RAW MATERIALS - DETERMINATION OF ISOCYANATE CONTENT |
EN 16159:2012 | Animal feeding stuffs - Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) |
UNI EN ISO 2811-4 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 4: PRESSURE CUP METHOD |
UNI EN 1644-1 : 1997 | TEST METHODS FOR NONWOVEN COMPRESSES FOR MEDICAL USE - PART 1: NONWOVENS USED IN THE MANUFACTURE OF COMPRESSES |
UNI EN ISO 8655-5 : 2005 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 5: DISPENSERS |
UNI EN 13890 : 2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
UNI EN 896 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROXIDE |
UNI EN 16502 : 2014 | TEST METHOD FOR THE DETERMINATION OF THE DEGREE OF SOIL ACIDITY ACCORDING TO BAUMANN-GULLY |
UNI EN 1243 : 2011 | ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
UNI EN 1278 : 2010 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - OZONE |
UNI EN ISO 4404-1 : 2013 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS |
UNI EN 12823-1 : 2014 | FOODSTUFFS - DETERMINATION OF VITAMIN A BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - PART 1: MEASUREMENT OF ALL-E-RETINOL AND 13-Z-RETINOL |
UNI EN ISO 15193 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
UNI EN ISO 11143 : 2008 | DENTISTRY - AMALGAM SEPARATORS |
UNI EN 12595 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
UNI EN 13752 : 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MANGANESE DIOXIDE |
BS 4140-14:1997 | Methods of test for aluminium oxide Determination of calcium content |
UNI EN ISO 21627-1 : 2009 | PLASTICS - EPOXY RESINS - DETERMINATION OF CHLORINE CONTENT - PART 1: INORGANIC CHLORINE |
UNI EN ISO 10319 : 2008 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST |
UNI EN 973 : 2009 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORIDE FOR REGENERATION OF ION EXCHANGERS |
I.S. EN ISO 21606:2007 | DENTISTRY - ELASTOMERIC AUXILIARIES FOR USE IN ORTHODONTICS |
UNI EN ISO 14184-2 : 2011 | TEXTILES - DETERMINATION OF FORMALDEHYDE - PART 2: RELEASED FORMALDEHYDE (VAPOUR ABSORPTION METHOD) |
UNI EN 14480 : 2005 | SURFACE ACTIVE AGENTS - DETERMINATION OF ANIONIC SURFACE ACTIVE AGENTS - POTENTIOMETRIC TWO-PHASE TITRATION METHOD |
UNI EN ISO 105-E07 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER |
UNI EN ISO 105-E04 : 2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION |
UNI EN ISO 105-E09 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING |
UNI EN 14123 : 2008 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B1 AND THE SUM OF AFLATOXIN B1, B2, G1 AND G2 IN HAZELNUTS, PEANUTS, PISTACHIOS, FIGS AND PAPRIKA POWDER - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST-COLUMN DERIVATISATION AND IMMUNOAFFINITY COLUMN CLEANUP |
UNI EN ISO 5164 : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
UNI EN ISO 8655-3 : 2005 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 3: PISTON BURETTES |
UNI EN 13038 : 2012 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
UNI EN ISO 13934-1 : 2013 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD |
UNI EN 14362-1 : 2012 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 1: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE WITH AND WITHOUT EXTRACTING THE FIBRES |
UNI EN 12124 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM SULFITE |
UNI EN ISO 16784-2 : 2008 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG |
UNI EN ISO 2871-2 : 2010 | SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF CATIONIC-ACTIVE MATTER CONTENT - PART 2: CATIONIC-ACTIVE MATTER OF LOW MOLECULAR MASS (BETWEEN 200 AND 500) |
I.S. EN ISO 8655-5:2002 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 5: DISPENSERS |
UNE-EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
DIN EN 15792:2009-12 | Animal feeding stuffs - Determination of zearalenone in animal feed - High performance liquid chromatographic method with fluorescence detection and immunoaffinity column clean-up |
UNE-EN 16037:2013 | Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfate |
UNE-EN 14362-3:2012 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene |
UNE-EN 15891:2011 | Foodstuffs - Determination of deoxynivalenol in cereals, cereal products and cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and UV detection |
UNE-EN ISO 15181-6:2014 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract (ISO 15181-6:2012) |
ISO 20179:2005 | Water quality — Determination of microcystins — Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection |
DIN EN 14166:2009-09 | Foodstuffs - Determination of vitamin B<(Index)6> by microbiological assay |
DIN EN ISO 17075-2 E : 2017 | LEATHER - CHEMICAL DETERMINATION OF CHROMIUM(6) CONTENT IN LEATHER - PART 2: CHROMATOGRAPHIC METHOD (ISO 17075-2:2017) |
04/30126437 DC : DRAFT DEC 2004 | EN 15109 - SURFACE ACTIVE AGENTS - DETERMINATION OF THE ACTIVE MATTER CONTENT OF ALKYLAMIDOPROPYLBETAINES |
ONORM EN ISO 17678 : 2010 | MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
EN ISO 2812-1:2017 | Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017) |
UNI EN 15845 : 2010 | PAPER AND BOARD - DETERMINATION OF THE CYTOTOXICITY OF AQUEOUS EXTRACTS |
UNI EN 15950 : 2010 | FERTILIZERS - DETERMINATION OF N-(1,2-DICARBOXYETHYL)-D,L-ASPARTIC ACID (IMINODISUCCINIC ACID, IDHA) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
12/30238184 DC : 0 | BS EN ISO 28888 - DENTISTRY - SCREENING METHOD FOR EROSION POTENTIAL OF ORAL RINSES ON DENTAL HARD TISSUES |
11/30240486 DC : 0 | BS EN 16256-5 - PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS |
CEN ISO/TS 21268-4:2009 | Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 4: Influence of pH on leaching with initial acid/base addition (ISO/TS 21268-4:2007) |
14/30311300 DC : 0 | BS EN ISO 2811-1 - PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 1: PYCNOMETER METHOD |
BS ISO 7203-2:1995 | Fire extinguishing media. Foam concentrates Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids |
ISO/TS 17073:2013 | Soil quality Determination of trace elements in aqua regia and nitric acid digests Graphite furnace atomic absorption spectrometry method (GFAAS) |
BS EN ISO 17072-1:2011 | Leather. Chemical determination of metal content Extractable metals |
UNE-EN ISO 14189:2017 | Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration (ISO 14189:2013) |
I.S. EN 16858:2017 | FOODSTUFFS - DETERMINATION OF MELAMINE AND CYANURIC ACID IN FOODSTUFFS BY LIQUID CHROMATOGRAPHY AND TANDEM MASS SPECTROMETRY (LC-MS/MS) |
BS EN ISO 28399:2011 | Dentistry. Products for external tooth bleaching |
BS EN 16128:2015 | Ophthalmic optics. Reference method for the testing of spectacle frames and sunglasses for nickel release |
BS EN ISO 17226-1:2008 | Leather. Chemical determination of formaldehyde content Method using high performance liquid chromatography |
07/30169170 DC : 0 | BS ISO 28706-4 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL |
06/30147354 DC : DRAFT MAR 2006 | EN 15487 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD |
DIN EN 16087-1:2012-01 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF THE AEROBIC BIOLOGICAL ACTIVITY - PART 1: OXYGEN UPTAKE RATE (OUR) |
ISO 11349:2010 | Water quality Determination of low-volatility lipophilic substances Gravimetric method |
DIN ISO 10390 E : 1997 | SOIL QUALITY - DETERMINATION OF PH |
DIN EN ISO 14403-1:2012-10 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA); (ISO 14403-1:2012) |
DIN EN 14405:2017-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
UNI EN ISO 17489 : 2014 | LEATHER - CHEMICAL TESTS - DETERMINATION OF TAN CONTENT IN SYNTHETIC TANNING AGENTS |
UNI EN ISO 15329 : 2008 | CORROSION OF METALS AND ALLOYS - ANODIC TEST FOR EVALUATION OF INTERGRANULAR CORROSION SUSCEPTIBILITY OF HEAT- TREATABLE ALUMINIUM ALLOYS |
10/30234561 DC : 0 | BS EN 16204 - FOODSTUFFS - DETERMINATION OF LIPOPHILIC ALGAL TOXINS (DSP-TOXINS, YESSOTOXINS, AZASPIRACIDS, PECTENOTOXINS) IN SHELLFISH AND SHELLFISH PRODUCTS BY LC-MS/MS |
I.S. EN 16086-2:2011 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PLANT RESPONSE - PART 2: PETRI DISH TEST USING CRESS |
DIN EN ISO 16373-3 E : 2014 | TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARCINOGENIC DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) (ISO 16373-3:2014) |
ISO/TS 16727:2013 | Soil quality — Determination of mercury — Cold vapour atomic fluorescence spectrometry (CVAFS) |
BIS IS/ISO 105-E07 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER |
13/30259628 DC : 0 | BS ISO 14388-3 - SOIL QUALITY - ACID-BASE ACCOUNTING PROCEDURE FOR ACID SULFATE SOILS - PART 3: SUSPENSION PEROXIDE OXIDATION COMBINED ACIDITY AND SULFUR (SPOCAS) METHODOLOGY |
16/30338108 DC : DRAFT JULY 2016 | BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
BS 2000-236(2005) : 2005 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
CSA C22.2 No. 60601.2.24 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-24: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFUSION PUMPS AND CONTROLLERS |
BS ISO 6495-1:2015 | Animal feeding stuffs. Determination of water-soluble chlorides content Titrimetric method |
15/30282343 DC : 0 | BS ISO 18746 - TRADITIONAL CHINESE MEDICINE - INTRADERMAL ACUPUNCTURE NEEDLES |
DIN EN 16619:2015-06 | FOOD ANALYSIS - DETERMINATION OF BENZO[A]PYRENE, BENZ[A]ANTHRACENE, CHRYSENE AND BENZO[B]FLUORANTHENE IN FOODSTUFFS BY GAS CHROMATOGRAPHY MASS SPECTROMETRY (GC-MS) |
DIN EN 16159:2012-04 | Animal feeding stuffs - Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) |
ISO 18089:2015 | Corrosion of metals and alloys Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control |
05/30117337 DC : DRAFT JUL 2005 | EN 725-1 - ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 1: DETERMINATION OF IMPURITIES IN ALUMINA |
UNI EN ISO 5403-2 : 2012 | LEATHER - DETERMINATION OF WATER RESISTANCE OF FLEXIBLE LEATHER - PART 2: REPEATED ANGULAR COMPRESSION (MAESER) |
UNI EN ISO 20795-2 : 2013 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS |
ISO 7783:2011 | Paints and varnishes Determination of water-vapour transmission properties Cup method |
09/30199086 DC : DRAFT JAN 2009 | BS EN ISO 105-C08 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR |
00/562029 DC : DRAFT MAY 2000 | ISO 17190-5 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 5: GRAVIMETRIC DETERMINATION OF FREE SWELL CAPACITY IN SALINE |
DD CEN/TS 14418:2005 | Geosynthetic barriers. Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers |
BS EN ISO 12846:2012 | Water quality. Determination of mercury. Method using atomic absorption spectrometry (AAS) with and without enrichment |
08/30189225 DC : DRAFT DEC 2008 | BS EN ISO 7783 - PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD |
17/30361509 DC : 0 | BS EN ISO 9167 - RAPESEED - DETERMINATION OF GLUCOSINOLATES CONTENT - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
BS 6068-2.85(2003) : 2003 | WATER QUALITY - GAS-CHROMATOGRAPHIC DETERMINATION OF A NUMBER OF MONOCYCLIC AROMATIC HYDROCARBONS, NAPHTHALENE AND SEVERAL CHLORINATED COMPOUNDS USING PURGE-AND-TRAP AND THERMAL DESORPTION |
BS EN 15751:2014 | Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method |
15/30324378 DC : 0 | BS EN 12485 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE AND CALCIUM MAGNESIUM CARBONATE - TEST METHODS |
DIN EN ISO 12782-2:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite (ISO 12782-2:2012) |
BS 6068-2.76(2002) : 2002 | WATER QUALITY - DIGESTION FOR THE DETERMINATION OF SELECTED ELEMENTS IN WATER - AQUA REGIA DIGESTION |
13/30238570 DC : 0 | BS ISO 16533 - TEXTILES - MEASUREMENT OF EXOTHERMIC AND ENDOTHERMIC PROPERTIES OF TEXTILES UNDER HUMIDITY CHANGE |
DIN EN 15621:2016-11 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
14/30287143 DC : 0 | BS EN ISO 8623 - TALL-OIL FATTY ACIDS FOR PAINTS AND VARNISHES - TEST METHODS AND CHARACTERISTIC VALUES |
DIN EN ISO 4946:2016-08 | STEEL AND CAST IRON - DETERMINATION OF COPPER - 2,2'-BIQUINOLINE SPECTROPHOTOMETRIC METHOD (ISO 4946:2016) |
I.S. EN 15062:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
BS EN 15688:2008 | Fertilizers. Determination of urease inhibitor N-(n-butyl)thiophosphoric triamide (NBPT) using high-performance liquid chromatography (HPLC) |
03/317746 DC : DRAFT OCT 2003 | EN 48 - WOOD PRESERVATIVES - DETERMINATION OF THE ERADICANT ACTION AGAINST LARVAE OF ANOBIUM PUNCTATUM (DE GEER) (LABORATORY METHOD) |
14/30285169 DC : 0 | BS EN ISO 15912 - DENTISTRY - REFRACTORY INVESTMENT AND DIE MATERIAL |
I.S. EN 60754-1:2014 | TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 1: DETERMINATION OF THE HALOGEN ACID GAS CONTENT |
I.S. EN 13506:2002 | WATER QUALITY - DETERMINATION OF MERCURY BY ATOMIC FLUORESCENCE SPECTROMETRY |
08/30168847 DC : DRAFT JULY 2008 | BS EN ISO 9917-2 - DENTISTRY - WATER-BASED CEMENTS - PART 2: RESIN-MODIFIED CEMENTS |
06/30146278 DC : DRAFT FEB 2006 | ISO 17678 - MILK FAT - DETECTION OF FOREIGN FATS BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
BS EN ISO 6271:2015 | Clear liquids. Estimation of colour by the platinum-cobalt colour scale |
PD CEN/TS 16637-3:2016 | Construction products. Assessment of release of dangerous substances Horizontal up-flow percolation test |
DD ISO/TS 17576:2004 | Dentistry. Corrosion tests for amalgam |
17/30319520 DC : 0 | BS ISO 20289 - SURFACE CHEMICAL ANALYSIS - TOTAL REFLECTION X-RAY FLUORESCENCE ANALYSIS OF WATER SAMPLES |
14/30264743 DC : 0 | BS ISO 18066 - TEXTILES - MANMADE FILAMENT YARNS - DETERMINATION OF SHRINKAGE IN BOILING WATER |
UNI EN 15769 : 2009 | ETHANOL AS A BLENDING COMPONENT OF PETROL - DETERMINATION OF APPEARANCE - VISUAL METHOD |
UNI ISO 15586 : 2009 | WATER QUALITY - DETERMINATION OF TRACE ELEMENTS USING ATOMIC ABSORPTION SPECTROMETRY WITH GRAPHITE FURNACE |
13/30283361 DC : 0 | BS EN ISO 19074 - LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF WATER ABSORPTION BY CAPILLARY ACTION (WICKING) |
13/30275852 DC : 0 | BS EN ISO 10319 - GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST |
09/30202720 DC : DRAFT JUNE 2009 | BS EN 15962 - FERTILIZERS - DETERMINATION OF THE COMPLEXED MICRO-NUTRIENT CONTENT AND OF THE COMPLEXED FRACTION OF MICRO-NUTRIENTS |
UNI EN 1911 : 2010 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF GASEOUS CHLORIDES EXPRESSED AS HCL - STANDARD REFERENCE METHOD |
18/30372409 DC : DRAFT APR 2018 | BS EN ISO 3630-1 - DENTISTRY - ENDODONTIC INSTRUMENTS - PART 1: GENERAL REQUIREMENTS |
09/30195759 DC : 0 | BS ISO 11704 - WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD |
DIN EN 15749:2010-02 | Fertilizers - Determination of sulfates content using three different methods |
09/30208725 DC : 0 | BS EN 13037 - SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PH |
BS 6782-16.3(2000) : 2000 AMD 15240 | BINDERS FOR PAINTS AND VARNISHES - PART 16: METHODS OF TEST FOR ALKYD RESINS - SECTION 16.3: DETERMINATION OF UNSAPONIFIABLE MATTER CONTENT |
UNI EN ISO 15234 : 2011 | PAINTS AND VARNISHES - TESTING OF FORMALDEHYDE-EMITTING COATINGS AND MELAMINE FOAMS - DETERMINATION OF THE STEADY-STATE CONCENTRATION OF FORMALDEHYDE IN A SMALL TEST CHAMBER |
BS 7077-1.1(1993) : AMD 8364 | DENTAL HANDPIECES AND ACCESSORIES - HANDPIECES - SPECIFICATION FOR HIGH SPEED AIR TURBINE HANDPIECES |
10/30196530 DC : 0 | BS ISO 5814 - WATER QUALITY - DETERMINATION OF DISSOLVED OXYGEN - ELECTROCHEMICAL PROBE METHOD |
BS 6782-15(1997) : 1997 | BINDERS FOR PAINTS - SPECIFICATIONS AND TEST METHODS FOR TALL-OIL FATTY ACIDS |
06/30149732 DC : DRAFT APR 2006 | ISO 8070 - MILK AND MILK PRODUCTS - DETERMINATION OF CALCIUM, SODIUM, POTASSIUM AND MAGNESIUM CONTENTS - ATOMIC ABSORPTION SPECTROMETRIC METHOD |
UNI EN ISO 16591 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD |
UNI ISO 11885 : 2009 | WATER QUALITY - DETERMINATION OF SELECTED ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
03/307376 DC : DRAFT MAY 2003 | EN 47 - WOOD PRESERVATIVES - DETERMINATION OF THE TOXIC VALUES AGAINST LARVAE OF HYLOTRUPES BAJULUS (LINNAEUS) (LABORATORY METHOD) |
BS EN ISO 18218-1:2015 | Leather. Determination of ethoxylated alkylphenols Direct method |
DIN ISO 22743:2015-08 | WATER QUALITY - DETERMINATION OF SULFATES - METHOD BY CONTINUOUS FLOW ANALYSIS (CFA) (ISO 22743:2006 + COR. 1:2007) |
UNI EN ISO 5529 : 2010 | WHEAT - DETERMINATION OF THE SEDIMENTATION INDEX - ZELENY TEST |
BS 3900-F19(2000) : 2000 AMD 16874 | METHODS OF TEST FOR PAINT - DURABILITY TESTS ON PAINT FILMS - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
03/300544 DC : DRAFT FEB 2003 | EN 888 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) CHLORIDE |
UNI EN ISO 14403-1 : 2013 | WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE USING FLOW ANALYSIS (FIA AND CFA) - PART 1: METHOD USING FLOW INJECTION ANALYSIS (FIA) |
DIN EN ISO 28706-2:2016-04 (Draft) | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS (ISO 28706-2:2017) |
I.S. EN 15626:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
BS ISO 15324 : 2000 | CORROSION OF METALS AND ALLOYS - EVALUATION OF STRESS CORROSION CRACKING BY THE DROP EVAPORATION TEST |
BS EN 15782:2009 | Animal feeding stuffs. Determination of nicarbazin. High-performance liquid chromatographic method |
14/30276366 DC : 0 | BS EN ISO 4946 - STEEL AND CAST IRON - DETERMINATION OF COPPER CONTENT - 2,2'-DIQUINOLYL SPECTROPHOTOMETRIC METHOD |
12/30262112 DC : 0 | BS EN ISO 17070 - LEATHER - CHEMICAL TESTS - DETERMINATION OF TETRACHLOROPHENOL-, TRICHLOROPHENOL-, DICHLOROPHENOL-, MONOCHLOROPHENOL-ISOMERS AND PENTCHLOROPHENOL CONTENT |
NF EN ISO 105 E03 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER) |
10/30168824 DC : 0 | BS EN ISO 6876 - DENTISTRY - ROOT CANAL SEALING MATERIALS |
BS ISO 3093 : 2004 AMD 17028 | WHEAT, RYE AND RESPECTIVE FLOURS, DURUM WHEAT AND DURUM WHEAT SEMOLINA - DETERMINATION OF THE FALLING NUMBER ACCORDING TO HAGBERG-PERTEN |
BS ISO 5529 : 2007 | WHEAT - DETERMINATION OF THE SEDIMENTATION INDEX - ZELENY TEST |
BS EN 15835:2010 | Foodstuffs. Determination of ochratoxin A in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection |
12/30228371 DC : 0 | BS ISO 15625 - PROTEIN FIBRES - ELECTRONIC TEST METHOD FOR DEFECTS AND EVENNESS OF RAW SILK |
BS EN ISO 4629-2:2016 | Binders for paints and varnishes. Determination of hydroxyl value Titrimetric method using a catalyst |
10/30235110 DC : 0 | BS EN ISO 11641 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO PERSPIRATION |
I.S. EN 15863:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED CONDITIONS |
NF EN ISO 10873 : 2010 | DENTISTRY - DENTURE ADHESIVES |
BS ISO 6588-2:2012 | Paper, board and pulps. Determination of pH of aqueous extracts Hot extraction |
13/30277750 DC : 0 | BS ISO 9697 - WATER QUALITY - MEASUREMENT OF GROSS BETA ACTIVITY IN NON-SALINE WATER - THICK SOURCE METHOD |
BS ISO 6732:2010 | Milk and milk products. Determination of iron content. Spectrometric method (Reference method) |
09/30196706 DC : DRAFT DEC 2009 | BS ISO 2811-3 - PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 3: OSCILLATION METHOD |
UNI EN ISO 5398-2 : 2009 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 2: QUANTIFICATION BY COLORIMETRIC DETERMINATION |
DIN ISO 20280:2010-05 | Soil quality - Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry (ISO 20280:2007) |
I.S. EN ISO 17075:2008 | LEATHER - CHEMICAL TESTS - DETERMINATION OF CHROMIUM(6) CONTENT |
NF EN ISO 16050 : 2011 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B1, AND THE TOTAL CONTENT OF AFLATOXINS B1, B2, G1 AND G2 IN CEREALS, NUTS AND DERIVED PRODUCTS - HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
I.S. EN 15195:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
BS ISO 20370:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of acetate content |
CEI EN 62321-7-2 : 1ED 2017 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 7-2: HEXAVALENT CHROMIUM - DETERMINATION OF HEXAVALENT CHROMIUM (CR(6)) IN POLYMERS AND ELECTRONICS BY THE COLORIMETRIC METHOD |
I.S. EN ISO 7785-2:1998 | DENTAL HANDPIECES - PART 2: STRAIGHT AND GEARED ANGLE HANDPIECES |
16/30342879 DC : 0 | BS EN 15621 - ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
DIN EN ISO 16373-1:2016-05 | TEXTILES - DYESTUFFS - PART 1: GENERAL PRINCIPLES OF TESTING COLOURED TEXTILES FOR DYESTUFF IDENTIFICATION (ISO 16373-1:2015) |
DIN ISO 22036:2009-06 | Soil quality - Determination of trace elements in extracts of soil by inductively coupled plasma - atomic emission spectrometry (ICP-AES) (ISO 22036:2008) |
PD CEN/TS 15968:2010 | Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams. Method for sampling, extraction and analysis by LCqMS or LC-tandem/MS |
DIN ISO 10390:2005-12 | SOIL QUALITY - DETERMINATION OF PH |
I.S. EN 16400:2013 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - HYDROGEN PEROXIDE |
BS 3900-F18:1998 | Methods of test for paint. Durability tests on paint films Determination of resistance to corrosion under a wet (salt fog)/dry/humidity cycle |
PD ISO/TS 17379-1:2013 | Water quality. Determination of selenium Method using hydride generation atomic fluorescence spectrometry (HG-AFS) |
PREN 12014-2 : DRAFT 2016 | FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 2: HPLC/IC METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLE PRODUCTS |
BS EN ISO 10693:2014 | Soil quality. Determination of carbonate content. Volumetric method |
DIN ISO 8691:2010-09 | Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing (ISO 8691:1994) |
UNI EN 15410 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI) |
CEN/TR 10362:2014 | Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method |
DIN EN ISO 17234-1:2015-07 | LEATHER - CHEMICAL TESTS FOR THE DETERMINATION OF CERTAIN AZO COLORANTS IN DYED LEATHERS - PART 1: DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS (ISO 17234-1:2015) |
DIN EN 15478:2009-04 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
12/30254414 DC : 0 | BS EN 13138-2 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
UNI EN 15837 : 2010 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
BS 6068-2.92(2005) : 2005 | WATER QUALITY - DETERMINATION OF SELECTED ALKYLPHENOLS - PART 1: METHOD FOR NON-FILTERED SAMPLES USING LIQUID-LIQUID EXTRACTION AND GAS CHROMATOGRAPHY WITH MASS SELECTIVE DETECTION |
DD CEN/TS 15479:2006 | Fertilizers. Spectrophotometric determination of biuret in urea |
BS EN 16075:2011 | Fertilizers. Determination of N-(2-nitrophenyl) phosphoric triamide (2- NPT) in urea and fertilizers containing urea. Method using high-performance liquid chromatography (HPLC) |
13/30250160 DC : 0 | BS ISO 17289 - WATER QUALITY - DETERMINATION OF DISSOLVED OXYGEN - OPTICAL SENSOR METHOD |
15/30332539 DC : DRAFT DEC 2015 | BS EN 1406 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MODIFIED STARCHES |
I.S. EN ISO 105-C10:2007 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C10: COLOUR FASTNESS TO WASHING WITH SOAP OR SOAP AND SODA |
BS EN ISO 19020:2017 | Microbiology of the food chain. Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs |
BS ISO 15593:2001 | Environmental tobacco smoke. Estimation of its contribution to respirable suspended particles. Determination of particulate matter by ultraviolet absorbance and by fluorescence |
UNI CEN/TS 16317 : 2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC AMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
UNI EN ISO 10693 : 2014 | SOIL QUALITY - DETERMINATION OF CARBONATE CONTENT - VOLUMETRIC METHOD |
BS EN ISO 10523:2012 | Water quality. Determination of pH |
UNI EN ISO 8130-3 : 2011 | COATING POWDERS - PART 3: DETERMINATION OF DENSITY BY LIQUID DISPLACEMENT PYKNOMETER |
UNI EN ISO 21078-1 : 2008 | DETERMINATION OF BORON(3) OXIDE IN REFRACTORY PRODUCTS - PART 1: DETERMINATION OF TOTAL BORON(3) OXIDE IN OXIDIC MATERIALS FOR CERAMICS, GLASS AND GLAZES |
UNI EN 2434-001 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 001: BASIC REQUIREMENTS |
BS 6200-3.5.3:1998 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of boron Curcumin spectrophotometric method after distillation |
UNI CEN/TS 16318 : 2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CHROMIUM (6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
BS EN 1568-3:2008 | Fire extinguishing media. Foam concentrates Specification for low expansion foam concentrates for surface application to water-immiscible liquids |
10/30212120 DC : 0 | BS EN 152 - TEST METHODS FOR WOOD PRESERVATIVES - LABORATORY METHOD FOR DETERMINING THE PROTECTIVE EFFECTIVENESS OF A TREATMENT AGAINST BLUE STAIN IN SERVICE |
17/30358597 DC : 0 | BS EN ISO 4619 - DRIERS FOR PAINTS AND VARNISHES |
BS ISO 22962:2008 | Titanium and titanium alloys. Determination of iron. Inductively coupled plasma atomic emission spectrometry |
12/30265070 DC : DRAFT JULY 2012 | BS ISO 3961 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF IODINE VALUE |
I.S. ENV 839:2002 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVENESS AGAINST WOOD DESTROYING BASIDIOMYCETES - APPLICATION BY SURFACE TREATMENT |
13/30291170 DC : 0 | BS EN 10361 - ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
I.S. EN 12014-4:2005 | FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 4: ION-EXCHANGE CHROMATOGRAPHIC (IC) METHOD FOR THE DETERMINATION OF NITRATE AND NITRITE CONTENT OF MEAT PRODUCTS |
13/30255325 DC : 0 | BS EN 12595 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
04/30124460 DC : DRAFT OCT 2004 | ISO 9936 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TOCOPHEROL AND TOCOTRIENOL CONTENTS BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
04/30113378 DC : DRAFT MAY 2004 | ISO 4263-4 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS - TOST TEST - PART 4: PROCEDURE FOR INDUSTRIAL GEAR OILS |
BS ISO 4942:2016 | Steels and irons. Determination of vanadium content. N-BPHA spectrophotometric method |
08/30180729 DC : DRAFT JUNE 2008 | BS ISO 11533 - IRON ORES - DETERMINATION OF COBALT CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
14/30287140 DC : 0 | BS EN ISO 6271 - CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT COLOUR SCALE |
BS ISO 7886-2 : 1996 AMD 9835 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS |
BS 7079-B12(2003) : 2003 AMD 15513 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - FIELD METHOD FOR THE TITRIMETRIC DETERMINATION OF WATER-SOLUBLE FERROUS IONS |
08/30188879 DC : DRAFT DEC 2008 | BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
10/30231805 DC : 0 | BS EN 1240 - ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
14/30263834 DC : 0 | BS ISO 18089 - CORROSION OF METALS AND ALLOYS - DETERMINATION OF THE ELECTROCHEMICAL CRITICAL CREVICE TEMPERATURE (CCT) FOR STAINLESS STEELS UNDER POTENTIOSTATIC CONTROL |
BS ISO 14869-2:2002 | Soil quality. Dissolution for the determination of total element content Dissolution by alkaline fusion |
00/123884 DC : DRAFT OCT 2000 | PREN 13982 - SURFACE ACTIVE AGENTS - DETERMINATION OF THE ACTIVE MATTER CONTENT OF ALKYLAMIDOPROPYLBETAINES AND ALKYLBETAINES |
BS EN 14362-3:2012 | Textiles. Methods for determination of certain aromatic amines derived from azo colorants Detection of the use of certain azo colorants, which may release 4-aminoazobenzene |
ISO 5815-1:2003 | Water quality Determination of biochemical oxygen demand after n days (BODn) Part 1: Dilution and seeding method with allylthiourea addition |
16/30318771 DC : 0 | BS ISO 20295 - SOIL QUALITY - DETERMINATION OF PERCHLORATE IN SOIL USING ION CHROMATOGRAPHY |
BS ISO 24362-1:2014 | Textiles. Methods for determination of certain aromatic amines derived from azo colorants Detection of the use of certain azo colorants accessible with and without extracting the fibres |
16/30338117 DC : 0 | BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
16/30295090 DC : 0 | BS EN ISO 13438 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO OXIDATION |
04/30124546 DC : DRAFT OCT 2004 | EN 1483 - WATER QUALITY - DETERMINATION OF MERCURY |
ISO 8124-5:2015 | Safety of toys — Part 5: Determination of total concentration of certain elements in toys |
09/30203040 DC : DRAFT JULY 2009 | BS EN 15408 - SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF SULPHUR (S), CHLORINE (CL), FLUORINE (F) AND BROMINE (BR) CONTENT |
14/30309972 DC : 0 | BS EN 14984 - LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
BS ISO 14703:2008 | Fine ceramics (advanced ceramics, advanced technical ceramics). Sample preparation for the determination of particle size distribution of ceramic powders |
PREN ISO 17234-1 : DRAFT 2012 | LEATHER - CHEMICAL TESTS FOR THE DETERMINATION OF CERTAIN AZO COLORANTS IN DYED LEATHERS - PART 1: DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS (ISO/DIS 17234-1:2012) |
PREN 839 : DRAFT 2013 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST WOOD DESTROYING BASIDIOMYCETES - APPLICATION BY SURFACE TREATMENT |
BS ISO 16264 : 2002 AMD 15052 | WATER QUALITY - DETERMINATION OF SOLUBLE SILICATES BY FLOW ANALYSIS (FIA AND CFA) AND PHOTOMETRIC DETECTION |
17/30351682 DC : 0 | BS EN ISO 20150 - FOOTWEAR AND FOOTWEAR COMPONENTS - QUANTITATIVE CHALLENGE TEST METHOD TO ASSESS ANTIFUNGAL ACTIVITY |
15/30272436 DC : DRAFT MAY 2015 | BS EN 16857 - FOODSTUFFS - DETERMINATION OF BENZENE IN SOFT DRINKS, OTHER BEVERAGES AND VEGETABLE-BASED INFANT FOODS BY HEADSPACE GAS CHROMATOGRAPHY MASS SPECTROMETRY (HS-GC-MS) |
UNE-EN 60661:2015 | Methods for measuring the performance of electric household coffee makers |
ISO 2070:1997 | Aluminium oxide primarily used for the production of aluminium Determination of calcium content |
BS ISO 16308:2014 | Water quality. Determination of glyphosate and AMPA. Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection |
10/30229130 DC : 0 | BS EN 62321-1 ED 1 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTRO TECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW |
BS ISO 29941:2010 | Condoms. Determination of nitrosamines migrating from natural rubber latex condoms |
BS EN ISO 11085:2015 | Cereals, cereals-based products and animal feeding stuffs. Determination of crude fat and total fat content by the Randall extraction method |
I.S. EN ISO 10340:1997 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - METHOD FOR DETERMINING THE EXTRACTABLE SUBSTANCES |
15/30289037 DC : 0 | BS EN ISO 7886-1 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 1: SYRINGES FOR MANUAL USE |
DIN EN 15835:2010-05 | Foodstuffs - Determination of ochratoxin A in cereal based foods for infants and young children - HPLC method with immunoaffinity column clean up and fluorescence detection |
PREN 16418 : DRAFT 2012 | PAPER AND BOARD - DETERMINATION OF THE CYTOTOXICITY OF AQUEOUS EXTRACTS USING A METABOLICALLY COMPETENT HEPATOMA CELL LINE (HEPG2) |
ISO 11704:2010 | Water quality Measurement of gross alpha and beta activity concentration in non-saline water Liquid scintillation counting method |
I.S. CEN TS 15559:2007 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO ULSCH |
UNE-EN ISO 18465:2017 | Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC-MS/MS (ISO 18465:2017) |
UNE-EN 15845:2010 | Paper and board - Determination of the cytotoxicity of aqueous extracts |
BS ISO 976:2013 | Rubber and plastics. Polymer dispersions and rubber lattices. Determination of pH |
BS 2000-280(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND LUBRICANTS - INHIBITED MINERAL TURBINE OILS - DETERMINATION OF OXIDATION STABILITY |
I.S. EN 16204:2012 | FOODSTUFFS - DETERMINATION OF LIPOPHILIC ALGAL TOXINS (OKADAIC ACID GROUP TOXINS, YESSOTOXINS, AZASPIRACIDS, PECTENOTOXINS) IN SHELLFISH AND SHELLFISH PRODUCTS BY LC-MS/MS |
12/30218314 DC : 0 | BS ISO 17378-2 - WATER QUALITY - DETERMINATION OF ARSENIC AND ANTIMONY - PART 2: METHOD USING HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HG-AAS) |
ISO 3771:2011 | Petroleum products — Determination of base number — Perchloric acid potentiometric titration method |
BS EN ISO 13160:2015 | Water quality. Strontium 90 and strontium 89. Test methods using liquid scintillation counting or proportional counting |
09/30210426 DC : 0 | BS EN ISO 15351 - STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
I.S. EN ISO 5403-2:2011 | LEATHER - DETERMINATION OF WATER RESISTANCE OF FLEXIBLE LEATHER - PART 2: REPEATED ANGULAR COMPRESSION (MAESER) (ISO 5403-2:2011) |
12/30258176 DC : 0 | BS EN 1421 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM CHLORIDE |
I.S. EN 16523-1:2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
14/30278508 DC : 0 | BS ISO 18363-1 - ANIMAL AND VEGETABLES FATS AND OILS - DETERMINATION OF FATTY ACID-BOUND 3-CHLOROPROPANE-1,2-DIOL (3-MCPD) AND 2,3-EPOXI-PROPANE-1-OL (GLYCIDOL) - DIFFERENTIAL METHOD USING GC/MS - PART 1: METHOD BY GC/MS (DIFFERENTIAL MEASUREMENT) |
DD ISO/TS 16176:2011 | Rubber compounding ingredients. Carbon black. Determination of the aggregate-size distribution at ultimate dispersion |
I.S. EN 15028:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORATE |
ISO/TS 14569-2:2001 | Dental materials — Guidance on testing of wear — Part 2: Wear by two- and/or three body contact |
PD ISO/TS 17951-2:2016 | Water quality. Determination of fluoride using flow analysis (FIA and CFA) Method using continuous flow analysis (CFA) with automated in-line distillation |
DIN EN ISO 11206:2013-05 | Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011); German version EN ISO 11206:2013 |
I.S. EN 62554:2011 | SAMPLE PREPARATION FOR MEASUREMENT OF MERCURY LEVEL IN FLUORESCENT LAMPS |
17/30319460 DC : 0 | BS EN ISO 14254 - SOIL QUALITY - DETERMINATION OF EXCHANGEABLE ACIDITY USING BARIUM CHLORIDE SOLUTION AS EXTRACTANT |
BS 6068-4.2:1989 | Water quality. Microbiological methods Guide to the enumeration of micro-organism by culture |
ONORM EN ISO 5667-3 : 2013 | WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012) |
13/30280633 DC : 0 | BS ISO 14242-1 - IMPLANTS FOR SURGERY - WEAR OF TOTAL HIP-JOINT PROSTHESES - PART 1: LOADING AND DISPLACEMENT PARAMETERS FOR WEAR-TESTING MACHINES AND CORRESPONDING ENVIRONMENTAL CONDITIONS FOR TEST |
PD CEN/TS 14417:2014 | Geosynthetic barriers. Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers |
I.S. EN 15781:2009 | ANIMAL FEEDING STUFFS - DETERMINATION OF MADURAMICIN-AMMONIUM BY REVERSED-PHASE HPLC USING POST-COLUMN DERIVATISATION |
I.S. EN ISO 25619-1:2009 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 1: COMPRESSIVE CREEP PROPERTIES |
08/30179329 DC : DRAFT JUNE 2008 | BS EN 15562 - FERTILIZERS - DETERMINATION OF CYANAMIDE NITROGEN |
06/30145866 DC : DRAFT FEB 2006 | ISO 5418-1 - IRON ORES - DETERMINATION OF COPPER CONTENT - PART 1: 2 ,2'-BIQUINOLYL SPECTROPHOTOMETRIC METHOD |
BS 3900-A19(1998) : 1998 AMD 13290 | METHODS OF TEST FOR PAINTS - DETERMINATION OF DENSITY BY THE PYKNOMETER METHOD |
DIN EN 15652:2009-09 | FOODSTUFFS - DETERMINATION OF NIACIN BY HPLC |
BS 7079-B9(1998) : 1998 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - GROUP B: METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART B9: FIELD METHOD FOR THE CONDUCTOMETRIC DETERMINATION OF WATER-SOLUBLE SALTS |
BS EN ISO 13438:2004 | Geotextiles and geotextile-related products. Screening test method for determining the resistance to oxidation |
BS EN ISO 15324:2008 | Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test |
UNI EN 16086-2 : 2012 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PLANT RESPONSE - PART 2: PETRI DISH TEST USING CRESS |
BS 3900-B12:1986 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Determination of \'soluble\' mercury content |
UNI EN ISO 15181-6 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 6: DETERMINATION OF TRALOPYRIL RELEASE RATE BY QUANTITATION OF ITS DEGRADATION PRODUCT IN THE EXTRACT |
ISO/TS 14256-1:2003 | Soil quality — Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution — Part 1: Manual method |
14/30256681 DC : 0 | BS ISO 13165-3 - WATER QUALITY - MEASUREMENT OF RADIUM-226 - PART 3: TEST METHOD USING COPRECIPITATION AND GAMMA-SPECTROMETRY |
13/30259011 DC : 0 | BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
05/30081910 DC : DRAFT NOV 2005 | EN ISO 11885 - WATER QUALITY - DETERMINATION OF SELECTED ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
03/309709 DC : DRAFT JULY 2003 | ISO 11732 - WATER QUALITY - DETERMINATION OF AMMONIUM NITROGEN - METHOD BY FLOW ANALYSIS (CFA AND FIA) AND SPECTROMETRIC DETECTION |
BS 2000-539(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD |
03/303832 DC : DRAFT APR 2003 | EN 14663 - FOODSTUFFS - DETERMINATION OF VITAMIN B[6] (INCLUDING ITS GLYCOSYLATED FORMS) BY HPLC |
UNE-EN 16206:2012 | Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) |
BS 3900-B6:1986 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Determination of \'soluble\' lead content |
03/306722 DC : DRAFT MAY 2003 | EN 14666 - SURFACE ACTIVE AGENTS - DETERMINATION OF TETRAACETYL ETHYLENE DIAMINE (TAED) CONTENT IN TAED GRANULES - GAS CHROMATOGRAPHIC METHOD |
UNE-EN 15768:2015 | Influence of materials on water intended for human consumption - GC-MS identification of water leachable organic substances |
UNI EN ISO 27587 : 2009 | LEATHER - CHEMICAL TESTS - DETERMINATION OF THE FREE FORMALDEHYDE IN PROCESS AUXILIARIES |
I.S. EN 16155:2012 | FOODSTUFFS - DETERMINATION OF SUCRALOSE - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
DD CEN/TS 15119-1:2008 | Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground). Laboratory method |
PD ISO/TS 16780:2015 | Water quality. Determination of polychlorinated naphthalenes (PCN). Method using gas chromatography (GC) and mass spectrometry (MS) |
BS ISO 23317:2014 | Implants for surgery. In vitro evaluation for apatite-forming ability of implant materials |
12/30229169 DC : 0 | BS ISO 16308 - WATER QUALITY - DETERMINATION OF GLYPHOSATE AND AMPA - METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) WITH TANDEM MASS SPECTROMETRIC DETECTION |
BS EN ISO 19343:2017 | Microbiology of the food chain. Detection and quantification of histamine in fish and fishery products. HPLC method |
17/30360614 DC : 0 | BS EN ISO 5398-3 - LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 3: QUANTIFICATION BY ATOMIC ABSORPTION SPECTROMETRY |
DIN EN 16620:2015-06 | FOOD ANALYSIS - DETERMINATION OF FURAN IN COFFEE AND COFFEE PRODUCTS BY HEADSPACE GAS CHROMATOGRAPHY AND MASS SPECTROMETRY (HS GC-MS) |
UNE-EN ISO 28706-5:2012 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems (ISO 28706-5:2010) |
10/30199301 DC : DRAFT DEC 2010 | BS EN ISO 12782-1 - SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIFICATION OF CONSTITUENTS IN SOILS AND SOIL MATERIALS - PART 1: EXTRACTION OF AMORPHOUS IRON OXIDES AND HYDROXIDES WITH ASCORBIC ACID |
UNE-EN 71-12:2017 | Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substances |
NF EN ISO 28723 : 2011 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF THE EDGE COVERING ON ENAMELLED STEEL PLATE TO BE USED IN HEAT EXCHANGERS |
BS ISO 14899:2001 | Plastics. Polyols for use in the production of polyurethane. Determination of basicity |
ISO 21847-2:2007 | Nuclear fuel technology Alpha spectrometry Part 2: Determination of plutonium in uranium and its compounds |
DIN EN 16169:2012-11 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF KJELDAHL NITROGEN |
DIN EN ISO 1135-3 E : 2017 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
BS 2000-156(2005) : 2005 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 156: DETERMINATION OF HYDROCARBON TYPES IN PETROLEUM PRODUCTS - FLUORESCENT INDICATOR ADSORPTION METHOD |
BS 2000-319(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
DIN EN ISO 22288:2009-04 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE VAMP FLEX METHOD |
BS EN 15030 : 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SILVER SALTS FOR INTERMITTENT USE |
BS ISO 13357-1:2017 | Petroleum products. Determination of the filterability of lubricating oils Procedure for oils in the presence of water |
BS EN ISO 17380:2013 | Soil quality. Determination of total cyanide and easily liberatable cyanide. Continuous-flow analysis method |
14/30302298 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
13/30290460 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
BS ISO 14388-3:2014 | Soil quality. Acid-base accounting procedure for acid sulfate soils Suspension peroxide oxidation combined acidity and sulfur (SPOCAS) methodology |
07/30160967 DC : 0 | BS ISO 22303 - TOBACCO - DETERMINATION OF TOBACCO SPECIFIC NITROSAMINES - METHOD USING BUFFER EXTRACTION |
ONORM EN ISO 11260 : 2011 | SOIL QUALITY - DETERMINATION OF EFFECTIVE CATION EXCHANGE CAPACITY AND BASE SATURATION LEVEL USING BARIUM CHLORIDE SOLUTION |
UNE-EN 15947-4:2016 | Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
UNE-EN ISO 4630:2016 | Clear liquids - Estimation of colour by the Gardner colour scale (ISO 4630:2015) |
16/30293875 DC : 0 | BS EN ISO 28706-2 - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS |
BS 5766-18:1999 | Methods for analysis of animal feeding stuffs Determination of fat content |
AFAP-3 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - TOXICITY OF FIRE EFFLUENTS |
UNI EN ISO 28706-5 : 2011 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 5: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION IN CLOSED SYSTEMS |
BS ISO 17353 : 2004 AMD 15964 | WATER QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS CHROMATOGRAPHIC METHOD |
BS ISO 13160 : 2012 | WATER QUALITY - STRONTIUM 90 AND STRONTIUM 89 - TEST METHODS USING LIQUID SCINTILLATION COUNTING OR PROPORTIONAL COUNTING |
DIN EN 16523-1:2015-04 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
BS EN ISO 5402-1:2017 | Leather. Determination of flex resistance Flexometer method |
BS EN 1400 : 2013 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
05/30126083 DC : DRAFT MAY 2005 | EN 1568-1 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 1: SPECIFICATION FOR MEDIUM EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
08/30180703 DC : DRAFT APR 2008 | BS EN 60754-1 - TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 1: DETERMINATION OF THE HALOGEN ACID GAS CONTENT |
UNE-ISO 22634:2013 | Cigarettes -- Determination of benzo[a]pyrene in cigarette mainstream smoke -- Method using gas chromatography/mass spectrometry |
12/30261559 DC : 0 | BS ISO 5164 - PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
ISO 22634-1:2017 | Cigarettes Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS Part 1: Method using methanol as extraction solvent |
ISO 14256-2:2005 | Soil quality — Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution — Part 2: Automated method with segmented flow analysis |
11/30250744 DC : 0 | BS EN ISO 17380 - SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE AND EASILY LIBERATABLE CYANIDE - CONTINUOUS-FLOW ANALYSIS METHOD |
UNE-EN 15962:2011 | Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients |
BS 2000-427(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUEFIED PETROLEUM GASES - DETERMINATION OF OIL RESIDUES - HIGH TEMPERATURE METHOD |
BS ISO 17372 : 2008 | ANIMAL FEEDING STUFFS - DETERMINATION OF ZEARALENONE BY IMMUNOAFFINITY COLUMN CHROMATOGRAPHY AND HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
BS 2000-430(1997) : 1997 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF ALKYL NITRATE IN DIESEL FUELS - SPECTROMETRIC METHOD |
05/30116670 DC : DRAFT MAR 2005 | BS ISO 13313 - IRON ORES - DETERMINATION OF SODIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
99/711597 DC : DRAFT JULY 1999 | PREN 4503 - AEROSPACE SERIES - TEXTILES - TEST METHOD - DETERMINATION OF WATER SOLUBLE CHLORIDE AND SULFATE OF AQUEOUS EXTRACTS |
13/30254322 DC : 0 | BS ISO 21613 - (U, PU)O[2] POWDERS AND SINTERED PELLETS - DETERMINATION OF CHLORINE AND FLUORINE |
BS EN 60601-2-24:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
I.S. EN 1400:2013 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
DIN ISO 16632:2015-12 | Tobacco and tobacco products - Determination of water content - Gas-chromatographic method (ISO 16632:2013) |
03/300973 DC : DRAFT JAN 2003 | ISO 6488 - TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD |
BS 2000-620(2014) : 2014 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
I.S. EN ISO 12846:2012 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY (AAS) WITH AND WITHOUT ENRICHMENT (ISO 12846:2012) |
DIN EN ISO 13160:2016-03 | WATER QUALITY - STRONTIUM 90 AND STRONTIUM 89 - TEST METHODS USING LIQUID SCINTILLATION COUNTING OR PROPORTIONAL COUNTING (ISO 13160:2012) |
DIN EN ISO 23161:2011-10 | SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD (ISO 23161:2009) |
03/305328 DC : DRAFT MAR 2003 | EN ISO 8502-2 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 2: LABORATORY DETERMINATION OF CHLORIDE ON CLEANED SURFACES |
05/30126095 DC : 0 | EN 1568-4 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 4: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-MISCIBLE LIQUIDS |
08/30181232 DC : DRAFT APR 2008 | BS EN ISO 21627-2 - PLASTICS - EPOXY RESINS - DETERMINATION OF CHLORINE CONTENT - PART 2: EASILY SAPONIFIABLE CHLORINE |
CEI EN 50414 : 2007 | TEST METHODS FOR ANALYSIS OF LEAD IN PVC TAKEN FROM INSULATION AND SHEATH OF ELECTRIC AND OPTICAL FIBRE CABLES - METHOD A: TOTAL LEAD CONTENT DETERMINATION WITH FLAME EXCITATION ATOMIC ABSORPTION SPECTROMETRY - METHOD B: QUALITATIVE ANALYSIS OF LEAD BY LEAD SULPHIDE STAINING |
03/313985 DC : DRAFT NOV 2003 | EN 1212 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM POLYPHOSPHATE |
DIN EN 15649-1:2014-06 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
DIN EN 15768:2015-05 | INFLUENCE OF MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - GC-MS IDENTIFICATION OF WATER LEACHABLE ORGANIC SUBSTANCES |
DD CEN/TS 15705:2009 | Fertilizers. Determination of urea condensates using high-performance liquid chromotography (HPLC). Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
06/30150184 DC : DRAFT MAY 2006 | ISO/DIS 16265-1 - WATER QUALITY - DETERMINATION OF METHYLENE BLUE ACTIVE SUBSTANCES (MBAS) INDEX BY FLOW ANALYSIS (CFA AND FIA) - ESTIMATION OF THE CONTENT OF ANIONIC SUBSTANCES - PART 1: METHOD BY FLOW INJECTION ANALYSIS (FIA) |
BS EN ISO 4630:2015 | Clear liquids. Estimation of colour by the Gardner colour scale |
11/30246867 DC : 0 | BS EN 1400 - CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 15482:2013-01 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM PERMANGANATE |
18/30369613 DC : 0 | BS EN ISO 3681 - BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SAPONIFICATION VALUE - TITRIMETRIC METHOD |
