ISO/IEC Guide 98-3:2008
Current
Current
The latest, up-to-date edition.
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
30-09-2008
ISO/IEC Guide 98-3:2008 is a reissue of the 1995 version of the Guide to the Expression of Uncertainty in Measurement (GUM), with minor corrections. This Guide establishes general rules for evaluating and expressing uncertainty in measurement that can be followed at various levels of accuracy and in many fields — from the shop floor to fundamental research. The principles of this Guide are intended to be applicable to a broad spectrum of measurements, including those required for:
- maintaining quality control and quality assurance in production;
- complying with and enforcing laws and regulations;
- conducting basic research, and applied research and development, in science and engineering;
- calibrating standards and instruments and performing tests throughout a national measurement system in order to achieve traceability to national standards;
- developing, maintaining, and comparing international and national physical reference standards, including reference materials.
| Committee |
ISO/TMBG
|
| DevelopmentNote |
Supersedes ISO/IEC GUIDE 98. (09/2008) Supplement 1 is available separately, see ISO/IEC GUIDE 98-3 SUPP 1. (12/2008) Supplement 2 is available separately, see ISO/IEC GUIDE 98-3 SUPP 2. (11/2011) Supersedes RM.AERO 80312 & RM.AERO 80313. (05/2015)
|
| DocumentType |
Guide
|
| Pages |
121
|
| ProductNote |
THIS STANDARDS ALSO HAVE CORRECTED VERSION IN ENGLISH 2010. New child SUPP 2 2011 is now added.
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF ISO/IEC GUIDE 98-3 : 2014 | Identical |
| UNE-ISO/IEC GUIA 98-3:2012 IN | Identical |
| PKN-ISO/IEC Guide 98-3:2021-05 | Identical |
| 15/30293072 DC : 0 | BS EN ISO 6789-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHOD FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND CALIBRATION PROCEDURE |
| I.S. EN ISO 6142-1:2015 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES (ISO 6142-1:2015) |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| PREN ISO 6416 : DRAFT 2015 | HYDROMETRY - MEASUREMENT OF DISCHARGE BY THE ULTRASONIC TRANSIT TIME (TIME OF FLIGHT) METHOD (ISO/DIS 6416:2015) |
| BS ISO 20785-2 : 2011 | DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 2: CHARACTERIZATION OF INSTRUMENT RESPONSE |
| BS ISO 2889:2010 | Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities |
| CEI EN 62586-2 : 2015 | POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS |
| ISO/TS 17503:2015 | Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs |
| DIN ISO 9277:2014-01 | DETERMINATION OF THE SPECIFIC SURFACE AREA OF SOLIDS BY GAS ADSORPTION - BET METHOD (ISO 9277:2010) |
| FD ISO GUIDE 34 : 2010 FD | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| DIN EN 15980:2011-08 | Air quality - Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene |
| DIN ISO 21360-1:2016-09 | VACUUM TECHNOLOGY - STANDARD METHODS FOR MEASURING VACUUM-PUMP PERFORMANCE - PART 1: GENERAL DESCRIPTION (ISO 21360-1:2012) |
| PD CEN/TR 16338:2012 | Foodstuffs. Detection of food allergens. Template for supplying information about immunological methods and molecular biological methods |
| DIN EN ISO 6506-2:2016-04 (Draft) | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| BS EN 61788-6:2011 | Superconductivity Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors |
| 13/30294309 DC : 0 | BS ISO/CIE 19476 - CHARACTERIZATION OF THE PERFORMANCE OF ILLUMINANCE METERS AND LUMINANCE METERS |
| CEI EN 62209-2 : 2013 | HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ) |
| PD IEC/TS 62556:2014 | Ultrasonics. Field characterization. Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems |
| BS EN 12102:2013 | Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of the sound power level |
| CEI EN 61788-13 : 2013 | SUPERCONDUCTIVITY - PART 13: AC LOSS MEASUREMENTS - MAGNETOMETER METHODS FOR HYSTERESIS LOSS IN SUPERCONDUCTING MULTIFILAMENTARY COMPOSITES |
| DIN EN ISO 16610-22:2016-04 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015) |
| BS ISO 16063-45:2017 | Methods for the calibration of vibration and shock transducers In-situ calibration of transducers with built in calibration coil |
| DIN EN ISO 16610-61:2016-04 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS: GAUSSIAN FILTERS (ISO 16610-61:2015) |
| BS ISO 17211:2015 | Stationary source emissions. Sampling and determination of selenium compounds in flue gas |
| 17/30362443 DC : 0 | BS EN 407 - PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE) |
| DIN EN ISO 16610-85:2013-05 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013) |
| DKD-R 3-8 : 2010 | STATISCHE KALIBRIERUNG VON KALIBRIEREINRICHTUNGEN FUER DREHMOMENTSCHRAUBWERKZEUGE |
| BS EN ISO 6145-5:2010 | Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Capillary calibration devices |
| 13/30287730 DC : 0 | BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS |
| 15/30286366 DC : 0 | BS ISO 19030-1 - SHIPS AND MARINE TECHNOLOGY - MEASUREMENT OF CHANGES IN HULL AND PROPELLER PERFORMANCE - PART 1: GENERAL PRINCIPLES |
| UNE-EN ISO 11665-5:2016 | Measurement of radioactivity in the environment -Air: radon-222 - Part 5: Continuous measurement method of the activity concentration (ISO 11665-5:2012) |
| UNE 206014:2017 | Tests for the determination of the solar field efficiency of solar thermal power plants with parabolic trough collector technology |
| 13/30258884 DC : 0 | BS ISO 11665-10 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON 222 - PART 10: DETERMINATION OF THE DIFFUSION COEFFICIENT IN WATERPROOF MATERIALS USING ACTIVITY CONCENTRATION MEASUREMENT |
| 10/30215322 DC : 0 | BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| BS ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| PD ISO/TR 14345:2012 | Fatigue. Fatigue testing of welded components. Guidance |
| BS ISO 16840-2:2018 | Wheelchair seating Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity |
| 13/30254352 DC : 0 | BS ISO 50015 - MEASUREMENT AND VERIFICATION OF ORGANIZATIONAL ENERGY PERFORMANCE - GENERAL PRINCIPLES AND GUIDANCE |
| S.R. CEN/TR 1030-2:2016 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE |
| BS ISO 7503-1:2016 | Measurement of radioactivity. Measurement and evaluation of surface contamination General principles |
| EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
| 12/30255465 DC : 0 | BS ISO 12999-1 - ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION |
| CEI EN 61746-2 : 2012 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
| BS EN 60154-2:2016 | Flanges for waveguides Relevant specifications for flanges for ordinary rectangular waveguides |
| I.S. EN ISO 16610-61:2015 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS - GAUSSIAN FILTERS (ISO 16610-61:2015) |
| BS EN 62475:2010 | High-current test techniques. Definitions and requirements for test currents and measuring systems |
| BS EN 31010:2010 | Risk management. Risk assessment techniques |
| ISO/TS 20175:2018 | Vacuum technology — Vacuum gauges — Characterization of quadrupole mass spectrometers for partial pressure measurement |
| ISO 24496:2017 | Office furniture Office chairs Methods for the determination of dimensions |
| ECA 10-15 : 2015 | GUIDELINES ON THE CALIBRATION OF DIGITAL MULTIMETERS |
| BS EN 60318-3:2015 | Electroacoustics. Simulators of human head and ear Acoustic coupler for the calibration of supra-aural earphones used in audiometry |
| BS ISO 11665-1 : 2012 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 1: ORIGINS OF RADON AND ITS SHORT-LIVED DECAY PRODUCTS AND ASSOCIATED MEASUREMENT METHODS |
| BS EN 62607-3-1:2014 | Nanomanufacturing. Key control characteristics Luminescent nanomaterials. Quantum efficiency |
| BS EN ISO/IEC 17043:2010 | Conformity assessment. General requirements for proficiency testing |
| 14/30286829 DC : 0 | BS ISO 12749-4 - NUCLEAR ENERGY, NUCLEAR TECHNOLOGIES, AND RADIOLOGICAL PROTECTION - VOCABULARY - PART 4: DOSIMETRY FOR RADIATION PROCESSING |
| 14/30289065 DC : 0 | BS ISO 17534-1 - ACOUSTICS - SOFTWARE FOR THE CALCULATION OF SOUND OUTDOORS - PART 1: QUALITY REQUIREMENTS AND QUALITY ASSURANCE |
| 17/30341492 DC : 0 | BS ISO 20391-1 - BIOTECHNOLOGY - CELL COUNTING - PART 1: GENERAL GUIDANCE ON CELL COUNTING METHODS |
| 17/30347199 DC : 0 | BS EN ISO 204 - METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
| BS ISO 2469:2014 | Paper, board and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor) |
| BS EN 1793-6:2012 | Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions |
| DIN EN ISO 8041-1:2017-10 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION - PART 1: GENERAL PURPOSE VIBRATION METERS (ISO 8041-1:2017) |
| UNI CEI CEN/TR 16469 : 2014 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
| 13/30214514 DC : 0 | BS ISO 6145-2 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC METHODS - PART 2: VOLUMETRIC PUMPS |
| BS EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Requirements for measuring instruments |
| EN ISO 19238:2017 | Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics (ISO 19238:2014) |
| I.S. EN ISO 14720-1:2013 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS (ISO 14720-1:2013) |
| DIN EN ISO 12999-1 E : 2014 | ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION (ISO 12999-1:2014) |
| 14/30284635 DC : 0 | BS ISO 11665-11 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 11: TEST METHOD FOR SOIL GAS WITH SAMPLING AT DEPTH |
| 16/30332792 DC : DRAFT APR 2016 | BS EN ISO 2360 - NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD |
| 16/30313874 DC : 0 | BS ISO 4094 - PAPER, BOARD, AND PULPS - GENERAL REQUIREMENTS FOR THE COMPETENCE OF LABORATORIES AUTHORIZED FOR THE ISSUE OF OPTICAL REFERENCE TRANSFER STANDARDS OF LEVEL 3 |
| BS ISO 19238 : 2014 | RADIOLOGICAL PROTECTION - PERFORMANCE CRITERIA FOR SERVICE LABORATORIES PERFORMING BIOLOGICAL DOSIMETRY BY CYTOGENETICS |
| BS ISO 18946:2011 | Imaging materials. Reflection colour photographic prints. Method for testing humidity fastness |
| BS EN 61674:2013 | Medical electrical equipment. Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| ISO/TR 17243-2:2017 | Machine tool spindles Evaluation of spindle vibrations by measurements on non-rotating parts Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min |
| 15/30280916 DC : 0 | BS ISO 22262-3 - AIR QUALITY - BULK MATERIALS - PART 3: QUANTITATIVE DETERMINATION OF ASBESTOS BY X-RAY DIFFRACTION METHOD |
| BS EN 50379-2:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Performance requirements for apparatus used in statutory inspections and assessment |
| UNI EN ISO 80601-2-61 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
| ISO 26101:2017 | Acoustics Test methods for the qualification of free-field environments |
| BS EN ISO 25139:2011 | Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography |
| 16/30341458 DC : 0 | BS ISO 16063-45 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 45: IN-SITU CALIBRATION OF TRANSDUCERS WITH BUILT IN CALIBRATION COIL |
| BS EN ISO 80601-2-61:2011 | Medical electrical equipment Particular requirements for basic safety and essential performance of pulse oximeter equipment |
| 13/30265648 DC : 0 | BS ISO 22514-8 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 8: MACHINE PERFORMANCE OF A MULTI-STATES PRODUCTION PROCESS |
| BS EN 19694-3:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries Cement industry |
| 10/30186202 DC : 0 | BS ISO 11665-7 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 7: RADON-222: SPOT MEASUREMENT METHODS OF RADON ACTIVITY CONCENTRATION IN THE ATMOSPHERIC ENVIRONMENT |
| BS EN ISO 16000-26:2012 | Indoor air Sampling strategy for carbon dioxide (CO<sub>2</sub>) |
| 09/30118876 DC : 0 | ISO 20785-2 - DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 2: CHARACTERIZATION OF INSTRUMENT RESPONSE |
| 15/30293075 DC : 0 | BS EN ISO 6789-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINTY |
| 16/30266428 DC : DRAFT MAR 2016 | BS EN ISO 6145-6 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC METHODS - PART 6: CRITICAL FLOW ORIFICES |
| I.S. EN ISO 14720-2:2013 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW (ISO 14720-2:2013) |
| BS ISO 21438-3:2010 | Workplace atmospheres. Determination of inorganic acids by ion chromatography Hydrofluoric acid and particulate fluorides |
| BS ISO 16638-1 : 2015 COR 2017 | RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS |
| BS ISO 18941:2017 | Imaging materials. Colour reflection prints. Test method for ozone gas fading stability |
| DIN EN ISO 16610-21:2013-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011) |
| PD ISO/TS 17503:2015 | Statistical methods of uncertainty evaluation. Guidance on evaluation of uncertainty using two-factor crossed designs |
| DIN ISO 16000-6:2012-11 | Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA? sorbent, thermal desorption and gas chromatography using MS or MS-FID (ISO 16000-6:2011) |
| BS ISO 15042:2017 | Multiple split-system air conditioners and air-to-air heat pumps. Testing and rating for performance |
| OIML G 1-106 : 2012 | EVALUATION OF MEASUREMENT DATA - THE ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT |
| PD CEN ISO/TS 16491:2012 | Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests |
| 17/30355564 DC : 0 | BS EN 61869-13 ED.1.0 - INSTRUMENT TRANSFORMERS - PART 13: STAND-ALONE MERGING UNIT |
| I.S. EN ISO 1938-2:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| PD IEC/TS 62600-200:2013 | Marine energy. Wave, tidal and other water current converters Electricity producing tidal energy converters. Power performance assessment |
| PD CEN/TR 1030-2:2016 | Hand-arm vibration. Guidelines for vibration hazards reduction Management measures at the workplace |
| BS ISO 6107-2 : 2006 | WATER QUALITY - VOCABULARY - PART 2 |
| BS EN ISO 19238:2017 | Radiological protection. Performance criteria for service laboratories performing biological dosimetry by cytogenetics |
| SAE AIR 6504 : 2017 | PROCEDURE FOR THE CALCULATION OF NON-VOLATILE PARTICULATE MATTER SAMPLING AND MEASUREMENT SYSTEM PENETRATION FUNCTIONS AND SYSTEM LOSS CORRECTION FACTORS |
| BS ISO 27894:2009 | Vacuum technology. Vacuum gauges. Specifications for hot cathode ionization gauges |
| CSA Z24510 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS |
| 12/30249815 DC : 0 | BS ISO 230-2 - TEST CODE FOR MACHINE TOOLS - PART 2: DETERMINATION OF ACCURACY AND REPEATABILITY OF POSITIONING OF NUMERICALLY CONTROLLED AXES |
| ISO/TS 19159-1:2014 | Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 1: Optical sensors |
| ISO/TR 14253-6:2012 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces |
| BS ISO 22262-3:2016 | Air quality. Bulk materials Quantitative determination of asbestos by X-ray diffraction method |
| BS ISO 3846:2008 | Hydrometry. Open channel flow measurement using rectangular broad-crested weirs |
| ISO/ASTM 51276:2012 | Practice for use of a polymethylmethacrylate dosimetry system |
| I.S. EN ISO 16911-1:2013 | STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD (ISO 16911-1:2013) |
| ISO 362-2:2009 | Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 2: L category |
| BS ISO 27048:2011 | Radiation protection. Dose assessment for the monitoring of workers for internal radiation exposure |
| 14/30281850 DC : 0 | BS EN ISO 2178 - NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD |
| EN 61577-2:2017 | Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments |
| BS ISO 29661 : 2012 | REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS |
| ISO/TR 16268:2009 | Surface chemical analysis Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation |
| MIL-PRF-31032 Revision C:2016 | Printed Circuit Board/Printed Wiring Board, General Specification for |
| BS ISO 22514-8:2014 | Statistical methods in process management. Capability and performance Machine performance of a multi-state production process |
| DKD-R 6-2-1 : 2002 | |
| BS EN ISO 16610-71:2014 | Geometrical product specifications (GPS). Filtration Robust areal filters: Gaussian regression filters |
| PD ISO/TR 17243-1:2014 | Machine tool spindles. Evaluation of machine tool spindle vibrations by measurements on spindle housing Spindles with rolling element bearings and integral drives operating at speeds between 600 min<sup>-1</sup> and 30 000 min<sup>-1</sup> |
| BS ISO 20233-1:2018 | Ships and marine technology. Model test method for propeller cavitation noise evaluation in ship design Source level estimation |
| 10/30210537 DC : DRAFT JUNE 2010 | BS ISO 18132-1 - REFRIGERATED HYDROCARBON FLUIDS AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK GAUGES - PART 1: AUTOMATIC TANK GAUGES FOR LIQUEFIED NATURAL GAS ON BOARD MARINE CARRIERS AND FLOATING STORAGE |
| BS EN 50564:2011 | Electrical and electronic household and office equipment. Measurement of low power consumption |
| 17/30285147 DC : 0 | BS ISO 18326 - SINGLE-DUCT PORTABLE AIRCONDITIONERS AND HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| BS EN 62282-3-200:2016 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| BS EN ISO 10360-10:2016 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers for measuring point-to-point distances |
| 15/30327269 DC : 0 | BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| BS ISO 13168:2015 | Water quality. Simultaneous determination of tritium and carbon 14 activities. Test method using liquid scintillation counting |
| I.S. EN ISO 16610-71:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-71:2014) |
| ISO 16405:2015 | Room corner and open calorimeter Guidance on sampling and measurement of effluent gas production using FTIR technique |
| BS IEC 62232:2011 | Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure |
| BS ISO 11704 : 2010 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD |
| BS ISO 19970:2017 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Metering of gas as fuel on LNG carriers during cargo transfer operations |
| 15/30321297 DC : 0 | BS EN 1793-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| 16/30342722 DC : 0 | BS ISO 19703 - GENERATION AND ANALYSIS OF TOXIC GASES IN FIRE - CALCULATION OF SPECIES YIELDS, EQUIVALENCE RATIOS AND COMBUSTION EFFICIENCY IN EXPERIMENTAL FIRES |
| 16/30332952 DC : 0 | BS ISO 14146 - RADIATION PROTECTION - CRITERIA AND PERFORMANCE LIMITS FOR THE PERIODIC EVALUATION OF DOSIMETRY SERVICES |
| BS EN ISO 10703:2015 | Water quality. Determination of the activity concentration of radionuclides. Method by high resolution gamma-ray spectrometry |
| I.S. EN 19694-6:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 6: FERROALLOY INDUSTRY |
| 17/30344792 DC : 0 | BS EN 61788-24 - SUPERCONDUCTIVITY - PART 24: CRITICAL CURRENT MEASUREMENT - RETAINED CRITICAL CURRENT AFTER DOUBLE BENDING AT ROOM TEMPERATURE OF AG-SHEATHED BI-2223 SUPERCONDUCTING WIRES |
| 09/30191459 DC : 0 | BS ISO 16063-41 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 41: CALIBRATION OF LASER VIBROMETERS |
| PREN 50563 : DRAFT 2011 | EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES |
| DIN EN ISO 22476-5:2013-03 | Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012) |
| CEI EN 60904-4 : 2010 | PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION TRACEABILITY |
| BS ISO 11382:2010 | Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 μm to 25 μm |
| I.S. EN ISO 9696:2017 | WATER QUALITY - GROSS ALPHA ACTIVITY - TEST METHOD USING THICK SOURCE (ISO 9696:2017) |
| 17/30341082 DC : 0 | BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| DIN EN ISO 27971:2015-11 | Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015) |
| DIN ISO 24173:2013-04 | MICROBEAM ANALYSIS - GUIDELINES FOR ORIENTATION MEASUREMENT USING ELECTRON BACKSCATTER DIFFRACTION (ISO 24713:2009) |
| BS 17898:2014 | Code of practice for the management of observed hydrometric data |
| PD IEC/TS 62941:2016 | Terrestrial photovoltaic (PV) modules. Guidelines for increased confidence in PV module design qualification and type approval |
| ISO 17736:2010 | Workplace air quality Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography |
| UNE-EN 15852:2010 | Ambient air quality - Standard method for the determination of total gaseous mercury |
| DIN EN 15991:2016-02 | TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV) |
| 16/30333694 DC : 0 | BS EN ISO 14253-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS |
| 17/30319520 DC : 0 | BS ISO 20289 - SURFACE CHEMICAL ANALYSIS - TOTAL REFLECTION X-RAY FLUORESCENCE ANALYSIS OF WATER SAMPLES |
| BS EN 61757-1:2012 | Fibre optic sensors Generic specification |
| 11/30218527 DC : 0 | BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS |
| BS EN ISO 15971:2014 | Natural gas. Measurement of properties. Calorific value and Wobbe index |
| 15/30318694 DC : 0 | BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD |
| DIN EN ISO 17450-2:2013-04 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| DIN EN ISO 13473-5:2010-04 | Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009) |
| UNE 83321:2017 EX | Concrete with photocatalytic activity. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials. Continuous flow test method |
| BS ISO/IEC 18047-2:2012 | Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications below 135 kHz |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| UNE-EN 50383:2011 | Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz) |
| FD X07 023 : 2012 FD | METROLOGIE - EVALUATION DE L'INCERTITUDE DE MESURE PAR LA METHODE MONTE CARLO - PRINCIPES ET MISE EN OEUVRE DU SUPPLEMENT 1 AU GUM |
| ASTM E 170 : 2017 : REDLINE | Standard Terminology Relating to Radiation Measurements and Dosimetry |
| DIN EN ISO 13199:2013-02 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOCS) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED ANALYSER EQUIPPED WITH CATALYTIC CONVERTER (ISO 13199:2012) |
| DIN EN ISO 80000-1:2013-08 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| 10/30238725 DC : 0 | BS EN 60469 - TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS |
| CEI EN 62522 : 2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
| ISO 16494:2014 | Heat recovery ventilators and energy recovery ventilators Method of test for performance |
| 11/30227624 DC : 0 | BS EN ISO 14720-2 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP/AES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW |
| CEI EN 61000-4-22 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-22: TESTING AND MEASUREMENT TECHNIQUES - RADIATED EMISSION AND IMMUNITY MEASUREMENTS IN FULLY ANECHOIC ROOMS (FARS) |
| 14/30287226 DC : 0 | BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| 12/30248590 DC : 0 | BS ISO 14577-3 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| BS EN ISO 6145-6:2017 | Gas analysis. Preparation of calibration gas mixtures using dynamic methods Critical flow orifices |
| BS EN ISO 16859-1:2015 | Metallic materials. Leeb hardness test Test method |
| 10/30217545 DC : 0 | BS EN 61674 - MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING |
| BS ISO/IEC 18046-2:2011 | Information technology. Radio frequency identification device performance test methods Test methods for interrogator performance |
| CEI EN 61094-3 : 1997 | ELECTROACOUSTICS - MEASUREMENT MICROPHONES - PART 3: PRIMARY METHOD FOR FREE-FIELD CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE |
| CEI EN 62479 : 2013 | ASSESSMENT OF THE COMPLIANCE OF LOW POWER ELECTRONIC AND ELECTRICAL EQUIPMENT WITH THE BASIC RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (10 MHZ - 300 GHZ) |
| DIN ISO 22309:2015-11 | MICROBEAM ANALYSIS - QUANTITATIVE ANALYSIS USING ENERGY-DISPERSIVE SPECTROMETRY (EDS) FOR ELEMENTS WITH AN ATOMIC NUMBER OF 11 (NA) OR ABOVE (ISO 22309:2011) |
| BS ISO 13164-3:2013 | Water quality. Radon-222 Test method using emanometry |
| BS EN 50380:2017 | Marking and documentation requirements for Photovoltaic Modules |
| 10/30179537 DC : 0 | BS ISO 11665-1 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 1: RADON-222 AND ITS SHORT-LIVED DECAY PRODUCTS IN THE ATMOSPHERIC ENVIRONMENT: THEIR ORIGINS AND MEASUREMENT METHODS |
| NF EN ISO 17201-5 : 2010 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 5: NOISE MANAGEMENT |
| CEI EN 61577-2 : 1ED 2018 | RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS |
| 15/30297958 DC : 0 | BS EN 62271-100 ED 2.0 /A2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING CURRENT CIRCUIT-BREAKERS |
| 10/30201940 DC : 0 | ISO/DIS 13162 - WATER QUALITY - DETERMINATION OF CARBON 14 ACTIVITY - LIQUID SCINTILLATION COUNTING METHOD |
| 13/30277795 DC : 0 | BS EN ISO 17892-1 - GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 1: DETERMINATION OF WATER CONTENT (CONVERSION OF CEN ISO TS 17892-1 INTO EN) |
| BS EN ISO 6142-1:2015 | Gas analysis. Preparation of calibration gas mixtures Gravimetric method for Class I mixtures |
| BS EN ISO 16664:2017 | Gas analysis. Handling of calibration gases and gas mixtures. Guidelines |
| BS EN 16211:2015 | Ventilation for buildings. Measurement of air flows on site. Methods |
| PD ISO/TR 17243-2:2017 | Machine tool spindles. Evaluation of spindle vibrations by measurements on non-rotating parts Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min |
| BS IEC 61577-2 : 2014 | RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS |
| 12/30251712 DC | BS ISO/ASTM 52116. Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator |
| BS EN 12405-2:2012 | Gas meters. Conversion devices Energy conversion |
| 15/30284307 DC : 0 | BS ISO 5151 - NON-DUCTED AIR CONDITIONERS AND HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| 09/30151431 DC : 0 | BS ISO 27048 - RADIATION PROTECTION - DOSE ASSESSMENT FOR THE MONITORING OF WORKERS FOR INTERNAL RADIATION EXPOSURE |
| 09/30201391 DC : 0 | BS EN 55016-4-2 ED.2 - SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY |
| BS ISO 13474:2009 | Acoustics. Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment |
| DIN ISO 13472-2:2010-12 | Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces (ISO 13472-2:2010) |
| BS ISO 18589-6:2009 | Measurement of radioactivity in the environment. Soil Measurement of gross alpha and gross beta activities |
| ISO Guide 31:2015 | Reference materials — Contents of certificates, labels and accompanying documentation |
| 10/30200748 DC : 0 | BS ISO 13160 - WATER QUALITY - MEASUREMENT OF STRONTIUM 90 AND STRONTIUM 89 |
| PD IEC/TS 62886:2016 | Electroacoustics. Hearing aids. Method for measuring electroacoustic performance up to 16 kHz |
| BS EN ISO 9493:2010 | Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics |
| BS EN ISO 14253-3:2011 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements |
| CSA ISO/IEC TR 18047-6 : 2013 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 6: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ |
| BS ISO 4377:2012 | Hydrometric determinations. Flow measurement in open channels using structures. Flat-V weirs |
| UNE-EN 60645-6:2010 | Electroacoustics - Audiometric equipment -- Part 6: Instruments for the measurement of otoacoustic emissions |
| ISO 20233-1:2018 | Ships and marine technology — Model test method for propeller cavitation noise evaluation in ship design — Part 1: Source level estimation |
| UNE-EN ISO 16641:2016 | Measurement of radioactivity in the environment - Air - Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors (ISO 16641:2014) |
| 13/30275218 DC : 0 | BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE |
| 11/30217430 DC : 0 | BS EN 60404-15 - MAGNETIC MATERIALS - PART 15: - METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS |
| 14/30268531 DC : 0 | BS EN ISO 6892-1 - METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE |
| BS ISO 6145-2:2014 | Gas analysis. Preparation of calibration gas mixtures using dynamic methods Piston pumps |
| BS EN ISO 6789-1:2017 | Assembly tools for screws and nuts. Hand torque tools Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance |
| BS EN ISO 389-9:2009 | Acoustics. Reference zero for the calibration of audiometric equipment Preferred test conditions for the determination of reference hearing threshold levels |
| 13/30264462 DC : 0 | BS EN ISO 6508-1 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 1: TEST METHOD |
| BS ISO 11665-7 : 2012 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 7: ACCUMULATION METHOD FOR ESTIMATING SURFACE EXHALATION RATE |
| EN 71-1:2014 | Safety of toys - Part 1: Mechanical and physical properties |
| PREN 16002 : DRAFT 2016 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING |
| 13/30214533 DC : 0 | BS ISO 14385-2 - STATIONARY SOURCE EMISSIONS - GREEN HOUSE GASES - PART 2: ONGOING QUALITY CONTROL OF AUTOMATED MEASURING SYSTEMS |
| 16/30295054 DC : DRAFT APR 2016 | BS ISO 12963 - GAS ANALYSIS - COMPARISON METHODS FOR THE DETERMINATION OF THE COMPOSITION OF GAS MIXTURES BASED ON ONE- AND TWO-POINT CALIBRATION |
| 16/30313383 DC : 0 | BS ISO 19970 - REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - METERING OF GAS AS FUEL ON LNG CARRIERS DURING CARGO TRANSFER OPERATIONS |
| BS EN 62047-26:2016 | Semiconductor devices. Micro-electromechanical devices Description and measurement methods for micro trench and needle structures |
| PD CEN/TR 16193:2013 | Sludge, treated biowaste and soil. Detection and enumeration of Escherichia coli |
| 15/30314073 DC : 0 | BS 16913 - AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 |
| BS EN ISO 22476-5:2012 | Geotechnical investigation and testing. Field testing Flexible dilatometer test |
| 16/30344762 DC : 0 | BS EN 62442-1 ED1.0/A1 - ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 1: CONTROLGEAR FOR FLUORESCENT LAMPS - METHOD OF MEASUREMENT TO DETERMINE THE TOTAL INPUT POWER OF CONTROLGEAR CIRCUITS AND THE EFFICIENCY OF THE CONTROLGEAR |
| 14/30274825 DC : 0 | BS ISO 7503-2 - MEASUREMENT OF RADIOACTIVITY - MEASUREMENT AND E EVALUATION OF SURFACE CONTAMINATION - PART 2: TEST METHOD USING WIPE-TEST SAMPLES |
| I.S. EN ISO 25178-70:2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| BS EN ISO 3611:2010 | Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics |
| BS ISO 1438:2017 | Hydrometry. Open channel flow measurement using thin-plate weirs |
| 17/30355634 DC : 0 | BS EN 62311 ED.2.0 - ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| UNE-EN 15980:2011 | Air quality - Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene |
| ASTM E 1834 : 2011 | Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
| 18/30368158 DC : 0 | BS EN 50413 - BASIC STANDARD ON MEASUREMENT AND CALCULATION PROCEDURES FOR HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| PD ISO/IEC TR 18047-6:2011 | Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications at 860 MHz to 960 MHz |
| BS ISO 22514-1:2014 | Statistical methods in process management. Capability and performance General principles and concepts |
| BS ISO 9697 : 2015 | WATER QUALITY - GROSS BETA ACTIVITY IN NON-SALINE WATER - TEST METHOD USING THICK SOURCE |
| 16/30334810 DC : 0 | BS EN 62751-1:2014/A1 - POWER LOSSES IN VOLTAGE SOURCED CONVERTER (VSC) VALVES FOR HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 12/30255984 DC : 0 | BS ISO 16405 - MEASUREMENT OF TOXIC GAS PRODUCTION USING FTIR TECHNIQUE FOR ROOM CORNER TEST AND OPEN CALORIMETRY |
| 15/30326444 DC : 0 | BS EN 60942 - ELECTROACOUSTICS - SOUND CALIBRATORS |
| 15/30331502 DC : DRAFT DEC 2015 | BS EN ISO 9696 - WATER QUALITY - MEASUREMENT OF GROSS ALPHA ACTIVITY IN NON-SALINE WATER - THICK SOURCE METHOD |
| BS ISO 16269-6:2014 | Statistical interpretation of data Determination of statistical tolerance intervals |
| BS EN 62387:2016 | Radiation protection instrumentation. Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation |
| UNI EN ISO 14064-1 : 2012 | GREENHOUSE GASES - PART 1: SPECIFICATION WITH GUIDANCE AT THE ORGANIZATION LEVEL FOR QUANTIFICATION AND REPORTING OF GREENHOUSE GAS EMISSIONS AND REMOVALS |
| BS EN 61260-1:2014 | Electroacoustics. Octave-band and fractional-octave-band filters Specifications |
| I.S. EN 16211:2015 | VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| PD ISO/IEC TR 18047-7:2010 | Information technology. Radio frequency identification device conformance test methods Test methods for active air interface communications at 433 MHz |
| EN 61000-4-31:2017 | Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test |
| BS EN 61672-3:2013 | Electroacoustics. Sound level meters Periodic tests |
| PREN 1793-2 : DRAFT 2016 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 2: INTRINSIC CHARACTERISTICS OF AIRBORNE SOUND INSULATION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| BS ISO 17089-1:2019 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| EN ISO 13162:2015 | Water quality - Determination of carbon 14 activity - Liquid scintillation counting method (ISO 13162:2011) |
| CEI EN 61746-1 : 2012 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES |
| NF EN ISO 13473-5 : 2010 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
| ISO 6789-2:2017 | Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainty |
| BS ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| PREN ISO 11200 : DRAFT 2012 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012) |
| BS EN 61788-13:2012 | Superconductivity AC loss measurements. Magnetometer methods for hysteresis loss in superconducting multifilamentary composites |
| ISO 16966:2013 | Nuclear energy — Nuclear fuel technology — Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors |
| BS EN 60118-0:2015 | Electroacoustics. Hearing aids Measurement of the performance characteristics of hearing aids |
| UNE-EN ISO 17450-2:2015 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| UNE-ISO 7504:2016 | Gas analysis. Vocabulary |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| UNI EN ISO 21258 : 2010 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE (N[2]O) - REFERENCE METHOD: NON-DISPERSIVE INFRARED METHOD |
| CSA N288.5 : 2011 : R2016 | EFFLUENT MONITORING PROGRAMS AT CLASS 1 NUCLEAR FACILITIES AND URANIUM MINES AND MILLS |
| ISO/PAS 17208-1:2012 | Acoustics Quantities and procedures for description and measurement of underwater sound from ships Part 1: General requirements for measurements in deep water |
| BS EN 61788-12:2013 | Superconductivity Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb<sub>3</sub>Sn composite superconducting wires |
| UNE-EN 12405-1:2006 | Gas meters - Conversion devices - Part 1: Volume conversion |
| ASHRAE GUIDELINE 2 : 2010 | ENGINEERING ANALYSIS OF EXPERIMENTAL DATA |
| CEI EN 61083-2 : 2014 | INSTRUMENTS AND SOFTWARE USED FOR MEASUREMENT IN HIGH-VOLTAGE AND HIGH-CURRENT TESTS - PART 2: REQUIREMENTS FOR SOFTWARE FOR TESTS WITH IMPULSE VOLTAGES AND CURRENTS |
| EN 61400-12-1:2017 | Wind energy generation systems - Part 12-1: Power performance measurement of electricity producing wind turbines |
| ISO 12354-1:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms |
| CEI EN 61788-5 : 2014 | SUPERCONDUCTIVITY - PART 5: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO SUPERCONDUCTOR VOLUME RATIO OF CU/NB-TI COMPOSITE SUPERCONDUCTING WIRES |
| 08/30169333 DC : DRAFT MAR 2008 | BS ISO 13225-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS; HEIGHT GAUGES - PART 1: SIMPLE HEIGHT GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
| UNE-EN ISO 25178-602:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| I.S. EN ISO 13199:2012 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOCS) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED ANALYSER EQUIPPED WITH CATALYTIC CONVERTER (ISO 13199:2012) |
| I.S. EN ISO 4373:2008 | HYDROMETRY - WATER LEVEL MEASURING DEVICES |
| CSA ISO/IEC TR 18047-7 : 2012 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 7: TEST METHODS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZ |
| ISO 21438-3:2010 | Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 3: Hydrofluoric acid and particulate fluorides |
| I.S. EN ISO 80000-1:2013 | QUANTITIES AND UNITS - PART 1: GENERAL (ISO 80000-1:2009 + COR 1:2011) |
| CSA ISO/IEC TR 18047-4 : 2005 : R2010 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 4: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 2,45 GHZ |
| API MPM TR 2570 : 2010 | CONTINUOUS ON-LINE MEASUREMENT OF WATER CONTENT IN PETROLEUM (CRUDE OIL AND CONDENSATE) |
| DIN EN ISO 13161:2016-01 | Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011) |
| CSA N292.5 : 2011 : R2016 | GUIDELINE FOR THE EXEMPTION OR CLEARANCE FROM REGULATORY CONTROL OF MATERIALS THAT CONTAIN, OR POTENTIALLY CONTAIN, NUCLEAR SUBSTANCES |
| CSA ISO 14064-1 : 2006 : R2016 | GREENHOUSE GASES - PART 1: SPECIFICATION WITH GUIDANCE AT THE ORGANIZATION LEVEL FOR QUANTIFICATION AND REPORTING OF GREENHOUSE GAS EMISSIONS AND REMOVALS |
| ISO 9698:2010 | Water quality Determination of tritium activity concentration Liquid scintillation counting method |
| I.S. EN ISO 18589-7:2016 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 7: IN SITU MEASUREMENT OF GAMMA-EMITTING RADIONUCLIDES (ISO 18589-7:2013) |
| ISO 9697:2015 | Water quality Gross beta activity in non-saline water Test method using thick source |
| IEC TR 61000-1-6:2012 | Electromagnetic compatibility (EMC) - Part 1-6: General - Guide to the assessment of measurement uncertainty |
| ISO 12764:2017 | Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
| CSA C61400-11 : 2007 : R2012 | WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| NF ISO 13161 : 2011 | WATER QUALITY - MEASUREMENT OF POLONIUM 210 ACTIVITY CONCENTRATION IN WATER BY ALPHA SPECTROMETRY |
| EN ISO 20785-2:2017 | Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011) |
| CEI EN 61000-4-6 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
| BS ISO 532-1:2017 | Acoustics. Methods for calculating loudness Zwicker method |
| IES LM 79 : 2008 | ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF SOLID-STATE LIGHTING PRODUCTS |
| I.S. EN 19694-1:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS |
| ISO/IEC TR 18047-3:2011 | Information technology Radio frequency identification device conformance test methods Part 3: Test methods for air interface communications at 13,56 MHz |
| I.S. EN 62555:2014 | ULTRASONICS - POWER MEASUREMENT - HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) TRANSDUCERS AND SYSTEMS |
| ISO 3846:2008 | Hydrometry Open channel flow measurement using rectangular broad-crested weirs |
| ISO 13163:2013 | Water quality Lead-210 Test method using liquid scintillation counting |
| ISO/TS 19159-2:2016 | Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 2: Lidar |
| ASTM E 2859 : 2011 | Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy |
| ISO 22514-7:2012 | Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
| ISO 14934-1:2010 | Fire tests Calibration and use of heat flux meters Part 1: General principles |
| ISO 25178-71:2017 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards |
| CEN/TR 16988:2016 | Estimation of uncertainty in the single burning item test |
| I.S. EN 60645-7:2010 | ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 7: INSTRUMENTS FOR THE MEASUREMENT OF AUDITORY BRAINSTEM RESPONSES |
| ISO 13164-3:2013 | Water quality — Radon-222 — Part 3: Test method using emanometry |
| I.S. EN 60456:2016 | CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| BIS IS 1500-1 : 2013 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD |
| I.S. EN 61280-4-2:2014 | FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT |
| ISO/TR 13519:2012 | Guidance on the development and use of ISO statistical publications supported by software |
| ASTM E 3061 : 2017 | Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method) |
| I.S. EN ISO 12999-1:2014 | ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION (ISO 12999-1:2014) |
| CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| ASTM D 6061 : 2001 : R2018 : EDT 1 | Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| I.S. EN 19694-2:2016 | STATIONARY SOURCE EMISSIONS - GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 2: IRON AND STEEL INDUSTRY |
| S.R. CEN/TR 16193:2013 | SLUDGE, TREATED BIOWASTE AND SOIL - DETECTION AND ENUMERATION OF ESCHERICHIA COLI |
| ISO 20903:2011 | Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Methods used to determine peak intensities and information required when reporting results |
| I.S. EN ISO 13138:2012 | AIR QUALITY - SAMPLING CONVENTIONS FOR AIRBORNE PARTICLE DEPOSITION IN THE HUMAN RESPIRATORY SYSTEM (ISO 13138:2012) |
| CEI EN 61215-1 : 1ED 2017 | TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 1: TEST REQUIREMENTS |
| I.S. EN ISO 6789-1:2017 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHODS FOR DESIGN CONFORMANCE TESTING AND QUALITY CONFORMANCE TESTING: MINIMUM REQUIREMENTS FOR DECLARATION OF CONFORMANCE (ISO 6789-1:2017) |
| PD IEC/TR 61282-14:2016 | Fibre optic communication system design guides Determination of the uncertainties of attenuation measurements in fibre plants |
| I.S. EN ISO 9698:2015 | WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD (ISO 9698:2010) |
| ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| BS EN 1793-5:2016 | Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound reflection under direct sound field conditions |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| BS EN 62127-1 : 2007 | ULTRASONICS - HYDROPHONES - PART 1: MEASUREMENT AND CHARACTERIZATION OF MEDICAL ULTRASONIC FIELDS UP TO 40 MHZ |
| S.R. CEN/TR 17055:2017 | WORKPLACE EXPOSURE - MEASUREMENT OF CHEMICAL AGENTS COMPLYING WITH THE REQUIREMENTS GIVEN IN EN 482 AND EITHER ONE OF EN 838, EN 1076, EN 13205, EN 13890 AND EN 13936 - CHOICE OF PROCEDURES |
| BS EN 61672-2 : 2013 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| I.S. EN ISO 15651:2017 | NUCLEAR ENERGY - DETERMINATION OF TOTAL HYDROGEN CONTENT IN PUO[2] AND UO[2] POWDERS AND UO[2], (U,GD)O[2] AND (U,PU)O[2] SINTERED PELLETS - INERT GAS EXTRACTION AND CONDUCTIVITY DETECTION METHOD (ISO 15651:2015) |
| ISO 7500-1:2018 | Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system |
| I.S. EN 16012:2012 | THERMAL INSULATION FOR BUILDINGS - REFLECTIVE INSULATION PRODUCTS - DETERMINATION OF THE DECLARED THERMAL PERFORMANCE |
| EN 60154-4:2017 | Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides |
| I.S. EN ISO 3095:2013 | ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES (ISO 3095:2013) |
| ANSI S3.36 : 2012 | SPECIFICATION FOR A MANIKIN FOR SIMULATED IN-SITU AIRBORNE ACOUSTIC MEASUREMENTS |
| S.R. CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| I.S. EN ISO 11704:2015 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD (ISO 11704:2010) |
| I.S. EN 15841:2009 | AMBIENT AIR QUALITY - STANDARD METHOD FOR DETERMINATION OF ARSENIC, CADMIUM, LEAD AND NICKEL IN ATMOSPHERIC DEPOSITION |
| IEC 60942:2017 | Electroacoustics - Sound calibrators |
| ISO 230-1:2012 | Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions |
| ISO/TR 19319:2013 | Surface chemical analysis Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods |
| ISO 18937:2014 | Imaging materials Photographic reflection prints Methods for measuring indoor light stability |
| ISO/TS 19159-3:2018 | Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 3: SAR/InSAR |