DIN ISO 20279:2006-01 | Soil quality - Extraction of thallium and determination by electrothermal atomic absorption spectrometry (ISO 20279:2005) |
BS 7079-B5(2004) : 2004 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 5: MEASUREMENT OF CHLORIDE ON STEEL SURFACES PREPARED FOR PAINTING (ION DETECTION TUBE METHOD) |
UNI EN ISO 14088 : 2012 | LEATHER - CHEMICAL TESTS - QUANTITATIVE ANALYSIS OF TANNING AGENTS BY FILTER METHOD |
PREN 1811 : DRAFT 2009 | REFERENCE TEST METHOD FOR RELEASE OF NICKEL FROM POST ASSEMBLIES WHICH ARE INSERTED INTO PIERCED PARTS OF THE HUMAN BODY AND PRODUCTS INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN |
BS 5766-26(2001) : 2001 | ANIMAL FEEDING STUFFS - DETERMINATION OF VITAMIN A CONTENT - METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
I.S. EN ISO 17072-2:2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
15/30316146 DC : 0 | BS ISO 13357-1 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER |
UNI EN ISO 648 : 2009 | LABORATORY GLASSWARE - SINGLE-VOLUME PIPETTES |
08/30167359 DC : DRAFT AUG 2008 | BS ISO 10704 - WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD |
DIN ISO 13357-1:2009-04 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER |
DIN EN 15829:2010-05 | Foodstuffs - Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit and dried figs - HPLC method with immunoaffinity column cleanup and fluorescence detection |
BS 6068-2.68(1999) : 1999 | WATER QUALITY - DETERMINATION OF PHENOL INDEX BY FLOW ANALYSIS (FIA AND CFA) |
07/30159058 DC : DRAFT FEB 2007 | BS EN 15360 - FERTILIZERS - DETERMINATION OF DICYANDIAMIDE - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
03/309701 DC : 0 | |
07/30163410 DC : 0 | BS ISO 648 - LABORATORY GLASSWARE - SINGLE VOLUME PIPETTES |
16/30342873 DC : 0 | BS EN 15510 - ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
DIN EN ISO 8623:2015-12 | TALL-OIL FATTY ACIDS FOR PAINTS AND VARNISHES - TEST METHODS AND CHARACTERISTIC VALUES (ISO 8623:2015) |
DIN EN 14429:2015-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
BS ISO 17293-2:2014 | Surface active agents. Determination of chloroacetic acid (chloroacetate) in surfactants Ionic chromatographic method |
17/30302770 DC : 0 | BS ISO 13779-3 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 3: CHEMICAL ANALYSIS AND CHARACTERIZATION OF CRYSTALLINITY RATIO AND PHASE PURITY |
UNI EN 15040 : 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - PHOSPHONIC ACIDS AND SALTS |
UNI EN 16418 : 2014 | PAPER AND BOARD - DETERMINATION OF THE CYTOTOXICITY OF AQUEOUS EXTRACTS USING A METABOLICALLY COMPETENT HEPATOMA CELL LINE (HEPG[2]) |
DIN EN 13523-27:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
BS 7079-F16(1994) : 1994 AMD 9851 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - DETERMINATION OF WATER-SOLUBLE CONTAMINANTS BY CONDUCTIVITY MEASUREMENT |
BIS IS 15948 : 2011 | ANIMAL FEEDING STUFFS - DETERMINATION OF VITAMIN E CONTENT - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
BS ISO 7203-1:1995 | Fire extinguishing media. Foam concentrates Specification for low expansion foam concentrates for top application to water-immiscible liquids |
I.S. ENV 14166:2002 | FOODSTUFFS - DETERMINATION OF VITAMIN B6 BY MICROBIOLOGICAL ASSAY |
BS EN ISO 17694:2016 | Footwear. Test methods for uppers and lining. Flex resistance |
ISO 20863:2018 | Footwear — Test methods for stiffeners and toepuffs — Bondability |
BS EN ISO 9917-2:2017 | Dentistry. Water-based cements Resin-modified cements |
10/30176776 DC : 0 | BS ISO 9308-2 - WATER QUALITY - ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 2: MOST PROBABLE NUMBER METHOD |
03/312777 DC : DRAFT AUG 2003 | BS ISO 14502-2 - TEST METHODS FOR SUBSTANCES CHARACTERISTIC OF GREEN AND BLACK TEA - DETERMINATION OF CATECHINS IN GREEN TEA - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
14/30300558 DC : 0 | BS EN 16128 - OPHTHALMIC OPTICS - REFERENCE METHOD FOR THE TESTING OF SPECTACLE FRAMES AND SUNGLASSES FOR NICKEL RELEASE |
BS EN ISO 28888:2013 | Dentistry. Screening method for erosion potential of oral rinses on dental hard tissues |
BS EN ISO 18857-2:2011 | Water quality. Determination of selected alkylphenols Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation |
03/300547 DC : DRAFT FEB 2003 | EN 891 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) CHLORIDE SULFATE |
03/305259 DC : DRAFT MAR 2003 | BS ISO 17353 - WATER QUALITY - DETERMINATION OF SELECTED ORGANIC COMPOUNDS - GAS CHROMATOGRAPHIC METHOD |
DIN EN ISO 23913:2009-09 | WATER QUALITY - DETERMINATION OF CHROMIUM(6) - METHOD USING FLOW ANALYSIS (FIA AND CFA) AND SPECTROMETRIC DETECTION |
BS ISO 17294-1 : 2004 AMD 16802 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
DIN EN 16802:2016-07 | FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - DETERMINATION OF INORGANIC ARSENIC IN FOODSTUFFS OF MARINE AND PLANT ORIGIN BY ANION-EXCHANGE HPLC-ICP-MS |
DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
05/30126088 DC : DRAFT MAY 2005 | EN 1568-2 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 2: SPECIFICATION FOR HIGH EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
BS EN 10355:2013 | Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
13/30272431 DC : 0 | BS EN 16619 - FOOD ANALYSIS - DETERMINATION OF BENZO[A]PYRENE, BENZ[A]ANTHRACENE, CHRYSENE AND BENZO[B]FLUORANTHENE IN FOODSTUFFS BY GAS CHROMATOGRAPHY MASS SPECTROMETRY (GC-MS) |
BS 6068-4.13(2000) : 2000 AMD 13447 | WATER QUALITY - PART 4: MICROBIOLOGICAL METHODS - SECTION 4.13: DETECTION AND ENUMERATION OF BACTERIOPHAGES - ENUMERATION OF SOMATIC COLIPHAGES |
08/30156451 DC : DRAFT AUG 2008 | BS EN ISO 10993-13 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 13: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM POLYMERIC MEDICAL DEVICES |
14/30272865 DC : 0 | BS ISO 13547-1 - COPPER, LEAD, ZINC AND NICKEL SULFIDE CONCENTRATES - DETERMINATION OF ARSENIC - PART 1: IRON HYDROXIDE CONCENTRATION AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
DIN EN 16037:2012-09 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN SULFATE |
15/30328796 DC : 0 | BS EN 13253 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS) |
BS EN ISO 12782-5:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of humic substances from aqueous samples |
DIN EN 15452:2008-11 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY O,P-EDDHA BY REVERSED PHASE HPLC |
DIN EN ISO 20541:2008-12 | MILK AND MILK PRODUCTS - DETERMINATION OF NITRATE CONTENT - METHOD BY ENZYMATIC REDUCTION AND MOLECULAR-ABSORPTION SPECTROMETRY AFTER GRIESS REACTION |
S.R. CEN/TS 16172:2013 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ELEMENTS USING GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) |
07/30174201 DC : 0 | BS EN ISO 3961 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF IODINE VALUE |
12/30270967 DC : 0 | BS EN 16502 - TEST METHOD FOR THE DETERMINATION OF THE DEGREE OF SOIL ACIDITY ACCORDING TO BAUMANN-GULLY |
BS EN 16691:2015 | Water quality. Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS) |
05/30136339 DC : DRAFT JUL 2005 | EN ISO 105-E16 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E16: COLOUR FASTNESS TO WATER SPOTTING ON UPHOLSTERY FABRICS |
06/30159143 DC : 0 | BS EN 15608 - SURFACE ACTIVE AGENTS - QUANTITATIVE DETERMINATION OF FREE FATTY ACID IN ALKYLAMIDOPROPYLBETAINES - GAS-CHROMATOGRAPHIC METHOD |
BS ISO 4404-1 : 2001 AMD 16690 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS |
BS ISO 11723:2016 | Solid mineral fuels. Determination of arsenic and selenium. Eschka’s mixture and hydride generation method |
15/30296854 DC : 0 | BS ISO 13781 - INPLANTS FOR SURGERY - HOMOPOLYMERS, COPOLYMERS AND BLENDS ON POLY(LACTIDE) - IN VITRO DEGRADATION TESTING |
BS 6782-14.2(2000) : 2000 AMD 10884 | BINDERS FOR PAINTS AND VARNISHES - PART 14 - METHODS OF TEST FOR ALKYD RESINS - SECTION 14.2 - DETERMINATION OF PHTHALIC ANHYDRIDE CONTENT |
PREN 13493 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
15/30324874 DC : 0 | BS EN 49-1 - WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST ANOBIUM PUNCTATUM (DE GEER) BY EGGLAYING AND LARVAL SURVIVAL - PART 1: APPLICATION BY SURFACE TREATMENT (LABORATORY METHOD) |
BS ISO 11731-2 : 2004 | WATER QUALITY - DETECTION AND ENUMERATION OF LEGIONELLA - PART 2: DIRECT MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL COUNTS |
DD CEN/TS 15083-1:2005 | Durability of wood and wood-based products. Determination of the natural durability of solid wood against food-destroying fungi, test methods Basidiomycetes |
BS ISO 15710 : 2002 AMD 16861 | PAINTS AND VARNISHES - CORROSION TESTING BY ALTERNATE IMMERSION IN AND REMOVAL FROM A BUFFERED SODIUM CHLORIDE SOLUTION |
11/30248579 DC : 0 | BS ISO 8425 - NUCLEAR FUEL TECHNOLOGY - DETERMINATION OF PLUTONIUM IN PURE PLUTONIUM NITRATE SOLUTIONS - GRAVIMETRIC METHOD |
ISO 3856-2:1984 | Paints and varnishes — Determination of "soluble" metal content — Part 2: Determination of antimony content — Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method |
02/560647 DC : DRAFT FEB 2002 | BS ISO 14154 - SOIL QUALITY - DETERMINATION OF SELECTED PHENOLS AND CHLOROPHENOLS - GAS-CHROMATOGRAPHIC METHOD |
11/30241787 DC : 0 | BS EN 62321-7-1 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 7-1: DETERMINATION OF THE PRESENCE OF HEXAVALENT CHROMIUM (CR(6)) IN COLOURLESS AND COLOURED CORROSION-PROTECTED COATINGS ON METALS BY THE COLOURIMETRIC METHOD |
BS EN 14805:2008 | Chemicals used for treatment of water intended for human consumption. Sodium chloride for on site electrochlorination using non-membrane technology |
DIN EN ISO 20701:2016-10 (Draft) | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO SALIVA (ISO/DIS 20701:2016) |
DD ISO/TS 9941:2005 | Milk and canned evaporated milk. Determination of tin content. Spectrometric method |
14/30289934 DC : 0 | BS ISO 18385 - MINIMIZING THE RISK OF DNA CONTAMINATION IN PRODUCTS USED TO COLLECT AND ANALYSE BIOLOGICAL MATERIAL FOR FORENSIC PURPOSES |
BS EN 16568:2014 | Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
BS ISO 10270 : 1995 | CORROSION OF METALS AND ALLOYS - AQUEOUS CORROSION TESTING OF ZIRCONIUM ALLOYS FOR USE IN NUCLEAR POWER REACTORS |
13/30279967 DC : 0 | BS EN ISO 6872 - DENTISTRY - CERAMIC MATERIALS |
PD CEN/TS 16319:2012 | Fertilizers. Determination of trace elements. Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
DIN EN ISO 16954:2015-11 | DENTISTRY - TEST METHODS FOR DENTAL UNIT WATERLINE BIOFILM TREATMENT (ISO 16954:2015) |
BS EN 15028:2012 | Chemicals used for treatment of water intended for human consumption. Sodium chlorate |
BS EN 15452:2008 | Fertilizers. Determination of chelating agents. Determination of iron chelated by o,p-EDDHA by reversed phase HPLC |
DIN EN 839:2015-01 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST WOOD DESTROYING BASIDIOMYCETES - APPLICATION BY SURFACE TREATMENT |
12/30259424 DC : 0 | BS EN 16418 - PAPER AND BOARD - DETERMINATION OF THE CYTOTOXICITY OF AQUEOUS EXTRACTS USING A METABOLICALLY COMPETENT HEPATOMA CELL LINE (HEPG2) |
PREN 13492 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
DIN EN 15039:2014-07 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - POLYCARBOXILIC ACIDS AND SALTS |
16/30323964 DC : 0 | BS EN ISO 5165 - PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
03/306724 DC : DRAFT MAY 2003 | EN 14668 - SURFACE ACTIVE AGENTS - DETERMINATION OF QUATERNARY AMMONIUM SURFACE ACTIVE AGENTS IN RAW MATERIALS AND FORMULATED PRODUCTS - POTENTIOMETRIC TWO PHASE TITRATION METHOD |
BS ISO 25101:2009 | Water quality. Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA). Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry |
UNI CEN/TS 16384 : 2012 | SYNTHETIC SPORT SYSTEMS - LEACHING TEST |
NF EN ISO 5529 : 2010 | WHEAT - DETERMINATION OF SEDIMENTATION INDEX - ZELENY TEST |
11/30238479 DC : 0 | BS EN 13368-2 - FERTILIZERS - DETERMINATION OF CHELATING AGENTS IN FERTILIZERS BY CHROMATOGRAPHY - PART 2: DETERMINATION OF FE CHELATED BY O,O-EDDHA, O,O-EDDHMA AND HBED BY ION PAIR CHROMATOGRAPHY |
17/30337313 DC : 0 | BS EN ISO 15681-2 - WATER QUALITY - DETERMINATION OF ORTHOPHOSPHATE AND TOTAL PHOSPHORUS CONTENTS BY FLOW ANALYSIS (FIA AND CFA) - PART 2: METHOD BY CONTINUOUS FLOW ANALYSIS (CFA) |
NF ISO 26062 : 2010 | NUCLEAR TECHNOLOGY - NUCLEAR FUELS - PROCEDURES FOR THE MEASUREMENT OF ELEMENTAL IMPURITIES IN URANIUM- AND PLUTONIUM BASED MATERIALS BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY |
NF EN ISO 17230 : 2011 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF WATER PENETRATION PRESSURE |
BS ISO 16533:2014 | Textiles. Measurement of exothermic and endothermic properties of textiles under humidity change |
05/30116640 DC : DRAFT APR 2005 | BS ISO 13291 - ZINC SULFIDE CONCENTRATES - DETERMINATION OF ZINC CONTENT - SOLVENT EXTRACTION AND EDTA TITRIMETRIC METHOD |
UNI EN 14805 : 2009 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORIDE FOR ON SITE ELECTROCHLORINATION USING NON-MEMBRANE TECHNOLOGY |
BS ISO 8070:2007 | Milk and milk products. Determination of calcium, sodium, potassium and magnesium contents. Atomic absorption spectrometric method |
PD CEN/TS 14418:2014 | Geosynthetic Barriers. Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers |
BS EN ISO 439:2010 | Steel and iron. Determination of total silicon content. Gravimetric method |
BS 6068-2.74(2002) : 2002 | WATER QUALITY - DETERMINATION OF MERCURY BY ATOMIC FLUORESCENCE SPECTROMETRY |
BS ISO 17315:2014 | Petroleum products and other liquids. Ethanol. Determination of total acidity by potentiometric titration |
09/30199719 DC : 0 | BS EN 16006 - ANIMAL FEEDING STUFFS - DETERMINATION OF FUMONISIN B[1] AND B[2] IN COMPOUND ANIMAL FEED WITH IMMUNOAFFINITY CLEAN-UP AND RP-HPLC WITH FLUORESCENCE DETECTION AFTER PRE- OR POSTCOLUMN DERIVATISATION |
I.S. EN 62321-8:2017 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 8: PHTHALATES IN POLYMERS BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS), GAS CHROMATOGRAPHY-MASS SPECTROMETRY USING A PYROLYZER/THERMAL DESORPTION ACCESSORY (PY/TD-GC-MS) |
03/305239 DC : DRAFT APR 2003 | BS ISO 16428 - IMPLANTS FOR SURGERY - TEST SOLUTION AND ENVIRONMENTAL CONDITIONS FOR STATIC AND DYNAMIC CORROSION AND WEAR TESTS ON IMPLANTABLE MATERIALS AND MEDICAL DEVICES |
UNI CEN/TS 16233-2 : 2012 | FOODSTUFFS - HPLC METHOD FOR THE DETERMINATION OF XANTHOPHYLLS IN FISH FLESH - PART 2: IDENTIFICATION OF THE ENANTIOMER RATIO OF ASTAXANTHIN |
ISO 27368:2008 | Analysis of blood for asphyxiant toxicants — Carbon monoxide and hydrogen cyanide |
BS ISO 8858-3:2004 | Hard coal. Froth flotation testing Release evaluation |
16/30303621 DC : 0 | BS ISO 19746 - DETERMINATION OF UREA CONTENT IN UREA-BASED FERTILIZERS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
UNE-EN ISO 19250:2013 | Water quality - Detection of Salmonella spp. (ISO 19250:2010) |
BS ISO 15202-3:2004 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Analysis |
DD ENV 807:2001 | Wood preservatives. Determination of the effectiveness against soft rotting micro-fungi and other soil inhabiting micro-organisms |
GOST R ISO 8891 : 2005 | DENTAL CASTING ALLOYS WITH NOBLE METAL CONTENT OF AT LEAST 25% BUT LESS THAN 75% - TECHNICAL REQUIREMENTS - TEST METHODS |
BS EN ISO 29022:2013 | Dentistry. Adhesion. Notched-edge shear bond strength test |
12/30257904 DC : 0 | BS EN 897 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CARBONATE |
UNI EN 14164 : 2014 | FOODSTUFFS - DETERMINATION OF VITAMIN B6 BY HIGH PERFORMANCE CHROMATOGRAPHY |
BS EN ISO 12782-2:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of crystalline iron oxides and hydroxides with dithionite |
10/30235114 DC : 0 | BS EN ISO 11642 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER |
10/30196081 DC : 0 | BS ISO 4404-1 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS |
BS EN 2434-001:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish Basic requirements |
BS ISO 13651:1996 | Plastics. Epoxy resins and related materials. Determination of total saponifiable chlorine |
BS 7077-1.2(1992) : AMD 8285 | DENTAL HANDPIECES AND ACCESSORIES - DENTAL HANDPIECES - SPECIFICATION FOR STRAIGHT AND GEARED ANGLE HANDPIECES |
BS EN ISO 7783:2011 | Paints and varnishes. Determination of water-vapour transmission properties. Cup method |
03/313971 DC : DRAFT NOV 2003 | EN 1198 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM DIHYDROGEN ORTHOPHOSPHATE |
BS EN 1911:2010 | Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method |
I.S. EN 2434-002:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 002: HIGH CHEMICAL RESISTANCE |
13/30266240 DC : 0 | BS ISO 17586 - SOIL QUALITY - EXTRACTION OF TRACE ELEMENTS USING DILUTE NITRIC ACID |
ISO 9917-2:2017 | Dentistry — Water-based cements — Part 2: Resin-modified cements |
UNI CEN ISO/TS 21268-2 : 2010 | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 2: BATCH TEST USING A LIQUID TO SOLID RATIO OF 10 L/KG DRY MATTER |
BS EN 15482:2012 | Chemicals used for treatment of water intended for human consumption. Sodium permanganate |
05/30131435 DC : DRAFT MAR 2005 | EN ISO 105-C10 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART C10: COLOUR FASTNESS TO WASHING WITH SOAP OR SOAP AND SODA |
12/30258764 DC : 0 | BS EN 14152 - FOODSTUFFS - DETERMINATION OF VITAMIN B2 BY HPLC |
BS EN ISO 28706-5:2011 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion in closed systems |
I.S. EN ISO 10309:2016 | METALLIC COATINGS - POROSITY TESTS - FERROXYL TEST (ISO 10309:1994) |
I.S. EN ISO 19343:2017 | MICROBIOLOGY OF THE FOOD CHAIN - DETECTION AND QUANTIFICATION OF HISTAMINE IN FISH AND FISHERY PRODUCTS - HPLC METHOD (ISO 19343:2017) |
DIN EN 16400:2014-03 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - HYDROGEN PEROXIDE |
BS 6782-9(1996) : 1996 AMD 10179 | BINDERS FOR PAINTS - GENERAL METHODS OF TEST FOR POLYISOCYANATE RESINS |
BS ISO 10378:2016 | Copper, lead and zinc sulfide concentrates. Determination of gold and silver. Fire assay gravimetric and flame atomic absorption spectrometric method |
S.R. CEN/TS 16175-2:2013 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF MERCURY - PART 2: COLD-VAPOUR ATOMIC FLUORESCENCE SPECTROMETRY (CV-AFS) |
DIN EN 16852:2015-04 (Draft) | FOODSTUFFS - DETERMINATION OF ETHYL CARBAMATE IN STONE FRUIT SPIRITS, FRUIT MARC SPIRITS AND OTHER SPIRIT DRINKS - GC-MS METHOD |
ISO 811:2018 | Textiles — Determination of resistance to water penetration — Hydrostatic pressure test |
12/30255696 DC : 0 | BS EN 117 - WOOD PRESERVATIVES - DETERMINATION OF TOXIC VALUES AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
BS ISO 13310:1997 | Iron ores. Determination of zinc content. Flame atomic absorption spectrometric method |
UNI EN 16070 : 2014 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - NATURAL ZEOLITE |
DIN EN 16168:2012-11 | Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method; German version EN 16168:2012 |
BS 7079-F17(1994) : 1994 AMD 9852 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - DETERMINATION OF WATER-SOLUBLE CHLORIDES |
UNE-EN ISO 14403-2:2013 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012) |
02/710011 DC : DRAFT AUG 2002 | PREN 14526 - FOODSTUFFS - DETERMINATION OF SAXITOXIN AND DC-SAXITOXIN IN MUSSELS - HPLC METHOD USING PRE-COLUMN DERIVATIZATION WITH PEROXIDE OR PERIODATE OXIDATION |
12/30238567 DC : 0 | BS EN ISO 16373-3 - TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARGINOGENIC EXTRACTABLE DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) (ISO/DIS 16373-3:2012) |
BS EN ISO 15181-4:2008 | Paints and varnishes. Determination of release rate of biocides from antifouling paints Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate |
17/30356226 DC : 0 | BS ISO 16793 - NUCLEAR FUEL TECHNOLOGY - GUIDE FOR CERAMOGRAPHIC PREPARATION OF UO[2] SINTERED PELLETS FOR MICROSTRUCTURE EXAMINATION |
BS 6068-4.14(2000) : 2000 | WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD |
08/30188245 DC : DRAFT AUG 2008 | BS EN 15851 - FOODSTUFFS - DETERMINATION OF AFLATOXIN B1 IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
I.S. EN ISO 18218-1:2015 | LEATHER - DETERMINATION OF ETHOXYLATED ALKYLPHENOLS - PART 1: DIRECT METHOD (ISO 18218-1:2015) |
UNE-EN ISO 29022:2013 | Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013) |
PD CEN/TS 16692:2015 | Water quality. Determination of tributyltin (TBT) in whole water samples. Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry |
BS ISO 19242:2015 | Rubber. Determination of total sulfur content by ion chromatography |
BS EN ISO 5398-2:2009 | Leather. Chemical determination of chromic oxide content Quantification by colorimetric determination |
BS ISO 22241-2:2006 | Diesel engines. NOx reduction agent AUS 32 Test methods |
DD CEN/TS 15621:2007 | Animal feeding stuffs. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES |
BS 6782-7:1995 | Binders for paints Method for determination of free-formaldehyde content of amino resins (sodium sulfite titrimetric method) |
01/715700 DC : 0 | ISO/DIS 16632 - TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF WATER CONTENT - GAS CHROMATOGRAPHIC METHOD |
03/314578 DC : DRAFT OCT 2003 | EN 14833 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF PHOSPHATE ESTER FLUIDS |
06/30145832 DC : DRAFT AUG 2006 | ISO 8983 - SOLID MINERAL FUELS - DETERMINATION OF NINE TRACE ELEMENTS - ACID DIGESTION AND FLAME ATOMIC ABSORPTION METHOD |
07/30134375 DC : DRAFT AUG 2007 | ISO 25101 - WATER QUALITY - DETERMINATION OF PERFLUOROOCTANESULFONATE (PFOS) AND PERFLUOROOCTANOATE (PFOA) - METHOD FOR UNFILTERED SAMPLES USING SOLID PHASE EXTRACTION AND LIQUID CHROMATOGRAPHY/MASS SPECTROMETRY |
UNI EN 10355 : 2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD] |
UNI ISO 1409 : 2009 | PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DETERMINATION OF SURFACE TENSION BY THE RING METHOD |
BS 3900-G9(1996) : 1996 AMD 10384 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE OF FREE FILMS (DISH METHOD) |
AAMI ISO 10993-13:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 13: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM POLYMERIC MEDICAL DEVICES |
02/564513 DC : DRAFT OCT 2002 | BS EN ISO 1135-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE |
BS EN 16523-1 : 2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
08/30180645 DC : DRAFT APR 2008 | BS EN ISO 660 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ACID VALUE AND ACIDITY |
DD ENV 13800:2000 | Lead and lead alloys. Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix |
07/30158610 DC : 0 | BS EN 12821 - FOODSTUFFS - DETERMINATION OF VITAMIN D BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MEASUREMENT OF CHOLECALCIFEROL (D3) AND ERGOCALCIFEROL (D2) |
UNI EN 15705 : 2010 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B)<br> |
UNI EN 2434-002 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 002: HIGH CHEMICAL RESISTANCE |
BS ISO 9831 : 98 AMD 14856 | ANIMAL FEEDING STUFFS, ANIMAL PRODUCTS, AND FAECES OR URINE - DETERMINATION OF GROSS CALORIFIC VALUE - BOMB CALORIMETER METHOD |
UNI EN ISO 12782-2 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 2: EXTRACTION OF CRYSTALLINE IRON OXIDES AND HYDROXIDES WITH DITHIONITE |
07/30169154 DC : 0 | BS ISO 28706-2 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS |
06/30065729 DC : DRAFT JUN 2006 | ISO 10319 - GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST |
98/125142 DC : DRAFT OCT 98 | DRAFT BS EN ISO 8655-4 - PISTON-OPERATED VOLUMETRIC INSTRUMENTS - PART 4: DILUTORS |
BS ISO 5418-1:2006 | Iron ores. Determination of copper 2,2\'-Biquinolyl spectrophotometric method |
UNI EN ISO 105-B07 : 2009 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B07: COLOUR FASTNESS TO LIGHT OF TEXTILES WETTED WITH ARTIFICIAL PERSPIRATION |
ISO 17995:2005 | Water quality Detection and enumeration of thermotolerant Campylobacter species |
DD CEN/TS 15559:2007 | Fertilizers. Determination of nitric and ammoniacal nitrogen according to Arnd |
UNI EN ISO 10416 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
UNI EN 14166 : 2009 | FOODSTUFFS - DETERMINATION OF VITAMIN B6 BY MICROBIOLOGICAL ASSAY |
05/30135875 DC : DRAFT JUL 2005 | ISO 22241-2 - DIESEL ENGINES - NO X REDUCTION ADDITIVE AV 32 - PART 2: TEST METHODS |
UNI EN ISO 29022 : 2013 | DENTISTRY - ADHESION - NOTCHED-EDGE SHEAR BOND STRENGTH TEST |
BS ISO 15553:2006 | Water quality. Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water |
DD CEN/TS 14494:2003 | Leather. Chemical tests. Determination of the content of pentachlorophenol in leather |
SAE MS 1000 : 2013 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
03/313976 DC : DRAFT NOV 2003 | EN 1203 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - TRIPOTASSIUM ORTHOPHOSPHATE |
04/30060336 DC : DRAFT JUL 2004 | EN ISO 23631 - WATER QUALITY - DETERMINATION OF DALAPON, TRICHLOROACETIC ACID AND SELECTED HALOACETIC ACIDS - METHOD USING GAS CHROMATOGRAPHY (GCD-ECD AND/OR GC-MS DETECTION) AFTER LIQUID-LIQUID EXTRACTION AND DERIVATIZATION |
DD ENV 14194:2002 | Foodstuffs. Determination of saxitoxin and dc-saxitoxin in mussels. HPLC method using post column derivatisation |
PREN 2434-3 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 03: FLEXIBLE AND HIGH FLUID RESISTANCE FOR INTERIOR |
DIN EN 1568-1:2016-08 (Draft) | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 1: SPECIFICATION FOR MEDIUM EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
UNE-EN ISO 28706-1:2012 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008) |
UNE-EN 16691:2016 | Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS) |
BS EN ISO 16954:2015 | Dentistry. Test methods for dental unit waterline biofilm treatment |
BS ISO 15373:2001 | Plastics. Polymer dispersions. Determination of free formaldehyde |
02/102698 DC : DRAFT MAY 2002 | PREN 14417 - GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF WETTING-DRYING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
06/30158613 DC : 0 | BS EN 15607 - FOODSTUFFS - DETERMINATION OF D-BIOTIN BY HPLC |
ISO 14255:1998 | Soil quality Determination of nitrate nitrogen, ammonium nitrogen and total soluble nitrogen in air-dry soils using calcium chloride solution as extractant |
DD CEN/TS 839:2008 | Wood preservatives. Determination of the protective effectiveness against wood destroying basidiomycetes. Application by surface treatment |
ISO 17925:2004 | Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry |
BS 2000-237(2005) : 2005 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
BIS IS/ISO 105-E09 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING |
DD CEN/TS 15408:2006 | Solid recovered fuels. Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
I.S. CEN TS 14418:2006 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF FREEZING-THAWING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
04/30083253 DC : DRAFT MAY 2004 | EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
ISO 13438:2004 | Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation |
DIN 38406-8:2004-10 | METHODS FOR EXAMINATION OF WATER, WASTE WATER AND SLUDGE - CATIONS (GROUP E) - PART 8: DETERMINATION OF ZINC - METHOD BY ATOMIC ABSORPTION SPECTROMETRY (AAS) USING AN AIR-ETHINE FLAME (E 8) |
UNI ISO 5794-1 : 2011 | RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 1: NON-RUBBER TESTS |
BS 2000-177(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF ACID NUMBER - POTENTIOMETRIC TITRATION METHOD |
ISO 10136-2:1993 | Glass and glassware — Analysis of extract solutions — Part 2: Determination of sodium oxide and potassium oxide by flame spectrometric methods |
PREN 1429 : DRAFT 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
PREN 13249 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION) |
UNI EN 16024 : 2011 | FERTILIZERS - DETERMINATION OF 1H-1,2,4-TRIAZOLE IN UREA AND IN FERTILIZERS CONTAINING UREA - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
DIN EN ISO 15329:2008-07 | CORROSION OF METALS AND ALLOYS - ANODIC TEST FOR EVALUATION OF INTERGRANULAR CORROSION SUSCEPTIBILITY OF HEAT-TREATABLE ALUMINIUM ALLOYS |
ISO 4531-1:1998 | Vitreous and porcelain enamels Release of lead and cadmium from enamelled ware in contact with food Part 1: Method of test |
UNI ISO 6588-2 : 2013 | PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 2: HOT EXTRACTION |
UNI EN ISO 5667-15 : 2009 | WATER QUALITY - SAMPLING - PART 15: GUIDANCE ON THE PRESERVATION AND HANDLING OF SLUDGE AND SEDIMENT SAMPLES |
DIN EN ISO 439:2010-08 | STEEL AND IRON - DETERMINATION OF TOTAL SILICON CONTENT - GRAVIMETRIC METHOD |
PREN 2434-1 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 01: BASIC REQUIREMENTS |
IP 399 : 2016 | DETERMINATION OF HYDROGEN SULPHIDE IN FUEL OILS |
ISO 6293-2:1998 | Petroleum products Determination of saponification number Part 2: Potentiometric titration method |
ISO 13759:1996 | Petroleum products — Determination of alkyl nitrate in diesel fuels — Spectrometric method |
UNI EN 16400 : 2014 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - HYDROGEN PEROXIDE |
ISO 17190-2:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 2: Determination of amount of residual monomers |
DIN EN 15040 E : 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - ANTISCALANTS FOR MEMBRANES - PHOSPHONIC ACIDS AND SALTS |
DIN EN ISO 5403-2:2012-03 | Leather - Determination of water resistance of flexible leather - Part 2: Repeated angular compression (Maeser) (ISO 5403-2:2011) |
PREN 2435-2 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 02: HIGH CORROSION RESISTANCE |
17/30302216 DC : 0 | BS ISO 19040-3 - WATER QUALITY - DETERMINATION OF THE ESTROGENIC POTENTIAL OF WATER AND WASTE WATER - PART 3: IN VITRO HUMAN CELL-BASED REPORTER GENE ASSAY |
UNE-EN ISO 18218-1:2016 | Leather - Determination of ethoxylated alkylphenols - Part 1: Direct method (ISO 18218-1:2015) |
BS 2000-276(2011) : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF BASE NUMBER - PERCHLORIC ACID POTENTIOMETRIC TITRATION METHOD |
DIN EN 16568:2015-03 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
BS 2000-91(2009) : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
I.S. EN 4195:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF CHROMATE LEACHING |
17/30352986 DC : 0 | BS ISO 18363-3 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF FATTY-ACID-BOUND CHLOROPROPANEDIOLS (MCPDS) AND GLYCIDOL BY GC/MS - PART 3: METHOD USING ACID TRANSESTERIFICATION AND MEASUREMENT FOR 2-MCPD, 3-MCPD AND GLYCIDOL |
UNE-EN ISO 21563:2014 | Dentistry - Hydrocolloid impression materials (ISO 21563:2013) |
DIN EN ISO 21078-1:2008-04 | Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008) |
DIN ISO 20369:2012-10 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content (ISO 20369:2009) |
BS EN ISO 3961:2013 | Animal and vegetable fats and oils. Determination of iodine value |
ONORM EN ISO 10704 : 2015 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD (ISO 10704:2009) |
ISO 14703:2008 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Sample preparation for the determination of particle size distribution of ceramic powders |
UNE-EN ISO 5403-2:2012 | Leather - Determination of water resistance of flexible leather - Part 2: Repeated angular compression (Maeser) (ISO 5403-2:2011) |
ISO 15553:2006 | Water quality Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water |
UNE-EN 16159:2012 | Animal feeding stuffs - Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) |
UNI EN 15561 : 2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN CALCIUM CYANAMIDE CONTAINING NITRATES |
PREN ISO 20795-1 : DRAFT 2012 | DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS (ISO/FDIS 20795-1:2012) |
BS 2000-413(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - LOW LEVELS OF VANADIUM IN LIQUID FUELS - DETERMINATION BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY AFTER ASHING |
PREN 4171 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF PHOSPHORIC ACID INDEX |
PREN ISO 20795-2 : DRAFT 2012 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO/FDIS 20795-2:2012) |
PREN 4159 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO MICROBIAL GROWTH |
I.S. EN ISO 10545-15:1998 | CERAMIC TILES - PART 15: DETERMINATION OF LEAD AND CADMIUM GIVEN OFF BY GLAZED TILES |
PREN 4158 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR MEASUREMENT OF ELECTRICAL SURFACE RESISTANCE OF CONDUCTIVE LAYERS |
I.S. EN ISO 4049:2009 | DENTISTRY - POLYMER-BASED RESTORATIVE MATERIALS |
ECA EURAMET CG-19 : 2012 | GUIDELINES ON THE DETERMINATION OF UNCERTAINTY IN GRAVIMETRIC VOLUME CALIBRATION |
PREN 12173 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM FLUORIDE |
I.S. EN 4503:2013 | AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - TEST METHOD - DETERMINATION OF WATER SOLUBLE CHLORIDE AND SULFATE OF AQUEOUS EXTRACTS |
PREN 13265 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS |
ISO 9940:2015 | Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification |
UNI EN ISO 22288 : 2010 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE VAMP FLEX METHOD |
ISO 20595:2018 | Water quality — Determination of selected highly volatile organic compounds in water — Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS) |
UNE-EN 16024:2011 | Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
UNI EN 15649-1 : 2014 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
UNI EN 15562 : 2009 | FERTILIZERS - DETERMINATION OF CYANAMIDE NITROGEN |
ISO/TS 10719:2016 | Cast irons — Determination of non-combined carbon content — lnfrared absorption method after combustion in an induction furnace |
ISO 4623-1:2000 | Paints and varnishes Determination of resistance to filiform corrosion Part 1: Steel substrates |
I.S. EN ISO 15351:2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
I.S. EN ISO 17694:2016 | FOOTWEAR - TEST METHODS FOR UPPERS AND LINING - FLEX RESISTANCE (ISO 17694:2016) |
API RP 13I : 2009 | RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS |
I.S. EN ISO 5402-1:2017 | LEATHER - DETERMINATION OF FLEX RESISTANCE - PART 1: FLEXOMETER METHOD (ISO 5402-1:2017) |
BS 2000-498(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
BS 2000-386(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - COULOMETRIC KARL FISCHER TITRATION METHOD |
I.S. EN 16693:2015 | WATER QUALITY - DETERMINATION OF ORGANOCHLORINE PESTICIDES (OCP) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY MASS SPECTROMETRY (GC-MS) |
ANSI/AAMI/ISO 10993-14:2001(R2011) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 14: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM CERAMICS |
I.S. EN ISO 13017:2012 | DENTISTRY - MAGNETIC ATTACHMENTS (ISO 13017:2012) |
I.S. EN ISO 28706-1:2011 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 1: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ACIDS AT ROOM TEMPERATURE |
I.S. EN ISO 5667-15:2009 | WATER QUALITY - SAMPLING - PART 15: GUIDANCE ON THE PRESERVATION AND HANDLING OF SLUDGE AND SEDIMENT SAMPLES |
ONORM EN ISO 28319 : 2010 | DENTISTRY - LASER WELDING |
ISO 7203-1:2011 | Fire extinguishing media Foam concentrates Part 1: Specification for low-expansion foam concentrates for top application to water-immiscible liquids |
I.S. EN ISO 19340:2017 | WATER QUALITY - DETERMINATION OF DISSOLVED PERCHLORATE - METHOD USING ION CHROMATOGRAPHY (IC) (ISO 19340:2017) |
ISO 11723:2016 | Solid mineral fuels — Determination of arsenic and selenium — Eschka's mixture and hydride generation method |
I.S. EN ISO 11997-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017) |
ISO 14235:1998 | Soil quality Determination of organic carbon by sulfochromic oxidation |
UNI EN ISO 28706-1 : 2011 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 1: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ACIDS AT ROOM TEMPERATURE |
S.R. CEN/TS 16637-2:2014 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PART 2: HORIZONTAL DYNAMIC SURFACE LEACHING TEST |
UNI EN ISO 12782-4 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 4: EXTRACTION OF HUMIC SUBSTANCES FROM SOLID SAMPLES |
NF EN ISO 15234 : 2011 | PAINTS AND VARNISHES - TESTING OF FORMALDEHYDE-EMITTING COATINGS AND MELAMINE FOAMS - DETERMINATION OF THE STEADY-STATE CONCENTRATION OF FORMALDEHYDE IN A SMALL TEST CHAMBER |
UNE-EN ISO 20795-1:2013 | Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013) |
I.S. EN ISO 4630:2015 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE (ISO 4630:2015) |
ISO 21263:2017 | Slow-release fertilizers — Determination of the release of the nutrients — Method for coated fertilizers |
BS EN 16318 : 2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CHROMIUM(6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
EN 1406:2017 | Chemicals used for treatment of water intended for human consumption - Modified starches |
I.S. EN 14362-3:2012 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 3: DETECTION OF THE USE OF CERTAIN AZO COLORANTS, WHICH MAY RELEASE 4-AMINOAZOBENZENE |
ISO 8070:2007 | Milk and milk products — Determination of calcium, sodium, potassium and magnesium contents — Atomic absorption spectrometric method |
ISO/TS 19392-2:2018 | Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 2: Determination and evaluation of resistance to rain erosion using rotating arm |
I.S. EN 13492:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
I.S. EN 16691:2015 | WATER QUALITY - DETERMINATION OF SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY MASS SPECTROMETRY (GC-MS) |
ISO 1830:2005 | Paper, board and pulps Determination of acid-soluble manganese |
I.S. EN ISO 1135-3:2017 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
I.S. EN ISO 13161:2015 | WATER QUALITY - MEASUREMENT OF POLONIUM 210 ACTIVITY CONCENTRATION IN WATER BY ALPHA SPECTROMETRY (ISO 13161:2011) |
ISO 18068:2014 | Cotton fibres Test method for sugar content Spectrophotometry |
I.S. EN ISO 9917-2:2017 | DENTISTRY - WATER-BASED CEMENTS - PART 2: RESIN-MODIFIED CEMENTS (ISO 9917-2:2017) |
I.S. EN 15476:2009 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO DEVARDA |
PREN 14582 : DRAFT 2015 | CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
I.S. EN 16357:2013 | CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
ISO 13465:2009 | Nuclear energy — Nuclear fuel technology — Determination of neptunium in nitric acid solutions by spectrophotometry |
UNI EN ISO 17226-3 : 2011 | LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 3: DETERMINATION OF FORMALDEHYDE EMISSIONS FROM LEATHER |
ASTM D 5517 : 2014 : REDLINE | Standard Test Method for Determining Extractability of Metals from Art Materials |
S.R. CEN TS 15754:2008 | ANIMAL FEEDING STUFFS - DETERMINATION OF SUGAR CONTENT - HIGH PERFORMANCE EXCHANGE CHROMATOGRAPHIC METHOD (HPAEC-PAD) |
ISO 20126:2012 | Dentistry Manual toothbrushes General requirements and test methods |
PREN 13254 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR THE USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
NF EN ISO 4787 : 2011 | LABORATORY GLASSWARE - VOLUMETRIC INSTRUMENTS - METHODS FOR TESTING OF CAPACITY AND FOR USE |
S.R. CEN/TS 16637-3:2016 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PART 3: HORIZONTAL UP-FLOW PERCOLATION TEST |
UNI EN 15792 : 2009 | ANIMAL FEEDING STUFFS - DETERMINATION OF ZEARALENONE IN ANIMAL FEED - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH FLUORESCENCE DETECTION AND IMMUNOAFFINITY COLUMN CLEAN-UP |
I.S. EN ISO 16050:2011 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1], AND THE TOTAL CONTENT OF AFLATOXINS B[1], B[2], G[1] AND G[2] IN CEREALS, NUTS AND DERIVED PRODUCTS - HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
CEN/TR 10353:2011 | Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry |
ASTM D 7873 : 2013 : EDT 2 | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method) |
I.S. EN 16171:2016 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ELEMENTS USING INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) |
I.S. EN 15835:2010 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
ISO 22960:2008 | Titanium and titanium alloys — Determination of iron — Molecular absorption spectrometry using 1, 10-phenanthroline |
I.S. EN 15411:2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN) |
ISO 14502-2:2005 | Determination of substances characteristic of green and black tea Part 2: Content of catechins in green tea Method using high-performance liquid chromatography |
I.S. EN 62321-3-2:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3-2: SCREENING - TOTAL BROMINE IN POLYMERS AND ELECTRONICS BY COMBUSTION - ION CHROMATOGRAPHY |
I.S. EN 16715:2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
DIN EN ISO 17226-2:2009-09 | LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 2: METHOD USING COLORIMETRIC ANALYSIS |
I.S. EN 16006:2011 | ANIMAL FEEDING STUFFS - DETERMINATION OF THE SUM OF FUMONISIN B1 & B2 IN COMPOUND ANIMAL FEED WITH IMMUNOAFFINITY CLEAN-UP AND RP-HPLC WITH FLUORESCENCE DETECTION AFTER PRE- OR POST-COLUMN DERIVATISATION |
UNI EN ISO 1248 : 2008 | IRON OXIDE PIGMENTS - SPECIFICATIONS AND METHODS OF TEST |
ISO/TR 19686-2:2018 | Petroleum products — Equivalency of test method determining the same property — Part 2: Density of petroleum products |
UNI CEN/TS 16319 : 2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
I.S. EN 15647:2009 | SURFACE ACTIVE AGENTS - DETERMINATION OF THE DISPERSING EFFECT OF SURFACTANTS ON POWDER |
NF EN ISO 14719 : 2012 | CHEMICAL ANALYSIS OF REFRACTORY MATERIAL GLASS AND GLAZES - DETERMINATION OF FE2+ AND FE3+ BY THE SPECTRAL PHOTOMETRIC METHOD WITH 1,10-PHENANTHROLINE |
I.S. EN ISO 15234:2010 | PAINTS AND VARNISHES - TESTING OF FORMALDEHYDE-EMITTING COATINGS AND MELAMINE FOAMS - DETERMINATION OF THE STEADYSTATE CONCENTRATION OF FORMALDEHYDE IN A SMALL TEST CHAMBER |
I.S. EN ISO 12966-4:2015 | ANIMAL AND VEGETABLE FATS AND OILS - GAS CHROMATOGRAPHY OF FATTY ACID METHYL ESTERS - PART 4: DETERMINATION BY CAPILLARY GAS CHROMATOGRAPHY (ISO 12966-4:2015) |
ISO/TS 11405:2015 | Dentistry Testing of adhesion to tooth structure |
I.S. EN 15911:2010 | FOODSTUFFS - SIMULTANEOUS DETERMINATION OF NINE SWEETENERS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY AND EVAPORATIVE LIGHT SCATTERING DETECTION |
ISO 14869-2:2002 | Soil quality — Dissolution for the determination of total element content — Part 2: Dissolution by alkaline fusion |
I.S. EN 16024:2011 | FERTILIZERS - DETERMINATION OF 1H-1,2,4-TRIAZOLE IN UREA AND IN FERTILIZERS CONTAINING UREA - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
PREN 17203 : DRAFT 2017 | FOODSTUFFS - DETERMINATION OF CITRININ IN FOOD BY LIQUID CHROMATOGRAPHY TANDEM MASS SPECTROMETRY (LC-MS/MS) |
ISO 8871-3:2003 | Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count |
I.S. EN ISO 15181-4:2008 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 4: DETERMINATION OF PYRIDINETRIPHENYLBORANE (PTPB) CONCENTRATION IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
ISO 11009:2000 | Petroleum products and lubricants Determination of water washout characteristics of lubricating greases |
ISO 17289:2014 | Water quality — Determination of dissolved oxygen — Optical sensor method |
ISO/TS 16506:2017 | Dentistry — Polymer-based luting materials containing adhesive components |
ONORM EN ISO 4045 : 2008 | LEATHER - CHEMICAL TESTS - DETERMINATION OF PH |
I.S. EN ISO 17698:2016 | FOOTWEAR - TEST METHODS FOR UPPERS - DELAMINATION RESISTANCE (ISO 17698:2016) |
UNE-EN ISO 11206:2013 | Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011) |
BS EN 1406:2017 | Chemicals used for treatment of water intended for human consumption. Modified starches |
ISO 25947-4:2017 | Fireworks — Categories 1, 2 and 3 — Part 4: Test methods |
UNI EN ISO 11640 : 2013 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING |
ONORM EN ISO 5398-3 : 2007 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 3: QUANTIFICATION BY ATOMIC ABSORPTION SPECTROMETRY |
ISO 14892:2002 | Dried skimmed milk — Determination of vitamin D content using high-performance liquid chromatography |
BS ISO 18363-3:2017 | Animal and vegetable fats and oils. Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS Method using acid transesterification and measurement for 2-MCPD, 3-MCPD and glycidol |
ISO/TS 15029-2:2012 | Petroleum and related products Determination of spray ignition characteristics of fire-resistant fluids Part 2: Spray test Stabilized flame heat release method |
BS 2000-538(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD |
PD ISO/TS 19620:2018 | Water quality. Determination of arsenic(III) and arsenic(V) species. Method using high performance liquid chromatography (HPLC) with detection by inductively coupled plasma mass spectrometry (ICP-MS) or hydride generation atomic fluorescence spectrometry (HG-AFS) |
DIN EN ISO 14362-1:2015-06 (Draft) | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 1: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE WITH AND WITHOUT EXTRACTING THE FIBRES (ISO 14362-1:2017) |
ISO 21484:2017 | Nuclear Energy Fuel technology Determination of the O/M ratio in MOX pellets by the gravimetric method |
ISO 17231:2017 | Leather — Physical and mechanical tests — Determination of water repellency of garment leather |
PREN ISO 3826-1 : DRAFT 2010 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 1: CONVENTIONAL CONTAINERS |
NF EN ISO 7783 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD |
DIN EN ISO 19020:2016-09 (Draft) | MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR THE IMMUNOENZYMATIC DETECTION OF STAPHYLOCOCCAL ENTEROTOXINS IN FOODSTUFFS (ISO 19020:2017) |
ISO 13898-3:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 3: Determination of copper content |
I.S. EN 1568-1:2018 | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 1: SPECIFICATION FOR MEDIUM EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
UNI EN ISO 3961 : 2013 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF IODINE VALUE |
I.S. EN ISO 439:2010 | STEEL AND IRON - DETERMINATION OF TOTAL SILICON CONTENT - GRAVIMETRIC METHOD |
EN ISO 11997-1:2017 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017) |
PREN 15028 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORATE |
ISO 5662:1997 | Petroleum products Electrical insulating oils Detection of corrosive sulfur |
EN ISO 3961:2013 | Animal and vegetable fats and oils - Determination of iodine value (ISO 3961:2013) |
DIN EN ISO 5667-3:2013-03 | WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012) |
DIN EN 1400:2014-07 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
UNE-EN ISO 5402-1:2012 | Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402-1:2011) |
I.S. EN ISO 17075-2:2017 | LEATHER - CHEMICAL DETERMINATION OF CHROMIUM(6) CONTENT IN LEATHER - PART 2: CHROMATOGRAPHIC METHOD (ISO 17075-2:2017) |
DD ENV 1122:1995 | Determination of cadmium in plastics with the method of the wet decomposition |
EN ISO 6270-1:2018 | Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017) |
15/30315053 DC : 0 | BS EN 16818 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - MOISTURE DYNAMICS OF WOOD AND WOOD-BASED PRODUCTS |
BS EN ISO 28158:2010 | Dentistry. Integrated dental floss and handles |
UNE-EN ISO 11704:2016 | Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method (ISO 11704:2010) |
I.S. EN 14429:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
UNI CEN/TS 15119-1 : 2008 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DETERMINATION OF EMISSIONS FROM PRESERVATIVE TREATED WOOD TO THE ENVIRONMENT - PART 1: WOOD HELD IN THE STORAGE YARD AFTER TREATMENT AND WOODEN COMMODITIES EXPOSED IN USE CLASS 3 (NOT COVERED, NOT IN CONTACT WITH THE GROUND) - LABORATORY METHOD |
DIN EN 16007:2011-10 | Animal feeding stuffs - Determination of Ochratoxin A in animal feed by immunoaffinity column clean-up and High Performance Liquid Chromatography with fluorescence detection |
17/30360296 DC : 0 | BS EN 17203 - FOODSTUFFS - DETERMINATION OF CITRININ IN FOOD BY LIQUID CHROMATOGRAPHY TANDEM MASS SPECTROMETRY (LC-MS/MS) |
EN ISO 18369-4:2017 | Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties of contact lens materials (ISO 18369-4:2017, Corrected version 2017-10-01) |
S.R. CEN TS 15968:2010 | DETERMINATION OF EXTRACTABLE PERFLUOROOCTANESULPHONATE (PFOS) IN COATED AND IMPREGNATED SOLID ARTICLES, LIQUIDS AND FIRE FIGHTING FOAMS - METHOD FOR SAMPLING, EXTRACTION AND ANALYSIS BY LC-QMS OR LC-TANDEM/MS |
UNI EN ISO 17226-1 : 2008 | LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 1: METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
UNI EN ISO 17072-2 : 2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
I.S. EN 16159:2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF SELENIUM BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HGAAS) AFTER MICROWAVE DIGESTION (DIGESTION WITH 65% NITRIC ACID AND 30% HYDROGEN PEROXIDE) |
I.S. EN ISO 28706-4:2016 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL (ISO 28706-4:2016) |
BS EN ISO 2812-3:2012 | Paints and varnishes. Determination of resistance to liquids Method using an absorbent medium |
UNE-EN ISO 2812-4:2018 | Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017) |
UNE-EN 15950:2011 | Fertilizers - Determination of N-(1,2-dicarboxyethyl)-D,L-aspartic acid (Iminodisuccinic acid, IDHA) using high-performance liquid chromatography (HPLC) |
UNI EN ISO 4045 : 2008 | LEATHER - CHEMICAL TESTS - DETERMINATION OF PH |
NF EN ISO 11260 : 2011 | SOIL QUALITY - DETERMINATION OF EFFECTIVE CATION EXCHANGE CAPACITY AND BASE SATURATION LEVEL USING BARIUM CHLORIDE SOLUTION |
PREN 900 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM HYPOCHLORITE |
NF ISO 9463 : 2009 | NUCLEAR ENERGY - NUCLEAR FUEL TECHNOLOGY - DETERMINATION OF PLUTONIUM IN NITRIC ACID SOLUTIONS BY SPECTROPHOTOMETRY |
PREN 897 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CARBONATE |
BS 2000-41(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
UNE-EN ISO 17072-2:2011 | Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011) |
UNE-EN 16155:2012 | Foodstuffs - Determination of sucralose - High performance liquid chromatographic method |
PREN 49-2 : DRAFT 2015 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST ANOBIUM PUNCTATUM (DE GEER) BY EGG-LAYING AND LARVAL SURVIVAL - PART 2: APPLICATION BY IMPREGNATION (LABORATORY METHOD) |
I.S. EN 15947-4:2015 | PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS |
EN ISO 8199:2007 | Water quality - General guidance on the enumeration of micro-organisms by culture (ISO 8199:2005) |
S.R. CEN/TS 15864:2015 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH CONTINUOUS LEACHANT RENEWAL UNDER CONDITIONS RELEVANT FOR SPECIFIED SCENARIO(S) |
UNE-EN 16006:2011 | Animal feedin stuffs - Determination of the Sum of Fumonisin B1 & B2 in compound animal feed with immunoaffinity clean-up and RP-HPLC with fluorescence detection after pre- or post- column derivatisation |
I.S. EN ISO 11085:2015 | CEREALS, CEREALS-BASED PRODUCTS AND ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT AND TOTAL FAT CONTENT BY THE RANDALL EXTRACTION METHOD (ISO 11085:2015) |
ISO/TS 16878:2010 | Direct reduced iron and hot briquetted iron Determination of metallic iron Iron(III) chloride titrimetric method |
EN 15382:2018 | Geosynthetic barriers - Characteristics required for use in transportation infrastructure |
I.S. EN ISO 8130-3:2010 | COATING POWDERS - PART 3: DETERMINATION OF DENSITY BY LIQUID DISPLACEMENT PYKNOMETER |
ISO 976:2013 | Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH |
ISO 13165-1:2013 | Water quality — Radium-226 — Part 1: Test method using liquid scintillation counting |
ISO 15028:2014 | Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine |
ISO 1562:2004 | Dentistry Casting gold alloys |
I.S. EN ISO 9693:2000 | METAL-CERAMIC DENTAL RESTORATIVE SYSTEMS |
BS EN ISO 12870:2014 | Ophthalmic optics. Spectacle frames. Requirements and test methods |
ISO 17733:2015 | Workplace air Determination of mercury and inorganic mercury compounds Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
ISO 2597-1:2006 | Iron ores Determination of total iron content Part 1: Titrimetric method after tin(II) chloride reduction |
EN 13492:2018 | Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
ISO 4802-2:2016 | Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification |
ISO/TS 17988:2014 | Dentistry Corrosion test methods for dental amalgam |
ISO 28158:2010 | Dentistry Integrated dental floss and handles |
ISO 18321:2015 | Essential oils Determination of peroxide value |
ISO 10705-4:2001 | Water quality — Detection and enumeration of bacteriophages — Part 4: Enumeration of bacteriophages infecting Bacteroides fragilis |
ISO 17092:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions |
ISO 10136-6:1993 | Glass and glassware — Analysis of extract solutions — Part 6: Determination of boron(III) oxide by molecular absorption spectrometry |
ONORM EN ISO 4049 : 2010 | DENTISTRY - POLYMER-BASED FILLING, RESTORATIVE MATERIALS |
ISO 2812-2:2007 | Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
ISO 11260:1994 | Soil quality Determination of effective cation exchange capacity and base saturation level using barium chloride solution |
DIN EN ISO 6246:2016-04 (Draft) | PETROLEUM PRODUCTS - GUM CONTENT OF FUELS - JET EVAPORATION METHOD (ISO 6246:2017) |
ISO 19701:2013 | Methods for sampling and analysis of fire effluents |
EN ISO 16424:2017 | Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements (ISO 16424:2012) |
EN 13368-2:2017 | Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 2: Determination of Fe chelated by [o,o] EDDHA, [o,o] EDDHMA and HBED, or the amount of chelating agents, by ion pair chromatography |
ISO 7206-6:2013 | Implants for surgery — Partial and total hip joint prostheses — Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components |
ISO 16740:2005 | Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide |
ISO 8658:1997 | Carbonaceous materials for use in the production of aluminium — Green and calcined coke — Determination of trace elements by flame atomic absorption spectrometry |
ISO 18363-1:2015 | Animal and vegetable fats and oils Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS Part 1: Method using fast alkaline transesterification and measurement for 3-MCPD and differential measurement for glycidol |
EN 13368-3:2017 | Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 3: Determination of [S,S]-EDDS by ion pair chromatography |
ISO 13357-1:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water |
ISO 24362-1:2014 | Textiles Methods for determination of certain aromatic amines derived from azo colorants Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres |
UNI EN 1568-2 : 2008 | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 2: SPECIFICATION FOR HIGH EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
ISO 11271:2002 | Soil quality — Determination of redox potential — Field method |
ISO/TR 15349-3:1998 | Unalloyed steel Determination of low carbon content Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) |
ISO 18369-3:2017 | Ophthalmic optics — Contact lenses — Part 3: Measurement methods |
EN ISO 4049:2009 | Dentistry - Polymer-based restorative materials (ISO 4049:2009) |
EN 13361:2018 | Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams |
ISO 1409:2006 | Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method |
ISO 13166:2014 | Water quality Uranium isotopes Test method using alpha-spectrometry |
ISO 24293:2009 | Water quality Determination of individual isomers of nonylphenol Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS) |
ISO 15238:2016 | Solid mineral fuels — Determination of total cadmium content of coal |
ISO 11262:2011 | Soil quality — Determination of total cyanide |
BS EN ISO 6872 : 2015 | DENTISTRY - CERAMIC MATERIALS |
EN ISO 17698:2016 | Footwear - Test methods for uppers - Delamination resistance (ISO 17698:2016) |
ISO 15819:2014 | Cosmetics Analytical methods Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS |
ISO 18611-1:2014 | Ships and marine technology Marine NOx reduction agent AUS 40 Part 1: Quality requirements |
UNI EN ISO 28158 : 2010 | DENTISTRY - INTEGRATED DENTAL FLOSS AND HANDLES |
ISO 21458:2008 | Water quality — Determination of glyphosate and AMPA — Method using high performance liquid chromatography (HPLC) and fluorometric detection |
I.S. CEN TS 15410:2006 | SOLID RECOVERED FUELS - METHOD FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI) |
I.S. EN 15829:2010 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CURRANTS, RAISINS, SULTANAS, MIXED DRIED FRUIT AND DRIED FIGS - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
I.S. EN 13368-2:2017 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS IN FERTILIZERS BY CHROMATOGRAPHY - PART 2: DETERMINATION OF FE CHELATED BY [O,O] EDDHA, [O,O] EDDHMA AND HBED, OR THE AMOUNT OF CHELATING AGENTS, BY ION PAIR CHROMATOGRAPHY |
I.S. EN 15560:2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN CALCIUM CYANAMIDE NITRATE FREE |
ISO 13547-1:2014 | Copper, lead, zinc and nickel sulfide concentrates Determination of arsenic Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method |
ISO 17072-1:2011 | Leather Chemical determination of metal content Part 1: Extractable metals |
DIN EN 16086-1:2012-01 | Soil improvers and growing media - Determination of plant response - Part 1: Pot growth test with Chinese cabbage |
ISO 10349-1:2002 | Photography Photographic-grade chemicals Test methods Part 1: General |
ISO 18611-2:2014 | Ships and marine technology Marine NOx reduction agent AUS 40 Part 2: Test methods |
ISO 24362-3:2014 | Textiles Methods for determination of certain aromatic amines derived from azo colorants Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene |
ISO 22962:2008 | Titanium and titanium alloys — Determination of iron — Inductively coupled plasma atomic emission spectrometry |
I.S. EN 13493:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
IWA 15:2015 | Specification and method for the determination of performance of automated liquid handling systems |
ISO 719:1985 | Glass Hydrolytic resistance of glass grains at 98 degrees C Method of test and classification |
I.S. EN ISO 5667-3:2012 | WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012) |
ISO 6270-1:2017 | Paints and varnishes — Determination of resistance to humidity — Part 1: Condensation (single-sided exposure) |
ISO 18252:2006 | Anhydrous milk fat Determination of sterol composition by gas liquid chromatography (Routine method) |
ISO 14869-1:2001 | Soil quality — Dissolution for the determination of total element content — Part 1: Dissolution with hydrofluoric and perchloric acids |
ISO/TS 6733:2006 | Milk and milk products Determination of lead content Graphite furnace atomic absorption spectrometric method |
ISO 21048:2014 | Plastics — Epoxy resins — Determination of 1,2-glycol content |
I.S. EN 15382:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
ISO 18184:2014 | Textiles Determination of antiviral activity of textile products |
ISO 18218-2:2015 | Leather Determination of ethoxylated alkylphenols Part 2: Indirect method |
I.S. EN 15074:2014 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - OZONE |
ISO 17226-1:2008 | Leather Chemical determination of formaldehyde content Part 1: Method using high performance liquid chromatography |
I.S. EN 15845:2010 | PAPER AND BOARD - DETERMINATION OF THE CYTOTOXICITY OF AQUEOUS EXTRACTS |
I.S. EN ISO 17852:2008 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC FLUORESCENCE SPECTROMETRY |
I.S. CWA 14247:2001 | WATER TREATMENT MEMBRANES - INFLUENCE OF MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHOD |
I.S. EN ISO 28706-2:2017 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS (ISO 28706-2:2017) |
I.S. EN ISO 2812-3:2012 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
I.S. CEN TS 15083-1:2005 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DETERMINATION OF THE NATURAL DURABILITY OF SOLID WOOD AGAINST WOOD-DESTROYING FUNGI, TEST METHODS - PART 1: BASIDIOMYCETES |
I.S. EN ISO 4098:2006 | LEATHER - CHEMICAL TESTS - DETERMINATION OF WATER-SOLUBLE MATTER, WATER-SOLUBLE INORGANIC MATTER AND WATER-SOLUBLE ORGANIC MATTER |
I.S. EN ISO 11640:2012 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING (ISO 11640:2012) |
I.S. EN ISO 17234-1:2015 | LEATHER - CHEMICAL TESTS FOR THE DETERMINATION OF CERTAIN AZO COLORANTS IN DYED LEATHERS - PART 1: DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS (ISO 17234-1:2015) |
I.S. EN ISO 23161:2011 | SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD |
ISO 16533:2014 | Textiles Measurement of exothermic and endothermic properties of textiles under humidity change |
ISO 4389:2000 | Tobacco and tobacco products — Determination of organochlorine pesticide residues — Gas chromatographic method |
I.S. EN ISO 105-B07:2009 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B07: COLOUR FASTNESS TO LIGHT OF TEXTILES WETTED WITH ARTIFICIAL PERSPIRATION |
I.S. EN ISO 15193:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
ISO 10203:2017 | Iron ores Determination of calcium Flame atomic absorption spectrometric method |
DIN EN 1390:2006-09 | WOOD PRESERVATIVES - DETERMINATION OF THE ERADICANT ACTION AGAINST HYLOTRUPES BAJULUS (LINNAEUS) LARVAE - LABORATORY METHOD |
I.S. EN ISO 11731-2:2008 | WATER QUALITY - DETECTION AND ENUMERATION OF LEGIONELLA - PART 2: DIRECT MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL COUNTS |
ISO 936:1998 | Meat and meat products Determination of total ash |
ISO 17191:2004 | Urine-absorbing aids for incontinence — Measurement of airborne respirable polyacrylate superabsorbent materials — Determination of dust in collection cassettes by sodium atomic absorption spectrometry |
ISO 11948-2:1998 | Urine-absorbing aids Part 2: Determination of short-time liquid release (leakage) under conditions of light incontinence and low pressure |
BS EN ISO 13938-1:1999 | Textiles. Bursting properties of fabrics Hydraulic method for determination of bursting strength and bursting distension |
DIN EN ISO 20127:2005-06 | DENTISTRY - POWERED TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS |
EN ISO 15091:2012 | Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012) |
ISO 439:1994 | Steel and iron Determination of total silicon content Gravimetric method |
EN ISO 3071:2006 | Textiles - Determination of pH of aqueous extract (ISO 3071:2005) |
I.S. EN ISO 8536-4:2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010) |
DIN EN 12485:2015-08 (Draft) | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS |
DIN EN 12175:2013-08 | Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acid |
BS EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
DIN EN ISO 3107:2011-06 | Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements (ISO 3107:2011) |
DIN EN ISO 11909:2007-05 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
DIN EN 900:2014-09 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM HYPOCHLORITE |
DIN EN 12606-1:2015-11 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
DIN EN ISO 3380:2015-12 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF SHRINKAGE TEMPERATURE UP TO 100 DEGREES C (ISO 3380:2015) |
DIN EN 12823-1:2014-08 | FOODSTUFFS - DETERMINATION OF VITAMIN A BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - PART 1: MEASUREMENT OF ALL-E-RETINOL AND 13-Z-RETINOL |
DIN EN 14132:2009-09 | Foodstuffs - Determination of ochratoxin A in barley and roasted coffee - HPLC method with immunoaffinity column clean-up |
DIN EN ISO 2870:2009-07 | SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF ANIONIC-ACTIVE MATTER HYDROLYZABLE AND NON-HYDROLYZABLE UNDER ACID CONDITIONS |
UNE-EN ISO 20843:2011 | Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011) |
DIN EN 898:2013-02 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROGEN CARBONATE |
DIN EN ISO 8536-4:2013-07 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013) |
DIN EN 13368-1:2014-04 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS IN FERTILIZERS BY CHROMATOGRAPHY - PART 1: DETERMINATION OF EDTA, HEEDTA AND DTPA BY ION CHROMATOGRAPHY |
DIN EN ISO 16408:2015-12 | DENTISTRY - ORAL CARE PRODUCTS - ORAL RINSES (ISO 16408:2015) |
DIN EN ISO 3093:2010-05 | Wheat, rye and their flours, durum wheat and durum wheat semolina - Determination of the falling number according to Hagberg-Perten (ISO 3093:2009) |
DIN EN ISO 13438:2016-10 (Draft) | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO OXIDATION |
DIN EN 14176:2015-05 (Draft) | FOODSTUFFS - DETERMINATION OF DOMOIC ACID IN RAW SHELLFISH, RAW FINFISH AND COOKED MUSSELS BY RP-HPLC USING UV DETECTION |
DIN EN ISO 2810:2004-10 | PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
DIN EN 938:2016-09 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CHLORITE |
BS EN 71-5:2015 | Safety of toys Chemical toys (sets) other than experimental sets |
BS EN ISO 105-E07:2010 | Textiles. Tests for colour fastness Colour fastness to spotting. Water |
ISO 2554:1997 | Plastics — Unsaturated polyester resins — Determination of hydroxyl value |
ISO 11402:2004 | Phenolic, amino and condensation resins — Determination of free-formaldehyde content |
BS EN ISO 5509:2001 | Animal and vegetable fats and oils. Preparation of methyl esters of fatty acids |
BS EN ISO 11214:1996 | Modified starch. Determination of carboxyl group content of oxidized starch |
BS EN 15553:2007 | Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method |
BS EN 1211:2005 | Chemicals used for treatment of water intended for human consumption. Potassium tripolyphosphate |
BS EN ISO 1567:2001 | Dentistry. Denture base polymers |
ISO 8294:1994 | Animal and vegetable fats and oils — Determination of copper, iron and nickel contents — Graphite furnace atomic absorption method |
ISO 3231:1993 | Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
BS EN ISO 17075-1:2017 | Leather. Chemical determination of chromium(VI) content in leather Colorimetric method |
ISO 11085:2015 | Cereals, cereals-based products and animal feeding stuffs Determination of crude fat and total fat content by the Randall extraction method |
ISO/TS 16189:2013 | Footwear Critical substances potentially present in footwear and footwear components Test method to quantitatively determine dimethylformamide in footwear materials |
UNE-EN ISO 1135-4:2016 | Transfusion equipment for medical use - Part 4: Transfusion sets for single use, gravity feed (ISO 1135-4:2015) |
UNE-EN ISO 105-C08:2010 | Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator (ISO 105-C08:2010) |
BS EN ISO 12185:1996 | Methods of test for petroleum and its products. Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method |
BS EN ISO 10993-14:2009 | Biological evaluation of medical devices Identification and quantification of degradation products from ceramics |
BS EN ISO 105-C09:2003 | Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering. Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
UNE-EN 902:2016 | Chemicals used for treatment of water intended for human consumption. Hydrogen peroxide |
UNE-EN 939:2016 | Chemicals used for treatment of water intended for human consumption - Hydrochloric acid |
BS EN 12014-4:2005 | Foodstuffs. Determination of nitrate and/or nitrite content Ion-exchange chromatographic (IC) method for the determination of nitrate and nitrite content of meat products |
ISO 15774:2017 | Animal and vegetable fats and oils — Determination of cadmium content by direct graphite furnace atomic absorption spectrometry |
ISO 10344:1996 | Optics and optical instruments Contact lenses Saline solution for contact lens testing |
PD CEN/TS 15862:2012 | Characterisation of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions |
PD CEN/TS 15863:2012 | Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions |
BS EN ISO 3262-3:1998 | Extenders for paints. Specifications and methods of test Blanc fixe |
BS EN ISO 14182:2000 | Animal feeding stuff. Determination of residues of organophosphorus pesticides. Gas chromatographic method |
BS EN ISO 14402:1999 | Water quality. Determination of phenol index by flow analysis (FIA and CFA) |
ISO 20541:2008 | Milk and milk products — Determination of nitrate content — Method by enzymatic reduction and molecular-absorption spectrometry after Griess reaction |
ISO 10705-2:2000 | Water quality Detection and enumeration of bacteriophages Part 2: Enumeration of somatic coliphages |
BS EN ISO 2870:2009 | Surface active agents. Detergents. Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions |
UNE-EN 901:2013 | Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite |
BS EN ISO 105-Z09:1998 | Textiles. Tests for colour fastness Determination of cold water solubility of water-soluble dyes |
BS EN 13366:2001 | Fertilizers. Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients |
ISO 12228:1999 | Animal and vegetable fats and oils Determination of individual and total sterols contents Gas chromatographic method |
ISO 6869:2000 | Animal feeding stuffs — Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc — Method using atomic absorption spectrometry |
UNE-EN 14582:2016 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
BS EN ISO 14184-1:2011 | Textiles. Determination of formaldehyde Free and hydrolised formaldehyde (water extraction method) |
BS EN ISO 3380:2015 | Leather. Physical and mechanical tests. Determination of shrinkage temperature up to 100 °C |
BS EN 14030:2001 | Geotextiles and geotextile-related products. Screening test method for determining the resistance to acid and alkaline liquids |
BS EN 13435:2002 | Surface active agents. Determination of free amine content of alkyl dimethyl betaines |
ISO 15700:1998 | Leather — Tests for colour fastness — Colour fastness to water spotting |
BS EN 12606-2:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content Method by extraction |
UNE-EN 12672:2016 | Chemicals used for treatment of water intended for human consumption - Potassium permanganate |
UNE-EN ISO 11127-7:2012 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides (ISO 11127-7:2011) |
BS EN 12742:1999 | Fruit and vegetable juices. Determination of free amino acids content. Liquid chromatographic method |
BS EN ISO 2871-2:2010 | Surface active agents. Detergents. Determination of cationic-active matter content Cationic-active matter of low molecular mass (between 200 and 500) |
UNE-EN 16317:2014 | Fertilizers - Determination of trace elements - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
ISO 21563:2013 | Dentistry Hydrocolloid impression materials |
BS EN ISO 13900:2002 | Steel. Determination of boron content. Curcumin spectrophotometric method after distillation |
BS EN 16086-1:2011 | Soil improvers and growing media. Determination of plant response Pot growth test with Chinese cabbage |
BS EN ISO 10344:1998 | Optics and optical instruments. Contact lenses. Saline solution for contact lens testing |
UNE-EN ISO 8537:2016 | Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2016) |
BS EN 12122:2005 | Chemicals used for treatment of water intended for human consumption. Ammonia solution |
ONORM EN ISO 10873 : 2010 | DENTISTRY - DENTURE ADHESIVES |
ISO 7218:2007 | Microbiology of food and animal feeding stuffs — General requirements and guidance for microbiological examinations |
ISO 10993-13:2010 | Biological evaluation of medical devices — Part 13: Identification and quantification of degradation products from polymeric medical devices |
UNE-EN 13038:2012 | Soil improvers and growing media - Determination of electrical conductivity |
BS EN ISO 2554:1999 | Plastics. Unsaturated polyester resins. Determination of hydroxyl value |
BS EN ISO 3107:2011 | Dentistry. Zinc oxide/eugenol cements and zinc oxide/ non-eugenol cements |
BS EN ISO 10705-2:2001 | Water quality. Detection and enumeration of bacteriophages Enumeration of somatic coliphages |
BS EN ISO 11244:2000 | Dental brazing investments |
ISO 835:2007 | Laboratory glassware — Graduated pipettes |
ISO 2871-2:2010 | Surface active agents — Detergents — Determination of cationic-active matter content — Part 2: Cationic-active matter of low molecular mass (between 200 and 500) |
BS EN 1421:2012 | Chemicals used for treatment of water intended for human consumption. Ammonium chloride |
BS EN 15168:2006 | Surface active agents. Determination of hydroxyl value. p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide |
BS EN ISO 7886-2:1997 | Sterile hypodermic syringes for single use Syringes for use with power-driven syringe pumps |
ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
ISO 10280:1991 | Steel and iron — Determination of titanium content — Diantipyrylmethane spectrometric method |
UNE-EN 12678:2016 | Chemical used for treatment of water intended for human consumption - Potassium peroxomonosulfate |
BS EN 12932:2015 | Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, dihydrate |
BS EN ISO 7783-1:2000 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of water-vapour transmission rate of free films (dish method) |
ISO 18218-1:2015 | Leather — Determination of ethoxylated alkylphenols — Part 1: Direct method |
UNE-EN ISO 9936:2016 | Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography (ISO 9936:2016) |
BS EN ISO 3262-1:1998 | Extenders for paints. Specifications and methods of test Introduction and general test methods |
ISO 28706-2:2017 | Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours |
ISO 11609:2017 | Dentistry — Dentifrices — Requirements, test methods and marking |
ISO/TS 21268-3:2007 | Soil quality Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 3: Up-flow percolation test |
UNE-EN ISO 6885:2016 | Animal and vegetable fats and oils - Determination of anisidine value (ISO 6885:2016) |
BS EN ISO 12205:1996 | Methods of test for petroleum and its products. Petroleum products. Determination of the oxidation stability of middle-distillate fuels |
BS EN 15484:2007 | Ethanol as a blending component for petrol. Determination of inorganic chloride. Potentiometric method |
BS EN 1787:2000 | Foodstuffs. Detection of irradiated food containing cellulose by ESR spectroscopy |
ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
ISO/TS 21268-2:2007 | Soil quality Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter |
ISO 16198:2015 | Soil quality Plant-based test to assess the environmental bioavailability of trace elements to plants |
ISO 28888:2013 | Dentistry — Screening method for erosion potential of oral rinses on dental hard tissues |
BS EN 14242:2004 | Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectral analysis |
BS EN 14152:2014 | Foodstuffs. Determination of vitamin B2 by high performance liquid chromatography |
ISO 105-C08:2010 | Textiles Tests for colour fastness Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator |
ISO 105-C09:2001 | Textiles — Tests for colour fastness — Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
BS EN 1410:2008 | Chemicals used for treatment of water intended for human consumption. Cationic polyacrylamides |
BS EN 113:1997 | Wood preservatives. Test method for determining the protective effectiveness against wood destroying basidiomycetes. Determination of the toxic values |
ISO 16744:2003 | Dentistry Base metal materials for fixed dental restorations |
ISO 8502-12:2003 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 12: Field method for the titrimetric determination of water-soluble ferrous ions |
EN ISO 14088:2012 | Leather - Chemical tests - Quantitative analysis of tanning agents by filter method (ISO 14088:2012) |
BS EN 1911-2:1998 | Stationary source emissions. Manual method of determination of HCI Gaseous compounds absorption |
BS EN ISO 11127-6:2011 | Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives Determination of water-soluble contaminants by conductivity measurement |
ISO 1135-3:2016 | Transfusion equipment for medical use Part 3: Blood-taking sets for single use |
ISO 3262-17:2000 | Extenders for paints — Specifications and methods of test — Part 17: Precipitated calcium silicate |
BS EN 15062:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
ISO 9073-11:2002 | Textiles — Test methods for nonwovens — Part 11: Run-off |
BS EN 1784:2003 | Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic analysis of hydrocarbons |
BS EN 13255:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals |
BS EN 1400-2:2002 | Child use and care articles. Soothers for babies and young children Mechanical requirements and tests |
BS EN 1206:2005 | Chemicals used for treatment of water intended for human consumption. Tetrasodium pyrophosphate |
BS EN ISO 15711:2004 | Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water |
ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
ISO 3826-1:2013 | Plastics collapsible containers for human blood and blood components Part 1: Conventional containers |
ISO 29022:2013 | Dentistry — Adhesion — Notched-edge shear bond strength test |
BS EN 14881:2005 | Surface active agents. Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines. Gas chromatographic method |
BS EN ISO 7899-2:2000 | Water quality. Detection and enumeration of intestinal enterococci in surface and waste water Membrane filtration method |
BS EN ISO 105-E12:2010 | Textiles. Tests for colour fastness Colour fastness to milling. Alkaline milling |
BS EN ISO 8799:2009 | Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Determination of content of unsulfated matter |
BS EN 12174:2013 | Chemicals used for treatment of water intended for human consumption. Sodium hexafluorosilicate |
ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
ISO 9073-16:2007 | Textiles Test methods for nonwovens Part 16: Determination of resistance to penetration by water (hydrostatic pressure) |
ISO 9963-1:1994 | Water quality Determination of alkalinity Part 1: Determination of total and composite alkalinity |
ISO 4583:1998 | Plastics Epoxy resins and related materials Determination of easily saponifiable chlorine |
BS EN 1897:2001 | Geotextiles and geotextile-related products. Determination of the compressive creep properties |
BS EN 12875-5:2006 | Mechanical dishwashing resistance of utensils Rapid test for ceramic catering articles |
ISO 11213:1995 | Modified starch Determination of acetyl content Enzymatic method |
ISO 4934:2003 | Steel and iron Determination of sulfur content Gravimetric method |
BS EN 1428:2012 | Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Azeotropic distillation method |
BS EN 14668:2005 | Surface active agents. Determination of quaternary ammonium surface active agents in raw materials and formulated products. Potentiometric two-phase titration method |
BS EN ISO 15320:2011 | Pulp, paper and board. Determination of pentachlorophenol in an aqueous extract |
BS EN ISO 7253:2001 | Paints and varnishes. Determination of resistance to neutral salt spray (fog) |
ISO 18465:2017 | Microbiology of the food chain — Quantitative determination of emetic toxin (cereulide) using LC-MS/MS |
ISO 10720:1997 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas |
EN ISO 28399:2011 | Dentistry - Products for external tooth bleaching (ISO 28399:2011) |
BS EN 12868:2017 | Child use and care articles. Method for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers |
ISO 16408:2015 | Dentistry — Oral care products — Oral rinses |
ISO 105-Z04:1995 | Textiles — Tests for colour fastness — Part Z04: Dispersibility of disperse dyes |
ISO 3262-8:1999 | Extenders for paints — Specifications and methods of test — Part 8: Natural clay |
ISO 14403:2002 | Water quality Determination of total cyanide and free cyanide by continuous flow analysis |
ISO 7711-1:1997 | Dental rotary instruments Diamond instruments Part 1: Dimensions, requirements, marking and packaging |
BS EN 902:2009 | Chemicals used for treatment of water intended for human consumption. Hydrogen peroxide |
DIN EN ISO 105-E04:2013-08 | Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013) |
BS EN 12926:2015 | Chemicals used for treatment of water intended for human consumption. Sodium peroxodisulfate |
ISO 14403-2:2012 | Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) — Part 2: Method using continuous flow analysis (CFA) |
ISO 14902:2001 | Animal feeding stuffs — Determination of trypsin inhibitor activity of soya products |
BS EN 16502:2014 | Test method for the determination of the degree of soil acidity according to Baumann-Gully |
DIN EN ISO 9167-1:2013-12 | RAPESEED - DETERMINATION OF GLUCOSINOLATE CONTENT - PART 1: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 9167-1:1992 + AMD 1:2013) |
BS EN ISO 4263-2:2003 | Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test Procedure for category HFC hydraulic fluids |
BS EN 12121:2012 | Chemicals used for treatment of water intended for human consumption. Sodium disulfite |
BS EN ISO 8294:2000 | Animal and vegetable fats and oils. Determination of copper, iron and nickel contents. Graphite furnace atomic absorption method |
ISO 5403-2:2011 | Leather — Determination of water resistance of flexible leather — Part 2: Repeated angular compression (Maeser) |
ISO 3262-15:2000 | Extenders for paints — Specifications and methods of test — Part 15: Vitreous silica |
ISO 3262-22:2001 | Extenders for paints — Specifications and methods of test — Part 22: Flux-calcined kieselguhr |
BS EN 1019:2005 | Chemicals used for treatment of water intended for human consumption. Sulfur dioxide |
BS EN ISO 14403:2002 | Water quality. Determination of total cyanide and free cyanide by continuous flow analysis |
BS EN 13138-2:2014 | Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be held |
UNE-EN 13138-3:2015 | Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn |
UNE-EN 12931:2015 | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous |
ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
BS EN 14480:2004 | Surface active agents. Determination of anionic surface active agents. Potentiometric two-phase titration method |
UNE-EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
BS EN 1014-4:2010 | Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis Determination of the water-extractable phenols content of creosote |
BS EN ISO 20763:2004 | Petroleum and related products. Determination of anti-wear properties of hydraulic fluids. Vane pump method |
BS EN 13252:2016 | Geotextiles and geotextile-related products. Characteristics required for use in drainage systems |
ISO 16954:2015 | Dentistry — Test methods for dental unit waterline biofilm treatment |
BS EN 13194:2015 | Chemicals used for treatment of water intended for human consumption. Acetic Acid |
BS EN ISO 4934:2003 | Steel and iron. Determination of sulfur content. Gravimetric method |
BS EN 1788:2001 | Foodstuffs. Thermoluminescence detection of irradiated food from which silicate minerals can be isolated |
BS EN 939:2009 | Chemicals used for treatment of water intended for human consumption. Hydrochloric acid |
BS EN ISO 11402:2005 | Phenolic, amino and condensation resins. Determination of free-formaldehyde content |
BS EN ISO 105-Z08:1998 | Textiles. Tests for colour fastness Determination of solubility and solution stability of reactive dyes in the presence of electrolytes |
UNE-EN 12945:2015 | Liming materials - Determination of neutralizing value - Titrimetric methods |
BS EN ISO 16408:2015 | Dentistry. Oral care products. Oral rinses |
BS EN ISO 1562:2004 | Dentistry. Casting gold alloys |
UNE-EN 16319:2015 | Fertilizers - Determination of trace elements - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
UNE-EN ISO 11133:2014 | Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media (ISO 11133:2014) |
BS EN ISO 16588 : 2003 | WATER QUALITY - DETERMINATION OF SIX COMPLEXING AGENTS - GAS-CHROMATOGRAPHIC METHOD |
BS EN 12632:1999 | Fruit and vegetable juices. Enzymatic determination of acetic acid (acetate) content. NAD spectrometric method |
BS EN 14671:2006 | Characterization of sludges. Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride |
BS EN 896:2012 | Chemicals used for treatment of water intended for human consumption. Sodium hydroxide |
BS EN ISO 3826-1:2013 | Plastics collapsible containers for human blood and blood components Conventional containers |
BS EN 15488:2007 | Ethanol as a blending component for petrol. Determination of copper content. Graphite furnace atomic absorption spectrometric method |
I.S. EN 1390:2006 | WOOD PRESERVATIVES - DETERMINATION OF THE ERADICANT ACTION AGAINST HYLOTRUPES BAJULUS (LINNAEUS) LARVAE - LABORATORY METHOD |
UNE-EN ISO 11997-2:2014 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
ISO 22288:2006 | Leather Physical and mechanical tests Determination of flex resistance by the vamp flex method |
BS EN 15109:2006 | Surface active agents. Determination of the active matter content of alkylamidopropylbetaines |
UNE-EN ISO 10139-2:2016 | Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2016) |
BS EN 1199:2005 | Chemicals used for treatment of water intended for human consumption. Disodium hydrogen orthophosphate |
BS EN ISO 20843:2011 | Petroleum and related products. Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC |
BS EN ISO 3262-17:2000 | Extenders for paints. Specifications and methods of test Precipitated calcium silicate |
BS EN ISO 14181 : 2001 | METHODS FOR ANALYSIS OF ANIMAL FEEDING STUFFS - DETERMINATION OF RESIDUES OF ORGANOCHLORINE PESTICIDES - GAS CHROMATOGRAPHIC METHOD |
UNE-EN 14122:2014 | Foodstuffs - Determination of vitamin B1 by high performance liquid chromatography |
ISO 20783-1:2011 | Petroleum and related products Determination of emulsion stability of fire-resistant fluids Part 1: Fluids in category HFAE |
BS EN 14582:2007 | Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods |
BS EN 12126:2012 | Chemicals used for treatment of water intended for human consumption. Liquefied ammonia |
BS EN 118:2013 | Wood preservatives. Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) |
UNE-EN ISO 10271:2012 | Dental metallic materials - Corrosion test methods (ISO 10271:2011) |
ISO 16591:2010 | Petroleum products Determination of sulfur content Oxidative microcoulometry method |
BS EN 13955:2002 | Surface active agents. Determination of Krafft point and solubility of ionic surface active agents |
BS EN 12911:2013 | Products used for treatment of water intended for human consumption. Manganese greensand |
BS EN 46-2:2016 | Wood preservatives. Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) Ovicidal effect (laboratory method) |
UNE-EN 1421:2013 | Chemicals used for treatment of water intended for human consumption - Ammonium chloride |
BS EN 13267:2001 | Surface active agents. Determination of water content. Karl Fischer method |
UNE-EN ISO 13161:2016 | Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011) |
BS EN ISO 6873:2013 | Dentistry. Gypsum products |
BS EN ISO 7785-1:1999 | Dental handpieces High-speed air turbine handpieces |
BS EN 12631:1999 | Fruit and vegetable juices. Enzymatic determination of D- and L-lactic acid (lactate) content. NAD spectrometric method |
BS EN ISO 21606:2007 | Dentistry. Elastomeric auxiliaries for use in orthodontics |
BS EN ISO 15061:2001 | Water quality. Determination of dissolved bromate. Method by liquid chromatography of ions |
UNE-EN 118:2014 | Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) |
ISO 8655-2:2002 | Piston-operated volumetric apparatus Part 2: Piston pipettes |
ISO 1248:2006 | Iron oxide pigments Specifications and methods of test |
BS EN 14350-2:2004 | Child use and care articles. Drinking equipment Chemical requirements and test methods |
BS EN 14833:2005 | Petroleum and related products. Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
BS EN ISO 7785-2:1998 | Dental handpieces Straight and geared angle handpieces |
BS EN 13585:2002 | Foodstuffs. Determination of fumonisins B1 and B2 in maize. HPLC method with solid phase extraction clean-up |
ISO 11498:1997 | Dental handpieces Dental low-voltage electrical motors |
BS EN 13037:2011 | Soil improvers and growing media. Determination of pH |
UNE-EN ISO 12228-1:2014 | Determination of individual and total sterols contents - Gas chromatographic method - Part 1: Animal and vegetable fats and oils (ISO 12228-1:2014) |
UNE-EN 12822:2014 | Foodstuffs - Determination of vitamin E by high performance liquid chromatography - Measurement of a-, ß-, ¿- and d-tocopherol |
UNE-EN 896:2013 | Chemicals used for treatment of water intended for human consumption - Sodium hydroxide |
UNE-EN 12126:2013 | Chemicals used for treatment of water intended for human consumption - Liquefied ammonia |
ISO 14181:2000 | Animal feeding stuffs Determination of residues of organochlorine pesticides Gas chromatographic method |
BS EN 15863:2015 | Characterization of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
BS EN ISO 11245:2000 | Dental restorations. Phosphate-bonded refractory die materials |
ISO 4263-1:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils |
IEC 62321:2008 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
BS EN ISO 11507:2007 | Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water |
BS EN 14254:2004 | In vitro diagnostic medical devices. Single-use receptacles for the collection of specimens, other than blood, from humans |
UNE-EN ISO 15320:2012 | Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011) |
ISO 1135-4:2015 | Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed |
ISO 6461-1:1986 | Water quality Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) Part 1: Method by enrichment in a liquid medium |
UNE-EN 12606-1:2015 | Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation |
BS EN 12915-1:2009 | Products used for the treatment of water intended for human consumption. Granular activated carbon Virgin granular activated carbon |
UNE-EN 46-1:2016 | Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method) |
DIN EN ISO 21606:2007-10 | Dentistry - Elastomeric auxiliaries for use in orthodontics (ISO 21606:2007) |
ISO 8795:2001 | Plastics piping systems for the transport of water intended for human consumption — Migration assessment — Determination of migration values of plastics pipes and fittings and their joints |
ISO 8502-8:2001 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 8: Field method for the refractometric determination of moisture |
BS EN 1122:2001 | Plastics. Determination of cadmium. Wet decomposition method |
UNE-EN ISO 10319:2015 | Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
UNE-EN 47:2016 | Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) |
ISO 8502-2:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces |
BS EN ISO 8537:2016 | Sterile single-use syringes, with or without needle, for insulin |
BS EN 1014-3:2010 | Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis Determination of the benzo(a)pyrene content of creosote |
UNE-EN 13176:2015 | Chemicals used for treatment of water intended for human consumption - Ethanol |
BS EN 898:2012 | Chemicals used for treatment of water intended for human consumption. Sodium hydrogen carbonate |
ISO 8891:1998 | Dental casting alloys with noble metal content of at least 25 % but less than 75 % |
ISO 10309:1994 | Metallic coatings Porosity tests Ferroxyl test |
BS EN ISO 8795:2001 | Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes and fittings and their joints |
BS EN ISO 3071:2006 | Textiles. Determination of pH of aqueous extract |
BS EN 15195:2014 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
BS EN ISO 16264:2004 | Water quality. Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection |
BS EN ISO 10714:2002 | Steel and iron. Determination of phosphorus content. Phosphovanadomolybdate spectrophotometric method |
ISO 2811-4:2011 | Paints and varnishes Determination of density Part 4: Pressure cup method |
ISO 10993-14:2001 | Biological evaluation of medical devices — Part 14: Identification and quantification of degradation products from ceramics |
BS EN 14672:2005 | Characterization of sludges. Determination of total phosphorous |
BS EN ISO 21530:2004 | Dentistry. Materials used for dental equipment surfaces. Determination of resistance to chemical disinfectants |
UNE-EN 46-2:2016 | Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method) |
ISO 7785-1:1997 | Dental handpieces Part 1: High-speed air turbine handpieces |
BS EN ISO 105-G01:2016 | Textiles. Tests for colour fastness Colour fastness to nitrogen oxides |
UNE-EN 13252:2017 | Geotextiles and geotextile-related products - Characteristics required for use in drainage systems |
ISO 16050:2003 | Foodstuffs Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products High-performance liquid chromatographic method |
UNE-EN ISO 3826-1:2013 | Plastics collapsible containers for human blood and blood components - Part 1: Conventional containers (ISO 3826-1:2013) |