| I.S. EN ISO 16859-3:2015 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS (ISO 16859-3:2015) |
| UNE-ISO 22514-1:2017 | Statistical methods in process management -- Capability and performance -- Part 1: General principles and concepts |
| ISO 6145-2:2014 | Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 2: Piston pumps |
| BS EN 50563 : 2011 | EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES |
| UNE-EN ISO 14253-2:2012 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011) |
| ISO 21439:2009 | Clinical dosimetry — Beta radiation sources for brachytherapy |
| I.S. EN ISO 2360:2017 | NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017) |
| ISO 20263:2017 | Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials |
| CEI EN 50379-1 : 2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| CEI EN 61672-2 : 2014 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| NF EN 62489-1 : 2010 AMD 2 2018 | ELECTROACOUSTICS - AUDIO-FREQUENCY INDUCTION LOOP SYSTEMS FOR ASSISTED HEARING - PART 1: METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE OF SYSTEM COMPONENTS |
| I.S. EN 61000-4-21:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS |
| I.S. EN 16450:2017 | AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5) |
| I.S. EN ISO 11665-5:2015 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 5: CONTINUOUS MEASUREMENT METHOD OF THE ACTIVITY CONCENTRATION (ISO 11665-5:2012) |
| ISO 17179:2016 | Stationary source emissions — Determination of the mass concentration of ammonia in flue gas — Performance characteristics of automated measuring systems |
| UNI CEI ISO/IEC 17007 : 2010 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| UNI EN ISO 14253-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| UNI EN 15841 : 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR DETERMINATION OF ARSENIC, CADMIUM, LEAD AND NICKEL IN ATMOSPHERIC DEPOSITION |
| UNI ISO 10817-1 : 2011 | ROTATING SHAFT VIBRATION MEASURING SYSTEMS - PART 1: RELATIVE AND ABSOLUTE SENSING OF RADIAL VIBRATION |
| ISO 22262-3:2016 | Air quality Bulk materials Part 3: Quantitative determination of asbestos by X-ray diffraction method |
| ISO 50015:2014 | Energy management systems — Measurement and verification of energy performance of organizations — General principles and guidance |
| I.S. EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| UNI EN ISO 12311 : 2013 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR |
| BS EN ISO 6416:2005 | Hydrometry. Measurement of discharge by the ultrasonic (acoustic) method |
| I.S. EN 61724-1:2017 | PHOTOVOLTAIC SYSTEM PERFORMANCE - PART 1: MONITORING |
| ISO 19467:2017 | Thermal performance of windows and doors — Determination of solar heat gain coefficient using solar simulator |
| CSA C813.1 : 2014 | PERFORMANCE TEST METHOD FOR UNINTERRUPTIBLE POWER SUPPLIES |
| ISO/TR 20461:2000 | Determination of uncertainty for volume measurements made using the gravimetric method |
| ISO 6145-7:2009 | Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 7: Thermal mass-flow controllers |
| BS ISO 7504:2015 | Gas analysis. Vocabulary |
| CEI EN 61788-16 : 2013 | SUPERCONDUCTIVITY - PART 16: ELECTRONIC CHARACTERISTIC MEASUREMENTS - POWER DEPENDENT SURFACE RESISTANCE OF SUPERCONDUCTORS AT MICROWAVE FREQUENCIES |
| UNE-EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| I.S. EN 62359:2011 | ULTRASONICS - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS |
| ISO 16840-6:2015 | Wheelchair seating — Part 6: Simulated use and determination of the changes in properties of seat cushions |
| IEC TS 62129-3:2014 | Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs |
| UNE-EN 50379-1:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods |
| ISO/TS 28037:2010 | Determination and use of straight-line calibration functions |
| EN ISO 20785-3:2017 | Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO 20785-3:2015) |
| UNE-EN ISO 22007-4:2017 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017) |
| ISO 15042:2017 | Multiple split-system air conditioners and air-to-air heat pumps — Testing and rating for performance |
| EN ISO 6416:2017 | Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017) |
| ISO 30011:2010 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry |
| 16/30338920 DC : 0 | BS EN 14325 - PROTECTIVE CLOTHING AGAINST CHEMICALS - TEST METHODS AND PERFORMANCE CLASSIFICATION OF CHEMICAL PROTECTIVE CLOTHING MATERIALS, SEAMS, JOINS AND ASSEMBLAGES |
| ASTM D 6061 : 2001 | Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| UNE-EN ISO 22476-7:2015 | Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test (ISO 22476-7:2012) |
| DIN EN ISO 10704:2015-11 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD (ISO 10704:2009) |
| NF EN 60904-4 : 2010 | PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION TRACEABILITY |
| UNE-EN ISO 13138:2012 | Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012) |
| ANSI/ASA S1.15 PART 2 : 2005(R2015) | MEASUREMENT MICROPHONES - PART 2: PRIMARY METHOD FOR PRESSURE CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE |
| NF EN ISO 21258 : 2010 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE (N[2]O) - REFERENCE METHOD: NON-DISPERSIVE INFRARED METHOD |
| BS EN 13032-4:2015 | Light and lighting. Measurement and presentation of photometric data of lamps and luminaires LED lamps, modules and luminaires |
| UNE-EN ISO 6145-7:2011 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009) |
| AGA XQ0901 : 0 | AGA REPORT NO. 5, NATURAL GAS ENERGY MEASUREMENT |
| ISO 11665-11:2016 | Measurement of radioactivity in the environment Air: radon-222 Part 11: Test method for soil gas with sampling at depth |
| IEC TS 62941:2016 | Terrestrial photovoltaic (PV) modules - Guideline for increased confidence in PV module design qualification and type approval |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| ISO 12828-2:2016 | Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods |
| ASTM E 2972 : 2015 | Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials |
| IEC 61786-2:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 2: Basic standard for measurements |
| UNE-EN ISO 16859-2:2016 | Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015) |
| UNE-EN 16272-6:2015 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions |
| CEI EN 50383 : 2013 | BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ) |
| OVE/ONORM EN 55016-4-2 : 2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY (CISPR 16-4-2:2011 + A1:2014) |
| UNI EN ISO 6145-5 : 2011 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 5: CAPILLARY CALIBRATION DEVICES |
| CEI EN 60318-1 : 2011 | ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 1: EAR SIMULATOR FOR THE MEASUREMENT OF SUPRA-AURAL AND CIRCUMAURAL EARPHONES |
| UNE-EN ISO 6506-2:2015 | Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
| UNI EN ISO 17450-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES |
| ISO 27894:2009 | Vacuum technology Vacuum gauges Specifications for hot cathode ionization gauges |
| DKD-R 3-1-1 : 2010 | KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - BLATT 1: GRUNDLAGEN |
| ANSI/ASA S1.4 PART 2 : 2014 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| ASTM E 2594 : 2009 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
| I.S. EN ISO 15194:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| ISO 15112:2011 | Natural gas Energy determination |
| I.S. EN ISO 16859-2:2015 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
| ASTM E 2594 : 2009 : R2014 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
| ASTM E 2371 : 2013 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
| I.S. EN 61674:2013 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMICONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING (IEC 61674:2012 (EQV)) |
| ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ASTM C 1128 : 2018 : REDLINE | Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
| ISO/TS 23165:2006 | Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty |
| ISO 4359:2013 | Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes |
| IEC 60645-1:2017 | Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry |
| ISO 11665-5:2012 | Measurement of radioactivity in the environment Air: radon-222 Part 5: Continuous measurement method of the activity concentration |
| EN 61400-11:2013 | Wind turbines - Part 11: Acoustic noise measurement techniques |
| IEC 60456:2010 | Clothes washing machines for household use - Methods for measuring the performance |
| ISO 6141:2015 | Gas analysis Contents of certificates for calibration gas mixtures |
| DIN EN ISO 14577-3:2015-11 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015) |
| DIN EN ISO 11200:2014-10 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014) |
| DIN EN ISO 11137-3:2015-08 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
| UNE-EN 15058:2017 | Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry |
| IEC 61280-1-1:2013 | Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable |
| UNE-EN 14789:2017 | Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism |
| BS EN ISO 10882-1:2011 | Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator\'s breathing zone Sampling of airborne particles |
| BS EN ISO 8253-3:2012 | Acoustics. Audiometric test methods Speech audiometry |
| BS EN 12341:2014 | Ambient air. Standard gravimetric measurement method for the determination of the PM<sub>10</sub> or PM<sub>2,5</sub> mass concentration of suspended particulate matter |
| UNE-EN ISO 11200:2014 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
| UNE-EN ISO 6974-5:2015 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014) |
| ISO 6974-1:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
| BS EN ISO 748:2007 | Hydrometry. Measurement of liquid flow in open channels using current-meters or floats |
| BS EN ISO 14577-2:2015 | Metallic materials. Instrumented indentation test for hardness and materials parameters Verification and calibration of testing machines |
| UNE-EN 14181:2015 | Stationary source emissions - Quality assurance of automated measuring systems |
| PD ISO/TS 20656-1:2017 | Plastics piping systems. General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes Buried pipes |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| BS EN 14181:2014 | Stationary source emissions. Quality assurance of automated measuring systems |
| UNE-EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| UNE-EN 61094-2:2011 | Electroacoustics - Measurement microphones -- Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique |
| DIN EN 14790:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| BS EN ISO 15011-1:2002 | Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding Determination of emission rate and sampling for analysis of particulate fume |
| UNE-EN 61094-3:2017 | Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique |
| BS EN ISO 10846-2:2008 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| UNE-EN ISO 16000-26:2014 | Indoor air - Part 26: Sampling strategy for carbon dioxide (CO2) (ISO 16000-26:2012) |
| UNE-EN ISO 6976:2017 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| ISO 11205:2003 | Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
| ISO 14720-1:2013 | Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 1: Infrared measurement methods |
| ISO/IEC 17043:2010 | Conformity assessment — General requirements for proficiency testing |
| BS EN ISO 8253-1:2010 | Acoustics. Audiometric test methods Pure-tone air and bone conduction audiometry |
| BS EN ISO 11201:2010 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 148-2:2016 | Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines |
| BS EN ISO 10846-4:2003 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Dynamic stiffness of elements other than resilient supports for translatory motion |
| CISPR 17:2011 | Methods of measurement of the suppression characteristics of passive EMC filtering devices |
| BS EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method |
| BS EN ISO 6976:2005 | Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition |
| ISO 11665-2:2012 | Measurement of radioactivity in the environment Air: radon-222 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products |
| BS EN 14791:2017 | Stationary source emissions. Determination of mass concentration of sulphur oxides. Standard reference method |
| IEC 62047-26:2016 | Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures |
| I.S. EN ISO 14577-2:2015 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 14577-2:2015) |
| I.S. EN ISO 20743:2013 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013) |
| I.S. EN ISO 11608-1:2015 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014) |
| CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| EN 12405-2:2012 | Gas meters - Conversion devices - Part 2: Energy conversion |
| EN 60645-7:2010 | Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses |
| CEN/TR 1030-2:2016 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace |
| EN 61788-16:2013 | Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies |
| DIN EN 14154-2:2011-06 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| BS 8888:2011 | Technical product documentation and specification |
| EN 61094-2:2009 | Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique |
| EN 61280-4-2:2014 | Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
| EN 62321-1:2013 | Determination of certain substances in electrotechnical products - Part 1: Introduction and overview |
| EN 61788-8:2010 | Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method |
| EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
| EN 50380:2017 | Marking and documentation requirements for Photovoltaic Modules |
| DIN EN ISO 148-2:2017-05 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 2: VERIFICATION OF TESTING MACHINES (ISO 148-2:2016) |
| CEN/TS 17021:2017 | Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques |
| EN 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| EN 61094-5:2016 | Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| DIN ISO 5129:2014-11 | Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight (ISO 5129:2001 + Amd.1:2013) |
| EN 55017:2011 | Methods of measurement of the suppression characteristics of passive EMC filtering devices |
| EN 61207-1:2010 | Expression of performance of gas analyzers - Part 1: General |
| EN 50379-1:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods |
| EN 60154-2:2016 | Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides |
| CEN ISO/TS 16491:2012 | Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests (ISO/TS 16491:2012) |
| EN 61083-2:2013 | Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents |
| EN 62585:2012 | Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter |
| EN 61788-18:2013 | Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| EN 62479:2010 | Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
| EN 12102:2013 | Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level |
| EN ISO 14253-3:2011 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
| DIN EN 14789:2017-05 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| EN 62607-3-1:2014 | Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency |
| IEC 60068-3-6:2018 RLV | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
| EN 61260-1:2014 | Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications |
| EN 61672-3:2013 | Electroacoustics - Sound level meters - Part 3: Periodic tests |
| EN ISO 13102:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012) |
| EN ISO 19901-5:2016 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2016) |
| EN 13032-4:2015 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires |
| EN 61180:2016 | High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment |
| EN 62040-5-3:2017 | Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements |
| CEN/TR 16625:2013 | Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value and declared value (MLV and MDV) - 95 % Statistic |
| DIN EN ISO 21649:2010-01 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN 62387-1:2012 | Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements |
| DIN ISO 362-1:2017-10 | MEASUREMENT OF NOISE EMITTED BY ACCELERATING ROAD VEHICLES - ENGINEERING METHOD - PART 1: M AND N CATEGORIES (ISO 362-1:2015) |
| EN 61094-8:2012/AC:2013 | Measurement microphones — Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison |
| EN 62387:2016 | Radiation protection instrumentation - Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation |
| EN 50564:2011 | Electrical and electronic household and office equipment - Measurement of low power consumption |
| DIN EN ISO 148-3:2017-04 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| EN 62129-1:2016 | Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers |
| EN 62282-3-200:2016 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| EN 61788-5:2013 | Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires |
| EN ISO 148-3:2016 | Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
| EN 12341:2014 | Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 62129-2:2011 | Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters |
| EN 60060-2:2011 | High-voltage test techniques - Part 2: Measuring systems |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 61157:2007/A1:2013 | STANDARD MEANS FOR THE REPORTING OF THE ACOUSTIC OUTPUT OF MEDICAL DIAGNOSTIC ULTRASONIC EQUIPMENT (IEC 61157:2007/A1:2013) |
| EN 60500:2017 | Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz |
| EN 62475:2010 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
| EN 14793:2017 | Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method |
| EN 62047-26:2016 | Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures |
| CEN/TR 16338:2012 | Foodstuffs - Detection of food allergens - Template for supplying information about immunological methods and molecular biological methods |
| OVE/ONORM EN 61400-11 : 2013 | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES (IEC 61400-11:2012) |
| ASME B89.3.7 : 2013 | GRANITE SURFACE PLATES |
| ASME B89.1.7 : 2009 : R2014 | PERFORMANCE STANDARD FOR STEEL MEASURING TAPES |
| MIL-PRF-55110 Revision H:2014 | Printed Wiring Board, Rigid, General Specification for |
| ASME B89.1.7 : 2009 | PERFORMANCE STANDARD FOR STEEL MEASURING TAPES |
| DEFSTAN 00-52/4(2014) : 2014 | THE GENERAL REQUIREMENTS FOR PRODUCT ACCEPTANCE AND MAINTENANCE TEST SPECIFICATIONS AND TEST SCHEDULES |
| ASME B89.1.14 : 2018 | CALIPERS |
| NF EN ISO 21649 : 2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| OVE/ONORM EN 60645-6 : 2010 | ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 6: INSTRUMENTS FOR THE MEASUREMENT OF OTOACOUSTIC EMISSIONS |
| VDI/VDE 2660 Blatt 1:2010-07 | Experimental stress analysis - Optical strain sensor based on fibre Bragg grating - Fundamentals, characteristics and sensor testing |
| I.S. EN 61000-4-3:2006 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| ONORM EN ISO 3611 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| ONORM EN ISO 11608-1 : 2015 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014) |
| API MPM CH20.3 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20: ALLOCATION MEASUREMENT - SECTION 3: MEASUREMENT OF MULTIPLE FLOW |
| BS ISO 21360-1:2012 | Vacuum technology. Standard methods for measuring vacuum-pump performance General description |
| 10/30196986 DC : 0 | BS EN ISO 16000-26 - INDOOR AIR - PART 26: MEASUREMENT STRATEGY FOR CARBON DIOXIDE (CO[2]) |
| UNE-ISO 16730-1:2017 | Fire safety engineering . Procedures and requirements for verification and validation of calculation methods . Part 1: General |
| IEC 60747-14-4:2011 | Semiconductor devices - Discrete devices - Part 14-4: Semiconductor accelerometers |
| 10/30207290 DC : 0 | BS EN 62129-2 - CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
| 10/30197204 DC : 0 | BS ISO 26101 - ACOUSTICS - TEST METHODS FOR THE QUALIFICATION OF FREE-FIELD ENVIRONMENTS |
| BS ISO 22309:2011 | Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above |
| I.S. EN 61377:2016 | RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS |
| BS EN 61966-5:2009 | Multimedia systems and equipment. Colour measurement and management Equipment using plasma display panels |
| DIN EN ISO 14720-2:2013-06 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW (ISO 14720-2:2013) |
| BS ISO 19017 : 2015 COR 2017 | GUIDANCE FOR GAMMA SPECTROMETRY MEASUREMENT OF RADIOACTIVE WASTE |
| 10/30174936 DC : 0 | BS ISO 11352 - WATER QUALITY - DETERMINATION OF MEASUREMENT UNCERTAINTY BASED ON VALIDATION DATA |
| I.S. EN 62282-3-200:2016 | FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| ASTM E 2994 : 2016 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method) |
| CEI EN 60318-4 : 2011 | ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 4: OCCLUDED-EAR SIMULATOR FOR THE MEASUREMENT OF EARPHONES COUPLED TO THE EAR BY MEANS OF EAR INSERTS |
| 14/30298593 DC : 0 | BS EN 1793-4 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION |
| 10/30201937 DC : 0 | BS ISO 13161 - WATER QUALITY - MEASUREMENT OF POLONIUM 210 CONCENTRATION ACTIVITY IN WATER BY ALPHA SPECTROMETRY |
| CSA C22.2 No. 60601.2.5:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT |
| 11/30227621 DC : DRAFT MAY 2011 | BS EN ISO 14720-1 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS |
| ISO 14701:2011 | Surface chemical analysis X-ray photoelectron spectroscopy Measurement of silicon oxide thickness |
| ISO 14385-1:2014 | Stationary source emissions — Greenhouse gases — Part 1: Calibration of automated measuring systems |
| 14/30275429 DC : 0 | BS ISO 16638-1 - RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: URANIUM |
| 11/30245877 DC : 0 | BS EN 62387 - RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR PERSONAL AND ENVIRONMENTAL MONITORING |
| BS EN 16272-6:2014 | Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions |
| BS EN ISO 14253-2:2011 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| 12/30266709 DC : 0 | BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| 12/30256719 DC : 0 | BS ISO/ASTM 51940 - GUIDE FOR DOSIMETRY FOR STERILE INSECTS RELEASE PROGRAMS |
| 13/30279964 DC : 0 | BS EN ISO 3743-2:1994/AMD 1 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
| ANSI S12.57 : 2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
| UNE-EN ISO 27971:2015 | Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015) |
| CSA Z24510 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS |
| BS EN ISO 16610-61:2015 | Geometrical product specification (GPS). Filtration Linear areal filters. Gaussian filters |
| I.S. EN ISO 10704:2015 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD (ISO 10704:2009) |
| BS ISO 26367-2:2017 | Guidelines for assessing the adverse environmental impact of fire effluents Methodology for compiling data on environmentally significant emissions from fires |
| BS ISO 10505:2009 | Photography. Root mean square granularity of photographic films. Method of measurement |
| ISO 29661:2012 | Reference radiation fields for radiation protection — Definitions and fundamental concepts |
| 13/30275718 DC : 0 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| ISO 24095:2009 | Workplace air Guidance for the measurement of respirable crystalline silica |
| DIN EN ISO 21258:2010-11 | Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N<(Index)2>O) - Reference method: Non-dispersive infrared method (ISO 21258:2010) |
| 11/30212853 DC : 0 | BS ISO 14382 - WORKPLACE ATMOSPHERES - DETERMINATION OF TOLUENE DIISOCYANATE VAPORS USING 1-(2-PYRIDYL)PIPERAZINE-COATED GLASS FIBER FILTERS AND ANALYSIS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH ULTRAVIOLET AND FLUORESCENT DETECTORS |
| UNE-EN 16272-4:2017 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field |
| 10/30214880 DC : 0 | BS ISO 18738-1 - MEASUREMENT OF LIFT RIDE QUALITY - PART 1: LIFTS (ELEVATORS) |
| BS EN 62058-21:2010 | Electricity metering equipment (a.c.). Acceptance inspection Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B) |
| ECA EURAMET CG-23 : 2018 | GUIDELINES ON THE CALIBRATION OF ANGULAR ENCODERS |
| UNE-EN ISO 11608-5:2013 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
| API MPM CH22.2 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 22 - TESTING PROTOCOL - SECTION 2 - DIFFERENTIAL PRESSURE FLOW MEASUREMENT DEVICES |
| BS EN ISO 11819-2:2017 | Acoustics. Measurement of the influence of road surfaces on traffic noise The close-proximity method |
| I.S. EN 61005:2017 | RADIATION PROTECTION INSTRUMENTATION - NEUTRON AMBIENT DOSE EQUIVALENT (RATE) METERS |
| I.S. EN 16272-6:2014 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
| BS EN ISO 13225:2012 | Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics |
| UNE-EN ISO 13385-2:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
| UNE-EN 61377:2016 | Railway applications - Rolling stock - Combined test method for traction systems |
| BS ISO 50015:2014 | Energy management systems. Measurement and verification of energy performance of organizations. General principles and guidance |
| ISO 13164-1:2013 | Water quality — Radon-222 — Part 1: General principles |
| 09/30208595 DC : 0 | BS EN 61672-3 ED.2 - ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS |
| BS EN ISO 148-1:2016 | Metallic materials. Charpy pendulum impact test Test method |
| ISO/TR 14345:2012 | Fatigue Fatigue testing of welded components Guidance |
| BS ISO/CIE 19476:2014 | Characterization of the performance of illuminance meters and luminance meters |
| BS EN ISO 16641:2016 | Measurement of radioactivity in the environment. Air. Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors |
| BS EN ISO 14720-2:2013 | Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow |
| 15/30295114 DC : 0 | BS EN ISO 25178-71 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 71: SOFTWARE MEASUREMENT STANDARDS |
| ISO 13943:2017 | Fire safety — Vocabulary |
| 10/30201740 DC : 0 | BS ISO/IEC 18046-2 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE |
| ISO 14253-2:2011 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| UNI EN 16603-10-09 : 2014 | SPACE ENGINEERING - REFERENCE COORDINATE SYSTEM |
| DD ISO/TS 7849-1:2009 | Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement Survey method using a fixed radiation factor |
| 11/30252162 DC : 0 | BS EN 62209-1 - HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 1: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR)FOR DEVICES USED NEXT TO THE EAR (FREQUENCY RANGE OF 300 MHZ TO 6 GHZ) |
| 15/30332687 DC : 0 | BS EN 60794-1-2 - OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - CROSS REFERENCE TABLE FOR OPTICAL CABLE TEST PROCEDURES |
| BS ISO 15651 : 2015 | NUCLEAR ENERGY - DETERMINATION OF TOTAL HYDROGEN CONTENT IN PUO[2] AND UO[2] POWDERS AND UO[2], (U,GD)O[2] AND (U,PU)O[2] SINTERED PELLETS - INERT GAS EXTRACTION AND CONDUCTIVITY DETECTION METHOD |
| BS ISO 10302-2:2011 | Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Structure-borne vibration measurements |
| 10/30213857 DC : 0 | BS ISO 8253-3 - ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY |
| 16/30339586 DC : 0 | BS EN 60068-3-6 - ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
| 14/30303365 DC : 0 | BS ISO/ASTM 51649 - PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 300 KEV AND 25 MEV |
| 12/30258949 DC : 0 | BS ISO 16610-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS |
| EN 62271-100 : 2009 AMD 2/COR 18 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2008/A2:2017/COR1:2018) |
| 15/30295576 DC : 0 | BS ISO 16331-1 - OPTICS AND OPTICAL INSTRUMENTS - LABORATORY PROCEDURES FOR TESTING SURVEYING AND CONSTRUCTION INSTRUMENTS - PART 1: PERFORMANCE OF HANDHELD LASER DISTANCE METERS |
| PD ISO/TR 13014:2012 | Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| 16/30311281 DC : 0 | BS EN ISO 19918 - PROTECTIVE CLOTHING - PROTECTION AGAINST CHEMICALS - MEASUREMENT OF CUMULATIVE PERMEATION OF CHEMICALS WITH LOW VAPOUR PRESSURE THROUGH MATERIALS |
| 16/30319087 DC : 0 | BS ISO 9123 - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS - STAGE-FALL-DISCHARGE RELATIONSHIPS |
| I.S. EN ISO 16610-30:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 30: ROBUST PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-30:2015) |
| BS ISO 13164-2:2013 | Water quality. Radon-222 Test method using gamma-ray spectrometry |
| BS EN ISO 16638-1:2017 | Radiological protection. Monitoring and internal dosimetry for specific materials Inhalation of uranium compounds |
| 17/30356677 DC : 0 | BS ISO/ASTM 51538 - PRACTICE FOR USE OF THE ETHANOL-CHLOROBENZENE DOSIMETRY SYSTEM |
| EI HM 56 : 2010 | CONTINUOUS ON-LINE MEASUREMENT OF WATER CONTENT IN PETROLEUM (CRUDE OIL AND CONDENSATE) |
| 12/30250625 DC : 0 | BS EN 16272-6 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
| DIN EN ISO 11608-5:2013-01 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
| DIN EN 16012:2015-05 | Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance (includes Amendment A1:2015) |
| I.S. EN 16523-1:2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| 15/30293847 DC : 0 | BS EN ISO 6416 - HYDROMETRY - MEASUREMENT OF DISCHARGE BY THE ULTRASONIC TRANSIT TIME (TIME OF FLIGHT) METHOD |
| NF EN ISO 8015 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| 14/30280137 DC : 0 | BS EN 62282-3-200 ED 2.0 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| BS EN ISO 22476-7:2012 | Geotechnical investigation and testing. Field testing Borehole jack test |
| 16/30344112 DC : 0 | BS ISO/ASTM 51939 - PRACTICE FOR BLOOD IRRADIATION DOSIMETRY |
| PD IEC/PAS 63083:2017 | Specific absorption rate (SAR) measurement procedure for long term evolution (LTE) devices |
| CEI EN 60731 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY |
| 13/30277457 DC : 0 | BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| PD IEC/TS 62600-100:2012 | Marine energy. Wave, tidal and other water current converters Electricity producing wave energy converters. Power performance assessment |
| 12/30237514 DC : 0 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| BS ISO 11665-6 : 2012 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 6: SPOT MEASUREMENT METHOD OF THE ACTIVITY CONCENTRATION |
| BS ISO 17179:2016 | Stationary source emissions. Determination of the mass concentration of ammonia in flue gas. Performance characteristics of automated measuring systems |
| PREN 14791 : DRAFT 2014 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
| DIN EN ISO 11201:2010-10 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| ISO 16063-45:2017 | Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil |
| BS ISO 26303:2012 | Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools |
| PD IEC/TS 62282-7-1:2017 | Fuel cell technologies Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC) |
| BS ISO 13166:2014 | Water quality. Uranium isotopes. Test method using alpha-spectrometry |
| BS ISO 14382:2012 | Workplace atmospheres. Determination of toluene diisocyanate vapours using 1-(2-pyridyl) piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors |
| DIN EN ISO 8015:2011-09 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| BS EN 60645-6:2010 | Electroacoustics. Audiometric equipment Instruments for the measurement of otoacoustic emissions |
| 13/30287223 DC : 0 | BS ISO 19289 - METEOROLOGY - SITING CLASSIFICATIONS FOR SURFACE OBSERVING STATIONS ON LAND |
| PD ISO/TS 17822-1:2014 | <i>In</i> <i>vitro</i> diagnostic test systems. Qualitative nucleic acid-based <i>in</i> <i>vitro</i> examination procedures for detection and identification of microbial pathogens General requirements, terms and definitions |
| BS EN 62321-8:2017 | Determination of certain substances in electrotechnical products Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) |
| BS EN 16242:2012 | Conservation of cultural heritage. Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
| 11/30207395 DC : 0 | BS ISO 13199 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOC) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED METHOD EQUIPPED WITH CATALYTIC CONVERTER |
| BS ISO 20785-1 : 2012 | DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 1: CONCEPTUAL BASIS FOR MEASUREMENTS |
| BS EN ISO 22007-4:2017 | Plastics. Determination of thermal conductivity and thermal diffusivity Laser flash method |
| PD CEN ISO/TS 15530-1:2013 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics |
| BS ISO 9296:2017 | Acoustics. Declared noise emission values of information technology and telecommunications equipment |
| ISO 10840:2008 | Plastics — Guidance for the use of standard fire tests |
| 12/30259914 DC : 0 | BS EN ISO 8311 - REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - CALIBRATION OF MEMBRANE TANKS AND INDEPENDENT PRISMATIC TANKS IN SHIPS - MANUAL AND INTERNAL ELECTRO-OPTIC DISTANCE-RANGING METHODS |
| 11/30148668 DC : 0 | IEC 61400-12-2 - WIND TURBINES - PART 12-2: POWER PERFORMANCE OF ELECTRICITY PRODUCING WIND TURBINES BASED ON NACELLE ANEMOMETRY |
| ISO 7503-1:2016 | Measurement of radioactivity Measurement and evaluation of surface contamination Part 1: General principles |
| BS EN ISO 17450-2:2012 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities |
| 16/30334592 DC : 0 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| I.S. EN 1793-5:2016 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS |
| 14/30297921 DC : 0 | BS EN 62040-5-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS FOR D.C. UPS |
| 11/30253839 DC : 0 | BS EN 60118-0 ED.3 - ELECTROACOUSTICS- HEARING AIDS - PART 0: MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF HEARING AIDS (AMALGAMATED REVISION OF IEC 60118-0, IEC 60118-1, IEC 60118-2, IEC 60118-6) |
| BS EN 62040-5-3:2017 | Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements |
| 16/30301971 DC : 0 | BS ISO 1438 - HYDROMETRY - OPEN CHANNEL FLOW MEASUREMENT USING THIN-PLATE WEIRS |
| 13/30286383 DC : 0 | BS ISO 18589-3 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 3: MEASUREMENT OF GAMMA-EMITTING RADIONUCLIDES |
| 17/30328201 DC : 0 | BS ISO 13169 - WATER QUALITY - URANIUM - TEST METHOD USING ALPHA LIQUID SCINTILLATION COUNTING |
| BS EN 62129-1:2016 | Calibration of wavelength/optical frequency measurement instruments Optical spectrum analyzers |
| BS EN 61207-1:2010 | Expression of performance of gas analyzers General |
| BS EN 60904-4:2009 | Photovoltaic devices Reference solar devices. Procedures for establishing calibration traceability |
| 14/30313972 DC : 0 | BS EN 60645-1 ED.4.0 - ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AND SPEECH AUDIOMETRY |
| API TR 2571 : 2011 | FUEL GAS MEASUREMENT |
| DIN EN 15267-4:2015-08 (Draft) | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES |
| ISO 20391-1:2018 | Biotechnology — Cell counting — Part 1: General guidance on cell counting methods |
| 14/30270415 DC : 0 | BS ISO 362-3 - EASUREMENT OF NOISE EMITTED BY ACCELERATING ROAD VEHICLES - ENGINEERING METHOD - PART 3: INDOOR TESTING M AND N CATEGORIES |
| BS ISO 15767:2009 | Workplace atmospheres. Controlling and characterizing uncertainty in weighing collected aerosols |
| 10/30203803 DC : 0 | BS ISO 6974-2 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
| I.S. EN ISO 13943:2017 | FIRE SAFETY - VOCABULARY (ISO 13943:2017) |
| I.S. EN ISO 16610-1:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
| PD CEN/TS 17021:2017 | Stationary source emissions. Determination of the mass concentration of sulphur dioxide by instrumental techniques |
| DIN ISO 3567:2015-05 | VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE (ISO 3567:2011) |
| 16/30346580 DC : 0 | BS EN 13771-2 - COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| 16/30321526 DC : 0 | BS ISO 19935-1 - PLASTICS - TEMPERATURE MODULATED DSC - PART 1: GENERAL PRINCIPLES |
| I.S. EN ISO 13102:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012) |
| BS EN ISO 15193:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures |
| BS EN ISO 16859-2:2015 | Metallic materials. Leeb hardness test Verification and calibration of the testing devices |
| BS EN 61280-1-1:2013 | Fibre optic communication subsystem basic test procedures Test procedures for general communication subsystems. Transmitter output optical power measurement for single-mode optical fibre cable |
| 18/30368966 DC : 0 | BS ISO 14701 - SURFACE CHEMICAL ANALYSIS - X-RAY PHOTOELECTRON SPECTROSCOPY - MEASUREMENT OF SILICON OXIDE THICKNESS |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| S.R. CEN/TS 16272-5:2014 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS |
| BS ISO 22514-7:2012 | Statistical methods in process management. Capability and performance Capability of measurement processes |
| CEI EN 61788-12 : 2014 | SUPERCONDUCTIVITY - PART 12: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO NON-COPPER VOLUME RATIO OF NB[3]SN COMPOSITE SUPERCONDUCTING WIRES |
| 15/30315820 DC : DRAFT JAN 2015 | BS EN ISO 1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STANDARD REFERENCE TEMPERATURE FOR THE SPECIFICATION OF GEOMETRICAL AND DIMENSIONAL PROPERTIES |
| 17/30357741 DC : 0 | BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| 12/30263752 DC : 0 | BS ISO 12154 - DETERMINATION OF DENSITY BY VOLUMETRIC DISPLACEMENT - SKELETON DENSITY BY GAS PYCNOMETRY |
| DIN EN ISO 25378:2011-12 | Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) |
| BS ISO 5-2:2009 | Photography and graphic technology. Density measurements Geometric conditions for transmittance density |
| BS ISO 14385-2:2014 | Stationary source emissions. Greenhouse gases Ongoing quality control of automated measuring systems |
| BS ISO 19361:2017 | Measurement of radioactivity. Determination of beta emitters activities. Test method using liquid scintillation counting |
| DIN ISO 16000-3:2013-01 | Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method (ISO 16000-3:2011) |
| BS ISO 27893:2011 | Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge |
| IEC 61757:2018 | Fibre optic sensors - Generic specification |
| 16/30275393 DC : 0 | BS ISO 532-2 - ACOUSTICS - METHODS FOR CALCULATING LOUDNESS - PART 2: MOORE-GLASBERG METHOD |
| BS ISO 10840:2008 | Plastics. Guidance for the use of standard fire tests |
| 14/30289271 DC : 0 | BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| DIN EN ISO 12999-1:2014-09 | Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
| 12/30242633 DC : 0 | BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF STATISTICAL TOLERANCE INTERVALS |
| BS ISO 2425:2010 | Hydrometry. Measurement of liquid flow in open channels under tidal conditions |
| BS ISO 16966:2013 | Nuclear energy. Nuclear fuel technology. Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors |
| UNE-EN ISO 148-1:2017 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| 12/30244420 DC | BS ISO 13304. Radiological protection. Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation |
| BS EN 60794-1-20:2014 | Optical fibre cables Generic specification. Basic optical cable test procedures. General and definitions |
| DIN EN 15841:2010-04 | Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition |
| BS ISO/IEC 18047-6:2017 | Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications at 860 MHz to 960 MHz |
| 08/30177580 DC : DRAFT FEB 2008 | BS EN 61260-1 - ELECTRO ACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS |
| BS EN ISO 11665-5:2015 | Measurement of radioactivity in the environment. Air:radon-222 Continuous measurement method of the activity concentration |
| 14/30283703 DC : 0 | BS ISO 8769 - REFERENCE SOURCES - CALIBRATION OF SURFACE CONTAMINATION MONITORS - ALPHA-, BETA- AND PHOTON EMITTERS |
| IES LM 59 : 2000 | ELECTRICAL AND PHOTOMETRIC MEASUREMENT OF LOW PRESSURE SODIUM LAMPS |
| 15/30289813 DC : 0 | BS EN ISO 4545-1 - METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 1: TEST METHOD |
| BS EN 15852:2010 | Ambient air quality. Standard method for the determination of total gaseous mercury |
| UNE-EN 50563:2012 | External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes |
| BS ISO 13253:2017 | Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance |
| BS ISO 12799:2015 | Nuclear energy. Determination of nitrogen content in UO<sub>2</sub>, (U,Gd)O<sub>2</sub> and (U,Pu)O<sub>2</sub> sintered pellets. Inert gas extraction and conductivity detection method |
| BS ISO 9123:2017 | Hydrometry. Stage-fall-discharge relationships |
| UNE-EN ISO 22476-5:2014 | Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012) |
| 14/30250844 DC : 0 | BS EN ISO 6142-1 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES |
| BS EN 61745:2017 | End-face image analysis procedure for the calibration of optical fibre geometry test sets Part 1: Introduction and roadmap for standardization |
| BS EN 15991:2015 | Testing of ceramic and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV) |
| PD IEC/TS 62282-7-2:2014 | Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC) |
| 17/30302594 DC : 0 | BS ISO 4869-6 - ACOUSTICS - HEARING PROTECTORS - PART 6: DETERMINATION OF SOUND ATTENUATION OF ACTIVE NOISE REDUCTION EARMUFFS |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| 14/30303599 DC : 0 | BS EN ISO 19694-3 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 3: CEMENT INDUSTRY |
| 15/30297373 DC : 0 | BS EN ISO 4869-1 - ACOUSTICS - HEARING PROTECTORS - PART 1: SUBJECTIVE METHOD FOR THE ASUREMENT OF SOUND ATTENUATION |
| BS ISO 13472-2:2010 | Acoustics. Measurement of sound absorption properties of road surfaces in situ Spot method for reflective surfaces |
| 13/30294667 DC : 0 | BS EN 61260-3 ED.1.0 - ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 3: PERIODIC TESTS |
| BS EN ISO 25140:2010 | Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID) |
| BS ISO 23788:2012 | Metallic materials. Verification of the alignment of fatigue testing machines |
| NF ISO 10704 : 2010 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD |
| 14/30295940 DC : 0 | BS ISO/IEC 18046-4 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 4: TEST METHODS FOR PERFORMANCE OF RFID GATES IN LIBRARIES |
| NF EN ISO 9612 : 2009 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| BS EN 61788-17:2013 | Superconductivity Electronic characteristic measurements. Local critical current density and its distribution in large-area superconducting films |
| BS ISO 24173:2009 | Microbeam analysis. Guidelines for orientation measurement using electron backscatter diffraction |
| BS ISO 16063-17:2016 | Methods for the calibration of vibration and shock transducers Primary calibration by centrifuge |
| ISO/TS 15530-4:2008 | Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation |
| DIN EN ISO 6142-1:2015-12 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 6142-1:2015) |
| BS ISO 14934-2:2013 | Fire tests. Calibration and use of heat flux meters Primary calibration methods |
| EN 61724-1:2017 | Photovoltaic system performance - Part 1: Monitoring |
| 11/30240648 DC : 0 | BS EN 60794-1-20 - OPTICAL FIBRE CABLES - PART 1-20: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL AND DEFINITIONS |
| DIN EN 14793:2017-05 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| ISO 5129:2001 | Acoustics — Measurement of sound pressure levels in the interior of aircraft during flight |