ISO 15181-2:2007 | Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate |
BS EN 14652 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
BS EN ISO 8502-5:2004 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) |
UNE-EN 15550:2018 | Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion |
ISO 23631:2006 | Water quality — Determination of dalapon, trichloroacetic acid and selected haloacetic acids — Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization |
ISO 2114:2000 | Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value |
ISO 7864:2016 | Sterile hypodermic needles for single use — Requirements and test methods |
ISO 12782-1:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid |
ISO 3262-3:1998 | Extenders for paints — Specifications and methods of test — Part 3: Blanc fixe |
ISO 105-Z08:1995 | Textiles — Tests for colour fastness — Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes |
ISO 8799:2009 | Surface active agents — Sulfated ethoxylated alcohols and alkylphenols — Determination of content of unsulfated matter |
ISO 16784-2:2006 | Corrosion of metals and alloys Corrosion and fouling in industrial cooling water systems Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig |
ISO 5529:2007 | Wheat — Determination of the sedimentation index — Zeleny test |
ISO 3823-2:2003 | Dentistry — Rotary bur instruments — Part 2: Finishing burs |
ISO 5163:2014 | Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method |
ISO 8655-4:2002 | Piston-operated volumetric apparatus Part 4: Dilutors |
BS EN ISO 8655-4:2002 | Piston-operated volumetric apparatus Dilutors |
BS EN 15192:2006 | Characterisation of waste and soil. Determination of chromium (VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
BS EN 13257:2016 | Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals |
UNE-EN 13254:2017 | Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams |
ISO 11215:1998 | Modified starch — Determination of adipic acid content of acetylated di-starch adipates — Gas chromatographic method |
ISO 16373-1:2015 | Textiles Dyestuffs Part 1: General principles of testing coloured textiles for dyestuff identification |
ISO 5667-15:2009 | Water quality — Sampling — Part 15: Guidance on the preservation and handling of sludge and sediment samples |
BS EN 13335:2002 | Leather. Physical and mechanical tests. Determination of flex resistance by the vamp flex method |
ISO 11997-2:2013 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light |
ISO 17229:2016 | Leather Physical and mechanical tests Determination of water vapour absorption |
ISO 15681-1:2003 | Water quality — Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) — Part 1: Method by flow injection analysis (FIA) |
ISO 10139-2:2016 | Dentistry Soft lining materials for removable dentures Part 2: Materials for long-term use |
BS EN ISO 105-E16:2007 | Textiles. Tests for colour fastness Colour fastness to water spotting on upholstery fabrics |
UNE-EN 13255:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals |
ISO 17353:2004 | Water quality — Determination of selected organotin compounds — Gas chromatographic method |
ISO 21627-3:2009 | Plastics Epoxy resins Determination of chlorine content Part 3: Total chlorine |
ISO 10539:2002 | Animal and vegetable fats and oils — Determination of alkalinity |
UNE-EN ISO 4049:2010 | Dentistry - Polymer-based restorative materials (ISO 4049:2009) |
BS EN 14185-1:2003 | Non-fatty food. Determination of N-methylcarbamate residues HPLC-method with SPE clean-up |
UNE 56810 :2002 | Wood flooring. Installation. Specifications. |
ISO 591-1:2000 | Titanium dioxide pigments for paints Part 1: Specifications and methods of test |
ISO 15710:2002 | Paints and varnishes — Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
ISO 12687:1996 | Metallic coatings Porosity tests Humid sulfur (flowers of sulfur) test |
ISO 9073-12:2002 | Textiles — Test methods for nonwovens — Part 12: Demand absorbency |
ISO/TS 21268-1:2007 | Soil quality Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter |
BS EN ISO 3262-9:1998 | Extenders for paints. Specifications and methods of test Calcined clay |
ISO 22674:2016 | Dentistry — Metallic materials for fixed and removable restorations and appliances |
ISO 6744-4:1999 | Binders for paints and varnishes — Alkyd resins — Part 4: Determination of fatty acid content |
ISO 19020:2017 | Microbiology of the food chain — Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs |
ISO 12782-3:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid |
BS EN 1208:2005 | Chemicals used for treatment of water intended for human consumption. Sodium calcium polyphosphate |
BS EN ISO 8502-8:2004 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Field method for the refractometric determination of moisture |
BS EN 12136:1998 | Fruit and vegetable juices. Determination of total carotenoid content and individual carotenoid fractions |
UNE-EN ISO 105-A01:2010 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
UNE-EN ISO 17070:2015 | Leather - Chemical tests - Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content (ISO 17070:2015) |
ISO 8502-5:1998 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) |
ISO 3823-1:1997 | Dental rotary instruments — Burs — Part 1: Steel and carbide burs |
BS EN 13265:2016 | Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects |
UNE-EN 12595:2015 | Bitumen and bituminous binders - Determination of kinematic viscosity |
ISO 105-E02:2013 | Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water |
ONORM EN 16087-1 : 2011 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF THE AEROBIC BIOLOGICAL ACTIVITY - PART 1: OXYGEN UPTAKE RATE (OUR) |
ISO 13757:1996 | Liquefied petroleum gases — Determination of oily residues — High-temperature method |
ISO 17294-1:2004 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines |
UNE-EN 13265:2017 | Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects |
ISO 15587-1:2002 | Water quality — Digestion for the determination of selected elements in water — Part 1: Aqua regia digestion |
ISO/TS 21268-4:2007 | Soil quality Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 4: Influence of pH on leaching with initial acid/base addition |
BS EN 12678:2008 | Chemicals used for treatment of water intended for human consumption. Potassium peroxomonosulfate |
BS EN 15489:2007 | Ethanol as a blending component for petrol. Determination of water content. Karl Fischer coulometric titration method |
BS EN ISO 8655-5:2002 | Piston-operated volumetric apparatus Dispensers |
ISO 11998:2006 | Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings |
ISO 8290:1998 | Vitreous and porcelain enamels Determination of resistance to sulfuric acid at room temperature |
ISO 3262-19:2000 | Extenders for paints Specifications and methods of test Part 19: Precipitated silica |
ISO 17070:2015 | Leather — Chemical tests — Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content |
BS EN ISO 18857-1:2006 | Water quality. Determination of selected alkylphenols. Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection |
BS EN 13266:2001 | Slow-release fertilizers. Determination of the release of the nutrients. Method for coated fertilizers |
BS EN ISO 15681-1:2004 | Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Method by flow injection analysis (FIA) |
BS EN ISO 15703:1999 | Leather. Tests for colour fastness. Colour fastness to mild washing |
ISO 4629-1:2016 | Binders for paints and varnishes — Determination of hydroxyl value — Part 1: Titrimetric method without using a catalyst |
ISO 15212-1:1998 | Oscillation-type density meters Part 1: Laboratory instruments |
ISO 11642:2012 | Leather — Tests for colour fastness — Colour fastness to water |
ISO 4263-3:2015 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids |
BS EN ISO 7491:2000 | Dental materials. Determination of colour stability |
ISO 16265:2009 | Water quality — Determination of the methylene blue active substances (MBAS) index — Method using continuous flow analysis (CFA) |
UNE-EN 12596:2015 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
ISO 15193:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures |
ISO 15351:1999 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
ISO 16266:2006 | Water quality Detection and enumeration of Pseudomonas aeruginosa Method by membrane filtration |
ISO 11909:2007 | Binders for paints and varnishes — Polyisocyanate resins — General methods of test |
BS EN ISO 8655-3:2002 | Piston-operated volumetric apparatus Piston burettes |
BS EN ISO 8192:2007 | Water quality. Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation |
ISO 11206:2011 | Water quality — Determination of dissolved bromate — Method using ion chromatography (IC) and post column reaction (PCR) |
UNE-EN ISO 5164:2014 | Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014) |
BS EN ISO 3630-1:2008 | Dentistry. Root-canal instruments General requirements and test methods |
IEC 60754-1:2011 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content |
ISO 3262-5:1998 | Extenders for paints — Specifications and methods of test — Part 5: Natural crystalline calcium carbonate |
ISO 3380:2015 | Leather — Physical and mechanical tests — Determination of shrinkage temperature up to 100 °C |
UNE-EN ISO 21627-1:2010 | Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009) |
DIN EN ISO 10993-13:2010-11 | Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:2010) |
BS EN 14898 : 2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ACTIVE MEDIA FILTERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
DIN EN 15550:2016-11 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
BS EN 1405:2009 | Chemicals used for treatment of water intended for human consumption. Sodium alginate |
BS EN 1429:2013 | Bitumen and bituminous binders. Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
ISO 28723:2008 | Vitreous and porcelain enamels — Determination of the edge covering on enamelled steel plate to be used in heat exchangers |
ISO 28706-5:2010 | Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 5: Determination of resistance to chemical corrosion in closed systems |
ISO 9562:2004 | Water quality — Determination of adsorbable organically bound halogens (AOX) |
BS EN ISO 17375:2006 | Animal feeding stuffs. Determination of aflatoxin B<sub>1</sub> |
ISO 14403-1:2012 | Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) — Part 1: Method using flow injection analysis (FIA) |
ISO 15912:2016 | Dentistry Refractory investment and die material |
ISO 17375:2006 | Animal feeding stuffs — Determination of aflatoxin B1 |
ISO 6871-1:1994 | Dental base metal casting alloys — Part 1: Cobalt-based alloys |
ISO 6876:2012 | Dentistry — Root canal sealing materials |
ISO 15181-3:2007 | Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract |
BS EN ISO 3262-4:1998 | Extenders for paints. Specifications and methods of test Whiting |
BS EN 13256:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures |
BS EN 14483-5:2004 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion in closed systems |
ISO 6271:2015 | Clear liquids Estimation of colour by the platinum-cobalt colour scale |
ISO 17234-1:2015 | Leather Chemical tests for the determination of certain azo colorants in dyed leathers Part 1: Determination of certain aromatic amines derived from azo colorants |
ISO 17075:2007 | Leather Chemical tests Determination of chromium(VI) content |
ISO 10321:2008 | Geosynthetics — Tensile test for joints/seams by wide-width strip method |
ISO 14088:2012 | Leather Chemical tests Quantitative analysis of tanning agents by filter method |
ISO 17700:2004 | Footwear Test methods for uppers, linings and insocks Colour fastness to rubbing |
ISO 1567:1999 | Dentistry Denture base polymers |
DIN EN ISO 105-E01:2013-06 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER (ISO 105-E01:2013) |
BS EN ISO 105-E03:2010 | Textiles. Tests for colour fastness Colour fastness to chlorinated water (swimming-pool water) |
BS EN ISO 14565:2001 | Animal feeding stuffs. Determination of vitamin A content. Method using high-performance liquid chromatography |
BS EN 1240:1998 | Adhesives. Determination of hydroxyl value and/or hydroxyl content |
ISO 6251:1996 | Liquefied petroleum gases — Corrosiveness to copper — Copper strip test |
ISO 16187:2013 | Footwear and footwear components Test method to assess antibacterial activity |
ISO 3262-1:1997 | Extenders for paints — Specifications and methods of test — Part 1: Introduction and general test methods |
BS EN ISO 3262-20:2000 | Extenders for paints. Specifications and methods of test Fumed silica |
ISO 13078-2:2016 | Dentistry Dental furnace Part 2: Test method for evaluation of furnace programme via firing glaze |
ISO 105-Z09:1995 | Textiles — Tests for colour fastness — Part Z09: Determination of cold water solubility of water-soluble dyes |
ISO 15329:2006 | Corrosion of metals and alloys Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys |
ISO 22254:2005 | Dentistry — Manual toothbrushes — Resistance of tufted portion to deflection |
BS EN 937:2009 | Chemicals used for treatment of water intended for human consumption. Chlorine |
BS EN 12850:2009 | Bitumen and bituminous binders. Determination of the pH value of bituminous emulsions |
BS EN 12945 : 2014 | LIMING MATERIALS - DETERMINATION OF NEUTRALIZING VALUE - TITRIMETRIC METHODS |
ISO 10416:2008 | Petroleum and natural gas industries — Drilling fluids — Laboratory testing |
ISO 483:2005 | Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value |
ISO 11732:2005 | Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection |
ISO 13938-2:1999 | Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension |
ISO 19074:2015 | Leather — Physical and mechanical tests — Determination of water absorption by capillary action (wicking) |
ISO 20843:2011 | Petroleum and related products Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC |
ISO 105-E16:2006 | Textiles Tests for colour fastness Part E16: Colour fastness to water spotting on upholstery fabrics |
BS EN 1409:2008 | Chemicals used for water treatment intended for human consumption. Polyamines |
BS EN 1785:2003 | Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones |
ISO 4938:2016 | Steel and iron Determination of nickel content Gravimetric or titrimetric method |
IEC 60661:1999+AMD1:2003+AMD2:2005 CSV | Methods for measuring the performance of electric household coffee makers |
UNE-EN ISO 660:2010 | Animal and vegetable fats and oils - Determination of acid value and acidity (ISO 660:2009) |
ISO 9917-1:2007 | Dentistry Water-based cements Part 1: Powder/liquid acid-base cements |
ISO 105-E03:2010 | Textiles Tests for colour fastness Part E03: Colour fastness to chlorinated water (swimming-pool water) |
ISO 7886-3:2005 | Sterile hypodermic syringes for single use Part 3: Auto-disable syringes for fixed-dose immunization |
ISO 4946:2016 | Steel and cast iron Determination of copper 2,2'-Biquinoline spectrophotometric method |
ISO 4629-2:2016 | Binders for paints and varnishes — Determination of hydroxyl value — Part 2: Titrimetric method using a catalyst |
ISO 19250:2010 | Water quality Detection of Salmonella spp. |
ISO 9073-8:1995 | Textiles — Test methods for nonwovens — Part 8: Determination of liquid strike-through time (simulated urine) |
EN 60754-1:2014 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content |
ISO 13160:2012 | Water quality Strontium 90 and strontium 89 Test methods using liquid scintillation counting or proportional counting |
ISO 5402-2:2015 | Leather — Determination of flex resistance — Part 2: Vamp flex method |
BS EN 14945:2005 | Refractory products and materials. Spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use |
BS EN 14621:2005 | Textiles. Multifilament yarns. Methods of test for textured or non-textured filament yarns |
ISO/TS 15883-5:2005 | Washer-disinfectors Part 5: Test soils and methods for demonstrating cleaning efficacy |
ISO 8989:1995 | Plastics Liquid phenolic resins Determination of water miscibility |
ISO 17226-3:2011 | Leather — Chemical determination of formaldehyde content — Part 3: Determination of formaldehyde emissions from leather |
ISO 8536-4:2010 | Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed |
IEC 60601-2-24:2012 | Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
ISO 3262-20:2000 | Extenders for paints Specifications and methods of test Part 20: Fumed silica |
ISO 10714:1992 | Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method |
ISO 3549:1995 | Zinc dust pigments for paints — Specifications and test methods |
ISO 18609:2000 | Animal and vegetable fats and oils Determination of unsaponifiable matter Method using hexane extraction |
ISO 13017:2012 | Dentistry Magnetic attachments |
ISO 8871-2:2003 | Elastomeric parts for parenterals and for devices for pharmaceutical use Part 2: Identification and characterization |
ISO 11127-6:2011 | Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement |
BS EN ISO 10539:2002 | Animal and vegetable fats and oils. Determination of alkalinity |
ISO 9936:2016 | Animal and vegetable fats and oils Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography |
BS EN 12124:2012 | Chemicals used for treatment of water intended for human consumption. Sodium sulfite |
BS EN ISO 8290:1998 | Vitreous and porcelain enamels. Determination of resistance to sulfuric acid at room temperature |
ISO 3262-9:1997 | Extenders for paints — Specifications and methods of test — Part 9: Calcined clay |
ISO 14189:2013 | Water quality — Enumeration of Clostridium perfringens — Method using membrane filtration |
ISO 7887:2011 | Water quality — Examination and determination of colour |
BS EN ISO 4263-1:2004 | Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test Procedure for mineral oils |
ISO 4630:2015 | Clear liquids Estimation of colour by the Gardner colour scale |
BS EN ISO 11644:2009 | Leather. Test for adhesion of finish |
ISO 8537:2016 | Sterile single-use syringes, with or without needle, for insulin |
ISO 105-C10:2006 | Textiles Tests for colour fastness Part C10: Colour fastness to washing with soap or soap and soda |
ISO 2417:2016 | Leather — Physical and mechanical tests — Determination of the static absorption of water |
BS EN ISO 10545-15:1997 | Ceramic tiles Determination of lead and cadmium given off by glazed tiles |
ISO 12966-4:2015 | Animal and vegetable fats and oils Gas chromatography of fatty acid methyl esters Part 4: Determination by capillary gas chromatography |
EN ISO 7886-2:1997 | Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996) |
ISO 20795-2:2013 | Dentistry Base polymers Part 2: Orthodontic base polymers |
ISO 11127-7:2011 | Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Determination of water-soluble chlorides |
ISO 17380:2013 | Soil quality — Determination of total cyanide and easily liberatable cyanide — Continuous-flow analysis method |
ISO 17071:2006 | Leather — Physical and mechanical tests — Determination of fogging characteristics |
BS EN 13254:2016 | Geotextiles and geotextile-related products. Characteristics required for the use in the construction of reservoirs and dams |
UNE-EN ISO 7218:2008 | Microbiology of food and animal feeding stuffs - General requirements and guidance for microbiological examinations (ISO 7218:2007) |
UNE-EN 12174:2013 | Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate |
ISO 10520:1997 | Native starch — Determination of starch content — Ewers polarimetric method |
ISO 11376:1997 | Plastics Epoxy resins and glycidyl esters Determination of inorganic chlorine |
BS EN ISO 9227:2017 | Corrosion tests in artificial atmospheres. Salt spray tests |
BS EN ISO 13934-2:2014 | Textiles. Tensile properties of fabrics Determination of maximum force using the grab method |
BS EN ISO 8989:1998 | Plastics. Liquid phenolic resins. Determination of water miscibility |
ISO 8871-1:2003 | Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates |
ISO 5402:2002 | Leather Physical and mechanical tests Determination of flex resistance by flexometer method |
UNE-EN ISO 105-E09:2010 | Textiles - Tests for colour fastness - Part E09: Colour fastness to potting (ISO 105-E09:2010) |
ISO 11127-3:2011 | Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 3: Determination of apparent density |
ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
ISO 6885:2016 | Animal and vegetable fats and oils Determination of anisidine value |
ISO/TS 17764-1:2002 | Animal feeding stuffs — Determination of the content of fatty acids — Part 1: Preparation of methyl esters |
ISO 15680:2003 | Water quality — Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption |
BS EN 12173:2012 | Chemicals used for treatment of water intended for human consumption. Sodium fluoride |
BS EN 12138:1998 | Fruit and vegetable juices. Enzymatic determination of D-malic acid content. NAD spectrometric method |
ISO 20763:2004 | Petroleum and related products — Determination of anti-wear properties of hydraulic fluids — Vane pump method |
ISO 21530:2004 | Dentistry — Materials used for dental equipment surfaces — Determination of resistance to chemical disinfectants |
ISO 3830:1993 | Petroleum products Determination of lead content of gasoline Iodine monochloride method |
UNE-EN 12594:2015 | Bitumen and bituminous binders - Preparation of test samples |
UNE-EN ISO 16591:2011 | Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010) |
UNE-EN 12911:2013 | Products used for treatment of water intended for human consumption - Manganese greensand |
ISO 105-E12:2010 | Textiles Tests for colour fastness Part E12: Colour fastness to milling: Alkaline milling |
BS EN 14112:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of oxidation stability (accelerated oxidation test) |
ISO 17852:2006 | Water quality Determination of mercury Method using atomic fluorescence spectrometry |
ISO 12782-5:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 5: Extraction of humic substances from aqueous samples |
ISO 15320:2011 | Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract |
UNE-EN ISO 9308-1:2014 | Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora (ISO 9308-1:2014) |
UNE-EN 13075-2:2017 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
BS EN 12123:2012 | Chemicals used for treatment of water intended for human consumption. Ammonium sulfate |
BS EN 4158:2006 | Aerospace series. Paints and varnishes. Test method for measurement of electrical surface resistance of conductive layers |
BS EN ISO 17700:2005 | Footwear. Test methods for uppers, linings and insocks. Colour fastness to rubbing |
BS EN ISO 10319:2015 | Geosynthetics. Wide-width tensile test |
ONORM EN ISO 3071 : 2006 | TEXTILES - DETERMINATION OF PH OF AQUEOUS EXTRACT |
ISO 12782-4:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 4: Extraction of humic substances from solid samples |
BS EN ISO 13934-1:2013 | Textiles. Tensile properties of fabrics Determination of maximum force and elongation at maximum force using the strip method |
ISO 660:2009 | Animal and vegetable fats and oils Determination of acid value and acidity |
BS EN ISO 2495:2001 | Specification for iron blue pigments |
I.S. EN ISO 3262-1:1999 | EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - INTRODUCTION AND GENERAL TEST METHODS |
ISO 10523:2008 | Water quality — Determination of pH |
ISO 11731-2:2004 | Water quality Detection and enumeration of Legionella Part 2: Direct membrane filtration method for waters with low bacterial counts |
BS EN ISO 6744-4:2004 | Binders for paints and varnishes. Alkyd resins Determination of fatty acid content |
UNE-EN 12175:2013 | Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acid |
UNE-EN 13256:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures |
UNE-EN ISO 105-C06:2010 | Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010) |
UNE-EN 12823-1:2014 | Foodstuffs - Determination of vitamin A by high performance liquid chromatography - Part 1: Measurement of all-E-retinol and 13-Z-retinol |
BS EN ISO 3093:2009 | Wheat, rye and their flours, durum wheat and durum wheat semolina. Determination of the falling number according to Hagberg-Perten |
ISO 15234:1999 | Paints and varnishes — Testing of formaldehyde-emitting coatings and melamine foams — Determination of the steady-state concentration of formaldehyde in a small test chamber |
BS EN 14345:2004 | Characterization of waste. Determination of hydrocarbon content by gravimetry |
ISO 16264:2002 | Water quality — Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection |
BS EN 1243:1999 | Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates |
EN 12822:2014 | Foodstuffs - Determination of vitamin E by high performance liquid chromatography - Measurement of α-, β-, γ- and δ-tocopherol |
BS EN ISO 6744-3:2004 | Binders for paints and varnishes. Alkyd resins Determination of unsaponifiable matter content |
UNE-EN ISO 2871-2:2010 | Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010) |
BS EN ISO 9073-8:1998 | Textiles. Test methods for nonwovens Determination of liquid strike-through time (simulated urine) |
BS EN ISO 11127-7:2011 | Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives Determination of water-soluble chlorides |
DIN EN ISO 660:2009-10 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ACID VALUE AND ACIDITY |
BS EN 14133:2009 | Foodstuffs. Determination of ochratoxin A in wine and beer. HPLC method with immunoaffinity column clean-up |
BS EN 46-1:2009 | Wood preservatives. Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) Application by surface treatment (laboratory method) |
UNE-EN 13194:2015 | Chemicals used for treatment of water intended for human consumption - Acetic Acid |
ISO 4630-1:2004 | Clear liquids Estimation of colour by the Gardner colour scale Part 1: Visual method |
BS EN ISO 3823-1:1999 | Dental rotary instruments. Burs Steel and carbide burs |
DIN EN ISO 21530:2004-09 | Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004) |
BS EN ISO 10504:2015 | Starch derivatives. Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups. Method using high-performance liquid chromatography |
UNE-ISO 10362-2:2010 | Cigarettes. Determinación of water in smoke condensates. Part 2: Karl Fischer method. |
ISO 10504:2013 | Starch derivatives — Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups — Method using high-performance liquid chromatography |
ISO 5403:2002 | Leather Physical and mechanical tests Determination of water resistance of flexible leather |
UNE-EN 1405:2010 | Chemicals used for treatment of water intended for human consumption - Sodium alginate |
UNE-EN 13250:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways |
ISO 6744-2:1999 | Binders for paints and varnishes — Alkyd resins — Part 2: Determination of phthalic anhydride content |
BS EN 1245:1999 | Adhesives. Determination of pH. Test method |
BS EN ISO 8502-9:2001 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Field method for the conductometric determination of water-soluble salts |
BS EN 14483-1:2004 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by acids at room temperature |
DIN EN 14944-1:2006-07 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
UNE-EN 12123:2013 | Chemicals used for treatment of water intended for human consumption - Ammonium sulfate |
BS EN ISO 11641:2012 | Leather. Tests for colour fastness. Colour fastness to perspiration |
UNE-EN 14368:2015 | Products used for treatment of water intended for human consumption - Manganese dioxide coated limestone |
BS EN 14368:2015 | Products used for treatment of water intended for human consumption. Manganese dioxide coated limestone |
ISO 19343:2017 | Microbiology of the food chain — Detection and quantification of histamine in fish and fishery products — HPLC method |
ISO 9694:1996 | Dental phosphate-bonded casting investments |
ISO 105-E09:2010 | Textiles Tests for colour fastness Part E09: Colour fastness to potting |
ISO 17489:2013 | Leather Chemical tests Determination of tan content in synthetic tanning agents |
DIN EN 15510:2016-11 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
BS EN 889:2004 | Chemicals used for treatment of water intended for human consumption. Iron (II) sulfate |
BS EN ISO 9167-1 : 1995 | RAPESEED - DETERMINATION OF GLUCOSINOLATES CONTENT - PART 1: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
BS EN ISO 11609:2017 | Dentistry. Dentifrices. Requirements, test methods and marking |
ISO 6800:1997 | Animal and vegetable fats and oils — Determination of the composition of fatty acids in the 2-position of the triglyceride molecules |
UNE-EN 12124:2013 | Chemicals used for treatment of water intended for human consumption - Sodium sulfite |
DIN EN ISO 105-E02:2013-06 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER (ISO 105-E02:2013) |
ISO 3107:2011 | Dentistry — Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements |
BS EN 973:2009 | Chemicals used for treatment of water intended for human consumption. Sodium chloride for regeneration of ion exchangers |
BS EN 12847:2002 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of settling tendency of bitumen emulsions |
BS EN ISO 17070:2015 | Leather. Chemical tests. Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content |
BS EN ISO 11143:2008 | Dental equipment. Amalgam separators |
BS EN 14397-2:2004 | Fertilizers and liming materials. Determination of carbon dioxide Method for liming materials |
ISO 5403-1:2011 | Leather — Determination of water resistance of flexible leather — Part 1: Repeated linear compression (penetrometer) |
DIN EN 15553:2007-07 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
UNE-EN 12120:2013 | Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite |
BS EN ISO 12228:1999 | Animal and vegetable fats and oils. Determination of individual and total sterols contents. Gas chromatographic method |
BS EN 14130:2003 | Foodstuffs. Determination of vitamin C by HPLC |
BS EN ISO 10993-13:2010 | Biological evaluation of medical devices Identification and quantification of degradation products from polymeric medical devices |
ISO 15586:2003 | Water quality — Determination of trace elements using atomic absorption spectrometry with graphite furnace |
UNE-EN 49-2:2015 | Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2: Application by impregnation (Laboratory method) |
ISO 14719:2011 | Chemical analysis of refractory material glass and glazes — Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline |
ISO 11641:2012 | Leather — Tests for colour fastness — Colour fastness to perspiration |
ISO 17304:2013 | Dentistry — Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials |
BS EN 1205:2005 | Chemicals used for treatment of water intended for human consumption. Disodium dihydrogen pyrophosphate |
UNE-EN 13251:2017 | Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures |
UNE-EN 1197:2015 | Chemicals used for treatment of water intended for human consumption - Monozinc phosphate solution |
UNE-EN ISO 7864:2017 | Sterile hypodermic needles for single use - Requirements and test methods (ISO 7864:2016) |
BS EN ISO 15700:1999 | Leather. Tests for colour fastness. Colour fastness to water spotting |
ISO 11507:2007 | Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water |
BS EN ISO 8502-12:2004 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Field method for the titrimetric determination of water-soluble ferrous ions |
UNE-EN 117:2012 | Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
ISO/TS 17764-2:2002 | Animal feeding stuffs — Determination of the content of fatty acids — Part 2: Gas chromatographic method |
BS EN 12931:2015 | Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, anhydrous |
ISO 15914:2004 | Animal feeding stuffs — Enzymatic determination of total starch content |
UNE-EN ISO 11642:2013 | Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2012) |
BS EN ISO 15774:2017 | Animal and vegetable fats and oils. Determination of cadmium content by direct graphite furnace atomic absorption spectrometry |
BS EN 13191-2:2000 | Non-fatty food. Determination of bromide residues Determination of inorganic bromide |
BS EN 14456:2004 | Products used for treatment of water intended for human consumption. Bone charcoal |
BS EN ISO 8891:2000 | Dental casting alloys with noble metal content of at least 25% but less than 75% |
ISO 10693:1995 | Soil quality Determination of carbonate content Volumetric method |
ISO 19071:2016 | Leather Chemical tests Determination of chromium (VI) and the reductive potential for chromium tanning agents |
ISO 15061:2001 | Water quality — Determination of dissolved bromate — Method by liquid chromatography of ions |
BS EN 13515:2002 | Footwear. Test methods for uppers and lining. Water vapour permeability and absorption |
BS EN 13512:2002 | Footwear. Test methods for uppers and lining. Flex resistance |
UNE-EN ISO 11260:2011 | Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:1994+Cor 1:1996) |
UNE-EN 14176:2017 | Foodstuffs - Determination of domoic acid in raw shellfish, raw finfish and cooked mussels by RP-HPLC using UV detection |
BS EN 14362-1:2012 | Textiles. Methods for determination of certain aromatic amines derived from azo colorants Detection of the use of certain azo colorants accessible with and without extracting the fibres |
ISO 15181-5:2008 | Paints and varnishes Determination of release rate of biocides from antifouling paints Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract |
BS EN 13614:2004 | Methods of test for petroleum and its products. BS 2000-521: Bitumen and bituminous binders. Determination of adhesivity of bitumen emulsions by water immersion test. Aggregate method |
UNE-EN ISO 4619:2011 | Driers for paints and varnishes (ISO 4619:1998) |
UNE-EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
UNE-EN 973:2010 | Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers |
UNE-EN 12932:2015 | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate |
BS EN 13346:2000 | Characterization of sludges. Determination of trace elements and phosphorous. Aqua regia extraction methods |
08/30192115 DC : 0 | BS EN 4473 ED.P2 - AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS FOR FASTENERS - TECHNICAL SPECIFICATION |
ISO 648:2008 | Laboratory glassware — Single-volume pipettes |
ISO 7899-2:2000 | Water quality Detection and enumeration of intestinal enterococci Part 2: Membrane filtration method |
BS EN 725-1:2007 | Advanced technical ceramics. Methods of test for ceramic powders Determination of impurities in alumina |
BS EN 1204:2005 | Chemicals used for treatment of water intended for human consumption. Calcium tetrahydrogen bis(orthophosphate) |
BS EN ISO 11642:2012 | Leather. Tests for colour fastness. Colour fastness to water |
BS EN ISO 11732:2005 | Water quality. Determination of ammonium nitrogen. Method by flow analysis (CFA and FIA) and spectrometric detection |
UNE-EN ISO 3380:2016 | Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C (ISO 3380:2015) |
BS EN 12135:1998 | Fruit and vegetable juices. Determination of nitrogen content. Kjeldahl method |
ISO 25619-1:2008 | Geosynthetics Determination of compression behaviour Part 1: Compressive creep properties |
ISO 12205:1995 | Petroleum products — Determination of the oxidation stability of middle-distillate fuels |
BS EN ISO 2811-1:2016 | Paints and varnishes. Determination of density Pycnometer method |
UNE-EN ISO 2417:2016 | Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO 2417:2016) |
ISO 8192:2007 | Water quality Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation |
ISO 18857-1:2005 | Water quality — Determination of selected alkylphenols — Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection |
BS EN 14669:2005 | Surface active agents. Determination of anionic surface active agents and soaps in detergents and cleansers. Potentiometric two-phase titration method |
EN ISO 3262-1:1998 | Extenders for paints - Specifications and methods of test - Part 1:Introduction and general test methods (ISO 3262-1:1997) |
ISO 105-Z07:1995 | Textiles — Tests for colour fastness — Part Z07: Determination of application solubility and solution stability of water-soluble dyes |
UNE-EN ISO 2812-1:2018 | Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017) |
ISO 27108:2010 | Water quality Determination of selected plant treatment agents and biocide products Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) |
BS EN 47:2005 | Wood preservatives. Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus). (Laboratory method) |
BS EN ISO 11905-1:1998 | Water quality. Determination of nitrogen. Method using oxidative digestion with peroxodisulfate |
DIN EN 15195:2015-02 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
ISO 15181-6:2012 | Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract |
BS EN ISO 15181-1:2007 | Paints and varnishes. Determination of release rate of biocides from antifouling paints General method for extraction of biocides |
UNE-EN ISO 10993-13:2010 | Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:2010) |
ISO 10545-15:1995 | Ceramic tiles Part 15: Determination of lead and cadmium given off by glazed tiles |
ISO 3093:2009 | Wheat, rye and their flours, durum wheat and durum wheat semolina — Determination of the falling number according to Hagberg-Perten |
UNE-EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
DIN EN 14697:2005-08 | Textiles - Terry towels and terry towel fabrics - Specification and methods of test |
DIN ISO 5275:2005-10 | Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species - Doctor test (ISO 5275:2003) |
DIN EN ISO 14902:2002-02 | Animal feeding stuffs - Determination of trypsin inhibitor activity of soya products (ISO 14902:2001); English version of DIN EN ISO 14902 |
DIN EN 13523-27:2009-10 | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
I.S. EN ISO 10993-15:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 15: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM METALS AND ALLOYS (ISO 10993-15:2000) |
DIN EN ISO 20763:2004-10 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004) |
DIN EN ISO 105-E07:2010-08 | Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010) |
DIN EN 16502:2014-11 | TEST METHOD FOR THE DETERMINATION OF THE DEGREE OF SOIL ACIDITY ACCORDING TO BAUMANN-GULLY |
DIN ISO 10727:2004-05 | Tea and instant tea in solid form - Determination of caffeine content - Method using high-performance liquid chromatography (ISO 10727:2002) |
DIN EN 12823-1:2000-07 | FOODSTUFFS - DETERMINATION OF VITAMIN A BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - PART 1: MEASUREMENT OF ALL-E-RETINOL AND 13-Z-RETINOL |
EN ISO 11846:2008 | Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys (ISO 11846:1995) |
EN 891:2004 | Chemicals used for treatment of water intended for human consumption - Iron (III) chloride sulfate |
EN 939:2016 | Chemicals used for treatment of water intended for human consumption - Hydrochloric acid |
EN 14669:2005 | Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method |
EN ISO 12966-2:2017 | Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 2: Preparation of methyl esters of fatty acids (ISO 12966-2:2017) |
EN 899:2009 | Chemicals used for treatment of water intended for human consumption - Sulphuric acid |
EN 937:2016 | Chemicals used for treatment of water intended for human consumption - Chlorine |
EN 14350-1:2004 | Child use and care articles - Drinking equipment - Part 1: General and mechanical requirements and tests |
EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
EN ISO 1567 : 2000 | DENTISTRY - DENTURE BASE POLYMERS |
EN 15489:2007 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method |
EN ISO 10705-1:2001 | Water quality - Detection and enumeration of bacteriophages - Part 1: Enumeration of F-specific RNA bacteriophages (ISO 10705-1:1995) |
EN ISO 5814:2012 | Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012) |
EN ISO 17375:2006 | Animal feeding stuffs - Determination of aflatoxin B1 (ISO 17375:2006) |
EN ISO 3262-8:1999 | Extenders for paints - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:1999) |
EN 14898:2006+A1:2007 | Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing |
EN ISO 3830:1995 | Petroleum products - Determination of lead content of gasoline - Iodine monochloride method (ISO 3830:1993) |
EN 16086-2:2011 | Soil improvers and growing media - Determination of plant response - Part 2: Petri dish test using cress |
IP 488 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMINOUS EMULSIONS |
EN 14663:2005 | Foodstuffs - Determination of vitamin B6 (including its glycosylated forms) by HPLC |
EN ISO 17230:2011 | Leather - Physical and mechanical tests - Determination of water penetration pressure (ISO 17230:2006) |
EN 16277:2012 | Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide) |
EN ISO 15181-3:2007 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract (ISO 15181-3:2007) |
EN ISO 5398-2:2009 | Leather - Chemical determination of chromic oxide content - Part 2: Quantification by colorimetric determination (ISO 5398-2:2009) |
IP 461 : 2007 | BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
EN ISO 19250:2013 | Water quality - Detection of Salmonella spp. (ISO 19250:2010) |
EN 1911:2010 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
EN 16866:2017 | Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
EN ISO 6222:1999 | Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium (ISO 6222:1999) |
EN ISO 105-E09:2010 | Textiles - Tests for colour fastness - Part E09: Colour fastness to potting (ISO 105-E09:2010) |
EN 14362-2 : 2003 COR 2005 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 2: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE BY EXTRACTING THE FIBRES |
EN 15168:2006 | Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide |
EN ISO 3549:2002 | Zinc dust pigments for paints - Specifications and test methods (ISO 3549:1995) |
EN ISO 3262-2:1998 | Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262-2:1998) |
EN ISO 14402:1999 | Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO 14402:1999) |
EN ISO 15586:2003 | Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003) |
EN 16421:2014 | Influence of materials on water for human consumption - Enhancement of microbial growth (EMG) |
EN ISO 20795-1:2013 | Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013) |
EN ISO 3262-5:1998 | Extenders for paints - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO 3262-5:1998) |
EN ISO 17353:2005 | Water quality - Determination of selected organotin compounds - Gas chromatographic method (ISO 17353:2004) |
EN 16169:2012 | Sludge, treated biowaste and soil - Determination of Kjeldahl nitrogen |
EN 14664:2004 | Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate, solid |
UNI EN ISO 7711-1 : 2009 | DENTAL ROTARY INSTRUMENTS - DIAMOND INSTRUMENTS - PART 1: DIMENSIONS, REQUIREMENTS, MARKING AND PACKAGING |
EN ISO 18218-1:2015 | Leather - Determination of ethoxylated alkylphenols - Part 1: Direct method (ISO 18218-1:2015) |
EN 15607:2009 | Foodstuffs - Determination of d-biotin by HPLC |
EN 16811-1:2016 | Winter service equipment and products - De-icing agents - Part 1: Sodium chloride - Requirements and test methods |
EN ISO 14181:2000 | Animal feeding stuffs - Determination of residues of organochlorine pesticides - Gas chromatographic method (ISO 14181:2000) |
EN 898:2012 | Chemicals used for treatment of water intended for human consumption - Sodium hydrogen carbonate |
EN 14177:2003 | Foodstuffs - Determination of patulin in clear and cloudy apple juice and puree - HPLC method with liquid/liquid partition clean-up |
EN 14881:2005 | Surface active agents - Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines - Gas chromatographic method |
EN 938:2016 | Chemicals used for treatment of water intended for human consumption - Sodium chlorite |
EN ISO 14362-1:2017 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres (ISO 14362-1:2017) |
EN ISO 14902:2001 | Animal feeding stuffs - Determination of trypsin inhibitor activity of soya products (ISO 14902:2001) |
EN 14652:2005+A1:2007 | Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing |
EN 14524:2004 | Foodstuffs - Determination of okadaic acid in mussels - HPLC method with solid phase extraction clean-up, derivatization and fluorimetric detection |
EN ISO 22478:2006 | Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006) |
EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
EN 14945:2005 | Refractory products and materials - Spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use |
EN ISO 28723:2011 | Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers (ISO 28723:2008) |
EN ISO 18465:2017 | Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC-MS/MS (ISO 18465:2017) |
EN ISO 4630:2015 | Clear liquids - Estimation of colour by the Gardner colour scale (ISO 4630:2015) |
IP 319 : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
ONORM EN 16166 : 2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
EN ISO 11376 : 2001 | PLASTICS - EPOXY RESINS AND GLYCIDYL ESTERS - DETERMINATION OF INORGANIC CHLORINE |
EN 370:1993 | Wood preservatives - Determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer) |
EN ISO 10700:1995 | Steel and iron - Determination of manganese content - Flame atomic spectrometric method (ISO 10700:1994) |
EN ISO 1135-3:2017 | Transfusion equipment for medical use - Part 3: Blood-taking sets for single use (ISO 1135-3:2016) |
EN 14123:2007 | Foodstuffs - Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder - High performance liquid chromatographic method with post-column derivatisation and immunoaffinity column cleanup |
EN 15488:2007 | Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method |
EN 15074:2014 | Chemicals used for treatment of swimming pool water - Ozone |
ONORM EN 13138-1 : 2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
EN ISO 14362-3:2017 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene (ISO 14362-3:2017) |
EN ISO 11127-7:2011 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides (ISO 11127-7:2011) |
EN ISO 7899-2:2000 | Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method (ISO 7899-2:2000) |
EN ISO 6873:2013 | Dentistry - Gypsum products (ISO 6873:2013) |
EN 14289:2003 | Leather - Physical and mechanical tests - Determination of water penetration pressure |
EN ISO 18857-2:2011 | Water quality - Determination of selected alkylphenols - Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation (ISO 18857-2:2009) |
EN ISO 29022:2013 | Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013) |
EN ISO 3262-6:1998 | Extenders for paints - Specifications and methods of test - Part 6: Precipitated calcium carbonate (ISO 3262-6:1998) |
EN ISO 3262-17:2000 | Extenders for paints - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2000) |
EN ISO 5403-2:2011 | Leather - Determination of water resistance of flexible leather - Part 2: Repeated angular compression (Maeser) (ISO 5403-2:2011) |
EN 1890:2006 | Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide |
EN ISO 18412:2006 | Water quality - Determination of chromium(VI) - Photometric method for weakly contaminated water (ISO 18412:2005) |
EN ISO 19071:2016 | Leather - Chemical tests - Determination of chromium (VI) and the reductive potential for chromium tanning agents (ISO 19071:2016) |
EN ISO 3107:2011 | Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements (ISO 3107:2011) |
EN ISO 3262-14:2000 | Extenders for paints - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2000) |
EN 1400-2:2002 | Child use and care articles - Soothers for babies and young children - Part 2 : Mechanical requirements and tests |
EN 15490:2007 | Ethanol as a blending component for petrol - Determination of pHe |
EN 725-1:2007 | Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina |
EN ISO 10539:2002 | Animal and vegetable fats and oils - Determination of alkalinity (ISO 10539:2002) |
EN ISO 22674:2016 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
EN 14888:2005 | Fertilizers and liming materials - Determination of cadmium content |
EN 15626:2016 | Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method |
EN ISO 10309:2016 | Metallic coatings - Porosity tests - Ferroxyl test (ISO 10309:1994) |
EN 4171:2011 | Aerospace series - Paints and varnishes - Test method for determination of phosphoric acid index |
EN ISO 17229:2016 | Leather - Physical and mechanical tests - Determination of water vapour absorption (ISO 17229:2016) |
EN ISO 15711:2004 | Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
EN ISO 6876:2012 | Dentistry - Root canal sealing materials (ISO 6876:2012) |
EN 14133:2009 | Foodstuffs - Determination of ochratoxin A in wine and beer - HPLC method with immunoaffinity column clean-up |
EN ISO 8192:2007 | Water quality - Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation (ISO 8192:2007) |
EN 15115:2006 | Textile floor coverings - Determination of sensitivity to spilled water |
EN 15890:2010 | Foodstuffs - Determination of patulin in fruit juice and fruit based purée for infants and young children - HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection |
EN ISO 105-Z07:1997 | Textiles - Tests for colour fastness - Part Z07: Determination of application solubility and solution stability of water-soluble dyes (ISO 105-Z07:1995) |
EN ISO 13078-2:2016 | Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze (ISO 13078-2:2016) |
EN ISO 3262-18:2000 | Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000) |
EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
EN 15829:2010 | Foodstuffs - Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit and dried figs - HPLC method with immunoaffinity column cleanup and fluorescence detection |
EN 16711-2:2015 | Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution |
EN ISO 11245 : 2000 | DENTAL RESTORATIONS - PHOSPHATE-BONDED REFRACTORY DIE MATERIALS |
EN ISO 15061:2001 | Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001) |
EN 14035-35:2004 | Fireworks - Part 35: Throwdowns - Specification and test methods |
EN ISO 3262-9:1998 | Extenders for paints - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:1997) |
EN ISO 6251:1998 | Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996) |
EN ISO 6744-2:2004 | Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999) |
EN 14362-3:2012 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene |
EN 14456:2004 | Products used for treatment of water intended for human consumption - Bone charcoal |
EN ISO 14719:2011 | Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011) |
EN ISO 10504:2015 | Starch derivatives - Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups - Method using high-performance liquid chromatography (ISO 10504:2013) |
EN 15905:2010 | Fertilizers - Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC) |
EN 14805:2008 | Chemicals used for treatment of water intended for human consumption - Sodium chloride for on site electrochlorination using non-membrane technology |
EN ISO 21606:2007 | Dentistry - Elastomeric auxiliaries for use in orthodontics (ISO 21606:2007) |
EN 15039:2014 | Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polycarboxilic acids and salts |
EN 901:2013 | Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite |
EN ISO 23913:2009 | Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006) |
EN 14671:2006 | Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride |
EN 16847:2016 | Fertilizers - Determination of complexing agents in fertilizers - Identification of heptagluconic acid by chromatography |
EN 1407:2008 | Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides |
EN ISO 12205:1996 | Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995) |
EN ISO 15181-2:2007 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate (ISO 15181-2:2007) |
EN 15109:2006 | Surface active agents - Determination of the active matter content of alkylamidopropylbetaines |
EN ISO 6271-1:2004 | Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1: Visual method (ISO 6271-1:2004) |
EN ISO 20763:2004 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004) |
EN ISO 17943:2016 | Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 17943:2016) |
EN ISO 17226-3:2011 | Leather - Chemical determination of formaldehyde content - Part 3: Determination of formaldehyde emissions from leather (ISO 17226-3:2011) |
EN ISO 16954:2015 | Dentistry - Test methods for dental unit waterline biofilm treatment (ISO 16954:2015) |
EN ISO 6800:1997 | Animal and vegetable fats and oils - Determination of the composition of fatty acids in the 2-position of the triglycerides molecules (ISO 6800:1997) |
EN ISO 15193:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009) |
EN ISO 8623:2015 | Tall-oil fatty acids for paints and varnishes - Test methods and characteristic values (ISO 8623:2015) |
EN 14832:2005 | Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
EN 14697:2005 | Textiles - Terry towels and terry towel fabrics - Specification and methods of test |
EN ISO 17071:2011 | Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006) |
EN 4195:2011 | Aerospace series - Paints and varnishes - Test method for determination of chromate leaching |
EN ISO 10993-15:2009 | Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000) |
EN ISO 3630-1:2008 | Dentistry - Root-canal instruments - Part 1: General requirements and test methods (ISO 3630-1:2008) |
EN ISO 15234:2010 | Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999) |
EN ISO 2871-2:2010 | Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010) |
EN ISO 15681-1:2004 | Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 1: Method by flow injection analysis (FIA) (ISO 15681-1:2003) |
EN ISO 3262-4:1998 | Extenders for paints - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:1998) |
EN ISO 11543:2002 | Modified starch - Determination of hydroxypropyl content - Method using proton Nuclear Magnetic Resonance (NMR) spectrometry (ISO 11543:2000) |
EN ISO 5403-1:2011 | Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer) (ISO 5403-1:2011) |
EN 973:2009 | Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers |
EN ISO 22032:2009 | Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry (ISO 22032:2006) |
EN ISO 22254:2005 | Dentistry - Manual toothbrushes - Resistance of tufted portion to deflection (ISO 22254:2005) |
EN ISO 8795:2001 | Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001) |
EN ISO 19074:2015 | Leather - Physical and mechanical tests - Determination of water absorption by capillary action (wicking) (ISO 19074:2015) |
EN ISO 11213:1995 | Modified starch - Determination of acetyl content - Enzymatic method (ISO 11213:1995) |
EN ISO 4920:2012 | Textile fabrics - Determination of resistance to surface wetting (spray test) (ISO 4920:2012) |
EN ISO 11997-2:2013 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
EN ISO 105-Z09:1997 | Textiles - Tests for colour fastness - Part Z09: Determination of cold water solubility of water-soluble dyes (ISO 105-Z09:1995) |
EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
EN 15845:2010 | Paper and board - Determination of the cytotoxicity of aqueous extracts |
EN 15487:2007 | Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method |
EN 16400:2013 | Chemicals used for treatment of swimming pool water - Hydrogen peroxide |
EN 12868:2017 | Child use and care articles - Method for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers |
EN 13652:2001 | Soil improvers and growing media - Extraction of water soluble nutrients and elements |
EN ISO 13395:1996 | Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
EN 16024:2011 | Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
EN 71-12:2016 | Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substances |
EN 16086-1:2011 | Soil improvers and growing media - Determination of plant response - Part 1: Pot growth test with Chinese cabbage |
EN ISO 21627-3:2009 | Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009) |
EN ISO 12228:1999 | Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method (ISO 12228:1999) |
EN ISO 648:2008 | Laboratory glassware - Single-volume pipettes (ISO 648:2008) |
EN ISO 13402:2000 | Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995) |
EN ISO 15700:1999 | Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998) |
EN 16006:2011 | Animal feeding stuffs - Determination of the Sum of Fumonisin B1 & B2 in compound animal feed with immunoaffinity clean-up and RP-HPLC with fluorescence detection after pre- or post-column derivatisation |
EN 16168:2012 | Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method |
EN ISO 11909:2007 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
EN ISO 483:2005 | Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005) |
EN ISO 7218 : 2007 COR 2014 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS (ISO 7218:2007/AMD 1:2013, CORRECTED VERSION 2014-04-15) |
EN ISO 7785-1:1999 | Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997) |
EN 15909:2010 | Fertilizers - Determination of calcium and formate in calcium foliar fertilizers |
EN 15062:2006 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
EN ISO 11642:2012 | Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2012) |
EN ISO 8502-8:2004 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric dedetermination of moisture (ISO 8502-8:2001) |
EN ISO 17380:2013 | Soil quality - Determination of total cyanide and easily liberatable cyanide - Continuous-flow analysis method (ISO 17380:2013) |
EN 26461-1:1993 | Water quality - Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) - Part 1: Method by enrichment in a liquid medium (ISO 6461-1:1986) |
EN ISO 18218-2:2015 | Leather - Determination of ethoxylated alkylphenols - Part 2: Indirect method (ISO 18218-2:2015) |
EN ISO 11644:2009 | Leather - Test for adhesion of finish (ISO 11644:2009) |
EN ISO 15181-5:2008 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract (ISO 15181-5:2008) |
EN 1388-1:1995 | Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware |
EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
EN ISO 15710:2006 | Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002) |
EN ISO 10139-2:2016 | Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2016) |
EN 15721:2013 | Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method |
EN 46-1:2016 | Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method) |
EN ISO 15181-4:2008 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate (ISO 15181-4:2008) |
EN ISO 14184-2:2011 | Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:2011) |
EN 4170:2007 | Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle |
EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
EN ISO 15587-2:2002 | Water quality - Digestion for the determination of selected elements in water - Part 2: Nitric acid digestion (ISO 15587-2:2002) |
EN ISO 19020:2017 | Microbiology of the food chain - Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs (ISO 19020:2017) |
EN 13955:2002 | Surface active agents - Determination of Krafft point and solubility of ionic surface active agents |
EN 16155:2012 | Foodstuffs - Determination of sucralose - High performance liquid chromatographic method |
EN ISO 105-G01:2016 | Textiles - Tests for colour fastness - Part G01: Colour fastness to nitrogen oxides (ISO 105-G01:2016) |
EN ISO 13934-2:2014 | Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014) |
EN 16711-1:2015 | Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion |
EN ISO 105-Z08:1997 | Textiles - Tests for colour fastness - Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes (ISO 105-Z08:1995) |
EN 16568:2014 | Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
EN 15962:2011 | Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients |
EN ISO 4629:1998 | Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996) |
EN 14122:2014 | Foodstuffs - Determination of vitamin B1 by high performance liquid chromatography |
EN 14288:2003 | Leather - Physical and mechanical tests - Determination of fogging characteristics |
EN 16173:2012 | Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements |
EN ISO 14182:1999 | Animal feeding stuffs - Determination of residues of organophosphorus pesticides - Gas chromatographic method (ISO 14182:1999) |
EN ISO/TS 17234 : 2003 | LEATHER - CHEMICAL TESTS - DETERMINATION OF CERTAIN AZO COLOURANTS IN DYED LEATHERS |
EN ISO 5764:2009 | Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009) |
EN ISO 21627-1:2009 | Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009) |
EN 48:2005 | Wood preservatives - Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method) |
EN 152:2011 | Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method |
EN 15086:2006 | Foodstuffs - Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs |
EN 14130 : 2003 | FOODSTUFFS - DETERMINATION OF VITAMIN C BY HPLC |
EN ISO 12782-5:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 5: Extraction of humic substances from aqueous samples (ISO 12782-5:2012) |
EN ISO 9963-2:1995 | Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity (ISO 9963-2:1994) |
EN 20-1:1992 | Wood preservatives - Determination of the protective effectiveness against Lyctus Brunneus (Stephens) - Part 1: Application by surface treatment (laboratory method) |
EN 15947-4:2015 | Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
EN 16007:2011 | Animal feeding stuffs - Determination of Ochratoxin A in animal feed by immunoaffinity column clean-up and High Performance Liquid Chromatography with fluorescence detection |
EN 13996:2002 | Surface active agents - Foaming power and antifoaming power - Turbine stirring method |
EN ISO 6869:2000 | Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry (ISO 6869:2000) |
EN 15484:2007 | Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method |
EN 15704:2008 | Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water |
EN ISO 10714:2002 | Steel and iron - Determination of phophorus content - Phosphovanadomolybdate spectrophotometric method (ISO 10714:1992) |
EN ISO 12311 : 2013 COR 2014 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15) |
EN 1388-2:1995 | Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware |
EN 14582:2016 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
EN 20-2:1993 | Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 2: Application by impregnation (Laboratory method) |
EN 15195:2014 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
EN 29917 : 1994 | DENTAL WATER BASED CEMENTS |
EN 14152:2014 | Foodstuffs - Determination of vitamin B2 by high performance liquid chromatography |
EN 14672:2005 | Characterization of sludges - Determination of total phosphorus |
EN 13784:2001 | Foodstuffs - DNA Comet Assay for the detection of irradiated foodstuffs - Screening method |
EN 17050:2017 | Animal feeding stuffs: Methods of sampling and analysis - Determination of iodine in animal feed by ICP-MS |
EN ISO 17075-1:2017 | Leather - Chemical determination of chromium(VI) content in leather - Part 1: Colorimetric method (ISO 17075-1:2017) |
EN ISO 7864:2016 | Sterile hypodermic needles for single use - Requirements and test methods (ISO 7864:2016) |
EN 16075:2011 | Fertilizers - Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
EN ISO 12782-4:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO 12782-4:2012) |
EN ISO 16591:2010 | Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010) |
EN ISO 21078-1:2008 | Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008) |
EN 15649-1:2009+A2:2013 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
EN ISO 12782-3:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid (ISO 12782-3:2012) |
EN ISO 5529:2010 | Wheat - Determination of the sedimentation index - Zeleny test (ISO 5529:2007) |
EN 14362-1:2012 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres |
EN 27785-1 : 1994 | DENTAL HANDPIECES - PART 1: HIGH SPEED AIR TURBINE HANDPIECES |
EN ISO 9562:2004 | Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004) |
EN 16811-2:2016 | Winter service equipment and products - De-icing agents - Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods |
EN ISO 11085:2015 | Cereals, cereals-based products and animal feeding stuffs - Determination of crude fat and total fat content by the Randall extraction method (ISO 11085:2015) |
EN 1811:2011+A1:2015 | Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin |
EN ISO 15682:2001 | Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection (ISO 15682:2000) |
EN 16418:2014 | Paper and board - Determination of the cytotoxicity of aqueous extracts using a metabolically competent hepatoma cell line (HepG2) |
EN ISO 10270:2008 | Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995, including Cor 1:1997) |
EN 14350-2:2004 | Child use and care articles - Drinking equipment - Part 2: Chemical requirements and tests |
EN ISO 12687:1998 | Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test (ISO 12687:1996) |
EN 15040:2014 | Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Phosphonic acids and salts |
EN ISO 11998:2006 | Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006) |
EN 14185-1:2003 | Non-fatty food - Determination of N-methylcarbamate residues - Part 1: HPLC-method with SPE clean-up |
EN ISO 4938:2016 | Steel and iron - Determination of nickel content - Gravimetric or titrimetric method (ISO 4938:2016) |
EN 15482:2012 | Chemicals used for treatment of water intended for human consumption - Sodium permanganate |
EN ISO 12782-2:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite (ISO 12782-2:2012) |
EN 1785:2003 | Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones |
EN 15647:2009 | Surface active agents - Determination of the dispersing effect of surfactants on powder |
EN ISO 11127-6:2011 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011) |
EN ISO 8502-11:2006 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006) |
EN 14670:2005 | Surface active agents - Sodium dodecyl sulfate - Analytical method |
EN ISO 10993-14:2009 | Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001) |
EN ISO 2811-4:2011 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
EN 14132:2009 | Foodstuffs - Determination of ochratoxin A in barley and roasted coffee - HPLC method with immunoaffinity column clean-up |
EN 1405:2009 | Chemicals used for treatment of water intended for human consumption - Sodium alginate |
EN 1410:2008 | Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides |
EN 16852:2017 | Foodstuffs - Determination of ethyl carbamate in stone fruit spirits, fruit marc spirits and other spirit drinks - GC-MS method |
EN 974:2003 | Chemicals used for treatment of water intended for human consumption - Phosphoric acid |
EN ISO 6271:2015 | Clear liquids - Estimation of colour by the platinum-cobalt colour scale (ISO 6271:2015) |
EN ISO 28706-4:2016 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016) |
EN 26461-2:1993 | Water quality - Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) - Part 2: Method by membrane filtration (ISO 6461-2:1986) |
EN 16923:2017 | Foodstuffs - Determination of T-2 toxin and HT-2 toxin in cereals and cereal products for infants and young children by LC-MS/MS after SPE cleanup |
EN 49-1:2016 | Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 1: Application by surface treatment (Laboratory method) |
EN 71-5:2015 | Safety of toys - Part 5: Chemical toys (sets) other than experimental sets |
EN 13253:2016 | Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) |
EN ISO 6744-3:2004 | Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999) |
EN ISO 11641:2012 | Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012) |
EN ISO 13938-1:1999 | Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999) |
EN 16109:2011 | Fertilizers - Determination of complexed micro-nutrient ions in fertilizers - Identification of lignosulfonates |
EN 16802:2016 | Foodstuffs - Determination of elements and their chemical species - Determination of inorganic arsenic in foodstuffs of marine and plant origin by anion-exchange HPLC-ICP-MS |
EN 16206:2012 | Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) |
EN 16357:2013 | Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid |
EN 16502:2014 | Test method for the determination of the degree of soil acidity according to Baumann-Gully |
EN ISO 182-2:1999 | Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990) |
EN ISO 14896:2009 | Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009) |
EN ISO 7887:2011 | Water quality - Examination and determination of colour (ISO 7887:2011) |
EN 13650:2001 | Soil improvers and growing media - Extraction of aqua regia soluble elements |
EN ISO 16408:2015 | Dentistry - Oral care products - Oral rinses (ISO 16408:2015) |
EN ISO 9073-16:2008 | Textiles - Test methods for nonwovens - Part 16: Determination of resistance to penetration by water (hydrostatic pressure) (ISO 9073-16:2007) |
EN 14352:2004 | Foodstuffs - Determination of fumonisin B1 and B2 in maize based foods - HPLC method with immunoaffinity column clean up |
EN 15652:2009 | Foodstuffs - Determination of niacin by HPLC |
EN ISO 3823-1:1998 | Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823-1:1997) |
EN 1568-2:2018 | Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids |
EN ISO 105-B07:2009 | Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial perspiration (ISO 105-B07:2009) |
EN ISO 20783-1:2011 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011) |
EN 16620:2015 | Food analysis - Determination of furan in coffee and coffee products by headspace gas chromatography and mass spectrometry (HS GC-MS) |
EN ISO 16373-2:2014 | Textiles - Dyestuffs - Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water) (ISO 16373-2:2014) |
ENV 1122 : 1995 | DETERMINATION OF CADMIUM IN PLASTICS WITH THE METHOD OF THE WET DECOMPOSITION |
EN ISO 17895:2005 | Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
EN ISO 8294:1999 | Animal and vegatable fats and oils - Determination of copper, iron and nickel contents - Graphite furnace atomic absorption method (ISO 8294:1994) |
EN 2434-003:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 003: Flexible and high fluid resistance for interior |
EN ISO 15914:2005 | Animal feeding stuffs - Enzymatic determination of total starch content (ISO 15914:2004) |
EN ISO 18857-1:2006 | Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005) |
EN 2436-001:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 001: Basic requirements |
EN ISO/TS 17226 : 2003 | LEATHER - CHEMICAL TESTS - DETERMINATION OF FORMALDEHYDE CONTENT |
EN 4406:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane coating - Abrasion resistant |
EN ISO 105-C06:2010 | Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010) |
EN 49-2:2015 | Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2: Application by impregnation (Laboratory method) |
EN ISO 4630-1:2004 | Clear liquids - Estimation of colour by the Gardner colour scale - Part 1: Visual method (ISO 4630-1:2004) |
EN ISO 16373-1:2015 | Textiles - Dyestuffs - Part 1: General principles of testing coloured textiles for dyestuff identification (ISO 16373-1:2015) |
EN ISO 835:2007 | Laboratory glassware - Graduated pipettes (ISO 835:2007) |
EN 14820:2004 | Single-use containers for human venous blood specimen collection |
EN 15851:2010 | Foodstuffs - Determination of aflatoxin B1 in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection |
EN ISO 15912:2016 | Dentistry - Refractory investment and die material (ISO 15912:2016) |
EN ISO 4934:2003 | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
EN 14944-3:2007 | Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products |
EN 14712:2005 | Surface active agents - Determination of physical stability in alkaline and acid solutions |
EN ISO 8502-5:2004 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998) |
EN ISO 6865:2000 | Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration (ISO 6865:2000) |
EN 16694:2015 | Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS) |
EN 4158:2006 | Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers |
EN ISO 16265:2012 | Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA) (ISO 16265:2009) |
EN 15781:2009 | Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation |
EN 16619:2015 | Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by gas chromatography mass spectrometry (GC-MS) |
EN 13651:2001 | Soil improvers and growing media - Extraction of calcium chloride/DTPA (CAT) soluble nutrients |
EN 1788:2001 | Foodstuffs - Thermoluminescence detection of irradiated food from which silicate minerals can be isolated |
EN 14039:2004 | Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography |
EN 1483:2007 | Water quality - Determination of mercury - Method using atomic absorption spectrometry |
EN ISO 3262-3:1998 | Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:1998) |
EN ISO 2417:2016 | Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO 2417:2016) |
EN ISO 8290:1998/AC:1999 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO SULFURIC ACID AT ROOM TEMPERATURE |
EN 14111:2003 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value |
EN 15791:2009 | Animal feeding stuffs - Determination of Deoxynivalenol in animal feed - HPLC method with UV detection and immunoaffinity column clean-up |
EN ISO 14403-1:2012 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) (ISO 14403-1:2012) |
EN ISO 4263-1:2004 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1: Procedure for mineral oils (ISO 4263-1:2003) |
EN ISO 7491:2000 | Dental materials - Determination of colour stability (ISO 7491:2000) |
EN ISO 15181-1:2007 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007) |
EN 16877:2016 | Animal feeding stuffs: Methods of sampling and analysis - Determination of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials and compound feed by LC-MS |
EN 896:2012 | Chemicals used for treatment of water intended for human consumption - Sodium hydroxide |
EN ISO 12966-4:2015 | Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 4: Determination by capillary gas chromatography (ISO 12966-4:2015) |
EN 16278:2012 | Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE) |
EN ISO 4263-4:2006 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006) |
EN ISO 15774:2017 | Animal and vegetable fats and oils - Determination of cadmium content by direct graphite furnace atomic absorption spectrometry (ISO 15774:2017) |
EN ISO 3262-21:2000 | Extenders for paints - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262:2000) |
EN 15850:2010 | Foodstuffs - Determination of zearalenone in maize based baby food, barley flour, maize flour, polenta, wheat flour and cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection |
EN 13585:2001 | Foodstuffs - Determination of fumonisins B1 and B2 in maize - HPLC method with solid phase extraction clean-up |
EN ISO 3262-22:2001 | Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2001) |
EN ISO 16784-2:2008 | Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO 16784-2:2006) |
EN ISO 8537:2016 | Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2016) |
EN ISO 9917-2:2017 | Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2017) |
EN ISO 4829-2:2016 | Steels - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 2: Silicon contents between 0,01 % and 0,05 % (ISO 4829-2:2016) |
EN 2436-003:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance |
EN ISO 11143:2008 | Dentistry - Amalgam separators (ISO 11143:2008) |
EN ISO 3231:1997 | Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
EN ISO 8891 : 2000 | DENTAL CASTING ALLOYS WITH NOBLE METAL CONTENT OF AT LEAST 25% BUT LESS THAN 75% |
EN ISO 8799:2009 | Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter (ISO 8799:2009) |
EN ISO 16960:2014 | Natural gas - Determination of sulfur compounds - Determination of total sulfur by oxidative microcoulometry method (ISO 16960:2014) |
EN ISO 15587-1:2002 | Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion (ISO 15587-1:2002) |
EN ISO 14403-2:2012 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012) |
EN ISO 7785-2:1997 | Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995) |
EN ISO 13294:1997 | Dental handpieces - Dental air-motors (ISO 13294:1997) |
EN ISO 7783-1:1999 | Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998) |
EN ISO 20843:2011 | Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011) |
EN ISO 10520:1998 | Native starch - Determination of starch content - Ewers polarimetric method (ISO 10520:1997) |
EN ISO 14403:2002 | Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002) |
EN 16993:2018 | Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
EN ISO 21530:2004 | Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004) |
EN ISO 15703:1999 | Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998) |
EN 14166:2009 | Foodstuffs - Determination of vitamin B6 by microbiological assay |
EN ISO 28706-5:2011 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems (ISO 28706-5:2010) |
EN 15510:2017 | Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum and lead by ICP-AES |
EN ISO 105-E16:2007 | Textiles - Tests for colour fastness - Part E16: Colour fastness to water spotting on upholstery fabrics (ISO 105-E16:2006) |
EN ISO 6871-1 : 1996 | DENTAL BASE METAL CASTING ALLOYS - COBALT-BASED ALLOYS |
EN ISO 11214:1996 | Modified starch - Determination of carboxyl group content of oxidized starch (ISO 11214:1996) |
EN 14483-5:2004 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems |
EN ISO 2870:2009 | Surface active agents - Detergents - Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions (ISO 2870:2009) |
EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
EN ISO 6744-4:2004 | Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999) |
EN ISO 3262-15:2000 | Extenders for paints - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2000) |
EN ISO 15141-1:1998 | Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 1: High performance liquid chromatographic method with silica gel clean up (ISO 15141-1:1998) |
EN ISO 11244 : 1999 | DENTAL BRAZING INVESTMENTS |
EN ISO 105-Z03:1998 | Textiles - Tests for colour fastness - Part Z03: Intercompatibility of basic dyes for acrylic fibres (ISO 105-Z03:1996) |
EN 15769:2009 | Ethanol as a blending component of petrol - Determination of appearance - Visual method |
EN ISO 105-E07:2010 | Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010) |
EN 889:2004 | Chemicals used for treatment of water intended for human consumption - Iron (II) sulfate |
EN ISO 11609:2017 | Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017) |
EN ISO 6885:2016 | Animal and vegetable fats and oils - Determination of anisidine value (ISO 6885:2016) |
EN ISO 9936:2016 | Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography (ISO 9936:2016) |
EN ISO 6246:2017 | Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017) |
EN ISO 10705-2:2001 | Water quality - Detection and enumeration of bacteriophages - Part 2: Enumeration of somatic coliphages (ISO 10705-2:2000) |
EN ISO 10720:2007 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997) |
ENV 13800:2000 | Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix |
EN 2434-001:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 001: Basic requirements |
EN 2435-003:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance |
EN 900:2014 | Chemicals used for treatment of water intended for human consumption - Calcium hypochlorite |
EN 14077:2003 | Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method |
EN 14345:2004 | Characterization of waste - Determination of hydrocarbon content by gravimetry |
EN 15030:2012+A1:2015 | Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use |
EN 15837:2009 | Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
EN ISO 7253 : 2001 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
EN ISO 2811-3:2011 | Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
EN ISO 11216:1998 | Modified starch - Determination of content of carboxymethyl groups in carboxymethyl starch (ISO 11216:1998) |
EN ISO 11215:1998 | Modified starch - Determination of adipic acid content of acetylated di-starch adipates - Gas-chromatographic method (IS0 11215:1998) |
EN ISO 17075-2:2017 | Leather - Chemical determination of chromium(VI) content in leather - Part 2: Chromatographic method (ISO 17075-2:2017) |
EN ISO 9831:2003 | Animal feeding stuffs, animal products, and faeces or urine - Determination of gross calorific value - Bomb calorimeter method (ISO 9831:1998) |
EN 4503:2013 | Aerospace series - Non-metallic materials - Textiles - Test method - Determination of water soluble chloride and sulfate of aqueous extracts |
EN ISO 28706-2:2017 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017) |
EN ISO 15702:1999 | Leather - Tests for colour fastness - Colour fastness to machine washing (ISO 15702:1998) |
EN ISO 12937:2000 | Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
EN 15550:2017 | Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion |
EN 273 : 1992 | WOOD PRESERVATIVES - DETERMINATION OF THE CURATIVE ACTION AGAINST LYCTUS BRUNNEUS (STEPHENS) (LABORATORY METHOD) |
EN ISO 13757:1996 | Liquefied petroleum gases - Determination of oily residues - High-temperature method (ISO 13757:1996) |
EN ISO 4404-1:2012 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012) |
EN ISO 15788-2:2004 | Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 2: Method using high-performance liquid chromatography (HPLC) (ISO 15788-2:2003) |
IP 485 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS |
EN 2436-004:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance |
EN 1784:2003 | Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic analysis of hydrocarbons |
EN ISO 11702:2016 | Animal and vegetable fats and oils - Enzymatic determination of total sterols content (ISO 11702:2016) |
ONORM EN ISO 4787 : 2011 | LABORATORY GLASSWARE - VOLUMETRIC INSTRUMENTS - METHODS FOR TESTING OF CAPACITY AND FOR USE |
EN ISO 9917-1:2007 | Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements (ISO 9917-1:2007) |
EN 852-1 : 1996 | PLASTICS PIPING SYSTEMS FOR THE TRANSPORT OF WATER INTENDED FOR HUMAN CONSUMPTION - MIGRATION ASSESSMENT - DETERMINATION OF MIGRATION VALUES OF PLASTICS PIPES |
EN 13654-1:2001 | Soil improvers and growing media - Determination of nitrogen - Part 1: Modified Kjeldahl method |
EN 16651:2015 | Fertilizers - Determination of N-(n-Butyl)thiophosphoric acid triamide (NBPT) and N-(n-Propyl)thiophosphoric acid triamide (NPPT) - Method using high-performance liquid chromatography (HPLC) |
EN 890:2012 | Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate solution |
EN 71-11:2005 | Safety of toys - Part 11: Organic chemical compounds - Methods of analysis |
EN ISO 8502-12:2004 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions (ISO 8502-12:2003) |
EN 15792:2009 | Animal feeding stuffs - Determination of zearalenone in animal feed - High performance liquid chromatographic method with fluorescence detection and immunoaffinity column clean-up |
EN 14863:2005 | Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers |
EN ISO 1562 : 2004 | DENTISTRY - CASTING GOLD ALLOYS |
EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
EN ISO 10340 : 1996 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - METHOD FOR DETERMINING THE EXTRACTABLE SUBSTANCES |
EN ISO 4946:2016 | Steel and cast iron - Determination of copper - 2,2'-Biquinoline spectrophotometric method (ISO 4946:2016) |
EN ISO 105-E02:2013 | Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013) |
EN 16715:2015 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
EN 1644-1:1997 | Test methods for nonwoven compresses for medical use - Part 1: Nonwovens used in the manufacture of compresses |
EN 897:2012 | Chemicals used for treatment of water intended for human consumption - Sodium carbonate |
EN ISO 5402:2002 | Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method (ISO 5402:2002) |
EN 725-12:2001 | Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia |
EN 15041:2014 | Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polyphosphates |
EN ISO 1135-5:2015 | Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2015) |
EN ISO 105-C08:2010 | Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator (ISO 105-C08:2010) |
EN ISO 11507:2007 | Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007) |
EN 14984:2016 | Liming materials - Determination of product effect on soil pH - Soil incubation method |
EN ISO 16198:2015 | Soil quality - Plant-based test to assess the environmental bioavailability of trace elements to plants (ISO 16198:2015) |
EN 1421:2012 | Chemicals used for treatment of water intended for human consumption - Ammonium chloride |
EN ISO 10344 : 1998 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - SALINE SOLUTION FOR CONTACT LENS TESTING |
EN 15782:2009 | Animal feeding stuffs - Determination of nicarbazin - High-performance liquid chromatographic method |
EN ISO 17489:2013 | Leather - Chemical tests - Determination of tan content in synthetic tanning agents (ISO 17489:2013) |
EN 15492:2012 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
EN 4159:2011 | Aerospace series - Paints and varnishes - Determination of resistance to microbial growth |
EN ISO 105-E12:2010 | Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010) |
EN 15688:2008 | Fertilizers - Determination of urease inhibitor N-(n-butyl)thiophosphoric triamide (NBPT) using high-performance liquid chromatography (HPLC) |
EN 15835:2010 | Foodstuffs - Determination of ochratoxin A in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection |
EN ISO 11498:1999 | Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997) |
EN 14368:2015 | Products used for treatment of water intended for human consumption - Manganese dioxide coated limestone |
EN ISO 105-E03:2010 | Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010) |
EN ISO 17294-2:2016 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2016) |
EN 16037:2012 | Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfate |
EN ISO 6867:2000 | Animal feeding stuffs - Determination of vitamin E content - Method using high-performance liquid chromatography (ISO 6867:2000) |
EN ISO 19343:2017 | Microbiology of the food chain - Detection and quantification of histamine in fish and fishery products - HPLC method (ISO 19343:2017) |
EN ISO 3093:2009 | Wheat, rye and their flours, durum wheat and durum wheat semolina - Determination of the falling number according to Hagberg-Perten (ISO 3093:2009) |
EN 20105-A01 : 1992 | TEXTILES - TESTS FOR COLOUR FASTNESS - GENERAL PRINCIPLES OF TESTING |
EN ISO 15181-6:2014 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract (ISO 15181-6:2012) |
EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
EN ISO 20795-2:2013 | Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013) |
EN ISO 10523:2012 | Water quality - Determination of pH (ISO 10523:2008) |
EN 46-2:2016 | Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method) |
EN ISO 17304:2013 | Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013) |
EN ISO 4263-3:2015 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015) |
EN 13752:2012 | Products used for treatment of water intended for human consumption - Manganese dioxide |
EN 14397-2:2004 | Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials |
EN ISO 13900:2002 | Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997) |
EN 47:2016 | Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) |
EN 2436-002:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 002: High corrosion resistance |
EN 1988-1:1998 | Foodstuffs - Determination of sulfite - Part 1: Optimized Monier-Williams method |
EN ISO 12782-1:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid (ISO 12782-1:2012) |
EN ISO 28888:2013 | Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues (ISO 28888:2013) |
EN ISO 9073-8:1998 | Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995) |
EN 16618:2015 | Food analysis - Determination of acrylamide in food by liquid chromatography tandem mass spectrometry (LC-ESI-MS/MS) |
EN 14526:2017 | Foodstuffs - Determination of saxitoxin-group toxins in shellfish - HPLC method using pre-column derivatization with peroxide or periodate oxidation |
EN 2436-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 005: For exterior use with surface preparation tolerance |
EN ISO 17678:2010 | Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) (ISO 17678:2010) |
EN 14176:2017 | Foodstuffs - Determination of domoic acid in raw shellfish, raw finfish and cooked mussels by RP-HPLC using UV detection |
EN 15911:2010 | Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection |
EN 16857:2017 | Foodstuffs - Determination of benzene in soft drinks, other beverages and vegetable-based infant foods by headspace gas chromatography mass spectrometry (HS-GC-MS) |
EN ISO 14189:2016 | Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration (ISO 14189:2013) |
EN ISO 105-Z04:1997 | Textiles - Tests for colour fastness - Part Z09: Dispersibility of disperse dyes (ISO 105-Z04:1995) |
EN ISO 6871-2 : 1996 | DENTAL BASE METAL CASTING ALLOYS - NICKEL-BASED ALLOYS |
EN 16174:2012 | Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements |
EN ISO 8871-1:2004 | Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates (ISO 8871-1:2003) |
EN 14164:2014 | Foodstuffs - Determination of vitamin B6 by high performance chromatography |
EN 16070:2014 | Products used for treatment of water intended for human consumption - Natural zeolite |
EN 16924:2017 | Foodstuffs - Determination of zearalenone in edible vegetable oils by LC-FLD or LC-MS/MS |
EN ISO 105-E04:2013 | Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013) |
EN ISO 10321:2008 | Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008) |
EN ISO 17294-1:2006 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
EN ISO 5163:2014 | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014) |
EN 1409:2008 | Chemicals used for water treatment intended for human consumption - Polyamines |
EN 1897 : 2001 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE COMPRESSIVE CREEP PROPERTIES |
EN ISO 5667-15:2009 | Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009) |
EN ISO 591-1:2000 | Titanium dioxide pigments for paints - Part 1: Specifications and methods of test (ISO 591-1:2000) |
EN 1988-2:1998 | Foodstuffs - Determination of sulfite - Part 2: Enzymatic method |
EN ISO 9626:2016 | Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016) |
EN 14483-1:2004 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature |
EN ISO 28706-1:2011 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008) |
EN ISO 12228-2:2014 | Determination of individual and total sterols contents - Gas chromatographic method - Part 2: Olive and olive pomace oils (ISO 12228-2:2014) |
EN ISO 14184-1:2011 | Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) (ISO 14184-1:2011) |
EN ISO 13759:1996 | Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996) |
EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
EN 888:2004 | Chemicals used for treatment of water intended for human consumption - Iron (III) chloride |
EN ISO 10993-13:2010 | Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:2010) |
EN ISO 3380:2015 | Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C (ISO 3380:2015) |
EN ISO 4263-2:2003 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003) |
EN ISO 9073-11:2004 | Textiles - Test methods for nonwovens - Part 11: Run-off (ISO 9073-11:2002) |
EN ISO 5402-1:2017 | Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402-1:2017) |
EN ISO 10416:2009 | Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008) |
EN ISO 15324:2008 | Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test (ISO 15324:2000) |
EN 15608:2008 | Surface active agents - Quantitative determination of free fatty acid in alkylamidopropylbetaines - Gas-chromatographic method |
EN ISO 3826-1:2013 | Plastics collapsible containers for human blood and blood components - Part 1: Conventional containers (ISO 3826-1:2013) |
EN ISO 5403:2002 | Leather - Physical and mechanical tests - Determination of water resistance of flexible leather (ISO 5403:2002) |
EN ISO 8989:1998 | Plastics - Liquid phenolic resins - Determination of water miscibility (ISO 8989:1995) |
EN 902:2016 | Chemicals used for treatment of water intended for human consumption - Hydrogen peroxide |
EN ISO 5509:2000 | Animal and vegetable fats and oils - Preparation of methyl esters of fatty acids (ISO 5509:2000) |