| BS ISO/IEC 18046-4:2015 | Information technology. Radio frequency identification device performance test methods Test methods for performance of RFID gates in libraries |
| BS ISO 22007-6 : 2014 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE |
| 16/30334494 DC : 0 | BS EN ISO 12354-1 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS |
| NF EN 50383 : 2010 | BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ) |
| 10/30203578 DC : 0 | BS EN 61577-3 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 3: SPECIFIC REQUIREMENTS ON RADON DECAY PRODUCT MEASURING INSTRUMENTS |
| BS ISO 16592:2012 | Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method |
| BS ISO 5151:2017 | Non-ducted air conditioners and heat pumps. Testing and rating for performance |
| 12/30231423 DC : 0 | BS ISO 13163-1 - WATER QUALITY - LEAD 210 - PART 1: LIQUID SCINTILLATION COUNTING METHOD |
| BS EN 61000-4-6:2014 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields |
| PD CEN/TR 16469:2013 | Hydrometry. Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements |
| BS ISO 24095:2009 | Workplace air. Guidance for the measurement of respirable crystalline silica |
| PD CEN/TS 16272-7:2015 | Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Extrinsic characteristics. In situ values of insertion loss |
| 14/30230935 DC : 0 | BS EN ISO 4126-11 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 11: PERFORMANCE TESTING |
| BS EN 16450:2017 | Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) |
| BS PD IEC TS 60076-19 : 2013 | POWER TRANSFORMERS - PART 19: RULES FOR THE DETERMINATION OF UNCERTAINTIES IN THE MEASUREMENT OF THE LOSSES ON POWER TRANSFORMERS AND REACTORS |
| BS ISO 29473:2010 | Fire tests. Uncertainty of measurements in fire tests |
| BS ISO/IEC 10373-6 : 2011 | IDENTIFICATION CARDS - TEST METHODS - PART 6: PROXIMITY CARDS |
| OIML D 8 : 2004 | MEASUREMENT STANDARDS. CHOICE, RECOGNITION, USE, CONSERVATION AND DOCUMENTATION |
| API TR 2572 : 2013 | CARBON CONTENT, SAMPLING, AND CALCULATION |
| BS ISO 15112 : 2011 | NATURAL GAS - ENERGY DETERMINATION |
| PD ISO/TR 12748:2015 | Natural Gas. Wet gas flow measurement in natural gas operations |
| BS EN ISO 11771:2010 | Air quality. Determination of time-averaged mass emissions and emission factors. General approach |
| 10/30212265 DC : 0 | BS ISO 14701 - SURFACE CHEMICAL ANALYSIS - X-RAY PHOTOELECTRON SPECTROSCOPY - MEASUREMENT OF SILICON OXIDE THICKNESS |
| BS EN 61157 : 2007 | STANDARD MEANS FOR THE REPORTING OF THE ACOUSTIC OUTPUT OF MEDICAL DIAGNOSTIC ULTRASONIC EQUIPMENT |
| BS ISO 16063-43:2015 | Methods for the calibration of vibration and shock transducers Calibration of accelerometers by model-based parameter identification |
| CSA ISO/IEC TR 18047-4 : 2005 : R2015 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 4: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 2,45 GHZ |
| BS EN 61377:1997 | Electric traction. Rolling stock. Combined testing of inverter-fed alternating current motors and their control |
| 11/30235530 DC : 0 | BS ISO D 51276 - PRACTICE FOR USE OF A POLYMETHYLMETHACRYLATE DOSIMETRY SYSTEM |
| 16/30337505 DC : 0 | BS EN 60154-4 - FLANGES FOR WAVEGUIDES - PART 4: RELEVANT SPECIFICATIONS FOR FLANGES FOR CIRCULAR WAVEGUIDES |
| 18/30334086 DC : DRAFT APR 2018 | BS EN ISO 20896 - DENTISTRY - DIGITAL IMPRESSION DEVICES - METHODS FOR ASSESSING ACCURACY |
| BS ISO 362-1:2015 | Measurement of noise emitted by accelerating road vehicles. Engineering method M and N categories |
| BS EN 16909:2017 | Ambient air. Measurement of elemental carbon (EC) and organic carbon (OC) collected on filters |
| I.S. EN ISO 20486:2018 | NON-DESTRUCTIVE TESTING - LEAK TESTING - CALIBRATION OF REFERENCE LEAKS FOR GASES (ISO 20486:2017) |
| 16/30344343 DC : 0 | BS ISO/ASTM 51205 - PRACTICE FOR USE OF A CERIC-CEROUS SULFATE DOSIMETRY SYSTEM |
| S.R. CEN/TS 16645:2014 | AMBIENT AIR - METHOD FOR THE MEASUREMENT OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, DIBENZ[A,H]ANTHRACENE, INDENO[1,2,3-CD]PYRENE AND BENZO[GHI]PERYLENE |
| 17/30349154 DC : 0 | BS ISO 20146 - VACUUM TECHNOLOGY - VACUUM GAUGES - SPECIFICATIONS, CALIBRATION AND MEASUREMENT UNCERTAINTIES FOR CAPACITANCE DIAPHRAGM GAUGE |
| I.S. EN 16272-4:2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD |
| CAN/CSA-ISO/IEC 18046-1:13 (R2017) | Information technology - Radio frequency identification device performance test methods - Part 1: Test methods for system performance (Adopted ISO/IEC 18046-1:2011, first edition, 2011-10-15) |
| BS ISO 16700:2004 | Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification |
| PD ISO/TS 19159-2:2016 | Geographic information. Calibration and validation of remote sensing imagery sensors and data Lidar |
| BS EN 61215-1:2016 | Terrestrial photovoltaic (PV) modules. Design qualification and type approval Test requirements |
| ANSI S12.53/1 : 2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
| NF ISO 11929 : 2010 | DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE CONFIDENCE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION |
| 17/30359986 DC : 0 | BS EN ISO 7779 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| 17/30341085 DC : 0 | BS EN ISO 13385-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: DESIGN AND METROLOGICAL CHARACTERISTICS OF CALLIPERS |
| CSA ISO/IEC 18046-2 : 2013(R2017) | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE |
| CEI EN 60469 : 2014 | TRANSITIONS, PULSES AND RELATED WAVE FORMS - TERMS, DEFINITIONS AND ALGORITHMS |
| PD ISO/TR 18105:2014 | Soil quality. Detection of water soluble chromium(VI) using a ready-to-use test-kit method |
| AHRI 1261 (SI) : 2017 | PERFORMANCE RATING OF PORTABLE FLUE GAS COMBUSTION ANALYZERS |
| PD IEC/TS 62462:2017 | Ultrasonics. Output test. Guidance for the maintenance of ultrasound physiotherapy systems |
| I.S. EN 62271-100:2009 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS |
| S.R. CEN/TR 16625:2013 | FLEXIBLE SHEETS FOR WATERPROOFING - STATISTICAL DEFINITION OF MANUFACTURER'S LIMITING VALUE AND DECLARED VALUE (MLV AND MDV) - 95% STATISTIC |
| CEI EN 61526 : 2013 | RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS |
| PREN 14790 : DRAFT 2014 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| CSA C61400-11 : 2007 | WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| BS IEC 61577-3 : 2011 | RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 3: SPECIFIC REQUIREMENTS FOR RADON DECAY PRODUCT MEASURING INSTRUMENTS |
| S.R. CEN/TR 16469:2013 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
| CEI EN 61757-1 : 2013 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION |
| I.S. EN ISO 20785-3:2017 | DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 3: MEASUREMENTS AT AVIATION ALTITUDES (ISO 20785-3:2015) |
| ISO 7504:2015 | Gas analysis Vocabulary |
| AAMI TIR 29:2012(R2017) | GUIDE FOR PROCESS CHARACTERIZATION AND CONTROL IN RADIATION STERILIZATION OF MEDICAL DEVICES |
| IEC TR 61282-11:2012 | Fibre optic communication system design guides - Part 11: Multimode launch conditions |
| BS EN ISO 9698:2015 | Water quality. Determination of tritium activity concentration. Liquid scintillation counting method |
| CEI EN 62129-2 : 2012 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
| DIN EN ISO 15112:2014-09 | Natural gas - Energy determination (ISO 15112: 2011) |
| IEC 62577:2009 | Evaluation of human exposure to electromagnetic fields from a stand-alone broadcast transmitter (30 MHz - 40 GHz) |
| AAMI TIR 29:2012 | GUIDE FOR PROCESS CHARACTERIZATION AND CONTROL IN RADIATION STERILIZATION OF MEDICAL DEVICES |
| IEC TS 62556:2014 | Ultrasonics - Field characterization - Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems |
| CEI EN 55017 : 2012 | METHODS OF MEASUREMENT OF THE SUPPRESSION CHARACTERISTICS OF PASSIVE EMC FILTERING DEVICES |
| DIN EN ISO 16664:2016-07 (Draft) | GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017) |
| EN ISO 10703:2015 | Water quality - Determination of the activity concentration of radionuclides - Method by high resolution gamma-ray spectrometry (ISO 10703:2007) |
| CSA ISO/IEC 10373-7 : 2009 : R2014 | IDENTIFICATION CARDS - TEST METHODS - PART 7: VICINITY CARDS |
| I.S. EN ISO 12311:2013 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15) |
| IEC TS 62600-201:2015 | Marine energy - Wave, tidal and other water current converters - Part 201: Tidal energy resource assessment and characterization |
| ISO 362-1:2015 | Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories |
| CSA C22.2 No. 60601.2.5 : 2011 : R2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT |
| CEI EN 61786-1 : 2014 | MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS |
| IEC 62479:2010 | Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
| ISO 13253:2017 | Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance |
| UNI EN ISO 15112 : 2014 | NATURAL GAS - ENERGY DETERMINATION |
| I.S. EN ISO 204:2009 | METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
| IEC TS 62600-100:2012 | Marine energy - Wave, tidal and other water current converters - Part 100: Electricity producing wave energy converters - Power performance assessment |
| CISPR TR 16-4-5:2006+AMD1:2014 CSV | Specification for radio disturbance and immunity measuring apparatusand methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods |
| ISO 532-2:2017 | Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method |
| UNE-EN 15841:2010 | Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition |
| I.S. EN ISO 11665-3:2015 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 3: SPOT MEASUREMENT METHOD OF THE POTENTIAL ALPHA ENERGY CONCENTRATION OF ITS SHORT-LIVED DECAY PRODUCTS (ISO 11665-3:2012) |
| ISO/TS 11665-13:2017 | Measurement of radioactivity in the environment — Air: radon 222 — Part 13: Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration test method |
| UNE 199072-2:2017 | Road traffic management equipment. Air monitoring stations on roads. Part 2: Application protocol |
| BS ISO 14701:2011 | Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness |
| UNE-EN 60645-7:2010 | Electroacoustics - Audiometric equipment -- Part 7: Instruments for the measurement of auditory brainstem responses |
| BS EN ISO 13943:2017 | Fire safety. Vocabulary |
| I.S. EN 62129-2:2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
| BS EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method |
| I.S. EN 62129-1:2016 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 1: OPTICAL SPECTRUM ANALYZERS |
| ISO/TR 14294:2011 | Workplace atmospheres Measurement of dermal exposure Principles and methods |
| CSA Z24511 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES |
| ISO 12106:2017 | Metallic materials — Fatigue testing — Axial-strain-controlled method |
| UNE-EN ISO 13199:2013 | Stationary source emissions - Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes - Non-dispersive infrared analyser equipped with catalytic converter (ISO 13199:2012) |
| UNE-EN ISO 25140:2011 | Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010) |
| I.S. EN ISO 389-9:2009 | ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 9: PREFERRED TEST CONDITIONS FOR THE DETERMINATION OF REFERENCE HEARING THRESHOLD LEVELS |
| I.S. EN IEC 60942:2018 | ELECTROACOUSTICS - SOUND CALIBRATORS |
| I.S. EN 12102:2013 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
| ISO/TS 17822-1:2014 | In vitro diagnostic test systems Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens Part 1: General requirements, terms and definitions |
| I.S. EN 62127-1:2007 | ULTRASONICS - HYDROPHONES - PART 1: MEASUREMENT AND CHARACTERIZATION OF MEDICAL ULTRASONIC FIELDS UP TO 40 MHZ (IEC 62127-1:2007 (EQV)) |
| BIS IS 14976 : 2012 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
| I.S. EN 62585:2012 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012 (EQV)) |
| BS EN 62209-2:2010 | Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices. Human models, instrumentation, and procedures Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
| ISO 16000-3:2011 | Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method |
| I.S. EN ISO 22007-4:2017 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017) |
| BS EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| UNE-EN 15267-4:2018 | Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| I.S. EN 62040-5-3:2017 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS |
| I.S. EN 60645-6:2010 | ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 6: INSTRUMENTS FOR THE MEASUREMENT OF OTOACOUSTIC EMISSIONS |
| ANSI/ASA S12.54/ISO 3744 : 2011(R2016) | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| I.S. EN ISO 22476-5:2012 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 5: FLEXIBLE DILATOMETER TEST (ISO 22476-5:2012) |
| I.S. EN 19694-3:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 3: CEMENT INDUSTRY |
| EN ISO 13160:2015 | Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012) |
| I.S. EN 62321-1:2013 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW (IEC 62321-1:2013 (EQV)) |
| I.S. EN ISO 25378:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS |
| I.S. EN ISO 14064-1:2012 | GREENHOUSE GASES - PART 1: SPECIFICATION WITH GUIDANCE AT THE ORGANIZATION LEVEL FOR QUANTIFICATION AND REPORTING OF GREENHOUSE GAS EMISSIONS AND REMOVALS (ISO 14064-1:2006) |
| NF EN ISO 3611 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. EN 1793-4:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION |
| I.S. EN ISO 11665-1:2015 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 1: ORIGINS OF RADON AND ITS SHORT-LIVED DECAY PRODUCTS AND ASSOCIATED MEASUREMENT METHODS (ISO 11665-1:2012) |
| I.S. EN ISO 13385-1:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. EN ISO 22007-3:2012 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD (ISO 22007-3:2008) |
| I.S. EN 1793-6:2012 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
| I.S. EN ISO 16638-1:2017 | RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS (ISO 16638-1:2015) |
| ISO 20456:2017 | Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids |
| BS ISO 20906 : 2009 | ACOUSTICS - UNATTENDED MONITORING OF AIRCRAFT SOUND IN THE VICINITY OF AIRPORTS |
| UNE-EN 55016-4-2:2012 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
| BS EN 1793-2:2012 | Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions |
| I.S. EN ISO 13473-5:2009 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
| ISO 3743-2:2018 | Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms |
| API MPMS CHAPTER 20.3 : 2013(R2018) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20: ALLOCATION MEASUREMENT - SECTION 3: MEASUREMENT OF MULTIPLE FLOW |
| ASTM D 6552 : 2006 : R2016 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| ISO 11929:2010 | Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation Fundamentals and application |
| I.S. EN 15980:2011 | AIR QUALITY - DETERMINATION OF THE DEPOSITION OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, BENZO[A]PYRENE, DIBENZ[A,H]ANTHRACENE AND INDENO[1,2,3-CD]PYRENE |
| ISO 13472-2:2010 | Acoustics Measurement of sound absorption properties of road surfaces in situ Part 2: Spot method for reflective surfaces |
| ISO 7503-3:2016 | Measurement of radioactivity Measurement and evaluation of surface contamination Part 3: Apparatus calibration |
| ISO/IEC 17007:2009 | Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment |
| ECA 10-14 : 2011 | GUIDELINES ON THE CALIBRATION OF STATIC TORQUE MEASURING DEVICES |
| EN ISO 9697:2017 | Water quality - Gross beta activity in non-saline water - Test method using thick source (ISO 9697:2015) |
| ISO 12183:2016 | Nuclear fuel technology — Controlled-potential coulometric assay of plutonium |
| EN IEC 60068-3-6:2018/AC:2018-05 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
| ISO 16063-21:2003 | Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer |
| UNI EN ISO 6145-7 : 2011 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 7: THERMAL MASS-FLOW CONTROLLERS |
| CEI EN 61788-17 : 2013 | SUPERCONDUCTIVITY - PART 17: ELECTRONIC CHARACTERISTIC MEASUREMENTS - LOCAL CRITICAL CURRENT DENSITY AND ITS DISTRIBUTION IN LARGE-AREA SUPERCONDUCTING FILMS |
| I.S. EN ISO 11554:2017 | OPTICS AND PHOTONICS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS (ISO 11554:2017) |
| S.R. CEN/TR 16988:2016 | ESTIMATION OF UNCERTAINTY IN THE SINGLE BURNING ITEM TEST |
| ISO 12963:2017 | Gas analysis — Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration |
| EN ISO 7500-1:2018 | Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018) |
| ISO 19703:2010 | Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires |
| ISO 6416:2017 | Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method |
| PREN ISO 15189 : DRAFT 2011 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| ISO 13164-4:2015 | Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting |
| PREN 15058 : DRAFT 2014 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
| I.S. EN ISO 11665-6:2015 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 6: SPOT MEASUREMENT METHOD OF THE ACTIVITY CONCENTRATION (ISO 11665-6:2012) |
| UNI EN ISO 25378 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS |
| ISO/TS 27893:2009 | Vacuum technology Vacuum gauges Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge |
| UNI EN ISO 14720-2 : 2013 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW |
| ISO 13304-1:2013 | Radiological protection Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 1: General principles |
| CSA ISO/IEC 10373-6 : 2018 | IDENTIFICATION CARDS - TEST METHODS - PART 6: PROXIMITY CARDS |
| I.S. EN ISO 6145-5:2010 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 5: CAPILLARY CALIBRATION DEVICES |
| ANSI S12.64-1 : 2009 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF UNDERWATER SOUND FROM SHIPS - PART 1: GENERAL REQUIREMENTS |
| ISO/ASTM 51261:2013 | Practice for calibration of routine dosimetry systems for radiation processing |
| BS EN ISO 19017:2017 | Guidance for gamma spectrometry measurement of radioactive waste |
| I.S. EN 61746-1:2011 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES |
| I.S. EN 60794-1-20:2014 | OPTICAL FIBRE CABLES - PART 1-20: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL AND DEFINITIONS |
| ONORM EN ISO 17201-3 : 2010 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 3: GUIDELINES FOR SOUND PROPAGATION CALCULATIONS |
| DIN EN ISO 9698:2015-12 | Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010) |
| I.S. EN 60154-2:2016 | FLANGES FOR WAVEGUIDES - PART 2: RELEVANT SPECIFICATIONS FOR FLANGES FOR ORDINARY RECTANGULAR WAVEGUIDES |
| I.S. EN 55017:2011 | METHODS OF MEASUREMENT OF THE SUPPRESSION CHARACTERISTICS OF PASSIVE EMC FILTERING DEVICES (CISPR 17:2011 (EQV)) |
| BIS IS 16179-1 : 2014 | STATISTICAL METHODS - GUIDELINES FOR THE EVALUATION OF CONFORMITY WITH SPECIFIED REQUIREMENTS - PART 1: GENERAL PRINCIPLES |
| IEC 62522:2014 | Calibration of tuneable laser sources |
| EN 16523-2:2015 | Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact |
| I.S. EN 61215-1:2016 | TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 1: TEST REQUIREMENTS |
| UNE-EN ISO 20785-3:2018 | Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO 20785-3:2015) |
| BS EN 60318-1:2009 | Electroacoustics. Simulators of human head and ear Ear simulator for the measurement of supra-aural and circumaural earphones |
| CEI EN 61724-1 : 1ED 2017 | PHOTOVOLTAIC SYSTEM PERFORMANCE - PART 1: MONITORING |
| IEC 61745:2017 | End-face image analysis procedure for the calibration of optical fibre geometry test sets |
| AHRI 1260 (I-P) : 2017 | PERFORMANCE RATING OF PORTABLE FLUE GAS COMBUSTION ANALYZERS |
| UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| ISO 17208-1:2016 | Underwater acoustics Quantities and procedures for description and measurement of underwater sound from ships Part 1: Requirements for precision measurements in deep water used for comparison purposes |
| UNE 206012:2017 | General characterization of the thermal energy storage systems for solar thermal power plants with parabolic trough collector technology |
| I.S. EN ISO 148-3:2016 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| I.S. EN 61788-15:2011 | SUPERCONDUCTIVITY - PART 15: ELECTRONIC CHARACTERISTIC MEASUREMENTS - INTRINSIC SURFACE IMPEDANCE OF SUPERCONDUCTOR FILMS AT MICROWAVE FREQUENCIES (IEC 61788-15:2011 (EQV)) |
| CEI EN 61788-18 : 2014 | SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
| ISO 26303:2012 | Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools |
| BS EN ISO 6506-2:2014 | Metallic materials. Brinell hardness test Verification and calibration of testing machines |
| NF EN ISO 14253-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| UNI EN ISO 389-9 : 2009 | ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 9: PREFERRED TEST CONDITIONS FOR THE DETERMINATION OF REFERENCE HEARING THRESHOLD LEVELS |
| NF EN ISO 13385-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPER - DESIGN AND METROLOGICAL CHARACTERISTICS |
| PREN 61577-2 : DRAFT 2017 | RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS (IEC 61577-2:2014, MODIFIED) |
| UNI EN ISO 13102 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS |
| OIML D 28 : 2004 | CONVENTIONAL VALUE OF THE RESULT OF WEIGHING IN AIR |
| UNE-EN 16012:2013 | Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance |
| UNI EN ISO 14720-1 : 2013 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS |
| NF EN 61400-12-1:2017 | WIND ENERGY GENERATION SYSTEMS - PART 12-1: POWER PERFORMANCE MEASUREMENTS OF ELECTRICITY PRODUCING WIND TURBINES |
| NF EN 62129-2 : 2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
| I.S. EN ISO 9612:2009 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| ASTM E 3063 : 2017 : REDLINE | Test Method for Antimony Content Using Neutron Activation Analysis (NAA) |
| I.S. EN ISO 15193:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| DIN EN ISO 7500-1:2016-05 | METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015) |
| EN ISO 14253-1:2017 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017) |
| ISO/IEC 18047-6:2017 | Information technology — Radio frequency identification device conformance test methods — Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
| EN ISO 12354-1:2017 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017) |
| DIN EN ISO 14253-1:2013-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013) |
| IEC 60462:2010 | Nuclear instrumentation - Photomultiplier tubes for scintillation counting - Test procedures |
| I.S. EN 60794-1-2:2017 | OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 19238:2014 | Radiological protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics |
| I.S. EN 61672-3:2013 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS |
| EN ISO 16610-61:2015 | Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015) |
| IEC TR 62617:2015 | Home laundry appliances - Uncertainty reporting of measurements |
| IEC TS 62600-200:2013 | Marine energy - Wave, tidal and other water current converters - Part 200: Electricity producing tidal energy converters - Power performance assessment |
| ISO 8196-1:2009 | Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 1: Analytical attributes of alternative methods |
| I.S. EN 62040-3:2011 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| IEC 62220-1-1:2015 | Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging |
| IEC 61526:2010 | Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters |
| IEC 62489-1:2010+AMD1:2014+AMD2:2017 CSV | Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components |
| DIN EN 13201-4:2016-06 | ROAD LIGHTING - PART 4: METHODS OF MEASURING LIGHTING PERFORMANCE |
| DIN EN ISO 14577-2:2015-11 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 14577-2:2015) |
| DIN EN ISO 14577-1:2015-11 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015 |
| DIN EN ISO 22674:2016-09 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
| DIN EN 1793-1:2015-06 (Draft) | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| DIN EN ISO 14577-4:2015-05 (Draft) | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016) |
| DIN EN 14662-3:2016-02 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| DIN EN ISO 9513:2013-05 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
| DIN EN 16242:2013-03 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| DIN EN 14789:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| DIN EN ISO 6974-1:2012-11 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| DIN EN 13771-2:2016-11 (Draft) | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| DIN EN ISO 6974-2:2012-11 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| UNE-EN 14662-3:2016 | Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography |
| UNE-EN ISO 6508-1:2017 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| UNE-EN ISO 6506-1:2015 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| BS EN 14154-2 : 2005 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| DIN EN ISO 20743:2013-12 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| ISO 16000-15:2008 | Indoor air — Part 15: Sampling strategy for nitrogen dioxide (NO2) |
| UNE-EN 61094-5:2017 | Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison |
| IEC 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| BS EN ISO 14532:2017 | Natural gas. Vocabulary |
| IEC 60060-2:2010 | High-voltage test techniques - Part 2: Measuring systems |
| BS EN 14154-3 : 2005 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| ISO 6789-1:2017 | Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance |
| ISO 25178-70:2014 | Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures |
| IEC 60318-1:2009 | Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones |
| ISO 13225:2012 | Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics |
| BS EN ISO 20743:2013 | Textiles. Determination of antibacterial activity of textile products |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| BS EN 14792:2017 | Stationary source emissions. Determination of mass concentration of nitrogen oxides. Standard reference method. Chemiluminescence |
| BS EN ISO 15212-2:2002 | Oscillation-type density meters Process instruments for homogeneous liquids |
| BS EN ISO 3744:2010 | Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane |
| UNE-ISO 26303:2013 | Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools |
| BS EN ISO 5436-2:2012 | Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards Software measurement standards |
| DIN EN ISO 8253-3:2012-08 | Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012) |
| ONORM EN ISO 13385-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011) |
| EN ISO 13161:2015 | Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011) |
| ECMA 275 : 3ED 2015 | MEASUREMENT OF STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES |
| I.S. EN 1267:2012 | INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
| I.S. EN ISO 6974-1:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
| I.S. EN ISO 8253-3:2012 | ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY (ISO 8253-3:2012) |
| I.S. EN 482:2012 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| I.S. EN 14792:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
| I.S. EN ISO 10723:2012 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| I.S. EN 14791:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
| I.S. EN ISO 2178:2016 | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| I.S. EN 14789:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| I.S. EN ISO 3747:2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
| I.S. EN ISO 10846-1:2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| I.S. EN ISO 772:2011 | HYDROMETRY - VOCABULARY AND SYMBOLS |
| I.S. EN ISO 3743-1:2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
| I.S. EN ISO 6926:2016 | ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS (ISO 6926:2016) |
| I.S. EN 13804:2013 | FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - GENERAL CONSIDERATIONS AND SPECIFIC REQUIREMENTS |
| I.S. EN ISO 6506-1:2014 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| DIN EN ISO 11200:1996-07 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014) |
| I.S. EN ISO 11204:2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
| I.S. EN ISO 3745:2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012) |
| ASHRAE GUIDELINE 14 : 2014 | MEASUREMENT OF ENERGY, DEMAND, AND WATER SAVINGS |
| DIN EN 1776:2016-05 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN ISO 6974-2:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
| DIN EN ISO 10723:2013-04 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| IEC 60942:2017 RLV | Electroacoustics - Sound calibrators |
| I.S. EN ISO 15011-1:2009 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 1: DETERMINATION OF FUME EMISSION RATE DURING ARC WELDING AND COLLECTION OF FUME FOR ANALYSIS |
| I.S. EN ISO 3741:2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
| I.S. EN 14790:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| I.S. EN ISO 19901-5:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 5: WEIGHT CONTROL DURING ENGINEERING AND CONSTRUCTION (ISO 19901-5:2016) |
| I.S. EN ISO 10846-2:2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| I.S. EN ISO 8253-1:2010 | ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 1: PURE-TONE AIR AND BONE CONDUCTION AUDIOMETRY |
| I.S. EN 16242:2012 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| I.S. EN ISO 1:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STANDARD REFERENCE TEMPERATURE FOR THE SPECIFICATION OF GEOMETRICAL AND DIMENSIONAL PROPERTIES (ISO 1:2016) |
| DIN EN ISO 15011-1:2010-03 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009) |
| I.S. EN ISO 6976:2016 | NATURAL GAS - CALCULATION OF CALORIFIC VALUES, DENSITY, RELATIVE DENSITY AND WOBBE INDICES FROM COMPOSITION (ISO 6976:2016) |
| EN ISO 6926:2016 | Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
| I.S. EN ISO 8311:2013 | REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - CALIBRATION OF MEMBRANE TANKS AND INDEPENDENT PRISMATIC TANKS IN SHIPS - MANUAL AND INTERNAL ELECTRO-OPTICAL DISTANCE-RANGING METHODS (ISO 8311:2013) |
| I.S. EN ISO 15011-3:2009 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 3: DETERMINATION OF OZONE EMISSION RATE DURING ARC WELDING |
| I.S. EN ISO 4074:2015 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| I.S. EN ISO 3744:2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| I.S. EN ISO 9513:2012 | METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012) |
| I.S. EN 15058:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
| I.S. EN ISO 14532:2017 | NATURAL GAS - VOCABULARY (ISO 14532:2014) |
| I.S. EN ISO 6974-5:2014 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 5: ISOTHERMAL METHOD FOR NITROGEN, CARBON DIOXIDE, C[1] TO C[5] HYDROCARBONS AND C[6+] HYDROCARBONS (ISO 6974-5:2014) |
| I.S. EN 13771-2:2017 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| I.S. EN ISO 5436-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012) |
| I.S. EN ISO 14577-4:2016 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016) |
| I.S. EN 13201-4:2015 | ROAD LIGHTING - PART 4: METHODS OF MEASURING LIGHTING PERFORMANCE |
| DIN EN ISO 6506-2:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| I.S. EN 1793-1:2017 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| I.S. EN ISO 14577-3:2015 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015) |
| CEI EN 61000-4-20 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES |
| I.S. EN 1811:2011 | REFERENCE TEST METHOD FOR RELEASE OF NICKEL FROM ALL POST ASSEMBLIES WHICH ARE INSERTED INTO PIERCED PARTS OF THE HUMAN BODY AND ARTICLES INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN |
| I.S. EN ISO 6508-1:2016 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6508-1:2016) |
| I.S. EN 1776:2015 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| DIN EN ISO 16000-15:2009-04 | INDOOR AIR - PART 15: SAMPLING STRATEGY FOR NITROGEN DIOXIDE (NO[2]) |
| DIN EN 1811:2015-10 | Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin (includes Amendment A1:2015) |
| EN 61094-3:2016/AC:2017-01 | ELECTROACOUSTICS - MEASUREMENT MICROPHONES - PART 3: PRIMARY METHOD FOR FREE-FIELD CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE |
| I.S. EN ISO 10882-1:2011 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 1: SAMPLING OF AIRBORNE PARTICLES (ISO 10882-1:2011) |
| I.S. EN 14181:2014 | STATIONARY SOURCE EMISSIONS - QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS |
| EN 60456:2016 | Clothes washing machines for household use - Methods for measuring the performance |
| I.S. EN ISO 14577-1:2015 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 1: TEST METHOD (ISO 14577-1:2015) |
| I.S. EN ISO 11202:2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS |
| I.S. EN 14662-3:2015 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| I.S. EN ISO 11201:2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS |
| I.S. EN ISO 3746:2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE |
| I.S. EN ISO 22674:2016 | DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES (ISO 22674:2016) |
| OVE/ONORM EN 61757-1 : 2013 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012) |
| EN 60794-1-2:2017/AC:2017-07 | OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE (IEC 60794-1-2:2017) |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| DIN EN 16909:2017-06 | AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS |
| ASME B89.7.3.3 : 2002 : R2007 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| VDI/VDE 2631-10 : 2014 COR 2015 | FORM MEASUREMENT - DETERMINATION OF THE UNCERTAINTY OF FORM MEASUREMENTS |
| VDI 2048 Blatt 1:2000-10 | Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals |
| ASME B89.1.6 : 2002 : R2012 | MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES |
| VDI/VDE/DGQ/DKD 2622 Blatt 2:2015-08 | Calibration of measuring equipment for electrical quantities - Methods for the determination of the uncertainty of measurement |
| VDI/VDE 3519 Blatt 1:2002-10 | Level measurement of liquids and solids (bulk solids) |
| ASME B89.7.3.3:2002 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| VDI 3766:2012-09 | Ultrasound - Workplace - Measurement, assessment, judgement and reduction |
| ASME B5.57 : 2012 | METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS |
| VDI 3794 Blatt 2:2013-07 | Determination of depositon fluxes of ambient air pollutants - Determination of the deposition flux of ammonia and ammonium compounds by means of the IRMA method |
| ASME B5.57 : 2012 : R2017 | METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS |
| VDI/VDE 2630 Blatt 2.1:2015-06 | Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors |
| VDI 2878 Blatt 4:2016-05 | Application of thermography to maintenance diagnostics - Equipment technology |
| VDI 3431:2016-08 | Bending of profiles - Testing notes for profile bending elements |
| ASME B89.7.3.3 : 2002 : R2012 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| ASME B89.1.6 : 2002 : R2007 | MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES |
| ASME B89.7.3.3 : 2002 : R2017 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| ASME B89.1.6 : 2002 | MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES |
| BS EN 62321-1:2013 | Determination of certain substances in electrotechnical products Introduction and overview |
| UNE-EN 16450:2017 | Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) |
| UNE-EN 16211:2016 | Ventilation for buildings - Measurement of air flows on site - Methods |
| IES LM 79 FRENCH : 2008 | ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF SOLID-STATE LIGHTING PRODUCTS |
| I.S. EN ISO 10703:2015 | WATER QUALITY - DETERMINATION OF THE ACTIVITY CONCENTRATION OF RADIONUCLIDES - METHOD BY HIGH RESOLUTION GAMMA-RAY SPECTROMETRY (ISO 10703:2007) |
| UNE-EN 61400-11:2013 | Wind turbines - Part 11: Acoustic noise measurement techniques |
| DIN EN ISO 25178-601:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| CEI EN 62040-3 : 2015 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| I.S. EN ISO 6145-7:2010 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 7: THERMAL MASS-FLOW CONTROLLERS |
| CEI EN 61260-2 : 2017 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS |
| DIN ISO 17123-1:2016-02 (Draft) | OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 1: THEORY (ISO 17123-1:2014) |
| I.S. EN 16909:2017 | AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS |
| BS EN 61280-4-2:2014 | Fibre-optic communication subsystem test procedures Installed cable plant. Single-mode attenuation and optical return loss measurement |
| IEC TS 62607-3-2:2017 | Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion |
| DIN EN ISO 13225:2012-08 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| 15/30317142 DC : 0 | BS EN ISO 15011-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 1: DETERMINATION OF FUME EMISSION RATE DURING ARC WELDING AND COLLECTION OF FUME FOR ANALYSIS |
| 10/30094845 DC : 0 | BS ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC TEST ROOMS AND HEMI-ANECHOIC TEST ROOMS |
| 17/30346182 DC : 0 | BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS HAVING PERIODIC STRUCTURES |
| ISO 16638-1:2015 | Radiological protection — Monitoring and internal dosimetry for specific materials — Part 1: Inhalation of uranium compounds |
| ECA ILAC P14 : 2013 | ILAC POLICY FOR UNCERTAINTY IN CALIBRATION |
| I.S. EN 61157:2007 | STANDARD MEANS FOR THE REPORTING OF THE ACOUSTIC OUTPUT OF MEDICAL DIAGNOSTIC ULTRASONIC EQUIPMENT (IEC 61157:2007 (EQV)) |
| BS EN 61260-3:2016 | Electroacoustics. Octave-band and fractional-octave-band filters Periodic tests |
| DIN EN ISO 29661 : 2018 COR 1 2018 | REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS (ISO 29661:2012, INCLUDING AMD 1:2015) |
| DIN EN 16909 E : 2017 | AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS |
| BS EN ISO 13161:2015 | Water quality. Measurement of polonium 210 activity concentration in water by alpha spectrometry |
| BS EN ISO 11704:2015 | Water quality. Measurement of gross alpha and beta activity concentration in non-saline water. Liquid scintillation counting method |
| DIN EN ISO 22007-6:2015-05 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
| ISO 20581:2016 | Workplace air General requirements for the performance of procedures for the measurement of chemical agents |
| BS EN 61788-19:2014 | Superconductivity Mechanical properties measurement. Room temperature tensile test of reacted Nb<sub>3</sub>Sn composite superconductors |
| BS EN ISO 15112:2014 | Natural gas. Energy determination |
| 13/30275372 DC : 0 | BS ISO 13164-4 - WATER QUALITY - RADON-222 - PART 4: TEST METHOD USING TWO-PHASE LIQUID SCINTILLATION COUNTING |
| ISO/TR 12748:2015 | Natural Gas Wet gas flow measurement in natural gas operations |
| DKD-R 3-1-3 : 2003 | KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - TEIL 3: SINUS- UND MULTISINUS-ANREGUNG |
| 16/30339681 DC : 0 | BS ISO 19685 - VACUUM TECHNOLOGY - VACUUM GAUGES - SPECIFICATIONS, CALIBRATION AND MEASUREMENT UNCERTAINTIES FOR PIRANI GAUGES |
| DIN EN ISO 22007-4:2016-10 (Draft) | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017) |
| BS EN ISO 27971:2015 | Cereals and cereal products. Common wheat (Triticum aestivum L.). Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology |
| ECA 10-10 : 2012 | DETERMINATION OF PITCH DIAMETER OF PARALLEL THREAD GAUGES BY MECHANICAL PROBING |
| UNI EN ISO 16000-15 : 2008 | INDOOR AIR - PART 15: SAMPLING STRATEGY FOR NITROGEN DIOXIDE (NO[2]) |
| 11/30244161 DC : 0 | BS EN 50400:2006/FPRAA - BASIC STANDARD TO DEMONSTRATE THE COMPLIANCE OF FIXED EQUIPMENT FOR RADIO TRANSMISSION (110 MHZ - 40 GHZ) INTENDED FOR USE IN WIRELESS TELECOMMUNICATION NETWORKS WITH THE BASIC RESTRICTIONS OR THE REFERENCE LEVELS RELATED TO GENERAL PUBLIC EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELDS, WHEN PUT INTO SERVICE |
| BS EN 15841:2009 | Ambient air quality. Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition |
| DIN ISO 362-2:2010-05 | Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category (ISO 362-2:2009) |
| BS ISO 13160 : 2012 | WATER QUALITY - STRONTIUM 90 AND STRONTIUM 89 - TEST METHODS USING LIQUID SCINTILLATION COUNTING OR PROPORTIONAL COUNTING |
| BS ISO 11665-4:2012 | Measurement of radioactivity in the environment. Air: radon-222 Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis |
| BS EN ISO 1938-2:2017 | Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges |
| ISO 16413:2013 | Evaluation of thickness, density and interface width of thin films by X-ray reflectometry Instrumental requirements, alignment and positioning, data collection, data analysis and reporting |
| BS EN ISO 22007-6:2015 | Plastics. Determination of thermal conductivity and thermal diffusivity Comparative method for low thermal conductivities using a temperature-modulation technique |
| PD ISO/TR 14069:2013 | Greenhouse gases. Quantification and reporting of greenhouse gas emissions for organizations. Guidance for the application of ISO 14064-1 |
| ISO/ASTM 51940:2013 | Guide for dosimetry for sterile insects release programs |
| BS ISO 19467:2017 | Thermal performance of windows and doors. Determination of solar heat gain coefficient using solar simulator |
| 16/30326493 DC : 0 | BS EN ISO 14644-3 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
| DIN EN ISO 12354-1:2016-03 (Draft) | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO 12354-1:2017) |
| DIN EN ISO 16859-2:2016-02 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
| DIN EN ISO 148-2:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 2: VERIFICATION OF TESTING MACHINES (ISO 148-2:2016) |
| BS EN 55016-1-6 : 2015 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION |
| BS ISO 10523 : 2008 | WATER QUALITY - DETERMINATION OF PH |
| 12/30248587 DC : 0 | BS ISO 14577-1 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 1: TEST METHOD |
| DIN EN ISO 389-9:2009-12 | Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009) |
| DD ISO/TS 15530-4:2008 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation |
| BS EN ISO 25378:2011 | Geometrical product specifications (GPS). Characteristics and conditions. Definitions |
| BS EN 61094-5:2002 | Measurement microphones Methods for pressure calibration of working standard microphones by comparison |
| BS ISO 12749-4:2015 | Nuclear energy, nuclear technologies, and radiological protection. Vocabulary Dosimetry for radiation processing |
| ISO/IEC TR 18047-2:2006 | Information technology Radio frequency identification device conformance test methods Part 2: Test methods for air interface communications below 135 kHz |
| BS ISO 13164-1:2013 | Water quality. Radon-222 General principles |
| ECA EURAMET CG-22 : 2017 | GUIDELINES ON THE CALIBRATION OF AUTOCOLLIMATORS |
| PD CEN/TS 13649:2014 | Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Sorptive sampling method followed by solvent extraction or thermal desorption |