EN 16204:2012 | Foodstuffs - Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS |
EN 14833:2005 | Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
EN 15768:2015 | Influence of materials on water intended for human consumption - GC-MS identification of water leachable organic substances |
BS ISO 16772:2004 | Soil quality. Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry |
15/30287635 DC : 0 | BS ISO 18862 - ANALYSIS OF COFFEE AND COFFEE PRODUCTS - DETERMINATION OF ACRYLAMIDE - METHODS USING HPLC-MS/MS AND GC-MS AFTER DERIVATISATION |
DIN EN ISO 20795-1:2013-06 | DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS (ISO 20795-1:2013) |
03/307373 DC : DRAFT MAY 2003 | EN 49-1 - WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST ANOBIUM PUNCTATUM (DE GEER) BY EGG-LAYING AND LARVAL SURVIVAL - PART 1: APPLICATION BY SURFACE TREATMENT (LABORATORY METHOD) |
I.S. EN ISO 19448:2018 | DENTISTRY - ANALYSIS OF FLUORIDE CONCENTRATION IN AQUEOUS SOLUTIONS BY USE OF FLUORIDE-ION SELECTIVE ELECTRODE (ISO 19448:2018) |
PREN 13361 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
DIN ISO 4619 E : 2002 | DRIERS FOR PAINTS AND VARNISHES |
PREN 60661 : DRAFT 2012 | METHODS FOR MEASURING THE PERFORMANCE OF ELECTRIC HOUSEHOLD COFFEE MAKERS (IEC 60661:1999, MODIFIED + A1:2003, MODIFIED + A2:2005, MODIFIED) |
DIN EN 15845:2010-05 | Paper and board - Determination of the cytotoxicity of aqueous extracts |
03/108761 DC : DRAFT MAY 2003 | EN ISO 10477 - DENTISTRY - POLYMER-BASED CROWN AND BRIDGE MATERIALS |
04/30116845 DC : DRAFT JUL 2004 | ISO 18252 - ANHYDROUS MILK FAT - DETERMINATION OF STEROL COMPOSITION BY GAS LIQUID CHROMATOGRAPHY (ROUTINE METHOD) |
BS ISO 6370-2:2011 | Vitreous and porcelain enamels. Determination of the resistance to abrasion Loss in mass after sub-surface abrasion |
DIN EN ISO 17730:2015-03 | Dentistry - Fluoride varnishes (ISO 17730:2014); German version EN ISO 17730:2014 |
UNE-ISO 6588-2:2013 | Paper, board and pulps. Determination of pH of aqueous extracts. Part 2: Hot extraction |
DIN EN ISO 9073-16:2009-01 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 16: DETERMINATION OF RESISTANCE TO PENETRATION BY WATER (HYDROSTATIC PRESSURE) |
UNE-EN 152:2012 | Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method |
BS 2000-196(1997) : 1997 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF COLOUR (ASTM SCALE) |
BS EN 14997:2015 | Characterization of waste. Leaching behaviour test. Influence of pH on leaching with continuous pH control |
03/300546 DC : DRAFT FEB 2003 | EN 890 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) SULFATE |
12/30256092 DC : DRAFT JAN 2012 | BS EN ISO 17489 - LEATHER - CHEMICAL TESTS - DETERMINATION OF TAN CONTENT OF TANNING AGENTS |
PREN 12945 : DRAFT 2012 | LIMING MATERIALS - DETERMINATION OF NEUTRALIZING VALUE - TITRIMETRIC METHODS |
PREN 14944-3 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
DIN ISO 17289:2014-12 | WATER QUALITY - DETERMINATION OF DISSOLVED OXYGEN - OPTICAL SENSOR METHOD (ISO 17289:2014) |
15/30319507 DC : 0 | BS EN ISO 17075-2 - LEATHER - CHEMICAL DETERMINATION OF CHROMIUM(6) CONTENT IN LEATHER - PART 2: CHROMATOGRAPHIC METHOD |
PD CEN/TS 16677:2014 | Ophthalmic optics. Reference method for the testing of spectacle frames and sunglasses for nickel release |
14/30303444 DC : 0 | BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS |
03/313972 DC : DRAFT NOV 2003 | EN 1199 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - DISODIUM HYDROGEN ORTHOPHOSPHATE |
BS ISO 15681-1 : 2003 AMD 15545 | WATER QUALITY - DETERMINATION OF ORTHOPHOSPHATE AND TOTAL PHOSPHORUS CONTENTS BY FLOW ANALYSIS (FIA AND CFA) - PART 1: METHOD BY FLOW INJECTION ANALYSIS (FIA) |
BS 5724-2.124(1998) : 1998 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
BS EN ISO 11997-1:2017 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humid |
DIN EN ISO 12782-5:2012-09 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 5: EXTRACTION OF HUMIC SUBSTANCES FROM AQUEOUS SAMPLES (ISO 12782-5:2012) |
ISO/TS 17576:2004 | Dentistry Corrosion tests for amalgam |
17/30362321 DC : 0 | BS EN ISO 23161 - SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD |
BS ISO 13291:2006 | Zinc sulfide concentrates. Determination of zinc. Solvent extraction and EDTA titrimetric method |
UNE-EN ISO 17075-2:2018 | Leather - Chemical determination of chromium(VI) content in leather - Part 2: Chromatographic method (ISO 17075-2:2017) |
UNI EN 15482 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM PERMANGANATE |
17/30360620 DC : 0 | BS EN ISO 17072-1 - LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
08/30179307 DC : DRAFT MAY 2008 | BS EN 15477 - FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
BS ISO 11174:1996 | Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electro-thermal atomic absorption spectrometric method |
ISO 14898:1999 | Plastics Aromatic isocyanates for use in the production of polyurethane Determination of acidity |
BS 2000-237(2014) : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
BS EN 15604:2009 | Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen |
12/30258758 DC : 0 | BS EN 12823-1 - FOODSTUFFS - DETERMINATION OF VITAMIN A BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - PART 1: MEASUREMENTS OF ALL-TRANS-RETINOL AND 13-CIS-RETINOL |
ISO 17190-7:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 7: Gravimetric determination of absorption under pressure |
15/30280962 DC : 0 | BS ISO 18645 - FERTILIZERS AND SOIL CONDITIONERS - WATER SOLUBLE COMPOUND FERTILIZER - GENERAL REQUIREMENTS |
I.S. EN ISO 12228-1:2014 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS (ISO 12228-1:2014) |
09/30178083 DC : 0 | BS EN 60601-2-24 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-24: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFUSION PUMPS AND CONTROLLERS |
02/122677 DC : DRAFT JUN 2002 | ISO/DIS 20763 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF ANTI-WEAR PROPERTIES OF HYDRAULIC FLUIDS - VANE PUMP METHOD |
DIN ISO 9120:2005-08 | Petroleum and related products - Determination of air-release properties of steam turbine and other oils - Impinger method (ISO 9120:1997) |
PREN 16086-2 : DRAFT 2010 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PLANT RESPONSE - PART 2: PETRI DISH TEST USING CRESS |
DIN EN 16923:2015-11 (Draft) | FOODSTUFFS - DETERMINATION OF T-2 TOXIN AND HT-2 TOXIN IN CEREALS AND CEREAL PRODUCTS FOR INFANTS AND YOUNG CHILDREN BY LC-MS/MS AFTER SPE CLEANUP |
PD CEN ISO/TS 16179:2012 | Footwear. Critical substances potentially present in footwear and footwear components. Determination of organotin compounds in footwear materials |
12/30259741 DC : 0 | BS EN 60661 - METHODS FOR MEASURING THE PERFORMANCE OF ELECTRIC HOUSEHOLD COFFEE MAKERS |
DIN EN ISO 5403-1:2012-03 | Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer) (ISO 5403-1:2011) |
ISO 14377:2002 | Canned evaporated milk — Determination of tin content — Method using graphite furnace atomic absorption spectrometry |
I.S. EN ISO 3823-1:1999 | DENTAL ROTARY INSTRUMENTS - BURS - PART 1: STEEL AND CARBIDE BURS |
15/30316149 DC : 0 | BS ISO 13357-2 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OIL |
05/30133797 DC : DRAFT MAY 2005 | BS EN 14582 - CHARACTERISATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
UNE-EN ISO 16265:2012 | Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA) (ISO 16265:2009) |
PREN 14944-1 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
UNI EN 16075 : 2012 | FERTILIZERS - DETERMINATION OF N-(2-NITROPHENYL)PHOSPHORIC TRIAMIDE (2-NPT) IN UREA AND FERTILIZERS CONTAINING UREA - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
BS EN 15909:2010 | Fertilizers. Determination of calcium and formate in calcium foliar fertilizers |
14/30263831 DC : 0 | BS ISO 18070 - CORROSION OF METALS AND ALLOYS - CREVICE CORROSION FORMERS WITH DISC SPRINGS FOR FLAT SPECIMENS OR TUBES OF STAINLESS STEELS IN CORROSIVE SOLUTIONS |
UNI EN 15479 : 2009 | FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
BS ISO 3400 : 1997 | CIGARETTES - DETERMINATION OF ALKALOIDS IN SMOKE CONDENSATES - SPECTROMETRIC METHOD |
BS EN 15933:2012 | Sludge, treated biowaste and soil. Determination of pH |
BS ISO 6885 : 2006 AMD 17393 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ANISIDINE VALUE |
BS ISO 17586:2016 | Soil quality. Extraction of trace elements using dilute nitric acid |
BS EN ISO 23913:2009 | Water quality. Determination of Chromium(VI). Method using flow analysis (FIA and CFA) and spectrometric detection |
DIN EN 15791:2009-12 | Animal feeding stuffs - Determination of Deoxynivalenol in animal feed - High performance liquid chromatographic method with UV detection and immunoaffinity column clean-up |
BS 7755-3.13:1998 | Soil quality. Chemical methods Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil. Flame and electrothermal atomic absorption spectrometric methods |
BS 3900-B16:1990 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Determination of total mercury |
I.S. EN ISO 11402:2005 | PHENOLIC, AMINO AND CONDENSATION RESINS - DETERMINATION OF FREE-FORMALDEHYDE CONTENT |
I.S. EN 15559:2009 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO ARND |
I.S. EN 15478:2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
07/30158574 DC : 0 | BS EN 12945 - LIMING MATERIALS - DETERMINATION OF NEUTRALIZING VALUE - TITRIMETRIC METHODS |
01/713568 DC : DRAFT OCT 2001 | ISO/DIS 17058 - STEEL AND IRON - DETERMINATION OF ARSENIC CONTENT - SPECTROPHOTOMETRIC METHOD |
09/30195714 DC : 0 | BS ISO 29941 - CONDOMS - DETERMINATION OF NITROSAMINES MIGRATING FROM NATURAL RUBBER LATEX CONDOMS INTO VARIOUS MEDIA |
I.S. EN ISO 5402:2003 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY FLEXOMETER METHOD |
DIN EN ISO 17694 E : 2016 | FOOTWEAR - TEST METHODS FOR UPPERS AND LINING - FLEX RESISTANCE (ISO 17694:2016) |
DIN EN ISO 8130-3:2011-02 | Coating powders - Part 3: Determination of density by liquid displacement pyknometer (ISO 8130-3:1992) |
08/30159366 DC : DRAFT FEB 2008 | BS ISO 26482 - HARDMETALS - DETERMINATION OF LEAD AND CADMIUM |
PREN 12175 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - HEXAFLUOROSILICIC ACID |
98/124702 DC : DRAFT OCT 1998 | DRAFT BS 3900-K3 - METHODS OF TEST FOR PAINTS - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - DETERMINATION OF TIN-BASED BIOCIDES IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
BS ISO 13899-2:2005 | Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method Determination of Nb Content |
BS ISO 19724:2016 | Gasoline engines with direct injection. Cleanliness assessment of fuel injection equipment |
14/30255593 DC : 0 | BS ISO 17608 - TEXTILES - BARE ELASTANE YARNS - DETERMINATION OF RESISTANCE TO CHLORINATED WATER (SWIMMING-POOL WATER) |
15/30325377 DC : 0 | BS EN ISO 20863 - FOOTWEAR - TEST METHODS FOR STIFFENERS AND TOEPUFFS - BONDABILITY |
DD ENV 14226:2002 | Advanced technical ceramics. Test methods for ceramic powders. Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES) |
BS ISO 17280:2015 | Surface active agents. Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography |
13/30259625 DC : 0 | BS ISO 14388-2 - SOIL QUALITY - ACID-BASE ACCOUNTING PROCEDURE FOR ACID SULFATE SOILS - PART 2: CHROMIUM REDUCIBLE SULFUR (CRS) METHODOLOGY |
I.S. EN ISO 4630-1:2005 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD |
BS 2000-461(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
DD CEN/TS 15750:2008 | Fertilizers. Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
NF EN ISO 27587 : 2009 | LEATHER - CHEMICAL TESTS - DETERMINATION OF THE FREE FORMALDEHYDE IN PROCESS AUXILIARIES |
BS EN 16168:2012 | Sludge, treated biowaste and soil. Determination of total nitrogen using dry combustion method |
BS ISO 22303:2008 | Tobacco. Determination of tobacco specific nitrosamines. Method using buffer extraction |
09/30203049 DC : 0 | BS EN 10351 - CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN (ROUTINE METHOD) |
I.S. EN ISO 4934:2004 | STEEL AND IRON - DETERMINATION OF SULFUR CONTENT - GRAVIMETRIC METHOD |
15/30327163 DC : 0 | BS EN 937 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHLORINE |
BS EN ISO 19074:2015 | Leather. Physical and mechanical tests. Determination of water absorption by capillary action (wicking) |
BS EN 16694:2015 | Water quality. Determination of selected polybrominated diphenly ether (PBDE) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS) |
PREN 15477 : DRAFT 2015 | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
BS ISO 27368:2008 | Analysis of blood for asphyxiant toxicants. Carbon monoxide and hydrogen cyanide |
DIN ISO 10478:2016-07 | Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods (ISO 10478:1994) |
BS ISO 13741-1:1998 | Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography Direct liquid injection method |
16/30338105 DC : 0 | BS EN 16994 - CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
14/30304804 DC : 0 | BS EN 14405 - CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
12/30257345 DC : 0 | BS EN 13368-1 - FERTILIZERS - DETERMINATION OF CHELATING AGENTS IN FERTILIZERS BY CHROMATOGRAPHY - PART 1: DETERMINATION OF EDTA, HEEDTA AND DTPA BY ION CHROMATOGRAPHY |
ISO 10336:1997 | Crude petroleum — Determination of water — Potentiometric Karl Fischer titration method |
DIN EN ISO 19343:2016-05 (Draft) | MICROBIOLOGY OF THE FOOD CHAIN - DETECTION AND QUANTIFICATION OF HISTAMINE IN FISH AND FISHERY PRODUCTS - HPLC METHOD (ISO 19343:2017) |
08/30168851 DC : DRAFT JULY 2008 | BS EN ISO 11609 - DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING |
BS 2000-58(2015) : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
BS 2000-573(2009) : 2009 | ETHANOL AS A BLENDING COMPONENT OF PETROL - DETERMINATION OF APPEARANCE - VISUAL METHOD |
I.S. CEN/TS 15408:2006 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF SULPHUR (S), CHLORINE (CL), FLUORINE (F) AND BROMINE (BR) CONTENT |
BS ISO 15202-2:2012 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Sample preparation |
I.S. EN 16694:2015 | WATER QUALITY - DETERMINATION OF SELECTED POLYBROMINATED DIPHENYL ETHER (PBDE) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY - MASS SPECTROMETRY (GC-MS) |
14/30301977 DC : 0 | BS ISO 10204 - IRON ORES - DETERMINATION OF MAGNESIUM - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
I.S. EN ISO 5509:2000 | ANIMAL AND VEGETABLE FATS AND OILS- PREPARATION OF METHYL ESTERS OF FATTY ACIDS |
09/30207759 DC : 0 | BS ISO 17226-3 - LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 3: DETERMINATION OF FORMALDEHYDE EMISSIONS FROM LEATHER |
12/30268242 DC : 0 | BS EN 12174 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE |
UNE-EN ISO 2812-3:2013 | Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012) |
BS EN ISO 1135-5:2015 | Transfusion equipment for medical use Transfusion sets for single use with pressure infusion apparatus |
BS ISO 18632:2010 | Alloyed steel. Determination of manganese. Potentiometric and visual titration method |
DIN EN ISO 10873:2010-12 | Dentistry - Denture adhesives (ISO 10873:2010) |
15/30315525 DC : 0 | BS ISO 4802-1 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
BS ISO 15625:2014 | Silk. Electronic test method for defects and evenness of raw silk |
I.S. EN ISO 18218-2:2015 | LEATHER - DETERMINATION OF ETHOXYLATED ALKYLPHENOLS - PART 2: INDIRECT METHOD (ISO 18218-2:2015) |
S.R. CEN/TS 16384:2012 | SYNTHETIC SPORT SYSTEMS - LEACHING TEST |
I.S. EN ISO 6271-1:2005 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE - PART 1: VISUAL METHOD |
I.S. EN ISO 15181-5:2008 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 5: CALCULATION OF THE TOLYLFLUANID AND DICHLOFLUANID RELEASE RATE BY DETERMINATION OF THE CONCENTRATION OF DIMETHYLTOLYLSULFAMIDE (DMST) AND DIMETHYLPHENYLSULFAMIDE (DMSA) IN THE EXTRACT |
I.S. EN 15451:2008 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY EDDHSA BY ION PAIR CHROMATOGRAPHY |
IP 91 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
BS EN ISO 17226-3:2011 | Leather. Chemical determination of formaldehyde content Determination of formaldehyde emissions from leather |
BS EN ISO 1135-3:2017 | Transfusion equipment for medical use Blood-taking sets for single use |
S.R. CEN/TR 10353:2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - ANALYSIS OF FERRO-SILICON - DETERMINATION OF AL, TI AND P BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
BS EN ISO 17698:2016 | Footwear. Test methods for uppers. Delamination resistance |
DIN EN ISO 10703:2015-12 | Water quality - Determination of the activity concentration of radionuclides - Method by high resolution gamma-ray spectrometry (ISO 10703:2007) |
DD CEN/TS 15119-2:2008 | Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water). Laboratory method |
BS ISO 19699-1:2017 | Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood Test methods |
I.S. EN ISO 18465:2017 | MICROBIOLOGY OF THE FOOD CHAIN - QUANTITATIVE DETERMINATION OF EMETIC TOXIN (CEREULIDE) USING LC-MS/MS (ISO 18465:2017) |
DIN EN ISO 10523:2012-04 | Water quality - Determination of pH (ISO 10523:2008) |
UNE-EN ISO 16960:2015 | Natural gas - Determination of sulfur compounds - Determination of total sulfur by oxidative microcoulometry method (ISO 16960:2014) |
13/30263103 DC : 0 | BS ISO 18074 - TEXTILES - IDENTIFICATION OF SOME ANIMAL FIBRES BY DNA ANALYSIS METHOD - CASHMERE, WOOL, YAK AND THEIR BLENDS |
BS 2000-276(1995) : 1995 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF BASE NUMBER - PERCHLORIC ACID POTENTIOMETRIC TITRATION METHOD |
IP 272 : 2016 | DETERMINATION OF MERCAPTAN SULFUR AND HYDROGEN SULFIDE CONTENT OF LIQUEFIED PETROLEUM GASES (LPG) - ELECTROMETRIC TITRATION METHOD |
I.S. EN ISO 13294:1998 | DENTAL HANDPIECES - DENTAL AIR-MOTORS |
DD ENV 14138:2001 | Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emissions spectrometry (ICP-ES), after separation by co-precipitation |
PREN 14112 : DRAFT 2014 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
BS EN ISO 12311:2013 | Personal protective equipment. Test methods for sunglasses and related eyewear |
PREN 1421 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM CHLORIDE |
BS ISO 9682-2:2006 | Iron ores. Determination of manganese content Periodate spectrophotometric method |
12/30231426 DC : 0 | BS ISO 13165-1 - WATER QUALITY - RADIUM 226 - PART 1: TEST METHOD USING LIQUID SCINTILLATION COUNTING |
DIN EN ISO 19071:2016-07 | LEATHER - CHEMICAL TESTS - DETERMINATION OF CHROMIUM(6) AND THE REDUCTIVE POTENTIAL FOR CHROMIUM TANNING AGENTS (ISO 19071:2016) |
ISO 18746:2016 | Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use |
12/30257324 DC : DRAFT MAR 2012 | BS EN 12912 - PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - BARITE |
DD ISO/TS 16878:2010 | Direct reduced iron and hot briquetted iron. Determination of metallic iron. Iron(III) chloride titrimetric method |
16/30335133 DC : 0 | BS EN 17043 - FERTILIZERS - DETERMINATION OF MOLYBDENUM IN CONCENTRATIONS <= 10% USING SPECTROMETRY OF A COMPLEX WITH AMMONIUM THIOCYANATE |
BS ISO 6668:2008 | Green coffee. Preparation of samples for use in sensory analysis |
NF ISO 28641 : 2010 | RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS |
BS ISO 8425:2013 | Nuclear fuel technology. Determination of plutonium in pure plutonium nitrate solutions. Gravimetric method |
BS ISO 17380:2004 | Soil quality. Determination of total cyanide and easily released cyanide. Continuous-flow analysis method |
BS EN ISO 18369-3:2017 | Ophthalmic optics. Contact lenses Measurement methods |
DIN EN 13523-8:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
98/125144 DC : DRAFT OCT 98 | DRAFT BS EN ISO 8655-6 - PISTON-OPERATED VOLUMETRIC INSTRUMENTS - PART 6: GRAVIMETRIC TEST METHODS |
06/30149794 DC : DRAFT MAY 2006 | ISO 11379 - TEXTILE FLOOR COVERINGS - LABORATORY CLEANING PROCEDURE USING SPRAY EXTRACTION |
BS ISO 7206-6:2013 | Implants for surgery. Partial and total hip joint prostheses Endurance properties testing and performance requirements of neck region of stemmed femoral components |
PREN 12125 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM THIOSULFATE |
00/562026 DC : DRAFT MAY 2000 | ISO 17190-2 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 2: DETERMINATION OF AMOUNT OF RESIDUAL MONOMER |
PREN 12671 : DRAFT 2014 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHLORINE DIOXIDE GENERATED IN SITU |
10/30233840 DC : 0 | BS ISO 3826-1 - PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 1: CONVENTIONAL CONTAINERS |
BS ISO 17608:2015 | Textiles. Bare elastane yarns. Determination of resistance to chlorinated water (swimming-pool water) |
ISO/TS 14569-1:1999 | Dental materials Guidance on testing of wear Part 1: Wear by toothbrushing |
PREN 117 : DRAFT 2012 | WOOD PRESERVATIVES - DETERMINATION OF TOXIC VALUES AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
14/30206260 DC : 0 | BS ISO 15825 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF AGGREGATE SIZE DISTRIBUTION BY DISC CENTRIFUGE PHOTOSEDIMENTOMETRY |
DIN ISO 20179:2007-10 | Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection (ISO 20179:2005) |
PREN 118 : DRAFT 2013 | WOOD PRESERVATIVES - DETERMINATION OF PREVENTIVE ACTION AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
03/309335 DC : DRAFT JUNE 2003 | EN 14712 - SURFACE ACTIVE AGENTS - DETERMINATION OF PHYSICAL STABILITY IN ALKALINE AND ACID SOLUTIONS |
BS ISO 13165-3:2016 | Water quality. Radium-226 Test method using coprecipitation and gamma-spectrometry |
DD ENV 14029:2001 | Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix |
03/306725 DC : DRAFT MAY 2003 | EN 14669 - SURFACE ACTIVE AGENTS - DETERMINATION OF ANIONIC SURFACE ACTIVE AGENTS AND SOAPS IN DETERGENTS AND CLEANSERS - POTENTIOMETRIC TWO-PHASE TITRATION METHOD |
ISO/TS 11080:2009 | Dentistry Essential characteristics of test methods for the evaluation of treatment methods intended to improve or maintain the microbiological quality of dental unit procedural water |
ENV 12038:2002 | Durability of wood and wood-based products - Wood-based panels - Method of test for determining the resistance against wood-destroying basidiomycetes |
I.S. CEN TS 15478:2006 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
BS ISO 16145-4:2013 | Ships and marine technology. Protective coatings and inspection method Automated measuring method for the total amount of water-soluble salts |
UNI EN ISO 14719 : 2012 | CHEMICAL ANALYSIS OF REFRACTORY MATERIAL GLASS AND GLAZES - DETERMINATION OF FE[2+] AND FE[3+] BY THE SPECTRAL PHOTOMETRIC METHOD WITH 1,10-PHENANTHROLINE |
04/30108533 DC : DRAFT JAN 2004 | EN 14881 - SURFACE ACTIVE AGENTS - DETERMINATION OF N-(3-DIMETHYLAMINOPROPYL)-ALKYLAMIDE CONTENT IN ALKYLAMIDOPROPYLBETAINES - GAS-CHROMATOGRAPHIC METHOD |
BS EN 15768:2015 | Influence of materials on water intended for human consumption. GC-MS identification of water leachable organic substances |
BS ISO 15028:2014 | Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of hydrolysable chlorine |
09/30210420 DC : 0 | BS EN ISO 439 - STEEL AND IRON - DETERMINATION OF TOTAL SILICON CONTENT - GRAVIMETRIC METHOD |
BS 2000-510(2004) : 2004 | PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD |
BIS IS 15188 : 2012 | WATER QUALITY - GENERAL GUIDANCE ON THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
04/19988924 DC : DRAFT AUG 2004 | EN 4170 - AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR MEASUREMENT OF RESISTANCE TO COLD CRACK TEMPERATURE CYCLE |
DIN EN ISO 6271:2016-05 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT COLOUR SCALE (ISO 6271:2015) |
17/30347660 DC : 0 | BS ISO 18256-2 - NUCLEAR FUEL TECHNOLOGY - DISSOLUTION OF PLUTONIUM DIOXIDE-CONTAINING MATERIALS - PART 2: DISSOLUTION OF MOX PELLETS AND POWDERS |
DIN EN ISO 25619-1:2009-06 | Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2008) |
BS EN ISO 21078-1:2008 | Determination of boron (III) oxide in refractory products Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes |
BS EN 15750:2009 | Fertilizers. Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
09/30198228 DC : DRAFT JAN 2009 | BS EN 15891 - FOODSTUFFS - DETERMINATION OF DEOXYNIVALENOL IN CEREALS, CEREAL PRODUCTS AND CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND UV DETECTION |
10/30213000 DC : 0 | BS EN 15410 - SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI) |
UNE-EN 16619:2015 | Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by gas chromatography mass spectrometry (GC-MS) |
15/30317860 DC : 0 | BS EN 14526 - FOODSTUFFS - DETERMINATION OF SAXITOXIN-GROUP TOXINS IN SHELLFISH - HPLC METHOD USING PRE-COLUMN DERIVATIZATION WITH PEROXIDE OR PERIODATE OXIDATION |
14/30250835 DC : 0 | BS ISO 17318 - FERTILIZERS AND SOIL CONDITIONERS - DETERMINATION OF ARSENIC, CADMIUM, CHROMIUM, LEAD AND MERCURY CONTENTS |
BS EN ISO 10873:2010 | Dentistry. Denture adhesives |
BS EN ISO 28706-3:2011 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel |
15/30318322 DC : 0 | BS EN 13075-2 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
16/30341847 DC : 0 | BS EN 62321-8 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 8: PHTHALATES IN POLYMERS BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC- MS), PYROLYSIS/THERMAL DESORPTION-GAS CHROMATOGRAPHY-MASS SPECTROMETRY (PY/TD-GC-MS) |
BS ISO 7238:2004 | Butter. Determination of pH of the serum. Potentiometric method |
BS EN ISO 12228-2:2014 | Determination of individual and total sterols contents. Gas chromatographic method Olive and olive pomace oils |
BS EN 14429:2015 | Characterization of waste. Leaching behaviour test. Influence of pH on leaching with initial acid/base addition |
I.S. EN 14166:2009 | FOODSTUFFS - DETERMINATION OF VITAMIN B[6] BY MICROBIOLOGICAL ASSAY |
BS 6200-3.40.1:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. General requirements and sample dissolution |
DIN EN ISO 4787:2011-05 | Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15) |
03/109091 DC : DRAFT JULY 2003 | BS ISO 15825 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF AGGREGATE SIZE DISTRIBUTION BY DISK CENTRIFUGE PHOTOSEDIMENTOMETRY |
18/30366795 DC : DRAFT JAN 2018 | BS EN 17215 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON-BASED COAGULANTS - ANALYTICAL METHODS |
03/306723 DC : DRAFT MAY 2003 | EN 14667 - SURFACE ACTIVE AGENTS - DETERMINATION OF LOW BOILING SOLVENTS IN LIQUID FORMULATIONS - GAS CHROMATOGRAPHIC METHOD |
I.S. EN ISO 16373-2:2014 | TEXTILES - DYESTUFFS - PART 2: GENERAL METHOD FOR THE DETERMINATION OF EXTRACTABLE DYESTUFFS INCLUDING ALLERGENIC AND CARCINOGENIC DYESTUFFS (METHOD USING PYRIDINE-WATER) (ISO 16373-2:2014) |
PD CEN/TR 10353:2011 | Chemical analysis of ferrous materials. Analysis of ferro-silicon. Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry |
PD CEN/TS 16621:2014 | Food analysis. Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by high performance liquid chromatography with fluorescence detection (HPLC-FD) |
DD CEN/TS 15410:2006 | Solid recovered fuels. Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
ISO 14242-1:2014 | Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test |
AAMI ISO 10993-15 : 2000 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 15: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM METALS AND ALLOYS |
UNI EN 1568-1 : 2008 | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 1: SPECIFICATION FOR MEDIUM EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
UNE-EN 15410:2012 | Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
DIN EN 15769:2009-08 | ETHANOL AS A BLENDING COMPONENT OF PETROL - DETERMINATION OF APPEARANCE - VISUAL METHOD |
I.S. EN ISO 14362-3:2017 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 3: DETECTION OF THE USE OF CERTAIN AZO COLORANTS, WHICH MAY RELEASE 4-AMINOAZOBENZENE (ISO 14362-3:2017) |
DIN 50451-2:2003-04 | Determination of trace elements in liquids for use in semiconductor technology - Part 2: Determination of calcium, chromium, cobalt, copper, iron, nickel and zinc in hydrofluoric acid by plasma emission spectroscopy |
BS 6200-3.22.4(1997) : 1997 | SAMPLING AND ANALYSIS OF IRON, STEEL AND OTHER FERROUS METALS - METHODS OF ANALYSIS - DETERMINATION OF NITROGEN - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS |
BS EN 15408:2011 | Solid recovered fuels. Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
13/30278476 DC : 0 | BS ISO 15028 - PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF HYDROLYSABLE CHLORINE |
BS EN ISO 2812-5:2007 | Paints and varnishes. Determination of resistance to liquids Temperature-gradient oven method |
PREN 937 : DRAFT 2015 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CHLORINE |
13/30253060 DC : 0 | BS ISO 17322 - FERTILIZERS AND SOIL CONDITIONERS - SULFUR COATED UREA (SCU) - ANALYTICAL METHODS |
BS ISO 11535:2006 | Iron ores. Determination of various elements. Inductively coupled plasma atomic emission spectrometric method |
05/30126092 DC : 0 | EN 1568-3 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 3: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
UNE-EN 16715:2016 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
DIN EN ISO 1135-3:2014-12 (Draft) | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
DIN EN ISO 18465:2017-05 | MICROBIOLOGY OF THE FOOD CHAIN - QUANTITATIVE DETERMINATION OF EMETIC TOXIN (CEREULIDE) USING LC-MS/MS (ISO 18465:2017) |
17/30352703 DC : 0 | BS IEC 62607-4-7 ED1.0 - NANOMANUFACTURING - KEY CONTROL CHARACTERISTICS - PART 4-7: ANODE NANO-MATERIALS FOR NANO-ENABLED ELECTRICAL ENERGY STORAGE - DETERMINATION OF MAGNETIC IMPURITIES, ICP-OES METHOD |
PD CEN/TR 14839:2004 | Wood preservatives. Determination of the preventive efficacy against wood destroying basidiomycetes fungi |
13/30250767 DC : 0 | BS ISO 17182 - SOIL QUALITY - DETERMINATION OF SOME SELECTED PHENOLS AND CHLOROPHENOLS - GAS CHROMATOGRAPHIC METHOD WITH MASS SPECTROMETRIC DETECTION |
03/306705 DC : DRAFT APR 2003 | ISO 6588-2 - PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 2: HOT EXTRACTION |
12/30268200 DC : 0 | BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
BS ISO 15029-2:2018 | Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray test. Stabilised flame heat release method |
DIN EN ISO 12966-4:2015-11 | ANIMAL AND VEGETABLE FATS AND OILS - GAS CHROMATOGRAPHY OF FATTY ACID METHYL ESTERS - PART 4: DETERMINATION BY CAPILLARY GAS CHROMATOGRAPHY (ISO 12966-4:2015) |
BS ISO 11704 : 2010 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD |
PD ISO/TS 17951-1:2016 | Water quality. Determination of fluoride using flow analysis (FIA and CFA) Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation |
09/30172497 DC : 0 | BS EN ISO 7887 REV - WATER QUALITY - EXAMINATION AND DETERMINATION OF COLOUR |
DIN EN 16711-1:2016-02 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
12/30266865 DC : 0 | BS EN 16070 - PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - NATURAL ZEOLITE |
BS EN ISO 28706-2:2017 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours |
BS 7755-3.10(1995) : 1995 | SOIL QUALITY - PART 3: CHEMICAL METHODS - SECTION 10: DETERMINATION OF CARBONATE CONTENT - VOLUMETRIC METHOD |
05/30104991 DC : DRAFT MAY 2005 | EN 1390 - WOOD PRESERVATIVES - DETERMINATION OF THE ERADICANT ACTION AGAINST HYLOTRUPES BAJULUS (LINNAEUS) LARVAE - LABORATORY METHOD |
IP 136 SECTION 2 : 1999 | PETROLEUM PRODUCTS - DETERMINATION OF SAPONIFICATION NUMBER - PART 2: POTENTIOMETRIC TITRATION METHOD |
DIN 38405-35:2004-09 | METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE - ANIONS (GROUP D) - PART 35: DETERMINATION OF ARSENIC - METHOD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) (D 35) |
BS 2000-313(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF AIR RELEASE OF LUBRICATING AND HYDRAULIC OILS |
BS ISO 15682 : 2000 AMD 13448 | WATER QUALITY - DETERMINATION OF CHLORIDE BY FLOW ANALYSIS (CFA AND FIA) AND PHOTOMETRIC OR POTENTIOMETRIC DETECTION |
17/30334458 DC : 0 | BS ISO 20920 - TEXTILES - MAN-MADE FIBRES - DETERMINATION OF DYE-UPTAKE OF CATIONIC DYEABLE MODIFIED POLYESTER FIBRES |
BS ISO 17710:2002 | Plastics. Polyols for use in the production of polyurethane. Determination of degree of unsaturation by microtitration |
16/30302161 DC : 0 | BS EN 1568-2 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 2: SPECIFICATION FOR HIGH EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
PD ISO/TS 16506:2017 | Dentistry. Polymer-based luting materials containing adhesive components |
12/30263288 DC : 0 | BS EN 15768 - GC-MS IDENTIFICATION OF WATER LEACHABLE ORGANIC SUBSTANCES FROM MATERIALS IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION |
BS EN 16866:2017 | Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
PD CEN/TS 17083:2017 | Foodstuffs. Determination of acrylamide in food and coffee by gas chromatography-mass spectrometry (GC-MS) |
BS EN ISO 16265:2012 | Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA) |
DIN ISO 29941:2014-12 | Condoms - Determination of nitrosamines migrating from natural rubber latex condoms (ISO 29941:2010) |
96/708572 DC : DRAFT JUN 1996 | ISO/CD 15349-2 - UNALLOYED STEEL - DETERMINATION OF LOW CARBON CONTENT - PART 2: INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE |
12/30218317 DC : DRAFT JAN 2012 | BS ISO 17379-1 - WATER QUALITY - DETERMINATION OF SELENIUM - PART 1: METHOD USING HYDRIDE GENERATION ATOMIC FLUORESCENCE SPECTROMETRY (HG-AFS) |
DIN EN 15850:2010-07 | Foodstuffs - Determination of zearalenone in maize based baby food, barley flour, maize flour, polenta, wheat flour and cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection |
BS ISO 3771:2011 | Petroleum products. Determination of base number. Perchloric acid potentiometric titration method |
BS EN ISO 3826-4:2015 | Plastics collapsible containers for human blood and blood components Aphaeresis blood bag systems with integrated features |
BS EN ISO 17304:2013 | Dentistry. Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials |
12/30268251 DC : 0 | BS EN 901 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYPOCHLORITE |
BS EN ISO 14362-1:2017 | Textiles. Methods for determination of certain aromatic amines derived from azo colorants Detection of the use of certain azo colorants accessible with and without extracting the fibres |
ISO 17947:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders |
DIN EN 15561:2009-06 | Fertilizers - Determination of total nitrogen in calcium cyanamide containing nitrates |
03/303614 DC : DRAFT MAR 2003 | BS ISO 15202-3 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY - PART 3: ANALYSIS |
DIN EN 15837:2010-04 | Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
DIN ISO 11262:2012-04 | Soil quality - Determination of total cyanide (ISO 11262:2011) |
UNE-EN ISO 27587:2010 | Leather - Chemical tests - Determination of the free formaldehyde in process auxiliaries (ISO 27587:2009) |
I.S. EN ISO 9696:2017 | WATER QUALITY - GROSS ALPHA ACTIVITY - TEST METHOD USING THICK SOURCE (ISO 9696:2017) |
UNE-EN 16075:2012 | Fertilizers - Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
13/30255962 DC : 0 | BS EN ISO 12228-1 - DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS |
BS EN ISO 8199:2007 | Water quality. General guidance on the enumeration of micro-organisms by culture |
BS EN ISO 648:2008 | Laboratory glassware. Single-volume pipettes |
DIN EN ISO 11260:2011-09 | SOIL QUALITY - DETERMINATION OF EFFECTIVE CATION EXCHANGE CAPACITY AND BASE SATURATION LEVEL USING BARIUM CHLORIDE SOLUTION |
BS 6068-2.63(1998) : 1998 | WATER QUALITY - DETERMINATION OF BIOCHEMICAL OXYGEN DEMAND AFTER N DAYS (BODN) - PART 1: DILUTION AND SEEDING METHOD WITH ALLYLTHIOUREA ADDITION |
BS EN 16711-2:2015 | Textiles. Determination of metal content Determination of metals extracted by acidic artificial perspiration solution |
BS 2000-163(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - LUBRICATING OILS AND ADDITIVES - DETERMINATION OF SULFATED ASH |
DIN EN 14362-3:2012-09 | TEXTILES - METHODS FOR THE DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 3: DETECTION OF THE USE OF CERTAIN AZO COLORANTS, WHICH MAY RELEASE 4-AMINOAZOBENZENE |
07/30164620 DC : 0 | BS EN 15692 - ETHANOL AS A BLENDING COMPONENT FOR GASOLINE - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
BS EN ISO 5814:2012 | Water quality. Determination of dissolved oxygen. Electrochemical probe method |
10/30212880 DC : 0 | BS ISO 27871 - CHEESE AND PROCESSED CHEESE - DETERMINATION OF THE NITROGENOUS FRACTIONS |
16/30329930 DC : 0 | BS EN ISO 6246 - PETROLEUM PRODUCTS - GUM CONTENT OF LIGHT AND MIDDLE DISTILLATE FUELS - JET EVAPORATION METHOD |
BS ISO 11534:2006 | Iron ores. Determination of tin. Flame atomic absorption spectrometric method |
DIN EN 15030:2015-05 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SILVER SALTS FOR INTERMITTENT USE |
ISO 17299-3:2014 | Textiles — Determination of deodorant property — Part 3: Gas chromatography method |
PREN 14176 : DRAFT 2015 | FOODSTUFFS - DETERMINATION OF DOMOIC ACID IN RAW SHELLFISH, RAW FINFISH AND COOKED MUSSELS BY RP-HPLC USING UV DETECTION |
17/30348890 DC : 0 | BS EN ISO 4531 - VITREOUS AND PORCELAIN ENAMELS - MIGRATION FROM ENAMELLED WARE IN CONTACT WITH FOOD - METHOD OF TEST AND PERMISSIBLE LIMITS |
DIN EN 16320:2013-12 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
03/309700 DC : DRAFT JULY 2003 | BS ISO 8199 - WATER QUALITY - GUIDE TO THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
DIN EN 15476:2009-04 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO DEVARDA |
ISO/TS 15923-2:2017 | Water quality — Determination of selected parameters by discrete analysis systems — Part 2: Chromium(VI), fluoride, total alkalinity, total hardness, calcium, magnesium, iron, iron(II), manganese and aluminium with photometric detection |
DIN EN ISO 17072-2:2011-06 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
DIN EN 15962:2011-04 | Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients |
NF EN ISO 5667-15 : 2009 | WATER QUALITY - SAMPLING - PART 15: GUIDANCE ON THE PRESERVATION AND HANDLING OF SLUDGE AND SEDIMENT SAMPLES |
96/711803 DC : DRAFT AUG 1996 | ISO/CD 13899 - STEEL AND NICKEL ALLOYS - DETERMINATION OF MOLYBDENUM - INDUCTIVELY COUPLED PLASMA EMISSION SPECTROMETRY METHOD |
16/30338111 DC : 0 | BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
NF ISO 6492 : 2011 | ANIMAL FEEDING STUFFS - DETERMINATION OF FAT CONTENT |
DIN EN ISO 12782-1:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid (ISO 12782-1:2012) |
DD CEN/TS 15411:2006 | Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
DIN EN 152:2012-02 | Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method |
ISO 17190-10:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 10: Determination of extractable polymer content by potentiometric titration |
14/30267877 DC : 0 | BS EN 16802 - FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - DETERMINATION OF INORGANIC ARSENIC IN FOODSTUFFS OF MARINE AND PLANT ORIGIN BY ANION-EXCHANGE HPLC-ICP-MS FOLLOWING WATERBATH EXTRACTION |
UNI CEN/TS 15750 : 2008 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN FERTILIZERS CONTAINING NITROGEN ONLY AS NITRIC, AMMONIACAL AND UREA NITROGEN BY TWO DIFFERENT METHODS |
DIN EN ISO 5402-2:2015-12 | LEATHER - DETERMINATION OF FLEX RESISTANCE - PART 2: VAMP FLEX METHOD (ISO 5402-2:2015) |
NF EN ISO 105 C06 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING |
DIN EN 16277:2012-09 | ANIMAL FEEDING STUFFS - DETERMINATION OF MERCURY BY COLD-VAPOUR ATOMIC ABSORPTION SPECTROMETRY (CVAAS) AFTER MICROWAVE PRESSURE DIGESTION (EXTRACTION WITH 65% NITRIC ACID AND 30% HYDROGEN PEROXIDE) |
DIN EN ISO 17489:2014-03 | Leather - Chemical tests - Determination of tan content in synthetic tanning agents (ISO 17489:2013) |
BS EN 16693:2015 | Water quality. Determination of organochlorine pesticides (OCP) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS) |
05/30106324 DC : DRAFT MAY 2005 | EN ISO 8192 - WATER QUALITY - TEST FOR INHIBITION OF OXYGEN CONSUMPTION BY ACTIVATED SLUDGE (CARBON AND AMMONIUM OXIDATION) |
11/30217195 DC : 0 | BS ISO 15923-1 - WATER QUALITY - DETERMINATION OF IONS BY A DISCRETE ANALYSIS SYSTEM AND SPECTROPHOTOMETRIC DETECTION - PART 1: AMMONIUM, CHLORIDE, NITRATE, NITRITE, ORTHOPHOSPHATE, SILICATE AND SULFATE |
BS ISO 14388-2:2014 | Soil quality. Acid-base accounting procedure for acid sulfate soils Chromium reducible sulfur (CRS) methodology |
BS EN 16169:2012 | Sludge, treated biowaste and soil. Determination of Kjeldahl nitrogen |
PD CEN/TS 16318:2012 | Fertilizers. Determination of trace elements. Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) |
ISO 16429:2004 | Implants for surgery — Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods |
11/30241791 DC : 0 | BS EN 62321-7-2 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 7-2: DETERMINATION OF HEXAVALENT CHROMIUM (CR(6)) IN POLYMERS AND ELECTRONICS BY THE COLOURIMETRIC METHOD |
NF EN ISO 105 E09 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING |
UNI EN 16173 : 2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DIGESTION OF NITRIC ACID SOLUBLE FRACTIONS OF ELEMENTS |
UNI EN 2434-003 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 003: FLEXIBLE AND HIGH FLUID RESISTANCE FOR INTERIOR |
15/30328769 DC : 0 | BS EN 13252 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS |
17/30366631 DC : 0 | BS ISO 15151 - MILK, MILK PRODUCTS, INFANT FORMULA AND ADULT NUTRITIONALS - DETERMINATION OF MINERALS AND TRACE ELEMENTS - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP-AES) METHOD |
BS EN ISO 8130-3:2010 | Coating powders Determination of density by liquid displacement pyknometer |
05/30085459 DC : DRAFT JAN 2005 | ISO 15912 - DENTISTRY - INVESTMENT MATERIALS |
BS ISO 11533:2009 | Iron ores. Determination of cobalt. Flame atomic absorption spectrometric method |
BS 2000-280(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND LUBRICANTS - INHIBITED MINERAL TURBINE OILS - DETERMINATION OF OXIDATION STABILITY |
BS EN ISO 5403-1:2011 | Leather. Determination of water resistance of flexible leather Repeated linear compression (penetrometer) |
DD ENV ISO 12960:2000 | Geotextiles and geotextile-related products. Screening test method for determining the resistance to liquids |
DIN EN 16357:2013-11 | Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid |
UNE-EN ISO 18857-2:2012 | Water quality - Determination of selected alkylphenols - Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation (ISO 18857-2:2009) |
I.S. EN 15479:2009 | FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
ISO 20289:2018 | Surface chemical analysis — Total reflection X-ray fluorescence analysis of water |
IP 41 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
BS EN 60754-2:2014 | Test on gases evolved during combustion of materials from cables Determination of acidity (by pH measurement) and conductivity |
96/711804 DC : DRAFT AUG 1996 | ISO/CD 15355 - STEEL AND IRON - DETERMINATION OF CHROMIUM CONTENT - INDIRECT TITRATION METHOD |
BS EN 16037:2012 | Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfate |
00/562034 DC : DRAFT MAY 2000 | ISO 17190-10 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 10: DETERMINATION OF EXTRACTABLE POLYMER CONTENT BY POTENTIOMETRIC TITRATION |
12/30258173 DC : 0 | BS EN 15030 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SILVER SALTS FOR INTERMITTENT USE |
I.S. CEN TR 15119:2005 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - ESTIMATION OF EMISSIONS FROM PRESERVATIVE TREATED WOOD TO THE ENVIRONMENT - WOOD HELD IN THE STORAGE YARD AFTER TREATMENT AND WOODEN COMMODITIES EXPOSED IN USE CLASS 3 (NOT COVERED, NOT IN CONTACT WITH THE GROUND), AND WOODEN COMMODITIES EXPOSED IN USE CLASS 4 OR 5 (IN CONTACT WITH THE GROUND, FRESH WATER OR SEA WATER) - LABORATORY |
BS EN ISO 12782-4:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of humic substances from solid samples |
02/122469 DC : DRAFT JUN 2002 | BS EN 14480 - SURFACE ACTIVE AGENTS - DETERMINATION OF ANIONIC SURFACE ACTIVE AGENTS - POTENTIOMETRIC TWO-PHASE TITRATION METHOD |
I.S. EN 16568:2014 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
BS EN 17050:2017 | Animal feeding stuffs: Methods of sampling and analysis. Determination of iodine in animal feed by ICP-MS |
PD CEN/TS 15119-2:2012 | Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water). Laboratory method |
UNE-EN ISO 4829-2:2016 | Steels - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 2: Silicon contents between 0,01 % and 0,05 % (ISO 4829-2:2016) |
BIS IS 16041 : 2012 | TEA - DETERMINATION OF CRUDE FIBRE CONTENT |
ISO 10390:2005 | Soil quality Determination of pH |
14/30287137 DC : 0 | BS ISO 4630 - CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE |
IEC 60754-3:2018 | Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography |
03/307372 DC : DRAFT MAY 2003 | BS EN 118 - WOOD PRESERVATIVES - DETERMINATION OF PREVENTIVE ACTION AGAINST EUROPEAN RETICULITERMES SPECIES (LABORATORY METHOD) |
BS 3900-B9:1986 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Determination of \'soluble\' cadmium content |
PREN 13251 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES |
PREN 1568-2 : DRAFT 2016 | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 2: SPECIFICATION FOR HIGH EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
DIN EN ISO 4920:2012-12 | TEXTILE FABRICS - DETERMINATION OF RESISTANCE TO SURFACE WETTING (SPRAY TEST) (ISO 4920:2012) |
BS ISO 10203:2017 | Iron ores. Determination of calcium. Flame atomic absorption spectrometric method |
12/30218311 DC : 0 | BS ISO 17378-2 - WATER QUALITY - DETERMINATION OF ARSENIC AND ANTIMONY - PART 2: METHOD USING HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HG-AAS) |
BS DD207(1992) : 1992 | METHOD OF TEST FOR SOLUBLE IRON CORROSION PRODUCTS TO ASSESS SURFACE CLEANLINESS OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS |
BS ISO 17858:2007 | Water quality. Determination of dioxin-like polychlorinated Biphenyls. Method using gas-chromatography/mass spectrometry |
BS EN 16923:2017 | Foodstuffs. Determination of T-2 toxin and HT-2 toxin in cereals and cereal products for infants and young children by LC-MS/MS after SPE cleanup |
16/30317161 DC : 0 | BS EN ISO 4829-1 - STEEL AND CAST IRON - DETERMINATION OF TOTAL SILICON CONTENTS - REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD - PART 1: SILICON CONTENTS BETWEEN 0,05% AND 1,0% |
BS EN 15704:2008 | Liming materials. Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water |
DIN EN 16328:2013-02 | Fertilizers - Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP) - Method using high-performance liquid chromatography (HPLC) |
09/30168805 DC : 0 | BS EN ISO 3107 - DENTISTRY - ZINC OXIDE/EUGENOL CEMENTS AND ZINC OXIDE/NON-EUGENOL CEMENTS |
15/30319011 DC : DRAFT APR 2015 | BS EN 14582 - CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
BS EN ISO 1248:2008 | Iron oxide pigments. Specifications and methods of test |
BS EN 15479:2009 | Fertilizers. Spectrophotometric determination of biuret in urea |
UNI CEN/TS 15749 : 2008 | FERTILIZERS - DETERMINATION OF SULFATES CONTENT USING THREE DIFFERENT METHODS |
DD CEN/TS 15475:2006 | Fertilizers. Determination of ammoniacal nitrogen |
NF EN ISO 10416 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
16/30330773 DC : 0 | BS EN 16962 - FERTILIZERS - EXTRACTION OF WATER SOLUBLE MICRO-NUTRIENTS IN FERTILIZERS AND REMOVAL OF ORGANIC COMPOUNDS FROM FERTILIZER EXTRACTS |
13/30283694 DC : 0 | BS EN ISO 1135-5 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS |
UNE-EN 16086-2:2012 | Soil improvers and growing media - Determination of plant response - Part 2: Petri dish test using cress |
PD ISO/TS 11405:2015 | Dentistry. Testing of adhesion to tooth structure |
16/30291024 DC : 0 | BS ISO 21484 - NUCLEAR ENERGY - FUEL TECHNOLOGY - DETERMINATION OF THE O/M RATIO IN MOX PELLETS BY THE GRAVIMETRIC METHOD |
BS 6200-3.31.3:2002 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tin Flame atomic absorption spectrometric method (extraction as Sn-SCN) |
04/30090408 DC : DRAFT FEB 2004 | ISO 13899-2 - STEEL - DETERMINATION OF MO, NB AND W CONTENTS IN ALLOYED STEEL - ICP-AES METHOD |
03/306726 DC : DRAFT MAY 2003 | EN 14670 - SURFACE ACTIVE AGENTS - SODIUM DODECYL SULFATE - ANALYSIS METHOD |
BS EN 16173:2012 | Sludge, treated biowaste and soil. Digestion of nitric acid soluble fractions of elements |
ISO 22033:2011 | Nickel alloys Determination of niobium Inductively coupled plasma/atomic emission spectrometric method |
08/30179313 DC : DRAFT MAY 2008 | BS EN 15479 - FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
07/30159408 DC : 0 | BS ISO 6495-1 - ANIMAL FEEDING STUFFS - DETERMINATION OF WATER-SOLUBLE CHLORIDES CONTENT - PART 1: TITRIMETRIC METHOD |
03/307375 DC : DRAFT MAY 2003 | EN 46-1 - WOOD PRESERVATIVES - DETERMINATION OF THE PREVENTIVE ACTION AGAINST RECENTLY HATCHED LARVAE OF HYLOTRUPES BAJULUS (LINNAEUS) - PART 1: APPLICATION BY SURFACE TREATMENT (LABORATORY METHOD) |
06/30160122 DC : 0 | ISO/DIS 26603 - PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF TOTAL CHLORINE |
17/30360611 DC : 0 | BS EN ISO 5398-1 - LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 1: QUANTIFICATION BY TITRATION |
13/30278599 DC : 0 | BS ISO 15819 - COSMETICS - ANALYTICAL METHODS - NITROSAMINES: DETECTION AND DETERMINATION OF N-NITROSODIETHANOLAMINE (NDELA) IN COSMETICS BY HPLC-MS-MS |
BS EN 16811-2:2016 | Winter service equipment and products. De-icing agents Calcium chloride and Magnesium chloride. Requirements and test methods |
DIN EN 16715:2015-10 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
16/30339666 DC : 0 | BS EN ISO 11609 - DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING |
API 13I : 2009 : R2016 | RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS |
DIN EN 16166:2012-11 | Sludge, treated biowaste and soil - Determination of adsorbable organically bound halogens (AOX) |
16/30338120 DC : 0 | BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
UNE-EN 16204:2012 | Foodstuffs - Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS |
08/30168864 DC : DRAFT MAY 2008 | BS ISO 20795-2 - DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS |
BS ISO 11349:2010 | Water quality. Determination of low-volatility lipophilic substances. Gravimetric method |
16/30328584 DC : 0 | BS ISO 19699-1 - PLASTICS - SUPERABSORBENT POLYMER - SODIUM POLYACRYLATE RESIN FOR ABSORBING BLOOD - PART 1: TEST METHODS |
BS ISO 13163:2013 | Water quality. Lead-210. Test method using liquid scintillation counting |
BS 6057-3.25:1997 | Rubber latices. Methods of test Determination of alkalinity for polychloroprene latex |
10/30203575 DC : 0 | BS EN ISO 5403-1 - LEATHER - DETERMINATION OF WATER RESISTANCE OF FLEXIBLE LEATHER - PART 1: REPEATED LINEAR COMPRESSION (PENETROMETER) |
16/30302167 DC : 0 | BS EN 1568-4 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 4: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-MISCIBLE LIQUIDS |
BS EN ISO 19250:2013 | Water quality. Detection of Salmonella spp. |
17/30292003 DC : 0 | BS ISO 19040-1 - WATER QUALITY - DETERMINATION OF THE ESTROGENIC POTENTIAL OF WATER AND WASTE WATER - PART 1: YEAST ESTROGEN SCREEN (SACCHAROMYCES CEREVISIAE) |
BS EN 15647:2009 | Surface active agents. Determination of the dispersing effect of surfactants on powder |
03/305240 DC : 0 | BS ISO 16429 - IMPLANTS FOR SURGERY - LONG-TERM MEASUREMENTS OF OPEN-CIRCUIT POTENTIAL TO ASSESS CORROSION BEHAVIOUR OF METALLIC IMPLANTABLE MATERIALS AND MEDICAL DEVICES |
BS ISO 13313:2017 | Iron ores. Determination of sodium. Flame atomic absorption spectrometric method |
BS ISO 14189 : 2013 | WATER QUALITY - ENUMERATION OF CLOSTRIDIUM PERFRINGENS - METHOD USING MEMBRANE FILTRATION |
BS ISO 28641:2010 | Rubber compounding ingredients. Organic chemicals. General test methods |
99/561486 DC : DRAFT FEB 99 | BS ISO 11262 - SOIL QUALITY - DETERMINATION OF CYANIDE |
BS EN ISO 25619-1:2008 | Geosynthetics. Determination of compression behaviour Compressive creep properties |
09/30198689 DC : 0 | BS EN 46-2 - WOOD PRESERVATIVES - DETERMINATION OF THE PREVENTIVE ACTION AGAINST HYLOTRUPES BAJULUS (LINNAEUS) - PART 2: OVICIDAL EFFECT (LABORATORY METHOD) |
BS EN 16319 : 2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
15/30266279 DC : 0 | BS EN ISO 11731 - WATER QUALITY - ENUMERATION OF LEGIONELLA |
DIN EN 16174:2012-11 | Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements |
10/30197647 DC : 0 | BS ISO 7203-3 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 3: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR TOP APPLICATION TO WATER-MISCIBLE LIQUIDS |
BS ISO 105-C08 : 2001 AMD 14165 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR |
BS ISO 15329 : 2006 | CORROSION OF METALS AND ALLOYS - ANODIC TEST FOR EVALUATION OF INTERGRANULAR CORROSION SUSCEPTIBILITY OF HEAT-TREATABLE ALUMINIUM ALLOYS |
BS ISO 11997-1 : 2005 AMD 16875 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
PREN 13752 : DRAFT 2010 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - MANGANESE DIOXIDE |
ISO 22662:2007 | Milk and milk products — Determination of lactose content by high-performance liquid chromatography (Reference method) |
PREN 12822 : DRAFT 2012 | FOODSTUFFS - DETERMINATION OF VITAMIN E BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MEASUREMENT OF ALFA-, BETA-, GAMMA- AND DELTA- TOCOPHEROLS |
BS EN 15652:2009 | Foodstuffs. Determination of niacin by HPLC |
BS ISO 26603:2017 | Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of total chlorine |
17/30319457 DC : 0 | BS EN ISO 11260 - SOIL QUALITY - DETERMINATION OF EFFECTIVE CATION EXCHANGE CAPACITY AND BASE SATURATION LEVEL USING BARIUM CHLORIDE SOLUTION |
03/313975 DC : DRAFT NOV 2003 | EN 1202 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - DIPOTASSIUM HYDROGEN ORTHOPHOSPHATE |
BS 2000-498(2014) : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
I.S. EN ISO 3826-4:2015 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 4: APHAERESIS BLOOD BAG SYSTEMS WITH INTEGRATED FEATURES (ISO 3826-4:2015) |
BS ISO 14378:2009 | Milk and dried milk. Determination of iodide content. Method using high-performance liquid chromatography |
09/30198858 DC : 0 | BS ISO 5794-1:2005/DAMD 1 - RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 1: NON-RUBBER TESTS |
BS EN 14166:2009 | Foodstuffs. Determination of vitamin B6 by microbiological assay |
BS ISO 13164-4:2015 | Water quality. Radon-222 Test method using two-phase liquid scintillation counting |
BS EN 14944-3:2007 | Influence of cementitious products on water intended for human consumption. Test methods Migration of substances from factory-made cementitious products |
BS EN 15692:2009 | Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method |
PREN 12596 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY BY VACUUM CAPILLARY |
BS ISO 17733:2004 | Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
BS ISO 10705-3:2003 | Water quality. Detection and enumeration of bacteriophages Validation of methods for concentration of bacteriophages from water |
16/30330779 DC : 0 | BS EN 16964 - FERTILIZERS - EXTRACTION OF TOTAL MICRO-NUTRIENTS IN FERTILIZERS AND REMOVAL OF ORGANIC COMPOUNDS FROM FERTILIZER EXTRACTS |
09/30178946 DC : 0 | BS ISO 4802-1 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
PREN 15482 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM PERMANGANATE |
I.S. EN ISO 5398-4:2007 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 4: QUANTIFICATION BY INDUCTIVELY COUPLED PLASMA - OPTICAL EMISSION SPECTROMETER (ICP-OES) |
ISO 18066:2015 | Textiles Manmade filament yarns Determination of shrinkage in boiling water |
08/30180711 DC : DRAFT APR 2008 | BS EN 60754-2 - TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 2: DETERMINATION OF ACIDITY (BY PH MEASUREMENT) AND CONDUCTIVITY |
CEI EN 60754-1 : 2015 | TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 1: DETERMINATION OF THE HALOGEN ACID GAS CONTENT |
AAMI ID26 : 2004 : R2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
BS EN 15041:2014 | Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polyphosphates |
BS 4401-17:1998 | Methods of test for meat and meat products Determination of chloramphenicol content (liquid chromatographic method) |
UNE-EN 1911:2011 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
I.S. EN ISO 28888:2013 | DENTISTRY - SCREENING METHOD FOR EROSION POTENTIAL OF ORAL RINSES ON DENTAL HARD TISSUES (ISO 28888:2013) |
BS 3900-K2(2001) : 2001 AMD 15246 | METHODS OF TEST FOR PAINTS - GROUP K: DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART K2: DETERMINATION OF COPPER-ION CONCENTRATION IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
BS EN ISO 4098:2006 | Leather. Chemical tests. Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter |
06/30065723 DC : DRAFT JUN 2006 | ISO 10321 - GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH METHOD |
UNE-EN 10361:2016 | Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method |
PREN 13138-2 : DRAFT 2012 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
PREN 2434-4 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 04: HIGH FLEXIBILITY |
07/30161361 DC : 0 | BS ISO 22634 - CIGARETTES - DETERMINATION OF BENZO(A)PYRENE IN CIGARETTE MAINSTREAM SMOKE - METHOD USING GAS CHROMATOGRAPHY/MASS SPECTROMETRY |
BS EN 15478:2009 | Fertilizers. Determination of total nitrogen in urea |
BS EN 15040:2014 | Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Phosphonic acids and salts |
BS 6782-14.3(2000) : 2000 AMD 10885 | BINDERS FOR PAINTS AND VARNISHES - PART 14 - METHODS OF TEST FOR ALKYD RESINS - SECTION 14.3 - DETERMINATION OF UNSAPONIFIABLE MATTER CONTENT |
BS 5766-20(2000) : 2000 | ANIMAL FEEDING STUFFS - DETERMINATION OF RESIDUES OF ORGANOPHOSPHORUS PESTICIDES - GAS CHROMATOGRAPHIC METHOD |
BS ISO 4404:1998 | Petroleum and related products. Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems |
BS EN 15769:2009 | Ethanol as a blending component of petrol. Determination of appearance. Visual method |
05/30046519 DC : 0 | ISO 2596 - IRON ORES - DETERMINATION OF HYGROSCOPIC MOISTURE IN ANALYTICAL SAMPLES - GRAVIMETRIC, KARL FISCHER AND MASS-LOSS METHODS |
ISO 25761:2014 | Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen |
UNI ISO 976 : 2014 | RUBBER AND PLASTICS - POLYMER DISPERSIONS AND RUBBER LATICES - DETERMINATION OF PH |
I.S. EN ISO 13160:2015 | WATER QUALITY - STRONTIUM 90 AND STRONTIUM 89 - TEST METHODS USING LIQUID SCINTILLATION COUNTING OR PROPORTIONAL COUNTING (ISO 13160:2012) |
04/301210 DC : DRAFT JAN 2004 | ISO 15634 - IRON ORES - DETERMINATION OF CHROMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
UNI EN ISO 27108 : 2013 | WATER QUALITY - DETERMINATION OF SELECTED PLANT TREATMENT AGENTS AND BIOCIDE PRODUCTS - METHOD USING SOLID-PHASE MICROEXTRACTION (SPME) FOLLOWED BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
ISO 12795:2004 | Nuclear fuel technology Uranium dioxide powder and pellets Determination of uranium and oxygen/uranium ratio by gravimetric method with impurity correction |
UNE-EN ISO 11702:2016 | Animal and vegetable fats and oils - Enzymatic determination of total sterols content (ISO 11702:2016) |
DD CEN/TS 15604:2007 | Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen |
08/30188440 DC : 0 | BS EN 1911 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF GASEOUS CHLORIDES EXPRESSED AS HCL - STANDARD REFERENCE METHOD |
BS ISO 14154:2005 | Soil quality. Determination of some selected chlorophenols. Gas-chromatographic method with electron-capture detection |
IP PM DB : 2005 | DETERMINATION OF RUST PREVENTION CHARACTERISTICS OF PAPERMAKING MACHINE OILS IN THE PRESENCE OF AQUEOUS TEST FLUIDS |
BS EN 15721:2013 | Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method |
03/103488 DC : DRAFT FEB 2003 | BS EN 14621 - TEXTILES - MULTIFILAMENT YARNS - METHODS OF TEST |
BS ISO 14377:2002 | Canned evaporated milk. Determination of tin content. Method using graphite furnace atomic absorption spectrometry |
04/30127160 DC : DRAFT DEC 2004 | ISO 6885 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ANISIDINE VALUE |
BS EN 15608:2008 | Surface active agents. Quantitative determination of free fatty acid in alkylamidopropylbetaines. Gas- chromatographic method |
06/30148736 DC : 0 | EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
05/30133266 DC : DRAFT MAY 2005 | BS EN 15192 - CHARACTERISATION OF WASTE AND SOIL - DETERMINATION OF HEXAVALENT CHROMIUM IN SOLID MATERIAL BY ALKALINE DIGESTION AND ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION - COMPLEMENTARY ELEMENT |
I.S. EN 16206:2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF ARSENIC BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HGAAS) AFTER MICROWAVE PRESSURE DIGESTION (DIGESTION WITH 65% NITRIC ACID AND 30% HYDROGEN PEROXIDE) |
BS 2000-130(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF BROMINE NUMBER OF DISTILLATES AND ALIPHATIC OLEFINS - ELECTROMETRIC METHOD |
16/30338126 DC : 0 | BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
UNI EN ISO 16373-3 : 2014 | TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARCINOGENIC DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) |
UNI CEN ISO/TS 16189 : 2013 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO QUANTITATIVELY DETERMINE DIMETHYLFORMAMIDE IN FOOTWEAR MATERIALS |
PREN 896 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYDROXIDE |
PREN 1243 : DRAFT 2010 | ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
I.S. ENV 13800:2000 | LEAD AND LEAD ALLOYS - ANALYSIS BY FLAME ATOMIC ABSORPTION SPECTROMETRY (FAAS) OR INDUCTIVELY COUPLED PLASMA EMISSION SPECTROMETRY (ICP-ES), WITHOUT SEPARATION OF THE LEAD MATRIX |
CSA Z5100/Z5200 PACKAGE : 2017 | CONSISTS OF Z5100-17, CELLULOSE NANOMATERIALS - TEST METHODS FOR CHARACTERIZATION AND Z5200-17, CELLULOSE NANOMATERIALS - BLANK DETAIL SPECIFICATION |
UNI EN ISO 14254 : 2011 | SOIL QUALITY - DETERMINATION OF EXCHANGEABLE ACIDITY IN BARIUM CHLORIDE EXTRACTS |
UNI EN ISO 11127-3 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 3: DETERMINATION OF APPARENT DENSITY |
I.S. EN 16802:2016 | FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - DETERMINATION OF INORGANIC ARSENIC IN FOODSTUFFS OF MARINE AND PLANT ORIGIN BY ANION-EXCHANGE HPLC-ICP-MS |
UNE-EN ISO 17234-1:2015 | Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 1: Determination of certain aromatic amines derived from azo colorants (ISO 17234-1:2015) |
ISO 13312:2017 | Iron ores Determination of potassium Flame atomic absorption spectrometric method |
I.S. EN 15909:2010 | FERTILIZERS - DETERMINATION OF CALCIUM AND FORMATE IN CALCIUM FOLIAR FERTILIZERS |
S.R. CEN/TS 16317:2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
DIN EN 16418 E : 2014 | PAPER AND BOARD - DETERMINATION OF THE CYTOTOXICITY OF AQUEOUS EXTRACTS USING A METABOLICALLY COMPETENT HEPATOMA CELL LINE (HEPG2) |
I.S. EN ISO 6271:2015 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT COLOUR SCALE (ISO 6271:2015) |
DIN EN 16421:2015-05 | INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
DIN EN ISO 18218-1:2015-11 | Leather - Determination of ethoxylated alkylphenols - Part 1: Direct method (ISO 18218-1:2015) |
DIN 10762:2004-06 | Analysis of honey - Determination of ethanol content - Enzymatic method |
UNI EN 15621 : 2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
PREN 2436-1 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 01: BASIC REQUIREMENTS |
DIN EN ISO 10270:2011-09 | Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995+Cor. 1:1997) |
PREN 2436-3 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 03: HIGH CORROSION AND FLUID RESISTANCE |
NF ISO 6493 : 2011 | ANIMAL FEEDING STUFFS - DETERMINATION OF STARCH CONTENT - POLARIMETRIC METHOD |
UNI EN 15905 : 2010 | FERTILIZERS - DETERMINATION OF 3-METHYLPYRAZOLE (MP) USING HIGH- PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
UNI EN ISO 17071 : 2011 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FOGGING CHARACTERISTICS |
PREN 2434-2 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 02: HIGH CHEMICAL RESISTANCE |
PREN 6059-305 : 200P2 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 305: FLUID ABSORPTION |
PREN 4170 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR MEASUREMENT OF RESISTANCE TO COLD CRACK TEMPERATURE CYCLE |
PREN 4195 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF CHROMATE LEACHING |
PREN 4476 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
I.S. ENV 14138:2002 | LEAD AND LEAD ALLOYS - ANALYSIS BY FLAME ATOMIC ABSORPTION SPECTROMETRY (FAAS) OR INDUCTIVELY COUPLED PLASMA EMISSION SPECTROMETRY (ICP-ES), AFTER SEPARATION BY CO-PRECIPITATION |
ISO 11007:1997 | Petroleum products and lubricants Determination of rust-prevention characteristics of lubricating greases |
I.S. EN ISO 17072-1:2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
I.S. EN 10355:2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD] |
I.S. EN ISO 28399:2011 | DENTISTRY - PRODUCTS FOR EXTERNAL TOOTH BLEACHING |
UNI EN 16087-1 : 2012 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF THE AEROBIC BIOLOGICAL ACTIVITY - PART 1: OXYGEN UPTAKE RATE (OUR) |
BS ISO 18184:2014 | Textiles. Determination of antiviral activity of textile products |
S.R. CEN/TS 14418:2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF FREEZING-THAWING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
UNI EN ISO 439 : 2010 | STEEL AND IRON - DETERMINATION OF TOTAL SILICON CONTENT - GRAVIMETRIC METHOD |
I.S. EN 16711-2:2015 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
UNI EN 16421 : 2015 | INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
UNE-EN 15782:2010 | Animal feeding stuffs - Determination of nicarbazin - High-performance liquid chromatographic method |
PREN 901 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYPOCHLORITE |
ISO 15038:1999 | Plastics Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials Determination of active-oxygen content |
BS 2000-377(1995) : 1995 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF ALUMINIUM AND SILICON IN FUEL OILS - INDUCTIVELY COUPLED PLASMA EMISSION AND ATOMIC ABSORPTION SPECTROSCOPY METHODS |
EN ISO 8130-3:2010 | Coating powders - Part 3: Determination of density by liquid displacement pyknometer (ISO 8130-3:1992) |
EN ISO 23161:2011 | Soil quality - Determination of selected organotin compounds - Gas-chromatographic method (ISO 23161:2009) |
UNI EN 15604 : 2009 | FERTILIZERS - DETERMINATION OF DIFFERENT FORMS OF NITROGEN IN THE SAME SAMPLE, CONTAINING NITROGEN AS NITRIC, AMMONIACAL, UREA AND CYANAMIDE NITROGEN |
I.S. EN ISO 12782-2:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 2: EXTRACTION OF CRYSTALLINE IRON OXIDES AND HYDROXIDES WITH DITHIONITE (ISO 12782-2:2012) |
NF ISO 15192 : 2011 | SOIL QUALITY - DETERMINATION OF CHROMIUM(6) IN SOLID MATERIAL BY ALKALINE DIGESTION AND ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION |
I.S. EN ISO 4946:2016 | STEEL AND CAST IRON - DETERMINATION OF COPPER - 2,2'-BIQUINOLINE SPECTROPHOTOMETRIC METHOD (ISO 4946:2016) |
UNI EN 4159 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO MICROBIAL GROWTH |
ISO 4942:2016 | Steels and irons Determination of vanadium content N-BPHA spectrophotometric method |
NFS 94 402-1 : 2004 | EXAMINATION OF THE CORROSIVE EFFECT OF A DECONTAMINANT, CLEANING AGENT OR DISINFECTANT ON REUSABLE MEDICO-SURGICAL INSTRUMENTS - TEST METHODS - PART 1: STAINLESS STEEL |
18/30346454 DC : 0 | BS ISO 21832 - WORKPLACE AIR - PROCEDURES FOR DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICLES |
I.S. EN 15721:2013 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
DIN EN ISO 5398-3:2007-10 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 3: QUANTIFICATION BY ATOMIC ABSORPTION SPECTROMETRY |
I.S. EN ISO 12782-3:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 3: EXTRACTION OF ALUMINIUM OXIDES AND HYDROXIDES WITH AMMONIUM OXALATE/OXALIC ACID (ISO 12782-3:2012) |
UNE-EN ISO 17231:2017 | Leather - Physical and mechanical tests - Determination of water repellency of garment leather (ISO 17231:2017) |
I.S. EN ISO 4829-1:2018 | STEEL AND CAST IRON - DETERMINATION OF TOTAL SILICON CONTENTS - REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD - PART 1: SILICON CONTENTS BETWEEN 0,05% AND 1,0% (ISO 4829-1:2018) |
UNE-EN ISO 14088:2012 | Leather - Chemical tests - Quantitative analysis of tanning agents by filter method (ISO 14088:2012) |
ISO 2745:1998 | Vitreous and porcelain enamels Determination of resistance to hot sodium hydroxide |
IP PM EJ : 2014 | DETERMINATION OF KINEMATIC VISCOSITY OF AVIATION TURBINE FUELS - MANUAL AND AUTOMATED METHOD |
BS 2000-373(2010) : 2010 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD |
I.S. EN 15782:2009 | ANIMAL FEEDING STUFFS - DETERMINATION OF NICARBAZIN - HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
BS 2000-574(2009) : 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
UNI EN 15782 : 2009 | ANIMAL FEEDING STUFFS - DETERMINATION OF NICARBAZIN - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
ISO 17190-11:2001 | Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 11: Determination of content of respirable particles |
BIS IS/ISO 4787 : 2010 | LABORATORY GLASSWARE - VOLUMETRIC INSTRUMENTS - METHODS FOR TESTING OF CAPACITY AND FOR USE |
I.S. EN 16070:2014 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - NATURAL ZEOLITE |
BIS IS 15060 : 2001(R2006) | GEOTEXTILES - TENSILE TEST FOR JOINT/SEAMS BY WIDE-WIDTH METHOD |
I.S. EN ISO 9073-12:2005 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 12: DEMAND ABSORBENCY |
I.S. EN 16170:2016 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ELEMENTS USING INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
S.R. CEN/TS 16177:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - EXTRACTION FOR THE DETERMINATION OF EXTRACTABLE AMMONIA, NITRATE AND NITRITE |
I.S. ISO 3856-5:1988 | PAINTS AND VARNISHES - DETERMINATION OF "SOLUBLE" METAL CONTENT - PART 5: DETERMINATION OF HEXAVALENT CHROMIUM CONTENT OF THE PIGMENT PORTION OF THE LIQUID PAINT OR THE PAINT IN POWDER FORM - DIPHENYLCARBAZIDE SPECTROPHOTOMETRIC METHOD |
I.S. EN 62321-5:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 5: CADMIUM, LEAD AND CHROMIUM IN POLYMERS AND ELECTRONICS AND CADMIUM AND LEAD IN METALS BY AAS, AFS, ICP-OES AND ICP-MS |
I.S. EN 62321-7-1:2015 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 7-1: DETERMINATION OF THE PRESENCE OF HEXAVALENT CHROMIUM (CR(6)) IN COLORLESS AND COLORED CORROSION-PROTECTED COATINGS ON METALS BY THE COLORIMETRIC METHOD |
BS EN 15626:2009 | Bitumen and bituminous binders. Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test. Aggregate method |
I.S. EN 4171:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF PHOSPHORIC ACID INDEX |
S.R. CEN/TS 16320:2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
UNE-EN ISO 17489:2014 | Leather - Chemical tests - Determination of tan content in synthetic tanning agents (ISO 17489:2013) |
ISO 22682:2017 | Iron ores — Determination of trace elements — Plasma spectrometric method |
I.S. EN ISO 12966-2:2017 | ANIMAL AND VEGETABLE FATS AND OILS - GAS CHROMATOGRAPHY OF FATTY ACID METHYL ESTERS - PART 2: PREPARATION OF METHYL ESTERS OF FATTY ACIDS (ISO 12966-2:2017) |
ISO 19242:2015 | Rubber Determination of total sulfur content by ion chromatography |
BIS IS 2303-1-2 : 2012(R2017) | GRADING GLASS - PART 1: METHOD OF TEST AND CLASSIFICATION - SECTION 2: HYDROLYTIC RESISTANCE OF GLASS GRAINS AT 121 DEGREES C |
I.S. EN 50642:2018 | CABLE MANAGEMENT SYSTEMS - TEST METHOD FOR CONTENT OF HALOGENS |
I.S. EN 15851:2010 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
S.R. CEN TS 839:2008 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST WOOD DESTROYING BASIDIOMYCETES - APPLICATION BY SURFACE TREATMENT |
I.S. EN ISO 2812-5:2007 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
ONORM EN ISO 25619-1 : 2009 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 1: COMPRESSIVE CREEP PROPERTIES |
I.S. EN ISO 28706-5:2011 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 5: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION IN CLOSED SYSTEMS |
UNE-EN 16087-1:2012 | Soil improvers and growing media - Determination of the aerobic biological activity - Part 1: Oxygen uptake rate (OUR) |
UNE-EN ISO 8130-3:2011 | Coating powders - Part 3: Determination of density by liquid displacement pyknometer (ISO 8130-3:1992) |
UNE-EN ISO 28723:2011 | Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers (ISO 28723:2008) |
I.S. CEN ISO TS 17764-2:2006 | ANIMAL FEEDING STUFFS - DETERMINATION OF THE CONTENT OF FATTY ACIDS - PART 2: GAS CHROMATOGRAPHIC METHOD |
EN ISO 12870:2018 | Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2016) |
ISO 4619:1998 | Driers for paints and varnishes |
BS 2000-163(2010) : 2010 | PETROLEUM PRODUCTS - DETERMINATION OF SULFATED ASH IN LUBRICATING OILS AND ADDITIVES |
BS 2000-342(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF THIOL (MERCAPTAN) SULFUR IN LIGHT AND MIDDLE DISTILLATE FUELS - POTENTIOMETRIC METHOD |
ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
I.S. EN ISO 12782-1:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 1: EXTRACTION OF AMORPHOUS IRON OXIDES AND HYDROXIDES WITH ASCORBIC ACID (ISO 12782-1:2012) |
I.S. EN 16318:2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CHROMIUM(6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
UNE-EN ISO 15234:2011 | Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999) |
I.S. EN ISO 20795-1:2013 | DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS (ISO 20795-1:2013) |
I.S. EN 16923:2017 | FOODSTUFFS - DETERMINATION OF T-2 TOXIN AND HT-2 TOXIN IN CEREALS AND CEREAL PRODUCTS FOR INFANTS AND YOUNG CHILDREN BY LC-MS/MS AFTER SPE CLEANUP |
I.S. EN 16175-2:2016 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF MERCURY - PART 2: COLD-VAPOUR ATOMIC FLUORESCENCE SPECTROMETRY (CV-AFS) |
UNE 81550:2017 | Workplace exposure. Determination of crystalline free silica (respirable fractions) in the air. Method by infrared spectrometry |
ISO 11652:1997 | Steel and iron Determination of cobalt content Flame atomic absorption spectrometric method |
UNE-EN ISO 16050:2011 | Foodstuffs - Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products - High-performance liquid chromatographic method (ISO 16050:2003) |
UNE-ISO 976:2017 | Rubber and plastics. Polymer dispersions and rubber lattices. Determination of pH |
ISO 13651:1996 | Plastics Epoxy resins and related materials Determination of total saponifiable chlorine |
ISO 2812-3:2012 | Paints and varnishes Determination of resistance to liquids Part 3: Method using an absorbent medium |
ISO 15373:2001 | Plastics — Polymer dispersions — Determination of free formaldehyde |
I.S. EN ISO 4920:2012 | TEXTILE FABRICS - DETERMINATION OF RESISTANCE TO SURFACE WETTING (SPRAY TEST) (ISO 4920:2012) |
UNI EN 15688 : 2008 | FERTILIZERS - DETERMINATION OF UREASE INHIBITOR N-(N-BUTYL)THIOPHOSPHORIC TRIAMIDE (NBPT) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
ISO 10701:1994 | Steel and iron — Determination of sulfur content — Methylene blue spectrophotometric method |
ASTM D 7873 : 2013 : EDT 1 | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120°C Without the Inclusion of Water (Dry TOST Method) |
I.S. EN ISO 16187:2013 | FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO ASSESS ANTIBACTERIAL ACTIVITY (ISO 16187:2013) |
I.S. EN ISO 16198:2015 | SOIL QUALITY - PLANT-BASED TEST TO ASSESS THE ENVIRONMENTAL BIOAVAILABILITY OF TRACE ELEMENTS TO PLANTS (ISO 16198:2015) |
S.R. CEN/TS 16175-1:2013 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF MERCURY - PART 1: COLD-VAPOUR ATOMIC ABSORPTION SPECTROMETRY (CV-AAS) |
I.S. EN ISO 4787:2011 | LABORATORY GLASSWARE - VOLUMETRIC INSTRUMENTS - METHODS FOR TESTING OF CAPACITY AND FOR USE |
I.S. EN 16169:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF KJELDAHL NITROGEN |
I.S. EN ISO 17730:2014 | DENTISTRY - FLUORIDE VARNISHES (ISO 17730:2014) |
ISO 13311:1997 | Iron ores — Determination of lead content — Flame atomic absorption spectrometric method |
ISO 28706-3:2017 | Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle |
I.S. EN 15649-1:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
DIN EN ISO 9308-1:2014-12 | WATER QUALITY - ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL BACKGROUND FLORA (ISO 9308-1:2014 + AMD 1:2016) |
ISO 15598:1999 | Tea Determination of crude fibre content |
ISO 13933:2014 | Steel and iron — Determination of calcium and magnesium — Inductively coupled plasma atomic emission spectrometric method |
ISO 27085:2009 | Animal feeding stuffs Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES |
EN ISO 7783:2011 | Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011) |
IP PM CW : 2004 | DETERMINATION OF LOW LEVEL METALLIC ELEMENTS IN VACUUM GAS OIL/WAXY DISTILLATES AND CRUDE OILS - FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY (AAS) OR INDUCTIVELY COUPLED PLASMA-EMISSION SPECTROPHOTOMETRY (ICP-ES) METHOD |
BS 2000-459.1(2015) : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 1: METHOD BY DISTILLATION |
ISO 4098:2018 | Leather — Chemical tests — Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter |
ISO 10139-1:2018 | Dentistry — Soft lining materials for removable dentures — Part 1: Materials for short-term use |
BS EN ISO 10477:2004 | Dentistry. Polymer-based crown and bridge materials |
I.S. EN ISO 6872:2015 | DENTISTRY - CERAMIC MATERIALS (ISO 6872:2015) |
EN ISO 11731:2017 | Water quality - Enumeration of Legionella (ISO 11731:2017) |
ISO 15029-2:2018 | Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilised flame heat release method |
ISO 15634:2015 | Iron ores — Determination of chromium content — Flame atomic absorption spectrometric method |
DIN EN ISO 5398-1:2007-10 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 1: QUANTIFICATION BY TITRATION |
ISO 4524-2:2000 | Metallic coatings Test methods for electrodeposited gold and gold alloy coatings Part 2: Mixed flowing gas (MFG) environmental tests |
PREN 17155 : DRAFT 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
BIS IS/ISO 105-E03 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER) |
DIN EN ISO 11640:2013-02 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING (ISO 11640:2012) |
EN ISO 17231:2017 | Leather - Physical and mechanical tests - Determination of water repellency of garment leather (ISO 17231:2017) |
NF EN ISO 105 E12 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING |
CSA Z15883-5 : 2009 : R2014 | WASHER-DISINFECTORS - PART 5: TEST SOILS AND METHODS FOR DEMONSTRATING CLEANING EFFICACY |
ISO 20370:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products Determination of acetate content |
S.R. CEN/TS 17060:2017 | FERTILIZERS - DETERMINATION OF MOLYBDENUM IN CONCENTRATIONS > 10% USING A GRAVIMETRIC METHOD WITH 8-HYDROXYQUINOLINE |
EN 62321-8:2017 | Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) |
I.S. EN ISO 16954:2015 | DENTISTRY - TEST METHODS FOR DENTAL UNIT WATERLINE BIOFILM TREATMENT (ISO 16954:2015) |
BS 6394-2:1985 | Trace elements in milk and milk products Method for the determination of iron content (reference method) |
DIN EN ISO 11704:2015-11 | Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method (ISO 11704:2010) |
17/30353403 DC : 0 | BS EN 17097 - GEOSYNTHETICS - CHARACTERISTICS REQUIRED FOR USE IN SURFACE EROSION CONTROL ON SLOPES AND BANKS |
ONORM EN ISO 17226-1 : 2008 | LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 1: METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
DIN EN ISO 5398-4:2007-10 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 4: QUANTIFICATION BY INDUCTIVELY COUPLED PLASMA - OPTICAL EMISSION SPECTROMETER |
UNI EN ISO 18857-2 : 2012 | WATER QUALITY - DETERMINATION OF SELECTED ALKYLPHENOLS - PART 2: GAS CHROMATOGRAPHIC-MASS SPECTROMETRIC DETERMINATION OF ALKYLPHENOLS, THEIR ETHOXYLATES AND BISPHENOL A IN NON-FILTERED SAMPLES FOLLOWING SOLID-PHASE EXTRACTION AND DERIVATISATION |
DIN EN ISO 20126:2012-06 | DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012) |
UNI EN ISO 17230 : 2011 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF WATER PENETRATION PRESSURE |
XP CEN ISO/TS 21268-2 : 2009 XP | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 2: BATCH TEST USING A LIQUID TO SOLID RATIO OF 10 L/KG DRY MATTER |
I.S. ISO 3856-4:1988 | PAINTS AND VARNISHES - DETERMINATION OF "SOLUBLE" METAL CONTENT - PART 4: DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD AND POLAROGRAPHIC METHOD |
UNI EN 16007 : 2011 | ANIMAL FEEDING STUFFS - DETERMINATION OF OCHRATOXIN A IN ANIMAL FEED BY IMMUNOAFFINITY COLUMN CLEAN-UP AND HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH FLUORESCENCE DETECTION |
15/30317324 DC : 0 | BS EN 14944-3 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
DIN EN ISO 4619:2011-02 | DRIERS FOR PAINTS AND VARNISHES |
BS EN 13362:2018 | Geosynthetic Barriers. Characteristics required for use in the construction of canals |
I.S. EN ISO 4629-2:2016 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF HYDROXYL VALUE - PART 2: TITRIMETRIC METHOD USING A CATALYST (ISO 4629-2:2016) |
17/30360226 DC : 0 | BS EN 17155 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
UNE-EN ISO 17072-1:2011 | Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2011) |
UNI CEN/TS 16233-1 : 2012 | FOODSTUFFS - HPLC METHOD FOR THE DETERMINATION OF XANTHOPHYLLS IN FISH FLESH - PART 1: DETERMINATION OF ASTAXANTHIN AND CANTHAXANTHIN |
UNI CEN/TS 16621 : 2014 | Food analysis - Determination of benzo [a] pyrene, benzo [a] anthracene, chrysene and benzo [b] fluoranthene in food products by high resolution liquid chromatography with fluorescence detector (HPLC-FD) |
BS EN ISO 17678:2010 | Milk and milk products. Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) |
UNI EN 15962 : 2011 | FERTILIZERS - DETERMINATION OF THE COMPLEXED MICRO-NUTRIENT CONTENT AND OF THE COMPLEXED FRACTION OF MICRO-NUTRIENTS |
I.S. EN 14944-3:2007 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS |
DIN EN 71-3:2014-12 | SAFETY OF TOYS - PART 3: MIGRATION OF CERTAIN ELEMENTS |
UNE-EN ISO 14254:2011 | Soil quality - Determination of exchangeable acidity in barium chloride extracts (ISO 14254:2001) |
UNI EN 16159 : 2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF SELENIUM BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HGAAS) AFTER MICROWAVE DIGESTION (DIGESTION WITH 65 % NITRIC ACID AND 30 % HYDROGEN PEROXIDE) |
I.S. EN ISO 4629-1:2016 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF HYDROXYL VALUE - PART 1: TITRIMETRIC METHOD WITHOUT USING A CATALYST (ISO 4629-1:2016) |
NF ISO 6491 : 2011 | ANIMAL FEEDING STUFFS - DETERMINATION OF TOTAL PHOSPHORUS CONTENT - SPECTROPHOTOMETRIC METHOD |
EN ISO 4623-1:2002 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2000) |
ONORM EN ISO 17072-1 : 2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
NF EN ISO 18369-4 : 2017 | OPHTHALMIC OPTICS - CONTACT LENSES - PART 4: PHYSICOCHEMICAL PROPERTIES OF CONTACT LENS MATERIALS |
UNI EN ISO 15324 : 2008 | CORROSION OF METALS AND ALLOYS - EVALUATION OF STRESS CORROSION CRACKING BY THE DROP EVAPORATION TEST |
UNI CEN/TS 15119-2 : 2012 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DETERMINATION OF EMISSIONS FROM PRESERVATIVE TREATED WOOD TO THE ENVIRONMENT - PART 2: WOODEN COMMODITIES EXPOSED IN USE CLASS 4 OR 5 (IN CONTACT WITH THE GROUND, FRESH WATER OR SEA WATER) - LABORATORY METHOD |
EN 13362:2018 | Geosynthetic Barriers - Characteristics required for use in the construction of canals |
I.S. EN 14997:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
BS ISO 15633:2017 | Iron ores. Determination of nickel. Flame atomic absorption spectrometric method |
ISO 27871:2011 | Cheese and processed cheese — Determination of the nitrogenous fractions |
BIS IS 16197-3-2 : 2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3: SCREENING - SECTION 2: TOTAL BROMINE IN POLYMERS AND ELECTRONICS BY COMBUSTION - ION CHROMATOGRAPHY |
UNE-EN 15411:2012 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
UNE-EN ISO 14403-1:2012 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) (ISO 14403-1:2012) |
BS 2000-572(2009) : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
UNE-EN 839:2015 | Wood preservatives - Determination of the protective effectiveness against wood destroying basidiomycetes - Application by surface treatment |
UNE-EN 16711-1:2016 | Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion |
PREN 12594 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
PREN 12485 : DRAFT 2015 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS |
PREN 13075-2 : DRAFT 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
PREN 13614 : DRAFT 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
PREN 648 : DRAFT 2017 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
ISO/TS 13899-1:2004 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 1: Determination of Mo content |
UNI CEN/TS 16637-2 : 2014 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PART 2: HORIZONTAL DYNAMIC SURFACE LEACHING TEST |
UNI EN 16328 : 2013 | FERTILIZERS - DETERMINATION OF 3,4-DIMETHYL-1H-PYRAZOLE PHOSPHATE (DMPP) - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
UNI EN ISO 17730 : 2015 | DENTISTRY - FLUORIDE VARNISHES |
BIS IS 12760 : 2012 | MILK AND MILK PRODUCTS - DETERMINATION OF CALCIUM, SODIUM, POTASSIUM AND MAGNESIUM CONTENTS - ATOMIC ABSORPTION SPECTROMETRIC METHOD |
EN ISO 10704:2015 | Water quality - Measurement of gross alpha and gross beta activity in non-saline water - Thin source deposit method (ISO 10704:2009) |
UNE-EN 1400:2013 | Child use and care articles - Soothers for babies and young children - Safety requirements and test methods |
UNE-EN 16109:2012 | Fertilizers - Determination of complexed micro-nutrient ions in fertilizers - Identification of lignosulfonates |
EN 12447:2001 | Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water |
BS ISO 10204:2017 | Iron ores. Determination of magnesium. Flame atomic absorption spectrometric method |
DIN EN ISO 17075-2:2015-07 (Draft) | LEATHER - CHEMICAL DETERMINATION OF CHROMIUM(6) CONTENT IN LEATHER - PART 2: CHROMATOGRAPHIC METHOD (ISO 17075-2:2017) |
UNI EN ISO 17678 : 2010 | MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
I.S. EN 15558:2009 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO ULSCH |
I.S. EN 14832:2005 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS |
ISO/TS 16780:2015 | Water quality — Determination of polychlorinated naphthalenes (PCN) — Method using gas chromatography (GC) and mass spectrometry (MS) |
ISO 29941:2010 | Condoms — Determination of nitrosamines migrating from natural rubber latex condoms |
I.S. EN ISO 6270-1:2018 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 1: CONTINUOUS CONDENSATION (SINGLE-SIDED EXPOSURE) (ISO 6270-1:2017) |
EN ISO 15496:2018 | Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control (ISO 15496:2018) |
ISO 17280:2015 | Surface active agents Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography |
NF EN ISO 7886-4 : 2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 4: SYRINGES WITH RE-USE PREVENTION FEATURE |
EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) |
EN 14254:2004 | In vitro diagnostic medical devices - Single-use receptacles for the collection of specimens, other than blood, from humans |
ISO 10362-2:2013 | Cigarettes — Determination of water in smoke condensates — Part 2: Karl Fischer method |
I.S. EN 15891:2010 | FOODSTUFFS - DETERMINATION OF DEOXYNIVALENOL IN CEREALS, CEREAL PRODUCTS AND CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND UV DETECTION |
ISO/TR 14569-1:2007 | Dental materials Guidance on testing of wear Part 1: Wear by toothbrushing |
ISO 17315:2014 | Petroleum products and other liquids — Ethanol — Determination of total acidity by potentiometric titration |
ISO 16729:2013 | Soil quality — Digestion of nitric acid soluble fractions of elements |
I.S. EN ISO 5165:1998 | PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD (ISO 5165:2017) |
I.S. CEN TS 15475:2006 | FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
EN ISO 2812-4:2017 | Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017) |
I.S. EN ISO 10720:2007 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS |
I.S. EN ISO 7783:2011 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011) |
UNE-EN ISO 9697:2017 | Water quality - Gross beta activity in non-saline water - Test method using thick source (ISO 9697:2015) |
BS EN ISO 23161:2011 | Soil quality. Determination of selected organotin compounds. Gas-chromatographic method |
UNE-EN ISO 10704:2016 | Water quality - Measurement of gross alpha and gross beta activity in non-saline water - Thin source deposit method (ISO 10704:2009) |
I.S. EN ISO 2812-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 1: IMMERSION IN LIQUIDS OTHER THAN WATER (ISO 2812-1:2017) |
ISO/TS 17234:2003 | Leather Chemical tests Determination of certain azo colourants in dyed leathers |
ISO 20369:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products Determination of citrate content |
I.S. EN 1568-3:2018 | FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 3: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS |
EN ISO 11260:2018 | Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:2018) |
I.S. EN 15751:2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
EN ISO 5398-1:2007 | Leather - Chemical determination of chromic oxide content - Part 1: Quantification by titration (ISO 5398-1:2007) |
ISO 7393-2:2017 | Water quality — Determination of free chlorine and total chlorine — Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes |
ISO/TR 15349-1:1998 | Unalloyed steel Determination of low carbon content Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) |
I.S. EN 15688:2008 | FERTILIZERS - DETERMINATION OF UREASE INHIBITOR N-(NBUTYL) THIOPHOSPHORIC TRIAMIDE (NBPT) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
ISO 11041:1996 | Workplace air — Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour — Method by hydride generation and atomic absorption spectrometry |
ISO 17293-2:2014 | Surface active agents — Determination of chloroacetic acid (chloroacetate) in surfactants — Part 2: Ionic chromatographic method |
ISO 10348:1993 | Photography — Processing wastes — Determination of silver content |
ISO 28641:2010 | Rubber compounding ingredients Organic chemicals General test methods |
I.S. EN ISO 17226-2:2008 | LEATHER - CHEMICAL DETERMINATION OF FORMALDEHYDE CONTENT - PART 2: METHOD USING COLORIMETRIC ANALYSIS |
I.S. ISO 3856-6:1988 | PAINTS AND VARNISHES - DETERMINATION OF "SOLUBLE" METAL CONTENT - PART 6: DETERMINATION OF TOTAL CHROMIUM CONTENT OF THE LIQUID PORTION OF THE PAINT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
ISO 11289:1993 | Heat-processed foods in hermetically sealed containers Determination of pH |
ISO 17058:2004 | Steel and iron — Determination of arsenic content — Spectrophotometric method |
ISO 25101:2009 | Water quality — Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) — Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry |
ISO 11174:1996 | Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electrothermal atomic absorption spectrometric method |
I.S. EN ISO 18369-3:2017 | OPHTHALMIC OPTICS - CONTACT LENSES - PART 3: MEASUREMENT METHODS (ISO 18369-3:2017, CORRECTED VERSION 2017-10-01) |
I.S. EN 15408:2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF SULPHUR (S), CHLORINE (CL), FLUORINE (F) AND BROMINE (BR) CONTENT |
I.S. EN 15705:2010 | FERTILIZERS - DETERMINATION OF UREA CONDENSATES USING HIGHPERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) - ISOBUTYLIDENEDIUREA AND CROTONYLIDENEDIUREA (METHOD A) AND METHYLEN-UREA OLIGOMERS (METHOD B) |
ISO 7203-3:2011 | Fire extinguishing media Foam concentrates Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids |
ISO 26062:2010 | Nuclear technology — Nuclear fuels — Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry |
ISO 6745:1990 | Zinc phosphate pigments for paints — Specifications and methods of test |
DIN EN 13038:2012-01 | Soil improvers and growing media - Determination of electrical conductivity |
S.R. CEN TS 15558:2007 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO ULSCH |
ISO 13898-4:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 4: Determination of cobalt content |
I.S. EN ISO 5398-3:2007 | LEATHER - CHEMICAL DETERMINATION OF CHROMIC OXIDE CONTENT - PART 3: QUANTIFICATION BY ATOMIC ABSORPTION SPECTROMETRY |
I.S. EN ISO 15681-2:2005 | WATER QUALITY - DETERMINATION OF ORTHOPHOSPHATE AND TOTAL PHOSPHORUS CONTENTS BY FLOW ANALYSIS (FIA AND CFA) - PART 2: METHOD BY CONTINUOUS FLOW ANALYSIS (CFA) |