| 10/30186199 DC : 0 | BS ISO 11665-6 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 6: RADON-222: METHODS FOR ESTIMATION OF SURFACE EXHALATION RATE BY ACCUMULATION METHOD IN THE ENVIRONMENT |
| 15/30333610 DC : 0 | BS EN ISO 11819-2.2 - ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 2: THE CLOSE-PROXIMITY METHOD |
| CISPR 16-4-2:2011+AMD1:2014 CSV | Specification for radio disturbance and immunity measuring apparatusand methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
| CEI EN 61788-15 : 2012 | SUPERCONDUCTIVITY - PART 15: ELECTRONIC CHARACTERISTIC MEASUREMENTS - INTRINSIC SURFACE IMPEDANCE OF SUPERCONDUCTOR FILMS AT MICROWAVE FREQUENCIES |
| 10/30186187 DC : 0 | BS ISO 11665-2 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 2: RADON-222: INTEGRATED MEASUREMENT METHOD FOR THE DETERMINATION OF THE AVERAGE POTENTIAL ALPHA ENERGY CONCENTRATION OF SHORT-LIVED RADON DECAY PRODUCTS IN THE ATMOSPHERIC ENVIRONMENT |
| BS ISO 11358-3:2013 | Plastics. Thermogravimetry (TG) of polymers Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics |
| 15/30312397 DC : 0 | BS EN 16866 - METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST) |
| 09/30118717 DC : DRAFT OCT 2009 | BS ISO 230-1 - TEST CODE FOR MACHINE TOOLS - PART 1: GEOMETRIC ACCURACY OF MACHINES OPERATING UNDER NO-LOAD OR QUASI-STATIC CONDITIONS |
| BS ISO 16110-2:2010 | Hydrogen generators using fuel processing technologies Test methods for performance |
| BS EN 60601-2-8 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-8: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF THERAPEUTIC X-RAY EQUIPMENT OPERATING IN THE RANGE 10 KV TO 1 MV |
| ISO 24115:2012 | Green coffee — Procedure for calibration of moisture meters — Routine method |
| 10/30209057 DC : 0 | BS ISO 16000-6 - INDOOR AIR - PART 6: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS IN INDOOR AND TEST CHAMBER AIR BY ACTIVE SAMPLING ON TENAX TA SORBENT, THERMAL DESORPTION AND GAS CHROMATOGRAPHY USING MS/FID |
| UNE-EN ISO 17034:2017 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| BS ISO 18589-7 : 2013 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 7: IN SITU MEASUREMENT OF GAMMA-EMITTING RADIONUCLIDES |
| ISO 19214:2017 | Microbeam analysis — Analytical electron microscopy — Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy |
| BS EN ISO 15530-3:2011 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or measurement standards |
| PD CEN/TR 16625:2013 | Flexible sheets for waterproofing. Statistical definition of manufacturer\'s limiting value and declared value (MLV and MDV). 95 % Statistic |
| I.S. EN 15852:2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF TOTAL GASEOUS MERCURY |
| 13/30285160 DC : 0 | BS EN ISO 18674 - GEOTECHNICAL INVESTIGATION AND TESTING - GEOTECHNICAL MONITORING BY FIELD INSTRUMENTATION - GENERAL RULES |
| BS IEC 60747-14-4:2011 | Semiconductor devices. Discrete devices Semiconductor accelerometers |
| BS EN 60601-2-62:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
| I.S. EN ISO 3611:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| BS EN ISO 4064-2:2017 | Water meters for cold potable water and hot water Test methods |
| NF EN ISO 17201-3 : 2010 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 3: GUIDELINES FOR SOUND PROPAGATION CALCULATIONS |
| BS ISO 10302-1:2011 | Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Airborne noise measurement |
| 15/30289059 DC : 0 | BS ISO 17179 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF AMMONIA IN FLUE GAS - PERFORMANCE CHARACTERISTICS OF AUTOMATED MEASURING SYSTEMS |
| PD CEN/TR 16988:2016 | Estimation of uncertainty in the single burning item test |
| UNE-ISO 230-1:2014 | Machine-tools. Test code for machine tools -- Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions |
| PD ISO/TS 13471-1:2017 | Acoustics. Temperature influence on tyre/road noise measurement Correction for temperature when testing with the CPX method |
| BS EN ISO 9612:2009 | Acoustics. Determination of occupational noise exposure. Engineering method |
| BS ISO 11929:2010 | Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation. Fundamentals and application |
| I.S. EN 60404-15:2012 | MAGNETIC MATERIALS - PART 15: METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS |
| BS EN 60645-1:2017 | Electroacoustics. Audiometric equipment Equipment for pure-tone and speech audiometry |
| BS EN 16682:2017 | Conservation of cultural heritage. Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
| 14/30282337 DC : 0 | BS ISO 17123-8 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 8: GNSS FIELD MEASUREMENT SYSTEMS IN REAL-TIME KINEMATIC (RTK) |
| 13/30214530 DC : 0 | BS ISO 14385-1 - STATIONARY SOURCE EMISSIONS - GREEN HOUSE GASES - PART 1: CALIBRATION OF AUTOMATED MEASURING SYSTEMS |
| EN 1793-6:2012 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions |
| ISO 19229:2015 | Gas analysis Purity analysis and the treatment of purity data |
| DIN EN ISO 15112 E : 2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| UNE-EN 60794-1-20:2014 | Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions |
| BS 70000:2017 | Medical physics, clinical engineering and associated scientific services in healthcare. Requirements for quality, safety and competence |
| I.S. EN IEC 60068-3-6:2018 COR 2018 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
| ISO 8124-5:2015 | Safety of toys — Part 5: Determination of total concentration of certain elements in toys |
| BS ISO 13167:2015 | Water quality. Plutonium, americium, curium and neptunium. Test method using alpha spectrometry |
| 14/30301018 DC : 0 | BS EN 61094-5 ED 2.0 - MEASUREMENT MICROPHONES - PART 5: METHODS FOR PRESSURE CALIBRATION OF WORKING STANDARD MICROPHONES BY COMPARISON |
| BS ISO 28057 : 2014 | DOSIMETRY WITH SOLID THERMOLUMINESCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY |
| UNE-EN ISO 13160:2016 | Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012) |
| 12/30242242 DC : 0 | BS ISO 18589-7 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 7: IN SITU MEASUREMENT OF GAMMA-EMITTING RADIONUCLIDES |
| BS ISO 16413:2013 | Evaluation of thickness, density and interface width of thin films by X-ray reflectometry. Instrumental requirements, alignment and positioning, data collection, data analysis and reporting |
| 14/30313008 DC : 0 | BS ISO 16063-43 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 43: CALIBRATION OF ACCELEROMETERS BY MODEL-BASED PARAMETER IDENTIFICATION |
| BS EN 60500:2017 | Underwater acoustics. Hydrophones. Properties of hydrophones in the frequency range 1 Hz to 500 kHz |
| ASTM E 1732 : 2017-09 | TERMINOLOGY RELATING TO FORENSIC SCIENCE |
| UNI EN ISO 12999-1 : 2014 | ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION |
| 13/30282207 DC : 0 | BS EN 13032-4 - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
| ISO 22309:2011 | Microbeam analysis — Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above |
| 11/30196205 DC : 0 | BS ISO 2469 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE RADIANCE FACTOR (DIFFUSE REFLECTANCE FACTOR) |
| 10/30205316 DC : 0 | BS EN 61400-11 - WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| BS EN ISO 25178-602:2010 | Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments |
| BS EN 60469:2013 | Transitions, pulses and related waveforms. Terms, definitions and algorithms |
| I.S. EN ISO 9295:2015 | ACOUSTICS - DETERMINATION OF HIGH-FREQUENCY SOUND POWER LEVELS EMITTED BY MACHINERY AND EQUIPMENT (ISO 9295:2015) |
| BS EN 15267-4:2017 | Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| BS EN ISO 6892-1:2016 | Metallic materials. Tensile testing Method of test at room temperature |
| UNI EN 12405-2 : 2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| UNI CEI EN ISO 4064-2 : 2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| 12/30228759 DC : DRAFT JAN 2012 | BS ISO 13164-1 - WATER QUALITY - MEASUREMENT OF THE ACTIVITY CONCENTRATION OF RADON-222 - PART 1: GENERAL PRINCIPLES |
| BS ISO 20581:2016 | Workplace air. General requirements for the performance of procedures for the measurement of chemical agents |
| I.S. EN 16523-2:2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| CAN/CSA-ISO/IEC 18046-4:16 | Information technology Radio frequency identification device performance test methods Part 4: Test methods for performance of RFID gates in libraries (Adopted ISO/IEC 18046-4:2015, first edition, 2015-12-15) |
| EN ISO 9698:2015 | Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010) |
| 14/30296484 DC : 0 | BS EN 1793-5 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS |
| ECMA 109 : 7ED 2016 | DECLARED NOISE EMISSION VALUES OF INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| PD CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| 12/30257199 DC : 0 | BS ISO/IEC 18046-3 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 3: TEST METHODS FOR TAG PERFORMANCE |
| 13/30277798 DC : 0 | BS EN ISO 17892-2 - GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 2: DETERMINATION OF DENSITY OF FINE-GRAINED SOIL (CONVERSION OF CEN ISO TS 17892-2 INTO EN) |
| UNE-EN ISO 13162:2016 | Water quality - Determination of carbon 14 activity - Liquid scintillation counting method (ISO 13162:2011) |
| BS EN 61788-11:2011 | Superconductivity Residual resistance ratio measurement. Residual resistance ratio of Nb<sub>3</sub>Sn composite superconductors |
| ISO 19361:2017 | Measurement of radioactivity — Determination of beta emitters activities — Test method using liquid scintillation counting |
| IEEE 1309-2013 REDLINE | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz |
| 10/30186196 DC : 0 | BS ISO 11665-5 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 5: RADON-222: CONTINUOUS MEASUREMENT METHODS OF RADON ACTIVITY CONCENTRATION IN THE ATMOSPHERIC ENVIRONMENT |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| 14/30301841 DC : 0 | BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| NF EN 60645-7 : 2010 | ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 7: INSTRUMENTS FOR THE MEASUREMENT OF AUDITORY BRAINSTEM RESPONSES |
| DD ISO/TS 28037:2010 | Determination and use of straight-line calibration functions |
| 11/30148484 DC : 0 | BS EN ISO 9513 - METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING |
| 11/30215957 DC : 0 | BS ISO 4377 - HYDROMETRIC DETERMINATIONS - FLOW MEASUREMENT IN OPEN CHANNELS USING STRUCTURES - FLAT-V WEIRS |
| 10/30215694 DC : 0 | BS ISO 18132-3 - REFRIGERATED HYDROCARBON FLUIDS AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK GAUGES - PART 3: AUTOMATIC TANK GAUGES FOR LIQUEFIED PETROLEUM AND CHEMICAL GASES ON BOARD MARINE CARRIERS AND FLOATING STORAGE |
| ASTM E 2919 : 2014 : REDLINE | Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose |
| BS EN 61788-5:2013 | Superconductivity Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires |
| 17/30327513 DC : DRAFT APR 2017 | BS EN ISO 11990 - LASERS AND LASER-RELATED EQUIPMENT - DETERMINATION OF LASER RESISTANCE OF TRACHEAL TUBE SHAFT AND TRACHEAL CUFFS |
| ISO 20785-1:2012 | Dosimetry for exposures to cosmic radiation in civilian aircraft Part 1: Conceptual basis for measurements |
| ISO 13166:2014 | Water quality Uranium isotopes Test method using alpha-spectrometry |
| 16/30319120 DC : 0 | BS ISO 20263 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - DETERMINATION METHOD FOR INTERFACE POSITION IN THE CROSS-SECTIONAL IMAGE OF THE LAYERED MATERIALS |
| BS EN 60154-4:2017 | Flanges for waveguides Relevant specifications for flanges for circular waveguides |
| BS EN 15842:2010 | Foodstuffs. Detection of food allergens. General considerations and validation of methods |
| 15/30330450 DC : 0 | BS EN 9138 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| DIN EN ISO 25178-70:2014-06 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| BS ISO 24496:2017 | Office furniture. Office chairs. Methods for the determination of dimensions |
| UNI ISO 11843-6 : 2014 | CAPABILITY OF DETECTION - PART 6: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE AND THE MINIMUM DETECTABLE VALUE IN POISSON DISTRIBUTED MEASUREMENTS BY NORMAL APPROXIMATIONS |
| DIN EN ISO 16859-1:2016-02 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015) |
| UNI EN ISO 15530-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS |
| BS ISO 18937:2014 | Imaging materials. Photographic reflection prints. Methods for measuring indoor light stability |
| ISO 24173:2009 | Microbeam analysis — Guidelines for orientation measurement using electron backscatter diffraction |
| BS EN 60318-4:2010 | Electroacoustics. Simulators of human head and ear Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts |
| BS EN ISO 14253-5:2015 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Uncertainty in verification testing of indicating measuring instruments |
| PD IEC/TR 61000-1-6:2012 | Electromagnetic compatibility (EMC) General. Guide to the assessment of measurement uncertainty |
| BS ISO 362-2:2009 | Measurement of noise emitted by accelerating road vehicles. Engineering method L category |
| BIS IS 1757-1 : 2014 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD |
| 10/30219236 DC : DRAFT DEC 2010 | BS ISO 22514-7 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| BS EN 61094-8:2012 | Electroacoustics. Measurement microphones Methods for determining the free-field sensitivity of working standard microphones by comparison |
| 14/30293544 DC : 0 | BS EN 14791 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
| 14/30293551 DC : 0 | BS EN 14790 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| BS ISO 16331-1:2017 | Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments Performance of handheld laser distance meters |
| 16/30339349 DC : DRAFT APR 2016 | BS EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| BS ISO 16578:2013 | Molecular biomarker analysis — General definitions and requirements for microarray detection of specific nucleic acid sequences |
| 11/30254162 DC : 0 | BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| PD IEC/TS 62492-2:2013 | Industrial process control devices. Radiation thermometers Determination of the technical data for radiation thermometers |
| BS ISO 16000-6:2011 | Indoor air Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
| BS EN 15980:2011 | Air quality. Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene |
| UNE-ISO 16269-6:2015 | Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals |
| EN 61788-17:2013 | Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films |
| 11/30218530 DC : DRAFT FEB 2011 | BS ISO 16331-1 - OPTICS AND OPTICAL INSTRUMENTS - LABORATORY PROCEDURES FOR TESTING SURVEYING AND CONSTRUCTION INSTRUMENTS - PART 1: PERFORMANCE OF HANDHELD LASER DISTANCE METERS |
| UNE-EN 61000-4-3:2007 | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| 10/30201065 DC : DRAFT DEC 2010 | BS EN ISO 13138 - AIR QUALITY - SAMPLING CONVENTIONS FOR AIRBORNE PARTICLE DEPOSITION IN THE HUMAN RESPIRATORY SYSTEM |
| BS ISO 18132-3:2011 | Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gauges Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage |
| UNE-EN 62058-31:2011 | Electricity metering equipment (a.c.) - Acceptance inspection -- Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C) |
| I.S. EN 15267-4:2017 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES |
| BS EN ISO 20785-2:2017 | Dosimetry for exposures to cosmic radiation in civilian aircraft Characterization of instrument response |
| DIN EN ISO 148-1:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
| BS EN 61000-4-20:2003 | Electromagnetic Compatibility (EMC) Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| DIN EN ISO 13138:2012-04 | Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012) |
| 13/30280551 DC : 0 | BS ISO 16840-6 - WHEELCHAIR SEATING - PART 6: SIMULATED USE AND DETERMINATION OF THE CHANGES IN PROPERTIES - SEAT CUSHIONS |
| 13/30276628 DC : 0 | BS EN 62704-3 ED 1.0 - DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN BODY FROM WIRELESS COMMUNICATIONS DEVICES; 30 MHZ - 6 GHZ - PART 3: SPECIFIC REQUIREMENTS FOR USING THE FINITE-DIFFERENCE TIME-DOMAIN (FDTD) METHOD FOR SAR CALCULATIONS OF MOBILE PHONES |
| IEC 62754:2017 | Computation of waveform parameter uncertainties |
| 12/30256716 DC : 0 | BS ISO/ASTM 51702 - PRACTICE FOR DOSIMETRY IN A GAMMA IRRADIATION FACILITY FOR RADIATION PROCESSING |
| BS EN 61000-4-22:2011 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Radiated emission and immunity measurements in fully anechoic rooms (FARs) |
| BS EN IEC 61400-12-2:2013 | Wind turbines Power performance of electricity-producing wind turbines based on nacelle anemometry |
| CEI EN 61788-19 : 2014 | SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS |
| BS ISO 8196-1:2009 | Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis Analytical attributes of alternative methods |
| 15/30289876 DC : 0 | BS EN ISO 148-1 - METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD |
| ISO 13474:2009 | Acoustics — Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment |
| 17/30349843 DC : 0 | BS EN ISO 11704 - WATER QUALITY - GROSS ALPHA AND GROSS BETA ACTIVITY - TEST METHOD USING LIQUID SCINTILLATION COUNTING |
| BS EN ISO 11608-5:2012 | Needle-based injection systems for medical use. Requirements and test methods Automated functions |
| I.S. EN ISO 16610-21:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011) |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| 17/30349807 DC : 0 | BS EN ISO 9698 - WATER QUALITY - TRITIUM - TEST METHOD USING LIQUID SCINTILLATION COUNTING |
| 12/30257202 DC : 0 | BS ISO/IEC 18047-6 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 6: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ |
| I.S. EN 61260-3:2016 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 3: PERIODIC TESTS |
| 17/30347911 DC : 0 | BS ISO 11929-3 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION - PART 3: APPLICATIONS TO UNFOLDING METHODS |
| I.S. EN 61400-13:2016 | WIND TURBINES - PART 13: MEASUREMENT OF MECHANICAL LOADS |
| BS ISO 16494:2014 | Heat recovery ventilators and energy recovery ventilators. Method of test for performance |
| DIN ISO 11352:2013-03 | WATER QUALITY - ESTIMATION OF MEASUREMENT UNCERTAINTY BASED ON VALIDATION AND QUALITY CONTROL DATA (ISO 11352:2012) |
| BS IEC 60462:2010 | Nuclear instrumentation. Photomultiplier tubes for scintillation counting. Test procedures |
| BS EN 62555:2014 | Ultrasonics. Power measurement. High intensity therapeutic ultrasound (HITU) transducers and systems |
| BS IEC 62607-3-1 : 2014 | NANOMANUFACTURING - KEY CONTROL CHARACTERISTICS - PART 3-1: LUMINESCENT NANOMATERIALS - QUANTUM EFFICIENCY |
| BS EN 60404-15 : 2012 | MAGNETIC MATERIALS - PART 15: METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS (IEC 60404-15:2012) |
| I.S. EN ISO 11819-2:2017 | ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 2: THE CLOSE-PROXIMITY METHOD (ISO 11819-2:2017) |
| BS ISO 18589-4:2009 | Measurement of radioactivity in the environment. Soil Measurement of plutonium isotopes (plutonium 238 and Plutonium 239 + 240) by alpha spectrometry |
| BS ISO 16730-1:2015 | Fire safety engineering. Procedures and requirements for verification and validation of calculation methods General |
| BS ISO 3567:2011 | Vacuum gauges. Calibration by direct comparison with a reference gauge |
| 15/30328565 DC : 0 | BS EN 60645-1 ED4.0 - ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AND SPEECH AUDIOMETRY |
| 16/30337302 DC : 0 | BS EN ISO 22007-4 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD |
| DIN EN ISO 14720-1:2013-06 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS (ISO 14720-1:2013) |
| BS EN 16913:2017 | Ambient air. Standard method for measurement of NO<sub>3</sub><sup>-</sup>, SO<sub>4</sub><sup>2-</sup>, Cl<sup>-</sup>, NH<sub>4</sub><sup>+</sup>, Na<sup>+</sup>, K<sup>+</sup>, Mg<sup>2+</sup>, Ca<sup>2+</sup> in PM2,5 as deposited on filters |
| UNI EN ISO 25178-602 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| PD ISO/TS 14411-1:2017 | Preparation of particulate reference materials Polydisperse material based on picket fence of monodisperse spherical particles |
| ISO 20785-3:2015 | Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at aviation altitudes |
| ISO 11665-4:2012 | Measurement of radioactivity in the environment Air: radon-222 Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis |
| PD ISO/TS 17865:2016 | Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems |
| 14/30303611 DC : 0 | BS EN ISO 19694-6 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 6: FERROALLOY INDUSTRY |
| BS EN 61788-4:2016 | Superconductivity Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors |
| 15/30275154 DC : 0 | BS ISO 18406 - UNDERWATER ACOUSTICS - MEASUREMENT OF UNDERWATER RADIATED SOUND FROM PERCUSSIVE PILE DRIVING |
| 12/30250460 DC : 0 | BS ISO 16378 - SPACE SYSTEMS - MEASUREMENTS OF THERMO-OPTICAL PROPERTIES OF THERMO CONTROL MATERIALS |
| 12/30251867 DC : 0 | BS EN ISO 16610-71 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS |
| UNE-EN ISO 16638-1:2018 | Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015) |
| 13/30255474 DC : 0 | BS ISO 7504 - GAS ANALYSIS - VOCABULARY |
| 12/30264187 DC : DRAFT MAY 2012 | BS EN 60318-3 - ELECTRO ACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 3: ACOUSTIC COUPLER FOR THE CALIBRATION OF SUPRA-AURAL EARPHONES USED IN AUDIOMETRY |
| 10/30208977 DC : 0 | BS EN ISO 11608-1 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS |
| UNI EN ISO 13199 : 2013 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOCS) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED ANALYSER EQUIPPED WITH CATALYTIC CONVERTER |
| BS ISO 16405:2015 | Room corner and open calorimeter. Guidance on sampling and measurement of effluent gas production using FTIR technique |
| BS ISO 16378:2013 | Space systems - Measurements of thermo-optical properties of thermal control materials |
| BS EN 16272-4:2016 | Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound diffraction under direct sound field |
| BS ISO 16254:2016 | Acoustics. Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation. Engineering method |
| 13/30263150 DC : 0 | BS EN ISO 16859-1 - METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD |
| IES LM 66 : 2014 | ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF SINGLE-BASED FLUORESCENT LAMPS |
| PD IEC/TS 62903:2018 | Ultrasonics. Measurements of electroacoustical parameters and acoustic output power of spherically curved transducers using the self-reciprocity method |
| BS EN 71-1 : 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| 17/30356073 DC : 0 | BS ISO 19101-2 - GEOGRAPHIC INFORMATION - REFERENCE MODEL - PART 2: IMAGERY |
| 14/30254042 DC : 0 | BS EN ISO 15004-2 - OPHTHALMIC INSTRUMENTS - FUNDAMENTAL REQUIREMENTS AND TEST METHODS - PART 2: LIGHT HAZARD PROTECTION |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| BS ISO 9698 : 2010 | WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD |
| 11/30211367 DC : DRAFT JULY 2011 | BS ISO 17123-4 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 4: ELECTRO-OPTICAL DISTANCE METERS (EDM INSTRUMENTS) |
| BS EN ISO 13102:2012 | Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics |
| 14/30288062 DC : 0 | BS EN 61377 ED. 2.0 - RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS |
| BS ISO 8672:2014 | Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method |
| 17/30352625 DC : DRAFT SEP 2017 | BS IEC 62282-8-101 ED1.0 - FUEL CELL TECHNOLOGIES - PART 8-101: ENERGY STORAGE SYSTEMS USING FUEL CELL MODULES IN REVERSE MODE - TEST PROCEDURES FOR SOLID OXIDE SINGLE CELL AND STACK PERFORMANCE INCLUDING REVERSING OPERATION |
| ISO 9277:2010 | Determination of the specific surface area of solids by gas adsorption — BET method |
| BS EN 62359 : 2011 | ULTRASONICS - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS |
| 15/30302184 DC : 0 | BS ISO 17208-1 - UNDERWATER ACOUSTICS - QUANTITIES AND PROCEDURES FOR DESCRIPTION AND PRECISION MEASUREMENT OF UNDERWATER SOUND FROM SHIPS - PART 1: REQUIREMENTS FOR PRECISION MEASUREMENTS IN DEEP WATER USED FOR COMPARISON PURPOSES |
| I.S. EN ISO 17450-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012) |
| BS ISO 12764:2017 | Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
| ASTM D 6552 : 2006 : R2011 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| I.S. EN 62751-2:2014 | POWER LOSSES IN VOLTAGE SOURCED CONVERTER (VSC) VALVES FOR HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - PART 2: MODULAR MULTILEVEL CONVERTERS |
| 14/30296672 DC : 0 | BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
| 16/30341489 DC : 0 | BS ISO 16063-44 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 44: CALIBRATION OF FIELD VIBRATION CALIBRATORS |
| I.S. EN 50629:2015 | ENERGY PERFORMANCE OF LARGE POWER TRANSFORMERS (U[M] > 36 KV OR S[R] >= 40 MVA) |
| UNE-EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
| EN 62220-1-1:2015 | Medical electrical equipment - Characteristics of digital x-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging |
| CEI EN 50379-2 : 2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN STATUTORY INSPECTIONS AND ASSESSMENT |
| BS ISO 4360:2008 | Hydrometry. Open channel flow measurement using triangular profile weirs |
| UNI EN ISO 16610-71 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS |
| PD ISO/IEC TR 18047-2:2006 | Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications below 135 kHz |
| CEI EN 61280-4-2 : 2015 | FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT |
| UNI EN ISO 3611 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| BS ISO 19581:2017 | Measurement of radioactivity. Gamma emitting radionuclides. Rapid screening method using scintillation detector gamma-ray spectrometry |
| UNI EN ISO 17201-5 : 2010 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 5: NOISE MANAGEMENT |
| ASHRAE GUIDELINE 2 : 2010 : R2014 | ENGINEERING ANALYSIS OF EXPERIMENTAL DATA |
| EN 62754:2017 | Computation of waveform Parameter uncertainties |
| CEI EN 61280-1-1 : 2014 | FIBRE OPTIC COMMUNICATION SUBSYSTEM BASIC TEST PROCEDURES - PART 1-1: TEST PROCEDURES FOR GENERAL COMMUNICATION SUBSYSTEMS - TRANSMITTER OUTPUT OPTICAL POWER MEASUREMENT FOR SINGLE-MODE OPTICAL FIBRE CABLE |
| PREN 13832-1 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
| 12/30264449 DC : DRAFT JULY 2012 | BS EN ISO 6974-5 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - ISOTHERMAL METHOD FOR NITROGEN, CARBON DIOXIDE, C1 TO C5 HYDROCARBONS AND C6+ HYDROCARBONS |
| ISO 14382:2012 | Workplace atmospheres — Determination of toluene diisocyanate vapours using 1-(2-pyridyl)piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors |
| I.S. EN 60469:2013 | TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS (IEC 60469:2013 (EQV)) |
| BS ISO 18589-5:2009 | Measurement of radioactivity in the environment. Soil Measurement of strontium 90 |
| BS ISO 17735:2009 | Workplace atmospheres. Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography |
| EN ISO 20743:2013 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| CSA ISO/IEC 18046-2:2013 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE |
| CSA ISO/IEC 18046-1 : 2013 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 1: TEST METHODS FOR SYSTEM PERFORMANCE |
| BS ISO 18899:2013 | Rubber. Guide to the calibration of test equipment |
| BS ISO 11665-5 : 2012 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 5: CONTINUOUS MEASUREMENT METHOD OF THE ACTIVITY CONCENTRATION |
| IEC 61000-4-31:2016 | Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test |
| ISO/TR 24094:2006 | Analysis of natural gas — Validation methods for gaseous reference materials |
| BS EN ISO 25178-70:2014 | Geometrical product specification (GPS). Surface texture: Areal Material measures |
| UNE-EN ISO 22007-6:2015 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014) |
| EN 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
| UNE-ISO/IEC 17007:2010 | Conformity assessment. Guidance for drafting normative documents suitable for use for conformity assessment |
| CSA C393 : 2012 | TEST METHODS FOR MEASURING POWER CONSUMPTION IN LOW AND IDLE POWER MODES OF COMMERCIAL AND INDUSTRIAL EQUIPMENT |
| DIN ISO 16592:2015-12 | MICROBEAM ANALYSIS - ELECTRON PROBE MICROANALYSIS - GUIDELINES FOR DETERMINING THE CARBON CONTENT OF STEELS USING A CALIBRATION CURVE METHOD (ISO 16592:2012) |
| CAN/CSA-IEC 61400-12-1:17 | Wind energy generation systems — Part 12-1: Power performance measurements of electricity producing wind turbines (Adopted IEC 61400-12-1:2017, second edition, 2017-03) | Systèmes de génération d’énergie éolienne — Partie 12-1 : Mesures de performance de puissance des éoliennes de production d’électricité (norme IEC 61400-12-1:2017 adoptée, deuxième édition, 2017-03) |
| ISO 1217:2009 | Displacement compressors Acceptance tests |
| IEC TS 62886:2016 | Electroacoustics - Hearing aids - Method for measuring electroacoustic performance up to 16 kHz |
| CSA N292.5 : 2011 | GUIDELINE FOR THE EXEMPTION OR CLEARANCE FROM REGULATORY CONTROL OF MATERIALS THAT CONTAIN, OR POTENTIALLY CONTAIN, NUCLEAR SUBSTANCES |
| DIN EN ISO 10846-5:2009-07 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| UNI ISO 22514-7:2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| IEC 60500:2017 | Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz |
| ISO 16063-42:2014 | Methods for the calibration of vibration and shock transducers Part 42: Calibration of seismometers with high accuracy using acceleration of gravity |
| CAN/CSA-ISO/IEC 18047-2:13 (R2017) | Information technology - Radio frequency identification device conformance test methods - Part 2: Test methods for air interface communications below 135 kHz (Adopted ISO/IEC 18047-2:2012, first edition, 2012-01-15) |
| PREN 9138 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| ASTM E 2930 : 2013 | Standard Practice for Pressure Decay Leak Test Method |
| I.S. EN 60601-2-62:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-62: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) EQUIPMENT |
| CSA ISO/IEC TR 18047-4 : 2005 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 4: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 2,45 GHZ |
| UNE-EN ISO 12999-1:2014 | Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
| ISO 16378:2013 | Space systems — Measurements of thermo-optical properties of thermal control materials |
| I.S. EN 50563:2011 | EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES |
| IEC 61788-23:2018 | Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors |
| BS EN 61094-3:2016 | Electroacoustics. Measurement microphones Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique |
| PREN 71-1 : DRAFT 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| EN 62209-1:2016 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
| DKD-R 3-3 : 2010 | CALIBRATION OF FORCE MEASURING DEVICES |
| I.S. EN 61788-6:2011 | SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS |
| CEI UNI ISO/IEC 17007 : 2012 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| UNI EN 15979 : 2011 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION |
| CEI EN 61180 : 1ED 2017 | HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS, TEST EQUIPMENT |
| UNI EN ISO 11608-5 : 2013 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS |
| DIN EN ISO 12311:2015-06 | Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15); German version EN ISO 12311:2013 |
| BS EN 61526:2013 | Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters |
| UNE-EN ISO 14064-1:2012 | Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006) |
| BS EN 60731:2012 | Medical electrical equipment. Dosimeters with ionization chambers as used in radiotherapy |
| IEC 60404-6:2003 | Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens |
| DKD-R 6-2-2 : 2002 | KALIBRIERUNG VON MESSMITTELN FUER VAKUUM - TEIL 2: MESSUNSICHERHEITEN |
| CSA Z24511 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES |
| ISO 29473:2010 | Fire tests — Uncertainty of measurements in fire tests |
| BS ISO 16610-30:2015 | Geometrical product specifications (GPS). Filtration Robust profile filters: Basic concepts |
| UNE-EN ISO 9698:2016 | Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010) |
| DKD-R 3-7 : 2010 | |
| CSA IEC 61400-11 : 2013(R 2018) | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| ISO 17123-4:2012 | Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM measurements to reflectors) |
| BS ISO 8769:2010 | Reference sources. Calibration of surface contamination monitors. Alpha-, beta- and photon emitters |
| DKD-R 3-9 : 2005 | KONTINUIERLICHE KALIBRIERUNG VON KRAFTAUFNEHMERN NACH DEM VERGLEICHSVERFAHREN |
| I.S. EN 61000-4-6:2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
| I.S. CEN/TS 17021:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF SULPHUR DIOXIDE BY INSTRUMENTAL TECHNIQUES |
| API MPMS CH22.3 : 2015 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 22.3: TESTING PROTOCOL FOR FLARE GAS METERING |
| CAN/CSA-ISO 11137-3:17 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control (Adopted ISO 11137-3:2017, second edition, 2017-06) |
| I.S. EN 61400-12-2:2013 | WIND TURBINES - PART 12-2: POWER PERFORMANCE OF ELECTRICITYPRODUCING WIND TURBINES BASED ON NACELLE ANEMOMETRY |
| I.S. EN 60060-2:2011 | HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS |
| BS EN ISO 10704:2015 | Water quality. Measurement of gross alpha and gross beta activity in non-saline water. Thin source deposit method |
| BS ISO 1217 : 2009 | DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS |
| I.S. EN 60846-1:2014 | RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS |
| S.R. CEN/TS 16272-7:2015 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 7: EXTRINSIC CHARACTERISTICS - IN SITU VALUES OF INSERTION LOSS |
| I.S. EN ISO 16610-85:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013) |
| I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| DIN EN ISO 11204:2010-10 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
| CISPR 16-1-1:2015 RLV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| BS EN 60601-2-37 : 2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT |
| BS EN ISO 9697:2017 | Water quality. Gross beta activity in non-saline water. Test method using thick source |
| I.S. EN ISO 6789-2:2017 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINLY (ISO 6789-2:2017) |
| I.S. EN 60645-1:2017 | ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AND SPEECH AUDIOMETRY |
| I.S. EN ISO 25139:2011 | STATIONARY SOURCE EMISSIONS - MANUAL METHOD FOR THE DETERMINATION OF THE METHANE CONCENTRATION USING GAS CHROMATOGRAPHY |
| PREN 407 : DRAFT 2017 | PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE) |
| EN 61745:2017 | End-face image analysis procedure for the calibration of optical fibre geometry test sets |
| ISO/TR 18105:2014 | Soil quality Detection of water soluble chromium(VI) using a ready-to-use test-kit method |
| I.S. EN 60318-1:2009 | ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 1: EAR SIMULATOR FOR THE MEASUREMENT OF SUPRA-AURAL AND CIRCUMAURAL EARPHONES |
| UNI EN 15980 : 2011 | AIR QUALITY - DETERMINATION OF THE DEPOSITION OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, BENZO[A]PYRENE, DIBENZ[A,H]ANTHRACENEAND INDENO[1,2,3-CD]PYRENE |
| API MPM CH22.6 : 2015 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 22.6: TESTING PROTOCOL FOR GAS CHROMATOGRAPHS |
| UNI EN ISO 25178-70 : 2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
| ISO 26367-2:2017 | Guidelines for assessing the adverse environmental impact of fire effluents — Part 2: Methodology for compiling data on environmentally significant emissions from fires |
| I.S. EN 61526:2013 | RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS (IEC 61526:2010 (MOD)) |
| ISO 18406:2017 | Underwater acoustics — Measurement of radiated underwater sound from percussive pile driving |
| IEC 61005:2014 | Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters |
| UNE-EN ISO 8015:2012 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| ISO 10843:1997 | Acoustics — Methods for the description and physical measurement of single impulses or series of impulses |
| OVE/ONORM EN 61400-12-2 : 2014 | WIND TURBINES - PART 12-2: POWER PERFORMANCE OF ELECTRICITY-PRODUCING WIND TURBINES BASED ON NACELLE ANEMOMETRY (IEC 61400-12-2:2013) |
| BIS IS 12762-4 : 2014 | PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION TRACEABILITY |
| ASTM E 2623 : 2014 : REDLINE | Standard Practice for Reporting Thermometer Calibrations |
| ISO/ASTM 52303:2015 | Guide for absorbed-dose mapping in radiation processing facilities |
| I.S. EN ISO 12569:2017 | THERMAL PERFORMANCE OF BUILDINGS AND MATERIALS - DETERMINATION OF SPECIFIC AIRFLOW RATE IN BUILDINGS - TRACER GAS DILUTION METHOD (ISO 12569:2017) |
| I.S. EN ISO 29661:2017 | REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS (ISO 29661:2012, INCLUDING AMD 1:2015) |
| OIML R 139 : 2007 | COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES |
| I.S. EN 61786-1:2014 | MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS |
| S.R. CEN/TR 17078:2017 | STATIONARY SOURCE EMISSIONS - GUIDANCE ON THE APPLICATION OF EN ISO 16911-1 |
| I.S. EN 61745:2017 | END-FACE IMAGE ANALYSIS PROCEDURE FOR THE CALIBRATION OF OPTICAL FIBRE GEOMETRY TEST SETS |
| I.S. EN 61400-12-1:2017 | WIND POWER GENERATION SYSTEMS - PART 12-1: POWER PERFORMANCE MEASUREMENT OF ELECTRICITY PRODUCING WIND TURBINES |
| EN ISO 6145-7:2010 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009) |
| ISO 21501-4:2007 | Determination of particle size distribution Single particle light interaction methods Part 4: Light scattering airborne particle counter for clean spaces |
| I.S. EN 60318-3:2015 | ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 3: ACOUSTIC COUPLER FOR THE CALIBRATION OF SUPRA-AURAL EARPHONES USED IN AUDIOMETRY |
| ISO/TS 14411-1:2017 | Preparation of particulate reference materials — Part 1: Polydisperse material based on picket fence of monodisperse spherical particles |
| I.S. EN ISO 14253-5:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 5: UNCERTAINTY IN VERIFICATION TESTING OF INDICATING MEASURING INSTRUMENTS (ISO 14253-5:2015) |
| I.S. EN 61400-11:2013 | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES (IEC 61400-11:2012 (EQV)) |
| BS ISO 6145-7 : 2009 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 7: THERMAL MASS-FLOW CONTROLLERS |
| S.R. CEN ISO/TS 16491:2012 | GUIDELINES FOR THE EVALUATION OF UNCERTAINTY OF MEASUREMENT IN AIR CONDITIONER AND HEAT PUMP COOLING AND HEATING CAPACITY TESTS (ISO/TS 16491:2012) |
| I.S. EN ISO 6145-6:2017 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC METHODS - PART 6: CRITICAL FLOW ORIFICES (ISO 6145-6:2017) |
| I.S. EN ISO 15011-4:2018 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 4: FUME DATA SHEETS (ISO 15011-4:2017) |
| UNE-EN ISO 9493:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010) |
| ANSI S1.15-2 : 2005 : R2010 | MEASUREMENT MICROPHONES - PART 2: PRIMARY METHOD FOR PRESSURE CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE |
| UNE 80407:2014 | Metrological control of measuring equipment used in the cement test |
| PREN ISO 17892-2 : DRAFT 2013 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 2: DETERMINATION OF DENSITY OF FINE-GRAINED SOIL (ISO 17892-2:2013) |
| UNI EN 1793-6 : 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
| UNE-EN ISO 18589-7:2016 | Measurement of radioactivity in the environment - Soil - Part 7: In situ measurement of gamma-emitting radionuclides (ISO 18589-7:2013) |
| ANSI S12.11-2 : 2013 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS |
| ANSI S12.11-1 : 2013 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 1: AIRBORNE NOISE MEASUREMENT |
| CSA ISO/IEC TR 18047-2 : 2006 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 2: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ |
| UNI EN ISO 22476-5 : 2013 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 5: FLEXIBLE DILATOMETER TEST |
| UNE-EN ISO 6145-5:2011 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009) |
| UNI CEN/TS 16272-5 : 2014 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS |
| I.S. EN 61788-16:2013 | SUPERCONDUCTIVITY - PART 16: ELECTRONIC CHARACTERISTIC MEASUREMENTS - POWER-DEPENDENT SURFACE RESISTANCE OF SUPERCONDUCTORS AT MICROWAVE FREQUENCIES (IEC 61788-16:2013 (EQV)) |
| ANSI S12.64-1 : 2009 : R2014 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF UNDERWATER SOUND FROM SHIPS - PART 1: GENERAL REQUIREMENTS |
| ECMA 275-1 : 4ED 2017 | MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 1: AIRBORNE NOISE MEASUREMENT |
| EN ISO 15651:2017 | Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method (ISO 15651:2015) |
| BS EN ISO 11665-1:2015 | Measurement of radioactivity in the environment. Air: radon-222 Origins of radon and its short-lived decay products and associated measurement methods |
| ES 202 706-1 : 1.5.1 | ENVIRONMENTAL ENGINEERING (EE); METRICS AND MEASUREMENT METHOD FOR ENERGY EFFICIENCY OF WIRELESS ACCESS NETWORK EQUIPMENT; PART 1: POWER CONSUMPTION - STATIC MEASUREMENT METHOD |
| CSA C22.2 No. 62471 : 2012 | PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS |
| ISO 10704:2009 | Water quality Measurement of gross alpha and gross beta activity in non-saline water Thin source deposit method |
| EN 16523-1:2015 | Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact |
| UNI EN ISO 13225 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
| ASTM G 213 : 2017 | Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers |
| UNE-ISO 230-2:2016 | Test code for machine tools -- Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes |
| ASTM E 3083 : 2017 | Standard Terminology Relating to Radiation Processing: Dosimetry and Applications |
| IPC TM 650-MDP : 2012 | IPC TEST METHOD DEVELOPMENT PACKET |
| ASTM E 2859 : 2011 : R2017 | Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy |
| UNE-EN ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) |
| CSA C22.2 No. 60601-2-62 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-62: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) EQUIPMENT |
| EN ISO 9696:2017 | Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017) |
| UNI CEI EN ISO/IEC 17043 : 2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| UNI ISO 3534-2 : 2014 | STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS |
| UNI EN ISO 25139 : 2011 | STATIONARY SOURCE EMISSIONS - MANUAL METHOD FOR THE DETERMINATION OF THE METHANE CONCENTRATION USING GAS CHROMATOGRAPHY |
| ASTM D 3648 : 2014 : REDLINE | Standard Practices for the Measurement of Radioactivity (Withdrawn 2023) |
| ISO 9296:2017 | Acoustics — Declared noise emission values of information technology and telecommunications equipment |
| EN ISO 80601-2-61:2011 | Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2011) |
| EN ISO 12569:2017 | Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017) |
| ISO/IEC 18046-1:2011 | Information technology — Radio frequency identification device performance test methods — Part 1: Test methods for system performance |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| EN 388 : 1994 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