ASTM D 7873 : 20131 | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120°C Without the Inclusion of Water (Dry TOST Method) |
I.S. EN 15791:2009 | FOODSTUFFS - DETERMINATION OF DEOXYNIVALENOL IN ANIMAL FEED - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEAN-UP |
I.S. CEN TS 15621:2007 | ANIMAL FEEDING STUFFS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE, COBALT AND MOLYBDENUM AFTER PRESSURE DIGESTION BY ICP-AES |
S.R. CEN TS 16187:2011 | FOODSTUFFS - DETERMINATION OF FUMONISIN B1 AND FUMONISIN B2 IN PROCESSED MAIZE CONTAINING FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION AFTER PRECOLUMN DERIVATIZATION |
I.S. CEN TS 15477:2006 | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
I.S. EN ISO 20541:2008 | MILK AND MILK PRODUCTS - DETERMINATION OF NITRATE CONTENT - METHOD BY ENZYMATIC REDUCTION AND MOLECULAR-ABSORPTION SPECTROMETRY AFTER GRIESS REACTION |
ISO 10136-5:1993 | Glass and glassware — Analysis of extract solutions — Part 5: Determination of iron(III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry |
I.S. EN 15488:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD |
I.S. EN 15553:2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
ISO 6246:2017 | Petroleum products — Gum content of fuels — Jet evaporation method |
ISO 4787:2010 | Laboratory glassware Volumetric instruments Methods for testing of capacity and for use |
EN 62321-4:2014/A1:2017 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 4: MERCURY IN POLYMERS, METALS AND ELECTRONICS BY CV-AAS, CV-AFS, ICP-OES AND ICP-MS (IEC 62321-4:2013/A1:2017) |
DIN EN ISO 12402-7:2015-08 (Draft) | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 12014-3:2005-08 | Foodstuffs - Determination of nitrate and/or nitrite content - Part 3: Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reduction of nitrate to nitrite |
DIN EN 13614:2011-06 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
DIN EN ISO 15681-1:2005-05 | Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 1: Method by flow injection analysis (FIA) (ISO 15681-1:2003) |
DIN EN ISO 8502-2:2013-10 (Draft) | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 2: LABORATORY DETERMINATION OF CHLORIDE ON CLEANED SURFACES (ISO 8502-2:2017) |
DIN EN ISO 10504:2015-11 | Starch derivatives - Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups - Method using high-performance liquid chromatography (ISO 10504:2013) |
DIN EN 14397-2:2004-09 | Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials |
DIN EN ISO 15349-2:2003-09 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
DIN EN 12766-3:2005-02 | Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD) |
DIN EN 14944-1:2015-06 (Draft) | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
DIN EN ISO 8502-8:2005-03 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 8: FIELD METHOD FOR THE REFRACTOMETRIC DETERMINATION OF MOISTURE |
DIN EN 13518:2005-11 | FOOTWEAR - TEST METHODS FOR UPPERS - WATER RESISTANCE |
DIN EN ISO 8502-5:2005-03 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998) |
DIN EN ISO 10319:2015-09 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST (ISO 10319:2015) |
DIN EN 13138-2:2015-02 | Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held |
DIN EN 71-5:2015-12 | SAFETY OF TOYS - PART 5: CHEMICAL TOYS (SETS) OTHER THAN EXPERIMENTAL SETS |
DIN EN ISO 17895:2005-06 | PAINTS AND VARNISHES - DETERMINATION OF THE VOLATILE ORGANIC COMPOUND CONTENT OF LOW-VOC EMULSION PAINTS (IN-CAN VOC) |
DIN EN 897:2013-02 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM CARBONATE |
DIN EN 14152:2014-08 | Foodstuffs - Determination of vitamin B2 by high performance liquid chromatography |
BS EN 13268:2001 | Surface active agents. Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adductspylene |
BS EN 14880:2005 | Surface active agents. Determination of inorganic sulfate content in anionic surface active agents. Potentiometric lead selective electrode titration method |
BS EN ISO 8871:1997 | Elastomeric parts for aqueous parenteral preparations |
BS EN 974:2003 | Chemicals used for treatment of water intended for human consumption. Phosphoric acid |
BS EN 901:2013 | Chemicals used for treatment of water intended for human consumption. Sodium hypochlorite |
ISO 3262-21:2000 | Extenders for paints — Specifications and methods of test — Part 21: Silica sand (unground natural quartz) |
ISO 6744-3:1999 | Binders for paints and varnishes — Alkyd resins — Part 3: Determination of unsaponifiable matter content |
BS EN 13996:2002 | Surface active agents. Foaming power and antifoaming power. Turbine stirring method |
ISO 15788-2:2003 | Animal and vegetable fats and oils — Determination of stigmastadienes in vegetable oils — Part 2: Method using high-performance liquid chromatography (HPLC) |
ISO 5814:2012 | Water quality — Determination of dissolved oxygen — Electrochemical probe method |
BS EN 12596:2014 | Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary |
BS EN 12120:2012 | Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfite |
BS EN 900:2014 | Chemicals used for treatment of water intended for human consumption. Calcium hypochlorite |
BS EN 12912:2012 | Products used for treatment of water intended for human consumption. Barite |
UNE-EN 13037:2012 | Soil improvers and growing media - Determination of pH |
BS EN 14670:2005 | Surface active agents. Sodium dodecyl sulfate. Analytical method |
UNE-EN ISO 4263-3:2016 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015) |
BS EN ISO 10700:1995 | Steel and iron. Determination of manganese content. Flame atomic absorption spectrometric method |
BS EN ISO 5403:2002 | Leather. Physical and mechanical tests. Determination of water resistance of flexible leather |
BS EN 2435-004:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion and fluid resistance with surface preparation tolerance |
BS EN 13543:2001 | Manufactured articles filled with feather and down. Measurement of water absorption of filling material |
ISO 6222:1999 | Water quality Enumeration of culturable micro-organisms Colony count by inoculation in a nutrient agar culture medium |
ISO 28399:2011 | Dentistry Products for external tooth bleaching |
BS EN ISO 11216:1998 | Modified starch. Determination of content of carboxymethyl groups in carboxymethyl starch |
BS EN ISO 18412:2006 | Water quality. Determination of chromium (VI). Photometric method for weakly contaminated water |
ISO 105-A01:2010 | Textiles Tests for colour fastness Part A01: General principles of testing |
ISO 10319:2015 | Geosynthetics — Wide-width tensile test |
BS EN 12873-4:2006 | Influence of materials on water intended for human consumption. Influence due to migration Test method for water treatment membranes |
BS EN ISO 5764:2009 | Milk. Determination of freezing point. Thermistor cryoscope method (Reference method) |
ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
ISO 8502-9:1998 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts |
BS EN ISO 2811-3:2011 | Paints and varnishes. Determination of density Oscillation method |
BS EN ISO 15680:2003 | Water quality. Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption |
BS EN ISO 3823-2 : 2003 | DENTISTRY - ROTARY BUR INSTRUMENTS - PART 2: FINISHING BURS |
BS EN ISO 13757:1996 | Methods of test for petroleum and its products. Liquefied petroleum gases. Determination of oily residues. High temperature method |
BS EN 4406:2006 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane coating. Abrasion resistant |
ISO 6271-1:2004 | Clear liquids Estimation of colour by the platinum-cobalt scale Part 1: Visual method |
BS EN 15360:2007 | Fertilizers. Determination of dicyandiamide. Method using high-performance liquid chromatography (HPLC) |
BS EN 1197:2014 | Chemicals used for treatment of water intended for human consumption. Monozinc phosphate solution |
ISO 182-2:1990 | Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 2: pH method |
DIN EN ISO 10993-14:2009-08 | Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001) |
UNE-EN ISO 17943:2016 | Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 17943:2016) |
BS EN ISO 11543:2002 | Modified starch. Determination of hydroxypropyl content. Method using proton nuclear magnetic resonance (NMR) spectrometry |
BS EN 2436-002:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer High corrosion resistance |
UNE-EN ISO 22674:2016 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
BS EN 14984:2016 | Liming materials. Determination of product effect on soil pH. Soil incubation method |
BS EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption. Test methods Influence of factory made cementitious products on organoleptic parameters |
BS EN 13273:2001 | Surface active agents. Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC) |
BS EN ISO 11376:2001 | Plastics. Epoxy resins and glycidyl esters. Determination of inorganic chlorine |
BS EN 12836:2002 | Surface active agents. Determination of the water number of alkoxylated products |
BS EN 12780:2002 | Water quality. Detection and enumeration of Pseudomonas aeruginosa by membrane filtration |
BS EN ISO 22674:2016 | Dentistry. Metallic materials for fixed and removable restorations and appliances |
ISO 15324:2000 | Corrosion of metals and alloys Evaluation of stress corrosion cracking by the drop evaporation test |
BS EN 12139:1999 | Surface active agents. Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC |
BS EN 12457-3:2002 | Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with a high solid content and with a particle size below 4 mm (without or with size reduction) |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 11543:2000 | Modified starch Determination of hydroxypropyl content Method using proton nuclear magnetic resonance (NMR) spectrometry |
BS EN 13516:2002 | Footwear. Test methods for uppers, lining and insocks. Colour fastness to rubbing |
BS EN 14111:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of iodine value |
UNE-EN 13177:2010 | Chemicals used for treatment of water intended for human consumption - Methanol |
BS EN ISO 2114:2000 | Plastics (polyester resins) and paints and varnishes (binders). Determination of partial acid value and total acid value |
BS EN ISO 8502-11:2006 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Field method for the turbidimetric determination of water-soluble sulfate |
ISO 105-G01:2016 | Textiles Tests for colour fastness Part G01: Colour fastness to nitrogen oxides |
ISO 13294:1997 | Dental handpieces Dental air-motors |
UNE-EN 14112:2017 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
UNE-EN ISO 10523:2012 | Water quality - Determination of pH (ISO 10523:2008) |
UNE-EN ISO 21627-3:2010 | Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009) |
BS EN 13038:2011 | Soil improvers and growing media. Determination of electrical conductivity |
ISO 12228-2:2014 | Determination of individual and total sterols contents Gas chromatographic method Part 2: Olive oils and olive pomace oils |
BS EN 13250:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways |
ISO 105-C06:2010 | Textiles Tests for colour fastness Part C06: Colour fastness to domestic and commercial laundering |
ISO 11644:2009 | Leather — Test for adhesion of finish |
BS EN ISO 105-E09:2010 | Textiles. Tests for colour fastness Colour fastness to potting |
BS EN 13251:2016 | Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures |
BS EN 14697:2005 | Textiles. Terry towels and terry towel fabrics. Specifications and methods of test |
UNE-EN 12386:2013 | Chemicals used for treatment of water intended for human consumption - Copper sulfate |
BS EN ISO 3262-5:1998 | Extenders for paints. Specifications and methods of test Natural crystalline calcium carbonate |
BS EN 13368-1:2014 | Fertilizers. Determination of chelating agents in fertilizers by chromatography Determination of EDTA, HEEDTA and DTPA by ion chromatography |
BS EN 12286:1999 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures |
BS EN ISO 3262-18:2000 | Extenders for paints. Specifications and methods of test Precipitated sodium aluminium silicate |
BS EN 12823-1:2014 | Foodstuffs. Determination of vitamin A by high performance liquid chromatography Measurement of all-E-retinol and 13-Z-retinol |
BS EN ISO 15586:2003 | Water quality. Determination of trace elements using atomic absorption spectrometry with graphite furnace |
BS EN 12672:2008 | Chemicals used for treatment of water intended for human consumption. Potassium permanganate |
BS EN 891:2004 | Chemicals used for treatment of water intended for human consumption. Iron (III) chloride sulfate |
BS EN 1390:2006 | Wood preservatives. Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae. Laboratory method |
BS EN ISO 4583:1998 | Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine |
BS EN ISO 15702:2000 | Leather. Tests for colour fastness. Colour fastness to machine washing |
BS EN ISO 6869:2001 | Animal feeding stuffs. Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc. Method using atomic absorption spectrometry |
ISO 10873:2010 | Dentistry Denture adhesives |
BS EN 14712:2005 | Surface active agents. Determination of physical stability in alkaline and acid solutions |
BS EN 13132:2000 | Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching |
BS EN ISO 21627-2:2009 | Plastics. Epoxy resins. Determination of chlorine content Easily saponifiable chlorine |
BS EN 1811 : 2011 | REFERENCE TEST METHOD FOR RELEASE OF NICKEL FROM ALL POST ASSEMBLIES WHICH ARE INSERTED INTO PIERCED PARTS OF THE HUMAN BODY AND ARTICLES INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN |
BS EN 12606-1:2015 | Bitumen and bituminous binders. Determination of the paraffin wax content Method by distillation |
BS EN ISO 13759:1997 | Methods of test for petroleum and its products. Petroleum products. Determination of alkyl nitrate in diesel fuels. Spectrometric method |
BS EN 13506:2002 | Water quality. Determination of mercury by atomic fluorescence spectrometry |
BS EN 12125:2012 | Chemicals used for treatment of water intended for human consumption — Sodium thiosulfate |
BS EN ISO 7218 : 2007 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS |
BS EN ISO 9562:2004 | Water quality. Determination of adsorbable organically bound halogens (AOX) |
ISO 15181-4:2008 | Paints and varnishes Determination of release rate of biocides from antifouling paints Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate |
BS EN ISO 483:2005 | Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value |
BS EN 12458:1999 | Surface active agents. Determination of stability in hard water |
BS EN ISO 3830:1996 | Petroleum products. Determination of lead content of gasoline. Iodine monochloride method |
BS EN 15115:2006 | Textile floor coverings. Determination of sensitivity to spilled water |
BS EN ISO 4404-1:2012 | Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids Water-containing fluids |
BS EN ISO 105-E01:2013 | Textiles. Tests for colour fastness Colour fastness to water |
UNE-EN 13249:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
BS EN 13763-12:2003 | Explosives for civil uses. Detonators and relays Determination of resistance to hydrostatic pressure |
BS EN 13075-2:2016 | Bitumen and bituminous binders. Determination of breaking behaviour Determination of fines mixing time of cationic bituminous emulsions |
BS EN ISO 8871-3:2004 | Elastomeric parts for parenterals and for devices for pharmaceuticals use Determination of released-particle count |
BS EN ISO 11998:2006 | Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings |
BS EN 14289:2003 | Leather. Physical and mechanical tests. Determination of water penetration pressure |
BS EN ISO 13402:2001 | Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure |
BS EN 14132:2009 | Foodstuffs. Determination of ochratoxin A in barley and roasted coffee. HPLC method with immunoaffinity column clean-up |
BS EN ISO 4049:2009 | Dentistry. Polymer-based restorative materials |
BS EN ISO 15682:2001 | Water quality. Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection |
BS EN ISO 8655-2:2002 | Piston-operated volumetric apparatus Piston pipettes |
BS EN ISO 3262-22:2001 | Extenders for paints. Specifications and methods of test Flux-calcined kieselguhr |
BS EN 13503-6:2002 | Ophthalmic implants. Intraocular lenses Shelf-life and transport stability |
ISO 16588:2002 | Water quality — Determination of six complexing agents — Gas-chromatographic method |
BS EN ISO 16744:2003 | Dentistry. Base metal materials for fixed dental restorations |
BS EN ISO 13395:1996 | Water quality. Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
BS EN ISO 105-Z03:1998 | Textiles. Tests for colour fastness Intercompatibility of basic dyes for acrylic fibres |
ISO 3262-14:2000 | Extenders for paints — Specifications and methods of test — Part 14: Cristobalite |
BS EN ISO 23631:2006 | Water quality. Determination of dalapon, trichloroacetic acid and selected haloacetic acids. Method using gas chromatography (GC-ECD and/or GCMS detection) after liquid-liquid extraction and derivatization |
BS EN ISO 7490:2001 | Dental gypsum-bonded casting investments |
BS EN ISO 8871-2 : 2004 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION |
BS EN 12766-1:2000 | Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
BS EN ISO 6271-1:2004 | Clear liquids. Estimation of colour by the platinum-cobalt scale Visual method |
ISO 3826-4:2015 | Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features |
ISO 8623:2015 | Tall-oil fatty acids for paints and varnishes — Test methods and characteristic values |
ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
ISO 15349-2:1999 | Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) |
BS EN 13138-3:2014 | Buoyant aids for swimming instruction Safety requirements and test methods for swim seats to be worn |
BS EN ISO 8502-2:2017 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Laboratory determination of chloride on cleaned surfaces |
ISO 17730:2014 | Dentistry Fluoride varnishes |
BS EN 725-12:2001 | Advanced technical ceramics. Methods of test for ceramic powders Chemical analysis of zirconia |
BS EN ISO 8655-6:2002 | Piston-operated volumetric apparatus Gravimetric methods for the determination of measurement error |
BS EN ISO 15212-1:1999 | Oscillation-type density meters Laboratory instruments |
BS EN ISO 9694:1999 | Dental phosphate-bonded casting investments |
ISO 15703:1998 | Leather — Tests for colour fastness — Colour fastness to mild washing |
ISO 6873:2013 | Dentistry — Gypsum products |
ISO 4263-4:2006 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 4: Procedure for industrial gear oils |
ISO 8655-6:2002 | Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error |
BS EN ISO 9917-1:2007 | Dentistry. Water-based cements Powder/liquid acid-base cements |
ISO 8502-11:2006 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
ISO 6867:2000 | Animal feeding stuffs Determination of vitamin E content Method using high-performance liquid chromatography |
ISO 10703:2007 | Water quality Determination of the activity concentration of radionuclides Method by high resolution gamma-ray spectrometry |
ISO 3630-1:2008 | Dentistry Root-canal instruments Part 1: General requirements and test methods |
ISO 11702:2016 | Animal and vegetable fats and oils Enzymatic determination of total sterols content |
ISO 18412:2005 | Water quality — Determination of chromium(VI) — Photometric method for weakly contaminated water |
ISO 12966-2:2017 | Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 2: Preparation of methyl esters of fatty acids |
EN 1162:1996 | Feather and down - Test methods - Determination of the oxygen index number |
EN 1136:1994 | Fruit and vegetable juices - Determination of phosphorus content - Spectrometric method |
EN 13512:2001 | Footwear - Test methods for uppers and lining - Flex resistance |
EN 12126:2012 | Chemicals used for treatment of water intended for human consumption - Liquefied ammonia |
EN 13523-27:2017 | Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test) |
EN 1014-4:2010 | Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote |
EN 1138:1994 | Fruit and vegetable juices - Enzymatic determination of L-malic acid (L-malate) content - NADH spectrometric method |
DIN EN 14664:2005-02 | Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate, solid |
EN 1135:1994 | Fruit and vegetable juices - Determination of ash |
DIN EN 14671:2006-09 | Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride |
DIN EN 15491:2007-11 | Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method |
DIN EN 14123:2008-03 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] AND THE SUM OF AFLATOXIN B[1], B[2], G[1] AND G[2] IN HAZELNUTS, PEANUTS, PISTACHIOS, FIGS, AND PAPRIKA POWDER - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST-COLUMN DERIVATISATION AND IMMUNOAFFINITY COLUMN CLEANUP |
DIN EN ISO 14403:2002-07 | WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE BY CONTINUOUS FLOW ANALYSIS |
CEN/TS 15560:2007 | Fertilizers - Determination of total nitrogen in calcium cyanamide nitrate free |
EN 15408:2011 | Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
EN 118:2013 | Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) |
DIN EN 14898:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ACTIVE MEDIA FILTERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
EN 839:2014 | Wood preservatives - Determination of the protective effectiveness against wood destroying basidiomycetes - Application by surface treatment |
CEN/TS 16175-2:2013 | Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS) |
UNI EN 16166 : 2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
EN 13138-1:2014 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
CEN/TS 16170:2012 | Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) |
EN 12125:2012 | Chemicals used for treatment of water intended for human consumption - Sodium thiosulfate |
DIN EN ISO 9073-11:2005-03 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 11: RUN-OFF |
DIN EN 14945:2006-03 | Refractory products and materials - Spectrometric determination of chromium(VI) in chrome bearing refractories, before and after use |
CEN/TS 15408:2006 | Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
CEN/TS 16375:2013 | Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method |
DIN EN ISO 6744-4:2004-09 | Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999) |
EN 13368-1:2014 | Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 1: Determination of EDTA, HEEDTA and DTPA by ion chromatography |
EN 15360:2007 | Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC) |
EN 13435 : 2002 | SURFACE ACTIVE AGENTS - DETERMINATION OF FREE AMINE CONTENT OF ALKYL DIMETHYL BETAINES |
EN 13252:2016 | Geotextiles and geotextile-related products - Characteristics required for use in drainage systems |
EN 13176:2015 | Chemicals used for treatment of water intended for human consumption - Ethanol |
DIN EN 14670:2005-09 | Surface active agents - Sodium dodecyl sulfate - Analytical method; German version EN 14670:2005 |
UNI EN 13138-2 : 2015 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
EN 1139:1994 | Fruit and vegetable juices - Enzymatic determination of D-isocitric acid content - NADPH spectrometric method |
CEN/TS 15864:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
DIN EN 14456:2004-09 | Products used for treatment of water intended for human consumption - Bone charcoal |
CEN/TS 17060:2017 | Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline |
CEN/TS 15968:2010 | Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS |
EN 16128:2015 | Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release |
CEN/TS 14997:2006 | Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with continuous pH-control |
EN 1197:2014 | Chemicals used for treatment of water intended for human consumption - Monozinc phosphate solution |
DIN EN ISO 15680:2004-04 | Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003) |
EN 13506 : 2001 | WATER QUALITY - DETERMINATION OF MERCURY BY ATOMIC FLUORESCENCE SPECTROMETRY |
EN 12847:2009 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
EN 12873-4:2006 | Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes |
EN 1203:2005 | Chemicals used for treatment of water intended for human consumption - Tripotassium orthophosphate |
EN 1134:1994 | Fruit and vegetable juices - Determination of sodium, potassium, calcium and magnesium content by atomic absorption spectrometry (AAS) |
EN 12175:2013 | Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acid |
EN 15476:2009 | Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda |
CEN ISO/TS 16179:2012 | Footwear - Critical substances potentially present in footwear and footwear components - Determination of organotin compounds in footwear materials (ISO/TS 16179:2012) |
DIN EN 14524:2004-10 | FOODSTUFFS - DETERMINATION OF OKADAIC ACID IN MUSSELS - HPLC METHOD WITH SOLID PHASE EXTRACTION CLEAN-UP, DERIVATIZATION AND FLUORIMETRIC DETECTION |
CEN/TS 16319:2012 | Fertilizers - Determination of trace elements - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
DIN EN 888:2005-02 | Chemicals used for treatment of water intended for human consumption - Iron (III) chloride |
EN 16166:2012 | Sludge, treated biowaste and soil - Determination of adsorbable organically bound halogens (AOX) |
CEN/TS 15561:2007 | Fertilizers - Determination of total nitrogen in calcium cyanamide containing nitrates |
DIN EN 14652:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
I.S. EN ISO 105-E03:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER) |
EN 15478:2009 | Fertilizers - Determination of total nitrogen in urea |
DIN EN ISO 16266:2008-05 | Water quality - Detection and enumeration of Pseudomonas aeruginosa - Method by membrane filtration (ISO 16266:2006) |
CEN/TS 14494 : 2003 | LEATHER - CHEMICAL TESTS - DETERMINATION OF THE CONTENT OF PENTACHLOROPHENOL IN LEATHER |
DIN EN ISO 21627-2:2010-01 | Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009) |
EN 13138-2:2014 | Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held |
DIN EN 14621:2006-03 | Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns |
DIN EN ISO 4934:2004-05 | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
EN 15604:2009 | Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen |
EN 12606-2:1999 | Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method of extraction |
EN 1142:1994 | Fruit and vegetable juices - Determination of the sulfate content |
DIN EN 889:2005-03 | Chemicals used for treatment of water intended for human consumption - Iron (II) sulfate |
EN 60601-2-24:2015 | Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
DIN EN 900:2000-03 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM HYPOCHLORITE |
DIN EN ISO 15320:2011-11 | Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011) |
EN 16319:2013+A1:2015 | Fertilizers and liming materials - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
CEN/TR 14823:2003 | Durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method |
DIN EN ISO 11732:2005-05 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
EN ISO 1135-4 : 2015 COR 2016 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015) |
EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography |
DIN EN ISO 10139-1:2005-05 | DENTISTRY - SOFT LINING MATERIALS FOR REMOVABLE DENTURES - PART 1: MATERIALS FOR SHORT-TERM USE |
DIN ISO 14256-2:2006-07 | SOIL QUALITY - DETERMINATION OF NITRATE, NITRITE AND AMMONIUM IN FIELD-MOIST SOILS BY EXTRACTION WITH POTASSIUM CHLORIDE SOLUTION - PART 2: AUTOMATED METHOD WITH SEGMENTED FLOW ANALYSIS |
DIN EN ISO 4045:2008-05 | LEATHER - CHEMICAL TESTS - DETERMINATION OF PH |
EN 15553:2007 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
DIN EN ISO 11731-2:2008-06 | WATER QUALITY - DETECTION AND ENUMERATION OF LEGIONELLA - PART 2: DIRECT MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL COUNTS |
DIN EN 14176:2017-03 | FOODSTUFFS - DETERMINATION OF DOMOIC ACID IN RAW SHELLFISH, RAW FINFISH AND COOKED MUSSELS BY RP-HPLC USING UV DETECTION |
DIN EN 15621:2017-10 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
DIN 19734:1999-01 | DETERMINING THE CHROMIUM(6) CONTENT OF SOIL IN PHOSPHATE BUFFERED EXTRACT |
DIN EN ISO 15091:2013-04 | PAINTS AND VARNISHES - DETERMINATION OF ELECTRICAL CONDUCTIVITY AND RESISTANCE (ISO 15091:2012) |
DIN ISO 11271:2003-03 | Soil quality - Determination of redox potential - Field method (ISO 11271:2002) |
DIN EN ISO 1562:2004-08 | DENTISTRY - CASTING GOLD ALLOYS |
NF EN ISO 11127-3 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 3: DETERMINATION OF APPARENT DENSITY |
DIN EN 12122:2005-08 | Chemicals used for treatment of water intended for human consumption - Ammonia solution |
DIN ISO 11277:2002-08 | Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation (ISO 11277:1998 + Corr 1:2002) |
EN 12014-4:2005 | Foodstuffs - Determination of nitrate and/or nitrite content - Part 4: Ion-exchange chromatographic (IC) method for the determination of nitrate and nitrite content of meat products |
EN 13251:2016 | Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures |
DIN EN ISO 8502-2:2017-05 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 2: LABORATORY DETERMINATION OF CHLORIDE ON CLEANED SURFACES (ISO 8502-2:2017) |
EN 1164:1998 | Feather and down - Test methods - Determination of the turbidity of an aqueous extract |
DIN EN ISO 11642:2013-02 | Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2012) |
EN ISO 17070:2015 | Leather - Chemical tests - Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content (ISO 17070:2015) |
EN 1141:1994 | Fruit and vegetable juices - Spectrometric determination of proline content |
DIN EN 14122:2003-09 | FOODSTUFFS - DETERMINATION OF VITAMIN B1 BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
DIN EN ISO 3262-22:2002-02 | Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined Kieselguhr (ISO 3262-22:2001); English version of DIN EN ISO 3262-22 |
DIN EN 14820:2004-11 | SINGLE-USE CONTAINERS FOR HUMAN VENOUS BLOOD SPECIMEN COLLECTION |
EN 14429:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition |
EN 15560:2009 | Fertilizers - Determination of total nitrogen in calcium cyanamide nitrate free |
EN 12124:2012 | Chemicals used for treatment of water intended for human consumption - Sodium sulfite |
DIN EN 12875-5:2006-06 | Mechanical dishwashing resistance of utensils - Part 5: Rapid test for ceramic catering articles |
EN 62321-5:2014 | Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
EN 1240:2011 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
DIN EN 14833:2005-09 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS |
DIN EN ISO 9831:2004-02 | Animal feeding stuffs, animal products, and faeces or urine - Determination of gross calorific value - Bomb calorimeter method (ISO 9831:1998) |
CEN/TR 15119:2005 | Durability of wood and wood-based products - Estimation of emissions from preservative treated wood to the environment - Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground), and wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method |
EN 12902:2004 | Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Methods of test |
DIN 38409-7:2005-12 | German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 7: Determination of acid and base-neutralizing capacities (H 7) |
CEN/TS 15750:2008 | Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
DIN EN ISO 5402-1:2012-03 | LEATHER - DETERMINATION OF FLEX RESISTANCE - PART 1: FLEXOMETER METHOD (ISO 5402-1:2017) |
CEN/TS 14418:2014 | Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers |
DIN EN ISO 9227:2017-07 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
DIN EN 15933:2012-11 | Sludge, treated biowaste and soil - Determination of pH |
DIN EN 15487:2007-11 | Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method |
CEN/TS 15478:2006 | Fertilizers - Determination of total nitrogen in urea |
EN ISO 4787:2011 | Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15) |
CEN/TS 15477:2006 | Fertilizers - Determination of the water-soluble potassium content |
CEN/TS 15562:2007 | Fertilizers - Determination of cyanamide nitrogen |
CEN/TS 15606:2009 | Foodstuffs - Determination of acesulfame-K, aspartame, neohesperidine-dihydrochalcone and saccharin - High performance liquid chromatographic method |
DIN EN ISO 15587-1:2002-07 | WATER QUALITY - DIGESTION FOR THE DETERMINATION OF SELECTED ELEMENTS IN WATER - PART 1: AQUA REGIA DIGESTION |
EN 1211:2005 | Chemicals used for treatment of water intended for human consumption - Potassium tripolyphosphate |
EN 12133:1997 | Fruit and vegetable juices - Determination of chloride content - Potentiometric titration method |
DIN EN 14030:2003-11 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO ACID AND ALKALINE LIQUIDS |
EN 1133:1994 | Fruit and vegetable juices - Determination of the formol number |
DIN ISO 14869-1:2003-01 | SOIL QUALITY - DISSOLUTION FOR THE DETERMINATION OF TOTAL ELEMENT CONTENT - PART 1: DISSOLUTION WITH HYDROFLUORIC AND PERCHLORIC ACIDS |
EN 16318:2013+A1:2016 | Fertilizers and liming materials - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) |
EN 12671:2016 | Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ |
CEN/TS 14417:2014 | Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers |
CEN/TS 15475:2006 | Fertilizers - Determination of ammoniacal nitrogen |
DIN EN ISO 8192:2007-05 | Water quality - Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation (ISO 8192:2007) |
DIN EN ISO 11885:2009-09 | WATER QUALITY - DETERMINATION OF SELECTED ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
DIN ISO 11047:2003-05 | SOIL QUALITY - DETERMINATION OF CADMIUM, CHROMIUM, COBALT, COPPER, LEAD, MANGANESE, NICKEL AND ZINC IN AQUA REGIA EXTRACTS OF SOIL - FLAME AND ELECTROTHERMAL ATOMIC ABSORPTION SPECTROMETRIC METHODS |
EN 62321:2009 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
CEN ISO/TS 21268-3:2009 | Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 3: Up-flow percolation test (ISO/TS 21268-3:2007) |
CEN/TS 14537:2003 | Foodstuffs - Determination of neohesperidin-dihydrochalcon |
EN 12014-3:2005 | Foodstuffs - Determination of nitrate and/or nitrite content - Part 3: Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reduction of nitrate to nitrite |
EN ISO 16266:2008 | Water quality - Detection and enumeration of Pseudomonas aeruginosa - Method by membrane filtration (ISO 16266:2006) |
DIN EN 15890:2010-12 | Foodstuffs - Determination of patulin in fruit juice and fruit based pur?e for infants and young children - HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection |
DIN EN ISO 105-E03:2010-08 | Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010) |
CEN/TS 15083-2:2005 | Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi |
DIN EN 15911:2011-01 | Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection |
EN 15477:2009 | Fertilizers - Determination of the water-soluble potassium content |
EN 12630:1999 | Fruit and vegetable juices - Determination of glucose, fructose, sorbitol and sucrose contents - Method using high performance liquid chromatography |
EN 12672:2016 | Chemicals used for treatment of water intended for human consumption - Potassium permanganate |
CEN/TS 16201:2013 | Sludge, treated biowaste and soil - Determination of viable plant seeds and propagules |
DIN EN 14039:2005-01 | Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography; |
DIN EN ISO 15586:2004-02 | WATER QUALITY - DETERMINATION OF TRACE ELEMENTS USING ATOMIC ABSORPTION SPECTROMETRY WITH GRAPHITE FURNACE |
DIN EN ISO 15061:2001-12 | WATER QUALITY - DETERMINATION OF DISSOLVED BROMATE - METHOD BY LIQUID CHROMATOGRAPHY OF IONS |
DIN EN ISO 18857-1:2007-02 | WATER QUALITY - DETERMINATION OF SELECTED ALKYLPHENOLS - PART 1: METHOD FOR NON-FILTERED SAMPLES USING LIQUID-LIQUID EXTRACTION AND GAS CHROMATOGRAPHY WITH MASS SELECTIVE DETECTION |
CEN/TS 15604:2007 | Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen |
EN 16320:2013+A1:2017 | Fertilizers and liming materials - Determination of mercury by vapour generation (VG) after aqua regia dissolution |
CEN/TS 15754:2008 | Animal feeding stuffs - Determination of sugar content - High performance exchange chromatographic method (HPAEC-PAD) |
DIN EN 14254:2004-09 | In vitro diagnostic medical devices - Single-use receptacles for the collection of specimens, other than blood, from humans |
DIN EN ISO 6744-3:2004-09 | Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999) |
DIN EN ISO 105-A01:2010-05 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
DIN 51086-1:1998-04 | TESTING OF OXIDIC RAW MATERIALS AND MATERIALS FOR CERAMICS, GLASS AND GLAZES - PART 1: DETERMINATION OF BORIC OXIDE |
DIN EN 15109:2007-02 | SURFACE ACTIVE AGENTS - DETERMINATION OF THE ACTIVE MATTER CONTENT OF ALKYLAMIDOPROPYLBETAINES |
DIN EN 14371:2004-11 | Surface active agents - Determination of foamability and degree of foamability - Circulation test method |
DIN EN ISO 105-B07:2009-10 | Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial perspiration (ISO 105-B07:2009) |
DIN EN ISO 16264:2004-05 | Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection (ISO 16264:2002) |
DIN EN ISO 105-E12:2010-08 | Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010) |
DIN EN ISO 8502-11:2006-08 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006) |
EN 15491:2007 | Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method |
DIN EN ISO 11641:2013-02 | Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012) |
DIN EN ISO 13934-2:1999-04 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014) |
DIN EN 14352:2004-10 | Foodstuffs - Determination of fumonisin B1 and B2 in maize based foods - HPLC method with immunoaffinity column clean up |
DIN EN 16320:2017-05 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
DIN EN 14712:2005-08 | Surface active agents - Determination of physical stability in alkaline and acid solutions; German version EN 14712:2005 |
I.S. EN 1207:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - TETRAPOTASSIUM PYROPHOSPHATE |
DIN EN ISO 3681:2007-10 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SAPONIFICATION VALUE BY THE TITRIMETRIC METHOD |
DIN EN ISO 10304-1:2009-07 | WATER QUALITY - DETERMINATION OF DISSOLVED ANIONS BY LIQUID CHROMATOGRAPHY OF IONS - PART 1: DETERMINATION OF BROMIDE, CHLORIDE, FLUORIDE, NITRATE, NITRITE, PHOSPHATE AND SULFATE |
DIN EN 14669:2005-09 | SURFACE ACTIVE AGENTS - DETERMINATION OF ANIONIC SURFACE ACTIVE AGENTS AND SOAPS IN DETERGENTS AND CLEANSERS - POTENTIOMETRIC TWO-PHASE TITRATION METHOD |
DIN EN ISO 15711:2005-03 | Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
DIN EN ISO 15710:2006-09 | Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002) |
DIN EN ISO 21627-3:2010-01 | Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009) |
DIN EN ISO 105-C10:2007-06 | Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda (ISO 105-C10:2006) |
DIN ISO 14869-2:2003-01 | SOIL QUALITY - DISSOLUTION FOR THE DETERMINATION OF TOTAL ELEMENT CONTENT - PART 2: DISSOLUTION BY ALKALINE FUSION |
DIN EN ISO 5402:2003-10 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD |
DIN EN ISO 21627-1:2010-01 | Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009) |
DIN EN ISO 5403:2003-10 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF WATER RESISTANCE OF FLEXIBLE LEATHER |
DIN EN 12873-4:2006-06 | Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes |
ONORM EN ISO 21563 : 2013 | DENTISTRY - HYDROCOLLOID IMPRESSION MATERIALS (ISO 21563:2013) |
CEN ISO/TS 17764-1:2006 | Animal feeding stuffs - Determination of the content of fatty acids - Part 1: Preparation of methyl esters (ISO/TS 17764-1:2002) |
CEN/TS 15863:2012 | Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions |
ONORM EN 13138-3 : 2015 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
DIN EN 16128:2016-02 | OPHTHALMIC OPTICS - REFERENCE METHOD FOR THE TESTING OF SPECTACLE FRAMES AND SUNGLASSES FOR NICKEL RELEASE |
DIN EN 15550:2017-10 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
UNI EN 13138-1 : 2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
EN 1131:1994 | Fruit and vegetable juices - Determination of the relative density |
DIN EN ISO 11644:2009-09 | Leather - Test for adhesion of finish (ISO 11644:2009) |
DIN EN ISO 3630-1:2008-04 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
EN 60661:2014 | Methods for measuring the performance of electric household coffee makers |
I.S. EN ISO 3107:2011 | DENTISTRY - ZINC OXIDE/EUGENOL CEMENTS AND ZINC OXIDE/NONEUGENOL CEMENTS |
EN 50414:2006 | Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining |
DIN ISO 13741-1:2003-04 | PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DETERMINATION OF RESIDUAL MONOMERS AND OTHER ORGANIC COMPONENTS BY CAPILLARY-COLUMN GAS CHROMATOGRAPHY - PART 1: DIRECT LIQUID INJECTION METHOD |
EN 12122:2005 | Chemicals used for treatment of water intended for human consumption - Ammonia solution |
EN 13267:2001 | Surface active agents - Determination of water content - Karl Fischer method |
DIN EN ISO 6744-2:2004-09 | Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999) |
EN 13194:2015 | Chemicals used for treatment of water intended for human consumption - Acetic Acid |
CEN ISO/TS 16189:2013 | Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials (ISO/TS 16189:2013) |
DIN EN 14345:2004-12 | Characterization of waste - Determination of hydrocarbon content by gravimetry; German version EN 14345:2004 |
CEN ISO/TS 17764-2:2006 | Animal feeding stuffs - Determination of the content of fatty acids - Part 2: Gas chromatographic method (ISO/TS 17764-2:2002) |
DIN EN ISO 11846:2008-08 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF SOLUTION HEAT-TREATABLE ALUMINIUM ALLOYS |
DIN EN ISO 5163:2014-10 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
DIN EN 891:2005-03 | Chemicals used for treatment of water intended for human consumption - Iron (III) chloride sulfate |
I.S. EN ISO 12185:1997 | CRUDE PETROLEUM AND PETROLEUM PRODUCTS - DETERMINATION OF DENSITY - OSCILLATING U-TUBE METHOD |
I.S. EN ISO 17294-1:2006 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
BS 3900-F8(1993) : 1993 AMD 9930 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
BS 684-2.13(1996) : 1996 AMD 10896 | METHODS OF ANALYSIS OF FATS AND FATTY OILS - OTHER METHODS - DETERMINATION OF IODINE VALUE |
BS 3900-F13(2002) : 2002 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES |
BS 2782-1.130B(1991) : 1991 AMD 10685 | METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE THERMAL STABILITY OF POLYVINYL CHLORIDE BY THE pH METHOD |
NBR ISO 22241-2 : 2011 | DIESEL ENGINES - NOX REDUCTION AGENT AUS 32 - PART 2: TEST METHODS |
ONORM EN 1405 : 2010 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM ALGINATE |
ENV 14194:2002 | Foodstuffs - Determination of saxitoxin and dc-saxitoxin in mussels - HPLC method using post column derivatisation |
ONORM EN 117 : 2012 | WOOD PRESERVATIVES - DETERMINATION OF TOXIC VALUES AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
NBR ISO 8536-4 : 2011 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
UNE-EN 16318:2015 | Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) |
CEI EN IEC 62321-3-4:2023 | Determination of certain substances in electrotechnical products Part 3-4: Screening - Phthalates in polymers of electrotechnical products by high performance liquid chromatography with ultraviolet detector (HPLCUV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS) |
UNE-EN 16320:2015 | Fertilizers - Determination of trace elements - Determination of mercury by vapour generation (VG) after aqua regia dissolution |
ONORM EN ISO 2811-3 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 3: OSCILLATION METHOD |
UNE-EN 15030:2013 | Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use |
I.S. EN ISO 3549:2002 | ZINC DUST PIGMENTS FOR PAINTS - SPECIFICATIONS AND TEST METHODS |
BS 5665-3(1995) : 1995 | SAFETY OF TOYS - PART 3: SPECIFICATION FOR MIGRATION OF CERTAIN ELEMENTS |
NS-EN ISO 12183:2024 | Nuclear fuel technology - Controlled-potential coulometric measurement of plutonium (ISO 12183:2024) |
BS 684-2.13(1990) : 1990 | METHODS OF ANALYSIS OF FATS AND FATTY OILS - OTHER METHODS - DETERMINATION OF IODINE VALUE |
AS 4276.22:2019 | Water microbiology Water quality - Enumeration of Escherichia coli and coliform bacteria - Membrane filtration method for waters with low bacterial background flora (ISO 9308-1:2014/Amd 1:2016, MOD) |
AS ISO 19976.2:2020 | Copper, lead and zinc sulfide concentrates - Determination of cadmium Acid digestion and inductively coupled plasma atomic emission spectrometric method |
AS ISO 19976.1:2020 | Copper, lead and zinc sulfide concentrates - Determination of cadmium Flame atomic absorption spectrometric method |
AS 3515.3:2019 | Gold and gold bearing alloys Determination of gold content (greater than 99.5 %) - Gravimetric (fire assay) method |
AS 5006.2:2019 | Silver and silver bearing alloys Determination of silver content (0.1 % to 99.9 %) - Gravimetric (fire assay) method |
AS/NZS 1301.421:2020 | Method of test for pulp and paper Paper, board and pulps - Determination of pH of aqueous extracts - Cold extraction |
AS 4439.3:2019 | Wastes, sediments and contaminated soils Preparation of leachates - Bottle leaching procedure |
AS/NZS 4760:2019 | Procedure for specimen collection and the detection and quantification of drugs in oral fluid |
AS/NZS ISO 8124.5:2020 | Safety of toys Chemical toys (sets) other than experimental sets |
AS 3515.1:2019 | Gold and gold bearing alloys Determination of gold content (less than 30%) - Gravimetric (fire assay) method |
AS 3515.2:2019 | Gold and gold bearing alloys Determination of gold content (30 % to 99.5 %) - Gravimetric (fire assay) method |
AS 4439.2:2019 | Wastes, sediments and contaminated soils Preparation of leachates - Zero headspace procedure |
AS/NZS 1301.422:2020 | Method of test for pulp and paper Paper, board and pulps - Determination of pH of aqueous extracts - Hot extraction |
AS 5006.1:2019 | Silver and silver bearing alloys Determination of silver content (0.1 % to 99.9 %) - Titrimetric (potentiometric) method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.