| ISO/IEC TR 18047-6:2011 | Information technology Radio frequency identification device conformance test methods Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
| ISO 14385-2:2014 | Stationary source emissions — Greenhouse gases — Part 2: Ongoing quality control of automated measuring systems |
| EN ISO 13943:2017 | Fire safety - Vocabulary (ISO 13943:2017) |
| ISO 12749-4:2015 | Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 4: Dosimetry for radiation processing |
| BS EN 388 : 2016 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
| EN 1793-5:2016 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions |
| IEC 61724-1:2017 | Photovoltaic system performance - Part 1: Monitoring |
| API 551 : 2016 | PROCESS MEASUREMENT |
| DIN EN 71-1:2015-02 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| ISO 17091:2013 | Workplace air — Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide — Method by measurement of corresponding cations by suppressed ion chromatography |
| ISO 16730-1:2015 | Fire safety engineering Procedures and requirements for verification and validation of calculation methods Part 1: General |
| ISO 15651:2015 | Nuclear energy — Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets — Inert gas extraction and conductivity detection method |
| ISO 16110-2:2010 | Hydrogen generators using fuel processing technologies — Part 2: Test methods for performance |
| I.S. EN 61672-2:2013 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| ISO 5-2:2009 | Photography and graphic technology — Density measurements — Part 2: Geometric conditions for transmittance density |
| I.S. EN 60904-4:2009 | PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION TRACEABILITY |
| IEC 62209-1:2016 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
| IEC TS 62600-101:2015 | Marine energy - Wave, tidal and other water current converters - Part 101: Wave energy resource assessment and characterization |
| IEC PAS 63083:2017 | Specific absorption rate (SAR) measurement procedure for long term evolution (LTE) devices |
| I.S. EN 61207-1:2010 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 1: GENERAL |
| UNE-EN 1793-2:2014 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions |
| IEC 60404-10:2016 | Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies |
| ISO 11665-6:2012 | Measurement of radioactivity in the environment Air: radon-222 Part 6: Spot measurement method of the activity concentration |
| IEC TR 62797:2013 | International comparison of measurements of the magnetic moment using vibrating sample magnetometers (VSM) and superconducting quantum interference device (SQUID) magnetometers |
| EN 62586-2:2017 | Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements |
| IEC 60601-2-75:2017 | Medical electrical equipment - Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment |
| IEC 61400-12-1:2017 | Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines |
| I.S. EN 50380:2017 | MARKING AND DOCUMENTATION REQUIREMENTS FOR PHOTOVOLTAIC MODULES |
| IEC TS 60318-7:2017 | Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of air-conduction hearing aids |
| DIN EN ISO 6926:2016-08 | Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
| DIN EN ISO 10882-1:2012-01 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator\'s breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| DIN EN ISO 15011-1:2015-03 (Draft) | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 1: DETERMINATION OF FUME EMISSION RATE DURING ARC WELDING AND COLLECTION OF FUME FOR ANALYSIS |
| DIN EN 14181:2015-02 | Stationary source emissions - Quality assurance of automated measuring systems |
| DIN EN ISO 15011-3:2010-03 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009) |
| DIN EN ISO 3747:2011-03 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
| DIN EN ISO 2178:2015-01 (Draft) | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| UNI EN ISO 11202 : 2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS |
| DIN EN ISO 3741:2011-01 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
| DIN EN 482:2015-12 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents (includes Amendment A1:2015) |
| DIN EN ISO 10846-1:2008-11 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| DIN EN ISO 11608-1:2015-04 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| ISO 1:2016 | Geometrical product specifications (GPS) Standard reference temperature for the specification of geometrical and dimensional properties |
| IEC 62282-3-200:2015 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| UNE-EN ISO 6974-2:2013 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| UNE-EN ISO 6974-1:2013 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| UNE-EN ISO 11665-1:2016 | Measurement of radioactivity in the environment - Air: radon-222 - Part 1: Origins of radon and its short-lived decay products and associated measurement methods (ISO 11665-1:2012) |
| BS EN ISO 6974-5:2014 | Natural gas. Determination of composition and associated uncertainty by gas chromatography Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons |
| IEC 60645-6:2009 | Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions |
| IEC 60645-7:2009 | Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses |
| BS EN ISO 21649:2009 | Needle-free injectors for medical use. Requirements and test methods |
| ISO 6926:2016 | Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
| UNE-EN ISO 20743:2014 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| UNE-EN ISO 14577-2:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015) |
| BS EN ISO 6789:2003 | Assembly tools for screws and nuts. Hand torque tools. Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
| ISO 9612:2009 | Acoustics Determination of occupational noise exposure Engineering method |
| UNE-EN 14791:2017 | Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method |
| IEC 61180:2016 | High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment |
| ISO 12311:2013 | Personal protective equipment — Test methods for sunglasses and related eyewear |
| ISO 463:2006 | Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges |
| IEC 60601-2-37:2007+AMD1:2015 CSV | Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
| IEC 61260-1:2014 | Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications |
| IEC 61094-2:2009 | Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique |
| UNE-EN ISO 10882-1:2012 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| UNE-EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| IEC 61672-3:2013 | Electroacoustics - Sound level meters - Part 3: Periodic tests |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| BS EN ISO 9513:2012 | Metallic materials. Calibration of extensometer systems used in uniaxial testing |
| ISO 13161:2011 | Water quality Measurement of polonium 210 activity concentration in water by alpha spectrometry |
| DIN EN 14792:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
| UNE-EN ISO 8253-1:2011 | Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010) |
| ISO 3747:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
| ISO 16641:2014 | Measurement of radioactivity in the environment — Air — Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors |
| ISO 3741:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms |
| UNE-EN ISO 6926:2016 | Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
| UNE-EN ISO 6142-1:2016 | Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015) |
| IEC 61788-5:2013 | Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ISO 21649:2006 | Needle-free injectors for medical use — Requirements and test methods |
| ISO 10846-2:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| IEC 61788-15:2011 | Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies |
| ISO/TS 15530-1:2013 | Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 1: Overview and metrological characteristics |
| CSA N288.3.4 : 2013 | PERFORMANCE TESTING OF NUCLEAR AIR-CLEANING SYSTEMS AT NUCLEAR FACILITIES |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| EN ISO 12999-1:2014 | Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
| UNE-ISO 6107-2:2010 | Water quality. Vocabulary. Part 2. |
| UNE-EN 62271-100:2011 | High-voltage switchgear and controlgear -- Part 100: Alternating-current circuit-breakers |
| UNE-EN 14154-3:2005 | Water meters - Part 3 : Test methods and equipment |
| IEC 60404-6:2018 RLV | Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens |
| EN ISO 6506-2:2014 | Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
| UNE-EN 1811:2011 | Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin |
| EN 55016-4-2:2011/A1:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY |
| UNE-EN 14154-2:2005 | Water meters - Part 2 : Installation and conditions of use |
| I.S. EN ISO 13385-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
| EN ISO 13385-2:2011 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
| ASTM E 603 : 2017 : REDLINE | Standard Guide for Room Fire Experiments |
| N288.3.4-13 (R2018) | Performance testing of nuclear air-cleaning systems at nuclear facilities |
| NASA HDBK 7009 : 2013 | NASA HANDBOOK FOR MODELS AND SIMULATIONS: AN IMPLEMENTATION GUIDE FOR NASA-STD-7009 |
| EN ISO 11704:2015 | Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method (ISO 11704:2010) |
| EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| ONORM EN ISO 13385-2 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011) |
| ONORM EN ISO 11200 : 2014 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014) |
| ONORM EN ISO 6141 : 2015 | GAS ANALYSIS - CONTENTS OF CERTIFICATES FOR CALIBRATION GAS MIXTURES (ISO 6141:2015) |
| EN ISO 16859-3:2015 | Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015) |
| EN ISO 8253-1:2010 | Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010) |
| EN ISO 6974-2:2012 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| EN ISO 15011-1:2009 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009) |
| EN ISO 6789-1:2017 | Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017) |
| EN 14662-3:2015 | Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography |
| EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| EN ISO 22007-4:2017 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017) |
| EN ISO 772:2011 | Hydrometry - Vocabulary and symbols (ISO 772:2011) |
| EN ISO 16000-26:2012 | Indoor air - Part 26: Sampling strategy for carbon dioxide (CO2) (ISO 16000-26:2012) |
| EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| UNI EN ISO 10846-5 : 2009 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| UNI EN ISO 3744 : 2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| UNI EN ISO 463 : 2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
| UNI EN ISO 10846-1 : 2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| UNI EN ISO 11204 : 2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
| UNI EN ISO 8311 : 2014 | REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - CALIBRATION OF MEMBRANE TANKS AND INDEPENDENT PRISMATIC TANKS IN SHIPS - MANUAL AND INTERNAL ELECTRO-OPTICAL DISTANCE-RANGING METHODS |
| UNI EN ISO 11904-1 : 2006 | ACOUSTICS - DETERMINATION OF SOUND IMMISSION FROM SOUND SOURCES PLACED CLOSE TO THE EAR - PART 1: TECHNIQUE USING A MICROPHONE IN A REAL EAR (MIRE TECHNIQUE) |
| UNI EN ISO 10882-1 : 2012 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 1: SAMPLING OF AIRBORNE PARTICLES |
| UNI EN 13804 : 2013 | FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - GENERAL CONSIDERATIONS AND SPECIFIC REQUIREMENTS |
| UNI EN 1267 : 2012 | INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
| UNI EN ISO 15011-1 : 2010 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 1: DETERMINATION OF FUME EMISSION RATE DURING ARC WELDING AND COLLECTION OF FUME FOR ANALYSIS |
| UNI EN ISO 3095 : 2013 | ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES |
| UNI EN ISO 11201 : 2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| UNI EN ISO 10846-2 : 2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| EN 50383 : 2010 COR 2013 | BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ) |
| UNI EN ISO 3746 : 2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE |
| UNI EN ISO 16911-1 : 2013 | STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD |
| UNI EN ISO 15212-2 : 2005 | OSCILLATION-TYPE DENSITY METERS - PART 2: PROCESS INSTRUMENTS FOR HOMOGENEOUS LIQUIDS |
| UNI EN ISO 3747 : 2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
| UNI EN 14154-3 : 2011 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| UNI EN 14154-2 : 2011 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| EN 1793-1:2017 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions |
| UNI EN ISO 5436-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS |
| UNI EN ISO 10523 : 2012 | WATER QUALITY - DETERMINATION OF PH |
| UNI EN ISO 3741 : 2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
| UNI EN ISO 6974-2 : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
| UNI EN ISO 6974-1 : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| UNI EN ISO 3743-1 : 2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
| UNI EN 16242 : 2013 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| UNI EN ISO 9513 : 2013 | METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING |
| ONORM EN ISO 8253-3 : 2012 | ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY (ISO 8253-3:2012) |
| UNI EN ISO 15193 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| UNI EN ISO 8253-1 : 2010 | ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 1: PURE-TONE AIR AND BONE CONDUCTION AUDIOMETRY |
| UNI EN ISO 16000-26 : 2012 | INDOOR AIR - PART 26: SAMPLING STRATEGY FOR CARBON DIOXIDE (CO[2]) |
| UNI EN ISO 15011-2 : 2010 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 2: DETERMINATION OF THE EMISSION RATES OF CARBON MONOXIDE (CO), CARBON DIOXIDE (CO[2]), NITROGEN MONOXIDE (NO) AND NITROGEN DIOXIDE (NO[2]) DURING ARC WELDING, CUTTING AND GOUGING |
| EN 31010:2010 | Risk management - Risk assessment techniques |
| UNI EN ISO 10723 : 2013 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS |
| ISO/IEC 10373-6:2016 | Identification cards Test methods Part 6: Proximity cards |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| BS ISO 7503-3:2016 | Measurement of radioactivity. Measurement and evaluation of surface contamination Apparatus calibration |
| Z316.8-18 | Requirements for the design, development, and validation of laboratory-developed tests used for the screening, diagnosis, and management of clinical conditions |
| 17/30309711 DC : 0 | BS EN ISO 13473-1 - CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH |
| I.S. EN 61757-1:2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV)) |
| DIN EN ISO 25139:2011-08 | Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011) |
| BS EN 60060-1:2010 | High-voltage test techniques General definitions and test requirements |
| 11/30217192 DC : 0 | BS EN ISO 4064-2 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| BS EN 62129-2:2011 | Calibration of wavelength/optical frequency measurement instruments Michelson interferometer single wavelength meters |
| DIN EN 15852:2010-11 | Ambient air quality - Standard method for the determination of total gaseous mercury |
| 14/30275192 DC : 0 | BS EN ISO 6926 - ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS |
| BIS IS/ISO/IEC GUIDE 43-1 : 1997 | PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS - GUIDELINES - PART 1: DEVELOPMENT AND OPERATION OF PROFICIENCY TESTING SCHEME |
| UNE-EN ISO 148-3:2017 | Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
| DIN EN ISO 148-3:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| BS ISO 11665-11:2016 | Measurement of radioactivity in the environment. Air: radon-222 Test method for soil gas with sampling at depth |
| DIN EN ISO 11771:2011-04 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| ISO/IEC 18046-3:2012 | Information technology Radio frequency identification device performance test methods Part 3: Test methods for tag performance |
| 17/30321967 DC : 0 | BS ISO/IEC 20435-1 - WORKPLACE ATMOSPHERES - PART 1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR TOXIC GASES |
| DIN EN ISO 11202:2010-10 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| DIN EN ISO 22007-3:2012-04 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008) |
| BIS IS/IEC 60060-2 : 2010 | HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS |
| BS EN ISO 15194:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation |
| 15/30268151 DC : 0 | BS EN ISO 14577-4 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS |
| CSA Z24512 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
| DIN EN ISO 6145-5:2011-03 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009) |
| DIN ISO 20785-2:2016-08 | Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011) |
| 13/30264511 DC : 0 | BS ISO/ASTM 52628 - STANDARD PRACTICE FOR DOSIMETRY IN RADIATION PROCESSING |
| IEC 60846-1:2009 | Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors |
| I.S. EN ISO/IEC 17043:2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| BS EN 62209-1:2016 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
| CAN/CSA-ISO/IEC TR 18047-3:13 (R2017) | Information technology - Radio frequency identification device conformance test methods - Part 3: Test methods for air interface communications at 13,56 MHz (Adopted ISO/IEC TR 18047-3:2011, second edition, 2011-06-01) |
| BS EN ISO 11665-7:2015 | Measurement of radioactivity in the environment. Air: radon-222 Accumulation method for estimating surface exhalation rate |
| BS ISO 6145-5 : 2009 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 5: CAPILLARY CALIBRATION DEVICES |
| 09/30206298 DC : 0 | BS EN 16011 - PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| 14/30293548 DC : 0 | BS EN 14792 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
| I.S. EN 60500:2017 | UNDERWATER ACOUSTICS - HYDROPHONES - PROPERTIES OF HYDROPHONES IN THE FREQUENCY RANGE 1 HZ TO 500 KHZ |
| I.S. EN 62479:2010 | ASSESSMENT OF THE COMPLIANCE OF LOW POWER ELECTRONIC AND ELECTRICAL EQUIPMENT WITH THE BASIC RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (10 MHZ TO 300 GHZ) |
| 17/30352613 DC : 0 | BS IEC 63001 ED1.0 - MEASUREMENT AND EVALUATION OF THE CAVITATION NOISE |
| UNI ISO 11843-5 : 2014 | CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| DIN EN ISO 13102:2012-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012) |
| BS ISO 17208-1:2016 | Underwater acoustics. Quantities and procedures for description and measurement of underwater sound from ships Requirements for precision measurements in deep water used for comparison purposes |
| ISO 2425:2010 | Hydrometry Measurement of liquid flow in open channels under tidal conditions |
| I.S. EN ISO 17201-3:2010 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 3: GUIDELINES FOR SOUND PROPAGATION CALCULATIONS |
| 12/30271500 DC | BS ISO GUIDE 80. Guidance for in-house production of reference materials for quality control (QCMs) |
| 14/30291684 DC : 0 | BS ISO 9296 - ACOUSTICS - DECLARED NOISE EMISSION VALUES OF INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS |
| PD ISO/TS 16840-12:2015 | Wheelchair seating Apparatus and method for cushion envelopment testing |
| CEI EN 61094-8 : 2013 | ELECTROACOUSTICS - MEASUREMENT MICROPHONES - PART 8: METHODS FOR FREE-FIELD CALIBRATION OF WORKING STANDARD MICROPHONES BY COMPARISON |
| CEI EN 61094-2 : 2014 | ELECTROACOUSTICS - MEASUREMENT MICROPHONES PART 2: PRIMARY METHOD FOR THE PRESSURE CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE |
| PD CEN/TS 16272-5:2014 | Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound reflection under direct sound field conditions |
| 17/30345272 DC : 0 | BS ISO 14167 - GAS ANALYSIS - GENERAL QUALITY ASPECTS AND METROLOGICAL TRACEABILITY OF CALIBRATION GAS MIXTURES |
| 11/30255884 DC : 0 | BS EN 61094-8 ED.1 - ELECTROACOUSTICS - MEASUREMENT MICROPHONES - PART 8: METHODS FOR FREE-FIELD CALIBRATION OF WORKING STANDARD MICROPHONES BY COMPARISON |
| 10/30217333 DC : 0 | BS EN 16101 - WATER QUALITY - GUIDANCE STANDARD ON THE DESIGN AND ANALYSIS OF INTERLABORATORY COMPARISON STUDIES FOR ECOLOGICAL ASSESSMENT |
| ISO 532-1:2017 | Acoustics — Methods for calculating loudness — Part 1: Zwicker method |
| 13/30273788 DC : 0 | BS ISO 11819-2 - ACOUSTICS - METHOD FOR MEASURING THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 2: CLOSE-PROXIMITY METHOD |
| BS EN 61788-16:2013 | Superconductivity Electronic characteristic measurements. Power-dependent surface resistance of superconductors at microwave frequencies |
| UNI EN ISO 15011-3 : 2010 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 3: DETERMINATION OF OZONE EMISSION RATE DURING ARC WELDING |
| ISO 11352:2012 | Water quality — Estimation of measurement uncertainty based on validation and quality control data |
| UNI CEN ISO/TS 15530-1 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS |
| 12/30245706 DC : 0 | BS EN ISO 20743 - TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS |
| BS EN 62810:2015 | Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods |
| DIN EN ISO 13385-1:2011-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011) |
| ISO 11952:2014 | Surface chemical analysis Scanning-probe microscopy Determination of geometric quantities using SPM: Calibration of measuring systems |
| NF ISO 9698 : 2011 | WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD |
| UNI EN ISO 21649 : 2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| DIN ISO 362-1:2016-08 (Draft) | MEASUREMENT OF NOISE EMITTED BY ACCELERATING ROAD VEHICLES - ENGINEERING METHOD - PART 1: M AND N CATEGORIES (ISO 362-1:2015) |
| 17/30309708 DC : 0 | BS EN ISO 3740 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS |
| PD ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| 17/30309590 DC : 0 | BS IEC 61563 ED 2.0 - RADIATION PROTECTION INSTRUMENTATION - EQUIPMENT FOR MEASURING SPECIFIC ACTIVITY OF GAMMA-EMITTING RADIONUCLIDES IN FOODSTUFFS |
| 14/30283706 DC : 0 | BS ISO 18589-2 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 2: GUIDANCE FOR THE SELECTION OF THE SAMPLING STRATEGY, SAMPLING AND PRE-TREATMENT OF SAMPLES |
| 16/30322212 DC : DRAFT APR 2016 | BS EN 61724-1 ED 1.0 - PHOTOVOLTAIC SYSTEM PERFORMANCE - PART 1: MONITORING |
| DIN EN ISO 15194:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| BS EN 19694-1:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries General aspects |
| ISO 26906:2015 | Hydrometry Fishpasses at flow measurement structures |
| 15/30322612 DC : 0 | BS ISO 16063-17 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 17: PRIMARY CALIBRATION BY CENTRIFUGE |
| ISO 18941:2017 | Imaging materials Colour reflection prints Test method for ozone gas fading stability |
| UNI ISO/TS 15530-4 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 4: EVALUATING TASK-SPECIFIC MEASUREMENT UNCERTAINTY USING SIMULATION |
| NFM 60 809 : 2011 | NUCLEAR ENERGY - MEASUREMENT OF THE RADIOACTIVITY IN THE ENVIRONMENT - WATER - MEASUREMENT OF LEAD 210 ACTIVITY BY LIQUID SCINTILLATION IN WATER |
| 13/30277750 DC : 0 | BS ISO 9697 - WATER QUALITY - MEASUREMENT OF GROSS BETA ACTIVITY IN NON-SALINE WATER - THICK SOURCE METHOD |
| UNI EN ISO 16610-21 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS |
| DIN ISO 16063-16:2015-11 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 16: CALIBRATION BY EARTH'S GRAVITATION (ISO 16063-16:2014) |
| BS ISO 21438-2:2009 | Workplace atmospheres. Determination of inorganic acids by ion chromatography Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) |
| 16/30344766 DC : 0 | BS EN 62442-2 ED1.0/A1 - ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 2: CONTROLGEAR FOR HIGH INTENSITY DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR |
| 17/30344899 DC : 0 | BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS |
| BS EN 61400-13:2016 | Wind turbines Measurement of mechanical loads |
| DIN EN ISO 3744:2011-02 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| BS ISO 17534-1:2015 | Acoustics. Software for the calculation of sound outdoors Quality requirements and quality assurance |
| BS EN ISO 148-3:2016 | Metallic materials. Charpy pendulum impact test Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| ISO 17211:2015 | Stationary source emissions Sampling and determination of selenium compounds in flue gas |
| 11/30243401 DC : 0 | BS ISO 3567 - VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE |
| I.S. EN ISO 9697:2017 | WATER QUALITY - GROSS BETA ACTIVITY IN NON-SALINE WATER - TEST METHOD USING THICK SOURCE (ISO 9697:2015) |
| BS EN ISO 10523:2012 | Water quality. Determination of pH |
| 09/30195924 DC : 0 | BS ISO 16000-3 - INDOOR AIR - PART 3: DETERMINATION OF FORMALDEHYDE AND OTHER CARBONYL COMPOUNDS - ACTIVE SAMPLING METHOD |
| 13/30259881 DC : 0 | BS ISO 22007-6 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE |
| DIN EN ISO 16859-3:2016-02 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS (ISO 16859-3:2015) |
| ISO 8769:2016 | Reference sources Calibration of surface contamination monitors Alpha-, beta- and photon emitters |
| 14/30293541 DC : 0 | BS EN 14789 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN (O2) - STANDARD REFERENCE METHOD - PARAMAGNETISM |
| PD IEC/TR 62797:2013 | International comparison of measurements of the magnetic moment using vibrating sample magnetometers (VSM) and superconducting quantum interference device (SQUID) magnetometers |
| BS ISO 18132-1:2011 | Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gauges Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage |
| BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
| 16/30299911 DC : 0 | BS ISO 21501-4 - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SINGLE PARTICLE LIGHT INTERACTION METHODS - PART 4: LIGHT SCATTERING AIRBORNE PARTICLE COUNTER FOR CLEAN SPACES |
| DD CEN ISO/TS 17892-6:2004 | Geotechnical investigation and testing. Laboratory testing of soils Fall cone test |
| 12/30258004 DC : 0 | BS ISO 17091 - WORKPLACE AIR - DETERMINATION OF LITHIUM HYDROXIDE, SODIUM HYDROXIDE, POTASSIUM HYDROXIDE AND CALCIUM DIHYDROXIDE - METHOD BY MEASUREMENT OF CORRESPONDING CATIONS BY SUPPRESSED ION CHROMATOGRAPHY |
| CSA ISO 50015 : 2015 | ENERGY MANAGEMENT SYSTEMS - MEASUREMENT AND VERIFICATION OF ENERGY PERFORMANCE OF ORGANIZATIONS - GENERAL PRINCIPLES AND GUIDANCE |
| ISO 29201:2012 | Water quality — The variability of test results and the uncertainty of measurement of microbiological enumeration methods |
| DIN EN ISO 13162:2015-11 | Water quality - Determination of carbon 14 activity - Liquid scintillation counting method (ISO 13162:2011) |
| 13/30263153 DC : 0 | BS EN ISO 16859-2 - METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES |
| 12/30229938 DC : 0 | BS IEC 61577-2 ED 2.0 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS |
| BS EN 62058-31:2010 | Electricity metering equipment (a.c.). Acceptance inspection Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C) |
| 16/30344770 DC : 0 | BS EN 62442-3 ED1.0/A1 - ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 3: CONTROLGEAR FOR HALOGEN LAMPS AND LED MODULES - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR |
| 11/30173018 DC : 0 | BS EN ISO 15189 - MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| NF EN ISO 9493 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
| BS EN ISO 16610-21:2012 | Geometrical product specifications (GPS). Filtration Linear profile filters: Gaussian filters |
| 12/30241725 DC : 0 | BS ISO 28057 - DOSIMETRY WITH SOLID THERMOLUMINSCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY |
| DIN ISO 15767:2010-10 | Workplace atmospheres - Controlling and characterizing uncertainty in weighing collected aerosols (ISO 15767:2009) |
| BS EN 62220-1-1:2015 | Medical electrical equipment. Characteristics of digital x-ray imaging devices Determination of the detective quantum efficiency. Detectors used in radiographic imaging |
| 11/30215954 DC : 0 | BS ISO 4359 - LIQUID FLOW MEASUREMENT IN OPEN CHANNELS - RECTANGULAR, TRAPEZOIDAL AND U-SHAPED FLUMES |
| BS EN 60060-2:1995 | High-voltage test techniques Measuring systems |
| BS PAS 139(2012) : 2012 | DETECTION AND CHARACTERIZATION OF MANUFACTURED NANO-OBJECTS IN COMPLEX MATRICES - GUIDE |
| DIN EN 16272-6:2014-12 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions |
| 10/30229130 DC : 0 | BS EN 62321-1 ED 1 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTRO TECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW |
| ISO 11704:2010 | Water quality Measurement of gross alpha and beta activity concentration in non-saline water Liquid scintillation counting method |
| PD IEC/TS 61724-3:2016 | Photovoltaic system performance Energy evaluation method |
| I.S. EN 50383:2010 | BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ) |
| 11/30247495 DC : DRAFT MAY 2011 | BS EN 61280-1-1 - FIBRE OPTIC COMMUNICATION SUBSYSTEM BASIC TEST PROCEDURES - PART 1-1: TEST PROCEDURES FOR GENERAL COMMUNICATION SUBSYSTEMS - TRANSMITTER OUTPUT OPTICAL POWER MEASUREMENT FOR SINGLE-MODE OPTICAL FIBRE CABLE |
| BS ISO 11040-4:2015 | Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| BS EN ISO 11665-2:2015 | Measurement of radioactivity in the environment. Air: radon-222 Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products |
| BS EN ISO 13160:2015 | Water quality. Strontium 90 and strontium 89. Test methods using liquid scintillation counting or proportional counting |
| 09/30194820 DC : 0 | BS EN 60731 - MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY |
| PD IEC/TR 61282-11:2012 | Fibre optic communication system design guides Multimode launch conditions |
| 17/30356046 DC : DRAFT AUG 2017 | BS EN ISO 17201-1 - ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT |
| UNE-EN ISO 16610-21:2013 | Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011) |
| BS ISO 24115:2012 | Green coffee. Procedure for calibration of moisture meters. Routine method |
| 14/30316056 DC : 0 | BS ISO/GUIDE 31 - REFERENCE MATERIALS - CONTENTS OF CERTIFICATES, LABELS AND ACCOMPANYING DOCUMENTATION |
| BS EN ISO 8015:2011 | Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules |
| 13/30261629 DC : 0 | BS EN 62792 - ELECTROSHOCK WEAPON MEASUREMENT METHOD |
| ANSI S12.51 : 2012 : R2017 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
| BS ISO 13165-1:2013 | Water quality. Radium-226 Test method using liquid scintillation counting |
| I.S. EN ISO 9493:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
| 16/30315793 DC : 0 | BS ISO/IEC 18047-6 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 6: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ |
| BS EN ISO 11665-6:2015 | Measurement of radioactivity in the environment. Air: radon-222 Spot measurement method of the activity concentration |
| SAE AIR5925A | Measurement Uncertainty Applied to Cost-Effective Testing |
| I.S. EN 50564:2011 | ELECTRICAL AND ELECTRONIC HOUSEHOLD AND OFFICE EQUIPMENT - MEASUREMENT OF LOW POWER CONSUMPTION |
| BS ISO 20263:2017 | Microbeam analysis. Analytical electron microscopy. Method for the determination of interface position in the cross-sectional image of the layered materials |
| FD ISO/TR 14253-6 : 2013 FD | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 6: GENERALIZED DECISION RULES FOR THE ACCEPTANCE AND REJECTION OF INSTRUMENTS AND WORKPIECES |
| BS EN 19694-6:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries Ferroalloy industry |
| 14/30256681 DC : 0 | BS ISO 13165-3 - WATER QUALITY - MEASUREMENT OF RADIUM-226 - PART 3: TEST METHOD USING COPRECIPITATION AND GAMMA-SPECTROMETRY |
| 12/30253588 DC : 0 | BS EN 62751-2 - DETERMINATION OF POWER LOSSES IN VOLTAGE SOURCED CONVERTER (VSC) VALVES FOR HVDC SYSTEMS - PART 2: MODULAR MULTILEVEL CONVERTERS |
| 16/30294393 DC : 0 | BS ISO 19467 - THERMAL PERFORMANCE OF WINDOWS AND DOORS - DETERMINATION OF SOLAR HEAT GAIN COEFFICIENT USING SOLAR SIMULATOR |
| 13/30268568 DC : 0 | BS ISO 16063-42 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 42: CALIBRATION OF SEISMOMETERS WITH HIGH ACCURACY USING ACCELERATION OF GRAVITY |
| PD IEC/TS 62600-201:2015 | Marine energy. Wave, tidal and other water current converters Tidal energy resource assessment and characterization |
| 15/30317578 DC : 0 | BS ISO 16700 - MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION |
| BS ISO 16000-3:2011 | Indoor air Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air. Active sampling method |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| 16/30298316 DC : 0 | BS ISO 19581 - MEASUREMENT OF RADIOACTIVITY - GAMMA EMITTING RADIONUCLIDES - RAPID TEST METHOD USING NAI(TL) GAMMA-RAY SPECTROMETRY |
| NF EN ISO 15193 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| PD ISO/TR 13587:2012 | Three statistical approaches for the assessment and interpretation of measurement uncertainty |
| 17/30323249 DC : DRAFT MAY 2017 | BS ISO 4037-4 - RADIOLOGICAL PROTECTION - X AND GAMMA REFERENCE RADIATION FOR CALIBRATING DOSEMETERS AND DOSERATE METERS AND FOR DETERMINING THEIR RESPONSE AS A FUNCTION OF PHOTON ENERGY - PART 4: CALIBRATION OF AREA AND PERSONAL DOSEMETERS IN LOW ENERGY X REFERENCE RADIATION FIELDS |
| BS EN 1793-4:2015 | Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound diffraction |
| BS EN ISO 21258:2010 | Stationary source emissions. Determination of the mass concentration of dinitrogen monoxide (N2O). Reference method. Non-dispersive infrared method |
| BS EN ISO 13162:2015 | Water quality. Determination of carbon 14 activity. Liquid scintillation counting method |
| BS EN ISO 6789-2:2017 | Assembly tools for screws and nuts. Hand torque tools Requirements for calibration and determination of measurement uncertainty |
| 13/30273499 DC : 0 | BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| BS ISO 26101:2017 | Acoustics. Test methods for the qualification of free-field environments |
| 14/30287994 DC : 0 | BS ISO 13167 - WATER QUALITY - PLUTONIUM, AMERICIUM, CURIUM AND NEPTUNIUM - TEST METHOD USING ALPHA SPECTROMETRY |
| BS EN 16603-10-09:2014 | Space engineering. Reference coordinate system |
| PD IEC/TS 62600-101:2015 | Marine energy. Wave, tidal and other water current converters Wave energy resource assessment and characterization |
| ISO 16700:2016 | Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification |
| ISO/TS 21432:2005 | Non-destructive testing Standard test method for determining residual stresses by neutron diffraction |
| BS EN 61094-2:2009 | Electroacoustics. Measurement microphones Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique |
| ISO 3567:2011 | Vacuum gauges — Calibration by direct comparison with a reference gauge |
| ISO 5151:2017 | Non-ducted air conditioners and heat pumps — Testing and rating for performance |
| ASTM D 6552 : 2006 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| BS ISO 362-3:2016 | Measurement of noise emitted by accelerating road vehicles. Engineering method Indoor testing M and N categories |
| CEI EN 61400-12-2 : 2013 | WIND TURBINES - PART 12-2: POWER PERFORMANCE OF ELECTRICITY PRODUCING WIND TURBINES BASED ON NACELLE ANEMOMETRY |
| DIN EN ISO 13160:2016-03 | Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012) |
| PREN 14325 : DRAFT 2016 | PROTECTIVE CLOTHING AGAINST CHEMICALS - TEST METHODS AND PERFORMANCE CLASSIFICATION OF CHEMICAL PROTECTIVE CLOTHING MATERIALS, SEAMS, JOINS AND ASSEMBLAGES |
| CEI EN 61400-11 : 2014 | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| BS EN ISO 8041-1:2017 | Human response to vibration. Measuring instrumentation General purpose vibration meters |
| DIN ISO 13165-1:2015-11 | WATER QUALITY - RADIUM-226 - PART 1: TEST METHOD USING LIQUID SCINTILLATION COUNTING (ISO 13165-1:2013) |
| 18/30355802 DC : DRAFT APR 2018 | BS EN 60904-4 - PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION |
| 15/30318313 DC : 0 | BS EN 15267-4 - AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCE |
| 14/30265645 DC : 0 | BS ISO 7503-3 - MEASUREMENT OF RADIOACTIVITY - MEASUREMENT AND EVALUATION OF SURFACE CONTAMINATION - PART 3: APPARATUS CALIBRATION |
| BS ISO 26906:2015 | Hydrometry. Fishpasses at flow measurement structures |
| 13/30266220 DC : 0 | BS ISO 8672 - AIR QUALITY - DETERMINATION OF THE NUMBER CONCENTRATION OF AIRBORNE INORGANIC FIBRES BY PHASE CONTRAST OPTICAL MICROSCOPY - MEMBRANE FILTER METHOD |
| BS EN 62387-1:2012 | Radiation protection instrumentation. Passive integrating dosimetry systems for environmental and personal monitoring General characteristics and performance requirements |
| 13/30292662 DC : 0 | BS EN 61260-2 ED.1.0 - ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN EVALUATION TESTS |
| BS ISO 17123-8:2015 | Optics and optical instruments. Field procedures for testing geodetic and surveying instruments GNSS field measurement systems in real-time kinematic (RTK) |
| BS ISO 18406:2017 | Underwater acoustics. Measurement of radiated underwater sound from percussive pile driving |
| BS EN ISO 17201-3:2010 | Acoustics. Noise from shooting ranges Guidelines for sound propagation calculations |
| BS EN 61260-2 : 2016 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS |
| PD IEC/TR 62627-04:2012 | Fibre optic interconnecting devices and passive components Example of uncertainty calculation: Measurement of the attenuation of an optical connector |
| CSA ISO/IEC TR 18047-3:2013 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 3: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS BELOW 13,56 KHZ |
| BS EN 61000-4-31:2017 | Electromagnetic compatibility (EMC) Testing and measurement techniques. AC mains ports broadband conducted disturbance immunity test |
| BS ISO 2314:2009 | Gas turbines. Acceptance tests |
| PD ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace |
| BS ISO 13473-5 : 2009 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
| 16/30327521 DC : 0 | BS EN ISO 11554 - LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS |
| CEI EN 62321-1 : 2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW |
| 13/30263156 DC : 0 | BS EN ISO 16859-3 - METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS |
| I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| DIN EN ISO 17201-5:2010-06 | Acoustics - Noise from shooting ranges - Part 5: Noise management (ISO 17201-5:2010) |
| BS ISO 9277:2010 | Determination of the specific surface area of solids by gas adsorption. BET method |
| BS EN ISO 16610-30:2017 | Geometrical product specifications (GPS). Filtration Robust profile filters: Basic concepts |
| DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| UNE-EN 61000-4-6:2014 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| BS EN 62522:2014 | Calibration of tuneable laser sources |
| I.S. EN ISO 17034:2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS (ISO 17034:2016) |
| I.S. EN 61260-1:2014 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS |
| CEI EN 61400-12-1 : 2007 | WIND POWER GENERATION SYSTEMS - PART 12-1: POWER PERFORMANCE MEASUREMENT OF ELECTRICITY PRODUCING WIND TURBINES |
| 16/30290355 DC : 0 | BS EN ISO 6507-1 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
| 16/30275390 DC : 0 | BS ISO 532-1 - ACOUSTICS - METHODS FOR CALCULATING LOUDNESS - PART 1: ZWICKER METHOD |
| 15/30314076 DC : 0 | BS EN 16909 - AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) DEPOSITED ON FILTERS |
| 13/30278063 DC : 0 | BS ISO 20785-3 - DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 3: MEASUREMENTS AT AVIATION ALTITUDES |
| BS EN ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Cone meters |
| 13/30211355 DC : 0 | BS ISO 11358-3 - PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 3: DETERMINATION OF THE ACTIVATION ENERGY USING THE OZAWA-FRIEDMAN PLOT AND ANALYSIS OF THE REACTION KINETICS |
| BS ISO 80000-1 : 2009 | QUANTITIES AND UNITS - PART 1: GENERAL |
| BS EN 61788-18:2013 | Superconductivity Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| PD CEN/TR 17055:2017 | Workplace exposure. Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN 13936. Choice of procedures |
| 11/30217467 DC : 0 | BS ISO 17123-6 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 6: ROTATING LASERS |
| BS ISO 5129 : 2001 | ACOUSTICS - MEASUREMENT OF SOUND PRESSURE LEVELS IN THE INTERIOR OF AIRCRAFT DURING FLIGHT |
| 14/30295796 DC : 0 | BS ISO 19017 - GUIDE FOR GAMMA SPECTROMETRY MEASUREMENT OF RADIOACTIVE WASTE |
| BS ISO 14385-1:2014 | Stationary source emissions. Greenhouse gases Calibration of automated measuring systems |
| UNE-EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| DIN EN 16211:2015-09 | Ventilation for buildings - Measurement of air flows on site - Methods |
| BS EN 14793:2017 | Stationary source emissions. Demonstration of equivalence of an alternative method with a reference method |
| BS ISO 11665-3 : 2012 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 3: SPOT MEASUREMENT METHOD OF THE POTENTIAL ALPHA ENERGY CONCENTRATION OF ITS SHORT-LIVED DECAY PRODUCTS |
| BS ISO 230-1:2012 | Test code for machine tools Geometric accuracy of machines operating under no-load or quasi-static conditions |
| I.S. EN 31010:2010 | RISK MANAGEMENT - RISK ASSESSMENT TECHNIQUES (IEC/ISO 31010:2009 (EQV)) |
| BS IEC 61786-2:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Basic standard for measurements |
| BS EN ISO 16859-3:2015 | Metallic materials. Leeb hardness test Calibration of reference test blocks |
| 18/30329940 DC : DRAFT FEB 2018 | BS ISO 20046 - RADIOLOGICAL PROTECTION - PERFORMANCE CRITERIA FOR LABORATORIES USING FLUORESCENCE IN SITU HYBRIDIZATION (FISH) TRANSLOCATION ASSAY FOR ASSESSMENT OF OVEREXPOSURE TO IONIZING RADIATION |
| NF EN 60645-6 : 2010 | ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 6: INSTRUMENTS FOR THE MEASUREMENT OF OTOACOUSTIC EMISSIONS |
| 10/30186190 DC : 0 | BS ISO 11665-3 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 3: RADON-222: SPOT MEASUREMENT METHODS OF THE POTENTIAL ALPHA ENERGY CONCENTRATION OF SHORT-LIVED RADON DECAY PRODUCTS IN THE ATMOSPHERIC ENVIRONMENT |
| 12/30247187 DC : 0 | BS ISO 13165-2 - WATER QUALITY - RADIUM 226 - PART 2: TEST METHOD USING EMANOMETRY |
| BS EN 15979:2011 | Testing of ceramic raw and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation |
| I.S. EN 62321-8:2017 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 8: PHTHALATES IN POLYMERS BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS), GAS CHROMATOGRAPHY-MASS SPECTROMETRY USING A PYROLYZER/THERMAL DESORPTION ACCESSORY (PY/TD-GC-MS) |
| ISO/TS 21362:2018 | Nanotechnologies Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation |
| 15/30284301 DC : 0 | BS ISO 13253 - DUCTED AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| BS EN ISO 12999-1:2014 | Acoustics. Determination and application of measurement uncertainties in building acoustics Sound insulation |
| I.S. EN 62522:2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
| 14/30274840 DC : 0 | BS ISO 7503-1 - MEASUREMENT OF RADIOACTIVITY - MEASUREMENT AND EVALUATION OF SURFACE CONTAMINATION - PART 1: GENERAL PRINCIPLES |
| BS EN 62479:2010 | Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
| BS EN ISO 16911-1:2013 | Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts Manual reference method |
| BS EN ISO 13473-5:2009 | Characterization of pavement texture by use of surface profiles Determination of megatexture |
| PD ISO/TR 19319:2013 | Surface chemical analysis. Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods |
| ASTM E 2303 : 2015 : REDLINE | Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities |
| 10/30186193 DC : 0 | BS ISO 11665-4 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 4: RADON-222: INTEGRATED MEASUREMENT METHODS FOR THE DETERMINATION OF THE AVERAGE RADON ACTIVITY CONCENTRATION IN THE ATMOSPHERIC ENVIRONMENT USING PASSIVE SAMPLING AND DELAYED ANALYSIS |
| PD ISO/IEC TR 18047-3:2011 | Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications at 13,56 MHz |
| BS EN 61083-2:2013 | Instruments and software used for measurement in high-voltage and high-current tests Requirements for software for tests with impulse voltages and currents |
| I.S. EN 61788-18:2013 | SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
| BS ISO 10704 : 2009 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD |
| PD ISO/TR 16268:2009 | Surface chemical analysis. Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation |
| 14/30283939 DC : 0 | BS EN 15991 - TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV) |
| 17/30347905 DC : 0 | BS ISO 11929-1 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION - PART 1: ELEMENTARY APPLICATIONS |
| ISO 16592:2012 | Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method |
| BS ISO 29903:2012 | Guidance for comparison of toxic gas data between different physical fire models and scales |
| DIN EN 16523-1:2015-04 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| ANSI S12-5:2006 | ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS |
| BS ISO 15900:2009 | Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles |
| BS EN 16523-1 : 2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| BS EN 61000-4-21:2011 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Reverberation chamber test methods |
| ISO Guide 80:2014 | Guidance for the in-house preparation of quality control materials (QCMs) |
| NF EN 62475 : 2011 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
| BS EN ISO 4373:2008 | Hydrometry. Water level measuring devices |
| CSA N292.5 : 2011 : INC : UPD 1 : 2017 : R201600 | GUIDELINE FOR THE EXEMPTION OR CLEARANCE FROM REGULATORY CONTROL OF MATERIALS THAT CONTAIN, OR POTENTIALLY CONTAIN, NUCLEAR SUBSTANCES |
| BS EN 50379-1:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances General requirements and test methods |
| UNI EN ISO 22476-7 : 2013 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 7: BOREHOLE JACK TEST |
| IEC 62828-1:2017 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters |
| BS EN 16523-2:2015 | Determination of material resistance to permeation by chemicals Permeation by gaseous chemical under conditions of continuous contact |
| BS EN ISO 9295:2015 | Acoustics. Determination of high-frequency sound power levels emitted by machinery and equipment |
| ISO 21360-1:2012 | Vacuum technology Standard methods for measuring vacuum-pump performance Part 1: General description |
| ISO 16063-31:2009 | Methods for the calibration of vibration and shock transducers Part 31: Testing of transverse vibration sensitivity |
| IEC TS 62903:2018 | Ultrasonics - Measurements of electroacoustical parameters and acoustic output power of spherically curved transducers using the self-reciprocity method |
| I.S. EN 62586-2:2017 | POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS |
| DIN EN ISO 22476-7:2013-03 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 7: BOREHOLE JACK TEST (ISO 22476-7:2012) |
| ANSI S12-5 : 2006 : R2011 | ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS |
| CSA N288.4:2010 | ENVIRONMENTAL MONITORING PROGRAMS AT CLASS 1 NUCLEAR FACILITIES AND URANIUM MINES AND MILLS |
| IES RP 27.2 : 2000(R2017) | PHOTOBIOLOGICAL SAFETY FOR LAMPS AND LAMP SYSTEMS - MEASUREMENT SYSTEMS - MEASUREMENT TECHNIQUES |
| ISO 20906:2009 | Acoustics — Unattended monitoring of aircraft sound in the vicinity of airports |
| PREN 50413 : DRAFT 2018 | BASIC STANDARD ON MEASUREMENT AND CALCULATION PROCEDURES FOR HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| CSA N288.5 : 2011 | EFFLUENT MONITORING PROGRAMS AT CLASS 1 NUCLEAR FACILITIES AND URANIUM MINES AND MILLS |
| DIN EN ISO 5167-5:2016-10 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) |
| UNI CEI EN ISO 80000-1 : 2013 | QUANTITIES AND UNITS - PART 1: GENERAL |
| BS EN ISO 19918:2017 | Protective clothing. Protection against chemicals. Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017) |
| DIN EN ISO 25140:2010-12 | Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010) |
| DKD-R 3-5 : 2002 | KALIBRIERUNG VON DREHMOMENTMESSGERAETEN FUER STATISCHE WECHSELDREHMOMENTE |
| NF EN ISO 14253-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| DIN EN 16682:2016-01 (Draft) | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| UNE-EN 60060-2:2012 | High-voltage test techniques -- Part 2: Measuring systems. |
| CSA C61400-12-1 : 2007 : R2012 | WIND TURBINES - PART 12-1: POWER PERFORMANCE MEASUREMENTS OF ELECTRICITY PRODUCING WIND TURBINES |
| CEI EN 62359 : 2012 | ULTRASONICS - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS |
| BS ISO 19030-1:2016 | Ships and marine technology. Measurement of changes in hull and propeller performance General principles |
| IES LM 9 : 2009 | ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF FLUORESCENT LAMPS |
| CSA ISO/IEC 10373-7 : 2009 | IDENTIFICATION CARDS - TEST METHODS - PART 7: VICINITY CARDS |
| API HDVSF : 2007 | VORTEX SHEDDING FLOWMETER FOR MEASUREMENT OF HYDROCARBON FLUIDS |
| ISO 2469:2014 | Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor) |
| ANSI/ASA S12.53 PART 1 : 2011(R2016) | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
| DIN EN ISO 16610-71:2014-12 | Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) |
| S.R. CEN/TS 13649:2014 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - SORPTIVE SAMPLING METHOD FOLLOWED BY SOLVENT EXTRACTION OR THERMAL DESORPTION |
| 15/30267585 DC : 0 | BS EN 61400-12-1 ED.2 - WIND TURBINES - PART 12-1: POWER PERFORMANCE MEASUREMENTS OF ELECTRICITY PRODUCING WIND TURBINES |
| UNE-EN ISO 11665-3:2016 | Measurement of radioactivity in the environment - Air: radon-222 - Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products (ISO 11665-3:2012) |
| ISO 15900:2009 | Determination of particle size distribution Differential electrical mobility analysis for aerosol particles |
| ISO 12242:2012 | Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid |
| I.S. EN 61000-4-31:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-31: TESTING AND MEASUREMENT TECHNIQUES - AC MAINS PORTS BROADBAND CONDUCTED DISTURBANCE IMMUNITY TEST |
| I.S. EN ISO 11608-5:2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS (ISO 11608-5:2012) |
| I.S. EN ISO 1938-1:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015) |
| UNE-EN 1793-4:2015 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction |
| I.S. EN 62489-1:2010 | ELECTROACOUSTICS - AUDIO-FREQUENCY INDUCTION LOOP SYSTEMS FOR ASSISTED HEARING - PART 1: METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE OF SYSTEM COMPONENTS |
| BS EN 62040-3:2011 | Uninterruptible power systems (UPS) Method of specifying the performance and test requirements |
| IEC TR 62627-04:2012 | Fibre optic interconnecting devices and passive components - Part 04: Example of uncertainty calculation: Measurement of the attenuation of an optical connector |
| API RP 17S : 2015 | RECOMMENDED PRACTICE FOR THE DESIGN, TESTING, AND OPERATION OF SUBSEA MULTIPHASE FLOW METERS |
| ISO 2314:2009 | Gas turbines — Acceptance tests |
| ISO 27893:2011 | Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge |
| I.S. EN 62607-3-1:2014 | NANOMANUFACTURING - KEY CONTROL CHARACTERISTICS - PART 3-1: LUMINESCENT NANOMATERIALS - QUANTUM EFFICIENCY |
| UNI EN ISO 11771 : 2011 | AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
| UNE-EN ISO 13225:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| I.S. EN ISO 14253-1:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2017) |
| CAN/CSA-C22.2 NO. 62471:12 (R2017) | Photobiological safety of lamps and lamp systems (Adopted IEC 62471:2006, first edition, 2006-07, with Canadian deviations) | Sécurité photobiologique des lampes et des appareils utilisant des lampes (norme CEI 62471:2006 adoptée, première édition, 2006-07, avec exigences propres au Canada) |
| CEI EN 61788-8 : 2011 | SUPERCONDUCTIVITY - PART 8: AC LOSS MEASUREMENTS - TOTAL AC LOSS MEASUREMENT OF ROUND SUPERCONDUCTING WIRES EXPOSED TO A TRANSVERSE ALTERNATING MAGNETIC FIELD AT LIQUID HELIUM TEMPERATURE BY A PICKUP COIL METHOD |
| IEC 60601-2-8:2010+AMD1:2015 CSV | Medical electrical equipment - Part 2-8: Particular requirements forthe basic safety and essential performance of therapeutic X-ray equipment operating in the range 10 kV to 1 MV |
| SAE AS9138 | Aerospace Series - Quality Management Systems Statistical Product Acceptance Requirements |
| I.S. EN ISO 13161:2015 | WATER QUALITY - MEASUREMENT OF POLONIUM 210 ACTIVITY CONCENTRATION IN WATER BY ALPHA SPECTROMETRY (ISO 13161:2011) |
| I.S. EN 61788-13:2012 | SUPERCONDUCTIVITY - PART 13: AC LOSS MEASUREMENTS - MAGNETOMETER METHODS FOR HYSTERESIS LOSS IN SUPERCONDUCTING MULTIFILAMENTARY COMPOSITES (IEC 61788-13:2012 (EQV)) |
| PREN 45501 : DRAFT 2011 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| BS EN ISO 20785-1:2017 | Dosimetry for exposures to cosmic radiation in civilian aircraft Conceptual basis for measurements |
| I.S. EN 15979:2011 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION |
| NF EN ISO 15194 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| ISO 15530-3:2011 | Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards |
| UNE-EN ISO 25178-601:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| I.S. EN ISO 6892-1:2016 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| BS EN 55016-4-2 : 2011 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY |
| I.S. EN ISO 14253-3:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| I.S. EN ISO 19918:2017 | PROTECTIVE CLOTHING - PROTECTION AGAINST CHEMICALS - MEASUREMENT OF CUMULATIVE PERMEATION OF CHEMICALS WITH LOW VAPOUR PRESSURE THROUGH MATERIALS (ISO 19918:2017) |
| ISO 13164-2:2013 | Water quality — Radon-222 — Part 2: Test method using gamma-ray spectrometry |
| I.S. EN 62220-1-1:2015 | MEDICAL ELECTRICAL EQUIPMENT - CHARACTERISTICS OF DIGITAL X-RAY IMAGING DEVICES - PART 1-1: DETERMINATION OF THE DETECTIVE QUANTUM EFFICIENCY - DETECTORS USED IN RADIOGRAPHIC IMAGING |
| BS EN ISO 9696:2017 | Water quality. Gross alpha activity. Test method using thick source |
| I.S. EN ISO 21258:2010 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE (N[2]O) - REFERENCE METHOD: NON-DISPERSIVE INFRARED METHOD |
| DIN EN ISO 11819-2:2015-11 (Draft) | ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 2: THE CLOSE-PROXIMITY METHOD (ISO 11819-2:2017) |
| BS EN 62271-100 : 2009 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2008) |
| CEI EN 61315 : 2007 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
| I.S. EN ISO 19017:2017 | GUIDANCE FOR GAMMA SPECTROMETRY MEASUREMENT OF RADIOACTIVE WASTE (ISO 19017:2015) |
| BS ISO 11843-6:2013 | Capability of detection Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
| BS EN 50629 : 2015 | ENERGY PERFORMANCE OF LARGE POWER TRANSFORMERS (U[M] > 36 KV OR S[R] >= 40 MVA) |
| CEI UNI EN ISO 17034 : 1ED 2018 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| CEI EN 61672-3 : 2014 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS |
| I.S. EN ISO 16000-26:2012 | INDOOR AIR - PART 26: SAMPLING STRATEGY FOR CARBON DIOXIDE (CO[2]) (ISO 16000-26:2012) |
| UNI ISO 20906 : 2012 | ACOUSTICS - UNATTENDED MONITORING OF AIRCRAFT SOUND IN THE VICINITY OF AIRPORTS |
| UNI EN ISO 17201-3 : 2010 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 3: GUIDELINES FOR SOUND PROPAGATION CALCULATIONS |
| I.S. EN 61788-5:2013 | SUPERCONDUCTIVITY - PART 5: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO SUPERCONDUCTOR VOLUME RATIO OF CU/NB-TI COMPOSITE SUPERCONDUCTING WIRES (IEC 61788-5:2013 (EQV)) |
| ANSI/ASSE Z690 PACKAGE : 2011 | ANSI/ASSE Z690.1-2011 - VOCABULARY FOR RISK MANAGEMENT; ANSI/ASSE Z690.2-2011 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES; ANSI/ASSE Z690.3-2011 - RISK ASSESSMENT TECHNIQUES; ISO/ANSI/ASSE/TR-31004-2014 (Z690 TR-2014) RISK MANAGEMENT-GUIDANCE FOR THE IMPLEMENTATION OF ISO 31004 |
| ISO 29301:2017 | Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures |
| ISO 14064-1:2006 | Greenhouse gases Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals |
| UNI EN ISO 13385-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| OLF 044 : 2018 | RECOMMENDED GUIDELINES FOR EMISSION AND DISCHARGE REPORTING |
| UNI EN 16272-6 : 2014 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
| I.S. EN ISO 5167-5:2016 | MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 5: CONE METERS (ISO 5167-5:2016) |
| ISO 16063-16:2014 | Methods for the calibration of vibration and shock transducers — Part 16: Calibration by Earth's gravitation |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| DIN EN ISO 15530-3:2012-01 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011) |
| ISO 11554:2017 | Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics |
| ISO 23550:2011 | Safety and control devices for gas burners and gas-burning appliances General requirements |
| PREN 15991 : DRAFT 2014 | TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV) |
| I.S. EN ISO 4064-2:2017 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
| I.S. EN 16682:2017 | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| ISO 16063-17:2016 | Methods for the calibration of vibration and shock transducers Part 17: Primary calibration by centrifuge |
| I.S. EN ISO 148-1:2016 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
| I.S. EN 60318-4:2010 | ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 4: OCCLUDED-EAR SIMULATOR FOR THE MEASUREMENT OF EARPHONES COUPLED TO THE EAR BY MEANS OF EAR INSERTS |
| BS ISO 17034 : 2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| ISO 1996-2:2017 | Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels |
| UNE-EN 50379-2:2013 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment |
| ISO 18589-4:2009 | Measurement of radioactivity in the environment Soil Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry |
| ANSI/ASA S3.55 PART 5:2014 | Electroacoustics – Simulators of Human Head and Ear – Part 5: 2 cm3 Coupler for the Measurement of Hearing Aids and Earphones Coupled to the Ear by Means of Ear Inserts (a modified nationally adopted international standard) |
| ANSI S1.17-1 : 2014 | MICROPHONE WINDSCREENS - PART 1: TEST PROCEDURES FOR MEASUREMENTS OF INSERTION LOSS IN STILL AIR |
| EN ISO 29661:2017 | Reference radiation fields for radiation protection - Definitions and fundamental concepts (ISO 29661:2012, including Amd 1:2015) |
| ECA 10-02 : 2011 | CALIBRATION OF GAUGE BLOCK COMPARATORS |
| PREN 14789 : DRAFT 2014 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| UNI ISO 22514-1 : 2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS |
| I.S. EN ISO 25178-71:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 71: SOFTWARE MEASUREMENT STANDARDS (ISO 25178-1:2017) |
| I.S. EN 16603-10-09:2014 | SPACE ENGINEERING - REFERENCE COORDINATE SYSTEM |
| I.S. EN 61280-1-1:2013 | FIBRE OPTIC COMMUNICATION SUBSYSTEM BASIC TEST PROCEDURES - PART 1-1: TEST PROCEDURES FOR GENERAL COMMUNICATION SUBSYSTEMS - TRANSMITTER OUTPUT OPTICAL POWER MEASUREMENT FOR SINGLEMODE OPTICAL FIBRE CABLE (IEC 61280-1-1:2013 (EQV)) |
| CEI EN 61674 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING |
| ISO 2889:2010 | Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities |
| DIN EN ISO 14253-2:2011-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION (ISO 14253-2:2011) |
| 16/30348450 DC : 0 | BS EN 13819-3 - HEARING PROTECTORS - TESTING - PART 3: SUPPLEMENTARY ACOUSTIC TEST METHOD |
| I.S. EN 61788-8:2010 | SUPERCONDUCTIVITY - PART 8: AC LOSS MEASUREMENTS - TOTAL AC LOSS MEASUREMENT OF ROUND SUPERCONDUCTING WIRES EXPOSED TO A TRANSVERSE ALTERNATING MAGNETIC FIELD AT LIQUID HELIUM TEMPERATURE BY A PICKUP COIL METHOD |
| ISO 21438-2:2009 | Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) |
| 17/30359551 DC : 0 | BS EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
| 16/30346712 DC : 0 | BS EN 16002 - FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING |
| UNE-EN ISO 204:2010 | Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
| UNE-EN ISO 11704:2016 | Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method (ISO 11704:2010) |
| ANSI S3.55-1 : 2014 | ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 1: EAR SIMULATOR FOR THE MEASUREMENT OF SUPRA-AURAL AND CIRCUMAURAL EARPHONES |
| EN ISO 204:2009 | Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
| NF EN ISO 10704 : 2015 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD |
| EN ISO 15530-3:2011 | Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) |
| ANSI/ASA S12.42 : 2010 | METHODS FOR THE MEASUREMENT OF INSERTION LOSS OF HEARING PROTECTION DEVICES IN CONTINUOUS OR IMPULSIVE NOISE USING MICROPHONE-IN-REAL-EAR OR ACOUSTIC TEST FIXTURE PROCEDURES |
| EN ISO 10704:2015 | Water quality - Measurement of gross alpha and gross beta activity in non-saline water - Thin source deposit method (ISO 10704:2009) |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| BS ISO 19229:2015 | Gas analysis. Purity analysis and the treatment of purity data |
| ISO 4377:2012 | Hydrometric determinations — Flow measurement in open channels using structures — Flat-V weirs |
| UNI EN ISO 14253-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| ASTM D 6061 : 2001 : R2012 : EDT 1 | Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| CEI EN 61260-3 : 2017 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 3: PERIODIC TESTS |
| PREN ISO 13199 : DRAFT 2011 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOC) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED METHOD EQUIPPED WITH CATALYTIC CONVERTER |
| PREN ISO 20743 : DRAFT 2012 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS (ISO/DIS 20743:2012) |
| I.S. EN 61180:2016 | HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS, TEST EQUIPMENT |
| UNI EN ISO 20743 : 2013 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS |
| IEC TS 62462:2007 | Ultrasonics - Output Test - Guide for the maintenance of ultrasound physiotherapy systems |
| I.S. EN 50379-2:2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN STATUTORY INSPECTIONS AND ASSESSMENT |
| ANSI/ASA S1.4 PART 3:2014 | Electroacoustics - Sound Level Meters - Part 3: Periodic Tests (a nationally adopted international standard) |
| ASTM D 7902 : 2018 : REDLINE | Standard Terminology for Radiochemical Analyses |
| IES LM 85 : 2014 | APPROVED METHOD: ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF HIGH-POWER LEDS |
| UNE-EN ISO 3611:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
| I.S. EN ISO 22007-6:2015 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
| BS EN 61400-11 : 2013 | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| ASTM E 3047 : 2016 | Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry |
| ISO 12154:2014 | Determination of density by volumetric displacement — Skeleton density by gas pycnometry |
| ISO 13165-1:2013 | Water quality — Radium-226 — Part 1: Test method using liquid scintillation counting |
| UNE-EN 1793-5:2016 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions |
| EN ISO 25178-71:2017 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) |
| EN ISO 14064-1:2012 | Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006) |
| ISO/TR 17243-1:2014 | Machine tool spindles Evaluation of machine tool spindle vibrations by measurements on spindle housing Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1 |
| ISO 29903:2012 | Guidance for comparison of toxic gas data between different physical fire models and scales |
| ISO 17733:2015 | Workplace air Determination of mercury and inorganic mercury compounds Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| ISO 11382:2010 | Optics and photonics — Optical materials and components — Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm |
| ISO 19017:2015 | Guidance for gamma spectrometry measurement of radioactive waste |
| ISO 230-2:2014 | Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes |
| ISO 11843-6:2013 | Capability of detection Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
| ISO 28057:2014 | Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy |
| ISO 16331-1:2017 | Optics and optical instruments — Laboratory procedures for testing surveying and construction instruments — Part 1: Performance of handheld laser distance meters |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| ISO 15769:2010 | Hydrometry Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods |
| EN ISO 17201-3:2010 | Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations (ISO 17201-3:2010) |
| ISO 17735:2009 | Workplace atmospheres Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography |
| ISO 20785-2:2011 | Dosimetry for exposures to cosmic radiation in civilian aircraft Part 2: Characterization of instrument response |
| ISO/ASTM 52701:2013 | Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing |
| ISO 17089-2:2012 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications |
| ISO/IEC 18046-2:2011 | Information technology Radio frequency identification device performance test methods Part 2: Test methods for interrogator performance |
| DIN EN 1267:2012-04 | Industrial valves - Test of flow resistance using water as test fluid |
| IEC 61577-3:2011 | Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments |
| IEC TS 60076-19:2013 | Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors |
| ISO 16840-2:2018 | Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity |
| NF EN ISO 11202 : 2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS |
| ISO 4360:2008 | Hydrometry Open channel flow measurement using triangular profile weirs |
| IEC TR 62905:2018 | Exposure assessment methods for wireless power transfer systems |
| IWA 15:2015 | Specification and method for the determination of performance of automated liquid handling systems |
| IEC 61094-5:2016 | Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison |
| IEC TS 62282-7-1:2017 | Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC) |
| IEC 60068-3-6:2018 | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
| UNE-EN ISO 16859-1:2016 | Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015) |
| ISO 10302-2:2011 | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements |
| ISO/TR 12134:2010 | Rubber — Estimation of uncertainty for test methods — Non-functional parameters |
| I.S. EN 60060-1:2010 | HIGH-VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| I.S. EN ISO 14253-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| IEC 61094-3:2016 | Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique |
| ISO 4545-1:2017 | Metallic materials — Knoop hardness test — Part 1: Test method |
| CISPR TR 16-4-1:2009 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests |
| I.S. EN 61000-4-20:2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES |
| I.S. EN 62209-2:2010 | HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ) |
| I.S. EN 71-1:2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| I.S. EN 60601-2-8:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-8: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF THERAPEUTIC XRAY EQUIPMENT OPERATING IN THE RANGE 10 KV TO 1 MV |
| I.S. EN 61746-2:2011 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
| I.S. EN ISO 6506-2:2014 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| I.S. EN 60731:2012 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY (IEC 60731:2011 (EQV)) |
| I.S. EN ISO 25140:2010 | STATIONARY SOURCE EMISSIONS - AUTOMATIC METHOD FOR THE DETERMINATION OF THE METHANE CONCENTRATION USING FLAME IONISATION DETECTION (FID) |
| ISO 15767:2009 | Workplace atmospheres — Controlling and characterizing uncertainty in weighing collected aerosols |
| I.S. EN 50379-1:2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| EN 61746-1:2011/AC:2014 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES (IEC 61746-1:2009) |
| EN ISO 6141:2015 | Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015) |
| UNE-EN 60645-1:2015 | Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone audiometry |
| EN 61400-12-2:2013/AC:2016-10 | WIND TURBINES - PART 12-2: POWER PERFORMANCE OF ELECTRICITYPRODUCING WIND TURBINES BASED ON NACELLE ANEMOMETRY (IEC 61400-12-2:2013/COR1:2016) |
| EN 60601-2-8:2015/A1:2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-8: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF THERAPEUTIC X-RAY EQUIPMENT OPERATING IN THE RANGE 10 KV TO 1 MV (IEC 60601-2-8:2010/A1:2015) |
| EN 62751-2:2014 | Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters |
| EN 61746-2:2011/AC:2014 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
| EN 61260-2:2016/A1:2017 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS (IEC 61260-2:2016/A1:2017) |
| EN ISO 11200:2014 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
| EN ISO 11665-5:2015 | Measurement of radioactivity in the environment -Air: radon-222 - Part 5: Continuous measurement method of the activity concentration (ISO 11665-5:2012) |
| I.S. EN ISO 11200:2014 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012) |
| DIN EN ISO 15011-2:2010-03 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO<(Index)2>), nitrogen monoxide (NO) and nitrogen dioxide (NO<(Index)2>) during arc welding, cutting and gouging (ISO 15011-2:2009) |
| IEC 60645-1:2017 RLV | Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry |
| DIN EN 13804:2013-06 | Foodstuffs - Determination of elements and their chemical species - General considerations and specific requirements |
| ISO 6107-2:2006 | Water quality Vocabulary Part 2: |
| ISO 389-9:2009 | Acoustics Reference zero for the calibration of audiometric equipment Part 9: Preferred test conditions for the determination of reference hearing threshold levels |
| BS EN ISO 8311:2013 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Calibration of membrane tanks and independent prismatic tanks in ships. Manual and internal electro-optical distance-ranging methods |
| I.S. EN ISO 6141:2015 | GAS ANALYSIS - CONTENTS OF CERTIFICATES FOR CALIBRATION GAS MIXTURES (ISO 6141:2015) |
| ISO 10846-5:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
| UNE-EN ISO 6892-1:2017 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| IEC 61260-3:2016 | Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests |
| IEC 61577-2:2014 | Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for <sup>222</sup>Rn and <sup>220</sup>Rn measuring instruments |
| ISO 16610-1:2015 | Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts |
| UNE-EN 1793-1:2017 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions |
| ISO 16610-21:2011 | Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters |
| IEC 61788-13:2012 | Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites |
| IEC 61788-4:2016 | Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb<sub>3</sub>Sn composite superconductors |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| ISO 17201-5:2010 | Acoustics Noise from shooting ranges Part 5: Noise management |
| ISO 5436-2:2012 | Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards |
| ISO 10882-1:2011 | Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles |
| IEC 60118-0:2015 | Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids |
| UNE-EN 60118-0:2016 | Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
| ISO 8311:2013 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Calibration of membrane tanks and independent prismatic tanks in ships — Manual and internal electro-optical distance-ranging methods |
| BS EN ISO 15011-2:2009 | Health and safety in welding and allied processes. Laboratory method for sampling fume and gases Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging |
| BS EN ISO 772:2011 | Hydrometry. Vocabulary and symbols |
| IEC 61377:2016 | Railway applications - Rolling stock - Combined test method for traction systems |
| IEC 61400-11:2012 | Wind turbines - Part 11: Acoustic noise measurement techniques |
| ISO 18589-7:2013 | Measurement of radioactivity in the environment — Soil — Part 7: In situ measurement of gamma-emitting radionuclides |
| ISO 9614-3:2002 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ISO/TS 16491:2012 | Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests |
| ISO 14253-5:2015 | Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 5: Uncertainty in verification testing of indicating measuring instruments |
| ISO 16000-26:2012 | Indoor air — Part 26: Sampling strategy for carbon dioxide (CO2) |
| BS EN ISO 6974-2:2012 | Natural gas. Determination of composition and associated uncertainty by gas chromatography Uncertainty calculations |
| ISO 25140:2010 | Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionisation detection (FID) |
| ISO 6142-1:2015 | Gas analysis Preparation of calibration gas mixtures Part 1: Gravimetric method for Class I mixtures |
| ISO 10360-10:2016 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 10: Laser trackers for measuring point-to-point distances |
| BS EN ISO 6926:2016 | Acoustics. Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
| IEC 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
| ISO 9493:2010 | Geometrical product specifications (GPS) Dimensional measuring equipment: Dial test indicators (lever type) Design and metrological characteristics |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| BS EN 14789:2017 | Stationary source emissions. Determination of volume concentration of oxygen. Standard reference method: Paramagnetism |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 19739:2004 | Natural gas — Determination of sulfur compounds using gas chromatography |
| IEC TR 62461:2015 | Radiation protection instrumentation - Determination of uncertainty in measurement |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| UNE-EN ISO 14577-3:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015) |
| IEC 62127-1:2007+AMD1:2013 CSV | Ultrasonics - Hydrophones - Part 1: Measurement and characterizationof medical ultrasonic fields up to 40 MHz |
| UNE-EN 1776:2017 | Gas infrastructure - Gas measuring systems - Functional requirements |
| EN 61788-4:2016 | Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors |
| UNE-EN 13804:2013 | Foodstuffs - Determination of elements and their chemical species - General considerations and specific requirements |
| BS EN ISO 10846-1:2008 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Principles and guidelines |
| UNE-EN 60456:2016 | Clothes washing machines for household use - Methods for measuring the performance |
| UNE-EN ISO 13161:2016 | Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011) |
| BS EN 1776:2015 | Gas infrastructure. Gas measuring systems. Functional requirements |
| ISO 6145-5:2009 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 5: Capillary calibration devices |
| UNI EN ISO 11200 : 2014 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS |
| ISO 25378:2011 | Geometrical product specifications (GPS) Characteristics and conditions Definitions |
| IEC 61746-1:2009 | Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single mode fibres |
| ISO 16610-30:2015 | Geometrical product specifications (GPS) Filtration Part 30: Robust profile filters: Basic concepts |
| ISO 4064-2:2014 | Water meters for cold potable water and hot water — Part 2: Test methods |
| UNE-EN 14792:2017 | Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence |
| UNE-EN 61000-4-20:2011 | Electromagnetic compatibility (EMC) -- Part 4-20: Testing and measurement techniques - Emission and immunity testing in Transverse Electromagnetic (TEM) waveguides - Basic EMC publication |
| IEC 62040-5-3:2016 | Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements |
| ISO 17450-2:2012 | Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
| ISO 11200:2014 | Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| ISO 12999-1:2014 | Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation |
| IEC 60318-4:2010 | Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts |
| UNE-EN ISO 11665-7:2016 | Measurement of radioactivity in the environment - Air: radon-222 - Part 7: Accumulation method for estimating surface exhalation rate (ISO 11665-7:2012) |
| BS EN 482 : 2012 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| UNE-EN ISO 10723:2013 | Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
| BS EN ISO 6141:2015 | Gas analysis. Contents of certificates for calibration gas mixtures |
| BS EN 14662-3:2015 | Ambient air. Standard method for the measurement of benzene concentrations Automated pumped sampling with in situ gas chromatography |
| IEC 61788-11:2011 | Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors |
| ISO/TS 7849-1:2009 | Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 1: Survey method using a fixed radiation factor |
| UNE-EN ISO 14577-1:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015) |
| ISO 14577-4:2016 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 4: Test method for metallic and non-metallic coatings |
| ISO 14253-3:2011 | Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
| ISO 16911-1:2013 | Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 1: Manual reference method |
| BS EN 12470-4 : 2001 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| UNE-EN 482:2012 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| ISO 15011-2:2009 | Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging |
| IEC 60154-2:2016 | Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides |
| UNE-EN ISO 772:2012 | Hydrometry - Vocabulary and symbols (ISO 772:2011) |
| ISO 10846-4:2003 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
| IEC 62585:2012 | Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter |
| ISO 22674:2016 | Dentistry — Metallic materials for fixed and removable restorations and appliances |
| UNE-EN 61966-5:2010 | Multimedia systems and equipment - Colour measurement and management -- Part 5: Equipment using plasma display panels |
| IEC 60601-2-62:2013 | Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
| ISO 15011-1:2009 | Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis |
| UNE-EN ISO 3744:2011 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 16859-2:2015 | Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices |
| UNE-EN 50380:2003 | Datasheet and nameplate information for photovoltaic modules |
| ISO 1938-1:2015 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size |
| ISO 15011-3:2009 | Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 3: Determination of ozone emission rate during arc welding |
| ISO 10723:2012 | Natural gas — Performance evaluation for analytical systems |
| IEC 61788-12:2013 | Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb<sub>3</sub>Sn composite superconducting wires |
| ISO 8253-1:2010 | Acoustics Audiometric test methods Part 1: Pure-tone air and bone conduction audiometry |
| UNE-EN ISO 16911-1:2013 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013) |
| ISO 16610-22:2015 | Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters |
| BS EN ISO 463:2006 | Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges |
| ISO 3611:2010 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics |
| IEC 62607-3-1:2014 | Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency |
| ISO 15193:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures |
| IEC 61094-8:2012 | Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison |
| ISO 13385-1:2011 | Geometrical product specifications (GPS) Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics |
| ISO 22007-6:2014 | Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique |
| IEC 62129-1:2016 | Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers |
| ISO 21258:2010 | Stationary source emissions — Determination of the mass concentration of dinitrogen monoxide (N2O) — Reference method: Non-dispersive infrared method |
| ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters |
| BS EN ISO 17249:2013 | Safety footwear with resistance to chain saw cutting |
| ISO 14720-2:2013 | Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow |
| IEC 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| ISO 10846-1:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines |
| IEC 61083-2:2013 | Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents |
| ISO 13102:2012 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digital-indicator gauge — Design and metrological characteristics |
| ISO 25139:2011 | Stationary source emissions — Manual method for the determination of the methane concentration using gas chromatography |
| IEC 60318-3:2014 | Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry |
| ISO 22007-3:2008 | Plastics Determination of thermal conductivity and thermal diffusivity Part 3: Temperature wave analysis method |
| ISO 11771:2010 | Air quality Determination of time-averaged mass emissions and emission factors General approach |
| IEC 62475:2010 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
| IEC 61207-1:2010 | Expression of performance of gas analyzers - Part 1: General |
| IEC 60404-15:2012+AMD1:2016 CSV | Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials |
| IEC 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
| ISO 11819-2:2017 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The close-proximity method |
| ISO 8015:2011 | Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules |
| ISO 13162:2011 | Water quality Determination of carbon 14 activity Liquid scintillation counting method |
| UNE-EN 16242:2014 | Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
| ISO 27971:2015 | Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology |
| ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
| ISO 772:1996 | Hydrometric determinations — Vocabulary and symbols |
| ISO 6974-2:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations |
| ISO 13160:2012 | Water quality Strontium 90 and strontium 89 Test methods using liquid scintillation counting or proportional counting |
| UNE-EN ISO 13385-1:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011) |
| UNE-EN ISO 3095:2014 | Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013) |
| UNE-EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
| IEC 62751-2:2014 | Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters |
| ISO 13199:2012 | Stationary source emissions Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes Non-dispersive infrared analyser equipped with catalytic converter |
| ISO/TS 17892-6:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test |
| BS EN ISO 3746:2009 | Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane |
| BS EN ISO 6974-1:2012 | Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition |
| IEC 61000-4-22:2010 | Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emissions and immunity measurements in fully anechoic rooms (FARs) |
| ISO 11608-1:2014 | Needle-based injection systems for medical use Requirements and test methods Part 1: Needle-based injection systems |
| ISO 14577-1:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method |
| BS EN ISO 3743-1:2009 | Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fields Comparison method for hard-walled test rooms |
| ISO 14577-3:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks |
| IEC 61280-4-2:2014 | Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
| ISO 15212-2:2002 | Oscillation-type density meters Part 2: Process instruments for homogeneous liquids |
| ISO 13385-2:2011 | Geometrical product specifications (GPS) Dimensional measuring equipment Part 2: Calliper depth gauges; Design and metrological characteristics |
| IEC 61788-16:2013 | Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies |
| ISO 16610-85:2013 | Geometrical product specifications (GPS) — Filtration — Part 85: Morphological areal filters: Segmentation |
| IEC 61786-1:2013 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
| UNE-EN ISO 3743-1:2011 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| ISO 11665-7:2012 | Measurement of radioactivity in the environment — Air: radon-222 — Part 7: Accumulation method for estimating surface exhalation rate |
| IEC 61674:2012 | Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| ISO 4373:2008 | Hydrometry Water level measuring devices |
| DIN EN ISO 6974-5:2014-10 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 5: ISOTHERMAL METHOD FOR NITROGEN, CARBON DIOXIDE, C[1] TO C[5] HYDROCARBONS AND C[6+] HYDROCARBONS (ISO 6974-5:2014) |
| UNE-EN 14790:2017 | Stationary source emissions - Determination of the water vapour in ducts - Standard reference method |
| ISO 10523:2008 | Water quality — Determination of pH |
| BS EN ISO 3650:1999 | Geometrical product specifications (GPS). Length standards. Gauge blocks |
| UNE-EN ISO 6141:2015 | Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015) |
| BS EN ISO 3747:2010 | Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment |
| DIN EN 15058:2006-09 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
| IEC TS 62492-2:2013 | Industrial process control devices - Radiation thermometers - Part 2: Determination of the technical data for radiation thermometers |
| BS EN ISO 11204:2010 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| IEC 62555:2013 | Ultrasonics - Power measurement - High intensity therapeutic ultrasound (HITU) transducers and systems |
| ISO 13473-5:2009 | Characterization of pavement texture by use of surface profiles — Part 5: Determination of megatexture |
| BS EN ISO 10723:2012 | Natural gas. Performance evaluation for analytical systems |
| BS EN ISO 11200:2014 | Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| BS EN 13201-4:2015 | Road lighting Methods of measuring lighting performance |
| IEC 62129-2:2011 | Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters |
| BS EN ISO 14577-3:2015 | Metallic materials. Instrumented indentation test for hardness and materials parameters Calibration of reference blocks |
| ISO 22476-5:2012 | Geotechnical investigation and testing — Field testing — Part 5: Flexible dilatometer test |
| ISO/TS 20656-1:2017 | Plastics piping systems — General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes — Part 1: Buried pipes |
| BS EN 14790:2005 | Stationary source emissions. Determination of the water vapour in ducts |
| UNE-EN 13032-4:2016 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires |
| UNE-EN 60318-1:2010 | Electroacoustics - Simulators of human head and ear -- Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones |
| IEC 62810:2015 | Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods |
| UNE-EN ISO 9513:2013 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012, Corrected version 2015-06) |
| ISO 6145-6:2017 | Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 6: Critical flow orifices |
| ISO 4074:2015 | Natural rubber latex male condoms Requirements and test methods |
| ISO 8041-1:2017 | Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters |
| UNE-EN ISO 3741:2011 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
| ISO 20743:2013 | Textiles Determination of antibacterial activity of textile products |
| ISO 25178-602:2010 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments |
| IEC 61260-2:2016+AMD1:2017 CSV | Electroacoustics - Octave-band and fractional-octave band filters - Part 2: Pattern evaluation tests |
| ISO 17034:2016 | General requirements for the competence of reference material producers |
| UNE-EN ISO 2178:2017 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| ISO 6974-5:2014 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons |
| IEC 61757-1:2012 | Fibre optic sensors - Part 1: Generic specification |
| UNE-EN ISO 14577-4:2017 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016) |
| ISO 8253-3:2012 | Acoustics Audiometric test methods Part 3: Speech audiometry |
| UNE-EN 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
| ISO 16610-71:2014 | Geometrical product specifications (GPS) — Filtration — Part 71: Robust areal filters: Gaussian regression filters |
| BS EN ISO 15011-3:2009 | Health and safety in welding and allied processes. Laboratory method for sampling fume and gases Determination of ozone emission rate during arc welding |
| ISO 16859-3:2015 | Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks |
| UNE-EN 62489-1:2011 | Electroacoustics - Audio-frequency induction loop systems for assisted hearing -- Part 1: Methods of measuring and specifying the performance of system components |
| BS EN ISO 14577-1:2015 | Metallic materials. Instrumented indentation test for hardness and materials parameters Test method |
| IEC 61157:2007+AMD1:2013 CSV | Standard means for the reporting of the acoustic output of medicaldiagnostic ultrasonic equipment |
| BS EN ISO 6506-1:2014 | Metallic materials. Brinell hardness test Test method |
| IEC 61788-6:2011 | Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors |
| UNE-EN 13201-4:2016 | Road lighting - Part 4: Methods of measuring lighting performance |
| ISO 16859-1:2015 | Metallic materials — Leeb hardness test — Part 1: Test method |
| ISO 748:2007 | Hydrometry Measurement of liquid flow in open channels using current-meters or floats |
| UNE-EN ISO 22475-1:2010 | Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006) |
| IEC 61400-13:2015 | Wind turbines - Part 13: Measurement of mechanical loads |
| ISO 14577-2:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines |
| DIN EN 14791:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
| EN 61577-3:2014 | Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments |
| DIN EN ISO 14577-4:2017-04 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016) |
| DIN EN ISO 4373:2009-01 | Hydrometry - Water level measuring devices (ISO 4373:2008) |
| EN 61526:2013 | Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters |
| DIN EN ISO/IEC 17043:2010-05 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN ISO 748:2007 | Hydrometry - Measurement of liquid flow in open channels using current-meters or floats (ISO 748:2007) |
| EN 16211:2015 | Ventilation for buildings - Measurement of air flows on site - Methods |
| EN ISO 16610-1:2015 | Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015) |
| EN ISO 11665-1:2015 | Measurement of radioactivity in the environment - Air: radon-222 - Part 1: Origins of radon and its short-lived decay products and associated measurement methods (ISO 11665-1:2012) |
| EN ISO 5436-2:2012 | Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) |
| EN ISO 11665-7:2015 | Measurement of radioactivity in the environment - Air: radon-222 - Part 7: Accumulation method for estimating surface exhalation rate (ISO 11665-7:2012) |
| EN 16866:2017 | Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
| EN ISO 13199:2012 | Stationary source emissions - Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes - Non-dispersive infrared analyser equipped with catalytic converter (ISO 13199:2012) |
| EN ISO 10846-1:2008 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008) |
| EN ISO 10012:2003 | Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| EN 14154-2:2005+A2:2011 | Water meters - Part 2: Installation and conditions of use |
| EN 14790:2017 | Stationary source emissions - Determination of the water vapour in ducts - Standard reference method |
| EN ISO 25140:2010 | Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010) |
| EN 14789:2017 | Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism |
| EN 16272-4:2016 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field |
| EN ISO 14720-1:2013 | Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods (ISO 14720-1:2013) |
| EN ISO 22007-3:2012 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008) |
| EN ISO 16641:2016 | Measurement of radioactivity in the environment - Air - Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors (ISO 16641:2014) |
| EN ISO 6789-2:2017 | Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017) |
| EN ISO 22674:2016 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
| EN ISO 21649:2009 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN ISO 8311:2013 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - Calibration of membrane tanks and independent prismatic tanks in ships - Manual and internal electro-optical distance-ranging methods (ISO 8311:2013) |
| EN ISO 10846-4:2003 | Acoustics and vibration - Laboratory measurement of vibro-acyustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003) |
| EN ISO 4064-2:2017 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
| EN ISO/TS 17892-6 : 2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 6: FALL CONE TEST |
| EN ISO 14577-2:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015) |
| EN ISO 22007-6:2015 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014) |
| EN ISO 14720-2:2013 | Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow (ISO 14720-2:2013) |
| EN 19694-3:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry |
| EN ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) |
| EN ISO 16859-2:2015 | Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015) |
| EN ISO 27971:2015 | Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015) |
| EN ISO 9612:2009 | Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009) |
| EN 13804:2013 | Foodstuffs - Determination of elements and their chemical species - General considerations and specific requirements |
| EN ISO 15193:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009) |
| EN ISO 11665-2:2015 | Measurement of radioactivity in the environment - Air: radon-222 - Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products (ISO 11665-2:2012) |
| EN ISO 15971:2014 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| EN ISO 4373:2008 | Hydrometry - Water level measuring devices (ISO 4373:2008) |
| EN ISO 21258:2010 | Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010) |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| EN 15058:2017 | Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry |
| EN ISO 6974-5:2014 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014) |
| EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| EN ISO 10723:2012 | Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
| EN 15852:2010 | Ambient air quality - Standard method for the determination of total gaseous mercury |
| EN 16682:2017 | Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| EN ISO 16610-30:2017 | Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015) |
| EN ISO 16610-85:2013 | Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013) |
| EN ISO 14253-5:2015 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) |
| EN 16272-6:2014 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions |
| EN ISO 25178-602:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| EN ISO 22476-5:2012 | Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012) |
| EN 15841:2009 | Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition |
| EN ISO 6142-1:2015 | Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015) |
| EN ISO 10846-5:2009 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008) |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 10882-1:2011 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| EN ISO 16638-1:2017 | Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015) |
| EN ISO 11554:2017 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) |
| EN ISO 12311 : 2013 COR 2014 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15) |
| EN 19694-1:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects |
| EN ISO 13473-5:2009 | Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009) |
| EN ISO 11608-5:2012 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
| EN 14791:2017 | Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method |
| EN ISO 17034:2016 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| EN 15980:2011 | Air quality - Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene |
| EN ISO 18589-7:2016 | Measurement of radioactivity in the environment - Soil - Part 7: In situ measurement of gamma-emitting radionuclides (ISO 18589-7:2013) |
| EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN ISO 10846-2:2008 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008) |
| EN 1811:2011+A1:2015 | Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin |
| EN ISO 13385-1:2011 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011) |
| EN ISO 9493:2010 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010) |
| EN ISO 3650:1998 | Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998) |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| EN ISO 8015:2011 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| EN 15267-4:2017 | Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| EN ISO 9614-3:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| EN ISO 16610-21:2012 | Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011) |
| EN 15842:2010 | Foodstuffs - Detection of food allergens - General considerations and validation of methods |
| EN ISO 3095:2013 | Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013) |
| EN 19694-6:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Ferroalloy industry |
| EN ISO 16911-1:2013 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013) |
| EN ISO 25139:2011 | Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011) |
| EN ISO 22476-7:2012 | Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test (ISO 22476-7:2012) |
| EN ISO 25378:2011 | Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) |
| EN ISO 9295:2015 | Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015) |
| EN 14154-3:2005+A2:2011 | Water meters - Part 3: Test methods and equipment |
| EN ISO 11819-2:2017 | Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method (ISO 11819-2:2017) |
| EN ISO 25178-70:2014 | Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) |
| EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
| EN ISO 17201-5:2010 | Acoustics - Noise from shooting ranges - Part 5: Noise management (ISO 17201-5:2010) |
| EN ISO 16610-22:2015 | Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015) |
| EN ISO 14577-3:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015) |
| EN ISO 14577-4:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016) |
| EN ISO 389-9:2009 | Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009) |
| EN 12470-4:2000+A1:2009 | Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement |
| EN 16012:2012+A1:2015 | Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance |
| EN ISO 6145-6:2017 | Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017) |
| EN ISO 8041-1:2017 | Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017) |
| EN ISO 14577-1:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015) |
| EN ISO 15194:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009) |
| EN ISO 3611:2010 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
| EN ISO 13225:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| EN 13771-2:2017 | Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units |
| EN ISO 25178-601:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| EN ISO 15011-3:2009 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009) |
| EN ISO 13138:2012 | Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012) |
| EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| EN ISO 16859-1:2015 | Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015) |
| EN ISO 11771:2010 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| EN 16603-10-09:2014 | Space engineering - Reference coordinate system |
| EN 16909:2017 | Ambient air - Measurement of elemental carbon (EC) and organic carbon (OC) collected on filters |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN ISO 16664:2017 | Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017) |
| EN ISO 17450-2:2012 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| EN 19694-2:2016 | Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2: Iron and steel industry |
| EN ISO 1938-1:2015 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| EN 15979:2011 | Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation |
| EN ISO 10523:2012 | Water quality - Determination of pH (ISO 10523:2008) |
| EN ISO 3747:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
| EN ISO 15011-2:2009 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging (ISO 15011-2:2009) |
| UNI EN ISO 8253-3 : 2012 | ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY |
| EN ISO 1938-2:2017 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017) |
| UNI EN ISO 772 : 2011 | HYDROMETRY - VOCABULARY AND SYMBOLS |
| EN 14181:2014 | Stationary source emissions - Quality assurance of automated measuring systems |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| EN ISO 11205:2009 | Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
| EN 15991:2015 | Testing of ceramic and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV) |
| EN ISO 6145-5:2010 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009) |
| EN ISO 6789:2003 | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003) |
| EN ISO 1:2016 | Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2016) |
| EN ISO 16610-71:2014 | Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) |
| DIN EN 15979:2011-04 | Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation |
| UNE-EN ISO 17201-3:2010 | Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations (ISO 17201-3:2010) |
| BS ISO/IEC 18046-3:2012 | Information technology. Radio frequency identification device performance test methods Test methods for tag performance |
| BS EN ISO 13385-2:2011 | Geometrical product specifications (GPS). Dimensional measuring equipment Calliper depth gauges. Design and metrological characteristics |
| I.S. CEN ISO TS 21432:2005 | NON-DESTRUCTIVE TESTING - STANDARDS TEST METHOD FOR DETERMINING RESIDUAL STRESSES BY NEUTRON DIFFRACTION |
| UNE-EN ISO 14253-1:2015 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification (ISO 14253-1:2013) |
| I.S. EN ISO 80601-2-61:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
| ISO 80601-2-61:2017 | Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
| CSA Z24512 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
| ASTM E 3125 : 2017 | Standard Test Method for Evaluating the Point-to-Point Distance Measurement Performance of Spherical Coordinate 3D Imaging Systems in the Medium Range |
| 12/30245291 DC : 0 | BS ISO 16578 - MOLECULAR BIOMARKER ANALYSIS - GENERAL DEFINITIONS AND REQUIREMENTS FOR MICROARRAY DETECTION OF SPECIFIC NUCLEIC ACID SEQUENCES |
| BS EN 60846-1:2014 | Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Portable workplace and environmental meters and monitors |
| 13/30280934 DC : 0 | BS EN ISO 7500-1 - METALLIC MATERIALS - VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - VERIFICATION AND CALIBRATION OF THE FORCE-MEASURING SYSTEM |
| DIN EN ISO 1938-1:2016-03 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| UNE-EN ISO 11665-6:2016 | Measurement of radioactivity in the environment - Air: radon-222 - Part 6: Spot measurement method of the activity concentration (ISO 11665-6:2012) |
| UNE-EN 50564:2012 | Electrical and electronic household and office equipment - Measurement of low power consumption |
| UNE-EN ISO 13102:2013 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012) |
| UNE-EN ISO 13473-5:2010 | Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009) |
| UNE-EN 60904-4:2011 | Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability |
| DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
| BS EN ISO 22007-3:2012 | Plastics. Determination of thermal conductivity and thermal diffusivity Temperature wave analysis method |
| CEN ISO/TR 24094:2007 | Analysis of natural gas - Validation methods for gaseous reference materials (ISO/TR 24094:2006) |
| UNI EN ISO 22007-3 : 2012 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD |
| IEC 60154-4:2017 | Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides |
| I.S. EN 61788-17:2013 | SUPERCONDUCTIVITY - PART 17: ELECTRONIC CHARACTERISTIC MEASUREMENTS - LOCAL CRITICAL CURRENT DENSITY AND ITS DISTRIBUTION IN LARGE-AREA SUPERCONDUCTING FILMS (IEC 61788-17:2013 (EQV)) |
| 13/30241689 DC : 0 | BS ISO 16063-16 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 16: CALIBRATION BY EARTH'S GRAVITATION |
| 12/30251292 DC | BS ISO/ASTM 51261. Practice for calibration of routine dosimetry systems for radiation processing |
| UNE-EN 60060-1:2012 | High-voltage test techniques - Part 1: General definitions and test requirements |
| UNE-EN 55017:2012 | Methods of measurement of the suppression characteristics of passive EMC filtering devices |
| DIN EN ISO 3746:2011-03 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| UNE-EN 61000-4-22:2011 | Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emission and immunity measurements in fully anechoic rooms (FARs) |
| EN 62489-1:2010/A2:2018 | ELECTROACOUSTICS - AUDIO-FREQUENCY INDUCTION LOOP SYSTEMS FOR ASSISTED HEARING - PART 1: METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE OF SYSTEM COMPONENTS (IEC 62489-1:2010/A2:2017) |
| 12/30248593 DC : 0 | BS ISO 14577-2 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| BS EN ISO 10846-5:2009 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
| BS ISO 30011:2010 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry |
| BS ISO 230-2 : 2014 | TEST CODE FOR MACHINE TOOLS - PART 2: DETERMINATION OF ACCURACY AND REPEATABILITY OF POSITIONING OF NUMERICALLY CONTROLLED AXES |
| EN ISO 19017:2017 | Guidance for gamma spectrometry measurement of radioactive waste (ISO 19017:2015) |
| UNE-EN 62479:2011 | Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
| 15/30289803 DC : 0 | BS EN ISO 148-2 - METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 2: VERIFICATION OF TESTING MACHINES |
| 12/30247121 DC : 0 | BS ISO 13166-1 - WATER QUALITY - URANIUM ISOTOPES - PART 1: TEST METHOD USING ALPHA SPECTROMETRY |
| PD ISO/TS 11819-3:2017 | Acoustics. Measurement of the influence of road surfaces on traffic noise Reference tyres |
| BS EN ISO 17034:2016 | General requirements for the competence of reference material producers |
| BS ISO 11665-2 : 2012 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 2: INTEGRATED MEASUREMENT METHOD FOR DETERMINING AVERAGE POTENTIAL ALPHA ENERGY CONCENTRATION OF ITS SHORT-LIVED DECAY PRODUCTS |
| BS EN 61746-1:2011 | Calibration of optical time-domain reflectometers (OTDR) OTDR for single-mode fibres |
| 13/30274158 DC : 0 | BS ISO 13168 - WATER QUALITY - SIMULTANEOUS DETERMINATION OF TRITIUM AND CARBON 14 ACTIVITIES - TEST METHOD USING LIQUID SCINTILLATION COUNTING |
| I.S. EN ISO 22476-7:2012 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 7: BOREHOLE JACK TEST (ISO 22476-7:2012) |
| CEI EN 61260-1 : 2017 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS |
| PD CEN/TR 17078:2017 | Stationary source emissions. Guidance on the application of EN ISO 16911-1 |
| 12/30240135 DC : 0 | BS ISO 11200 - ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS |
| 16/30296413 DC : 0 | BS ISO 19463 - MICROBEAM ANALYSIS - ELECTRON PROBE MICROANALYSER (EPMA) - GUIDELINES FOR PERFORMING QUALITY ASSURANCE PROCEDURES |
| OIML G 1-101 : 2008 | EVALUATION OF MEASUREMENT DATA - SUPPLEMENT 1 TO THE "GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT" - PROPAGATION OF DISTRIBUTIONS USING A MONTE CARLO METHOD |
| 12/30272264 DC : 0 | BS ISO 20765-2 - NATURAL GAS - CALCULATION OF THERMODYNAMIC PROPERTIES - PART 2: SINGLE-PHASE PROPERTIES (GAS, LIQUID, AND DENSE FLUID) FOR EXTENDED RANGES OF APPLICATION |
| ISO 3095:2013 | Acoustics Railway applications Measurement of noise emitted by railbound vehicles |
| PD ISO/TR 14294:2011 | Workplace atmospheres. Measurement of dermal Exposure. Principles and methods |
| 17/30347908 DC : 0 | BS ISO 11929-2 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - PART 2: ADVANCED APPLICATIONS |
| DIN EN ISO 14253-3:2011-10 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
| BS EN ISO 16610-22:2015 | Geometrical product specifications (GPS). Filtration Linear profile filters: Spline filters |
| DIN EN 13032-4:2015-08 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
| UNE-EN ISO 11771:2011 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| DIN EN 1793-6:2013-04 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN-SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
| 10/30230478 DC : 0 | BS EN 55016-1-6 ED.1 - SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC-ANTENNA CALIBRATION |
| BS ISO 17091:2013 | Workplace air. Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide. Method by measurement of corresponding cations by suppressed ion chromatography |
| 17/30369272 DC : 0 | BS EN 4861 - AEROSPACE SERIES - METROLOGICAL ASSESSMENT PROCEDURE FOR KINEMATIC FIELDS MEASURED BY DIGITAL IMAGE CORRELATION |
| DIN EN ISO 16000-26:2012-11 | Indoor air - Part 26: Sampling strategy for carbon dioxide (CO<(Index)2>) (ISO 16000-26:2012); German version EN ISO 16000-26:2012 |
| ISO 13167:2015 | Water quality — Plutonium, americium, curium and neptunium — Test method using alpha spectrometry |
| I.S. EN ISO 16610-22:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015) |
| DIN EN ISO 25178-602:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| I.S. EN 61577-2:2017 | RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS (IEC 61577-2:2014, MODIFIED) |
| IEEE 1720-2012 | IEEE Recommended Practice for Near-Field Antenna Measurements |
| UNE-EN 71-1:2015 | Safety of toys - Part 1: Mechanical and physical properties |
| BS EN 61000-4-3 : 2006 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| DIN EN ISO 1938-2:2017-05 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| DIN EN ISO 10523:2012-04 | Water quality - Determination of pH (ISO 10523:2008) |
| 17/30322288 DC : 0 | BS ISO 17208-2 - UNDERWATER ACOUSTICS - QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF UNDERWATER NOISE FROM SHIPS - PART 2: DETERMINATION OF SOURCE LEVELS |
| I.S. EN 61577-3:2014 | RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 3: SPECIFIC REQUIREMENTS FOR RADON DECAY PRODUCT MEASURING INSTRUMENTS |
| BS EN ISO 11665-3:2015 | Measurement of radioactivity in the environment. Air: radon-222 Spot measurement method of the potential alpha energy concentration of its short-lived decay products |
| CEI EN 60404-15 : 2014 | MAGNETIC MATERIALS - PART 15: METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS |
| 12/30231426 DC : 0 | BS ISO 13165-1 - WATER QUALITY - RADIUM 226 - PART 1: TEST METHOD USING LIQUID SCINTILLATION COUNTING |
| VDE 0412-661 : 2018 COR 1 2018 | REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS (ISO 29661:2012, INCLUDING AMD 1:2015) |
| EN IEC 60942:2018 | Electroacoustics - Sound calibrators |
| 15/30316155 DC : 0 | BS ISO 16840-2 - WHEELCHAIR SEATING - PART 2: DETERMINATION OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF DEVICES INTENDED TO MANAGE TISSUE INTEGRITY - SEAT CUSHIONS |
| 12/30232957 DC : 0 | BS ISO 16554 - SHIPS AND MARINE TECHNOLOGY - MARINE ENVIRONMENT PROTECTION - MEASUREMENT AND REPORTING OF UNDERWATER SOUND RADIATED FROM MERCHANT SHIPS |
| I.S. EN 61788-19:2014 | SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS |
| 16/30336081 DC : 0 | BS EN ISO 16664 - GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES |
| BS EN ISO 12311:2013 | Personal protective equipment. Test methods for sunglasses and related eyewear |
| BS ISO 12242:2012 | Measurement of fluid flow in closed conduits. Ultrasonic transit-time meters for liquid |
| 12/30262692 DC : 0 | BS ISO 16610-61 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS - GAUSSIAN FILTERS |
| BS EN 60794-1-2:2017 | Optical fibre cables Generic specification. Basic optical cable test procedures. General guidance |
| 11/30213827 DC : 0 | BS EN ISO 10723 - NATURAL GAS - PERFORMANCE EVALUATION FOR ON-LINE ANALYTICAL SYSTEMS |
| BS ISO 12154:2014 | Determination of density by volumetric displacement. Skeleton density by gas pycnometry |
| BS EN 16012 : 2012 | THERMAL INSULATION FOR BUILDINGS - REFLECTIVE INSULATION PRODUCTS - DETERMINATION OF THE DECLARED THERMAL PERFORMANCE |
| BS ISO 7503-2:2016 | Measurement of radioactivity. Measurement and evaluation of surface contamination Test method using wipe-test samples |
| BS ISO 13165-3:2016 | Water quality. Radium-226 Test method using coprecipitation and gamma-spectrometry |
| 13/30264708 DC : 0 | BS EN ISO 9295 - ACOUSTICS - DETERMINATION OF HIGH-FREQUENCY SOUND POWER LEVELS EMITTED BY MACHINERY AND EQUIPMENT |
| UNI CEI ISO 80000-1 : 2010 | QUANTITIES AND UNITS - PART 1: GENERAL |
| BS EN ISO 17201-5:2010 | Acoustics. Noise from shooting ranges Noise management |
| BS EN ISO 19739:2005 | Natural gas. Determination of sulfur compounds using gas chromatography |
| BS ISO 532-2:2017 | Acoustics. Methods for calculating loudness Moore-Glasberg method |
| 14/30293538 DC : 0 | BS EN 14793 - STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH THE REFERENCE METHOD |
| PD ISO/TS 20460:2015 | Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
| BS ISO 12963:2017 | Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration |
| 12/30264191 DC : DRAFT MAY 2012 | BS EN 61094-3 - ELECTRO ACOUSTICS - MEASUREMENT MICROPHONES - PART 3: PRIMARY METHOD FOR FREE FIELD CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE |
| ANSI/ASA S3.36:2012(R2018) | SPECIFICATION FOR A MANIKIN FOR SIMULATED IN-SITU AIRBORNE ACOUSTIC MEASUREMENTS |
| 11/30216799 DC : 0 | BS ISO 532-1 - ACOUSTICS - METHOD FOR CALCULATING LOUDNESS - PART 1: STATIONARY SOUNDS |
| ASTM D 6061 : 2001 : R2007 : EDT 1 | Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| DKD-R 5-6 : 2008 | |
| BS EN 62489-1 : 2010 | ELECTROACOUSTICS - AUDIO-FREQUENCY INDUCTION LOOP SYSTEMS FOR ASSISTED HEARING - PART 1: METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE OF SYSTEM COMPONENTS |
| 09/30208590 DC : 0 | BS EN 61672-2 ED.2 - ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| DIN EN ISO 9295:2015-09 | ACOUSTICS - DETERMINATION OF HIGH-FREQUENCY SOUND POWER LEVELS EMITTED BY MACHINERY AND EQUIPMENT (ISO 9295:2015) |
| BS EN 55017:2011 | Methods of measurement of the suppression characteristics of passive EMC filtering devices |
| DIN EN ISO 18113-1:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| BS EN ISO 148-2:2016 | Metallic materials. Charpy pendulum impact test Verification of testing machines |
| 15/30284304 DC : 0 | BS ISO 15042 - MULTIPLE SPLIT-SYSTEM AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| BS EN 62585:2012 | Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter |
| BS ISO 16840-6:2015 | Wheelchair seating Simulated use and determination of the changes in properties of seat cushions |
| PD ISO/PAS 17208-1:2012 | Acoustics. Quantities and procedures for description and measurement of underwater sound from ships General requirements for measurements in deep water |
| I.S. EN 12102-1:2017 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS, PROCESS CHILLERS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 1: AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS FOR SPACE HEATING AND COOLING, DEHUMIDIFIERS AND PROCESS CHILLERS |
| 11/30231340 DC : 0 | BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE |
| 18/30327040 DC : 0 | BS ISO 20042 - MEASUREMENT OF RADIOACTIVITY - GAMMA EMITTING RADIONUCLIDES - GENERIC TEST METHOD USING GAMMA SPECTROMETRY |
| BS EN 61746-2:2011 | Calibration of optical time-domain reflectometers (OTDR) OTDR for multimode fibres |
| UNE-EN 61180:2017 | High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment |
| BS ISO/IEC 18046-1:2011 | Information technology. Radio frequency identification device performance test methods Test methods for system performance |
| BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
| ECA 10-06 : 2011 | EXTENT OF CALIBRATION FOR CYLINDRICAL DIAMETER STANDARDS |
| CEI EN 60154-2 : 2ED 2017 | FLANGES FOR WAVEGUIDES - PART 2: RELEVANT SPECIFICATIONS FOR FLANGES FOR ORDINARY RECTANGULAR WAVEGUIDES |
| BS EN ISO 3095:2013 | Acoustics. Railway applications. Measurement of noise emitted byrailbound vehicles |
| 17/30289056 DC : 0 | BS ISO 16063-33 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 33: TESTING OF MAGNETIC FIELD SENSITIVITY |
| I.S. EN 16913:2017 | AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS |
| PREN 1793-1 : DRAFT 2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| BS EN ISO 16610-1:2015 | Geometrical product specifications (GPS). Filtration Overview and basic concepts |
| I.S. EN ISO 13225:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13225:2012) |
| BS EN 62754:2017 | Computation of waveform parameter uncertainties |
| 14/30295048 DC : 0 | BS ISO 19229 - GAS ANALYSIS - PURITY ANALYSIS AND THE TREATMENT OF PURITY DATA |
| ISO 13168:2015 | Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting |
| CEI EN 62585 : 2013 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER |
| PD ISO/TR 13519:2012 | Guidance on the development and use of ISO statistical publications supported by software |
| BS EN ISO 1938-1:2015 | Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size |
| DD IEC/TS 60318-7:2011 | Electroacoustics. Simulators of human head and ear Head and torso simulator for the measurement of hearing aids |
| BS EN ISO 14720-1:2013 | Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials Infrared measurement methods |
| BS ISO 15769:2010 | Hydrometry. Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods |
| 14/30299349 DC : 0 | BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES |
| BS EN 16866:2017 | Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
| ISO 19918:2017 | Protective clothing — Protection against chemicals — Measurement of cumulative permeation of chemicals with low vapour pressure through materials |
| UNI EN ISO 14509-1 : 2009 | SMALL CRAFT - AIRBORNE SOUND EMITTED BY POWERED RECREATIONAL CRAFT - PART 1: PASS-BY MEASUREMENT PROCEDURES |
| 14/30294910 DC : 0 | BS EN 62047-26 ED1.0 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 26: DESCRIPTION AND MEASUREMENT METHODS FOR MICRO TRENCH AND NEEDLE STRUCTURES |
| BS EN 60645-7:2010 | Electroacoustics. Audiometric equipment Instruments for the measurement of auditory brainstem responses |
| PD ISO/TR 12134:2010 | Rubber. Estimation of uncertainty for test methods. Non-functional parameters |
| 16/30293109 DC : 0 | BS ISO 19361 - MEASUREMENT OF RADIOACTIVITY - DETERMINATION OF BETA EMITTERS ACTIVITIES - TEST METHOD USING LIQUID SCINTILLATION COUNTING |
| 12/30228765 DC : DRAFT JAN 2012 | BS ISO 13164-3 - WATER QUALITY - MEASUREMENT OF THE ACTIVITY CONCENTRATION OF RADON-222 - PART 3: EMANOMETRIC METHOD |
| BS ISO 29301:2017 | Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures |
| ISO/CIE 19476:2014 | Characterization of the performance of illuminance meters and luminance meters |
| DIN EN ISO 16911-1:2013-06 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013); German version EN ISO 16911-1:2013 |
| ISO/ASTM 52116:2013 | Practice for dosimetry for a self-contained dry-storage gamma irradiator |
| UNE-EN ISO 21258:2010 | Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010) |
| DIN EN ISO 9612:2009-09 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| UNE-EN 61094-8:2013 | Measurement microphones. Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison |
| 10/30194376 DC : 0 | BS EN 62585 ED.1 - ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN FREE-FIELD RESPONSE OF A SOUND LEVEL METER |
| BS ISO 21439:2009 | Clinical dosimetry. Beta radiation sources for brachytherapy |
| 11/30244464 DC : 0 | BS EN 50563 - EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES |
| UNE-EN 14793:2017 | Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method |
| 17/30368308 DC : 0 | BS EN 62271-109 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES |
| DIN EN ISO 3745:2012-07 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017) |
| 15/30323396 DC : 0 | BS 70000 - MEDICAL PHYSICS, CLINICAL ENGINEERING AND PHYSIOLOGICAL SCIENCE SERVICES IN HEALTHCARE - REQUIREMENTS FOR QUALITY, SAFETY AND COMPETENCE |
| DIN ISO 17123-4:2016-02 (Draft) | OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 4: ELECTRO-OPTICAL DISTANCE METERS (EDM MEASUREMENTS TO REFLECTORS) (ISO 17123-4:2012) |
| ISO/TR 14069:2013 | Greenhouse gases — Quantification and reporting of greenhouse gas emissions for organizations — Guidance for the application of ISO 14064-1 |
| UNI EN ISO 8015 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| 10/30217127 DC : 0 | BS EN 60645-2 ED 2 - AUDIOMETRIC EQUIPMENT - PART 2: EQUIPMENT FOR SPEECH AUDIOMETRY |
| DIN EN 12405-2:2012-10 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| DIN EN ISO 13385-2:2013-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011) |
| UNI EN ISO 9612 : 2011 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| BS EN ISO 12354-1:2017 | Building acoustics. Estimation of acoustic performance of buildings from the performance of elements Airborne sound insulation between rooms |
| UNI EN ISO 13138 : 2012 | AIR QUALITY - SAMPLING CONVENTIONS FOR AIRBORNE PARTICLE DEPOSITION IN THE HUMAN RESPIRATORY SYSTEM |
| 11/30230872 DC : 0 | BS EN 61689 - ULTRASONICS - PHYSIOTHERAPY SYSTEMS - FIELD SPECIFICATIONS AND METHODS OF MEASUREMENT IN THE FREQUENCY RANGE 0,5 MHZ TO 5 MHZ |
| PD CISPR/TR 16-4-1:2009 | Specification for radio disturbance and immunity measuring apparatus and methods Uncertainties, statistics and limit modelling. Uncertainties in standardized EMC tests |
| ISO 17201-3:2010 | Acoustics Noise from shooting ranges Part 3: Guidelines for sound propagation calculations |
| ISO 204:2009 | Metallic materials Uniaxial creep testing in tension Method of test |
| DIN EN ISO 16610-1:2015-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
| 14/30293554 DC : 0 | BS EN 15058 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
| BS EN 61788-15:2011 | Superconductivity Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies |
| BS ISO 16063-21 : 2003 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 21: VIBRATION CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER |
| IEC PAS 63151:2018 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Vector measurement-based systems (Frequency range of 30 MHz to 6 GHz) |
| 16/30346489 DC : 0 | BS ISO 20233-1 - SHIPS AND MARINE TECHNOLOGY - MODEL TEST METHOD FOR PROPELLER CAVITATION NOISE EVALUATION IN SHIP DESIGN - PART 1: SOURCE LEVEL ESTIMATION |
| DIN ISO 11040-4:2007-10 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| I.S. EN 16866:2017 | METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST) |
| PD ISO/TS 11665-13:2017 | Measurement of radioactivity in the environment. Air: radon 222 Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration test method |
| 11/30175582 DC : 0 | BS EN 60050-395 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 395: NUCLEAR INSTRUMENTATION - PHYSICAL PHENOMENA, BASIC CONCEPTS, INSTRUMENTS, SYSTEMS, EQUIPMENT AND DETECTORS |
| 13/30265725 DC : 0 | BS EN 61000-4-31 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-31: TESTING AND MEASUREMENT TECHNIQUES - AC MAINS PORTS BROADBAND CONDUCTED DISTURBANCE IMMUNITY TEST |
| 12/30247157 DC : 0 | BS ISO 14532 - NATURAL GAS - VOCABULARY |
| 17/30356728 DC : 0 | BS EN 12261 - GAS METERS - TURBINE GAS METERS |
| I.S. EN 62387-1:2012 | RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007 (MOD)) |
| I.S. EN 61966-5:2009 | MULTIMEDIA SYSTEMS AND EQUIPMENT - COLOUR MEASUREMENT AND MANAGEMENT - PART 5: EQUIPMENT USING PLASMA DISPLAY PANELS |
| ISO/TR 13014:2012 | Nanotechnologies Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| DD ISO/TS 23165:2006 | Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty |
| 11/30209557 DC : 0 | BS EN 62555 - ULTRASONICS - POWER MEASUREMENT - OUTPUT POWER MEASUREMENT FOR HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) TRANSDUCERS AND SYSTEMS |
| 09/30207082 DC : 0 | BS EN 50383:2002/FPRAA - BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ) |
| BS ISO 11352:2012 | Water quality. Estimation of measurement uncertainty based on validation and quality control data |
| BS EN ISO 13138:2012 | Air quality. Sampling conventions for airborne particle deposition in the human respiratory system |
| UNE-EN ISO 4064-2:2015 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
| BS EN ISO 18589-7:2016 | Measurement of radioactivity in the environment. Soil In situ measurement of gamma-emitting radionuclides |
| ISO 3650:1998 | Geometrical Product Specifications (GPS) — Length standards — Gauge blocks |
| CEI UNI EN ISO/IEC 17043 : 2011 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| PD IEC/TR 62617:2015 | Home laundry appliances. Uncertainty reporting of measurements |
| BS EN ISO 80000-1:2013 | Quantities and units General |
| CEI EN 60645-7 : 2013 | ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 7: INSTRUMENTS FOR THE MEASUREMENT OF AUDITORY BRAINSTEM RESPONSE |
| 13/30251870 DC : 0 | BS EN ISO 14253-5 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 5: UNCERTAINTY IN TESTING INDICATING MEASURING INSTRUMENTS |
| ECMA 108 : 6ED 2016 | DETERMINATION OF HIGH-FREQUENCY SOUND POWER LEVELS EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| ISO/ASTM 52628:2013 | Standard practice for dosimetry in radiation processing |
| NF ISO 24173 : 2009 | MICROBEAM ANALYSIS - GUIDELINES FOR ORIENTATION MEASUREMENT USING ELECTRON BACKSCATTER DIFFRACTION |
| ISO 16063-43:2015 | Methods for the calibration of vibration and shock transducers Part 43: Calibration of accelerometers by model-based parameter identification |
| ASA/ANSI S3.55 PART 1:2014(R2019) | ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 1: EAR SIMULATOR FOR THE MEASUREMENT OF SUPRA-AURAL AND CIRCUMAURAL EARPHONES |
| BS ISO 16063-42:2014 | Methods for the calibration of vibration and shock transducers Calibration of seismometers with high accuracy using acceleration of gravity |
| BS ISO 16063-16:2014 | Methods for the calibration of vibration and shock transducers Calibration by Earth’s gravitation |
| 16/30346354 DC : 0 | BS EN 60404-6 ED. 3.0 - MAGNETIC MATERIALS - PART 6: METHODS OF MEASUREMENT OF THE MAGNETIC PROPERTIES OF MAGNETICALLY SOFT METALLIC AND POWDER MATERIALS AT FREQUENCIES IN THE RANGE 20 HZ TO 100 KHZ BY THE USE OF RING SPECIMENS |
| NF EN 60318-4 : 2011 | ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 4: OCCLUDED-EAR SIMULATOR FOR THE MEASUREMENT OF EARPHONES COUPLED TO THE EAR BY MEANS OF EAR INSERTS |
| BS ISO 16063-31:2009 | Methods for the calibration of vibration and shock transducers Testing of transverse vibration sensitivity |
| 17/30323258 DC : 0 | BS ISO 4037-2 - RADIOLOGICAL PROTECTION - X AND GAMMA REFERENCE RADIATION FOR CALIBRATING DOSEMETERS AND DOSERATE METERS AND FOR DETERMINING THEIR RESPONSE AS A FUNCTION OF PHOTON ENERGY - PART 2: DOSIMETRY FOR RADIATION PROTECTION OVER THE ENERGY RANGES FROM 8 KEV TO 1,3 MEV AND 4 MEV TO 9 MEV |
| 09/30208585 DC : 0 | BS EN 61672-1 ED.2 - ELECTROACOUSTICS - SOUND LEVEL METERS - PART 1: SPECIFICATIONS |
| NF EN ISO 22007-3 : 2012 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD |
| 12/30267005 DC : 0 | BS IEC 60076-19 TS ED.1 - POWER TRANSFORMERS - PART 19: RULES FOR THE DETERMINATION OF UNCERTAINTIES IN THE MEASUREMENT OF THE LOSSES ON POWER TRANSFORMERS AND REACTORS |
| BS ISO 13163:2013 | Water quality. Lead-210. Test method using liquid scintillation counting |
| BS EN ISO 13199:2012 | Stationary source emissions. Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes. Non-dispersive infrared analyser equipped with catalytic converter |
| DIN EN ISO 6892-1:2017-02 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| 17/30323887 DC : 0 | BS EN 62990-131 - WORKPLACE ATMOSPHERES - PART 1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR TOXIC GASES |
| DIN EN ISO 3095:2014-07 | ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES (ISO 3095:2013) |
| PD ISO GUIDE 33:2015 | Reference materials. Good practice in using reference materials |
| PD ISO GUIDE 35:2017 | Reference materials. Guidance for characterization and assessment of homogeneity and stability |
| BS EN ISO 14064-1:2012 | Greenhouse gases Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals |
| BS EN ISO 25178-601:2010 | Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of contact (stylus) instruments |
| PD CEN/TS 16645:2014 | Ambient air. Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene |
| I.S. EN ISO 15530-3:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011) |
| BS ISO 13164-4:2015 | Water quality. Radon-222 Test method using two-phase liquid scintillation counting |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| INCITS/ISO TS 19159-1 : 2015 | GEOGRAPHIC INFORMATION - CALIBRATION AND VALIDATION OF REMOTE SENSING IMAGERY SENSORS AND DATA - PART 1: OPTICAL SENSORS |
| ISO 11040-4:2015 | Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| UNE-EN 62585:2013 | Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter |
| BS ISO 17733:2004 | Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| UNE 199072-1:2017 | Road traffic management equipment. Air monitoring stations on roads. Part 1: Functional characteristics. |
| BS EN 50383:2010 | Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz) |
| PREN 12261 : DRAFT 2017 | GAS METERS - TURBINE GAS METERS |
| BS PD ISO/TR 20461 : 2001 | DETERMINATION OF UNCERTAINITY FOR VOLUME MEASUREMENTS MADE USING THE GRAVIMETRIC METHOD |
| 18/30350765 DC : 0 | BS ISO 17735 - WORKPLACE ATMOSPHERES - DETERMINATION OF TOTAL ISOCYANATE GROUPS IN AIR USING 1-(9-ANTHRACENYLMETHYL)PIPERAZINE (MAP) REAGENT AND LIQUID CHROMATOGRAPHY |
| CEI EN 61788-11 : 2012 | SUPERCONDUCTIVITY - PART 11: RESIDUAL RESISTANCE RATIO MEASUREMENT - RESIDUAL RESISTANCE RATIO OF NB[3]SN COMPOSITE SUPERCONDUCTORS |
| DIN ISO 13473-5:2009-10 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
| UNE-EN 12405-2:2013 | Gas meters - Conversion devices - Part 2: Energy conversion |
| UNI CEN/TS 16645 : 2014 | AMBIENT AIR - METHOD FOR THE MEASUREMENT OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, DIBENZ[A,H]ANTHRACENE, INDENO[1,2,3-CD]PYRENE AND BENZO[GHI]PERYLENE |
| CSA C393 : 2012 : INC : UPD 1 : 2014 | TEST METHODS FOR MEASURING POWER CONSUMPTION IN LOW AND IDLE POWER MODES OF COMMERCIAL AND INDUSTRIAL EQUIPMENT |
| I.S. EN ISO 13160:2015 | WATER QUALITY - STRONTIUM 90 AND STRONTIUM 89 - TEST METHODS USING LIQUID SCINTILLATION COUNTING OR PROPORTIONAL COUNTING (ISO 13160:2012) |
| I.S. EN 1793-2:2012 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 2: INTRINSIC CHARACTERISTICS OF AIRBORNE SOUND INSULATION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| BS EN 50400 : 2006 | BASIC STANDARD TO DEMONSTRATE THE COMPLIANCE OF FIXED EQUIPMENT FOR RADIO TRANSMISSION (110 MHZ - 40 GHZ) INTENDED FOR USE IN WIRELESS TELECOMMUNICATION NETWORKS WITH THE BASIC RESTRICTIONS OR THE REFERENCE LEVELS RELATED TO GENERAL PUBLIC EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELDS, WHEN PUT INTO SERVICE |
| I.S. EN ISO 16859-1:2015 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015) |
| IES LM 79 SPANISH : 2008 | ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF SOLID-STATE LIGHTING PRODUCTS |
| CSA ISO/IEC 18047-2 : 2013 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 2: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ |
| NF EN 16682 : 2017 | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| BS ISO 5-4:2009 | Photography and graphic technology. Density measurements Geometric conditions for reflection density |
| NF ISO 27048 : 2011 | RADIATION PROTECTION - DOSE ASSESSMENT FOR THE MONITORING OF WORKERS FOR INTERNAL RADIATION EXPOSURE |
| 15/30326686 DC : 0 | BS ISO 20581 - WORKPLACE AIR - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| 17/30356883 DC : 0 | BS EN 61000-4-3 ED4 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIOFREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| PD ISO GUIDE 31:2015 | Reference materials. Contents of certificates, labels and accompanying documentation |
| I.S. EN 13032-4:2015 | LIGHT AND LIGHTING - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
| CAN/CSA-ISO/IEC TR 18047-7:12 (R2016) | Information technology - Radio frequency identification device conformance test methods - Part 7: Test methods for active air interface communications at 433 MHz (Adopted ISO/IEC TR 18047-7:2010, second edition, 2010-07-01) |
| ISO 23788:2012 | Metallic materials — Verification of the alignment of fatigue testing machines |
| UNE-EN 62475:2012 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
| I.S. EN 62475:2010 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
| IES LM 45 : 2015 | METHOD FOR THE ELECTRICAL AND PHOTOMETRIC MEASUREMENT OF GENERAL SERVICE INCANDESCENT FILAMENT LAMPS |
| I.S. EN ISO 8041-1:2017 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION - PART 1: GENERAL PURPOSE VIBRATION METERS (ISO 8041-1:2017) |
| I.S. EN 62047-26:2016 | SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 26: DESCRIPTION AND MEASUREMENT METHODS FOR MICRO TRENCH AND NEEDLE STRUCTURES |
| UNI EN ISO 15194 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| CSA ISO/IEC TR 18047-6 : 2013 : R2017 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 6: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ |
| CSA C61400-12-1:2007 | WIND TURBINES - PART 12-1: POWER PERFORMANCE MEASUREMENTS OF ELECTRICITY PRODUCING WIND TURBINES |
| ISO 5-4:2009 | Photography and graphic technology — Density measurements — Part 4: Geometric conditions for reflection density |
| CSA ISO 14064-1 : 2006 | GREENHOUSE GASES - PART 1: SPECIFICATION WITH GUIDANCE AT THE ORGANIZATION LEVEL FOR QUANTIFICATION AND REPORTING OF GREENHOUSE GAS EMISSIONS AND REMOVALS |
| BS EN ISO 13385-1:2011 | Geometrical product specifications (GPS). Dimensional measuring equipment Callipers; Design and metrological characteristics |
| IEEE 1528-2013 REDLINE | IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
| BS EN 50492 : 2008 | BASIC STANDARD FOR THE IN-SITU MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH RELATED TO HUMAN EXPOSURE IN THE VICINITY OF BASE STATIONS |
| EN 16913:2017 | Ambient air - Standard method for measurement of NO3¯, SO4²¯, Cl¯, NH4+, Na+, K+, Mg²+, Ca²+ in PM2,5 as deposited on filters |
| IEEE/ANSI C63.27-2017 | American National Standard for Evaluation of Wireless Coexistence |
| ANSI/AAMI/ISO 11137-3:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL |
| DIN EN ISO 17201-3:2010-06 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 3: GUIDELINES FOR SOUND PROPAGATION CALCULATIONS |
| I.S. EN 61260-2:2016 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS |
| PREN ISO 11608-1 : DRAFT 2010 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS |
| ISO/TS 13471-1:2017 | Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method |
| I.S. EN 55016-4-2:2011 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY |
| DIN EN 16450:2015-10 (Draft) | AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5) |
| ISO 18132-3:2011 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 3: Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage |
| SAE AIR 4951 : 2011 | TEST CELL THRUST MEASUREMENT |
| NF EN ISO 10846-5 : 2009 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace |
| ISO 362-3:2016 | Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Indoor testing M and N categories |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| BS EN ISO 29661:2017 | Reference radiation fields for radiation protection. Definitions and fundamental concepts |
| I.S. EN 12405-2:2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| 18/30346454 DC : 0 | BS ISO 21832 - WORKPLACE AIR - PROCEDURES FOR DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICLES |
| I.S. EN ISO 19238:2017 | RADIOLOGICAL PROTECTION - PERFORMANCE CRITERIA FOR SERVICE LABORATORIES PERFORMING BIOLOGICAL DOSIMETRY BY CYTOGENETICS (ISO 19238:2014) |
| UNI EN ISO 9493 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
| DIN EN 16909:2015-10 (Draft) | AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS |
| S.R. CEN ISO TR 24094:2007 | ANALYSIS OF NATURAL GAS - VALIDATION METHODS FOR GASEOUS REFERENCE MATERIALS |
| IEEE 1894-2015 | IEEE Guide for Online Monitoring and Recording Systems for Transient Overvoltages in Electric Power Systems |
| I.S. EN 61094-8:2012 | MEASUREMENT MICROPHONES - PART 8: METHODS FOR DETERMINING THE FREE-FIELD SENSITIVITY OF WORKING STANDARD MICROPHONES BY COMPARISON (IEC 61094-8:2012 (EQV)) |
| ISO 16399:2014 | Meters for irrigation water |
| I.S. EN ISO 12354-1:2017 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO 12354-1:2017) |
| I.S. EN 60154-4:2017 | FLANGES FOR WAVEGUIDES - PART 4: RELEVANT SPECIFICATIONS FOR FLANGES FOR CIRCULAR WAVEGUIDES |
| I.S. EN ISO 11665-2:2015 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 2: INTEGRATED MEASUREMENT METHOD FOR DETERMINING AVERAGE POTENTIAL ALPHA ENERGY CONCENTRATION OF ITS SHORT-LIVED DECAY PRODUCTS (ISO 11665-2:2012) |
| I.S. EN ISO 20785-1:2017 | DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 1: CONCEPTUAL BASIS FOR MEASUREMENTS (ISO 20785-1:2012) |
| I.S. EN 14793:2017 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| IEEE/ANSI C63.23-2012 | American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty |
| I.S. EN ISO 20785-2:2017 | DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 2: CHARACTERIZATION OF INSTRUMENT RESPONSE (ISO 20785-2:2011) |
| ISO/TS 20460:2015 | Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
| ISO/ASTM 51026:2015 | Practice for using the Fricke dosimetry system |
| BS PD CISPR/TR 16-4-5 : 2006 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-5: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - CONDITIONS FOR THE USE OF ALTERNATIVE TEST METHODS |
| ISO/TS 16840-12:2015 | Wheelchair seating Part 12: Apparatus and method for cushion envelopment testing |
| ISO 18946:2011 | Imaging materials — Reflection colour photographic prints — Method for testing humidity fastness |
| ISO/IEC TR 18047-7:2010 | Information technology Radio frequency identification device conformance test methods Part 7: Test methods for active air interface communications at 433 MHz |
| ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| API MPM CH22.1 : 2015 | Testing Protocols - General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids |
| CEI UNI CEN/TR 16469 : 2015 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
| UNE-EN ISO 16859-3:2016 | Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015) |
| ANSI S1.15-2 : 2005 | MEASUREMENT MICROPHONES - PART 2: PRIMARY METHOD FOR PRESSURE CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE |
| I.S. EN ISO 27971:2015 | CEREALS AND CEREAL PRODUCTS - COMMON WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF ALVEOGRAPH PROPERTIES OF DOUGH AT CONSTANT HYDRATION FROM COMMERCIAL OR TEST FLOURS AND TEST MILLING METHODOLOGY (ISO 27971:2015) |
| I.S. EN ISO 10360-10:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES (ISO 10360-10:2016) |
| S.R. CEN/TR 16338:2012 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - TEMPLATE FOR SUPPLYING INFORMATION ABOUT IMMUNOLOGICAL METHODS AND MOLECULAR BIOLOGICAL METHODS |
| I.S. EN ISO 13162:2015 | WATER QUALITY - DETERMINATION OF CARBON 14 ACTIVITY - LIQUID SCINTILLATION COUNTING METHOD (ISO 13162:2011) |
| I.S. EN 62209-1:2016 | MEASUREMENT PROCEDURE FOR THE ASSESSMENT OF SPECIFIC ABSORPTION RATE OF HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - PART 1: DEVICE USED NEXT TO THE EAR (FREQUENCY RANGE OF 300 MHZ TO 6 GHZ) |
| BS ISO 20903:2011 | Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results |
| I.S. EN 61094-5:2016 | ELECTROACOUSTICS - MEASUREMENT MICROPHONES - PART 5: METHODS FOR PRESSURE CALIBRATION OF WORKING STANDARD MICROPHONES BY COMPARISON |
| PREN 13771-2 : DRAFT 2016 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| UNI EN ISO 13385-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
| S.R. CEN/TS 15633-3:2012 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS BY IMMUNOLOGICAL METHODS - PART 3: QUANTITATIVE DETERMINATION OF HAZELNUT WITH AN ENZYME IMMUNOASSAY USING POLYCLONAL ANTIBODIES AND LOWRY PROTEIN DETECTION |
| I.S. EN ISO 16641:2016 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - RADON 220: INTEGRATED MEASUREMENT METHODS FOR THE DETERMINATION OF THE AVERAGE ACTIVITY CONCENTRATION USING PASSIVE SOLID-STATE NUCLEAR TRACK DETECTORS (ISO 16641:2014) |
| I.S. EN 62387:2016 | RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION |
| ES 202 706 : 1.4.1 | ENVIRONMENTAL ENGINEERING (EE); MEASUREMENT METHOD FOR POWER CONSUMPTION AND ENERGY EFFICIENCY OF WIRELESS ACCESS NETWORK EQUIPMENT |
| GS QKD 011 : 1.1.1 | QUANTUM KEY DISTRIBUTION (QKD); COMPONENT CHARACTERIZATION: CHARACTERIZING OPTICAL COMPONENTS FOR QKD SYSTEMS |
| EN ISO 20486:2018 | Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017) |
| I.S. EN 61788-4:2016 | SUPERCONDUCTIVITY - PART 4: RESIDUAL RESISTANCE RATIO MEASUREMENT - RESIDUAL RESISTANCE RATIO OF NB-TI AND NB[3]SN COMPOSITE SUPERCONDUCTORS |
| I.S. EN ISO 11665-7:2015 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 7: ACCUMULATION METHOD FOR ESTIMATING SURFACE EXHALATION RATE (ISO 11665-7:2012) |
| S.R. CEN ISO/TS 15530-1:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS (ISO/TS 15530-1:2013) |
| UNI EN 71-1 : 2015 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| BS EN ISO 25178-71:2017 | Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards |
| ISO/TR 13587:2012 | Three statistical approaches for the assessment and interpretation of measurement uncertainty |
| ISO 19970:2017 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Metering of gas as fuel on LNG carriers during cargo transfer operations |
| DIN EN 16913:2015-10 (Draft) | AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS |
| ISO 7503-2:2016 | Measurement of radioactivity - Measurement and evaluation of surface contamination Part 2: Test method using wipe-test samples |
| DIN EN 1793-2:2013-04 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 2: INTRINSIC CHARACTERISTICS OF AIRBORNE SOUND INSULATION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| EN ISO 15011-4:2018 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2017) |
| I.S. EN ISO 8015:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| ISO 18132-1:2011 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 1: Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage |
| ISO 27048:2011 | Radiation protection Dose assessment for the monitoring of workers for internal radiation exposure |
| BS EN ISO 20785-3:2017 | Dosimetry for exposures to cosmic radiation in civilian aircraft Measurements at aviation altitudes |
| BS EN ISO 204:2009 | Metallic materials. Uniaxial creep testing in tension. Method of test |
| NF EN ISO 15530-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS |
| ISO 16000-6:2011 | Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
| ISO/IEC 18046-4:2015 | Information technology Radio frequency identification device performance test methods Part 4: Test methods for performance of RFID gates in libraries |
| ISO/TS 11819-3:2017 | Acoustics Measurement of the influence of road surfaces on traffic noise Part 3: Reference tyres |
| UNI EN ISO 204 : 2009 | METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
| I.S. EN 388:2016 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
| ANSI S12.54:2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| ANSI S12.51:2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
| EN 62321-8:2017 | Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) |
| ANSI/ASA S12.57 : 2011(R2016) | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
| UNE-EN ISO 20785-2:2018 | Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011) |
| DIN EN ISO 11704:2015-11 | Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method (ISO 11704:2010) |
| I.S. EN ISO 17201-5:2010 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 5: NOISE MANAGEMENT |
| I.S. EN 55016-1-6:2015 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION |
| I.S. EN 62754:2017 | COMPUTATION OF WAVEFORM PARAMETER UNCERTAINTIES |
| UNI EN ISO 4373 : 2009 | HYDROMETRY - WATER LEVEL MEASURING DEVICES |
| EN ISO 20785-1:2017 | Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 1: Conceptual basis for measurements (ISO 20785-1:2012) |
| ANSI/ASA S3.7 : 2016 | METHOD FOR MEASUREMENT AND CALIBRATION OF EARPHONES |
| I.S. EN 62810:2015 | CYLINDRICAL CAVITY METHOD TO MEASURE THE COMPLEX PERMITTIVITY OF LOW-LOSS DIELECTRIC RODS |
| ANSI S12.55 : 2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS |
| CSA C22.2 No. 80601-2-61 : 2014(R2019) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
| UNI EN ISO 16610-85 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION |
| ANSI S12.56 : 2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE |
| ISO 16254:2016 | Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method |
| UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| 16/30345825 DC : 0 | BS EN 1793-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 2: INTRINSIC CHARACTERISTICS OF AIRBORNE SOUND INSULATION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| ISO 22514-1:2014 | Statistical methods in process management — Capability and performance — Part 1: General principles and concepts |
| ANSI/ASA S3.55 PART 3 : 2014 | ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 3: ACOUSTIC COUPLER FOR THE CALIBRATION OF SUPRA-AURAL EARPHONES USED IN AUDIOMETRY |
| UNE-EN 61215-1:2017 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements |
| UNE-ISO 16399:2016 | Meters for irrigation water |
| I.S. EN 61083-2:2013 | INSTRUMENTS AND SOFTWARE USED FOR MEASUREMENT IN HIGH-VOLTAGE AND HIGH-CURRENT TESTS - PART 2: REQUIREMENTS FOR SOFTWARE FOR TESTS WITH IMPULSE VOLTAGES AND CURRENTS (IEC 61083-2:2013 (EQV)) |
| EN 12102-1:2017 | Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and cooling, dehumidifiers and process chillers |
| CEN/TR 16193:2013 | Sludge, treated biowaste and soil - Detection and enumeration of Escherichia coli |
| ASTM E 3064 : 2016 | Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose (Withdrawn 2025) |
| BS EN 62751-2:2014 | Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems Modular multilevel converters |
| CEI EN 60060-2 : 2015 | HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS |
| UNI EN ISO 25140 : 2010 | STATIONARY SOURCE EMISSIONS - AUTOMATIC METHOD FOR THE DETERMINATION OF THE METHANE CONCENTRATION USING FLAME IONISATION DETECTION (FID) |
| ISO 10302-1:2011 | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 14792:2017 | Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence |
| ISO 16610-61:2015 | Geometrical product specification (GPS) — Filtration — Part 61: Linear areal filters — Gaussian filters |
| UNI EN 1793-2 : 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 2: INTRINSIC CHARACTERISTICS OF AIRBORNE SOUND INSULATION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| I.S. EN ISO 11771:2010 | AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
| EN 1793-2:2012 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions |
| ASTM E 2823 : 2017 : REDLINE | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based) |
| ISO 15194:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
| UNE-EN ISO 9697:2017 | Water quality - Gross beta activity in non-saline water - Test method using thick source (ISO 9697:2015) |
| IEC 62301:2011 | Household electrical appliances - Measurement of standby power |
| EN ISO 19918:2017 | Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017) |
| ISO 16578:2013 | Molecular biomarker analysis — General definitions and requirements for microarray detection of specific nucleic acid sequences |
| BS EN ISO 6145-7:2010 | Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Thermal mass-flow controllers |
| UNE-EN ISO 10704:2016 | Water quality - Measurement of gross alpha and gross beta activity in non-saline water - Thin source deposit method (ISO 10704:2009) |
| I.S. EN 61788-12:2013 | SUPERCONDUCTIVITY - PART 12: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO NON-COPPER VOLUME RATIO OF NB[3]SN COMPOSITE SUPERCONDUCTING WIRES (IEC 61788-12:2013 (EQV)) |
| DIN EN ISO 20486:2016-10 (Draft) | NON-DESTRUCTIVE TESTING - LEAK TESTING - CALIBRATION OF REFERENCE LEAKS FOR GASES (ISO/DIS 20486:2016) |
| IEC 62792:2015 | Measurement method for the output of electroshock weapons |
| BS EN 60456:2016 | Clothes washing machines for household use. Methods for measuring the performance |
| EN ISO 10360-10:2016 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| I.S. EN 50400:2006 | BASIC STANDARD TO DEMONSTRATE THE COMPLIANCE OF FIXED EQUIPMENT FOR RADIO TRANSMISSION (110 MHZ - 40 GHZ) INTENDED FOR USE IN WIRELESS TELECOMMUNICATION NETWORKS WITH THE BASIC RESTRICTIONS OR THE REFERENCE LEVELS RELATED TO GENERAL PUBLIC EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELDS, WHEN PUT INTO SERVICE |
| I.S. EN 61788-11:2011 | SUPERCONDUCTIVITY - PART 11: RESIDUAL RESISTANCE RATIO MEASUREMENT - RESIDUAL RESISTANCE RATIO OF NB[3]SN COMPOSITE SUPERCONDUCTORS |
| ISO 14934-2:2013 | Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods |
| ISO/IEC 18047-2:2012 | Information technology — Radio frequency identification device conformance test methods — Part 2: Test methods for air interface communications below 135 kHz |
| I.S. EN 15991:2015 | TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV) |
| ISO 9123:2017 | Hydrometry — Stage-fall-discharge relationships |
| I.S. EN ISO 16664:2017 | GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017) |
| ISO 8672:2014 | Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy — Membrane filter method |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO 6487:2015 | Road vehicles — Measurement techniques in impact tests — Instrumentation |
| ISO/ASTM 51631:2013 | Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations |
| I.S. EN ISO 6416:2017 | HYDROMETRY - MEASUREMENT OF DISCHARGE BY THE ULTRASONIC TRANSIT TIME (TIME OF FLIGHT) METHOD (ISO 6416:2017) |
| ISO 1438:2017 | Hydrometry — Open channel flow measurement using thin-plate weirs |
| DIN EN ISO 3743-1:2011-01 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| I.S. EN ISO 7500-1:2018 | METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION -TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCEMEASURING SYSTEM (ISO 7500-1:2018) |
| ISO 10505:2009 | Photography — Root mean square granularity of photographic films — Method of measurement |
| I.S. EN 61000-4-22:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-22: TESTING AND MEASUREMENT TECHNIQUES - RADIATED EMISSION AND IMMUNITY MEASUREMENTS IN FULLY ANECHOIC ROOMS (FARS) |
| I.S. EN ISO 25178-601:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| ISO 22514-8:2014 | Statistical methods in process management Capability and performance Part 8: Machine performance of a multi-state production process |
| I.S. EN ISO 25178-602:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| I.S. EN 61094-3:2016 | ELECTROACOUSTICS - MEASUREMENT MICROPHONES - PART 3: PRIMARY METHOD FOR FREE-FIELD CALIBRATION OF LABORATORY STANDARDMICROPHONES BY THE RECIPROCITY TECHNIQUE |
| EN ISO 11665-6:2015 | Measurement of radioactivity in the environment - Air: radon-222 - Part 6: Spot measurement method of the activity concentration (ISO 11665-6:2012) |
| EN 50492 : 2008 AMD 1 2014 | BASIC STANDARD FOR THE IN-SITU MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH RELATED TO HUMAN EXPOSURE IN THE VICINITY OF BASE STATIONS |
| EN 60404-15:2012/A1:2017 | MAGNETIC MATERIALS - PART 15: METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS (IEC 60404-15:2012/A1:2016) |
| UNE-EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997) |
| EN 61005:2017 | Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters |
| EN ISO 11665-3:2015 | Measurement of radioactivity in the environment - Air: radon-222 - Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products (ISO 11665-3:2012) |
| EN 62127-1:2007/A1:2013 | ULTRASONICS - HYDROPHONES - PART 1: MEASUREMENT AND CHARACTERIZATION OF MEDICAL ULTRASONIC FIELDS UP TO 40 MHZ (IEC 62127-1:2007/A1:2013) |
| DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| DIN EN ISO 10846-2:2008-11 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| BS EN 1793-1:2017 | Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics of sound absorption under diffuse sound field conditions |
| BS EN ISO 11202:2010 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| IEC 61000-4-21:2011 | Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
| ISO 25178-601:2010 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments |
| ISO 22476-7:2012 | Geotechnical investigation and testing — Field testing — Part 7: Borehole jack test |
| ISO/TS 7849-2:2009 | Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor |
| ISO 22007-4:2017 | Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method |
| ISO 13138:2012 | Air quality — Sampling conventions for airborne particle deposition in the human respiratory system |
| ISO/TS 13530:2009 | Water quality — Guidance on analytical quality control for chemical and physicochemical water analysis |
| ISO 148-3:2016 | Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 9295:2015 | Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment |
| BS EN ISO 6508-1:2015 | Metallic materials. Rockwell hardness test Test method |
| UNE-EN ISO 22674:2016 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
| BS EN ISO 22674:2016 | Dentistry. Metallic materials for fixed and removable restorations and appliances |
| ISO 19901-5:2016 | Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction |
| IEC 62359:2010+AMD1:2017 CSV | Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields |
| 12/30263512 DC : 0 | BS EN ISO 9806 - SOLAR ENERGY - SOLAR THERMAL COLLECTORS - TEST METHODS |
| UNE-EN ISO 10523:2012 | Water quality - Determination of pH (ISO 10523:2008) |
| BS EN 15058:2017 | Stationary source emissions. Determination of the mass concentration of carbon monoxide. Standard reference method: non-dispersive infrared spectrometry |
| BS EN ISO 3745 : 2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS |
| BS EN ISO 14577-4:2016 | Metallic materials. Instrumented indentation test for hardness and materials parameters Test method for metallic and non-metallic coatings |
| ISO 11608-5:2012 | Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions |
| BS EN ISO 9614-3:2009 | Acoustics. Determination of sound power levels of noise sources using sound intensity Precision method for measurement by scanning |
| BS EN 13804:2013 | Foodstuffs. Determination of elements and their chemical species. General considerations and specific requirements |
| BS EN ISO 11608-1:2015 | Needle-based injection systems for medical use. Requirements and test methods Needle-based injection systems |
| BS EN 1811 : 2011 | REFERENCE TEST METHOD FOR RELEASE OF NICKEL FROM ALL POST ASSEMBLIES WHICH ARE INSERTED INTO PIERCED PARTS OF THE HUMAN BODY AND ARTICLES INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN |
| ISO 1938-2:2017 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges |
| BS EN ISO 10012:2003 | Measurement management systems. Requirements for measurement processes and measuring equipment |
| BS EN ISO 19901-5:2016 | Petroleum and natural gas industries. Specific requirements for offshore structures Weight control during engineering and construction |
| ISO 17534-1:2015 | Acoustics Software for the calculation of sound outdoors Part 1: Quality requirements and quality assurance |
| IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
| IEC 62209-2:2010 | Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV | High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
| BS EN ISO 11205:2009 | Acoustics. Noise emitted by machinery and equipment. Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
| BS EN 13771-2:2017 | Compressors and condensing units for refrigeration. Performance testing and test methods Condensing units |
| BS EN ISO 1:2016 | Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties |
| ISO 6789:2003 | Assembly tools for screws and nuts Hand torque tools Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
| BS EN 1267:2012 | Industrial valves. Test of flow resistance using water as test fluid |
| ISO 16664:2017 | Gas analysis — Handling of calibration gases and gas mixtures — Guidelines |
| IEC 61746-2:2010 | Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 11665-1:2012 | Measurement of radioactivity in the environment Air: radon-222 Part 1: Origins of radon and its short-lived decay products and associated measurement methods |
| ISO 10703:2007 | Water quality Determination of the activity concentration of radionuclides Method by high resolution gamma-ray spectrometry |
| DIN EN 12102:2013-10 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
| EN 482:2012+A1:2015 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| CEN/TS 13649:2014 | Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption |
| DIN EN 14154-3:2011-06 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| EN 61400-13:2016 | Wind turbines - Part 13: Measurement of mechanical loads |
| EN 61966-5:2009 | Multimedia systems and equipment - Colour measurement and management - Part 5: Equipment using plasma display panels |
| EN 61788-11:2011 | Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors |
| CEN/TS 16272-5:2014 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions |
| DIN EN ISO 3745:2017-10 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017) |
| EN 60794-1-20:2014 | Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions |
| EN ISO 8253-3:2012 | Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012) |
| EN 13201-4:2015 | Road lighting - Part 4: Methods of measuring lighting performance |
| DIN EN ISO 204:2009-10 | METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
| EN 61788-13:2012 | Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites |
| BS 8888:2017 | Technical product documentation and specification |
| EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
| DIN EN 16523-2:2015-04 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| EN 60904-4:2009 | Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability |
| EN 61757-1:2012 | Fibre optic sensors - Part 1: Generic specification |
| EN 61280-1-1:2013 | Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable |
| EN 60846-1:2014 | Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors |
| EN 16450:2017 | Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) |
| DIN EN ISO 3611:2011-03 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
| IEC 61400-12-1:2017 RLV | Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines |
| EN 55016-1-6:2015/A1:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION (CISPR 16-1-6:2014/A1:2017) |
| EN 61260-3:2016 | Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests |
| EN 50379-2:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment |
| EN 61788-15:2011 | Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies |
| EN 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| EN 50563:2011/A1:2013 | EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES |
| EN 61788-6:2011 | Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors |
| EN 60318-4:2010 | Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts |
| DIN EN ISO 6789-2:2017-07 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINTY (ISO 6789-2:2017) |
| EN 60318-3:2015 | Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry |
| EN 61000-4-21:2011 | Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| DIN EN ISO 8311:2014-03 | REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - CALIBRATION OF MEMBRANE TANKS AND INDEPENDENT PRISMATIC TANKS IN SHIPS - MANUAL AND INTERNAL ELECTRO-OPTICAL DISTANCE-RANGING METHODS (ISO 8311:2013) |
| DIN EN ISO 5436-2:2013-04 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012) |
| EN 61788-12:2013 | Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires |
| EN 12405-3:2015 | Gas meters - Conversion devices - Part 3: Flow computer |
| EN 61672-2:2013/A1:2017 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017) |
| CEN/TR 17078:2017 | Stationary source emissions - Guidance on the application of EN ISO 16911-1 |
| CEN/TS 16272-7:2015 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 7: Extrinsic characteristics - In situ values of insertion loss |
| EN 61000-4-22:2011 | Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emission and immunity measurements in fully anechoic rooms (FARs) |
| CEN ISO/TS 15530-1:2013 | Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013) |
| EN 61674:2013 | Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| BS 8888:2013 | Technical product documentation and specification |
| DIN EN ISO 6141:2015-07 | GAS ANALYSIS - CONTENTS OF CERTIFICATES FOR CALIBRATION GAS MIXTURES (ISO 6141:2015) |
| CEN/TR 17055:2017 | Workplace exposure - Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN 13936 - Choice of procedures |
| IEC 60404-10:2016 RLV | Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies |
| EN 1793-4:2015 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction |
| EN 62555:2014 | Ultrasonics - Power measurement - High intensity therapeutic ultrasound (HITU) transducers and systems |
| DIN ISO 11040-4:2017-07 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| DIN EN 14790:2017-05 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| EN 62209-2:2010 | Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
| DIN EN ISO 6974-5:2002-06 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 5: ISOTHERMAL METHOD FOR NITROGEN, CARBON DIOXIDE, C[1] TO C[5] HYDROCARBONS AND C[6+] HYDROCARBONS (ISO 6974-5:2014) |
| EN 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
| DIN EN ISO 6145-7:2011-03 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 7: THERMAL MASS-FLOW CONTROLLERS |
| EN 61215-1:2016 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements |
| EN 62522:2014 | Calibration of tuneable laser sources |
| DIN EN ISO 22007-4:2012-04 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017) |
| EN 60118-0:2015 | Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids |
| EN 61377:2016 | Railway applications - Rolling stock - Combined test method for traction Systems |
| EN 60731:2012 | Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy |
| EN 61788-19:2014 | Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors |
| EN 62359:2011/A1:2018 | ULTRASONICS - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS |
| DIN EN ISO 148-1:2017-05 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
| CEN/TS 16645:2014 | Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene |
| CEN/TS 15633-3:2012 | Foodstuffs - Detection of food allergens by immunological methods - Part 3: Quantitative determination of hazelnut with an enzyme immunoassay using polyclonal antibodies and Lowry protein detection |
| EN 60318-1:2009 | Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones |
| EN 50400 : 2006 AMD 1 2012 | BASIC STANDARD TO DEMONSTRATE THE COMPLIANCE OF FIXED EQUIPMENT FOR RADIO TRANSMISSION (110 MHZ - 40 GHZ) INTENDED FOR USE IN WIRELESS TELECOMMUNICATION NETWORKS WITH THE BASIC RESTRICTIONS OR THE REFERENCE LEVELS RELATED TO GENERAL PUBLIC EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELDS, WHEN PUT INTO SERVICE |
| EN 62058-31:2010 | Electricity metering equipment (a.c.) - Acceptance inspection - Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C) |
| EN 62810:2015 | Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods |
| CEN/TR 16469:2013 | Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements |
| EN 60601-2-62:2015 | Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
| EN 60645-1:2017 | Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry |
| EN 50629:2015/A2:2018 | ENERGY PERFORMANCE OF LARGE POWER TRANSFORMERS (U[M] > 36 KV OR S[R] >= 40 MVA) |
| EN 60645-6:2010 | Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions |
| ASME EA 4G:2010 | GUIDANCE FOR ASME EA-4, ENERGY ASSESSMENT FOR COMPRESSED AIR SYSTEMS |
| ASME EA 4G : 2010 : R2015 | GUIDANCE FOR ASME EA-4, ENERGY ASSESSMENT FOR COMPRESSED AIR SYSTEMS |
| ASME B89.7.2 : 2014 | DIMENSIONAL MEASUREMENT PLANNING |
| NS-EN 14662-1:2023 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography |
| NS-EN ISO 2612:2023 | Analysis of natural gas - Biomethane - Determination of ammonia content by Tuneable Diode Laser Absorption Spectroscopy (ISO 2612:2023) |
| NS-EN 15267-4:2023 | Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources |
| NS-EN ISO 6508-1:2023 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023) |
| DKD-R 4-4 : 2009 | KALIBRIEREN VON NORMALEN UND MESSGERAETEN FUER DIE FORMMESSTECHNIK |
| ASME B89.1.9 : 2002 : R2007 | GAGE BLOCKS |
| DKD-R 4-3-1 : 1999 | CALIBRATION OF MEASURING AND TEST EQUIPMENT FOR GEOMETRICAL MEASURANDS - SHEET 1: FUNDAMENTALS |
| DKD-R 3-1-2 : 2010 | KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - BLATT 2: STOSSANREGUNG |
| ECMA 275-2 : 4ED 2017 | MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENT |
| CSA ISO 10012 : 2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| ASME MFC7 : 2016 | MEASUREMENT OF GAS FLOW BY MEANS OF CRITICAL FLOW VENTURIS AND CRITICAL FLOW NOZZLES |
| IFI 301 : 2008 | GAGE CALIBRATION REQUIREMENTS AND PROCEDURES FOR THREAD GAGES |
| ASME B89.1.9 : 2002 : INC : ERR 1 : 2003 : R2007 | GAGE BLOCKS |
| CAN/CSA-IEC 61000-4-6:15 (R2018) | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radiofrequency fields (Adopted IEC 61000-4-6:2013, fourth edition, 2013-10) | Compatibilité électromagnétique (CEM) - Partie 4-6 : Techniques d\'essai et de mesure - Immunité aux perturbations conduites, induites par les champs radioélectriques (norme IEC 61000-4-6:2013 adoptée, quatrième édition, 2013-10) |
| ONORM ONR CEN/TS 16272-5 : 2014 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS (CEN/TS 16272-5:2014) |
| ASME B89.1.9 : 2002 : INC : ERR 1 : 2002 | GAGE BLOCKS |
| ASME B89.1.17 : 2001 : R2017 | MEASUREMENT OF THREAD MEASURING WIRES |
| ASME B89.7.1 : 2016 | GUIDELINES FOR ADDRESSING MEASUREMENT UNCERTAINTY IN THE DEVELOPMENT AND APPLICATION OF ASME B89 STANDARDS |
| UNE-EN ISO 11204:2010 V2 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| ONORM EN 16272-6 : 2014 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
| ECMA-74:2022 | Measurement of Airborne Noise emitted by Information Technology and Telecommunications Equipment |
| ASME PTC19.1 : 2013 | TEST UNCERTAINTY |
| ASME B89.1.8 : 2011 | PERFORMANCE EVALUATION OF DISPLACEMENT-MEASURING LASER INTERFEROMETERS |
| ASME B89.1.8 : 2011 : R2016 | PERFORMANCE EVALUATION OF DISPLACEMENT-MEASURING LASER INTERFEROMETERS |
| ASME MFC 26 : 2011(R2018) | MEASUREMENT OF GAS FLOW BY BELLMOUTH INLET FLOWMETERS |
| CEI EN IEC 62321-3-4:2023 | Determination of certain substances in electrotechnical products Part 3-4: Screening - Phthalates in polymers of electrotechnical products by high performance liquid chromatography with ultraviolet detector (HPLCUV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS) |
| SAE AIR4951A | Test Cell Thrust Measurement |
| ASME PTC36 : 2004 : R2013 | PERFORMANCE TEST CODES - MEASUREMENT OF INDUSTRIAL SOUND |
| ASME V&V 20 : 2009 | STANDARD FOR VERIFICATION AND VALIDATION IN COMPUTATIONAL FLUID DYNAMICS AND HEAT TRANSFER |
| ASA/ANSI S3.55:2023/Part 8/IEC 60318-8:2022 | Electroacoustics - Simulators of human head and ear - Part 8: Acoustic coupler for high-frequency measurements of hearing aids and earphones coupled to the ear by means of ear inserts |
| ASA/ANSI S1.20:2012(R2020) | American National Standard Procedures for Calibration of Underwater Electroacoustic Transducers |
| I.S. EN IEC 62271-100:2021+AC:2024-02 | High-voltage switchgear and controlgear - Part 100: Alternatingcurrent circuit-breakers (IEC 62271-100:2021/COR3:2024) |
| CEI EN IEC 61000-2-4:2024-10 | Electromagnetic compatibility (EMC) – Part 2-4: Environment - Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances |
| CEI EN IEC 62271-100:2022 | High-voltage switchgear and controlgear Part 100: Alternating current circuit-breakers |
| CEI EN IEC 61674:2024-10 | Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| DKD-R 6-1 : 2014 | CALIBRATION OF PRESSURE GAUGES |
| UNE-EN ISO 11202:2010 V2 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| ASME B89.1.17 : 2001 | MEASUREMENT OF THREAD MEASURING WIRES |
| UNE-EN ISO 11665-2:2016 | Measurement of radioactivity in the environment - Air: radon-222 - Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products (ISO 11665-2:2012) |
| ASME V&V 20 : 2009 : R2016 | STANDARD FOR VERIFICATION AND VALIDATION IN COMPUTATIONAL FLUID DYNAMICS AND HEAT TRANSFER |
| ASME PTC36 : 2004 | PERFORMANCE TEST CODES - MEASUREMENT OF INDUSTRIAL SOUND |
| ASME B89.1.17 : 2001 : R2007 | MEASUREMENT OF THREAD MEASURING WIRES |
| CSA ISO 10012 : 2003 : R2013 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| ASME B89.1.9 : 2002 : INC : ERR 1 : 2003-12 : R2012 | GAGE BLOCKS |
| AS 5339:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment |
| AS 1391:2020 | Metallic materials - Tensile testing - Method of test at room temperature |
| AS 5337:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane |
| AS 4133.0:2019 | Methods of testing rocks for engineering purposes General requirements and list of methods |
| AS IEC 61260.3:2019 | Electroacoustics - Octave-band and fractional-octave-band filters Periodic tests |
| AS IEC 62475:2019 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
| AS/NZS ISO 19116:2020 | Geographic information - Positioning services |
| AS 5336:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi - anechoic rooms |
| AS 5335:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane |
| AS ISO 9296:2019 | Acoustics - Declared noise emission values of information technology and telecommunications equipment |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| AS IEC 61260.2:2019 | Electroacoustics - Octave-band and fractional-octave-band filters Pattern evaluation tests |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| AS 3580.19:2020 | Methods for sampling and analysis of ambient air Ambient air quality data validation and reporting |
| AS/NZS ISO 8253.3:2019 | Acoustics - Audiometric test methods Speech audiometry |
| AS 5333.1:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields Comparison method for a hard-walled test room |
| AS ISO 532.2:2019 | Acoustics - Methods for calculating loudness Moore-Glasberg method |
| AS/NZS 2442.1:2021 | Performance of household electrical appliances - Rotary clothes dryers Methods for measuring performance, energy and water consumption |
| AS ISO 532.1:2019 | Acoustics - Methods for calculating loudness Zwicker Method |
| SA TR IEC 63170:2020 | Measurement procedure for the evaluation of power density related to human exposure to radio frequency fields from wireless communication devices operating between 6 GHz and 100 GHz |
| AS/NZS 61724.1:2020 | Photovoltaic system performance Monitoring (IEC 61724-1:2017, MOD) |
| AS/NZS 2007.1:2021 | Performance of household electrical appliances - Dishwashers Methods for measuring performance, energy and water consumption |
| AS IEC 62209.3:2020 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Vector measurement-based systems (Frequency range of 600 MHz to 6 GHz) |
| AS/NZS 2040.1:2021 | Performance of household electrical appliances - Clothes washing machines Methods for measuring performance, energy and water consumption |
| AS/NZS 4760:2019 | Procedure for specimen collection and the detection and quantification of drugs in oral fluid |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| AS ISO 9295:2019 | Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment |
| SA/SNZ TS 61724.3:2020 | Photovoltaic system performance Energy evaluation method (IEC TS 61724-3:2016, MOD) |
| SA/SNZ TS ISO 19159.3:2019 | Geographic information - Calibration and validation of remote sensing imagery sensors and data SAR/InSAR |
| AS 5333.2:2019 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms |
| AS/NZS ISO 8253.1:2019 | Acoustics - Audiometric test methods Pure-tone air and bone conduction audiometry |
| AS CISPR 16.1.1:2020 | Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Measuring apparatus (CISPR 16-1-1:2019 (ED 5.0) MOD) |
| AS 5332:2019 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards |
| AS IEC 61260.1:2019 | Electroacoustics - Octave-band and fractional-octave-band filters Specifications |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Important note : Users cannot be edited or removed once added to your Multi user PDF.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.